Problem: As in f85bc41, assume unfocusable windows to be UI windows
whose buffer content is unexpectedly included in 'complete'
"w" completion.
Solution: Exclude unfocusable windows when looping over windows.
(cherry picked from commit d01b2611a6)
Problem:
Some language servers do not work properly without a workspace folder.
Solution:
Add `workspace_required`, which skips starting the lsp client if no
workspace folder is found.
Co-authored-by: Michael Strobel <71396679+Kibadda@users.noreply.github.com>
Problem: Undo corrupted with 'completeopt' "preinsert" when switching
buffer or window.
Solution: Do not delete preinsert text when switching buffer or window.
(zeertzjq)
related: neovim/neovim#33581closes: vim/vim#171931343681aba
(cherry picked from commit 63689deb45)
Problem: Change applied in d3e495ce uses a byte-offset where a virtual
column is expected.
Solution: Set the cursor directly through a <Cmd> mapping, while making
sure the commands are ordered correctly by adding them to the
type-ahead buffer.
(cherry picked from commit 019b2050e1)
Problem: When switching to another window or tab page while the
completion menu is active, the menu stays visible, although it
belongs to the previous window/tab page context (Evgeni
Chasnovski).
Solution: Track the window and tab page where completion started. Detect
changes in the main editing loop and cancel completion mode if
the current window or tab page differs from where completion
started.
fixes: vim/vim#17090closes: vim/vim#17101cf7f01252f
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
Neovim disables a number of terminal modes when it exits, some of which
cause the terminal to send asynchronous events to Neovim. It's possible
that Neovim exits before the terminal has received and processed all of
the sequences to disable these modes, causing the terminal to emit one
of these asynchronous sequences after Neovim has already exited. If this
happens, then the sequence is received by the user's shell (or some
other program that is not Neovim).
Solution:
When Neovim exits, it now emits a Device Attributes request (DA1)
after disabling all of the different modes. When the terminal responds
to this request we know that it has already received all of our other
sequences disabling the other modes. At that point, it should not be
emitting any further asynchronous sequences. This means the process of
exiting Neovim is now asynchronous as well since it depends on receiving
the DA1 response from the terminal.
(cherry picked from commit 82f08f33c1)
Problem: When iterating in reverse with {start} > {end} in
`nvim_buf_get_extmarks()`, marks that overlap {start} and are
greater than {end} are included in the return value twice.
Marks that overlap {end} and do not overlap {start} are not
not included in the return value at all. Marks are not
actually returned in a meaningful "traversal order".
Solution: Rather than actually iterating in reverse, (also possible but
requires convoluted conditions and would require fetching
overlapping marks for both the {start} and {end} position,
while still ending up with non-traversal ordered marks),
iterate normally and reverse the return value.
(cherry picked from commit 65170e8dad)
Problem: :set opt1 opt2... emits a separate event for each option.
Solution: Only set the kind for the first printed option value.
(cherry picked from commit 986b92eb07)
Problem: tests: test_mksession does not consider XDG_CONFIG_HOME
Solution: allow to match $HOME/.vim/ and $HOME/.config/vim for &viewdir
(John M Devin)
closes: vim/vim#156395b9237c2e7
Co-authored-by: John M Devin <john.m.devin@gmail.com>
(cherry picked from commit 0eb708aa8a)
Problem: Amiga: default 'viewdir' may not work.
Solution: Use "home:" instead of "$VIM". Add a test. (Christian Brabandt,
closesvim/vim#12576)
b8b1c8ebd4
Cherry-pick Test_mkview_manual_fold() changes from 9.0.{0363,0626}.
Co-authored-by: Christian Brabandt <cb@256bit.org>
(cherry picked from commit 827cfe4a76)
Problem: Duplicate check for preinsert effect, particularly for Ctrl_w
and Ctrl_U.
Solution: Remove the specific check for Ctrl_w and Ctrl_U to eliminate
redundancy (glepnir).
closes: vim/vim#171291c2b258250
Co-authored-by: glepnir <glephunter@gmail.com>
(cherry picked from commit f9f6dc4262)
Problem:
`vim.lsp.buf.[implementation|definition|...]({ reuse_win = true })` does not
jump cursor to existing window if buffer is already open.
Steps to reproduce:
1. `nvim repro.lua`
2. Insert anything that lsp can read to open the library definition/implementation, e.g., `vim.keymap.set`
3. open `repro.lua` buffer and the library buffer side by side.
4. type `gd` over `set` to jump to the library definition.
The open buffer is scrolled to the target line, but cursor does not jump.
Solution:
Call nvim_set_current_win if necessary.
(cherry picked from commit 6926fc1615)
Problem:
When a command is not found or not executable, the error message gives
no indication about what command was actually tried.
Solution:
Always append the command name to the error message.
BEFORE:
E5108: Error executing lua …/_system.lua:248: ENOENT: no such file or directory
AFTER:
E5108: Error executing lua …/_system.lua:249: ENOENT: no such file or directory: "foo"
fix#33445
(cherry picked from commit 223ac7782e)
Problem:
When doing paste operation mouse code tries to figure out it it is
dealing with a multi-line register by calling yank_register_mline(),
which fetches register data and checks its type. Later the code calls
either do_put() or insert_reg() which fetch register data again. This is
unnoticeable when working with internal neovim registers, but starts
hurting when dealing with clipboards, especially remote one (forwarded X
or socket tunnel or similar).
Solution:
Change yank_register_mline() to also return pointer to the
register structure prepared for pasting, and insert_reg() to accept
such register pointer and use it if it is supplied. do_put() already
has support for accepting a register structure to be used for pasting.
Fixes#33493
(cherry picked from commit 7432781e71)
Problem: missing out-of-memory check in linematch.c
Solution: return early in case of memory allocation failure, move the
pow() calculation ouside of the for() loop
(John Marriott)
closes: vim/vim#171182137710b43
Co-authored-by: John Marriott <basilisk@internode.on.net>
(cherry picked from commit d2d1b5e944)
Problem: Line number corrected for conceal_lines may be set beyond eob
when the last buffer line is concealed, causing ml_get errors.
Solution: Avoid setting line number beyond eob.
(cherry picked from commit 3341ab0776)
Problem: Computed buffer line for mouse position does not take into
account concealed lines on the reached row.
Solution: Adjust for concealed lines at the end of the loop computing
the buffer position.
(cherry picked from commit 2f8fb4f28a)
Problem:
executability check using `uv.fs_access`
doesn't work currently and can't work on windows
Solution:
only check for executable with `vim.fn.executable`
(cherry picked from commit b8763cb215)
Problem:
:Man shows noisy "ENOENT: no such file or directory" error on Windows.
Solution:
Do some checks before calling `vim.system`.
(cherry picked from commit a8dd5c7e41)
Co-authored-by: Emanuel Krollmann <115734183+Sodastream11@users.noreply.github.com>
Problem: Computed previous buffer line count may be beyond end of
buffer. This results in signs being removed from `b_signcols`
that were never included in it, tripping an assertion.
Solution: Store the previous line count as it was before appending or
deleting lines. Use it to clamp the edited region when
clearing signs before a splice, after which it is reset.
(cherry picked from commit 4a706a7092)
Problem: Lines to/from which virt_lines or inline virt_text may have
moved are left valid. Similarly the modified region may be
too small to account for moved decorations after inserting
or deleting lines. `redrawOneLine()` can be replaced with
a call to `changed_lines_redraw_buf()`.
Solution: Invalidate the line after a change if there is virt_lines, or
inline virt_text in the buffer with 'wrap' enabled. Extend the
modified region for inserted or deleted lines if there may be
decorations in the buffer. Remove `redrawOneLine()`.
Simplify the logic for `changed_lines_invalidate_win()`.
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
(cherry picked from commit 064ff74cdb)
Problem: vim.lsp.buf.hover allows a bold border size which hasn't been
defined
Solution: Define the bold border size for vim.lsp.buf.hover
(cherry picked from commit f068386c9f)
Problem:
Normally, `:drop +41 foo.txt` will open foo.txt with the cursor on line
41. But if foo.txt is already open, it instead is a no-op, even if the
cursor is on a different line.
Steps to reproduce:
nvim --clean foo.txt
:drop +30 foo.txt
Solution:
Handle +cmd in ex_drop().
(cherry picked from commit 3647b821ea)
Problem: Logic computing the new height of the modified area does not
take into account virtual lines attached to a folded line.
Solution: Remove `hasFolding()` branch and let `plines_win_full()` do its job.
(cherry picked from commit 5b1561bb71)
Problem: Help files not detected when 'iskeyword' includes ":".
Solution: Do not use \< and \> in the pattern (zeertzjq).
fixes: vim/vim#17069closes: vim/vim#17071e370141bf4
(cherry picked from commit 8af9f8ab5e)
Problem: An on_win-disabled decoration provider is left disabled for
the on_buf callback during the next redraw (if the provider
does not subscribe to on_end).
Solution: Move re-activation of the provider from after the on_end
callback to before the on_start callback.
(cherry picked from commit ca16b54c86)
Problem:
As `:h kp` says, the default value for keywordprg
should be ':help' on Windows. It is currently
always ':Man'.
Solution:
Add condition to options.lua which sets keywordprg
to ':help' if running on windows.
(cherry picked from commit 3ebde5ea14)
Problem:
nvim_buf_del_extmark error if buffer is destroyed before timer stops
Solution:
check nvim_buf_is_valid.
(cherry picked from commit 28e8190185)
Problem: Successive autocmd verbose messages may be emitted without a kind.
Solution: Always set the kind when preparing to emit a verbose message.
(cherry picked from commit 98f5aa2564)
Problem: completion: in keyword completion Ctrl_P cannot go back after
Ctrl_N
Solution: in find_compl_when_fuzzy() always return first match of array, after Ctrl_P
use compl_shown_match->cp_next instead of compl_first_match.
(glepnir)
closes: vim/vim#170433e50a28a03
Co-authored-by: glepnir <glephunter@gmail.com>
(cherry picked from commit b01921cb55)
Problem: compl_shown_match is updated when starting keyword completion
and does not include fuzzy matching.
Solution: Do not update compl_shown_match when starting keyword
completion, since it is the one already selected by the
keyword completion direction. (glepnir)
closes: vim/vim#17033e4e4d1c381
Co-authored-by: glepnir <glephunter@gmail.com>
(cherry picked from commit 8cf413e450)
Problem: When running functional tests locally, test `syntax/shada.vim works`
fails if the local timezone is not a whole number of hours ahead of UTC.
Solution: Use '!%M' for minute format so that UTC is used in the expected
timestamp instead of the local timezone, just like '%H' for hours.
(cherry picked from commit d9405c7935)
Problem: Currently vim.hl.range only allows one timed highlight.
Creating another one, removes the old one.
Solution: vim.hl.range now returns a timer and a function. The timer
keeps track of how much time is left in the highlight and the function
allows you to clear it, letting the user decide what to do with old
highlights.
(cherry picked from commit eae2d3b145)
Problem: `severity` field is recognized by
`vim.diagnostic.Opts.VirtualLines`, but it is not explicitly
documented.
Solution: document it.
(cherry picked from commit 71e133e5e6)
Problem: Redrawing during a substitute confirm prompt causes the match
highlight to disappear.
Solution: Unset `highlight_match` after the prompt has returned.
Use global highlight definitions in searchhl_spec.lua.
(cherry picked from commit 3af43cffa0)
Problem: When `nvim_set_keymap` tries to overwrite a `<unique>` mapping,
it throws an error even when called in `pcall`.
Solution: src/nvim/mapping.c:buf_do_map no longer calls `semsg`. Its
callers now decide whether to ignore the error, or use
`semsg` (not caught)/`api_set_error` (caught by `pcall`).
(cherry picked from commit ec18ebcb41)
Problem:
If a config name contains "*" it causes rtp discovery of `lsp/` to
consider the `*` as a wildcard and could lead to strange and unintended
behaviour. For example, accessing the `'*'` config from a `lsp/` file
would cause an infinite loop.
Solution:
- Explicitly disallow a config name from containing wildcards, with the
exception of `'*'`.
- When Resolving `'*'` config, skip the rtp step.
(cherry picked from commit 2ee896201c)
Problem: Negative window and grid height with 'winbar'.
Solution: Clamp the height when subtracting the 'winbar' height.
(cherry picked from commit 0e7479bb76)
These occurrences also accept string, which is used like in getline.
Also make the lnum field of vim.fn.sign_placelist.list.item optional, as it can
be omitted like vim.fn.sign_place.dict's.
(cherry picked from commit 4a36f234ac)
Problem: Scrolling up does not adjust `w_topline` for concealed lines
directly above it, resulting in (non-visual) asymmetry when
scrolling up/down.
Solution: Adjust `w_topline` for concealed lines after scrolling up.
(cherry picked from commit 32325a66ca)
Problem: Inline virtual text placed in a decor provider callback
invalidates `w_virtcol`, which must be valid for `win_line()`.
Solution: Call `validate_virtcol()` after "line" decor provider callbacks.
(cherry picked from commit 7e8b7bba21)
Problem: repeated gO in markdown etc. adds extra toc indentation
Solution: don't memoize heading table which gets modified
(cherry picked from commit 28eaec5e15)
Problem:
:terminal shell prompt jump mappings ]]/[[ don't work in visual mode.
Solution:
Also define them for in visual mode.
(cherry picked from commit cb247e06f0)
Co-authored-by: msaher <77233589+msaher@users.noreply.github.com>
Problem:
Nvim needlessly requests inlay_hints even if they are disabled for a given buffer.
Solution:
Add the missing `enabled` check in `on_refresh`.
Rest of the code has this check already so that's the only needed one to fix this.
(cherry picked from commit 49756ebc70)
Problem:
Health status can be much more visually distinct.
Solution:
Use emoji next to each status.
(cherry picked from commit 75fe540500)
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem:
:checkhealth shows a confusing message if user sets
g:loaded_python3_provider=1.
Solution:
- Show a warning if that var is set to 1.
- Update provider modules to default to 0. Any user code that is
checking for 1, is like already broken because these may be set to 2.
(cherry picked from commit b4906577c9)
Co-authored-by: Sathya Pramodh <94102031+sathya-pramodh@users.noreply.github.com>
Problem:
When activated from OS "filetype handling", Nvim cannot handle filenames containing spaces.
Solution:
Quote the filename in the .desktop config.
(cherry picked from commit 6e12ef4a7b)
When setting a keymap with "unique" that already exists the error
message contains the LHS of the keymap with termcodes replaced. In
particular this means that keys like <Tab> show as an actual tab
character, meaning the error message displays as "Mapping already exists
for ", which is hard to debug for users.
Instead, display the original LHS (without any simplification or parsed
termcodes). This rperesents exactly what the user passed to the `lhs`
argument of `nvim_set_keymap`, which makes it easier to find where the
offending keymap is.
(cherry picked from commit 0d73ec5834)
Problem
When calling `:checkhealth vim.lsp` after the user has enabled a language
server with `vim.lsp.enable` that has no configuration a runtime error
is hit because the code expects for a configuration to exist.
Solution:
Check if a configuration was returned before parsing it, if it isn't
returned then warn the user that the server has been enabled but a
configuration was not found.
(cherry picked from commit 5554fcc286)
Problem: #33022 didn't update `min_version` to 3.9, therefore Python 3.7
and 3.8 are still available.
Solution: Update `min_version` to 3.9.
(cherry picked from commit ade58885c4)
Problem: An ext_cmdline block event that should be empty after :<CR>
re-emits the previous cmdline.
Solution: Clear `last_cmdline` even when `new_last_cmdline == NULL`.
(cherry picked from commit 95ab723995)
Problem: Clicking on window separator in statusline crashes Nvim due
to out of bound memory access
Solution: Check if the click location is within clicking range before
applying it.
(cherry picked from commit 18fa61049a)
Problem: fragile setup to get (preferred) keys from key_name_entry
(after v9.1.1179)
Solution: refactor the code further, fix a bug with "pref_name" key
entry introduced in v9.1.1180 (Yee Cheng Chin)
The optimization introduced for using bsearch() with key_name_entry
in vim/vim#16788 was fragile as it required synchronizing a non-obvious index
(e.g. IDX_KEYNAME_SWU) with the array that could be accidentally changed
by any one adding a key to it. Furthermore, the "pref_name" that was
introduced in that change was unnecessary, and in fact introduced a bug,
as we don't always want to use the canonical name.
The bug is triggered when the user triggers auto-complete using a
keycode, such as `:set <Scroll<Tab>`. The bug would end up showing two
copies of `<ScrollWheelUp>` because both entries end up using the
canonical name.
In this change, remove `pref_name`, and simply use a boolean to track
whether an entry is an alt name or not and modify logic to respect that.
Add test to make sure auto-complete works with alt names
closes: vim/vim#169877d8e7df551
In Nvim there is no `enabled` field, so put `is_alt` before `name` to
reduce the size of the struct.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
(cherry picked from commit ae98d0a560)
Problem:
- `:lua vim.env.<Tab>` does not show completion of environment variables
- Meanwhile, `:let $<Tab>` does show completion of environment variables
Solution:
- Fix it
Problem: With ':set splitkeep=screen', cursor did't restore column
correctly when splitting a window on a line longer than the
last line on the screen (after v9.1.0707)
Solution: Restore cursor column in `win_fix_scroll()` since it may be
changed in `getvcol()` after 396fd1ec2956 (phanium).
Example:
```
echo longlonglongling\nshort | vim - -u NONE --cmd 'set
splitkeep=screen' +'norm $' +new +q
```
fixes: vim/vim#16968closes: vim/vim#169717746348c5d
Co-authored-by: phanium <91544758+phanen@users.noreply.github.com>
Problem:
On Windows, since b360c06085, UI may hang on exit. #33019
Solution:
Restore the hack in on_proc_exit, until we can figure out why rpc_close
is not called in the UI client when the server closes the channel.
Problem: tests: test_comments leaves swapfiles around
Solution: use ':bw!' instead of ':close!'
closes: vim/vim#1695535cb03648f
Co-authored-by: Christian Brabandt <cb@256bit.org>
running "make format" from the nix devShell defined at https://github.com/nix-community/neovim-nightly-overlay/
failed with:
```
Install the project...
-- Install configuration: "Release"
CMake Error at cmake_install.cmake:52 (file):
file INSTALL cannot find "/home/teto/neovim/build/usr/bin/uncrustify": No
such file or directory.
```
Turns out the following uncrustify (probably cmake-generated) check:
```
file(RPATH_CHECK
FILE "$ENV{DESTDIR}${CMAKE_INSTALL_PREFIX}/bin/uncrustify"
RPATH "")
```
would remove the executable when RPATH was non-empty.
I dont think it's much of an issue here as it's not an executable
supposed to be installed so seeing paths referenced in rpath getting removed should not be a concern
(which I beleive is the reason for the check).
Problem:
chan_close_on_err() writes to the log file before peforming its actual
work. This could be slightly misleading in terms of log timestamps, or
could delay important work on Windows where file-open/write can be slow.
Solution:
Log after closing the channel, instead of before.
Problem:
`receive_msgpack()` calls `channel_close()` just before calling
`chan_close_on_err()`, even though `chan_close_on_err()` always calls
`channel_close()`.
Solution:
Remove the redunant `channel_close()` in `receive_msgpack()`.
Problem:
Forcing Neovim to use OSC52 for the system clipboard should be simple
and concise, since OSC52 is widely supported (Alacritty, Ghostty,
iTerm2, WezTerm, Kitty, xterm, tmux, etc.) and is the most portable
approach for syncing clipboards across SSH.
Solution:
Support g:clipboard="osc52".
Problem:
`:lua vim.lsp.c<tab>` does not list vim.lsp.completion in the completion
list after 24cea4c7f7.
Solution:
- Always include `vim.lsp._submodule` keys in candidates.
- Fixes `vim.lsp.c<tab>` -> `vim.lsp.completion`.
- Eager-load `vim.lsp.completion` to get its completion.
- Fixes `vim.lsp.completion.g<tab>` -> `vim.lsp.completion.get`.
Problem
Pasting a big string ("streamed paste" with multiple chunks) sets the '[
mark to the edit from the last chunk, instead of the start of the paste.
Solution:
Set the '[ mark where the paste started, not where the last chunk was
inserted.
Note: `startpos == nil` is not equal to `phase == 1` because there may
be some empty chunks pasted which won't arrive here (returned at code
before).
Problem: Error messages that cause a vim.ui_attach() namespace to
detach are not visible in the message history. Decoration
provider and vim.ui_attach error messages are dissimilar.
Solution: Emit vim.ui_attach() errors as an actual message in addition
to logging it. Adjust error message format.
Problem: "shellcmdline" completion doesn't work with input().
Solution: Use set_context_for_wildcard_arg(). Fix indent in nextwild()
(zeertzjq).
There are some other inconsistencies for input() completion (ref vim/vim#948),
but since "shellcmdline" currently doesn't work at all, it makse sense
to at least make it work.
fixes: vim/vim#16932closes: vim/vim#169347a5115ce50
Problem: Message kind logic for emitting an error message is convoluted
and still results in emitting an unfinished message earlier than
wanted.
Solution: Ensure emsg_multiline() always sets the kind wanted by the caller
and doesn't isn't unset to logic for emitting the source message.
Caller is responsible for making sure multiple message chunks are
not emitted as multiple events by setting `msg_ext_skip_flush`...
Problem: `:checkhealth` fail to find the module when `&rtp` have nested
paths.
Solution: find in order all existed `&rtp/lua` path rather than `&rtp`
to ensure prefix exist before trim `&rtp`.
In this case one module can be searched out from two different
`&rtp/lua`, we use the first `&rtp/lua` contain the module (like how
require() works).
## Problem
The pattern used to match indentation is wrong as can be seen in
```lua
-- current pattern doesn't match starting space
print(vim.inspect((" xyz"):match("(^%s+)%S")))
-- nil
-- instead, it matches characters `^ ` in text
print(vim.inspect(("x^ yz"):match("(^%s+)%S")))
-- "^ "
-- indentation could've been matched by, however not required
print(vim.inspect((" xyz"):match("^(%s+)%S")))
-- " "
```
## Solution
We don't even need to modify `base_indent` at every line. If every line's indentation is calculated by the previous line's indentation (which already has starting indentation) added to the starting indentation, we see that indentation is multiplied on every line.
Hence, we only add the starting line indentation to every line.
Problem: Crash with nvim_get_runtime_file during wildcard expansion.
Solution: Ensure recursive gen_expand_wildcards() is allowed when
calling os_breakcheck()
Problem:
On Windows, treesitter query files are not recognized as such when
opened from inside their directory, because the full path returned from
fnamemodify(_, ':p') contains backslashes, while the filetype patterns
expect forward slashes.
Solution:
Normalize the result of fnamemodify(_, ':p') before trying to match it
to filetype patterns.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Reconfiguring a float window applies the global 'winborder'.
Solution:
- Ignore 'winborder' when reconfiguring a float window.
- Still apply 'winborder' when converting a split to a float window.
Problem: Paired mark whose end is in front of its start should not have
its decor removed (as fixed by 72f630f9), but may still need to
have its range redrawn.
Solution: Still call `buf_decor_remove()` but ensure it is not called with
an inverse range when `extmark_del()` is called on an end mark.
Problem:
- The document from `go doc` can be very long, and you can scroll if
using `!` to run shell command in Gvim.
- I realize that I didn't fully mimic behavior of default keywordprg
in Nvim in the last commit.
Solution:
- Use builtin terminal for keywordprg in Gvim
- In Nvim (both TUI and GUI), it should mimic the behavior of Vim
`:term`, `:Man`, and `:help`
closes: vim/vim#1691111ab02c819
Co-authored-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: 'winborder' accepting multiple string values.
Solution: Use the fallback did_set_str_generic() callback instead of
did_set_winborder() which calls opt_strings_flags() with
incorrect last argument.
Problem: Wrong cursor position and '^' mark when leaving Insert mode
just after 'autoindent' and cursor on last char of line.
Solution: Don't move cursor to NUL when it wasn't moved to the left
(zeertzjq).
fixes: vim/vim#15581
related: neovim/neovim#30165neovim/neovim#32943closes: vim/vim#16922a3a7d10bfb
Problem: using wrong length for last inserted string
(Christ van Willegen, after v9.1.1212)
Solution: use the correct length in get_last_insert_save(), make
get_last_insert() return a string_T (John Marriott)
closes: vim/vim#169218ac0f73eb1
N/A patches:
vim-patch:9.1.1129: missing out-of-memory test in buf_write()
vim-patch:9.1.1218: missing out-of-memory check in filepath.c
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem:
There is currently no global option to define the default border style for floating windows. This leads to repetitive code when developers need consistent styling across multiple floating windows.
Solution:
Introduce a global option winborder to specify the default border style for floating windows. When a floating window is created without explicitly specifying a border style, the value of the winborder option will be used. This simplifies configuration and ensures consistency in floating window appearance.
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Virtual text indicating runnable code examples in help files is
intrusive and non-configurable (and often denotes actually non-working
examples).
Solution: Remove virtual text.
Problem:
after https://github.com/neovim/neovim/pull/32719, `gf` error in lua:
```
E15: Invalid expression: "v:lua.require"vim._ftplugin.lua".includeexpr()"
E447: Can't find file "vim._ftplugin.lua" in path
```
Solution:
* use single quote (no idea why there's two pair double quote in
expression).
* add missing `v:fname`.
Problem: Unpaired marks are shown with `filter.extmarks == true`, which
should only return visible highlights. Misleading `end_col`
included in `inspect_pos()` for unpaired mark; it is set to
`start_col + 1` which would be a visible highlight, which it is
not. Custom "is_here" filter used to get extmarks overlapping a
position.
Solution: Exclude unpaired highlight extmarks with `filter.extmarks == true`.
Set `end_col` to `start_col` for an unpaired mark. Supply
appropriate arguments to nvim_buf_get_extmarks() to return
overlapping extmarks; exclude marks whose end is at `{row, col}`
with `filter.extmarks == true`.
Problem:
Current `'includeexpr'` in runtime/ftplugin/lua.vim doesn't work with Nvim Lua.
Solution:
Provide an improved 'includeexpr' for Lua in "ftplugin/lua.lua".
Closes: https://github.com/neovim/neovim/issues/32490
Problem: Pasting the '.' register multiple times may work incorrectly
when the last insert starts with Ctrl-D and ends with '0'.
(after 9.1.1212)
Solution: Restore the missing assignment (zeertzjq).
closes: vim/vim#1690861b3544424
Problem: too many strlen() calls in edit.c
Solution: refactor edit.c and remove strlen() calls
(John Marriott)
This commit attempts to make edit.c more efficient by:
- in truncate_spaces() pass in the length of the string.
- return a string_T from get_last_insert(), so that the length of the
string is available to the caller.
- refactor stuff_insert():
- replace calls to stuffReadbuff() (which calls STRLEN() on it's
string argument) with stuffReadbuffLen() (which gets the length of
it's string argument passed in).
- replace call to vim_strrchr() which searches from the start of the
string with a loop which searches from end of the string to find the
last ESC character.
- change get_last_insert_save() to call get_last_insert() to get the
last_insert string (the logic is in one place).
closes: vim/vim#1686334954972c2
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: Since 3cb1e825, all windows with 'statuscolumn' set, and a
resized 'signcolumn' for a particular buffer are marked
to be fully redrawn when the first window is encountered.
The "resized" variable is only unset after all windows have
been drawn, so this results in windows that have just been
draw to be marked for redraw again, even though the
signcolumn did not change size again.
Solution: Replace the `resized` variable with a `last_max` variable that
is changed when the first window into buf is encountered.
The "end" termcode is not actually needed for our purposes. And the
suggested $PS1 has trouble with bash's "reverse find" (CTRL-r) feature,
probably because I did it wrong...
* build(contrib): add zsh completion
this is not part of the build system yet, so packager managers are
supposed to install the file by themselves.
bash doesn't seem to provide shell completion, zsh embeds its own
completion that is bundled with vim's.
Instead of copying zsh's completion, this generated one via
https://github.com/RobSis/zsh-completion-generator
---------
Co-authored-by: Eisuke Kawashima <e.kawaschima+github@gmail.com>
Problem: `trigger` is a custom word not yet used in APIs.
Solution: Use `get` instead because the main effect is that the
completion candidates will be collected (and shown by default,
but follow-up commits are planned to add an `on_result` callback
that allows more general handling).
---------
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
Problem: :checkhealth fails if plugin has nested "lua/" directory
Solution: trim `{runtimepath}/lua` from fullpath to get subpath
(`./**/{health, health/init.lua}`)
Problem:
The `lua/` tests dir is for Lua stdlib tests. It is not for anything
that randomly happens to be implemented with Lua.
Solution:
Move `lua/runtime_spec.lua` to `editor/runtime_spec.lua`.
Problem: Marks that go beyond the end of the buffer, and paired marks
whose end is in front of its start mark are added to and
removed from the decor. This results in incorrect tracking
of the signcolumn.
Solution: Ensure such marks are not added to and removed from the decor.
Problem:
- Many other ftplugin have defined 'omnifunc', but the Lua one doesn't
define one, even though there is `vim.lua_omnifunc()`
- Users may want "stupid" completion to fix Lua config with
`nvim --clean` in case they breaks it
- Nvim doesn't port Lua foldexpr from Vim
Solution:
- Set 'omnifunc' to 'v:lua.vim.lua_omnifunc' in ftplugin/lua.lua
- Set 'foldexpr' to use treesitter
Problem:
`feed_command()` was added as a "bridge" for old test code. 99% of those
cases should be using `n.command()`, which raises errors instead of
silently continuing the test.
Solution:
Deprecate `feed_command()`. It should not be used in new tests.
All usages of `feed_command()` should be converted to `command()` or
`feed()`.
Problem: Virtual 'statuscolumn' lines are evaluated with a misleading v:(rel)num.
Namely set to the line above for `virt_lines_above = true` lines, or even
the last drawn line for a partial redraw.
Solution: Set `v:lnum` for the first evaluated row of a line, first above
virtual line of a row and first non-virtual line of a row.
Problem: Augroup to close lsp preview hover window is not cleared after
the window is closed because of unmatched group name.
Solution: Delete the augroup before closing the preview window with
correct group name.
Problem: No block events emitted with ext_cmdline for :if, :while, :try etc.
Solution: Emit cmdline block events; store the indent level of the
previous cmdline and whether a block event was emitted.
Problem: tests: test_filetype fails when a file is a directory
(Eisuke Kawashima)
Solution: When encountering a directory instead of a file, skip that
particular filetype test
fixes: vim/vim#1689463a885b650
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: completion: preinserted text not removed when closing pum
Solution: delete preinsert text inside in ins_compl_stop() (glepnir).
closes: vim/vim#1689184a7503e29
Problem: MS-Windows: crash when passing long string to expand() with
'wildignorecase'.
Solution: Use the same buflen as unix_expandpath() in dos_expandpath().
Remove an unnecessary STRLEN() while at it (zeertzjq).
closes: vim/vim#1689600a749bd90
Problem: matchparen keeps cursor on case label in sh filetype
(@categorical, after 9.1.1187).
Solution: Use :defer so that cursor is always restored, remove checks
for older Vims, finish early if Vim does not support :defer
fixes: vim/vim#16887closes: vim/vim#1688847071c6076
Problem: Buffer overflow when expanding long file name.
Solution: Use a larger buffer and avoid overflowing it. (Yee Cheng Chin,
closesvim/vim#12201)
a77670726e
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem:
Test may fail because it matches a Lua table address, and the following
whitespace may differ depending on the stringified address length:
test/functional/lua/loop_spec.lua:233: Row 3 did not match.
Expected:
|{3: }|
|{9:Error executing callback:} |
|*{9:uv_idle_t: 0x{MATCH:%w+}} |
|{6:Press ENTER or type command to continue}^ |
Actual:
|{3: }|
|{9:Error executing callback:} |
|*{9:uv_idle_t: 0xd4c2820a00} |
|{6:Press ENTER or type command to continue}^ |
Solution:
Match a variable amount of whitespace.
Problem:
Given that `vim.snippet.expand()` sets temporary `<tab>`/`<s-tab>`
keymaps there is no way to build "smart-tab" functionality where `<tab>`
chooses the next completion candidate if the popup menu is visible.
Solution:
Set the keymap permanent in `_defaults`.
The downside of this approach is that users of multiple snippet engine's
need to adapt their keymaps to handle all their engines that are in use.
For example:
vim.keymap.set({ 'i', 's' }, "<Tab>", function()
if foreign_snippet.active() then
return "<Cmd>lua require('foreign_snippet').jump()<CR>"
elseif vim.snippet.active({ direction = 1 }) then
return "<Cmd>lua vim.snippet.jump(1)<CR>"
else
return key
end
end, { expr = true })
Upside is that using `vim.keymap.set` to override keymaps is a well
established pattern and `vim.snippet.expand` calls made by nvim itself
or plugins have working keymaps out of the box.
Co-authored-by: Maria José Solano <majosolano99@gmail.com>
Problem: Cmdline pum not cleared for input() completion.
Solution: Temporary reset RedrawingDisabled in cmdline_pum_cleanup(),
like what is done in wildmenu_cleanup() (zeertzjq).
fixes: vim/vim#16874closes: vim/vim#168761830e787f6
No code change is needed in Nvim, as RedrawingDisabled does not prevent
the compositor from removing a grid.
Problem: Various list commands end in a newline to go to a new line on
the message grid for the prompt message, which is unwanted
with ext_messages.
Solution: Don't emit a trailing newline with ext_messages for
inputlist(), :tselect and z=.
Co-authored-by: Tomasz N <przepompownia@users.noreply.github.com>
Problem: yi' don't highlight last character since
8ce504820a.
Solution: Always use `opts.inclusive=true`, since calculation of `"]`
(`b_op_end`) have taken `inclusive` into account.
Problem: inside try-block: fn body executed when default arg is
undefined
Solution: When inside a try-block do not execute function body after an
error in evaluating a default argument expression
(Shane Harper).
closes: vim/vim#168652d18789aa6
Co-authored-by: Shane Harper <shane@shaneharper.net>
"umask" is pronounce like "youmask", so having an "an" before it is a
bit strange. In other places in the help, "umask" is not preceded by
either "a" or "an", and sometimes preceded by "the".
Also, "Note" is usually followed either by ":" or "that" in builtin.txt,
so add a ":" after "Note".
closes: 16860
c1c3b5d6a0
Problem:
Nvim tries to use OSC 52 even when no TUIs are attached.
Solution:
On each UIEnter/UILeave event, check that there is a TUI client connected to Nvim's stdout.
Problem:
On Windows, the first attempt at finishing up after a terminal process
terminates is delayed by 200ms, even if it would be possible to finish
up immediately.
Solution:
Make the first attempt at finishing up immediately after the process
terminates.
This matches the `iter_captures` functionality to the `iter_matches`
functionality, allowing it to specify a match limit and start depth for
the query iterator.
When a UI detaches it will execute any UILeave events. Autocommands
cannot run in a libuv handler because they will in turn poll the event
loop, which results in recursive loop execution. So we schedule the
callback to detach the UI on the main event queue.
We also have to schedule the exit when the RPC channel is closed to
ensure it does not run until after `remote_ui_disconnect` has run,
otherwise it will hang.
Problem: Cannot disable individual captures and patterns in treesitter queries.
Solution:
* Expose the corresponding tree-sitter API functions for `TSQuery` object.
* Add documentation for `TSQuery`.
* Return the pattern ID from `get_captures_at_pos()` (and hence `:Inspect!`).
Enable translations in the GCC release job, as it's the fastest.
Although there aren't many tests for translation behavior, this still
allows ensuring that Nvim isn't broken when translations are enabled.
Problem: The current implementation creates a unique autocommand group for each floating preview window, which is inefficient and can lead to numerous autocommand groups.
Solution: Use a single shared autocommand group with improved window validation to properly clean up LSP floating preview windows.
Problem: Unnecessary use of STRCAT() in au_event_disable(). STRCAT()
seeks to the end of new_ei, but here the end is already known.
Solution: Use STRCPY() and add p_ei_len to new_ei. Also fix a typo in a
comment. Add a test that 'eventignore' works in :argdo
(zeertzjq).
closes: vim/vim#16844969e11a18b
Cherry-pick p_ei_len from patch 9.1.0256.
The name of Cmdwin* events were changed to CmdWin* in 8ed2dbf6e2
without explanation. This commit changes them back.
This doesn't affect the creation or execution of autocommands. It only
affects the listing of autocommands.
Problem: filetype: false positive help filetype detection
Solution: Only detect a file as help if modeline appears either at start
of line or is preceded by whitespace (zeertzjq).
closes: vim/vim#168456763b0ee95
Problem: filetype: help files in git repos are not detected
Solution: detect */doc/*.txt files as help if they end with a help
modeline, even if 'modeline' is off
Here's how I checked that this would still detect vim's own help files
correctly:
$ find . -type f -path '*/doc/*.txt' \
> -exec awk '{ } ENDFILE { print FILENAME ":" $0; }' '{}' + |
> grep -v 'vim:.*\<\(ft\|filetype\)=help\>'
./src/libvterm/doc/seqs.txt: 23 DECSM 42 = DECNRCM, national/multinational character
closes: vim/vim#1681716d6fff98e
Split the pattern into a Lua pattern for the first part and a Vim regex
pattern for the second part, so that if the first part doesn't match
there is no need to use the Vim regex.
Co-authored-by: David Mandelberg <david@mandelberg.org>
Problem:
:checkhealth vim.treesitter sorts parser entries solely by path,
splitting duplicates and reducing clarity.
Solution:
Sort entries first by name, then by path, so that duplicates are grouped.
Problem:
The root dir function is not passed any context and can only assume the
current buffer is the one being attached.
The main use case is for getting the path of the buffer using
`nvim_buf_get_name`.
Solution:
Pass the buffer number as the first argument.
Problem:
vim.lsp.completion with "autotrigger" enabled, does not send
completion context, even though it has all the necessary info.
Solution:
Include the context for "autotrigger".
trigger() also optionally accepts context when manually invoked.
Problem:
Running :TOhtml with a file containing modeline may generate an invalid modeline in the output.
Solution:
Add `<!-- vim: set nomodeline: -->` to the output.
Use vi-compatible modeline format ("set foo:"), to avoid the trailing `-->` being treated as part of the modeline.
Problem:
"use_float" in the if-condition causes a new buffer to be generated on every execution.
Solution:
- Remove the incorrect use_float check from the condition.
- Use buf_clear to properly clear the existing buffer.
This actually only affects the order in which Cmdline* and Cmdwin*
autocommands are listed, and it appears that the names of Cmdwin* were
changed to CmdWin* in 8ed2dbf6e2 without
explanation.
Also, remove the final NULL element from the names table.
Problem:
1. The original info text is truncated in pum_set_preview_text.
2. There is an extra newline character at the end of the info text.
3. Incorrect usage of plines_win leads to errors in calculating the window height.
Solution:
1. Improved string handling in pum_preview_set_text to safely process line content without modifying the original text. Now, the preview info is correctly preserved while splitting lines.
2. Do not append a trailing newline to the preview buffer when one is present at the end.
3. Set w_widher_inner in advance; otherwise, plines_win cannot correctly calculate the wrapped line height.
Problem:
"make lintdoc" is not validating vimdoc (:help) tags.
Solution:
- Call `lang_tree:parse()` to init the parser.
- Load netrw 🤢 explicitly, since it was moved to `pack/dist/opt/`.
- Fix invalid help tags.
Problem: It's difficult for colorscheme authors to know which highlight
groups should be defined.
Solution: List and link to all built-in highlight group categories. Also
remove outdated text on "preferred" and "secondary" groups.
This allows generated sources to be automatically rebuilt when modifying
hashy code.
Also, appending to NVIM_GENERATED_FOR_{HEADERS,SOURCES} in the middle of
custom commands is a bit strange. Move that after the custom commands.
Problem: runtime(tera): tera support can be improved
Solution: update tera filetype plugin, include a tera syntax script
update the filetype test, update makemenu and synmenu vim scripts
(MuntasirSZN)
closes: vim/vim#16830vim/vim@14da0fb
Problem: matchparen plugin wrong highlights shell case statement
(Swudu Susuwu)
Solution: return early, if we are in a shSnglCase syntax element
The shell syntax element "case $var in foobar)" uses closing parenthesis
but there is no corresponding opening parenthesis for that syntax
element. However matchparen is not aware of such things and will happily
try to match just the next opening parenthesis.
So let's just add a way to opt out for such cases. In this case, use the
syntax state to check if the closing parenthesis belongs to the syntax
item "shSnglCase" and if it is, do not try to find a corresponding
opening parenthesis.
Since inspecting the syntax state might be expensive, put the whole
check behind a filetype test, so that matchparen will only perform this
particular check, when it knows the current buffer is a "sh" filetype.
fixes: vim/vim#16801closes: vim/vim#168319102ac11ab
Co-authored-by: Christian Brabandt <cb@256bit.org>
Follow-up to #32768
This is slightly faster according to the benchmark.
This also makes it a build error if hashy is used incorrectly
(generating a case-insensitive hash function from mixed-case strings),
as duplicate case labels aren't allowed.
Problem: Unnecessary use of vim_tolower() in vim_strnicmp_asc().
Solution: Use TOLOWER_ASC() instead (zeertzjq).
It was passing *s1 and *s2 to vim_tolower(). When char is signed, which
is the case on most platforms, c < 0x80 is always true, so it already
behaves the same as TOLOWER_ASC().
closes: vim/vim#16826b7dc5d3b61
Use this function for hashy case-insensitive lookup, as it's ASCII-only.
Note that this function doesn't cast TOLOWER_ASC() argument to uint8_t,
so it'll treat a UTF-8 byte as smaller than NUL. It doesn't matter, as
one of the strings being compared is ASCII-only, and its behavior still
leads to consistent ordering.
It's no longer needed after #32152.
I'll not apply this change to Vim first, because Nvim's event name
aliases are a bit different from Vim.
After this change there is a small speedup in nvim_exec_autocmds as per
test/benchmark/autocmd_spec.lua.
Always allow the following four events to be nested, as they may contain
important information, and are triggered on the event loop, which may be
processed by a blocking call inside another autocommand.
- ChanInfo
- ChanOpen
- TermRequest
- TermResponse
There are some other events that are triggered on the event loop, but
they are mostly triggered by user actions in a UI client, and therefore
not very likely to happen during another autocommand, so leave them
unchanged for now.
- Allow trailing backslashes in option values.
- Match :map-special modifier.
- Match :map-arguments case-sensitively.
- Remove <*Leader> from map modifier list and allow in RHS of a mapping.
closes: vim/vim#168226bdfeb099a
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: too many strlen() calls in misc2.c
Solution: refactor misc2.c and use bsearch() instead of a linear search
to find matches in the key_names_table array (John Marriott).
This commit changes misc2.c to use bsearch() to perform string searches of
the key_names_table array.
Implementation detail:
- Some entries in this array have alternate names. Add field alt_name to
point to the alternate name.
- Some entries in this array are only available if a given feature is
defined. Keep them in the array, but add a boolean field enabled to
indicate if the record can be used or not. If the feature is not
available, the corresponding enabled field is set to FALSE.
In my measurements running the test suite on a huge non-gui build on
linux, the number of string comparisons in get_special_key_code():
Before (linear search): 2,214,957
After (binary search): 297,770
A side effect of this is 1477 calls to STRLEN() in
get_special_key_name() for the same test run are no longer necessary.
closes: vim/vim#167884a1e6dacbb
Skip the mouse shape changes.
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem:
When a function like vim.wait() is used, we continuously drain the main
event queue until it is empty, never stopping for user input. This means
the libuv timer never runs and the terminal never gets refreshed, so
emit_termrequest continously reschedules itself onto the same event
queue, causing an infinite loop.
Solution:
Use a separate "pending" event queue, where events that require a
terminal refresh are temporarily placed. Drain this queue after a
terminal refresh and events are copied back onto the main queue. This
prevents infinite loops since the main event queue will always be able
to properly drain.
Problem: Skipping over a concealed line for which `win_line()`
_should_ be called because it has `virt_lines_above = false`
lines associated with it.
Solution: Don't include such a line in `wl_lastlnum` from the line
above.
Problem: terminal mode cursor refresh logic has too many edge cases where it
fails when events change curbuf.
Solution: change the logic. Introduce cursor_visible to TerminalState to more
reliably track if terminal mode has changed busy. Move visibility handling to
refresh_cursor and move its call in refresh_terminal to terminal_check to avoid
temporarily changed curbufs from influencing cursor state.
This has the effect of "debouncing" shape/visibility updates to once per
terminal state tick (with the final attributes taking effect, as expected). I
think this is OK, but as a result it may also be warranted to update when
redrawing during the same state tick (e.g: from events executing :redraw); this
can be added later, if wanted.
Also move previous tests to a more appropriate place.
Problem: tests: when the file 'TestCommand?Test' exists,
'Test_complete_cmdline()' will fail when writing the file. And
there's no related cleaning operation for this kind of file
before the test run.
Solution: modify `write` to `write!` to override (Jim Zhou).
closes: vim/vim#16799f7087cbec7
Co-authored-by: Jim Zhou <jimzhouzzy@gmail.com>
Problem: heap-buffer-overflow with 'nostartofline' and Ex command in
tag file.
Solution: Set cursor column when moving cursor to line 1 (zeertzjq).
closes: vim/vim#167963ed6659549
When a plugin registers a TermRequest handler there is currently no way
for the handler to know where the terminal's cursor position was when
the sequence was received. This is often useful information, e.g. for
OSC 133 sequences which are used to annotate shell prompts.
Modify the event data for the TermRequest autocommand to be a table
instead of just a string. The "sequence" field of the table contains the
sequence string and the "cursor" field contains the cursor
position when the sequence was received.
To maintain consistency between TermRequest and TermResponse (and to
future proof the latter), TermResponse's event data is also updated to
be a table with a "sequence" field.
BREAKING CHANGE: event data for TermRequest and TermResponse is now a
table
Problem: wildmenu highlighting in popup can be improved
Solution: Check if the completion items contain submatches of the
entered text (Girish Palya).
This update enables highlighting in the popup menu even when the matched
fragment or pattern appears within an item (string) rather than only at the
beginning. This is especially useful for custom completion, where menu items
may not always start with the typed pattern.
For specific use cases, refer to the two examples in
https://github.com/vim/vim/pull/16759
A sliding window approach is used with direct string comparison. Performance
is not a concern, as highlighting is applied only to displayed lines, even if
the menu list is arbitrarily long.
closes: vim/vim#167854ec46f3210
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: Last line in a window does not store correct `wl_lastlnum` if
lines below it are concealed (resulting in e.g. incorrect
cursor row).
Solution: Increment `wl_lastlnum` while it points to a line above a
concealed line.
Problem: After 47aaddfa the max_height option is no longer respected.
Hover documentation and Signature help windows take up the
entire text height.
Solution: Compare to window's current height and only modify the height
if it would reduce the height, not enlarge it.
When multiple diagnostics appear on a single line, the virtual lines for
all diagnostics except the first were rendered with progressively fewer
columns.
Problem: using global variable for get_insert()/get_lambda_name()
(after v9.1.1151)
Solution: let the functions return a string_T object instead
(Yee Cheng Chin)
In vim/vim#16720, `get_insert()` was modified to store a string length in a
global variable to be queried immediately by another `get_insert_len()`
function, which is somewhat fragile. Instead, just have the function
itself return a `string_T` object instead. Also do the same for
`get_lambda_name()` which has similar issues.
closes: vim/vim#167750b5fe42071
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: mark '] wrong after copying text object (ubaldot)
Solution: Adjust position of '] for non-linewise, exclusive motions
(Jim Zhou)
related: vim/vim#16679closes: vim/vim#16772360a39ae6c
Co-authored-by: Jim Zhou <jimzhouzzy@gmail.com>
Problem: wrong flags passed down to nextwild()
(zeertzjq, after v9.1.1166)
Solution: only pass options flags (Girish Palya)
`options` needs to be passed into nextwild() since it may contain
WILD_KEEP_SOLE_ITEM which prevents the menu items list from getting
freed if there is only 1 item left (if `noselect` is set).
closes: vim/vim#16778d2219d547d
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: command-line auto-completion hard with wildmenu
Solution: implement "noselect" wildoption value (Girish Palya)
When `noselect` is present in `wildmode` and 'wildmenu' is enabled, the
completion menu appears without pre-selecting the first item.
This change makes it easier to implement command-line auto-completion,
where the menu dynamically appears as characters are typed, and `<Tab>`
can be used to manually select an item. This can be achieved by
leveraging the `CmdlineChanged` event to insert `wildchar(m)`,
triggering completion menu.
Without this change, auto-completion using the 'wildmenu' mechanism is
not feasible, as it automatically inserts the first match, preventing
dynamic selection.
The following Vimscript snippet demonstrates how to configure
auto-completion using `noselect`:
```vim
vim9script
set wim=noselect:lastused,full wop=pum wcm=<C-@> wmnu
autocmd CmdlineChanged : timer_start(0, function(CmdComplete, [getcmdline()]))
def CmdComplete(cur_cmdline: string, timer: number)
var [cmdline, curpos] = [getcmdline(), getcmdpos()]
if cur_cmdline ==# cmdline # Avoid completing each character in keymaps and pasted text
&& !pumvisible() && curpos == cmdline->len() + 1
if cmdline[curpos - 2] =~ '[\w*/:]' # Reduce noise by completing only selected characters
feedkeys("\<C-@>", "ti")
set eventignore+=CmdlineChanged # Suppress redundant completion attempts
timer_start(0, (_) => {
getcmdline()->substitute('\%x00$', '', '')->setcmdline() # Remove <C-@> if no completion items exist
set eventignore-=CmdlineChanged
})
endif
endif
enddef
```
fixes: vim/vim#16551closes: vim/vim#167592bacc3e5fb
Cherry-pick Wildmode_Tests() change from patch 9.0.0418.
Co-authored-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Tomas Slusny <slusnucky@gmail.com>
Problem: Cannot use "g<" mapping with ext_messages. Mapping displays
the scrollback buffer since the last command, but the
scrollback buffer is not populated with ext_messages.
Solution: With ext_messages; store messages in the history that otherwise
wouldn't be. Mark them as temporary messages to be deleted when
the scrollback buffer would be cleared. To this end, make the
message history a doubly-linked list such that messages can be
removed from an arbitrary position.
Outlook: Default ext_messages UI might not show the hit-enter prompt
so we want "g<" to work as a recommended way to show messages
for the last command (prompted by an indicator).
Problem: Vim's diff block merging algorithm when doing a multi-file diff
is buggy when two different diff hunks overlap a single
existing diff block (after v9.1.0743)
Solution: fix a couple bugs in this logic:
1. Fix regression from v9.1.0743 where it's not correctly expanding the
2nd overlap correctly, where it always expands without taking into
account that this was always taken care of when the first overlap
happened. Instead, we should only grow the 2nd overlap if it overhangs
outside the existing diff block, and if we encounter a new overlapping
diff block (due to overlap chaining).
2. When we expand a diff block to match the hunk size on the orig side
(when handling the first overlap), we expand the same amount of lines
in the new side. This is not sound if there exists a second overlap
hunk that we haven't processed yet, and that hunk has different
number of lines in orig/new. Fix this by doing the corresponding
counter adjustment when handling 2nd/3rd/etc overlap by calculating
the difference in lines between orig and new side.
(Yee Cheng Chin)
closes: vim/vim#16768bc08ceb755
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
**Problem:** Some weird languages have different comment syntax
depending on the location in the code, and we do not have a way to
determine the correct `commentstring` for these special cases.
**Solution:** Allow queries to specify `commentstring` values in
metadata, allowing users/`nvim-treesitter` to provide a better
commenting experience without hugely increasing the scope of the code in
core.
Problem: preinsert requires bot "menu" and "menuone" to be set,
but "menu" is redundant (after v9.1.1160)
Solution: preinsert only requires menuone (glepnir)
closes: vim/vim#1676394a045ed56
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: The 'preinsert' feature requires Ctrl-Y to confirm insertion,
but Ctrl-Y only works when the popup menu (pum) is displayed.
Without enforcing this dependency, it could lead to confusing
behavior or non-functional features.
Solution: Modify ins_compl_has_preinsert() to check for both 'menu' and
'menuone' flags when 'preinsert' is set. Update documentation
to clarify this requirement. This avoids adding complex
conditional behaviors. (glepnir)
fixes: vim/vim#16728closes: vim/vim#16753a2c5559f29
Co-authored-by: glepnir <glephunter@gmail.com>
- Prevent 'include' from matching variable assignments as calls to
require() and others.
- Use script-local functions for 'includeexpr' and 'foldexpr'.
- Formatting fixes.
closes: vim/vim#167460b8205484b
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem:
- The doc says the default `g:lua_subversion` is 2, but in fact it is 3
(see `runtime/syntax/lua.vim`)
- `includeexpr` doesn't work with module in `init.lua`
Solution:
- Update documentation
- Assign value to option `&include`
- Add function `LuaInclude` and assign it to `l:&includeexpr`
closes: vim/vim#1665500a00f5d3f
Co-authored-by: brianhuster <phambinhanctb2004@gmail.com>
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: No way to check the version of a treesitter parser.
Solution: Add version metadata (ABI 15 parsers only) as well as parser state count and supertype information (ABI 15) in `vim.treesitter.language.inspect()`. Also graduate the `abi_version` field, as this is now the official upstream name.
---------
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
Problem: _on_conceal_line callbacks are not invoked if callback has not
let Nvim know it wants to receive them. But this may change on
factors other than what is currently checked (changed buffer).
Solution: Forego this optimization, callback is still guarded behind
'conceallevel'.
Problem: ":so" command may read after end of buffer.
Solution: Compute length of text properly.
4748c4bd64
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Sourcing buffer lines may lead to errors for conflicts.
Solution: Add the ++clear argument. (Yegappan Lakshmanan, closesvim/vim#9991)
35dc17634d
Documentation changes only. Vim9script is N/A.
Cherry-pick another documentation change for :source from latest Vim.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Sourcing buffer lines is too complicated.
Solution: Simplify the code. Make it possible to source Vim9 script lines.
(Yegappan Lakshmanan, closesvim/vim#9974)
85b43c6cb7
This commit changes the behavior of sourcing buffer lines to always have
a script ID, although sourcing the same buffer always produces the same
script ID.
vim-patch:9.1.0372: Calling CLEAR_FIELD() on the same struct twice
Problem: Calling CLEAR_FIELD() on the same struct twice.
Solution: Remove the second CLEAR_FIELD(). Move the assignment of
cookie.sourceing_lnum (zeertzjq).
closes: vim/vim#14627f68517c167
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Need to write script to a file to be able to source them.
Solution: Make ":source" use lines from the current buffer. (Yegappan
Lakshmanan et al., closesvim/vim#9967)
36a5b6867b
Most code and test changes are reverted or modified again in patch
8.2.4603, so only port parts that are untouched in patch 8.2.4603.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Mode message not cleared after :silent message
(after 9.0.1634).
Solution: Don't reset mode_displayed when the message is empty.
(zeertzjq)
fixes: neovim/neovim#32641closes: vim/vim#16744fce1fa5b61
Problem: Wrong script context for option set by function defined by
nvim_exec2 in a Lua script.
Solution: Call nlua_set_sctx() after adding SOURCING_LNUM and always set
sc_lnum for a Lua script.
This is a bug discovered when testing #28486. Not sure if this actually
happens in practice, but it's easy to fix and required for #28486.
Problem:
popup floating window is closed and recreated for each item selection,
this is a bit wasteful.
Solution:
- Hide the preview win (instead of closing it) when the menu is still displayed:
1. When selected_item is -1.
2. When switching from an item with an "info" field to one without.
- When pum is undisplayed it is still closed.
Problem:
Descriptions are somewhat vague. nvim_set_current_line modifies contents
but nvim_set_current_buf does not, etc.
Solution:
- Make it clear that these functions accept or return a winid/tabid by
linking to that concept in help.
- Only these few files use the term "handles", so replace them with the
more conventional terminology.
- Add a new help section for tab-ID. This concept is unique to neovim
because vim exposes tabnr, but not tab handles. This section is
modelled after `:h winid`.
Problem: f58e7d5f passed `&botline` to `plines_win_full()`, (probably)
assuming it would be set to the first line of the fold.
Solution: Reinstate call to `hasFolding()` to do so.
Problem: too many strlen() calls in getchar.c
Solution: store last inserted and recorded lengths,
add functions to retrieve those and use those
functions (John Marriott)
closes: vim/vim#16720d3c4b7e946
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem:
Indenting text is a common task in plugins/scripts for
presentation/formatting, yet vim has no way of doing it (especially
"dedent", and especially non-buffer text).
Solution:
Introduce `vim.text.indent()`. It sets the *exact* indentation because
that's a more difficult (and thus more useful) task than merely
"increasing the current indent" (which is somewhat easy with a `gsub()`
one-liner).
Problem: read/write shada function logic was skipped entirely if it was
detected the shadafile option was set to 'NONE'.
Solution: The filename is now always resolved. When the shadafile option
is set to 'NONE' AND no filename was passed, the filename resolves to an
empty string, which causes the read/write functions to return.
Regardless of whether the option is set to 'NONE', when a filename is
explicitly passed, it gets resolved and the read/write logic is
accessed.
- Move all generator Lua scripts to the `src/gen/`
- Add a `.luarc.json` to `src/gen/`
- Add a `preload.lua` to `src/gen/`
- Add `src` to `package.path` so it aligns with `.luarc.json'
- Fix all `require` statements in `src/gen/` so they are consistent:
- `require('scripts.foo')` -> `require('gen.foo')`
- `require('src.nvim.options')` -> `require('nvim.options')`
- `require('api.dispatch_deprecated')` -> `require('nvim.api.dispatch_deprecated')`
Problem:
Generated Lua API bindings may have trailing spaces (e.g. nvim_set_hl).
Solution:
Add leading spaces only if arg_free_code is non-empty.
Also:
- Remove an unnecessary string.format() in write_shifted_output() args.
- Fix incorrect indent for the nlua_push_keydict() below.
A binary format spec always expects a corresponding unsigned long long
value. However, that explicit handling didn't get included when porting
the code from Vim, so binary format spec was falling through to the
"unsigned" and "length_modifier = NUL" portion of the code:
} else {
// unsigned
switch (length_modifier) {
case NUL:
uarg = (tvs
? (unsigned)tv_nr(tvs, &arg_idx)
: (skip_to_arg(ap_types, ap_start, &ap, &arg_idx,
&arg_cur, fmt),
va_arg(ap, unsigned)));
break;
This incorrectly read an "unsigned" value from an "unsigned long long"
variable, which would produce incorrect results on certain platforms.
Problem: When setting an option, mapping etc. from Lua without -V1, the
script ID is set to SID_LUA even if there already is a script
ID assigned by :source.
Solution: Don't set script ID to SID_LUA if it is already a Lua script.
Also add _editor.lua to ignorelist to make script context more
useful when using vim.cmd().
Problem: Height of a (markdown) `vim.lsp.util.open_floating_preview()`
window can be reduced to account for concealed lines (after #31324).
Solution: Set the window height to the text height of the preview window.
Set 'concealcursor' to avoid unconcealing the cursorline when
entering the hover window.
TSHighlighter now places marks for conceal_lines metadata. A new
internal decor provider callback _on_conceal_line was added that
instructs the highlighter to place conceal_lines marks whenever the
editor needs to know whether a line is concealed. The bundled markdown
queries use conceal_lines metadata to conceal code block fence lines.
Problem: When expanding omni completion items with newlines (e.g.
`then\n\t\nend`), the end statement gets wrong indentation.
Solution: Add OPENLINE_FORCE_INDENT flag to make open_line() use
second_line_indent directly (glepnir)
closes: vim/vim#166145090a1fecb
Problem: When calling an API from Vimscript to set an option, mapping,
etc., :verbose shows that it's set from an API client.
Solution: Don't override current_sctx.sc_sid when calling an API from
Vimscript. Also fix the inverse case where API channel id is
not set when calling an API from RPC. Move channel id into
sctx_T to make saving and restoring easier.
Related #8329
Problem:
luv callback `vim.uv.new_timer():start(0, 0, function() error() end)`
causes SIGSEGV, since `xstrdup` gets NULL from `lua_tostring`.
Similar to: a5b1b83a26
Solution:
Check NULL before `xstrdup`.
Problem: illegal memory access when putting a register
Solution: make sure cursor column doesn't become negative
e0029daa35
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: there is no way to distinguish between user's explicit
completion stop/cancel and other automated reasons.
Solution: update "cancel" reason to be set only on explicit CTRL-e, and
set intentionally vague "discard" otherwise.
Problem: setting title and/or footer without explicitly setting border
shows "title/footer/ requires border to be set" error.
At the same time, explicitly setting `border = "none"` (which is
default) shows expected no-border-no-title-no-footer window without
error.
Solution: allow setting title/footer without explicitly setting border.
Lua coroutines can yield across non-coroutine function boundaries,
meaning that we don't need to wrap each helper function in a coroutine
and resume it within `_parse()`. If we just have them yield when
appropriate, this will be caught by the top level `_parse()` coroutine,
and resuming the `_parse()` will resume from the position in the helper
function where we yielded last.
Problem:
- Many other ftplugin have defined 'omnifunc', but the Lua one doesn't
define one, even though there is `vim.lua_omnifunc()`
- Users may want "stupid" completion to fix Lua config with
`nvim --clean` in case they breaks it
Solution:
Set 'omnifunc' to 'v:lua.vim.lua_omnifunc' in ftplugin/lua.lua
Problem: [fifo] is not displayed when editing a fifo
(after v7.4.2189)
Solution: stat the filename and detect the type correctly
fixes: vim/vim#16702closes: vim/vim#16705f1c3134ee1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: ins_str() is inefficient by calling STRLLEN()
Solution: refactor ins_str() to take a length argument
and let all callers provide the correct length
when calling ins_str() (John Marriott)
closes: vim/vim#16711f4b36417e8
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: Match highlighting marks a buffer region to be redrawn as if
its buffer text was changed, unnecessarily invoking syntax code.
Solution: Set the `w_redraw_top/bot` variables instead of the b_mod_* ones
(Luuk van Baal)
7bbb0f357e
Same idea as a7be4b7bf8, but that only showed the context if the
length of the string differed. Since these tests check both string
length and string content, the ctx should be provided for both.
ERROR test/unit/testutil.lua @ 797: vim_snprintf() positional arguments
test/unit/testutil.lua:769: test/unit/testutil.lua:753: (string) '
test/unit/strings_spec.lua:159: snprintf(buf, 4, "%1$0.*2$b", 12ULL, cdata<int>: 0xf78c8ed8) = 001100
Expected objects to be the same.
Passed in:
(string) '000'
Expected:
(string) '001''
Problem: It's difficult to navigate large structured text files (vim
help, checkhealth, Markdown).
Solution: Support `gO` for table of contents and `]]`/`[[` for moving
between headings for all these filetypes using treesitter queries.
Refactor: colorization of highlight groups is moved to the `help` ftplugin
while headings-related functionality is implemented in a private
`vim.treesitter` module for possible future use for other filetypes.
Problem:
After https://github.com/neovim/neovim/pull/32377 selecting snippets
provided by luals inserted the multi-line text before accepting the
candidates. That's inconsistent with servers who provide `textEdit`
instead of `insertText` and having lines shift up/down while cycling
through the completion candidates is a bit irritating.
Solution:
Use the logic used for `textEdit` snippets also for `insertText`
Problem: On 32-bit architectures, musl libc makes heavy use of
__typeof__ as part of its __REDIR macro for optional backwards
compatibility with 32-bit time_t values. Unfortunately, the
__typeof__ keyword is not supported by the LuaJIT C parser.
Solution: Filter out the keyword in filter_complex_blocks.
Problem: potential out-of-memory issue in search.c
Solution: improve situation and refactor search.c slightly
(John Marriott)
- In function update_search_stat():
add a check for a theoretical null pointer reference, set and remember
the length of lastpat, remove the three calls to STRLEN() and use the
various string's associated lengths instead, add a check for an
out-of-memory condition.
- In function search_for_fuzz_match():
remove a call to strnsave() and thus avoid having to add a check for
an out-of-memory condition, also replace the call to STRLEN() by
ml_get_buf_len().
closes: vim/vim#16689b79fa3d9c8
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: 'listchars' "precedes" is not drawn on Tabs.
Solution: Only draw 'listchars' "precedes" when not skipping over cells.
(zeertzjq)
fixes: vim/vim#5927closes: vim/vim#1669113f100e932
**Problem:** Currently, parsing is asynchronous, but it involves a
(sometimes lengthy) step which finds all injection ranges for a tree by
iterating over that language's injection queries. This causes edits in
large files to be extremely slow, and also causes a long stutter during
the initial parse of a large file.
**Solution:** Break up the injection query iteration over multiple event
loop iterations.
The new native commenting functionality is currently not used when
editing mail. One could reasonably expect it to change the "quote" state
of any given line in the mail (i.e. the preceding ">"), which would be
very handy and feel natural when editing mail. Especially since the
current file already uses "setlocal comments+=n:>".
Solution: Add commentstring to `> %s` to be used in files of type mail.
closes: vim/vim#1666927f5136761
Co-authored-by: Lucas Eekhof <105216949+eekhof@users.noreply.github.com>
runtime/syntax/dosini.vim supports both ; and # as comments, and I think
a bunch of the files detected as dosini do too, so add support for # to
the ftplugin.
closes: vim/vim#16681911742a975
Co-authored-by: David Mandelberg <david@mandelberg.org>
Problem: No kind for `:registers/autocmd/augroup` messages. `:registers`
chunks are emitted as separate `msg_show` events.
Solution: Add the `list_cmd` kind to the message. Introduce a new
`msg_ext_skip_flush` variable to set to true around a
group of to be paired message chunks.
Problem: when 'completeopt' is set to preinsert the preinserted text is
not cleared when adding new leader (Yee Cheng Chin)
Solution: add a condition to delete preinsert text in edit function
(glepnir)
closes: vim/vim#1667252fd867f5e
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: cannot loop through pum menu with multiline items with
fuzzy and noselect in 'completeopt' (Tomasz N)
Solution: remove unnecessary compl_no_select condition (glepnir)
fixes: vim/vim#16641closes: vim/vim#166743af0a8d8f5
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: patch 9.1.1121 used a wrong way to handle enter
Solution: compl_enter_selects also needs to consider the selected item
in ins_compl_new_leader() (glepnir)
closes: vim/vim#166734418041698
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Enter does not insert newline with "noselect" when the pum is
visible (lifepillar)
Solution: When Enter is pressed and no complete-item is selected,
ins_compl_prep returns false, and the edit function continues
processing Enter to insert a new line. (glepnir)
fixes: vim/vim#1653closes: vim/vim#1665307f0dbe3aa
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: No test for 'listchars' "precedes" with double-width char.
Solution: Add a test and fix a typo in code (zeertzjq).
closes: vim/vim#1667508a83a033a
Cherry-pick test_listchars.vim changes from patch 9.0.0625.
Fix a regression from #30014 by moving the mb_schar assignment after the
double-width check.
Problem: Messages preceding a `cmdline_show->prompt` event can not be
distinguished as such when receiving the event. (But since
`msg_show` handlers should be scheduled, one can already check
whether a prompt is active when displaying the message.)
Solution: Rather than add a new kind again, use the `confirm` kind.
Could be seen as slightly misleading where it is more of
a choice rather than a confirmation, but that already applies
to `confirm()` as well...
PuTTY sets TERM=xterm, but sends ESC[1~ and ESC[4~ for Home/End keys,
which does not match what the 'xterm' terminfo has for khome/kend, so
libtermkeys instead reports them as the original DEC VT220 names.
The VT220 came with a DEC LK201 keyboard which had the following keys in
the area above arrow keys (where PCs now have Ins/Del/Home/End/etc):
┌────────┬────────┬────────┐
│ Find │ Insert │ Re- │
│ │ Here │ move │
├────────┼────────┼────────┤
│ Select │ Prev │ Next │
│ │ Screen │ Screen │
└────────┴────────┴────────┘
These would send ESC[x~ sequences in the expected order:
┌────────┬────────┬────────┐
│ ESC[1~ │ ESC[2~ │ ESC[3~ │
├────────┼────────┼────────┤
│ ESC[4~ │ ESC[5~ │ ESC[6~ │
└────────┴────────┴────────┘
Modern terminals continue to use the same sequences for Ins/Del as well
as PageUp/PageDn. But the VT220 keyboard apparently had no Home/End, and
PuTTY apparently chose to re-purpose the Find/Select key sequences for
Home/End (even though it claims to emulate Xterm and this doesn't match
what actual Xterm does).
So when Home/End are used in Neovim through PuTTY with TERM=xterm (the
default setting), libtermkey finds no match for the received sequences
in the terminfo database and defaults to reporting them as <Find> and
<Select> respectively.
PuTTY is not unique here -- tmux *also* sends ESC[1~ and ESC[4~ after
its internal translation -- but the difference is that 'tmux' terminfo
correctly maps them to Home/End so Neovim recognizes them as such, while
PuTTY defaults to using 'xterm' which uses a different mapping.
This initial patch only allows Neovim to recognize <Find> and <Select>
key codes as themselves, so that the user could manually map them e.g.
using ":imap <Find> <Home>".
Alternatives:
- Using TERM=putty(-256color) would of course be the most correct
solution, but in practice it leads to other minor issues, e.g. the
need to have different PuTTY config profiles for older or non-Linux
systems that lack that terminfo, or tmux's insistence on rendering
italics as reverse.
- Using Neovim through tmux avoids the problem (as tmux recognizes
ESC[1~ on input), but is something that needs to be manually run
every time.
The keycodes.h constants are slightly misnamed because K_SELECT was
already taken for a different purpose.
**Problem:** An erroneous query in the treesitter highlighter gives a
deluge of errors that makes the editor almost unusable.
**Solution:** Detach the highlighter after an error is detected, so that
it only gets displayed once (per highlighter instance).
Problem: Computing fold levels for an empty buffer (somehow) breaks the
parser state, resulting in a broken highlighter and foldexpr.
Cached foldexpr parser is invalid after filetype has changed.
Solution: Avoid computing fold levels for empty buffer.
Clear cached foldinfos upon `FileType`.
Problem: `vim.treesitter._create_parser()` silently loads the buffer,
bypassing the swapfile prompt.
Solution: Error for an unloaded buffer, ensure buffer is loaded in
`vim.treesitter.start()` instead.
Problem: after #32458, it may still be possible for `busy_start` UI events to be
emitted without matching `busy_stop`s in the terminal.
Solution: do `terminal_enter`'s cursor visibility check immediately after
setting/restoring State so it occurs before events. This ensures that if pending
escape sequences are processed while in `terminal_enter`, the cursor's initial
visibility is set before `is_focused` is checked by `term_settermprop`.
As a result, we can move the call to `showmode` back to where it was originally.
Problem: too many strlen() calls in findfile.c
Solution: refactor findfile.c and remove calls to strlen()
(John Marriott)
closes: vim/vim#16595d6e3c9048d
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: Edit test is flaky when run under valgrind.
Solution: Send some text to the terminal to trigger a redraw.
14f91765c0
Cherry-pick Test_edit_shift_bs() from patch 8.2.4876.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: This keyword is used by GCC and Clang to prevent -Wpedantic
(and other options) from emitting warnings for many GNU C extensions.
This is used heavily in Alpine Linux through musl libc and
foritfy-headers. Without filtering the __extension__ keyword some type
definitions are duplicated. For example, timeval is defined once as
struct timeval { time_t tv_sec; suseconds_t tv_usec; };
and once as:
__extension__ struct timeval { time_t tv_sec; suseconds_t tv_usec; };
Without this patch, the LuaJIT C parser doesn't recognize that these
definitions are equivalent, causing unit test to fail on Alpine Linux.
Solution: Filter out the keyword in filter_complex_blocks.
We need to add a separate variable to keep track of this information,
since we cannot read the length of the valid regions table itself, since
it has holes.
Problem:
on_proc_exit() has a special-case that assumes that the UI client will
never spawn more than 1 child process.
Solution:
If the Nvim server exits, the stream EOF will trigger `rpc_close()` in
the UI client, so we don't need the special case in `on_proc_exit`.
Pass `Channel.exit_status` from `rpc_close()` so that the correct exit
code is reflected.
Contain the vimNotation syntax group, matching this at top level is
unnecessary and very slow.
The removed vimString and vimNumber definitions are broken and/or never
match. They have long been replaced by newer definitions.
closes: vim/vim#1664568ba6c2c6c
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: `showmode` in `terminal_enter` may cause `vpeekc` to process events,
which may handle pending escape sequences. If `CSI ? 25 l` is handled to hide
the cursor, it may remain hidden even after leaving terminal mode if both
`terminal_enter` and (indirectly) `showmode` call `ui_busy_start`, as there is
only one matching call to `ui_busy_stop` after leaving terminal mode.
Solution: let `terminal_enter` handle setting the initial visibility of the
cursor before calling `showmode`.
Closes#32456.
This simple solution assumes it isn't possible for e.g. `os_breakcheck` to be
called indirectly by something else before `terminal_enter` initially handles
cursor visibility and after it restores it, which I think is true.
The "Ukrainian enhanced keymap" allows you to type Ukrainian in Vim
using jcuken Windows layout.
Original file is made by Ivan Korneliuk and can be found at
https://github.com/vansha/ukrainian-enhanced.vim. It is being added here
with the permission of the author.
There is another ukrainian layout already in Vim, namely the
keymap\ukrainian-jcuken.vim script by Anatoli Sakhnik. But this one
differs in way it maps numeric keys. It uses values usual for Windows
users.
closes: vim/vim#166283f60114236
Co-authored-by: Vladyslav Rehan <rehanvladyslav@gmail.com>
Problem: Inconsistencies in get_next_or_prev_match() (after 9.1.1109).
Solution: Change "file" to "entry" or "match" in comments. Use the same
order of branches for PAGEUP and PAGEDOWN (zeertzjq).
closes: vim/vim#16633b6c900be9c
`command` was already resolved via a `completionItem/resolve` request
but only if `additionalTextEdits` were also present, and the
`resolveSupport` capability wasn't listed.
Closes https://github.com/neovim/neovim/issues/32406
Problem: set winbar on a floating window which only have one row will
cause crash.
Solution: when new floating window only have one room don't copy winbar
from target window"
Fix#19464
The legitimacy of the binaries can't be guaranteed and poses a security
risk. A replacement version of these may be introduced in the future in
a more secure manner.
Closes https://github.com/neovim/neovim/issues/32431.
Problem: cannot loop through completion menu with fuzzy and nosort in
'completeopt'
(Tomasz N)
Solution: Reset cur to zero and update compl_shown_match when
'completeopt' contains "nosort" but not "noselect"
(glepnir)
fixes: vim/vim#16624closes: vim/vim#16629c0b7ca406b
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: 'smoothscroll' gets stuck with 'listchars' "eol".
Solution: Count size of 'listchars' "eol" in line size when scrolling.
(zeertzjq)
related: neovim/neovim#32405closes: vim/vim#166272c47ab8fcd
Problem: When expanding a completion item that contains a multi-line word, the word is not deleted correctly.
Solution: If the word contains a line break, delete the text from Context.cursor to the current cursor position.
Problem: autotrigger option of vim.lsp.completion.enable() would trigger
all clients, as long as it matched at least one client's
triggerCharacters.
Solution: trigger only the clients with triggerCharacters matching the
character. overtriggering still happens if any client returns
isIncomplete=true (this case is more involved).
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
- Match Vim9 boolean and null literals in parenthesised expressions and
function argument lists.
- Match read-only registers in expressions.
closes: vim/vim#16622a9c06429ac
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
- Match variables after operators, including line continuations.
- Match option variables without leading whitespace.
- Explicitly match expression subscripts.
- Match Vim9 variables in LHS of assignments and method calls.
- Match option variables (&option) with a dedicated syntax group like
environment variables.
- Match list literals, fixes: vim/vim#5830
- Match :{un}lockvar arguments.
- Match registers and environment variables in :let unpack lists.
- Match lambda expressions
- Match Vim9 scope blocks
- Match variables in :for subject
- Highlight user variables with Normal
- Improve this/super keyword matching, fixes: vim/vim#15970closes: vim/vim#164761aa287e048
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Error thrown when for invalid line number which may be accessed
in an `on_detach` callback at which point line count is
intentionally set to 0.
Solution: Move empty memline check to before line number check.
Problem:
1. Open a relatively large file (so the server needs some time to
process the request).
2. Then immediately execute `:bdelete`.
3. Once the request is completed, the handler will obtain the bufstate
of a buffer already unloaded.
Error executing vim.schedule lua callback: ...7841_1/share/nvim/runtime/lua/vim/lsp/_folding_range.lua:119: assertion failed!
stack traceback:
[C]: in function 'assert'
...7841_1/share/nvim/runtime/lua/vim/lsp/_folding_range.lua:119: in function 'multi_handler'
...7841_1/share/nvim/runtime/lua/vim/lsp/_folding_range.lua:140: in function 'handler'
...HEAD-c137841_1/share/nvim/runtime/lua/vim/lsp/client.lua:669: in function ''
vim/_editor.lua: in function <vim/_editor.lua:0>
Solution:
On detach, cancel all pending textDocument_foldingRange requests.
Problem: Number and statuscolumn highlighting for virtual lines does
not take always take on numhl highlights.
Solution: Apply the appropriate numhl highlight to the number/statuscolumn
of virtual lines, fetching the numhl highlight of the line above
for `virt_line_above == false` lines.
vim-patch:partial:9.1.1084: Unable to persistently ignore events in a window and its buffers
Problem: Unable to persistently ignore events in a window and its buffers.
Solution: Add 'eventignorewin' option to ignore events in a window and buffer
(Luuk van Baal)
Add the window-local 'eventignorewin' option that is analogous to
'eventignore', but applies to a certain window and its buffers. Identify
events that should be allowed in 'eventignorewin', adapt "auto_event"
and "event_tab" to encode this information. Window context is not passed
onto apply_autocmds_group(), and when to ignore an event is a bit
ambiguous when "buf" is not "curbuf", rather than a large refactor, only
ignore an event when all windows into "buf" are ignoring the event.
b7147f8236
vim-patch:9.1.1102: tests: Test_WinScrolled_Resized_eiw() uses wrong filename
Problem: tests: Test_WinScrolled_Resized_eiw() uses wrong filename
(Luuk van Baal, after v9.1.1084)
Solution: Rename the filename to something more unique
bfc7719e48
Problem: CI: uses Ubuntu 22.04 runners
Solution: Switch to Ubuntu 24.04 runners, make a few adjustments for
different $TMPDIR (Drew Vogel)
closes: vim/vim#16442f0ed0e6f63
Co-authored-by: Drew Vogel <dvogel@github>
Problem: insexpand.c hard to read
Solution: refactor slightly to make it better readable
(glepnir)
Problem:
- Complex while loops with nested conditions
- Redundant if branches
- Hard to understand and maintain
Solution:
- Restructure using while(true) with clear break conditions
- Using ternary to replace some if conditions
- Add descriptive comments for each step
closes: vim/vim#1660040891bac5d
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: tests: matchparen plugin test wrongly named
(zeertzjq)
Solution: rename test_matchparen to test_plugin_matchparen
to be consistent with the other plugin tests
related: vim/vim#165997de6b1bb56
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
On Windows, spawning the `nvim --embed` server with `detach=true` breaks
various `tt.setup_child_nvim` tests.
Solution:
Make this behavior opt-in with an env var, temporarily.
Problem: `get_option_value` returns caller owned `Object`s but the
corresponding C apis do not marked `FUNC_API_RET_ALLOC` properly.
Solution: add `FUNC_API_RET_ALLOC` to the C apis.
Problem: tests: timeout might be a bit too small
Solution: increase the test timeout from 30 to 45 seconds
related: vim/vim#16599ec7a4e4d69
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Test may run into timeout when using valgrind.
Solution: Use a longer timeout when using valgrind.
7c2beb48ef
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: tests: plugin tests are named inconsistently
Solution: group them under a common 'plugin' prefix
related: vim/vim#16599934d9ab3a2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: The behavior of the visual search mappings aren't consistent
with their normal mode counterparts.
- The count isn't considered
- Searching with an empty selection will match every character in the
buffer
- Searching backwards only jumps back when the cursor is positioned at
the start of the selection.
Solution:
- Issue `n` `v:count1` times
- Error out and exit visual mode when the selection is empty
- Detect when the cursor is not at the start of the selection, and
adjust the count accordingly
Also, use the search register instead of the more error-prone approach
of feeding the entire search string as an expression
Problem:
No obvious way to see diagnostics without configuring it first.
Solution:
Add `Show Diagnostics`, `Show All Diagnostics` and `Configure
Diagnostics` buttons to the context menu.
Problem:
With some LSP servers, `vim.lsp.buf.signature_help` (CTRL-s in insert-mode)
highlights the first parameter regardless of the current cursor position.
- On some lsps the `textDocument/signatureHelp` response only includes the
`activeParameter` field on the `lsp.SignatureHelp` object.
```lua
{
{
result = {
activeParameter = 2,
signatures = {
{
documentation = {
kind = "markdown",
value = ""
},
label = "getBuyers(ctx context.Context, orderDB boil.ContextExecutor, supplierID string) ([]*BuyerWithLocation, error)",
parameters = {
{
label = "ctx context.Context"
},
{
label = "orderDB boil.ContextExecutor"
},
{
label = "supplierID string"
}
}
}
}
}
}
}
```
Solution:
Ensure we retain this information before showing the signature information.
Closes#32381
This automatically downloads and uses the correct luals binary for the
currently used system. `make luals` will run luals on all lua files in
`runtime`.
We download lua-language-server manually instead of relying on
contributors downloading it on their own (like with stylua) as
lua-language-server is updated frequently which may cause unnecessary
friction. Therefore, we download a pinned version of luals which we then
can manually bump when needed. This can be re-evaluated if luals becomes
more stable in the future.
Currently this is not run when using `make lint` since cmake style "file
caching" doesn't seem possible at the moment. This is because checking a
single file doesn't seem to work.
Work on https://github.com/neovim/neovim/issues/24563.
Problem:
`vim.tbl_get(tbl, nil, 1)` returns `tbl` itself. In this case, `keys` is not
empty, but `ipairs` skips the iteration:
local keys = { nil, 1 }
assert(#keys == 2)
for i, k in ipairs(keys) do
assert(false, 'unreachable')
end
Solution:
Use `select("#", ...)` and `select(i, ...)` to ensure consistency for count and
iteration.
Problem: filetype: cmmt files are not recognized
Solution: detect '*.cmmt' as trace32 filetype
(Christian Sax)
"*.cmmt" files use the same syntax as regular TRACE32 scripts,
but are intended as a kind of script template.
closes: vim/vim#16598746fe54d4f
Co-authored-by: Christoph Sax <c_sax@mailbox.org>
Problem: completion doesn't work with multi lines
(Łukasz Jan Niemier)
Solution: handle linebreaks in completion code as expected
(glepnir)
fixes: vim/vim#2505closes: vim/vim#1537376bdb82527
Problem: setreg() doesn't correctly handle mbyte chars in blockwise
mode
Solution: use mb_ptr2len_len function pointer (Yee Cheng Chin)
setreg() will automatically calculate the width when a blockwise mode is
specified, but it does not properly calculate the line widths of mbyte
characters when value is passed as newline-terminated string. It does
work when value is passed as a list of lines though.
Fix this by properly using the mbyte function pointer to increment the
loop counter.
closes: vim/vim#16596a17f8bfb28
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Calculating register width is not always needed. (Christian
Brabandt)
Solution: Only calculate the width when the type is MBLOCK.
6c4c404c58
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: ASAN error when using text from the clipboard.
Solution: Get width of each character.
24951a67c2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: When 'clipboard' is "unnamed" zp and zP do not work correctly.
Solution: Pass -1 to str_to_reg() and fix computing the character width
instead of using the byte length. (Christian Brabandt,
closesvim/vim#8301, closesvim/vim#8317)
6e0b553fa1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
this change includes the following changes:
- a macro option must be #1–#9
- add \providecommand
- add starred versions of \newcommand, \newenvironment, and their
variants
- add number of arguments to \(re)newenvironment
a35040f795
Co-authored-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Problem: There is no check for buffer validity before processing
semantic tokens response. This can lead to `Invalid buffer id` error
if processing request takes a long time and the buffer is wiped out.
For example, this can happen after by accident navigating to a buffer
from different project which leads to first loading project's
workspace and *then* processing semantic tokens. During that time
a buffer can be wiped out, as navigation to it was by accident.
Solution: Add extra check for buffer validity before processing semantic
tokens response.
Problem: has('bsd') is true for GNU/Hurd
Solution: exclude GNU/Hurd from BSD feature flag
(Zhaoming Luo)
GNU/Hurd, like Mac OS X, is a BSD-based system. It should exclude
has('bsd') feature just like what Mac OS X does. The __GNU__ pre-defined
macro indicates it's compiled for GNU/Hurd.
closes: vim/vim#16580a41dfcd55b
Co-authored-by: Zhaoming Luo <zhmingluo@163.com>
Problem: filetype: Mill files are not recognized
Solution: detect '*.mill' files as scala filetype
(author)
In the past [Mill](https://mill-build.org/mill/index.html) build files
were always `build.sc` and treated as Scala files. However as the 0.12.x
series of mill you can create a `build.mill` file. You can see a lot of
examples of this if you search
[GitHub](https://github.com/search?q=build.mill&type=code). This small
change just ensures that if you have a `*.mill` file it treats it as a
Scala file.
closes: vim/vim#165859c8f9b10fc
Co-authored-by: Chris Kipp <ckipp@pm.me>
Problem: Syntax engine interpreted contains=TOP as matching nothing
inside included files, since :syn-include forces HL_CONTAINED
on for every included item. After 8.2.2761, interprets
contains=TOP as contains=@INCLUDED, which is also not correct
since it doesn't respect exclusions, and doesn't work if there
is no @INCLUDED cluster.
Solution: revert patch 8.2.2761, instead track groups that have had
HL_CONTAINED forced, and interpret contains=TOP and
contains=CONTAINED using this. (Theodore Dubois)
fixes: vim/vim#11277closes: vim/vim#16571f50d5364d7
Co-authored-by: Theodore Dubois <tblodt@icloud.com>
Now `:InspectTree` will show missing nodes as e.g. `(MISSING identifier)`
or `(MISSING ";")` rather than just `(identifier)` or `";"`. This is
doable because the `MISSING` keyword is now valid query syntax.
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
Problem: vim_strnchr() is strange and unnecessary (after v9.1.1009)
Solution: Remove vim_strnchr() and use memchr() instead. Also remove a
comment referencing an #if that is no longer present.
vim_strnchr() is strange in several ways:
- It's named like vim_strchr(), but unlike vim_strchr() it doesn't
support finding a multibyte char.
- Its logic is similar to vim_strbyte(), but unlike vim_strbyte() it
uses char instead of char_u.
- It takes a pointer as its size argument, which isn't convenient for
all its callers.
- It allows embedded NULs, unlike other "strn*" functions which stop
when encountering a NUL byte.
In comparison, memchr() also allows embedded NULs, and it converts bytes
in the string to (unsigned char).
closes: vim/vim#1657934e1e8de91
Problem: getchar_spec may fail when screen:expect_unchanged() doesn't
wait long enough.
Solution: Add poke_eventloop() before screen:expect_unchanged().
Problem: 'diffopt' "linematch" cannot be used with {n} less than 10
digits (after v9.1.1022)
Solution: Fix off-by-one error when checking for digit (zeertzjq)
closes: vim/vim#16577ccd7f454fc
Problem: no sanitize check when running linematch
Solution: add sanitize check before applying the linematch algorithm,
similar to diff_find_change() (Jonathon)
closes: vim/vim#16446ca307efe48
Co-authored-by: Jonathon <jonathonwhite@protonmail.com>
Problem: Coverity complains about dereferencing NULL pointer
Solution: Verify curdiff is not null before dereferencing it
closes: vim/vim#16437a9f77be922
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Strange error when heredoc marker starts with "trim".
Solution: Check for whitespace after "trim" or "eval" (zeertzjq)
For :python3 etc., a heredoc marker that starts with a lower-case letter
is valid, and when it starts with "trim" it works in a script but not in
a function, and this PR makes it works in a function.
For :let, a heredoc marker that starts with a lower-case letter is not
valid, but when it starts with "trim" or "eval" the error can be a bit
confusing in a function, and this PR make it less confusing.
closes: vim/vim#16574449c2e5454
Problem: tests: test_compiler fails on Windows without Maven.
Solution: Add Xspotbugs directory to $PATH when mvn is not available
(zeertzjq).
closes: vim/vim#1657623da16d3d0
Problem: SpotBugs compiler can be improved
Solution: runtime(compiler): Improve defaults and error handling for
SpotBugs; update test_compiler.vim (Aliaksei Budavei)
runtime(compiler): Improve defaults and error handling for SpotBugs
* Keep "spotbugs#DefaultPreCompilerTestAction()" defined but
do not assign its Funcref to the "PreCompilerTestAction"
key of "g:spotbugs_properties": there are no default and
there can only be introduced arbitrary "*sourceDirPath"
entries; therefore, this assignment is confusing at best,
given that the function's implementation delegates to
whatever "PreCompilerAction" is.
* Allow for the possibility of relative source pathnames
passed as arguments to Vim for the Javac default actions,
and the necessity to have them properly reconciled when
the current working directory is changed.
* Do not expect users to remember or know that new source
files ‘must be’ ":argadd"'d to be then known to the Javac
default actions; so collect the names of Java-file buffers
and Java-file Vim arguments; and let users providing the
"@sources" file-lists in the "g:javac_makeprg_params"
variable update these file-lists themselves.
* Strive to not leave behind a fire-once Syntax ":autocmd"
for a Java buffer whenever an arbitrary pre-compile action
errors out.
* Only attempt to run a post-compiler action in the absence
of failures for a pre-compiler action. Note that warnings
and failures are treated alike (?!) by the Javac compiler,
so when previews are tried out with "--enable-preview",
remember about passing "-Xlint:-preview" too to also let
SpotBugs have a go.
* Properly group conditional operators when testing for key
entries in a user-defined variable.
* Also test whether "javaExternal" is defined when choosing
an implementation for source-file parsing.
* Two commands are provided to toggle actions for buffer-local
autocommands:
- SpotBugsRemoveBufferAutocmd;
- SpotBugsDefineBufferAutocmd.
For example, try this from "~/.vim/after/ftplugin/java.vim":
------------------------------------------------------------
if exists(':SpotBugsDefineBufferAutocmd') == 2
SpotBugsDefineBufferAutocmd BufWritePost SigUSR1
endif
------------------------------------------------------------
And ":doautocmd java_spotbugs User" can be manually used at will.
closes: vim/vim#16140368ef5a48c
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem:
's 'guicursor' cursor color not working in suckless terminal (ST).
Nvim's builtin terminfo for ST lacks a "Cs" entry, even though ST does
support the cursor color to be set via termcodes.
Solution:
- In `augment_terminfo()`, assume that `st` always supports color cursor.
- Thomas Dickey will add a "Cs" entry for st to ncurses, from which
Nvim's builtin terminfos are generated.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: "clear" macros are not always used.
Solution: Use ALLOC_ONE, VIM_CLEAR, CLEAR_POINTER and CLEAR_FIELD in more
places. (Yegappan Lakshmanan, closesvim/vim#12104)
960dcbd098
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Cannot use Perl heredoc in nested :def function. (Virginia
Senioria)
Solution: Only concatenate heredoc lines when not in a nested function.
(closesvim/vim#10415)
d881d15984
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Arguments of a function are missing after failing to redefine
it (after 8.2.2505), and heap-use-after-free with script-local
function (after 9.1.1063).
Solution: Don't clear arguments or free uf_name_exp when failing to
redefine an existing function (zeertzjq)
closes: vim/vim#1656704d2a3fdc0
Problem: heap-use-after-free and stack-use-after-scope with :14verbose
when using :return and :try (after 9.1.1063).
Solution: Move back the vim_free(tofree) and the scope of numbuf[].
(zeertzjq)
closes: vim/vim#165632101230f40
Problem: too many strlen() calls in userfunc.c
Solution: refactor userfunc.c and remove calls to strlen(),
drop set_ufunc_name() and roll it into alloc_ufunc(),
check for out-of-memory condition in trans_function_name_ext()
(John Marriott)
closes: vim/vim#16537b32800f7c5
Add missing change to call_user_func() from patch 8.1.1007.
Consistently use PRIdSCID instead of PRId64 for script IDs.
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: Crash and/or memory leak when redefining function after error.
Solution: Clear pointer after making a copy. Clear arrays on failure.
(closesvim/vim#11774)
f057171d8b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: function expanded name is cleared when sourcing a script
again.
Solution: Only clear the expanded name when deleting the function.
(closesvim/vim#6707)
c4ce36d486
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: def_function() may return pointer that was freed.
Solution: Set "fp" to NULL after freeing it.
a14e697547
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot control cursor positioning of getchar().
Solution: Add "cursor" flag to {opts}, with possible values "hide",
"keep" and "msg".
related: vim/vim#10603closes: vim/vim#16569edf0f7db28
Problem:
When an evaluation {-item calls `nvim_eval_statusline()`, that nested
call may overwrite the same memory used for `stl_items`.
Solution:
Make `curitem` static and use it to compute an offset to avoid
overwriting `stl_items` in nested calls to `build_stl_str_hl()`. Move
miscellaneous statusline tests into `describe()` block.
When given, only that range will be checked for validity rather than the
entire tree. This is used in the highlighter to save CPU cycles since we
only need to parse a certain region at a time anyway.
This means that all work previously done by a `_parse()` iteration will
be kept in future iterations. This prevents it from running indefinitely
in some cases where the file is very large and there are 2+ injections.
Problem:
When running an initial parse, parse() returns an empty table rather
than an actual range. In `languagetree.lua`, we manually check if
a parse was incremental to determine the changed parse region.
Solution:
- Always return a range (in the C side) from parse().
- Simplify the language tree code a bit.
- Logger no longer shows empty ranges on the initial parse.
This simplifies some logic in `languagetree.lua`, removing the need for
`_has_regions`, and removing side effects in `:included_regions()`.
Before:
- Edit is made which sets `_regions = nil`
- Upon the next call to `included_regions()` (usually right after we
marked `_regions` as `nil` due to an `_iter_regions()` call), if
`_regions` is nil, we repopulate the table (as long as the tree
actually has regions)
After:
- Edit is made which resets `_regions` if it exists
- `included_regions()` no longer needs to perform this logic itself, and
also no longer needs to read a `_has_regions` variable
Compute the diagnostics per line when `show` is called, allowing for
O(1) access for the diagnostics to display when the cursor line or the
list of diagnostics haven't changed.
Before the 7121983c45 refactoring this
loop added highlights from a `buf_hls` list that had filtered out
elements with `Attrs.None`. After the refactoring this added highlights
from `hls` directly, and those elements would fail with e.g.:
$ nvim 'man://math.h(0)'
Error detected while processing command line:
Error executing Lua callback: /usr/share/nvim/runtime/lua/man.lua:205: Invalid 'hl_group': Expected Lua string
stack traceback:
[C]: in function 'nvim_buf_add_highlight'
/usr/share/nvim/runtime/lua/man.lua:205: in function 'highlight_man_page'
/usr/share/nvim/runtime/lua/man.lua:632: in function 'init_pager'
/usr/share/nvim/runtime/plugin/man.lua:9: in function </usr/share/nvim/runtime/plugin/man.lua:6>
Problem: preinsert text completions not deleted with <C-W>/<C-U>
(ddad431, after v9.1.1059)
Solution: handle <C-W> or <C-U> specifically and clear the completion
(glepnir)
fixes: vim/vim#16557closes: vim/vim#16565001c26cd61
Problem:
The current implementation uses a global augroup for virtual lines in
diagnostics, which can lead to conflicts and unintended behavior when
multiple namespaces/buffers are involved.
Solution:
Refactor the code to use a namespace-specific augroup for virtual lines.
This ensures that each namespace has its own augroup.
Scope the clear commands to only the relevant buffer.
Problem: getchar() can't distinguish between C-I and Tab.
Solution: Add {opts} to pass extra flags to getchar() and getcharstr(),
with "number" and "simplify" keys.
related: vim/vim#10603closes: vim/vim#16554e0a2ab397f
Cherry-pick tv_dict_has_key() from patch 8.2.4683.
Problem:
`AucmdExecutable` adds 2 layers of indirection. Although formalizing
a `union` is good practice for shared interfaces, this struct is mainly
for `autocmd_register` which is internal to this module.
Solution:
- Store the cmd/fn fields directly on the `AutoCmd` struct.
- Drop `AucmdExecutable` and related structures.
Port one_function_arg() and get_function_body() from Vim.
vim-patch:8.2.2865: skipping over function body fails
Problem: Skipping over function body fails.
Solution: Do not define the function when skipping.
d87c21a918
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem:
Event handler declared with `once=true` can re-trigger itself (i.e. more
than once!) by calling `nvim_exec_autocmds` or `:doautocmd`.
Analysis:
This happens because the callback is executed before deletion/cleanup
(`aucmd_del`). And calling `aucmd_del` before `call_autocmd_callback`
breaks the autocmd execution...
Solution:
Set `ac->pat=NULL` to temporarily "delete" the autocmd, then restore it
after executing the callback.
Fix#25526
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: completion: input text deleted with preinsert when adding leader
Solution: remove compl_length and check the ptr for being equal
to pattern when preinsert is active (glepnir)
closes: vim/vim#16545bfb4eea786
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: currently `CursorLine`, `Folded`, `StatusLineNC` highlight
groups have the same background color in default color scheme (Grey3).
This is a result of optimizing their highlighting to be different from
`Normal` but not draw too much attention.
However, this design has a usability issue as those groups are
sometimes appear together which can make it hard (but not impossible)
to differentiate between them.
This was previously partially resolved with `StatusLineNC` using Grey1
as background (and thus be different from `CursorLine` but closer to
`Normal`), but optimizing more towards it being a visible separator
between windows was decided to be more important.
Solution: make `Folded` use Grey1 and `StatusLineNC` use Grey4. This
makes all three highlight groups have different backgrounds with the
following consequences:
- Folds now have the same background as floating windows. It makes
them there differentiable only by the value of 'foldtext' (which
is usually enough). Optimizing for the case "cursor line is next
to the fold" seems to be more useful than for the case "make folds
in floating window differ by background".
- Statusline of inactive windows now draw more attention to them.
The benefits are that they are different from cursor column and
are better window separators.
- Inactive tabline (both `TabLine` and `TabLineFill`) now also draws
a bit more attention to it (as they are linked to `StatusLineNC`)
but with the benefit of also being different from `CursorLine`.
Problem: Vim doesn't highlight to be inserted text when completing
Solution: Add support for the "preinsert" 'completeopt' value
(glepnir)
Support automatically inserting the currently selected candidate word
that does not belong to the latter part of the leader.
fixes: vim/vim#3433closes: vim/vim#16403edd4ac3e89
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: `cmdline_show` is emitted unnecessarily each event
loop iteration, because `cmdline_was_last_drawn` is never set.
Solution: Keep track of whether the cmdline was last drawn to avoid
unnecessarily emitting cmdline_show. Set `redraw_state` to
emit `cmdline_pos` when emitting `CursorMovedC`. Only emit
`cmdline_pos` when cmdline was last drawn.
Problem: `TSHighlighter:destroy()` causes double-processing of the modeline
and failure of `b:undo_ftplugin`.
Solution: Disable modeline in `TSHighlighter:destroy()` by setting `modeline=false`
if executing `syntaxset` autocommands for the `FileType` event.
Co-authored-by: Daniel Petrovic <daniel.petrovic@ebcont.com>
Since these assertions all use a common function to perform the test
assertions, it's difficult to figure out which test failed:
ERROR test/unit/testutil.lua @ 785: vim_snprintf() positional arguments
test/unit/testutil.lua:757: test/unit/testutil.lua:741: (string) '
test/unit/strings_spec.lua:143: Expected objects to be the same.
Passed in:
(number) 6400
Expected:
(number) 6'
exit code: 256
Adding context to the assertion makes it clearer what the problem is:
ERROR test/unit/testutil.lua @ 785: vim_snprintf() positional arguments
test/unit/testutil.lua:757: test/unit/testutil.lua:741: (string) '
test/unit/strings_spec.lua:149: snprintf(buf, 0, "%1$0.*2$b", cdata<unsigned int>: 0xf78d0f38, cdata<int>: 0xf78dc4e0) = 001100
Expected objects to be the same.
Passed in:
(number) 6400
Expected:
(number) 6'
exit code: 256
**Problem:** In the case where the user sets the treesitter foldexpr upon startup in
their `init.lua`, the fold info will be calculated before the parser has
been loaded in, meaning folds will be properly calculated until edits or
`:e`.
**Solution:** Refresh fold information upon `VimEnter` as a sanity check
to ensure that a parser really doesn't exist before always returning
`'0'` in the foldexpr.
**Problem:** Currently, if users want to efficiently disable injections,
they have to delete the injection query files at their runtime path.
This is because we only check for existence of the files before running
the query over the entire buffer.
**Solution:** Check for existence of query files, *and* that those files
actually have captures. This will allow users to just comment out
existing queries (or better yet, just add their own injection query to
`~/.config/nvim` which contains only comments) to disable running the
query over the entire buffer (a potentially slow operation)
Problem: dircolors syntaxt termguicolors support was not taking dynamic
termguicolors changes into account.
Solution: initializing missing script-internal data on dynamic
termguicolors change.
Problem:
`nvim_win_set_config` cannot set the title and footer independently.
When only one is given, the other is reset to the default of "left".
Solution:
Reuse existing title/footer value if not provided.
While at it, also increase the maximum number of lines to check to 500.
fixes: vim/vim#1651399181205c5
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: tests: off-by-one error in CheckCWD in test_debugger.vim
Solution: Fix off-by-one in CheckCWD leading to local tests failure
(Yee Cheng Chin)
Vim's test_debugger's Test_debug_backtrace_level test will fail if you
happen to run it in a Vim repository with full path of directory being
exactly 29 characters (e.g. `/Users/bob/developing/src/vim`). The test
does term dump comparison and the printout will overflow if the CWD is
too long. It does have a function to skip to test if it detects that but
it's off by one leading to this one situation where it will fail.
The reason why the logic didn't account for this is that Vim's message
printing will overflow the text if it prints a message at exactly the
width of the terminal. This could be considered a bug / quirk but that
will be another issue.
closes: vim/vim#165173acfbb4b54
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: "nosort" enables fuzzy filtering even if "fuzzy" isn't in
'completeopt' (after v9.1.1049)
Solution: Only enable fuzzy filtering when "fuzzy" is in 'completeopt'.
(zeertzjq)
closes: vim/vim#16510d65aa1bbdb
Problem: Right aligned virtual text can cover up buffer text if virtual
text is too long
Solution: An additional option for `virt_text_pos` called
`eol_right_align` has been added to truncate virtual text if it would
have otherwise covered up buffer text. This ensures the virtual text
extends no further left than EOL.
Problem: nlua_call_ref_ctx() does not pop the return value in fast
context that did not error.
Solution: Fall through to end; calling nlua_call_pop_retval().
Problem: Some CI jobs are redundant: `RelWithDebInfo` is already tested
on Linux-Arm64; `MinSizeRel` and Ninja Multi Config are not sufficiently
relevant in practice to spend CI cycles on.
Solution: Remove `build-types` job.
Problem: too many strlen() calls in os_unix.c
Solution: refactor os_unix.c and remove calls to strlen()
(John Marriott)
closes: vim/vim#16496efc41a5958
Omit os_expand_wildcards() change: Nvim's code is more complicated and
harder to refactor.
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: A right-click on the 'statuscolumn' does not open the
popupmenu, even if a cell without a clickdef is clicked.
Clicking the %C fold item does not open/close the fold.
Solution: Open the popupmenu when there is no clickdef like right-clicking
the sign/numbercolumn does. Fill "linebuf_vcol" when drawing the
'statuscolumn' to handle foldcolumn item clicks.
Problem: setting `loclist = true` makes `on_list` being ignored. This
was not a problem before, but with `vim.lsp.buf.document_symbol` using
`loclist = true` as default it is needed to explicitly pass `loclist =
false` in order to use custom `on_list`.
Solution: prefer `on_list` over `loclist` and document the latter as
taking effect only in the default handler.
Problem: Combined highlighting was not applied to nvim_eval_statusline(),
and 'statuscolumn' sign segment/numhl highlights.
Solution: Add an additional `groups` element to the return value of
`nvim_eval_statusline()->highlights`. This is an array of stacked
highlight groups (highest priority last). Also resolve combined
highlights for the 'statuscolumn' sign segment/numhl highlights.
Expose/synchronize some drawline.c logic that is now mimicked in
three different places.
Problem: filetype: just files are not recognized
Solution: adjust filetype detection pattern, detect just shebang line,
include just ftplugin, indent and syntax plugin
(Peter Benjamin)
closes: vim/vim#1646672755b3c8e
Co-authored-by: Peter Benjamin <petermbenjamin@gmail.com>
Problem: filetype: N-Tripels and TriG files are not recognized
Solution: detect '*.nt' files as ntriples filetype and '*.trig' files
as trig filetype (Gordian Dziwis)
closes: vim/vim#16493c04334c33f
Co-authored-by: Gordian Dziwis <gordian@dziw.is>
Problem: Crash after scrolling and pasting in silent Ex mode.
(fizz-is-on-the-way)
Solution: Don't move cursor to line 0 when scrolling.
(zeertzjq)
closes: vim/vim#16506df098fedbc
This has been possible in the "backend" for a while but
API was missing.
Followup: we will need a `details2=true` mode for `nvim_get_hl_id_by_name`
to return information in a way forward compatible with even further
enhancements.
Problem:
Incremental preview is not allowed on 'nomodifiable' buffers.
Solution:
- Allow preview on 'nomodifiable' buffers.
- Restore the 'modifiable' option in case the preview function changes it.
Problem: We want to keep track of the current message column, which is
done very rudimentary for ext_messages; only checking if the
message ends in a newline to reset the column, while computing
the entire cellwidth of the message, which may contain
(multiple) newlines not necessarily at the end (since 21718c6).
This introduced a noticeable delay for large messages (e.g. :=vim).
Solution: Calculate the cellwidth of the message after the last newline.
Use it to keep track of the current message column. This might
not be a functional change currently, since it only affects
messages with (multiple) newlines not at the end of a message,
which I don't think we emit internally, and msg_col is reset for
a new kind. It does fix the performance problem.
Problem:
vim.lsp.completion.enable(true, client.id, bufnr)
vim.lsp.completion.enable(false, client.id, bufnr)
Error detected while processing LspDetach Autocommands for "*":
Error executing lua callback: …/lsp/completion.lua:701: Vim:E367: No such group: "vim/lsp/completion-22"
stack traceback:
[C]: in function 'nvim_del_augroup_by_name'
…/lsp/completion.lua:701: in function 'disable_completions'
…/lsp/completion.lua:724: in function 'enable'
Solution:
Delete the correct augroup.
Problem:
The filetype for the floating window buffer is being set before its context is fully initialized.
This results in `FileType` events not receiving the correct context.
Solution:
Set the filetype after the floating preview window and its buffer variables are
fully configured to ensure proper context is provided.
This was kept for a while as it was a useful short hand and initially
matched what highlights what actually properly implemented. But now
|vim.hl.range()| is a better high-level shorthand with full support for
native multi-line ranges.
Problem: filetype: setting bash filetype is backwards incompatible
Solution: revert patch v9.1.0965, detect bash scripts again as sh
filetype
This reverts commit b9b762c21f2b61e0e7d8fee43d4d3dc8ecffd721.
related: vim/vim#16309727c567a09
Co-authored-by: Christian Brabandt <cb@256bit.org>
vim-patch:9.1.1033: tests: shaderslang was removed from test_filetype erroneously
Problem: tests: shaderslang was removed from test_filetype erroneously
(Christian Clason, after v9.1.1030)
Solution: restore the test
1d2867df0c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Follow up to https://github.com/neovim/neovim/pull/32072
If there is no prefix (e.g. at the start of word boundary or a line), it
always used the `filterText` because the `match` function always
returned false.
Problem: Not able to open document symbols for different buffers
Solution: Use the location list as default.
To switch back to previous behavior (qflist):
vim.lsp.buf.document_symbol({ loclist = false })
Fixes: #31832
- Match is? and isnot? operators.
- Limit other comparison operators to one match modifier rather than
two.
closes: vim/vim#164828dec6c2e6c
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem:
Calling `xstrdup` with a NULL pointer causes a SIGSEGV if `lua_tostring` returns
NULL in `nlua_luv_thread_common_cfpcall`.
Crash stack trace:
- `_platform_strlen` → `xstrdup` (memory.c:469)
- `nlua_luv_thread_common_cfpcall` (executor.c:281)
Solution:
Check if `lua_tostring` returns NULL and pass NULL to `event_create` to avoid the crash.
Making this opt-out (on by default) was the wrong choice from the
beginning. It is too visually noisy to be enabled by default.
BREAKING CHANGE: Users must opt-in to the diagnostic virtual text
handler by adding
vim.diagnostic.config({ virtual_text = true })
to their config.
Dr. Chip retired some time ago and is no longer maintaining the netrw
plugin. However as a runtime plugin distributed by Vim, it important to
maintain the netrw plugin in the future and fix bugs as they are
reported.
So, split out the netrw plugin as an additional package, however include
some stubs to make sure the plugin is still loaded by default and the
documentation is accessible as well.
closes: vim/vim#163689cfdabb074
Co-authored-by: Luca Saccarola <github.e41mv@aleeas.com>
- highlight more C keywords, including some from C23
Conditionally highlight C23 features:
- #embed, #elifdef and #elifndef preprocessor directives
- predefined macros
- UTF-8 character constants
- binary integer constants, _BitInt literals, and digit separators
- nullptr_t type and associated constant
- decimal real floating-point, bit precise and char types
- typeof operators
Matchit:
- update for new preprocessor directives
fixes: vim/vim#13667fixes: vim/vim#13679closes: vim/vim#12984c2a967a1b9
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Co-authored-by: Albin Ahlbäck <albin.ahlback@gmail.com>
Problem: too many strlen() calls in screen.c
Solution: refactor screen.c and remove calls to strlen(),
verify that leadmultispace != NULL (John Marriott)
closes: vim/vim#16460c15de972e8
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem:
With language servers like lemminx, completing xml tags like `<mo` first
shows the right candidates (`modules`) but after typing `d` the
candidates disappear.
This is because the server returns:
[...]
filterText = "<module",
label = "module",
textEdit = {
newText = "<module>$1</module>$0",
Which resulted in `module` being used as `word`, and `module` doesn't
match the prefix `<mo`. Typing `d` causes the `complete()` filtering
mechanism to kick in and remove the entry.
Solution:
Use `<module` from the `filterText` as `word` if the textEdit/label
heuristic doesn't match.
Problem: string might be used without a trailing NUL (after v9.1.0997)
Solution: Make sure that the buffer is NUL terminated
closes: vim/vim#1645770dfc374ec
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: no way to get current selected item in a async context
Solution: add completed flag to show the entries of currently selected
index item (glepnir)
closes: vim/vim#16451037b028a22
Co-authored-by: glepnir <glephunter@gmail.com>
This commit adds basic support for the kitty keyboard protocol to
Neovim's builtin terminal. For now only the first mode ("Disambiguate
escape codes") is supported.
* refactor(options): generic expand and did_set callbacks
Problem:
Many options have similar callbacks to check the values are valid.
Solution:
Generalize these callbacks into a single function that reads the option
table.
* refactor: gen_options.lua
refactor: gen_options.lua - inline get_cond
* refactor(options): use a simpler format for the common default
Problem: Vim9: Patch 9.1.1013 causes a few problems
Solution: Translate the function name only when it is a string
(Yegappan Lakshmanan)
fixes: vim/vim#16453closes: vim/vim#164509904cbca41
Cherry-pick call() change from patch 9.0.0345.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: Regression caused by patch v9.1.0646
Solution: Translate the function name before invoking it in call()
(Yegappan Lakshmanan)
fixes: vim/vim#16430closes: vim/vim#164456289f91591
N/A patch:
vim-patch:8.2.4176: Vim9: cannot use imported function with call()
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: If a (vim.ui_attach) cmdline_hide callback triggers a redraw,
it may cause cmdline_show events for an already exited cmdline.
Solution: Avoid emitting cmdline_show event when ccline.cmdbuff is
already NULL. Unset ccline.cmdbuff before emitting cmdline_hide.
Problem:
`yx` uses "y" prefix, which shadows a builtin operator.
Solution:
Use `g=` (in the form of `g==` currently), drawing from precedent of
CTRL-= and 'tpope/vim-scriptease'.
Problem:
Per the documentation, passing `false` as the `enable` parameter of
`vim.lsp.enable()` should disable the given LSP(s), but it does not work
due to a logic error.
Specifically, `enable == false and nil or {}` will always evaluate to
`{}` because `nil` is falsy.
Solution:
Correct the conditional statement.
- new unokai colorscheme (similar/inspired by monokai)
- the rest: add explicit PopupSelected link to PmenuSel
closes: vim/vim#16443045564d0a7
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: Coverity complains about dereferencing NULL value
Solution: Check that cms2 is not null
closes: vim/vim#164381ac53b84ad
Co-authored-by: Christian Brabandt <cb@256bit.org>
When `root_dir` is a function it can (and often will) call the provided
callback function in a fast API context (e.g. in the `on_exit` handler
of `vim.system`). When the callback function is executed we should
ensure that it runs vim.lsp.start on the main event loop.
On master (and also before #31539) closing a window could cause the
used wininfo for a buffer to change. This is due to always removing the
previous NULL wininfo when deleting a window, even if that wininfo had
higher priority than the the deleted window's own wininfo.
Instead delete the wininfo with lowest priority. This retains the memory
saving efect while not affecting the effective value of window options
and so on.
Problem: Anchoring a floating window to the tabline and laststatus is
cumbersome; requiring autocommands and looping over all
windows/tabpages.
Solution: Add new "tabline" and "laststatus" options to the `relative`
field of nvim_open_win() to place a window relative to.
Problem: It was decided on Matrix chat that multitype options won't be necessary for Neovim options, and that options should only have a single canonical type. Therefore the code for supporting multitype options is unnecessary.
Solution: Remove the additional code that's used to provide multitype option support.
**Problem:** The treesitter `foldexpr` runs synchronous parses to
calculate fold levels, which eliminates async parsing performance in the
highlighter.
**Solution:** Migrate the `foldexpr` to also calculate and apply fold
levels asynchronously.
Problem:
The floating window for hover and signature help always cuts off a few lines,
because the `_make_floating_popup_size` function counts empty lines as having
zero height.
Solution:
Ensure the height is at least 1.
Problem:
Whether an option is allowed to be empty isn't well defined and
isn't properly checked.
Solution:
- For non-list string options, explicitly check the option value
if it is empty.
- Annotate non-list string options that can accept an empty value.
- Adjust command completion to ignore the empty value.
- Render values in Lua meta files
The code represents a useful pattern in normal mode where remapping
`<tab>` will implicitly also remap `<c-i>` unless you remap that
explicitly. This relies on the _unmapped_ behavior being identical which
is not true in terminal mode, as vterm can distinguish these keys.
Vim seems to entangle this with kitty keyboard mode detection which
is irrelevant for us. Conditional fallbacks depending on
keyboard mode could be done completely inside `vterm/` without getchar.c
getting involved, I would think.
Problem: Popup menu internal error with some abbr in completion item.
Solution: Don't compute attributes when there is no corresponding text.
Reduce indent in pum_redraw() while at it (zeertzjq).
fixes: vim/vim#16427closes: vim/vim#164353a0cc36c69
**Problem:** `vim.treesitter.get_parser()` and `vim.treesitter.start()`
both parse the tree before returning it. This is problematic because if
this is a sync parse, it will stall the editor on large files. If it is
an async parse, the functions return stale trees.
**Solution:** Remove this parsing side effect and leave it to the user
to parse the returned trees, either synchronously or asynchronously.
**Problem:** Parsing can be slow for large files, and it is a blocking
operation which can be disruptive and annoying.
**Solution:** Provide a function for asynchronous parsing, which accepts
a callback to be run after parsing completes.
Co-authored-by: Lewis Russell <lewis6991@gmail.com>
Co-authored-by: Luuk van Baal <luukvbaal@gmail.com>
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
**Problem:** Query parsing uses a weak cache which is invalidated
frequently
**Solution:** Make the cache strong, and invalidate it manually when
necessary (that is, when `rtp` is changed or `query.set()` is called)
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
Problem: filetype: various ignore are not recognized
Solution: detect rg/docker/npm/vvsce ignore files as 'gitgnore' filetype
(Wu, Zhenyu)
Not only prettier, but many programs also support ignore files (like rg,
docker, npm, vscode). So use the gitignore filetype for them due to same syntax
closes: vim/vim#164288cbe2e0a0a
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: [security]: heap-buffer-overflow with visual mode when
using :all, causing Vim trying to access beyond end-of-line
(gandalf)
Solution: Reset visual mode on :all, validate position in gchar_pos()
and charwise_block_prep()
This fixes CVE-2025-22134
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-5rgf-26wj-48v8c9a1e257f1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: completion text is highlighted even with no pattern found
Solution: use ins_compl_leader_len() instead of checking
compl_leader.length (glepnir)
closes: vim/vim#164229fddb8ae77
Co-authored-by: glepnir <glephunter@gmail.com>
BREAKING CHANGE: This changes the list of diagnostics that are passed to
a diagnostic handler. If a handler is already filtering by severity
itself then this won't break anything, since the handler's filtering
will become a no-op. But handlers which depend on receiving the full
list of diagnostics may break.
Note that diagnostics are only filtered if the handler's configuration
has the `severity` option set. If `severity` is not set, the handler
still receives the full list of diagnostics.
Problem: ComplMatchIns highlight hard to read on light background
(after v9.1.0996)
Solution: define the highlighting group cleared, it should be configured in
colorschemes separately (glepnir)
closes: vim/vim#16414ad409876d9
Co-authored-by: glepnir <glephunter@gmail.com>
Match the '' escape sequence in literal strings. These were previously
ending the current string and starting another concatenated literal
string.
closes: vim/vim#16415695522dea3
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: ComplMatchIns may highlight wrong text
Solution: don't highlight in case of fuzzy match,
skip-highlight when not inserting anything
(glepnir)
closes: vim/vim#16404e890887b80
Problem: Assert hit related to message kind, which is reset after a
ext_messages UI is forcibly detached, so the assertion is
expectedly false. Assert hit related to message grid variables
after an ext_messages UI attaches while message grid is scrolled.
Solution: Don't check message kind assertion if no ext_messages UI is
attached. Flush message grid when first/last ext_messages UI
attaches/detaches.
Problem:
The `nvim_notify` API (note: unrelated to `vim.notify()` Lua API) was
not given any real motivation in https://github.com/neovim/neovim/pull/13843
There are, and were, idiomatic and ergonomic alternatives already.
Solution:
Deprecate `nvim_notify`.
Problem: tests: ruby tests fail with Ruby 3.4
Solution: adjust expected output for Ruby 3.4
(Yee Cheng Chin)
Vim's Ruby tests relied on explicit matching of output texts which are
fragile in design. Ruby 3.4 has changed the output slightly (using
'name' instead of `name', and also using more spaces in dictionary
printouts). Modify the Vim tests to be less fragile to such changes.
closes: vim/vim#16411ebea31e454
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: leaking finished exception
(after v9.1.0984)
Solution: use finish_exception to clean up caught exceptions
(Yee Cheng Chin)
In Vimscript, v:exception/throwpoint/stacktrace are supposed to reflect
the currently caught exception, and be popped after the exception is
finished (via endtry, finally, or a thrown exception inside catch).
Vim9script does not handle this properly, and leaks them instead. This
is clearly visible when launching GVim with menu enabled. A caught
exception inside the s:BMShow() in menu.vim would show up when querying
`v:stacktrace` even though the exception was already caught and handled.
To fix this, just use the same functionality as Vimscript by calling
`finish_exception` to properly restore the states. Note that this
assumes `current_exception` is always the same as `caught_stack` which
believe should be the case.
Added tests for this. Also fix up test_stacktrace to properly test the
stack restore behavior where we have nested exceptions in catch blocks
and to also test the vim9script functionality properly.
- Also, remove its dependency on explicitly checking a line number in
runtest.vim which is a very fragile way to write tests as any minor
change in runtest.vim (shared among all tests) would require changing
test_stacktrace.vim. We don't actually need such granularity in the
test.
closes: vim/vim#164132051af1642
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem:
Deprecated API `nvim_get_option()` doesn't validate the option name,
which leads to an assertion failure.
Solution:
Validate option name in `nvim_get_option()`.
Ref: #31894
Problem: We want to deprecate `nvim_err_write(ln)()` but there is no
obvious replacement (from Lua). Meanwhile we already have
`nvim_echo()` with an `opts` argument.
Solution: Add `err` argument to `nvim_echo()` that directly maps to
`:echoerr`.
If a "on_lines" callback changes the structure of the marktree, the
iterator (which is used for an entire window viewport) might now
point to invalid memory. Restore the iterator to the beginning of the
line in this case.
fixes#29484
Problem: filetype: TI assembly files are not recognized
Solution: inspect '*.sa' and assembly files and detect TI assembly
files, include filetype plugin and syntax script for TI
assembly files (Wu, Zhenyu)
closes: vim/vim#158274f73c07abf
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: too many strlen() calls in drawscreen.c
Solution: refactor drawscreen.c and remove calls to strlen(),
make get_keymap_str() (in screen.c) return string length
instead of TRUE/FALSE (John Marriott).
a21240b97d
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: too many strlen() calls in insexpand.c
Solution: Refactor insexpand.c and reduce number of calls to STRLEN(),
fix a warning get_next_filename_completion(), add new function
ins_compl_leader_len() (John Marriott)
closes: vim/vim#160955e6ea92b2c
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: incorrect return type doc causes luals `Annotations specify that at most 0 return value(s) are required, found 1 returned here instead.` diagnosis
Solution: correct return type doc
Problem: filetype: shaderslang files are not detected
Solution: detect '*.slang' files as shaderslang filetype,
include a filetype and syntax script (mtvare6)
Reference:
https://shader-slang.com/closes: vim/vim#16387616219f684
Co-authored-by: mtvare6 <mtvare6@proton.me>
Problem: Linking `TablineSel` to `Normal` makes it more noticeable with
`notermguicolors` but less so with `termguicolors` (compared to using
bold text in both cases).
Solution: use bold text with `termguicolors` and regular with
`notermguicolors`.
**Problem:** The treesitter `foldexpr` calls `get_parser()` for each
line in the buffer when calculating folds. This can be incredibly slow
for buffers where a parser cannot be found (because the result is not
cached), and exponentially more so when the user has many
`runtimepath`s.
**Solution:** Only fetch the parser when it is needed; that is, only
when initializing fold data for a buffer.
Co-authored-by: Jongwook Choi <wookayin@gmail.com>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: v:stacktrace has wrong type in Vim9 script.
Solution: Change the type to t_list_dict_any. Fix grammar in docs.
(zeertzjq)
closes: vim/vim#163906655bef330
Problem: Although patch 9.1.0990 fixed a real problem/inconsistency,
it also introduced new behavior that may break BWC and/or be
unexpected. Before 9.1.0990, window commands could make the
topframe smaller (without changing 'cmdheight'; quirk that is
now fixed), but did not allow extending the topframe beyond
the 'cmdheight' set by the user. After 9.1.0990, the user can
reduce the 'cmdheight' below the value they set explicitly,
through window commands, which may lead to confusion.
(aftere v9.1.0990)
Solution: Store the value explicitly set by the user and clamp the
'cmdheight' when resizing the topframe. This also applies to
dragging laststatus, which in contrast to window commands
_did_ allow reducing the 'cmdheight' to values below the one
set by the user. So with this patch there is still new
behavior, but I think in a way that is less surprising.
While at it, also fix a Coverity warning, introduced in
v9.1.0990 (Luuk van Baal)
c97e869535
Problem: open_floating_preview() may be hidden behind current window if
that is floating and has a higher zindex.
Solution: Open floating preview with zindex higher than current window.
Revert the documentation for :horizontal from commit
0c3e57b403e0e3a1fefc because :horizontal cannot be shortened to :ho
closes: vim/vim#16362fd771613b3
Co-authored-by: h-east <h.east.727@gmail.com>
after v9.1.0985
related: vim/vim#163566139766e82
Co-authored-by: h-east <h.east.727@gmail.com>
N/A patch:
vim-patch:8a27d97: runtime(doc): Capitalise the mnemonic "Zero" for the 'z' flag of search()
Problem:
`nvim -es` (and `nvim -Es`) is the recommended way to non-interactively
run commands/vimscript. But it enables shada by default, which is
usually not wanted.
Solution:
- Disable shada by default for `nvim -es/-Es`. This can be overridden by
`-i foo` if needed.
- Do NOT change the 'loadplugins' default.
- User config + packages _should_ be enabled by default, for both `nvim
-es` and `nvim -l`. Else any Lua packages you have can't be accessed
without `-u path/to/config`, which is clumsy.
- Use-cases:
```
nvim --headless "+Lazy! sync" +qa
would become: nvim -es "+Lazy! sync"
nvim --headless +PlugInstall +qall
would become: nvim -es +PlugInstall
```
- Opt-out (`--clean` or `-u NONE`) is much easier than opt-in (`-u
path/to/config`).
- User config/packages are analogous to pip packages, which are
expected when doing `python -c ...`.
related: 7c94bcd2d7
related: ddd0eb6f51
Problem:
RelWithDebInfo generates redundant flags:
Compilation: /usr/bin/cc -O2 -g -Og -g
The `CMAKE_C_FLAGS_RELWITHDEBINFO` variable is being modified in a way
that caused duplicate `-Og` and `-g` flags to be added. The resulting
flags were `-O2 -g -Og -g`.
- `-Og` (Optimize for debugging) and `-O2` (Optimize for performance)
are different optimization levels. We can't use both at once.
- The duplicate `-g` flag is redundant and no effect.
multiple -O flags has no effect for code, just redundant.
> If you use multiple -O options, with or without level numbers, the last such option is the one that is effective.
https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html
Solution:
Adjust the flags to use the more appropriate `-O2 -g`.
Compilation: /usr/bin/cc -O2 -g
BEFORE:
```
:verbose version
NVIM v0.11.0-dev-1443+ge00cd1ab40
Build type: RelWithDebInfo
LuaJIT 2.1.1734355927
Compilation: /usr/bin/cc -O2 -g -Og -g -flto -fno-fat-lto-ob
jects -Wall -Wextra -pedantic -Wno-unused-parameter -Wstrict
...
```
AFTER:
```
:verbose version
NVIM v0.11.0-dev-e00cd1ab4-dirty
Build type: RelWithDebInfo
LuaJIT 2.1.1734355927
Compilation: /usr/bin/cc -O2 -g -flto -fno-fat-lto-objects -
Wall -Wextra -pedantic -Wno-unused-parameter -Wstrict-protot
...
```
Problem:
If completeopt does not include "popup" flag, nvim__complete_set still
auto-creates a floating preview window.
Solution:
Fail if completeopt does not include the "popup" flag.
Problem: when popup preview buffer has filetype like markdown and ts
is enabled, the extmark clean and update not correct, if add the extmark
sync there has lots of duplicate codes like nvim_buf_set_lines.
Solution: use nvim_buf_set_lines api internally to set info to popup
preview buffer.
Problem: Inconsistent behavior when changing cmdheight by resizing the
topframe through wincmds and dragging laststatus. Changing
cmdheight by resizing the topframe does not trigger OptionSet.
Solution: Consolidate logic for changing the cmdheight, set the option
value to handle side-effects (Luuk van Baal)
e15cbc1af4
vim-patch:9.0.0187: command line height changes when maximizing window height
Problem: Command line height changes when maximizing window height.
Solution: Do not change the command line height. (closesvim/vim#10885)
96bde99bf8
Problem:
- `n.spawn()` is misleading because it also connects RPC, it's not just
"spawning" a process.
- It's confusing that `n.spawn()` and `n.spawn_argv()` are separate.
Solution:
- Replace `n.spawn()`/`n.spawn_argv()` with a single function `n.new_session()`.
This name aligns with the existing functions `n.set_session`/`n.get_session`.
- Note: removes direct handling of `prepend_argv`, but I doubt that was
important or intentional. If callers want to control use of `prepend_argv`
then we should add a new flag to `test.session.Opts`.
- Move `keep` to first parameter of `n.new_session()`.
- Add a `merge` flag to `test.session.Opts`
- Mark `_new_argv()` as private. Test should use clear/new_session/spawn_wait
instead.
When treesitter is enabled, by default syntax groups are not defined, but these
groups are used to identify where to skip matches in matchit and matchparen.
This patch does three things:
1. If syntax is enabled regardless of treesitter (`vim.bo.syntax='on'`):
Use original implementation.
2. If treesitter is enabled and syntax is not:
Match the syntax groups (i.e. `comment\|string`) against treesitter captures
to check for skipped groups.
3. Add an explicit treesitter syntax for marking captures to skip:
matchit uses `b:match_skip` to determine what counts as skippable
Where 's:comment\|string' uses a match of the named syntax groups against
a regex match of comment\|string, 't:comment\|string' now uses vim regex
to match against the names of the treesitter capture groups.
Problem:
Tests that need to check `nvim` CLI behavior (no RPC session) create
their own ad-hoc `system()` wrappers.
Solution:
- Use `n.spawn_wait` instead of `system()`.
- Bonus: this also improves the tests by explicitly checking for
`stdout` or `stderr`. And if a signal is raised, `ProcStream.status`
will reflect it.
Problem:
Can't use `n.clear()` to test non-RPC `nvim` invocations. So tests end
up creating ad-hoc wrappers around `system()` or `jobstart()`.
Solution:
- Introduce `n.spawn_wait()`
- TODO (followup PR): Rename `n.spawn()` and `n.spawn_wait()`.
It's misleading that `n.spawn()` returns a RPC session...
Problem:
This test causes a null pointer dereference:
local proc = n.spawn_wait('-l', 'test/functional/fixtures/startup-fail.lua')
RUN T1565 startup -l Lua Lua-error sets Nvim exitcode: 241.00 ms OK
==================== File …/build/log/asan.13763 ====================
= …/src/nvim/grid.c:389:12: runtime error: null pointer passed as argument 1, which is declared to never be null
= /usr/include/string.h:61:62: note: nonnull attribute specified here
= 0 0x55cc2d869762 in grid_line_start …/src/nvim/grid.c:389:5
= 1 0x55cc2d8717ca in grid_clear …/src/nvim/grid.c:618:5
= 2 0x55cc2dbe0f6f in msg_clr_eos_force …/src/nvim/message.c:3085:3
= 3 0x55cc2dbbbdec in msg_clr_eos …/src/nvim/message.c:3061:5
= 4 0x55cc2dbbae2c in msg_multiline …/src/nvim/message.c:281:9
= 5 0x55cc2dbba2b4 in msg_keep …/src/nvim/message.c:364:5
= 6 0x55cc2dbc4992 in emsg_multiline …/src/nvim/message.c:773:10
= 7 0x55cc2dbc5d43 in semsg_multiline …/src/nvim/message.c:824:9
= 8 0x55cc2d9c5945 in nlua_error …/src/nvim/lua/executor.c:158:5
= 9 0x55cc2d9c89fd in nlua_exec_file …/src/nvim/lua/executor.c:1862:5
= 10 0x55cc2d9f4d69 in main …/src/nvim/main.c:637:19
= 11 0x7f319b62a1c9 in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
= 12 0x7f319b62a28a in __libc_start_main csu/../csu/libc-start.c:360:3
= 13 0x55cc2ced0f64 in _start (…/build/bin/nvim+0xc48f64) (BuildId: 309c83f8d74297c89719dae9c271dd8ec23e64c3)
Cause:
The tests use `redrawdebug=invalid` by default, but `default_grid_alloc`
skips calling `grid_alloc` when not `full_screen`.
Solution:
Check for `full_screen`.
Problem: Message grid newline formatting based on `msg_col` is not
utilized with ext_messages.
Solution: Increment `msg_col` with the cell width of the chunk. Allowing
message code that uses `msg_col` to determine when to place a
newline to do so. E.g. when the message goes beyond `Columns`;
this is not necessarily where the ext_messages implementation
would want to place a newline, but it is a best guess. Message
parsing and manipulation is still possible.
Problem: filetype: 'jj' filetype is a bit imprecise
Solution: rename 'jj' filetype to 'jjdescription'
(Gregory Anders)
closes: vim/vim#1636458c44e8833
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Prompts are emitted as messages events, where cmdline events
are more appropriate. The user input is also emitted as
message events in fast context, so cannot be displayed with
vim.ui_attach().
Solution: Prompt for user input through cmdline prompts.
* Cancel watcher in the "force" case.
* Cancel watcher outside the async callback. It seems nvim doesn't wait
async jobs on quitting, leaving detached inotifywait processes.
* Clean up cancelling callbacks.
Arrow and function keys do not use CSI u with the kitty keyboard
protocol. For example, the Up arrow key uses CSI A, and the function
keys use a variety of different CSI sequences.
Until now, termkey only parsed subparams used by key events for CSI u
sequences. The result being that any key which did not use CSI u (e.g.
arrow and function keys) was being emitted twice by termkey since it was
not recognizing the separate press and release events.
This commit makes termkey also parse subparams for other key sequences
so that the release key events do not send duplicate keys.
We currently enable the OSC 52 clipboard provider by setting g:clipboard
when a list of conditions are met, one of which is that $SSH_TTY must be
set. We include this condition because often OSC 52 is not the best
clipboard provider, so if there are "local" providers available Nvim
should prefer those over OSC 52.
However, if no other providers are available, Nvim should use OSC 52
even when $SSH_TTY is not set. When a user is in an SSH session then the
checks for the other clipboard providers will still (typically) fail, so
OSC 52 continues to be enabled by default in SSH sessions.
This is marked as a breaking change because there are some cases where
OSC 52 wasn't enabled before and is now (or vice versa).
Enable key event reporting in the kitty keyboard protocol. This causes
supporting terminals to send key events for presses, repeats, and key
releases. For now we ignore release events, but eventually we will
support users mapping those.
Allows to retrieve the configuration as it will be used by `lsp.enable`
- including the parts merged from `*` and rtp.
This is useful for explicit startup control
(`vim.lsp.start(vim.lsp.config[name])`)
Closes https://github.com/neovim/neovim/issues/31640
Problem: TI linker files are not recognized
Solution: inspect '*.cmd' files and detect TI linker files
as 'lnk' filetype, include a lnk ftplugin and syntax
script (Wu, Zhenyu)
closes: vim/vim#1632039a4eb0b2c
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
vim-patch:9.1.0983: not able to get the displayed items in complete_info()
Problem: not able to get the displayed items in complete_info()
(Evgeni Chasnovski)
Solution: return the visible items via the "matches" key for
complete_info() (glepnir)
fixes: vim/vim#10007closes: vim/vim#16307d4088edae2
Problem: GUI tests sometimes fail when setting 'scroll' options
Solution: decrease the 'scroll' and 'scrolljump' option value from 20 to
15, in case the Gui window is not large enough to handle 20.
tests: decrease the scroll and scrolljump values
the gui tests sometimes fail with:
```
From test_options_all.vim:
Found errors in Test_opt_set_scroll():
Caught exception in Test_opt_set_scroll(): Vim(set):E49: Invalid scroll size: scroll=20 @ command line..script /home/runner/work/vim/vim/src/testdir/runtest.vim[617]..function RunTheTest[57]..Test_opt_set_scroll, line 7
Found errors in Test_opt_set_scrolljump():
Caught exception in Test_opt_set_scrolljump(): Vim(set):E49: Invalid scroll size: scrolljump=20 @ command line..script /home/runner/work/vim/vim/src/testdir/runtest.vim[617]..function RunTheTest[57]..Test_opt_set_scrolljump, line 9
```
closes: vim/vim#163372e1f757f7b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: autocmd to refresh folds always uses the current buffer if the
option type is local. However, the current buffer may not have a parser,
and thus the assert that checks for a parser could fail.
Solution: check if the foldinfo contains the buffer, and only refresh if
so.
Problem: filetype: sh filetype set when detecting the use of bash
Solution: when bash is detected, use 'bash' filetype instead
(Luca Saccarola)
closes: vim/vim#16309b9b762c21f
Problem: There is currently no way to check if a given path is absolute or convert a relative path to an absolute path through the Lua stdlib. `vim.fs.joinpath` does not work when the path is absolute. There is also currently no way to resolve `C:foo\bar` style paths in Windows.
Solution: Add `vim.fs.abspath`, which allows converting any path to an absolute path. This also allows checking if current path is absolute by doing `vim.fs.abspath(path) == path`. It also has support for `C:foo\bar` style paths in Windows.
If root_dir is a function it is evaluated when the client is created to
determine the root directory.
This enables dynamically determining the root directory based on e.g.
project or directory structure (example: finding a parent Cargo.toml
file that contains "[workspace]" in a Rust project).
Problem: fuzzy-matching does not prefer full match
(Maxim Kim)
Solution: add additional score for a full match
(glepnir)
fixes: vim/vim#15654closes: vim/vim#163005a04999a74
Problem: Currently, we use `switch_option_context` to temporarily switch the current option context before setting an option for a different buffer / window. This is not ideal because we already support getting and setting option values for non-current contexts in the underlying implementation.
Solution: Set option value for non-current context by passing the context directly to the lower level functions. Also introduce a new `OptCtx` struct to store option context information, this will scale much better if we add more option scopes and other context information in the future.
Problem: Currently we can only specify a buffer to use for an autocmd context through `aucmd_prepbuf()`, which finds a window that uses that buffer in the current tabpage, or creates an autocmd window. This means it's not possible to actually specify a window to use for an autocmd.
Solution: Add an `aucmd_prepbuf_win()` function which also takes a window as a parameter and uses it for the autocmd. If the window is not provided, then it behaves similarly to `aucmd_prepbuf()`
Problem:
`nvim__redraw()` doesn't clamp the lines in the `range` parameter before truncating to int. The resulting range may be empty when the original range contained buffer lines and vice versa.
E.g. for a buffer with 4 lines, these are the redrawn lines:
```lua
{ 2, 2 ^ 31 } -> none (should be { 2, 3 })
{ 2, 2 ^ 32 } -> none (should be { 2, 3 })
{ 2 ^ 32 - 1, 2 } -> { 0, 1 } (should be none)
```
Solution:
Clamp `range` values before truncating to int.
Problem: filetype: hy history files are not recognized
Solution: detect '*.hy', '.hy-history' files as hy filetype,
detect '.lips_repl_history' files are scheme filetype
(Wu, Zhenyu)
closes: vim/vim#16298a32daed559
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Similar to how there is a `GDB` environment variable to let the nvim
test instances to be run under `gdbserver` this adds a `OSV_PORT`
variable to start nvim test instances with `osv` in blocking mode to let
a debug client attach to it for debugging of `exec_lua` code blocks.
Problem: completion may crash, completion highlight wrong with preview
window (after v9.1.0954)
Solution: correctly calculate scroll offset, check for preview window
when adding extra highlighting
(glepnir)
when there have a preview window prepare_tagpreview
will change curwin to preview window and this may cause
ComplMatchIns check condition not correct. check wp is curwin
and also the type of wp is not a preview or poup info
fixes: https://github.com/vim/vim/issues/16284
closes: https://github.com/vim/vim/pull/162838d0bb6dc9f
Problem: popupmenu.c can be improved
Solution: slightly refactor the logic
(glepnir)
closes: vim/vim#16271
Replace some if blocks and combine user attr abstract to an inline
function.
89a107efd1
Co-authored-by: glepnir <glephunter@gmail.com>
vim.diagnostic.set_list() uses chistory to restore the actively selected
entry whenever necessary. This however also results in it displaying
some output in the message bar, but this output isn't useful (and can
even be distracting) when opening the quickfix window. This fixes this
by silencing the chistory command.
Problem:
Since 2a7d0ed614, build fails with glibc
version 2.28 / RHEL8 (where `termios.h` does not include unistd.h and is
therefore missing `_POSIX_VDISABLE`):
…/src/nvim/tui/termkey/termkey.c: In function 'termkey_start':
…/src/nvim/tui/termkey/termkey.c:516:31: error: '_POSIX_VDISABLE' undeclared (first use in this function)
516 | termios.c_cc[VQUIT] = _POSIX_VDISABLE;
| ^~~~~~~~~~~~~~~
…/src/nvim/tui/termkey/termkey.c:516:31: note: each undeclared identifier is reported only once for each function it appears in
Solution:
- Undo the `<termios.h>` change and mark the imports with `IWYU pragma: keep`.
Previously, `make lint` would invoke `lintcommit` which would fail if
there were fixup or other disallowed commits. This would disrupt local
development as developers would often want non-commit linting to work
early on without needing to adhere to the strict commit rules.
Regression from 2a7d0ed614, which removed
header that is only needed if wasmtime support is enabled. Prevent this
from happening again by wrapping the include in a `HAVE_WASMTIME` check.
Problem:
The :has() method of the vim.version.range() result is not documented
though it's mentioned in examples.
Solution:
Mention it in the range() result doc.
Contribute the core of my vim-graphql project (ftplugin, indent, syntax)
to the Vim project. This replaces the basic ftplugin support that was
already in the runtime with a more complete set of filetype settings. I
can assume maintainership for all of these files.
I'll continue to maintain the higher-level embedded filetype support
separately (in vim-graphql) for now, because it's fairly complex, but we
can consider integrating that code directly into vim later.
runtime files use the MIT license.
closes: vim/vim#162734ce1cb5bf1
Co-authored-by: Jon Parise <jon@indelible.org>
Problem: filetype: APKBUILD files not correctly detected
Solution: detect 'APKBUILD' files as apkbuild filetype,
include a apkbuild syntax script (which basically
just sources the sh.vim syntax file)
(Hugo Osvaldo Barrera)
Vim plugins (e.g.: ALE, nvim-lspconfig, etc) rely on filetype to
determine which integrations/helpers are applicable. They expect
filetype=apkbuild for APKBUILD files.
On the other hand, plugins also enable bash-specific linters and
functionality when filetype=bash, but APKBUILD files are POSIX sh, not
bash, so these often provide bogus results.
Change the filetype for APKBUILD to a 'apkbuild', so that tools and
ftplugin can properly target these files. This filetype will use the
existing `sh` syntax rules, since these are applicable for them.
7cb24917a1
Co-authored-by: Hugo Osvaldo Barrera' via vim_dev <vim_dev@googlegroups.com>
- Typo/bug in msg_outtrans_long passing string length as "hist" argument.
- Avoid truncating message in msg_outtrans_long with ext_messages (followup to
1097d239c3).
- Remove `_hl` from `msg_keep`, `smsg_keep` as there is no non-`_hl` variant.
- `msg_printf_hl` is removed (identical to `smsg` except it sets
`msg_scroll = true`, seemingly as a caveat to force a more prompt in
cmdline mode). Move this logic to the only the only place this was
used in ex_getln.c.
Problem: Unable to tell what highlight the prompt part of a
cmdline_show event should have, and whether cmdline_hide was
emitted after aborting.
Solution: Add additional arguments hl_id to cmdline_show, and abort to
cmdline_hide.
It's probably not worth adding the C test files to regular formatting as
they're pretty much never touched, but ensuring the files are formatted
according to our standards and getting rid of warnings is a cheap
one-time fix.
Problem: LSP configs on the runtimepath must have the same name as the
LSP server and must also explicitly set the name in vim.lsp.config. This
is redundant and creates a footgun where a user may accidentally use the
wrong name when assigning to the vim.lsp.config table.
Solution: Return a table from lsp/ runtimepath files instead
CID 516419: Integer handling issues (INTEGER_OVERFLOW)
/src/nvim/message.c: 2242 in msg_puts_display()
2236 }
2237 // Concat pieces with the same highlight
2238 size_t len = maxlen < 0 ? strlen(str) : strnlen(str, (size_t)maxlen);
2239 ga_concat_len(&msg_ext_last_chunk, str, len);
2240 msg_ext_cur_len += len;
2241 // When message ends in newline, reset variables used to format message: msg_advance().
>>> CID 516419: Integer handling issues (INTEGER_OVERFLOW)
>>> Expression "len - 1UL", which is equal to 18446744073709551615, where "len" is known to be equal to 0, underflows the type that receives it, an unsigned integer 64 bits wide.
2242 if (str[len - 1] == '\n') {
2243 msg_ext_cur_len = 0;
2244 msg_col = 0;
2245 }
2246 return;
2247 }
The maximum signed value on 32-bit systems is 2 ^ 31 - 1. When using 2 ^ 31 for
the default timeout, the value would overflow on such systems resulting in
a negative value, which caused a stack trace when calling wait() without
a timeout.
Problem:
`termopen` has long been a superficial wrapper around `jobstart`, and
has no real purpose. Also, `vim.system` and `nvim_open_term` presumably
will replace all features of `jobstart` and `termopen`, so centralizing
the logic will help with that.
Solution:
- Introduce `eval/deprecated.c`, where all deprecated eval funcs will live.
- Introduce "term" flag of `jobstart`.
- Deprecate `termopen`.
Also avoid going down message callstack with empty message, and remove expected grid for some tests where it did not change, and we are just testing for expected messages.
- Replace all uses of vim.regex with simpler Lua patterns.
- Replace all uses of vim.fn.substitute with string.gsub.
- Rework error handling so expected errors are passed back via a return.
- These get routed up an passed to `vim.notify()`
- Any other errors will cause a stack trace.
- Reworked the module initialization of `localfile_arg`
- Updated all type annotations.
- Refactored CLI completion by introduction a parse_cmdline()
function.
- Simplified `show_toc()`
- Refactor highlighting
- Inline some functions
- Fix completion on MacOS 13 and earlier.
- Prefer `manpath -q` over `man -w`
- Make completion more efficient by avoiding vim.fn.sort and vim.fn.uniq
- Reimplement using a single loop
Problem:
Language server version information missing from `:checkhealth vim.lsp`.
Solution:
Store `InitializeResult.serverInfo.version` from the `initialize`
response and display for each client in `:checkhealth vim.lsp`.
Problem: ComplMatchIns doesn't work after multibyte chars
(after v9.1.0936)
Solution: Use (ptr - line) instead of wlv.col (zeertzjq).
closes: vim/vim#16233f4ccada5c3
Problem: cannot highlight completed text
Solution: (optionally) highlight auto-completed text using the
ComplMatchIns highlight group (glepnir)
closes: vim/vim#161736a38aff218
Co-authored-by: glepnir <glephunter@gmail.com>
When a terminal application running inside the terminal emulator sets
the cursor shape or blink status of the cursor, update the cursor in the
parent terminal to match.
This removes the "virtual cursor" that has been in use by the terminal
emulator since the beginning. The original rationale for using the
virtual cursor was to avoid having to support additional UI methods to
change the cursor color for other (non-TUI) UIs, instead relying on the
TermCursor and TermCursorNC highlight groups.
The TermCursor highlight group is now used in the default 'guicursor'
value, which has a new entry for Terminal mode. However, the
TermCursorNC highlight group is no longer supported: since terminal
windows now use the real cursor, when the window is not focused there is
no cursor displayed in the window at all, so there is nothing to
highlight. Users can still use the StatusLineTermNC highlight group to
differentiate non-focused terminal windows.
BREAKING CHANGE: The TermCursorNC highlight group is no longer supported.
Problem: Two separate try/end wrappers, that only marginally differ by
restoring a few variables. Wrappers that don't restore
previous state are dangerous to use in "api-fast" functions.
Solution: Remove wrappers that don't restore the previous state.
Always use TRY_WRAP.
Problem: hard to view an existing buffer in the preview window
Solution: add the :pbuffer command (Yinzuo Jiang)
Similar as `:pedit` and `:buffer` command. `:pbuffer` edits buffer [N]
from the buffer list in the preview window.
`:pbuffer` can also open special buffer, for example terminal buffer.
closes: vim/vim#16222a2a2fe841e
Cherry-pick Test_popup_and_previewwindow_dump() changes from patch
9.0.0625.
Cherry-pick Run_noroom_for_newwindow_test() changes from patches
8.2.0432 and 9.0.0363.
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: exclusive selection not respected when re-selecting block mode
(Matt Ellis)
Solution: advance selection by another character when using
selection=exclusive and visual block mode
fixes: vim/vim#16202closes: vim/vim#16219bb95589473
Co-authored-by: Christian Brabandt <cb@256bit.org>
1) move the section at :h inclusive-motion-selection-exclusive a few
lines below, so that it doesn't live in between the 2 exceptions.
2) remove the tag :h :!-range. It's not accurate (because it is actually
a filter) and this command is already described at :h :range!
0a4e57f44a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
- API functions using `try_start` directly, do not surface the
underlying error message, and instead show generic messages.
- Error-handling code is duplicated in the API impl.
- Failure modes are not tested.
Solution:
- Use `TRY_WRAP`.
- Add tests.
Problem:
Regression from de794f2d24: `vim.diagnostic.setqflist{open=true}` attempts to
open the location list instead of the diagnostics quickfix list if it didn't
exist before. This is because we are using `qf_id` to decide which to open, but
`qf_id=nil` when there is no existing diagnostics quickfix list with a given
title ("Diagnostics" by default).
Solution:
- Revert to using `loclist` to decide which to open.
- Add tests.
Problem:
- API functions using `try_start` directly instead of `TRY_WRAP`, do not
surface the underlying error message, and instead show generic things
like "Failed to set buffer".
- Error handling code is duplicated in the API impl, instead of
delegating to the vim buffer/window handling logic.
Solution:
- Use `TRY_WRAP`.
"wininfo" is going to be my next victim. The main problem with wininfo
is that it is "all or nothing", i e either all state about a buffer in a
window is considered valid or none of it is. This needs to be fixed to
address some long running grievances.
For now this is just a warmup: refactor it from a linked list to a
vector.
## Problem
With 'winfixbuf' enabled, `nvim_win_set_buf` and `nvim_set_current_buf` fail
even if targeting the already-current buffer.
vim.wo.winfixbuf = true
vim.api.nvim_win_set_buf(0, 0)
vim.api.nvim_set_current_buf(0)
Solution:
Check for this condition.
Problem: style issues in insexpand.c
Solution: add braces, use ternary operator to improve style
(glepnir)
closes: vim/vim#162106e19993991
vim-patch:9.1.0922: wrong MIN macro in popupmenu.c
vim-patch:9.1.0923: too many strlen() calls in filepath.c
vim-patch:9.1.0924: patch 9.1.0923 causes issues
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
Since e049c6e4c0, most statusline-like UI elements can combine
highlight attrs, except for sign/statuscolumn.
Solution:
Implement for sign/statuscolumn.
Problem:
An LSP configuration that creates client with no root_dir or
workspace_folders can result in vim.lsp.enable attaching to it multiple
times.
Solution:
When checking existing clients, reuse a client if it wasn't initially
configured have any workspace_folders. This more closely matches the
behaviour we had prior to d9235ef
Problem: wrong MIN macro in popupmenu.c (after v9.1.0921)
(zeertzjq)
Solution: change it to MAX()
618c4d36ca
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: popupmenu logic is a bit convoluted
Solution: slightly refactor logic and use MIN/MAX() macros to simplify
(glepnir)
Define the MAX/MIN macros. Since we support some older platforms, C
compilers may not be as smart. This helps reduce unnecessary if
statements and redundant ternary expressions. Pre-calculate some
expressions by defining variables. Remove unnecessary parentheses.
Adjust certain lines to avoid exceeding 80 columns.
closes: vim/vim#16205c942f84aad
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: filetype: some assembler are files not recognized
Solution: detect '*.nasm' files as nasm filetype and '*.masm' as masm
filetype (Wu, Zhenyu)
closes: vim/vim#16194d66d68763d
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Previously, when updating the quickfix diagnostics list, we'd update it,
and then open the quickfix buffer, but there was no guarantee that the
quickfix buffer would be displaying the quickfix diagnostics list (it
could very possibly be displaying some other quickfix list!).
This fixes things so we first select the quickfix list before opening the
quickfix buffer. If `open` is not specified, the behavior is the same as
before: we update the diagnostics quickfix list, but do not navigate to
it.
fixes https://github.com/neovim/neovim/issues/31540
**Problem:**
The brackets in the RFC2732 regular expression are currently unescaped,
causing them to be misinterpreted as special characters denoting
character groups rather than as literal characters.
**Solution:**
Escape the brackets.
Fix#31270
Problem: Float preview window still exist when back at original.
Or no info item is selected.
Solution: if selected is -1 or no info is selected, if float preview
window exist close it first.
**Problem:** Currently, it is difficult to get node(s)-level metadata
for a capture returned by `get_captures_at_pos()`. This is because it is
stored in `metadata[id]` and we do not have access to the value of `id`,
so to get this value we have to iterate over the keys of `metadata`. See
[this commit](d636229300 (diff-8bd4742121c2f359d0345f3c6c253a58220f1a28670cc4e1c957992232059a6cR16)).
Things would be much simpler if we were given the `id` of the capture so
we could use it to just index `metadata` directly.
**Solution:** Include `id` in the data returned by
`get_captures_at_pos()`
Design goals/requirements:
- Default configuration of a server can be distributed across multiple sources.
- And via RTP discovery.
- Default configuration can be specified for all servers.
- Configuration _can_ be project specific.
Solution:
- Two new API's:
- `vim.lsp.config(name, cfg)`:
- Used to define default configurations for servers of name.
- Can be used like a table or called as a function.
- Use `vim.lsp.confg('*', cfg)` to specify default config for all
servers.
- `vim.lsp.enable(name)`
- Used to enable servers of name. Uses configuration defined
via `vim.lsp.config()`.
- Problem: cannot replace the initial bufwrite message (from `filemess`) by the final one (`"test.lua" [New] 0L, 0B written`), when using `vim.ui_attach`.
- Solution: add kind to both messages.
Problem: various vartabstop and shiftround bugs when shifting lines
Solution: Fix the bugs, add new tests for shifting lines in various ways
(Gary Johnson)
fixes: vim/vim#14891closes: vim/vim#16193eed63f96d2
Co-authored-by: Gary Johnson <garyjohn@spocom.com>
Problem: INT overflow logic can be simplified
Solution: introduce trim_to_int() function
closes: vim/vim#135562b0882fa65
vim-patch:9.0.2138: Overflow logic requires long long
Problem: Overflow logic requires long long
Solution: Define vimlong_T data type to make life easier
for porters
closes: vim/vim#13598fda700cb04
Cherry-pick ops.c change from patch 9.1.0608.
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: [security]: prevent overflow in indenting
Solution: use long long and remove cast to (int)
The shiftwidth option values are defined as being long. However, when
calculating the actual amount of indent, we cast down to (int), which
may cause the shiftwidth value to become negative and later it may even
cause Vim to try to allocate a huge amount of memory.
We already use long and long long variable types to calculate the indent
(and detect possible overflows), so the cast to (int) seems superfluous
and can be safely removed. So let's just remove the (int) cast and
calculate the indent using longs.
Additionally, the 'shiftwidth' option value is also used when determining
the actual 'cino' options. There it can again cause another overflow, so
make sure it is safe in parse_cino() as well.
fixes: vim/vim#13554closes: vim/vim#135553770574e4a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity warns for another overflow in shift_line()
Solution: Test for INT_MAX after the if condition, cast integer values
to (long long) before multiplying.
22a97fc241
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in shift_line
Solution: allow a max indent of INT_MAX
[security]: overflow in shift_line
When shifting lines in operator pending mode and using a very large
value, we may overflow the size of integer. Fix this by using a long
variable, testing if the result would be larger than INT_MAX and if so,
indent by INT_MAX value.
Special case: We cannot use long here, since on 32bit architectures (or
on Windows?), it typically cannot take larger values than a plain int,
so we have to use long long count, decide whether the resulting
multiplication of the shiftwidth value * amount is larger than INT_MAX
and if so, we will store INT_MAX as possible larges value in the long
long count variable.
Then we can safely cast it back to int when calling the functions to set
the indent (set_indent() or change_indent()). So this should be safe.
Add a test that when using a huge value in operator pending mode for
shifting, we will shift by INT_MAX
closes: vim/vim#135356bf131888a
Skip the test for now, as it takes too long and requires other fixes.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: no error check for neg values for 'messagesopt'
(after v9.1.0908)
Solution: add additional error checks and tests (h-east)
closes: vim/vim#1618765be834c30
Nvim's getdigits() checks for overflow, so the code change isn't needed.
Co-authored-by: h-east <h.east.727@gmail.com>
Since Vietnamese keymaps in Vim is quite differences from the
corresponding input methods, let's document the Vietnamese specifics in
vietnames.txt
related: vim/vim#16144189e24bb14
Problem: Variable name for 'messagesopt' doesn't match short name
(after v9.1.0908)
Solution: Change p_meo to p_mopt. Add more details to docs.
closes: vim/vim#161828cc43daee1
Problem: 'messagesopt' does not check max wait time
(after v9.1.0908)
Solution: Check for max wait value
(Shougo Matsushita)
closes: vim/vim#16183d9e9f89e0f
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: It is not obvious if a treesitter highlight priority shown in
`:Inspect` is higher or lower than the default.
Solution: Also print default priority (`vim.hl.priorities.treesitter`).
Add padding for better readability.
Problem: :sleep! not hiding the cursor is an arbitrary difference from
Vim without obvious justification, and Vim's behavior isn't
easily achievable in Nvim.
Solution: Make :sleep! hide the cursor while sleeping.
Ref:
6a01b3fcc3b5c0ade437
Problem:
char-wise folding for `#trim!` ranges are improperly calculated for nodes that
end at column 0, due to the way `get_node_text` works.
Solution:
Add the blank line that `get_node_text` removes for for nodes ending at column
0. Also properly set column positions when performing linewise trims.
Problem:
Diagnostics and inlay hints can be expensive to calculate, and we
shouldn't stack them as this can cause noticeable lag.
Solution:
Check for duplicate inflight requests and cancel them before issuing a new one.
This ensures that only the latest request is processed, improving
performance and preventing potential conflicts.
Problem: `:Inspect` does not show priority for treesitter highlights,
leading to confusion why sometimes earlier highlights override later
highlights.
Solution: Also print priority metadata if set.
Problem:
vim.json.encode escapes every slash in string values (for example in
file paths), and is not optional. Use-case is for preventing HTML
injections (eg. injecting `</script>` closing tag); in the context of
Nvim this is rarely useful.
Solution:
- Add a `escape_slash` flag to `vim.json.encode`.
- Defaults to `false`. (This is a "breaking" change, but more like
a bug fix.)
This commit also implements more generic trimming, acting on all
whitespace (charwise) rather than just empty lines.
It will unblock
https://github.com/nvim-treesitter/nvim-treesitter/pull/3442 and allow
for properly concealing markdown bullet markers regardless of indent
width, e.g.
Problem: Paragraph below bulleted list was joined to last list item instead of dropping below as expected. Same with "Notes:" paragraph below it.
Solution: Added necessary newlines.
Problem: When completion leader changes, text that might be reinserted
immediately after is deleted. This unnecessarily affects
extmarks. #31387 restored the original extmarks but that
prevents end_right_gravity marks from growing.
Solution: Avoid deleting leader text that will be reinserted.
Problem: In an autocommand Lua callback whether `args.file` is expanded
depends on whether `expand('<afile>')` has been called.
Solution: Always use the unexpanded file name for `args.file`.
Related to #31306 and vim/vim#16106. This doesn't provide `sfname`, but
at least makes `args.file` have a consistent value.
Problem: Marks that are properly restored by the splice associated with
an undo edit, are unnecessarily pushed to the undo header. This
results in incorrect mark tracking in the "copy_only"
save/restore completion path.
Solution: Avoid pushing left gravity marks at the beginning of the range,
and right gravity marks at the end of the range to the undo
header.
The old code would always update `_qf_id` with the current quickfix,
even if you're currently looking at a completely different,
non-diagnostics quickfix list. This completely defeats the intent of
<https://github.com/neovim/neovim/pull/30868>, whoops!
Problem: potential overflow in spell_soundfold_wsal()
Solution: Protect wres from buffer overflow, by checking the
length (Zdenek Dohnal)
Error: OVERRUN (CWE-119):
vim91/src/spell.c:3819: cond_const: Checking "reslen < 254" implies that
"reslen" is 254 on the false branch.
vim91/src/spell.c:3833: incr: Incrementing "reslen". The value of "reslen"
is now 255.
vim91/src/spell.c:3792: overrun-local: Overrunning array "wres" of 254
4-byte elements at element index 254 (byte offset 1019) using index
"reslen - 1" (which evaluates to 254).
3789| {
3790| // rule with '<' is used
3791|-> if (reslen > 0 && ws != NULL && *ws != NUL
3792| && (wres[reslen - 1] == c
3793| || wres[reslen - 1] == *ws))
Error: OVERRUN (CWE-119):
vim91/src/spell.c:3819: cond_const: Checking "reslen < 254" implies that
"reslen" is 254 on the false branch.
vim91/src/spell.c:3833: overrun-local: Overrunning array "wres" of 254
4-byte elements at element index 254 (byte offset 1019) using index
"reslen++" (which evaluates to 254).
3831| {
3832| if (c != NUL)
3833|-> wres[reslen++] = c;
3834| mch_memmove(word, word + i + 1,
3835| sizeof(int) * (wordlen -
(i + 1) + 1));
related: vim/vim#1616339a94d2048
Co-authored-by: Zdenek Dohnal <zdohnal@redhat.com>
Problem: Missing information in CompleteDone event
Solution: add complete_word and complete_type to v:event dict
(glepnir)
closes: vim/vim#161531c5a120a70
1. Use the new "u" action to update the quickfix list so we don't lose
our position in the quickfix list when updating it.
2. Rather than creating a new quickfix list each time, update the
exiting one if we've already created one.
Problem: filetype: Conda configuration files are not recognized
Solution: detect '.condarc' and 'condarc' files as yaml filetype.
(zeertzjq)
closes: vim/vim#16162876de275cb
In order to run the marktree unit test in release mode, the test functions need to be available even when NDEBUG is defined.
Keep the body of marktree_check a nop during release builds, which limits the usefulness of the testing, but at least lets the tests run.
In release builds, the Compilation: line is omitted so the build is reproducible. Since the "fall-back for $VIM" line is always present, check for that instead.
Tests should not rely on being run inside a git clone, so the Linux
builds cover this use case. The macOS builds will continue running with
the .git directory so there's still unix-ish coverage within a git
clone.
This ensures that no tests fail due to differences between release and debug builds.
The release build-type check is now unnecessary, too, so remove it.
In order to run unittests with a release build, we need the test
functions to be accessible when NDEBUG is defined. Moving the functions
into the test fixture ensures they are available and only available for
use by the unit tests.
Using the "supports_method" function with a client capability inside of
an LspAttach autocommand is the preferred method to do this, so we
should be showing users how to do it.
Problem:
- nvim_subscribe, nvim_unsubscribe were deprecated in
aec4938a21 but this wasn't set in the
API metadata.
- The function annotations
```
FUNC_API_SINCE(1) FUNC_API_REMOTE_ONLY FUNC_API_DEPRECATED_SINCE(13)
```
cause this test to fail:
```
RUN T3 api metadata functions are compatible with old metadata or have new level: 3.00 ms ERR
test/functional/api/version_spec.lua:135: function vim_subscribe was removed but exists in level 0 which nvim should be compatible with
stack traceback:
test/functional/api/version_spec.lua:135: in function <test/functional/api/version_spec.lua:128>
```
Solution:
- Set the API metadata.
- Rearrange the annotations so that FUNC_API_DEPRECATED_SINCE is 2nd:
```
FUNC_API_SINCE(1) FUNC_API_DEPRECATED_SINCE(13) FUNC_API_REMOTE_ONLY
```
In particular, make the distinction and interaction between "noinsert"
and "noselect" clearer as it was very confusing before.
closes: vim/vim#16148768728b487
Co-authored-by: dundargoc <gocdundar@gmail.com>
Problem: default for 'backspace' can be set in C code
Solution: promote the default for 'backspace' from defaults.vim to the C
code (Luca Saccarola)
closes: vim/vim#16143959ef61430
N/A patches:
vim-patch:9.1.0895: default history value is too small
vim-patch:075aeea: runtime(doc): document changed default value for 'history'
Co-authored-by: Luca Saccarola <github.e41mv@aleeas.com>
Problem: runtime(compiler): pytest compiler not included
Solution: include pytest compiler, update the compiler completion test
(Konfekt)
closes: vim/vim#161303c2596a9e9
Co-authored-by: Konfekt <Konfekt@users.noreply.github.com>
Problem: completion list wrong after v9.1.0891
Solution: update compl_mach_array after leader change
(glepnir)
compl_shown_match update not correct after refactoring in v9.1.0891
Unfortunately, this regressed what item is selected after leader change.
So generate compl_match_array before updating compl_shown_match range,
and split generate compl_match_array into range match_head
fixes: https://github.com/vim/vim/issues/16128
closes: https://github.com/vim/vim/pull/16129a49c077a88
Problem: building the completion list array is inefficient
Solution: refactor and improve ins_compl_build_pum() func
(glepnir)
current time complexity is O(n^2). I guess garray is not used here to save memory and avoid efficiency
is caused by heap memory allocation. A simple way is to add an extra pointer as a single linked list
to store the matching compl_T, and traverse this single linked list to generate compl_match_array.
The time complexity is O(n x m). The worst case is m=n, but we can still get a little improvement.
Because the if condition does not need to be run at one time. This should be a good solution for now.
Later we may be able to complete it in O(lgn) time. But this requires more reconstruction. So this is
the first step.
closes: #1612580b662009c
compact formatter is no longer distributed with eslint, so:
- switch to '--format stylish' in makeprg
- update 'errorformat' for the 'stylish' format output
fixes: vim/vim#16126closes: vim/vim#16137dd21c89626
Co-authored-by: Romain Lafourcade <romainlafourcade@gmail.com>
Problem:
gen_declarations.lua is complex and has duplicate logic with
c_grammar.lua
Solution:
Move all lpeg logic to c_grammar.lua and refactor gen_declarations.lua.
* refactor(shared): extract `vim._list_insert` and `vim._list_remove`
* feat(lsp): add `vim.lsp.foldexpr()`
* docs(lsp): add a todo for state management
* feat(lsp): add `vim.lsp.folding_range.foldclose()`
* feat(lsp): schedule `foldclose()` if the buffer is not up-to-date
* feat(lsp): add `vim.lsp.foldtext()`
* feat(lsp): support multiple folding range providers
* refactor(lsp): expose all folding related functions under `vim.lsp.*`
* perf(lsp): add `lsp.MultiHandler` for do `foldupdate()` only once
Problem: the max value of 'cmdheight' is limited by other tabpages
Solution: Limit the maximum value of 'cmdheight' to the current tabpage only.
(Milly)
The Help says that cmdheight is local to the tab page, but says nothing
about the maximum value depending on the state of all tab pages. Users
may wonder why they can't increase cmdheight when there are still rows
available on the current tab page. This PR changes the behavior of
cmdheight so that its maximum value depends only on the state of the
current tab page.
Also, since magic numbers were embedded in various places with the
minimum value of cmdheight being 1, we defined a constant to make it
easier to understand.
closes: vim/vim#161312cddf0e85a
Cherry-pick Test_cmdheight_not_changed() from patch 9.0.0187.
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: 'fileencodings' default value should depend on 'encoding'. (Gary
Johnson)
Solution: When 'encoding' is "utf-8" use a different default value for
'fileencodings'.
5ffefbb35a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No test for what the spotbug compiler parses
(after commit: 65311c6f472de67b368)
Solution: Test &makeprg for the SpotBugs compiler plugin
(Aliaksei Budavei)
closes: vim/vim#1609660ddb1a140
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
**Problem:** The `context` parameter for `references()` is just typed as
a table, which is unhelpful.
**Solution:** Properly type it as an `lsp.ReferenceContext`!
Problem: ins_compl_add() has too many args
Solution: refactor it and use an int array instead of 2 separate int
args (glepnir)
closes: vim/vim#160625c66e23c62
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: %! item not allowed for 'rulerformat'
(yatinlala)
Solution: also allow to use %! for rulerformat option
(Yegappan Lakshmanan)
fixes: vim/vim#16091closes: vim/vim#16118ac023e8baa
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: The warning message is the same in different functions.
It is not convenient to locate the specific function name
Solution: add function name in warning message
Enabling private DEC mode 2031 tells the terminal to notify Nvim
whenever the OS theme changes (i.e. light mode to dark mode or vice
versa) or the terminal emulator's palette changes. When we receive one
of these notifications we query the terminal color's background color
again to see if it has changed and update the value of 'background' if
it has.
We only do this though if the user has not explicitly set the value of
'bg' themselves. The help text is updated slightly to hint to users that
they probably shouldn't set this value: on modern terminal emulators
Nvim is able to completely determine this automatically.
Problem: Possible unnecessary redraw after adding/deleting lines.
Solution: Check b_mod_set before using b_mod_xlines to avoid using stale
b_mod_xlines value (zeertzjq).
closes: vim/vim#161249f25a3a237
Problem:
`vim.loader.disable` does not conform to `:help dev-name-common` and
`:help dev-patterns`.
Solution:
- Add `enable` parameter to `vim.loader.enable`
- Remove `vim.loader.disable`
- Note the change in `:help news-breaking-dev` (HEAD changes).
- This is not a breaking change (except to "HEAD") because
`vim.loader` is marked "experimental".
previous: 26765e8461
Problem:
The default unimpaired mappings display an empty line after the
command's output. This results (with default configuration) in the
`Press ENTER or type command to continue` prompt to be displayed, like
so:
```
(2 of 16): item2
Press ENTER or type command to continue
```
Solution:
The cause is that we're checking the second return value from
`pcall(vim.api.nvim_cmd, opts, {})` to determine whether the call was
successful. `nvim_cmd` returns an empty string on success, so this value
is an empty string in the successful path which we then display.
The fix is simple: check the first return value instead which is the
"status code" of the call.
Problem:
LSP spec uses the term "position encoding" where we say "offset encoding".
Solution:
- Rename it everywhere except `vim.lsp.Client.offset_encoding` (which would be breaking).
- Mention "position encoding" in the documentation for `vim.lsp.Client.offset_encoding`.
Problem: Hit double grid_line_start() assert when redrawing from
ext_messages msg_ruler event.
Solution: Do not start() batched grid calls when win_redr_ruler() will not
puts() anything.
Problem: The name `scope` is often used to refer to option flags because
`OPT_LOCAL` and `OPT_GLOBAL` are often used to determine the option
scope. This leads to the name `req_scope` being used for actual option
scopes instead.
Solution: Since the end-goal is to remove `OPT_LOCAL` and `OPT_GLOBAL`
entirely and replace them with `OptScope`, rename `OptScope` variables
to `scope` and the old scope flag variables to `opt_flags`.
Problem:
The default invocation would install the non-ucrt gcc package, the build would
fail now that UCRT is not supported. #22534
Solution:
Mention mingw-w64-ucrt pacman package instead.
Problem: floaing preview window can be closed by some
ex commands like `only` `fclose` which will not clean the bufvar
Solution: use WinClosed event with floating_winnr for clean
bufnr, and add test cases for vim.lsp.util.open_floating_preview
Problem: Option metadata like list of valid values for an option and
option flags are not listed in the `options.lua` file and are instead
manually defined in C, which means option metadata is split between
several places.
Solution: Put metadata such as list of valid values for an option and
option flags in `options.lua`, and autogenerate the corresponding C
variables and enums.
Supersedes #28659
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
`validate_option_value_args()` returns `OK` even if option name is
invalid or if option doesn't have the supported scope, which leads to
Neovim still trying to erroneously get/set the option in those cases,
which can lead to an assertion failure when `option_has_scope()` is
invoked. This issue miraculously doesn't exist in release builds since
the assertion is skipped and `(get/set)_option_value_for` returns if
there is an error set, but that is not the intended location for that
error to be caught.
Solution:
Make `validate_option_value_args()` return `FAIL` if there is an error
set, which causes the API option functions to return early instead of
trying to get/set an invalid option.
The newer UCRT runtime has native support for UTF-8, including forcing
it as the active codepage even before `main()` is called. This means
the c runtime will properly convert windows WCHAR:s into UTF-8 bytes,
as early as the argv/argc params to `main()` . Whereas MSVCRT does not
support this reliably and required us to use `wmain()`.
Only MSVC supports using manifest files directly as source files.
The solution for other Windows toolchains is to use a .rc file.
By making it a separate module, the embedded Nvim session can require
this module directly instead of setup code sending over the module via
RPC.
Also make exec_lua wrap _G.print so messages can be seen
in the test output immediately as the exec_lua returns.
Problem: 'wildmenu' not enabled by default in nocp mode
Solution: promote the default Vim value to true, it has been enabled
in defaults.vim anyhow, so remove it there (Luca Saccarola)
closes: vim/vim#16055437bc13ea1
Co-authored-by: Luca Saccarola <github.e41mv@aleeas.com>
Problem:
Since [version 3.17](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocuments),
LSP supports specifying the position encoding (aka offset encoding) supported by
the client through `positionEncoding`. Since #31209, Nvim fully supports
`utf-8`, `utf-16`, and `utf-32` encodings.
Previously, nvim assumed all clients for a buffer had the same
`offset_encoding`, so:
* Nvim provides `vim.lsp._get_offset_encoding()` to get `offset_encoding`, but
this function is incorrect because `offset_encoding` is per-client, not
per-buffer.
* Based on the strategy of `vim.lsp._get_offset_encoding()`,
`vim.lsp.util.make_position_params()`, `vim.lsp.util.make_range_params()`, and
`vim.lsp.util.make_given_range_params()` do not require the caller to pass
`offset_encoding`, which is invalid.
* https://github.com/neovim/neovim/issues/25272
Solution:
* Mark `vim.lsp._get_offset_encoding()` as `@deprecated`.
* Change the type annotations of `vim.lsp.util.make_position_params()`,
`vim.lsp.util.make_range_params()`, `vim.lsp.util.make_given_range_params()`
to require the `offset_encoding` param.
Problem: filetype: openCL files are not recognized
Solution: detect '*.cl' files as opencl or lisp filetype,
include a opencl syntax and filetype plugin (Wu, Zhenyu)
closes: vim/vim#15825e2c27ca8ef
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: karel files are not detected
Solution: detect '*.kl' files as karel filetype,
include syntax and filetype plugin
(Kirill Morozov)
closes: vim/vim#16075fdac54d7bb
Co-authored-by: Kirill Morozov <kirill@robotix.pro>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Problem: too many strlen() calls in eval.c
Solution: Refactor eval.c to remove calls to STRLEN()
(John Marriott)
closes: vim/vim#16066bd4614f43d
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem:
Capability register logic is spread across 3 files.
Solution:
- Consolidate (and simplify) logic into the client.
- Teach client.supports_method about resolve methods
Problem: Not possible to only set a "redraw later" type with
nvim__redraw, which seems to be desired for the
treesitter highlighter.
Solution: Do not update the screen when "flush" is explicitly set to
false and only redraw later types are present. In that case,
do not call ui_flush() either.
Problem:
'listchars' (in particular multispace) breaks visual heading due to
`Whitespace` highlight group.
Solution:
Disable 'list' (and thus all listchars) by default for `checkhealth`
files.
Fixes#31145
**Problem:** Despite the LSP providing the option for language servers
to specify a range with a hover response (for highlighting), Neovim does
not give the option to highlight this range.
**Solution:** Add an option to `buf.hover()` which causes this range to
be highlighted.
Co-authored-by: Mathias Fußenegger <mfussenegger@users.noreply.github.com>
Problem: nvim__redraw's "range" marks a buffer range for redraw, and subsequently
flushes the UI without updating the windows containing that buffer.
Solution: Implicitly update the screen, unless specified otherwise.
Only update the screen with the last call of the treesitter
on_changedtree() callback.
Problem: Separate message emitted for each newline present in Lua
print() arguments.
Solution: Make msg_multiline() handle NUL bytes. Refactor print() to use
msg_multiline(). Refactor vim.print() to use print().
Problem: Treesitter highlighter implements an on_bytes callback that
just re-marks a buffer range for redraw. The edit that
prompted the callback will already have done that.
Solution: Remove redundant on_bytes callback from the treesitter
highlighter module.
Problem: Documentation for "hl_group" in nvim_buf_set_extmark() is
unclear. "hl_group" in nvim_echo() does not accept
highlight group id.
Solution: Move documentation for highlight group name/id to first
mention of hl_group. Update nvim_echo() to accept highlight
group id.
Problem: Floating windows with focusable set to false can reasonably be
expected to be UI elements but are listed in some outputs that
should contain only regular windows.
Solution: Hide unfocusable floating windows from the default tabline and
:tabs.
Problem:
The way option scopes currently work is inflexible and does not allow for nested
option scopes or easily finding the value of an option at any arbitrary scope
without having to do long handwritten switch-case statements like in
`get_varp()`. `.indir` is also confusing and redundant since option indices for
each scope can be autogenerated.
Solution:
Expand option scopes in such a way that an option can support any amount of
scopes using a set of scope flags, similarly to how it's already done for option
types. Also make options contain information about its index at each scope it
supports. This allows for massively simplifying `get_varp()` and
`get_varp_scope()` in the future by just using a struct for options at each
scope. This would be done by creating a table that stores the offset of an
option's variable at a scope by using the option's index at that scope as a key.
This PR also autogenerates enums for option indices at each scope to remove the
need for `.indir` entirely, and also to allow easily iterating over options all
options that support any scope.
Ref: #29314
Problem: too many strlen() calls in getchar.c
Solution: refactor code and reduce strlen() calls
(John Marriott)
closes: vim/vim#16017e7a1bbf210
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: No longer able to show prompt messages with vim.ui_attach().
Solution: Do not execute callback in fast context for prompt message
kinds. These events must be safe to show the incoming message
so the event itself serves to indicate that the message
should be shown immediately.
Problem: When there is a tree view opened by :InspectTree and the
source buffer is open in multiple windows, closing one of the source
windows will lead to the tree view being closed as well.
Regression by #31181.
Solution: Check how many source windows are open when trying to
quit one. If there are more than one, keep the tree view(s) open.
If the only source window is closed, also close the tree view(s).
fix#31196
Problem: setting 'cmdheight' may cause hit-enter-prompt and echo output
to be missing
Solution: Before cleaning the cmdline, check the need_wait_return flag
(nwounkn)
closes: vim/vim#134322e48567007
Co-authored-by: nwounkn <nwounkn@gmail.com>
Problem: message history is fixed to 200
Solution: Add the 'msghistory' option, increase the default
value to 500 (Shougo Matsushita)
closes: vim/vim#160484bd9b2b246
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: Lua callbacks for "msg_show" events with vim.ui_attach() are
executed when it is not safe.
Solution: Disallow non-fast API calls for "msg_show" event callbacks.
Automatically detach callback after excessive errors.
Make sure fast APIs do not modify Nvim state.
Before calling "attach" a screen object is just a dummy container for
(row, col) values whose purpose is to be sent as part of the "attach"
function call anyway.
Just create the screen in an attached state directly. Keep the complete
(row, col, options) config together. It is still completely valid to
later detach and re-attach as needed, including to another session.
**Problem:** Currently node names with non-alphanumeric, non
underscore/hyphen characters (only possible with anonymous nodes) are
not given a proper error message. See tree-sitter issue 3892 for more
details.
**Solution:** Apply a different scanning logic to anonymous nodes to
correctly identify the entire node name (i.e., up until the final double
quote)
Problem: Crash when initializing for --startuptime errors.
Solution: Report the error to stderr, as neither logging nor messages
have been initialized yet.
Problem: Quitting source buffer for ```:InspectTree``` command raises
```E855``` when source buffer and tree views are the only open buffers.
Solution: Add ```QuitPre``` event to autocmd handling closing/hiding the
source buffer to close all open tree views. This allows nvim to quit
when source and tree buffers are the only open windows.
These changes enable tar.vim to keep permissions of files that were
edited intact instead of replacing them with the default permissions.
The major change for this is switching from "tar -OPxf", which reads out
the contents of the selected file from an tar archive to stdout to
"tar -pPxf" which extracts the selected file to the current directory
with permissions intact
This requirs the temporary directory to be created earlier.
closes: vim/vim#7379129a8446d2
Co-authored-by: Lennart00 <73488709+Lennart00@users.noreply.github.com>
This changes the type for the sorted pattern table from
`vim.filetype.mapping[]` to `vim.filetype.mapping.sorted[]`
E.g. instead of:
```lua
{
{ ['/debian/changelog$'] = {'debchangelog', { parent = '/debian/' } },
{ ['%.git/'] = { detect.git , { parent = 'git/', priority = -1 } },
}
```
It is now:
```lua
{
{ '/debian/, '/debian/changelog$', 'debchangelog' },
{ 'git/' , '%.git/' , detect.git , -1 },
}
```
Overall this should roughly cut the amount of tables used by 3, and
replaces lots of hash indexes with array indexes.
So let's revert "runtime(tex): add Number highlighting to syntax file"
This (partly) reverts commits 8e6b5034f32049fd0 and 6065755a39d838aab
fixes: vim/vim#16030622f6f5b9a
Co-authored-by: Christian Brabandt <cb@256bit.org>
- Enable folding of class, enum and interface declarations.
- Highlight constructor names with the Function highlight group, like
other special methods.
- Mark function definitions using special method names as errors.
- Highlight :type arguments.
fixes: vim/vim#14393#issuecomment-2042796198.
closes: vim/vim#13810818c641b6f
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Currently, the overriding object method definitions are
matched as vimFunctionError (:help builtin-object-methods,
v9.1.0148).
For example:
------------------------------------------------------------
vim9script
class Test
def string(): string
return "Test"
enddef
endclass
echo string(Test.new()) == Test.new().string()
------------------------------------------------------------
Instead, let's introduce a new syntax group vimMethodName
and make these methods its members. In order to emphasise
the link between the overriding methods and the overridden
functions for highlighting, vimMethodName is linked by
default to vimFuncName.
80aabaab66
Co-authored-by: Aliaksei Budavei <32549825+zzzyxwvut@users.noreply.github.com>
With the arrival of Vim9 classes, the syntax must allow for
_new_ constructors; multiple constructor definitions are
supported for a class, provided distinct suffix-names are
used. Currently, the defined constructors match either
vimCommand or vimFunctionError (for any newBar).
For example:
------------------------------------------------------------
vim9script
class Foo
def new()
enddef
def newBar()
enddef
endclass
------------------------------------------------------------
Since every constructor is required to bear a lower-cased
_new_ prefix name, it should suffice to distinguish them
from functions, and so there are no new highlight or syntax
groups introduced.
dfcef890cb
Co-authored-by: Aliaksei Budavei <32549825+zzzyxwvut@users.noreply.github.com>
Problem: Ext_messages chunks only contain the highlight attr id, which
is not very useful for vim.ui_attach() consumers.
Solotion: Add highlight group id to message chunks, which can easily be
used to highlight text in the TUI through nvim_buf_set_extmark():
hl_group = synIDattr(id, "name").
This is needed specifically for the second signature of
add_custom_command, which appends an operation to an existing target.
This will prevent the cmake warning CMP0175.
Reference: https://cmake.org/cmake/help/latest/policy/CMP0175.html
Problem: Highlight group id is not propagated to the end of the message call
stack, where ext_messages are emitted.
Solution: Refactor message functions to pass along highlight group id
instead of attr id.
Problem:
The `varp` argument for `set_option` is extraneous as the option's
variable pointer can be retrieved using the option's index and flags.
Solution:
Remove the `varp` argument for `set_option`
Problem: Inccommand preview callback may flush inaccurate cmdline cursor position.
Solution: Ensure cursor is where it belongs when doing command preview.
Problem: Can receive dozens of <MouseMove> events for same cell position. #30965
Solution: Leverage check_multiclick() to detect if cell position is unchanged.
Problem:
When tmpdir is local. The returned values from tmpname may already
exist. This can cause problems for tests which pass `create=false` as
they may require the file to not exist yet.
Solution:
When creating tmp names, always remove it to ensure it doesn't exist,
and optionally open it if `create~=false`
Additionally refactor the tmpname code and flattrn some functions into
constants.
Also while debugging this issue. It was discovered that `exec_lua()`
doesn't report error messages properly. This has been fixed.
Set the "matchparen_disable_cursor_hl" config variable to disable
highlighting the cursor with the MatchParen highlighting group.
closes: vim/vim#1598459834ba6df
Co-authored-by: Matteo Landi <matteo@matteolandi.net>
- Move mantic to unsupported
- Reorder names to maintain alphabetic order
- Bump date to submit upstream
closes: vim/vim#159919dadfe7a52
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: tests: still preferring python2 over python3
Solution: prefer Python 3 when picking a Python program in Vim tests,
by checking for the more specific python version first and
only when python3 not found, check for the python binary
(Yee Cheng Chin)
Most OSes have Python 3 mapped to `python3` instead of `python`. Vim
tests should prioritize using that instead of Python 2 in case that is
still installed on the host system.
closes: vim/vim#15986cef8ab2c75
Cherry-pick test changes from patch 8.2.{2824,4684}.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem:
There are three different ways of marking an option as hidden, `enable_if
= false`, `hidden = true` and `immutable = true`. These also have different
behaviors. Options hidden with `enable_if = false` can't have their value
fetched using Vim script or the API, but options hidden with `hidden = true` or
`immutable = true` can. On the other hand, options with `hidden = true` do not
error when trying to set their value, but options with `immutable = true` do.
Solution:
Remove `enable_if = false`, remove the `hidden` property for options, and use
`immutable = true` to mark an option as hidden instead. Also make hidden option
variable pointers always point to the default value, which allows fetching the
value of every hidden option using Vim script and the API. This does also mean
that trying to set a hidden option will now give an error instead of just being
ignored.
while the implementation is not tied to screen chars, it is a reasonable
expectation to support the same size. If nvim is able to display a
multibyte character, it will accept the same character as input,
including in normal mode commands like r{char}
Problem: :setglobal doesn't work properly for 'ffu' and 'tsrfu' when
the local value is set (after v9.1.0831)
Solution: Check os_flags instead of buffer option variable (zeertzjq).
closes: vim/vim#159806eda269600
Problem: :set doesn't work for 'cot' and 'bkc' after :setlocal.
Solution: clear the local flags when using :set (zeertzjq).
closes: vim/vim#1598146dcd84d24
Problem: The window opened :InspectTree or :EditQuery isn't closed when
the source buffer is unloaded, even though it is closed when
the buffer is hidden.
Solution: Also close the window on BufUnload.
Problem: 'findexpr' can't be used for lambads
(Justin Keyes)
Solution: Replace the findexpr option with the findfunc option
(Yegappan Lakshmanan)
related: vim/vim#15905closes: vim/vim#15976a13f3a4f5d
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: using wrong highlight group for spaces for popupmenu
Solution: use original attribute instead of combined attributed
(glepnir)
closes: vim/vim#15978bc10be7a40
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Long lists of available parsers make it hard to see WASM
status.
Solution: Add separate headings for "treesitter features" (ABI, WASM)
and "treesitter parsers". Also add minimum supported ABI version.
Problem: filetype: sway files are not recognized
Solution: detect '*.sw' files as sway filetype, include
a filetype plugin (Riley Bruins)
References:
https://github.com/FuelLabs/sway.
Comments taken from their syntax documentation. File extension taken
from the same documentation/GitHub's own recognition of these file types
closes: vim/vim#1597384b5b1c660
Co-authored-by: Riley Bruins <ribru17@hotmail.com>
Problem: `get_option_value_for` can perfectly replace `get_option_value_strict`, making the latter redundant.
Solution: Remove `get_option_value_strict`
Problem:
There are three separate functions for printing the `:set` command for
an setting an option to a file descriptor. These functions are used when
creating the session file for an option. Having a function for each type
increase code duplication and also makes it harder to add logic for new
option types.
Solution:
Replace `put_set(num|bool|string)` with a single `put_set` function
which works for all option types, this reduces code duplication and also
makes it trivial to add support for more option types in the future.
Problem: too many strlen() calls in register.c
Solution: refactor code, add string_T struct to keep track
of string lengths (John Marriott)
closes: vim/vim#1595279f6ffd388
Co-authored-by: John Marriott <basilisk@internode.on.net>
- Partition the handlers in vim.lsp.handlers as:
- client to server response handlers (RCS)
- server to client request handlers (RSC)
- server to client notification handlers (NSC)
Note use string indexes instead of protocol.methods for improved
typing in LuaLS (tip: use hover on RCS, RSC or NSC).
fixes: vim/vim#15961
while at it, remove the Decho comments in the s:NetrwOptionsRestore()
function
aa2ce6f580
Co-authored-by: Christian Brabandt <cb@256bit.org>
It did not work very well, at least on Debian 12, and I am not sure Git
Bash and WSL, for example, were taken care of as maintenance stalled.
The whole logic was somewhat convoluted with some parts repeatedly invoking
failed commands.
The file handling was outdated, for example, nowadays Netscape is rarely
used, and also opinionated, for example mainly Microsoft Paint and Gimp for
Image files.
Instead, let's use (xdg-)open and similar commands on other systems
which respects the user's preferences.
closes: vim/vim#157213d7e567ea7
Co-authored-by: Konfekt <Konfekt@users.noreply.github.com>
Co-authored-by: Luca Saccarola <96259932+saccarosium@users.noreply.github.com>
Problem: both `PmenuMatch` and `PmenuMatchSel` can provide helpful
information about characters which actually match query in completion
candidates. This is not as useful with default regular match, but much
more useful with 'completopt+=fuzzy'.
Solution: make both highlight groups bold. This will also affect
(i.e. benefit) other color schemes which do not define groups
separately.
This is possible since the recently merged changes to `PmenuMatch` and
`PmenuMatchSel` combine attributes with underlying "base" groups.
See PR 29980.
Problem: topline might be changed in diff mode unexpectedly
(Jaehwang Jung)
Solution: do not re-calculate topline, when using line() func
in diff mode.
fixes: vim/vim#15812closes: vim/vim#1595005a40e07c2
Co-authored-by: Christian Brabandt <cb@256bit.org>
`-NonInteractive` at least somewhat hints to pwsh/powershell, that shell
sessions created from :! are not interactive, though even that is not
foolproof, because powershell is weird.
`$PSStyle.OutputRendering='plaintext'` causes pwsh/powershell
to omit ANSI escape sequences in its output.
Problem: tests: Mac OS tests are too flaky
Solution: Increase max test timeout to 25 minutes,
allow up to 10 retries on Mac OS runners,
refactor runtest.vim (Milly).
closes: vim/vim#15940baab7c0865
Co-authored-by: Milly <milly.ca@gmail.com>
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: 'findexpr' completion doesn't set v:fname to cmdline argument.
Solution: Set v:fname to the cmdline argument as-is (zeertzjq).
closes: vim/vim#1593420e045f781
Problem: Currently we use macros with hardcoded flag values for option flags, which is messy and requires a lot of mental math for adding / removing option flags. Using macros for option flags also means that they cannot be used inside debuggers.
Solution: Create a new `OptFlags` enum that stores all the option flags in an organized way that is easier to understand.
Problem: Selecting an item in the right-click menu when clicking to the
left/right of it is confusing, especially in a UI that doesn't
support 'mousemoveevent'.
Solution: Don't select an item when clicking to the left/right of the
right-click menu.
feat(diagnostics)!: sort underline with severity_sort
BREAKING CHANGE: underline will be applied with a higher value than `vim.hl.priorities.diagnostics`
The workspace folder name is meant to be a human-readable name which is
only used in the UI. Comparing the name against root_dir is thus not
a valid comparison. Instead, we should compare the workspace folder's
URI against the root dir URI.
Problem: novice users relying on vimtutor won't know what to do when they follow the instructions and delete a couple lines and that breaks the line checker
Solution: tell the user to fix the line numbers after they're done
Instead of keeping `P_ALLOCED` and `P_DEF_ALLOCED` flags to check if an
option value is allocated, always allocate option values to simplify the
logic.
Ref: #25672
* deprecate old signatures
* move to new str_byteindex/str_utfindex signature
* use single-underscore name (double-underscore is reserved for Lua itself)
Problem: We use `void *` for option default values, which is confusing and can cause problems with type-correctness. It also doesn't accomodate for multitype options. On top of that, it also leads to default boolean option values not behaving correctly on big endian systems.
Solution: Use `OptVal` for option default values.
BREAKING CHANGE:
- `:set {option}<` removes the local value for all global-local options instead of just string global-local options.
- `:setlocal {option}<` copies the global value to the local value for number and boolean global-local options instead of removing the local value.
Problem: mapset() may remove unrelated mapping whose {rhs} matches the
restored mapping's {lhs}.
Solution: only match by {lhs} when unmapping for mapset() (zeertzjq).
closes: vim/vim#15935fdf135a052
Problem:
`lsp.buf_request` send the same params to all servers and many
calls to this pass PositionalParams which depends on the clients
offset_encoding. This can result with incorrect params being sent
to a server.
Solution:
`lsp.buf_request` `params` argument can now be passed as a function
which takes the client as the first argument. This is used in
lsp/buf.lua to construct correct params for each client request.
Problem: Coverity warns about dereferencing NULL ptr
in check_colorcolumn()
Solution: verify that wp is not null before accessing it
related: vim/vim#15914d0809869d6
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: tests: no error check when setting global 'briopt'
Solution: also parse and check global 'briopt' value (Milly)
closes: vim/vim#15911b38700ac81
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: tests: no error check when setting global 'cc'
Solution: also parse and check global 'cc' value (Milly)
closes: vim/vim#15914a441a3eaab
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: tests: no error check when setting global 'isk'
Solution: also parse and check global 'isk' value (Milly)
closes: vim/vim#159155e7a6a4a10
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: tests: no error check when setting global 'fdm' to empty value
Solution: Also check global 'fdm' value for being empty (Milly).
closes: vim/vim#15916142cad1f88
Co-authored-by: Milly <milly.ca@gmail.com>
PROBLEM:
There are several limitations to vim.str_byteindex, vim.str_utfindex:
1. They throw given out-of-range indexes. An invalid (often user/lsp-provided)
index doesn't feel exceptional and should be handled by the caller.
`:help dev-error-patterns` suggests that `retval, errmsg` is the preferred
way to handle this kind of failure.
2. They cannot accept an encoding. So LSP needs wrapper functions. #25272
3. The current signatures are not extensible.
* Calling: The function currently uses a fairly opaque boolean value to
indicate to identify the encoding.
* Returns: The fact it can throw requires wrapping in pcall.
4. The current name doesn't follow suggestions in `:h dev-naming` and I think
`get` would be suitable.
SOLUTION:
- Because these are performance-sensitive, don't introduce `opts`.
- Introduce an "overload" that accepts `encoding:string` and
`strict_indexing:bool` params.
```lua
local col = vim.str_utfindex(line, encoding, [index, [no_out_of_range]])
```
Support the old versions by dispatching on the type of argument 2, and
deprecate that form.
```lua
vim.str_utfindex(line) -- (utf-32 length, utf-16 length), deprecated
vim.str_utfindex(line, index) -- (utf-32 index, utf-16 index), deprecated
vim.str_utfindex(line, 'utf-16') -- utf-16 length
vim.str_utfindex(line, 'utf-16', index) -- utf-16 index
vim.str_utfindex(line, 'utf-16', math.huge) -- error: index out of range
vim.str_utfindex(line, 'utf-16', math.huge, false) -- utf-16 length
```
Problem: tests: minor issues in gen_opt_test.vim
Solution: fix restore value for 'undolevels', fix comment, fix
wrong cpo value, add equality test for global-local options on
switchback (Milly).
closes: vim/vim#15913231480f975
Cherry-pick gen_opt_test.vim change from patch 9.1.0807.
Co-authored-by: Milly <milly.ca@gmail.com>
These were imported from the v0.3.3 git tag
https://github.com/neovim/libvterm/tree/v0.3.3 and not the latest
commit. This is for compatibility reasons as the libvterm code was
imported from v0.3.3.
Problem:
Hidden options are documented despite being no-ops.
Solution:
Remove docs for hidden options.
Move tags for options that we plan to restore, to ":help nvim-missing".
Move tags for permanently removed options, to ":help nvim-removed".
Problem: Currently Neovim only searches for lpeg.dylib, liblpeg.dylib,
etc. on MacOS, but a normal installation of lpeg will produce lpeg.so
instead. There are explicit workarounds for this by modifying lpeg's
package in Homebrew, and will shortly be another in spack.
Solution: also search for lpeg.so even if that's not the platform
default, because Lua and luarocks use it anyway.
Forcing the build type to be one of the default types was intended to
prevent usage of custom build types which risks unpredictability.
Unfortunately, many distributions patch this check out so they can use
a custom type anyway, making the check moot in the first place. Instead,
allow custom build types but don't try to accomodate them in the code:
we're making the assumption that anyone who wants to use a custom build
type will be able to set any additional necessary flags needed for their
specific system.
Problem: too many strlen() calls in cmdhist.c
Solution: refactor code and remove strlen() calls
(John Marriott)
closes: vim/vim#158888df07d0ca3
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: testing of options can be further improved
Solution: split the generated option test into test_options_all.vim,
add more test cases, save and restore values, fix use-after-free
closes: vim/vim#158946eca04e9f1
Co-authored-by: Milly <milly.ca@gmail.com>
Problem:
`vim.validate()` takes two forms when it only needs one.
Solution:
- Teach the fast form all the features of the spec form.
- Deprecate the spec form.
- General optimizations for both forms.
- Add a `message` argument which can be used alongside or in place
of the `optional` argument.
Problem:
- `vim.highlight` module does not follow `:help dev-name-common`, which
documents the name for "highlight" as "hl".
- Shorter names are usually preferred.
Solution:
Rename `vim.highlight` to `vim.hl`.
This is not a breaking change until 2.0 (or maybe never).
Problem: tests: tests may fail on Windows environment
Solution: use shellcmdflag=/D to skip executing autorun from
the registry (Milly)
closes: vim/vim#159004f5681dbdf
Cherry-pick Test_cursorhold_insert_with_timer_interrupt() change from
patch 8.2.1836.
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: tests: Test_set_values() is not comprehensive enough
Solution: Add a lot more test cases (Milly)
closes: vim/vim#15892cc15bbcbc4
Co-authored-by: Milly <milly.ca@gmail.com>
vim-patch:8.2.4744: a terminal window can't use the bell
vim-patch:8.2.4745: using wrong flag for using bell in the terminal
BREAKING CHANGE: Bells from :terminal are now silent by default, unless
'belloff' option doesn't contain "term" or "all".
Problem: Insufficient test coverage for validation of option values.
Solution: Port Vim's gen_opt_test.vim and make it work with Nvim.
vim-patch:9.1.0760: tests: no error reported, if gen_opt_test.vim fails
vim-patch:9.1.0791: tests: errors in gen_opt_test.vim are not shown
Problem:
If there are multiple LSP clients, it's not clear which actions are provided by which servers. #30710
Solution:
Show the server name next to each action (only if there are multiple clients).
This commit makaes the following changes to the vim help syntax:
- fix excessive URL detection in help, because `file:{filename}` in
doc/options.txt is determined to be a URL.
- update highlighting N for :resize in help
- split Italian-specific syntax into separate help script
- highlight `Note` in parentheses in help
- update 'titlestring' behaviour in documentation for invalid '%' format
closes: vim/vim#158836c2fc377bf
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: tests: ':resize + 5' has invalid space after '+'
Solution: Correct the test (Milly)
closes: vim/vim#15884c0cba184f5
Co-authored-by: Milly <milly.ca@gmail.com>
Problem:
Previously the index was only checked against the UTF8 length. This
could cause unexpected behaviours for strings containing multibyte chars
Solution:
Check indicies correctly against their max value before returning the
fallback length
Problem: tests: quickfix update test does not test location list
(after: v9.1.0.785)
Solution: update Test_quickfix_buffer_contents to test with location
lists (Yegappan Lakshmanan)
closes: vim/vim#158796a1deaf5ad
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Some runtime files no longer spark joy.
Solution: Kondo the place up.
Still sparks _some_ joy (moved to new `runtime/scripts` folder):
* `macros/less.*`
* `mswin.vim`
* `tools/emoji_list.lua`
No longer sparks joy (removed):
* `macmap.vim` (gvimrc file; not useful in Nvim)
* `tools/check_colors.vim` (no longer useful with new default colorscheme and treesitter)
* `macros/editexisting.vim` (throws error on current Nvim)
* `macros/justify.vim` (obsolete shim for `packadd! justify`)
* `macros/matchit.vim` (same)
* `macros/shellmenu.vim` (same)
* `macros/swapmous.vim` (same)
Problem: cannot preserve error position when setting quickfix lists
Solution: Add the 'u' action for setqflist()/setloclist() and try
to keep the closes target position (Jeremy Fleischman)
fixes: vim/vim#15839closes: vim/vim#1584127fbf6e5e8
Co-authored-by: Jeremy Fleischman <jeremyfleischman@gmail.com>
Problem: tests: using wrong neomuttlog file name
Solution: use correct file name
related: vim/vim#158580c59c30271
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: The standard statusline example is missing the preview flag
"%w"
Solution: Add the preview flag "%w"
closes: vim/vim#158747b5e52d16f
Co-authored-by: saher <msaher.shair@gmail.com>
Problem: Setting title while TUI buffer is almost full may cause the
end of a flush to be treated as a part of an OSC 2 or OSC 0
sequence, leading to problems like invisible cursor.
Solution: Make the whole sequence to set title a unibi_ext string.
Now that #16425 is fixed, use Unicode again to reduce screen height.
Unfortunately composing chars still can't be used, as it turns out that
composing chars may be missing when sent separately from the base char
at the last char a screen line.
Problem: Simplify() does not remove slashes from "///path".
Solution: Reduce > 2 slashes to one. (closesvim/vim#6263)
fdcbe3c3fe
Omit Test_readdirex() change: changed again in patch 9.0.0323.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: tests: not enough tests for setting options
Solution: Add more comprehensive tests to test_options (Milly).
closes: vim/vim#15856484facebe4
Restore behavior of &l:option for unset local boolean options that was
accidentally changed in #26429.
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: test_strftime may fail because of missing TZ data
Solution: Use GMT offsets to validate timezone differences (James McCoy)
Some systems only provide timezones that follow the geographical region
naming (e.g. America/New_York) by default and require an additional
install for other names (like EST).
The GMT+<offset> format must always be honored, so use that to generate
distinct data for the test.
closes: vim/vim#15848ea997edc7a
Co-authored-by: James McCoy <jamessan@jamessan.com>
**Problem:** Tree-sitter 0.24.0 introduced a new symbol type to denote
supertype nodes (`TSSymbolTypeSupertype`). Now, `language.inspect()`
(and the query `omnifunc`) return supertype symbols, but with double
quotes around them.
**Solution:** Mark a symbol as "named" based on it *not* being an
anonymous node, rather than checking that it is a regular node (which a
supertype also is not).
**Problems:**
- `vim.treesitter.language.inspect()` returns duplicate
symbol names, sometimes up to 6 of one kind in the case of `markdown`
- The list-like `symbols` table can have holes and is thus not even a
valid msgpack table anyway, mentioned in a test
**Solution:** Return symbols as a map, rather than a list, where field
names are the names of the symbol. The boolean value associated with the
field encodes whether or not the symbol is named.
Note that anonymous nodes are surrounded with double quotes (`"`) to
prevent potential collisions with named counterparts that have the same
identifier.
This commit also marks `child_containing_descendant()` as deprecated
(per upstream's documentation), and uses `child_with_descendant()` in
its place. Minimum required tree-sitter version will now be `0.24`.
Problem:
Using a single RPC request to child server isn't enough to prevent race
between nvim_paste and nvim_input.
Solution:
Ensure both child client and child server have processed pending events
by sending an empty DCS response to the child client and waiting for
TermResponse autocommand on the child server.
Problem: on `CompleteDone` cursor can jump to the end of line instead of
the end of the completed word.
Solution: remove only inserted word for snippet expansion instead of everything
until eol.
Fixes#30656
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: some missing changes from v9.1.0771
Solution: use correct highlighting attribute and adjust comments
(glepnir)
closes: vim/vim#158367baa014d0f
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Currently completion attribute hl_group is combined with
all items, which is redundant and confusing with kind_hlgroup
Solution: Renamed to abbr_hlgroup and combine it only with the abbr item
(glepnir).
closes: vim/vim#158180fe17f8ffb
Co-authored-by: glepnir <glephunter@gmail.com>
The syntax script allowed for single backslash escapes like this
"string\""
But did not accommodate for the uncommon case:
"<key>\\"
Let's fix this by also skipping over double backslashes in the
skillString region.
closes: vim/vim#15832cb1d1dcc87
Co-authored-by: Simão Afonso @ Powertools Tech <simao.afonso@powertools-tech.com>
Problem: current command completion is a bit limited
Solution: Add the shellcmdline completion type and getmdcomplpat()
function (Ruslan Russkikh).
closes: vim/vim#158230407d621bb
Co-authored-by: Ruslan Russkikh <dvrussk@yandex.ru>
Problem: A cmdlen == 0 condition is always true as ccline.cmdlen == 0
was already checked above (after v9.1.0766).
Solution: Remove the condition and the variable.
(zeertzjq)
closes: vim/vim#15830c9aa6e4f2a
Problem:
In h2 headings, the first tag points to an invalid anchor. This used to
work but regressed a few months ago, possibly related to
ceea6898a8.
Solution:
- Simplify the logic, don't try to be clever:
- Always use to_heading_tag() for the h2 `id`.
- Also:
- Render tags as `<span>`, because `<code>` is unnecessary and doesn't
look great in headings.
- In the main h1, use "foo.txt" as the anchor `name` (rarely used),
prefer the next found tag for the `href`.
Problem:
Neovim will not build for ARM64 using MSVC due to misconfigured
gettext dependency build settings.
Solution:
Fix the dependency build settings for gettext when building with MSVC.
Problem: too many strlen() calls in ex_getln.c
Solution: refactor the code to reduce the number of strlen() calls
(John Marriott)
closes: vim/vim#15809ccf8907570
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem:
Int pointer cast to unsigned long pointer causes potential memory
corruption.
Solution:
Cast and store value first, then pass the new pointer.
Problem: No test for patches 6.2.418 and 7.3.489
Solution: Add a test. Fix some whitespace problems in test_mapping.vim.
Document the behavior (zeertzjq).
closes: vim/vim#158155df3cb2898
Problem:
tagfunc failed in a weird buffer (either a directory or some other
non-file buffer, I don't remember):
E987: Invalid return value from tagfunc
E5108: Error executing lua …/runtime/lua/vim/lsp/util.lua:311: EISDIR: illegal operation on a directory
stack traceback:
at this line:
local data = assert(uv.fs_read(fd, stat.size, 0))
Solution:
Check for directory.
Problem: [security]: use-after-free when closing a buffer
Solution: When splitting the window and editing a new buffer,
check whether the newly to be edited buffer has been marked
for deletion and abort in this case
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-rj48-v4mq-j4vg51b62387be
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: 'cedit', 'termwinkey' and 'wildchar' may not be parsed
correctly
Solution: improve string_to_key() function in option.c
(Milly)
- Problem: `^@` raises an error.
Solution: Store as `<Nul>`.
- Problem: `<t_xx` does not raise an error.
Solution: Raise an error if closing `>` is missing.
- Problem: Single `<` or `^` raises an error. It is inconvenient for users.
Solution: They are stored as a single character.
closes: vim/vim#15811a9c6f90918
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: :cd completion fails on Windows with backslash in path
Solution: switch no_bslash argument to FALSE in file_pat_to_reg_pat()
Note: only fixes the problem on Windows. For Unix, we still need to
escape backslashes since those are taken as regex atoms (and could be
invalid regex atoms).
fixes: vim/vim#15643closes: vim/vim#158081a31c430bb
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
- Some servers like LuaLS add unwanted blank lines after multiline
`@param` description.
- List items do not wrap nicely.
Solution:
- When rendering the LSP doc hover, remove blank lines in each `@param`
or `@return`.
- But ensure exactly one empty line before each.
- Set 'breakindent'.
The current LspAttach example shows setting options which are already
set by default. We should expect that users are going to copy-paste
these examples, so we shouldn't use examples that are superfluous and
unnecessary.
Problem: `runtime/tools/emoji_list.vim` is a Lua script masquerading as
Vimscript, which is unnecessary now that `:source` works for Lua files.
Solution: Remove Vimscript wrapper.
Problem:
Index for global and numbered marks out of bounds when indexing into
numbered marks array (contains 10 elements but indexed by values 26 through 35.
Solution:
Offset index by number of global marks to correctly index numbered marks array.
Problem: Cannot build against Ruby 33 dynamically
Solution: Ruby 33 removed transient heap, so do not use
rb_ary_transient anymore, NoMethodError format changed,
so update test for expected error message
(Isao Sato)
- ruby-3.3 removed transient heap for ruby/dyn
when +ruby/dyn with ruby-3.3 do command :ruby, E448 occur.
ruby-3.3 has no transient heap anymore, so disable rb_ary_transient etc.
$ LC_ALL=C VIMRUNTIME=runtime ./src/vim -u NONE -c 'ruby puts RUBY_VERSION'
"=> Error detected while processing command line:
"=> E448: Could not load library function rb_ary_detransient
"=> E266: Sorry, this command is disabled, the Ruby library could not be
loaded.
- ruby-3.3 changed NoMethodError format:
$ rvm 3.2.2, 3.3.0-rc1 do ruby -e 'begin; nil.name; rescue => e; puts "%s : %s"%[RUBY_VERSION, e.message]; end '
=> 3.2.2 : undefined method `name' for nil:NilClass
=> 3.3.0 : undefined method `name' for nil
so loose pattern in Test_ruby_Vim_buffer_get()
closes: vim/vim#13741443657b32b
Co-authored-by: Isao Sato <svardew@gmail.com>
Problem: screenpos() may return invalid position
after switching buffers (Greg Hurrell)
Solution: reset w_leftcol if wrapping has been set
after copying wrap option
fixes: vim/vim#15792closes: vim/vim#15803b065a10e24
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
There appears to be an intentional array out of bounds read when
indexing global and numbered marks since they are adjacent in the struct
that holds them.
Solution:
Explicitly index numeric marks array to avoid reading out of bounds from
global marks array.
With "g:markdown_fenced_languages" defined and "java" added
to its list, a circular dependency between the Markdown and
Java syntax files will be made. To break it, no Markdown
documentation comments will be recognised in fenced blocks
in Markdown files; in order to view Java source files,
"java" must be removed from "g:markdown_fenced_languages",
and this task can be automated as follows.
1) Add to "~/.after/ftplugin/java.vim":
------------------------------------------------------------
if exists("g:markdown_fenced_languages") &&
\ !(exists("g:java_ignore_javadoc") ||
\ exists("g:java_ignore_markdown"))
let s:idx = index(g:markdown_fenced_languages, 'java')
if s:idx > -1
call remove(g:markdown_fenced_languages, s:idx)
endif
unlet s:idx
endif
------------------------------------------------------------
2) Optionally add to "~/.after/ftplugin/markdown.vim":
------------------------------------------------------------
if exists("g:markdown_fenced_languages") &&
\ index(g:markdown_fenced_languages, 'java') < 0
call add(g:markdown_fenced_languages, 'java')
endif
------------------------------------------------------------
(Make sure that the above snippets appear in the files under
the "ftplugin" NOT "syntax" directory.)
Finally, unless the new version of the syntax file is made
available from "$VIMRUNTIME" (and from "~/.vim/syntax" if
necessary), OTHER discoverable file versions will be used
whose behaviour may interfere with this fix.
related: vim/vim#15740closes: vim/vim#1579660310a4b26
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: it's possible to set an invalid key to 'wildcharm'
Solution: error out, if the 'wildcharm' value is an invalid key
(Milly)
closes: vim/vim#1578740c6babc17
Co-authored-by: Milly <milly.ca@gmail.com>
Some commands don't accept "count" and only work with "range". It's not
clear why. The issue is tracked at [1], but this is a workaround for
now.
[1]: https://github.com/neovim/neovim/issues/30641
Problem: Lua accessors for
- global, local, and special variables (`vim.{g,t,w,b,v}.*`), and
- options (`vim.{o,bo,wo,opt,opt_local,opt_global}.*`),
do not have command-line completion, unlike their vimscript counterparts
(e.g., `g:`, `b:`, `:set`, `:setlocal`, `:call <fn>`, etc.).
Completion for vimscript functions (`vim.fn.*`) is incomplete and does
not list all the available functions.
Solution: Implement completion for vimscript function, variable and
option accessors in `vim._expand_pat` through:
- `getcompletion()` for variable and vimscript function accessors, and
- `nvim_get_all_options_info()` for option accessors.
Note/Remark:
- Short names for options are yet to be implemented.
- Completions for accessors with handles (e.g. `vim.b[0]`, `vim.wo[0]`)
are also yet to be implemented, and are left as future work, which
involves some refactoring of options.
- For performance reasons, we may want to introduce caching for
completing options, but this is not considered at this time since the
number of the available options is not very big (only ~350) and Lua
completion for option accessors appears to be pretty fast.
- Can we have a more "general" framework for customizing completions?
In the future, we may want to improve the implementation by moving the
core logic for generating completion candidates to each accessor (or
its metatable) or through some central interface, rather than writing
all the accessor-specific completion implementations in a single
function: `vim._expand_pat`.
An implication of this current approach is that `NVIM_API_LEVEL` should be
bumped when a new Lua function is added.
TODO(future): add a lint check which requires `@since` on all new functions.
ref #25416
**Problem:** The documentation for `TSNode` and `TSTree` methods is
incomplete from the LSP perspective. This is because they are written
directly to the vimdoc, rather than in Lua and generated to vimdoc.
**Solution:** Migrate the docs to Lua and generate them into the vimdoc.
This requires breaking up the `treesitter/_meta.lua` file into a
directory with a few different modules.
This commit also makes the vimdoc generator slightly more robust with
regard to sections that have multiple help tags (e.g. `*one* *two*`)
Some composite/compound types even as basic as `(string|number)[]` are
not currently supported by the luacats LPEG grammar used by gen_vimdoc.
It would be parsed & rendered as just `string|number`.
Changeset adds better support for these types.
Problem:
Tree cursors can only be efficient when they are re-used.
Short-lived cursors are very slow.
Solution:
Reimplement functions that use short-lived cursors.
Problem: quickfix list does not handle hardlinks well
Solution: store original file name with quickfix entry
(Austin Chang)
Quickfix list shows entries with duplicate name if the file is opened
with the path of hard links.
The major cause is that qflist assumed that the filename passed into
`qf_add_entry` matches the filename opened with the buffer.
This patch handles this case by introduce a `qf_fname` into `qfline_S`
structure. It stores the filename from `qf_add_entry` for each quickfix
line.
closes: vim/vim#156872982299699
Co-authored-by: Austin Chang <austin880625@gmail.com>
Ensure the screen is fully updated before blocking for input. This did
not always happen before, for example when setting `cursorline
scrolloff=9999`, which lead to jerky movement when using some GUI
applications.
Because of the duality of redraw_later, this can't be done in
command-line or when waiting for "Press ENTER". In many of those cases
the redraw is expected AFTER the key press, while normally it should
update the screen immediately. So, those special cases are excluded.
Problem: fixed order of items in insert-mode completion menu
Solution: Introduce the 'completeitemalign' option with default
value "abbr,kind,menu" (glepnir).
Adding an new option `completeitemalign` abbr is `cia` to custom
the complete-item order in popupmenu.
closes: vim/vim#14006closes: vim/vim#157606a89c94a9e
Problem:
The `_watch.watch()` strategy may fail if the given path does not exist:
…/vim/_watch.lua:101: ENOENT: no such file or directory
stack traceback:
[C]: in function 'assert'
…/vim/_watch.lua:101: in function <…/vim/_watch.lua:61>
[string "<nvim>"]:5: in main chunk
- `_watch.watch()` actively asserts any error returned by `handle:start()`.
- whereas `_watch.watchdirs()` just ignores the result of `root_handle:start()`.
Servers may send "client/registerCapability" with "workspace/didChangeWatchedFiles"
item(s) (`baseUri`) which do not actually exist on the filesystem:
https://github.com/neovim/neovim/issues/28058#issuecomment-2189929424
{
method = "client/registerCapability",
params = {
registrations = { {
method = "workspace/didChangeWatchedFiles",
registerOptions = {
watchers = { {
globPattern = {
baseUri = "file:///Users/does/not/exist",
pattern = "**/*.{ts,js,mts,mjs,cjs,cts,json,svelte}"
}
},
...
}
Solution:
- Remove the assert in `_watch.watch()`.
- Show a once-only message for both cases.
- More detailed logging is blocked until we have `nvim_log` / `vim.log`.
fix#28058
Problem: can set cedit to an invalid value
Solution: Check that the value is a valid key name
(Milly)
closes: vim/vim#1577825732435c5
Co-authored-by: Milly <milly.ca@gmail.com>
When typing `:h usr` it redirects to usr_01.txt, but I'd argue
usr_toc.txt is more useful as you can see an overview of all manuals.
When I usr `:h usr` I personally always intend to go to `usr_toc`.
closes: vim/vim#15779baee8448d1
Co-authored-by: dundargoc <gocdundar@gmail.com>
Problem: Wrong display when typing in diff mode with 'smoothscroll'.
Solution: Use adjust_plines_for_skipcol() (zeertzjq).
closes: vim/vim#1577647f8584a80
Problem: For :InspectTree, indent size (`&shiftwidth`) for the tree
viewer may be incorrect.
This is because the tree viewer buffer with the filetype `query` does
not explicitly configures the tab size, which can mismatch with the
default indent size (2) assumed by TSTreeView's implementation.
Solution: Set shiftwidth to be the same as TSTreeViewOpts specifies,
which defaults to 2.
Problem:
The <br> hack in a0c64fe816 causes weird layout if a "h4 pseudo-heading"
is not the only tag on the line. For example in the help text below, the
"*'buflisted'*" tag was treated as h4 and followed by <br>, which is
obviously wrong:
*'buflisted'* *'bl'* *'nobuflisted'* *'nobl'* *E85*
'buflisted' 'bl' boolean (default on)
Solution:
Only treat a tag as "h4 pseudo-heading" if it is the only tag in the
line. This is fragile, but in practice seems to get the right balance.
Problem:
The right-aligned tag "pseudo-heading" layout mushes together with the
left-aligned text. This is especially messy in a narrow viewport.
Solution:
Put a `<br>` on it. This is a hack until tree-sitter-vimdoc recognizes
these pseudo-headings.
Complement "g:java_ignore_javadoc" with "g:java_ignore_html"
and "g:java_ignore_markdown" to allow selectively disabling
the recognition of HTML and CommonMark respectively.
(Note that this is not a preview feature.)
======================== LIMITATION ========================
According to the syntactical details of JEP 467:
> Any leading whitespace and the three initial / characters
> are removed from each line.
>
> The lines are shifted left, by removing leading whitespace
> characters, until the non-blank line with the least
> leading whitespace has no remaining leading whitespace.
>
> Additional leading whitespace and any trailing whitespace
> in each line is preserved, because it may be significant.
the following example:
------------------------------------------------------------
/// A summary sentence.
/// A list:
/// - Item A.
/// - Item B.
///
/// Some code span, starting here `
/// 1 + 2 ` and ending at the previous \`.
------------------------------------------------------------
should be interpreted as if it were written thus:
------------------------------------------------------------
///A summary sentence.
/// A list:
/// - Item A.
/// - Item B.
///
/// Some code span, starting here `
/// 1 + 2 ` and ending at the previous \`.
------------------------------------------------------------
Since automatic line rewriting will not be pursued, parts of
such comments having significant whitespace may be ‘wrongly’
highlighted. For convenience, a &fex function is defined to
‘correct’ it: g:javaformat#RemoveCommonMarkdownWhitespace()
(:help ft-java-plugin).
References:
https://openjdk.org/jeps/467https://spec.commonmark.org/0.31.2closes: vim/vim#1574085f054aa3f
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Co-authored-by: Tim Pope <code@tpope.net>
Problem:
Linematch used to use strchr to navigate a string, however strchr does
not supoprt embedded NULs.
Solution:
Use `mmfile_t` instead of `char *` in linematch and introduce `strnchr()`.
Also remove heap allocations from `matching_char_iwhite()`
Fixes: #30505
Problem: No clear way to check whether parsers are available for a given
language.
Solution: Make `language.add()` return `true` if a parser was
successfully added and `nil` otherwise. Use explicit `assert` instead of
relying on thrown errors.
Problem: Language names are only registered for filetype<->language
lookups when parsers are actually loaded; this means users cannot rely
on `vim.treesitter.language.get_lang()` or `get_filetypes()` to return
the correct value when language and filetype coincide and always need to
add explicit fallbacks.
Solution: Always return the language name as valid filetype in
`get_filetypes()`, and default to the filetype in `get_lang()`. Document
this behavior.
Some gnu indent options take negative numbers (e.g. --indent-label).
Add matching for an optional single '-' before the number.
closes: vim/vim#15754ee20fc8062
Co-authored-by: John M Devin <john.m.devin@gmail.com>
Problem: filetype: bun and deno history files not recognized
Solution: detect '.bun_repl_history' and 'deno_history.txt' as
javascript filetype (Wu, Zhenyu)
closes: vim/vim#157618a2aea8a62
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: Test_halfpage_longline() fails on large terminals
(lazypingu)
Solution: Use a window with known width (zeertzjq).
fixes: vim/vim#15755closes: vim/vim#15756fa117387ee
loop->children might have been a linked list because used to be
modified in place while looped over. However the loops that exists
rather schedules events to be processed later, outside of the loop,
so this can not happen anymore.
When a linked list is otherwise useful it is better to use
lib/queue_defs.h which defines an _intrusive_ linked list (i e it
doesn't need to do allocations for list items like klist ).
Problem:
Headings in :help do not stand out visually.
Solution:
Define a non-standard `@markup.heading.1.delimiter` group and
special-case it in `highlight_group.c`.
FUTURE:
This is a cheap workaround until we have #25718 which will enable:
- fully driven by `vimdoc/highlights.scm` instead of using highlight
tricks (`guibg=bg guifg=bg guisp=fg`)
- better support of "cterm" ('notermguicolors')
Problem:
EditQuery shows swapfile ATTENTION, but this buffer is not intended for
preservation (and the dialog breaks the UX).
Solution:
Set 'noswapfile' on the buffer before renaming it.
Problem: diff mode does not handle overlapping diffs correctly
Solution: correct the logic to handle overlapping blocks
(Yukihiro Nakadaira)
Vim merges overlapped diff blocks and it doesn't work expectedly
in some situation.
closes: vim/vim#1573506fe70c183
Co-authored-by: Yukihiro Nakadaira <yukihiro.nakadaira@gmail.com>
Problem:
checkhealth report sections are not visually separated.
Solution:
Highlight with "reverse".
TODO: migrate checkhealth filetype to use treesitter.
TODO: default :help should also highlight headings more boldy!
Problem: getcmdprompt() implementation can be improved
Solution: Improve and simplify it (h-east)
closes: vim/vim#1574325876a6cdd
Co-authored-by: h-east <h.east.727@gmail.com>
Problem: No way to get prompt for input()/confirm()
Solution: add getcmdprompt() function (Shougo Matsushita)
(Shougo Matsushita)
closes: vim/vim#156676908428560
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
**Problem:** `is_ancestor()` uses a slow, bottom-up parent lookup which
has performance pitfalls detailed in #28512.
**Solution:** Take `is_ancestor()` from $O(n^2)$ to $O(n)$ by
incorporating the use of the `child_containing_descendant()` function
CID 497370: Overflowed constant (INTEGER_OVERFLOW)
Expression `tsize - ret.has_type_key`, where tsize=0 and
ret.has_type_key=1, underflows the type that
receives it, an unsigned integer 64 bits wide.
CID 509910: Overflowed constant (INTEGER_OVERFLOW)
Expression stack.size++, which is equal to 0, where stack.size is
known to be equal to 18446744073709551615, overflows the type that
receives it, an unsigned integer 64 bits wide
Problem: When using nvim_paste in a mapping during a macro recording,
both the mapping and the paste are recorded, causing the paste
to be performed twice when replaying the macro.
Solution: Only record a paste when it is from RPC.
Unfortunately this means there is no way for a script to make a recorded
paste. A way to enable that can be discussed later if there is need.
Before this PR, the behavior of nvim_paste is:
- When vim.paste() returns false, return false to the client, but treat
following chunks normally (i.e. rely on the client cancelling the
paste as expected).
- When vim.paste() throws an error, still return true to the client, but
drain the following chunks in the stream without calling vim.paste().
There are two problems with such behavior:
- When vim.paste() errors, the client is still supposed to send the
remaining chunks of the stream, even though they do nothing.
- Having different code paths for two uncommon but similar situations
complicates maintenance.
This PR makes both the cancel case and the error case return false to
the client and drain the remaining chunks of the stream, which, apart
from sharing the same code path, is beneficial whether the client checks
the return value of nvim_paste or not:
- If the client checks the return value, it can avoid sending the
following chunks needlessly after an error.
- If the client doesn't check the return value, chunks following a
cancelled chunk won't be pasted on the server regardless, which leads
to less confusing behavior.
Problem:
fnamemodify with the :r flag will not strip extensions if the filename
starts with a ".". This means that files named ".in" could cause an
infinite loop.
Solution:
Add early return if the filename was not changed
Problem:
`vim.fs.dirname([[C:\User\XXX\AppData\Local]])` returns "." on
mingw/msys2.
Solution:
- Check for "mingw" when deciding `iswin`.
- Use `has("win32")` where possible, it works in "fast" contexts since
b02eeb6a72.
In the api_info() output:
:new|put =map(filter(api_info().functions, '!has_key(v:val,''deprecated_since'')'), 'v:val')
...
{'return_type': 'ArrayOf(Integer, 2)', 'name': 'nvim_win_get_position', 'method': v:true, 'parameters': [['Window', 'window']], 'since': 1}
The `ArrayOf(Integer, 2)` return type didn't break clients when we added
it, which is evidence that clients don't use the `return_type` field,
thus renaming Dictionary => Dict in api_info() is not a breaking change.
In the api_info() output:
:new|put =map(filter(api_info().functions, '!has_key(v:val,''deprecated_since'')'), 'v:val')
...
{'return_type': 'ArrayOf(Integer, 2)', 'name': 'nvim_win_get_position', 'method': v:true, 'parameters': [['Window', 'window']], 'since': 1}
The `ArrayOf(Integer, 2)` return type didn't break clients when we added
it, which is evidence that clients don't use the `return_type` field,
thus renaming Dictionary => Dict in api_info() is not (in practice)
a breaking change.
Problem: When input immediately follows end of bracketed paste, the
nvim_input may be processed before the nvim_paste.
Solution: Ensure some waiting after the end of a bracketed paste.
Problem:
Noise in stderr from src/nvim/po/CMakeLists.txt during build:
48 substitutions on 48 lines
"optwin.js" "optwin.js" 1299L, 57582B written
385 substitutions on 385 lines
"nvim.pot" "nvim.pot" 9318L, 180177B written
Solution:
Run with `-c silent source` instead of `-S`.
Problem: incorrect internal diff with an empty file
Solution: Set pointer to NULL, instead of using an empty line file
(Yukihiro Nakadaira)
When using internal diff, empty file is read as one empty line file.
So result differs from external diff.
closes: vim/vim#15719f1694b439b
Co-authored-by: Yukihiro Nakadaira <yukihiro.nakadaira@gmail.com>
- Fixes 'autoindent' being applied during redo.
- Makes redoing a large paste significantly faster.
- Stores pasted text in the register being recorded.
Fix#28561
Problem: [security]: use-after-free in ex_getln.c
Solution: free pointer p a bit later (John Marriott)
closes: vim/vim#15712a6de28755e
Co-authored-by: John Marriott <basilisk@internode.on.net>
Define "g:java_syntax_previews" and include number 476 in
its list to enable this recognition:
------------------------------------------------------------
let g:java_syntax_previews = [476]
------------------------------------------------------------
Reference:
https://openjdk.org/jeps/476closes: vim/vim#1570950423ab808
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Define "g:java_syntax_previews" and include number 455 in
its list to enable this recognition:
------------------------------------------------------------
let g:java_syntax_previews = [455]
------------------------------------------------------------
Reference:
https://openjdk.org/jeps/455closes: vim/vim#1569823079450a8
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
There appears to be a bug in `make` where if a rule asks `make` to
invoke a command called `foo`, and `foo` exists somewhere in `$PATH` as
a directory (not an executable file), `make` will attempt to `execve`
that directory instead of continuing to search in later parts of the
`$PATH` for `foo` as a true executable.
The cause can be traced back to a bug in Make 4.3 which stems from their
use of the findprog function in Gnulib. This was reported to the Make
maintainers here:
https://savannah.gnu.org/bugs/index.php?57962
and then forwarded to the Gnulib maintainers here:
https://github.com/coreutils/gnulib/commit/7b1de4a
Make 4.4 does not have this bug, and I can confirm that I'm able to run
make in the Neovim repo with no further modifications to my system than
upgrading the version of make I'm using to 4.4 or 4.4.1.
As the change is small enough, and it's unlikely that make version
around the world is going to be updated in a timely manner, it makes
sense to just add a workaround for this. Using `command -v` to resolve
the `cmake` command, similar to what is already being done with
`cmake3`, makes it work correctly in all cases. Continuing to include
`... || echo cmake` at the end means that if neither `cmake3` nor
`cmake` are installed, the user will still see a message about CMake
being missing.
Co-authored-by: Jake Zimmerman <zimmerman.jake@gmail.com>
**Problem:** Top-level anonymous nodes are not being checked by the
query linter
**Solution:** Check them by adding them to the top-level query
This commit also moves a table construction out of the match iterator so
it is run less frequently.
- Allow function command modifiers.
- Match function bodies starting with empty lines.
Command modifiers reported by @Konfekt.
fixesvim/vim#15671closes: vim/vim#1567435699f1749
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem:
Node.js provider (optional) ~
- ERROR Failed to run healthcheck for "provider.node" plugin. Exception:
…/runtime/lua/provider/node/health.lua:9: attempt to call field 'provider_disabled' (a nil value)
Perl provider (optional) ~
- ERROR Failed to run healthcheck for "provider.perl" plugin. Exception:
…/runtime/lua/provider/perl/health.lua:8: attempt to call field 'provider_disabled' (a nil value)
Python 3 provider (optional) ~
- ERROR Failed to run healthcheck for "provider.python" plugin. Exception:
…/runtime/lua/provider/python/health.lua:226: attempt to call field 'provider_disabled' (a nil value)
Ruby provider (optional) ~
- ERROR Failed to run healthcheck for "provider.ruby" plugin. Exception:
…/runtime/lua/provider/ruby/health.lua:9: attempt to call field 'provider_disabled' (a nil value)
Solution:
Add these files to the runtime sanity check.
fix#29302
Problem:
write() can return -1 but is cast to unsigned type causing coverity
to detect possible overflowed integer
Solution:
Perform check to ensure all negative values are captured rather than
just -1 before casting to unsigned type
Problem:
The default builtin UI client does not declare its client info. This
reduces discoverability and makes it difficult for plugins to identify
the UI.
Solution:
- Call nvim_set_client_info after attaching, as recommended by `:help dev-ui`.
- Also set the "pid" field.
- Also change `ui_active()` to return a count. Not directly relevant to
this commit, but will be useful later.
Problem:
It has long been a convention that references to the builtin terminal UI
should mention "tui", not "term", in order to avoid ambiguity vs the
builtin `:terminal` feature. The final step was to rename term.txt;
let's that step.
Solution:
- rename term.txt => tui.txt
- rename nvim_terminal_emulator.txt => terminal.txt
- `gen_help_html.lua`: generate redirects for renamed pages.
Problem: filetype: salt files are not recognized
Solution: Detect '*.sls' files as filetype salt,
include a syntax script (Gregory Anders)
closes: vim/vim#1568989b9bb4ac8
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem:
User cannot configure the tool used by `vim.ui.open` (or `gx`). With
netrw this was supported by `g:netrw_browsex_viewer`.
Solution:
Introduce `opts.cmd`. Users that want to set this globally can
monkey-patch `vim.ui.open` in the same way described at `:help vim.paste()`.
Fixes https://github.com/neovim/neovim/issues/29488
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Stop assigning by default the NonText highlighting group for
javaConceptKind modifiers since its colour is hardly
distinguishable from a background colour for a range of
colour schemes.
fixesvim/vim#15237
related vim/vim#15238closes: vim/vim#156645e95c8f637
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Co-authored-by: Dexter Gaon-Shatford <dexter@gaonshatford.ca>
Problem: inconsistent case sensitive extension matching
Solution: unify case sensitive extension matching (Evgeni Chasnovski).
There are different approaches of how extensions are matched with
respect to case sensitivity. In particular, '\c' flag is used in pattern
whereas in most places case sensitive matching is guarded behind
`has("fname_case")` condition.
Replace all instances of '\c' with an explicit case sensitive pattern
variants guarded by `has("fname_case")`. Strictly speaking, this is a
breaking change because only two (most common and prevailingly tested)
variants are now matched: upper first letter and upper all letters.
closes: vim/vim#1567259b089c9df
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Match Vim9 boolean and null literals in expression arguments of :if,
:elseif, :while and :return.
closes: vim/vim#156844d427d4cab
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem:
- "process" is often used as a verb (`multiqueue_process_events`), which
is ambiguous for cases where it's used as a topic.
- The documented naming convention for processes is "proc".
- `:help dev-name-common`
- Shorter is better, when it doesn't harm readability or
discoverability.
Solution:
Rename "process" => "proc" in all C symbols and module names.
This module is generally used by any tests that need the full Nvim TUI
instead of `screen.lua`. Thus it should live in `functional/` instead of
in `functional/terminal/`.
Problem: heap-use-after-free in garbage collection with location list
user data.
Solution: Mark user data as in use when no other window is referencing
the location list (zeertzjq)
fixes: neovim/neovim#30371closes: vim/vim#15683be4bd189d2
Problem: Crash with cursor-screenline and narrow window
(elig0n)
Solution: Don't set right_col when width2 is 0 (zeertzjq).
fixes: vim/vim#15677closes: vim/vim#1567859149f0269
Problem: Wrong cursor-screenline when resizing window
Solution: Invalidate saved left_col and right_col when width1 or width2
change.
closes: vim/vim#1567986dc4f8b43
Problem:
The LSP omnifunc can insert nil bytes, which when read in other places
(like semantic token) could cause an error:
semantic_tokens.lua:304: Vim:E976: Using a Blob as a String
Solution:
Use `#line` instead of `vim.fn.strlen(line)`. Both return UTF-8 bytes
but the latter can't handle nil bytes.
Completion candidates can currently insert nil bytes, if other parts of
Alternative fix to https://github.com/neovim/neovim/pull/30359
Note that https://github.com/neovim/neovim/pull/30315 will avoid the
insertion of nil bytes from the LSP omnifunc, but the change of this PR
can more easily be backported.
This will ensure automatic backports created by the backport action does
not request reviewers (since the commit in question has already been
vetted and merged), but manual backports created by users does request
reviewers as these commits has not been vetted previously.
**Problem:** `vim.treesitter.get_parser` will throw an error if no parser
can be found.
- This means the caller is responsible for wrapping it in a `pcall`,
which is easy to forget
- It also makes it slightly harder to potentially memoize `get_parser`
in the future
- It's a bit unintuitive since many other `get_*` style functions
conventionally return `nil` if no object is found (e.g. `get_node`,
`get_lang`, `query.get`, etc.)
**Solution:** Return `nil` if no parser can be found or created
- This requires a function signature change, and some new assertions in
places where the parser will always (or should always) be found.
- This commit starts by making this change internally, since it is
breaking. Eventually it will be rolled out to the public API.
Ensure that the function `pick_call_hierarchy_item` correctly handles
the case where `call_hierarchy_items` is nil or an empty table. This
prevents potential errors when the function is called with no items.
By default spell checking is enabled for all text, but adding
`contains=@Spell` to syntax rules restricts spell checking to those
syntax rules. See `:help spell-syntax` for full details.
Variable names and headers are far more likely than comments to contain
spelling errors, so only enable spell checking in comments.
Introduced in https://github.com/xuhdev/syntax-dosini.vim/pull/8
cc @tobinjt
closes: vim/vim#15655c0982f9f79
Co-authored-by: John Tobin <johntobin@johntobin.ie>
Previously these would be cached in buffer-local variables and
would not change on :compiler pandoc
closes: vim/vim#15642d30ffdca49
Co-authored-by: Christian Brabandt <cb@256bit.org>
Groff MOM (Macros for Manuscripts) is a macro package for the GNU
troff (groff) typesetting system, a light-weight alternative
to LaTeX for professional-quality documents.
closes: vim/vim#156467cc0e9145d
Co-authored-by: Konfekt <Konfekt@users.noreply.github.com>
Problem: too many strlen() calls in option.c
Solution: refactor the code to reduce the number of strlen() calls
(John Marriott)
closes: vim/vim#1560495dacbb5fd
Co-authored-by: John Marriott <basilisk@internode.on.net>
Skipped importing the following unit tests from libtermkey as they'd
require introducing a lot of unused code or require more effort to port
than is probably worth:
- 05read
- 12strpkey
- 20canon
- 40ti-override
Problem:
The name `os_inchar` (from Vim's old `mch_inchar`) is ambiguous:
"inchar" sounds like it could be reading or enqueuing (setting) input.
Its docstring is also ambiguous.
Solution:
- Rename `os_inchar` to `input_get`.
- Write some mf'ing docstrings.
- Add assert() in TRY_READ().
Problem:
str_utfindex_enc could return an error if the index was longer than the
line length. This was handled in each of the calls to it individually
Solution:
* Fix the call at the source level so that if the index is higher than
the line length, utf length is returned
Problem:
floating windows did not correctly inherit the NormalFloat highlight
group from the global namespace when it was not defined in the window-specific
namespace. This led to floating windows losing their background highlight when
switching between namespaces.
Solution:
Updated the window highlight logic in update_window_hl() to handle the fallback.
This fix resolves issues with floating window backgrounds not displaying as expected
in certain namespace configurations.
$NVIM_LOG_FILE: /Users/runner/work/neovim/neovim/build/.nvimlog
WRN 2024-09-08T21:48:13.279 ?.21134 vim_mktempdir:3281: $TMPDIR tempdir not a directory (or does not exist): TMPDIR-should-be-ignored
WRN 2024-09-08T21:48:13.312 ?.21137 vim_mktempdir:3281: $TMPDIR tempdir not a directory (or does not exist): TMPDIR-should-be-ignored
- `alter_slashes` belongs in `testutil.lua`, not `testnvim.lua`.
- `alter_slashes` is an unusual name. Rename it to `fix_slashes`.
- invert its behavior, to emphasize that `/` slashes are the preferred,
pervasive convention, not `\` slashes.
Problem:
If $NVIM_APPNAME is a relative dir path, Nvim fails to start its
primary/default server, and `v:servername` is empty.
Root cause is d34c64e342, but this wasn't
noticed until 96128a5076 started reporting the error more loudly.
Solution:
- `server_address_new`: replace slashes "/" in the appname before using
it as a servername.
- `vim_mktempdir`: always prefer the system-wide top-level "nvim.user/"
directory. That isn't intended to be specific to NVIM_APPNAME; rather,
each *subdirectory* ("nvim.user/xxx") is owned by each Nvim instance.
Nvim "apps" can be identified by the server socket(s) stored in those
per-Nvim subdirs.
fix#30256
Problem: vim.tbl_deep_extend had an undocumented feature where arrays
(integer-indexed tables) were not merged but compared literally (used
for merging default and user config, where one list should overwrite the
other completely). Turns out this behavior was relied on in quite a
number of plugins (even though it wasn't a robust solution even for that
use case, since lists of tables (e.g., plugin specs) can be array-like
as well).
Solution: Revert the removal of this special feature. Check for
list-like (contiguous integer indices) instead, as this is closer to the
intent. Document this behavior.
Problem:
$XDG_RUNTIME_DIR may be broken on WSL, which prevents starting (and even
building) Nvim. #30282
Solution:
- When startup fails, mention the servername in the error message.
- If an autogenerated server address fails, log an error and continue
with an empty `v:servername`. It's only fatal if a user provides a bad
`--listen` or `$NVIM_LISTEN_ADDRESS` address.
Before:
$ nvim --headless --listen ./hello.sock
nvim: Failed to --listen: "address already in use"
$ NVIM_LISTEN_ADDRESS='./hello.sock' ./build/bin/nvim --headless
nvim: Failed to --listen: "address already in use"
After:
$ nvim --headless --listen ./hello.sock
nvim: Failed to --listen: address already in use: "./hello.sock"
$ NVIM_LISTEN_ADDRESS='./hello.sock' ./build/bin/nvim --headless
nvim: Failed $NVIM_LISTEN_ADDRESS: address already in use: "./hello.sock"
Problem:
str_byteindex_enc could return an error if the index was longer than the
lline length. This was handled in each of the calls to it individually
Solution:
* Fix the call at the source level so that if the index is higher than
the line length, line length is returned as per LSP specification
* Remove pcalls on str_byteindex_enc calls. No longer needed now that
str_byteindex_enc has a bounds check.
Font-family names must be enclosed in quotation marks to ensure that
fonts are applied correctly when there are spaces in the name.
Fix an issue where multiple fonts specified in `vim.o.guifont` are
inserted as a single element, treating them as a single font.
Support for escaping commas with backslash and ignoring spaces
after a comma.
ref `:help 'guifont'`
while at it, also move the note about :wincmd
directly to :h :wincmd, it doesn't seem to belong to the buffer section.
closes: vim/vim#15636b584117b05
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong breakindentopt=list:-1 with multibyte chars or TABs in
text matched by 'formatlistpat' (John M Devin)
Solution: Use the width of the match text (zeertzjq)
fixes: vim/vim#15634closes: vim/vim#1563561a6ac4d00
Problem: Resetting cell widths can make 'listchars' or 'fillchars'
invalid.
Solution: Check for conflicts when resetting cell widths (zeertzjq).
closes: vim/vim#1562966f65a46c5
Problem: Unnecessary nextcmd NULL checks in parse_command_modifiers().
Solution: Remove them (zeertzjq)
Every place parse_command_modifiers() is called, nextcmd is NULL, and
after it's set to non-NULL the function returns very soon.
Even if one day nextcmd may be non-NULL, the NULL checks may still be
wrong as the correct behavior may be overriding nextcmd.
closes: vim/vim#15620f7b8609446
Termkey is abandoned and it's now our code, so there's no reason not to
treat it as such. An alternative approach could be to have a proper repo
that we maintain such as with unibilium, although with this approach we
can make a few assumptions that will allow us to remove more code.
Also eliminate duplicate code from both termkey and libvterm.
Problem:
Since 96128a5076 the test logs have noise from tests that *expect*
failures:
$NVIM_LOG_FILE: /tmp/cirrus-ci-build/build/.nvimlog
(last 100 lines)
ERR 2024-09-04T13:38:45.181 T949.28335.0/c terminfo_start:486: uv_pipe_open failed: no such device or address
ERR 2024-09-04T13:38:45.181 T949.28335.0/c flush_buf:2527: uv_write failed: bad file descriptor
ERR 2024-09-04T13:38:45.181 T949.28335.0/c flush_buf:2527: uv_write failed: bad file descriptor
WRN 2024-09-04T13:43:43.294 ?.35904 server_start:173: Failed to start server: address already in use: /…/Xtest_tmpdir/…/T7159.35895.0
WRN 2024-09-04T13:43:43.314 ?.35907 server_start:173: Failed to start server: illegal operation on a directory: /
ERR 2024-09-04T13:43:43.332 ?.35909 socket_watcher_init:60: Host lookup failed: https://example.com
Solution:
Rewrite the test to use `vim.system()`. Set NVIM_LOG_FILE in the child
process to a "throwaway" logfile.
Problem: Marktree meta count still includes invalidated marks, making
guards that check the meta total ineffective.
Solution: Revise marktree metadata when in/revalidating a mark.
- The exclusion of lists was never justified in the commit history and is
the wrong thing to do for a function that deals with tables.
- Move the error checks out of the recursive path.
Fixes#23654
Problem: Newline causes E749 in Ex mode (after 9.1.0573).
Solution: Don't execute empty command followed by a newline.
closes: vim/vim#156142432b4a753
Cherry-pick code change from patch 8.2.3405.
Updated the `rpc.connect` function to support connecting to LSP servers
using hostnames, not just IP addresses. This change includes updates to
the documentation and additional test cases to verify the new
functionality.
- Modified `connect` function to resolve hostnames.
- Updated documentation to reflect the change.
- Added test case for connecting using hostname.
Added a TCP echo server utility function to the LSP test suite. This
server echoes the first message it receives and is used in tests to
verify LSP server connections via both IP address and hostname.
Refactored existing tests to use the new utility function.
Problem:
crash when calling nvim_buf_get_text() with a large negative start_col:
call nvim_buf_get_text(0, 0, -123456789, 0, 0, {})
Solution:
clamp start_col after subtracting it from the line length.
Problem:
137f98cf64 added the `create` parameter to `tmpname()` but didn't
fully implement it.
Solution:
- Update impl for the `os.tmpname()` codepath.
- Inspect all usages of `tmpname()`, update various tests.
Problem:
`nvim --listen` does not error on EADDRINUSE. #30123
Solution:
Now that `$NVIM_LISTEN_ADDRESS` is deprecated and input *only* (instead
of the old, ambiguous situation where it was both an input *and* an
output), we can be fail fast instead of trying to "recover". This
reverts the "recovery" behavior of
704ba4151e, but that was basically
a workaround for the fragility of `$NVIM_LISTEN_ADDRESS`.
This will fix the following error when using generators that have a
space in them, e.g. "Unix Makefiles":
"CMake Error: Could not create named generator Unix".
Closes https://github.com/neovim/neovim/issues/30218.
Some sequences beginning with ASCII might be rendered as emoji, as for
instance emoji 1️⃣ which is encoded as ascii 0x31 + U+FE0F + U+20E3.
While it is tricky to make the width of such sequences configurable,
we can make TUI be careful with such sequences and reset the cursor,
just like for Extended_Pictogram based sequences.
- Match -addr and -keepscript attributes and generate -addr values.
- Match attribute errors where = is specified.
- Highlight attributes with Special like other Ex command options.
- Don't highlight user-specified completion function args.
- Match :delcommand -buffer attribute.
closes: vim/vim#155863c07eb0c67
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Recognize colon-delimited second part of Runas_Spec that specifies
permitted groups, e.g.:
alan ALL = (root, bin : operator, system) ALL
This implementation is sloppy because it accepts any amount of colons
delimiting further Runas_Lists, but for now that's better than bailing
out completely as soon as a colon is encountered (esp. given that the
default sudoers uses these colons, breaking highlighting OOTB).
Also, while at it, make Vim recognize all Tag_Spec items, not just
{,NO}PASSWD
closes: vim/vim#15607bd69b39514
Co-authored-by: Christian Brabandt <cb@256bit.org>
For context, see https://github.com/neovim/neovim/pull/24738. Before
that PR, Nvim did not correctly handle captures with quantifiers. That
PR made the correct behavior opt-in to minimize breaking changes, with
the intention that the correct behavior would eventually become the
default. Users can still opt-in to the old (incorrect) behavior for now,
but this option will eventually be removed completely.
BREAKING CHANGE: Any plugin which uses `Query:iter_matches()` must
update their call sites to expect an array of nodes in the `match`
table, rather than a single node.
Problem: Window is updated with potentially invalid skipcol in recursive
window update path. I.e. cursor outside of visible range in
large line that does not fit.
Solution: Make sure it is valid (Luuk van Baal).
3d5065fc75
Problem: inserting with a count is inefficient
Solution: Disable calculation of the cursor position and topline, if a
count has been used (Ken Takata)
Optimize insertion when using :normal 10000ix.
This patch optimizes the insertion with a large count (e.g. `:normal
10000ix`).
It seems that calculation of the cursor position for a long line is slow
and it takes O(n^2). Disable the calculation if not needed.
Before:
```
$ time ./vim --clean -c 'normal 10000ix' -cq!
real 0m1.879s
user 0m1.328s
sys 0m0.139s
$ time ./vim --clean -c 'normal 20000ix' -cq!
real 0m5.574s
user 0m5.421s
sys 0m0.093s
$ time ./vim --clean -c 'normal 40000ix' -cq!
real 0m23.588s
user 0m23.187s
sys 0m0.140s
```
After:
```
$ time ./vim --clean -c 'normal 10000ix' -cq!
real 0m0.187s
user 0m0.046s
sys 0m0.093s
$ time ./vim --clean -c 'normal 20000ix' -cq!
real 0m0.217s
user 0m0.046s
sys 0m0.108s
$ time ./vim --clean -c 'normal 40000ix' -cq!
real 0m0.278s
user 0m0.093s
sys 0m0.140s
$ time ./vim --clean -c 'normal 80000ix' -cq!
real 0m0.494s
user 0m0.311s
sys 0m0.140s
$ time ./vim --clean -c 'normal 160000ix' -cq!
real 0m1.302s
user 0m1.140s
sys 0m0.094s
```
closes: vim/vim#1558809b80d23cf
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: [security]: invalid cursor position may cause a crash
(after v9.1.0038)
Solution: Set cursor to the last character in a line, if it would
otherwise point to beyond the line; no tests added, as it
is unclear how to reproduce this.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-4ghr-c62x-cqfh396fd1ec29
Co-authored-by: Christian Brabandt <cb@256bit.org>
Using powershell as the default windows shell as using cmd alters $PATH
in a way that makes building neovim fail (powershell prioritizes visual
studio tools which is arguably more correct).
This was tested with gnu make for windows, which can be installed with
e.g. scoop. It does not work with nmake and it is extremely unlikely we
want to add nmake support as the makefile is merely supposed to be
syntactic sugar for the most common case. For similar reasons, the only
supported generator is ninja.
Problem: completion is inserted on Enter with "noselect"
(Carman Fu)
Solution: check noselect before update compl_shown_match
(glepnir)
fixes: vim/vim#15526closes: vim/vim#15530753794bae8
To check for a non-ASCII character, the condition should be >= 0x80, not
> 0x80. In this case it doesn't really matter as the 0x80 character is
unprintable and occupies 4 cells, but still make it consistent.
Problem: Behavior of Enter in completion depends on typing speed.
Solution: Don't make whether Enter selects original text depend on
whether completion has been interrupted, which can happen
interactively with a slow completion function.
Problem: prefix can be a symbol like period, the fuzzy matching can't
handle it correctly.
Solution: when prefix is empty or a symbol add all lsp completion
result into matches.
Use the grapheme break algorithm from utf8proc to support grapheme
clusters from recent unicode versions.
Handle variant selector VS16 turning some codepoints into double-width
emoji. This means we need to use ptr2cells rather than char2cells when
possible.
Improving syntax highlighting by allowing numbers, - and a $ as suffix
in user constants and by allowing hwConstants in If-Then statements
closes: vim/vim#1505987c01d9561
Co-authored-by: Tom Crecelius <holly@net-eclipse.net>
Problem: completion items can now have dedicated highlighting (through
`hl_group` and `kind_hlgroup` fields). Both of the fields combine
their highlight attributes with the underlying `PmenuXxx` group.
As default color scheme `Pmenu` and `PmenuSel` are intentionally
almost inverted versions of one another, the added highlighting will
be unreadable in one of them if done only through foreground (which is
the most convenient way for users and being able to do so is arguably
the biggest benefit of actually combining added highlighting).
Solution: adjust `PmenuSel` to utilize `attr=reverse`. This works
because `fg`/`bg` are first combined and only then reversed. This
results in a colored background for items with `hl_group` and
`kind_hlgroup` using text highlighting.
This also results in the same background for regular selected item,
while intentionally changing foreground from `Nvim{Light,Dark}Grey3`
to (essentially) `Nvim{Light,Dark}Grey2`. This both provides better
contrast ratio and does not need realigning of the whole block.
Problem:
Things like underlines are always given a default foreground highlight
regardless of the value of `sp`.
Solution:
Check for `sp` first, and apply that color to the text decoration color if it
exists.
Limitations:
If there is no value of `sp`, vim applies a text decoration color that matches
the foreground of the text. This is still not implemented (and seems like a much
more complex problem): in TOhtml, the underline will still be given a default
foreground highlight.
Problem: "dvgo" is not always an inclusive motion
(Iain King-Speir)
Solution: initialize the inclusive flag to false
fixes: vim/vim#15580closes: vim/vim#15582f8702aeb8f
Co-authored-by: Christian Brabandt <cb@256bit.org>
This reverts commit 7f6ff829aa.
The given reasoning and usecase is unsatisfactory. While it is true that
it allows to run `make build/bin/nvim`, it can easily be recreated with
`ninja -C build bin/nvim` which does the exact same thing. This minor
convenience is not worth adding the extra code given how rare this
usecase should be.
Introduce a new API variable "g:java_syntax_previews" whose
value must be a list of syntax preview feature numbers.
Enumerate the currently supported numbers in a table at the
end of the documentation entry for "ft-java-syntax".
Also, disable the recognition of String Templates. Despite
the withdrawal of this preview feature in its proposed form
from the upcoming JDK 23 release and the fact that the JDK
22 release is coming to EOL this September, an earlier
iteration of this preview feature was included in JDK 21
(LTS) whose EOL is projected to fall due in late 2028 and,
therefore, retain the current implementation.
Define "g:java_syntax_previews" and include number 430 in
its list to enable the recognition of String Templates:
------------------------------------------------------------
let g:java_syntax_previews = [430]
------------------------------------------------------------
References:
https://openjdk.org/jeps/430 (Preview)
https://openjdk.org/jeps/459 (Second Preview)
https://openjdk.org/jeps/465 (Third Preview)
https://mail.openjdk.org/pipermail/amber-spec-experts/2024-April/004106.htmlcloses: vim/vim#155798556e23ee9
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: Installing treesitter parser is hard (harder than
climbing to heaven).
Solution: Add optional support for wasm parsers with `wasmtime`.
Notes:
* Needs to be enabled by setting `ENABLE_WASMTIME` for tree-sitter and
Neovim. Build with
`make CMAKE_EXTRA_FLAGS=-DENABLE_WASMTIME=ON
DEPS_CMAKE_FLAGS=-DENABLE_WASMTIME=ON`
* Adds optional Rust (obviously) and C11 dependencies.
* Wasmtime comes with a lot of features that can negatively affect
Neovim performance due to library and symbol table size. Make sure to
build with minimal features and full LTO.
* To reduce re-compilation times, install `sccache` and build with
`RUSTC_WRAPPER=<path/to/sccache> make ...`
Problem: The matchparen plugin is slow on a long line.
Solution: Don't use a regexp to get char at and before cursor.
(zeertzjq)
Example:
```vim
call setline(1, repeat(' foobar', 100000))
runtime plugin/matchparen.vim
normal! $hhhhhhhh
```
closes: vim/vim#1556881e7513c86
Problem: Wrong patlen value in ex_substitute() (after 9.1.0426).
Solution: Compute patlen after finding end separator.
(zeertzjq)
Add a more explicit test. The test already passes as the only case
where a overlarge patlen value matters was fixed by patch 9.1.0689.
closes: vim/vim#15565d1c8d2de4b
Problem: cannot set special highlight kind in popupmenu
Solution: add kind_hlgroup item to complete function
(glepnir)
closes: vim/vim#1556138f99a1f0d
Co-authored-by: glepnir <glephunter@gmail.com>
Match :loadkeymap after Ex colons and bars.
Don't generate :loadkeymap as it is matched with a custom syntax group.
closes: vim/vim#155547866d54ecc
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
The end marker is not required to match the indent of :let when "trim"
is specified, it may also appear without leading whitespace as normal.
closes: vim/vim#155647884cc7418
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
* Improve heredoc handling
- Support "trim" for all the embedded scripts.
- Check the indent of "trim" for "let" and all the embedded scripts.
* Update missing part of vim.vim.base in the commit
d164f2a521f8e52e587727657fb1c19e9a25f32a.
* Update gen_syntax_vim.vim to catch up with 9.1.0685's source code.
closes: vim/vim#1554295e90781a4
Co-authored-by: Ken Takata <kentkt@csc.jp>
- Obtain and pass through translated messages with this
function.
- If "g:java_foldtext_show_first_or_second_line" is defined,
assign this function to &foldtext.
closes: vim/vim#155492750b83fa1
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: Some items of completion results include function signatures that can
cause the pum to be very long when a function has many params, because pum
scales with the longest word/abbr.
Solution: add custom covert function that can customise abbr to remove params.
Problem: the autotrigger mechanism could fire completion requests despite
completion already being active from another completion mechanism or manual
trigger
Solution: add a condition to avoid an additional request.
Problem: mode() returns wrong value with <Cmd> mapping
Solution: Change decision priority of VIsual_active and move
visual mode a bit further down (kuuote)
closes: vim/vim#155330fd1cb1b1f
Co-authored-by: kuuote <znmxodq1@gmail.com>
Problem: zip-plugin has problems with special characters
(user202729)
Solution: escape '*?[\' on Unix and handle those chars
a bit differently on MS-Windows, add a test, check
before overwriting files
runtime(zip): small fixes for zip plugin
This does the following:
- verify the unzip plugin is executable when loading the autoload plugin
- handle extracting file names with '[*?\' in its name correctly by
escaping those characters for the unzip command (and handle those
characters a bit differently on MS-Windows, since the quoting is different)
- verify, that the extract plugin is not overwriting a file (could cause
a hang, because unzip asking for confirmation)
- add a test zip file which contains those special file names
fixes: vim/vim#15505closes: vim/vim#155197790ea0c68
Co-authored-by: Christian Brabandt <cb@256bit.org>
- It's clear that :s and :& are Ex commands, so remove "command" along
with the duplicate "the".
- Use "or" instead of "and" following "without".
closes: vim/vim#15527e44e64492c
Problem:
The headings and help tags overlap when browsing the docs in neovim.io/doc/user/ from a mobile phone.
Solution:
Apply the correct CSS rules so that the headings and help tags wrap
nicely below one another.
Upon `terminal_enter`, `mapped_ctrl_c` is set in order to avoid `CTRL-C`
interrupts (which is proxied to the terminal process instead), `os_inchar`
will then test `mapped_ctrl_c` against `State` and set `ctrl_c_interrupts=false`
which prevents `process_ctrl_c` from setting `got_int=true` in a terminal
state.
However, if `got_int` is set outside of `process_ctrl_c`, e.g. via
`interrupt()`, this will hang the neovim process as `terminal_execute` will
enter an endless loop as `got_int` will never be cleared causing `safe_vgetc`
to always return `Ctrl_C`.
A minimal example reproducing this bug:
```vim
:autocmd TermEnter * call timer_start(500, {-> interrupt()})
:terminal
:startinsert
```
To fix, we make sure `got_int` is cleared inside `terminal_execute` when
it detects `Ctrl_C`.
Closes#20726
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
When a C0 character is present in an OSC terminator (i.e. after the ESC
but before a \ (0x5c) or printable character), vterm executes the
control character and resets the current string fragment. If the C0
character is the final byte in the sequence, the string fragment has a
zero length. However, because the VT parser is still in the "escape"
state, vterm attempts to subtract 1 from the string length (to account
for the escape character). When the string fragment is empty, this
causes an underflow in the unsigned size variable, resulting in a buffer
overflow.
The fix is simple: explicitly check if the string length is non-zero
before subtracting.
Lua's string.byte has a maximum (undocumented) allowable length, so
vim.text.hencode fails on large strings with the error "string slice too
long".
Instead of converting the string to an array of bytes up front, convert
each character to a byte one at a time.
Otherwise, if the executable to be verified does not exist,
this would cause a false-positive in the 'IsSafeExecutable()' check,
because 'exepath(executable)' returns an empty string and
'fnamemodify('', ':p:h')' returns the current directory and as a result
the 'IsSafeExecutable()' returns false (for the wrong reason).
8e25d91cb7
Co-authored-by: Christian Brabandt <cb@256bit.org>
- all: PMenuMatch and PMenuMatchSel for 8c/16c
- habamax:
- revert VertSplit to solid background color
- remove gitCommitSummary link to Title
- make TabLineFill same as StatuslineNC
closes: vim/vim#155066908db4756
Co-authored-by: Maxim Kim <habamax@gmail.com>
It's a personal annoyance for me. I have to edit yaml files on a lot of
customer environments and whenever you type '#' at the start of the
line, the commented line will be indented by whatever indent the
previous line had.
I hate this seriously, because it makes un-commenting painful. So let's
fix this. But instead of messing with the indent function, let's just
remove the '0#' from cinkeys, so that Vim won't perform re-indenting
when commenting out such a yaml file.
closes: vim/vim#15494c6ed816761
Co-authored-by: Christian Brabandt <cb@256bit.org>
Closing parentheses were often highlighted as errors.
Add a syntax sync command to reduce the error.
Also fix that `defined` was not highlighted as an operator inside
parentheses. E.g.:
```
if defined foo (
if defined bar (
...
)
)
```
The first `defined` was highlighted but the second one was not.
related: vim/vim#1545311c92be897
Co-authored-by: Ken Takata <kentkt@csc.jp>
The end marker must appear on line of its own without any trailing
whitespace.
Whitespace is incorrectly allowed before all end markers. Limiting this
only to heredocs where "trim" was specified, and with the correct
indent, is currently an intractable problem given that contained syntax
groups (in this case :let) cannot be limited to start patterns.
Highlight interpolated expressions when "eval" is specified.
cloess: vim/vim#15511d164f2a521
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: :keeppatterns does not retain the substitute pattern
for a :s command
Solution: preserve the last substitute pattern when used with the
:keeppatterns command modifier (Gregory Anders)
closes: vim/vim#154973b59be4ed8
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Rename from w_closing to w_locked is incomplete
(after 9.1.0678).
Solution: Rename remaining occurrences of w_closing to w_locked and
update comments (zeertzjq).
closes: vim/vim#15504bc11f6d9d4
Problem: [security]: use-after-free in alist_add()
(SuyueGuo)
Solution: Lock the current window, so that the reference to
the argument list remains valid.
This fixes CVE-2024-43374
0a6e57b09b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: In line 308 the poem appears as
✅1) Roses are red,
✅2) Mud is fun,
✅3) Violets are blue,
✅4) I have a car,
✅5) Clocks tell time,
✅6) Sugar is sweet
✅7) And so are you.
where the wrong lines (2, 4, 5) are all marked as correct.
Solution: Change the tutor.json file so that initially the poem appears
as
✅1) Roses are red,
❌2) Mud is fun,
✅3) Violets are blue,
❌4) I have a car,
❌5) Clocks tell time,
❌6) Sugar is sweet
✅7) And so are you.
The method for checking whether a line is correct or not is really
simple, so I couldn't find a way to display the 6th line as initially
correct, however upon deleting lines 2, 4 and 5 the final result shows
line 6 as correct.
It addresses the following issues:
- Fix highlight of let and var javascript keywords
According to runtime/doc/syntax.txt, Identifier is for variable names.
let/var are not variable names, they are keywords
- Add highlighting for "from" keyword in javascript
- Fix highlight of function keyword in javascript
According to docs, Function is for function names, so the function
keyword should just be Keyword.
- Fix highlight of static keyword in javascript
According to vim docs: StorageClass static, register, volatile, etc.
closes: vim/vim#15480ea76096fa9
Problem:
The windows installer did not have the AllUsers property which leads to
the installer being misidentified as per user installer.
Currently the installer already requires administrative privileges and
installs into the system-wide ProgramFiles directory, but the start menu
entry and uninstaller registration are created only for the current user.
Issue: #29885https://cmake.org/cmake/help/latest/cpack_gen/wix.html#variable:CPACK_WIX_INSTALL_SCOPE
Solution:
With setting CPACK_WIX_INSTALL_SCOPE to "perMachine" the generated msi
installer includes the Property ALLUSERS=1.
Additionally the start menu entries and uninstaller registration will be
created for all users.
Problem: marker folds may get corrupted on undo (Yousef Mohammed)
Solution: when adjusting folds, make sure that line1 is the lower limit
and line2 is the upper line limit. In particular, line2 should
not be able to get smaller than line1.
fixes: vim/vim#15455closes: vim/vim#154668d02e5cf96
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Contents of terminal buffer are not reflown when Nvim is
resized.
Solution: Enable reflow in libvterm by default. Now that libvterm is
vendored, also fix "TUI rapid resize" test failures there.
Note: Neovim's scrollback buffer does not support reflow (yet), so lines
vanishing into the buffer due to a too small window will be restored
without reflow.
Problem: Adding support for modern Nvim features (reflow, OSC 8, full
utf8/emoji support) requires coupling libvterm to Nvim internals
(e.g., utf8proc).
Solution: Vendor libvterm at v0.3.3.
Problem: Some other options reset curswant unnecessarily when set.
(Andrew Haust)
Solution: Don't reset curswant when setting 'comments', 'commentstring'
or 'define' (zeertzjq)
fixes: vim/vim#15462closes: vim/vim#15467b026a293b1
According to :h win32-PATH, "the same directory as Vim" means the same
directory as the Vim executable, not Vim's current directory. In patch
8.2.4860 these two concepts were mixed up.
closes: vim/vim#154510cc5dce578
Problem: Error when the drive of the swap file was disconnected.
Solution: Try closing and re-opening the swap file. (closesvim/vim#4378)
b58a4b938c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Renaming a buffer on startup may cause using freed memory.
Solution: Check if the buffer is used in a window. (closesvim/vim#8955)
d3710cf01e
Cherry-pick Test_echo_true_in_cmd() from Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: When preparing the parameters for a code actions LSP request,
the code set `context.diagnostics` when processing the first LSP client,
and then reused those `context.diagnostics` for subsequent LSP clients.
This meant that the second and next LSP clients got diagnostics that
did not originate from them, and they did not get the diagnostics that
they sent.
Solution: Avoid setting `context.diagnostics` (which is referenced by
all clients). Instead, set `params.context.diagnostics` directly, which
is specific to a single client.
Fixes#30001
Caused by #29501
According to `CaseFolding-15.1.0.txt`, full casefolding should be
preferred over simple casefolding as it's considered to be more correct.
Since utf8proc already provides full casefolding it makes sense to
switch to it. This will also remove a lot of unnecessary build code.
Temporary exceptions are made for two sets characters:
- `ß` will still be considered `ß` (instead of `ss`) as using a full
casefolding requires interfering with upstream spell files in some
form.
- `İ` will still be considered `İ` (instead of `i̇`) as using full
casefolding requires making a value judgement on the "correct"
behavior. There are two, equally valid case-insensetive comparison for
this character according to unicode. It is essentially up to the
implementor to decide which conversion is correct. For this reason it
might make sense to allow users to decide which conversion should be
done as an added option to `casemap` in a future PR.
Problem: Code related to findfile() is spread out.
Solution: Put findfile() related code into a new source file. (Yegappan
Lakshmanan, closesvim/vim#3934)
5fd0f5052f
Keep functions related to wildcard expansion in path.c, as in Vim they
are now spread out among multiple files, which isn't really ideal.
Problem: tests: zip test still resets 'shellslash' option
Solution: Remove resetting the 'shellslash' option, the zip
plugin should now be able to handle this options
closes: vim/vim#1543491efcd115e
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: RestoreOpts() plugin called too often
Solution: use :defer to have the RestoreOpts() function
called when the function returns automatically
afea6b9468
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: the zip plugin duplicates a lot of code for displaying
warnings/errors
Solution: refactor common code into a generic Mess() function
8d52926857
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: zip plugin has no way to set/restore option values
Solution: Add the SetSaneOpts() and RestoreOpts() functions,
so options that cause issues are set to sane values
and restored back to their initial values later on.
(this affects the 'shellslash' option on windows, which also
changes how the shellescape() function works)
19636be55e
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: zip plugin tests for fnameescape() function
Solution: Remove the check, fnameescape() has been available since
7.1.299, it should nowadays always be available
33836d38b8
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: zip plugin uses :echo which does not store messages
Solution: use :echomsg instead of :echo so that messages are stored in
the message history
120c0dd815
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: zip plugin contains a lot of comments from the decho plugin
Solution: Clean up and remove un-used comments
a63f66e953
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: filecopy() may return wrong value when readlink() fails.
Solution: Set ret to -1 so that 0 is returned when readlink() fails.
(zeertzjq)
closes: vim/vim#15438da090f95df
In Vim a lot of filesystem functions have been moved to filepath.c.
However, some of these functions actually deal with file contents, and
Nvim's filesystem-related functions are spread out in a different way.
Therefore, it's better to use a different file for these functions.
Problem: Cannot browse zipfiles with the unzip program found
on FreeBSD.
Solution: Adjust command arguments.
Unzip found on FreeBSD complain about missing argument with the
zipinfo modifier '-Z -1'. Joining arguments seems to work
for both implementations.
Also change `:sil!` to `:sil` so that error messages are properly
reported (per review of Christian Brabandt).
related: vim/vim#15411f0e9b72c8f
Co-authored-by: Damien <141588647+xrandomname@users.noreply.github.com>
* do not capitalize after a double colon when introducing a list
* Capitalize a header line
closes: vim/vim#15433217d3c17c6
Co-authored-by: Christian Brabandt <cb@256bit.org>
Since #29315 we are also preprocessing header files in order to find
functions which need prototype declarations. gcc emits a spurious
"warning: #pragma once in main file" even when when you are just
using `gcc -E` which causes a bit of noise in compiler output.
As a workaround, surpress all warnings for this step, this should be pretty
much harmless as we will still get preprocessor warnings when doing
actual compilation `gcc -c` later.
reference: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=89808
This also makes shada reading slightly faster due to avoiding
some copying and allocation.
Use keysets to drive decoding of msgpack maps for shada entries.
Problem:
- Current lua indentexpr does not indent for '(' ')'.
- Missing indent test for lua.
Solution:
- Match '(', ')' in `function GetLuaIndentIntern`.
- Add an indent test for lua.
closes: vim/vim#15364c0f7505ede
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: After 6f1cbfc9ab fnameescape()
is no longer called on the name of the file to be extracted.
However, while spaces indeed don't need to be escaped, unzip
treats '[' as a wildcard character, so it need to be escaped.
Solution: Escape '[' on both MS-Windows and Unix.
From the docs it seems '*' and '?' also need escaping, but they seem to
actually work without escaping.
fixes: neovim/neovim#29977closes: vim/vim#15427c5bdd66558
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Magenta background Todo is too bright and might interfere with DiffText.
Make it less strong, without background, bold.
closes: vim/vim#154236228481b8e
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: some patterns are used as a replacement for several explicit
extension matches (like '%.[Ss][Yy][Ss]$', '%.php%d$', etc.).
They usually correspond to Vim's "ignore case" regexes (like
'*.sys\c') and "convenience" patterns to not define many of them (like
'*.php\d').
As matching extension directly is faster and more explicit, it should
be preferred.
Solution: move all such patterns to direct extension match.
Problem: some patterns are used as a replacement for one-two explicit
file matches (like '^[mM]akefile$'). As matching file name directly is
faster and more explicit, it should be preferred.
Solution: move those patterns to direct file name match.
NOTE: this is not strictly backwards compatible, because exact file
name matching is done *before* pattern matching. If user has
conflicting `vim.filetype.add()` call with high priority (like with
`pattern='file$'` and `priority=100`), after this change it will be
ignored (i.e. 'makefile' will match exactly).
Judging by converted cases, it seems reasonable to prefer exact
matches there.
- common_function() has always been in evalfunc.c in Vim
- return_register() has always been in evalfunc.c in Vim
- get_user_input() was moved to ex_getln.c in Vim 8.1.1957
- tv_get_lnum_buf() was moved to typval.c in Vim 8.2.0847
Problem: filetype: goaccess config file not recognized
Solution: detect 'goaccess.conf' as goaccess filetype, also
include a basic syntax and ftplugin (Adam Monsen)
Add syntax highlighting for GoAccess configuration file.
GoAccess is a real-time web log analyzer and interactive viewer that
runs in a terminal in *nix systems or through your browser.
GoAccess home page: https://goaccess.iocloses: vim/vim#154140aa65b48fb
Co-authored-by: Adam Monsen <haircut@gmail.com>
Make `:Sexplore` / `:Hexplore` / `:Vexplore` commands honor the user
`&split{right,below}` settings (or netrw-specific `g:netrw_alt{o,v}`)
instead of hardcoding a split direction. Similarly, update banged
variants of the two latter commands to follow the inverted preference.
closes: vim/vim#15417c527d90fae
Co-authored-by: Ivan Shapovalov <intelfx@intelfx.name>
Problem:
Tests have lots of exec_lua calls which input blocks of code
provided as unformatted strings.
Solution:
Teach exec_lua how to handle functions.
When the cursor is moved we terminate any active OSC 8 sequences to
prevent the sequence from inadvertently spanning regions it is not meant
to span. However, if we do not also reset the TUI's active attr id
(print_attr_id) then the TUI does not "know" that it's current attribute
set has changed. When cursor_goto is called to wrap a line, the TUI does
not recompute the attributes so the OSC 8 sequence is not restarted
again.
When we terminate an OSC 8 sequence before moving the cursor, also reset
the active attr id so that the attributes are recomputed for URLs.
Problem: Wrong comment for "len" argument of call_simple_func().
Solution: Remove the "or -1 to use strlen()". Also change its type to
size_t to remove one cast. (zeertzjq)
closes: vim/vim#15410c1ed788c1b
Problem: Calling a function from an "expr" option has too much overhead.
Solution: Add call_simple_func() and use it for 'foldexpr'
87b4e5c5db
Cherry-pick a call_func() change from patch 8.2.1343.
Add expr-option-function docs to options.txt.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: using a script-local function requires using "s:" when
setting 'completefunc'.
Solution: Do not require "s:" in Vim9 script. (closesvim/vim#9796)
1fca5f3e86
vim-patch:8.2.4417: using NULL pointer
Problem: Using NULL pointer.
Solution: Set offset after checking for NULL pointer.
e89bfd212b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: too many strlen() calls in syntax.c
Solution: refactor code to reduce the number or strlen() calls,
get rid of un-used SYN_NAMELEN macro
(John Marriott)
closes: vim/vim#15368b4ea77185c
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: ex: trailing dot is optional for :g and :insert/:append
Solution: don't break out early, when the next command is empty.
(Mohamed Akram)
The terminating period is optional for the last command in a global
command list.
closes: vim/vim#154070214680a8e
Co-authored-by: Mohamed Akram <mohd.akram@outlook.com>
Problem: [security] use-after-free in tagstack_clear_entry
(Suyue Guo )
Solution: Instead of manually calling vim_free() on each of the tagstack
entries, let's use tagstack_clear_entry(), which will
also free the stack, but using the VIM_CLEAR macro,
which prevents a use-after-free by setting those pointers
to NULL
This addresses CVE-2024-41957
Github advisory:
https://github.com/vim/vim/security/advisories/GHSA-f9cr-gv85-hcr48a0bbe7b8a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in check_argument_type
Solution: Reset function type pointer when freeing the function type
list
function pointer fp->uf_func_type may point to the same memory, that was
allocated for fp->uf_type_list. However, when cleaning up a function
definition (e.g. because it was invalid), fp->uf_type_list will be
freed, but fp->uf_func_type may still point to the same (now) invalid
memory address.
So when freeing the fp->uf_type_list, check if fp->func_type points to
any of those types and if it does, reset the fp->uf_func_type pointer to
the t_func_any (default) type pointer
closes: vim/vim#136520f28791b21
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in exec_instructions()
Solution: get tv pointer again
[security]: use-after-free in exec_instructions()
exec_instructions may access freed memory, if the GA_GROWS_FAILS()
re-allocates memory. When this happens, the typval tv may still point to
now already freed memory. So let's get that pointer again and compare it
with tv. If those two pointers differ, tv is now invalid and we have to
refresh the tv pointer.
closes: vim/vim#136215dd41d4b63
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity warning in cstrncmp()
(after v9.1.0645)
Solution: Change the type of n2 to int.
(zeertzjq)
________________________________________________________________________________________________________
*** CID 1615684: Integer handling issues (INTEGER_OVERFLOW)
/src/regexp.c: 1757 in cstrncmp()
1751 n1 -= mb_ptr2len(s1);
1752 MB_PTR_ADV(p);
1753 n2++;
1754 }
1755 // count the number of bytes to advance the same number of chars for s2
1756 p = s2;
>>> CID 1615684: Integer handling issues (INTEGER_OVERFLOW)
>>> Expression "n2--", which is equal to 18446744073709551615, where "n2" is known to be equal to 0, underflows the type that receives it, an unsigned integer 64 bits wide.
1757 while (n2-- > 0 && *p != NUL)
1758 MB_PTR_ADV(p);
1759
1760 n2 = p - s2;
1761
1762 result = MB_STRNICMP2(s1, s2, *n, n2);
closes: vim/vim#15409e8feaa354e
`buf.code_action` always included diagnostics on a given line from all
clients. Servers should only receive diagnostics they published, and in
the exact same format they sent it.
Should fix https://github.com/neovim/neovim/issues/29500
inotifywait man page specifies:
The file must be specified with a relative or absolute path according to whether a relative or absolute path is given for watched directories.
So it would only work this way in case the path is relative (which at least for gopls it is not)
- Prefix all global variables with "g:".
- Add spaces around each variable assignment operator.
- Remove extraneous whitespace characters.
- Remove a spurious _serializable_ Java keyword (since v1.1,
java.io.Serializable and java.io.Externalizable interfaces
provide an API for object serialization; see vim-6-0j).
- Normalise the syntax definition argument order by making
_contained_ the first argument of each such definition.
- Normalise the argument tabulation for highlighting group
definitions.
Reference:
https://web.archive.org/web/20010821025330/java.sun.com/docs/books/jls/first_edition/html/1.1Update.html
related: vim/vim#153999aabcef1c8
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
- Reword a few sentences and reformat a few paragraphs.
- Supply absent capitalisation and punctuation.
- Make listed highlighting groups and code stand out.
- Prefix all Java-related global variables with "g:".
- Add spaces around each variable assignment operator.
- Acknowledge that some Javadoc variables are maintained in
the HTML syntax file.
Also, move the overridable _default_ HTML group links before
the HTML syntax file inclusion in order to implement the
documented diverged settings.
related: vim/vim#153993749dff093
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: Cannot use an autoload function from a package under start.
Solution: Also look in the "start" package directory. (Bjorn Linse,
closesvim/vim#7193)
223a950a85
Nvim already does this in do_in_cached_path(), and this change has no
effect in Nvim as Nvim removes DIP_START after do_in_cached_path().
Accidentally failed to mark as ported:
vim-patch:8.2.1731: Vim9: cannot use += to append to empty NULL list
Co-authored-by: bfredl <bjorn.linse@gmail.com>
Problem: eval5() and eval7 are too complex
Solution: Refactor eval5() and eval7() in eval.c
(Yegappan Lakshmanan)
closes: vim/vim#14900734286e4c6
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
- Make diff colors more accessible, Green for added, Red for deleted, Blue for Changed
- Change Search to blue to be visible with Diff colors
- Change Todo to bright magenta
closes: vim/vim#15400d88ebcbd9f
Co-authored-by: Maxim Kim <habamax@gmail.com>
- Add PmenuMatch and PmenuMatchSel to all colorschemes
- Add contrast to habamax Type, String, Constant and PreProc
- Change habamax PmenuSel to neutral gray to make PmenuMatchSel more visible
- Change habamax Tabline and VertSplit
- Make Conceal less visible for zellner, torte, shine, ron, peachpuff,
pablo, morning, koehler, evening, delek, blue, darkblue, lunaperche,
retrobox
- Add Added/Changed/Removed highlights
- Fix retrobox Terminal background
- Other minor fixes and improvements
closes: vim/vim#15267fcc53461d4
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem:
Some language servers (e.g., rust-analyzer, texlab) are desynced when
the user deletes the entire contents of the buffer. This is due to the
discrepancy between how nvim computes diff and how nvim treats empty
buffer.
* diff: If the buffer became empty, then the diff includes the last
line's eol.
* empty buffer: Even if the buffer is empty, nvim regards it as having
a single empty line with eol.
Solution:
Add special case for diff computation when the buffer becomes empty so
that it does not include the eol of the last line.
Problem: CompletionItem in lsp spec mentioned the deprecated attribute
Solution: when item has deprecated attribute set hl_group to DiagnosticDeprecated
in complete function
Problem:
`'scrollbind'` does not work properly if the window being scrolled
automatically contains any filler/virtual lines (except for diff filler
lines).
This is because when the scrollbind check is done, the logic only
considers changes to topline which are represented as line numbers.
Solution:
Write the logic for determine the scroll amount to take into account
filler/virtual lines.
Fixes#29751
Problem: Coverity warning after 9.1.0440
Solution: Fix Coverity warning, add a test and
reduce the calls to clear_tv()
(Yegappan Lakshmanan).
closes: vim/vim#14845dbac0da631
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: eval.c not sufficiently tested
Solution: Add a few more additional tests for eval.c,
(Yegappan Lakshmanan)
closes: vim/vim#147994776e64e72
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Some functions are not tested
Solution: Add a few more tests, fix a few minor problems
(Yegappan Lakshmanan)
closes: vim/vim#14789fe424d13ef
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Cannot use a method with a complex expression.
Solution: Evaluate the expression after "->" and use the result.
c665dabdf4
Cherry-pick a "verbose" check from patch 8.2.4123.
N/A patches for version.c:
vim-patch:8.2.4102: Vim9: import cannot be used after method
vim-patch:8.2.4110: Coverity warns for using NULL pointer
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot use += to append to empty NULL list.
Solution: Copy the list instead of extending it. (closesvim/vim#6998)
81ed496048
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: regex: wrong match when searching multi-byte char
case-insensitive (diffsetter)
Solution: Apply proper case-folding for characters and search-string
This patch does the following 4 things:
1) When the regexp engine compares two utf-8 codepoints case
insensitive it may match an adjacent character, because it assumes
it can step over as many bytes as the pattern contains.
This however is not necessarily true because of case-folding, a
multi-byte UTF-8 character can be considered equal to some
single-byte value.
Let's consider the pattern 'ſ' and the string 's'. When comparing and
ignoring case, the single character 's' matches, and since it matches
Vim will try to step over the match (by the amount of bytes of the
pattern), assuming that since it matches, the length of both strings is
the same.
However in that case, it should only step over the single byte value
's' by 1 byte and try to start matching after it again. So for the
backtracking engine we need to ensure:
* we try to match the correct length for the pattern and the text
* in case of a match, we step over it correctly
There is one tricky thing for the backtracing engine. We also need to
calculate correctly the number of bytes to compare the 2 different
utf-8 strings s1 and s2. So we will count the number of characters in
s1 that the byte len specified. Then we count the number of bytes to
step over the same number of characters in string s2 and then we can
correctly compare the 2 utf-8 strings.
2) A similar thing can happen for the NFA engine, when skipping to the
next character to test for a match. We are skipping over the regstart
pointer, however we do not consider the case that because of
case-folding we may need to adjust the number of bytes to skip over.
So this needs to be adjusted in find_match_text() as well.
3) A related issue turned out, when prog->match_text is actually empty.
In that case we should try to find the next match and skip this
condition.
4) When comparing characters using collections, we must also apply case
folding to each character in the collection and not just to the
current character from the search string. This doesn't apply to the
NFA engine, because internally it converts collections to branches
[abc] -> a\|b\|c
fixes: vim/vim#14294closes: vim/vim#1475622e8e12d9f
N/A patches:
vim-patch:9.0.1771: regex: combining chars in collections not handled
vim-patch:9.0.1777: patch 9.0.1771 causes problems
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Illegal memory access when pattern starts with illegal byte.
Solution: Do not match a character with an illegal byte.
f50940531d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Opening a zipfile from HTTP gives an empty buffer.
Solution: Ensure that the magic bytes check does not
skip protocol processing.
Also use readblob() and remove commented out lines.
closes: vim/vim#15396c4be066817
Co-authored-by: Damien <141588647+xrandomname@users.noreply.github.com>
Problem:
Variables are often assigned multiple places in common patterns.
Solution:
Replace these common patterns with different patterns that reduce the
number of assignments.
Use `MAX` and `MIN`:
```c
if (x < y) {
x = y;
}
// -->
x = MAX(x, y);
```
```c
if (x > y) {
x = y;
}
// -->
x = MIN(x, y);
```
Use ternary:
```c
int a;
if (cond) {
a = b;
} els {
a = c;
}
// -->
int a = cond ? b : c;
```
Problem: Cannot use items() on a string.
Solution: Make items() work on a string. (closesvim/vim#11016)
3e518a8ec7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: items() does not work on a list. (Sergey Vlasov)
Solution: Make items() work on a list. (closesvim/vim#11013)
976f859763
Skip CHECK_LIST_MATERIALIZE.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Check that mapping rhs starts with lhs doesn't work if lhs is
not simplified.
Solution: Keep track of the mapblock containing the alternative lhs and
also compare with it (zeertzjq).
fixes: vim/vim#15376closes: vim/vim#153849d997addc7
Cherry-pick removal of save_m_str from patch 8.2.4059.
Problem: E1510 may happen when formatting a message
(after 9.1.0181).
Solution: Only give E1510 when using typval. (zeertzjq)
closes: vim/vim#153910dff31576a
**Problem:** With anonymous nodes toggled in the inspect tree, only
named nodes will be highlighted when moving the cursor in the source
code buffer.
**Solution:** Retrieve the anonymous node at the cursor (when toggled on
in the inspect tree) and highlight them when appropriate, for better
clarity/specificity.
This is identical to `named_node_for_range` except that it includes
anonymous nodes. This maintains consistency in the API because we
already have `descendant_for_range` and `named_descendant_for_range`.
Problem: filetype: SuperHTML template files not recognized
Solution: Update the filetype detection code to detect '*.shtml' either
as HTML (Server Side Includes) or SuperHTML (template files)
(EliSauder)
related: vim/vim#15355
related: vim/vim#15367e57c9a19ed
Co-authored-by: EliSauder <24995216+EliSauder@users.noreply.github.com>
Reverts https://github.com/neovim/neovim/pull/29212 and adds a few
additional test cases
From the spec
> All text edits ranges refer to positions in the document they are
> computed on. They therefore move a document from state S1 to S2 without
> describing any intermediate state. Text edits ranges must never overlap,
> that means no part of the original document must be manipulated by more
> than one edit. However, it is possible that multiple edits have the same
> start position: multiple inserts, or any number of inserts followed by a
> single remove or replace edit. If multiple inserts have the same
> position, the order in the array defines the order in which the inserted
> strings appear in the resulting text.
The previous fix seems wrong. The important part:
> If multiple inserts have the same position, the order in the array
> defines the order in which the inserted strings appear in the
> resulting text.
Emphasis on _appear in the resulting text_
Which means that in:
local edits1 = {
make_edit(0, 3, 0, 3, { 'World' }),
make_edit(0, 3, 0, 3, { 'Hello' }),
}
`World` must appear before `Hello` in the final text. That means the old
logic was correct, and the fix was wrong.
Problem: Rename of pum hl_group is incomplete in source.
Solution: Also rename the test function. Rename to user_hlattr in code
to avoid confusion with pum_extra. Add test with matched text
highlighting (zeertzjq).
closes: vim/vim#153484100852e09
Reduce calls to hasFolding() and remove the has_fold argument.
For lines that don't have virtual lines this should be more efficient as
it should avoid any calls to hasFolding(), whereas before it was called
at least once for any buffer containing at least one virtual line.
This will be slightly less efficient for lines with multiple virtual
lines marks as hasFolding() is called once for each mark. This could be
optimized, but having multiple virtual lines marks on a single line is
very rare.
Problem: cannot mark deprecated attributes in completion menu
Solution: add hl_group to the Dictionary of supported completion fields
(glepnir)
closes: vim/vim#15314508e7856ec
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: filetype: Make syntax highlighting off for MS Makefiles
Solution: Try to detect MS Makefiles and adjust syntax rules to it.
(Ken Takata)
Highlighting of variable expansion in Microsoft Makefile can be broken.
E.g.:
2979cfc262/src/Make_mvc.mak (L1331)
Don't use backslash as escape characters if `make_microsoft` is set.
Also fix that `make_no_comments` was not considered if `make_microsoft`
was set.
Also add description for `make_microsoft` and `make_no_comments` to the
documentation and include a very simple filetype test
closes: vim/vim#15341eb4b903c9b
Co-authored-by: Ken Takata <kentkt@csc.jp>
Progress OpenEdge 11.6 added a new C-like single-line comment syntax; such
comments begin with `//` and proceed to the end of the line.
Add a new syntax group `ProgressLineComment` to implement highlighting for this
syntax. Rename the existing group from `ProgressComment` to
`ProgressBlockComment`, and introduce a cluster named `ProgressComment` to
encapsulate both.
closes: vim/vim#153394d68054c1e
Co-authored-by: Daniel Smith <daniel@rdnlsmith.com>
The Progress syntax file was last updated eight years ago, and the header
information twelve years ago. Attempts to contact the last known maintainer at
the email address listed in the file header (with the spam-prevention characters
removed) produced a delivery failure notification stating that the address did
not exist.
I intend to submit some minor improvements to this file. Per [1], I will assume
maintainership of it for the time being.
related: vim/vim#15339
[1]: https://groups.google.com/g/vim_dev/c/I3pOKIOgM4A/m/pekGQB_lBwAJd5cc8ee0fa
Co-authored-by: Daniel Smith <daniel@rdnlsmith.com>
Also:
- Remove mt_end() and MT_FLAG_DECOR_VIRT_TEXT_INLINE checks, as they are
already checked by marktree_itr_check_filter().
- Move ns_in_win() to the last check in decor_redraw_col().
Problem: Swapname has double slash when 'directory' ends in double slash.
(Shane Smith)
Solution: Remove the superfluous slash. (closesvim/vim#8876)
8b0e62c93b
The test got lost in #29758...
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Unnecessary STRLEN() in make_percent_swname()
Solution: Pass the end of "dir" to make_percent_swname()
(zeertzjq)
closes: vim/vim#15340242667ae14
Problem: Cursor moves beyond start of a folded range at the end of a buffer.
Solution: Move cursor to start of fold when going beyond end of buffer.
Check that cursor moved to detect FAIL in outer cursor function.
(Luuk van Baal)
dc373d456b
Fix the following two issues:
- pyenv root detection issue
When `PYENV_ROOT` environment variable is not set, neovim will detect
pyenv's root via `pyenv root` command, but which will be always fail
because `vim.fn.system()` returns result with additional `\n`. Using
`vim.system` instead prevents this problem. to trim it before check
whether it is exists
- python executable path detection issue
Filter unrelated `python-config` in cases where multiple python versions
are installed, e.g. `python-config`, `python3.10-config`,
`python3.11-config` etc.
Problem: filetype: OpenGL Shading Language files are not detected
Solution: detect various file extensions as GLSL filetype, include
indent and syntax script, do no longer recognize '*.comp'
as Mason filetype (Gregory Anders)
closes: vim/vim#15317e4b991ed36
libtermkey does not know how to parse CSI subparameters (parameters
separated by ':', ASCII 0x3A) and currently just ignores them. However,
many important CSI sequences sent by the terminal make use of
subparameters, most notably key events when using the kitty keyboard
protocol [1]. Enabling subparameters is a prerequisite for expanding
kitty keyboard protocol support in Neovim.
Concretely, we do this by returning pointers into the internal termkey
buffer for each CSI parameter rather than parsing them into integers
directly. When a caller wants to actually use the parameter as an
integer, they must call termkey_interpret_csi_param, which parses the
full parameter string into an integer parameter and zero or more
subparameters.
The pointers into the internal buffer will become invalidated when new
input arrives from the terminal so it is important that the individual
params are used and parsed right away. All of our code (and libtermkey's
code) does this, so this is fine for now, but is something to keep in
mind moving forward.
[1]: https://sw.kovidgoyal.net/kitty/keyboard-protocol/
Problem: Plugin authors and distribution packagers are confused about
the role of LuaJIT vs. PUC Lua.
Solution: Clarify that LuaJIT is preferred but not required (extensions
should not be assumed but checked for) and that vanilla Lua 5.1 should
be used without language extensions such as `goto`.
Previously the label was not added if the backport PR was created
manually. The new code is also easier to maintain as it's close to other
label-related code.
Problem:
- `syn region ...`s in syntax/mysql.vim match function names inaccurately.
- no syntax rules for mysql window function.
- coarse highlight definition in syntax/mysql.vim.
Solution:
- add `\<` before the function name for accuracy.
- add syntax rules for mysql window function.
- enhance the highlight definition.
closes: vim/vim#153116e37575760
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: Marks whose position did not change with the action that
invalidated them (right_gravity = false) are not revalidated
upon undo.
Solution: Remove early return when restoring a marks saved position so
that it is still revalidated. Add "move" guards instead.
Problem: pattern detection for Dracula language uses "*lvs" and "*lpe".
as there is no dot, those are not treated as extensions which
they should (judging by 'runtime/syntax/dracula.vim' and
common sense).
Solution: use "*.lvs" and "*.lpe" patterns (Evgeni Chasnovski)
closes: vim/vim#153035fb801a74f
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: filetype: prolog detection can be improved
Solution: Improved the Prolog file detection regex and added tests for
all cases. (igna_martinoli)
fixes: vim/vim#10835closes: vim/vim#1520650dc83cf92
Only include the tests, as code changes are superseded by later patches.
Co-authored-by: igna_martinoli <ignamartinoli@protonmail.com>
Problem: Wrong cursor position with 'breakindent' when a double-width
character doesn't fit in a screen line (mikoto2000)
Solution: Include the width of the 'breakindent' properly.
(zeertzjq)
fixes: vim/vim#15289closes: vim/vim#15290b5d6b5caac
Problem: Termdebug: still get E1023 when specifying arguments and using
a prompt buffer.
Solution: Use empty() instead of len(). Add a test. Fix wrong order of
arguments to assert_equal() in Test_termdebug_basic().
(zeertzjq)
closes: vim/vim#15288aef6179bcf
Problem: calling `vim.filetype.match()` has performance bottleneck in
that it has to match a lot of Lua patterns against several versions of
input file name. This might be the problem if users need to call it
synchronously a lot of times.
Solution: add "parent pattern pre-matching" which can be used to quickly
reject several potential pattern matches at (usually rare) cost of
adding time for one extra Lua pattern match.
"Parent pattern" is a manually added/tracked grouping of filetype
patterns which should have two properties:
- Match at least the same set of strings as its filetype patterns.
But not too much more.
- Be fast to match.
For them to be effective, group should consist from at least three
filetype patterns.
Example: for a filetpye pattern ".*/etc/a2ps/.*%.cfg", both "/etc/"
and "%.cfg" are good parent patterns (prefer the one which can group
more filetype patterns).
After this commit, `vim.filetype.match()` on most inputs runs ~3.4
times faster (while some inputs may see less impact if they match
many parent patterns).
Problem: filetype: Debian devscripts config files are not recognized
Solution: detect devscripts.conf and .devscripts files as sh filetype
(sourced by /bin/sh)
closes: vim/vim#1522776c19028ff
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Fix a few minor issues:
1. filename with whitespaces issue should be fixed now, fixes: vim/vim#12357
2. ":Termdebug args" should work now, fixes: vim/vim#15254closes: vim/vim#15261c3837a46ff
Omit the DeleteCommands() change as it isn't really an improvement.
Co-authored-by: Ubaldo Tiberi <ubaldo.tiberi@google.com>
Match types in Vim9 variable declarations.
Match Vim9 boolean and null literals. These are not matched in all
contexts yet.
related: vim/vim#15277d65e58f6f9
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Functions are global while they could be local.
Solution: Add "static". Add a few tests. (Yegappan Lakshmanan,
closesvim/vim#10612)
ee47eaceaa
Omit script_name_after_autoload(), untrans_function_name(): Vim9 script
only.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Test may leave file behind.
Solution: Delete the temporary file. Don't profile in the running Vim
instance.
8c801b374b
This only includes test_quickfix.vim changes.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Various inconsistencies in test files.
Solution: Add modelines where they were missing. Use Check commands instead
of silently skipping over tests. Adjust indents and comments.
(Ken Takata, closesvim/vim#6695)
6d91bcb4d2
This only includes test_quickfix.vim changes.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Code style is not check in test scripts.
Solution: Add basic code style check for test files.
94722c5107
Use Test_test_files() from latest Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Too many delete() calls in tests.
Solution: Use deferred delete where possible.
56564964e6
This includes all changes expect changes in test_startup.vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem:
When there are multiple inlay hints present at the same position, they
should be rendered in the order they are received in the response from
LSP as per the LSP spec. Currently, this is not respected.
Solution:
Gather all hints for a given position, and then set it in a single
extmark call instead of multiple set_extmark calls. This leads to fewer
extmark calls and correct inlay hints being rendered.
Since lintcommit is a required check, it will always need to be run.
However, the lintcommit script is not designed to work on PRs that
doesn't target master branch (and it's not clear whether it's even
desirable).
To circumvent this we create a "dummy" lintcommit check that is run on
release branches that always passes, thus fulfilling the condition of
the required check.
Problem: In :let-heredoc line continuation is recognized.
Solution: Do not consume line continuation. (Ozaki Kiichi, closesvim/vim#4580)
e96a2498f9
Nvim already sets may_garbage_collect to false in nv_event(), so the
timer change isn't needed.
Other changes have already been ported.
Also fix incorrect port of test in patch 8.1.1356.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
**Problem:** A query file for something like `html_tags` will not be
given html node completion
**Solution:** Check for parser aliases before offering completions
Co-authored-by: Lewis Russell <me@lewisr.dev>
Problem: filetype: Mediawiki files are not recognized
Solution: detect "*.mw" and "*.wiki" as mediawiki filetype,
include basic syntax and filetype plugins.
(AvidSeeker)
closes: vim/vim#15266b5844104ab
Co-authored-by: AvidSeeker <avidseeker7@protonmail.com>
Problem: Some command line arguments and regexp errors not tested.
Solution: Add a few test cases. (Dominique Pellé, closesvim/vim#8013)
a2b3e7dc92
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: matchstr() still does not match column offset when done after a
text search.
Solution: Only use the line number for a multi-line search. Fix the test.
(closesvim/vim#10938)
753aead960
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: matchstr() does match column offset. (Yasuhiro Matsumoto)
Solution: Accept line number zero. (closesvim/vim#10938)
75a115e8d6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when pattern looks below the last line.
Solution: Consider invalid lines to be empty. (closesvim/vim#10938)
13ed494bb5
Comment out the test as it uses Vim9 script and text properties.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Two placed signs in the same line are not combined. E.g. in the
terminal debugger a breakpoint and the PC cannot be both be
displayed.
Solution: Combine the sign column and line highlight attributes.
a2f6e42ded
Nvim already does this in decor_redraw_signs().
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Modifying a sign no longer updates already placed signs.
Solution: Loop over (newly-exposed) placed decorations when modifying a
sign definition. Update placed decor if it belongs to the sign
that is modified.
Github doesn't allow workflows to be run from the `github-actions`
account, which is the default account. This caused the CI on backport
PRs to not be run. The way to circumvent this is to use a token that
essentially "pretends" to be another user, which in turn triggers the CI
as desired.
Also run lintcommit on release branches as that is now a required check,
meaning it must always be run.
Problem: Spellfile code not completely tested.
Solution: Add a few more test cases. (Yegappan Lakshmanan, closesvim/vim#6929)
96fdf4348a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Spellfile code not completely tested.
Solution: Add a few more test cases. (Yegappan Lakshmanan, closesvim/vim#6918)
64e2db6dc6
Fix incorrect spellfile message.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when using NULL list with sign functions.
Solution: Handle a NULL list like an empty list. (issue vim/vim#8260)
5c56da4de8
Nvim's TV_LIST_ITER_MOD() already checks for NULL.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Signals test often fails on FreeBSD.
Solution: Use separate files for Suspend and Resume. (Ken Takata,
closesvim/vim#11065)
a9480dbc8c
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: TSTP and INT signal tests are not run with valgrind.
Solution: Sleep a bit longer. (closesvim/vim#10614)
61e3784819
Cherry-pick Test_signal_TSTP() from patch 8.2.3941.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: List of distributed files is outdated.
Solution: Update the file list. Minor comment updates.
a72514945b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tests fail when the float feature is disabled.
Solution: Skip tests that don't work without float support.
5feabe00c4
Cherry-pick Test_ruby_Vim_blob() from patch 8.1.0977 and skip it.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when assert_equal() runs into a NULL string.
Solution: Check for NULL. (Dominique) Add a test.
f155196444
Use the latest version of the test from Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: CI sometimes fails for MinGW.
Solution: Use backslashes in HandleSwapExists(). (Christian Brabandt,
closesvim/vim#9078)
4b2c804767
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: check for DO_NOT_FREE_CNT is very slow.
Solution: Move to a separate function so it can be skipped by setting
$TEST_SKIP_PAT.
dae453f339
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Auto-merging is a useful feature by github, but it requires required
checks which requires a few adjustments. The primary change is that
required checks can't use `paths` or `paths-ignore` as that risks not
running the job, and required checks must always be run.
A workaround for this is to introduce a dummy workflow which is used for
every path not used in the real workflow. That way the required job is
"always" run as far as github is concerned. The workaround is unweildly
so it's only useful to do it for costly workflows where the potential
benefits are big. If not it's better to simply remove any `paths` or
`paths-ignore` from a workflow instead.
Problem: tests: test_cpoptions leaves swapfiles around
Solution: Use :bw! instead of :close!
bb5d27dc79
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Manually deleting temp test files.
Solution: Use the 'D' flag of writefile() and mkdir().
45bbaef038
This only includes test_cpoptions.vim changes.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: ocaml runtime files are outdated
Solution: sync those files with the upstream repo,
detect a few more ocaml files
(Yinzuo Jiang)
closes: vim/vim#15260700cf8cfa1
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: Printed line no longer overwrites colon when pressing Enter in
Ex mode (after 9.1.0573).
Solution: Restore the behavior of pressing Enter in Ex mode.
(zeertzjq)
closes: vim/vim#152587d664bf0eb
Problem: An :lmap mapping for a printable keypad key is not applied
when typing it in Select mode.
Solution: Change keypad key to ASCII after setting vgetc_char.
(zeertzjq)
closes: vim/vim#1524590a800274d
Problem: Vim9: range without a command is not compiled.
Solution: Add the ISN_EXECRANGE byte code.
e4eed8c6db
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Ex command is still executed after giving E1247.
Solution: Indicate the error properly and set cmd to NULL.
(zeertzjq)
closes: vim/vim#15241d1b5ea984d
Problem: Unnecessary checks for v:sizeoflong in test_put.vim. They are
no longer necessary as patch 8.2.3661 has changed the count to
be within 32-bit integer limit.
Solution: Remove the checks (zeertzjq).
closes: vim/vim#1523969a28f6c08
Problem:
Empty dictionaries are converted into typed tables of the form `{ [true]
= 6}` instead of an empty dictionary representation `{}`. This leads to
incorrect table representation, along with failure in JSON encoding of
such tables as currently tables with only string and number type keys
can be encoded.
Solution:
The typed table logic has been removed from `nlua_push_Dictionary`. The
typed table logic is required only for float value conversions which is
already handled in `nlua_push_Float`. So, it is(was) no longer required
here.
Fixesneovim/neovim#29218
Before this change, "static inline" functions in headers needed to have
their function attributes specified in a completely different way. The
prototype had to be duplicated, and REAL_FATTR_ had to be used instead
of the public FUNC_ATTR_ names.
TODO: need a check that a "header.h.inline.generated.h" file is not
forgotten when the first "static inline" function with attributes
is added to a header (they would just be silently missing).
Problem: due to single list of sorted patterns, their matching inside
`vim.filetype.match()` was done very similarly but with extra checks
to stop processing negative priority patterns before extensions.
Solution: create separated sorted lists for patterns with non-negative
and negative priorities. This allows to process them in a single
extracted function making the main codeflow a bit nicer and more
easily expandable.
Taken from excerpts of the Python ftplugin and adapted,
indent script simply sources the python indent script.
closes: vim/vim#15171fc533c9f06
Co-authored-by: Riley Bruins <ribru17@hotmail.com>
Added overlay, tracefs and fixed the "none" keyword in the fstab syntax definition.
closes: vim/vim#152177a22cb8141
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: fnamemodify() treats ".." and "../" differently.
Solution: Expand ".." properly like how "/.." is treated in 8.2.3388.
(zeertzjq)
closes: vim/vim#152181ee7420460
Problem: Manually deleting temp test files.
Solution: Use the 'D' flag of writefile() and mkdir().
45bbaef038
This only includes test_cd.vim changes.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Using common name in tests leads to flaky tests.
Solution: Rename files and directories to be more specific.
3b0d70f4ff
This only includes test_cd.vim changes.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use relative paths as findfile() stop directories.
Solution: Change a relative path to an absolute path.
(zeertzjq)
related: vim/vim#15200closes: vim/vim#15202764526e279
Problem: Stop directory in findfile() doesn't work properly without a
trailing slash.
Solution: Always use fnamencmp(), not fnamecmp().
related: vim/vim#15200
related: vim/vim#15202e6ab23bd4a
Problem: Stop directory doesn't work properly in 'tags'.
(Jesse Pavel)
Solution: Also move the stop directory forward by one byte.
(zeertzjq)
This doesn't support relative stop directories yet, as they are not
supported in other places like findfile() either.
fixes: vim/vim#15200
related: vim/vim#1520268819afb2c
Problem: Using common name in tests leads to flaky tests.
Solution: Rename files and directories to be more specific.
3b0d70f4ff
This only includes test_findfile.vim changes.
vim-patch:9.1.0562: tests: inconsistency in test_findfile.vim
Problem: tests: inconsistency in test_findfile.vim, it saves and
restores 'shellslash', but doesn't actually set it
Solution: Set shellslash explicitly (zeertzjq)
closes: vim/vim#15217e7b98ab96e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: fnamemodify('path/..', ':p') differs from using 'path/../'.
Solution: Include the "/.." in the directory name. (closesvim/vim#8808)
4eaef9979f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: moving in the buffer list doesn't work as documented
(SenileFelineS)
Solution: Skip non-help buffers, when run from normal buffers, else
only move from help buffers to the next help buffer (LemonBoy)
As explained in the help section for :bnext and :bprev the commands
should jump from help buffers to help buffers (and from regular ones to
regular ones).
fixes: vim/vim#4478closes: vim/vim#15198893eeeb445
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: :bwipe doesn't remove file from jumplist and tagstack of other
tabpages. Time complexity of mark_forget_file() is O(n^2) when
removing all entries (after v9.1.0554)
Solution: Use FOR_ALL_TAB_WINDOWS(). Start the loops over the arrays
from the end instead of the start (zeertzjq)
closes: vim/vim#151992e7d89b398
vim-patch:9.1.0503: cannot use fuzzy keyword completion
Problem: cannot use fuzzy keyword completion
(Maxim Kim)
Solution: add the "fuzzycollect" value for the 'completeopt'
setting, to gather matches using fuzzy logic (glepnir)
fixes: vim/vim#14912closes: vim/vim#1497643eef882ff
vim-patch:9.1.0549: fuzzycollect regex based completion not working as expected
Problem: fuzzycollect regex based completion not working as expected
Solution: Revert Patch v9.1.0503 (glepnir)
closes: vim/vim#15192600a12d08e
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: filetype: htmlangular files are not properly detected
Solution: Use the new htmlangular filetype for angular files, because
since angular v17, those are no longer valid HTML files.
(Dennis van den Berg)
Since Angular 17, the new Control Flow Syntax is not valid HTML. This PR
adds a new filetype detection for the HTML templates of Angular.
It first checks the filename. The Angular convention is to use
*.component.html for the template. However, this is not mandatory.
If the filename does not match, it will check the contents of the file
if it contains:
- One of the Control-Flow blocks: @if, @for, @switch, @defer
- A structural directive: *ngIf, *ngFor, *ngSwitch, *ngTemplateOutlet
- Builtin Angular elements: ng-template or ng-content
- String interpolation: {{ something }}
This enables the Angular LSP to attach only to htmlangular filetypes, as
well as language parsers, such as tree-sitter.
closes: vim/vim#151901ad194c0df
Co-authored-by: Dennis van den Berg <dennis.vandenberg@nedap.com>
Problem: No test for antlr4 filetype
(after 9.1.0550)
Solution: Add a simple filename test
related: vim/vim#151918fc23bb8a4
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: antlr4 files are not recognized
Solution: Detect '*.g4' as antlr4 filetype, include a simple antlr4
syntax and filetype plugin (Yinzuo Jiang)
closes: vim/vim#151914a7a4a3675
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: :bw leaves jumplist and tagstack data around
(Paul "Joey" Clark)
Solution: Wipe jumplist and tagstack references to the wiped buffer
(LemonBoy)
As documented the :bwipeout command brutally deletes all the references
to the buffer, so let's make it delete all the entries in the jump list
and tag stack referring to the wiped-out buffer.
fixes: vim/vim#8201closes: vim/vim#151854ff3a9b1e3
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: No way to get the arity of a Vim function
(Austin Ziegler)
Solution: Enhance get() Vim script function to return the function
argument info using get(func, "arity") (LemonBoy)
fixes: vim/vim#15097closes: vim/vim#1510948b7d05a4f
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Neovim bundles treesitter parsers for bash and python but does
not use them by default. This dilutes the messaging about the bundled
parsers being required for functionality or reasonable out-of-the-box
experience. It also increases the risk of query incompatibilities for no
gain.
Solution: Stop bundling bash and python parser and queries.
Problem: `vim.filetype.match()` tries to match on contents even if there
is no contents (empty buffer or `{''}` explicit contents).
This results in extra avoidable execution duration for cases.
It matters, for example, when trying to match filetype based solely
on file name (which still needs `contents` or `buf` to properly match
earlier in the code path).
Solution: skip matching based solely on contents if it is `{''}`. This
works because:
- Matching solely on content is done after any user-configured
`vim.filetype.add()` hooks.
- All default matching on content might depend on supplied path
*only* if there is non-empty content (like in
`require('vim.filetype.detect').match_from_hashbang()`).
This one just sources from the SQL ftplugin. Without this, *.mysql
files don't inherit the common SQL settings.
closes: vim/vim#1516601e20902f4
Co-authored-by: Riley Bruins <ribru17@hotmail.com>
Kivy uses "#:" for preprocessing commands (like "#:import ...") which
were overridden by the comment syntax. This has been changed, and a
commentstring has been added.
closes: vim/vim#151638906e22df5
Co-authored-by: Riley Bruins <ribru17@hotmail.com>
Problem:
Exiting the insert mode with ctrl-c does not trigger InsertLeave
autocmd. This may lead to nil error in treesitter foldexpr.
Solution:
Check nil. Folds still can be stale after exiting the insert mode with
ctrl-c, but it will be eventually updated correctly.
An alternative solution would be to ensure that exiting the insert mode
always triggers do_foldupdate. This can be done either by "fixing"
ctrl-c or with on_key callback that checks ctrl-c (nvim-cmp does this).
Problem: Behavior of CursorMovedC is strange.
Solution: Also trigger when the cmdline has changed.
(zeertzjq)
fixes: vim/vim#15069closes: vim/vim#150718145620a95
Problem: Unused assignment in sign_define_cmd()
Solution: Remove the assignment. Also document the "priority" flag of
sign_define(). (zeertzjq)
closes: vim/vim#15169fc3f5dba52
Also add the newly documented keys from commit 6a4afb1efca1bac5fbc0281804591cf0a52b2d81
to index.txt which was forgotten.
related: vim/vim#15107fbbabbca33
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
zig cc implicitly defines NDEBUG with -O2. This breaks debug builds
which does not include -O2 or NDEBUG.
Solution:
Do not add -O2 when generating header files.
Problem: not possible to assign priority when defining a sign
(Mathias Fußenegger)
Solution: Add the priority argument for the :sign-define ex command and
the sign_define() function (LemonBoy)
Use the specified value instead of the default one (SIGN_DEF_PRIO) when
no priority is explicitly specified in sign_place or :sign place.
fixes: vim/vim#8334closes: vim/vim#15124b975ddfdf9
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: filetype: zone files are not recognized
(rpdprd)
Solution: Detect '*.zone' files as bindzone filetype
fixes: vim/vim#14222f095539b39
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: signed number detection for CTRL-X/A can be improved
(Chris Patuzzo)
Solution: Add the new "blank" value for the 'nrformat' setting. This
will make Vim assume a signed number only if there is a blank
in front of the sign.
(distobs)
fixes: vim/vim#15033closes: vim/vim#1511025ac6d67d9
Co-authored-by: distobs <cuppotatocake@gmail.com>
Problem: completion wrong with fuzzy when cycling back to original
(Quan Nguyen)
Solution: reset show_match_ok when cp_score is zero (glepnir)
fixes: vim/vim#15095closes: vim/vim#1510565407ce1d2
Co-authored-by: glepnir <glephunter@gmail.com>
Auto-completion and auto-formatting are common (though certainly not
universal) features that many users want. We can document how to
accomplish this in lsp-quickstart so that users that do want these
features can easily find examples of how to configure them.
Problem: the recursive parameter in the *_equal functions can be removed
Solution: Remove the recursive parameter in dict_equal(), list_equal()
object_equal and tv_equal(). Use a comparison of the static
var recursive_cnt == 0 to determine whether or not tv_equal()
has been called recursively (Yinzuo Jiang).
closes: vim/vim#150707ccd1a2e85
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: Cursor is moved to bottom of window trying to pagescroll when
already at the start of the buffer (Asheq Imran, after v9.1.0357)
Solution: Don't move cursor when buffer content did not move.
(Luuk van Baal)
8ccb89016e
Problem: Right release selects immediately when pum is truncated.
Solution: Use pum_height instead of pum_size when checking click row.
Don't place it above mouse row when there is more space below.
(zeertzjq)
fixes: vim/vim#15101closes: vim/vim#15102761a420c66
Problem: silent! causes following try/catch to not work
(Malcolm Rowe)
Solution: consider emsg_silent in handle_did_throw() and do not abort
evaluation flow for :silent! (LemonBoy)
The silent! flag causes the evaluation not to be aborted in case of
uncaught exceptions, adjust handle_did_throw to take this detail into
account.
Fixes the long-standing todo.txt item:
```
Problem that a previous silent ":throw" causes a following try/catch not
to work. (ZyX, 2013 Sep 28) With examples: (Malcolm Rowe, 2015 Dec 24)
Also see vim/vim#8487 for an example.
```
fixes: vim/vim#538closes: vim/vim#15128749ba0f6d9
Cherry-pick Test_deeply_nested_source() from patch 8.2.5169.
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: the code and docs for vim.diagnostic.JumpOpts.float send mixed
signals about what the default should be. When the option is first set,
in the global_diagnostic_options table, the comment clearly says that
the default is false. Later in the code, in goto_diagnostic, there's
a line that sets the default to true if no default is present. Finally,
the docs say that the default is true.
Solution: Change the docs to reflect the new default of false and fix
the goto_diagnostic function.
It seems that nvim-treesitter stops treesitter highlight when changing
filetype, so it makes sense for builtin ftplugins to do this as well.
Use :call and v:lua here to allow separation with '|'.
Problem:
Error when calling vim.treesitter.start() and vim.treesitter.stop() in
init.lua.
Solution:
Ensure syntaxset augroup exists after loading synload.vim.
Problem: on windows, the neovim executable (and thus the filetypes
associated to open with neovim) has no embedded icon
Solution: create a windows resource file pointing to the icon, and
add it to the nvim binary target
Set CMAKE_RUNTIME_OUTPUT_DIRECTORY for CMAKE_ARGS for the uncrustify
ExternalProject to point to DEPS_BIN_DIR because the uncrustify cmake
sources do not install to DESTDIR/bin under MSVC but to DESTDIR.
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
utf8proc already defines LATIN CAPITAL LETTER SHARP S (ẞ) to be the
uppercase variant of LATIN SMALL LETTER SHARP S (ß), so this special
workaround when using `gU` is no longer needed on the neovim side.
utf8proc contains all the data which is currently in
unicode_tables.generated.h internally, but in quite a different format.
Ideally unicode_tables.generated.h should be removed as well so we rely
solely on utf8proc. We want to avoid a situation where the possibility
of unicode mismatch occurs, e.g a distro using both unicode 12 and
unicode 13.
Although the built-in pum completion mechanism will filter anyway on the
next input it is odd if the initial popup shows entries which don't
match the current prefix.
Using fuzzy match on the label/prefix is compatible with
`completeopt+=fuzzy` and also doesn't seem to break postfix snippet
cases
Closes https://github.com/neovim/neovim/issues/29287
This is a breaking change which will make refactor of typval and shada
code a lot easier. In particular, code that would use or check for
v:msgpack_types.binary in the wild would be broken. This appears to be
rarely used in existing plugins.
Also some cases where v:msgpack_type.string would be used to represent a
binary string of "string" type, we use a BLOB instead, which is
vimscripts native type for binary blobs, and already was used for BIN
formats when necessary.
msgpackdump(msgpackparse(data)) no longer preserves the distinction
of BIN and STR strings. This is very common behavior for
language-specific msgpack bindings. Nvim uses msgpack as a tool to
serialize its data. Nvim is not a tool to bit-perfectly manipulate
arbitrary msgpack data out in the wild.
The changed tests should indicate how behavior changes in various edge
cases.
Problem: need more tests for nested dicts and list comparison
Solution: Add tests for comparing deeply nested List/Dict values
(Yegappan Lakshmanan)
closes: vim/vim#1508188bbdb04c2
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: with a single `context.options` there is no way for user to
force which scope (local, global, both) is being temporarily set and
later restored.
Solution: replace single `options` context with `bo`, `go`, `wo`, and
`o`. Naming and implementation follows how options can be set directly
with `vim.*` (like `vim.bo`, etc.).
Options are set for possible target `win` or `buf` context.
Problem: `vim._with()` has many different use cases which are not
covered with tests.
Solution: cover with tests. Some (many) test cases are intentionally
marked as "pending" because they cover cases which don't work as
expected at the moment (and fixing them requires specific knowledge of
C codebase). Use them as a reference for future fixes.
Also some of "can be nested" tests currently might pass only because
the tested context doesn't work.
Instead of looping over all captured nodes, just take the end range from
the last node in the list. This uses the fact that nodes returned by
iter_matches are ordered by their range (earlier to later).
Problem: Treesitter highlighter clears the already populated highlight
state when performing spell checking while drawing a
smoothscrolled topline.
Solution: Save and restore the highlight state in the highlighter's
_on_spell_nav callback.
With the variables defined, distinctly highlight parts of
a method declaration header: its name and parameter list
parens, from its type parameters, return type, and formal
parameters; and distinctly highlight parts of a lambda
expression: its parameter list parens and the arrow, from
its formal parameters and identifiers.
closes: vim/vim#1508301a4fb104d
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Match Vim9-script comments after :def and :enddef and legacy-script
comments after :func and :endfunc, in any definition context.
Highlight incorrect comment types after these commands as errors.
fixes: vim/vim#15062closes: vim/vim#15072fc64ac0be2
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: filetype: .envrc & .prettierignore not recognized
Solution: Detect '.envrc' as shell and '.prettierignore' as gitignore
filetype (Tyler Miller)
Support ft detection for `.envrc` files used by direnv, and
`.prettierignore` files used by prettier.
closes: vim/vim#15053resolves: neovim/neovim#2940549012cd8c2
Co-authored-by: Tyler Miller <tmillr@proton.me>
In the presence of parameterised types whose names begin
with a capital letter and end with a less-than sign "<" that
introduces a type argument or a list of comma-separated type
arguments, followed by a greater-than sign ">", a variable
"g:java_highlight_generics" can be defined to have some
components of such types uniformly coloured (by picking
highlight groups for javaGenericsC{1,2}, javaWildcardBound).
For example,
------------------------------------------------------------
java.io.InputStream stream = java.io.InputStream.nullInputStream();
java.util.function.Function<String,
java.util.function.BiFunction<String, String, String>> updater =
property -> (oldValue, newValue) -> oldValue;
java.util.logging.LogManager.getLogManager()
.updateConfiguration(stream, updater);
------------------------------------------------------------
Note that the diamond form and explicit type arguments do
not qualify for this kind of recognition.
For example,
------------------------------------------------------------
new java.util.HashSet<>().<String>toArray(new String[0]);
------------------------------------------------------------
References:
https://docs.oracle.com/javase/specs/jls/se21/html/jls-4.html#jls-4.5https://docs.oracle.com/javase/specs/jls/se21/html/jls-15.html#jls-15.9https://docs.oracle.com/javase/specs/jls/se21/html/jls-15.html#jls-15.12.2.1closes: vim/vim#15050beb02ed674
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: Mode message for spell completion doesn't match allowed keys
(Kyle Kovacs)
Solution: Show "^S" instead of "s".
(zeertzjq)
This matches the code in vim_is_ctrl_x_key():
case CTRL_X_SPELL:
return (c == Ctrl_S || c == Ctrl_P || c == Ctrl_N);
fixes: neovim/neovim#29431closes: vim/vim#150657002c055d5
Problem: hard to detect cursor movement in the command line
Solution: Add the CursorMovedC autocommand
(Shougo Matsushita)
closes: vim/vim#15040d09521476f
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem:
`o`-ing on a folded line opens the fold, because the new line gets the
fold level from the above line (level '='), which extends the fold to
the new line. `O` has a similar problem when run on the line below a
fold.
Solution:
Use -1 for the added line to get the lower level from the above/below
line.
Suggest adding them to news.txt instead.
Also don't ignore changes to intro.txt and sponsor.txt, as they don't
change much these days, and it's necessary to consider whether to
include their changes in Nvim's intro.txt.
Instances of anonymous classes can be passed as method
arguments and should be subject to line folding as well.
closes: vim/vim#1504894c5d8a5e2
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: too complicated mapping restore in termdebug
Solution: simplify unmapping logic, add a few more tests
(Ubaldo Tiberi)
closes: vim/vim#1504646f2823807
Co-authored-by: Ubaldo Tiberi <ubaldo.tiberi@google.com>
Problem: inner-tag textobject confused about ">" in attributes
Solution: Skip over quoted '>' when determining the start position
fixes: vim/vim#15043closes: vim/vim#15049ca7f93e6f3
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
If there are errors in the last line of a buffer, something like `Gdk` or
`G2k3J` will produce an error (at least with `lua_ls`):
Error executing vim.schedule lua callback:
.../neovim/share/nvim/runtime/lua/vim/diagnostic.lua:1446: Invalid 'line': out of range
Solution:
Only set extmarks if the target buffer line still exists
Problem: termdebug can be further improved
Solution: refactor save/restore, update docs,
add a new save/restore test (Ubaldo Tiberi)
closes: vim/vim#15032a48637c105
Co-authored-by: Ubaldo Tiberi <ubaldo.tiberi@google.com>
Problem: CurSearch highlight is often wrong.
Solution: Remember the last highlighted position and redraw when needed.
368137aa52
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Current instance of last search pattern not easily spotted.
Solution: Add CurSearch highlighting. (closesvim/vim#10133)
a43993897a
Some code is superseded by later patches that are already ported.
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: MS-Windows: doesn't handle symlinks properly
(Timothy Madden)
Solution: Implement lstat() on MS-Windows
(author)
lstat() differs from stat() in how it handles symbolic links, the former
doesn't resolve the symlink while the latter does so.
Implement a simple yet effective fallback using Win32 APIs.
fixesvim/vim#14933closes: vim/vim#1501423c5ebeb95
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: Hit assert when clicking inside a padded 'statuscolumn' that
is padded beyond the length of the allocated click_defs.
Solution: Still consider this a "in_statuscol" click, but return early
when about to execute the click func.
Followup to #28515:
Rename the static os_homedir() to os_uv_homedir() to emphasize that it
is a wrapper around a libuv function.
Add the function os_get_homedir() to os/env.c to return the cached
homedir value as a const. Must be called after homedir is initialized or
it fails.
The difference between this function and the static os_uv_homedir() is
that the latter gets the homedir from libuv and is used to initialize
homedir in init_homedir(), while os_get_homedir() just returns homedir
as a const if it's initialized and is public.
Use the os_get_homedir() accessor for ~/ expansion on Windows to make
the code more concise.
Add a Windows section to main_spec.lua with tests for expanding ~/ and
~\ prefixes for files passed in on the command-line.
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Do the expansion right after setting the expand context, so that the
length of the completion prefix can be set, but don't do that directly
in set_one_cmd_context(), as that's also called by getcmdcompltype().
Problem: matched text is highlighted case-sensitively
Solution: use MB_STRNICMP, update highlighting when the base changes
(glepnir)
fixes: vim/vim#15021closes: vim/vim#15023f189138b39
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Matched text isn't highlighted in cmdline pum.
Solution: Use cmdline completion pattern in cmdline mode.
(zeertzjq)
closes: vim/vim#15029d8c9340fc6
Cherry-pick syntax.txt change from runtime update.
Problem: Wrong matched text highlighted in pum with 'rightleft'.
Solution: Match using the original text instead of the reversed text.
(zeertzjq)
closes: vim/vim#1502063901e8963
The value of g:javac_makeprg_params, if set, is added to the value of
'makeprg' as an option string.
closes: vim/vim#149990ddab582fa
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: A custom 'statuscolumn' needs to check a bunch of options and
placed signs to replicate the default number column.
Solution: Rework %l item to include the necessary logic to mimic the
default number column. Remove now redundant %r item.
Also:
- Restore the capability to mark as an error braces nested
in parens with g:javaInParen.
- Try not to fold top-level-type bodies. (Defining multiple
package-private top level types in a single source file is
not recommended as it can impose order among compilation
units; so it is assumed that only one such top level type
is usually defined.)
- Compose ‘method header’ highlighting and block braces
folding.
- Do not highlight block braces whenever ‘method header’
highlighting is requested.
This bundling of ‘method headers’ and block braces for
highlighting can be traced back to Vim v5.0; however, no
comment or documentation entry conveys any justification.
For example, it is hard to discover the connection between
block braces for "while", "if", etc., statements and method
body block braces. The former behaviour can be attained in,
e.g. ~/.vim/after/syntax/java.vim:
------------------------------------------------------------
if exists("g:java_highlight_functions")
syn clear javaBlock javaInParen
syn match javaBlockOther "[{}]"
syn region javaBlock transparent matchgroup=javaBlockStart
\ start="\%(^\|^\S[^:]\+\)\@120<!{" end="}" fold
hi def link javaBlockStart javaFuncDef
hi def link javaBlockOther javaBlockStart
if exists("g:java_mark_braces_in_parens_as_errors")
syn match javaInParen contained "[{}]"
endif
endif
------------------------------------------------------------
Note: Read ‘a method header omitting a _throws_ clause’ for
every ‘method header’ appellation used above.
371bab0594
Co-authored-by: Aliaksei Budavei <32549825+zzzyxwvut@users.noreply.github.com>
Problem: Vim-script files may not be recognised
Solution: Add shebang line detection (Doug Kearns)
closes: vim/vim#150120d4d23dac0
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Test for patch 9.1.0489 doesn't fail without the fix.
Solution: Use "!" flag of feedkeys() so that ex_normal_busy is not set
and ins_compl_check_keys() is not skipped (zeertzjq).
closes: vim/vim#15018acc8746941
Problem: default completion may break with fuzzy
Solution: check that completion_match_array is not null
(glepnir)
closes: vim/vim#15010aced8c2f4f
Co-authored-by: glepnir <glephunter@gmail.com>
This was wrongly included as of patch 1c6734291295bf8aa39577840b40bb
because apparently I messed up the use of git apply :/
52f2ff0363
Co-authored-by: Christian Brabandt <cb@256bit.org>
This change does the following 3 things:
1) non need to quote the file to be extracted
The zipfile plugin used to quote and fnameescape() the path to the
file to be extracted. However testing with unzip showed, that while this
works on Linux on Windows you shall not escape the blanks in filenames.
As long as the pathname is properly quoted, this words on Linux and
Windows.
2) reset shellslash (MS-Windows only)
When shellslash is set, filenames to the zip archive will be forward
quoted. However since the filename is eventually handed over to the
unzip command, we need to make sure to use native paths so that the
command will understand what file to open. Therefore, if shellslash is
set (and the shell is cmd.exe), replace any forward slashes by the
expected backslashes
3) style:
Use tabs for the Header, remove a few comments in the s:Escape() and
zip#read() functions
fixes: vim/vim#149981c67342912
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Cmdline pum doesn't work properly with 'rightleft'.
Solution: Don't use curwin->w_p_rl in cmdline mode in pum_redraw(). Use
a static variable since pum_may_redraw() may be called in any
mode. Also correct position of other popups with 'rightleft'.
(zeertzjq)
closes: vim/vim#15005883018feff
Problem: Wrong padding for pum "kind" with 'rightleft'.
Solution: Fix off-by-one error (zeertzjq).
The screen_fill() above is end-exclusive, and
- With 'rightleft' it fills `pum_col - pum_base_width - n + 1` to `col`,
so the next `col` should be `pum_col - pum_base_width - n`.
- With 'norightleft' it fills `col` to `pum_col - pum_base_width + n - 1`,
so the next `col` should be `pum_col - pum_base_width + n`.
closes: vim/vim#15004a2324373eb
Match shebang lines in Vim9 and legacy script.
Mark these as an error if they appear anywhere other than the first line
of a legacy-script file. In Vim9 script these match as normal line
comments rather than an error.
ae321b51f7
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem:
When 'ignorecase' is set, the default keymap Q and Q would exit visual
mode.
This issue was raised in #28287 and a fix was applied in #28289.
However, `==` operator is subject to user `ignorecase` setting.
Solution:
Switching to `==#` operator would guarantee case sensitive comparison
between visual mode and linewise visual mode.
Co-authored-by: Kuanju Chen <kuanju.chen@mksinst.com>
Problem: completed item not update on fuzzy completion
Solution: reset compl_shown_match when at original match position
(glepnir)
closes: vim/vim#14955f94c9c482a
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Matched text shouldn't be highlighted in "kind" and "menu".
Solution: Pass hlf_T instead of the attribute. Fix indent.
(zeertzjq)
closes: vim/vim#14996afbe5359e9
Problem: fuzzy string matching executed when not needed
Solution: when no leader is available, can skip fuzzy logic, so return
early (glepnir)
closes: vim/vim#149861c29602662
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: fuzzy_match_str_with_pos() does unnecessary list operations.
Solution: Use fuzzy_match() directly (zeertzjq).
closes: vim/vim#149872f95ca9fce
N/A patch:
vim-patch:9.1.0478: potential deref of NULL pointer in fuzzy_match_str_with_pos
Problem: Cannot see matched text in popup menu
Solution: Introduce 2 new highlighting groups: PmenuMatch and
PmenuMatchSel (glepnir)
closes: vim/vim#1469440c1c3317d
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Sorting of completeopt+=fuzzy is not stable.
Solution: Compare original indexes when scores are the same.
(zeertzjq)
closes: vim/vim#149888e56747fd2
Problem:
For snippets lsp.completion prefers the label if it is shorter than the
insertText or textEdit to support postfix completion cases but clangd
adds decoration characters to labels. E.g.: `•INT16_C(c)`
Solution:
Use parse_snippet on insertText/textEdit before checking if it is
shorter than the label.
Fixes https://github.com/neovim/neovim/issues/29301
Problem: both `StatusLineTerm`/`StatusLineTermNC` are now explicitly
used, but `:color vim` does not set them to the values used in Vim.
This might be fine if `:color vim` is treated as "the state of default
color scheme prior the big update", but it seems to be better treated
as "Vim's default color scheme" (how it is documented in its header).
Solution: add `StatusLineTerm`/`StatusLineTermNC` definitions to
'runtime/colors/vim.lua'.
Use explicit foreground colors ('Whte'/'Black') instead of `guifg=bg`
used in source, as the latter caused some problems in the past (if
`Normal` is not defined, `nvim_set_hl()` can't recognize `'bg'` as the
foreground value).
Also realign the rest of the background conditional highlight groups.
This reduces the number of nil checks around buf_versions usage
Test changes were lifted from 5c33815
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
this only changes the error message, so that it is clear that
the error is with the LSP server, rather than being a crash inside
nvim runtime scripts. We are already doing a lot of validation,
it's just that nil was being overlooked here.
This fixes issue #27395
Problem: termdebug plugin needs more love
Solution: start with some more Vim9 refactoring
to improve maintenance and readability
(Ubaldo Tiberi)
List of Changes and the Reasoning Behind Them:
1) Introduction of InitScriptVariables() Function:
Reasoning: This function has been introduced to ensure that when you open and
close Termdebug, and then open it again, there are no leftover script variable
values from the previous session. Leftover values could potentially cause
issues. The goal is for each Termdebug session to be independent of previous
sessions. At startup, all script variables are initialized. The only exception
is g:termdebug_loaded located at the very beginning of the script to prevent
sourcing the script twice. The variables are declared at script level and
defined in InitScriptVariables().
2) More Descriptive Variable Names:
Reasoning: The names of variables have been made more comprehensive. Almost
every Termdebug buffer now has a variable to indicate its name and another
variable to indicate its number, improving code readability and
maintainability. Due to the latest discussion around the &mousemodel option
save/restore mechanism, perhaps some other variables shall be prepended with
saved_.
3) Consistent Naming for GDB Terminal Buffers:
Reasoning: The name of the GDB terminal buffer now matches the name of the GDB
program being used, e.g., 'gdb', 'mygdb', 'arm-eabi-none-gdb', etc. This
ensures clarity and consistency in identifying buffers.
4) Other minor improvements:
Moved EchoErr() on top, added another test, some refactoring, mainly changed
several 0 and 1 to true and false
closes: vim/vim#14980ef8eab86e2
Co-authored-by: Ubaldo Tiberi <ubaldo.tiberi@volvo.com>
Problem: glob() not sufficiently tested
Solution: Add more tests for directory containing [] chars
related: vim/vim#149918b34aea1b0
Co-authored-by: Christian Brabandt <cb@256bit.org>
The ui_rgb_attached function determines if any UI is attached which
supports RGB (truecolor). We determine if the TUI supports RGB via the
'termguicolors' option which is checked at the beginning of this
function. If the TUI does not support RGB ('termguicolors' is unset), we
check to see if any _other_ UI is attached which supports RGB.
Normally, the TUI's "rgb" flag and the 'termguicolors' option are the
same. However, they may differ during startup when the "rgb" flag is set
by tui/tui.c to indicate to the core that the terminal emulator supports
truecolor. The 'termguicolors' option is not actually set until
_defaults.lua runs.
These highlight groups are used for the statusline in :terminal windows.
By default they link to StatusLine and StatusLineNC (respectively), so
there is no visual difference unless a colorscheme defines these groups
separately.
Problem: the previous documentation falsely states that "v" always
refers to the start of a visual area. In fact, the reference of "v" and
"." complement each other. If the cursor is at the start of
a (characterwise) visual area, then "v" refers to the end of the area.
Solution: be more verbose and explicit about the connection between "."
and "v" and also refer to |v_o| which many vim users will be familiar
with for visual areas.
210b39c2d6
Co-authored-by: Peter Aronoff <peter@aronoff.org>
Problem: block_editing errors out when using <enter>
(Ali Rizvi-Santiago, after v9.1.0274)
Solution: Change ins_len from size_t to int so that the test
if ins_len is negative actually works properly
Add a test, so that this doesn't regress.
fixes: vim/vim#149601fb9eae579
Co-authored-by: Christian Brabandt <cb@256bit.org>
Allow highlighting of strings within comments to be disabled by setting
g:vimsyn_comment_strings to false.
959c3c887b
Co-authored-by: dkearns <dougkearns@gmail.com>
When libvterm receives the OSC 52 escape sequence it ignores it because
Nvim does not set any selection callbacks. Install selection callbacks
that forward to the clipboard provider, so that setting the clipboard
with OSC 52 in the embedded terminal writes to the system clipboard
using the configured clipboard provider.
The latter was mostly relevant with the past char_u madness.
NOTE: STRCAT also functioned as a counterfeit "NOLINT" for clint
apparently. But NOLINT-ing every usecase is just the same as disabling
the check entirely.
Problem:
It's a common practice to set 'signcolumn=yes' (always show) instead of default 'signcolumn=auto' in order to prevent annoying horizontal shifting in editable buffers when using some popular plugins that add/remove signs on the fly. This makes signcolumn always visible and breaks the text flow of pre-formatted man pages, even when no signs are actually defined. Some other options are already tweaked in man.vim to address the issue (e.g. 'nonumber'), but not signcolumn.
Solution:
set 'signcolumn=auto' in ftplugin/man.vim.
By default there is no |signs| in man pages anyway (and I am not aware of any plugins that could define them in man pages), so 'signcolumn=auto' should behave like 'signcolumn=no', i.e. hide the empty column in order to keep buffer width same as terminal width.
In a (rare?) case when user does define some signs in man pages, signcolumn will appear (breaking the text flow).
Problem:
1. multiple `setlocal` commands are spread across the script.
2. several options, apparently, serve the same purpose (hide UI columns) which may not be immediately clear. more options may be required to fullfill the same purpose or they could be removed all together as a group if better solution is found later
3. `setlocal nofoldenable` may be overriden by conditional block later in the script.
Solution:
1. move 'colorcolumn' and 'nolist' to the group of other options at the beginning
2. add an explanatory comment about options that disable UI columns
3. move 'nofoldenable' to the if-else block to keep relevant commands coupled
Problem: Legacy :sign API still allows placing signs beyond the end of
the buffer. This is unaccounted for by the signcolumn tracking
logic and is disallowed in general for the extmark API which
implements it now.
Solution: Clamp legacy sign line number to the length of the buffer.
This change fixes an issue where glob patterns like `{a,ab}` would not
match `ab` because the first option `a` matches, then the end of the
string is expected but `b` is found, and LPeg does not backtrack to try
the next option `ab` which would match. The fix here is to also append
the rest of the pattern to the generated LPeg pattern for each option.
This changes a glob `{a,ab}` from being parsed as
("a" or "ab") "end of string"
to
("a" "end of string" or "ab" "end of string")
Here, matching against `ab` would try the first option, fail to match,
then proceed to the next option, and match.
The sacrifice this change makes is dropping support for nested `{}`
conditions, which VSCode doesn't seem to support or test AFAICT.
Fixes#28931
Co-authored-by: Sergey Slipchenko <faergeek@gmail.com>
`nvim_get_option_value` throws a warning if both `scope` and `buf`
options are used at the same time. This is because using `buf` always
implies `scope` is local, and is therefore not needed. There's however
no need to error if `scope` is already set "local" as it's the correct
value.
Problem: Inconsistencies between functions for option flags.
Solution: Consistently use "unsigned int" as return type and rename
get_bkc_value() to get_bkc_flags() (zeertzjq).
closes: vim/vim#14925aa925eeb97
It's a function to perform operations in their own sealed context,
similar to pythons `with`. This helps ease operations where you need to
perform an operation in a specific context, and then restore the
context.
Marked as private for now as it's not ready for public use. The current
plan is to start using this internally so we can discover and fix any
problems. Once this is ready to be exposed it will be renamed to
`vim.with`.
Usage:
```lua
local ret = vim._with({context = val}, function()
return "hello"
end)
```
, where `context` is any combination of:
- `buf`
- `emsg_silent`
- `hide`
- `horizontal`
- `keepalt`
- `keepjumps`
- `keepmarks`
- `keeppatterns`
- `lockmarks`
- `noautocmd`
- `options`
- `sandbox`
- `silent`
- `unsilent`
- `win`
(except for `win` and `buf` which can't be used at the same time). This
list will most likely be expanded in the future.
Work on https://github.com/neovim/neovim/issues/19832.
Co-authored-by: Lewis Russell <lewis6991@gmail.com>
If you like it you shouldn't put a ring on it.
This is what _every_ consumer of RStream used anyway, either by calling
rbuffer_reset, or rbuffer_consumed_compact (same as rbuffer_reset
without needing a scratch buffer), or by consuming everything in
each stream_read_cb call directly.
Problem:
Text edits with the same position (both line and character) were being
reverse sorted prior to being applied which differs from the lsp spec
Solution:
Change the sort order for just the same position edits
* Revert "fix(lsp): account for changedtick version gap on modified reset (#29170)"
This reverts commit 2e6d295f79.
* Revert "refactor(lsp): replace util.buf_versions with changedtick (#28943)"
This reverts commit 5c33815448.
This reverts 2875d45e79.
Allowing lintcommit to ignore "fixup" makes it too easy to fixup commits
to be merged on master as the CI won't give any indications that
something is wrong. Contributors can always squash their pull requests
if it annoys them too much.
Allow whitespace between the :substitute command and its pattern
argument. Although unusual, it is supported and there are examples in
the wild.
Match Vi compatible :substitute commands like :s\/{string}/. See :help
E1270.
fixes: vim/vim#14920closes: vim/vim#1492392f4e91590
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Cannot have buffer-local value for 'completeopt'
(Nick Jensen).
Solution: Make 'completeopt' global-local (zeertzjq).
Also for some reason test Test_ColonEight_MultiByte seems to be failing
sporadically now. Let's mark it as flaky.
fixes: vim/vim#5487closes: vim/vim#14922529b9ad62a
We currently check $COLORTERM in the TUI process to determine if the
terminal supports 24 bit color (truecolor). If $COLORTERM is "truecolor"
or "24bit" then we automatically assume that the terminal supports
truecolor, but if $COLORTERM is set to any other value we still query
the terminal.
The `rgb` flag of the UI struct is a boolean which only indicates
whether the UI supports truecolor, but does not have a 3rd state that we
can use to represent "we don't know if the UI supports truecolor". We
currently use `rgb=false` to represent this "we don't know" state, and
we use XTGETTCAP and DECRQSS queries to determine at runtime if the
terminal supports truecolor. However, if $COLORTERM is set to a value
besides "truecolor" or "24bit" (e.g. "256" or "16) that is a clear
indication that the terminal _does not_ support truecolor, so it is
incorrect to treat `rgb=false` as "we don't know" in that case.
Instead, in the TUI process we only check for the terminfo capabilities.
This must be done in the TUI process because we do not have access to
this information in the core Neovim process when `_defaults.lua` runs.
If the TUI cannot determine truecolor support from terminfo alone, we
set `rgb=false` to indicate "we don't know if the terminal supports
truecolor yet, keep checking". When we get to `_defaults.lua`, we can
then check $COLORTERM and only query the terminal if it is unset.
This means that users can explicitly opt out of truecolor determination
by setting `COLORTERM=256` (or similar) in their environment.
Problem: no fuzzy-matching support for insert-completion
Solution: enable insert-mode completion with fuzzy-matching
using :set completopt+=fuzzy (glepnir).
closes: vim/vim#14878a218cc6cda
Co-authored-by: glepnir <glephunter@gmail.com>
LspDetach is now triggered by the main on_detach callback that is added
when an LSP client is attached to a buffer. The semantic_tokens module
already includes a LspDetach handler that does the right thing. When the
LspDetach trigger was added to the main LSP on_detach, it created a race
condition in semantic tokens when a buffer was deleted that would
trigger both its own on_detach and the LspDetach handlers. If the former
came last, an error was thrown trying to delete a non-existent augroup
(destroy() was being called twice).
Problem: Unsetting global variables earlier in #28578 to avoid
recursiveness, caused superfluous or even unlimited
showmode().
Solution: Partly revert #28578 so that the globals are unset at the end
of showmode(), and avoid recursiveness for ext UI by adding a
recursive function guard to each generated UI call that may
call a Lua callback.
Problem: no whitespace padding in commentstring option in ftplugins
Solution: Change default to include whitespace padding, update
existing filetype plugins with the new default value
(Riley Bruins)
closes: vim/vim#148430a0830624a
Co-authored-by: Riley Bruins <ribru17@hotmail.com>
Problem: Completion side effects not working randomly.
Solution: When creating the table of LSP responses, the table index
was used, but this is not the same as the actual client_id, so it was changed
to use the client_id directly.
Problem: The default commentstring for C/C++ can lead to invalid code
when commenting and does not match the Nvim codebase.
Solution: Change commentstring to `// %s` as used by Neovim. Also
set all commentstrings that derive from the default C string explicitly
(and correctly).
Problem: too many strlen() calls in drawline.c
Solution: Refactor code to avoid strlen()
(John Marriott)
closes: vim/vim#14890f51ff96532
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: Coverity complains about division by zero
Solution: Check explicitly for sw_val being zero
Shouldn't happen, since tabstop value should always be larger than zero.
So just add this as a safety measure.
7737ce519b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Text properties wrong when tabs and spaces are exchanged.
Solution: Take text properties into account. (Nobuhiro Takasaki,
closesvim/vim#5427)
5cb0b93d52
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Left shift is incorrect with vartabstop and shiftwidth=0
Solution: make tabstop_at() function aware of shift direction
(Gary Johnson)
The problem was that with 'vartabstop' set and 'shiftwidth' equal 0,
left shifts using << were shifting the line to the wrong column. The
tabstop to the right of the first character in the line was being used
as the shift amount instead of the tabstop to the left of that first
character.
The reason was that the tabstop_at() function always returned the value
of the tabstop to the right of the given column and was not accounting
for the direction of the shift.
The solution was to make tabstop_at() aware of the direction of the
shift and to choose the tabtop accordingly.
A test was added to check this behavior and make sure it doesn't
regress.
While at it, also fix a few indentation/alignment issues.
fixes: vim/vim#14864closes: vim/vim#1488788d4f255b7
Co-authored-by: Gary Johnson <garyjohn@spocom.com>
Problem: Test for what 8.2.4436 fixes does not check for regression.
Solution: Set several options. (Ken Takata, closesvim/vim#9830)
2dada73a4e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash with weird 'vartabstop' value.
Solution: Check for running into the end of the line.
4e889f98e9
Code change is N/A as it's superseded by virtual text changes.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Numberwidth may depend on number of signs with text in the
buffer and is not handled correctly for extmark signs.
Solution: Move legacy sign code for changed numberwidth so that it is
handled properly for legacy and extmark signs alike.
Since paste data is handled via a separate channel, the data processed via `input_buffer` is typically just explicit keys as typed in by the user. Therefore it should be fine to use `memmove()` to always put the remaining data in front when refilling the buffer.
This is a structural refactor with no logical changes, yet. Done in
preparation for simplifying rstream/rbuffer which will require more
state inline in RStream.
The initial idea was to have RStream and WStream as sub-types
symetrically but that doesn't work, as sockets are both reading and
writing. Also there is very little write-specific state to start with,
so the benefit of a separate WStream struct is a lot smaller. Just
document what fields in `Stream` are write specific.
Problem: minor issues in test_filetype with rasi test
(after 9.1.0453)
Solution: re-sort test_filetype, fix wrong syntax.txt help tags
f3dd6f617c
Co-authored-by: Christian Brabandt <cb@256bit.org>
#22856 made it possible for the msi installer to perform per-user
installations, which caused problems for users that already had
per-machine installations trying to update (the Windows Installer does
not support major upgrades across installation context, see #22933 and
https://stackoverflow.com/a/15498911). It was then reverted in #22949,
but the scope of the modification to the PATH environment variable was
not reverted.
Problem: No test for escaping '<' with shellescape()
Solution: Add a test. Use memcpy() in code to make it easier to
understand. Fix a typo (zeertzjq).
closes: vim/vim#1487688c8c547d5
Problem: MS-Windows: Compiler warnings
Solution: Resolve size_t to int warnings
closes: vim/vim#14874
A couple of warnings in ex_docmd.c have been resolved by modifying their
function argument types, followed by some changes in various function
call sites. This also allowed removal of some casts to cope with
size_t/int conversion.
51024bbc1a
Co-authored-by: Mike Williams <mrmrdubya@gmail.com>
Using a ring buffer for buffered synchronous fileio is just unnecessary
complexity.
- when reading, we always consume the _entire_ buffer before getting
into syscalls. Thus we reset the buffer to its initial position before
when we actually read.
- when writing and buffer is full, we always flush the entire buffer
before starting to buffer again. So we can reset the buffer to its
initial state.
Also no static buffers are needed for writing and skipping. Needing an
extra copy for each write completely defeated the purpose of
a ring buffer (if there had been one)
`lsp.util.buf_versions` was already derived from changedtick (`on_lines`
from `buf_attach` synced the version)
As far as I can tell there is no need to keep track of the state in a
separate table.
The `complete()` mechanism matches completion candidates against
the typed text, so strict pre-filtering isn't necessary.
This is a first step towards supporting postfix snippets (like
`items@insert` in luals)
Problem: When an lsp client is stopped, the client will
only clear the diagnostics for the attached buffers but
not the unattached buffers.
Solution: Reset the diagnostics for the whole namespace rather than
for only the attached buffers.
Problem: Testing the shell option is incomplete and spread out.
Solution: Move shell tests to one file and increase coverage. (Yegappan
Lakshmanan, closesvim/vim#8464)
054794c20f
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: There is no easy way to configure the behavior of the default
diagnostic "jump" mappings. For example, some users way want to show the
floating window, and some may not (likewise, some way want to only move
between warnings/errors, or disable the "wrap" parameter).
Solution: Add a "jump" table to vim.diagnostic.config() that sets
default values for vim.diagnostic.jump().
Alternatives: Users can override the default mappings to use the exact
options to vim.diagnostic.jump() that they want, but this has a couple
issues:
- While the default mappings are not complicated, they are also not
trivial, so overriding them requires users to understand
implementation details (specifically things like setting "count"
properly).
- If plugins want to change the default mappings, or configure the
behavior in any way (e.g. floating window display), it becomes even
harder for users to tweak specific behavior.
vim.diagnostic.config() already works quite well as the "entry point"
for tuning knobs with diagnostic UI elements, so this fits in nicely and
composes well with existing mental models and idioms.
Deprecate vim.diagnostic.goto_prev() and vim.diagnostic.goto_next() in
favor of a unified vim.diagnostic.jump() interface.
We cannot name the function "goto()" because some of our tooling
(luacheck and stylua) fail to parse it, presumably because "goto" is a
keyword in newer versions of Lua.
vim.diagnostic.jump() also allows moving to a specific diagnostic and
moving by multiple diagnostics at a time (useful for creating mappings
that use v:count).
`FileDescriptor` is already a wrapper around an fd and a buffer.
By allowing to just use the buffer without an fd, it can
already handle in-memory reads.
FileDescriptor is used to buffer togheter many small writes to fewer
syscalls. if the data to write already is in a single buffer, it is
perfectly fine to just use os_write directly (which will take care of
the reverse problem: splitting a too big write into many syscalls)
On Windows, '{' is currently not treated as a wildcard char, so another
wildcard char is needed for the pattern to be treated as a wildcard.
It may be worth trying to make '{' always a wildcard char in the future,
but that'll be a bit harder as it'll be necessary to make sure '{' is
escaped at various places.
For many small/simple functions (like those found in shared.lua), the
runtime of vim.validate can far exceed the runtime of the function
itself. Add an "overload" to vim.validate that uses a simple assertion
pattern, rather than parsing a full "validation spec".
Problem:
1. When interacting with multiple :InspectTree and the source buffer
windows there is a high chance of errors due to the window ids not
being updated and validated.
2. Not all InspectTree windows were closed when the source buffer was
closed.
Solution:
1. Update InspectTree window id on `CursorMoved` event and validate
source buffer window id before trying to navigate to it.
2. Close all InspectTree windows
Problem:
NetBSD's libc already has a function by the same name.
Solution:
Rename popcount to xpopcount and add #if defined(__NetBSD__) to
prefer NetBSD's own implementation. This fixes#28983.
Problem: getregionpos() behaves inconsistently for a partly-selected
multibyte char.
Solution: Always use column of the first byte for a partly-selected
multibyte char (zeertzjq).
closes: vim/vim#14851ef73374dc3
Problem: Invalid marks appear to be revalidated multiple times, and
decor is added at the old position for unpaired marks.
Solution: Avoid revalidating already valid marks, and don't use old
position to add to decor for unpaired marks.
Problem: Fix added in #28676 worked accidentally(used variables were
themselves uninitialized at this point during startup) and
does not always work.
Solution: Reset attributes when clearing regions during startup.
Problem: :TOhtml doesn't properly handle virtual text when it has
multiple highlight groups. It also improperly calculates position offset
for multi-byte virt_text characters.
Solution: Apply the `vim.api.nvim_strwidth` broadly to properly
calculate character offset, and handle the cases where the `hl` argument
can be a table of multiple hl groups.
* Add space in template for 'commentstring'
* Add 'comments' and 'commentstring' support to debcontrol
* debversions: Move Ubuntu releases outside of standard support to unsupported
Although trust, xenial, and bionic are not EOL yet, their standard support period has ended.
Reported-by: Riley Bruins <ribru17@gmail.com>
0076ddc07d
Co-authored-by: James McCoy <jamessan@debian.org>
Co-authored-by: Riley Bruins <ribru17@gmail.com>
This makes screen:snapshot_util() generate code with the new
screen:add_extra_attr_ids { ... } pattern. For convenience,
the old-style configuration is still detected and supported (until
all tests have been refactored, which is my goal for the 0.11 cycle)
Remove the last traces of the "ignore" attr anti-pattern. This code
is no longer functional, it is just "ignore" argument being passed around
like a hot potato at this point.
In command_line_scan() for MSWIN, expand "~\" or "~/" prefixed paths to
the USERPROFILE environment variable for the user's profile directory.
Fix#23901
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Problem: there is missing default title highlight when highlight not defined in title text chunk.
Solution: when attr is not set use default title highlight group.
This is mostly an aesthetic change, although there are a few new pieces
of information included. Originally I wanted to investigate including
server capabilities in the healthcheck, but until we have the ability to
fold/unfold text in health checks that would be too much information.
Problem: Can't use a blockwise selection with a width for getregion().
Solution: Add support for blockwise selection with width like the return
value of getregtype() or the "regtype" value of TextYankPost
(zeertzjq).
closes: vim/vim#14842afc2295c22
The LSP quickstart can act as our true "entrypoint" for answering the
question "How do I use LSP in Neovim?" As such, it can be a little more
beginniner-friendly than other sections of our help docs by including
explanatory comments and a more fleshed out example (including a
`FileType` autocommand).
This also includes some other minor wording updates and points users
toward `:checkhealth lsp`.
The new default SwapExists autocommand displays warning text (W325) but
does not use the WarningMsg highlight group as other warnings do. Use
the WARN log level when displaying this warning.
Problem: function get_lval() is too long
Solution: factor out the get_lval_subscript() function
(Yegappan Lakshmanan)
closes: vim/vim#1483944cadaa18c
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Strange error message when using islocked() with a number.
(Yegappan Lakshmanan)
Solution: Check that the name is empty.
1840a7b4e3
Use ll_name_len instead.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: `CompleteDone` currently does not specify the reason for why completion was done, which is problematic for completion plugins as they cannot know whether the event was triggered due to the completion being canceled, accepted, or for some other reason.
Solution: Add a `reason` key to `v:event`, which is set by `CompleteDone` to indicate why completion ended.
Deprecation with vim.deprecate is currently too noisy. Show the
following warning instead:
[function] is deprecated. Run ":checkhealth vim.deprecated" for more information.
The important part is that the full message needs to be short enough to
fit in one line in order to not trigger the "Press ENTER or type command
to continue" prompt.
The full information and stack trace for the deprecated functions will
be shown in the new healthcheck `vim.deprecated`.
In other words, `gx` works regardless of where it was used in
`[...](https://...)`. This only works on markdown buffers.
Co-authored-by: ribru17 <ribru17@gmail.com>
Problem: Cannot filter the history
Solution: Implement :filter :history
closes: vim/vim#1483542a5b5a6d0
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: getregionpos() can't properly indicate positions beyond eol.
Solution: Add an "eol" flag that enables handling positions beyond end
of line like getpos() does (zeertzjq).
Also fix the problem that a position still has the coladd beyond the end
of the line when its column has been clamped. In the last test case
with TABs at the end of the line the old behavior is obviously wrong.
I decided to gate this behind a flag because returning positions that
don't correspond to actual characters in the line may lead to mistakes
for callers that want to calculate the length of the selected text, so
the behavior is only enabled if the caller wants it.
closes: vim/vim#148382b09de9104
Problem: Wrong Ex command executed when :g uses '?' as delimiter and
pattern contains escaped '?'.
Solution: Don't use "*newp" when it's not allocated (zeertzjq).
closes: vim/vim#148373074137542
- fix floating_modifier $mod normal|inverse was being hightlighted as error
reverting the floating_modifier change from dd83b63
- will currently allow invalid syntax after floating_modifier
fixes: vim/vim#14826closes: vim/vim#1482722ac941208
Co-authored-by: James Eapen <james.eapen@vai.org>
Co-authored-by: JosefLitos <litosjos@fit.cvut.cz>
Problem: statusline for non-active window can be hard to distinguish
from normal text with 'notermguicolors'. It was set to use only bold
text to find a balance between being not too similar to active
statusline and normal text, and be supported in enough terminal
emulators (if it does not support 'termguicolors' there is higher
chance that it also does not support underline).
Solution: reconsider balance by placing more emphasis on making
non-active statusline more distinguishable.
This also results into tabline being shown with underline which
aligns with "make more distinguishable" shift.
Problem: Currently comment detection, addition, and removal are done
by matching 'commentstring' exactly. This has the downside when users
want to add comment markers with space (like with `-- %s`
commentstring) but also be able to uncomment lines that do not contain
space (like `--aaa`).
Solution: Use the following approach:
- Line is commented if it matches 'commentstring' with trimmed parts.
- Adding comment is 100% relying on 'commentstring' parts (as is now).
- Removing comment is first trying exact 'commentstring' parts with
fallback on trying its trimmed parts.
Problem:
Not using minified version of bootstrap.
Don't need to load normalize with new version of bootstrap.
See https://github.com/neovim/neovim.github.io/pull/350
Solution:
Update link to bootstrap file.
Remove link to normalize.
Problem: Wrong yanking with exclusive selection and virtualedit=all,
and integer overflow when using getregion() on it.
Solution: Set coladd when decreasing column and 'virtualedit' is active.
Add more tests for getregion() with 'virtualedit' (zeertzjq).
closes: vim/vim#14830701ad50a9e
Problem: The set_ref_in_item() function is too long.
Solution: Use a separate function for more complicated types. (Yegappan
Lakshmanan, closesvim/vim#11802)
ea125393af
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: closure cannot store value in outer context.
Solution: Make storing value in outer context work. Make :disassemble
accept a function reference.
b68b346e6d
Funcstack is Vim9script-only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: getregionpos() doesn't handle one char selection.
Solution: Handle startspaces differently when is_oneChar is set.
Also add a test for an exclusive charwise selection with
multibyte chars (zeertzjq)
closes: vim/vim#1482552a6f34887
This will help manage the overly granular checkhealth completion to go
from
```
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
to
```
vim.health
vim.lsp
vim.provider
vim.treesitter
```
`vim.health` is not a "plugin" but part of our Lua API and the
documentation should reflect that. This also helps make the
documentation maintenance easier as it is now generated.
Problem: tests: some issues with termdebug mapping test
Solution: Use assert_{true,false} if suitable, change
order of expected and actual arguments in assert() calls.
(Ken Takata)
closes: vim/vim#14818
related: 7fbbd7f
ffed1540f3
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: Tag guessing leaves wrong search history with very short names
(after 9.1.0426).
Solution: Use the correct variable for pattern length (zeertzjq).
closes: vim/vim#1481742cd192daa
Cherry-pick Test_tagbsearch() changes from patch 9.0.0767.
Problem: too many strlen() calls in search.c
Solution: refactor code and remove more strlen() calls,
use explicit variable to remember strlen
(John Marriott)
closes: vim/vim#147968c85a2a49a
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: The changetracking state can de-sync when reloading a buffer
with more than one LSP client attached.
Solution: Fully detach all clients from the buffer to force buf_state to
be re-created.
Problem: Docs about how to obtain backtraces on Linux is not very
beginner-friendly; some users used to have difficulties in getting
stacktrace against Nvim crash.
For instance, the `core` dump file might not appear in the current
directory on Ubuntu systems with apport, and the current docs do not
fully cover such cases.
Solution: Add more hints about where core dump files can be found. For
example, on Ubuntu where apport is managing core dump files, users would
want to find them in `/var/lib/apport/coredump`.
Problem: layout i.e. whitespace that is part of codelenses is currently
displayed as weird symbols and large amounts of spaces
Solution: replace all consecutive whitespace symbols with a single space
character when trying to display codelenses as virtual text
Problem:
Higher-priority signs may be hidden by lower-priority signs.
Solution:
Place higher-priority signs from the left.
Example:
nvim_buf_set_extmark(0, ns, 0, -1, {sign_text='H', priority=1})
nvim_buf_set_extmark(0, ns, 0, -1, {sign_text='W', priority=2})
nvim_buf_set_extmark(0, ns, 0, -1, {sign_text='E', priority=3})
Before:
| |
H | W E |
^ | |
Not visible
After:
| |
| E W | H
| | ^
Not visible
Fixes#16632
Problem: vim-patch commits lack an informative title and summary in the
very first line of the commit message when the vim-revision is a Git SHA
hash, unlike when is a Vim version. This makes it difficult to discern
at a glance what changes are introduced by such vim-patch commits (in
git log, PR title, changelog generated by git-cliff, etc.).
BEFORE:
vim-patch:abcdef123456
runtime(vim): improve performance
<some details>
...
Solution: Repeat the title of the upstream commit message, to improve
the clarity and visibility of the commit message.
AFTER:
vim-patch:abcdef123456: runtime(vim): improve performance
<some details>
...
Note: the `vim-patch:<hash>` token is still needed by `vim-patch.sh`
(but not necessarily in the very first line of the commit message) to
determine which vim patches have been applied. `<hash>` is internally
normalized to 7 hex digits.
Problem: Vim9: CTRL-] used in :def function does not work.
Solution: Omit count or prepend colon. (closesvim/vim#6769)
b3ea36c5bc
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: block_editing errors out when using del
(@Jamarley)
Solution: Change ins_len from size_t to int and
properly check that it doesn't become negative
There is a check in os.c that verifies that `ins_len` does not become
negative:
```
if (pre_textlen >= 0 && (ins_len = len - pre_textlen - offset) > 0)
```
However this only works, if ins_len can actually become negative and
unfortunately, ins_len has been declared as `size_t` so instead of
becoming negative it will wrap around and be very large.
So let's define it as integer, after which the condition above
properly catches this condition.
fixes: vim/vim#14734closes: vim/vim#14735d5c8c0920e
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: getregionpos() wrong with blockwise mode and multibyte.
Solution: Use textcol and textlen instead of start_vcol and end_vcol.
Handle coladd properly (zeertzjq).
Also remove unnecessary buflist_findnr() in add_regionpos_range(), as
getregionpos() has already switched buffer.
closes: vim/vim#14805c95e64f41f
Problem: regionpos may leak memory on error, coverity
complains about dereferencing Null pointer
Solution: free all list pointers (after v9.1.394),
return early if buflist_findnr() returns NULL
closes: vim/vim#14731b8ecedce79
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot get a list of positions describing a region
(Justin M. Keyes, after v9.1.0120)
Solution: Add the getregionpos() function
(Shougo Matsushita)
fixes: vim/vim#14609closes: vim/vim#14617b4757e627e
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
runtime(arduino): Add Arduino ftplugin and indent files (vim/vim#14811)
We already have Arduino syntax file, but we didn't have ftplugin and
indent files.
This commit adds a basic ftplugin file and a basic indent file.
Both of them are derived from {ftplugin,indent}/c.vim.
957d903cb7
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: too many strlen() calls in the regexp engine
Solution: refactor code to retrieve strlen differently, make use
of bsearch() for getting the character class
(John Marriott)
closes: vim/vim#1464882792db631
Cherry-pick keyvalue_T and its comparison functions from patch 9.1.0256.
vim-patch:9.1.0410: warning about uninitialized variable
vim-patch:9.1.0412: typo in regexp_bt.c in DEBUG code
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: On nvim 11.0-dev, deprecation warnings due to an use of
hard-deprecated APIs such as:
- `vim.diagnostic.disable()`
- `vim.diagnostic.is_disabled()`
etc. are not accompanied by backtrace information. It makes difficult
for users to figure out which lines or which plugins are still using
deprecated APIs.
Solution: use `backtrace = true` in vim.deprecate() call.
The namespacing for healthchecks for neovim modules is inconsistent and
confusing. The completion for `:checkhealth` with `--clean` gives
```
nvim
provider.clipboard
provider.node
provider.perl
provider.python
provider.ruby
vim.lsp
vim.treesitter
```
There are now three top-level module names for nvim: `nvim`, `provider`
and `vim` with no signs of stopping. The `nvim` name is especially
confusing as it does not contain all neovim checkhealths, which makes it
almost a decoy healthcheck.
The confusion only worsens if you add plugins to the mix:
```
lazy
mason
nvim
nvim-treesitter
provider.clipboard
provider.node
provider.perl
provider.python
provider.ruby
telescope
vim.lsp
vim.treesitter
```
Another problem with the current approach is that it's not easy to run
nvim-only healthchecks since they don't share the same namespace. The
current approach would be to run `:che nvim vim.* provider.*` and would
also require the user to know these are the neovim modules.
Instead, use this alternative structure:
```
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
and
```
lazy
mason
nvim-treesitter
telescope
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
Now, the entries are properly sorted and running nvim-only healthchecks
requires running only `:che vim.*`.
The optimizations that vim.iter uses for array-like tables don't require
that the source table has no holes. The only thing that needs to change
is the determination if a table is "list-like": rather than requiring
consecutive, integer keys, we can simply test for (positive) integer
keys only, and remove any holes in the original array when we make a
copy for the iterator.
Problem: Unable to leave long line with 'smoothscroll' and 'scrolloff'.
Corrupted screen near the end of a long line with 'scrolloff'.
(Ernie Rael, after 9.1.0280)
Solution: Only correct cursor in case scroll_cursor_bot() was not itself
called to make the cursor visible. Avoid adjusting for
'scrolloff' beyond the text line height (Luuk van Baal)
b32055e504
vim-patch:9.1.0416: some screen dump tests can be improved
Problem: some screen dump tests can be improved (after 9.1.0414)
Solution: Make sure screen state changes properly and is captured in the
screen dumps (Luuk van Baal)
2e642734f4
Problem:
`vim.rpcnotify(0)` and `rpcnotify(0)` are documented as follows:
If {channel} is 0, the event is broadcast to all channels.
But that's not actually true. Channels must call `nvim_subscribe` to
receive "broadcast" events, so it's actually "multicast".
- Assuming there is a use-case for "broadcast", the current model adds
an extra step for broadcasting: all channels need to "subscribe".
- The presence of `nvim_subscribe` is a source of confusion for users,
because its name implies something more generally useful than what it
does.
Presumably the use-case of `nvim_subscribe` is to avoid "noise" on RPC
channels not expected a broadcast notification, and potentially an error
if the channel client reports an unknown event.
Solution:
- Deprecate `nvim_subscribe`/`nvim_unsubscribe`.
- If applications want to multicast, they can keep their own multicast
list. Or they can use `nvim_list_chans()` and `nvim_get_chan_info()`
to enumerate and filter the clients they want to target.
- Always send "broadcast" events to ALL channels. Don't require channels
to "subscribe" to receive broadcasts. This matches the documented
behavior of `rpcnotify()`.
Use uv_fs_realpath() instead.
It seems that uv_fs_realpath() has some problems on non-Linux platforms:
- macOS and other BSDs: this function will fail with UV_ELOOP if more
than 32 symlinks are found while resolving the given path. This limit
is hardcoded and cannot be sidestepped.
- Windows: while this function works in the common case, there are a
number of corner cases where it doesn't:
- Paths in ramdisk volumes created by tools which sidestep the Volume
Manager (such as ImDisk) cannot be resolved.
- Inconsistent casing when using drive letters.
- Resolved path bypasses subst'd drives.
Ref: https://docs.libuv.org/en/v1.x/fs.html#c.uv_fs_realpath
I don't know if the old implementation that uses uv_chdir() and uv_cwd()
also suffers from the same problems.
- For the ELOOP case, chdir() seems to have the same limitations.
- On Windows, Vim doesn't use anything like chdir() either. It uses
_wfullpath(), while libuv uses GetFinalPathNameByHandleW().
Problem:
'modeline' and 'note' are unhandled in the online HTML documentation.
Some (not all) modelines are parsed by the vimdoc parser as a node of
type 'modeline'.
Solution:
- Ignore 'modeline' in HTML rendering.
- Render 'note' text in boldface.
Problem: `has-ancestor?` is O(n²) for the depth of the tree since it iterates over each of the node's ancestors (bottom-up), and each ancestor takes O(n) time.
This happens because tree-sitter's nodes don't store their parent nodes, and the tree is searched (top-down) each time a new parent is requested.
Solution: Make use of new `ts_node_child_containing_descendant()` in tree-sitter v0.22.6 (which is now the minimum required version) to rewrite the `has-ancestor?` predicate in C to become O(n).
For a sample file, decreases the time taken by `has-ancestor?` from 360ms to 6ms.
For notable changes, see runtime/doc/news.txt (or `:help news` in Nvim).
Following is a list of fixes/features commits.
BREAKING
--------------------------------------------------------------------------------
- 649dd00fe2 remove deprecated functions
- 0370e4def0 remove neovim qt
- 880f7d12fe remove vimballs (#22402)
- c48b1421af rename "playground" => "dev" #23919
- 2f85bbe615 rewrite TOhtml in lua
- abe39f2b24 api: change return type of nvim_win_text_height to Dict (#24365)
- 7180ef6901 api: nvim_open_win: noautocmd blocks all autocmds #28192
- 700cab0068 events: trigger CursorMoved later on switching window (#23711)
- e4a136f713 ex_cmds: remove :behave
- e5e0bda41b lsp: add vim.lsp.status, client.progress and promote LspProgressUpdate (#23958)
- 5a363ccac8 lsp: deprecate trim_empty_lines
- 5a2536de0c lsp: move changetracking to separate file (#26577)
- 58618d208a lsp: promote LspRequest to a full autocmd and enrich with additional data (#23694)
- 1b9ccd38a1 lsp: rename vim.lsp.get_active_clients to get_clients (#24113)
- eb1f0e8fcc lsp: replace snippet parser by lpeg grammar
- 448907f65d lsp: vim.lsp.inlay_hint.get(), enable(), is_enabled() #25512
- 7caf0eafd8 lua: add stricter vim.tbl_islist() and rename old one to vim.tbl_isarray() (#16440)
- 747264320c mappings: remove #n as a notation for a function key (#17318)
- f7da472257 options: graduate shortmess+=f flag
- c3d1d9445c options: graduate some more shortmess flags
- 5df4fdf253 options: make OptionSet `v:` values use typval
- 881d17a113 options: remove compatible behaviours for vim 5.0 and earlier
- e19cc9c9b7 options: unify `set_option` and `set_string_option`
- db590e96d5 startup: "nvim -l" message does not end with newline #24215
- 2ca076e45f treesitter: incremental injection parsing
- f5dc453109 treesitter: new standard capture names
- fc0ee871de treesitter: remove deprecated legacy injection format
- 6debb18523 treesitter: remove duplicated diagnostic code (#24976)
- 18da6964cc vim.iter: remove vim.iter.map/filter/totable #26138
- 9b028bd64f vim.iter: rename xxback() => rxx() #28503
- 8d4a53fe6e vim.json: remove global options, "null", "array_mt" #24070
- 40ce857797 vim.ui: change open() to return `result|nil, errmsg|nil` #28612
- e0d92b9cc2 vim.ui: change open() to return pcall-like values #28502
FEATURES
--------------------------------------------------------------------------------
- a66b0fdfaa NVIM_APPNAME supports relative paths #25233
- c0beb8173f add .luarc.json (#24592)
- 14b7ffcf89 add __call typing for vim.inspect()
- ca7e488cfe add link in issue template to minimal config template
- 4bf47222c9 add vim.text module (#26069)
- 0ebc4de0ff allow opting in to builtin clipboard providers (#28083)
- e8d3c4cccb generate types and docs for v variables
- 29fe883aa9 ignore swapfile for running Nvim processes #25336
- 28d1640dd6 improve return type annotations for vim.api.*
- 199a990c9e report "build" in vim.version() #23925
- e688793253 tostring(vim.version())
- c559ab0ae6 update unicode tables (#27317)
- ecdb6465e2 vim.version() returns a Version object
- 4b60267f82 :source: source current ft=lua buffer as Lua code (#23802)
- 428edcde70 api: add forward and back mouse buttons
- 037ea6e786 api: add nvim__redraw for more granular redrawing
- ca9f6f5694 api: add nvim_tabpage_set_win (#27222)
- db8fe63a93 api: add nvim_win_text_height (#24236)
- 16513b3033 api: allow floats to be opened in non-current tabpage (#28480)
- 6b4970f6e0 api: allow open_win/win_set_buf in the cmdwin in some cases
- 5d921e28c1 api: allow win_close in cmdwin to close wins except previous
- 472271199e api: allow win_hide to close cmdwin or non-previous windows
- 6bba4beced api: make nvim_open_win support non-floating windows (#25550)
- b162adbb7c api: pass 0 to nvim_get_chan_info for current channel (#27321)
- 42bbc4fabc api: support abbreviations in nvim_set_keymap
- 98a4ed0a11 api: support getting abbreviations (#26868)
- d3d7d763f3 builtin: improve types
- 748bc4d22d clipboard: add OSC 52 clipboard support
- db57df04b6 clipboard: enable OSC 52 clipboard provider by default (#26064)
- 734848dc1a colorscheme: add semantic tokens modifiers to builtin color scheme
- 1e0996b572 colorscheme: update treesitter groups
- 73de98256c comment: add built-in commenting
- ae4ca4edf8 complete: support f flag for complete buffer part
- 01c51a4913 completion: support completing more string options
- ae3685798d decoration: allow conceal_char to be a composing char
- 30a5c28c87 decoration_provider: log errors as error messages
- 9711370c26 defaults: add :Inspect to right-click menu (#28181)
- 2613ba5000 defaults: enable 'termguicolors' by default when supported by terminal
- 513fc46195 defaults: improve :grep defaults #28545
- c26dc1f77c defaults: map Q and @x to repeat in Visual mode (#26495)
- 8758c6fb87 defaults: set g:netrw_use_errorwindow = 0 #24179
- 1d81d7a268 defaults: treat "•" as a list item prefix #24623
- 20b38677c2 defaults: use ripgrep (rg) for 'grepprg' if available
- 61063653b0 defaults: visual CTRL-R for LSP mappings #28537
- 4ee656e4f3 diagnostic: add `vim.diagnostic.count()` (#26807)
- 73034611c2 diagnostic: add default mappings for diagnostics (#16230)
- fc6d713dd8 diagnostic: add support for many namespaces filtering in GetOpts (#28045)
- 5ed9916a28 diagnostic: enable(…, opts)
- e780177506 diagnostic: filter diagnostics by specific severities (#24736)
- b13e63db1d diagnostic: goto functions jump to highest severity (#28490)
- 26765e8461 diagnostic: is_enabled, enable(…, enable:boolean)
- 9cb7e00b97 diagnostic: provide more control over virtual text display (#24724)
- ee41153a94 diagnostic: revert default behaviour of goto_next/prev()
- 07b60efd80 diagnostic: specify diagnostic virtual text prefix as a function
- a3b3978474 diagnostics: support numhl and linehl for diagnostic signs
- 0381f5af5b diff: grouping optimization for linematch algorithm
- 42333ea98d docs: generate builtin.txt (#24493)
- 9beb40a4db docs: replace lua2dox.lua
- 1d4a5cd185 eval: exists() function supports checking v:lua functions (#26485)
- 4a1ad676ce ex_cmds: no error on :lua with {range} and {code} (#27290)
- c2433589dc ex_cmds: ranged :lua #27167
- b04286a187 extmark: support proper multiline ranges
- 1c032ad703 extmark: window scoped extmark
- 68cb4a7405 extmarks: add "undo_restore" flag to opt out of undo-restoring
- 4e6f559b8c extmarks: add 'invalidate' property to extmarks
- c249058758 extmarks: add sign name to extmark "details" array
- bbd5c6363c extmarks: add virt_text_repeat_linebreak flag (#26625)
- 15e77a56b7 extmarks: subpriorities (relative to declaration order) (#27131)
- f0884f21fa extmarks: support hl_mode "combine" for inline virt_text (#24099)
- 372aa2eb3d float: add fclose command
- 35570e4a11 float: implement footer
- 4200a0f167 float: support toggle show float window
- 1233ac467d fold: transparent foldtext
- 71530cc972 folds: support virtual text format for 'foldtext' (#25209)
- 38b9c322c9 fs: add vim.fs.root (#28477)
- e3e6fadfd8 fs: expose join_paths as `vim.fs.joinpath` (#23685)
- bc67cf3ccd gen_help_html: add anchors to help tags #25112
- b0cf9c5fee gen_help_html: ignore pi_netrw.txt errors
- 81d8fce8f9 gen_help_html: non-default vimdoc.so parser
- da09f9b551 gen_lsp.lua: protocol.Methods #24504
- f41496ce74 gen_lsp.lua: sort by name, handle failure #24504
- 3692fd4c87 gen_lsp.lua: validate CLI args #26514
- 2ff2785c39 health: checkhealth buffer can show in a split window (#26714)
- 4382d2ed56 health: fold successful healthchecks #22866
- d1bc6fca71 health: list attached buffers in LSP report #23561
- 2877672d70 health: make :checkhealth support more split modifiers (#26731)
- ddda5e0a48 help: hide filename of "gO" outline using conceal #27547
- e72c0cd920 highlight: Allow hyphens (-) in highlight group names (#24714)
- 986bf7e78d highlight: add `FloatFooter` highlight group
- 574519d9d6 highlight: tweak default color scheme
- 64a14026d7 highlight: update default color scheme
- a79694a08e issue_template: instruct not to include a package manager
- 69ffbb76c2 iter: add `Iter.take` (#26525)
- cebc00603e l10n: update Turkish translations #24246
- fec51229c4 l10n: update Ukrainian translations (#24882)
- 996dd36c77 lsp: add actionable advice to lsp client quit error msg (#24510)
- 4ff3217bbd lsp: add fswatch watchfunc backend
- 643546b82b lsp: add handlers for inlay hints (#23736)
- 317c80f460 lsp: add method filter to get_active_clients (#24319)
- 6888607415 lsp: add more LSP defaults (#28500)
- 0fe86f7e24 lsp: add opts paramater to vim.lsp.codelens.refresh
- 131a1ee82d lsp: add original LSP Location as item's user_data in locations_to_items (#23743)
- f1775da07f lsp: add snippet API (#25301)
- db0ec84fb4 lsp: add type annotations for lsp.util.locations_to_items (#26694)
- f190f758ac lsp: add vim.lsp.buf.subtypes(), vim.lsp.buf.supertypes() (#28388)
- 451bc50d40 lsp: deprecate severity_limit
- e9b85acfbb lsp: enable workspace/didChangeWatchedFiles by default (#23190)
- 4a09c178a1 lsp: fallback to code-action command on resolve failure (#25464)
- 2f22ed6a00 lsp: handle multiple clients in omnifunc (#24381)
- 63b3408551 lsp: implement textDocument/diagnostic (#24128)
- 5e3cf9fb4b lsp: improve control over placement of floating windows (#24494)
- 15641f38cf lsp: include positionEncodings in default client capabilities
- ddd92a70d2 lsp: initial support for dynamic capabilities (#23681)
- ca5de9306c lsp: inlay hints #23984
- 350d818564 lsp: inlay_hint.is_enabled({filter}) #28523
- 33e1a8cd70 lsp: map K to hover by default #24331
- 97bea3163a lsp: more annotations
- 37079fca58 lsp: move inlay_hint() to vim.lsp (#24130)
- 12c2c16acf lsp: opt-in to dynamicRegistration for inlay hints (#24102)
- a49924a318 lsp: remove notify from vim.lsp.buf_detach_client (#25140)
- 8149bd089e lsp: report fswatch errors
- fb54e6980e lsp: set client offset_encoding if server supports positionEncoding
- 96e19533f6 lsp: set kind in select call for codelens #23889
- 9af3559643 lsp: set workDoneToken in initialize request (#28182)
- f736b075d3 lsp: snippet parsing using lpeg
- 134b9ec483 lsp: soft deprecate vim.lsp.for_each_buffer_client (#24104)
- 63f9c2da9a lsp: support completion itemDefaults
- 3f788e73b3 lsp: support connect via named pipes/unix domain sockets (#26032)
- 7e36c8e972 lsp: support for choice snippet nodes
- 5c40f3e86a lsp: support vim.lsp.ListOpts.loclist in location_handler()
- abd2352bd8 lsp: update LSP protocol 3.18 typings to date (#28730)
- cfd4a9dfaf lsp: use treesitter for stylize markdown
- d5063f4b29 lsp: vim.lsp.inlay_hint.enable(nil) applies to all buffers #28543
- c0952e62fd lua: add `vim.system()`
- 9248dd77ac lua: add hl priority opts on yank (#23509)
- 6425869771 lua: add meta file for vim submodules (#24525)
- 3734519e3b lua: add noref to deepcopy
- 7c661207cc lua: add ringbuffer (#22894)
- 877d04d0fb lua: add vim.func._memoize
- ab1edecfb7 lua: add vim.iter (#23029)
- d675bd01b1 lua: allow vim.F.if_nil to take multiple arguments (#22903)
- c379d72c49 lua: allow vim.wo to be double indexed (#20288)
- e52c25b761 lua: deprecate vim.tbl_add_reverse_lookup
- f1dfe32bf5 lua: enable(enable:boolean, filter:table) #28374
- 5b40a1c09d lua: implement Iter:join() (#26416)
- c01e624b07 lua: more specific error messages for vim.api type checking
- e1ff2c51ca lua: pass keys before mapping to vim.on_key() callback (#28098)
- 2db719f6c2 lua: rename vim.loop -> vim.uv (#22846)
- 6c0812d92e lua: specific error messages for type checking `opts` params
- fd089c8e50 lua: typing for vim.fn.* (#24473)
- 302d3cfb96 lua: use callable table as iterator in vim.iter (#23957)
- 51c754b62e lua: use keyset type information
- 8e5c48b08d lua: vim.fs.normalize() resolves ".", ".." #28203
- 7e70ca0b48 lua: vim.keycode (#22960)
- 9e86f473e0 lua: vim.region accepts getpos() arg (#22635)
- 4d04feb662 lua: vim.tbl_contains supports general tables and predicates (#23040)
- 48d533272e lua-types: types for vim.api.* (#24523)
- 25e7299707 man: allow opening pages in current window (#27861)
- 08db61b19b man: respect 'wrapmargin' when wrapping man pages (#24091)
- f9944a78bc meta: add types for vim.lpeg
- deb6fd6704 msgpack-rpc: show actual request id in error message
- 01fe6b9e6a msgpack_rpc: support out-of-order responses on `msgpack-rpc`
- 619407eb54 nvim_open_term: convert LF => CRLF (#26384)
- e98decf9a6 quickfix: support -q - to read 'errorfile' from stdin (#27303)
- 7b0123dd6a remote: avoid --remote-ui infinite loop (#24465)
- cca6c4c698 rpc: allow empty string key in msgpack => Vim conversion
- d0d4160dd1 runtime: highlight hl groups in syntax.txt (#25050)
- 5f4895200a scripts: add lsp_types.lua (#23750)
- 4e6096a67f server: allow embed with listen (#25709)
- 170c890dca shortmess: "q" flag fully hides recording message (#27415)
- d3582e102b statuscolumn: re-evaluate for every screen line (#25885)
- 224f303ee5 stdlib: add vim.base64 module (#25843)
- fa131de9ad tabline: middle mouse button now closes tab (#27522)
- c855eee919 term: enable reflow by default (#21124)
- cd1b14f027 termdebug: improve `:Evaluate` floating window (#26621)
- cffdf102d4 terminal: allow :terminal to take modifiers (#15427)
- 0c89854da1 terminal: close shell terminals automatically
- 7589336120 terminal: respond to OSC background and foreground request (#17197)
- beca827212 terminal: trigger TermRequest autocommand events (#22159)
- c6ec7fa8d7 treesitter: add 'injection.self' and 'injection.parent'
- 6cfca21bac treesitter: add `@injection.filename`
- 5d8ab32f38 treesitter: add a query editor (#24703)
- cb0a1a10b2 treesitter: add bash parser and queries
- bb15fa0356 treesitter: add folding for `InspectTree` (#27518)
- 9ce1623837 treesitter: add foldtext with treesitter highlighting (#25391)
- 31c4ed26bc treesitter: add injection language fallback (#24659)
- 28f54a7878 treesitter: add lang parameter to the query editor (#25181)
- 88c8803aa1 treesitter: add python parser and queries
- c194acbfc4 treesitter: add query_linter from nvim-treesitter/playground (#22784)
- af040c3a07 treesitter: add support for setting query depths
- 11844dde81 treesitter: bundle markdown parser and queries (#22481)
- 5e6240ffc2 treesitter: handle quantified fold captures
- f69658bc35 treesitter: highlight Lua files by default (#26824)
- 988b472d90 treesitter: highlight help files by default (#26347)
- 845d5b8b64 treesitter: improve query error message
- 189fb62032 treesitter: improved logging (#23638)
- c0b99bb1de treesitter: show root nodes in :InspectTree (#26944)
- cb46f6e467 treesitter: support URLs (#27132)
- ff6092b4ee treesitter: update Bash parser and queries to v0.21.0
- 8dda630ae9 treesitter: update C parser and queries to v0.21.0
- 3836eeb901 treesitter: update C queries from upstream
- aca4ad430b treesitter: update Lua parser and queries to v0.1.0
- 5e875ae8d0 treesitter: update Markdown parsers and queries to v0.2.1
- 8a3385dde7 treesitter: update Python parser and queries to v0.21.0
- 20dcbaaaf8 treesitter: update Vim parser and queries to v0.4.0
- 987dff6713 treesitter: update Vimdoc parser and queries to v2.4.0
- 1384bebd5a treesitter: update query parser to v0.2.0
- 668f16bac7 treesitter: upstream query omnifunc from playground (#23394)
- a478bf936b treesitter: use 0-based indexing to show ranges in `:InspectTree`
- ac8ed77afb tui: add 'termsync' option (#25871)
- 4ee9e58056 tui: query extended underline support using DECRQSS (#28052)
- b4b7ca2d54 tui: support DCS responses in TermResponse event (#26061)
- 622ae2f53e tui: support Super and Meta modifiers (#24357)
- a142670360 tui: support undercurl in WezTerm (#28037)
- 56627ca242 tui: use TermResponse event for OSC responses (#25868)
- 32b49448b2 tutor: add Japanese tutor #27268
- 9c2270b834 types: add `test/.luarc.json`
- d3a8e9217f ui: add chdir UI event (#27093)
- 6ea6b3fee2 ui: add support for OSC 8 hyperlinks (#27109)
- b72931e704 ui: allow non-zero 'cmdheight' with ext_messages
- 2615ed879e ui: allow to get the highlight namespace
- e38027ef69 ui: completeopt support popup like vim
- 2e4e12756a ui: indicate margins for the area used by win_viewport
- efa9b299a7 ui: inline virtual text
- dacd34364f ui-ext: make 'mousehide' into proper ui_option (#25532)
- 43ded8d358 version: unverbose ":version", ":verbose version" #24195
- 0a598c13b1 vim.deprecate: only issue warning if neovim version is high enough
- a767c046f4 vim.iter: add Iter:flatten (#26786)
- af6e6ccf3d vim.ui: vim.ui.open, "gx" without netrw
- fa4b02fa67 vim.version: add `vim.version.le` and `vim.version.ge`
- 27a566f3f8 vimdoc: support Markdown code blocks (#25127)
FIXES
--------------------------------------------------------------------------------
- f5573fba3d Remove nested for_each_tree in TSTreeView (#26328)
- ae28ef327e adjust error message for error in UI event callback (#28200)
- ebe489d8f0 allow multiline message for echoerr (#25380)
- 592bc831ce avoid ui_grid_cursor_goto when drawing window separators
- d6483793e1 buffer overrun in lmpack_session_receive
- 3bbb0aa399 checkhealth warning even if init.lua exists #25306
- 5cb906e91c correct versions in deprecation warnings
- 118fd8367c deduplicate gen_cflags
- eb4676c67f disallow removing extmarks in on_lines callbacks (#23219)
- 6e9b204afb doc errors
- 77d3526a3d explain that user should run nvim with -V1 to see more information
- fd791db0ec fix ASAN errors on clang 17 (#25469)
- bb38c066a9 fix compiler warning from clang
- 478273a423 fix iter_matches call in query linter (#27496)
- bb7324292c flush UI state before blocking in vim.wait (#25938)
- 44d4ae448d function was renamed (#23772)
- 1dd700a8d9 gf fails on "foo/bar.txt:1:2" on Windows
- 6e703f778f handle argv not present in nvim_get_chan_info
- 56dc8b9212 heap-buffer-overflow in file_name_in_line
- 74b2f6c3d9 ignore non-existent properties during header generation
- f5a09f1b03 invoke changed_bytes when rewriting <Tab> char #25125
- b8273c9a33 lua annotations
- 69d49727d7 luacheck
- 4ce3159e24 missing case in setxattr error handling (#26176)
- 41fb98d6fa move fswatch linux check inside of vim.schedule (#27824)
- ba58c6f8a4 only attempt to close timer if not already closing (#26047)
- b400b947f3 prevent child processes from inheriting ui channel file descriptors
- 99b8a343e1 quick update, squash later
- 83b51b36aa raise TS min version
- a090d43d61 splitting of big UI messages
- 2424c3e696 support UNC paths in vim.fs.normalize
- 43e76cc346 tostring(vim.version()) fails if build is NIL #24097
- 8c7a8be274 transposed xcalloc arguments (#28695)
- 35f453f65d type warnings in shared.lua
- f112ac73bd unreliable "checkhealth completions" test
- b32b5b2711 use BEL to terminate OSC 11 request (#26335)
- d95e3a4c9c use no_ff instead of ffdos as condition
- a1bec02c1e use snprintf instead of sprintf
- ca887b80a9 version-range < and <= #23539
- c1ee187f82 vim.loop in luv threads (#23924)
- fe4583127f vim.validate() order is not deterministic #28377
- be8b15200d windows timeouts have exit code 1
- 1f8fb7c000 :let: fix error when applying operator to boolean option (#24030)
- 5a3752889c NVIM_APPNAME: show error message if $NVIM_APPNAME is invalid
- c4ad15ae32 PVS/V009: add top-level message
- 128e194f64 PVS/V1001: variable is assigned but is not used
- 1bbbca267d PVS/V547: expression is always true/false
- 592e4472da PVS/V564: the '|' operator is applied to bool type value
- 30d311ebcf PVS/V592: expression is enclosed by parentheses twice
- 3ecd45ded0 api: allow negative column arguments for nvim_buf_set_text (#23501)
- 3ac952d4e2 api: avoid assertion when autocmd group id is 0 (#23210)
- b2a8a93147 api: avoid immediate TextChanged with nvim_create_buf (#25492)
- ef7ae66eef api: avoid integer truncation
- b1e24f240b api: avoid open_win UAF if target buf deleted by autocmds
- 0a81ec14a4 api: better topline adjustments in nvim_buf_set_lines
- c18f3cfcdb api: crash after nvim_win_set_config title/footer validation error (#26606)
- aa4e47f704 api: disallow some more functions during textlock
- 22d9338afc api: disallow win_set_buf from changing cmdwin's old curbuf (#24745)
- da979ae04b api: do not re-apply win_config.style when missing
- 344906a08f api: do not update grid position in nvim_win_set_cursor (#28235)
- 22205f36a6 api: don't change title when setting buffer in a window (#23492)
- 711a2f5ff6 api: don't leak memory with nvim_win_get_ns (#27570)
- 1cf51a07a6 api: don't set coladd of mark (#26648)
- 5fd1bac65e api: don't use stl 'fillchar' for "use_statuscol_lnum" (#27501)
- a3751f5de2 api: dont change curwin for nvim_win_set_height
- 1ff4562502 api: dont change curwin for nvim_win_set_width
- 59fed8bb64 api: extmark highlight groups not always included in details (#23179)
- 9b9030ff2c api: fix inconsistent behavior of topline touched in recent refactor
- fc2a56fe61 api: fix set_lines viewport adjustment, but this time good
- b7763d7f6b api: get virtual text with multiple hl properly (#25307)
- b3be7b7413 api: handle NUL in nvim_err_write() and nvim_out_write() (#25354)
- 132bbd1cbd api: handle clearing out last line of non-current buffer
- d942c2b943 api: handle win_split_ins failure properly
- 5cfdaaaeac api: ignore 'autochdir' when renaming other buf (#28376)
- 2fc2343728 api: ignore 'autochdir' when setting buf in other win (#28371)
- 7367838359 api: limit depth of nvim_cmd (#27225)
- 0da27e9bde api: load buffer first on nvim_buf_set_lines (#25823)
- 4e5c633ed4 api: make getting explicit empty hl in virtual text work (#28697)
- d05d63a18f api: make nvim_get_hl not return non-existing groups
- a70eae57bd api: make open_win block only enter/leave events if !enter && !noautocmd
- 5d58136ccc api: make open_win/win_set_config check if splitting allowed
- 4ec8fd43bf api: make width/height for split by nvim_open_win work (#28341)
- b1577d371a api: make win_set_config with "win" for splits need "split/vertical"
- 0330dd9e69 api: mark nvim__complete_set as experimental #28579
- d22172f36b api: more intuitive cursor updates in nvim_buf_set_text
- b051b131f5 api: nvim_buf_get_offset in a new buffer with zero or one lines
- e0453d7f57 api: nvim_cmd{cmd="win_getid"} parsed as :winsize #24181
- 6091df6b7a api: nvim_create_buf assert fails if autocmds set &swapfile
- d5c23d72a5 api: nvim_create_buf leaks memory if buffer is loaded early
- b7708eac24 api: nvim_get_hl should return default flag
- a741c7fd04 api: nvim_parse_cmd error message in pcall() #23297
- e55a502ed4 api: open_win fire Buf* events when !enter && !noautocmd if entered early
- a873f33993 api: open_win fire BufWinEnter for other buffer when !enter && !noautocmd
- e7c262f555 api: patch some cmdwin/textlock holes
- a9968912b7 api: redundant error when using `nvim_cmd` (#24010)
- dbcba26bf1 api: revert unintended change of optional bool params
- b25753381c api: set script context when using nvim_set_hl (#28123)
- d3ea9a04bc api: update "w_scwidth" in nvim_eval_statusline()
- c971f538ab api: update grid cursor in nvim_win_set_cursor()
- 130cb4815a api: use a conditional stack for nvim_cmd (#26341)
- cf9f002f31 api: use correct buffer for "range" in nvim__redraw (#28614)
- 77118d0da8 api: use text_locked() to check textlock
- bcb70eeac4 api: win_set_config autocmds crash when moving win to other tabpage
- 233649bc75 api: win_set_config fires unnecessary autocmds
- b52d15853e api: win_set_config set tp_curwin of win moved from other tabpage
- 54022a2946 api: win_set_config update statuslines after removing splits
- a9cd8467cb api: wrong nvim_buf_set_extmark error for invalid hl_mode
- 4d3a38ac07 api, lua: handle setting v: variables properly (#25325)
- 92760a7f42 api, lua: make blank lines in a message work properly (#24244)
- 08fc1ebbaa api/buffer: fix handling of viewport of non-current buffer
- 24e3ee9d07 api/options: validate buf and win
- 139e6f68f9 autocmd: API functions accept garbage after event name #25523
- 02d00cf3ee backup: E1509 when writing extended attr to symlink (#28014)
- 746a153bc1 base64: only check padding if leftover index is set (#25854)
- 533e01a75b base64: properly handle embedded NULLs when decoding (#28349)
- 095bd8d0f8 buffer: do not filter help buffer
- e5d9b15044 buffer_updates: correct buffer updates when splitting empty line
- 11865dbe39 build: better deps for doc
- ffaf74f147 build: distinguish vim.mpack from global require'mpack'
- f9416470b1 build: include FindPackageHandleStandardArgs
- ade42d531b build: teach cmake about vvars
- da7178cbbf builtin: fix incorrect optional fields for fn.sign_define
- 6fa0f303d7 builtin: parameter mismatch between winsaveview and winrestview
- 3159a2c28f change: update fold after on_bytes (#26364)
- 342c7da4bd channel: use os_write() instead of fwrite() for stderr (#26689)
- cd6458123f charset: fix wrong display of 0xffff (#24158)
- 603f3b36a4 checkhealth: error in node.js check #28348
- b0978fca6b checkhealth: fix crash due to incorrect argument type
- 7f94a032e1 checkhealth: shell_error and cpanm module
- bfdec5b0e7 clang: null pointer dereference in parse_msgpack #25389
- 1027ccac6d clangd: check size of array before applying qsort on it
- cdd8017469 clangd: set block pointer to null in case map is empty
- 6851b265ba clipboard: don't pass --foreground to wl-copy (#25481)
- c3de6524a5 clipboard: ignore exit caused by signal #23378
- 3128cff6b1 clipboard: increase OSC 52 wait timeout (#25936)
- 46ceefb52b clipboard: make getreg() accurate for clipboard registers (#26740)
- d2983dcdb1 clipboard: make osc52 work with PUC Lua (#26014)
- e51e524175 cmake: restore previously undocumented workround, now documented
- 3688735c2b cmdline: don't redraw 'tabline' in Ex mode (#24123)
- c72d877c33 cmdline: wrong 'incsearch' highlighting after :redraw (#27947)
- bc67bbe446 codelens: add buffer and line checks before displaying codelens (#23887)
- 2b1a6e7597 colorscheme: add missing LSP groups
- 0c850add3e colorscheme: default statusline groups usability #26921
- 8b23653695 colorscheme: link LSP semantic tokens to treesitter groups
- 62e0e0349c colorscheme: try .lua files in 'rtp' before .vim files in 'pp' (#23727)
- eca72def1f colorscheme: typo
- d4bd6b1eaa colorscheme: use explicit normal foreground in syntax groups
- 3c724fe1f3 column: 'statuscolumn' not drawn after virt_lines with "n" in 'cpo' (#22967)
- cdc028e97d column: add truncated width during estimation for 'statuscolumn'
- e89071522c column: always set b_signcols.max
- c126a3756a column: apply numhl signs when 'signcolumn' is "no" (#26167)
- 2ded2e75f4 column: avoid exceeding configured 'signcolumn' width
- b50fdcba4a column: clear "b_signcols" before moving saved marks
- 13d50c3b13 column: clear "b_signcols" when marktree is cleared
- ec74538044 column: correct width after truncated 'statuscolumn' error (#26737)
- 2bdef6dd2a column: don't overflow sign column with extmark signs (#23854)
- bab4bcdefb column: don't reset 'statuscolumn' width after it has been drawn
- c509f4907b column: fill 'statuscolumn' clickdefs with evaluated width (#26891)
- 25e62697c3 column: fix wrong cursor with 'statuscolumn' and cpo+=n (#24268)
- dbf6be296d column: full redraw with 'stc, 'rnu' and inserted lines (#27712)
- 7d0a23973b column: handle unprintable chars in 'statuscolumn' (#24198)
- 0db6946b39 column: handle w_redr_statuscol at end filler lines (#27365)
- 97122eaa1c column: ignore empty signcols range (#28177)
- 967c7abde3 column: keep track of number of lines with number of signs
- f871fee8b6 column: pass kFalse when initializing "b_signcols.count"
- 44d4f03573 column: rebuild status column when sign column is invalid
- c6864b0d14 column: redraw 'statuscolumn' on wrapped lines with 'relativenumber'
- 35cec0de4a column: redraw and update signcols for paired extmark
- d88814ef68 column: remove sign from line it was previously on with undo
- df399ea0d2 column: reset decor state before starting from top
- 5a4e0b837f column: use a single path for sign sorting (#27431)
- a878e02d5d column: use maxwidth to allocate/fill 'statuscolumn' click defs #24190
- 783b0aba41 completion: check that healthcheck name is string (#28458)
- fbeef0d4ef completion: don't add backslashes to runtime pattern (#24296)
- cdc8bacc79 completion: filter results with complete+=f (#26029)
- af8500af64 completion: improve popup window position (#26739)
- d1b2a5cf5f completion: make sure the buffer name is valid (#25975)
- e9b9a86cd5 context: don't crash on invalid arg to nvim_get_context (#25977)
- fdaf6bc557 context: don't leak memory on multiple invalid objects (#25979)
- 55be4a4e26 coverity: dead code #25562
- 6d698c86d0 coverity: unhandled retval for marktree_itr_get_overlap() #26518
- 6f49ed58c3 coverity/348240: memory leak in put_view()
- 9d48266bed coverity/471380: null dereference in get_local_additions()
- ae48d965d7 coverity/477623,477624: guard null pointer dereference in kv_concat_len (#27022)
- 2b0acacb3c decor: allow adding providers during redraw
- 5ca330859c decor: check decor kind before accessing union field (#27205)
- 60d320dea3 decoration_provider: don't leak memory on error (#24410)
- 65738202f8 decorations: better approximation of botline #24794
- 2accf24805 decorations: crash with revised mark with changed decoration flags
- a0e9ef09d7 decorations: do not apply sign highlight id as range attr id
- fba17d5b88 decorations: fix imbalanced sign count
- 444f37fe51 decorations: incompletely displayed line should also get decorations
- dc48a98f9a decorations: validate botline for on_win
- 328a237351 defaults: auto-close terminal for &shell with args (#28276)
- 5aa1ba3efe defaults: background detection in tmux (#26557)
- 5e98439f6d defaults: diagnostic mappings descriptions #28646
- ccb5a76e5a defaults: don't use nvim_feedkeys in default mappings (#24520)
- 85cb0b0ddc defaults: make terminal autoclose not block other events (#27581)
- aa1d0ac095 defaults: only repeat macro for each selected line if linewise (#28289)
- eef2aedff6 defaults: remove tmux background detection passthrough (#27571)
- 5b45efbee6 defaults: set 'fsync' #26034
- 8df3742378 defaults: use augroup for default autocommands (#26933)
- a8e4ee2f2b defaults: validate 'channel' before responding to OSC request (#27594)
- 6318edadc3 defaults: visual hash (#) on text with "?"
- abd380e28d defaults: visual mode star (*,#) is fragile
- b9a0e762f1 defaults: visual star (*) on text with "?"
- 9b4b23493d defaults: wait until VimEnter to set background (#26284)
- 72e3d8c3f9 deps: bump luv to 1.48.0-2
- 87db6d894a deps: make sure --force-config takes effect
- 7aad4643f9 deps: remove stray conflict marker
- 8a6716682e deps: restore functionality of USE_EXISTING_SRC_DIR
- d4dc884012 deps: restore functionality of USE_EXISTING_SRC_DIR
- d272143318 diagnostic: always return copies of diagnostic items (#25010)
- 29d5ff6ac4 diagnostic: check for sign namespace instead of sign group
- 3d8f0cb695 diagnostic: check if delete failed in `qf_fill_buffer()` (#25932)
- 89ffdebd20 diagnostic: fix typing on field |diagnostic-severity|
- 83635e4e3d diagnostic: get border from config (#28531)
- 96f59e1b99 diagnostic: invalid col number compare in next_diagnostic (#28397)
- ad76b050eb diagnostic: open_float on multi-line diagnostics #28301
- 37011bc45e diagnostic: rename buffer → bufnr in type annotation (#23042)
- 50284d07b6 diagnostic: typing
- a4fc3bb0e6 diagnostic: vim.diagnostic.get(…,{lnum=…}) on multi-line diagnostic #28273
- add1b10b79 diagnostic: virtual_text prefix function should have index and total (#25801)
- 35f475d0a5 diagnostics: if buffer not loaded, skip handlers that set extmark (#25628)
- 5a25dcc5a4 diff: filler lines for hunks bigger than linematch limit (#24676)
- 2f9ee9b6cf doc: improve doc generation of types using lpeg
- c4417ae70c doc: prevent doxygen confusion
- 67f5332344 docs: clean up non-docstring comments for vimdoc gen
- ae7020c667 docs: fix TSNode incorrect signatures
- ab65a98adb docs: ignore_invalid #24174
- f40df63bdc docs: make lines not overflow in vim docs
- 0a90e4b05a docs: match DocSearch style with site theme
- 0d149bb186 docs: the runtimepath is not the runtime path
- 957d05d16b docs: too much whitespace around <pre> blocks #24151
- d931b829e9 docs: vimdoc syntax errors
- 036da0d079 docs: vimdoc syntax errors
- 17c59e417f docs: vimdoc syntax errors
- 34b57508a7 drawline: check filler_todo in place of removed draw_state (#27889)
- 455bca1ba8 drawline: combine extmark highligh with area hl correctly
- 3299797150 drawline: consider position in linebuf for foldcolumn (#26803)
- 889f81c65f drawline: don't invoke on_line for filler line (#28219)
- 2b9d3869f8 drawline: don't use temporary "v" variable when not needed (#26777)
- 06694203e5 drawline: fix missing Visual hl on double-width fold char (#24308)
- d5488633f6 drawline: initialize linebuf_attr to 0 instead of -1 (#27840)
- e9280a68f7 drawline: initialize variable
- 2819718873 drawline: initialize variable
- 36941942d6 drawline: inline virt_text hl_mode inside syntax/extmark hl (#24273)
- 37b73cf14b drawline: make cursorlineopt=screenline work with resized grid
- be1d09c427 drawline: missing NUL termination when drawing TAB (#27307)
- 5b31447811 drawline: update prev_ptr after getting syntax attrs (#27072)
- 14839c5d18 edit: backspace adds extra spaces for inline virtual text (#28005)
- 267e90f31d edit: don't go to Terminal mode when stopping Insert mode (#27033)
- b2e8c0df20 edit: fix K_EVENT interfering with 'digraph' (#24258)
- 143a178332 editorconfig: add missing root validation (#23462)
- cbbda3bcd7 editorconfig: check that buffer is valid (#23922)
- abb8c2c453 editorconfig: do not set 'endofline'
- df2f5e3912 editorconfig: highlight properties with dashes (#24407)
- dc45fb4655 editorconfig: only warn once on errors
- cdbc3e3f3e editorconfig: syntax error regression
- bf0c69e504 eval: correct failure return value for readfile/blob (#27722)
- 5b312cd5f6 eval: make has('pythonx') work properly (#27739)
- 0e4086b741 eval: prevent double-free in garbage collection (#22990)
- 12d123959f eval: properly support checking v:lua function in exists() (#27124)
- b8c34efe33 eval: skip over v:lua properly (#27517)
- ad2fad9a3b event-loop: flush UI when no input is available (#25728)
- 6725565258 event-loop: process input before events (#27358)
- 58a1ef8e6a events: avoid unnecessary CursorMoved (#24675)
- bf9e92c81c events: check for WinResized/WinScrolled in terminal mode (#27226)
- dd24ea8195 events: don't expand non-file as file name
- 774a32e5fe events: null dereference in autocmd functions
- a8cfdf43bc events: trigger VimResume on next UI request (#24426)
- a114a21eff ex_getln: initialize pointer with NULL
- 9e7c4fe579 exception: remember whether message is multiline (#25351)
- 4a098b97e5 excmd: append original command to error message
- 75d9c413d4 excmd: make :def unknown rather than unimplemented (#23150)
- f1dd75c2af exitfree: don't use ex commands to close windows in free_all_mem()
- 79a558277b extmark: fix crash when stepping out from internal node
- a78fd18ed9 extmark: fix cursor position with both left and right gravity inline text
- 320e9c1c21 extmark: only invalidate unpaired marks on deleted rows
- 8e97edb93f extmark: restore extmarks when completing original text
- 2d33a766a1 extmarks: `U` changed_bytes after extmark_splice (#26501)
- 23c21e7630 extmarks: account for rightleft when drawing virt text (#25262)
- d54156ed08 extmarks: blending space shouldn't overwrite wide char (#26960)
- 54225bdb02 extmarks: crash with sign after many marks
- 65b1fd00a7 extmarks: do not remove decor from invalid old marks
- 437d35dbf7 extmarks: do not remove invalid marks from decor upon deletion
- a05bbc60ea extmarks: don't position overlay virt_text halfway a char (#24027)
- 4dd43e31db extmarks: don't show virt lines for end mark (#23792)
- dfa8b582a6 extmarks: draw TAB in virt_text properly with 'rl' (#25381)
- a6e4793baf extmarks: draw virt_text below diff filler lines properly (#25170)
- 958cc22836 extmarks: empty inline virt_text interfering with DiffText (#24101)
- 0534ad8ca5 extmarks: empty inline virt_text interfering with Visual highlight
- 31a51acdc3 extmarks: fix heap buffer overflow caused by inline virtual text (#23851)
- 9c41a81dec extmarks: fix virt_text_hide off-by-one hiding (#23795)
- a6dd67f5b6 extmarks: fix virt_text_hide with 'nowrap' and multibyte (#23757)
- 818d7f6daf extmarks: fix win_col virt_text drawn on wrong screen line (#25264)
- c4df2f08b6 extmarks: fix wrong highlight after "combine" virt_text (#24281)
- b65cd7ff1a extmarks: fix wrong virt_text position after wrapped TAB (#25168)
- 4c7cec4e29 extmarks: handle inline virt_text with empty chunk (#24005)
- ee3d4f6b90 extmarks: handle overwriting right half of wide char (#26951)
- f4f1ce1d16 extmarks: hide inline virt_text properly with 'smoothscroll' (#24106)
- 34a786bc49 extmarks: inline virt_text support multiple hl groups (#25303)
- 5a6c7c805b extmarks: make empty "conceal" respect &conceallevel = 1 (#24785)
- 510e1f131b extmarks: make right_align and win_col work on wrapped line (#23759)
- 215244f749 extmarks: missing "spell" and "conceal" in details (#27116)
- 35e50d79c6 extmarks: overlay virt_text position after 'showbreak' (#25175)
- a0790558c3 extmarks: priority order of inline and non-inline virt_text (#27532)
- b52bd8a2de extmarks: properly handle virt_text on next screen line (#25166)
- a376d979bd extmarks: redraw line on adding/removing conceal (#27463)
- 2d9e063a63 extmarks: redraw pre-undo position (#27437)
- 2137edbd4f extmarks: redraw properly with scoped inline virt_text (#27569)
- 1cc358aed6 extmarks: restore old position before revalidating
- 0818d65528 extmarks: skip virt_text if it is out of window (#25658)
- 19d63563e1 extmarks: splice earlier when opening new line (#28108)
- 362df0f793 extmarks: wrong display when changing text with virt_lines (#24879)
- d5a85d737a f_wait: flush UI before blocking (#25962)
- 81f67b79e8 file_search: path with spaces in finddir() and findfile() (#25493)
- a69c720639 fileio: fix off-by-one in rename_with_tmp (#27780)
- c6c21db82b filetype: add typing and dry (#24573)
- 020d1f626a filetype: call on_detect before setting buffer filetype
- fdf5013e21 filetype: correctly detect bash-fc-{id} files as "sh"
- d6f406db45 filetype: don't use fnamemodify() with :e for extension (#27976)
- 670c7609c8 filetype: make sure buffer is valid before call nvim_buf_call (#24922)
- af38b46a25 filetype: return on_detect function when matching by file contents
- 2955c921ce filetype: use unexpanded file name (#27931)
- e32af31ee8 flake: clang-tools moved to nativeBuildInputs (#26955)
- fd08fd3de3 float: add fixd option
- 884470124d float: allow floating window in cmdline area
- 9ecb43b637 float: apply 'winblend' to title/footer highlight (#25999)
- 898371fc9f float: don't relative flaot win itself
- fcdfbb4303 float: fix some other crashes with :unhide or :all (#25328)
- 3ea124a8d9 float: improve error message when reconfig failed (#25076)
- c5abf487f1 float: make "fixed" work with relative=win (#25243)
- 03e8b5fc91 float: make bufpos work properly with resized parent grid
- 437ed3cee2 float: trigger winnew event when float window create
- f5953edbac float: update position of anchored windows first (#25133)
- 9de157bce4 float: win_get_bordertext_col returning negative column number (#25752)
- 5f18dd3013 float: wrong position when bufpos is set
- 0e01e81552 folds: allow overlay virtual text on folded line (#23892)
- ee986ee044 folds: combined Folded and Visual highlights (#23752)
- ded01a819a folds: don't show search or match highlighting on fold (#24084)
- 811140e276 folds: fix missing virt_lines above when fold is hidden (#24274)
- 678548a2b4 folds: show Folded highlight in Visual selection (#23741)
- 58f9486144 folds: update folds in Insert mode with fdm=indent (#24402)
- 38e38d1b40 fs: allow backslash characters in unix paths
- 8a7e3353eb fs: make `normalize()` work with '/' path (#24047)
- ae5095cac9 fs: use generics for better typing
- e4da418ba8 fs.lua: normalize slash truncation (#23753)
- 06fcf71bd0 fswatch: --latency is locale dependent
- 502a7a0558 ftplugin: respect runtimepath ordering
- 03a2c5b772 ftplugin: source Lua files after Vimscript files per directory (#23801)
- be5cf33836 gen_help_html: type warnings, spell_ignore_files #27254
- 6c35fb421e gen_lsp.lua: improve type name, and fix wrong type inheritance
- 214b125132 gen_lsp.lua: no notifications in lsp.Methods #24530
- 765729a145 gen_vimdoc: INCLUDE_DEPRECATED not generating docs for deprecateds
- ccf328172b gen_vimfn_types: don't include tag before signature's line (#24492)
- 86c9d8b53c gen_vimvim: correctly add aliases to vimAutoEvent (#23429)
- 240c41e1af genvimvim: add special abbreviations of :delete (#23172)
- 51ea753747 genvimvim: generate prefixed boolean options properly (#27487)
- 9f32deba56 grid: add start column when getting char on line (#25627)
- 4ed1c2a8af grid: don't draw beyond max column (#26172)
- 9c202b9392 grid: handle clearing half a double-width char (#27023)
- 6a486c44e6 gx: move to to _init_default_mappings #24420
- 67b2ed1004 gx: visual selection, expand env vars
- e39b6d0c52 health: "attempt to concatenate nil"
- 7ffe450173 health: check for _host_prog variables properly (#23014)
- 50cd5ed360 health: check more "old" files
- f6dcc464f2 health: check unmatching python_glob as empty table (#28215)
- 6818ba271c health: clients may not support watchfiles #28710
- 03a021f378 health: combine python and virtualenv healthchecks (#23004)
- c67efe3a9c health: correctly expand and resolve PYENV_ROOT (#26953)
- 88eb0ad149 health: fix tmux RGB capability detection (#26886)
- cde4892b49 health: fix typo in function name
- 63a17322dd health: improve python executable check error handling (#26954)
- ba88fd886a health: malformed call to warn() #26217
- 8c6f97bef8 health: properly use the value of $PYENV_VERSION (#23109)
- c8ebb04e92 health: replace healthFoo with DiagnosticFoo (#23475)
- 843c1bed95 health: stop job properly on timeout (#23877)
- 96d0c709b6 healthcheck: expand vimrc variable (#28379)
- 4229bbe514 helptags: make multibyte help tags work properly (#23975)
- 7b6d041bae heredoc: allow missing end marker for scripts
- a2f17e97ec highlight: add `FloatFooter` to 'highlight_defs.h' (#25577)
- 837f268093 highlight: add `Nvim{Light,Dark}Gray{1,2,3,4}` colors
- 8afb3a49c0 highlight: add create param in nvim_get_hl
- f8ea49cfe1 highlight: add force in nvim_set_hl
- 4ce0ada0d4 highlight: add missing g: prefix for colors_name (#22952)
- 03ca36d1f8 highlight: apply 'winblend' to NormalNC (#23555)
- 6c3e170e56 highlight: apply 'winblend' to float border (#25981)
- d4872377fe highlight: attr set all when normal attr changed
- dcaf207336 highlight: combine ColorColumn with low-priority CursorLine (#23017)
- 66925f14de highlight: consistently spell "Goldenrod"
- 5183651773 highlight: correct hi command output
- ca7dd33fa7 highlight: don't show CursorColumn on current line (#27848)
- 59289fb987 highlight: make CurSearch work properly with 'winhl' (#24448)
- b11a8c1b5d highlight: remove unnecessary assignment to char_attr for 'spell' (#23713)
- 9a2c98087b highlight: update `IncSearch` to link to `CurSearch`
- ab92575753 highlight: winhl receive wrong argument
- b60a2ab4cb inccommand: block errors when parsing command line again (#24374)
- bc5b0da84e inccommand: don't crash with "split" and 'n' flag
- 382ea4d402 inccommand: don't preview in Ex mode (#26587)
- c1c2a1b5dd inccommand: don't save information of a buffer twice (#24501)
- ef44e59729 inccommand: don't set an invalid 'undolevels' value (#24575)
- ba9f86a9ce inccommand: improve preview buffer number handling (#27087)
- 643bea31b8 inccommand: restrict cmdpreview undo calls (#24289)
- 1dba570e63 inccommand: save and restore '[ and '] marks (#26442)
- 35ffe58ea4 inccommand: update topline after moving cursor (#27341)
- a14c780918 input: set termkey buffer size to read stream capacity
- b61575ba70 intro: clear intro if new buffer is shown in focused float
- 9530a23016 intro: link showing intro to state at start
- 0570a19c8a intro: make intro explicitly stateful
- d1a30221fc intro: redrawing intro exposing pseudo-randomness
- 21360523cd intro: still show intro message with floating window
- 6b96122453 iter: add tag to packed table
- 2ee8ace217 iter: make pipeline termination conditions consistent (#24614)
- 9489406879 iter: remove special case totable for map-like tables
- 57ccd82417 job-control: fix use after free (#25223)
- 1c71c32b29 job-control: make jobwait() flush UI after hiding cursor (#25927)
- e057b38e70 json: allow objects with empty keys #25564
- af6537bc66 jumplist: Ctrl+o, Ctrl+i weird behavior when deleting buffers #25461
- 017ff93b02 keycodes: recognize <t_xx> as a key (#24700)
- 6709f7f8f1 keycodes: simplify S- properly when D- is present (#27316)
- 4447cefa48 l10n: update Japanese translations (#27856)
- 7d17ab5b6f l10n: update Ukrainian translations (#26819)
- 908843df61 languagetree: apply `resolve_lang` to `metadata['injection.language']`
- e353c869ce languagetree: don't treat unparsed nodes as occupying full range
- 6b5f44817e languagetree: remove double recursion in LanguageTree:parse
- f5530bf566 linematch: initialize array
- 766f4978d6 lint: lint warnings #24226
- 5465adcbab lint: use tbl_contains
- 0804034c07 loader: cache path ambiguity #24491
- 89135cff03 loader: remove cyclic dependency on vim.fs (when --luamod-dev)
- 66c66d8db8 loader: reset hashes when running the loader
- ec80e4cb4d log: increase size of buffer for nvim instance name
- 4d0f4c3de9 lsp: E403 if doc contains multiple codeblocks #24458
- 20c331915f lsp: SignatureHelp docstring is not escaped #16702
- 01691c5447 lsp: abort callHierarchy on no result (#28102)
- 9abced6ad9 lsp: account for border height in max floating popup height (#25539)
- 3e016fa8d4 lsp: actually send diagnostic-tags back to the server
- 37d8e50459 lsp: add "silent" option to vim.lsp.start (#28478)
- 2e1f5055ac lsp: add assertion for explicit bufnr in apply_text_edits (#27614)
- 542c910a1d lsp: add missing LSP semantic token highlight links
- be5e361154 lsp: add param assert in client_is_stopped (#23857)
- ac0e8323dc lsp: add parentheses to generated union array types (#27560)
- 0fcbda5987 lsp: add snippet regression test (#27618)
- e42fdaad21 lsp: add spacing for inlay hints separately #24079
- 48bcc7b971 lsp: advertise workspace.didChangeConfiguration capability (#26028)
- c07dceba33 lsp: allow Lua pattern chars in code action filter (#24041)
- 3bf887f6e0 lsp: always return boolean in lsp.buf_client_attach (#24077)
- 966eb8e0b3 lsp: announce publishDiagnostics.dataSupport (#24442)
- 39fc340276 lsp: avoid assertion when `client_hints` do not exist (#28461)
- 47dbda97d2 lsp: buffer messages until connected to server (#28507)
- adbe7f3683 lsp: call `on_list()` even for single location (#25830)
- 15983cf2c6 lsp: cancel session when leaving snippet region (#25762)
- 816b56f878 lsp: cancel watchers when closing a client
- 9b8a075539 lsp: change `silent` in lsp.start.Opts to optional (#28524)
- d3e0352574 lsp: check if inlay hints are enabled for a buffer before disabling (#24074)
- fa9a85ae46 lsp: clean up duplicate and unused meta type annotations
- 8bd6f7c20b lsp: clear codelens on LspDetach (#24903)
- 97c0a52416 lsp: correct deprecation message #28403
- aa62898ae3 lsp: correct the error message's cmd on spawning (#27632)
- 77a9f3395b lsp: create codelens request parameters for each buffer (#27699)
- 9281edb334 lsp: create per client params in lsp.buf.code_action
- 39cc38a87b lsp: defer writing error msgs (#27688)
- 1b679ac192 lsp: define LspInlayHint highlight group #24073
- dc8c086c7e lsp: directly rename the existing buffers when renaming (#27690)
- c1a95d9653 lsp: disable didChangeWatchedFiles on Linux
- 2fde6295df lsp: display initialization errors (#25409)
- 94127cb5df lsp: do not add extra indentation
- cc87dda31a lsp: do not assume client capability exists in watchfiles check (#24550)
- 0fe0cf5ada lsp: do not cancel snippet when selecting placeholder (#25835)
- 073035a030 lsp: don't register didChangeWatchedFiles when capability not set (#23689)
- 5eee633c97 lsp: don't start additional client if attach failed (#28744)
- 21fa19f3e8 lsp: don't use hl_mode = combine for inlay hints #24276
- 96b94f8d77 lsp: duplicate on_detach, on_reload callbacks #24067
- b95b6ed975 lsp: empty commands should not be considered executable (#28216)
- c3c673cdec lsp: enable() does not activate inlay hints on open buffers #28629
- b2c26a875b lsp: ensure buffer is not attached more than once
- fa0a25dcb3 lsp: error in reset_timer on second detach #24117
- 72e64a1afe lsp: extra "." when completing with tsserver #24646
- 031088fc0a lsp: filetype matching to documentSelector in dynamic capabilities (#25425)
- d191bdf9d5 lsp: fix attempt to call non existent function (#24212)
- dd3fa64573 lsp: fix dynamic registration of code actions (#23826)
- ce4ea638c7 lsp: fix incorrect typing and doc for `vim.lsp.rpc`
- f487e5af01 lsp: fix infinite loop on vim.lsp.tagfunc
- 74bd4aba57 lsp: fix multi client handling workspace_folder methods (#18839)
- 5e5f5174e3 lsp: fix off-by-one error for omnifunc word boundary
- ba6761eafe lsp: fix omnicomplete in middle of the line (#25787)
- 075a72d5ff lsp: fix relative patterns for `workspace/didChangeWatchedFiles` (#23548)
- 840e1864c2 lsp: handle NUL bytes in popup text (#25612)
- 345bd91db2 lsp: handle absence of a trailing newline #25194
- 0e9a33572d lsp: handle adjacent snippet tabstops
- 853f647da6 lsp: handle reverse lookup in capabilities
- 91f67fabe6 lsp: handle stale bufnr on LspRequest autocmd trigger (#24013)
- 849d82b80b lsp: handle stale bufnr on LspRequest autocmd trigger (#27981)
- 2eecb1b85d lsp: highlight active parameter in signature help #25663
- e55e80d51c lsp: inlay hints: "Failed to delete autocmd" when closing buffer #24469
- 7968322e7a lsp: inlay_hint nil reference error #24202
- ba8f19ebb6 lsp: lint warnings, default offset_encoding #24046
- 3304449946 lsp: log unknown diagnostic tags instead of showing a warning (#25705)
- 251ca45ac9 lsp: markdown code fence should allow space before info string #24364
- add7e106d5 lsp: noisy warning about offset_encodings #24441
- c235959fd9 lsp: only disable inlay hints / diagnostics if no other clients are connected (#24535)
- 1dacf2ecee lsp: prevent code-lens refresh from becoming a permanent no-op (#28228)
- 597ecf7516 lsp: re-add client.commands and mark private
- 94a904b453 lsp: reapplying already-applied hints #24114
- 4ecc71f6fc lsp: reduce diagnostics and add more types (#23948)
- bc7f86209d lsp: redundant vim.snippet.jumpable #28560
- ee156ca60e lsp: refactor escaping snippet text (#25611)
- 2ecba65b4b lsp: remove unknown LSP protocol property (#24345)
- 7311958e12 lsp: remove unnecessary file load/write when renaming (#27621)
- e14e750998 lsp: rename LspProgress data.result => data.params #28632
- f0e61e6d92 lsp: rename fails on missing parent directory #27291
- b413f5d048 lsp: rename undofile when renaming (#27684)
- d09957e0a0 lsp: rename: load and list new buffer if attached to window (#27408)
- 7668f89d5b lsp: replace @private with @nodoc for public client functions (#24415)
- 52823616bc lsp: replace bug-prone ternary operation #28627
- 5282d3299c lsp: restore marks after apply_text_edits() #14630
- cf5f1492d7 lsp: revert change to buf.clear_references() #24238
- 917172dd96 lsp: semantic token defer loading
- 3be2536ca0 lsp: send back diagnostic tags to the server
- a37d568082 lsp: send empty "added" list when removing workspace folder #24440
- 3c6d971e54 lsp: set extra info only when it has a value (#23868)
- 5785c32f11 lsp: set fallback client name properly
- 370232dbef lsp: track snippet deletion
- ca26ec3438 lsp: use only utf-16 in default client positionEncodings (#23903)
- b302da9ad2 lsp: use percentage format on lsp.status (#23971)
- 2c8f36a3b0 lsp: use plain loop for non-list-like table of protocol values
- 8addd27504 lsp: when renaming directory, check path prefix of buffer names (#27603)
- 597355deae lsp: wrong iterator in registerCapability handler (#24971)
- b2d471ab33 lua: allow nil values in serialized Lua arrays (#26329)
- 68f12e7fcb lua: annotate that TSNode functions can return nil (#24621)
- 4ffc20c951 lua: avoid internal error when :luado deletes lines (#27262)
- 3198038224 lua: correct return value for on_key with no arguments (#25911)
- 84bbe4b0ca lua: disallow vim.wait() in fast contexts
- 22eb2ba183 lua: do not schedule events if Nvim is exiting
- 7d279a09e0 lua: handle array with holes in luaeval() (#26630)
- c43c745a14 lua: improve annotations for stricter luals diagnostics (#24609)
- 2f779b94e7 lua: inspect_pos respect bufnr when get syntax info (#23098)
- e2e63bd045 lua: make highlight.on_yank use win-local highlight (#27349)
- b40170f7a3 lua: memory leak when using invalid syntax with exists() (#26530)
- 4ab9c5fa46 lua: not using global value in vim.opt_global (#25196)
- 20ec4c776a lua: only disable vim.schedule() when closing main loop (#26090)
- f150b62423 lua: only free luarefs when returning from API (#28373)
- 0190771713 lua: remove uri fragment from file paths (#27647)
- 5aa14e1231 lua: return after assert returns assert message (#27064)
- 5331d5772f lua: show error message when failing to set variable (#25321)
- 1294e221a2 lua: vim.fn.has('nvim-0.10') in fast context, used by vim.deprecate
- 37c58226a8 lua: vim.fs typing (#24608)
- 5db076c7cc lua: vim.region on linewise selection #25467
- 622b1ae38a lua: vim.split may trim inner empty items
- a7df0415ab lua2dox: filter out the entire `---@alias` block
- 32e69bd397 luarc.json: ignore test directory to save memory
- 6f936c9d85 man: make :Man with a range work (#25922)
- 59aadf33ef man: pass modifiers also to :tag (#27878)
- a9b4dc9614 man: set the nested flag for the BufReadCmd autocommand (#26285)
- c8d1d8b254 man.lua: don't continue on command error (#23009)
- a4c4b39d55 man.lua: hardwrapped manpage is not resized #25646
- 209ed16f57 man.lua: return support of all sections
- 3a7c30dc93 man.vim: q quits after jump to different tag in MANPAGER modified (#28495)
- 3c667d3e0f mappings: fix mapset() not replacing map with backslash (#26719)
- 0451391ec5 mark: properly init mark views (#22996)
- d432bba4e4 marks: handle switching buffer properly (#25763)
- 62306a29ad marktree: correct qsort usage
- 585549625d marktree: off-by-one error in `marktree_move`
- 34be915f6b marktree: preserve ordering in `marktree_move`
- b97d5038f1 marktree: some marks counted twice when checking for overlap
- ad5a155b1f mbyte: fix bugs in utf_cp_*_off() functions
- b028233991 memline: more curbuf stuff
- 91ef26dece messages: :map output with ext_messages (#26126)
- eabf9de1dc messages: allow more prompt in headless mode with UI (#27905)
- 60fb8a6a8b messages: avoid crash with :intro and ch=0 (#28343)
- 61a0aa6c51 messages: avoid passing negative length to strnlen() (#28753)
- ca258db156 messages: clear new lines when increasing 'cmdheight' (#27421)
- c9f47fca8b messages: ensure msg_grid is at top at more prompt (#23584)
- 2f17ef1fc4 messages: use "Vimscript" instead of "VimL" #24111
- 55dbf5c379 messages: validate msg_grid before using msg_grid_pos (#26189)
- 4db77017fb meta: add nil return types to lpeg functions
- 5198a2555d meta: cleanup lpeg operators
- dae6770b76 meta: include vim.json
- d31f7648ec mkspell: prevent Unicode character overflow (#23760)
- a8a93e517f mouse: avoid dragging after click label popupmenu callback (#26187)
- 6a2a37b1e1 mouse: avoid dragging when clicking next to popupmenu (#26201)
- 091eb4c8c7 mouse: click after eol with conceal and virtual text (#27897)
- 2b475cb5cc mouse: click on 'statuscolumn' with 'rightleft' (#25090)
- e25cf47ad3 mouse: click on empty line with 'foldcolumn'
- 84a4319545 mouse: cmdline click registered as statuscolumn (#23163)
- bf52fb7193 mouse: copy the line before syntax matching (#24320)
- 5fb4c397a1 mouse: drag vsep of window with 'statuscolumn' (#24462)
- dc394b9641 mouse: fix popup menu position check with winbar (#23456)
- 7c1921e9d6 mouse: fix popup_setpos position check with ext_multigrid (#23436)
- a3fba5cafc mouse: handle folded lines with virt_lines attached to line above (#23912)
- 64aa0f7d0b move: check for filler lines properly (#28307)
- 366d0c7887 move: check the correct buffer (#25698)
- 780509aedf move: fix using the wrong window (#28312)
- 60d1e3e471 msgpack: store grid line event as a value
- c52dfb6e84 normal: don't check conceal when pressing 'r' (#27892)
- 088cdf69e3 normal: make "g$" work properly with resized grid
- a1ded1b113 oldtest: always use a 64-bit int for swapfile block number
- 92c59c39c3 ops.c: remove duplicate u_save_cursor()
- 9d01385c6c options: `'modified'` showing incorrect value for scratch buffers
- c3e176f6e2 options: correct condition for calling did_set_option() (#25026)
- 9af03bcd47 options: do not change inccommand during preview (#25462)
- 796df966f3 options: don't update curswant for 'winhl' or 'winbl' (#27515)
- d956bc6379 options: setting 'scroll' with resized grid (#26628)
- c8a27bae3f options: use a union for def_val (#27169)
- 804c828e68 optionstr.c: incorrect use of curbuf/curwin
- a9df0c5ce6 osc52: do not use 'vim.iter' (#27218)
- 5d75d9aef2 osc52: enable OSC 52 by default in tmux sessions (#26072)
- 86c2213b5e osc52: use `p` for primary selection instead of `s` (#26076)
- 1045659097 osc52: use nvim_chan_send() to stderr for copying (#26690)
- e3bd04f2af pager: handle consecutive newlines properly (#27913)
- 1e7e9ee91f path: accept special characters on Windows (#25424)
- f064e72b9b path: check return value of append_path() (#28309)
- f5eabaa940 path: restore space separation in 'path' (#25571)
- 908f247c22 plines: count 'showbreak' for virtual text at eol
- a0cbf1d8d5 plines: cursor position with 'showbreak' and resized grid (#28067)
- 317038e7cb plines: don't return very large height on very long line (#24260)
- 7955c90621 plines: folded lines with virt_lines attached to line above
- 35c3275b48 plines: handle inline virtual text after last char (#24241)
- cbadb39d16 plines.c: initialize cts_max_head_vcol (#24855)
- fc14928719 printf: make positional %zd and %zu work (#24722)
- d0b3c87219 process: avoid potential data race on exit (#27769)
- 3e569d440b process: close handles and timer in pty_process_close() (#27760)
- 268066e014 process: start pty process eof timer on main thread (#27625)
- 49983387ff prompt: emit change event for prompt newline (#28260)
- 7bd6bd1ef7 provider: cannot detect python3.12 #25316
- 61ecb3e16c provider/pythonx: import the correct module (#25342)
- 540941ef83 pum: don't position too far with resized parent grid (#23442)
- f186224dfc pum: fix missing rightmost column with 'rightleft' (#23445)
- 8bc973c6f5 pum: fix missing scrollbar with 'rightleft' (#23448)
- a7550a20e0 pum: handle right-click menu repositioning with multigrid (#26975)
- fbaa278773 pum: make :popup position correctly with float border
- a3dfe1bc89 pum: position properly with ext_multigrid (#23336)
- c1331a65dd pum: show right-click menu above cmdline area (#23298)
- dd0e77d48a query_error: multiline bug
- 5ac2e47acc redo: make redo of Lua mappings in op-pending mode work (#23566)
- 60f69014a8 redraw: multibyte characters are wrapped at the end of a line (#23696)
- cb34d0ddd0 redraw: overwrite double-width char with virt_text properly (#23708)
- d184933cdc redraw: update Visual selection properly with splits (#27343)
- 54044e6dce release.sh: ze version is too big
- cce9460524 remote: make --remote-expr print to stdout (#23980)
- bde59e8147 remote: restore previous --remote-expr output formatting (#23988)
- 468292dcb7 rpc: "grid_line" event parsing crashes (#25581)
- 4d4092ac9e rpc: assertion failure due to invalid msgpack input
- 8921d56053 rpc: do not crash when no input is consumed
- c422722b2e rpc: fix hang with channel closed while waiting for response
- adb2258345 rplugin: dont create data dir if it's a broken symlink #25726
- 65dd3c1180 ruler: show ruler of curwin with no statusline in cmdline
- f5231d61a5 runtime: add commentstring for C# ftplugin (#23039)
- 3387dc4a46 runtime: add commentstring for D ftplugin (#25362)
- 615b48aca6 runtime: add more Nvim-only highlight groups to Vim syntax
- aee6f08ce1 runtime: do not allow breakcheck inside runtime path calculation
- df297e3c2b runtime: don't set gx mapping if already mapped (#24262)
- 9176b5e10a runtime: respect 'fileignorecase' when sourcing (#24344)
- dbb840da01 runtime: respect 'rtp' order for all runtime files (#24335)
- 70a0049296 runtime: source c ftplugins in correct order (#27377)
- d431a4d410 runtime: source old color scheme in bundled color schemes (#26641)
- 3ab6f60dc8 runtime: update 'vim' color scheme to use new tree-sitter groups
- 67fba9affa runtime/tutor: don't try to close fold when there is none (#24953)
- ee56daebb6 shada: update deleted marks (#24936)
- 517dfdf0fc shada: update marks when using delmarks! (#24978)
- 4d52b0cf67 showcmd: clear the rest properly (#28420)
- fcd9905291 sign: avoid deleting from sign map while looping over it (#27158)
- a84b454ebe sign: do not error when defining sign without attributes (#26106)
- a5ade3c63d snippet: correct indent with newline
- 4625394a76 snippet: do not add extra indent on newlines (#28538)
- a1bdf2852d snippet: remove misleading comment about TM_FILENAME_BASE (#26465)
- 8c044f0862 spell: always accept ':' as filename char in 'spellfile' (#27172)
- a803bff89c spell: extmark with spell=false should disable spell (#23400)
- eceb2dffce spell: splice extmarks on :spellrepall (#23929)
- aa65bd478a startup: "nvim -l foo.lua" may not set arg0 #24161
- 628f6cce80 startup: don't truncate when printing with -l (#24216)
- c0fa721ade startup: make recovery mode work without --headless (#24477)
- 8e739af064 startup: multiprocess startuptime #26790
- 8f10362cdc startup: only send one default_colors_set event during startup
- 559c4cfd52 startup: run embedded Nvim with real path (#24282)
- b21d960119 startup: set full_screen when in ex_mode
- 9637b7dae4 startup: stop TUI properly when quitting at swap dialog (#25337)
- d7359a8742 startup: trigger UIEnter for the correct channel (#25860)
- 01e273c340 statuscolumn: don't update clicks if current width is 0 (#24459)
- afd0c648a8 statuscolumn: force full redraw when signcolumn is invalid (#24859)
- dc6c11394b statuscolumn: update number hl for each screen line (#25277)
- a4b2400804 statusline: also allow right click when 'mousemodel' is "popup*" (#23258)
- 4ecf6fdfd8 statusline: bail out properly on negative row (#23535)
- 70da793c5e statusline: corrupted screen with minwid sign item in 'statuscolumn' (#23823)
- d7bb19e013 statusline: fill for double-width char after moving items (#24207)
- 54f5602038 statusline: fix uninitialized variable and possible overflow
- 9f15a18fa5 statusline: missing offset when showing 'keymap' (#27270)
- 7b973c71ea statusline: redraw when VIsual_mode changes (#23933)
- dbc0fa9bd6 stdpath: remove duplicate directories (#26653)
- 1907abb4c2 stream: do not close handle if it is already closing (#26537)
- 9dd48f7832 substitute: properly check if preview is needed (#23809)
- 9753cda591 syntax: use correct diagnostic group for checkhealth (#23538)
- 400b7842a9 termcap: escape escapes in passthrough sequence (#26301)
- e527842211 termcap: only call callback for requested capabilities (#26546)
- ffeb31c2f9 termcap: set 'nested' on TermResponse autocommand
- b7831c7f99 termcap: use tmux passthrough sequence when running in tmux (#26281)
- e6d3f87dfd termdebug: handle partial lines passed to callback (#22950)
- c413b42c45 termdebug: prompt mode breaks with &splitbelow set
- 8aad4b8425 termdebug: send SIGINT when interrupting prompt mode
- af78060b18 termdebug: trim suffixed "\r" in CommOutput
- 684e93054b terminal: assign channel to terminal earlier (#25771)
- 82b1a389ba terminal: avoid Insert mode in Terminal buffer (#25820)
- 99288ecc77 terminal: block input when there is pending TermRequest (#27589)
- f2ce31d3dc terminal: call validate_cursor() before screen update (#24425)
- e09adfdcff terminal: check if mouse on statusline/tabline/winbar/vsep (#26892)
- e115732465 terminal: check terminal size at end of screen update (#25480)
- 120c4ec855 terminal: disable reflow again
- c881092ffe terminal: don't lose focus on <MouseMove> (#25845)
- 16a416cb3c terminal: don't pass incomplete UTF-8 sequence to libvterm (#27922)
- d0d132fbd0 terminal: don't send unknown special keys to terminal (#24378)
- 74776dfb2a terminal: fix duplicate recording with mouse click (#28103)
- 21d466c1b9 terminal: forward horizontal mouse scrolling (#24552)
- d401b33314 terminal: handle horizontal scrolling in another window (#24828)
- 5e78fd7784 terminal: ignore $VIM and $VIMRUNTIME in pty jobs
- 0a7fda6fa0 terminal: include modifiers when forwarding mouse (#24549)
- d4c2fc6ff6 terminal: keep focus when scrolling number column of another window (#25848)
- 5ca6c9e046 terminal: make backslashes in 'shell' work on Windows
- aba954b662 terminal: never propagate $COLORTERM from outer env (#26440)
- b74262a336 terminal: send Shift-Home Shift-End Ctrl-Home Ctrl-End (#24418)
- 0fd8eb8aae terminal: set $COLORTERM unconditionally in :terminal (#24763)
- fa17a5ab49 terminal: use terminal buffer for TermRequest autocommand (#26974)
- 5999214c24 termkey: accept BEL (0x07) as OSC terminator
- ce2f770aaa termkey: do not sign extend mode value
- 50f5864dd2 termkey: include IO header on Windows
- 52e6059415 test: call separate_arguments() correctly to honor $BUSTED_ARGS (#26905)
- c5528e7fd8 test: clean up inline virtual text tests a little
- 380b634ac9 test: fix "indeterminism" warnings in UI tests
- f4c97da262 test: fix strings_spec.lua for AArch64
- 477458f7bf test: more tests for marktree
- d8e330bcec test: remove test/compat.lua
- a7bbda121d test: typing
- 8861ad83fd test/tui_spec: pass the expected NULL-sentinel to execl()
- f859d16aea tests: set SHELL=sh #24941
- 3d44340cea tests: use more global highlight definitions
- e9bfbe99cd textformat: remove unnecessary changed_bytes() (#26027)
- 255e547e18 timer: allow timer_info() to get info about current timer
- a8131aee9e tohtml: replace hex escape with digit escape (#27728)
- 0246f1a897 tohtml: set filetype of generated HTML to `html`
- ccc0980f86 treesitter: Use the correct replacement args for #gsub! directive (#23015)
- 71d9b7d15c treesitter: _trees may not be list-like
- a4743487b7 treesitter: `language.add` - only register parser if it exists
- 4a8bf24ac6 treesitter: adjust indentation in inspector highlights (#26302)
- ef64e225f6 treesitter: allow foldexpr without highlights (#23672)
- 6a264e0897 treesitter: allow optional directive captures (#28664)
- cf612c64b0 treesitter: allow passing lang to vim.treesitter.get_node() now correctly takes opts.lang (#26360)
- 32849d5667 treesitter: avoid # of nil in _query_linter
- 3fd7449d5a treesitter: check that buf is loaded in autocommands (#25679)
- e7f50f43c8 treesitter: clip end row early
- 6b19170d44 treesitter: correctly calculate bytes for text sources (#23655)
- bd5008de07 treesitter: correctly handle query quantifiers (#24738)
- fba18a3b62 treesitter: do not calc folds on unloaded buffers
- c30ebb17f6 treesitter: document more standard highlight groups
- 040369e1e4 treesitter: don't forcefully open folds
- 72ed99319d treesitter: don't invalidate parser when discovering injections
- 4607807f9f treesitter: don't update fold if tree is unchanged
- 26b5405d18 treesitter: enforce lowercase language names (#28546)
- 3a8265266e treesitter: escape "\" in :InspectTree #28613
- 369f58797d treesitter: escape quotes in :InspectTree view #24582
- 6e45567b49 treesitter: fix TSNode:tree() double free (#24796)
- 50a03c0e99 treesitter: fix another TSNode:tree() double free
- 7c6f9690f7 treesitter: fix indexing in foldexpr
- 01b91deec7 treesitter: fix parens stacking in inspector display (#26304)
- f40a109716 treesitter: fix trim predicate
- 1f551e068f treesitter: fixup for InspectTree
- 26cc946226 treesitter: foldexpr tweaks
- e85e7fc7bc treesitter: handle empty region when logging (#24173)
- 12faaf40f4 treesitter: highlight injections properly
- 6f75facb9d treesitter: improve vim.treesitter.foldexpr
- 6c8387067d treesitter: inspect-tree remember opts on buf change
- 8179d68dc1 treesitter: logger memory leak
- b6e339eb90 treesitter: make InspectTree correctly handle nested injections (#26085)
- 3af59a415c treesitter: make Visual hl work consistently with foldtext (#25484)
- c7e7f1d4b4 treesitter: make foldexpr work without highlighting (#24167)
- 0211f889b9 treesitter: make sure injections don't return empty ranges (#24595)
- 0df681a91d treesitter: make tests for memoize more robust
- 7fa292c52d treesitter: outdated highlight due to tree with outdated region
- 617d1b28d6 treesitter: prefix treesitter types with vim
- 90a12d4a16 treesitter: prepare highlight states for [s, ]s
- 7e5ce42977 treesitter: properly combine injection.combined regions
- 19a793545f treesitter: redraw added/removed injections properly (#23287)
- 7a76fb8547 treesitter: remove more double recursion
- e124672ce9 treesitter: reset cursor max_start_depth
- 7d97150084 treesitter: return correct match table in iter_captures()
- 3b29b39e6d treesitter: revert to using iter_captures in highlighter
- 315c711700 treesitter: set cursor position when opening inspector
- 48085e40bb treesitter: stop() should treat 0 as current buffer #24450
- 32dc484ec9 treesitter: support subfiletypes in get_lang (#23605)
- b6fdde5224 treesitter: text alignment in checkhealth vim.treesitter
- 0f85aeb478 treesitter: treecursor regression
- 26143d7a5c treesitter: update @markup default links
- 9ff59517cb treesitter: update c queries
- c44d819ae1 treesitter: update folds in all relevant windows (#24230)
- ffb340bf63 treesitter: update folds only once on InsertLeave
- edf9a897f0 treesitter: update highlights for query (#23699)
- b697c0cd4f treesitter: update lua parser and queries (#24148)
- ad95b36985 treesitter: update markdown parser and queries (#24429)
- 39a0e6bf3c treesitter: update parsers and queries
- 3d4eb9d544 treesitter: update queries
- c97de026e3 treesitter: update vimdoc and vimscript queries
- dc7ccd6bca treesitter: use 0 as initial value for computing maximum (#27837)
- 7bc5ee7f93 treesitter: use proper query syntax for inspector (#26274)
- 00e6651880 treesitter: use tree range instead of tree root node range
- 8c9dab3e0d treesitter: use vim.highlight.priorities instead of hardcoded 100 (#24052)
- 674f2513d4 treesitter: validate language alias for injections
- 2bf3e82676 treesitter: validate window before updating preview highlights
- ab2811746e treesitter playground: fix the wrong range of a node displayed i… (#23209)
- f85aa2e67f treesitter.c: improve comments on fenv usage
- c5b9fb2f25 treesitter.foldexpr: check for all insert submodes
- b3bda2f043 tui: `space_buf` overflow when clearing screen (#27352)
- cb2b5e2780 tui: disable DECRQM and DECRQSS queries for Terminal.app (#28453)
- 405bad5e08 tui: do not toggle cursor visibility when flushing the buffer (#26055)
- b76cc974b9 tui: don't forget to update cursor visibility (#26523)
- 911f3d9623 tui: don't overwrite an assertion faliure message on exit
- 168e69ae01 tui: don't set cursor color when there is none (#28236)
- 5a08b5be3c tui: don't set tty background if &bg was set before VimEnter (#23701)
- 00b7428b3b tui: don't use DECRQSS in screen or tmux (#28086)
- 846714ca3e tui: don't use tui->params[] for 'termsync' (#26565)
- 197827321a tui: grid_clear properly clears the screen
- 884a83049b tui: grow termkey's internal buffer for large escape sequences (#26309)
- ad867fee26 tui: handle cursor visibility properly (#26091)
- fd50185492 tui: initialize clear attrs with current terminal background
- c26b39a9aa tui: make :cquit work properly with remote TUI (#25313)
- 3ae62c4706 tui: make disabling title restore old title from stack (#23585)
- 4c31a1b807 tui: make setcellwidths() work for non-ambiwidth chars (#28322)
- 4f235e3caf tui: position cursor at bottom-left before stopping (#23369)
- 0f1b511f23 tui: redraw on SIGWINCH even if size didn't change
- 8e69716953 tui: restore title before exiting alternate screen (#23776)
- 999e167a52 tui: start flush earlier (#26463)
- 367e52cc79 tui: use buflen to calculate remaining buffer size (#26942)
- 3198598e69 tui: use uv_timer_t instead of TimeWatcher for input (#26435)
- 0ce065a332 tui: v:argv does not report the original argv[0] #24015
- bc6fc0123d tutor: Tutor steps don't work on Windows #25251
- bf5703042b tutor: don't use concealed text in expected lines #24316
- e34c23b701 tutor: set a value for ":syntax iskeyword" (#27833)
- 04232a19cc type: remove incorrect arguments from vim.rpc*
- 21152f7905 types: add more annotations to eval.lua
- b7d5b55f74 types: add some return/parameter type annotations (#24867)
- e6947bb1e8 types: make filetype.add parameters optional
- 191cca2566 types: move type annotation for `IterMod`
- 813dd36b72 types: rename win_get_config return type to win_config
- b3342171d5 typing: vim.fn.execute
- 1355861b92 typval: don't treat v:null as truthy (#23281)
- 0592fd5e17 ui: "resize -1" with cmdheight=0 #24758
- ab1c2220f0 ui: activating all ext capabilities without remote UI #28555
- 5b111a8f00 ui: adjust 'smoothscroll' for inner dimensions
- 389f5ca39d ui: adjust the cursor when inserting virtual text
- 046c9a83f7 ui: always use stl/stlnc fillchars when drawing statusline (#25267)
- 0c86828ac5 ui: avoid ambiguity about chunk that clears part of line (#24982)
- e778e01161 ui: avoid recursiveness and invalid memory access #28578
- 0ce3910868 ui: cursor pos with left gravity inline virt_text at eol (#24329)
- 91a4938edf ui: data corruption in remote_ui_raw_line
- 1de82e16c1 ui: delay win_viewport until screen update #24182
- a916523574 ui: doesn't trigger au event when enter is false
- b5a38530ba ui: don't force 'cmdheight' to zero with ext_messages
- fdc8e966a9 ui: don't send empty grid_line with redrawdebug=compositor (#23899)
- 13f55750e9 ui: empty line before the next message after :silent command
- d41b8d4758 ui: ext_cmdline should not move cursor to curwin
- a38d7f9984 ui: fix cursor position with multiple inline virtual text
- e0707d3529 ui: fix edge case around flushing
- 75f350aac6 ui: fix incorrect highlighting when virtual text next to match
- 332b70d2ed ui: fix incorrect highlighting when virtual text wraps with number
- 0c7fa3bdcc ui: fix multi-byte characters highlight in virtual text
- a37c990483 ui: fix overflowing nowrap virtual text not displaying if tab follows
- 5d7afb2e9f ui: fix tabs not being spaced properly after virtual text with no wrap
- 34d862942c ui: fix virtual text not displaying when two overlapping inlines (nowrap)
- c5bf838f8a ui: fix visual and search highlighting interfering with virtual text
- 1936285d98 ui: fixes incorrect rendering when virtual text is not visable and nowrap
- 64e8a3c4d1 ui: handle virtual text with multiple hl in more cases (#25304)
- 981acc2922 ui: propagate line wrapping state on grid_line events
- b8c1b36061 ui: set 'cmdheight' to zero for all open tabpages
- a8522f02e9 ui: startup intro message should be visible with ext_multigrid
- 1cd7824dd6 ui: trigger TabNewEntered after split new tab
- 7626f431d8 ui: update ext_ui widgets when attaching non-remote UI
- 128091a256 ui: wrong cursor position with left gravity inline virt text at eol
- a9418ef8cf ui: wrong display with 0-width inline virt_text at eol (#24854)
- e8b3ed74bc ui-ext: "scroll_delta" handle topfill and skipcol (#24249)
- 43d66c0ebb ui-ext: send title to newly-attached UI
- 519b9929e9 ui.open: some URLs fail on Windows
- 4d654472e6 ui_client: check return code of dup()
- 633bf61d3b ui_client: check return value of channel_job_start (#27729)
- 71ad771ea4 ui_compositor: only reset skipstart at first column (#24776)
- 840749d6c9 undo: fix crash caused by checking undolevels in wrong buffer
- c0a29931e2 unhide: close floating windows first (#25318)
- 9afbfb4d64 unittests: ignore __s128 and __u128 types in ffi
- 9e79f7433e usercmd: Fix buffer overflow in uc_list() (#23225)
- 9802de9334 userfunc: fix possible out of bound access
- 5a8fe0769c vim.deprecate: show deprecation warning in devel versions as well
- ca6dbf3558 vim.iter: use correct cmp function when truncating tail in `take` (#27998)
- e15991c811 vim.json: properly treat luanil options as booleans (#28622)
- fec5e3ab24 vim.region: handle multibyte inclusive selection properly (#26129)
- 2afb04758c vim.system: close check handle (#24270)
- 9b7cf4f0be vim.system: don't process non-fast events during wait() (#27300)
- a44521f46e vim.system: let on_exit handle cleanup after kill
- 6d5f12efd2 vim.system: make timeout work properly
- 57adf8c6e0 vim.ui: open() may wait indefinitely #28325
- e644e7ce0b vim.ui.open: return (don't show) error message
- fd085d9082 vim.ui.open: try wslview before explorer.exe #28424
- 5e4a5f1aaa vim.ui.open: use explorer.exe instead of wslview #26947
- 6cc76011ca watchfiles: skip Created events when poll starts (#23139)
- 9bd4a28079 window: :close crash if WinClosed from float closes window (#27794)
- 731e7f51ee window: :close crash with autocmd, floats and tabpage (#27793)
- 33dfb5a383 window: :close may cause Nvim to quit with autocmd and float
- 2cbfa4b9af window: don't go to unfocusable float when closing (#28455)
- a47be0b2d9 window: prevent win_size_restore from changing cmdheight
- 4bfc7802f0 windows: set stdout to binary mode for --api-info
PERFORMANCE
--------------------------------------------------------------------------------
- a9c551e5e3 cache breakindent/showbreak width in win_lbr_chartabsize
- b5653984e5 don't decode utf8 character multiple times in getvcol()
- cca8a78ea2 improve utf_char2cells() performance (#27353)
- 2f2f12122f remove loop for computing last position in getvcol()
- 32a4c9f4f9 remove redundant strlen in skipwhite (#26177)
- cdf848a314 reuse fast character size calculation algorithm from getvcol()
- 2289ca273c column: avoid counting when max signs are removed from a range
- 4a34da82c1 column: keep track of number of lines that hold up the 'signcolumn'
- f4001d27ef column: only invalidate lines affected by added sign
- 7f084770c2 diagnostic: avoid table copies to filter by severity (#28491)
- 1cb6040554 events: store autocommands in flat vectors (#23256)
- 9af2be292d extmarks: add metadata for efficient filtering of special decorations
- 929e1b7f1c extmarks: avoid unnecessary invalidations for virt_text (#27435)
- 19fb573ad9 extmarks: avoid unnecessary marktree traversal with folds (#24306)
- d44ed3a885 extmarks: better track whether namespace has extmarks (#28615)
- ef94fb69c6 extmarks: don't handle inline virt_text if there is none (#24322)
- 8bb67d64e2 fs: normalize path only once in fs.dir
- 40db569014 iter: make ListIter.totable more efficient (#23714)
- ef1801cc7c iter: reduce number of table allocations
- dcdefd0428 loader: use a quicker version of vim.fs.normalize
- 648f777931 lsp: load buffer contents once when processing semantic tokens responses (#23484)
- 2f4792943a lsp: only joinpath for dirs in watchdirs
- edf05b005f lsp: process semantic tokens response in a coroutine that yields every 5ms (#23375)
- 79a5b89d66 lsp: reduce polling handles for workspace/didChangeWatchedFiles (#23500)
- 4d3a04279d lsp: remove grouping logic from lsp.status (#24096)
- de28a0f84c lsp: replace file polling on linux with per dir watcher (#26108)
- 7e97c773e3 lsp: use async fs_stat for file watching on linux (#26123)
- cdd87222c8 lua: avoid spairs in vim.validate happy path
- c5af5c0b9a lua: faster vim.deprecate() #28470
- c5990f2cdc os/env: os_getenv() allocation when there is no env var set
- 18e62c1bdb redraw: only redraw Visual area when cursor has moved (#27340)
- 94085cfce8 redraw: reduce redraw with undo and extmarks or 'spell' (#27442)
- 516b173780 rtp: reduce rtp scans (#24191)
- 0e11bf0e1a substitute: don't reallocate new_start every time (#24997)
- 4fd852b8cb treesitter: cache fold query (#24222)
- 07080f67fe treesitter: do not scan past given line for predicate match
- c0cb1e8e94 treesitter: filter out trees outside the visible range early
- 2b6c9bbe7f treesitter: incremental foldupdate
- 3ba930844c treesitter: insert/remove items efficiently (#23443)
- a76b689b47 ui-ext: approximate scroll_delta when scrolling too much (#24234)
- 0d1bc795f8 ui_client: skip some initialization not necessary for ui client
- 14a5813c20 vim.fs.normalize: use iterator
BUILD
--------------------------------------------------------------------------------
- c1ff216668 actually export symbols on mac
- 664f2749e6 add "ci" configure preset to reduce verbosity
- 1094d0c0db add CMAKE_C_FLAGS to --version output
- 1290121722 add CMakePresets for deps build to reduce verbosity
- ce6075f82a add check to clint to prevent non-defs header includes
- 624de849de add function add_target
- 82bb7bbc48 add luajit runtime files when installing (#23514)
- 831d662ac6 add sub-targets to the doc target
- 1bf29a0ae1 add system lua include dir for lpeg
- 4cc69f45b4 add ubsan default options
- 4880385809 adjust clang-tidy warning exclusion logic
- b80a8e2c16 adjust how find order is prioritized
- d561830a52 align .clang-format rules with uncrustify config
- c18d7941ef allow sccache as compiler cache
- cd097ab8cc allow using system rocks
- 54d357dce0 bump lpeg to 1.1.0 (#25016)
- 7840760776 bump minimum cmake version to 3.13
- 7a5effb0f9 bump required minimum libvterm version to 0.3.3
- 2835b0daad bump uncrustify to version 0.77
- 77c0d5415b bump uncrustify to version 0.78.1
- 87a45ad9b9 bump uncrustify to version 0.79.0 (#28756)
- 1798a4b5e9 bump uncrustify version
- 826b95203a bundle uncrustify
- 37bc73e9bc change dependency URLs to cache variables
- 1086016477 cmake cleanup
- 404fdb0f36 cmake fixes
- f8310beeed create BINARY_LIB_DIR directory before adding parser
- 9909668111 create a text file for specifying dependency information
- 5a7280ba68 create helper function for simplifying luarocks installation
- f936a962d0 create separate targets for nvim with and without runtime files
- bcaff309b6 disable UnusedIncludes from clangd
- 7a80e169c5 disable all compiler warnings from dependencies
- 8fdc84d0aa disable conversion warnings for GCC
- 310fb2efc3 disable conversion warnings for older GCC versions
- a1c2da56ec do not use GIT_REPOSITORY for local dependencies
- da2130934b don't allow Xcode as generator
- 543e0256c1 don't define FUNC_ATTR_* as empty in headers (#26317)
- 24b60b0f71 don't format deleted files
- c2e47e7bec don't print installed files locally
- f30844008b download busted from own neovim/deps repository
- 5abba97d77 download dependencies with unreliable mirrors from deps repo
- 71384129f7 download libiconv and gettext from `deps` repository
- 801ac2accb drop diff.exe from windows builds
- f0eb3ca916 eliminate semicolons from --version string
- 397b92e02d enable ASAN for MSVC
- 40139738eb enable IWYU on mac
- 25cfe3fd43 enable formatting during rebase
- 517f0cc634 enable lintlua for scripts/ dir #26391
- 45fe4d11ad enable lintlua for src/ dir #26395
- 59d117ec99 enable lintlua for test/ dir
- c3836e40a2 enable lintlua for test/unit/ dir #26396
- 03c3f7887d enforce PREFER_LUA
- 7cb29a572b ensure `make clean` doesn't remove source files
- 0a3645a723 find system luv on ubuntu
- 5bb17958c5 fix "make iwyu" not working (#24873)
- 12ccea5967 fix --luamod-dev not working properly (#24519)
- 75b80516d5 fix link error for `_BitScanForward64` (#28173)
- 3f188bc533 fix parser installation location
- 4fb1739e6f fix uncrustify
- 896b400bff fix universal mac builds
- 01e4a70d66 improve git-cliff CHANGELOG output
- ef92b5a994 include all dependency directories when generating headers
- 187ae67735 introduce variable DEPS_IGNORE_SHA for skipping dependency hash check
- 30a0299bc6 make dependency URL variables non-cached (#23577)
- b4da4783f9 make genappimage.sh work with existing CMAKE_INSTALL_PREFIX
- 9f9cef1b56 make lpeg an imported library
- c1a05f6112 make the vimdoc generation depend on the nvim target (#25876)
- 8b8e607284 move luarocks and rocks installation to main build
- d1bb9bffd5 remove BUSTED_PRG dead code (#23340)
- 8206954a67 remove LOG_DEBUG option
- c48f94d1f3 remove LOG_LIST_ACTIONS option and related code
- 353a4be7e8 remove PVS
- 88366641ad remove USE_BUNDLED_BUSTED option
- ca243f06dd remove `lintdoc` from `lint` target
- 675522af18 remove clint checks and style text covered by uncrustify
- 8be24fed8f remove config-specific find_package search for libuv
- c40872acbd remove duplicate include directories in --version output
- ebb10d6248 remove functionaltest-lua target
- 8ae39eb584 remove git requirement
- 9f8f287c61 remove luarocks
- 339011f59c remove uninstall target
- c8fd82b26d reorder compiler option setting
- 78239f0bbc reorganize cmake files
- 55793bcfa1 revert accidental permission changes (#23319)
- f31f260f0c rework --version generation
- a827003e30 rework IWYU mapping files
- e5d7003b02 rework formatting to use add_glob_target
- 1997ef134a set char to always be signed
- a75ef40f4c set deps default build type to Release (#27495)
- a1550dbf0a silence new clang-tidy warnings
- 383018dbb8 simplify policy-setting for dependencies
- 4788abf2da stop installing parser.h from treesitter
- 26033eee1d suppress bugprone-reserved-identifier warnings
- 34509bbea3 sync IWYU and clint to ignore the same headers (#26228)
- 0a8e66898d update builtin terminfo (#27272)
- a388c852c4 update libtermkey commit
- 706f871014 update uncrustify to 0.76
- f4136c9d42 use -O3 optimization for release builds
- 2c1e8f7e96 use `GIT_REPOSITORY` for local URLs
- e0d97d264f use built nvim artifact to generate eval files (#25875)
- 3d3717de4e use libvterm commit with generated *.inc files
- 4f526b9fd8 use neovim/libtermkey instead of neovim/deps for libtermkey
- 8405649f92 use neovim/libvterm instead of neovim/deps for libvterm
- 2a57613b9b use stylua with add_glob_target
- ae3eed53d6 various build improvements
- c8667c8756 various cmake fixes
- 5cefec7349 various cmake fixes
- bec2ebebda various cmake fixes
- c50951a4d0 various fixes
- 4c91194611 various fixes
- bf0be0f63e various improvements
- 404043e74c vendor libtermkey
- e38a053692 IWYU: export generated headers
- 71141e8cf5 IWYU: fix headers for arabic.h
- 8b428ca8b7 IWYU: fix includes for func_attr.h
- f4aedbae4c IWYU: fix includes for undo_defs.h
- 17d81ac2ab IWYU: map everything in the C99 specification
- c2a5105e88 IWYU: remove arabic_defs.h (#26235)
- 38a20dd89f IWYU: replace most private mappings with pragmas (#26247)
- 09541d514d IWYU: replace public-to-public mappings with pragmas (#26237)
- 39771b2238 Makefile: add nvim to oldtest phony target
- 6823fdb20b PVS: exclude build directory
- 5d387c3388 ci: ensure correct headers are used on macOS
- dcb11c1091 clint: don't allow INIT() in non-header files (#27407)
- c98ef2d7c6 clint: fix deprecation and linter warnings
- 7e2387f41b clint: more precise check for "defs" headers (#26236)
- cf8b2c0e74 iwyu: add a few more _defs.h mappings (#25435)
- 5f03a1eaab lint: remove unnecessary clint.py rules
- eecddd2416 lint: use stylua without add_glob_target
- 25e51d393a lua: vendor coxpcall
- 4dc86477b6 luarc.json: disable luadoc-miss-see-name #24108
- fd9ac5aa8e makefile: remove a phony target uninstall (#24349)
- 978962f9a0 release.sh: regenerate docs after changing NVIM_API_PRERELEASE (#28229)
- 9ca81b0259 release.sh: set VIMRUNTIME when regenerating docs (#28765)
- 4399c4932d release.sh: use git cliff, drop old script
- d0ae529861 scripts: allow a git ref for lsp_types #24377
- bfb81e1a85 snap: remove obsolete snapcraft.yaml
- 981301d11f terminfo: include user capabilities in comments (#28066)
- 6801befcc5 uninstall: don't build if installation manifest not found
- 345dcba629 windows: set longPathAware in manifest #28389
Problem:
- The test for vim.deprecate() has a "mock" which is outdated because
vim.deprecate() no longer uses that.
- The tests get confused after a version bump.
Solution:
Make the tests adapt to the current version.
Problem:
- Since #28678, pre-formatted text in the online documentation do not
render whitespaces correctly: should be pre-like text, but shown like
normal paragraph (see #28754).
- Code blocks with long lines should not be wrapped (e.g. see
|dev-vimpatch-list-management|).
Solution:
- Use `white-space: pre-wrap`. Compared to `white-space: pre`, this
option will make long lines including a very long URL wrapped.
This properly fixes#28754 and #28678.
- Use horizontal scrollbar for the code blocks that are horizontally too
long, instead of wrapping text. This will make the code easy to read
while the pre-text block not interfering with the navigation bar.
runtime(doc): add missing entries for the keys CTRL-W g<Tab> and <C-Tab>
fixes: vim/vim#14777fed01960d2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: smoothscroll may cause infinite loop, with
very narrow windows
(Jaehwang Jung, after v9.1.0280)
Solution: Check for width1 being negative, verify
that win_linetabsize does not overflow
fixes: vim/vim#14750closes: vim/vim#14772eff20eb35d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Compiler warning when building Nvim in Release mode:
In function ‘msg_puts_display’,
inlined from ‘disp_sb_line’ at **/src/nvim/message.c:2647:5:
**/src/nvim/message.c:2165:18: warning: ‘strnlen’ specified bound 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overread]
2165 | size_t len = strnlen(str, (size_t)maxlen);
| ^
Solution: Use strlen() when maxlen is negative.
Problem:
vim.fs.normalize() normalizes too much vim.loader and is slow.
Solution:
Make it faster by doing less. This reduces the times spent in
vim.fs.normalize in vim.loader from ~13ms -> 1-2ms.
Numbers from a relative benchmark:
- Skipping `vim.validate()`: 285ms -> 230ms
- Skipping `path_resolve_dot()`: 285ms -> 60ms
- Skipping `double_slash`: 60ms -> 35ms
Problem:
On the page: https://neovim.io/doc/user/dev_vimpatch.html
The links extend beyond the container and thus end up behind the navigation to the right.
Solution:
Add these lines to get_help_html.lua:
white-space: normal;
word-wrap: break-word;
Re-normalizing a path after a `joinpath` isn't necessary. Calling
`normalize` on each child directory had quite a bit of impact when
traversing a large directory.
A simple test showed:
Before: ~144ms
After: ~80ms
running the following logic against a dir with 4367 child folders and
25826 files:
local files = {}
local start = uv.hrtime()
for name, type in vim.fs.dir(path, { depth = max_depth }) do
table.insert(files, { name, type })
end
local duration = uv.hrtime() - start
Relates to https://github.com/neovim/neovim/issues/23291
ftplugin(python): E16 fix, async keyword support for define (vim/vim#14751)
This change includes the following changes:
- Fix "E16: Invalid range" when using a count with jump to start/end of class/method
- Update define with optional async keyword
- Update maintainer email
86f6e2c2ee
Co-authored-by: Tom Picton <tom@tompicton.com>
runtime(netrw): prefer scp over pscp
regression introduced in ce2ad9ffd79fe6b2307cd46b9
The current logic is a bit funny, in that it checks for an executable of
scp, then pscp and if neither exists, it uses: scp :/
Anyway, let's fall back to the logic used before the above commit.
related: vim/vim#1473943f2edc096
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: The column width 10 for parser name (lang) is too short.
For example, `markdown_inline` has 15 characters, which results in a
slight misalignment with other lines.
e.g. it looked like:
```
- OK Parser: markdown ABI: 14, path: .../parser/markdown.so
- OK Parser: markdown_inline ABI: 14, path: .../parser/markdown_inline.so
- OK Parser: php ABI: 14, path: .../parser/php.so
```
Solution: Use column width 20. As of now, the longest name among those
available in nvim-treesitter has length 18 (`haskell_persistent`).
e.g.:
```
- OK Parser: markdown ABI: 14, path: .../parser/markdown.so
- OK Parser: markdown_inline ABI: 14, path: .../parser/markdown_inline.so
- OK Parser: php ABI: 14, path: .../parser/php.so
```
Problem:
The nvim_win_xx_ns function family introduced in ba0370b1d7
needs more bake-time. Currently it's narrowly defined for windows, but
other scopes ("buffer") and features are likely in the future.
Solution:
- Rename the API with double-underscore to mark it as EXPERIMENTAL.
TODO/FUTURE:
- Rename and change the signature to support more than just "window"
scope, and for other flexibility.
- Open question: we could choose either:
- "store scopes on namespaces", or
- "store namespaces on scopes (w:/b:/…)"
Problem: No scrolling happens with half-page scrolling with line
filling entire window when 'smoothscroll' is disabled.
(Mathias Rav, after v9.1.0285)
Solution: Adjust amount to move cursor by so that it is moved the same
number of lines as was scrolled, even when scrolling different
number of lines than requested with 'nosmoothscroll'.
58448e09be
Problem: Divide by zero with getmousepos() and 'smoothscroll'.
Solution: Don't compute skip_lines when width1 is zero.
(zeertzjq)
closes: vim/vim#14747031a745608
runtime(java): Strive to remain compatible for at least Vim 7.0 (vim/vim#14744)
Also:
- Limit all look-behind regexp patterns.
- Cache regexp capabilities for [:upper:] and [:lower:].
d3952e8cfe
Co-authored-by: Aliaksei Budavei <32549825+zzzyxwvut@users.noreply.github.com>
Problem: filetype: zsh module files are not recognized
Solution: Detect '*.mdh' and '*.epro' as C filetype, '*.mdd' as zsh
filetype, determine zsh-modules '*.pro' from from it's content
(Wu, Zhenyu)
closes: vim/vim#14737887a38cee7
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
runtime(java): Stop handpicking syntax groups for @javaTop (vim/vim#14727)
* runtime(java): Stop handpicking syntax groups for @javaTop
Also:
- Remove the obsolete comment for g:java_allow_cpp_keywords.
- Remove the commented out groups java\%[Debug\]StringError.
- Infer and set the preferred formatting Vim options from
the modeline.
Since vim-6-0u, non-contained syntax groups can be referred
to by using the "contains=TOP..." argument.
* Set &encoding and &termencoding to "utf-8" for test files
* Limit non-ASCII charset to [§ƒɐɘʬʭΑ-Τα-μ] for test files
06bdac1580
Co-authored-by: Aliaksei Budavei <32549825+zzzyxwvut@users.noreply.github.com>
Problem:
The file watcher backends for Linux have too many limitations and
doesn't work reliably.
Solution:
disable didChangeWatchedFiles on Linux
Ref: #27807, #28058, #23291, #26520
Problem: Invalidated regions that are flushed during startup are
cleared with unitialized "clear_attrs", which is perceived as
flickering.
Solution: Initialize "clear_attrs" with current terminal background color.
Problem: Wrong display with 'smoothscroll' when changing quickfix list.
Solution: Reset w_skipcol when replacing quickfix list (zeertzjq).
closes: vim/vim#14730c7a8eb5ff2
This most likely doesn't matter as all windows are redrawn when
switching tabpages and w_valid is reset is entering window, but still
check all tabpages for consistency with changed_common().
runtime(cpp): Fix digit separator in syntax script for octals and floats
Also fix the incorrect rendering of floats that start with ".".
closes: vim/vim#14724c5def6561d
Co-authored-by: Wu Yongwei <wuyongwei@gmail.com>
Rename the field `result` to `params` in the `data` table for
`LspProgress` autocmds. This aligns with LspNotify.
The previous name was chosen because the initial handler implementation
mistakenly had a parameter name `result` instead of `params` for the
`$/progress` LSP "notification" handler. However, `params` would be a
more appropriate name that is more consistent with the underlying LSP
type (`ProgressParams`).
See also: https://microsoft.github.io/language-server-protocol/specifications/specification-current/#progress
Problem:
While LuaCATS's generics system are still considered WIP by luals, they
currently support type captured generics.
See "Capture with Backtick" example:
https://luals.github.io/wiki/annotations/#generic
Solution:
Add support for it in the LuaCATS grammar
Problem:
inlay_hint `enable(<no args>)` does not activate inlay hints on open
buffers. If a buffer does not have a corresponding `bufstate` in
`bufstates`, then `enable` all buffers will not take effect on it.
Solution:
Make the effective range determined by the loaded buffers.
Fix#28624
runtime(sh,zsh): clear $MANPAGER in ftplugin before shelling out
Say you use Vim and set MANPAGER='vim -M +MANPAGER --not-a-term -'; then
:{Zs,S}hKeywordPrg (or K) will crap out and spew terminal garbage into
less when bash's "help" fails. This was introduced by 2f25e40b1
(runtime: configure keywordpg for some file types (vim/vim#5566), 2023-08-23)
and may be present in other files touched by that commit.
Make the "man" invocation sensible by unsetting MANPAGER in the
environment.
Note that changing MANPAGER for `:terminal` is not needed; Vim within
Vim is perfectly fine.
closes: vim/vim#146798d8cb45756
Co-authored-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Revert the default LSP mappings before the 0.10 release as these might
need some further consideration. In particular, it's not clear if "c"
prefixed maps in Normal mode are acceptable as defaults since they
interfere with text objects or operator ranges.
We will re-introduce default mappings at the beginning of the 0.11
release cycle, this reversion is only for the imminent 0.10 release.
Some parsers for, e.g., LaTeX or PHP have anonymous nodes like `"\"` or `"\text"` that behave wonkily (especially the first example) in the `InspectTree` window, so this PR escapes them by adding another backslash in front of them
reverts e0d92b9cc2#28502
Problem:
`vim.ui.open()` has a `pcall()` like signature, under the assumption
that this is the Lua idiom for returning result-or-error. However, the
`result|nil, errmsg|nil` pattern:
- has precedent in:
- `io.open`
- `vim.uv` (`:help luv-error-handling`)
- has these advantages:
- Can be used with `assert()`:
```
local result, err = assert(foobar())
```
- Allows LuaLS to infer the type of `result`:
```
local result, err = foobar()
if err then
...
elseif result then
...
end
```
Solution:
- Revert to the `result|nil, errmsg|nil` pattern.
- Document the pattern in our guidelines.
This avoids redraw when adding/removing an empty namespace for a window.
This also avoids marktree traversal when clearing a namespace that has
already been cleared, which is added as a benchmark.
- Sort sections according to custom preference instead of
alphabetically. It is ordered according to "most relevant" to "least
relevant" to users.
- Sort commits alphabetically
- Don't uppercase the first letter of the commit message
Experimental and subject to future changes.
Add a way to redraw certain elements that are not redrawn while Nvim is waiting
for input, or currently have no API to do so. This API covers all that can be
done with the :redraw* commands, in addition to the following new features:
- Immediately move the cursor to a (non-current) window.
- Target a specific window or buffer to mark for redraw.
- Mark a buffer range for redraw (replaces nvim__buf_redraw_range()).
- Redraw the 'statuscolumn'.
Problem:
Inlay hints `enable()` does not fully implement the `:help dev-lua` guidelines:
Interface conventions ~
- When accepting a buffer id, etc., 0 means "current buffer", nil means "all
buffers". Likewise for window id, tabpage id, etc.
- Examples: |vim.lsp.codelens.clear()| |vim.diagnostic.enable()|
Solution:
Implement globally enabling inlay hints.
* refactor(lsp): do not rely on `enable` to create autocmds
* refactor(lsp): make `bufstates` a defaulttable
* refactor(lsp): make `bufstate` inherit values from `globalstate`
* feat(lsp): `vim.lsp.inlay_hints` now take effect on all buffers by default
* test(lsp): add basic tests for enable inlay hints for all buffers
* test(lsp): add test cases cover more than one buffer
Problem: cursor() and getregion() don't handle v:maxcol well.
Solution: Add special handling for v:maxcol like setpos() does.
(zeertzjq)
closes: vim/vim#146982ffdae7948
Problem: filetype: stylus files not recognized
Solution: Detect '*.styl' and '*.stylus' as stylus filetype,
include indent, filetype and syntax plugin
(Philip H)
closes: vim/vim#146562d919d2744
Co-authored-by: Philip H <47042125+pheiduck@users.noreply.github.com>
Problem: Calling :redraw from vim.ui_attach() callback results in
recursive cmdline/message events.
Solution: Avoid recursiveness where possible and replace global "call_buf"
with separate, temporary buffers for each event so that when a Lua
callback for one event fires another event, that does not result
in invalid memory access.
`[Backport release-x.y]` will no longer be part of the pull request
title. This means the PR titles will go from looking like
```
[Backport release-0.9] fix(languagetree): remove double recursion in LanguageTree:parse
```
to
```
fix(languagetree): remove double recursion in LanguageTree:parse
```
The benefit of this is that pull requests merged with the "Squash and
Merge" strategy (which uses the PR title as the commit message), will
still follow the conventional commits specification. This will help
tools that rely on conventional commits such as git-cliff.
The `backport` label is added to backported PRs to help distinguish
between backport PRs with regular PRs in the "Pull Requests" tab on
github.
To reduce confusion with the `backport` label, the label to trigger the
backporting has been changed from `backport release-x.y` to
`ci:backport release-x.y`. This is also more consistent with other
labels that trigger a CI job which all use the `ci:` prefix.
This reverts commit 15e77a56b7.
Subpriorities were added in https://github.com/neovim/neovim/pull/27131
as a mechanism for enforcing query order when using iter_matches in the
Tree-sitter highlighter. However, iter_matches proved to have too many
complications to use in the highlighter so we eventually reverted back
to using iter_captures (https://github.com/neovim/neovim/pull/27901).
Thus, subpriorities are no longer needed and can be removed.
Problem: filetype: .out files recognized as tex files
Solution: Do not set an explicit filetype until it is clear what this
should be (shane.xb.qian)
closes: vim/vim#14670e35478bc9d
Co-authored-by: shane.xb.qian <shane.qian@foxmail.com>
Problem: Kbuild files are not recognized.
Solution: Detect Kbuild files as make files.
(Bruno Belanyi)
closes: vim/vim#146765cbc9a69e5
Co-authored-by: Bruno BELANYI <bruno@belanyi.fr>
Follow-up to #28490
Problem:
The new behaviour of goto_next/prev() of navigating to the next highest
severity doesn't work well when diagnostic providers have different
interpretations of severities. E.g. the user may be blocked from
navigating to a useful LSP warning, due to some linter error.
Solution:
The behaviour of next highest severity is now a hidden option
`_highest = true`. We can revisit how to integrate this behaviour
during the 0.11 cycle.
runtime(java): Improve the recognition of the "indent" method declarations (vim/vim#14659)
There is a flaw in the current implementation that has been
exacerbated around v5.2. It lies in the recognition of all
three indentation styles simultaneously: a tab, two space,
and eight space character(s). With it, it is not uncommon
to misidentify various constructs as method declarations
when they belong to two-space indented members and other
blocks of a type and are offset at eight space characters or
a tab from the start of the line.
For example,
------------------------------------------------------------
class Test
{
static String hello() { return "hello"; }
public static void main(String[] args)
{
try {
if (args.length > 0) {
// FIXME: eight spaces.
System.out.println(args[0]);
} else {
// FIXME: a tab.
System.out.println(hello());
}
} catch (Exception e) {
throw new Error(e);
}
}
}
------------------------------------------------------------
------------------------------------------------------------
:let g:java_highlight_functions = 'indent'
:doautocmd Syntax
------------------------------------------------------------
A better approach is to pick an only indentation style out
of all supported styles (so either two spaces _or_ eight
spaces _or_ a tab). Note that tabs and spaces can still be
mixed, only the leading tab or the leading run of spaces
matters for the recognition. And there is no reason to not
complement the set of valid styles with any number of spaces
from 1 to 8, inclusively.
Please proceed with the necessary change as follows:
- rename from "indent" to "indent2" for a 2-space run;
- rename from "indent" to "indent8" for an 8-space run;
- continue to have "indent" for a tab run;
- define an "indent" variable with a suffix number denoting
the preferred amount of indentation for any other run of
spaces [1-8].
As before, this alternative style of recognition of method
declarations still does not prescribe naming conventions and
still cannot recognise method declarations in nested types
that are conventionally indented.
The proposed changes also follow suit of "style" in stopping
the claiming of constructor and enum constant declarations.
c4d0c8c812
Co-authored-by: Aliaksei Budavei <32549825+zzzyxwvut@users.noreply.github.com>
Problem: cbuffer and similar quickfix and locationlist commands don't
accept a range, even so it is documented they should
(ilan-schemoul, after 8.1.1241)
Solution: Define ex commands with ADDR_LINES instead of ADDR_OTHER
fixes: vim/vim#14638closes: vim/vim#14657652c821366
Co-authored-by: Christian Brabandt <cb@256bit.org>
Instead of painfully messing with timing to determine if queries were
reparsed, we can simply keep a counter next to the call to ts_query_new
Also memoization had a hidden dependency on the garbage collection of
the the key, a hash value which never is kept around in memory. this was
done intentionally as the hash does not capture all relevant state for the
query (external included files) even if actual query objects still
would be reachable in memory. To make the test fully deterministic in
CI, we explicitly control GC.
In particular, TUI manages its own screen buffers and highlight table, so we don't need
to run init_highlight() and default_grid_alloc() in the ui client process.
Problem: Calculating line height for unnecessary amount of lines with
half-page scrolling (zhscn, after 9.1.0280)
Solution: Replace "limit_winheight" argument with higher resolution
"max" argument to which to limit the calculated line height
in plines_m_win() to (Luuk van Baal)
32d701f51b
Problem:
The new LSP "refactor menu" keybinding "crr" is also defined in visual
mode, which overlaps with the builtin "c".
Solution:
Use CTRL-R instead of "crr" for visual mode.
fix#28528
Based on feedback from #28324, pass -H and -I to regular grep
(available on all platforms officially supported by Neovim), and
only pass -uu to ripgrep. This makes :grep ignore binary files by
default in both cases.
* fix(treesitter): enforce lowercase language names
Problem: On case-insensitive file systems (e.g., macOS), `has_parser`
will return `true` for uppercase aliases, which will then try to inject
the uppercase language unsuccessfully.
Solution: Enforce and assume parser names to be lowercase when
resolving language names.
Reverts parts of https://github.com/neovim/neovim/pull/27674
LSP snippets typically do include tabs or spaces to add extra
indentation and don't rely on the client using `autoindent`
functionality.
For example:
public static void main(String[] args) {\n\t${0}\n}
Notice the `\t` after `{\n`
Adding spaces or tabs independent of that breaks snippets for languages
like Haskell where you can have snippets like:
${1:name} :: ${2}\n${1:name} ${3}= ${0:undefined}
To generate:
name ::
name = undefined
Problem: when line is blank link then there will got an invalid column number in math.min compare.
Solution: make sure the min column number is 0 not an illegal number.
There's no "rule" or bad practice or whatever that says we cannot
generate c files. it is is just that we have ~20 generated headers
and ~2 generated sources and there is nothing in these two generated
source files which sets them aparts. Lua bindings are not different from
rpc bindings, and pathdef is not different from versiondef.
So to simplify build logic and ease the future port to build.zig,
streamline the build to only have generated headers, no direct generated
.c files.
Also "nlua_add_api_functions" had its prototype duplicated twice which
defeated the point of having mandatory prototypes (one source of truth).
Problem: Enabling ext_messages claims to set 'cmdheight' to zero, but
only does so for the current tabpage.
Solution: Set stored 'cmdheight' value to zero for all tabpages.
Problem: When :edit an existing buffer, line('w$') may return a
wrong result.
Solution: Reset w_valid in curwin_init() (Jaehwang Jung)
`do_ecmd()` reinitializes the current window (`curwin_init()`) whose
`w_valid` field may have `VALID_BOTLINE` set. Resetting `w_botline`
without marking it as invalid makes subsequent `validate_botline()`
calls a no-op, thus resulting in wrong `line('w$')` value.
closes: vim/vim#14642eb80b8304e
Co-authored-by: Jaehwang Jung <tomtomjhj@gmail.com>
Problem:
vim.iter has both `rfind()` and various `*back()` methods, which work
in "reverse" or "backwards" order. It's inconsistent to have both kinds
of names, and "back" is fairly uncommon (rust) compared to python
(rfind, rstrip, rsplit, …).
Solution:
- Remove `nthback()` and let `nth()` take a negative index.
- Because `rnth()` looks pretty obscure, and because it's intuitive
for a function named `nth()` to take negative indexes.
- Rename `xxback()` methods to `rxx()`.
- This informally groups the "list-iterator" functions under a common
`r` prefix, which helps discoverability.
- Rename `peekback()` to `pop()`, in duality with the existing `peek`.
Fixes regression introduced in #28030
If an LSP server is restarted, then the associated `nvim_buf_attach`
call will not detach if no buffer changes are sent between the client
stopping and a new one being created. This leads to `nvim_buf_attach`
being called multiple times for the same buffer, which then leads to
changetracking sending duplicate requests to the server (one per
attach).
To solve this, introduce separate tracking (client agnostic) on which
buffers have had calls to `nvim_buf_attach`.
vim.notify cannot be suppressed and it is not always necessary to
display a visible warning to the user if the RPC process fails to start.
For instance, a user may have the same LSP configuration across systems,
some of which may not have all of the LSP server executables installed.
In that case, the user receives a notification every time a file is
opened that they cannot suppress.
Instead of using vim.notify in vim.lsp.rpc, propagate a normal error up
through the call stack and use vim.notify in vim.lsp.start() only if
the "silent" option is not set.
This also updates lsp.start_client() to return an error message as its
second return value if an error occurred, rather than calling vim.notify
directly. Callers of lsp.start_client() will need to update call sites
appropriately if they wish to report errors to the user (or even better,
switch to vim.lsp.start).
Problem: ops.c code uses too many strlen() calls
Solution: Refactor code and remove more strlen() calls
(John Marriott)
closes: vim/vim#1459838b9f45253
Co-authored-by: John Marriott <basilisk@internode.on.net>
runtime(asm): fix undefined variable in indent plugin
It's an indent script, so we need to set the b:undo_indent variable
instead of the b:undo_ftplugin var.
fixes: vim/vim#1460298b12ede31
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
`vim.ui.open` unnecessarily invents a different success/failure
convention. Its return type was changed in 57adf8c6e0, so we might as
well change it to have a more conventional form.
Solution:
Change the signature to use the `pcall` convention of `status, result`.
This reverts a large portion of
2c1e8f7e96.
The conclusion from that commit is incorrect: local builds are not
used/updated correctly so much as it's not used at all. Instead the
build will always use `master` branch rather than the current files.
runtime(java): Improve the recognition of the "style" method declarations
- Request the new regexp engine (v7.3.970) for [:upper:] and
[:lower:].
- Recognise declarations of in-line annotated methods.
- Recognise declarations of _strictfp_ methods.
- Establish partial order for method modifiers as shown in
the MethodModifier production; namely, _public_ and
friends should be written the leftmost, possibly followed
by _abstract_ or _default_, or possibly followed by other
modifiers.
- Stop looking for parameterisable primitive types (void<?>,
int<Object>, etc., are malformed).
- Stop looking for arrays of _void_.
- Acknowledge the prevailing convention for method names to
begin with a small letter and for class/interface names to
begin with a capital letter; and, therefore, desist from
claiming declarations of enum constants and constructors
with javaFuncDef.
Rationale:
+ Constructor is distinct from method:
* its (overloaded) name is not arbitrary;
* its return type is implicit;
* its _throws_ clause depends on indirect vagaries of
instance (variable) initialisers;
* its invocation makes other constructors of its type
hierarchy invoked one by one, concluding with the
primordial constructor;
* its explicit invocation, via _this_ or _super_, can
only appear as the first statement in a constructor
(not anymore, see JEP 447); else, its _super_ call
cannot appear in constructors of _record_ or _enum_;
and neither invocation is allowed for the primordial
constructor;
* it is not a member of its class, like initialisers,
and is never inherited;
* it is never _abstract_ or _native_.
+ Constructor declarations tend to be few in number and
merit visual recognition from method declarations.
+ Enum constants define a fixed set of type instances
and more resemble class variable initialisers.
Note that the code duplicated for @javaFuncParams is written
keeping in mind for g:java_highlight_functions a pending 3rd
variant, which would require none of the :syn-cluster added
groups.
closes: vim/vim#14620a4c085a3e6
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
vim.fs.root() is a function for finding a project root relative to a
buffer using one or more "root markers". This is useful for LSP and
could be useful for other "projects" designs, as well as for any plugins
which work with a "projects" concept.
Instead of adding all diagnostics matching lnum filters to a table, and
then copying that table to another table while applying the severity
filter, this changes the flow to only add diagnostics matching both
filters in the first pass.
Problem: Vim9: missing :endif not reported when using :windo.
Solution: Pass a getline function to do_cmdline(). (closesvim/vim#7650)
9567efa1b4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Specifically, functions that are run in the context of the test runner
are put in module `test/testutil.lua` while the functions that are run
in the context of the test session are put in
`test/functional/testnvim.lua`.
Closes https://github.com/neovim/neovim/issues/27004.
Problem: `vim.deprecate()` can be relatively significantly slower than
the deprecated function in "Nvim" plugin.
Solution: Optimize checks for "Nvim" plugin. This also results into not
distinguishing "xxx-dev" and "xxx" versions when doing checks, which
is essentially covered by the deprecation logic itself.
With this rewrite I get the times from #28459: `{ 0.024827, 0.003797, 0.002024, 0.001774, 0.001703 }`.
For quicker reference:
- On current Nightly it is something like `{ 3.72243, 0.918169, 0.968143, 0.763256, 0.783424 }`.
- On 0.9.5: `{ 0.002955, 0.000361, 0.000281, 0.000251, 0.00019 }`.
Problem: tests: test_vim9_builtin is a bit slow
Solution: source tests from a buffer instead of
writing and sourcing a file (Yegappan Lakshmanan)
closes: vim/vim#1461422697b6179
N/A patch:
vim-patch:9.1.0299: Vim9: return type not set for a lambda assigned to script var
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Crash when typing many keys with D- modifier (after 9.1.0227).
Solution: Don't treat a 0x80 byte inside a special sequence as the start
of a special sequence (zeertzjq).
closes: vim/vim#146136b13e3d4e4
**Problems**
When launching Neovim on Terminal.app on macOS (Apple Terminal),
it briefly shows like
`p$qm+q5463;524742;73657472676266;73657472676262$qm` in orange
background color partially on the screen.
**Solution**
Since Terminal.app seems not supporting DECRQM and DECRQSS queries,
calling `tui_request_term_mode` and `tui_query_extended_underline`
caused this unexpected output.
Therefore, if we know it's Apple Terminal (when `nsterm` is `true`),
don't call these checks.
Tested on Terminal.app (2.14, 453) on macOS 14.4.1.
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Page scrolling does not always place the cursor at the top or
bottom of the window (Mathias Rav)
Solution: Place the cursor at the top or bottom of the window.
(Luuk van Baal)
4b6b0c4024
TODO:
FUNC_API_REMOTE_ONLY APIs such as `nvim_ui_*` cannot (yet) be used in
`nvim_exec_lua`. We can change FUNC_API_REMOTE_ONLY to allow
Vimscript/Lua to pass an explicit `channel_id`. #28437
ref https://github.com/neovim/neovim/issues/19596
FAILED test/functional/plugin/health_spec.lua @ 37: :checkhealth completions can be listed via getcompletion()
test/functional/plugin/health_spec.lua:40: Expected objects to be the same.
Passed in:
(string) 'provider.node'
Expected:
(string) 'provider.clipboard'
stack traceback:
test/functional/plugin/health_spec.lua:40: in function <test/functional/plugin/health_spec.lua:37>
Problem:
Besides being redundant with vim.iter():flatten(), `tbl_flatten` has
these problems:
- Has `tbl_` prefix but only accepts lists.
- Discards some results! Compare the following:
- iter.flatten():
```
vim.iter({1, { { a = 2 } }, { 3 } }):flatten():totable()
```
- tbl_flatten:
```
vim.tbl_flatten({1, { { a = 2 } }, { 3 } })
```
Solution:
Deprecate tbl_flatten.
Note:
iter:flatten() currently fails ("flatten() requires a list-like table")
on this code from gen_lsp.lua:
local anonym = vim.iter({ -- remove nil
anonymous_num > 1 and '' or nil,
'---@class ' .. anonymous_classname,
}):flatten():totable()
Should we enhance :flatten() to work for arrays?
Problem: tests: test_winfixbuf is a bit slow
Solution: use defer if possible, reset hidden option, use --not-a-term
when starting Vim using system() (Yegappan Lakshmanan)
closes: vim/vim#146114baf908d60
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem:
While the fold level computation is incremental, the evaluation of the
foldexpr is done on the full buffer. Despite that the foldexpr reads
from the cache, it can take tens of milliseconds for moderately big (10K
lines) buffers.
Solution:
Track the range of lines on which the foldexpr should be evaluated.
Problem: Using xstrlcpy() when the exact length of the string to be
copied is known is not ideal because it requires adding 1 to
the length and an unnecessary strlen().
Solution: Add xmemcpyz() and use it in place of such xstrlcpy() calls.
runtime(bp): fix comment definition in filetype plugin (vim/vim#14594)
I somehow messed up the previous patch, I think a copy-paste error when
creating the file.
Blueprint files have C and C++ style comments, not shell-like '#'
comments.
cee034112d
Co-authored-by: Bruno BELANYI <bruno@belanyi.fr>
Problem:
The use-case for the convenience functions vim.iter.map(),
vim.iter.filter(), vim.iter.totable() is not clear.
Solution:
Drop them for now. We can revisit after 0.10 release.
Problem: runtime(uci): No support for uci file types
(Wu, Zhenyu)
Solution: include basic uci ftplugin and syntax plugins
(Colin Caine)
closes: vim/vim#145754b3fab14db
Co-authored-by: Colin Caine <complaints@cmcaine.co.uk>
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
runtime(java): Support "g:ftplugin_java_source_path" with archived files
Also, document for "g:ftplugin_java_source_path" its current
modification of the local value of the 'path' option.
closes: vim/vim#1457036e667ab83
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: No test that completing a partial mapping clears 'showcmd'.
Solution: Complete partial mappings in Test_showcmd_part_map() instead
of using :echo. Adjust some comments (zeertzjq).
closes: vim/vim#14580094c4390bd
Problem:
We need to establish a pattern for `enable()`.
Solution:
- First `enable()` parameter is always `enable:boolean`.
- Update `vim.diagnostic.enable()`
- Update `vim.lsp.inlay_hint.enable()`.
- It was not released yet, so no deprecation is needed. But to help
HEAD users, it will show an informative error.
- vim.deprecate():
- Improve message when the "removal version" is a *current or older* version.
- Updates nixpkgs to source a necessary Tree-sitter version
- Updates to a new llvm version as the old one was removed from nixpkgs
- Properly moves `doCheck` from a regular param to an attribute option
Problem: 'showcmd' is wrong for partial mapping with multibyte char,
and isn't very readable with modifyOtherKeys.
Solution: Decode multibyte char and merge modifiers into the char.
(zeertzjq)
This improves the following situations:
- Multibyte chars whose individual bytes are considered unprintable are
now shown properly in 'showcmd' area.
- Ctrl-W with modifyOtherKeys now shows ^W in 'showcmd' area.
The following situation may still need improvement:
- If the char is a special key or has modifiers that cannot be merged
into it, internal keycodes are shown in 'showcmd' area like before.
This applies to keys typed in Normal mode commands as well, and it's
hard to decide how to make it more readable due to the limited space
taken by 'showcmd', so I'll leave it for later.
closes: vim/vim#14572acdfb8a979
Problem: Cursor wrong after using setcellwidth() in terminal
(mikoto2000)
Solution: output additional spaces, so the behaviour matches the GUI
(mikoto2000)
fixes: vim/vim#14539closes: vim/vim#14540
Fix CUI `setcellwidths` characters draw behavior to same GUI behavior.
e20fa59903
This is already fixed and tested in Nvim in #28322.
Co-authored-by: mikoto2000 <mikoto2000@gmail.com>
Problem: a few memory leaks are found
(LuMingYinDetect )
Solution: properly free the memory
Fixes the following problems:
- Memory leak in f_maplist()
fixes: vim/vim#14486
- Memory leak in option.c
fixes: vim/vim#14485
- Memory leak in f_resolve()
fixes: vim/vim#14484
- Memory leak in f_autocmd_get()
related: vim/vim#14474
- Memory leak in dict_extend_func()
fixes: vim/vim#14477fixes: vim/vim#14238closes: vim/vim#1451729269a71b5
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Error with matchaddpos() and empty list
(@rickhow)
Solution: Return early for an empty list
fixes: vim/vim#14525closes: vim/vim#14563f7d31adcc2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
The order of the validation performed by vim.validate() is
unpredictable.
- harder to write reliable tests.
- confusing UX because validation result might return different errors randomly.
Solution:
Iterate the input using `vim.spairs()`.
Future:
Ideally, the caller could provide an "ordered dict".
Problem: Renaming non-current buffer changes working directory when
'autochdir' is set.
Solution: Temporarily disable 'autochdir'. Add more tests for the
win_set_buf change.
- Test maparg() and maplist() in the same test.
- Use matches() instead of string.match().
- Avoid overlong lines and strange spacing in exec_lua().
- Revert code change from last PR as the variable may be needed.
Problem: String interpolation fails for List type
Solution: use implicit string(list) for string interpolation and :put =
(Yegappan Lakshmanan)
related: vim/vim#14529closes: vim/vim#14556bce51d9005
Cherry-pick eval_to_string_eap() from patch 8.2.1914.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: filetype: some requirements files are not recognized
Solution: Detect '*-requirements.txt', 'constraints.txt',
'requirements.in', 'requirements/*.txt' and 'requires/*.txt'
as requirements filetype, include pip compiler, include
requirements filetype and syntax plugin
(Wu, Zhenyu, @raimon49)
closes: vim/vim#14379f9f5424d3e
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Co-authored-by: raimon <raimon49@hotmail.com>
runtime(java): Recognise non-ASCII identifiers (vim/vim#14543)
* runtime(java): Recognise non-ASCII identifiers
Also:
- Remove the already commented out and less general in its
definition javaFuncDef alternative.
- Stop recognising some bespoke {p,trace} debugging API.
Non-ASCII identifiers have been supported from the outset
of the Java language.
> An _identifier_ is an unlimited-length sequence of _Java
> letters_ and _Java digits_, the first of which must be a
> Java letter. An identifier cannot have the same spelling
> (Unicode character sequence) as a keyword . . . Boolean
> literal . . . or the null literal . . .
> . . . . . . . .
> Letters and digits may be drawn from the entire Unicode
> character set . . .
> . . . . . . . .
> A Java letter is a character for which the method
> Character.isJavaLetter . . . returns true. A Java
> letter-or-digit is a character for which the method
> Character.isJavaLetterOrDigit . . . returns true.
> . . . . . . . .
> The Java letters include . . . for historical reasons, the
> ASCII underscore (_) . . . and dollar sign ($) . . .
(Separate syntax tests will be written when particular parts
now touched will have been further improved.)
Reference:
https://javaalmanac.io/jdk/1.0/langspec.pdf [§3.8]
* Take on the maintenance of Java filetype and syntax files
4052474a1b
Co-authored-by: Aliaksei Budavei <32549825+zzzyxwvut@users.noreply.github.com>
Problem: Vim9: Not all function argument types are properly checked.
Solution: Add and improve argument type checks. (Yegappan Lakshmanan,
closesvim/vim#8839)
fc3b775055
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: filetype: some mail tools not recognized
Solution: Detect '.mbsncrc' as conf, '.msmtprc' as msmtp
and '.notmuch-config' as ini filetype
(Shane-XB-Qian)
closes: vim/vim#14533a7a9a476cf
Co-authored-by: shane.xb.qian <shane.qian@foxmail.com>
runtime(i3config/swayconfig): update syntax scripts
modifications with the goals of:
- simplifying structure by using group `cluster`s
- improving visual highlighting responsiveness by using `nextgroup`
- improving recursive wm-msg command highlighting
- separating command variants meant for runtime and for config only
closes: vim/vim#14544dd83b63eb5
Problem: No test for highlight behavior with 'ambiwidth'.
Solution: Add a screendump test for 'ambiwidth' with 'cursorline'.
(zeertzjq)
closes: vim/vim#14554a59e031aa0
Problem:
vim.diagnostic.enable() does not match the signature of vim.lsp.inlay_hint.enable()
Solution:
- Change the signature so that the first 2 args are (bufnr, enable).
- Introduce a 3rd `opts` arg.
- Currently it only supports `opts.ns_id`.
Problem:
:checkhealth node.js check fails:
ERROR Failed to run healthcheck for "provider.node" plugin ...
node/health.lua:98: attempt to call local 'message' (a string value)
`message` is called as a function, when it is actually a string.
Solution:
Pass `message` to `warn()` as an argument.
Fix#28346
Problem:
`vim.diagnostic.is_disabled` and `vim.diagnostic.disable` are unnecessary
and inconsistent with the "toggle" pattern (established starting with
`vim.lsp.inlay_hint`, see https://github.com/neovim/neovim/pull/25512#pullrequestreview-1676750276
As a reminder, the rationale is:
- we always need `enable()`
- we always end up needing `is_enabled()`
- "toggle" can be achieved via `enable(not is_enabled())`
- therefore,
- `toggle()` and `disable()` are redundant
- `is_disabled()` is a needless inconsistency
Solution:
- Introduce `vim.diagnostic.is_enabled`, and `vim.diagnostic.enable(…, enable:boolean)`
- Note: Future improvement would be to add an `enable()` overload `enable(enable:boolean, opts: table)`.
- Deprecate `vim.diagnostic.is_disabled`, `vim.diagnostic.disable`
Problem:
vim.ui.open "locks up" Nvim if the spawned process does not terminate. #27986
Solution:
- Change `vim.ui.open()`:
- Do not call `wait()`.
- Return a `SystemObj`. The caller can decide if it wants to `wait()`.
- Change `gx` to `wait()` only a short time.
- Allows `gx` to show a message if the command fails, without the
risk of waiting forever.
Problem: CI fails with t_?? test
Solution: use assert_match instead of assert_equal
and test only until t_xo, depending on system
there may be several more termcap codes coming
0d87e3c711
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: When used terminal with XON/XOFF flow control, vim tries to
still make CTRL-S mapping available, which results in severe
screen corruption, especially on large redraws, and even
spurious inputs (John Tsiombikas)
Solution: Disallow CTRL-S mapping if such terminal is recognized.
Don't remove IXON from the bitmask inversion.
(Anton Sharonov)
*** When started like this:
TERM=vt420 vim
:set termcap
shows "t_xon=y"
map <C-S> :echo "abc"<CR>
does nothing (after <C-S> output freezes and subsequent <C-Q>
unfreezes it)
*** When started like this:
TERM=xterm vim
:set termcap
shows "t_xon="
map <C-S> :echo "abc"<CR>
works (after <C-S> one see "abc" string echo-ed)
fixes: vim/vim#12674closes: vim/vim#1454249528da8a6
Co-authored-by: Anton Sharonov <anton.sharonov@gmail.com>
runtime(vim): Update base-syntax, fix nested function folding (vim/vim#14397)
Only match function folding start and end patterns at the start of a
line, excluding heredocs and :append/:change/:insert commands.
Fixesvim/vim#143934ba70cab37
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: vim/vim#14529closes: vim/vim#14541f01493c550
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: noautocmd is confusing; despite its name, it doesn't block all
autocommands (instead it blocks only those related to setting the buffer), and
is commonly used by plugins to open windows while producing minimal
side-effects.
Solution: be consistent and block all autocommands when noautocmd is set.
This includes WinNew (again), plus autocommands from entering the window (if
enter is set) like WinEnter, WinLeave, TabEnter, .etc.
See the discussion at https://github.com/neovim/neovim/pull/14659#issuecomment-2040029517
for more information.
Remove win_set_buf's noautocmd argument, as it's no longer needed.
NOTE: pum_create_float_preview sets noautocmd for win_set_buf, but all its
callers already use block_autocmds.
Despite that, pum_create_float_preview doesn't actually properly handle
autocommands (it has no checks for whether those from win_enter or
nvim_create_buf free the window).
For now, ensure autocommands are blocked within it for correctness (in case it's
ever called outside of a block_autocmds context; the function seems to have been
refactored in #26739 anyway).
Problem: Wrong cursor position after using setcellwidths().
Solution: Invalidate cursor position in addition to redrawing.
(zeertzjq)
closes: vim/vim#1454505aacec6ab
Reorder functions in test_utf8.vim to match upstream.
Add more filters so that LuaJIT can parse headers on macOS 14.
The system headers use a style of enum introduced in C++11 (and allowed
as an extension in C by clang) of the form:
enum Name : Type {
The system headers also use bitfields in the mach_vm_range_recipe* types:
struct Foo { int bar : 32; }
Neither of these constructs can be parsed by LuaJIT, so filter the lines
out. Neither of these declarations are used by neovim's unittests.
There is a (now closed) issue about bitfields for LuaJIT:
https://github.com/LuaJIT/LuaJIT/issues/951Fixes#26145.
runtime(vim): Update base-syntax, add legacy header folding
Allow for syntax-based folding of Vim9 script legacy header regions.
This is enabled with the "H" flag of the g:vimsyn_folding config variable.
closes: vim/vim#14530ce06493aeb
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Crash when using heredoc with comment in command block.
Solution: Handle a newline more like the end of the line, fix coverity
warning (zeertzjq).
closes: vim/vim#145351f5175d9af
runtime(i3config): Line continuation is not detected for 'set' command (vim/vim#14531)
Problem: Valid i3config syntax is highlighted as error.
Solution: Skip over line-breaks correctly.
5392970921
Co-authored-by: julio-b <julio.bacel@gmail.com>
Problem:
The `:terminal` auto-close logic does not support `&shell` that has
arguments, e.g., `/bin/bash -O globstar`.
Solution:
Join `argv` and match `&shell`. This is not perfect since `&shell` may
contain irregular spaces and quotes, but it seems to be good enough.
If the filename passed to vim_FullName() is a relative directory, and
does not exist, it is appended to the current working directory. Since
the return value of append_path() was ignored, and if the buffer length
was too small to fit getcwd() + dirname(filename), it would still try to
append the basename(filename).
This was manifesting as a failure in test/unit/path_spec.lua in:
itp('fails and uses filename if given filename contains non-existing directory', ..
This failure occurs when running the tests from directory with a short
path such as: /work/src/nv
test/unit/path_spec.lua:420: Expected objects to be the same.
Passed in:
(string) '/work/src/nv/test.file'
Expected:
(string) 'non_existing_dir/test.file'
This return value for the second call to append_path() to append
basename(filename) was checked, and this is where it would fail for
normal / longer getcwd()s.
This reverts commit 4382d2ed56.
The story for this feature was left in an incomplete state. It was never
the intention to unilaterally fold all information, only the ones that
did not contain relevant information. This feature does more harm than
good in its incomplete state.
Problem: POSIX function name in exarg struct causes issues
on OpenVMS
Solution: Rename getline member in exarg struct to ea_getline,
remove isinf() workaround for VMS
There are compilers that do not treat well POSIX functions - like
getline - usage in the structs.
Older VMS compilers could digest this... but the newer OpenVMS compilers
( like VSI C x86-64 X7.4-843 (GEM 50XB9) ) cannot deal with these
structs. This could be limited to getline() that is defined via
getdelim() and might not affect all POSIX functions in general - but
avoiding POSIX function names usage in the structs is a "safe side"
practice without compromising the functionality or the code readability.
The previous OpenVMS X86 port used a workaround limiting the compiler
capabilities using __CRTL_VER_OVERRIDE=80400000
In order to make the OpenVMS port future proof, this pull request
proposes a possible solution.
closes: vim/vim#137046fdb628082
Co-authored-by: Zoltan Arpadffy <zoltan.arpadffy@gmail.com>
LuaJIT does not handle -0.0 correctly in 'dual number mode' (which is
the default, and only supported mode for LuaJIT arm64). If LuaJIT is
forced to use 'dual number mode' on X64 (where the default is single),
this test will fail in the same manner.
Fix this by using tonumber("-0.0") instead of a -0.0 literal.
See: https://github.com/LuaJIT/LuaJIT/issues/858
Problem: filetype: some history files are not recognized
Solution: Add some history patterns to filetype.vim
(Wu, Zhenyu)
closes: vim/vim#14513da70feabea
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: xilinx files are not recognized
Solution: Add a few xilinx specific file patterns,
inspect lpr files for being xml/pascal
(Wu, Zhenyu)
closes: vim/vim#14454614691ceef
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: some TeX files are not recognized
Solution: Add more patterns for TeX files and inspect
a few more files for being TeX files
(Wu, Zhenyu)
closes: vim/vim#1445661ee833a50
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: overflow detection not accurate when adding digits
Solution: Use a helper function
Use a helper function to better detect overflows before adding integer
digits to a long or an integer variable respectively. Signal the
overflow to the caller function.
closes: vim/vim#1353922cbc8a4e1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Run the global before_each() before all other before_each(), so that
clear() uses the test ID of the current test, not the previous one.
Don't skip generating test IDs for skipped tests, as that'll make a
skipped test have the same test ID as the previous one.
runtime(vim): Improve Vim9 and legacy-script comment highlighting (vim/vim#13104)
This is a first-pass attempt to limit matching of Vim9 and legacy-script
comments to the appropriate syntactic contexts.
Vim9-script comments are highlighted at top level in a Vim9-script file,
in all :def functions, and in all :autocmd and :commmand command blocks.
Legacy-script comments are highlighted at top level in a legacy script
file, in all :func functions and in the Vim9-script preamble before the
:vim9script marker command.
Fixesvim/vim#13047, vim/vim#11307 and vim/vim#9587.
04e5363b82
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: Patch 9.1.0296 causes too many issues
(Tony Mechelynck, chdiza, CI)
Solution: Back out the change for now
Revert "patch 9.1.0296: regexp: engines do not handle case-folding well"
This reverts commit 7a27c108e0509f3255ebdcb6558e896c223e4d23 it causes
issues with syntax highlighting and breaks the FreeBSD and MacOS CI. It
needs more work.
fixes: vim/vim#14487c97f4d61cd
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: heredoc start may be recognized in string.
Solution: Don't skip to closing bracket for invalid list assignment.
(zeertzjq)
closes: vim/vim#144721817ccdb10
Problem: Missing test for what patch v9.1.0285 fixes
Solution: Add a test for cursor movement at buffer boundaries.
(Luuk van Baal)
aa8e22b035
vim-patch:9.1.0225: test_matchparen not run in CI
Problem: test_matchparen not run in CI
Solution: add test_matchparen.res to NEW_TESTS_RES in Makefile,
update changed highlighting dump from v9.1.61
059aeac2be
Changes N/A and test result was restored in patch 9.1.0258 (included in #28160).
Problem:
Decoration provider `on_line` handler is invoked for diff filler line
below the last buffer line. This does not match the documentation:
"called for each buffer line".
Solution:
Check `end_fill`.
To avoid repeatedly requesting a buffer multiple times before a request is completed, the current implementation puts the requested buffer into the active_refreshes table before requesting.
But since we only remove the buffer from active_refreshes in the lsp-handler of textDocument/codeLens, this will cause if the user sends a request that cannot trigger lsp-handler (for example, if there is an LSP server attached to the current buffer, and especially when the user creates an autocmd which performs vim.lsp.codelens.refresh after the BufEnter event is triggered like in the document example), this buffer will be put into active_refreshes, and there is no way to remove it, which will result in all subsequent vim.lsp.codelens.refresh not requesting textDocument/codeLens.
According to the LSP specification, the CodeLens.command is optional but the CodeLens.command.command is not optional, which means the correct representation of a display-only code lens is indeed one with a command with a title to display and an empty string as command.
Problem: when reconfig current float win without win key in nvim_win_set_config will cause float win position changed when move.
Solution: don't relative itself.
Problem: Regex engines do not handle case-folding well
Solution: Correctly calculate byte length of characters to skip
When the regexp engine compares two utf-8 codepoints case insensitively
it may match an adjacent character, because it assumes it can step over
as many bytes as the pattern contains.
This however is not necessarily true because of case-folding, a
multi-byte UTF-8 character can be considered equal to some single-byte
value.
Let's consider the pattern 'ſ' and the string 's'. When comparing and
ignoring case, the single character 's' matches, and since it matches
Vim will try to step over the match (by the amount of bytes of the
pattern), assuming that since it matches, the length of both strings is
the same.
However in that case, it should only step over the single byte
value 's' so by 1 byte and try to start matching after it again. So for the
backtracking engine we need to ensure:
- we try to match the correct length for the pattern and the text
- in case of a match, we step over it correctly
The same thing can happen for the NFA engine, when skipping to the next
character to test for a match. We are skipping over the regstart
pointer, however we do not consider the case that because of
case-folding we may need to adjust the number of bytes to skip over. So
this needs to be adjusted in find_match_text() as well.
A related issue turned out, when prog->match_text is actually empty. In
that case we should try to find the next match and skip this condition.
fixes: vim/vim#14294closes: vim/vim#144337a27c108e0
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(vim): Update base-syntax, no curly-brace names in Vim9 script (vim/vim#14466)
Remove curly-brace name matching for :def functions. This is not
supported in Vim9 script.
e43ace558a
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: Vim9: comment may be treated as heredoc start.
(Ernie Rael)
Solution: Use skip_var_list() instead of find_name_end().
(zeertzjq)
fixes: vim/vim#14444closes: vim/vim#144469a91d2b72c
Problem: plines_m_win() does not take into account it's "limit_winheight"
argument for filler lines below the last line of the buffer.
(after v9.1.0280)
Solution: Check window height when "limit_winheight" is TRUE.
(Luuk van Baal)
08b0f632c1
Problem: Wrong doc style for pandoc syntax description,
Test_diff_eob_halfpage() may fail depending on
screen size, using braces in highlight.c when
not necessary
Solution: Fix pandoc documentation, make sure the window
for the test has 7 lines, remove the braces.
a040019be6
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: R history files are not recognized
Solution: Detect '.Rhistory' files as r filetype
(Wu, Zhenyu)
closes: vim/vim#14440fc21b6437c
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: Some code lines not covered by tests.
Solution: Add a few more test cases. Fix getting more than one error for
invalid assignment.
8b716f5f22
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Logic to make sure cursor is in visible part of the screen after
scrolling the text with 'smoothscroll' is scattered, asymmetric
and contains bugs.
Solution: Adjust and create helper function for 'smoothscroll' cursor logic.
(Luuk van Baal)
9148ba8a46
Problem: "zb" does not reveal filler lines at the start of a buffer.
Scrolled cursor position with 'smoothscroll' is unpredictable,
and may reset skipcol later if it is not visible (after v9.1.258)
Solution: Replace confusing for loop that reaches final control value too
early with while loop. Set "w_curswant" accordingly so cursor
will be placed in visible part of topline.
(Luuk van Baal)
bd28cae1f1
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
cb204e688e
It's a combination of add_custom_target and add_custom_command that does
what most users probably expect should happen.
This also fixes `make clean` removing files tracked by git.
Problem: Autocommand may change currect directory after :tcd and :lcd.
Solution: Also clear tp_localdir and w_localdir when using aucmd_win.
(zeertzjq)
closes: vim/vim#144359d956ee8ea
runtime(doc): Normalise builtin-function optional parameter formatting
These should generally be formatted as func([{arg}]) and referenced as
{arg} in the description.
closes: vim/vim#144389cd9e759ab
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
This actually won't cause "duplicate tag" errors if plugins have tags of
the same name, because E154 is only given for duplicate tags in the same
directory.
Without those tags, trying to use :h for these mappings jumps to other
places, because there are matches with higher score.
Also close Nvim instance before removing log file, otherwise the Nvim
instance will still write to the log file.
Also adjust log level in libuv_process_spawn(). Ref #27660
Problem: Invalid assert for empty signcols range. The empty range
should already be removed from "b_signcols" at this point.
The "clear" == kTrue call before the splice that made the
range empty will have removed it, and the "clear" == kNone
call after the splice already ignores the empty range.
Solution: Return early when "row2" < "row1".
Now that Nvim always supports nanotime, sleeping for some milliseconds
is actually enough, but for test_stat.vim keeping some longer sleeps may
increase test coverage, so just match the upstream test.
Problem: Test for TextChanged is still flaky with ASAN.
Solution: Don't index the result of readfile().
(zeertzjq)
It turns out that with ASAN the file may become empty during a write
even if it's non-empty both before and after the write, in which case
indexing the result of readfile() will error, so use join() instead.
Also don't delete the file halfway the test, just in case it may cause
errors on the next read.
closes: vim/vim#14421e9ff79a7c9
Problem: Two tests in test_filechanged.vim are slow.
Solution: Sleep for shorter if the +nanotime feature is available.
(zeertzjq)
closes: vim/vim#1441883cd2c7bf0
Problem: File name entered in GUI dialog is ignored (after v9.1.0265)
Solution: Only set file name to "Untitled" if GUI dialog didn't set it.
(zeertzjq)
closes: vim/vim#14417c20bdf1107
runtime: fix :compiler leaving behind a g:makeprg variable (vim/vim#14414)
Problem: :compiler may leave behind a g:makeprg variable after vim/vim#14336.
Solution: Use a script local variable.
b73faa1c02
Also apply previously omitted change to compiler/context.vim.
Design
- Enable commenting support only through `gc` mappings for simplicity.
No ability to configure, no Lua module, no user commands. Yet.
- Overall implementation is a simplified version of 'mini.comment'
module of 'echasnovski/mini.nvim' adapted to be a better suit for
core. It basically means reducing code paths which use only specific
fixed set of plugin config.
All used options are default except `pad_comment_parts = false`. This
means that 'commentstring' option is used as is without forcing single
space inner padding.
As 'tpope/vim-commentary' was considered for inclusion earlier, here is
a quick summary of how this commit differs from it:
- **User-facing features**. Both implement similar user-facing mappings.
This commit does not include `gcu` which is essentially a `gcgc`.
There are no commands, events, or configuration in this commit.
- **Size**. Both have reasonably comparable number of lines of code,
while this commit has more comments in tricky areas.
- **Maintainability**. This commit has (purely subjectively) better
readability, tests, and Lua types.
- **Configurability**. This commit has no user configuration, while
'vim-commentary' has some (partially as a counter-measure to possibly
modifying 'commentstring' option).
- **Extra features**:
- This commit supports tree-sitter by computing `'commentstring'`
option under cursor, which can matter in presence of tree-sitter
injected languages.
- This commit comments blank lines while 'tpope/vim-commentary' does
not. At the same time, blank lines are not taken into account when
deciding the toggle action.
- This commit has much better speed on larger chunks of lines (like
above 1000). This is thanks to using `nvim_buf_set_lines()` to set
all new lines at once, and not with `vim.fn.setline()`.
runtime: Remove fallback :CompilerSet definition from compiler plugins
The :CompilerSet command was added in version Vim 6.4 which was released
twenty years ago. Other runtime files do not support versions of that
vintage so it is reasonable to remove this fallback command definition
now.
closes: vim/vim#14399408281e16a
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem:
Some servers don't report progress during initialize unless the client
sets the `workDoneToken`
See https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#initiatingWorkDoneProgress
In particular:
> There is no specific client capability signaling whether a client will
> send a progress token per request. The reason for this is that this is
> in many clients not a static aspect and might even change for every
> request instance for the same request type. So the capability is signal
> on every request instance by the presence of a workDoneToken property.
And:
> Servers can also initiate progress reporting using the
> window/workDoneProgress/create request. This is useful if the server
> needs to report progress outside of a request (for example the server
> needs to re-index a database). The token can then be used to report
> progress using the same notifications used as for client initiated
> progress.
So far progress report functionality was relying entirely on the latter.
Solution:
Set a `workDoneToken`
Closes https://github.com/neovim/neovim/issues/27938
Problem: console dialog cannot save unnamed buffers
Solution: set bufname before save (glepnir). Define dialog_con_gui
to test for GUI+Console dialog support, use it to skip
the test when the GUI feature has been defined.
Note: The dialog_changed() function will also try to call the
browse_save_fname() function, when FEAT_BROWSE is defined (which is only
defined in a GUI build of Vim). This will eventually lead to a call of
do_browse(), which causes an error message if a GUI is not currently
running (see the TODO: in do_browse()) and will then lead to a failure
in Test_goto_buf_with_onfirm().
Therefore, we must disable the Test_goto_buf_with_onfirm(), when the
dialog_con_gui feature is enabled (which basically means dialog feature
for GUI and Console builds, in contrast to the dialog_con and dialog_gui
feature).
(Previously this wasn't a problem, because the test aborted in the YES
case for the :confirm :b XgotoConf case and did therefore not run into
the browse function call)
closes: vim/vim#14398df46115fc8
Co-authored-by: glepnir <glephunter@gmail.com>
Ref #21393
- Move default user commands to _defaults.lua as that now contains all
kinds of defaults rather than just default mappings and menus.
- Remove the :aunmenu as there are no menus when _defaults.lua is run.
Problem: Dialog for file changed outside of Vim not tested.
Solution: Add a test. Move FileChangedShell test. Add 'L' flag to
feedkeys().
5e66b42aae
Co-authored-by: Bram Moolenaar <Bram@vim.org>
runtime(java): Improve the matching of contextual keywords
- Recognise a _record_ contextual keyword.
- Recognise _non-sealed_, _sealed_, and _permits_ contextual
keywords.
- Admit _$_ to keyword characters.
- Group _abstract_, _final_, _default_, _(non-)sealed_
(apart from _(non-)sealed_, the incompossibility of these
modifiers calls for attention).
- Remove another _synchronized_ keyword redefinition.
I have also replaced a function with an expression. Before
patch 8.1.0515, it should have been declared :function! to
work with repeatable script sourcing; there is less to worry
about with an expression.
References:
https://openjdk.org/jeps/395 (Records)
https://openjdk.org/jeps/409 (Sealed Classes)
https://docs.oracle.com/javase/specs/jls/se21/html/jls-3.html#jls-3.8closes: vim/vim#144035ccdcc482e
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: The usage of `_BitScanForward64` causes linking to fail on some systems.
Solution: Correctly check if it exists using `check_c_source_compiles`.
`exec_lua` makes code slighly harder to read, so it's beneficial to
remove it in cases where it's possible or convenient.
Not all `exec_lua` calls should be removed even if the test passes as it
changes the semantics of the test even if it happens to pass.
From https://github.com/neovim/neovim/pull/28155#discussion_r1548185779:
"Note for tests like this, which fundamentally are about conversion, you
end up changing what conversion you are testing. Even if the result
happens to be same (as they often are, as we like the rules to be
consistent if possible), you are now testing the RPC conversion rules
instead of the vim script to in-process lua conversion rules."
From https://github.com/neovim/neovim/pull/28155#discussion_r1548190152:
"A test like this specifies that the cursor is valid immediately and not
after a separate cycle of normal (or an other input-processing) mode."
Problem: Normal mode TextChanged isn't tested properly.
Solution: Combine Test_Changed_ChangedI() and Test_Changed_ChangedI_2()
and also run it on Windows. Fix a typo in main.c.
(zeertzjq)
closes: vim/vim#14396c422662933
Problem: filetype: typespec files are not recognized
Solution: Detect '*.tsp' files as typespec
(Hilmar Wiegand)
Specs is at https://typespec.io/closes: vim/vim#143926c9f4f98f1
Co-authored-by: Hilmar Wiegand <me@hwgnd.de>
Problem: Typing "interrupt" at debug prompt may keep exception around,
causing function calls to fail.
Solution: Discard any exception at the toplevel. (closesvim/vim#9532)
069613c9e8
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: [security]: Heap buffer overflow when calling complete_add()
in the first call of 'completefunc'
Solution: Call check_cursor() after calling 'completefunc' (zeertzjq)
closes: vim/vim#143910a419e07a7
Problem: Adding a character for incsearch fails at end of line.
Solution: Only check cursor line number.
d4566c14e7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
We start at 100 so we can make the base set larger if needed. (It might need to
grow/shrink as a result of adopting the new default color scheme as the
default for tests)
Usage best illustrataded by example.
Improving the workflow for making new tests with `screen:snapshot_util()` will
be a follow up.
Problem: Injecting languages for file redirects (e.g., in bash) is not
possible.
Solution: Add `@injection.filename` capture that is piped through
`vim.filetype.match({ filename = node_text })`; the resulting filetype
(if not `nil`) is then resolved as a language (either directly or
through the list maintained via `vim.treesitter.language.register()`).
Note: `@injection.filename` is a non-standard capture introduced by
Helix; having two editors implement it makes it likely to be upstreamed.
Problem: Attempting to set 'noautocmd' for an existing window throws an error
that just says "Invalid key: 'noautocmd'" which is not very helpful.
Solution: Explain that 'noautocmd' can't be used with existing windows.
runtime(yaml): improve syntax highlighting for YAML
- Recognize block scalar style to avoid unexpected highlighting by `yamlFlowString` (fixvim/vim#11517)
- Improve performance of `yamlFlowMappingKey` by allowing execution by the NFA engine (fixvim/vim#10730)
- It was intentionally disabled before patterns were optimized by `s:SimplifyToAssumeAllPrintable`.
- Fix detection of flow style mapping indicators (fixvim/vim#8234).
- Enable highlighting of explicit mapping value indicators and node properties in flow style.
- Add syntax highlighting tests
closes: vim/vim#14354cc7597c1ed
Co-authored-by: itchyny <itchyny@cybozu.co.jp>
Problem: Filetype test fails.
Solution: Move detection by name before detection by extension.
Improve TextChanged test and remove wrong test and fix
a typo in a comment (zeertzjq).
closes: vim/vim#143738eb7523802
The changes to filetype.vim are N/A since Nvim always prefers filename
matches to extension matches.
Problem: Filetype detection fails if file name ends in many '~'.
Solution: Strip multiple '~' at the same time. (closesvim/vim#12553)
c12e4eecbb
In Nvim this already works as Lua filetype detection isn't subject to
such a small recursion limit as autocommands, but it still makes sense
to avoid unnecessary recursion.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: filetype: rock_manifest and config.ld files are not recognized
Solution: Detect 'rock_manifest' and 'config.ld' as lua
(Wu, Zhenyu)
closes: vim/vim#14370a917bd58bd
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: fontconfig files are not recognized
Solution: detect 'fonts.conf' as xml
(Wu, Zhenyu)
closes: vim/vim#14367a2c27b01dc
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: zsh theme, history and zunit files are not
recognized.
Solution: Detect '.zsh_history', '*.zsh-theme' and '*.zunit' as zsh
(Wu, Zhenyu)
closes: vim/vim#14366a55a22a1a3
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: bash history files are not recognized
Solution: detect .bash-history and .bash_history files as bash
(Wu, Zhenyu)
closes: vim/vim#1436584ce55001a
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: netrw history file is not recognized
Solution: Detect .netrwhist as vim files (Wu, Zhenyu)
closes: vim/vim#14364abbb4a4f70
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: mysql history files are not recognized
Solution: Detect .mysql_history as mysql
(Wu, Zhenyu)
closes: vim/vim#143626b285c8cfd
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
runtime(compilers): ensure compiler! sets global options (vim/vim#14336)
Previously some options were only set locally by
&l:makeprg/errorformat
This suffices for :compiler (without a trailing bang)
but falls short for :compiler! that sets &g:makeprg/errorformat as
well
Also apply kind suggestions by @dkearns and @lifepillar
18d730d7b5
omit context.vim (vim9script only)
Co-authored-by: Enno <Konfekt@users.noreply.github.com>
Problem: Conceal test fails when rightleft feature is disabled.
Solution: Skip test if rightleft feature is missing (Julio B).
closes: vim/vim#143425df961a1bc
Co-authored-by: Julio B <julio.bacel@gmail.com>
Problem: Filetype may be undetected when a SwapExists autocommand sets
filetype in another buffer.
Solution: Make filetype detection state buffer-specific. Also fix a
similar problem for 'modified' (zeertzjq).
closes: vim/vim#143445bf6c2117f
Problem: TextChanged autocommand not triggered under some circumstances
(Sergey Vlasov)
Solution: Trigger TextChanged when TextChangedI has not been triggered
fixes: vim/vim#14332closes: vim/vim#143398603270293
Co-authored-by: Christian Brabandt <cb@256bit.org>
The `callHierarchy` function should warn the user when
`textDocument/prepareCallHierarchy` didn't resolve an entity and
return, rather than calling the `callHierarchy/{incoming,outgoing}Calls`
method with an empty object - which is encoded as an empty list (which
doesn't respect language server specification for the
`callHierarchy/incomingCalls` call).
Backslashes are valid characters in unix style paths.
Fix the conversion of backslashes to forward slashes in several `vim.fs`
functions when not on Windows. On Windows, backslashes will still be converted
to forward slashes.
Python 3.12+ throws an error if you try to install a package in an
externally managed environment. Using `--break-system-packages` is not
recommended for personal use, but for CI it should be fine and is
probably the most straightforward solution.
Problem: Recording may still be wrong in Select mode (after 8.2.3993).
Solution: Make sure a character isn't split between two buffer blocks.
(zeertzjq)
closes: vim/vim#14326ea95f1a5ad
Problem: Two unrelated things are tested by a single test.
Solution: Split it into two, restoring the old Test_brace_single_line().
Add missing cleanup to some tests.
(zeertzjq)
closes: vim/vim#14323ad493ef3ea
Problem: Current behavior of stateful intro message is too persistent.
For example, it is still drawn if new empty buffer is shown in current
window (either by explicitly setting it or after `tabnew`). Although
the buffer is empty, the act of it being shown should be made visible.
Solution: Make intro message persist if all is true:
- Current buffer is the same as it was just after start, i.e. empty
nameless with initial handle (i.e. 1).
- Current window is the same as it was just after start, i.e. single
non-floating with initial handle.
Problem: using win_viewport for implementing smooth scrolling in an external
UI might run into problems when winbar or borders is used, as there is
no indication that the entire grid is not used for scrolled buffer text.
Solution: add `win_viewport_margins` event.
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
5a2e3ec9ac
Problem: Unnecessary multiplications in backspace code, as
"col / ts * ts" is the same as "col - col % ts".
Solution: Change "col / ts * ts" to "col - col % ts". Adjust the loop
and the comments ins_bs() to be easier to understand. Update
tests to reset 'smarttab' properly.
(zeertzjq)
closes: vim/vim#143088ede7a0694
Problem: regexp: verymagic cannot match before/after a mark
Solution: Correctly check for the very magic check (Julio B)
Fix regexp parser for \v%>'m and \v%<'m
Currently \v%'m works fine, but it is unable to match before or after
the position of mark m.
closes: vim/vim#1430946fa3c7e27
Co-authored-by: Julio B <julio.bacel@gmail.com>
Problem: CI: MS-Windows fails in test_winfixbuf
(after v9.1.208)
Solution: Instead of skipping the test, write the file
so it exists on disk, to verify that MS-Windows
short filename expansion is successful.
(Sean Dewar)
related: vim/vim#14286aed6554b46
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Error on exit with EXITFREE and 'winfixbuf'.
Solution: Handle DT_FREE before checking for 'winfixbuf'.
(zeertzjq)
closes: vim/vim#14314620e85265c
Problem: Page-wise scrolling with Ctrl-F/Ctrl-B implements
it's own logic to change the topline and cursor.
In doing so, skipcol is not handled properly for
'smoothscroll', and virtual lines.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y while staying
backward compatible as much as possible.
b9f5b95b7b
Problem: winfixbuf does not allow to re-edit current buffer
(Tim Pope, after v9.1.0147)
Solution: Explicitly allow :e even when 'winfixbuf' is set,
since it just re-loads the current buffer
(Colin Kennedy)
fixes: vim/vim#14237closes: vim/vim#1428665e580bd56
- Group functions for key encoding together.
- Move the handle_modereport() branch before the handle_unknown_csi()
branch to match the order of the corresponding functions, but don't
move handle_term_response() yet, as that will be subject to further
changes (e.g. for #26744).
Problem: Currently, the `immutable` property of options can be applied for options that are hidden and options whose value simply can't be changed. Which is problematic when attempting to convert an option like `'maxcombine'` into an immutable option, because trying to `:set` an immutable option currently gives an error, which is only desired behavior for hidden options, not options that are actually immutable.
Solution: Separate the `immutable` property into two distinct `hidden` and `immutable` properties. Change all options with the `immutable` property to use the `hidden` property instead. Also add `p_mco` as an `immutable` option, as its value cannot be changed, and the underlying variable is not used anywhere.
Problem:
LSP basic_finish test modified in #27899 is flaky again after #28030.
Solution:
Run on_setup() immediately after setup using a before_init callback.
Use pattern matching instead, as fnamemodify() with :e produces an empty
string when the file name only has an extension, leading to differences
in behavior from Vim.
Related #16955#27972
Problem: Cannot use modifiers before :-Ntabmove.
Solution: Check backwards from the command instead of checking from the
start of the command line. Slightly adjust docs to make them
more consistent (zeertzjq).
closes: vim/vim#14289076faac537
runtime(java): Recognise the inline kind of the {@return} tag (vim/vim#14284)
Also:
- Refine comment matching (javaComment{Error\ and,Start}).
- Continue rewriting regexps (prefer atom grouping with
non-capturing parens; factor out common prefixes in
alternations).
- Allow for relative paths with the _file_ attribute of
{@snippet}.
- Anticipate HTML in the @see tags.
- Match the nullary method parens in javaDocSeeTagParam.
- Improve the boundary patterns for summary sentences of
documentation.
> This sentence ends at ... or at the first tag (as defined
> below).
There are Java documentation tags (@) and there are HTML
tags (<?>) (with Markdown looming large; see JEP 467). With
block tags, e.g. @param, @return, @see, we begin another
documentation "sentence" whether or not the author has
terminated the summary sentence with a period; with
.<!-- -->, we may follow abbreviations, enumerations,
initials, (but instead consider @literal or ) _within_
the summary sentence. On the other hand, inline tags, e.g.
@code, @link, @literal, should not terminate the summary
sentence.
References:
https://bugs.openjdk.org/browse/JDK-8075778https://www.oracle.com/technical-resources/articles/java/javadoc-tool.html#firstsentencehttps://docs.oracle.com/en/java/javase/21/docs/specs/javadoc/doc-comment-spec.html8e59a7ba88
Co-authored-by: Aliaksei Budavei <32549825+zzzyxwvut@users.noreply.github.com>
runtime(java): Recognise the {@snippet} documentation tag (vim/vim#14271)
Remember that ‘code fragments are typically Java source
code, but they may also be fragments of properties files,
source code in other languages, or plain text.’ Therefore,
with these changes, markup tags are highlighted in the Java
source files (as external snippets) and in the {@snippet}
tags.
Also:
- Improve matching of the multi-line {@code} documentation
tag with any contained balanced braces.
- Recognise the {@literal} documentation tag.
- Highlight stray blanks in comments.
Related to an enhancement proposal for PCRE-like callouts
discussed at https://github.com/vim/vim/issues/11217.
References:
https://openjdk.org/jeps/413https://docs.oracle.com/en/java/javase/21/docs/specs/javadoc/doc-comment-spec.html3e72bf10a0
Co-authored-by: Aliaksei Budavei <32549825+zzzyxwvut@users.noreply.github.com>
Problem: E1509 when writing extended attributes to a symlink.
Solution: Copy the file before copying extended attributes.
On Fedora, the attribute being set is "security.selinux". For normal,
non-symlink files this attribute doesn't show up and that's why calling
os_copy_xattr() doesn't break in that case.
Move test cases that are more about treesitter query API rather than
parser API or LanguageTree out of "treesitter/parser_spec", and collect
them in another test suite "treesitter/query_spec".
runtime(termdebug): allow multibyte characters as breakpoint signs (vim/vim#14274)
Allow multibyte characters as termdebug signs using slice() function
d3c0ff5d5a
Co-authored-by: Mihai Ciuraru <mihai.ciuraru@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
General refactoring, including:
- Improve whitespace and indentation
- Prefix captures with `@`
- Add more comments on `iter_capture()` tests
- Move `test_query` up closer to the fixture source string
No behavioral changes are made.
This is the first installment of a multi-PR series significantly
refactoring how highlights are being specified.
The end goal is to have a base set of 20 ish most common highlights,
and then specific files only need to add more groups to that as needed.
As a complicating factor, we also want to migrate to the new default
color scheme eventually. But by sharing a base set, that future PR
will hopefully be a lot smaller since a lot of tests will be migrated
just simply by updating the base set in place.
As a first step, fix the anti-pattern than Screen defaults to ignoring
highlights. Highlights are integral part of the screen state, not
something "extra" which we only test "sometimes". For now, we still
allow opt-out via the intentionally ugly
screen._default_attr_ids = nil
The end goal is to get rid of all of these eventually (which will be
easier as part of the color scheme migration)
`GIT_REPOSITORY` will cause cmake to rebuild if local dependency
changes, which isn't the case for `URL`.
Also document how to test a different commits of a dependency.
Problem: Not enough tests for the slice() function.
Solution: Test with multibyte chars, and in both Legacy and Vim9 script.
Update docs to be clearer about how it treats composing chars.
(zeertzjq)
closes: vim/vim#14275ad38769030
When the edited file is a symlink, the unexpanded file name is needed to
to achieve the same behavior as the autocommand pattern matching in Vim.
Neither args.file nor args.match are guaranteed to be unexpanded, so use
bufname() instead.
Problem: Vim9: string index and slice does not include composing chars.
Solution: Include composing characters. (issue vim/vim#6563)
0289a093a4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: string and list index work differently.
Solution: Make string index work like list index. (closesvim/vim#7643)
e7525c5520
Co-authored-by: Bram Moolenaar <Bram@vim.org>
runtime(vim): Update base-syntax, remove old unused syntax groups. (vim/vim#14146)
Remove old unused syntax groups.
- vimRegion, vimPattern and vimKeyword removed in Vim 5.3.
- vimAuSyntax, vimAutoCmdOpt, vimAutoSet and vimStatement removed in 5.6.
The following were linked in :hi commands but never defined with :syn
and, most likely, never used:
- vimHLMod introduced in 5.0.
- vimKeycode and vimKeycodeError introduced in 5.4.
- vimElseif introduced in 5.6.
- vimFold introduced in 6.4.
- vimOperStar (and vimoperStar) introduced in 9.0.
76d62985c1
Co-authored-by: dkearns <dougkearns@gmail.com>
runtime(vim): Update base-syntax, improve function definition highlighting (vim/vim#14203)
Improve function definition highlighting.
- Match bang and function modifiers - abort etc.
- Only match valid scope modifiers.
- Match listing commands.
- Don't match ex commands in function names.
- Split function syntax groups into :func and :def subgroups.
- Match Vim9-script parameter and return types.
- Limit legacy-script and Vim9-script comments to :func and :def
definitions, respectively.
35e6f4ca27
Omit the vimFunctionError change as it's a whitespace-only change and
will likely be superseded by later patches.
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: memleak with ex_drop(), NULL dereference
(zeertzjq)
Solution: revert back to ex_rewind(), use curbuf instead of buf
fixes: vim/vim#14246closes: vim/vim#1425185a769d466
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: :drop tries to :rewind the argumentlist, which results in E37
(after v9.1.0046)
Solution: instead of calling ex_rewind(), call open_buffer() only when
re-using the initial empty buffer
fixes: vim/vim#14219closes: vim/vim#14220978178823b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: gcc complains about uninitialized var
(Tony Mechelynck)
Solution: initialize to NULL
9eb236f455
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: `xctz()` uses a fallback algorithm for MSVC, even though a compiler builtin exists.
Solution: Make `xctz()` use the compiler builtin for MSVC compiler.
Problem: `set_string_option_direct()` contains a separate codepath specifically for setting string options. Not only is that unnecessary code duplication, but it's also limited to only string options.
Solution: Replace `set_string_option_direct()` with `set_option_direct()` which calls `set_option()` under the hood. This reduces code duplication and allows directly setting an option of any type.
Problem: Description of highlight groups for LSP semantic tokens can be
more up to date and useful.
Right now it misses several actually defined highlight groups and
presents information about Vim highlight groups they are linked to.
This is both outdated (they link to tree-sitter `@` groups now) and
redundant (users can see this information with `:Inspect` over the
group name itself).
Solution: Synchronize the list of groups with specification and provide
actionable descriptions.
Problem: complete_info() returns wrong order of items
(after v9.0.2018)
Solution: Revert Patch v9.0.2018
(Girish Palya)
bug fix: complete_info() gives wrong results
1) complete_info() reverses list of items during <c-p>
2) 'selected' item index is wrong during <c-p>
3) number of items returnd can be wrong
Solution:
- Decouple 'cp_number' from 'selected' index since they need not be
correlated
- Do not iterate the list backwards
- Add targeted tests
Regression introduced by 69fb5afb3b
Following are unnecessary commits to patch problems from above:
fef6630166daef8c7437
All the tests from above commits are retained though.
fixes: vim/vim#14204closes: vim/vim#142418950bf7f8b
Remove EMPTY_IF_NULL() as it has been unnecessary since #12673.
Co-authored-by: Girish Palya <girishji@gmail.com>
runtime(deb822sources): Add minimal ftplugin (vim/vim#14240)
Set comment related options and avoid automatic line wrapping.
2708c0b585
Co-authored-by: James McCoy <jamessan@jamessan.com>
runtime(vim): Update base-syntax, disallow '.' at start of menu item names (vim/vim#14232)
Disallow '.' at the start of a menu item name.
This is the menu path separator character and should be escaped with a
'\' in this case.
Partially fixesvim/vim#14230. "popup" is still incorrectly matched as the Ex
command.
ec21bafc13
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: assertion failure in nvim_create_buf if buflist_new autocommands open
a swapfile when "scratch" is set.
Solution: block autocommands when setting up the buffer; fire them later
instead.
Note that, unlike buflist_new, I don't check if autocommands aborted script
processing; the buffer is already created and configured at that point, so might
as well return the handle anyway.
Rather than repeat try_{start,end} and {un}block_autocmds for each relevant
operation, just do it at the start and near the end. This means that, if
TermResponse fires from unblock_autocmds for whatever reason, it can see the
buffer in an already configured state if we didn't bail due to an error (plus
it's probably a bit cleaner this way).
Problem:
`TSNode:_rawquery()` is complicated, has known issues and the Lua and
C code is awkwardly coupled (see logic with `active`).
Solution:
- Add `TSQueryCursor` and `TSQueryMatch` bindings.
- Replace `TSNode:_rawquery()` with `TSQueryCursor:next_capture()` and `TSQueryCursor:next_match()`
- Do more stuff in Lua
- API for `Query:iter_captures()` and `Query:iter_matches()` remains the same.
- `treesitter.c` no longer contains any logic related to predicates.
- Add `match_limit` option to `iter_matches()`. Default is still 256.
Problem: Not all standard treesitter groups are documented.
Solution: Document them all (without relying on fallback); add default
link for new `*.builtin` groups to `Special` and `@keyword.type` to
`Structure`. Remove `@markup.environment.*` which only made sense for
LaTeX.
This will reduce friction as developers no longer need to provide a hash
when testing out different commits.
To skip the hash check, set `DEPS_IGNORE_SHA` to `TRUE` in
`cmake.deps/CMakeLists.txt`.
The first describe() block enters terminal mode in before_each(), so
feed_command() at the start of a test case writes it to the terminal
instead of executing it.
runtime(doc): Recover some missed commas and periods in starting.txt
Also:
- Insert some missing words;
- Strive for consistency with capitalisation of words;
- Improve shell alias examples.
The gvim words were left alone for now, but they deserve to
be treated like proper names, GVim or GUI Vim, unless these
refer to executable filenames (on *nix systems).
closes: vim/vim#1419478c189837a
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
runtime(vim): Update base-syntax, improve :highlight command (vim/vim#14228)
Improve :highlight command highlighting
- Use the same highlight groups for "default link" with and without
bang.
- Match some common line-continuation use.
- Match :hi clear variants.
- Highlight color-name values.
Resync vim.vim and generator/vim.vim.base.
9530fe4f3a
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem:
As mentioned in #23002 on_setup and on_init are run concurrently.
However, in basic_finish tests on_setup must attach the client before
on_init finishes. The other basic_finish test isn't flaky because it
makes an RPC request in on_init.
Solution:
Don't use on_setup in basic_finish tests.
Problem: "NOTE"s, inline Vim script code, and links ending in digits may not be
highlighted correctly within the :Tutor.
Solution: set an explicit value for ":syntax iskeyword" that includes digits. Do
it after ":syntax include"s, so the included syntax/sh.vim doesn't mess with the
value.
Increase screen test width so all text within the conclusion section is visible.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
After #25470 the `s` pointer is advanced before calling store_sb_text()
when a newline character is found, and store_sb_text() sets `sb_str` to
`s`, so it's not possible for `s == sb_str + 1` and `*sb_str == '\n'` to
be satisfied at the same time.
runtime(go): `goPackageComment` highlighting too broad
Previously this would highlight any comment before a line starting
`package`, for example
var (
// This comment would be highlighted as a goPackageComment
packages []string
)
The package clause is only valid when followed by a space[1], so include
this restriction
This is upstreaming a change from `go-vim`[2]
[1] https://go.dev/ref/spec#Package_clause
[2] d1c36cc4173d46de703c
Co-authored-by: Matthew Hughes <matthewhughes934@gmail.com>
Problem: Wrong cursor position when clicking after end of line with
'rightleft', 'virtualedit' and conceal.
Solution: Set values in ScreenCols[] also with SLF_RIGHTLEFT. Also fix
off-by-one cursor position with 'colorcolumn' (zeertzjq).
closes: vim/vim#14218deb2204bff
Problem: Wrong cursor position when clicking after end of line with
'virtualedit', conceal and virtual text.
Solution: Always fill linebuf_vcol[] for the columns to clear.
There is no test for using 'cursorline' in Normal mode in a terminal
buffer, so add a test and fix 'cursorcolumn' remaining when entering
Terminal mode.
Also move synIDattr() tests to ui/highlight_spec.lua.
Problem: Cursor line is unconcealed when pressing 'r' in Normal mode
when 'concealcursor' contains 'n' but not 'i'.
Solution: Don't check conceal when pressing 'r' in Normal mode.
Vim doesn't have this problem because it doesn't call redrawWinline() in
conceal_check_cursor_line() and instead sets a global variable.
Problem: Cursor position wrong when clicking with conceal and wrap.
Solution: Use the virtual column of the last char for ScreenCols[] in
boguscols. Remove use of MAXCOL in ScreenCols[]. Rename
third argument of wlv_screen_line() to "clear_end" as that's
clearer what it does (zeertzjq).
related: 14192
closes: vim/vim#14200d0c1b7723f
Rename win_put_linebuf() to wlv_put_linebuf().
`github.ref` is now defined for both pull requests and pushes, meaning
that it can be used to simplify the concurrency group.
`cancel-in-progress` is set to true only if the trigger is a pull
request, as we don't want master runs to cancel each other out.
Added the following LSP semantic token types to be linked to highlight
groups by default:
* @lsp.type.event
* @lsp.type.keyword
* @lsp.type.modifier
* @lsp.type.number
* @lsp.type.operator
* @lsp.type.regexp
* @lsp.type.string
Problem: Can define function with invalid name inside 'formatexpr'.
Solution: Use goto instead of checking for did_emsg later.
(zeertzjq)
closes: vim/vim#142096a04bf5ee5
Problem: Wrong display or screenpos() result when toggling diff mode.
Solution: Reset w_skipcol when disabling 'wrap'. Reset w_leftcol when
enabling 'wrap' (zeertzjq).
fixes: vim/vim#14210closes: vim/vim#142119e7f1fc2f1
Problem: Vim9: no error if a function shadows a script variable.
Solution: Check the function doesn't shadow a variable. (closesvim/vim#9310)
052ff291d7
Omit EVAL_VAR_NO_FUNC: Vim9 script only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
runtime(vim): Update base-syntax, improve :echo and :execute highlighting (vim/vim#14199)
Improve :echo and :execute highlighting.
- Add better line-continuation support for both commands.
- Improve the :execute command's expression argument matching.
- Remove the fix for issue vim/vim#9987 as this is now handled by correctly
matching the parens in :echo (...) as operator parens.
61887b3d6f
Co-authored-by: dkearns <dougkearns@gmail.com>
As this message is literally drawn on top of the EOB area of the first
window, the simple solution is to just draw the message on top of the
grid of the first window.
We still want #24764 (msg_intro event) but now only for ext_messages.
Problem: The ext_cmdline cursor position on the screen seems to rely on
an implicit assumption that the event listener implements a
cmdline window that is made the current window which is
problematic (e.g. breaks 'incsearch' in the actual current
window).
Solution: Remove this assumption and allow nvim_win_set_cursor() to move
the cursor on the screen to a non-current window (previous
commit).
Problem: Cursor position set by nvim_win_set_cursor() is not reflected
on the screen when followed by a blocking call like getchar().
Solution: Immediately update the cursor position on the grid.
Problem: no overflow check for string formatting
Solution: Check message formatting function for overflow.
(Chris van Willegen)
closes: vim/vim#13799c35fc03dbd
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: Cursor pos wrong when double-width chars are concealed.
Solution: Advance one more virtual column for a double-width char.
Run some tests with both 'wrap' and 'nowrap' (zeertzjq).
closes: vim/vim#14197010e1539d6
Problem:
CursorColumn highlight behavior is inconsistent with 'virtualedit' set:
- If cursor is on the text, CursorColumn is not shown.
- If cursor is after end of line, CursorColumn is shown.
Solution:
Don't shown CursorColumn on current line if cursor is after end of line.
Vim doesn't have this problem because in most cases it uses the code
path for drawing buffer text when CursorColumn highlight is needed.
Instead of randomly disappearing because some random event might have
caused mid_start or bot_scroll_start to randomly take a low value, treat
intro message as a _first class stateful_ thing.
This means that intro message will kept being _redrawn_ as long as we
are in the state it should be shown. This also includes screen resizes.
you will not lose the intro message because there was a delay in
detecting terminal features.
runtime(mswin): still another clipboard_working test
Commit 760f664213dea9a300454992ba1589f4601d622f missed to revert back
another test for `if has('clipboard_working')`
So change the remaining check around the inoremap <c-v> mappings.
fixesvim/vim#1419545da32964d
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(mswin): revert back the check for clipboard_working support
Commit d9ebd46bd090c598adc82e6 changed the condition to
check if the clipboard is available from:
```
has('clipboard')
```
to
```
has('clipboard_working')
```
Assuming that is the more accurate test because even when clipboard
support is enabled at compile time it may not be actually working (e.g.
if no X11 environment is available, or when working on a remote server).
However it seems that condition does not evaluate to true, when the GUI
has not been started up yet (and there was no X11 Connection yet possible).
So let's just revert back the check to `has('clipboard')`, since that
has been proven to be working well enough.
related: vim/vim#13809760f664213
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity reports dead code.
Solution: Remove the dead code. Also fix a mistake in ml_get_pos_len()
and update some comments (zeertzjq).
closes: vim/vim#141898c55d60658
Problem: More code can use ml_get_buf_len() instead of STRLEN().
Solution: Change more STRLEN() calls to ml_get_buf_len(). Also do not
set ml_line_textlen in ml_replace_len() if "has_props" is set,
because "len_arg" also includes the size of text properties in
that case. (zeertzjq)
closes: vim/vim#1418394b7c3233e
Problem: Text properties position wrong after shifting text.
Solution: Adjust the text properties when shifting a block of text.
(closesvim/vim#10418)
4b93674159
Most of the patch is already merged. Add an assertion in place of "added".
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Cursor column wrong with 'virtualedit' and conceal.
Solution: Correct cursor column at end of line if never reached.
(zeertzjq)
closes: vim/vim#14190253ff4dece
Problem: 'cursorline' and 'wincolor' highlight missing with concealed and
wrapped lines.
Solution: Apply 'cursorline' and 'wincolor' highlight to boguscols.
(zeertzjq)
Since 'cursorline' and 'wincolor' highlight apply after the end of the
line, it is more consistent to have them also apply to boguscols.
Assigning MAXCOL to values in ScreenCols[] make mouse click behave the
same with 'cursorline' and 'nocursorline', but such behavior may be
incorrect, as it puts the cursor on the next screen line. That may be
fixed in a future PR.
closes: vim/vim#1419221b0a3df8c
Problem: E1513 might be confusing
(Christoph Thoma)
Solution: reword error message, fix test to not
depend on the actual message
fixes: vim/vim#141890a32b8854b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: winframe functions incorrectly recompute window positions if
the altframe wasn't adjacent to the closed frame, which is
possible if adjacent windows had 'winfix{width,height}' set.
Solution: recompute for windows within the parent of the altframe and
closed frame. Skip this (as before) if the altframe was
top/left, but only if adjacent to the closed frame, as
positions won't change in that case. Also correct the return
value documentation for win_screenpos. (Sean Dewar)
The issue revealed itself after removing the win_comp_pos call below
winframe_restore in win_splitmove. Similarly, wrong positions could result from
windows closed in other tabpages, as win_free_mem uses winframe_remove (at least
until it is entered later, where enter_tabpage calls win_comp_pos).
NOTE: As win_comp_pos handles only curtab, it's possible via other means for
positions in non-current tabpages to be wrong (e.g: after changing 'laststatus',
'showtabline', etc.). Given enter_tabpage recomputes it, maybe it's intentional
as an optimization? Should probably be documented in win_screenpos then, but I
won't address that here.
closes: vim/vim#14191
Nvim: don't reuse "wp" for "topleft" in winframe_remove, so the change
integrates better with the call to winframe_find_altwin before it.
5866bc3a0f
A lot of functions in move.c only worked for curwin, alternatively
took a `wp` arg but still only work if that happens to be curwin.
Refactor those that are needed for update_topline(wp) to work
for any window.
fixes#27723fixes#27720
Problem: small improvements can be made to split-move related
functions.
Solution: apply them (Sean Dewar):
Some of these changes were already applied to Nvim.
Here are the ones which were missing:
- Improve some doc comments (frame_flatten should still work for non-current
tabpages, despite the topframe check, which looks benign, though I'm unsure if
it's still needed; see vim/vim#2467).
- f_win_splitmove should check_split_disallowed on wp, not targetwin, as that's
what win_splitmove checks (though it's probably unnecessary to check
b_locked_split at all; see vim/vim#14109, which I hope to get around to
finishing at some point).
- Apply the winframe_restore comment changes, and remove win_comp_pos from after
winframe_restore in win_splitmove, as it shouldn't be necessary (no need to
remove it from nvim_win_set_config too, as it was already omitted).
Move win_append after winframe_restore in win_splitmove to match Vim.
closes: vim/vim#141855cac1a9bee
Problem: more places exist where curwin == prevwin, and it may even be
expected in some cases.
Solution: revert v9.1.0001, but document that it's possible instead.
(Sean Dewar)
I've had a change of heart for the following reasons:
- A quick 'n dirty [GitHub code search](https://github.com/search?q=%2F%28winnr%5C%28%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%7Cwinnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5C%29%29%2F&type=code)
reveals some cases where it's expected in the wild.
Particularly, it made me aware `winnr() == winnr('#')` is possible when curwin
is changed temporarily during the evaluation of a &statusline expression item
(`%{...}`), and is used to show something different on the statusline
belonging to the previous window; that behaviour wasn't changed in v9.1.0001,
but it means curwin == prevwin makes sense in some cases.
- The definition and call sites of back_to_prevwin imply some expectation that
prevwin == wp (== curwin) is possible, as it's used to skip entering the
prevwin in that case.
- Prior to v9.1.0001, `:wincmd p` would not beep in the case that was patched in
v9.1.0001, but now does. That resulted in vim/vim#14047 being opened, as it affected
the CtrlP plugin.
I find it odd that `:wincmd p` had cases where it wouldn't beep despite doing
nothing, but it may be preferable to keep things that way (or instead also
beep if curwin == prevwin, if that's preferred).
- After more digging, I found cases in win_free_mem, enter_tabpage,
aucmd_restbuf and qf_open_new_cwindow where curwin == prevwin is possible
(many of them from autocommands). Others probably exist too, especially in
places where curwin is changed temporarily.
fixes: vim/vim#14047closes: vim/vim#14186d64801e913
Using -1 as the initial value can cause the pattern offset to become
negative, which in turn results in a negative subpriority, which fails
validation in nvim_buf_set_extmark.
Problem: current window number returned by tabpagewinnr may be outdated
when called from win_execute for the original tabpage.
Solution: update the original tabpage's tp_curwin in switch_win; use
{un}use_tabpage instead. Don't do it in restore_win to ensure
tp_curwin of the temporarily visited tabpage is unchanged from
switch_win visiting it, as before. (Sean Dewar)
Maybe restore_win should only restore tp_curwin if
`curtab == switchwin->sw_curtab`, in case the user changed tabpages from within
win_execute, but not doing that is consistent with the old behaviour.
related: vim/vim#14186e101028a5c
Current uses of vim_strup() calls memcpy()/strcpy() before calling vim_strup().
This results in 2 * strlen(string) operations.
We can trivially convert to lowercase while copying the string instead.
Tree-sitter queries can add URLs to a capture using the `#set!`
directive, e.g.
(inline_link
(link_text) @text.reference
(link_destination) @text.uri
(#set! @text.reference "url" @text.uri))
The pattern above is included by default in the `markdown_inline`
highlight query so that users with supporting terminals will see
hyperlinks. For now, this creates a hyperlink for *all* Markdown URLs of
the pattern [link text](link url), even if `link url` does not contain
a valid protocol (e.g. if `link url` is a path to a file). We may wish to
change this in the future to only linkify when the URL has a valid
protocol scheme, but for now we delegate handling this to the terminal
emulator.
In order to support directives which reference other nodes, the
highlighter must be updated to use `iter_matches` rather than
`iter_captures`. The former provides the `match` table which maps
capture IDs to nodes. However, this has its own challenges:
- `iter_matches` does not guarantee the order in which patterns are
iterated matches the order in the query file. So we must enforce
ordering manually using "subpriorities" (#27131). The pattern index of
each match dictates the extmark's subpriority.
- When injections are used, the highlighter contains multiple trees. The
pattern indices of each tree must be offset relative to the maximum
pattern index from all previous trees to ensure that extmarks appear
in the correct order.
- The `iter_captures` implementation currently has a bug where the
"match" table is only returned for the first capture within a pattern
(see #27274). This bug means that `#set!` directives in a query
apply only to the first capture within a pattern. Unfortunately, many
queries in the wild have come to depend on this behavior.
`iter_matches` does not share this flaw, so switching to
`iter_matches` exposed bugs in existing highlight queries. These
queries have been updated in this repo, but may still need to be
updated by users. The `#set!` directive applies to the _entire_ query
pattern when used without a capture argument. To make `#set!`
apply only to a single capture, the capture must be given as an
argument.
The original implementation has a worst-case of O(n^2). Every time
rem_backslash() is true, it calculates the length of the rest of the
string, and shift the rest of it to the left; backslash_halve_save()
copies the original string before doing backslash_halve().
The new implementation is O(n). It will find the first character where
rem_backslash() is true (it will do nothing if it's always false), and
shift the characters in-place; backslash_halve_save() avoids copying the
original string before doing backslash_halve().
runtime(vim): Update base-syntax, improve number matching (vim/vim#14175)
- Limit blob literals to an even number of hexadecimal digits and
correctly located dots.
- Match octal numbers.
The current version unsuccessfully attempts to match a leading '-' as
part of the float literal. It's actually parsed as part of the literal
for all numbers but the syntax file hasn't matched it like that for a
long time and highlights negative numbers as UNARY-MINUS NUMBER. This
will be fixed when better expression matching is implemented.
5cd86c6cff
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: Changing buffer in another window using win_execute() causes
it to show matchparen (after 9.0.0969).
Solution: Delay highlighting with SafeState in BufWinEnter.
(zeertzjq)
closes: vim/vim#1417749ffb6b428
Problem: Internal error with blockwise getregion() in another buffer
Solution: Also change curwin->w_buffer when changing curbuf (zeertzjq)
closes: vim/vim#141795406eb8722
- Add :h fswatch-limitations that notifies user about default inotify
limitations on linux and how to adjust them
- Check for Event queue overflow message from fswatch and refer user to
new documentation
Signed-off-by: Tomas Slusny <slusnucky@gmail.com>
Problem: Arbitrary restriction on 'cmdheight' with ext_messages.
The 'cmdheight'-area may be desirable for the replacing
cmdline.
Solution: Allow non-zero 'cmdheight' with ext_messages.
Problem: may not be clear why failing to split causes an ":Xdo" command
to abort if 'wfb' is set.
Solution: do not return immediately if win_split fails, so E1513 is
still given. Expect both errors in the test. Also fix tests to
pass CI.
(Sean Dewar)
closes: vim/vim#14152769eb2d0c3
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Coverity complains about ignoring return value of win_split()
(after v9.1.150)
Solution: Check if win_split() failed, add winfixbuf.res to Makefile
af7ae81600
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: several minor 'winfixbuf' issues exist, mostly relating to the
quickfix list
Solution: address them and adjust tests. Retab and reflow a few things too.
(Sean Dewar)
Things touched include:
- Replace the semsgs with gettext'd emsgs.
- Handle window switching in ex_listdo properly, so curbuf and curwin
are kept in-sync and trigger autocommands; handle those properly.
- Don't change the list entry index in qf_jump_edit_buffer if we fail
due to 'wfb' (achieved by returning FAIL; QF_ABORT should only be used
if the list was changed).
- Make qf_jump_edit_buffer actually switch to prevwin when using `:cXX`
commands **outside** of the list window if 'wfb' is set in curwin.
Handle autocommands properly in case they mess with the list.
NOTE: previously, it seemed to split if 'wfb' was set, but do nothing
and fail if prevwin is *valid*. This behaviour seemed strange, and maybe
unintentional? Now it aligns more with what's described for the `:cXX`
commands in the original PR description when used outside a list window,
I think.
- In both functions, only consider prevwin if 'wfb' isn't set for it;
fallback to splitting otherwise.
- Use win_split to split. Not sure if there was a specific reason for
using ex_splitview. win_split is simpler and respects modifiers like
:vertical that may have been used. Plus, its return value can be checked
for setting opened_window in qf code (technically win_split_ins autocmds
could immediately close it or change windows, in which the qf code might
close some other window on failure; it's already the case elsewhere,
though).
closes: vim/vim#141424bb505e28c
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: qf_goto_win_with_qfl_file may check if prevwin has 'winfixbuf'
set without checking if it's valid first.
Solution: Reverse the condition. Add a test, a modeline, and a missing
CheckFeature. (Searn Dewar)
closes: vim/vim#141405131f224da
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
`get_target_property(<var> ...)` sets `<var>` to `<var>-NOTFOUND` if the
property doesn't exist for the given target. Detect this situation to
avoid adding various `-Dprop-NOTFOUND` and `-Iprop-NOTFOUND` to the
command-line when generating the headers.
Problem: Internal error or crash when passing invalid position to
getregion().
Solution: Give an error for invalid position (zeertzjq).
closes: vim/vim#1417226dd09ad5e
Problem: too many STRLEN calls when getting a memline
Solution: Optimize calls to STRLEN(), add a few functions in memline.c
that return the byte length instead of relying on STRLEN()
(John Marriott)
closes: vim/vim#1405202d7a6c6cf
Cherry-pick line break changes from patch 8.1.0226.
Cherry-pick ml_line_len from patch 8.1.0579.
Cherry-pick test_comments.vim change from patch 9.1.0153.
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: problem with writing extended attributes on failure
Solution: Change return type to ssize_t and check listxattr's return
value correctly on failure (Paul Tagliamonte)
The existing logic will return when the listxattr call returns with the
errno set to ENOTSUP (or a size of 0 bytes), without checking to see if
listxattr actually failed. listxattr can fail with at least E2BIG,
ENOTSUP, ERANGE, or anything that `stat(2)` can fail with (in my case;
ENOENT from stat).
The returned size is stored to a size_t, but the return type is a
ssize_t. On failure, listxattr returns -1, which will get translated to
size_t's MAX. If the listxattr call failed with anything other than
ENOTSUP, this triggers a request for size_t MAX bytes.
This means that, if the listxattr call fails with anything other than
ENOTSUP on save, vim will error with
`E342: Out of memory! (allocating 18446744073709551615 bytes)`
(keen observers will note 18446744073709551615 is 0xffffffffffffffff)
In reality, this is likely masking a different (usually filesystem?)
error -- but at least it's an error being pushed to the user now, and we
don't try to allocate size_t MAX bytes.
I've opted to change the type that we store listxattr to from size_t to
ssize_t, to match listxattr(2)'s signature, and to check for the -1
return value. Additionally, I've removed the errno check -- if we get a
listxattr failure for any reason, we may as well bail without trying;
it's not like we can even recover.
closes: vim/vim#1416914759ded57
Co-authored-by: Paul R. Tagliamonte <paultag@gmail.com>
runtime(vim): Update base-syntax, improve :menu{,translate} highlighting (vim/vim#14162)
Improve :menu and :menutranslate highlighting.
- Match args to :menutranslation and :popup.
- Only highlight special notation in {rhs} of :menu, like :map.
- Allow line continuations in {rhs} of :menu and between {english} and
{mylang} of :menutranslation, matching common usage.
- Bug fixes.
62b26040eb
Co-authored-by: dkearns <dougkearns@gmail.com>
runtime(java): Recognise string templates (vim/vim#14150)
As this is encouraged in the referenced JEPs, "to visually
distinguish a string template from a string literal, and
a text block template from a text block", the default
colours for java\%[Debug]StrTempl are made distinct from
java\%[Debug]String.
According to §3.2 Lexical Translations (JLS, c. 1996 or any
more recent version), line terminators, white space, and
comments are discarded before tokens are accepted. Since
a template expression comprises a template processor, a dot,
and a template, it may be visually appealing to break up
its head across a few lines whenever its tail already spans
multiple lines. Curiously, no allowance for it is made in
the distributed tests for OpenJDK 21; the proposed regexp
patterns take in consideration a line terminator and white
space after a dot.
References:
https://openjdk.org/jeps/430 (Preview)
https://openjdk.org/jeps/459 (Second Preview)
https://openjdk.org/jeps/465a2c65809da
Co-authored-by: Aliaksei Budavei <32549825+zzzyxwvut@users.noreply.github.com>
This reverts PR #27793.
On second thought, this solution may still crash, because it can leave a
window with a NULL buffer if there are autocommand windows or if closing
a floating window fails. It also makes close_last_window_tabpage() more
complicated, so revert it.
Problem: Crash in WinClosed after BufUnload closes other windows
Solution: Don't trigger WinClosed if the buffer is NULL (zeertzjq)
Now win_close_othertab() doesn't trigger any autocommands if the buffer
is NULL, so remove the autocmd blocking above (which was added not long
ago in patch v9.0.0550) for consistency.
Also remove an unreachable close_last_window_tabpage() above:
- It is only reached if only_one_window() returns TRUE and last_window()
returns FALSE.
- If only_one_window() returns TRUE, there is only one tabpage.
- If there is only one tabpage and last_window() returns FALSE, the
one_window() in last_window() must return FALSE, and the ONE_WINDOW
in close_last_window_tabpage() must also be FALSE.
- So close_last_window_tabpage() doesn't do anything and returns FALSE.
Then the curtab != prev_curtab check also doesn't make much sense, and
the only_one_window() can be replaced with a check for popup and a call
to last_window() since this is a stricter check than only_one_window().
closes: vim/vim#14166b2ec0da080
Problem: expand() removes a slash after an environment variable that
ends with a colon on Windows.
Solution: Check the correct char for a colon (zeertzjq)
closes: vim/vim#14161
Note: Vim still removes the path-separator at the end, if another path separator
follows directly after it, e.g. on:
```
echo $FOO='/usr/'
echo expand('$FOO/bar') == '/usr/bar'
```
see:
,----[ misc1.c:1630 ]
| // if var[] ends in a path separator and tail[] starts
| // with it, skip a character
| if (after_pathsep(dst, dst + c)
| #if defined(BACKSLASH_IN_FILENAME) || defined(AMIGA)
| && (dst == save_dst || dst[-1] != ':')
| #endif
| && vim_ispathsep(*tail))
| ++tail;
`----
13a014452a
Cherry-pick test_expand.vim change from patch 9.0.1257.
Problem: Crash on exit with EXITFREE and using win_execute().
Solution: Also save and restore tp_topframe. (issue vim/vim#9374)
dab17a0689
Couldn't repro the crash in the test, but I only care about this patch so
switch_win sets topframe properly for win_split_ins in nvim_open_win and
nvim_win_set_config.
Add a test using nvim_win_call and :wincmd, as I couldn't repro the issue via
nvim_open_win or nvim_win_set_config (though it's clear they're affected by this
patch).
That said, at that point, could just use {un}use_tabpage inside switch_win
instead, which also updates tp_curwin (though maybe continue to not set it in
restore_win). That would also fix possible inconsistent behaviour such as:
:call win_execute(w, "let curwin_nr1 = tabpagewinnr(1)")
:let curwin_nr2 = tabpagewinnr(1)
Where it's possible for curwin_nr1 != curwin_nr2 if these commands are run from
the 1st tabpage, but window "w" is in the 2nd (as the 1st tabpage's tp_curwin
may still be invalid). I'll probably PR a fix for that later in Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: nvim_win_set_config does not update the tp_curwin of win's original
tabpage when moving it to another.
Solution: update it if win was the tp_curwin. Add a test.
Problem: illegal memory access when completing with invalid bytes.
Solution: Avoid going over the end of the completion text.
vim/vim@4b28ba3
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem Description: In ex_mode, the default_grid.chars are not allocated, and subsequently,
the w_grid.target in curwin is not allocated to default_grid in update_screen. This leads to
a null pointer crash when the completion function is executed in ex_mode.
Solution: Set full_screen when in ex_mode to ensure that default_grid is allocated.
Problem: :close may cause Nvim to quit if an autocommand triggered when
closing the buffer closes all other non-floating windows and
there are floating windows.
Solution: Correct the check for the only non-floating window.
Its corresponding test in Vim is in test_popupwin.win, so having it in
the middle of test_window_cmd.vim is strange, and it is now covered by
tests in ui/float_spec.lua anyway.
Problem: nvim_win_set_config does not update statuslines after removing a split.
Solution: call last_status.
Didn't realize this was missing in the original nvim_win_set_config for splits
PR.
As it can only be done for the current tabpage, do it if win_tp == curtab;
enter_tabpage will eventually call last_status anyway when the user enters
another tabpage.
Problem: there are new ways to escape textlock or break the cmdwin in
nvim_win_set_config and nvim_tabpage_set_win.
Solution: fix them. Use win_goto to check it in nvim_tabpage_set_win and use the
try_start/end pattern like with similar functions such as nvim_set_current_win
(which uses the existing msg_list, if set).
Careful not to use `wp->handle` when printing the window ID in the error message
for nvim_tabpage_set_win, as win_goto autocommands may have freed the window.
On a related note, I have a feeling some API functions ought to be checking
curbuf_locked...
Problem: nvim_win_set_config does not handle failure in win_split_ins properly
yet, which can cause all sorts of issues. Also nvim_open_win and
nvim_win_set_config do not set the error message to the one from win_split_ins.
Solution: handle failure by undoing winframe_remove, like in win_splitmove.
Make sure autocommands from switching to the altwin fire within a valid window,
and ensure they don't screw things up. Set the error message to that of
win_split_ins, if any.
Also change a few other small things, including:
- adjust win_append to take a tabpage_T * argument, which is more consistent
with win_remove (and also allows us to undo a call to win_remove).
- allow winframe_restore to restore window positions. Useful if `wp` was in a
different tabpage, as a call to win_comp_pos (which only works for the current
tabpage) after winframe_restore should no longer be needed.
Though enter_tabpage calls win_comp_pos anyway, this has the advantage of
ensuring w_winrow/col remains accurate even before entering the tabpage
(useful for stuff like win_screenpos, if used on a window in another tabpage).
(This change should probably also be PR'd to Vim later, even though it doesn't
use winframe_restore for a `wp` in a different tabpage yet).
Problem: heap-use-after-free in win_splitmove if Enter/Leave
autocommands from win_split_ins immediately closes "wp".
Solution: check that "wp" is valid after win_split_ins.
(Sean Dewar)
abf7030a5c
Problem: win_gotoid() checks for textlock and other things when switching
to a window that is already current (after v9.1.0119)
Solution: return early with success when attempting to switch to curwin
(Sean Dewar)
2a65e73944
Problem: infinite loop in win_update with 'smoothscroll' set when
window width is equal to textoff, or signed integer overflow
if smaller.
Solution: don't revalidate wp->w_skipcol in that case, as no buffer text
is being shown. (Sean Dewar)
02fcae02a9
Test_window_split_no_room changes were already cherry-picked earlier.
Problem: can switch windows while textlocked via f_win_gotoid and
f_win_splitmove (which also allows switching in the cmdwin).
Solution: Check text_or_buf_locked in f_win_splitmove()
(Sean Dewar)
While at it, call text_or_buf_locked() in f_win_gotoid() instead of testing for
cmdwin_type() (which text_buf_locked() does and in addition will also verify
that the buffer is not locked).
f865895c87
Problem: saving and restoring all frames to split-move is overkill now
that WinNewPre is not fired when split-moving.
Solution: defer the flattening of frames until win_split_ins begins
reorganising them, and attempt to restore the layout by
undoing our changes. (Sean Dewar)
704966c254
Adjust winframe_restore to account for Nvim's horizontal separators when the
global statusline is in use. Add a test.
Problem: win_splitmove fires WinNewPre and possibly WinNew when moving
windows, even though no new windows are created.
Solution: don't fire WinNew and WinNewPre when inserting an existing
window, even if it isn't the current window. Improve the
accuracy of related documentation. (Sean Dewar)
96cc4aef3d
Partial as WinNewPre has not been ported yet (it currently has problems anyway).
Problem: win_split_ins has no check for E36 when moving an existing
window
Solution: check for room and fix the issues in f_win_splitmove()
(Sean Dewar)
0fd44a5ad8
Omit WSP_FORCE_ROOM, as it's not needed for Nvim's autocmd window, which is
floating. Shouldn't be difficult to port later if it's used for anything else.
Make win_splitmove continue working for turning floating windows into splits.
Move the logic for "unfloating" a float to win_split_ins; unlike splits, no
changes to the window layout are needed before calling it, as floats take no
room in the window layout and cannot affect the e_noroom check.
Add missing tp_curwin-fixing logic for turning external windows into splits, and
add a test.
NOTE: there are other issues with the way "tabpage independence" is implemented
for external windows; namely, some things assume that tp_curwin is indeed a
window within that tabpage, and as such, functions like tabpage_winnr and
nvim_tabpage_get_win currently don't always work for external windows (with the
latter aborting!)
Use last_status over frame_add_statusline, as Nvim's last_status already does
this for all windows in the current tabpage. Adjust restore_full_snapshot_rec to
handle this.
This "restore everything" approach is changed in a future commit anyway, so only
ensure it's robust enough to just pass tests.
Keep check_split_disallowed's current doc comment, as it's actually a bit more
accurate here. (I should probably PR Vim to use this one)
Allow f_win_splitmove to move a floating "wp" into a split; Nvim supports this.
Continue to disallow it from moving the autocommand window into a split (funnily
enough, the check wasn't reachable before, as moving a float was disallowed),
but now return -1 in that case (win_splitmove also returns FAIL for this, but
handling it in f_win_splitmove avoids us needing to switch windows first).
Cherry-pick Test_window_split_no_room fix from v9.1.0121.
Update nvim_win_set_config to handle win_split_ins failure in later commits.
Problem: nvim_open_win blocking all win_set_buf autocommands when !enter &&
!noautocmd is too aggressive.
Solution: temporarily block WinEnter/Leave and BufEnter/Leave events when
setting the buffer. Delegate the firing of BufWinEnter back to win_set_buf,
which also has the advantage of keeping the timing consistent (e.g: before the
epilogue in enter_buffer, which also handles restoring the cursor position if
autocommands didn't change it, among other things). Reword the documentation for
noautocmd a bit.
I pondered modifying do_buffer and callees to allow for BufEnter/Leave being
conditionally disabled, but it seems too invasive (and potentially error-prone,
especially if new code paths to BufEnter/Leave are added in the future).
Unfortunately, doing this has the drawback of blocking ALL such events for the
duration, which also means blocking unrelated such events; like if window
switching occurs in a ++nested autocmd fired by win_set_buf. If this turns out
to be a problem in practice, a different solution specialized for nvim_open_win
could be considered. :-)
Problem: currently, for splits, nvim_win_set_config accepts win without any of
split or vertical set, which has little effect and seems error-prone.
Solution: require at least one of split or vertical to also be set for splits.
Also, update nvim_win_set_config docs, as it's no longer limited to just
floating and external windows.
Problem: splitting is disallowed in some cases to prevent the window layout
changes while a window is closing, but it's not checked for.
Solution: check for this, and set the API error message directly.
(Also sneak in a change to tui.c that got lost from #27352; it's a char* buf,
and the memset is assuming one byte each anyway)
Problem: WinNew and win_enter autocommands can delete the target buffer to
switch to, causing a heap-use-after-free.
Solution: store a bufref to the buffer, check it before attempting to switch.
Problem: if switch_win{_noblock} fails to restore the old curwin after WinNew
(e.g: it was closed), wp will become the new curwin, but win_set_buf enter
events would still be blocked if !enter && !noautocmd.
Solution: fire them, as we've actually entered the new window.
Note: there's a problem of switch_win{_noblock} failing to restore the old
curwin, leaving us in wp without triggering WinEnter/WinLeave, but this affects
all callers of switch_win{_noblock} anyways. (It's also not clear how WinLeave
can be called if the old curwin was closed already).
Problem: BufWinEnter is not fired when not entering a new window, even when a
different buffer is specified and buffer-related autocommands are unblocked
(!noautocmd).
Solution: fire it in the context of the new window and buffer. Do not do it if
the buffer is unchanged, like :{s}buffer.
Be wary of autocommands! For example, it's possible for nvim_win_set_config to
be used in an autocommand to move a window to a different tabpage (in contrast,
things like wincmd T actually create a *new* window, so it may not have been
possible before, meaning other parts of Nvim could assume windows can't do
this... I'd be especially cautious of logic that restores curwin and curtab
without checking if curwin is still valid in curtab, if any such logic exists).
Also, bail early from win_set_buf if setting the temp curwin fails; this
shouldn't be possible, as the callers check that wp is valid, but in case that's
not true, win_set_buf will no longer continue setting a buffer for the wrong
window.
Note that pum_create_float_preview also uses win_set_buf, but from a glance,
doesn't look like it properly checks for autocmds screwing things up (win_enter,
nvim_create_buf...). I haven't addressed that here.
Also adds some test coverage for nvim_open_win autocommands.
Closes#27121.
Problem: win_set_config should have the observable effect of moving an existing
window to another place, but instead fires autocommands as if a new window was
created and entered (and does not fire autocommands reflecting a "return" to the
original window).
Solution: do not fire win_enter-related autocommands when splitting the window,
but continue to fire them when entering the window that fills the new space when
moving a window to a different tabpage, as the new curwin changes.
Also, remove "++once" from the WinEnter autocmd in the other test, as omitting
it also crashed Nvim before this fix.
Problem: win_enter autocommands can close new_curwin, crashing if it was the
last window in its tabpage after removing win, or can close parent, crashing
when attempting to split it later.
Solution: remove win first, check that parent is valid after win_enter.
NOTE: This isn't actually quite right, as this means win is not in the window
list or even has a frame when triggering enter autocommands (so it's not
considered valid in the tabpage). This is addressed in later commits.
`_FORTIFY_SOURCE` on Ubuntu caught this, resulting in:
[OLDTEST] Running test_rename
Failed: test_rename :: Nvim exited with non-zero code
Job exited with code 134
Screen (23 lines)
================================================================================
"test_rename.vim" "test_rename.vim" 120L, 3623B
Executing Test_rename_copy()
Executing Test_rename_dir_to_dir()
Executing Test_rename_fails()
Error detected while processing command line..script /<<BUILDDIR>>/neovim-0.9.5/test/old/testdir/runtest.vim[437]..function RunTheTest[44]..Test_rename_fails:
line 17:
E730: using List as a String
line 18:
E976: using Blob as a String
Executing Test_rename_file_ignore_case()*** buffer overflow detected ***: terminated
`snprintf`'s second parameter should be no greater than the number of
remaining bytes in the allocated object. We can see that this was off
by one, because in the simple case where `tail == tempname` (for a file
in the current directory), `rename_with_tmp` was passing `MAXPATHL + 2`
for an object allocated with a size of only `MAXPATHL + 1`.
Introduced in 5f1a153831.
Setting the label `ci:skip-news` will skip the job. This is useful for
maintainers to indicate to contributors that a feature isn't big enough
to warrant a news entry, or for contributors who dislike red CI even if
there's nothing wrong.
Also change label `ci-s390x` to `ci:s390x`; this way it'll be easier to
see that `ci:` are a subcategory of labels that affect CI in some way.
Just some basic spring cleaning.
In the distant past, not all UI:s where remote UI:s. They still aren't,
but both of the "UI" and "UIData" structs are now only for remote UI:s.
Thus join them as "RemoteUI".
Problem: Various warnings from clang on MS-Windows.
Solution: Avoid the warnings. (Yegappan Lakshmanan, closesvim/vim#10553)
a34b4460c2
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
On exit, pty_process_close() may be called after pty_process_finish1()
but before start_wait_eof_timer(), in which case the timer shouldn't be
started because pty_process_close() has already closed it.
Problem: 'shortmess' "F" flag doesn't work properly with 'autoread'
(after 9.1.0154)
Solution: Hide the file info message instead of the warning dialog
(zeertzjq)
closes: vim/vim#14159closes: vim/vim#141588a01744c56
Problem: Duplicate assignment in f_getregion().
Solution: Remove the duplicate assignment. Also improve getregion()
docs wording and fix an unrelated typo (zeertzjq)
closes: vim/vim#141540df8f93bda
Before, we needed to always pack an entire msgpack_rpc Object to
a continous memory buffer before sending it out to a channel.
But this is generally wasteful. it is better to just flush
whatever is in the buffer and then continue packing to a new buffer.
This is also done for the UI event packer where there are some extra logic
to "finish" of an existing batch of nevents/ncalls. This doesn't really
stop us from flushing the buffer, just that we need to update the state
machine accordingly so the next call to prepare_call() always will
start with a new event (even though the buffer might contain overflow
data from a large event).
Problem: can only call getregion() for current buffer
Solution: Allow to retrieve selections from different buffers
(Shougo Matsushita)
closes: vim/vim#1413184bf6e658d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
runtime(c): Recognize "__inline" (vim/vim#14145)
`__inline` is recognized by GCC, and may even be preferred, as MSVC does
not recognize `__inline__`.
63c39e4ef7
Co-authored-by: Wu Yongwei <wuyongwei@gmail.com>
runtime(vim): Update base-syntax, fix escaping :syn and :hi sub-groups (vim/vim#14137)
* runtime(vim): Update base-syntax, fix escaping :syn and :hi sub-groups
- Remove contained :syntax and :highlight sub-groups from the function
body cluster. These should only match in the respective commands.
- Remove vimSynLine syntax group from several clusters. The definition
of vimSynLine was removed in Vim 5.3.
* runtime(vim): Update syntax generator, use standard Last Change date format
The de facto standard date format is YYYY MMM DD.
e5c9ba6015
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: null pointer member access in ui_client_start_server if
channel_job_start returns NULL.
Solution: check for it, return 0 in that case (which is already used to indicate
failure and is handled by main).
Happened on Linux when trying to run Nvim in an old gdbserver instance after having
rebuilt Nvim since. This gave E903 (the nvim binary was deleted, so " (deleted)" appears
as a suffix in the `v:progpath`, making it invalid), then ASAN complains due to the NPD;
instead it now then prints "Failed to start Nvim server!", as expected.
runtime(vim): Update base-syntax, fix issue vim/vim#14135 (vim/vim#14136)
Fix incorrect error highlighting for function calls in :command
definitions. vimFunctionError should be restricted to :function header
lines.
fixes: vim/vim#14135691aee8b07
Co-authored-by: dkearns <dougkearns@gmail.com>
runtime(vim): Update base-syntax, improve :augroup highlighting (vim/vim#14125)
- Explicitly match the bang and group name in :aug! {name}.
- Allow any characters in a group name.
- Match default group switch marker, END.
- Match :aug without arguments (list command).
c4aef9a97b
Co-authored-by: dkearns <dougkearns@gmail.com>
Xcode does not allow having multiple targets depend on a custom command.
This limitation severely hinders its usability and complying with it
would likely require extensive refactoring and boilerplate. It makes
more sense to simply refer users to use "Ninja" or "Unix Makefiles"
instead.
runtime(r,rhelp,rmd,rnoweb,rrst): Update ftplugin, browsefilter labels (vim/vim#14126)
Use the standard format for browsefilter labels:
"File Description (*.ext1, *.ext2, *.ext3)"
e93afc2e61
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: Text is not redrawn with 'relativenumber' when only the 'statuscolumn' is redrawn after inserted lines.
Solution: Force a full redraw if statuscolumn width changed.
Problem:
`vim.lsp.util.rename()` deletes the buffers that are affected by
renaming. This has undesireable side effects. For example, when renaming
a directory, all buffers under that directory are deleted and windows
displaying those buffers are closed. Also, buffer options may change
after renaming.
Solution:
Rename the buffers with :saveas.
An alternative approach is to record all the relevant states and restore
it after renaming, but that seems to be more complex. In fact, the older
version was attempting to restore the states but only partially and
incorrectly.
Context:
Nvim catches errors from the user's `on_exit` and rpc handler callbacks
and prints the error message.
Problem:
Printing the error message uses Nvim api functions. But callbacks
mentioned above run in `:h lua-loop-callbacks` where most of `vim.api`
is not allowed, so Nvim itself raises error.
Solution:
`vim.schedule()` the error reporting when necessary.
close#27678
Return a userdata wrapper around the uv_req_t to allow it to be garbage collected before the program exits.
Previously, the returned userdata held a reference to itself in the Lua registry, meaning it would never be able to be garbage collected until the process ended.
This reverts commit 0e4a895, which attempted a workaround for the same underlying problem, but introduced a use-after-free.
```
Application Specific Information:
abort() called
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x18cde20dc __pthread_kill + 8
1 libsystem_pthread.dylib 0x18ce19cc0 pthread_kill + 288
2 libsystem_c.dylib 0x18cd25a40 abort + 180
3 libsystem_malloc.dylib 0x18cc3cb08 malloc_vreport + 908
4 libsystem_malloc.dylib 0x18cc403f4 malloc_report + 64
5 libsystem_malloc.dylib 0x18cc54ebc find_zone_and_free + 308
6 nvim 0x100eb13b8 uv__fs_scandir_cleanup + 84
7 nvim 0x100eb7e68 uv_fs_req_cleanup + 120
8 nvim 0x100e03634 luv_fs_gc + 132
9 nvim 0x100e42aec lj_BC_FUNCC + 44
10 nvim 0x100e44cc8 gc_call_finalizer + 148 (lj_gc.c:521)
11 nvim 0x100b7fdb4 nlua_push_Object + 320 (converter.c:781)
12 nvim 0x100b7fc48 nlua_push_Dictionary + 332 (converter.c:722)
13 nvim 0x100992228 nlua_api_nvim_get_mode + 160 (lua_api_c_bindings.generated.c:6379)
14 nvim 0x100e42aec lj_BC_FUNCC + 44
15 nvim 0x100e590b4 lua_pcall + 228 (lj_api.c:1150)
```
- Added `@inlinedoc` so single use Lua types can be inlined into the
functions docs. E.g.
```lua
--- @class myopts
--- @inlinedoc
---
--- Documentation for some field
--- @field somefield integer
--- @param opts myOpts
function foo(opts)
end
```
Will be rendered as
```
foo(opts)
Parameters:
- {opts} (table) Object with the fields:
- somefield (integer) Documentation
for some field
```
- Marked many classes with with `@nodoc` or `(private)`.
We can eventually introduce these when we want to.
Problem:
vim._watch.watchdirs has terrible performance.
Solution:
- On linux use fswatch as a watcher backend if available.
- Add File watcher section to health:vim.lsp. Warn if watchfunc is
libuv-poll.
Problem: v:echospace wrong after setting invalid value to 'showcmdloc'.
Solution: Only call comp_col() if value is valid.
(zeertzjq)
closes: vim/vim#14119c27fcf4857
runtime(doc): some improvements to getregion() docs (vim/vim#14122)
- Mention the default selection behavior
- Remove useless sentence
- Correct description about space padding
87410ab3f5
Problem: Floats are arbitrarily positioned at 1 row above screen size.
Solution: Position at 1 row above 'cmdheight', only if window is hidden behind the message area.
Problem: the amount of available space (v:echospace) on the command
line is not correct when showcmdloc is drawn into the
statusline or tabline.
Solution: only add SHOWCMD_COLS to the shown command column when
'showcmdloc' is set to last (Sam-programs)
closes: vim/vim#14108062141b1a7
Co-authored-by: Sam-programs <130783534+Sam-programs@users.noreply.github.com>
Problem: getregion() needs more tests
Solution: Run the getregion() test in both the legacy and Vim9 contexts
(Yegappan Lakshmanan)
closes: vim/vim#141144d55c54e30
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
runtime(doc,netrw): update "Last Change header", remove trailing whitespace
Update Last-Change Header for netrw and doc/indent.txt, fix a trailing
whitespace in indent.txt and make CI happy.
8fad5d5887
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(yaml): disable multiline_scalar detection by default
There have been many complaints about Yaml indenting too much, because
it considers values to be multi-line by default, which leads to
unintended indenting for (apparently most) users.
So let's hide this feature behind the new feature flag, keep it
simple and prefer single line value key pairs by default.
If you want the old behaviour, set the following value: >
:let g:yaml_indent_multiline_scalar = 1
If not set, it will indent the same as the previous line.
closesvim/vim#13845b4eb3f1e44
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(java): Recognise _when_ clauses in _switch_ blocks
Also:
- distinguish _yield_ when used as a contextual keyword from
when used qualified as a method or a method reference (as
can be seen in testdir/input/java_switch.java, variables
and method declarations named _yield_ will be recognised
as the namesake keyword--consider picking other names for
variables, and defining g:java_highlight_functions to have
method names painted; since _yield_ statements can have
trailing parens, they must be recognised as statements,
for only qualified _yield_ method calls are supported);
- recognise grouped _default_ _case_ labels;
- describe primitive types for _case_ labels (JLS, §14.11,
§3.10.1);
- recognise some non-ASCII identifiers (see javaLambdaDef,
javaUserLabel) (further improvement for better recognition
of identifiers will be arranged in a separate PR).
Because the arrow '->' is used in two kinds of expressions,
lambda (abstractions) and _switch_, necessary changes were
made for the recognition of either (and further improvement
touching lambda expressions will be separately arranged).
Because 'default' is used for instance method declarations
in interfaces and in _switch_ labels, necessary changes were
made for the recognition of either (and further improvement
touching method declarations will be separately arranged).
Finally, it deemed appropriate to put 'yield' in the syntax
group of javaOperator rather than javaStatement, for its
member 'var' is also another contextual keyword (e.g., this
is valid syntax: "var var = var(test.var);").
References:
https://openjdk.org/jeps/361 (Switch Expressions)
https://openjdk.org/jeps/440 (Record Patterns)
https://openjdk.org/jeps/441 (Pattern Matching for switch)
Also, add a Java specific filetype plugin for the syntax
test, so that no soft-wrapping of long indented lines occur.
Otherwise the syntax scripts would miss a few lines during
scrolling and verification of the screen dumps.
closes: vim/vim#141059ecf02cd5f
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: [security]: autocmd cause use-after-free in set_curbuf()
(kawarimidoll)
Solution: check side-effect of BufLeave autocommand, when the number
of windows changed, close windows containing buffers that will
be wiped, if curbuf changed unexpectedly make sure b_nwindows
is decremented otherwise it cannot be wiped
set_curbuf() already makes some efforts to ensure the BufLeave
autocommands do not cause issues. However there are still 2 issues
that are not taken care of:
1) If a BufLeave autocommand opens a new window containing the same
buffer as that is going got be closed in close_buffer() a bit later,
we suddenly have another window open, containing a free'd buffer. So we
must check if the number of windows changed and if it does (and the
current buffer is going to be wiped (according to the 'bufhidden'
setting), let's immediately close all windows containing the current
buffer using close_windows()
2) If a BufLeave autocommand changes our current buffer (displays it in
the current window), buf->b_nwindow will be incremented. As part of
set_curbuf() we will however enter another buffer soon, which means, the
newly created curbuf will have b_nwindows still have set, even so the
buffer is no longer displayed in a window. This causes later problems,
because it will no longer be possible to wipe such a buffer. So just
before entering the final buffer, check if the curbuf changed when
calling the BufLeave autocommand and if it does (and curbuf is still
valid), decrement curbuf->b_nwindows.
Both issues can be verified using the provided test (however the second
issue only because such an impacted buffer won't be wiped, causing
futher issues in later tests).
fixes: vim/vim#13839closes: vim/vim#1410455f8bba73b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: getregion() can be improved (after v9.1.120)
Solution: change getregion() implementation to use pos as lists and
one optional {opt} dictionary (Shougo Matsushita)
Note: The following is a breaking change!
Currently, the getregion() function (included as of patch v9.1.120) takes
3 arguments: the first 2 arguments are strings, describing a position,
arg3 is the type string.
However, that is slightly inflexible, there is no way to specify
additional arguments. So let's instead change the function signature to:
getregion(pos1, pos2 [, {Dict}]) where both pos1 and pos2 are lists.
This is slightly cleaner, and gives us the flexibility to specify
additional arguments as key/value pairs to the optional Dict arg.
Now it supports the "type" key to specify the selection type
(characterwise, blockwise or linewise) and now in addition one can also
define the selection type, independently of what the 'selection' option
actually is.
Technically, this is a breaking change, but since the getregion()
Vimscript function is still quite new, this should be fine.
closes: vim/vim#1409019b718828d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: Put in Visual mode wrong if it replaces fold marker.
Solution: Temporarily disable folding during put in Visual mode.
(zeertzjq)
fixes: vim/vim#14097closes: vim/vim#141004e141c66b9
Problem: `:TOhtml` opens the generated HTML code in a split, meaning it
inherits the `help` filetype if a help buffer is to be converted.
Solution: Explicitly set the filetype to `html`.
Previously rename would unconditionally read the to-be-renamed file from the
disk and write it to the disk. This is redundant in some cases
If the file is not already loaded, it's not attached to lsp client, so nvim
doesn't need to care about this file.
If the file is loaded but has no change, it doesn't need to be written.
Then we can just load metadata in C as a single msgpack blob. Which also
can be used directly as binarly data, instead of first unpacking all the
functions and ui_events metadata to immediately pack it again, which was
a bit of a silly walk (and one extra usecase of `msgpack_rpc_from_object`
which will get yak shaved in the next PR)
Problem: Some LSP servers return `textDocument/documentLink` responses
containing file URIs with line/column numbers in the fragment.
`vim.uri_to_fname` returns invalid file names for these URIs.
Solution: Remove the URI fragment from file URIs.
Problem: The cursor screen row was incorrectly being calculated when the
cursor follows a 1 character text_align 'below' virtual text line,
resulting in the cursor being shown on the wrong line.
This was caused by a cell size of 2 instead of 1 being used for the EOL
character, which propagated to the calculation of space for putting the
'below' virtual text on its own line. (rickhowe)
Solution: Fix the size used for the EOL character in calculating the
cursor's screen position (Dylan Thacker-Smith)
fixes: vim/vim#11959
related: vim/vim#12028closes: vim/vim#14096da0c9137d1
Co-authored-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Problem:
The documentation flow (`gen_vimdoc.py`) has several issues:
- it's not very versatile
- depends on doxygen
- doesn't work well with Lua code as it requires an awkward filter script to convert it into pseudo-C.
- The intermediate XML files and filters makes it too much like a rube goldberg machine.
Solution:
Re-implement the flow using Lua, LPEG and treesitter.
- `gen_vimdoc.py` is now replaced with `gen_vimdoc.lua` and replicates a portion of the logic.
- `lua2dox.lua` is gone!
- No more XML files.
- Doxygen is now longer used and instead we now use:
- LPEG for comment parsing (see `scripts/luacats_grammar.lua` and `scripts/cdoc_grammar.lua`).
- LPEG for C parsing (see `scripts/cdoc_parser.lua`)
- Lua patterns for Lua parsing (see `scripts/luacats_parser.lua`).
- Treesitter for Markdown parsing (see `scripts/text_utils.lua`).
- The generated `runtime/doc/*.mpack` files have been removed.
- `scripts/gen_eval_files.lua` now instead uses `scripts/cdoc_parser.lua` directly.
- Text wrapping is implemented in `scripts/text_utils.lua` and appears to produce more consistent results (the main contributer to the diff of this change).
Validate the channel number before responding to an OSC 10/11 request.
When used with nvim_open_term, the channel number is unset (since there
is no process on the other side of the PTY).
Problems:
- Illegal bytes after valid UTF-8 char cause utf_cp_*_off() to fail.
- When stream isn't NUL-terminated, utf_cp_*_off() may go over the end.
Solution: Don't go over end of the char of end of the string.
writer is only ever used with FileDescriptor. We already have separate
code paths for serializing shada data into memory, see
shada_encode_regs() and friends
Functions like file_open_new() and file_open_fd_new() which just is a
wrapper around the real functions but with an extra xmalloc/xfree around
is an anti-pattern. If the caller really needs to allocate a
FileDescriptor as a heap object, it can do that directly.
FileDescriptor by itself is pretty much a pointer, or rather two:
the OS fd index and a pointer to a buffer. So most of the time an extra
pointer layer is just wasteful.
In the case of scriptin[curscript] in getchar.c, curscript used
to mean in practice:
N+1 open scripts when curscript>0
zero or one open scripts when curscript==0
Which means scriptin[0] had to be compared to NULL to disambiguate the
curscript=0 case.
Instead, use curscript==-1 to mean that are no script,
then all pointer comparisons dissappear and we can just use an array of
structs without extra pointers.
With "intermediate" flag, only using minimal timeout is too short and
may lead to failures.
Also remove the fallback timeout in screen:expect_unchanged(), as having
a different fallback timeout than screen:expect() is confusing.
Assert that the buffer number passed to apply_text_edits is fully
resolved (not 0 or null). Pass the known buffer number to
apply_text_edits from lsp.formatexpr().
Problem: Insufficient testing for 'delcombine'.
Solution: Add test for both Normal and Insert modes without Arabic.
(zeertzjq)
closes: vim/vim#14086cd3a13e774
Problem: buffer-completion code too complicated and does not always
find all matches (irisjae)
Solution: do not try to anchor pattern to beginning of line or
directory-separator, always return all matches
Note: we are considering the non-fuzzy buffer-matching here.
Currently, the buffer-completion code makes 2 attempts to match a
pattern against the list of available patterns. First try is to match
the pattern and anchor it to either the beginning of the file name or
at a directory-separator (// or \\).
When a match is found, Vim returns the matching buffers and does not try
to find a match anywhere within a buffer name. So if you have opened two
buffers like /tmp/Foobar.c and /tmp/MyFoobar.c using `:b Foo` will only
complete to the first filename, but not the second (the same happens
with `getcompletion('Foo', 'buffer')`).
It may make sense, that completion priorities buffer names at directory
boundaries, but it inconsistent, may cause confusion why a certain
buffer name is not completed when typing `:b Foo<C-D>` which returns
only a single file name and then pressing Enter (to switch to that
buffer), Vim will error with 'E93: More than one match for Foo').
Similar things may happen when wiping the /tmp/Foobar.c pattern and
afterwards the completion starts completing other buffers.
So let's simplify the code and always match the pattern anywhere in the
buffer name, do not try to favor matches at directory boundaries. This
is also simplifies the code a bit, we do not need to run over the list
of buffers several times, but only twice.
fixesvim/vim#13894closes: vim/vim#140820dc0bff000
Cherry-pick test_cmdline.vim from patch 9.1.0019 as it already passes.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: using "C" and 've=all' set, doesn't include composing chars
when changing a line, keeps the composing chars for whatever
is typed afterwards.
Solution: Use mb_head_off() and mb_ptr2len() instead of mb_tail_off().
(zeertzjq)
closes: vim/vim#14083048761bcd4
* Convert lua_pushlstring from a macro to a function
* strerror_r is not available on mingw
* Support getting io.popen results on file:close() on PUC-Rio Lua 5.1
* Fix missing closing parenthesis in preprocessor macro
* fix detection of LUA_USE_WINDOWS define
Also switch to new org
Problem: Virtual text with text_wrap 'wrap' was effectively being
truncated by a break conditional on the EOL list character
being added to the screen line. (BigPeet)
Solution: Remove the condition that was leading to the early break and
instead fix a similar but incorrectly written outer condition
that checks if there is more to add at the end of the screen
line. (Dylan Thacker-Smith)
Also, related:
- update comment in win_line()
- remove no longer necessary at_end_str variable in win_line()
fixes: vim/vim#12725closes: vim/vim#14079f548ae7b63
Co-authored-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
os_getenv("FOO") caches the result when $FOO is set to something
non-empty. However, when $FOO was not set, every new call to
os_getenv("FOO") would allocate a temporary scratch buffer to
immediately throw away.
This has an huge impact e.g. on logging which depends on potentially
non-set env vars.
runtime(spec): Recognize SourceLicense tag name in RPM spec syntax (#14046)
rpm-4.19.0 added a new SourceLicense tag. It is used at the same place
as License tag.
This patch adds the new tag name into a Vim syntax file to be
highligted the same way as the License tag. Note that it has to be
defined in the syntax file before Source\d* regexp. Otherwise it's not
recognized by Vim.
315cd1fbcb
Co-authored-by: Petr Pisar <ppisar@redhat.com>
Problem: Naming a non-pointer variable "oap" is strange.
Solution: Rename it to "oa". Also prevent using freed memory in case of
memory allocation failure. (zeertzjq)
closes: vim/vim#140755e3674b42d
Problem: Internal error when passing mark in another buffer to
getregion().
Solution: Don't allow marks in another buffer (zeertzjq)
closes: vim/vim#14076
Internal error when passing mark in another buffer to getregion()
421b597470
Problem: hard to get visual region using Vim script
Solution: Add getregion() Vim script function
(Shougo Matsushita, Jakub Łuczyński)
closes: vim/vim#13998closes: vim/vim#115793f905ab3c4
Cherry-pick changes from patch 9.1.0122, with :echom instead of :echow.
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Jakub Łuczyński <doubleloop@o2.pl>
There is now a new tmux 3.4 release that queries background color from
the parent terminal if background is not set in tmux, so removing the
passthrough still works when background is not set in tmux, and fixes
the incorrect detection when background is set in tmux.
Problem:
When a function has multiple signatures, putting its tag at the last one
may make one think that's its only signature.
Solution:
When a function has multiple signatures, put its tag at the first one.
* fix: Use os_uname() to check for Linux by @cryptomilk in #686
* docs: typo in a table field name by @Bilal2453 in #689
* docs: most new_handle methods won't return fail by @Bilal2453 in #683
* test-tty: Don't depend on stdin/stdout handle type by @squeek502 in #688
* Bump/libuv by @zhaozg in #690
* Annotate .gitmodules with branch and tag by @creationix in #693
Currently, highlight.on_yank() does buffer-local highlighting, this PR
makes it window scoped.
Also fix the problem that when yanking in a buffer, moving to another
buffer, and yanking before the original buffer highlight disappears, the
original buffer highlight won't disappear on timeout.
To align the output of `nvim_get_hl` with its documentation -- which
points to `nvim_set_hl`, remove mentions of the keys `foreground`,
`background` and `special`.
The long keys are are still supported (via fallback checks inside
`dict2hlattrs`), but the `fg`, `bg` and `sp` keys are preferenced.
As only a few API functions make use of explicit freeing of the return
value, make it opt-in instead. The arena is always present under the
hood, so `Arena *arena` arg now doesn't mean anything other than getting
access to this arena. Also it is in principle possible to return an
allocated value while still using the arena as scratch space for other
stuff (unlikely, but there no reason to not allow it).
runtime(filetype): Modula-2 files with priority not detected (vim/vim#14055)
Problem: Modula-2 files with a specified priority are not detected.
Solution: Match the priority syntax in module header lines when
performing heuristic content detection.
Disable the :defcompile debug line. This was accidentally left enabled
in commit 68a8947.
ef387c062b
Co-authored-by: dkearns <dougkearns@gmail.com>
Help outlines, invoked by `gO`, displays the help section titles in the
location list window. This feature is implemented by setting the buffer
lines after opening the window, but this implementation breaks the
assumption that the quickfix window texts are consistently constructed
by the quickfix list items. I think we can use the conceal feature here.
Using conceal here improves interoperability between quickfix plugins,
and also simplifies the outline implementation.
Originally reported at https://github.com/itchyny/vim-qfedit/issues/12
The way ml_replace_buf is implemented makes it unfriendly for
being used in a loop: every call allocates a scratch buffer for putting
the line into the "dirty" state. This then immediately needs to be freed
as the next ml_replace_buf and/or ml_append_buf call will flush that buffer.
It's better to later pay the price of allocating the scratch buffer only if
the line is being immediately edited (likely when using the API to only
change one line) with an extra memcpy, than allocating that buffer
multiple times every time the API is called.
Of course, a separate xmalloc/xfree cycle for each time the dirty line
changes is unwanted to begin with. But fixing that is a later refactor.
Problem: Using freed memory with full tag stack and user data
(Konstantin Khlebnikov)
Solution: Clear the user data pointer of the newest entry.
(zeertzjq, Konstantin Khlebnikov)
fixes: neovim/neovim#27498closes: vim/vim#14053c86bff1771
Cherry-pick Test_tag_stack() changes from patch 9.0.0767.
Co-authored-by: Konstantin Khlebnikov <koct9i@gmail.com>
Note: kSDItemHeader is something is _written_ by nvim in the shada file
to identify it for debugging purposes outside of nvim. But this data wasn't ever used by
neovim after reading the file back, So I removed the parsing of it for now.
Splitting it on word boundaries rather than only spaces allows for better
detection. The issue labeler previously didn't catch titles such as
`treesitter: noisy "Invalid node type" error`.
Co-authored-by: casswedson <casswedson@users.noreply.github.com>
Problem: Setting some options changes curswant unnecessarily.
Solution: Add a P_HLONLY flag that prevents changing curswant.
(zeertzjq)
closes: vim/vim#14044fcaed6a70f
Run the release workflow on macos-14 to use faster M1 runners.
Lock the deployment target to the oldest supported version (11.0,
due to libuv support) instead of relying on the host OS version.
Problem: No test coverage on ARM.
Solution: Add `macos-14` tests, which now run on M1. Skip unit tests as these don't work on M1, see #26145. Also test universal build on M1.
Note: `macos-14` will be `macos-latest` in Q2 2024, so we'll want to switch these to keep Intel and unittest coverage on macos (while GH still offers Intel runners).
Explicitly set the build type for both deps and Nvim. They are already
explicitly set on Windows to RelWithDebInfo. Now also explicitly set
them to Debug on POSIX.
Debugging dependencies is rare so a Debug build type is usually not
needed. In cases where it _is_ needed it is easy to rebuild in Debug
mode. But since Release builds are more common, it makes more sense as a
default.
For Neovim itself we stick with a Debug build as a default, since
rebuilding and debugging is done _much_ more frequently than with
dependencies (which we _mostly_ expect to "just work").
Also remove the CMAKE_BUILD_TYPE variable in the Makefile, since this is
set by default in CMake.
Query patterns can contain quantifiers (e.g. (foo)+ @bar), so a single
capture can map to multiple nodes. The iter_matches API can not handle
this situation because the match table incorrectly maps capture indices
to a single node instead of to an array of nodes.
The match table should be updated to map capture indices to an array of
nodes. However, this is a massively breaking change, so must be done
with a proper deprecation period.
`iter_matches`, `add_predicate` and `add_directive` must opt-in to the
correct behavior for backward compatibility. This is done with a new
"all" option. This option will become the default and removed after the
0.10 release.
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
Co-authored-by: MDeiml <matthias@deiml.net>
Co-authored-by: Gregory Anders <greg@gpanders.com>
runtime(vim): Update base-syntax, remove unused vimString region
These were included with the initial release of the syntax file for Vim
5 and were probably intended to allow for syn-region start/skip/end
patterns with a '!' or '+' delimiter. However, these cases are
currently handled by the vimSynRegPat group.
The removed patterns never match anywhere in the distributed runtime
files and it is believed that this is generally true.
closes: vim/vim#140351633de8c35
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
runtime(vim): update Vim Syntax generator
- Add missing "Last Change:" line.
- The date on this line in vim.vim is updated by update_date.vim at
Make time. (I made a mistake in the file path)
- Remove unnecessary "b:loaded_syntax_vim_ex".
- Remove "Base File Date:" line in vim.vim.base
- Add Doug Kearns as Maintainer
closes: vim/vim#140315c3855bcab
Co-authored-by: h-east <h.east.727@gmail.com>
runtime(vim): accept dot in completionList for Vim9 syntax (vim/vim#13832)
if you have autoloaded command complete function in vim9script, it shouldn't be highlighted as Error:
```
import autoload "share.vim"
command! -range=% -nargs=? -complete=custom,share.Complete Share share.Paste(<q-args>, <line1>, <line2>)
```
`share.Complete` is a valid complete function.
ceed36873e
Co-authored-by: Maxim Kim <habamax@gmail.com>
runtime(less): update "Last Change:" header
Commit 103f1dfb7df350650a5d7caadb0364bd79e9d25b forgot to update the
"Last Change:" header. So update it now.
79230f027a
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(less): reset readonly setting when disabling less mode
While at it, also do the unmap only if a specific key has been mapped.
There are some keys that are only selectively mapped and it would cause
an error if we are trying to unmap such a key (e.g. z when your
foldmethod is not manual).
fixes: vim/vim#14040103f1dfb7d
Co-authored-by: Christian Brabandt <cb@256bit.org>
https://github.com/neovim/neovim/pull/27428 changed the semantics of
callbacks passed to nvim_create_autocmd such that any truthy value will
delete the autocommand (rather than just the literal boolean value
`true`). Update the documentation accordingly and add an entry to
`news.txt`.
The behavior is now consistent between nvim_create_autocmd and
nvim_buf_attach.
Problem: duplicate code when cleaning undo stack
Solution: refactor undo cleanup into a single public function
related: vim/vim#139289071ed8107
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: When the quickfix buffer has been modified an autocommand
may invalidate the undo stack (kawarimidoll)
Solution: When clearing the quickfix buffer, also wipe the undo stack
fixes: vim/vim#13905closes: vim/vim#13928f0d3d4a426
Co-authored-by: Christian Brabandt <cb@256bit.org>
Note: this contains two _temporary_ changes which can be reverted
once the Arena vs no-Arena distinction in API wrappers has been removed.
Both nlua_push_Object and object_to_vim_take_luaref() has been changed
to take the object argument as a pointer. This is not going to be
necessary once these are only used with arena (or not at all) allocated
Objects.
The object_to_vim() variant which leaves luaref untouched might need to
stay for a little longer.
Problem: filetype: no support for dtso files
Solution: Add detection for *.dtso files as dts file type
(Markus Schneider-Pargmann)
*.dtso files are devicetree overlay files which have the same syntax as dts or dtsi files.
closes: vim/vim#14026b1700fb33f
Co-authored-by: Markus Schneider-Pargmann <msp@baylibre.com>
Problem: Visual highlight hard to read with 'termguicolors'
(Maxim Kim)
Solution: Set Visual GUI foreground to black (with background=light)
and lightgrey (with background=dark)
(Maxim Kim)
fixes: vim/vim#14024closes: vim/vim#1402534e4a05d02
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: Visual highlighting can still be improved
Solution: Update Visual highlighting for 8 color terminals,
use uniform grey highlighting for dark and light bg
(Maxim Kim)
Update terminal Visual
1. Use `ctermbg=Grey ctermfg=Black` for both dark and light
This uniforms Visual highlighting between default dark and light colors
And should work for vim usually detecting light background for terminals
with black/dark background colors.
Previously used `ctermfg=White` leaks `cterm=bold` if available colors
are less than 16.
2. Use `term=reverse cterm=reverse ctermbg=NONE ctermfg=NONE`
for terminals reporting less than 8 colors available
If the terminal has less than 8 colors, grey just doesn't work right
closes: vim/vim#1394059bafc8171
Co-authored-by: Maxim Kim <habamax@gmail.com>
Previously the LSP-Client object contained some fields that are also
in the client config, but for a lot of other fields, the config was used
directly making the two objects vaguely entangled with either not having
a clear role.
Now the config object is treated purely as config (read-only) from the
client, and any fields the client needs from the config are now copied
in as additional fields.
This means:
- the config object is no longet normalised and is left as the user
provided it.
- the client only reads the config on creation of the client and all
other implementations now read the clients version of the fields.
In addition, internal support for multiple callbacks has been added to
the client so the client tracking logic (done in lua.lsp) can be done
more robustly instead of wrapping the user callbacks which may error.
and for return value of nlua_exec/nlua_call_ref, as this uses
the same family of functions.
NB: the handling of luaref:s is a bit of a mess.
add api_luarefs_free_XX functions as a stop-gap as refactoring
luarefs is a can of worms for another PR:s.
as a minor feature/bug-fix, nvim_buf_call and nvim_win_call now preserves
arbitrary return values.
Problem: Loading `vim.fs` via the `vim.loader` Lua package loader will
result in a stack overflow due to a cyclic dependency. This may happen
when the `vim.fs` module isn't byte-compiled, i.e. when `--luamod-dev`
is used (#27413).
Solution: `vim.loader` depends on `vim.fs`. Therefore `vim.fs` should
be loaded in advance.
Problem: upper-case of ß should be U+1E9E (CAPITAL LETTER SHARP S)
(fenuks)
Solution: Make gU, ~ and g~ convert the U+00DF LATIN SMALL LETTER SHARP S (ß)
to U+1E9E LATIN CAPITAL LETTER SHARP S (ẞ), update tests
(glepnir)
This is part of Unicode 5.1.0 from April 2008, so should be fairly safe
to use now and since 2017 is part of the German standard orthography,
according to Wikipedia:
https://en.wikipedia.org/wiki/Capital_%E1%BA%9E#cite_note-auto-12
There is however one exception: UnicodeData.txt for U+00DF
LATIN SMALL LETTER SHARP S does NOT define U+1E9E LATIN CAPITAL LETTER
SHARP S as its upper case version. Therefore, toupper() won't be able
to convert from lower sharp s to upper case sharp s (the other way
around however works, since U+00DF is considered the lower case
character of U+1E9E and therefore tolower() works correctly for the
upper case version).
fixes: vim/vim#5573closes: vim/vim#14018bd1232a1fa
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: 'breakindentopt' "min" works incorrectly with 'signcolumn'.
Solution: Use win_col_off() and win_col_off2().
(zeertzjq)
closes: vim/vim#14014f0a9d65e0a
vim-patch:9.1.0100: Redrawing can be improved with undo and 'spell'
Problem: When undoing with 'spell', redrawWinline() is called after
changed_lines(), while later win_update() sets redraw type to
UPD_NOT_VALID, even though w_redraw_top and w_redraw_bot are
still valid.
Solution: Only set redraw type to UPD_NOT_VALID when inserting/deleting
lines after parts of window has pending redraw, i.e., when
changed_lines() is called after redrawWinline().
(zeertzjq)
closes: vim/vim#14019f2d90a3511
Problem: Mechanism to prevent recursive screen updating is incomplete.
Solution: Add "redraw_not_allowed" and set it in build_stl_str_hl().
(issue vim/vim#10952)
471c0fa3ee
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Attempting to manipulate the window layout via ex commands is not safe
here. It is also redundant: `win_free_all()` can free multiple windows
by itself perfectly fine.
Problem: CompleteChanged not triggered when new leader added causing
no matching item in the completion menu
Solution: When completion is active but no items matched still trigger
CompleteChanged event
(glepnir)
closes: vim/vim#139820d3c0a66a3Fix#15077
runtime(vim): Update syntax file (vim/vim#14009)
- allow comments after :highight commands
- match the bang in a :highlight[!] command
- highlight the bang in :map[!], :menu[!] and :unlet[!] with vimOper
like all other commands
b614b284ee
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: #25826 added a (duplicate) sign comparison function, which was
modified and strayed from the original in #27418.
Solution: Merge the two functions and add a display test that actually
tests for this order in addition to the legacy tests.
Problem: 'breakindent' behaves inconsistently with 'list' and splits.
Solution: Use 'listchars' from the correct window and handle caching
properly. Move cheaper comparisons to the top.
(zeertzjq)
closes: vim/vim#14008efabd7c8d4
The `get_indent_str_vtab()` function currently calls `tabstop_padding()`
every time a tab is encountered (unless tabstops aren't used).
`tabstop_padding()` either does a division by 'tabstop' If 'vartabstop'
is not set, or iterates through the 'vartabstop' list to find current
tab width.
Since the virtual column only increases, we can keep track of where the
next tabstop would be, and update this information once it was reached.
`get_indent_str_vtab()` also depends on 'listchars' "tab" value from the
current window, even though it may be called for a line from the same
buffer in a different window. In most cases, it is called with tabstops
enabled (last argument was `false`), so I split the function into one
that uses tabstops and the other that doesn't.
I removed `get_indent_str()` since I couldn't find any calls to it.
runtime(gpg): Mark dangerous use-embedded-filename with WarningMsg
The syntax highlighter is likely to encourage people to use the listed
commands.
But `use-embedded-filename` is a dangerous option that can cause GnuPG
to write arbitrary data to arbitrary files whenever GnuPG encounters
malicious data.
GnuPG upstream explicitly warns against using this option:
https://dev.gnupg.org/T4500https://dev.gnupg.org/T6972
However, since this is a valid option, we cannot just drop it from the
syntax script. Instead, let's mark it with the WarningMsg highlighting
to make it obvious, that this option is different (and should not be
used for security reasons).
closes: vim/vim#139616d91227267
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
The dispatchers used by the RPC client should be defined in the client,
so they have been moved there. Due to this, it also made sense to move
all code related to client configuration and the creation of the RPC
client there too.
Now vim.lsp.start_client is significantly simplified and now mostly
contains logic for tracking open clients.
- Renamed client.new -> client.start
When "q" is set in 'shortmess' it now fully hides the "recording @a" message
when you are recording a macro instead of just shortening to "recording". This
removes duplication when using reg_recording() in the statusline.
Related #19193
Problem: Still a qsort() comparison function fuzzy_match_item_compare()
that returns result of subtraction (after 9.1.0089).
Solution: Use an explicit comparison instead of subtraction.
(zeertzjq)
closes: vim/vim#1400477078276bf
Problem: qsort() comparison functions should be transitive
Solution: Do not subtract values, but rather use explicit comparisons
Improve qsort() comparison functions
There has been a recent report on qsort() causing out-of-bounds read &
write in glibc for non transitive comparison functions
https://www.qualys.com/2024/01/30/qsort.txt
Even so the bug is in glibc's implementation of the qsort() algorithm,
it's bad style to just use substraction for the comparison functions,
which may cause overflow issues and as hinted at in OpenBSD's manual
page for qsort(): "It is almost always an error to use subtraction to
compute the return value of the comparison function."
So check the qsort() comparison functions and change them to be safe.
closes: vim/vim#13980e06e437665
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Restore lastused_tabpage too early in do_arg_all() function it
will change later in the function.
Solution: Restore lastused_tabpage a bit later, when being done with
tabpages (glepnir)
closes: vim/vim#139922975a54f28
Problem:
Since 2448816956, the --startuptime report shows
two blocks of data. The TUI process and its embedded nvim process write to the
file concurrently, which may interleave the two startup sequences into the same
timeline.
Solution:
Report each process as a separate section in the same file.
1. Each process buffers the full report.
2. After startup is finished, the buffer is flushed (appended) to the file.
Fix#23036
Sample report:
--- Startup times for process: Primary/TUI ---
times in msec
clock self+sourced self: sourced script
clock elapsed: other lines
000.006 000.006: --- NVIM STARTING ---
000.428 000.422: event init
000.728 000.301: early init
...
005.880 000.713: init highlight
005.882 000.002: --- NVIM STARTED ---
--- Startup times for process: Embedded ---
times in msec
clock self+sourced self: sourced script
clock elapsed: other lines
000.006 000.006: --- NVIM STARTING ---
000.409 000.403: event init
000.557 000.148: early init
000.633 000.077: locale set
...
014.383 000.430: first screen update
014.387 000.003: --- NVIM STARTED ---
Problem: TextChanged not triggered for :norm! commands
(machakann, after v9.0.2031)
Solution: Only reset curbuf->b_last_changedtick if TextChangedI
was triggered in insert mode (and not blocked)
Note: for unknown reasons, the test fails on Windows (but seems to work
fine when running interactively)
fixes: vim/vim#13967closes: vim/vim#13984c9e79e5284
Cherry-pick test_autocmd.vim change from patch 8.2.4149.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Visual hl wrong when it ends before multibyte 'showbreak'.
(lacygoil)
Solution: Use vcol_sbr instead of adding n_extra.
(zeertzjq)
fixes: vim/vim#11272closes: vim/vim#13996df23d7f4bd
Bug doesn't apply to Nvim.
Problem:
If a rename results in a path that has missing parent directory(s), it
will fail.
Solution:
Do a recursive mkdir before attempting the rename.
Problem:
`vim.lsp.diagnostic.on_diagnostic` accepts an undocumented severity_limit
option which is widely used.
Solution:
Deprecate it in favour of `{min = severity}` used in `vim.diagnostic`.
Since this is undocumented, the schedule for removal is accelerated to
0.11.
Currently having two separate memory strategies for API return values is
a bit unnecessary, and mostly a consequence of converting the hot spot
cases which needed it first. But there is really no downside to using
arena everywhere (which implies also directly using strings which are
allocated earlier or even statically, without copy).
There only restriction is we need to know the size of arrays in advance,
but this info can often be passed on from some earlier stage if it is
missing.
This collects some "small" cases. The more complex stuff will get a PR
each.
Document that the `start` and `stop` parameters in
`Query:iter_captures()` and `Query:iter_matches()` are optional.
The tree-sitter lib has been bumped up to 0.20.9, so we also no longer
need "Requires treesitter >= 0.20.9".
- `TSQuery`: userdata object for parsed query.
- `vim.treesitter.Query`: renamed from `Query`.
- Add a new field `lang`.
- `TSQueryInfo`:
- Move to `vim/treesitter/_meta.lua`, because C code owns it.
- Correct typing for `patterns`, should be a map from `integer`
(pattern_id) to `(integer|string)[][]` (list of predicates or
directives).
- `vim.treesitter.QueryInfo` is added.
- This currently has the same structure as `TSQueryInfo` (exported
from C code).
- Document the fields (see `TSQuery:inspect`).
- Add typing for `vim._ts_parse_query()`.
Problem: Redrawing can be improved when inserting/deleting lines with 'number'.
Solution: Only redraw the number column of lines below changed lines.
Add a test as this wasn't previously tested.
(zeertzjq)
closes: vim/vim#13985ae07ebc04b
Problem: Redrawing can be improved when deleting lines with 'cursorline'.
Solution: Use smarter invalidation and adjustment. Remove unnecessary
UPD_VALID as it is already set at the top of the loop. Make
the test for vim/vim#4862 fail without the fix.
(zeertzjq)
closes: vim/vim#139867ce34c9a94
Getting current channel info was kind of annoying via RPC. Two
functions had to be called:
1. `nvim_get_api_info` which returns `[channel_id, meta_data]`.
- This results in `channel_id = api.nvim_get_api_info()[0]`.
- Here the meta_data is sent but never used.
2. Finally call `nvim_get_chan_info(channel_id)`.
This commit reduces the need for `nvim_get_api_info` as passing 0
returns current channel info.
Implement api_keydict_to_dict as the complement to api_dict_to_keydict
Fix a conversion error when nvim_get_win_config gets called from lua,
where Float values "x" and "y" didn't get converted to lua numbers.
runtime(doc): Clarify list-concatenation a bit more
Make doc list-concatenation more clear as for += and extend().
1. describe `+=` for list-concatenation more accurately
2. add `extend()` example for list-concatenation
3. Fix CI errors for missing helptags reference |+=|
closes: vim/vim#13983c9c2e2d2ff
Co-authored-by: qeatzy <qeatzy@users.noreply.github.com>
Problem: unexpected error for modifying final list using += operator
(Ernie Rael)
Solution: Allow List value modification of a final variable using +=
operator
(Yegappan Lakshmanan)
fixes: vim/vim#13745fixes: vim/vim#13959closes: vim/vim#139621af35631f8
Only port eval.txt changes.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem:
The LSP client code is implemented as a complicated closure-class
(class defined in a single function).
Solution:
Move LSP client code to a more conventional Lua class and move to a
separate file.
`utf_char2cells()` calls `utf_printable()` twice (sometimes indirectly,
through `vim_isprintc()`) for characters >= 128. The function can be
refactored to call to it only once.
`utf_printable()` uses binary search on ranges of unprintable characters
to determine if a given character is printable. Since there are only 9
ranges, and the first range contains only one character, binary search
can be replaced with SSE2 SIMD comparisons that check 8 ranges at a
time, and the first range is checked separately. SSE2 is enabled by
default in GCC, Clang and MSVC for x86-64.
Add 3-byte utf-8 to screenpos_spec benchmarks.
Problem:
When nvim_input is followed immediately by non-fast events on RPC, both
events and input are available after the polling done by the os_inchar()
in state_enter(), but state_enter() then chooses to process events even
if input is available, which is inconsistent with state_handle_k_event()
that stops processing events once input is available.
Solution:
Also check for available input after the os_inchar() in state_enter().
Problem: LineNrAbove and LineNrBelow background wrong on wrapped lines.
Solution: Update number column also for wrapped part of a line.
(zeertzjq)
closes: vim/vim#13974ebfd856cfd
Cherry-pick test_number.vim changes from patch 9.0.0626.
runtime(dosbatch): improve '::' comment highlighting
Added a syntax region for command blocks so that the highlighting of
`::` comments in them can be controlled. The `dosbatch_colons_comment`
variable now controls if all `::` comments in a code block are
highlighted as comments or errors. A `::` comment at the end of a
command block is always highlighted as an error.
This re-enables the highlighting of `::` comments in `.bat` files as
requested in vim/vim#13666, while allowing control of highlighting them in
command blocks requested in vim/vim#11778 and first attempted in vim/vim#11980.
related: vim/vim#11980fixes: vim/vim#13666f7f33e3719
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Mike Williams <mikew@globalgraphics.com>
Problem: The call to redraw_for_cursorline() in nv_mousescroll() is
unnecessary because redraw_for_cursorline() only sets redraw
type to UPD_VALID, and all code paths in do_mousescroll()
already set redraw type to at least UPD_VALID.
Solution: Remove call to redraw_for_cursorline() in nv_mousescroll().
(zeertzjq)
closes: vim/vim#139793f1b5312e0
Determine the needed buffer space first, instead of trying to revert the
effect of prepare_call if message does not fit. The previous code did
not revert the full state, which caused corrupted messages to be sent.
So, rather than trying to fix all of that, with fragile and hard to read
code as a result, the code is now much more simple, although slightly
slower.
Problem: `tui->space_buf` may be smaller than the width of the TUI or widest
grid, causing an overflow when calling `tui_grid_clear` if `print_spaces` is
called from `clear_region` (clears the TUI's screen since #23428).
Solution: resize `space_buf` to be wide enough to fit the TUI or widest grid.
Didn't bother shrinking the allocation if the max widths decrease.
Problem:
- `:InspectTree` was showing node ranges in 1-based indexing, i.e., in
vim cursor position (lnum, col). However, treesitter API adopts
0-based indexing to represent ranges (Range4). This can often be
confusing for developers and plugin authors when debugging code
written with treesiter APIs.
Solution:
- Change to 0-based indexing from 1-based indexing to show node ranges
in `:InspectTree`.
- Note: To make things not complicated, we do not provide an option or
keymap to configure which indexing mode to use.
Problem: insert completion not correct when adding new leader
Solution: Reset compl_curr_match to compl_shown_match
(glepnir)
closes: vim/vim#13957cbb46b4398
runtime(vim): Update syntax file (vim/vim#13969)
Improve string interpolation highlighting.
Use the vimSep group to highlight interpolation braces as vimOperParen
has no highlighting of its own and employs vimSep via matchgroup.
Add vimNumber to the interpolation group's contained list.
7c5aeaffa2
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: There is no test case for vim.lsp.tagfunc; so CI was unable to
catch the infinite loop bug (#27325).
Solution: Add test cases for vim.lsp.tagfunc().
Problem: vim.lsp.tagfunc() causes an infinite loop.
This is a bug happened while introducing deferred loading.
Solution: Rename the private module to `vim.lsp._tagfunc`.
Problem: did_set_breakat() should be in optionstr.c as 'breakat' is a
string option.
Solution: Move did_set_breakat() to optionstr.c.
(zeertzjq)
closes: vim/vim#13958eac3fdcfa0
Problem: Looping over modifier_keys_table[] unnecessarily with only
MOD_MASK_ALT or MOD_MASK_CMD, as modifier_keys_table[] only
contains MOD_MASK_SHIFT and MOD_MASK_CTRL, and the loop won't
do anything.
Solution: Remove MOD_MASK_ALT and MOD_MASK_CMD from the condition.
(zeertzjq)
closes: vim/vim#139630c989e4a3a
The benefit of this is that users only pay for what they use. If e.g.
only `vim.lsp.buf_get_clients()` is called then they don't need to load
all modules under `vim.lsp` which could lead to significant startuptime
saving.
Also `vim.lsp.module` is a bit nicer to user compared to
`require("vim.lsp.module")`.
This isn't used for some nested modules such as `filetype` as it breaks
tests with error messages such as "attempt to index field 'detect'".
It's not entirely certain the reason for this, but it is likely it is
due to filetype being precompiled which would imply deferred loading
isn't needed for performance reasons.
Problem: Code is indented more than necessary.
Solution: Use an early return where it makes sense. (Yegappan Lakshmanan,
closesvim/vim#11813)
e857598896
Skip list_alloc_with_items().
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Code is indented too much.
Solution: Use an early return. (Yegappan Lakshmanan, closesvim/vim#11756)
87c1cbbe98
Omit free_eval_tofree_later(): Vim9 script only.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem:
Processing non-fast events during SystemObj:wait() may cause two pieces
of code to interfere with each other, and is different from jobwait().
Solution:
Don't process non-fast events during SystemObj:wait().
Problem: Erroring when both {range} and {code} are supplied to
:lua is inconvenient and may break mappings.
Solution: Don't error, ignore {range} and execute {code} when both
are supplied.
runtime(vim): Improve keymap file highlighting (vim/vim#13550)
- Match :loadkeymap to EOF as a region and contain only allowed items.
- Add highlighting for <Char- notation.
- add basic syntax highlighting tests
69866449dd
N/A patches:
vim-patch:35928ee8f80ea721e92bb856c8ecde2cced46bb9
vim-patch:b5352931b354eb67eb7d223cc09c98dcf1b547b6
Co-authored-by: dkearns <dougkearns@gmail.com>
- Consistently use the variable CMAKE_BUILD_TYPE to select build type.
- Remove broken `doc_html` target.
- Remove swap files created by oldtest when cleaning.
- Only rerun `lintdoc` if any documentation files has changed.
runtime(racket): add missing space to b:undo_indent var (vim/vim#13945)
This copies commit 2a4862a (fixup! indent: only reset some options when
has vim9, 2024-01-31) from https://github.com/benknoble/vim-racket and
fixes 26b0176a9 (runtime(racket): undo some indent options only when
vim9script is available (vim/vim#13935), 2024-01-30).
83f627ff42
Co-authored-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Problem: Crash when using gettabwinvar() with invalid arguments. (Yilin
Yang)
Solution: Use "curtab" if "tp" is NULL. (closesvim/vim#5475)
ee93b737aa
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Segfault with CompleteChanged autocommand
(markonm )
Solution: Test match->cp_prev for being NULL before accessing it
closes: vim/vim#13929fef6630166
Co-authored-by: Christian Brabandt <cb@256bit.org>
- Add type annotations, fix most of the type warnings.
- Fix a minor bug on `spell_ignore_files`: nil error when an invalid
spelling is found but the file is not ignored.
Problem: UX of visual highlighting can be improved
Solution: Improve readibility of visual highlighting,
by setting better foreground and background
colors
The default visual highlighting currently is nice in that it overlays
the actual syntax highlighting by using a separate distinct background
color.
However, this can cause hard to read text, because the contrast
between the actual syntax element and the background color is way too
low. That is an issue, that has been bothering colorschemes authors for
quite some time so much, that they are defining the Visual highlighting
group to use a separate foreground and background color, so that the
syntax highlighting vanishes, but the text remains readable (ref:
vim/colorschemesvim/vim#250)
So this is an attempt to perform the same fix for the default Visual
highlighting and just use a default foreground and background color
instead of using reverse.
I also removed the hard-coded changes to the Visual highlighting in
init_highlight. It's not quite clear to me, why those were there and not
added directly to the highlighting_init_<dark|light> struct.
closes: vim/vim#13663
related: vim/colorschemes#250e6d8b4662d
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(vim): Update syntax and ftplugin files (vim/vim#13924)
Improve matching of line-continuations and interspersed comments.
These are now also matched in multiline syntax command patterns,
dictionary literals, and parenthesised expressions and argument lists.
21ce159e05
Co-authored-by: dkearns <dougkearns@gmail.com>
The "priority" field of extmarks can be used to set priorities of
extmarks which dictates which highlight group a range will actually have
when there are multiple extmarks applied. However, when multiple
extmarks have the same priority, the only way to enforce an actual
priority is through the order in which the extmarks are set.
It is not always possible or desirable to set extmarks in a specific
order, however, so we add a new "subpriority" field that explicitly
enforces the ordering of extmarks that have the same priority.
For now this will be used only to enforce priority of treesitter
highlights. A single node in a treesitter tree may match multiple
captures, in which case that node will have multiple extmarks set. The
order in which captures are returned from the treesitter API is not
_necessarily_ in the same order they are defined in a query file, so we
use the new subpriority field to force that ordering.
For now subpriorites are not documented and are not meant to be used by
external code, and it only applies to ephemeral extmarks. We indicate
the "private" nature of subpriorities by prefixing the field name with
an "_".
Problem:
- Navigation is not always symmetric: pressing Ctrl+o n times followed
by Ctrl+i n times does not always gets me back to where I started.
- Invalid buffers are not skipped by Ctrl+i/o, I have to press Ctrl+i/o
multiple times to get to the next/previous buffer.
Solution:
- Remove all entries of a buffer from the jump list when deleting it.
- Don't add a new entry to the jump list if the next buffer to be
displayed is already in the jump list.
Closes#25365
Problem: Recorded register cannot be translated using keytrans() when
it involves character search (iddqd505)
Solution: Record a K_IGNORE instead of a K_NOP (zeertzjq)
related: vim/vim#13916closes: vim/vim#13925bf321806bf
Problem:
If `neovim` module is not installed, python and ruby healthchecks fail:
- ERROR Failed to run healthcheck for "provider.python" plugin. Exception:
.../runtime/lua/provider/python/health.lua:348: attempt to concatenate local 'pyname' (a nil value)
- ERROR Failed to run healthcheck for "provider.ruby" plugin. Exception:
.../runtime/lua/provider/ruby/health.lua:25: attempt to index local 'host' (a nil value)
Solution:
Check for non-nil.
Github Issue template:
- Add pointers to |dev-tools-backtrace|.
- Add pointers to CONTRIBUTING.md (Reporting Problems), which includes
additional helpful instructions for issue reporting.
- Search existing issues: include label `bug-crash` as well as `bug`.
CONTRIBUTING.md:
- Fix broken link on "stacktrace" after moving to help from wiki.
Summary: Separate the lint job (`make lintdoc`) to validate runtime/doc,
it is no longer as a part of functionaltest (help_spec).
Build (cmake) and CI:
- `make lintdoc`: validate vimdoc files and test-generate HTML docs.
CI will run this as a part of the "docs" workflow.
- `scripts/lintdoc.lua` is added as an entry point (executable script)
for validating vimdoc files.
scripts/gen_help_html.lua:
- Move the tests for validating docs and generating HTMLs from
`help_spec.lua` to `gen_help_html`. Added:
- `gen_help_html.run_validate()`.
- `gen_help_html.test_gen()`.
- Do not hard-code `help_dir` to `build/runtime/doc`, but resolve from
`$VIMRUNTIME`. Therefore, the `make lintdoc` job will check doc files
on `./runtime/doc`, not on `./build/runtime/doc`.
- Add type annotations for gen_help_html.
Problems:
1. The test case for querying truecolor support did not check which
capabilities were queried
2. The test case for querying truecolor support checked `&termguicolors`
in the Nvim test runner, not the child Nvim in the the embedded
terminal
3. The test case for querying truecolor support did not actually respond
to the XTGETTCAP requests. `'termguicolors'` is still enabled even
without responding to this query because libvterm understands and
responds to the DECRQSS request, but it is still good to respond to
the query explicitly instead of depending on hidden libvterm behavior
4. No test case exists at all for OSC 52
Solution:
Fix all of the problems listed above.
Problem: E95 is possible if a buffer called "[Command Line]" already
exists when opening the cmdwin. This can also happen if the
cmdwin's buffer could not be deleted when closing.
Solution: Un-name the cmdwin buffer, and give it a special name instead,
similar to what's done for quickfix buffers and for unnamed
prompt and scratch buffers. As a result, BufFilePre/Post are
no longer fired when opening the cmdwin. Add a "command" key
to the dictionary returned by getbufinfo() to differentiate
the cmdwin buffer instead. (Sean Dewar)
Cherry-pick test_normal changes from v9.0.0954.
1fb4103206
Problem: Autocmds triggered from opening the cmdwin (in win_split and
do_ecmd) can cause issues such as E199, as the current checks
are insufficient.
Solution: Commands executed from the cmdwin apply to the old curwin/buf,
so they should be kept in a "suspended" state; abort if
they've changed. Also abort if cmdwin/buf was tampered with,
and check that curwin is correct. Try to clean up the cmdwin
buffer (only if hidden and non-current to simplify things; the
same approach is used when closing cmdwin normally), and add a
beep. (Sean Dewar)
Rename the old Test_cmdwin_interrupted() like in the patch (can be moved to
test_cmdwin.vim when v9.0.0027 is ported).
Move the error message to `e_active_window_or_buffer_changed_or_deleted`.
43b395ec2e
Problem: Things that temporarily change/restore curwin/buf (e.g:
win_execute, some autocmds) may break assumptions that
curwin/buf is the cmdwin when "cmdwin_type != 0", causing
issues.
Solution: Expose the cmdwin's real win/buf and check that instead. Also
try to ensure these variables are NULL if "cmdwin_type == 0",
allowing them to be used directly in most cases without
checking cmdwin_type. (Sean Dewar)
Reset and save `cmdwin_old_curwin` in a similar fashion.
Apply suitable changes for API functions and add Lua tests.
988f74311c
strrchr returns null pointer if '.' is not present in file name. Notice
that filenames are filtered to match "doc/*.??[tx]" pattern earlier so
we shouldn't expect null pointer here. However later in code strrchr
return value is checked so it seems better and more consistent to do the
same here too.
runtime(ant): Update syntax file (vim/vim#13926)
Remove invalid display option from syn-keyword commands.
Take over maintenance of this file.
0cc6108fea
Co-authored-by: dkearns <dougkearns@gmail.com>
The data.sh.url field is valid only when item.kind is
kDecorKindHighlight. The `if` block just before this line already does
that check (as well as checking `active`) so move the access of
`data.sh.url` into that block.
Problem: Marks moved by undo may be lost to "b_signcols.count".
Solution: Count signs for each undo object separately instead of
once for the entire undo.
Problem: Cannot map Super Keys in GTK UI
(Casey Tucker)
Solution: Enable Super Key mappings in GTK using <D-Key>
(Casey Tucker)
As a developer who works in both Mac and Linux using the same keyboard,
it can be frustrating having to remember different key combinations or
having to rely on system utilities to remap keys.
This change allows `<D-z>` `<D-x>` `<D-c>` `<D-v>` etc. to be recognized
by the `map` commands, along with the `<D-S-...>` shifted variants.
```vimrc
if has('gui_gtk')
nnoremap <D-z> u
nnoremap <D-S-Z> <C-r>
vnoremap <D-x> "+d
vnoremap <D-c> "+y
cnoremap <D-v> <C-R>+
inoremap <D-v> <C-o>"+gP
nnoremap <D-v> "+P
vnoremap <D-v> "-d"+P
nnoremap <D-s> :w<CR>
inoremap <D-s> <C-o>:w<CR>
nnoremap <D-w> :q<CR>
nnoremap <D-q> :qa<CR>
nnoremap <D-t> :tabe<CR>
nnoremap <D-S-T> :vs#<CR><C-w>T
nnoremap <D-a> ggVG
vnoremap <D-a> <ESC>ggVG
inoremap <D-a> <ESC>ggVG
nnoremap <D-f> /
nnoremap <D-g> n
nnoremap <D-S-G> N
vnoremap <D-x> "+x
endif
```
closes: vim/vim#1269892e90a1e10
Co-authored-by: Casey Tucker <dctucker@hotmail.com>
Problem: Incorrect number of trailing spaces inserted for multibyte
characters when pasting a blockwise register in blockwise visual
mode (VanaIgr)
Solution: Skip over trailing UTF-8 bytes when computing the number of trailing
spaces (VanaIgr)
When pasting in blockwise visual mode, and the register type is <CTRL-V>, Vim
aligns the text after the replaced area by inserting spaces after pasted
lines that are shorter than the longest line. When a shorter line contains
multibyte characters, each trailing UTF-8 byte's width is counted in addition
to the width of the character itself. Each trailing byte counts as being 4
cells wide (since it would be displayed as <xx>).
closes: vim/vim#139096638ec8afa
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
Problem: 'linebreak' may still apply to leading whitespace
(VanaIgr)
Solution: Compare pointers instead of virtual columns.
(zeertzjq)
related: #27180closes: vim/vim#13915703f9bc943
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
Problem: formatting long lines is slow
(kawaii-Code)
Solution: optimize gq (internal_format) for long
lines (kawaii-Code)
Implemented two workarounds that significantly reduce
the amount of pointless calls. Ideally the algorithm
would be rewritten not to be n^2, but it's too complicated
with too many corner cases.
closes: vim/vim#1391478019df645
Co-authored-by: kawaii-Code <nia.personal.0@gmail.com>
Problem: Currently default color scheme defines most of treesitter
highlight groups. This might be an issue for users defining their own
color scheme as it breaks the "fallback property" for some of groups.
Solution: Define less default treesitter groups; just enough for default
color scheme to be useful. That is:
- All first level groups (`@character`, `@string`, etc.).
- All `@xxx.builtin` groups as a most common subgroup.
- Some special cases (links/URLs, `@diff.xxx`, etc.).
Problem: Some core syntax highlight groups are cleared with intention to
always be shown without additional highlighting. This doesn't always
work as intended, especially with fallback mechanism of @-groups.
Example: `Statement`/`Keyword` group shown in help code blocks
(`@markup.raw`) is shown as bold (from `Statement`) cyan (from
`@markup.raw`) instead of bold grey.
Solution: Explicitly use normal grey foreground in syntax groups where
it was previously implicitly assumed.
Extmarks can contain URLs which can then be drawn in any supporting UI.
In the TUI, for example, URLs are "drawn" by emitting the OSC 8 control
sequence to the TTY. On terminals which support the OSC 8 sequence this
will create clickable hyperlinks.
URLs are treated as inline highlights in the decoration subsystem, so
are included in the `DecorSignHighlight` structure. However, unlike
other inline highlights they use allocated memory which must be freed,
so they set the `ext` flag in `DecorInline` so that their lifetimes are
managed along with other allocated memory like virtual text.
The decoration subsystem then adds the URLs as a new highlight
attribute. The highlight subsystem maintains a set of unique URLs to
avoid duplicating allocations for the same string. To attach a URL to an
existing highlight attribute we call `hl_add_url` which finds the URL in
the set (allocating and adding it if it does not exist) and sets the
`url` highlight attribute to the index of the URL in the set (using an
index helps keep the size of the `HlAttrs` struct small).
This has the potential to lead to an increase in highlight attributes
if a URL is used over a range that contains many different highlight
attributes, because now each existing attribute must be combined with
the URL. In practice, however, URLs typically span a range containing a
single highlight (e.g. link text in Markdown), so this is likely just a
pathological edge case.
When a new highlight attribute is defined with a URL it is copied to all
attached UIs with the `hl_attr_define` UI event. The TUI manages its own
set of URLs (just like the highlight subsystem) to minimize allocations.
The TUI keeps track of which URL is "active" for the cell it is
printing. If no URL is active and a cell containing a URL is printed,
the opening OSC 8 sequence is emitted and that URL becomes the actively
tracked URL. If the cursor is moved while in the middle of a URL span,
we emit the terminating OSC sequence to prevent the hyperlink from
spanning multiple lines.
This does not support nested hyperlinks, but that is a rare (and,
frankly, bizarre) use case. If a valid use case for nested hyperlinks
ever presents itself we can address that issue then.
- remove "ran-" prefix from touch files as it's redundant since the
they're already in the directory named `touches`.
- Include `contrib` when formatting with `make formatlua`.
- Use TARGET_FILE generator expression instead of assuming the
executable location.
- reuse logic that determines whether to use lua or luajit.
- add translations to the `nvim` target.
Makefile improvements:
- rename variable `CMAKE_PRG` to `CMAKE` to make it more consistent with
the builtin `MAKE` variable.
- stop propagating flags to generator. Users should use cmake for
non-standard use cases.
- remove `+` prefix from targets. If the user for whatever reason wants
to dry-run a target then they should be able to.
runtime(vim): Update syntax file (vim/vim#13906)
Highlight :2match and :3match and add these to :help ex-cmd-index.
9c5b90db03
Co-authored-by: dkearns <dougkearns@gmail.com>
Docs for treesitter would benefit from including more real-world and
practical examples of queries and usages, rather than hypothetical ones
(e.g. names such as "foo", "bar"). Improved examples should be more
user-friendly and clear to understand.
In addition, align the capture names in some examples with the actual
ones being used in the built-in query files or in the nvim-treesitter
plugin, e.g.:
- `@parameter` -> `@variable.parameter`
- `@comment.doc.java` -> `@comment.documentation.java`
- etc.
Problem:
APIs get wrong boolean option default values on big-endian platforms.
Solution:
Use a union for def_val.
Cannot use OptVal or OptValData yet as it needs to have the same types
as option variables.
runtime(doc): change "VIsual mode" to "Visual mode" in :h SafeState (vim/vim#13901)
"Visual mode" is used everywhere else in the help when not referring to
something in the source code.
e13b665a6e
Problem: vim.diagnostic.{underline,float,virtual_text...}.severity
will have a type warning on list-like or table (min-max) inputs,
e.g. `vim.diagnostic.config { float = { severity = { min = INFO } } }`.
Solution: Correct the typing as documented in |diagnostic-severity|.
* use `Special` as default for `@markup.*`, especially `@markup.raw` and
`@markup.math` (`@markup` itself is never used)
* use `Structure` for `@markup.environment`
* highlight all of `@markup.link` as Underlined (otherwise concealed
links are invisible)
Problem: ml_get: invalid lnum when :s replaces visual selection
(@ropery)
Solution: substitute may decrement the number of lines in a buffer,
so validate, that the bottom lines of the visual selection
stays within the max buffer line
fixes: vim/vim#13890closes: vim/vim#138927c71db3a58
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(sh): Add handling for ksh93 shared-state comsubs and mksh valsubs (vim/vim#13884)
This commit adds support for ksh93 shared-state command
substitutions (syntax: ${ command; }) and mksh's value
substitutions (syntax: ${|command;}) in the sh syntax script.
Also add a syntax test for ksh subshares with dumps included
to make sure it doesn't regress.
fixes: vim/vim#9514add31baeda
Co-authored-by: Johnothan King <johnothanking@protonmail.com>
This expands on the global "don't pay for what you don't use" rules for
these special extmark decorations:
- inline virtual text, which needs to be processed in plines.c when we
calculate the size of text on screen
- virtual lines, which are needed when calculating "filler" lines
- signs, with text and/or highlights, both of which needs to be
processed for the entire line already at the beginning of a line.
This adds a count to each node of the marktree, for how many special
marks of each kind can be found in the subtree for this node. This makes
it possible to quickly skip over these extra checks, when working in
regions of the buffer not containing these kind of marks, instead of
before where this could just be skipped if the entire _buffer_
didn't contain such marks.
Using CMAKE_INSTALL_PREFIX is unreliable as it's a cache variable,
meaning the users previous value will be used if not supplied. Instead,
use the `--prefix` flag which is guaranteed to always work.
'foldtext' can be set to an empty string to disable and render the
line with:
- extmark highlight
- syntax highlighting
- search highlighting
- no line wrapping
- spelling
- conceal
- inline virtual text
- respects `fillchars:fold`
Currently normal virtual text is not displayed
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
perf: make screen size and position calculations more efficient
N/A patches for version.c:
vim-patch:9.1.0037: Calling get_breakindent_win() repeatedly when computing virtcol
vim-patch:9.1.0038: Unnecessary loop in getvcol()
When computing on-screen size or position, the size 'breakindent' and 'showbreak' is now cached,
and checks for whether a faster character size function can be used are performed only once at the start.
Multibyte characters are not decodes multiple times anymore, and character decoding functions are more efficient.
Additionally, the amount of trailing spaces for pasted blockwise text is now calculated correctly for multibyte characters.
Internal lisp formatting now doesn't erroneously use inline virtual text from a different line.
The optimized virtual column calculation loop in getvcol()
was decoding the current character twice: once in ptr2cells()
and the second time in utfc_ptr2len(). For combining charcters, they were
decoded up to 2 times in utfc_ptr2len(). Additionally, the function used to
decode the character could be further optimised.
Problem:
rbuffer_consumed assertion fails if Unpacker fails to parse msgpack,
because it doesn't consume bytes on errors
Solution:
Call rbuffer_consumed_compact only if Unpacker isn't closed
cmake -E copy_directory behaves differently depending on if the
directory in question exists or not. Always create it to ensure it
behaves consistently.
- Problem: One cannot easily write something like, for example:
`version_current >= {0, 10, 0}`; writing like
`not vim.version.lt(version_current, {0, 10, 0})` is verbose.
- Solution: add {`le`,`ge`} in addition to {`lt`,`gt`}.
- Also improve typing on the operator methods: allow `string` as well.
- Update the example in `vim.version.range()` docs: `ge` in place of
`gt` better matches the semantics of `range:has`.
Problem: Missing test for Chuck filetype
after commit 27a4632af6753
(Christian Clason)
Solution: Add a filetype test
c1884c94c5
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Sharing queries with upstream and Helix is difficult due to
different capture names.
Solution: Define and document a new set of standard captures that
matches tree-sitter "standard captures" (where defined) and is closer to
Helix' Atom-style nested groups.
This is a breaking change for colorschemes that defined highlights based
on the old captures. On the other hand, the default colorscheme now
defines links for all standard captures (not just those used in bundled
queries), improving the out-of-the-box experience.
This distinction is important for correct dependency management, as the
nvim binary is used to create some runtime files. The nvim binary (and
the target to build it) is thus called `nvim_bin` and the target to
build all of nvim (binary+runtime) is called `nvim`.
When an embedded Nvim instance changes its current directory a "chdir"
UI event is emitted. Attached UIs can use this information however they
wish. In the TUI it is used to synchronize the cwd of the TUI process
with the cwd of the embedded Nvim process.
Problem:
On devel(nightly) versions, deprecation warnings for hard-deprecated
features are not being displayed. E.g.,
- to be removed in: 0.11
- hard-deprecation since 0.10
- soft-deprecation since 0.9
then 0.10-nightly (0.10.0-dev) versions as well as 0.10.0 (stable)
should display the deprecation warning message.
Solution:
Improve the code and logic on `vim.deprecate()`, and improve
test cases with mocked `vim.version()`.
There are various other ways people can mimic the old commands, and
plenty of people that have never heard of the old commands.
This increases the consistency of the whole document by restricting it
to the scope to installation of Nvim and its CLI commands.
The function computed the start of the multibyte character and iterated
until the current character reached this position. The loop at the start of the function
handed the case where the index passed to the function was past the end of the line.
This loop can be removed if the function instead compares the next position against
the end position end exits the loop if it is greater than the end position.
breakindent was recomputed on every call to win_lbr_charbabsize() when the character
is past the end of the first row of a wrapped line. Even though the function for computing
breakindent cached the last result, reusing the cached value required strcmp of the cached line with the given line.
Problem: Parsed language annotations can be random garbage so
`nvim_get_runtime_file` throws an error.
Solution: Validate that `alias` is a valid language name before trying
to find a parser for it.
`win_line()` previously used a conspicuous `ptrdiff_t v` variable in many different
places for different reasons. The change encapsulates those uses and
introduces local variables in each with a reduced scope.
Also add `const` to some fields in winlinevars_T.
runtime(i3config): remove always from `focus_follows_mouse`
The always option does not exist in i3, only sway.
From https://i3wm.org/docs/userguide.html:
`focus_follows_mouse yes|no`
Version number incremented by 2 because the last commit did not
increment the version.
a39af02904
Co-authored-by: James Eapen <james.eapen@vai.org>
Problem: Modifying a hidden buffer still interferes with prompt buffer
mode changes.
Solution: Save and restore b_prompt_insert.
(zeertzjq)
closes: vim/vim#13875
Modifying hidden buffer still interferes with prompt buffer mode changes
f267847017
Problem: too vague errors for 'listchars'/'fillchars'
Solution: Include the field name in error message.
(zeertzjq)
related: #27050closes: vim/vim#138776a8d2e1634
Co-authored-by: Cole Frankenhoff <cole.nhf@gmail.com>
Translate the Vim9 script Godot files to legacy.
`<scriptcmd>` is not ported yet, so replace it with `<Cmd>` and `<SID>`.
If it's ported, `<scriptcmd>call s:` can be used instead.
Includes changes from:
vim-patch:0daafaa7d99e (was partial, but is now pretty much fully ported)
vim-patch:9712ff1288f9
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: Wrong "clear" argument passed to buf_signcols_count_range
when initializing "b_signcols.count" for the first time.
Solution: Pass kFalse so that the "nested" counter is not incorrectly
decremented.
Problem: Insert mode not stopped if an autocommand modifies a hidden
buffer while closing a prompt buffer.
Solution: Don't set b_prompt_insert if stop_insert_mode is already set.
(zeertzjq)
closes: vim/vim#1387296958366ad
* vim-patch:9.1.0035: i_CTRL-] triggers InsertCharPre
Problem: i_CTRL-] triggers InsertCharPre
Solution: Return if CTRL-] is received. InsertCharPre
is supposed to be only used for chars to be inserted
but i_CTRL-] triggers expansion and is not inserted
into the buffer (altermo)
closes: vim/vim#13853closes: vim/vim#138647d711fe209
runtime(odin): include ftplugin, syntax and indent script (vim/vim#13867)
211211052d
Translate the files from Vim9 script to legacy Vim script. Notably:
- Prefer case-matching comparisons where needed.
- Save and restore `&cpo`.
- Make the functions script-local. (Pretty easy to use these in expr options now
since Vim 9.0 anyways)
Add a note after the header for each file stating that they're manually
translated.
Co-authored-by: Maxim Kim <habamax@gmail.com>
This function is used only in the `workspace/configuration` handler,
and does not warrant a public API because of its confusing return types.
The only caller `vim.lsp.handlers["workspace.configuration"]` is also
refactored to use `vim.tbl_get()` instead.
Problem: Modula2 filetype support lacking
Solution: Improve the Modula-2 runtime support, add additional modula2
dialects, add compiler plugin, update syntax highlighting,
include syntax tests, update Makefiles (Doug Kearns)
closes: vim/vim#6796closes: vim/vim#811568a8947069
- Luaify the detection script:
- Split the `(*!m2foo*)` and `(*!m2foo+bar*)` detection into two Lua patterns,
as Lua capture groups cannot be used with `?` and friends (as they only work
on character classes).
- Use `vim.api.nvim_buf_call()` (ew) to call `modula2#SetDialect()` to ensure
`b:modula2` is set for the given bufnr.
- Skip the syntax screendump tests. (A shame as they test some of the detection
from `(*!m2foo+bar*)` tags, but I tested this locally and it seems to work)
- Port the synmenu.vim changes from Vim9 script. (Also tested this locally)
- (And also add the missing comma for `b:browsefilter` from earlier.)
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: The 'statuscolumn' is not redrawn on the wrapped part of a
line when moving the cursor with 'relativenumber' set.
Solution: Redraw the 'statuscolumn' for the entire line height in the
"col_rows" win_line() code path.
runtime(fortran): update fortran syntax (vim/vim#13870)
Support most remaining features of Fortran 2018/2023
Small improvements to folding etc,
Code cleanup: use \? instead of mix of \= and \?
ef79c57837
Co-authored-by: Ajit-Thakkar <142174202+Ajit-Thakkar@users.noreply.github.com>
Problem: When the stable bot automatically closes an issue, the issue
will be marked as "closed as completed". It'd be better to mark the
as "closed as not planned".
Solution: Use `state_reason: "not_planned"` from the issues REST API.
References (REST API):
https://docs.github.com/en/rest/issues/issues?apiVersion=2022-11-28#update-an-issue
Problem: Vim is missing a foreach() func
Solution: Implement foreach({expr1}, {expr2}) function,
which applies {expr2} for each item in {expr1}
without changing it (Ernie Rael)
closes: vim/vim#12166e79e207760
Partial port as this doesn't handle non-materialized range() lists.
vim-patch:c92b8bed1fa6
runtime(help): delete duplicate help tag E741 (vim/vim#13861)
c92b8bed1f
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Cannot easily get the list of matches
Solution: Add the matchstrlist() and matchbufline() Vim script
functions (Yegappan Lakshmanan)
closes: vim/vim#13766
Omit CHECK_LIST_MATERIALIZE(): it populates a List with numbers only,
and there is a check for strings below.
f93b1c881a
vim-patch:eb3475df0d92
runtime(doc): Replace non-breaking space with normal space (vim/vim#13868)
eb3475df0d
Co-authored-by: Yegappan Lakshmanan <4298407+yegappan@users.noreply.github.com>
Coverity warns about a possible null pointer dereference in the `memcpy`
call in `kv_concat_len`. The `memcpy` follows `kv_ensure_space` which
(re)allocates the `items` pointer if the vector's capacity is not large
enough to contain all of the items being appended. The only way `items`
would be NULL at this point is if `capacity` were mistakenly set to some
large number without `items` ever having being set in the first place.
This should not happen when using the kvec API so if this condition is
ever false it is a bug, which the `assert` will catch.
The motivation for this update is Issue #15365, where background=light
is not properly set for Nvim running from an Nvim :terminal. This can be
encountered when e.g., opening a terminal to make git commits, which
opens EDITOR=nvim in the nested terminal.
Under the implementation of this commit, the OSC response always
indicates a black or white foreground/background. While this may not
reflect the actual foreground/background color, it permits 'background'
to be retained for a nested Nvim instance running in the terminal
emulator. The behaviour matches Vim.
runtime(ftplugin): Use "*" browsefilter pattern to match "All Files"
Problem: The "*.*" browsefilter pattern only matches all files on
Windows (Daryl Lee)
Solution: Use "*" to filter on all platforms but keep "*.*" as the label
text on Windows. (Fixesvim/vim#12685, Doug Kearns)
The *.* browsefilter pattern used to match "All Files" on Windows is a
legacy of the DOS 8.3 filename wildcard matching algorithm. For reasons
of backward compatibility this still works on Windows to match all
files, even those without an extension.
However, this pattern only matches filenames containing a dot on other
platforms. This often makes files without an extension difficult to
access from the file dialog, e.g., "Makefile"
On Windows it is still standard practice to use "*.*" for the filter
label so ftplugins should use "All Files (*.*)" on Windows and "All
Files (*)" on other platforms. This matches Vim's default browsefilter
values.
This commit also normalises the browsefilter conditional test to check
for the Win32 and GTK GUI features and an unset b:browsefilter.
closes: vim/vim#1275993197fde0f
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Some edge cases to the old (pre-#26406) and current "b_signcols"
structure result in an incorrectly sized "auto" 'signcolumn'.
Solution: * Implement a simpler 'signcolumn' validation strategy by immediately
counting the number of signs in a range upon sign insertion and
deletion. Decrease in performance here but there is a clear path
forward to decreasing this performance hit by moving signs to a
dedicated marktree, or by adding meta-data to the existing
marktree which may be queried more efficiently?
* Also replace "max_count" and keep track of the number of lines with
a certain number of signs. This makes it so that it is no longer
necessary to scan the entire buffer when the maximum number of signs
decreases. This likely makes the commit a net increase in performance.
* To ensure correctness we also have re-initialize the count for an
edited region that spans multiple lines. Such an edit may move the
signs within it. Thus we count and decrement before splicing the
marktree and count and increment after.
Problem: Any preceding luadocs block that define alias types with
`@alias` magic would be prepended to the documentation of functions
that follow, despite the "blank line" separator. For example:
```
--- @alias some.type.between.functions
--- Blah blah long documentation for alias
--- | "foo" # foo
--- | "bar" # bar
--- The documentation that should appear in vimdoc.
function M.function_to_include_in_doc()
...
end
```
then the vimdoc generated for `function_to_include_in_doc` would include
the text from the alias block (e.g., "Blah blah ... for alias").
Solution:
- refactor: Lua2DoxFilter should maintain its own internal state
`generics`, rather than carrying it as a parameter to local helper
functions.
- Add another boolean state `boolean_state` which represents whether
to ignore the current docstring block (magic lines). This flag will
be reset as soon as the block is end.
Note: As expected, there is no change at all in the current docs
generated, because we have been working around and writing luadoc
comments so that such erroneous docstring resulting from preceding
`@alias` blocks won't appear.
- Add section `VIM.LPEG` and `VIM.RE` to docs/lua.txt.
- Add `_meta/re.lua` which adds luadoc and type annotations, for the
vendored `vim.re` package.
- Fix minor style issues on `_meta/lpeg.lua` luadoc for better vimdocs
generation.
- Fix a bug on `gen_vimdoc` where non-helptags in verbatim code blocks
were parsed as helptags, affecting code examples on `vim.lpeg.Cf`,
etc.
- Also move the `vim.regex` section below so that it can be located
closer to `vim.lpeg` and `vim.re`.
Typings introduced in #26032 and #26552 have a few conflicts, so we
merge and clean them up. We also fix some incorrect type annotation in
the `vim.lsp.rpc` package. See the associated PR for more details.
Summary:
- vim.rpc.Dispatchers -> vim.lsp.rpc.Dispatchers
- vim.lsp.rpc.Error -> lsp.ResponseError
- Revise docs
Problem: Current values of `StatusLine` and `StatusLineNC` are currently
designed to be visually distinctive while being not intrusive.
However, the compromise was more shifted towards "not intrusive".
After the feedback, statusline highlight groups should be designed to:
- Make current window clearly noticeable. Meaning `StatusLine` and
`StatusLineNC` should obviously differ.
- Make non-current windows clearly separable. Meaning `StatusLineNC`
and `Normal`/`NormalNC` should obviously differ.
Solution:
- Update `StatusLineNC` to have more visible background.
- Update `StatusLine` to be inverted variant of `StatusLineNC`.
- Update `WinBar` and `WinBarNC` to not link to `StatusLine` and
`StatusLineNC` because it makes two goals harder to achieve.
- Update `TabLine` to link to `StatusLineNC` instead of `StatusLine`
to not be very visually intrusive.
Problem: Decor range is being redrawn unconditionally, negating the
more conservative line redrawing that follows.
Solution: Get rid of unconditional redraw_buf_range_later() call.
Problem: Coverity complains about improper use of negative value
Solution: Add a condition to validate that keytyped is larger or equal
to 0
Apparently patch 9.1.0006 made it more explicit for Coverity, that the
TOLOWER_LOC() macros do not handle negative values properly. However,
that condition has always been there even before that, so add a
condition to verify that keytyped is indeed at least 0
closes: vim/vim#1382449471963fe
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: i_CTRL-R- doesn't work for multibyte chars in Replace mode,
Coverity complains missing return value for u_save_cursor()
Solution: Use mb_charlen() and del_chars() instead, handle failure mode
for u_save_cursor() correctly (@zeertzjq)
closes: vim/vim#13846424ec1f235
Problem: i_CTRL-R- no longer works in replace mode
Solution: delete characters in replace mode before putting, add a test,
add a bit warning into the documentation, that i_CTRL-R-P/O
is not supported in Replace mode for now
fixes: vim/vim#13792closes: vim/vim#138165d5cbb2b9a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Deleted lines go to wrong yank register.
Solution: Reset y_append when not calling get_yank_register(). (Christian
Brabandt, closesvim/vim#8872)
78eb9cce91
Nvim has removed y_append static variable and already works as expected.
Co-authored-by: Christian Brabandt <cb@256bit.org>
* fix(flake): clang-tools moved to nativeBuildInputs
Buildtime binaries should go in `nativeBuildInputs`
Before `clang-tools` version was overwriten breaking the Lsp.
Relevant issues:
https://github.com/NixOS/nixpkgs/issues/76486
* remove cmake, available in the nixpkgs derivation
runtime(netrw): Decode multibyte percent-encoding filename correctly (vim/vim#13842)
Use `printf("%c")` instead of `nr2char()` to handle '%xx' as a byte.
Closevim/vim#137872357765304
Co-authored-by: K.Takata <kentkt@csc.jp>
runtime(colorschemes): Add initial support for Added/Removed/Changed highlight groups (vim/vim#13830)
For some of the colorschemes where diffAdded and diffRemoved were explicitly set up.
5f4cc8ea65
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: default diff highlighting is too noisy
Solution: Link diff highlighting groups to new
Added/Removed/Changed, revert previous change
(Romain Lafourcade)
Remove diff* links added in vim/vim#13776 and doc added in commit b1392be
The links added in vim/vim#13776 are way too noisy for the contexts in which
the `diff` syntax is applied (git commits, patches, etc.).
This commit:
- removes those links
- adds new default highlighting groups Added, Changed and
Removed
- links the diff highlighting groups to those new defaults
- removes the doc changes
- adjusts the syntax_completion test for those newly added group
names
Note: Changes to the default color schemes will be handled separately,
by adding links to those newly created Added/Removed/Changed
highlighting groups.
related: vim/vim#13776closesvim/vim#13825124371c5a1
Co-authored-by: Romain Lafourcade <romain.lafourcade@razorfish.fr>
Problem: regexp cannot match combining chars in collection
Solution: Check for combining characters in regex collections for the
NFA and BT Regex Engine
Also, while at it, make debug mode work again.
fixesvim/vim#10286closes: vim/vim#12871d2cc51f9a1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Remove `export` pramgas from defs headers as it causes IWYU to believe
that the definitions from the defs headers comes from main header, which
is not what we really want.
grid_put_linebuf() used grid_clear() internally to handle clearing the
left part of a rightleft line. By reimplementing that internally, we
can instead use grid_put_linebuf() as the implementation of
grid_clear(), which in the end is a net reduction of code as grid_fill()
is used for nothing else.
win_draw_end: Implement "draw_margin" on a per-row basis which closer reflects how
terminals work. Also use the magic mirror for 'rightleft'
This commit implements a new TermRequest autocommand event and has Neovim
emit this event when children of terminal buffers emit an OSC or DCS sequence
libvterm does not handle.
The TermRequest autocommand event has additional data in the
v:termrequest variable.
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Some lines in the generated vim doc are overflowing, not
correctly wrapped at 78 characters. This happens when docs body contains
several consecutive 'inline' elements generated by doxygen.
Solution: Take into account the current column offset of the last line,
and prepend some padding before doc_wrap().
A bit big, but practically it was a lot simpler to change over all
fillchars and all listchars at once, to not need to maintain two
parallel implementations.
This is mostly an internal refactor, but it also removes an arbitrary
limitation: that 'fillchars' and 'listchars' values can only be
single-codepoint characters. Now any character which fits into a single
screen cell can be used.
Improve error messages for `:InspectTree`, when no parsers are available
for the current buffer and filetype. We can show more informative and
helpful error message for users (e.g., which lang was searched for):
```
... No parser available for the given buffer:
+... no parser for 'custom_ft' language, see :help treesitter-parsers
```
Also improve the relevant docs for *treesitter-parsers*.
buf is a pointer argument, not a local char array, so sizeof(buf) is just the size of a pointer type on the platform. This is always an incorrect value, but on 32-bit platforms it actually has an impact, since sizeof(buf) is just 4 and causes the buffer to get truncated.
Problem: `IncSearch` is currently linked to `Search` which makes it not
usable for its purpose of showing current match with 'incsearch' and
confirming matches after `:s///c`.
Solution: Link it to `CurSearch`.
Since execl() is a variadic function, it requries a NULL-terminal to
indicate the end of its argument list, c.f. exec(3)
> The first argument, by convention, should point to the filename
> associated with the file being executed. The list of arguments *must*
> be terminated by a null pointer
This fixes the failure seen on aarch64 and i386, due to garbage data
being considered part of the variadic arguments.
Problem: incorrect use of W_WINROW in edit.c
Solution: compare against curwin->w_height instead
Remove incorrect use of W_WINROW
In structs.h it is mentioned that w_wrow is relative to w_winrow, so
using W_WINROW doesn't make sense when comparing with window height.
This change won't lead to any observable behavior change:
The condition intends to check if there are 'scrolloff' lines between
the current cursor when the bottom of the window. When W_WINROW(curwin)
is added to curwin->w_height - 1 - get_scrolloff_value(), the condition
is instead satisfied when the cursor is on some screen line below that
position. However,
- If 'scrolloff' is smaller than half the window height, this condition
can only be satisfied when W_WINROW(curwin) == 0. And if it is not
satisfied, update_topline() does the actual scrolling.
- If 'scrolloff' is larger than half the window height, update_topline()
will put the cursor at the center of the window soon afterwards
anyway, because set_topline() now unsets VALID_TOPLINE flag starting
from 7db7bb45b0.
To put it in another way, 7db7bb45b0
makes the update_topline() just below correct the mistakes made in this
block, so this incorrect use of W_WINROW() no longer affects observable
behavior.
closes: vim/vim#12331b1ed7ec9f7
Problem: regression with empty inner blocks introduced
(after v9.1.0007)
Solution: Set correct cursor position, Check for visual mode
being active (Maxim Kim)
relates: vim/vim#13514closes: vim/vim#138193779516988
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: can select empty inner text blocks
(laurentalacoque)
Solution: make selecting empty inner text blocks an error
textobjects: Make selecting inner empty blocks an error
fixes: vim/vim#13514closes: vim/vim#13523ad4d7f446d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Keymap completion is not available
Solution: Add keymap completion (Doug Kearns)
Add keymap completion to the 'keymap' option, user commands and builtin
completion functions.
closes: vim/vim#1369281642d9d6f
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
tmux indicates its RGB support via setrgbb and setrgbf. In modern tmux
code, Tc and RGB just set setrgbb and setrgbf, so we can just check for
them.
Link: 7eb496c00c
Problem: The maximum 'statuscolumn' width and grow behavior is undocumented.
Solution: Define, use and document the maximum 'statuscolumn' width and grow behavior.
Problem:
Many decoration providers (treesitter injection highlighting, semantic
token highlighting, inlay hint) rely on the correctness of the `botline`
argument of `on_win` callback. However, `botline` can be smaller than
the actual line number of the last displayed line if some lines are
folded. In such cases, some decorations will be missing in the lines not
covered by `botline`.
Solution:
Validate `botline` when invoking `on_win`.
NOTE:
It seems that the old code was deliberately avoiding this presumably due
to performance reasons. However, I haven't experienced noticeable lag
after this change, and I believe the cost of botline computation would
be much smaller than the cost of decoration providers.
runtime(vim): Add support for <ScriptCmd> syntax (vim/vim#10686)
Adding `<ScriptCmd>` to list of angle-bracket notation syntax, just like `<Cmd>`
`<Cmd>` is already highlighted.
```vim
nnoremap <leader>o <Cmd>Oldfiles()<CR>
```
`<ScriptCmd>` is not.
80beeef0c6
Co-authored-by: dezza <402927+dezza@users.noreply.github.com>
Avoid `prevwin == curwin` when closing `curwin`
Problem: When closing the current window (or when moving it to a tabpage), the
previous window may refer to the new current window
(`winnr() == winnr('#')`) if that window is selected as the
new current window.
Solution: Set `prevwin = NULL` when switching away from an invalid `curwin` and
the target window was the `prevwin`.
(Sean Dewar)
related: vim/vim#4537closes: vim/vim#13762bf44b69d1f
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: reloading colorscheme when not changing 'background'
Solution: Check, if the background option value actually changed,
if not, return early.
Only reload colorscheme when bg is changed
Currently the highlight groups are re-initialized and the colorscheme
(if any) is reloaded anytime 'background' is set, even if it is not
changed. This is unnecessary, because if the value was not changed then
there is no need to change highlight groups or do anything with the
colorscheme. Instead, only reload the colorscheme if the value of
'background' was actually changed.
closes: vim/vim#1370083ad2726ff
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: a closing fold expression may unexpectedly start a new fold
when it should end a fold
(reported by Shota Nozaki)
Solution: if a fold hasn't started yet, do not immediately
start a new fold with level 1
(Shota Nozaki)
fixes: vim/vim#12768closes: vim/vim#137480689b87059
Co-authored-by: Shota Nozaki <emonkak@gmail.com>
Problem:
Currently `deepcopy` hashes every single tables it copies so it can be
reused. For tables of mostly unique items that are non recursive, this
hashing is unnecessarily expensive
Solution:
Port the `noref` argument from Vimscripts `deepcopy()`.
The below benchmark demonstrates the results for two extreme cases of
tables of different sizes. One table that uses the same table lots of
times and one with all unique tables.
| test | `noref=false` (ms) | `noref=true` (ms) |
| -------------------- | ------------------ | ----------------- |
| unique tables (50) | 6.59 | 2.62 |
| shared tables (50) | 3.24 | 6.40 |
| unique tables (2000) | 23381.48 | 2884.53 |
| shared tables (2000) | 3505.54 | 14038.80 |
The results are basically the inverse of each other where `noref` is
much more performance on tables with unique fields, and `not noref` is
more performant on tables that reuse fields.
Problem:
Not all Lua code is checked by stylua. Automating code-style is an
important mechanism for reducing time spent on accidental
(non-essential) complexity.
Solution:
- Enable stylua for entire `test/` directory.
- Exclude these high-churn files until this issue is resolved: https://github.com/JohnnyMorganz/StyLua/issues/829
```
test/functional/ui/decorations_spec.lua | 3560 ++++++++++++++++++++++++++++++++++++----------------
test/functional/ui/float_spec.lua | 5826 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------
test/functional/ui/multigrid_spec.lua | 1349 ++++++++++++++------
```
- Make surgical changes to these files (or add `stylua: ignore` in some
small scopes) to improve the result:
```
test/functional/vimscript/msgpack_functions_spec.lua | 1414 +++++++++++++++------
test/functional/api/buffer_spec.lua | 1389 +++++++++++----------
test/functional/api/vim_spec.lua | 2740 +++++++++++++++++++++++-----------------
```
- These "high churn" files are NOT excluded because the changes are
largely an improvement:
```
test/functional/plugin/lsp_spec.lua | 2198 ++++++++++++++++++---------------
test/functional/plugin/shada_spec.lua | 4078 +++++++++++++++++++++++++++++++++++-------------------------
test/functional/ui/cmdline_spec.lua | 1199 +++++++++++-------
test/functional/ui/popupmenu_spec.lua | 1267 +++++++++++--------
test/functional/ui/messages_spec.lua | 1643 +++++++++++++++---------
```
- TODO: how to check "all directories"? With `GLOB_DIRS *` and `/.deps/` (or
`.deps/`) in `.styluaignore`, Lua code in `.deps/` is still checked...
buf_ensure_loaded already checks `(buf->b_ml.ml_mfp != NULL)`. #25823
TODO:
- #10070#13201 All buffer-related API functions except
`nvim_buf_is_loaded` (and `nvim_buf_is_valid`?) should always call
`buf_ensure_loaded`. Because the _common case_ is that plugins expect
the buffer to "just work"—and for the uncomon, performance-sensitive
case, the script can check `nvim_buf_is_loaded` to avoid implicitly
loading a buffer.
- Update documentation to clarify the above semantics.
Since some point INCLUDE_DEPRECATED stopped working as it is usually
turned off when generating an actual vimdoc. This commit fixes this
hidden feature back again (used for devel purposes only).
Problem: main() has too much logic implemented there, too difficult to
read.
Solution: Do more OOP, introduce `Section` dataclass that stores
information about a "section", with documentation and concrete examples
about what each field and variable would mean. Extract all the lines for
rendering a section into `section.render()` pulled out of `main()`.
Problem:
For function definitions to be included in the vimdoc (formatted) and
to be exported as mpack data (unformatted), we had two internal
representations of the same function/API metadata in duplicate;
one is FunctionDoc (which was previously a dict), and the other is
doxygen XML DOM from which vimdoc (functions sections) was generated.
Solution:
We should have a single path and unified data representation
(i.e. FunctionDoc) that contains all the metadata and information about
function APIs, from which both of mpack export and vimdoc are generated.
I.e., vimdocs are no longer generated directly from doxygen XML nodes,
but generated via:
(XML DOM Nodes) ------------> FunctionDoc ------> mpack (unformatted)
Recursive Internal |
Formatting Metadata +---> vimdoc (formatted)
This refactoring eliminates the hacky and ugly use of `fmt_vimhelp` in
`fmt_node_as_vimhelp()` and all other helper functions! This way,
`fmt_node_as_vimhelp()` can simplified as it no longer needs to handle
generating of function docs, which needs to be done only in the topmost
level of recursion.
runtime(dist/ft): improve filetype detection for *.v (V/Verilog/Coq)
Patch provided by Dan Alt
closes: vim/vim#1379310b4f75d4c
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(sh): Update sh syntax and add local keyword for bash (vim/vim#13806)
add `local` in shStatement
b16fc98055
Co-authored-by: Lucien Grondin <grondilu@yahoo.fr>
feat(diagnostic): add `vim.diagnostic.count()`
Problem: Getting diagnostic count based on the output of
`vim.diagnostic.get()` might become costly as number of diagnostic
entries grows. This is because it returns a copy of diagnostic cache
entries (so as to not allow users to change them in place).
Getting information about diagnostic count is frequently used in
statusline, so it is important to be as fast as reasonbly possible.
Solution: Add `vim.diagnostic.count()` which computes severity
counts without making copies.
Problem: Commits backport-merged to release branches are cherry-picked
from the original commits in the PR from a fork repository, NOT the
actual commit that are merged to neovim/neovim (HEAD). Therefore the
commit reference in the commit message `cherry picked from commit ...`
usually refers to a commit that does NOT exist in the repository,
given that our preferred way of merging PR (rebasing, squashing, etc.)
would rewrite commits.
Solution: Turn on new feature 'detect_merge_method' of backport-action
workflow.
Adding a file to `OUTPUT` in `add_custom_command` marks that file as
`GENERATED` in cmake, and will thus be removed when running the `clean`
target. As cmake doesn't have a good way to mark that certain files
should not be removed, we instead "lie" to it by omitting the files we
want to keep from `OUTPUT`. This hack only works as long as there aren't
any other files that depend on the generated files we want to keep,
which currently seems to be the case. If this assumption changes in the
future, then we need to separate the parts that are generated and the
parts that are not as to prevent an infinite dependency chain.
Problem: `functional/vimscript/api_functions_spec` skips a test if the
runtime files are not generated, but this check was broken in a
refactor.
Solution: Since runtime files are now generated for all test targets, do
not skip this test.
- Use `#pragma once` for `cmake.config/config.h.in`
- Remove unused variable `CACHED_GENERATED_DIR`
- Reorganize and sort variables
- Introduce `STYLUA_DIRS` variable to ensure the `formatlua` and
`lintlua-stylua` operates on the same files.
- Adjust variable scope to avoid using hacky directory properties.
- Add more necessary runtime files as test dependencies
Problem: Wrong display when 'breakindentopt' contains "sbr" and
'showbreak' and 'nobreakindent' are set.
Solution: Always reset wlv->need_showbreak regardless of the values of
'breakindent' and 'showbreak', as they aren't checked when
setting wlv->need_showbreak (zeertzjq)
closes: vim/vim#137857e4f62a257
There is no reason for this file to be in project root, which is crowded
as is. This also fits nicely part of the ongoing work towards gathering
as much of the documentation as possible into one place.
runtime(mermaid): Syntax fix (vim/vim#13774)
* runtime(mermaid): Fix arrow syntax
* runtime(mermaid): Disable syntax for identifier to avoid false match
* runtime(mermaid): Add some C++ type syntax highlight
* runtime(mermaid): Update last change time in header
a03647acc3
Co-authored-by: KSR-Yasuda <31273423+KSR-Yasuda@users.noreply.github.com>
runtime(diff): Update default links (vim/vim#13776)
Problem: Current default links for `diffAdded`, `diffChanged`, and
`diffRemoved` do not address the diff nature of the filetype.
Solution: Use `DiffAdd`, `DiffChange`, and `DiffDelete`.
closes: vim/vim#1375900b470052b
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
runtime(doc): clarify behaviour of ]m and ]M motions
In particular remove the sentence, that a missing '{'
(for ]m) or '}' (for ]M) after the cursor is an error, since
currently this is not treated as an error.
fixes: vim/vim#1377765672ae118
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: cursor wrong after { in single line buffer
(Edwin Chan)
Solution: do not place the cursor at the end for a single
line buffer when moving backwards
(Gary Johnson)
closes: vim/vim#13780closes: vim/vim#137839e6549d2fb
Co-authored-by: Gary Johnson <garyjohn@spocom.com>
Problem: Visual selection isn't drawn with 'breakindent' when the line
doesn't fit in the window (Jaehwang Jung)
Solution: Adjust wlv->fromcol also for 'breakindent' (zeertzjq)
closes: vim/vim#13767closes: vim/vim#1376823627722d3
This reverts commit 5cb906e91c.
They were intentionally fast-tracked.
- `parse_snippet()` because of limited scope, and given that it's kinda
semi-broken (arbitrary formatting rules, not that useful for what it
was used for)
- `extract_completion_items()` doesn't work if we want to add the LSP
completionlist capability
- `text_document_completion_list_to_complete_items()` also doesn't work
for completionlist
runtime(r): Update R runtime files and docs (vim/vim#13757)
* Update R runtime files
- Fix indentation issue with ggplot().
- Setlocal autoindent in indent/r.vim.
- New syntax option: rmd_include_latex.
- Clear syn iskeyword to recognize _ as keyword.
- Document some options.
- remove the test has("patch-7.4.1142")
- Update changed date of doc files
9042bd8b09
Co-authored-by: Jakson Alves de Aquino <jalvesaq@gmail.com>
Style improvements:
1. Anonymous classes derived from `StructureLiteralType` should have a
better name. The class name can be also nested. Examples:
```diff
----@field serverInfo? anonym1
+---@field serverInfo? lsp._anonym1.serverInfo
```
```diff
----@field insertTextModeSupport? anonym26
+---@field insertTextModeSupport? lsp._anonym26.completionItem.insertTextModeSupport
```
2. Add one separate empty line before each `@field` definition. Without
these, empty lines the doc can look confusing because descriptions
also may contain empty lines. See `lsp.CompletionItem` for example:
```lua
---The kind of this completion item. Based of the kind
---an icon is chosen by the editor.
---@field kind? lsp.CompletionItemKind
---Tags for this completion item.
---
---@since 3.15.0
---@field tags? lsp.CompletionItemTag[]
```
It might feel like "Tags for this completion item" belongs to `kind`,
not `tags` due to the lack of separator blank lines. The following
(after this commit) should look much better:
```diff
---The kind of this completion item. Based of the kind
---an icon is chosen by the editor.
---@field kind? lsp.CompletionItemKind
+---
---Tags for this completion item.
---
---@since 3.15.0
---@field tags? lsp.CompletionItemTag[]
```
3. Escape some LSP-specific annotations that can't be recognized by
lua-ls. It'd be better to make them visible in LSP hover doc windows.
Example: `@sample ...`.
Fixes:
1. A type may extend from more than one base types (as well as mixin
types). Previously only the first base class was being considered,
resulting incomplete base classes for `@class` definitions.
Example: `InlayHintOptions` (should have both of `resolveProvider`
and `workDoneProgress`, the latter is from `WorkDoneProgressOptions`)
```diff
----@class lsp.InlayHintOptions
+---@class lsp.InlayHintOptions: lsp.WorkDoneProgressOptions
```
2. Remove `<200b>` (zero-width space) unicode characters.
3. Add the missing newline at EOF.
The purpose of this commit is to make diff clean and easy to read; to
see the diff resulted from actual changes in gen_lsp.lua, not from the
updated LSP protocol JSON data.
Ran: `nvim -l scripts/gen_lsp.lua gen --methods`
Based on 3.18.0 (2023-12-23)
The following functions should be removed in 0.12 according to the
deprecation strategy in MAINTAIN.md:
- vim.lsp.util.extract_completion_items()
- vim.lsp.util.parse_snippet()
- vim.lsp.util.text_document_completion_list_to_complete_items()
The releases doesn't work on intel mac as libintl isn't available on the system
by default. This makes `:language` not work for the shipped macos releases,
though the reduction in build system complexity most likely outweighs that.
All releases that aren't directly maintained by us should live in the
`neovim/neovim-releases` repository to make it clear that neovim isn't
directly responsible for it and to correctly manage expectations that
it's provided on a best-effort case.
Closes https://github.com/neovim/neovim/issues/26717.
Problem: Default number column has incorrect width after 'statuscolumn'
is unset due to an error, but was also truncated.
Solution: Reverse 'statuscolumn' error and truncate return branches.
Problem: Unable to predict which byte-offset to place virtual text to
make it repeat visually in the wrapped part of a line.
Solution: Add a flag to nvim_buf_set_extmark() that causes virtual
text to repeat in wrapped lines.
As specified by MAINTAIN.md, features should be soft deprecated at first
(meaning no warnings) to give people a chance to adjust. The problem
with this approach is that deprecating a feature becomes harder than
usual as during the soft deprecation period you need to remember not to
issue a warning, and during the hard deprecation period you need to
remember to start issuing a warning.
This behavior is only enforced if the `plugin` parameter is `nil` as
plugins may not want this specific behavior.
Problem:
A region managed by an injected parser may shrink after re-running the
injection query. If the updated region goes out of the range to be
parsed, then the corresponding tree will remain outdated, possibly
retaining the nodes that shouldn't exist anymore. This results in
outdated highlights.
Solution:
Re-parse an invalid tree if its region intersects the range to be
parsed.
Runtime(fortran): updates to indent, syntax and ftplugin (vim/vim#13752)
* runtime update fortran.vim
Add folding for newer features of Fortran
* Runtime Update fortran.vim
Add indent support for newer features of Fortran
* Runtime Update fortran.vim
Add newer features of Fortran to matchit patterns
ea9964a36f
Co-authored-by: Ajit-Thakkar <142174202+Ajit-Thakkar@users.noreply.github.com>
Just pass p_cpo to replace_termcodes() directly.
This allows removing option_vars.h from keycodes.h, and also avoids the
mistake of passing 0 as cpo_flags.
We no longer return to the main loop in win_line() to put column
characters on the screen. Simplify and sync statuscolumn drawing
logic with that of statusline.
Use the get_language_id client option to resolve the filetype when
matching the document selector in a dynamic capability.
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
refactor(lsp): move glob parsing to vim.glob
Moving the logic for using vim.lpeg to create a match pattern from a
glob into `vim.glob`. There are several places in the LSP spec that
use globs, and it's very useful to have glob matching as a
generally-available utility.
We do not need an enum to keep track of what place in win_line() we
currently are at. We already have a variable which keeps track where
in the code we currently are (and thus what part of the line we are
currently rendering), it is called the _program counter_. When we need
non-linear or self-referential control-flow anyway for a laugh, we
have a mechanism for that, it is called _function calls_.
Do not "save" and "restore" the wlv->n_extra state every time the
columns are to be drawn. This sort of thing needs to go away. Instead of
setting the n_extra variables and then going to the outer while loop,
the text in the columns can be rendered by just simply putting the text
into the cells of the screen line, right away. Even in nvim this can be
tricky sometimes, luckily we can use function calls to abstract this
logic, which means that this handy data structure called the _call
stack_ is handling saving away state temporarily, and restoring it back
when we need it again.
Lastly, but not least, as we now have direct control how signs
are rendered, these can be stored as schar_T[2] and be directly
put on screen as such.
"export" only prevents IWYU from adding these headers if the headers
that export them are included, while "private" ensures that IWYU never
adds these headers.
Problem: Maximum callback depth is not configurable.
Solution: Revert patch 9.0.2103. Set 'maxfuncdepth' in test.
fixes: vim/vim#13732closes: vim/vim#13736fe583b1e59
runtime(erlang): add support for matchit plugin (vim/vim#13713)
This commit updates the Erlang runtime files to be in sync with the
`vim-erlang-runtime` repository. In particular, it adds the following
commit (with some cleanup and simplification afterwards):
6ea8b85bc918ab6c3392
Co-authored-by: Csaba Hoch <csaba.hoch@gmail.com>
runtime(vim): Update syntax file (vim/vim#13739)
Match all ex commands after ":" and the "|" command separator.
Exceptions are not handled yet and :insert/:change/:append are still not
matched after the command separator bar.
21064ebcd6
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem:
Bundled color schemes use `:hi clear` and only define Vim's highlight
groups. This results into Nvim-specific highlight groups using
definitions from Nvim's default color scheme, which are not always
linked to a Vim's highlight group.
Solution:
Restore links to Vim's highlight groups which were present before Nvim's
default color scheme update.
Problem: Bundled 'vim' color scheme is written in Vimscript which
implicitly assumes that the file is ported from Vim.
This is not the case, at it is currently the Neovim's way of providing
backward compatibility for color schemes.
Solution: Rewrite it in Lua to indicate that this runtime file comes
from Neovim.
The data to be written can be very long, so use nvim_chan_send() instead
of io.stdout:write() as the latter doesn't handle EAGAIN.
A difference of these two approaches is that nvim_chan_send() writes to
stderr, not stdout, so it won't work if client stderr is redirected.
Problem: Not all default highlight groups show their actual colors.
Solution: Refactor `vimhelp.lua` and apply it to all relevant lists (UI
groups, syntax groups, treesitter groups, LSP groups, diagnostic groups).
Problem: If a help buffer is opened without legacy syntax set (because
treesitter is enabled), Vim strips (some) markup. This means the syntax
engine fails to parse (some) syntax if treesitter highlighting is
disabled again.
Solution: Do not strip the help buffer of markup since (legacy or
treesitter) highlighting is always enabled in Nvim. Similarly, remove
redundant setting of filetype and give the function a more descriptive
name.
- Remove some unused fields
- Prefix classes with `vim.`
- Move around some functions so the query stuff is at the top.
- Improve type hints
- Rework how hl_cache is implemented
Problem: Wrong cursor position when dragging out of window.
Solution: Don't use ScreenCols[] when mouse is not in current window.
closes: vim/vim#13717ec14924368
Problem: reg_executing() returns wrong result in :normal with range
when 'showcmd' is set (after 8.2.4705).
Solution: Reset "pending_end_reg_executing" when executing a register.
closes: vim/vim#13707615202bd0e
Diagnostic signs should now be configured with vim.diagnostic.config(),
but "legacy" sign definitions should go through the standard deprecation
process to minimize the impact from breaking changes.
Problem:
- The :Evaluate result window is not cleaned up when the cursor moves.
- This window is not focusable.
Solution:
Replace the old implementation from autozimu/LanguageClient-neovim with
vim.lsp.util.open_floating_preview and implement custom focusing logic.
Also remove g:termdebug_useFloatingHover option now that it's working
correctly.
runtime(fortan): update fortran syntax rules and doc notes
Update to the Fortran 2023 standard. Reorganize some code to reflect the
dropping of dialect support in the previous commit. Minor improvements.
closes: vim/vim#1371271cbe8e17a
Co-authored-by: Ajit-Thakkar <142174202+Ajit-Thakkar@users.noreply.github.com>
It isn't really useful to put anonymous enums only used as arguments to
functions calls in _defs.h headers, as they will only be used by a file
that calls those functions, which requires including a non-defs header.
Also move os_msg() and os_errmsg() back to message.h, as on Windows they
are actual functions instead of macros.
Also remove gettext.h and globals.h from private/helpers.h.
Problem:
Treesitter highlighter's on_line was iterating all the parsed trees,
which can be quite a lot when injection is used. This may slow down
scrolling and cursor movement in big files with many comment injections
(e.g., lsp/_meta/protocol.lua).
Solution:
In on_win, collect trees inside the visible range, and use them in
on_line.
NOTE:
This optimization depends on the correctness of on_win's botline_guess
parameter (i.e., it's always greater than or equal to the line numbers
passed to on_line). The documentation does not guarantee this, but I
have never noticed a problem so far.
Refactor the --version string to remove semicolons. Although semicolons are
present in LINK_OPTIONS, they are not actually included during compilation.
Problem:
`findoption()` searches through the options[] table linearly for option
names, even though hashy can be used to generate a compile-time hash
table for it.
Solution:
Use hashy to generate a compile time hash table for finding options.
This also allows handling option aliases, so we don't need separate
options[] table entries for things like 'viminfo'.
- add EXTERNALPROJECT_OPTIONS variable to main build
- use `REQUIRED` keyword for IWYU.
- remove check_c_compiler_flag checks when `ENABLE_COMPILER_SUGGESTIONS`
is `ON`. If we explicitly enable it then we probably want it to give
an error if it doesn't exist, rather than silently skip it.
- Move dependency interface libraries to their find module and use them
as a pseudo-imported target.
- Remove BUSTED_OUTPUT_TYPE. It's not used and we can reintroduce it
again if something similar is needed.
- Use LINK_OPTIONS intead of LINK_FLAGS when generating the `--version`
output.
Currently, setting &bg at all re-initializes highlights and reloads
the active colorscheme, even if the actual value of &bg has not changed.
With https://github.com/neovim/neovim/pull/26595 this causes a
regression since &bg is set unconditionally based on the value detected
from the terminal.
Instead, only reload the colorscheme if the actual value of &bg has
changed.
The benefits are primarily being able to use FetchContent, which allows
for a more flexible dependency handling. Other various quality-of-life
features such as `-B` and `-S` flags are also included.
This also removes broken `--version` generation as it does not work for
version 3.10 and 3.11 due to the `JOIN` generator expression.
Reference: https://github.com/neovim/neovim/issues/24004
Cmake 3.28+ will fail if two projects download the same file to prevent
scheduling problems. This can be circumvented by downloading luajit to a
unique location for each target. This is theoretically non-optimal since
we need to download the same file three times for universal builds, but
universal builds are rare and the convenience of this method outweighs
setting up the dependencies optimally. This fixes the currently broken
release workflow for mac.
Closes https://github.com/neovim/neovim/issues/26526.
runtime(doc): remove deprecation warning for gdefault
Deprecated can be misunderstood as being slated for removal; slightly
change wording to be clearer.
82f19734bf
Co-authored-by: dundargoc <gocdundar@gmail.com>
runtime(racket): update Racket runtime files (vim/vim#13693)
This brings the included Racket runtime files to commit 43bfc87 (update
headers, 2023-12-15) of https://github.com/benknoble/vim-racket. Note
that not all files from that repository are included. (In particular,
the ftdetect script is omitted for now.)
5eb9cb53d6
Co-authored-by: D. Ben Knoble <ben.knoble+github@gmail.com>
runtime(colorschemes): Update colorschemes (vim/vim#13691)
Minor changes:
- Regenerated using colortemplate 2.2.3
- Removed reversed gui-cursor for some of the colorschemes (retrobox, wildcharm, lunaperche)
- Change MatchParen for some of colorschemes.
0378f07fba
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: Updating default color scheme produced some feedback.
Solution: Address the feedback.
Outline of the changes:
- Colors `Grey1` and `Grey2` are made a little bit more extreme (dark -
darker, light - lighter) to increase overall contrast.
- `gui` colors are treated as base with `cterm` colors falling back to
using 0-15 colors which come from terminal emulator.
- Update highlight group definition to not include attribute definition
if it is intended to staty uncolored.
- Tweak some specific highlight groups.
- Add a list of Neovim specific highlight groups which are now defined
differently in a breaking way.
- Minor tweaks in several other places related to default color scheme.
Problem: Moving tabpages on :drop may cause an endless loop
Solution: Disallow moving tabpages on :drop when cleaning up the arglist
first
Moving tabpages during drop command may cause an endless loop
When executing a :tab drop command, Vim will close all windows not in
the argument list. This triggers various autocommands. If a user has
created an 'au Tabenter * :tabmove -' autocommand, this can cause Vim to
end up in an endless loop, when trying to iterate over all tabs (which
would trigger the tabmove autocommand, which will change the tpnext
pointer, etc).
So instead of blocking all autocommands before we actually try to edit
the given file, lets simply disallow to move tabpages around. Otherwise,
we may change the expected number of events triggered during a :drop
command, which users may rely on (there is actually a test, that expects
various TabLeave/TabEnter autocommands) and would therefore be a
backwards incompatible change.
Don't make this an error, as this could trigger several times during the
drop command, but silently ignore the :tabmove command in this case (and
it should in fact finally trigger successfully when loading the given
file in a new tab). So let's just be quiet here instead.
fixes: vim/vim#13676closes: vim/vim#13686df12e39b8b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: CI: no FreeBSD 14 support
Solution: Drop support for FreeBSD 12, add FreeBSD 14
closes: vim/vim#1305924a95f42b8
N/A patches cirrus:
vim-patch:8.2.4853: CI with FreeBSD is a bit outdated
vim-patch:8.2.4889: CI only tests with FreeBSD 12
vim-patch:9.0.0580: no CI running for MacOS on M1
vim-patch:9.0.0596: CI on Mac M1 has the channel feature disabled
vim-patch:9.0.0668: CI on Mac M1 only uses clang
vim-patch:9.0.0676: CI on Mac M1 with gcc actually uses clang
vim-patch:9.0.1024: CI doesn't use the latest FreeBSD version
vim-patch:9.0.1904: Cirrus-CI fails because we have used all credits
vim-patch:9.0.1912: Cirrus-CI running out of credits
vim-patch:9.0.1979: Cirrus CI disabled
N/A patches github actions:
vim-patch:ed37d9b3241a
vim-patch:8.2.3450: coveralls action fails
vim-patch:8.2.3488: issue template is not easy to use
vim-patch:8.2.3500: Github CI fails to install clang
vim-patch:8.2.3785: running CI on MacOS with gcc is not useful
vim-patch:4e30b5c3bc83
vim-patch:9a4ec5a62632
vim-patch:8.2.3821: ASAN test run fails
vim-patch:8.2.3827: huntr badge does not really fit in the list
vim-patch:8.2.3891: github CI: workflows may overlap
vim-patch:8.2.4061: codecov bash script is deprecated
vim-patch:8.2.4092: MacOS CI: unnecessarily doing "Install packages"
vim-patch:8.2.4096: Linux CI: unnecessarily installing packages
vim-patch:8.2.4222: MS-Windows: clumsy way to suppress progress on CI
vim-patch:8.2.4268: CI log output is long
vim-patch:8.2.4342: CI will soon switch to other windows version
vim-patch:8.2.4351: no coverage is measured on MS-Windows CI
vim-patch:8.2.4353: CI does not use the latest Lua and Python
vim-patch:8.2.4377: CI steps for Windows are a bit unorganized
vim-patch:8.2.4433: CI: cannot see interface versions for MS-Windows
vim-patch:8.2.4743: clang 14 is available on CI
vim-patch:8.2.4764: CI uses an older gcc version
vim-patch:8.2.4768: CI: codecov upload sometimes does not work
vim-patch:8.2.4816: still using older codecov app in some places of CI
vim-patch:8.2.4856: MinGW compiler complains about unknown escape sequence
vim-patch:8.2.4986: some github actions are outdated
vim-patch:8.2.5052: CI checkout step title is a bit cryptic
vim-patch:8.2.5086: CI runs on Windows 2019
vim-patch:8.2.5119: CI uses cache v2
vim-patch:9.0.0264: CI still runs on Ubuntu 18.04
vim-patch:9.0.0267: Coverity workflow still uses Ubuntu 18.04
vim-patch:9.0.0277: Coverity CI: update-alternatives not needed with Ubuntu 20.04
vim-patch:9.0.0302: CI for Coverity is bothered by deprecation warnings
vim-patch:9.0.0305: CI lists useless deprecation warnings
vim-patch:9.0.0401: CI uses older clang version
vim-patch:9.0.0536: CI: codecov action update available
vim-patch:9.0.0570: CI for Windows is still using codecov action 3.1.0
vim-patch:9.0.0573: outdated dependencies go unnoticed
vim-patch:9.0.0593: CI actions have too many permissions
vim-patch:9.0.0704: CI runs "tiny" and "small" builds, which are the same
vim-patch:9.0.0755: huge build on macos always fails on CI
vim-patch:9.0.0759: huge build on macos does not use Perl
vim-patch:9.0.0773: huge build on macos uses dynamic Perl
vim-patch:9.0.0847: CI: not totally clear what MS-Windows version is used
vim-patch:9.0.0937: forked repositories send out useless email
vim-patch:9.0.0941: CI failures in sound dummy
vim-patch:9.0.0946: CI: Error in Coverity flow is not reported
vim-patch:9.0.1071: Codecov action version is too specific
vim-patch:9.0.1114: CI does not use the latest Python version
vim-patch:9.0.1253: CI adds repository unnecessarily
vim-patch:9.0.1289: a newer version of clang can be used for CI
vim-patch:9.0.1384: setting HOMEBREW_NO_AUTO_UPDATE is not needed with version 4
vim-patch:9.0.1473: CI does not run sound tests
vim-patch:9.0.1474: CI runs with old version of Ubuntu and tools
vim-patch:9.0.1536: CI: sound dummy stopped working
vim-patch:9.0.1541: CI: sound dummy is disabled
vim-patch:9.0.1547: Coveralls workflow on CI is commented out
vim-patch:9.0.1548: CI: check in sound-dummy module may throw an error
vim-patch:9.0.1552: CI: sound-dummy module is not installed
vim-patch:9.0.1553: CI: using slightly outdated gcc version
vim-patch:9.0.1562: mixing package managers is not a good idea
vim-patch:9.0.1646: CI: codecov may take a very long time to run
vim-patch:8f5a8d8a8bdc
vim-patch:9.0.1713: Github CI fails to load snd-dummy kernel module
vim-patch:9.0.1733: CI: cannot cache linux-modules-extra
vim-patch:9.0.1736: Github Actions times out after 20 minutes
vim-patch:9.0.1748: CI: cannot label issues automatically
vim-patch:9.0.1751: CI: labeler configuration not found
vim-patch:9.0.1764: CI: label should not be set on all yml files
vim-patch:9180633e6892
vim-patch:9.0.1819: Github CI too complex
vim-patch:213c32318419
vim-patch:9.0.1903: CI fails because snd-dummy modules missing
vim-patch:9.0.1943: CI not run with clang-17
vim-patch:9.0.1954: CI: change netrw label in labeller bot
vim-patch:198734897ead
vim-patch:50f3ec2898a4
vim-patch:4b0018feca3a
vim-patch:cb5e7a2026d3
vim-patch:f1952d9fa8ef
vim-patch:9cc95aa0d8f5
vim-patch:a40e1687e757
vim-patch:c1c3b83816c8
vim-patch:1760331ae317
vim-patch:a02fe3480f8e
N/A patches build system:
vim-patch:8.2.0591: MS-Windows: should always support IPv6
vim-patch:8.2.3507: generating proto files may fail
vim-patch:8.2.3565: Makefile dependencies are outdated
vim-patch:8.2.3863: various build flags accidentally enabled
vim-patch:8.2.4130: MS-Windows: MSVC build may have libraries duplicated
vim-patch:8.2.4220: MS-Windows: some old compiler support remains
vim-patch:8.2.4244: MS-Windows: warning from MSVC on debug build
vim-patch:8.2.4271: MS-Windows: cannot build with Ruby 3.1.0
vim-patch:8.2.4284: old mac resources files are no longer used
vim-patch:8.2.4423: "make nvcmdidxs" fails
vim-patch:8.2.4491: MS-Windows makefile dependencies are outdated
vim-patch:8.2.4517: MS-Windows: cannot specify location of sodium library
vim-patch:8.2.4524: MS-Windows: cannot build with some sodium libraries
vim-patch:8.2.4596: installing tutor binary may fail
vim-patch:8.2.5031: cannot easily run the benchmarks
vim-patch:8.2.5090: MS-Windows: vim.def is no longer used
vim-patch:8.2.5101: MS-Windows with MinGW: $CC may be "cc" instead of "gcc"
vim-patch:8.2.5153: "make uninstall" does not remove colors/lists
vim-patch:8.2.5171: dependencies and proto files are outdated
vim-patch:9.0.0029: the bitmaps/vim.ico file is not in the distribution
vim-patch:9.0.0241: "make install" does not install shared syntax file
vim-patch:9.0.0242: "make install" still fails
vim-patch:9.0.0421: MS-Windows makefiles are inconsistently named
vim-patch:9.0.0477: missing dependency may cause crashes on incomplete build
vim-patch:9.0.0542: MSVC build still has support for 2012 edition
vim-patch:9.0.0588: MorphOS build is broken
vim-patch:9.0.0594: Makefile error message causes a shell error
vim-patch:9.0.0857: selecting MSVC 2017 does not set $PLATFORM
vim-patch:9.0.0879: unnecessary nesting in makefile
vim-patch:9.0.1342: MS-Windows: linking may fail with space in directory name
vim-patch:9.0.1486: parallel make might not work
vim-patch:9.0.1630: "make clean" at the toplevel fails
vim-patch:9.0.1681: Build Failure with Perl 5.38
vim-patch:9.0.1739: Leftover files in libvterm
vim-patch:9.0.1823: Autoconf 2.69 too old
vim-patch:9.0.1839: No Makefile rule to build cscope database
vim-patch:9.0.2028: confusing build dependencies
Co-authored-by: Philip H <47042125+pheiduck@users.noreply.github.com>
Comparing against the old value before setting matched the original
C implementation, but there is no reason to use this restriction. In
particular, this inhibits using OptionSet to determine when the option
was set. If users need to handle a case where the option _changed_, it
is easy to do so in an OptionSet autocommand using v:option_new and
v:option_old (and friends).
Notable changes:
- Downloads are significantly faster, upwards of 90% improvement in worst case
scenarios.
- Artifacts can be downloaded from other workflow runs and repositories when
supplied with a PAT.
runtime(vim): Update syntax file, fix missing for highlight (vim/vim#13668)
Fix highlighting of :for command. Link the vimFor syntax group to the
vimCommand highlight group.
Error introduced in commit f686921
1c97b5c0c0
Co-authored-by: dkearns <dougkearns@gmail.com>
runtime(sbt): do not set b:did_ftplugin before sourcing scala ftplugin(vim/vim#13657)
The `b:did_ftplugin` guard was set and prevented us from actually sourcing `ftplugin/scala.vim`. Since the latter script also sets the guard properly, we can simply remove the guard here.
5a68cdf149
Co-authored-by: Karl Yngve Lervåg <karl.yngve@lervag.net>
runtime(vim): Update syntax file (vim/vim#13653)
Improve variable highlighting in :let, :unlet, :const and :for commands.
Match registers and local, global and terminal option variables.
f6869212c9
Co-authored-by: dkearns <dougkearns@gmail.com>
Having a dynamically generated string is more maintainable than having
multiple files.
Also add linker flags and any potential LTO flags to the --version
output.
Anonymous namespaces are more difficult to extend or hook into since
they do not appear in the output of nvim_get_namespaces(). Use named
namespaces instead.
Problem: We have `P_(BOOL|NUM|STRING)` macros to represent an option's type, which is redundant because `OptValType` can already do that. The current implementation of option type flags is also too limited to allow adding multitype options in the future.
Solution: Remove `P_(BOOL|NUM|STRING)` and replace it with a new `type_flags` attribute in `vimoption_T`. Also do some groundwork for adding multitype options in the future.
Side-effects: Attempting to set an invalid keycode option (e.g. `set t_foo=123`) no longer gives an error.
Problem: Unpaired marks are invalidated if its column is deleted,
which may just be a "placeholder" column, e.g. for signs.
Solution: Only remove unpaired marks if its entire row is deleted.
Problem:
Unlike termopen(), nvim_open_term() PTYs do not carriage-return the
cursor on newline ("\n") input.
nvim --clean
:let chan_id = nvim_open_term(1, {})
:call chansend(chan_id, ["here", "are", "some", "lines"])
Actual behavior:
here
are
some
lines
Expected behaviour:
here
are
some
lines
Solution:
Add `force_crlf` option, and enable it by default.
Problem: 'termsync' overwrites the first parameter of a format string
when UNIBI_OUT() encounters an overflow.
Solution: Don't use tui->params[] for 'termsync'.
Problem: Wiki contents are not discoverable and hard to maintain.
Solution: Move FAQ to runtime docs.
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
If multiple XTGETTCAP requests are active at once (for example, for
requesting the Ms capability and truecolor capabilities), then the
TermResponse autocommand may fire for capabilities that were not
requested. Instead, make sure that the provided callback is only called
for capabilities that were actually requested.
uv_close asserts that a handle is not already closing. We can guard
against this assertion failure by manually checking the handle's closing
status ourselves.
Problem: line2byte behavior is changed after commit b051b13. It no
longer return `-1` on empty buffer.
Solution: use `nof_ff` instead of `!ff_dos` as condition. Then
compatible behavior of line2byte() is restored.
* Collect on_bytes and flush at the invocation of the scheduled callback
to take account of commands that triggers multiple on_bytes.
* More accurately track movement of folds so that foldexpr returns
reasonable values even when the scheduled computation is not run yet.
* Start computing folds from the line above (+ foldminlines) the changed
lines to handle the folds that are removed due to the size limit.
* Shrink folds that end at the line at which another fold starts to
assign proper level to that line.
* Use level '=' for lines that are not computed yet.
buf_signcols_validate_range() is only called in a buffer with signs, in
which the marktree is thus non-empty. Also remove a redundant comment,
condition and variable.
*** CID 470331: Error handling issues (CHECKED_RETURN)
/src/nvim/decoration.c: 824 in buf_signcols_validate_range()
818
819 // Allocate an array of integers holding the overlapping signs in the range.
820 assert(row2 >= row1);
821 int *overlap = xcalloc(sizeof(int), (size_t)(row2 + 1 - row1));
822
823 // First find the number of overlapping signs at "row1".
>>> CID 470331: Error handling issues (CHECKED_RETURN)
>>> Calling "marktree_itr_get_overlap" without checking return value (as is done elsewhere 4 out of 5 times).
824 marktree_itr_get_overlap(buf->b_marktree, currow, 0, itr);
825 while (marktree_itr_step_overlap(buf->b_marktree, itr, &pair)) {
826 if (!mt_invalid(pair.start) && pair.start.flags & MT_FLAG_DECOR_SIGNTEXT) {
827 overlap[0]++;
828 }
829 }
- Improve CLI argument parsing, rejects invalid argument and commands as
early as possible. Also prints USAGE in the command line.
- No longer allows `--<outfile>`, use `--out <outfile>` instead.
- Print a little bit of verbose messages to better know what's going on
rather than remaining silent at all times.
- Add type annotation `gen_lsp._opt` to avoid type warnings.
* fix garbled item for new treesitter injection format
* add missing item for new `vim.lpeg` and `vim.re`
* use taglinks where possible
* remove redundant "Added" and "Removed" from items
Add a macro to indicate the option count so that we can iterate through the options[] table more clearly. This also removes the need for having an option with NULL fullname at the end of `options[]`.
This is the command invoked repeatedly to make the changes:
:%s/^\(.*\)|\%(\*\(\d\+\)\)\?$\n\1|\%(\*\(\d\+\)\)\?$/\=submatch(1)..'|*'..(max([str2nr(submatch(2)),1])+max([str2nr(submatch(3)),1]))/g
Allow a "*count" suffix in a screen line to repeat the screen line for
"count" times.
The change is made to Screen:expect() and Screen:get_snapshot() instead
of Screen:render() so that screen expectations generated using code can
still work and test failures can still be readable.
A snapshot is now also printed on failure so that there is no need to
run the test again with Screen:snapshot_util().
Problem: Many places in the code use `findoption()` to access an option using its name, even if the option index is available. This is very slow because it requires looping through the options array over and over.
Solution: Use option index instead of name wherever possible. Also introduce an `OptIndex` enum which contains the index for every option as enum constants, this eliminates the need to pass static option names as strings.
runtime(doc): link cmdline completion to to |wildcards| and fix typos (vim/vim#13636)
The docs for cmdline completion doesn't mention that [abc] is considered
a wildcard, and |wildcards| contains more detailed information, so just
link to it.
Also fix some typos in other help files.
61e984e212
Rather than writing the synchronized update begin and end sequences into
the TUI's internal buffer (where it is later flushed to the TTY), write
these sequences directly to the TTY before and after the TUI's internal
buffer is itself flushed to the TTY.
This guarantees that a synchronized update is always used when we are
actually sending data to the TTY. This means we do not need to keep
track of the TUI's "dirty" state (any sequences which affect the TUI
state will be written in the TUI's internal buffer, which is now
guaranteed to only ever be written when a synchronized update is
active).
runtime(syntax): unlet b:filetype_in_cpp_family for cpp & squirrel
Update runtime/syntax/cpp.vim and runtime/syntax/squirrel.vim to unlet
b:filetype_in_cpp_family as it remains set even after updating the ft of
a file manually or through a modeline, not allowing c specific keywords
to be highlighted.
Since the variable b:filetype_in_cpp_family is only used by the c.vim
syntax script, unlet it directly after sourcing the c.vim runtime file
instead of at the end of the script.
Also update the last Change Header for both files.
closes: vim/vim#13650ff0baca865
Co-authored-by: laburnumT <laburnumtec@gmail.com>
Problem: The options[] array is not sorted alphabetically.
Solution: Sort it alphabetically. Add a test. Avoid unnecessary loop
iterations in findoption().
closes: vim/vim#13648
Cherry-pick Test_set_one_column() change from patch 8.2.0432.
f48558e10a
Problem: TUI flush (start sync or hide cursor) only starts on a "flush"
event, which is too late.
Solution: Start the next flush when anything will be drawn.
Problem: Currently, `get_option_value()` returns 3 separate things: The actual value of the option, whether the option is hidden, and the option flags. This makes the function difficult to refactor, modify or otherwise reason about.
Solution: Split `get_option_value()` into 3 functions, each with a single purpose. This also affects `get_option_value_for()`.
When we convert a Lua table to an Object, we consider the table a
"dictionary" if it contains only string keys, and an array if it
contains all numeric indices with no gaps. While rare, Lua tables can
have both strictly numeric indices and gaps (e.g. { [2] = 2 }). These
currently cannot be serialized because it is not considered an array.
However, we know the maximum index of the table and as long as all of
the keys in the table are numeric, it is still possible to serialize
this table as an array. The missing indices will have nil values.
Problem: The entire marktree needs to be traversed each time a sign is
removed from the sentinel line.
Solution: Remove sentinel line and instead keep track of the number of
lines that hold up the 'signcolumn' in "max_count". Adjust this
number for added/removed signs, and set it to 0 when the
maximum number of signs on a line changes. Only when
"max_count" is decremented to 0 due to sign removal do we need
to check the entire buffer.
Also replace "invalid_top" and "invalid_bot" with a map of
invalid ranges, further reducing the number of lines to be
checked.
Also improve tree traversal when counting the number of signs.
Instead of looping over the to be checked range and counting
the overlap for each row, keep track of the overlap in an
array and add this to the count.
Problem:
Since e057b38e70#20757 we support empty key in JSON encode/decode,
but we don't allow it in RPC object => Vim dict conversion. But empty
string is a valid key in Vim dicts and the msgpack spec.
Empty string key was disallowed in 7c01d5ff92 (2014) but that
commit/PR doesn't explicitly discuss it, so presumably it was a "seems
reasonable" decision (or Vimscript didn't allow empty keys until later).
Solution:
Remove the check in `object_to_vim()`. Note that
`tv_dict_item_alloc_len` will invoke `memcpy(…, 0)` but that's allowed
by the C spec: https://stackoverflow.com/a/3751937/152142
Currently, the value of $COLORTERM in :terminal in tests depends on
outer environment because of 'notermguicolors'.
If $COLORTERM is not set in :terminal, an inner Nvim instance will try
to detect 'termguicolors' support, which may interfere with tests.
So set 'termguicolors' in outer Nvim instance unless $COLORTERM needs to
be overridden, and unset it in inner Nvim instance when running TUI.
16 bytes is not enough room for existing usage of the buffer by the
tests, so the name may get truncated and cause log_spec test to fail:
FAILED test/functional/core/log_spec.lua @ 30: log messages are formatted with name or test id
test/helpers.lua:146: retry() attempts: 51
test/helpers.lua:155: Pattern "%.%d+%.%d/c +server_init:%d+: test log message" not found in log (last 100 lines): Xtest_logging:
ERR 2023-11-24T23:36:34.252 T1274.2445945.0 server_init:57: test log message
ERR 2023-11-24T23:36:34.275 T1274.2445945.0 server_init:57: test log message
Set 'notermguicolors' in tests which spawn a child Nvim process to force
existing tests to use 16 colors. Also refactor the child process
invocation to make things a little bit less messy.
If the color scheme is changed in a startup script, nvim used to send
multiple default_colors_set events, one for the default color scheme
and one for the user's chosen color scheme. This would cause flicker in
some UI:s. Throttle this event until we actually start drawing on the
screen.
fixes#26372
Followup to 27501d3b6a.
Problem:
CI sometimes fails. Something is triggering an extra fsync().
FAILED test/functional/core/fileio_spec.lua @ 52: fileio fsync() with 'nofsync' #8304
test/functional/core/fileio_spec.lua💯 Expected objects to be the same.
Passed in:
(number) 5
Expected:
(number) 4
Solution:
Relax the assertion.
Enable 'termguicolors' automatically when Nvim can detect that truecolor
is supported by the host terminal.
If $COLORTERM is set to "truecolor" or "24bit", or the terminal's
terminfo entry contains capabilities for Tc, RGB, or setrgbf and
setrgbb, then we assume that the terminal supports truecolor. Otherwise,
the terminal is queried (using both XTGETTCAP and SGR + DECRQSS). If the
terminal's response to these queries (if any) indicates that it supports
truecolor, then 'termguicolors' is enabled.
Problem:
Empty string is a valid JSON key, but json_decode() treats an object
with empty key as ":help msgpack-special-dict". #20757
:echo json_decode('{"": "1"}')
{'_TYPE': [], '_VAL': [['', '1']]}
Note: vim returns `{'': '1'}`.
Solution:
Allow empty string as an object key.
Note that we still (currently) disallow empty keys in object_to_vim() (since 7c01d5ff92):
f64e4b43e1/src/nvim/api/private/converter.c (L333-L334)Fix#20757
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem:
The test for 'nofsync' swapfile preservation on a deadly signal, does
not actually assert anything.
followup to 1fd29a2884
Solution:
Check that swapfile contents are present after getting SIGTERM.
TODO: this doesn't really verify that 'fsync' was called; it still
passes with this patch:
diff --git a/src/nvim/main.c b/src/nvim/main.c
index 216e39f3e81c..7a635520401d 100644
--- a/src/nvim/main.c
+++ b/src/nvim/main.c
@@ -838,7 +838,7 @@ void preserve_exit(const char *errmsg)
if (errmsg != NULL) {
os_errmsg("Vim: preserving files...\r\n");
}
- ml_sync_all(false, false, true); // preserve all swap files
+ ml_sync_all(false, false, false); // preserve all swap files
break;
}
}
However it correctly fails with this patch, at least:
diff --git a/src/nvim/main.c b/src/nvim/main.c
index 216e39f3e81c..f2306c310ddc 100644
--- a/src/nvim/main.c
+++ b/src/nvim/main.c
@@ -838,7 +838,6 @@ void preserve_exit(const char *errmsg)
if (errmsg != NULL) {
os_errmsg("Vim: preserving files...\r\n");
}
- ml_sync_all(false, false, true); // preserve all swap files
break;
}
}
Problem:
When `vim._foldupdate()` is invoked inside a scheduled callback, the
cursor may have moved to a line with a closed fold, e.g., after `dd` on
the line that is one line above a folded region. Then it opens the fold,
which is unnecessary and distracting. Legacy foldexprs do not have this
issue.
Solution:
Don't explicitly open folds on cursor.
Note:
This doesn't completely prevent spurious opening of folds. That is due
to bugs in treesitter foldexpr algorithm, which should be addressed
separately.
Problem: Confusing error for missing key.
Solution: Use the actualy key for the error. (closesvim/vim#9241)
5c1ec439f0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Set_ref_in_list() only sets ref in items.
Solution: Rename to set_ref_in_list_items() to avoid confusion.
7be3ab2589
Omit set_ref_in_list() and set_ref_in_dict(): only used in popup window,
if_pyth and if_lua.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'breakindent' is not drawn after diff filler lines.
Solution: Correct check for whether 'breakindent' should be drawn.
closes: vim/vim#13624588f20dece
Cherry-pick Test_diff_with_syntax() change from patch 9.0.1257.
runtime(doc): remove non-existent parameter in shift-command (vim/vim#13626)
The variant with the {count} parameter is explained in the next item.
2103a56eab
N/A patches:
vim-patch:9.0.2150: Using int for errbuflen in option funcs
vim-patch:3f7855a6123c
Co-authored-by: Roy Orbitson <Roy-Orbison@users.noreply.github.com>
Problem:
CI sometimes fails. Something is triggering an extra fsync().
FAILED test/functional/core/fileio_spec.lua @ 52: fileio fsync() codepaths #8304
test/functional/core/fileio_spec.lua:87: Expected objects to be the same.
Passed in:
(number) 3
Expected:
(number) 2
stack traceback:
test/functional/core/fileio_spec.lua:87: in function <test/functional/core/fileio_spec.lua:52>
Solution:
Relax the assertion to `fsync >= 2` instead of exactly 2.
(Note this is not a behavior change: the next assertion has always
checked `fsync == 4`, it's just that the intermediate 3rd fsync was
never explicitly asserted.)
Problem: Vim does not detect pacman.log file
Solution: Detect pacmanlogs and add syntax highlighting
pacman.log is a filetype common to Arch Liux and related distributions.
Add some simple syntax highlighting for the pacmanlog filetype.
closes: vim/vim#136181e5d66408e
Co-authored-by: Ronan Pigott <ronan@rjp.ie>
Problem:
With vim.treesitter.foldexpr, `o`-ing two lines above a folded region
opens the fold. This does not happen with legacy foldexprs. For example,
make a markdown file with the following text (without indentation),
enable treesitter fold, and follow the instruction in the text.
put cursor on this line and type zoo<Esc>
initially folded, revealed by zo
# then this fold will be opened
initially folded, revealed by o<Esc>
Analysis:
* `o` updates folds first (done in `changed_lines`), evaluating
foldexpr, and then invokes `on_bytes` (done in `extmark_splice`).
* Treesitter fold allocates the foldinfo for added lines (`add_range`)
on `on_bytes`.
* Therefore, when treesitter foldexpr is invoked while running `o`, it
sees outdated foldinfo.
Solution:
`extmark_splice`, and then `changed_lines`. This seems to be the
standard order in other places, e.g., `nvim_buf_set_lines`.
Problem:
Not all Lua code is checked by stylua. Automating code-style is an
important mechanism for reducing time spent on accidental
(non-essential) complexity.
Solution:
- Enable lintlua for `test/unit/` directory.
- TODO: only `test/functional/` remains unchecked.
previous: 45fe4d11ad
previous: 517f0cc634
Problem:
Not all Lua code is checked by stylua. Automating code-style is an
important mechanism for reducing time spent on accidental
(non-essential) complexity.
Solution:
- Enable lintlua for `src/` directory.
followup to 517f0cc634
Problem:
We don't enable stylua for many Lua scripts. Automating code-style is an
important tool for reducing time spent on accidental (non-essential)
complexity.
Solution:
- Enable lintlua for `scripts/` directory.
- Specify `call_parentheses = "Input"`, we should allow kwargs-style
function invocations.
This will ensure that we can pass flags and make adjustments from the
top level cmake file instead of digging through the cmake directory.
More importantly, this will only format files that have been changed.
This has a slightly higher initial cost compared to previous solution as
all files must be initially formatted, but the gained speed up should
more than make up for it quickly.
`make formatlua` is always run due to a quirk of stylua of always changing
modification time of the file regardless if there were any changes. This is not
a major blocker as stylua is very fast.
PROBLEM: `vim.treesitter.get_node()` does not recognize the `lang` in
the option table. This option was used in somewhere else, for instance,
`vim.treesitter.dev` (for `inspect_tree`) but was never implemented.
SOLUTION: Make `get_node()` correctly use `opts.lang` when getting a
treesitter parser.
Problem: Wrong scrolling in Insert mode with 'smoothscroll' at the
bottom of the window.
Solution: Don't use set_topline() when 'smoothscroll' is set.
fixes: vim/vim#13612closes: vim/vim#136135b4d1fcbf0
Problem: Default color scheme is suboptimal.
Solution: Start using new color scheme. Introduce new `vim` color scheme
for opt-in backward compatibility.
------
Main design ideas
- Be "Neovim branded".
- Be minimal for 256 colors with a bit more shades for true colors.
- Be accessible through high enough contrast ratios.
- Be suitable for dark and light backgrounds via exchange of dark and
light palettes.
------
Palettes
- Have dark and light variants. Implemented through exporeted
`NvimDark*` and `NvimLight*` hex colors.
- Palettes have 4 shades of grey for UI elements and 6 colors (red,
yellow, green, cyan, blue, magenta).
- Actual values are computed procedurally in Oklch color space based on
a handful of hyperparameters.
- Each color has a 256 colors variant with perceptually closest color.
------
Highlight groups
Use:
- Grey shades for general UI according to their design.
- Bold text for keywords (`Statement` highlight group). This is an
important choice to increase accessibility for people with color
deficiencies, as it doesn't rely on actual color.
- Green for strings, `DiffAdd` (as background), `DiagnosticOk`, and some
minor text UI elements.
- Cyan as main syntax color, i.e. for function usage (`Function`
highlight group), `DiffText`, `DiagnosticInfo`, and some minor text UI
elements.
- Red to generally mean high user attention, i.e. errors; in particular
for `ErrorMsg`, `DiffDelete`, `DiagnosticError`.
- Yellow very sparingly only with true colors to mean mild user
attention, i.e. warnings. That is, `DiagnosticWarn` and `WarningMsg`.
- Blue very sparingly only with true colors as `DiagnosticHint` and some
additional important syntax group (like `Identifier`).
- Magenta very carefully (if at all).
------
Notes
- To make tests work without relatively larege updates, each one is
prepended with an equivalent of the call `:colorscheme vim`.
Plus some tests which spawn new Neovim instances also now use 'vim'
color scheme.
In some cases tests are updated to fit new default color scheme.
Problem: [security]: buffer-overflow in ex_substitute
Solution: clear memory after allocating
When allocating the new_start pointer in ex_substitute() the memory
pointer points to some garbage that the following for loop in
ex_cmds.c:4743 confuses and causes it to accessing the new_start pointer
beyond it's size, leading to a buffer-overlow.
So fix this by using alloc_clear() instead of alloc(), which will
clear the memory by NUL and therefore cause the loop to terminate
correctly.
Reported by @henices, thanks!
closes: vim/vim#13596abfa13ebe9
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: stack-buffer-overflow in option callback functions
Solution: pass size of errbuf down the call stack, use snprintf()
instead of sprintf()
We pass the error buffer down to the option callback functions, but in
some parts of the code, we simply use sprintf(buf) to write into the error
buffer, which can overflow.
So let's pass down the length of the error buffer and use sprintf(buf, size)
instead.
Reported by @henices, thanks!
b39b240c38
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: buffer-overflow in suggest_trie_walk
Solution: Check n before using it as index into byts array
Basically, n as an index into the byts array, can point to beyond the byts
array. So let's double check, that n is within the expected range after
incrementing it from sp->ts_curi and bail out if it would be invalid.
Reported by @henices, thanks!
0fb375aae6
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in win-enter
Solution: validate window pointer before calling win_enter()
win_goto() may stop visual mode, if it is active. However, this may in
turn trigger the ModeChanged autocommand, which could potentially free
the wp pointer which was valid before now became stale and points to now
freed memory.
So before calling win_enter(), let's verify one more time, that the
wp pointer still points to a valid window structure.
Reported by @henices, thanks!
eec0c2b3a4
Co-authored-by: Christian Brabandt <cb@256bit.org>
This reverts commit fe30d8ccef.
The original commit intends to prevent heap-use-after-free with EXITFREE
caused by changedtick_di, which is no longer a problem.
Freeing buffers after freeing variables will cause heap-use-after-free
with EXITFREE when a partial is used as prompt callback.
Problem: html.angular ft is problematic
Solution: partly revert v9.0.2137
The html.angular filetype causes issues and does not trigger FileType
autocommands for the html or angular filetypes.
So let's roll back that particular change and detect this only as html
file
related: https://github.com/vim/vim/pull/13594#issuecomment-1834465890closes: vim/vim#136044f3480c943
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
`LanguageTree:for_each_tree` calls itself for child nodes, so when we
calls `for_each_tree` inside `for_each_tree`, this quickly leads to
exponential tree calls.
Solution:
Use `pairs(child:trees())` directly in this case, as we don't need the
extra callback for each children, this is already handled from the outer
`for_each_tree` call
Some escape sequences (in particular, OSC 52 paste responses) can be
very large, even unbounded in length. These can easily overflow
termkey's internal buffer. In order to process these long sequences,
dynamically grow termkey's internal buffer.
When first opened, the tree-sitter inspector traverses all of the nodes
in the buffer to calculate an array of nodes. This traversal is done
only once, and _all_ nodes (both named and anonymous) are included.
Toggling anonymous nodes in the inspector only changes how the tree is
drawn in the buffer, but does not affect the underlying data structure
at all.
When the buffer is traversed and the list of nodes is calculated, we
don't know whether or not anonymous nodes will be displayed in the
inspector or not. Thus, we cannot determine during traversal where to
put closing parentheses. Instead, this must be done when drawing.
When we draw, the tree structure has been flatted into a single array,
so we lose parent-child relationships that would otherwise make
determining the number of closing parentheses straightforward. However,
we can instead rely on the fact that a delta between the depth of a node
and the depth of the successive node _must_ mean that more closing
parentheses are required:
(foo
(bar)
(baz) ↑
│
└ (bar) and (baz) have different depths, so (bar) must have an
extra closing parenthesis
This does not depend on whether or not anonymous nodes are displayed and
so works in both cases.
FUNC_ATTR_* should only be used in .c files with generated headers.
Defining FUNC_ATTR_* as empty in headers causes misuses of them to be
silently ignored. Instead don't define them by default, and only define
them as empty after a .c file has included its generated header.
runtime(html): Update syntax file (vim/vim#13591)
Add missing search element and update ARIA attribute list.
Add a very basic test file to check all elements are matched.
a9058440b7
Co-authored-by: dkearns <dougkearns@gmail.com>
The OptionSet autocommand does not fire until Vim has finished starting,
so setting 'background' before the VimEnter event would not fire the
OptionSet event. The prior implementation also waited until VimEnter to
set 'background', so this was a regression introduced when moving
background detection into Lua.
Problem: Only injections under the top level tree are found.
Solution: Iterate through all trees to find injections. When two
injections are contained within the same node in the parent tree, prefer
the injection with the larger byte length.
Problem: ml_get error when scrolling after delete
Solution: mark topline to be validated in main_loop
if it is larger than current buffers line
count
reset_lnums() is called after e.g. TextChanged autocommands and it may
accidentally cause curwin->w_topline to become invalid, e.g. if the
autocommand has deleted some lines.
So verify that curwin->w_topline points to a valid line and if not, mark
the window to have w_topline recalculated in main_loop() in
update_topline() after reset_lnums() returns.
fixes: vim/vim#13568fixes: vim/vim#13578c4ffeddfe5
The error doesn't happen in Nvim because Nvim triggers TextChanged after
calling update_topline().
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: MSVC errorformat can be improved
Solution: parse error type and column number in MSVC errorformat
closes: vim/vim#135878ceb99001b
Co-authored-by: Shawn Hatori <shawn.hatori@gmail.com>
Problem: No test for mode() when executing Ex commands
Solution: Add some test cases and simplify several other test cases.
Also add a few more test cases for ModeChanged.
closes: vim/vim#13588fcaeb3d42b
tmux intercepts and ignores XTGETTCAP so wrap the query in the tmux
passthrough sequence to make sure the query arrives at the "host"
terminal.
Users must still set the 'allow-passthrough' option in their tmux.conf.
Problem: Signcolumn width does not increase when ranged sign does not
start at sentinel line.
Solution: Handle paired range of added sign when checking signcols.
Checking if it's non-empty and not a directory gets us quite far, but
not all the way. While a working symlink would trigger the earlier
checks, a broken symlink does not.
This commit fixes the special case where ~/.local/share/nvim already
exists but is a broken symlink. Thus, it fixes the following error on
startup:
E739: Cannot create directory /home/samuel/.local/share/nvim: file
already exists
decor->text.str pointer must go. This removes it for conceal char,
in preparation for a larger PR which will also handle the sign case.
By actually allowing composing chars for a conceal chars, this
becomes a feature and not just a refactor, as a bonus.
Problem: We use the `p_force_on` and `p_force_off` variables to check if a variable is immutable and what its default value is. This is not only hacky and unintuitive, but also is limited to only boolean options.
Solution: Replace `p_force_on` and `p_force_off` with an `immutable` property for options, which indicates if an option is immutable. Immutable options cannot be changed from their default value.
Ref: #25672.
When parsing with a range, languagetree looks up injections and adds
them if needed. This explicitly invalidates parser, making `is_valid`
report `false` both when including and excluding children.
This is an attempt to describe desired behaviour of `is_valid` in tests,
with what ended up being a single line change to satisfy them.
This function is identical to vim_isprintc when encoding=utf-8 is used
As this is the only internal encoding nvim supports, it is now redundant
ref #2905
runtime(nginx): add additional nginx keywords (vim/vim#13581)
* Add support for missing keywords to the nginx syntax plugin
This adds support for several keywords from
- the built-in HTTP/2 module,
- the built-in SSL module,
- the built-in uWSGI module,
- the experimental QUIC branch,
- the third-party SSL CT module,
- the third-party dynamic TLS records patch.
Co-Author: ObserverOfTime <chronobserver@disroot.org>
* Add missing http2/ http3 keywords to nginx plugin
cf40409e7d
Co-authored-by: Chris Aumann <me@chr4.org>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Add syntax and filetype plugins for SWIG (Simplified Wrapper Interface
Generator) description files.
The default syntax for .i files highlights comments in a reverse
color scheme which doesn't look well. This syntax builds
on vim's c++ syntax by adding highlighting for common swig
directives and user defined directives. For an alternative
syntax, see vimscript vim/vim#1247 (which I found after writing this).
closes: vim/vim#135622e31065a65
Co-authored-by: Julien Marrec <julien.marrec@gmail.com>
Co-authored-by: Matěj Cepl <mcepl@cepl.eu>
Problem: When a swap file is found for a popup there is no dialog and the
buffer is loaded anyway.
Solution: Silently load the buffer read-only. (closesvim/vim#10073)
188639d75c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
09d4133 changed blocknr_T from long to int64_t, so pe_bnum is now always 64-bit. This was an incompatible change in the swapfile format for 32-bit systems, but there have been no complaints in the past 9 years so just adjust the test.
Problem: Unused assignments when checking the value of 'listchars'.
Solution: Loop only once when just checking the value. Add a test to
check that this change doesn't cause double-free.
closes: vim/vim#1355900624a2fa0
Problem: File info disappears immediately when 'cmdheight' has just
decreased due to switching tabpage and 'shortmess' doesn't
contain 'o' or 'O'.
Solution: Make sure msg_row isn't smaller than cmdline_row.
fixes: vim/vim#13560closes: vim/vim#1356140ed6711bd
skipwhite was iterating over the input twice and scanning for the null
byte character with strlen. this is redundant, because it's already
covered by ascii_iswhite that accepts only space or tab character.
Co-authored-by: ii14 <ii14@users.noreply.github.com>
runtime(netrw): Fix handling of very long filename on longlist style (vim/vim#12150)
If there is a file with a very long filename (longer than
g:netrw_maxfilenamelen), and if g:netrw_liststyle is set to 1, no space
is inserted between the filename and the filesize and the file cannot be
opened because of this.
E.g.:
```
$ echo hello > 12345678901234567890123456789012 # 32 bytes: OK
$ echo hello > 123456789012345678901234567890123 # 33 bytes: not OK
$ echo hello > 1234567890123456789012345678901234 # 34 bytes: not OK
$ echo hello > こんにちは # multibyte filename
$ LC_ALL=C.UTF-8 vim . --clean --cmd "set loadplugins" --cmd "let g:netrw_liststyle=1"
```
Then, it will be shown like this:
```
" ============================================================================
" Netrw Directory Listing (netrw v171)
" /cygdrive/c/work/netrw-test
" Sorted by name
" Sort sequence: [\/]$,\<core\%(\.\d\+\)\=\>,\.h$,\.c$,\.cpp$,\~\=\*$,*,\.o$,\
" Quick Help: <F1>:help -:go up dir D:delete R:rename s:sort-by x:special
" ==============================================================================
../ 0 Mon Mar 13 19:25:16 2023
./ 0 Mon Mar 13 19:44:58 2023
12345678901234567890123456789012 6 Mon Mar 13 19:29:43 2023
12345678901234567890123456789012346 Mon Mar 13 19:32:40 2023
1234567890123456789012345678901236 Mon Mar 13 19:29:49 2023
こんにちは 6 Mon Mar 13 19:30:41 2023
```
If the length of the filename is 32 bytes, there is a space between the
filename and the filesize. However, when it is longer than 32 bytes, no
space is shown.
Also, you may find that the filesize of the multibyte named file is not
aligned.
After this patch is applied, the filelist will be shown like this:
```
" ============================================================================
" Netrw Directory Listing (netrw v171)
" /cygdrive/c/work/netrw-test
" Sorted by name
" Sort sequence: [\/]$,\<core\%(\.\d\+\)\=\>,\.h$,\.c$,\.cpp$,\~\=\*$,*,\.o$,\
" Quick Help: <F1>:help -:go up dir D:delete R:rename s:sort-by x:special
" ==============================================================================
../ 0 Mon Mar 13 20:49:22 2023
./ 0 Mon Mar 13 21:12:14 2023
1234567890123456789012345678901 10000 Mon Mar 13 20:57:55 2023
12345678901234567890123456789012 6 Mon Mar 13 19:29:43 2023
123456789012345678901234567890123 6 Mon Mar 13 19:29:49 2023
1234567890123456789012345678901234 6 Mon Mar 13 19:32:40 2023
1234567890123456789012345678901234567 10000 Mon Mar 13 21:03:23 2023
1234567890123456789012345678901234567890 10000 Mon Mar 13 21:03:36 2023
123456789012345678901234567890123456789012 10000 Mon Mar 13 21:03:59 2023
1234567890123456789012345678901234567890123 10000 Mon Mar 13 21:03:45 2023
1234567890123456789012345678901234567890123456 5 Mon Mar 13 21:08:15 2023
12345678901234567890123456789012345678901234567 10 Mon Mar 13 21:05:21 2023
こんにちは 6 Mon Mar 13 19:30:41 2023
```
Now we have 32 + 2 + 15 = 49 characters for filename and filesize.
It tries to align the filesize as much as possible.
The last line that has multibyte filename is also aligned.
Also fixed the issue that the file list is not shown correctly when
g:netrw_sort_by is set to 'size' and g:netrw_sizestyle is set to 'h' or
'H'.
8750e3cf81
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: [security]: use-after-free in ex_substitute
Solution: always allocate memory
closes: vim/vim#13552
A recursive :substitute command could cause a heap-use-after free in Vim
(CVE-2023-48706).
The whole reproducible test is a bit tricky, I can only reproduce this
reliably when no previous substitution command has been used yet
(which is the reason, the test needs to run as first one in the
test_substitute.vim file) and as a combination of the `:~` command
together with a :s command that contains the special substitution atom `~\=`
which will make use of a sub-replace special atom and calls a vim script
function.
There was a comment in the existing :s code, that already makes the
`sub` variable allocate memory so that a recursive :s call won't be able
to cause any issues here, so this was known as a potential problem
already. But for the current test-case that one does not work, because
the substitution does not start with `\=` but with `~\=` (and since
there does not yet exist a previous substitution atom, Vim will simply
increment the `sub` pointer (which then was not allocated dynamically)
and later one happily use a sub-replace special expression (which could
then free the `sub` var).
The following commit fixes this, by making the sub var always using
allocated memory, which also means we need to free the pointer whenever
we leave the function. Since sub is now always an allocated variable,
we also do no longer need the sub_copy variable anymore, since this one
was used to indicated when sub pointed to allocated memory (and had
therefore to be freed on exit) and when not.
Github Security Advisory:
https://github.com/vim/vim/security/advisories/GHSA-c8qm-x72m-q53q26c11c5688
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: cannot use \=expr in :substitute.
Solution: Compile the expression into instructions and execute them when
invoked.
4c13721482
Vim9 script is N/A, including substitute_instr.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
The most general conditions should come before more specific conditions.
For example, `UNIX` options needs to be specified before any
distro-specific options. This way distro specific options takes priority
over the general case in case there's a conflict.
Problem: Unable to identify legacy signs when fetching extmarks with
`nvim_buf_get_extmarks()`.
Solution: Add "sign_name" to the extmark detail array.
Add some misc. changes as follow-up to #25724
Remove the monolithic Decoration struct. Before this change, each extmark
could either represent just a hl_id + priority value as a inline
decoration, or it would take a pointer to this monolitic 112 byte struct
which has to be allocated.
This change separates the decorations into two pieces: DecorSignHighlight
for signs, highlights and simple set-flag decorations (like spell,
ui-watched), and DecorVirtText for virtual text and lines.
The main separation here is whether they are expected to allocate more
memory. Currently this is not really true as sign text has to be an
allocated string, but the plan is to get rid of this eventually (it can
just be an array of two schar_T:s). Further refactors are expected to
improve the representation of each decoration kind individually. The
goal of this particular PR is to get things started by cutting the
Gordian knot which was the monolithic struct Decoration.
Now, each extmark can either contain chained indicies/pointers to
these kinds of objects, or it can fit a subset of DecorSignHighlight
inline.
The point of this change is not only to make decorations smaller in
memory. In fact, the main motivation is to later allow them to grow
_larger_, but on a dynamic, on demand fashion. As a simple example, it
would be possible to augment highlights to take a list of multiple
`hl_group`:s, which then would trivially map to a chain of multiple
DecorSignHighlight entries.
One small feature improvement included with this refactor itself, is
that the restriction that extmarks cannot be removed inside a decoration
provider has been lifted. These are instead safely lifetime extended
on a "to free" list until the current iteration of screen drawing is done.
NB: flags is a mess. but DecorLevel is useless, this slightly less so
Problem: [security] use-after-free in qf_free_items
Solution: only access qfpnext, if it hasn't been freed
Coverity discovered a possible use-after-free in qf_free_items. When
freeing the qfline items, we may access freed memory, when qfp ==
qfpnext.
So only access qfpnext, when it hasn't been freed.
567cae2630
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(netrw): expand $COMSPEC without applying 'wildignore' (vim/vim#13542)
When expanding $COMSPEC and a user has set :set wildignore=*.exe
netrw won't be able to properly cmd.exe, because it does not ignore the
wildignore setting.
So let's explicitly use expand() without applying the 'wildignore' and
'suffixes' settings to the result
closes: vim/vim#13426cb0c113ddc
Co-authored-by: Christian Brabandt <cb@256bit.org>
Enable all clang-tidy warnings by default instead of disabling them.
This ensures that we don't miss useful warnings on each clang-tidy
version upgrade. A drawback of this is that it will force us to either
fix or adjust the warnings as soon as possible.
Quick fix as follow up to https://github.com/neovim/neovim/pull/26108
kqueue only reports events on a watched folder itself, not for files
created or deleted within. So the approach the PR took doesn't work on FreeBSD.
We'll either need to bring back polling for it, combine watching with manual
file tracking, or disable LSP file watching on FreeBSD
Should help with https://github.com/neovim/neovim/issues/23291
On linux `new_fs_event` doesn't support recursive watching, but we can
still use it to watch folders.
The downside of this approach is that we may end up sending some false
`Deleted` events. For example, if you save a file named `foo` there will
be a intermediate `foo~` due to the save mechanism of neovim.
The events we get from vim.uv in that case are:
- rename: foo~
- rename: foo~
- rename: foo
- rename: foo
- change: foo
- change: foo
The mechanism in this PR uses a debounce to reduce this to:
- deleted: foo~
- changed: foo
`foo~` will be the false positive.
I suspect that for the LSP case this is good enough. If not, we may need
to follow up on this and keep a table in memory that tracks available
files.
- Correct MSVC warning suppression. The C4003 warning is issued during
file generation and not for the actual source files.
- Remove non-existent "scripts/pvscheck.sh" file from `lintsh` target.
- Remove spaces inside for loops with uncrustify.
- Point dependencies to use a git tag rather than releases, as releases
might have changes that deviate from the actual source code.
- Automatically update uncrustify config before formatting or linting.
Refactor our implementation of querying for Kitty keyboard protocol
support:
- Remove usage of the "extkeys" term. This is not standard or really
used elsewhere. Use "key encoding" instead
- Replace usages of "CSIu" with "Kitty". "Kitty keyboard protocol" is
vastly more common than "CSIu" now
- Replace the countdown response counter with a simple boolean flag. We
don't actually need a countdown counter because we request the primary
device attributes along with the Kitty keyboard query, so we will
always receive a "terminating event", making a countdown/timer
unnecessary
- Move the CSI response handling into a dedicated function
- Bypass Unibilium for sending key encoding escape sequences. These
sequences are not part of terminfo and do not have any parameters, so
there's no reason to go through Unibilium
Problem: The legacy signlist data structures and associated functions are
redundant since the introduction of extmark signs.
Solution: Store signs defined through the legacy commands in a hashmap, placed
signs in the extmark tree. Replace signlist associated functions.
Usage of the legacy sign commands should yield no change in behavior with the
exception of:
- "orphaned signs" are now always removed when the line it is placed on is
deleted. This used to depend on the value of 'signcolumn'.
- It is no longer possible to place multiple signs with the same identifier
in a single group on multiple lines. This will now move the sign instead.
Moreover, both signs placed through the legacy sign commands and through
|nvim_buf_set_extmark()|:
- Will show up in both |sign-place| and |nvim_buf_get_extmarks()|.
- Are displayed by increasing sign identifier, left to right.
Extmark signs used to be ordered decreasingly as opposed to legacy signs.
Problem: buffer text with composing chars are converted from UTF-8
to an array of up to seven UTF-32 values and then converted back
to UTF-8 strings.
Solution: Convert buffer text directly to UTF-8 based schar_T values.
The limit of the text size is now in schar_T bytes, which is currently
31+1 but easily could be raised as it no longer multiplies the size
of the entire screen grid when not used, the full size is only required
for temporary scratch buffers.
Also does some general cleanup to win_line text handling, which was
unnecessarily complicated due to multibyte rendering being an "opt-in"
feature long ago. Nowadays, a char is just a char, regardless if it consists
of one ASCII byte or multiple bytes.
Problem: [security]: Use-after-free in win_close()
Solution: Check window is valid, before accessing it
If the current window structure is no longer valid (because a previous
autocommand has already freed this window), fail and return before
attempting to set win->w_closing variable.
Add a test to trigger ASAN in CI
25aabc2b8e
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: buffer-overflow in trunc_string()
Solution: Add NULL at end of buffer
Currently trunc_string() assumes that when the string is too long,
buf[e-1] will always be writeable. But that assumption may not always be
true. The condition currently looks like this
else if (e + 3 < buflen)
[...]
else
{
// can't fit in the "...", just truncate it
buf[e - 1] = NUL;
}
but this means, we may run into the last else clause with e still being
larger than buflen. So a buffer overflow occurs.
So instead of using `buf[e - 1]`, let's just always
truncate at `buf[buflen - 1]` which should always be writable.
3bd7fa12e1
vim-patch:9.0.2004: Missing test file
Problem: Missing test file
Solution: git-add the file to the repo
closes: vim/vim#13305d4afbdd071
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Trailing white space in tests
Solution: Delete it
This causes test_codestyle to fail, so we need to remove it again.
Hopefully that makes the CI green again.
Note: I will start using annotated tags from now on.
da200c2f78
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap-buffer-overflow in vim_regsub_both
Solution: Disallow exchanging windows when textlock is active
f6d28fe2c9
Cherry-pick test_crash.vim change from patch 9.0.1876.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: crash with bt_quickfix1_poc when cleaning up
and EXITFREE is defined
Solution: Test if buffer is valid in a window, else close
window directly, don't try to access buffer properties
While at it, increase the crash timeout slightly, so that CI has a
chance to finish processing the test_crash() test.
623ba31821
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap-use-after-free in bt_normal()
Solution: check that buffer is still valid
6e60cf444a
Test change only.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap use after free in ins_compl_get_exp()
Solution: validate buffer before accessing it
ee9166eb3b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap-use-after-free in is_qf_win()
Solution: Check buffer is valid before accessing it
fc68299d43
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: test_crash1() fails on CI
Solution: don't run Screendump test, verify that it doesn't crash
by running it through a shell command line, testing
the exit value and concatenating success cmd using '&&'
db510ca805
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: FPE in adjust_plines_for_skipcol
Solution: don't divide by zero, return zero
Prevent a floating point exception when calculating w_skipcol (which can
happen with a small window when the number option is set and cpo+=n).
Add a test to verify
cb0b99f067
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in get_number
Solution: Return 0 when the count gets too large
[security]: overflow in get_number
When using the z= command, we may overflow the count with values larger
than MAX_INT. So verify that we do not overflow and in case when an
overflow is detected, simply return 0
73b2d3790c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in ex address parsing
Solution: Verify that lnum is positive, before substracting from
LONG_MAX
[security]: overflow in ex address parsing
When parsing relative ex addresses one may unintentionally cause an
overflow (because LONG_MAX - lnum will overflow for negative addresses).
So verify that lnum is actually positive before doing the overflow
check.
060623e4a3
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in nv_z_get_count
Solution: break out, if count is too large
When getting the count for a normal z command, it may overflow for large
counts given. So verify, that we can safely store the result in a long.
58f9befca1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow with count for :s command
Solution: Abort the :s command if the count is too large
If the count after the :s command is larger than what fits into a
(signed) long variable, abort with e_value_too_large.
Adds a test with INT_MAX as count and verify it correctly fails.
It seems the return value on Windows using mingw compiler wraps around,
so the initial test using :s/./b/9999999999999999999999999990 doesn't
fail there, since the count is wrapping around several times and finally
is no longer larger than 2147483647. So let's just use 2147483647 in the
test, which hopefully will always cause a failure
ac63787734
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Test for expanding "~" in substitute takes too long.
Solution: Disable the test for now.
916d6dd5b1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when expanding "~" in substitute causes very long text.
Solution: Limit the text length to MAXCOL.
ab9a2d884b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Use the XTGETTCAP sequence to determine if the host terminal supports
the OSC 52 sequence and, if it does, enable the OSC 52 clipboard
provider by default.
This is only done automatically when all of the following are true:
1. Nvim is running in the TUI
2. 'clipboard' is not set to unnamed or unnamedplus
3. g:clipboard is unset
4. Nvim is running in an SSH connection ($SSH_TTY is set)
5. Nvim is not running inside tmux ($TMUX is unset)
When writing large amounts of data to the tty it is common to first hide
the cursor to avoid a flickering effect. This has been done in Nvim for
a long time and was implemented in the function that actually flushed
the TUI buffer out to the TTY.
However, when using synchronized updates with the 'termsync' option this
is no longer necessary, as the terminal emulator will buffer all of the
updates and display them atomically. Thus there is no need to toggle the
cursor visibility when flushing the buffer when synchronized updates are
used. In fact, doing so can actually reintroduce cursor flickering in
certain scenarios because the visibility state is itself being
synchronized by the terminal.
In addition, the management of the cursor visibility should not happen
when the TUI _buffer_ is flushed, but rather when the TUI itself is
flushed. This is a subtle but meaningful distinction: the former
literally writes bytes to the TTY while the latter flushes the TUI's
grid into its buffer. There is no need to hide the cursor every time we
write bytes to the TTY, only at the beginning of a full TUI "flush"
event.
This fixes an error that can occur in certain pathological cases when
the autocommand fires at just the right time such that it attempts to
close the timer after the timer has already exited, but before the
scheduled callback has fired.
We now let the timer continue to run even when the autocommand deletes
itself to avoid having to repeat the cleanup code multiple times. There
is no harm in letting the timer execute if the autocommand does not
exist, as the pcall will catch the error.
Problem: wast filetype should be replaced by wat filetype
Solution: start using the official wat filetype name
runtime: rename `wast` filetype to `wat` (Wasm text format)
The problem is the name of the current filetype wast. When the plugin
was initially created, the file extension for Wasm text format was not
fixed and .wast was more popular.
However, recently .wat became the official file extension for
WebAssembly text (WAT) format and .wast is now a file extension for the
unofficial WAST format, which is a superset of .wat for the convenience
to describe the Wasm specification conformance tests.
https://webassembly.js.org/docs/contrib-wat-vs-wast.html
However for now, let's keep using the `wat` filetype even for the .wast
extension, so that we at least do not lose the filetype settings and
syntax highlighting. This can be adjusted later, if it turns out to have
a separate need for.
closes: vim/vim#13533bc8f79d36a
Co-authored-by: rhysd <lin90162@yahoo.co.jp>
The 'termsync' option enables a mode (provided the underlying terminal
supports it) where all screen updates during a redraw cycle are buffered
and drawn together when the redraw is complete. This eliminates tearing
or flickering in cases where Nvim redraws slower than the terminal
redraws the screen.
Problem:
Platform-specific UI providers should live in `vim.ui.*`. #24164
Solution:
- Move `vim.clipboard.osc52` module to `vim.ui.clipboard.osc52`.
- TODO: move all of `clipboard.vim` to `vim.ui.clipboard`.
ref #25872
Problem:
'nofsync' may lose data if the system has a hard shutdown. #9888
Solution:
Change default to 'fsync'. This may be revisited in the future when
'nofsync' can be made safer.
If Nvim is in the process of exiting then we do not want to allocate any
new refs onto the event loop, because they will not be freed and will
result in a memory leak.
libtermkey does not interpret OSC sequences that end with a BEL (0x07)
instead of an ST (0x1b 0x5c) terminator. This causes these tests to fail
since the OSC response is now parsed via libtermkey. Change the tests to
use the ST terminator to appease libtermkey.
Problem:
Numerous Vim 8.1 patches are listed by `vim-patch.sh -l`.
Solution:
Mark the following patches as N/A:
obviated by $NVIM env var:
vim-patch:8.1.0049 shell cannot tell running in a terminal window
vim-patch:8.1.0050 $VIM_TERMINAL is also set when not in a terminal window
'termwinkey' is not supported by Nvim:
vim-patch:8.1.0072 use of 'termwinkey' is inconsistent
Nvim handles STOP signal via libuv:
vim-patch:8.1.0304 no redraw when using a STOP signal on Vim and then CONT
vim-patch:8.1.0312 wrong type for flags used in signal handlers
Nvim does not have `parse_queued_messages`:
vim-patch:8.1.0367 getchar(1) no longer processes pending messages
N/A various:
vim-patch:8.1.1396 'wincolor' does not apply to lines below the buffer
vim-patch:8.1.1502 cannot play any sound
vim-patch:8.1.1515 memory leak reported for sound when build with EXITFREE
Nvim has extmarks instead of textprops:
vim-patch:8.1.0579 cannot attach properties to text
vim-patch:8.1.0582 text properties are not enabled
vim-patch:8.1.0634 text properties cannot cross line boundaries
vim-patch:8.1.0638 text property highlighting is off by one column
vim-patch:8.1.0639 text properties test fails on MS-Windows
vim-patch:8.1.0643 computing byte offset wrong
vim-patch:8.1.0654 when deleting a line text property flags are not adjusted
vim-patch:8.1.0655 when appending a line text property flags are not added
vim-patch:8.1.0663 text property display wrong when 'number' is set
vim-patch:8.1.0665 text property display wrong when 'spell' is set
vim-patch:8.1.0667 textprop test leaves file behind
vim-patch:8.1.0675 text property column in screen columns is not practical
vim-patch:8.1.0676 textprop screendump test fails
vim-patch:8.1.0681 text properties as not adjusted for deleted text
vim-patch:8.1.0682 text properties not adjusted when backspacing replaced text
vim-patch:8.1.0688 text properties are not restored by undo
vim-patch:8.1.0689 undo with text properties not tested
vim-patch:8.1.0690 setline() and setbufline() do not clear text properties
vim-patch:8.1.0691 text properties are not adjusted for :substitute
vim-patch:8.1.0694 when using text props may free memory that is not allocated
vim-patch:8.1.0703 compiler warnings with 64-bit compiler
vim-patch:8.1.0707 text property columns are not adjusted for changed indent
vim-patch:8.1.0970 text properties test fails when 'encoding' is not utf-8
vim-patch:8.1.1035 prop_remove() second argument is not optional
vim-patch:8.1.1276 cannot combine text properties with syntax highlighting
vim-patch:8.1.1278 missing change for "combine" field
vim-patch:8.1.1333 text properties don't always move after changes
vim-patch:8.1.1337 get empty text prop when splitting line just after text prop
vim-patch:8.1.1341 text properties are lost when joining lines
vim-patch:8.1.1343 text properties not adjusted for Visual block mode delete
vim-patch:8.1.1340 attributes from 'cursorline' overwrite textprop
vim-patch:8.1.1351 text property wrong after :substitute
vim-patch:8.1.1359 text property wrong after :substitute with backslash
vim-patch:8.1.1387 calling prop_add() in an empty buffer doesn't work
vim-patch:8.1.1388 errors when calling prop_remove() for an unloaded buffer
vim-patch:8.1.1463 gcc warns for uninitialized variable
N/A Nvim has buf_attach instead of "listeners":
vim-patch:8.1.1320 it is not possible to track changes to a buffer
vim-patch:8.1.1321 no docs or tests for listener functions
vim-patch:8.1.1326 no test for listener with partial
vim-patch:8.1.1328 no test for listener with undo operation
vim-patch:8.1.1332 cannot flush listeners without redrawing, mix of changes
vim-patch:8.1.1335 listener callback is called after inserting text
vim-patch:8.1.1419 listener callbacks may be called recursively
vim-patch:8.1.1486 a listener change is merged even when it adds a line
N/A build issues:
vim-patch:8.1.0601 a few compiler warnings
vim-patch:8.1.0612 cannot use two global runtime dirs with configure
vim-patch:8.1.0684 warnings from 64-bit compiler
vim-patch:8.1.1344 Coverity complains about possibly using a NULL pointer
vim-patch:8.1.1376 warnings for size_t/int mixups
vim-patch:8.1.1414 alloc() returning "char_u *" causes a lot of type casts
vim-patch:8.1.1508 sound keeps failing on Travis
vim-patch:8.1.1494 build failure
N/A terminal / job control patches:
vim-patch:8.1.0761 default value for brief_wait is wrong
vim-patch:8.1.0824 SunOS/Solaris has a problem with ttys
vim-patch:8.1.0845 having job_status() free the job causes problems
vim-patch:8.1.0870 Vim doesn't use the new ConPTY support in Windows 10
vim-patch:8.1.0880 MS-Windows: inconsistent selection of winpty/conpty
vim-patch:8.1.0890 pty allocation wrong if using file for out channel
vim-patch:8.1.0906 using clumsy way to get console window handle
vim-patch:8.1.0909 MS-Windows: using ConPTY even though it is not stable
vim-patch:8.1.0928 stray log function call
vim-patch:8.1.0940 MS-Windows console resizing not handled properly
vim-patch:8.1.1028 MS-Windows: memory leak when creating terminal fails
vim-patch:8.1.1265 when GPM mouse support is enabled double clicks do not work
vim-patch:8.1.1267 cannot check if GPM mouse support is working
N/A encoding patches:
vim-patch:8.1.0879 MS-Windows: temp name encoding can be wrong
vim-patch:8.1.0895 MS-Windows: dealing with temp name encoding not quite right
vim-patch:8.1.0918 MS-Windows: startup messages are not converted
vim-patch:8.1.1090 MS-Windows: modify_fname() has problems with some 'encoding'
N/A platform patches:
vim-patch:8.1.1103 MS-Windows: old API calls are no longer needed
N/A Lua patches:
vim-patch:8.1.1019 Lua: may garbage collect function reference in use
N/A Nvim has floating windows instead of popup window:
vim-patch:8.1.1329 plans for popup window support are spread out
vim-patch:8.1.1364 design for popup window support needs more details
vim-patch:8.1.1391 no popup window support
vim-patch:8.1.1400 using global pointer for tab-local popups is clumsy
vim-patch:8.1.1399 popup windows not adjusted when switching tabs
vim-patch:8.1.0062 popup menu broken if a callback changes the window layout
vim-patch:8.1.1405 "highlight" option of popup windows not supported
vim-patch:8.1.1406 popup_hide() and popup_show() not implemented yet
vim-patch:8.1.1407 popup_create() does not support text properties
vim-patch:8.1.1410 popup_move() is not implemented yet
vim-patch:8.1.1402 "timer" option of popup windows not supported
vim-patch:8.1.1408 PFL_HIDDEN conflicts with system header file
vim-patch:8.1.1420 popup window size only uses first line length
vim-patch:8.1.1421 drawing "~" line in popup window
vim-patch:8.1.1422 popup_getoptions() not implemented yet
vim-patch:8.1.1423 popup windows use options from current window and buffer
vim-patch:8.1.1426 no test for syntax highlight in popup window
vim-patch:8.1.1427 popup window screenshot test fails
vim-patch:8.1.1428 popup_atcursor() not implemented yet
vim-patch:8.1.1429 "pos" option of popup window not supported yet
vim-patch:8.1.1430 popup window option "wrap" not supported
vim-patch:8.1.1431 popup window listed as "Scratch"
vim-patch:8.1.1432 can't build with eval feature
vim-patch:8.1.1438 some commands cause trouble in a popup window
vim-patch:8.1.1441 popup window filter not yet implemented
vim-patch:8.1.1442 popup windows not considered when the Vim window is resized
vim-patch:8.1.1443 popup window padding and border not implemented yet
vim-patch:8.1.1444 not using double line characters for popup border
vim-patch:8.1.1445 popup window border highlight not implemented yet
vim-patch:8.1.1446 popup window callback not implemented yet
vim-patch:8.1.1447 not allowed to create an empty popup
vim-patch:8.1.1448 statusline is sometimes drawn on top of popup
vim-patch:8.1.1449 popup text truncated at end of screen
vim-patch:8.1.1450 popup window positioning wrong when using padding or borders
vim-patch:8.1.1451 CTRL-L does not clear screen with a popup window
vim-patch:8.1.1452 line and col property of popup windows not properly checked
vim-patch:8.1.1453 popup window "moved" property not implemented yet
vim-patch:8.1.1455 popup_atcursor() not completely implemented
vim-patch:8.1.1459 popup window border looks bad when 'ambiwidth' is "double"
vim-patch:8.1.1460 popup window border characters may be wrong
vim-patch:8.1.1416 popup_getposition() not implemented yet
vim-patch:8.1.1493 redrawing with popups is slow and causes flicker
vim-patch:8.1.1496 popup window height is not recomputed
vim-patch:8.1.1499 ruler not updated after popup window was removed
vim-patch:8.1.1511 matches in a popup window are not displayed properly
vim-patch:8.1.1513 all popup functionality is in functions, except :popupclear
vim-patch:8.1.1517 when a popup changes all windows are redrawn
vim-patch:8.1.1518 crash when setting 'columns' while a popup is visible
vim-patch:8.1.1520 popup windows are ignored when dealing with mouse position
vim-patch:8.1.1521 when a popup window is closed the buffer remains
vim-patch:8.1.1522 poup_notification() not implemented yet
vim-patch:8.1.1495 memory access error
vim-patch:8.1.1497 accessing memory beyond allocated space
N/A already applied:
vim-patch:8.1.1226 {not in Vi} remarks get in the way of useful help text
vim-patch:8.1.1280 remarks about functionality not in Vi clutters the help
Problem: Text properties test fails when 'encoding' is not utf-8.
Solution: Compare with original value of 'encoding'. (Christian Brabandt,
closesvim/vim#3986)
ed79d1e348
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Running tests may leave some files behind.
Solution: Delete the right files. Fix a few typos. (Dominique Pellé,
closesvim/vim#7436ac665c24c9
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot set a directory for a tab page.
Solution: Add the tab-local directory. (Yegappan Lakshmanan, closesvim/vim#4212)
00aa069db8
Session-related changes only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim doesn't use the new ConPTY support in Windows 10.
Solution: Use ConPTY support, if available. (Nobuhiro Takasaki, closesvim/vim#3794)
aa5df7e312
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Terminal windows in a session are not properly restored.
Solution: Add "terminal" in 'sessionoptions'. When possible restore the
command running in a terminal.
4d8bac8bf5
Tests only. Nvim has no equivalent to "norestore" yet.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: matchparen highlight not cleared in completion mode
Solution: Clear matchparen highlighting in completion mode
Remove hard-coded hack in insexpand.c to clear the :3match before
displaying the completion menu.
Add a test for matchparen highlighting. While at it, move all test tests
related to the matchparen plugin into a separate test file.
closes: vim/vim#13493closes: vim/vim#135249588666360
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Tests are flaky because of using a common file name.
Solution: Rename files and directories to be more unique.
61abe7d8f8
Cherry-pick Test_custom_complete_autoload() from patch 8.2.4584.
Cherry-pick test_delete.vim & test_edit.vim changes from patch 9.0.0323.
Cherry-pick test_edit.vim changes from patch 8.2.3637.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Debugger test may fail when $CWD is very long.
Solution: Skip the test if the directory name is too long. (James McCoy,
closesvim/vim#10837)
db7a88db8b
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: Various things no6 properly tested.
Solution: Add various test cases. (Yegappan Lakshmanan, closesvim/vim#10259)
885de449c0
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Crash in debugger when a variable is not available in the current
block.
Solution: Check for a NULL name. (closesvim/vim#9926)
e406ff87c8
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: expression breakpoint not checked in :def function.
Solution: Always compile a function for debugging if there is an expression
breakpoint. (closesvim/vim#8803)
26a4484da2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: crash when debugging a function with line continuation.
Solution: Check for a NULL pointer. (closesvim/vim#8521)
303215d60c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Temp files remain after running tests.
Solution: Delete the right files. (Dominique Pellé, closesvim/vim#8509)
6c72fd51a8
Co-authored-by: Dominique Pelle <dominique.pelle@gmail.com>
Problem: Vim9: breakpoint on "for" does not work.
Solution: Use the right line number in ISN_DEBUG. (closesvim/vim#8486)
6fc0161682
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: debugging lambda does not work.
Solution: Use the compile type of the function when compiling a lambda.
(closesvim/vim#8412)
17d868b8b2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: breakpoint at a comment line does not work.
Solution: Add the comment line number to the debug instruction.
(closesvim/vim#8429)
8cec9273d2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: breakpoint in compiled function not always checked.
Solution: Check for breakpoint when calling compiled function from compiled
function.
2ac4b2536a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot set breakpoint in compiled function.
Solution: Check for breakpoint when calling a function.
4f8f54280f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: debugger shows too many lines.
Solution: Truncate at a comment, "enddef", etc. (closesvim/vim#8392)
59b50c3bee
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim: when debugging only the first line of a command using line
continuation is displayed.
Solution: Find the next command and concatenate lines until that one.
(closesvim/vim#8392)
4cea536bdf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot get argument values during debugging.
Solution: Lookup names in the list of arguments. Put debug instruction
halfway for command.
6bc30b05e6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: when debugging cannot inspect local variables.
Solution: Make local variables available when debugging.
b69c6fb7b4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: recursive callback may cause issues on some archs
Solution: Decrease the limit drastically to 20
Recursive callback limit causes problems on some architectures
Since commit 47510f3d6598a1218958c03ed11337a43b73f48d we have a test
that causes a recursive popup callback function to be executed. However
it seems the current limit of 'maxfuncdepth' option value is still too
recursive for some 32bit architectures (e.g. 32bit ARM).
So instead of allowing a default limit of 100 (default value for
'maxfuncdepth'), let's reduce this limit to 20. I don't think there is a
use case where one would need such a high recursive callback limit and a
limit of 20 seems reasonable (although it is currently hard-coded).
closes: vim/vim#13495closes: vim/vim#135022076463e38
Co-authored-by: Christian Brabandt <cb@256bit.org>
We already have an extensive suite of static analysis tools we use,
which causes a fair bit of redundancy as we get duplicate warnings. PVS
is also prone to give false warnings which creates a lot of work to
identify and disable.
refactor!: `vim.lsp.inlay_hint()` -> `vim.lsp.inlay_hint.enable()`
Problem:
The LSP specification allows inlay hints to include tooltips, clickable
label parts, and code actions; but Neovim provides no API to query for
these.
Solution:
Add minimal viable extension point from which plugins can query for
inlay hints in a range, in order to build functionality on top of.
Possible Next Steps
---
- Add `virt_text_idx` field to `vim.fn.getmousepos()` return value, for
usage in mappings of `<LeftMouse>`, `<C-LeftMouse>`, etc
runtime(vim): Improve :let-heredoc syntax highlighting (vim/vim#12923)
"trim" and "eval" are allowed in any order and whitespace is not
required after "=<<".
9358b8d993
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: CI: test_termdebug fails
Solution: only test for a changed winlayout, if the window
width actually changed
Also, include an unrelated comment (which doesn't warrant its own patch
number)
305127f9f2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Terminal test for current directory not used on FreeBSD.
Solution: Make it work on FreeBSD. (Ozaki Kiichi, closesvim/vim#9516) Add
TermWait() inside Run_shell_in_terminal() as a generic solution.
ced2b38a56
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Not easy to filter the output of maplist().
Solution: Add mode_bits to the dictionary. (Ernie Rael, closesvim/vim#10356)
d8f5f76621
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: It is not easy to restore saved mappings.
Solution: Make mapset() accept a dict argument. (Ernie Rael, closesvim/vim#10295)
51d04d16f2
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Can only get a list of mappings.
Solution: Add the optional {abbr} argument. (Ernie Rael, closesvim/vim#10277)
Rename to maplist(). Rename test file.
09661203ec
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Not simple programmatic way to find a specific mapping.
Solution: Add getmappings(). (Ernie Rael, closesvim/vim#10273)
659c240cf7
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: maparg() does not indicate the type of script where it was defined.
Solution: Add "scriptversion".
a9528b39a6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: still some issues with term_debug test
Solution: Use WaitForAssert()
closes: vim/vim#1293685c3a5bc26
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: No tests for the termdebug plugin
Solution: Add some simple tests for the termdebug plugin
closes: vim/vim#1292758f39d89a8
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: vim/vim#13366closes: vim/vim#134886a650bf696
Co-authored-by: Christian Brabandt <cb@256bit.org>
When pasting with OSC 52 some terminals show a prompt to the user asking
for permission to read from the system clipboard. When this prompt
appears, 1s is not long enough to wait.
Increase the timeout to 10s and show a message to the user indicating
how to interrupt the wait after 1s.
Problem: No way to have extmarks automatically removed when the range it
is attached to is deleted.
Solution: Add new 'invalidate' property that will hide a mark when the
entirety of its range is deleted. When "undo_restore" is set
to false, delete the mark from the buffer instead.
When the contents of a quickfix buffer are replaced, there is a chance
that deletion of the previous lines fails. This ensures that we don't
get stuck in an infinite loop of retrying.
Fix#25402
This ensures that the read stream never overflows termkey's internal
buffer. This only happens when a large amount of bytes are pushed into
termkey at the same time, which is exactly what happens when we receive
a large OSC 52 response.
This allow distributions and other interested parties to use a system
busted rather than the on neovim bundles by passing the
-D USE_BUNDLED_BUSTED=ON flag to cmake when building.
Closes https://github.com/neovim/neovim/issues/23814.
Python3 provider tests suddenly became extremely flaky on macos for
unknown reasons. For some reason, installing python with the
setup-python action over using the default python fixes the flakiness.
Use this workaround for the time being to unblock CI while we figure out
the root cause.
When the terminal emulator sends an OSC sequence to Nvim (as a response
to another OSC sequence that was first sent by Nvim), populate the OSC
sequence in the v:termresponse variable and fire the TermResponse event.
The escape sequence is also included in the "data" field of the
autocommand callback when the autocommand is defined in Lua.
This makes use of the already documented but unimplemented TermResponse
event. This event exists in Vim but is only fired when Vim receives a
primary device attributes response.
Fixes: https://github.com/neovim/neovim/issues/25856
Problem: tests: failure in test_arabic
Solution: adjust the test for the changed arabic keymap
2a94e98792
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(tar): improve the error detection
Do not rely on the fact, that the last line matches warning, error,
inappropriate or unrecognized to determine if an error occurred. It
could also be a file, contains such a keyword.
So make the error detection slightly more strict and only assume an
error occured, if in addition to those 4 keywords, also a space matches
(this assumes the error message contains a space), which luckily on Unix
not many files match by default.
The whole if condition seems however slightly dubious. In case an error
happened, this would probably already be caught in the previous if
statement, since this checks for the return code of the tar program.
There may however be tar implementations, that do not set the exit code
for some kind of error (but print an error message)? But let's keep this
check for now, not many people have noticed this behaviour until now, so
it seems to work reasonably well anyhow.
related: vim/vim#6425fixes: vim/vim#134893d37231437
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(dist): Make dist/vim.vim work properly when lacking vim9script support (vim/vim#13487)
`:return` cannot be used outside of `:function` (or `:def`) in older Vims
lacking Vim9script support or in Neovim, even when evaluation is being skipped
in the dead `:else` branch.
Instead, use the pattern described in `:h vim9-mix`, which uses `:finish` to end
script processing before it reaches the vim9script stuff.
b2a4c110a5
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
runtime(dist): add legacy version for central vim library
Also, enable the zip and gzip plugins by default, unless those variables
were not explicitly set by the user.
related: vim/vim#134134f174f0de9
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(dist): centralize safe executable check and add vim library (vim/vim#13413)
Follow up to 816fbcc26 (patch 9.0.1833: [security] runtime file fixes,
2023-08-31) and f7ac0ef50 (runtime: don't execute external commands when
loading ftplugins, 2023-09-06).
This puts the logic for safe executable checks in a single place, by introducing
a central vim library, so all filetypes benefit from consistency.
Notable changes:
- dist#vim because the (autoload) namespace for a new runtime support
library. Supporting functions should get documentation. It might make
life easier for NeoVim devs to make the documentation a new file
rather than cram it into existing files, though we may want
cross-references to it somewhere…
- The gzip and zip plugins need to be opted into by enabling execution
of those programs (or the global plugin_exec). This needs
documentation or discussion.
- This fixes a bug in the zig plugin: code setting s:tmp_cwd was removed
in f7ac0ef50 (runtime: don't execute external commands when loading
ftplugins, 2023-09-06), but the variable was still referenced. Since
the new function takes care of that automatically, the variable is no
longer needed.
cd8a3eaf53
Co-authored-by: D. Ben Knoble <ben.knoble+github@gmail.com>
We do not have any patches that we use at the moment, so git is not
needed right now. Futhermore, we've become more strict with not adding
patches, which makes it pretty safe to remove this for the time being.
It is enabled with ENABLE_ASAN_UBSAN like other compilers. Technically
it only enables ASAN as UBSAN is not available, meaning to make the
variable names fully correct we'd need to separate it into two checks:
ENABLE_ASAN and ENABLE_UBSAN, but the convenience of combining them into
the same flag outweighs the theoretical correctness.
Also note in CONTRIBUTING.md that debug builds in ASAN is not supported.
Technically it is the debug runtime that is not supported, which cmake
automatically enables when using the debug build type. However, neovim
can't be built with debug builds without linking to the debug runtime
since the third party libraries has likely been linked to the debug
runtime if it was built with debug build type. This technicality is
likely uninteresting to the potential developer and it's easier to just
say to use a release build type.
problem: checks for wp->w_p_rl are all over the place, making simple
things like "advance column one cell" incredibly complicated.
solution: always fill linebuf_char[] using an incrementing counter,
and then mirror the buffer as a post-processing step
This was "easier" that I first feared, because the stupid but simple
workaround for things like keeping linenumbers still left-right,
e.g. "mirror them and them mirror them once more" is more or less
what vim did already. So let's just keep doing that.
long is 32 bits on windows, while it is 64 bits on other architectures.
This makes the type suboptimal for a codebase meant to be
cross-platform. Replace it with more appropriate integer types.
It is a design goal of extmarks that they allow precise tracking
of changes across undo/redo, including restore the exact positions
after a do/undo or undo/redo cycle. However this behavior is not useful
for all usecases. Many plugins won't keep marks around for long after
text changes, but uses them more like a cache until some external source
(like LSP semantic highlights) has fully updated to changed text and
then will explicitly readjust/replace extmarks as needed.
Add a "undo_restore" flag which is true by default (matches existing
behavior) but can be set to false to opt-out of this behavior.
Delete dead u_extmark_set() code.
regext_bt.c and regexp_nfa.c are inlined into regexp.c instead of
included as a header. This makes developer tools like clang-tidy and
clangd be able to understand the code better.
- silence false warnings on MSVC
- merge `clang-tidy` cmake target into `lintc` and remove the
corresponding make target
- use cmake's built-in endianness detection
Problem: complete_info() skips entries with 'noselect'
Solution: Check, if first entry is at original text state
Unfortunately, Commit daef8c74375141974d61b85199b383017644978c
introduced a regression, that when ':set completeopt+=noselect' is set
and no completion item has been selected yet, it did not fill the
complete_info['items'] list.
This happened, because the current match item did not have the
CP_ORIGINAL_TEXT flag set and then the cp->prev pointer did point to the
original flag item, which caused the following while loop to not being
run but being skipped instead.
So when the 'noselect' is set, only start with to the previous selection
item, if the initial completion item has the CP_ORIGINAL_TEXT flag set,
else use the 2nd previous item instead.
fixes: vim/vim#13451closes: vim/vim#1345257f9ce1a09
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(sh): Update sh syntax and add shDerefOffset to shDerefVarArray for bash (vim/vim#13480)
Add shDerefOffset to shDerefVarArray.
Example code:
```bash
declare -a a=({a..z})
echo "${a[@]:1:3}"
```
ce3b0136c6
Co-authored-by: Lucien Grondin <grondilu@yahoo.fr>
runtime(script.vim): make strace ft check less strict (vim/vim#13482)
Strace output, depending on parameters (-ttf this time), can dump both
times and pid:
1038 07:14:20.959262 execve("./e.py", ["./e.py"], 0x7ffca1422840 /* 51 vars */) = 0 <0.000150>
So loose the regexp matching this, so that the above is matched too.
Fixesvim/vim#13481.
2f54c13292
Co-authored-by: Jiri Slaby <jirislaby@gmail.com>
Co-authored-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
`code_action` used the same parameters for all clients, which led to the
following warning and incorrect start/end column locations if using
clients with mixed encodings:
warning: multiple different client offset_encodings detected for
buffer, this is not supported yet
refactor: use a more idiomatic loop to iterate over the cells
There are two cases in which the following assertion would fail:
```c
assert(g->icell < g->ncells);
```
1. If `g->ncells = 0`. Update this to be legal.
2. If an EOF is reached while parsing `wrap`. In this case, the unpacker
attempts to resume from `cells`, which is a bug. Create a new state
for parsing `wrap`.
Reference: https://neovim.io/doc/user/ui.html#ui-event-grid_line
Previously, 'rightleftcmd' was implemented by having all code which
would affect msg_col or output screen cells be conditional on `cmdmsg_rl`.
This change removes all that and instead implements rightleft as a
mirroring post-processing step.
In cases where the generated files depend on changes to Nvim itself,
generating the files with an older version of Nvim will fail because
those changes are not present in the older version.
For example, if a new option is added then the generator script should
be run with the version of Nvim that contains the new option, or else
the generation will fail.
Co-authored-by: dundargoc <gocdundar@gmail.com>
These are meant for expensive or situational tests that may not be
suitable to run each time, but can occasionally be useful.
Currently only add testing for s390x. The job is enabled by adding the
ci-s390x label in github.
connection from any channel or stdio will unblock
remote_ui_wait_for_attach. Wait on stdio only if
only —embed specified, if both —embed and
—listen then wait on any channel.
Problem: Currently there is no way of customizing behavior of
`declaration`, `definition`, `typeDefinition`, and `implementation`
methods in `vim.lsp.buf` when LSP server returns `Location`. Instead,
cursor jumps to that location directly.
Solution: Normalize LSP response to be `Location[]` for those four cases.
Problem: `os_doskip` seems to be unnecessary since everything that sets it to true also returns an error, and `errmsg` being non-`NULL` already skips most of the processing.
Solution: Remove `os_doskip`.
While the interfaces for setting number and boolean options are now unified by #25394, there is still a separate `set_string_option` function that is used for setting a string option. This PR removes that function and merges it with set_option.
BREAKING CHANGE: `v:option_old` is now the old global value for all global-local options, instead of just string global-local options. Local value for a global-local number/boolean option is now unset when the option is set (e.g. using `:set` or `nvim_set_option_value`) without a scope, which means they now behave the same way as string options.
Ref: #25672
runtime(sh): add shDblParen to shLoopList for bash (vim/vim#13445)
add shDblParen to shLoopList to correctly highlight
arithmetic expressions for Bash and Ksh
This should allow code such as:
```bash
declare -i i j
for i in foo bar
do ((j = 1 << j))
done
```
a390e984db
Co-authored-by: Lucien Grondin <grondilu@yahoo.fr>
runtime(doc): all secure options should note this restriction in the documentation (vim/vim#13448)
Problem: Not all secure options document their status
Solution: Describe secure context :set restrictions in each help entry
8ebdbc9e6d
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: With 'smoothscroll' set, "w_skipcol" is not reset when unsetting 'wrap'.
Resulting in incorrect calculation of the cursor position.
Solution: Reset "w_skipcol" when unsetting 'wrap'.
fixes: vim/vim#12970closes: vim/vim#134391bf1bf569b
Problem: TextChangedI may not always trigger
Solution: trigger it in more cases: for insert/
append/change operations, and when
opening a new line,
fixes: vim/vim#13367closes: vim/vim#133754bca4897a1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security] disallow setting env in restricted mode
Solution: Setting environment variables in restricted mode could
potentially be used to execute shell commands. Disallow this.
restricted mode: disable allow setting of environment variables
Setting environment variables in restricted mode, may have some unwanted
consequences. So, for example by setting $GCONV_PATH in restricted mode
and then calling the iconv() function, one may be able to execute some
unwanted payload, because the `iconv_open()` function internally uses
the `$GCONV_PATH` variable to find its conversion data.
So let's disable setting environment variables, even so this is no
complete protection, since we are not clearing the existing environment.
I tried a few ways but wasn't successful :(
One could also argue to disable the iconv() function completely in
restricted mode, but who knows what other API functions can be
influenced by setting some other unrelated environment variables.
So let's leave it as it is currently.
closes: vim/vim#13394
See: https://huntr.com/bounties/b0a2eda1-459c-4e36-98e6-0cc7d7faccfe/6b89dd6a72
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Completion menu may be wrong
Solution: Check for the original direction of the completion menu,
add more tests, make it work with 'noselect'
completion: move in right direction when filling completion_info()
When moving through the insert completion menu and switching directions,
we need to make sure we start at the correct position in the list and
move correctly forward/backwards through it, so that we do not skip
entries and the selected item points to the correct entry in the list
of completion entries generated by the completion_info() function.
The general case is this:
1) CTRL-X CTRL-N, we will traverse the list starting from
compl_first_match and then go forwards (using the cp->next pointer)
through the list (skipping the very first entry, which has the
CP_ORIGINAL_TEXT flag set (since that is the empty/non-selected entry
2) CTRL-X CTRL-P, we will traverse the list starting from
compl_first_match (which now points to the last entry). The previous
entry will have the CP_ORIGINAL_TEXT flag set, so we need to start
traversing the list from the second prev pointer.
There are in fact 2 special cases after starting the completion menu
with CTRL-X:
3) CTRL-N and then going backwards by pressing CTRL-P again.
compl_first_match will point to the same entry as in step 1 above,
but since compl_dir_foward() has been switched by pressing CTRL-P
to backwards we need to pretend to be in still in case 1 and still
traverse the list in forward direction using the cp_next pointer
4) CTRL-P and then going forwards by pressing CTRL-N again.
compl_first_match will point to the same entry as in step 2 above,
but since compl_dir_foward() has been switched by pressing CTRL-N
to forwards we need to pretend to be in still in case 2 and still
traverse the list in backward direction using the cp_prev pointer
For the 'noselect' case however, this is slightly different again. When
going backwards, we only need to go one cp_prev pointer back. And
resting of the direction works again slightly different. So we need to
take the noselect option into account when deciding in which direction
to iterate through the list of matches.
related: vim/vim#13402
related: vim/vim#12971closes: vim/vim#13408daef8c7437
Co-authored-by: Christian Brabandt <cb@256bit.org>
The prefix option of the diagnostic virtual text can be a function,
but previously it was only a function of diagnostic.
This function should also have additional parameters index and total,
more consistently and similarily as in the prefix function for
`vim.diagnostic.open_float()`.
These additional parameters will be useful when there are too many
number of diagnostics in a single line.
runtime(debian): update debian related runtime files (vim/vim#13423)
* Update Debian runtime files
Add mantic as a supported Ubuntu release and move buster/kinetic to
unsupported.
Add syntax highlighting for deb822sources filetype.
Add debsources ftplugin to set relevant comment options.
Move common version information to shared/debversions.vim
Closesvim/vim#11934
* Add myself as codeowner for Debian-related runtime files
---------
7b7cda67a1
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Co-authored-by: James Addison <jay@jp-hosting.net>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Co-authored-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Co-authored-by: James Addison <jay@jp-hosting.net>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: vim/vim#1342510407df7a9
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Problem: [security] overflow in :history
Solution: Check that value fits into int
The get_list_range() function, used to parse numbers for the :history
and :clist command internally uses long variables to store the numbers.
However function arguments are integer pointers, which can then
overflow.
Check that the return value from the vim_str2nr() function is not larger
than INT_MAX and if yes, bail out with an error. I guess nobody uses a
cmdline/clist history that needs so many entries... (famous last words).
It is only a moderate vulnerability, so impact should be low.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-q22m-h7m2-9mgm9198c1f2b1
N/A patch:
vim-patch:9.0.2073: typo in quickfix.c comments
Co-authored-by: Christian Brabandt <cb@256bit.org>
Fixes a regression from 5e5f5174e3
Until that commit we had a logic like this:
`local prefix = startbyte and line:sub(startbyte + 1) or line_to_cursor:sub(word_boundary)`
The commit changed the logic and no longer cut off the line at the cursor, resulting in a prefix that included trailing characters
Problem:
`win_get_bordertext_col` returns column < 1 for right or center
aligned text, if its length is more than window width.
Solution:
Return max(resulting_column, 1)
Problem: cannot use buffer-number for errorformat
Solution: add support for parsing a buffer number using '%b' in
'errorformat'
closes: vim/vim#13419b731800522
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: EXPAND flag set for filetype option
Solution: Remove P_EXPAND flag from the 'filetype' option
Remove P_EXPAND flag from the 'filetype' option
Problem: P_EXPAND flag is erroneously set for 'filetype' option
Solution: Remove the P_EXPAND flag
This flag is used by string options that accept file path values. See
:help set_env.
This appears to have been included in d5e8c92 and resulted from an
incorrect implementation of 'filetype' completion.
See vim/vim#12900 for a small discussion.
related: vim/vim#12900closes: vim/vim#134163932072ab4
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.orgcloses: vim/vim#13400c038427d2a
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: vim/vim#13401ae9021a840
Co-authored-by: Guido Cella <guido@guidocella.xyz>
runtime(vim): Update ftplugin - comment motions (vim/vim#13412)
Fix the pattern used by comment-motion mappings to match the start of a
block comment.
Block-comment start lines were being ignored if the previous line
contained a double-quote character anywhere in the line. Line comments
should only be ignored if the previous line is a full-line comment and,
therefore, part of the current block comment.
fea96c00e5
Co-authored-by: dkearns <dougkearns@gmail.com>
Fixes https://github.com/neovim/neovim/issues/25177
I initially wanted to split this into a refactor commit to make it more
testable, but it appears that already accidentally fixed the issue by
normalizing lnum/col to 0-indexing
This will run the three test suites (unit, functional and old) in
parallel, meaning that neovim is built for each test and run separately.
This has a slight increase in total CI usage, but it allows rerunning
only the specific test suite that failed for flaky tests, which will
save some time.
Ideally we'd remove any drawbacks by building neovim once and reusing it
for each test suite, but that is not currently possible due to poor
upload/download speeds of the upload-artifact and download-artifact
actions. This has been addressed in
https://github.com/actions/toolkit/pull/1488, but will only be made
available in upload-artifact@v4 and download-artifact@v4.
Problem: #25716 removed the logic for getting the correct value of the `'modified'` option when using `nvim_buf_get_option()`. So the function now returns an incorrect value of `'modified'` for scratch buffers.
Solution: Re-add the logic for getting the correct value of `'modified'`. Also make it so that the logic only exists in one place instead of being duplicated across multiple places in the code.
Problem: tests: avoid error when no swap files exist
Solution: use unlet! so that no error message is reported
in case the variable does not exists
When s:GetSwapFileList() does not find any swapfiles, it will return an
empty list []. This means, that the variable 'name' will not be
declared, cause the following unlet command to fail and causing a 1 sec
delay on running the tests.
So let's instead use the :unlet! command which simply skips reporting an
error when the variable given as parameter does not exists.
closes: vim/vim#13396a36acb7ac4
matchparen: do not use hard-coded match id (vim/vim#13393)
* matchparen: do not use hard-coded match id
Instead of using the hard-coded match id 3, which may also be used by
other plugins, let the matchparen plugin use whatever ids are
automatically returned when calling matchaddpos().
For backwards-compatibility, keep the `:3match` call, which will still
use the hard-coded id 3 (as mentioned in :h :3match).
closes: vim/vim#13381d3e277f279
Co-authored-by: Christian Brabandt <cb@256bit.org>
To be more in line with the specification:
> To support the evolution of enumerations the using side of an enumeration shouldn’t fail on an enumeration value it doesn’t know. It should simply ignore it as a value it can use and try to do its best to preserve the value on round trips
Problem: With lots of events, UI flush may be delayed for too long.
Solution: Flush UI when no input is available. This still flushes less
frequently than before #25629, when a flush also happens when
typeahead buffer is empty but input is available.
`SREQ_*` values are now actual typedef'd enums. `get_option_value_strict()` has also been refactored and split into two functions, `get_option_attrs()` for getting the option attributes, and `get_option_value_strict()` for getting the actual value. Moreover, it now returns an `OptVal`. Other miscellaneous refactors have also been made.
Problem: no digraph for quadruple prime
Solution: add quadruple prime digraph using 4'
closes: vim/vim#1338047416d1a74
Co-authored-by: Jonathan Wright <quaggy@gmail.com>
Problem: zig filetype detection test wrong
Solution: Remove .zir pattern, add new test for .zon pattern
closes: vim/vim#13389a8c664a042
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Vim9: crash with deferred function call and exception
Solution: Save and restore exception state
Crash when a deferred function is called after an exception and another
exception is thrown
closes: vim/vim#13376closes: vim/vim#13377c59c1e0d88
The change in check_due_timer() is N/A as Nvim calls timer callbacks on
the main loop.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Now that all the Find<Foo>.cmake modules are using our custom
find_path2, the bundled deps build needs to include the Find module so
it has access to find_path2.
The missing include was causing the PPA build to fail:
```
cd .deps && \
cmake -G 'Unix Makefiles' \
-DUSE_EXISTING_SRC_DIR=ON -DUSE_BUNDLED_LUAROCKS=OFF -DUSE_BUNDLED_LUAJIT=OFF -DUSE_BUNDLED_GPERF=OFF -DUSE_BUNDLED_LUA=OFF /<<PKGBUILDDIR>>//cmake.deps
-- The C compiler identification is GNU 7.5.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Found GNU Make at /usr/bin/make
-- CMAKE_BUILD_TYPE not specified, default is 'Debug'
-- Performing Test HAS_OG_FLAG
-- Performing Test HAS_OG_FLAG - Success
-- Found Git: /usr/bin/git (found version "2.17.1")
CMake Error at /<<PKGBUILDDIR>>/cmake/FindLuajit.cmake:1 (find_path2):
Unknown CMake command "find_path2".
Call Stack (most recent call first):
cmake/BuildLuv.cmake:13 (find_package)
CMakeLists.txt:127 (include)
-- Configuring incomplete, errors occurred!
```
Problem: tests: checking for swap files takes time
Solution: don't check for swap files when test has been skipped
Check for swap files takes a considerable about of time, so don't do
that for skipped tests to avoid wasting time.
closes: vim/vim#13371a0e1f06f04
Problem: Wrong color for half of wide character next to pum scrollbar.
Solution: Redraw the screen cell with the right color. (closesvim/vim#9874)
35d8c2010e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: vim/vim#133588079917447
vim-patch:9.0.2040: trim(): hard to use default mask
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: vim/vim#133636e6386716f
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: vim/vim#11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: vim/vim#133618f4fb007e4
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: vim/vim#13331)
closes: vim/vim#13362209ec90b9b
Cherry-pick ex_getln.c changes from patch 9.0.2035.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: completion shows current word after completion restart
Solution: remove the word being completed after completion restart
The word being completed is shown in a completion list after completion
restart, because it isn't removed from the current buffer before
searching for matches.
Also adjust `Test_complete_add_onechar` to match the new behavior.
closes: vim/vim#133492e3cd52fa0
Co-authored-by: nwounkn <nwounkn@gmail.com>
Problem:
When enabling diagnostics, there can be diagnostics for unloaded buffer,
but some handlers nevertheless attempt to set extmarks in such buffers.
Solution:
* Exit underline/virtual_text handler if buffer is not loaded.
* Don't require is_loaded as precondition for show(), because handlers
don't necessarily depend on it.
Ensure bundled libraries and include directories are always searched
first before any others. This will provide a more consistent experience
as the search order of the builtin find_ functions can vary depending on
system. This should make the build process faster when building with
bundled deps as we limit the search to only the .deps directory.
Separating the search between .deps and everything makes debugging
find_-related problems simpler if you need to check how dependencies are
found.
For libraries, we divide the search process into the following order:
1. Only search in .deps directory and only search for static libraries.
2. Only search in .deps directory and search for all libraries.
3. Search everywhere and search for all libraries.
Make an exception for FindLibintl.cmake as changing the search order
seems to break some tests on macos.
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
Problem:
If a manpage is opened, its hardwrapped dimensions are not recalculated
after closing then revisiting the same manpage.
Solution:
Unload the manpage when it is hidden. This forces it to be reloaded,
which forces the hard-wrapping to be recalculated when it is revisited.
Fixes: #25457
Problem: gcc overflow-warning for f_resolve
Solution: use pointer p instead of pointer q[-1]
Suppress the following warning:
```
filepath.c: In function ‘f_resolve’:
filepath.c:2162:27: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2162 | q[-1] = NUL;
```
Closes: vim/vim#13352closes: vim/vim#13353215c3261a2
Co-authored-by: Ken Takata <kentkt@csc.jp>
A lot of code inside HAVE_WORKING_LIBINTL doesn't really depend on a
"working libintl". For instance ex_language is also used for ":lang collate"
and ":lang time".
Also ":lang C" should not fail just because translations aren't available (it
just means use the default text).
References:
https://github.com/neovim/neovim/pull/12d00ead2e5
separate ifdefs for locale and gettext got merged together.
8253e29971
Unmotivated switcharoo of get_mess_env() logic. If available, get_locale_val(LC_MESSAGES) is the correct implementation.
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: vim/vim#13335f5a94d5165
Problem: `TextChangedI` can trigger on entering Insert mode if there
was previously a change not in Insert mode.
Solution: Make it trigger only when text is actually changed in Insert
mode.
closes: vim/vim#13265closes: vim/vim#13338d7ae263af8
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: no max callback recursion limit
Solution: bail out, if max call recursion for callback functions
has been reached.
This checks the 'maxfuncdepth' setting and throws E169 when a callback
function recursively calls itself.
closes: vim/vim#13337closes: vim/vim#1333947510f3d65
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(doc): Improve command-line completion docs (vim/vim#13331)
* Improve command-line completion docs
Add more details about 'ignorecase' and its effect on cmdline
completion.
Make sure keys used in wildmenu are properly documented and linked in the
keys' documentation entries, and in `:h index` for proper
cross-referencing, as wildmenu popup is slightly different from
insert-mode popup menu.
* Fix docs typos
2bbd0d30ee
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: vim/vim#13321b583eda703
Problem: Coverity complains about change in charset (after v9.0.2017)
Solution: check pointer t at index 0
closes: vim/vim#13322cd6ee69358
Co-authored-by: Christian Brabandt <cb@256bit.org>
Follw up to 63b3408551
`is_pull` should be optional, otherwise it is an API change that
introduces warnings in consumers.
Also fixes the type annotation of `_client_pull_namespaces` where the
key is a string.
Problem:
The next command after `silent !{cmd}` or `silent lua print('str')`
prints an empty line before printing a message, because these commands
set `msg_didout = true` despite not printing any messages.
Solution:
Set `msg_didout = true` only if `msg_silent == 0`
Problem: Peeking and flushing output slows down execution.
Solution: Do not update the mode message when global_busy is set. Do not
flush when only peeking for a character. (Ken Takata)
cb574f4154
PROBLEM:
Currently `:echoerr` prints multi-line strings in a single line
as `:echom` does (Note: `:echon` can print multi-line strings well).
This makes stacktrace printed via echoerr difficult to read.
Example code:
try
lua error("lua stacktrace")
catch
echoerr v:exception
endtry
Output:
Error detected while processing a.vim[5]..a.vim:
line 4:
Vim(lua):E5108: Error executing lua [string ":lua"]:1: lua stacktrace^@stack traceback:^@^I[C]: in function 'error'^@^I[string ":lua"]:1: in main chunk
SOLUTION:
Allow echoerr to print multiline messages (e.g., lua exceptions),
because this command is usually used to print stacktraces.
Output after the fix:
Error detected while processing a.vim[5]..a.vim:
line 4:
Vim(lua):E5108: Error executing lua [string ":lua"]:1: lua stacktrace
stack traceback:
[C]: in function 'error'
[string ":lua"]:1: in main chunk
Problem: complete_info() returns wrong index
Solution: Make order of 'info' in completion_info consistent
Start the iteration from the same point and follow the same direction as
done when assigning the completion numbers. This way we remove the
dependence on the completion direction and make the order of 'info'
consistent.
closes: vim/vim#12230closes: vim/vim#1297169fb5afb3b
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Vim9: in script cannot set item in uninitialized list.
Solution: When a list is NULL allocate an empty one. (closesvim/vim#8461)
e65081d1b5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: linebreak applies for leading whitespace
Solution: only apply linebreak, once we have found non-breakat chars in
the line
closes: vim/vim#13228closes: vim/vim#13243dd75fcfbdf
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: linebreak applies for leading whitespace
Solution: only apply linebreak, once we have found non-breakat chars in
the line
closes: vim/vim#13228closes: vim/vim#13243dd75fcfbdf
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: INI files not detected
Solution: detect uppercase .INI as dosini files
It previo~1 only worked for lower-case .ini files, but upperc~1 .INI is
also somewhat common on account of DOS' old 8.3 upperc~2 only filena~1.
closes: vim/vim#133164a82bdfaa8
Co-authored-by: Martin Tournoij <martin@arp242.net>
Using fnameescape() for the path argument of findfile() and finddir() is
wrong, as fnameescape() is intended to be used for parts of Ex commands,
not function arguments.
Problem: Certain compilers (primarily GCC) do not recognize an exhaustive enum switch statement as being exhaustive. This manifests in the form of compiler errors in exhaustive switch statements where each case has a return statement but there isn't a catch-all return statements. These compiler errors are spurious in the context of the Neovim codebase. So #25533 added the `UNREACHABLE` macro to denote apart of the code that's unreachable, which was used after every such switch statement to tell the compiler to treat the switch statement as exhaustive. However, the macro is mentioned nowhere in the style guide,and new contributors would not have any natural way of learning about it as it stands now. This would lead to confusion when they inevitably encounter one of these compiler errors.
Solution: Add a style guideline which shows how to use the `UNREACHABLE` macro to fix these compiler errors.
Problem: The style guide states that all switch statements that are not conditional on an enum must have a `default` case, but does not give any explicit guideline for switch statements that are conditional on enums. As a result, a `default` case is added in many enum switch statements, even when the switch statement is exhaustive. This is not ideal because it removes the ability to have compiler errors to easily detect unchanged switch statements when a new possible value for an enum is added.
Solution: Add explicit guidelines for switch statements that are conditional on an enum, clarifying that a `default` case is not necessary if the switch statement is exhaustive. Also refactor pre-existing code with unnecessary `default` cases.
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: vim/vim#13303
related: vim/vim#1330154844857fd
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: test: undofile left behind
Solution: cleanup undofile
fix: tmp file not deleted when running make test_undo
Temporary file `.Xtestfile.txt.un~` was left running `make test_undo`
and vim was configured with:
```
./configure --with-features=normal --enable-gui=no --enable-terminal
```
closes: vim/vim#13304b07b9dc4da
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
This adds the checks in https://neovim.io/doc/reports/clang/ when using
clang-tidy. The strategy is to enable all clang-analyzer checks, and
disable only the checks for the warnings that exist currently. This
allows us to eliminate each warning type without blocking ongoing work,
but also without adding bugs for already eliminated warnings.
The plan is to eventually eliminate https://neovim.io/doc/reports/clang/
by completely integrating it into the clang-tidy check.
Also add make and cmake targets `clang-analyzer` to run this check.
*** CID 466056: Control flow issues (DEADCODE)
/src/nvim/window.c: 6951 in file_name_in_line()
6945 // Search backward for first char of the file name.
6946 // Go one char back to ":" before "//", or to the drive letter before ":\" (even if ":"
6947 // is not in 'isfname').
6948 while (ptr > line) {
6949 if ((len = (size_t)(utf_head_off(line, ptr - 1))) > 0) {
6950 ptr -= len + 1;
>>> CID 466056: Control flow issues (DEADCODE)
>>> Execution cannot reach the expression "path_has_drive_letter(ptr - 2)" inside this statement: "if (vim_isfilec((uint8_t)pt...".
6951 } else if (vim_isfilec((uint8_t)ptr[-1])
6952 || (len >= 2 && path_has_drive_letter(ptr - 2))
6953 || ((options & FNAME_HYP) && path_is_url(ptr - 1))) {
6954 ptr--;
6955 } else {
6956 break;
"VimEnter foo" was accepted as a valid event name for "VimEnter".
Events delimited with commas, eg. "VimEnter,BufRead", were also
accepted, even though only the first event was actually parsed.
Co-authored-by: ii14 <ii14@users.noreply.github.com>
long is 32 bits on windows, while it is 64 bits on other architectures.
This makes the type suboptimal for a codebase meant to be
cross-platform. Replace it with more appropriate integer types.
The 'arabicshape' feature of vim is a transformation of unicode text to
make arabic and some related scripts look better at display time. In
particular the content of a cell will be adjusted depending on the
(original) content of the cells just before and after it.
This is implemented by the arabic_shape() function in nvim. Before this
commit, shaping was invoked in four different contexts:
- when rendering buffer text in win_line()
- in line_putchar() for rendering virtual text
- as part of grid_line_puts, used by messages and statuslines and
similar
- as part of draw_cmdline() for drawing the cmdline
This replaces all these with a post-processing step in grid_put_linebuf(),
which has become the entry point for all text rendering after recent
refactors.
An aim of this is to make the handling of multibyte text yet simpler.
One of the main reasons multibyte chars needs to be "parsed" into
codepoint arrays of composing chars is so that these could be inspected
for the purpose of shaping. This can likely be vastly simplified in many
contexts where only the total length (in bytes) and width of composed
char is needed.
Problem: The style guide currently recommends having a `default:` case for switch statements that are not conditional on an enumerated value. Additionally, it recommends using `assert(false)` if `default:` is unreachable. This is problematic because `assert()` only runs on debug builds, which may lead to confusing breakages in release builds. Moreover, this suggestion is followed nowhere in the C code and `abort()` is used everywhere instead.
Solution: Suggest using `abort()` instead of `assert(false)`, that way the program always terminates if a logically unreachable case is reached.
runtime(sh): Update ftplugin (vim/vim#13213)
Rename 'keywordprg' user command to ShKeywordPrg as this is just a
leaking implementation detail.
2a281ccca0
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: strange error number
Solution: change error number,
add doc tag for E1507
closes: vim/vim#13270ea746f9e86
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem:
On Windows, "gf" fails on a filepath that has a line:column suffix.
Example:
E447: Can't find file "src/app/core/services/identity/identity.service.ts:64:23"
Solution:
- Remove ":" from 'isfname' on Windows. Colon is not a valid filename
character (except for the drive-letter).
- Handle drive letters specially in file_name_in_line().
Fixes#25160
This finalizes the long running refactor from the old TUI-focused grid
implementation where text-drawing cursor was not separated from the
visible cursor.
Still, the pattern of setting cursor position together with updating a
line was convenient. Introduce grid_line_cursor_goto() to still allow
this but now being explicit about it.
Only having batched drawing functions makes code involving drawing
a bit longer. But it is better to be explicit, and this highlights
cases where multiple small redraws can be grouped together. This was the
case for most of the changed places (messages, lastline, and :intro)
> The application shall ensure that the function returns an integer less
than, equal to, or greater than 0, if the first argument is considered
respectively less than, equal to, or greater than the second. If two
members compare as equal, their order in the sorted array is unspecified.
https://pubs.opengroup.org/onlinepubs/009696899/functions/qsort.html
Problem: Scrolling non-current window using mouse is inconsistent
depending on 'scrollbind'/'scrolloff' and different from GUI
vertical scrollbar when 'cursorbind' is set.
Solution: Don't move cursor in non-current windows for 'cursorbind' if
cursor in the current window didn't move.
closes: vim/vim#13219closes: vim/vim#132108e5f26ec6a
Problem: Cannot scroll up in diff mode with many filler lines and zero
'scrolloff'.
Solution: Invalidate w_cline_row before calling comp_botline().
closes: vim/vim#132560583491277
Problem:
The swapfile "E325: ATTENTION" dialog is displayed when editing a file
already open in another (running) Nvim. Usually this behavior is
annoying and irrelevant:
- "Recover" and the other options ("Open readonly", "Quit", "Abort") are
almost never wanted.
- swapfiles are less relevant for "multi-Nvim" since 'autoread' is
enabled by default.
- Even less relevant if user enables 'autowrite'.
Solution:
Define a default SwapExists handler which does the following:
1. If the swapfile is owned by a running Nvim process, automatically
chooses "(E)dit anyway" (caveat: this creates a new, extra swapfile,
which is mostly harmless and ignored except by `:recover` or `nvim -r`.
2. Shows a 1-line "ignoring swapfile..." message.
3. Users can disable the default SwapExists handler via `autocmd! nvim_swapfile`.
long is 32 bits on windows, while it is 64 bits on other architectures.
This makes the type suboptimal for a codebase meant to be
cross-platform. Replace it with more appropriate integer types.
msg_puts_display was more complex than necessary in nvim, as in
nvim, it no longer talks directly with a terminal.
In particular we don't need to scroll the grid before emiting the last
char. The TUI already takes care of things like that, for terminals
where it matters.
Problem: Visual highlight is inconsistent on a folded line with
treesitter foldtext.
Solution: Don't added Folded highlight as it is already in background.
Problem: Clean up cmdline option completion code
Solution: Fix various minor problems
- Fix manual array size calculations to just use `ARRAY_LENGTH()`.
- Fix unintentional typo in comments due to copy-paste error.
- Fix assert_equal() usages to pass the expected value to first
parameter instead of 2nd one to avoid confusion.
- Fix signed vs unsigned warnings
- Correct misplaced comments about set_op_T and set_prefix_T
and fix a typo in another comment
closes: vim/vim#13249closes: vim/vim#132376d11347260
N/A patch:
vim-patch:9.0.1976: style: space before tab in optionstr.c
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: win32: missing '**' expansion test (after v9.0.1947)
Solution: Add test for MS-Windows
win32: Add "**" test
Vim supports "**" on MS-Windows. However, it is not tested by
`Test_glob_extended_bash`.
Unlike Unix, it doesn't use 'shell' and doesn't support {,} expansion.
So, I added as a separate test.
related: vim/vim#13205closes: vim/vim#132504a1ad55564
Co-authored-by: Ken Takata <kentkt@csc.jp>
The haskell-language-server supports resolve only for a subset of code
actions. For many code actions trying to resolve the `edit` property
results in an error, but the unresolved action already contains a
command that can be executed without issue.
The protocol specification is unfortunately a bit vague about this,
and what the haskell-language-server does seems to be valid.
Example:
newtype Dummy = Dummy Int
instance Num Dummy where
Triggering code actions on "Num Dummy" and choosing "Add placeholders
for all missing methods" resulted in:
-32601: No plugin enabled for SMethod_CodeActionResolve, potentially available: explicit-fields, importLens, hlint, overloaded-record-dot
With this change it will insert the missing methods:
instance Num Dummy where
(+) = _
(-) = _
(*) = _
negate = _
abs = _
signum = _
fromInteger = _
Problem: cmdline completion should consider key option
Solution: Disable cmdline completion for key option, slightly
refactor how P_NO_CMD_EXPAND is handled
Harden crypto 'key' option: turn off cmdline completion, disable set-=
"set-=" can be used maliciously with a crypto key, as it allows an
attacker (who either has access to the computer or a plugin author) to
guess a substring by observing the modified state. Simply turn off
set+=/-=/^= for this option as there is no good reason for them to be
used.
Update docs to make that clear as well.
Also, don't allow cmdline completion for 'key' as it just shows *****
which is not useful and confusing to the user what it means (if the user
accidentally hits enter they will have replaced their key with "*****"
instead).
Move logic to better location, don't use above 32-bit for flags
Move P_NO_CMD_EXPAND to use the unused 0x20 instead of going above
32-bits, as currently the flags parameter is only 32-bits on some
systems. Left a comment to warn that future additions will need to
change how the flags work either by making it 64-bit or split into two
member vars.
Also, move the logic for detecting P_NO_CMD_EXPAND earlier so it's not
up to each handler to decide, and you won't see the temporary "..." that
Vim shows while waiting for completion handler to complete.
closes: vim/vim#132246ee7b521fa
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Cmdline completion for 'listchars' fields doesn't include
"multispace" and "leadmultispace" (after 9.0.1958).
Solution: Include "multispace" and "leadmultispace" in lcstab.
closes: vim/vim#132251f025b01e2
Problem: Make CI checks more strict
Solution: Add -Wstrict-prototypes -Wmissing-prototypes to CI,
fix uncovered problems
Add -Wstrict-prototypes -Wmissing-prototypes warnings check to CI
Add two new warnings to CI, silence some Perl related build-warnings:
- `strict-prototypes` helps prevent declaring a function with an empty
argument list, e.g. `int func()`. In C++, that's equivalent to `int
func(void)`, but in C, that means a function that can take any number
of arguments which is rarely what we want.
- `missing-prototypes` makes sure we use `static` for file-only internal
functions. Non-static functions should have been declared on a
prototype file.
- Add `no-compound-token-split-by-macro` to the perl cflags, since it
throws out a bunch of perl-related warnings that make the CI log
unnecessary verbose and hard to read. This seems to happen only with
clang 12 and above.
When applying those changes, it already uncovered a few warnings, so fix
up the code as well (fix prototypes, make the code static, remove
shadowed var declaration)
GTK header needs to have #pragma warning suppressiong because GTK2
headers will warn on `-Wstrict-prototypes`, and it's included by gui.h
and so we can't just turn off the warning in a couple files.
closes: vim/vim#13223closes: vim/vim#13226f7f746b167
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: cannot complete option values
Solution: Add completion functions for several options
Add cmdline tab-completion for setting string options
Add tab-completion for setting string options on the cmdline using
`:set=` (along with `:set+=` and `:set-=`).
The existing tab completion for setting options currently only works
when nothing is typed yet, and it only fills in with the existing value,
e.g. when the user does `:set diffopt=<Tab>` it will be completed to
`set diffopt=internal,filler,closeoff` and nothing else. This isn't too
useful as a user usually wants auto-complete to suggest all the possible
values, such as 'iblank', or 'algorithm:patience'.
For set= and set+=, this adds a new optional callback function for each
option that can be invoked when doing completion. This allows for each
option to have control over how completion works. For example, in
'diffopt', it will suggest the default enumeration, but if `algorithm:`
is selected, it will further suggest different algorithm types like
'meyers' and 'patience'. When using set=, the existing option value will
be filled in as the first choice to preserve the existing behavior. When
using set+= this won't happen as it doesn't make sense.
For flag list options (e.g. 'mouse' and 'guioptions'), completion will
take into account existing typed values (and in the case of set+=, the
existing option value) to make sure it doesn't suggest duplicates.
For set-=, there is a new `ExpandSettingSubtract` function which will
handle flag list and comma-separated options smartly, by only suggesting
values that currently exist in the option.
Note that Vim has some existing code that adds special handling for
'filetype', 'syntax', and misc dir options like 'backupdir'. This change
preserves them as they already work, instead of converting to the new
callback API for each option.
closes: vim/vim#13182900894b09a
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: xattr support fails to build on MacOS X
Solution: Disable xattr support for MacOS X
MacOS X uses the same headers and functions sys/xattr.h but the function
signatures for xattr support are much different, so building fails.
So let's for now disable xattr support there.
closes: vim/vim#13230closes: vim/vim#13232a4dfbfed89
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Configure script may not detect xattr correctly
Solution: include sys/xattr instead of attr/xattr,
make Test_write_with_xattr_support() test
xattr feature correctly
This also applies to the Smack security feature, so change the include
and configure script for it as well.
closes: vim/vim#132296de4e58cf2
Problem: No support for writing extended attributes
Solution: Add extended attribute support for linux
It's been a long standing issue, that if you write a file with extended
attributes and backupcopy is set to no, the file will loose the extended
attributes.
So this patch adds support for retrieving the extended attributes and
copying it to the new file. It currently only works on linux, mainly
because I don't know the different APIs for other systems (BSD, MacOSX and
Solaris). On linux, this should be supported since Kernel 2.4 or
something, so this should be pretty safe to use now.
Enable the extended attribute support with normal builds.
I also added it explicitly to the :version output as well as make it
able to check using `:echo has("xattr")`, to have users easily check
that this is available.
In contrast to the similar support for SELINUX and SMACK support (which
also internally uses extended attributes), I have made this a FEAT_XATTR
define, instead of the similar HAVE_XATTR.
Add a test and change CI to include relevant packages so that CI can
test that extended attributes are correctly written.
closes: vim/vim#306closes: vim/vim#13203e085dfda5d
Co-authored-by: Christian Brabandt <cb@256bit.org>
- Move vimoption_T to option.h
- option_defs.h is for option-related types
- option_vars.h corresponds to Vim's option.h
- option_defs.h and option_vars.h don't include each other
Problem: Custom cmdline completion skips original cmdline when pressing
Ctrl-P at first match if completion function invokes glob().
Solution: Move orig_save into struct expand_T.
closes: vim/vim#1321628a23602e8
Use `tic -x` instead of `tic` to include any unknown capabilities in a modern `terminfo.src` as user-defined ones, instead of dropping them. Modern ncurses behavior with `tic -x` will not change.
The screen grid refactors will continue until morale improves.
Jokes aside, this is quite a central installment in the series.
Before this refactor, there were two fundamentally distinct codepaths
for getting some text on the screen:
- the win_line() -> grid_put_linebuf() -> ui_line() call chain used for
buffer text, with linebuf_char as a temporary scratch buffer
- the grid_line_start/grid_line_puts/grid_line_flush() -> ui_line()
path used for every thing else: statuslines, messages and the command line.
Here the grid->chars[] array itself doubles as a scratch buffer.
With this refactor, the later family of functions still exist, however
they now as well render to linebuf_char just like win_line() did, and
grid_put_linebuf() is called in the end to calculate delta changes.
This means we don't need any duplicate logic for delta calculations anymore.
Later down the line, it will be possible to share more logic operating
on this scratch buffer, like doing 'rightleft' reversal and arabic
shaping as a post-processing step.
Linux added these types to their userspace headers in [6.5], which
causes unit tests to fail like
```
-------- Running tests from test/unit/api/private_helpers_spec.lua
RUN vim_to_object converts true: 17.00 ms ERR
test/unit/helpers.lua:748: test/unit/helpers.lua:732: (string) '
test/unit/helpers.lua:264: ';' expected near '__s128' at line 194'
exit code: 256
stack traceback:
test/unit/helpers.lua:748: in function 'itp_parent'
test/unit/helpers.lua:784: in function <test/unit/helpers.lua:774>
```
Since we don't use these types, they can be ignored to avoid LuaJIT's C
parser choking on them.
[6.5]: 224d80c584
Problem: Vim9: error codes spread out
Solution: group them together and reserve 100
more for future use
Reserve 100 error codes for future enhancements to the Vim9 class
support
closes: vim/vim#13207413f83990f
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Bash Expansion test fails on Windows/MacOS
Solution: Disable Test_glob_extended_bash for now
This test doesn't work on Windows even if bash can be executed, since
the globstar functionality has only been enabled in Unix builds of Vim
(Commit 9eb1ce531527a7177d16373b0f8689bbcd3d5f73, patch 9.0.1946).
closes: vim/vim#1320503ca4002c1
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: filename expansion using ** in bash may fail
Solution: Try to enable the globstar setting
Starting with bash 4.0 it supports extended globbing using the globstar
shell option. This makes matching recursively below a certain directory
using the ** pattern work as expected nowadays. However, we need to
explicitly enable this using the 'shopt -s globstar' bash command.
So let's check the bash environment variable $BASH_VERSINFO (which is
supported since bash 3.0 and conditionally enable the globstar option,
if the major version is at least 4. For older bashs, this at least
shouldn't cause errors (unless one is using really ancient bash 2.X or
something).
closes: vim/vim#13002closes: vim/vim#131449eb1ce5315
Co-authored-by: Christian Brabandt <cb@256bit.org>
Recommend adding a space after i.e. `--- @see`.
The "space" variant is common for the vast majority of docstring formats
such as doxygen, javadoc and typescript.
runtime(rmd) Update ftplugin and syntax files (vim/vim#13193)
ftplugin/rmd.vim:
- Set 'commentstring' dynamically according to code region.
syntax/rmd.vim:
- Include syntax highlighting of fenced languages dynamically.
- Add conceal char for line break.
3474594239
Co-authored-by: Jakson Alves de Aquino <jalvesaq@gmail.com>
Problem:
NVIM_APPNAME does not allow path separators in the name, so relative
paths can't be used:
NVIM_APPNAME="neovim-configs/first-config" nvim
NVIM_APPNAME="neovim-configs/second-config" nvim
Solution:
Let NVIM_APPNAME be a relative path. Absolute paths are not supported.
fix#23056fix#24966
Problem: CursorHoldI event interferes with "CTRL-G U". (Naohiro Ono)
Solution: Restore the flag for "CTRL-G U" after triggering CursorHoldI.
(closesvim/vim#8937)
5a9357d0bf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: TextChanged does not trigger after TextChangedI.
Solution: Store the tick separately for TextChangedI. (Christian Brabandt,
closesvim/vim#8968, closesvim/vim#8932)
db3b44640d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
Some steps in :Tutor don't work on Windows.
Solution:
Add support for `{unix:...,win:...}` format and transform the Tutor contents
depending on the platform.
Fix https://github.com/neovim/neovim/issues/24166
Problem: No commentstring is set for D buffers after removing the
default C-style commentstring
Same solution than neovim#23039
Co-authored-by: Axel Ricard <axel.ricard@allegrodvt.com>
A lot of updated places in the docs were already incorrect since long
since they did not reflect the default behaviour.
"[dos format]" could've been argued being better for discoverability
but that ship has already sailed as it is no longer displayed by default.
This was only used to avoid the effect of SHM_OVERALL. This can easily
be handled in isolation, instead of clearing out all of 'shortmess' which
has unwanted side effects and mystifies what really is going on.
Problem: multispace wrong when scrolling horizontally
Solution: Update position in "multispace" or "leadmultispace" also in
skipped chars. Reorder conditions to be more consistent.
closes: vim/vim#13145closes: vim/vim#13147abc808112e
Problem: missing test for mouse click + 'virtedit'
Solution: Add test for clicking after eol with 'virtualedit' and wrapped
line
closes: vim/vim#1315746a0582ffa
Problem: :bwipe fails after switching window from aucmd_win.
Solution: Decrement b_nwindows after switching back to aucmd_win.
closes: vim/vim#1316046bdae036a
Problem: make test_compilers fails on ubuntu
Solution: set LC_ALL=C
fix: make test_compiler failed on xubuntu 22.04.3
Problem: 'make test_compiler' failed on Linux xubuntu 22.04.3 but
succeeded on e.g. macOS. To reproduce:
```
$ ./configure --with-features=huge --enable-gui=no --enable-perlinterp=yes
$ make -j12
$ cd vim/src/testdir
$ make test_compiler
...snip...
Found errors in Test_compiler():
command line..script /home/dope/sb/vim/src/testdir/runtest.vim[601]..function RunTheTest[54]..Test_compiler line 24: command did not fail: clist
command line..script /home/dope/sb/vim/src/testdir/runtest.vim[601]..function RunTheTest[54]..Test_compiler line 30: Pattern '\\n \\d\\+ Xfoo.pl:3: Global symbol "$foo" requires explicit package name' does not match '\n19 Xfoo.pl:3: Global symbol "$foo" requires explicit package name (did you forget to declare "my $foo"?)'
make: *** [Makefile:70: test_compiler] Error 1
```
Solution: set `LC_ALL` to "C" in `Test_compiler()`
closes: vim/vim#13173ca0ffc0d63
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Problem:
Users using `vim.lsp.start` directly (instead of nvim-lspconfig) need
more visibility for troubleshooting. For example, troubleshooting
unnecesary servers or servers that aren't attaching to expected buffers.
Solution:
Mention attached buffers in the `:checkhealth lsp` report.
Example:
vim.lsp: Active Clients ~
- clangd (id=1, root_dir=~/dev/neovim, attached_to=[7])
- lua_ls (id=2, root_dir=~/dev/neovim, attached_to=[10])
Problem:
Crash from:
set cmdheight=0 redrawdebug=invalid
resize -1
Solution:
Do not invalidate first `p_ch` `msg_grid` rows in `update_screen` when
scrolling the screen down after displaying a message, because they may
be used later for drawing cmdline.
Fixes#22154
Problem:
`:checkhealth nvim` warns about missing vimrc if `init.lua` exists but
`init.vim` does not.
Solution:
Check for any of: init.vim, init.lua, $MYVIMRC.
Fix#25291
The "f" flag was removed in f7da472257.
The value of the "f" flag is no longer listed in the 'shortmess'
description and it cannot be disabled, so having it in the default value
is pointless and confusing.
Oldtests clean up after themselves, and the options that need operators
to align with Vim all deny duplicates, so there is no need to set them
to default.
Also make the variable name that test_listchars.vim uses to align with
Vim more obvious.
Not everything needs to be crazy overconfigurable.
Also fixes a warning in latest clang which didn't approve of
the funky math switch statement in append_arg_number
PROBLEM: The builtin python3 provider cannot auto-detect python3.12
when g:python3_host_prog is not set. As a result, when python3 on $PATH
is currently python 3.12, neovim will fail to load python3 provider
and result in `has("python3") == 0`, e.g.,
"Failed to load python3 host. You can try to see what happened by ..."
ROOT CAUSE: the `system()` call from `provider#pythonx#DetectByModule`
does not ignore python warnings, and `pkgutil.get_loader` will print
a warning message in the very first line:
```
<string>:1: DeprecationWarning: 'pkgutil.get_loader' is deprecated and
slated for removal in Python 3.14; use importlib.util.find_spec() instead
```
SOLUTION:
- Use `importlib.util.find_spec` instead (python >= 3.4)
- Use `-W ignore` option to prevent any potential warning messages
Problem: :unhide does not check for failing to close a window.
Solution: When closing a window fails continue with the next one. Do not
try closing the autocmd window. (closesvim/vim#9984)
6f2465d336
Co-authored-by: Bram Moolenaar <Bram@vim.org>
This is incorrect in the following scenario:
1. The language tree is Lua > Vim > Lua.
2. An edit simultaneously wipes out the `_regions` of all nodes, while
taking the Vim injection off-screen.
3. The Vim injection is not re-parsed, so the child Lua `_regions` is
still `nil`.
4. The child Lua is assumed, incorrectly, to occupy the whole document.
5. This causes the injections to be parsed again, resulting in Lua > Vim
> Lua > Vim.
6. Now, by the same process, Vim ends up with its range assumed over the
whole document. Now the parse is broken and results in broken
highlighting and poor performance.
It should be fine to instead treat an unparsed node as occupying
nothing (i.e. effectively non-existent). Since, either:
- The parent was just parsed, hence defining `_regions`
- The parent was not just parsed, in which case this node doesn't need
to be parsed either.
Also, the name `has_regions` is confusing; it seems to simply
mean the opposite of "root" or "full_document". However, this PR does
not touch it.
This is a step in an ongoing refactor where the "grid_puts" and
"grid_put_linebuf" code paths will share more of the implementation (in
particular for delta calculation, doublewidth and 'arabicshape'
handling). But it also makes sense by its own as a cleanup, and is thus
committed separately.
Before this change many of the low level grid functions grid_puts,
grid_fill etc could both be used in a standalone fashion but also as
part of a batched line update which would be finally transmitted as a
single grid_line call (via ui_line() ). This was initially useful to
quickly refactor pre-existing vim code to use batched logic safely.
However, this pattern is not really helpful for maintainable and newly
written code, where the "grid" and "row" arguments are just needlessly
repeated. This simplifies these calls to just use grid and row as
specified in the initial grid_line_start(grid, row) call.
This also makes the intent clear whether any grid_puts() call is actually
part of a batch or not, which is better in the long run when more things
get refactored to use effective (properly batched) updates.
- Remove the usage of the term "defer" to avoid confusion with
`vim.defer_fn`, which also calls `vim.schedule_wrap` internally.
- Explicitly state that `vim.schedule_wrap` returns a function in the
text.
- Mention that arguments are passed along.
- Include a usage example.
- Rename param to `fn`.
Fixes#24339
rust-analyzer sends "Invalid offset" error in such cases. Some other
servers handle it specially.
LSP spec mentions that "A range is comparable to a selection in an
editor". Most editors don't handle trailing newlines the same way
Neovim/Vim does, it's clearly visible if it's present or not. With that
in mind it's understandable why sending end position as simply the start
of the line after the last one is considered invalid in such cases.
If nvim exited with nonzero status this is for one of the two reasons
- `:cquit` was invoked. This is used by users and plugins to communicate
a result, like a nonzero status will fail a `git commit` operation
- There was an internal error or deadly signal. in this case an error
message was likely written to stderr or to the screen.
In the latter case, the error message was often hidden by the TUI
exiting altscreen mode, which erases all visible terminal text.
This change prevents this in the latter case, while still cleaning up
the terminal properly when `:cquit` was deliberatily invoked.
Other cleanup like exiting mouse mode and raw mode is still done.
Problem: Wrong curswant when clicking on empty line or with vsplits.
Solution: Don't check for ScreenCols[] before the start of the window
and handle empty line properly.
closes: vim/vim#1313203cd697d63
patch 9.0.1918: No filetype detection for Authzed filetypes
Problem: No filetype detection for Authzed filetypes
Solution: Detect the *.zed file extension as authzed filetype
closes: vim/vim#131295790a54166
Co-authored-by: Matt Polzin <mpolzin@workwithopal.com>
Memoizes a function, using a custom function to hash the arguments.
Private for now until:
- There are other places in the codebase that could benefit from this
(e.g. LSP), but might require other changes to accommodate.
- Invalidation of the cache needs to be controllable. Using weak tables
is an acceptable invalidation policy, but it shouldn't be the only
one.
- I don't think the story around `hash_fn` is completely thought out. We
may be able to have a good default hash_fn by hashing each argument,
so basically a better 'concat'.
This is not used as part of the logic to actually implement TUI line wrapping
In vim (especially gvim) it is used to emulate terminal-style text
selection. But in nvim we don't do that, and have no plans to reintroduce it.
Problem: r_CTRL-C works differently in visual mode
Solution: Make r_CTRL-C behave consistent in visual mode
in terminal and Windows GUI
in visual mode, r CTRL-C behaves strange in Unix like environments. It
seems to end visual mode, but still is waiting for few more chars,
however it never seems to replace it by any characters and eventually
just returns back into normal mode.
In contrast in Windows GUI mode, r_CTRL-C replaces in the selected area
all characters by a literal CTRL-C.
Not sure why it behaves like this. It seems in the Windows GUI, got_int
is not set and therefore behaves as if any other normal character has
been pressed.
So remove the special casing of what happens when got_int is set and
make it always behave like in Windows GUI mode. Add a test to verify it
always behaves like replacing in the selected area each selected
character by a literal CTRL-C.
closes: vim/vim#13091closes: vim/vim#13112476733f3d0
Co-authored-by: Christian Brabandt <cb@256bit.org>
Previously, a screen cell would occupy 28+4=32 bytes per cell
as we always made space for up to MAX_MCO+1 codepoints in a cell.
As an example, even a pretty modest 50*80 screen would consume
50*80*2*32 = 256000, i e a quarter megabyte
With the factor of two due to the TUI side buffer, and even more when
using msg_grid and/or ext_multigrid.
This instead stores a 4-byte union of either:
- a valid UTF-8 sequence up to 4 bytes
- an escape char which is invalid UTF-8 (0xFF) plus a 24-bit index to a
glyph cache
This avoids allocating space for huge composed glyphs _upfront_, while
still keeping rendering such glyphs reasonably fast (1 hash table lookup
+ one plain index lookup). If the same large glyphs are using repeatedly
on the screen, this is still a net reduction of memory/cache
consumption. The only case which really gets worse is if you blast
the screen full with crazy emojis and zalgo text and even this case
only leads to 4 extra bytes per char.
When only <= 4-byte glyphs are used, plus the 4-byte attribute code,
i e 8 bytes in total there is a factor of four reduction of memory use.
Memory which will be quite hot in cache as the screen buffer is scanned
over in win_line() buffer text drawing
A slight complication is that the representation depends on host byte
order. I've tested this manually by compling and running this
in qemu-s390x and it works fine. We might add a qemu based solution
to CI at some point.
Problem: undefined behaviour upper/lower function ptrs
Solution: Fix UBSAN error in regexp and simplify upper/lowercase
modifier code
The implementation of \u / \U / \l / \L modifiers in the substitute
command relies on remembering the state by setting function pointers on
func_all/func_one in the code. The code signature of `fptr_T` is
supposed to return void* (due to C function signatures not being able to
return itself due to type recursion), and the definition of the
functions (e.g. to_Upper) didn't follow this rule, and so the code tries
to cast functions of different signatures, resulting in undefined
behavior error under UBSAN in Clang 17. See vim/vim#12745.
We could just fix `do_Upper`/etc to just return void*, which would fix
the problem. However, these functions actually do not need to return
anything at all. It used to be the case that there was only one pointer
"func" to store the pointer, which is why the function needs to either
return itself or NULL to indicate whether it's a one time or ongoing
modification. However, c2c355df6f094cdb9e599fd395a78c14486ec697
(7.3.873) already made that obsolete by introducing `func_one` and
`func_all` to store one-time and ongoing operations separately, so these
functions don't actually need to return anything anymore because it's
implicit whether it's a one-time or ongoing operation. Simplify the code
to reflect that.
closes: vim/vim#13117d25021cf03
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
runtime(netrw): fix filetype detection for remote editing files
closes: vim/vim#12990closes: vim/vim#12992
this partially reverses commit 71badf9 by commenting out the line that
intentionally sets the filetype to an empty string.
d8b86c937a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
With incremental injection parsing, injected languages' parsers parse
only the relevant regions and stores the result in _trees with the index
of the corresponding region. Therefore, there can be holes in _trees.
Solution:
* Use generic table functions where appropriate.
* Fix type annotations and docs.
Problem: Cannot use an import in 'foldexpr'.
Solution: Set the script context to where 'foldexpr' was set. (closesvim/vim#9584)
Fix that the script context was not set for all buffers.
e70dd11ef4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: ":put =expr" does not handle a list properly.
Solution: Use the same logic as eval_to_string_eap(). (closesvim/vim#7684)
883cf97f10
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem:
It doesn't make much sense to flatten each region (= list of ranges).
This coincidentally worked for region with a single range.
Solution:
Custom function for combining regions.
Problem
---
If a highlighter query returns a significant number of predicate
non-matches, the highlighter will scan well past the end of the window.
Solution
---
In the iterator returned from `iter_captures`, accept an optional
parameter `end_line`. If no parameter provided, the behavior is
unchanged, hence this is a non-invasive tweak.
Fixes: #25113nvim-treesitter/nvim-treesitter#5057
`marktree_move` is making the tree out of order at:
be10d65bfa/src/nvim/marktree.c (L1188)
Because `key` is at the new position, and `x->key[new_i]` is also at the
new position, this comparison spuriously returns true, which causes
`x->key[i]` to be updated in-place even when it needs to be moved.
This causes crashes down the line, since the ordering of `MTNode.key` is
an invariant that must be preserved.
Fixes: #25157
If you would insert element X at position j, then if you are moving that
same element X from position i < j, you should move it to position j -
1, because you are losing an element.
This error caused a gap to be left in the array, so that it looked like
[x, null, y] instead of [x, y], where len = 2. This triggered #25147.
Fixes: #25147
When tabstop and shiftwidth are not equal, tabs are inserted as individual
spaces and then rewritten as tab characters in a second pass. That second pass
did not call changed_bytes which resulted in events being omitted.
Fixes#25092
The name for_each_child is misleading and caused bugs.
After #25111, #25115, there are no more usages of `for_each_child` in Nvim.
In the future if we want to restore this functionality we can consider a
generalized vim.traverse(node, key, visitor) function.
add_glob_target is our custom method to figure out whether a work needs
to be done or not. This works as expected most of the time, but causes a
problem with stylua.
Stylua makes the decision that if a file is explicitly passed to be
formatted, then it will format the file even if the file is set to be
ignored in .styluaignore. This behavior breaks add_glob_target with
seemingly no easy workaround.
More information: https://github.com/JohnnyMorganz/StyLua/issues/751
Instead, what we can do is call stylua as you would in the command line.
This will make stylua work as expected. The downside is that we no
longer get a free "is this work necessary" detection, meaning that
stylua will be run each time `make lint` is called, regardless if it's
necessary or not. For longer lint tasks such as uncrustify and
clang-tidy this would be disastrous, but this is an acceptable tradeoff
since stylua is very quick.
Problem:
Folds are opened when the visible range changes even if there are no
modifications to the buffer, e.g, when using zM for the first time. If
the parsed tree was invalid, on_win re-parses and gets empty tree
changes, which triggers fold updates.
Solution:
Don't update folds in on_changedtree if there are no changes.
The removes the previous restriction that nvim_buf_set_extmark()
could not be used to highlight arbitrary multi-line regions
The problem can be summarized as follows: let's assume an extmark with a
hl_group is placed covering the region (5,0) to (50,0) Now, consider
what happens if nvim needs to redraw a window covering the lines 20-30.
It needs to be able to ask the marktree what extmarks cover this region,
even if they don't begin or end here.
Therefore the marktree needs to be augmented with the information covers
a point, not just what marks begin or end there. To do this, we augment
each node with a field "intersect" which is a set the ids of the
marks which overlap this node, but only if it is not part of the set of
any parent. This ensures the number of nodes that need to be explicitly
marked grows only logarithmically with the total number of explicitly
nodes (and thus the number of of overlapping marks).
Thus we can quickly iterate all marks which overlaps any query position
by looking up what leaf node contains that position. Then we only need
to consider all "start" marks within that leaf node, and the "intersect"
set of that node and all its parents.
Now, and the major source of complexity is that the tree restructuring
operations (to ensure that each node has T-1 <= size <= 2*T-1) also need
to update these sets. If a full inner node is split in two, one of the
new parents might start to completely overlap some ranges and its ids
will need to be moved from its children's sets to its own set.
Similarly, if two undersized nodes gets joined into one, it might no
longer completely overlap some ranges, and now the children which do
needs to have the have the ids in its set instead. And then there are
the pivots! Yes the pivot operations when a child gets moved from one
parent to another.
`LanguageTree:parse` is recursive, and calls
`LanguageTree:for_each_child`, which is also recursive.
That means that, starting from the third level (child of child of root),
nodes will be parsed twice.
Which then means that if the tree is N layers deep, there will be ~2^N
parses even if the branching factor is 1.
Now, why was the tree deepening with each character inserted? And why
did this only regress in #24647? These are mysteries for another time.
Fixes: #25104
Problem:
* The guessed botline might be smaller than the actual botline e.g. when
there are folds and the user is typing in insert mode. This may result
in incorrect treesitter highlights for injections.
* botline can be larger than the last line number of the buffer, which
results in errors when placing extmarks.
Solution:
* Take a more conservative approximation. I am not sure if it is
sufficient to guarantee correctness, but it seems to be good enough
for the case mentioned above.
* Clamp it to the last line number.
Co-authored-by: Lewis Russell <me@lewisr.dev>
Problem:
Some tests fail with $SHELL=fish #6172
Related: https://github.com/neovim/neovim/pull/6176
Solution:
Replace "echo -n" with "printf", because "echo" in sh may be provided
as a shell builtin, which does not accept an "-n" flag to avoid a
trailing newline (e.g. on macos). "printf" is more portable (defined by
POSIX) and it does not output a trailing newline by itself.
Fixes#6172
TODO:
Other test failures may be related to "session leader" issue: https://github.com/neovim/neovim/issues/2354
Checked by running `:terminal ./build/bin/tty-test` from Nvim with
`shell=/bin/fish` (inherited from `$SHELL`) and it indeed complains
about "process does not own the terminal". With `shell=sh` it doesn't complain. And
unsetting `$SHELL` seems to make `nvim` to fall back to `shell=sh`.
FAILED test/functional/terminal/tui_spec.lua @ 1017: TUI paste: terminal mode
test/functional/terminal/tui_spec.lua:1024: Row 1 did not match.
Expected:
|*tty ready |
|*{1: } |
|* |
| |
|{5:^^^^^^^ }|
|{3:-- TERMINAL --} |
|{3:-- TERMINAL --} |
Actual:
|*process does not own the terminal |
|* |
|*[Process exited 2]{1: } |
| |
|{5:^^^^^^^ }|
|{3:-- TERMINAL --} |
|{3:-- TERMINAL --} |
To print the expect() call that would assert the current screen state, use
screen:snapshot_util(). In case of non-deterministic failures, use
screen:redraw_debug() to show all intermediate screen states.
stack traceback:
test/functional/ui/screen.lua:622: in function '_wait'
test/functional/ui/screen.lua:352: in function 'expect'
test/functional/terminal/tui_spec.lua:1024: in function <test/functional/terminal/tui_spec.lua:1017>
FAILED test/functional/terminal/tui_spec.lua @ 1551: TUI forwards :term palette colors with termguicolors
test/functional/terminal/tui_spec.lua:1567: Row 1 did not match.
Expected:
|*{1:t}ty ready |
| |
|* |
| |
|{2:^^^^^^^ }|
| |
|{3:-- TERMINAL --} |
Actual:
|*{1:p}rocess does not own the terminal |
| |
|*[Process exited 2] |
| |
|{2:^^^^^^^ }|
| |
|{3:-- TERMINAL --} |
To print the expect() call that would assert the current screen state, use
screen:snapshot_util(). In case of non-deterministic failures, use
screen:redraw_debug() to show all intermediate screen states.
stack traceback:
test/functional/ui/screen.lua:622: in function '_wait'
test/functional/ui/screen.lua:352: in function 'expect'
test/functional/terminal/tui_spec.lua:1567: in function <test/functional/terminal/tui_spec.lua:1551>
runtime(scala): Fix Scala highlighting string literal as type param (vim/vim#13070)
Since https://docs.scala-lang.org/sips/42.type.html which is implemented
in Scala 2.13 and in Scala 3 it possible to use string literals as
singleton types. So code like
```
someFunc["abc"]
```
is valid. Currently this code is not hightlighted correctly and worse if
there is an unclosed `(` in the string it breaks the formating in the
rest of the file.
I also submitted this patch to the mentioned project for this runtime
file: https://github.com/derekwyatt/vim-scala/pull/173 But there are no
commits there over the last 2 years and no response in the week since I
created it. Also the last change to the Scala syntax file:
https://github.com/vim/vim/pull/9594 is yet to be backported to that
repo. Therefore I am opening this PR as well to get some feedback on how
to proceed to get this fixed.
0661033075
Co-authored-by: Emil Ejbyfeldt <eejbyfeldt@liveintent.com>
Memfile used a private implementation of an open hash table with intrusive collision chains, but there is
no reason to assume the standard khash_t based Map won't work just fine.
Yes, we are taking full ownership and maintenance over memline and memfile.
No one is going to maintain it for us.
Trust the plan.
Fixes#24881
--force-config passed to luarocks' configure script is only taken into
account in case "make install" is used afterwards.
But if "make bootstrap" is used then this flag has no effect. And it can
actually copy an existing config on the system to the new installation.
That existing config can have a different version of Lua set by default.
In which case luarocks will install packages for that version instead of
the one used in tests. And trying to run tests then will fail because of
missing packages.
This reverts commit e71c7898ca.
Triggering jobs on users own fork turned out to be not that useful, and
only necessary in rare moments. It's easier to adjust the CI scripts if
the users wants CI results before creating a pull request. It also
reduces the complexity of the CI code.
Problem: missing test for patch 9.0.1873
Solution: add a test trying to exchange windows
Add a test, making sure that switching windows is not allowed when
textlock is active, e.g. when running `:s/<pat>/\=func()/`
18d2709aa1
Co-authored-by: Christian Brabandt <cb@256bit.org>
This will fix the failing release job.
Ubuntu 18.04 is incompatible with checkout action version 4, which
requires glibc 2.28+. This will bump the minimum glibc version required
to use the release versions to 2.31. People requring the older releases
can find them at https://github.com/neovim/neovim-releases.
runtime(tohtml): Update TOhtml to version 9.0v2 (vim/vim#13050)
Modified behavior:
- Change default value of g:html_use_input_for_pc from "fallback" to
"none". This means with default settings, only the standards-based
method to make special text unselectable is used. The old method
relying on unspecified browser behavior for <input> tags is now only
used if a user specifically enables it.
- Officially deprecate g:use_xhtml option (in favor of
g:html_use_xhtml) by issuing a warning message when used.
Bugfixes:
- Fix issue vim/vim#8547: LineNr and other special highlight groups did not
get proper style rules defined when using "hi link".
- Fix that diff filler was not properly added for deleted lines at the
end of a buffer.
Other:
- Refactored function definitions from long lists of strings to use
:let-heredoc variable assignment instead.
- Corrected deprecated "." string concatenation operator to ".."
operator in more places.
86cfb39030
Co-authored-by: fritzophrenic <fritzophrenic@gmail.com>
Problem: Wrong order of arguments for error messages
Solution: Reverse order or arguments for e_aptypes_is_null_nr_str
closes: vim/vim#130511bd2cb1169
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
- Add runtime/lua/vim/vimhelp.lua, which is a translation of Vim's
runtime/import/dist/vimhelp.vim.
- Unlike Vim, run the highlighting from an ftplugin file instead of a
syntax file, so that it is run even if using treesitter.
This involves two redesigns of the map.c implementations:
1. Change of macro style and code organization
The old khash.h and map.c implementation used huge #define blocks with a
lot of backslash line continuations.
This instead uses the "implementation file" .c.h pattern. Such a file is
meant to be included multiple times, with different macros set prior to
inclusion as parameters. we already use this pattern e.g. for
eval/typval_encode.c.h to implement different typval encoders reusing a
similar structure.
We can structure this code into two parts. one that only depends on key
type and is enough to implement sets, and one which depends on both key
and value to implement maps (as a wrapper around sets, with an added
value[] array)
2. Separate the main hash buckets from the key / value arrays
Change the hack buckets to only contain an index into separate key /
value arrays
This is a common pattern in modern, state of the art hashmap
implementations. Even though this leads to one more allocated array, it
is this often is a net reduction of memory consumption. Consider
key+value consuming at least 12 bytes per pair. On average, we will have
twice as many buckets per item.
Thus old implementation:
2*12 = 24 bytes per item
New implementation
1*12 + 2*4 = 20 bytes per item
And the difference gets bigger with larger items.
One might think we have pulled a fast one here, as wouldn't the average size of
the new key/value arrays be 1.5 slots per items due to amortized grows?
But remember, these arrays are fully dense, and thus the accessed memory,
measured in _cache lines_, the unit which actually matters, will be the
fully used memory but just rounded up to the nearest cache line
boundary.
This has some other interesting properties, such as an insert-only
set/map will be fully ordered by insert only. Preserving this ordering
in face of deletions is more tricky tho. As we currently don't use
ordered maps, the "delete" operation maintains compactness of the item
arrays in the simplest way by breaking the ordering. It would be
possible to implement an order-preserving delete although at some cost,
like allowing the items array to become non-dense until the next rehash.
Finally, in face of these two major changes, all code used in khash.h
has been integrated into map.c and friends. Given the heavy edits it
makes no sense to "layer" the code into a vendored and a wrapper part.
Rather, the layered cake follows the specialization depth: code shared
for all maps, code specialized to a key type (and its equivalence
relation), and finally code specialized to value+key type.
runtime: don't execute external commands when loading ftplugins
This is a followup to 816fbcc262687b81fc46f82f7bbeb1453addfe0c (patch
9.0.1833: [security] runtime file fixes)
It basically disables that external commands are run on loading of the
filetype plugin, **unless** the user has set the `g:plugin_exec = 1`
global variable in their configuration or for a specific filetype the
variable g:<filetype>_exec=1.
There are a few more plugins, that may execute system commands like
debchangelog, gitcommit, sh, racket, zsh, ps1 but those do at least
do not run those commands by default during loading of the filetype plugin
(there the command is mostly run as convenience for auto-completion or
to provide documentation lookup).
closes: vim/vim#13034f7ac0ef509
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Tim Pope <vim@tpope.org>
runtime(ftplugin): allow to exec if curdir is in PATH
In case the current directory is present as valid $PATH entry, it is OK
to call the program from it, even if vim curdir is in that same
directory.
(Without that patch, for instance, you will not be able to open .zip
files while your current directory is /bin)
closes: vim/vim#1302767c951df4c
Co-authored-by: Anton Sharonov <anton.sharonov@gmail.com>
Problem: CI may fail in test_recover_empty_swap
Solution: Set directory option
Fix failing Test_recover_empty_swap test
:recover by default not only looks in the current directory, but also in
~/tmp for files to recover. If it finds some files to recover, it will
interactively prompt for a file to recover. However, prompting doesn't
work when running the test suite (and even if it would, there is no one
that can answer the prompt).
So it doesn't really make sense during testing, to inspect different
directories for swap files and prompt and wait (which will lead to a
timeout and therefore a failing test).
So set the 'directory' option temporarily to the current directory only
and reset it back once the test finishes.
closes: vim/vim#130381c7397f3f1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Too many delete() calls in tests.
Solution: Use deferred delete where possible.
db77cb3c08
Include test_recover.vim changes only.
Cherry-pick test_recover.vim change from patch 8.2.3637.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
runtime(php): Update the php indent script to the 1.75 (from 1.70) (vim/vim#13025)
Changes:
1.75:
- Fix 2072/PHP-Indenting-for-VImvim/vim#87: The indent optimization was causing wrong indentation of lines
preceded by a line ending with '}' when preceded by non white characters.
- Fix long standing non-reported regex escaping issue in cleaning end of line
comments function. This should help fixing some other unreported issues when
parts of codes are commented out at ends of lines...
1.74:
- Fix 2072/PHP-Indenting-for-VImvim/vim#86: Add support for `match` expression.
1.73:
- Fix 2072/PHP-Indenting-for-VImvim/vim#77 where multi line strings and true/false keywords at beginning of a
line would cause indentation failures.
1.72:
- Fix vim/vimvim/vim#5722 where it was reported that the option PHP_BracesAtCodeLevel
had not been working for the last 6 years.
1.71:
- Fix 2072/PHP-Indenting-for-VImvim/vim#75 where the indent script would hang on some multi-line quoted strings.
3170342af3
Co-authored-by: John Wellesz <john.wellesz@gmail.com>
vim-patch:9.0.1866: undo is synced after character find
Problem: Undo is synced after character find.
Solution: Set no_u_sync when calling gotchars_nop().
closes: vim/vim#13022closes: vim/vim#13024dccc29c228
- simplify lua interpreter search
- fix incorrect variable name in BuildLua.cmake
- build PUC Lua with -O2
- silence non-mandatory find_package search for libuv
- simplify Find modules
- Prefer using the explicitly set CI_BUILD over relying on the
environment variable "CI".
This partially reverts commit 7d0479c558.
The job has been particularly unstable when used with docker on
cirrus-ci, which is especially bad as it's meant to be a non-flaky and
simple test.
Problem: buffer-overflow in vim_regsub_both()
Solution: Check remaining space
ced2c7394a
The change to do_sub() looks confusing. Maybe it's an overflow check?
Then the crash may not be applicable to Nvim because of different casts.
The test also looks confusing. It seems to source itself recursively.
Also don't call strlen() twice on evaluation result.
N/A patches for version.c:
vim-patch:9.0.1849: CI error on different signedness in ex_cmds.c
vim-patch:9.0.1853: CI error on different signedness in regexp.c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: use-after-free in do_ecmd
Solution: Verify oldwin pointer after reset_VIsual()
e1dc9a6275
N/A patches for version.c:
vim-patch:9.0.1841: style: trailing whitespace in ex_cmds.c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: potential oob write in do_addsub()
Solution: don't overflow buf2, check size in for loop()
889f6af371
Co-authored-by: Christian Brabandt <cb@256bit.org>
Downloading the necessary files all at once instead of doing dependency
handling with luarocks speeds up installation immensely. We speed up the
process even more by using luv as a replacement for the C modules in the
busted dependencies, which allows us to skip costly compilation times.
Co-authored-by: bfredl <bjorn.linse@gmail.com>
runtime(ruby): Update syntax, indent and ftplugin files
While making changes to the ruby ftplugin, slightly change the exepath()
conditional from patch 9.0.1833 and move it after the :cd invocation.
closes: 12981
closes: 12994
da16a1b471
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Co-authored-by: Tim Pope <code@tpope.net>
Problem: runtime files may execute code in current dir
Solution: only execute, if not run from current directory
The perl, zig and ruby filetype plugins and the zip and gzip autoload
plugins may try to load malicious executable files from the current
working directory. This is especially a problem on windows, where the
current directory is implicitly in your $PATH and windows may even run a
file with the extension `.bat` because of $PATHEXT.
So make sure that we are not trying to execute a file from the current
directory. If this would be the case, error out (for the zip and gzip)
plugins or silently do not run those commands (for the ftplugins).
This assumes, that only the current working directory is bad. For all
other directories, it is assumed that those directories were
intentionally set to the $PATH by the user.
816fbcc262
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong cursor position with virtual text before double-width
char at window edge.
Solution: Check for double-width char before adding virtual text size.
closes: vim/vim#12977ac2d8815ae
set_option_value() only called did_set_option() for string options,
whereas do_set_option_value() called it for all types.
This change makes set_option_value() call did_set_option() for all types
and thus makes it more consistent with do_set_option_value().
The class `lsp.Client` has a public member `server_capabilities`,
which is assumed to be non-nil once initialized, as documented in
`:help vim.lsp.client`. Due to the possibility that it may be nil
before initialization, `lsp.Client` was not having a proper lua type
annotations on the field `server_capabilities`.
Instead of having a nil `server_capabilities` until initialized in
the RPC response callback, we can have an initial value of empty table.
This CHANGES the behavior of the `server_capabilities` field in a way
that it is no longer `nil` until initialization. Note that, as
already documented, `server_capabilities` should never be nil when
it is once initialized and thus ready to be used in user configs.
This fixes the issue where the LspNotify handlers for inlay_hint /
diagnostics would end up refreshing all attached clients.
The handler would call util._refresh, which called
vim.lsp.buf_request, which calls the method on all attached clients.
Now util._refresh takes an optional client_id parameter, which is used
to specify a specific client to update.
This commit also fixes util._refresh's handling of the `only_visible`
flag. Previously if `only_visible` was false, two requests would be made
to the server: one for the visible region, and one for the entire file.
Co-authored-by: Stanislav Asunkin <1353637+stasjok@users.noreply.github.com>
Co-authored-by: Mathias Fußenegger <mfussenegger@users.noreply.github.com>
Problem: When double clicking a line starting with a #, the code assumes
there is a fold there and tries to close it, resulting in an error if
there isn't a fold.
Solution: Check foldlevel before performing "zc".
Problem: Wrong cursor position with virtual text before a whitespace
character and 'linebreak'.
Solution: Always set "col_adj" to "size - 1" and apply 'linebreak' after
adding the size of 'breakindent' and 'showbreak'.
closes: vim/vim#129566e55e85f92
N/A patches:
vim-patch:9.0.1826: keytrans() doesn't translate recorded key typed in a GUI
Problem: Rexx files may not be recognised
Solution: Add shebang detection and improve disambiguation of *.cls
files
closes: vim/vim#12951e06afb7860
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Unfortunately the gc=false objects can refer to a dangling tree if the
gc=true tree was freed first. This reuses the same tree object as the
node itself is keeping alive via the uservalue of the node userdata.
(wrapped in a table due to lua 5.1 restrictions)
Problem: `push_tree`, every time its called for the same TSTree with
`do_copy=false` argument, creates a new userdata for it. Each userdata,
when garbage collected, frees the same TSTree C object.
Solution: Add flag to userdata, which indicates, should C object,
which userdata points to, be freed, when userdata is garbage collected.
Problem:
With treesitter fold, InsertLeave can be slow, because a single session
of insert mode may schedule multiple fold updates in on_bytes and
on_changedtree.
Solution:
Don't create duplicate autocmds.
Some more reasonable defaults for topline:
- if topline was replaced with another line, that now becomes topline
- if line was inserted just before topline, display it. This is more
similar to the previous API behavior.
Problem: 'linebreak' is incorrectly drawn after 'breakindent'.
Solution: Don't include 'breakindent' size when already after it.
closes: vim/vim#12937closes: vim/vim#129401d3e0e8f31
Problem: camel-case spelling has issues with digits
Solution: Improve the camCase spell checking by taking digits
and caps into account
Rewrite the conditions to check for word boundaries by taking into
account the presence of digits and all-caps sequences such as acronyms.
closes: vim/vim#12644closes: vim/vim#12933d08745040b
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Multiline regex with Visual selection fails when Visual
selection contains virtual text after last char.
Solution: Only include virtual text after last char when getting full
line length.
closes: vim/vim#12908e3daa06be1
Problem: Cursor position still wrong with 'showbreak' and virtual text
after last character or 'listchars' "eol".
Solution: Remove unnecessary w_wcol adjustment in curs_columns(). Also
fix first char of virtual text not shown at the start of a screen
line.
closes: vim/vim#12478closes: vim/vim#12532closes: vim/vim#129046a3897232a
Problem:
'endofline' can be used to detect if a file ends of <EOL>, however
editorconfig can break this.
Solution:
Set 'endofline' during BufWritePre
Fixes: #24869
Problem: Normal mode "gM", "gj", "gk" commands behave incorrectly with
virtual text.
Solution: Use linetabsize() instead of linetabsize_str().
closes: vim/vim#12909d809c0a903
The change in #248240081549 was not a regression, however it was an
incomplete change. Unfortunately some common plugins come to depend on
this exising self-inconsistent behavior. These plugins are going to need
to update for 0.10
nvim_buf_set_lines used to NOT adjust the topline correctly if a buffer
was displayed in just one window. However, if displayed in multiple
windows, it was correctly adjusted for any window not deemed the
current window for the buffer (which could be an arbitrary choice if the
buffer was not already current, as noted in the last rafactor)
This fixes so that all windows have their topline adjusted. The added
tests show this behavior, which should be the reasonable one.
Problem: Now way to show text at the bottom part of floating window
border (a.k.a. "footer").
Solution: Allows `footer` and `footer_pos` config fields similar to
`title` and `title_pos`.
Added to support MessagePack-RPC fully compliant clients that do
not return responses in request order.
Although it is currently not an efficient implementation for full
compliance and full compliance cannot be guaranteed, the addition
of the new client type `msgpack-rpc` creates a situation where "if
the client type is `msgpack-rpc`, then backward compatibility is
ignored and full compliance with MessagePack- RPC compliance is
justified even if backward compatibility is ignored if the client
type is `msgpack-rpc`.
Most of the messy things when changing a non-current buffer is
not about the buffer, it is about windows. In particular, it is about
`curwin`.
When editing a non-current buffer which is displayed in some other
window in the current tabpage, one such window will be "borrowed" as the
curwin. But this means if two or more non-current windows displayed the buffers,
one of them will be treated differenty. this is not desirable.
In particular, with nvim_buf_set_text, cursor _column_ position was only
corrected for one single window. Two new tests are added: the test
with just one non-current window passes, but the one with two didn't.
Two corresponding such tests were also added for nvim_buf_set_lines.
This already worked correctly on master, but make sure this is
well-tested for future refactors.
Also, nvim_create_buf no longer invokes autocmds just because you happened
to use `scratch=true`. No option value was changed, therefore OptionSet
must not be fired.
Problem: Functions for virtcol and chartabsize are similar (both compute
horizontal size), but appear in two different source files.
Solution: Move virtcol functions to plines.c.
Problem: It may be unclear what "below" in first comment refers to.
Solution: Move vertical size functions to the bottom so that it can be
changed to "above".
runtime(termdebug): more termdebug fixes and improvements (vim/vim#12892)
- Fix and attempt to simplify :Frame/:Up/:Down documentation.
- Accept a count instead for :Up/:Down/+/-.
- Update the "Last Change" dates.
- Fix a missing :let (caused an error if gdb fails to start).
- Wipe the prompt buffer when ending prompt mode (if it exists and wasn't wiped
by the user first). Avoids issues with stale prompt buffers (such as E95 when
starting a new prompt mode session).
- Kill the gdb job if the prompt buffer is unloaded (similar to what's done for
a terminal buffer). Fixes not being able to start a new termdebug session if
the buffer was wiped by the user, for example.
3d3a9152fa
runtime(termdebug): add frame related commands (vim/vim#12511)
implementing `:Frame`, `:Up` and `:Down'
2ae7ffe0bc
Use maparg() for saving K as it's since been ported (and supports Lua callbacks
and the other API fields).
Use the 3 argument variant of mapset(), as the single argument one isn't ported
yet (v8.2.4861).
Co-authored-by: Simon Sobisch <simonsobisch@web.de>
Unlike Vim's job_stop(), Nvim's jobstop() does not take a signal argument, and
always sends SIGTERM/KILL.
:Stop and Ctrl-C in prompt mode is supposed to interrupt the program like in
terminal mode, not kill GDB.
Also, maybe libuv's kill() works on Windows? If so, the logic above could be
removed, but I don't have a Windows machine available to test that.
Also "set nomodified" when ending prompt mode, like Vim (avoids E37).
runtime(termdebug): Fix various Termdebug issues (vim/vim#12875)
* Fix some Termdebug issues after vim/vim#12403
* Fix :Asm in Termdebug prompt mode
* Fix Termdebug s:DecodeMessage escaping logic
a76f3221cd
Adjust disassembly message forwarding for Nvim, as its callback can receive
many lines at once.
Currently, just forward each disassembly line individually to s:CommOutput();
it's possible to do this in batch instead, but this is simpler.
I suggested moving to a GDB MI-based approach for the disassemble stuff
upstream, which should simplify the logic a lot if implemented (and possibly
allow for getting rid of the `&"disassemble ...` special-casing).
Also, correct "(gdb)" to include a trailing space; the stray GDB prompts were
being ignored by s:CommOutput() anyway, so this had caused no ill effects.
Vim splits lines on "\r", then trims any prefixed "\n".
But in Nvim, job output lines are split on "\n" (like readfile() in binary
mode), so trim any suffixed "\r" instead.
This gets rid of the trailing "^M" character in messages parsed from the jobs.
Runtime(termdebug): Add support to view local and argument variables
closes: 12403
9f29621415
Rename the existing "s:running" (#16790) to "s:gdb_running" to not clash with
the "s:running" introduced in this patch (which instead relates to whether the
debugged program is currently running in gdb).
Keep the file `:retab`bed as before.
Co-authored-by: laburnumT <flo.striker@gmail.com>
ml_get_buf() takes a third parameters to indicate whether the
caller wants to mutate the memline data in place. However
the vast majority of the call sites is using this function
just to specify a buffer but without any mutation. This makes
it harder to grep for the places which actually perform mutation.
Solution: Remove the bool param from ml_get_buf(). it now works
like ml_get() except for a non-current buffer. Add a new
ml_get_buf_mut() function for the mutating use-case, which can
be grepped along with the other ml_replace() etc functions which
can modify the memline.
The on_detect functions returned by filetype.lua set buffer local
variables which are often used by filetype plugins. For example, the
on_detect function for shell buffers sets variables such as b:is_bash or
b:is_sh, which are used by the sh ftplugin.
When called after setting the buffer's filetype, these variables cannot
be used by the ftplugin (because they are not yet defined). Instead,
call on_detect before setting the buffer filetype so that any buffer
variables set by on_detect can be used in the ftplugin.
runtime(menu): define shortcut for File->Open Tab (vim/vim#12895)
Seems missing as noted by Antonio Giovanni Colombo. So add it and use
the 'T' as shortcut, which does not seem to be used in the File dialog.
Verified on Windows.
e059fae100
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Antonio Giovanni Colombo <azc100@gmail.com>
runtime(bindzone): updated syntax file
- Add support for APL type in runtime/syntax/bindzone.vim
- all values between 0- 4294967295 are valid serials
closes: vim/vim#9743closes: vim/vim#83826e93689bde
vim-patch:544b209a2d4b
runtime(scala): Link Scala highlighting groups using 'hi def link' in syntax script (vim/vim#9594)
They were linked using 'hi link' which made it impossible for color
schemes to override highlight groups.
544b209a2d
Co-authored-by: Oskar Stenman <oskar@cetex.se>
Co-authored-by: Job Noorman <job@noorman.info>
Problem: wrong cursor position with 'showbreak' and lcs-eol
Solution: Add size of 'showbreak' before when 'listchars' "eol" is used.
Also fix wrong cursor position with wrapping virtual text on
empty line and 'showbreak'.
closes: vim/vim#128911193951beb
runtime: Remove Brams name from a few more runtime files (vim/vim#12780)
syntax/model.vim: minor wording improvement
e8d6f03f6a
Use the updated "Last Change" date for all.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Adri Verhoef <a3@a3.xs4all.nl>
Problem: cannot distinguish Forth and Fortran *.f files
Solution: Add Filetype detection Code
Also add *.4th as a Forth filetype
closes: vim/vim#1225119a3bc3add
Don't remove filetype files from Vim patches:
- filetype.vim, script.vim, ft.vim usually contain useful changes
- script.vim and ft.vim don't even have their paths spelled correctly
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Problems when setting bin/paste option
Solution: When setting binary/paste, remember that this also affects
depending options, so that :verbose set returns the right
location.
Mention if depending options for 'binary' or 'paste' have been reset
indirectly. Add a test to verify it works.
Also noticed as small bug, that the global option value for expandtab
was not reset when paste option is set, so fix that while at it.
closes: vim/vim#12837closes: vim/vim#12879757593c07a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: sidescrolloff and scrolloff options work slightly
different than other global-local options
Solution: Make it behave consistent for all global-local options
It was noticed, that sidescrolloff and scrolloff options behave
differently in comparison to other global-local window options like
'listchars'
So make those two behave like other global-local options. Also add some
extra documentation for a few special local-window options.
Add a few tests to make sure all global-local window options behave
similar
closes: vim/vim#12956closes: vim/vim#126434a8eb6e7a9
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong display with wrapping virtual text or unprintable chars,
'showbreak' and 'smoothscroll'.
Solution: Don't skip cells taken by 'showbreak' in screen lines before
"w_skipcol". Combined "n_skip" and "skip_cells".
closes: vim/vim#12597b557f48982
Switch to a rolling release, so the `0-beta3` suffix is dropped in favor
of the date. Remove the custom UNIX command as the symlink is now
created by the LuaJIT Makefile.
Problem: Using freed memory when 'tagfunc' wipes out buffer that holds
'complete'.
Solution: Make a copy of the option. Make sure cursor position is valid.
0ff01835a4
Cherry-pick a cmdwin change from patch 9.0.0500.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: The cursor line number becomes negative when using :z^ in an empty
buffer. (neovim vim/vim#6557)
Solution: Correct the line number. Also reset the column.
a364cdb648
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Typos in tests; one lua line not covered by test.
Solution: Fix typos. Add test case. (Dominique Pellé, closesvim/vim#9994)
81b573d7e5
Cherry-pick test_menu.vim change from patch 9.0.1453.
N/A patch:
vim-patch:8.2.3045: minor typos
Co-authored-by: Dominique Pelle <dominique.pelle@gmail.com>
Problem: Autocmd test is a bit flaky on MS-Windows.
Solution: Add a bit more sleeping. (Ken Takata, closesvim/vim#11095)
ae04a6049b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: On MS-Windows some tests are flaky.
Solution: Add sleeps, disable swapfile, mark test as flaky. (Ken Takata,
closesvim/vim#11082)
0500e87eba
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: Using separate delete() call instead of writefile() 'D' flag.
Solution: Use the writefile 'D' flag.
3411265a36
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Deleting files in tests is a hassle.
Solution: Use the new 'D' flag of writefile().
e1f3ab73bc
vim-patch:e1f3ab73bc7c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
$COLORTERM is set in the terminal emulator based on the value of
'termguicolors' ("truecolor" if &tgc is set, 256 otherwise), but ONLY if
$COLORTERM is also set in the parent terminal emulator.
This is an unnecessary restriction that can cause issues in some cases.
For instance, $COLORTERM is stripped by default by OpenSSH, so is not
present in an SSH session. The terminal emulator still supports 24 bit
color, so the lack of $COLORTERM is not a reliable indicator. When an
application runs in Nvim's :terminal it thus has no way to know whether
or not true color is supported.
Instead, setting it unconditionally based on 'termguicolors' uses the
user's own preferences to infer if 24-bit color is supported, rather
than depending on the (unreliable) presence of $COLORTERM. If
'termguicolors' is set in a terminal that does not support true color
then the colors in Nvim will already look bad. Enabling them for
applications in the terminal emulator will not make it any worse.
If 'termguicolors' is not set then the value of $COLORTERM from the
parent terminal (if any) is forwarded to Nvim's :terminal.
Fixes: https://github.com/neovim/neovim/issues/24717
Problem: "for" and "while" not recognized after :vim9cmd and :legacy.
(Emanuele Torre)
Solution: Recognize all the command modifiers. (closesvim/vim#11087)
Add a test to check the list of modifiers.
9132426334
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Mouse scroll code is not optimal.
Solution: Properly organise Normal mode, Insert mode and common code.
(Christopher Plewright, closesvim/vim#11572)
ff95ce0930
Co-authored-by: Christopher Plewright <chris@createng.com>
Problem: Some mouse scroll code is not in a good place.
Solution: Refactor the code. (Christopher Plewright, closesvim/vim#11561)
696d0a8625
Co-authored-by: Christopher Plewright <chris@createng.com>
Problem: Horizontal mouse scroll only works in the GUI.
Solution: Make horizontal mouse scroll also work in a terminal.
(Christopher Plewright, closesvim/vim#11448)
44c2209352
Co-authored-by: Christopher Plewright <chris@createng.com>
runtime(dosini): save and restore cpo value in syntax script
Commit dd0ad2598898c2b4641c4acd5b70b6184fa698ed introduced
line-continuation. However, to make sure this does not cause an error
when Vim is run in compatible mode, we need to set compatibility mode
temporarily and reset it back when finished reading the file.
This fixes: https://groups.google.com/g/vim_use/c/9zccgo_RIqM/m/xlUmhBktBgAJ6909639249
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(haskell): Add single quote to `iskeyword` in ftplugin (vim/vim#8191)
The single quote `'` is a valid character in variable names, so it should be included in `iskeyword`; this, for instance, makes the <kbd>*</kbd> command behave predictably
5e6e4042b1
Co-authored-by: Enrico Maria De Angelis <enricomaria.dean6elis@gmail.com>
Runtime: Add nixInherit matcher in nix.vim syntax
Perform the lookahead in `nixInheritAttributeScope`, then hand over to a
new region called `nixInheritAttributeSubExpr`, which sets the match
start to one char after the opening bracket to avoid a double-match.
Finally, only do a lookahead to `)` in `nixInheritAttributeSubExpr` (and
thus make sure the region is closed to not get a match of `nixParen`
here) and let `nixInheritAttributeScope` close the bracket.
72904d5fda
Co-authored-by: James Fleming <james@electronic-quill.net>
Problem: Using common name in tests leads to flaky tests.
Solution: Rename files and directories to be more specific.
e7cda97b6b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: When switching window in autocmd the restored cursor position may
be wrong.
Solution: Do not restore the cursor if it was not set. (closesvim/vim#10775)
b03950fafa
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Window title test still fails in some configurations.
Solution: Explicitly set the 'title' option.
1450112eef
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Window title test fails in some configurations.
Solution: Only run the test if the title can be obtained.
a6c09a7c20
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Using setbufvar() may change the window title.
Solution: Do not redraw when creating the autocommand window. (closesvim/vim#9613)
dff97e65eb
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: CTRL-A does not work properly with the cmdline popup menu.
Solution: Fix issues with CTRL-A. Add more tests for the cmdline popup
menu. Remove TermWait() before VeriryScreenDump(). Refactor the
cmdline popup code. (Yegappan Lakshmanan, closesvim/vim#9735)
560dff49c0
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Test_xrestore sometimes fails.
Solution: Mark the test as flayky. Move marking test as flaky to the test
instead of listing them in runtest.
f08b0eb869
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for cmdline window and terminal fails on MS-Windows.
Solution: Skip the test on MS-Windows.
0b49648486
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when using a terminal popup window from the cmdline window.
Solution: Instead of checking cmdwin_type call cmdwin_is_active().
(closesvim/vim#8286)
e5b4486c42
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tests using term_wait() can still be flaky.
Solution: Increase the wait time when rerunning a test. (James McCoy,
closesvim/vim#5899) Halve the initial times to make tests run faster
when there is no rerun.
6a2c5a7dd5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Some tests fail when the system is slow.
Solution: Make the run number global, use in the test to increase the
waiting time. (closesvim/vim#5841)
3ed9efc2b1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Autocmd test fails on a slow system.
Solution: Adjust the expectations. (James McCoy, closesvim/vim#5685)
8fb1b47a5e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Some tests fail when run in the GUI.
Solution: Make sure the window width is enough. In the GUI run terminal Vim
in the terminal, if possible.
3180fe6c6d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: A couple of tests may fail when features are missing.
Solution: Check for features. (Dominique Pelle, closesvim/vim#5561)
705724e430
Just copy the two 'wincolor' test functions from Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: The mouse code is spread out.
Solution: Move all the mouse code to mouse.c. (Yegappan Lakshmanan,
closesvim/vim#4959)
b20b9e14dd
Also move getmousepos() there.
N/A patches for version.c:
vim-patch:8.1.2070: mouse code is spread out
Problem: Mouse code is spread out.
Solution: Move mouse terminal code parsing to mouse.c. (Yegappan Lakshmanan,
closesvim/vim#4966)
b8ff5c271e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: SafeState autocommand interferes with debugging.
Solution: Do not trigger SafeState while debugging. (closesvim/vim#9697)
46f3080e5c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: state() test fails on some Mac systems.
Solution: Increase the wait time. (closesvim/vim#4983)
b7a97ef340
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for SafeStateAgain may still fail.
Solution: Send another message to trigger SafeStateAgain.
0f6629a08a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for SafeState and SafeStateAgain may fail.
Solution: Accept more possible responses
513537bfff
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No tests for SafeState and SafeStateAgain.
Solution: Add tests.
cadbe1b1fb
This test is quite useless. Don't port to Lua.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No tests for state().
Solution: Add tests. Clean up some feature checks. Make "a" flag work.
c258549032
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: SafeStateAgain not triggered if callback uses feedkeys().
Solution: Check for safe state in the input loop. Make log messages easier
to find. Add 'S' flag to state().
d103ee7843
Include misc1.c change from patch 8.1.2062.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Not clear why SafeState and SafeStateAgain are not triggered.
Solution: Add log statements.
37d1807a80
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: SafeState may be triggered at the wrong moment.
Solution: Move it up higher to after where messages are processed. Add a
SafeStateAgain event to tigger there.
69198cb8c0
SafeStateAgain is N/A.
Move SafeState functions to state.c.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No easy way to process postponed work. (Paul Jolly)
Solution: Add the SafeState autocommand event.
8aeec40207
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: '.-' no allowed in highlight group names
Solution: Allow dot and hyphen characters in highlight group names
Allow dots and hyphens in group names. There does not seem
to be any reason for these to be disallowed.
closes: vim/vim#12807d4376dc3eb
Co-authored-by: Gregory Anders <greg@gpanders.com>
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: Cursor is adjusted in window that did not change in size by
'splitkeep'.
Solution: Only check that cursor position is valid in a window that
has changed in size.
closes: vim/vim#1250916af913eee
Co-authored-by: Luuk van Baal <luukvbaal@gmail.com>
Problem: no support for custom cmdline completion
Solution: Add new vimscript functions
Add the following two functions:
- getcmdcompltype() returns custom and customlist functions
- getcompletion() supports both custom and customlist
closes: vim/vim#1222892997dda78
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: crash when passing invalid buffer to undotree()
Solution: Use get_buf_arg() instead of tv_get_buf_from_arg().
closes: vim/vim#12862closes: vim/vim#12830ab9f2ecfd4
Problem: Visual highlight not working with cursor at end of screen line
and 'showbreak'.
Solution: Only update "vcol_prev" when drawing buffer text.
closes: vim/vim#128658fc6a1dae0
Problem: can't move to last non-blank char
Solution: Make g<end> behave like that
Make it possible to move to last non-blank char on a line
We can distinguish between g0 and g^ to move to the very first character
and the first non-blank char.
And while we can move to the last screen char, we cannot go to the last
non-blank screen char.
Since I think g$ is the more widely used and known movement command (and
g<end> is synonymous to it) change the behaviour of g<end> to move to
last non-screen char instead and don't have this be the same command as
the g$ command anymore.
If you want to keep the old behaviour, you can use:
```
nnoremap g<end> g$
```
Add a test to verify the behaviour.
closes: vim/vim#12593b5f6fe9ca2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: screenpos() may cause unnecessary redraw.
Solution: Don't unnecessarily reset VALID_WROW flag.
VALID_WROW flag is only used by two functions: validate_cursor() and
cursor_valid(), and cursor_valid() is only used once in ex_sleep().
When adjust_plines_for_skipcol() was first added in patch 9.0.0640, it
was called in two functions: comp_botline() and curs_rows().
- comp_botline() is called in two places:
- onepage(), which resets VALID_WROW flag immediately afterwards.
- validate_botline_win(), where resetting a VALID_ flag is strange.
- curs_rows() is called in two places:
- curs_columns(), which sets VALID_WROW flag afterwards.
- validate_cline_row(), which is only used by GUI mouse focus.
Therefore resetting VALID_WROW there doesn't seem to do anything useful.
Also, a w_skipcol check (which resets VALID_WROW flag) was added to
check_cursor_moved() in patch 9.0.0734, which seems to make more sense
than resetting that flag in the middle of a computation.
While at it make adjust_plines_for_skipcol() and textpos2screenpos() a
bit less confusing:
- Make adjust_plines_for_skipcol() return "off" instead of "n - off".
- Use 0-based "row" in textpos2screenpos() until W_WINROW is added.
closes: vim/vim#128326235a109c4
Problem: Missing test coverage for blockwise Visual highlight with
virtual that starts with a double-width char.
Solution: Add a new virtual text to the test. Some other small fixes.
closes: vim/vim#12835fc3058495d
Problem: Wrong curswant when clicking and the second cell of a
double-width char.
Solution: Don't copy virtcol of the first char to the second one.
closes: vim/vim#128429994160bfe
Problem: reverse() on string doesn't work in compiled function.
Solution: Accept string in argument type check. (Yegappan Lakshmanan,
closesvim/vim#12377)
f9dc278946
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: reverse() does not work for a String.
Solution: Implement reverse() for a String. (Yegappan Lakshmanan,
closesvim/vim#12179)
03ff1c2dde
vim-patch:9.0.1738: Duplicate code to reverse a string
Problem: Duplicate code to reverse a string
Solution: Move reverse_text() to strings.c and remove string_reverse().
closes: vim/vim#128474dd266cb66
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Counterintuitively, snprintf returns the number of characters it _should
have written_ if it had not encoutered the length bound, thus leading to
a potential buffer overflow.
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Wrong cursor position when clicking after concealed text
with 'virtualedit'.
Solution: Store virtual columns in ScreenCols[] instead of text
columns, and always use coladvance() when clicking.
This also fixes incorrect curswant when clicking on a TAB, so now
Test_normal_click_on_ctrl_char() asserts the same results as the ones
before patch 9.0.0048.
closes: vim/vim#12808e500ae8e29
Remove the mouse_adjust_click() function.
There is a difference in behavior with the old mouse_adjust_click()
approach: when clicking on the character immediately after concealed
text that is completely hidden, cursor is put on the clicked character
rather than at the start of the concealed text. The new behavior is
better, but it causes unnecessary scrolling in a functional test (which
is an existing issue unrelated to these patches), so adjust the test.
Now fully merged:
vim-patch:9.0.0177: cursor position wrong with 'virtualedit' and mouse click
Problem: cursor position wrong when clicking on an unprintable char
Solution: Don't update prev_ptr when wlv.n_extra is not zero.
closes: vim/vim#12664b25dbb3f9b
Tests only. Code superseded by patch 9.0.1725.
Problem: Cursor in wrong column with mouse click after concealed text.
Solution: Store the text column when drawing text.
b90818867c
Tests only. Code changes moved to the port of patch 9.0.1725.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: blockwise Visual highlight not working with virtual text
Solution: Reset the correct variable at the end of virtual selection and
Check for double-width char inside virtual text.
closes: vim/vim#126066e940d9a1d
Need to remove area_active and use wlv.fromcol and wlv.tocol directly.
bindzone runtime: add new DNS record types (vim/vim#7351)
Recognize some newer DNS record types - CAA (RFC8659, certificate authority authorization), OPENPGPKEY (RFC7929), SMIMEA (RFC8162). Sort SSHFP alphabetically while there.
442d1746f4
Co-authored-by: Stuart Henderson <sthen@users.noreply.github.com>
Problem: A double-width char in a floating window causes an extra
space to be drawn to the left of its boundary.
Solution: Only reset skipstart at the first column.
Fix#24775
Problem: screenpos() wrong result with w_skipcol and cpoptions+=n
Solution: Use adjust_plines_for_skipcol() instead of subtracting
w_skipcol.
closes: vim/vim#12625bfe377b8f2
Problem: missing winid argument for virtcol()
Solution: Add a {winid} argument to virtcol()
Other functions col(), charcol() and virtcol2col() support a {winid}
argument, so it makes sense for virtcol() to also support than.
Also add test for virtcol2col() with 'showbreak' and {winid}.
closes: vim/vim#12633825cf813fa
Problem: incorrect heights in win_size_restore()
Solution: avoid restoring incorrect heights in win_size_restore()
876f5fb570
I already merged this prior, so just replace the new test with the old one,
but add a test case for the global statusline.
Problem: Fix regression in {func} argument of reduce()
Solution: pass function name as string again
Before patch 9.0.0548, passing a string as {func} argument of reduce()
is treated as a function name, but after patch 9.0.0548 it is treated as
an expression instead, which is useless as reduce() doesn't set any v:
variables. This PR restores the behavior of {func} before that patch.
Also correct an emsg() call, as e_string_list_or_blob_required doesn't
contain format specifiers.
closes: vim/vim#12824ad0c442f1f
Problem: wrong error messages when passing wrong types to count()
Solution: fix it
This fixes two problems:
1. When passing wrong type to {ic} argument of count(), two error
messages are given, the second of which is misleading.
2. When passing wrong type to {comp} argument of count(), the error
message doesn't mention that {comp} may be a String.
closes: vim/vim#128254f389e7c0f
Problem: Implementation of some list functions too complicated.
Solution: Refactor do_sort_uniq(), f_count() and extend() (Yegappan
Lakshmanan, closesvim/vim#9378)
d92813a598
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Crash when collection is modified when using filter().
Solution: Lock the list/dict/blob. (Ernie Rael, closesvim/vim#12183)
e6d40dcdc7
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: reduce() with a compiled lambda could be faster.
Solution: Call eval_expr_typval() instead of call_func() directly.
f1c60d4bf1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Error message for wrong argument type is not specific.
Solution: Include more information in the error. (Yegappan Lakshmanan,
closesvim/vim#11037)
8deb2b30c7
Cherry-pick test_listdict.vim changes from patch 8.2.4809.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Accepting one and zero for the second sort() argument is strange.
Solution: Disallow using one and zero in Vim9 script.
2007dd49f5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Functions implementing reduce and map are too long.
Solution: Use a function for each type of value. Add a few more test cases
and add to the help. (Yegappan Lakshmanan, closesvim/vim#9370)
389b72196e
Partial port as this doesn't include handling for non-materialized List.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Cannot use reduce() for a string.
Solution: Make reduce() work with a string. (Naruhiko Nishino, closesvim/vim#9366)
0ccb5842f5
Omit tv_get_first_char() as it doesn't really save much code.
Co-authored-by: rbtnn <naru123456789@gmail.com>
Problem: Some lines of code not covered by tests.
Solution: Add a few more test cases. (Dominique Pellé, closesvim/vim#9453)
8bfa0eb863
Co-authored-by: Dominique Pelle <dominique.pelle@gmail.com>
Problem: Cannot use a script-local function for 'foldtext'.
Solution: Expand "s:" and "<SID>". (Yegappan Lakshmanan, closesvim/vim#9411)
27708e6c7b
Cherry-pick test_filter_map.vim change from patch 8.2.3871.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Leaking memory in map() and filter(), cannot use a string argument
in Vim9 script.
Solution: Fix the leak, adjust the argument check, also run the tests as
Vim9 script. (Yegappan Lakshmanan, closesvim/vim#9354)
2d877599ee
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot filter or map characters in a string.
Solution: Make filter() and map() work on a string. (Naruhiko Nishino,
closesvim/vim#9327)
c479ce032f
Co-authored-by: rbtnn <naru123456789@gmail.com>
Problem: Error for const argument to mapnew().
Solution: Don't give an error. (closesvim/vim#7400)
57cf4973a2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests run with Vim9.
Solution: Run a few more tests in Vim9 script and :def function. Fix
islocked(). Fix error for locking local variable.
bd77aa9274
Omit GLV_NO_DECL: Vim9 script only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests run with Vim9.
Solution: Run a few more tests in Vim9 script and :def function.
3e9c0b9608
Co-authored-by: Bram Moolenaar <Bram@vim.org>
According to `:h TSNode` docs, there's also `TSNode:sexpr()` and
`TSNode:has_error()` that is part of `TSNode` class, but this wasn't
documented in `treesitter/_meta.lua`.
Adding missing fields in so the types is similar to `:h TSNode`
Problem: dict-completion does not respect region
Solution: respect selected region in dict completion
Set do_region to zero as we don't want a complete dump of the matching
words, we want the code to filter them according to the user's selected
region.
closes: vim/vim#12792closes: vim/vim#7025e98fb643ec
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: virtcol2col returns last byte of a multi-byte char
Solution: Make it return the first byte for a multi-byte char
closes: vim/vim#12786closes: vim/vim#12799b209b86e66
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: getcompletion() "cmdline" fails after :autocmd
Solution: Use set_cmd_context() instead of set_one_cmd_context().
closes: vim/vim#12804e4c79d3615
Problem: Cannot use positional arguments for printf()
Solution: Support positional arguments in string formatting
closes: vim/vim#121400c6181fec4
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: dead code in charset.c
Solution: remove it
linetabsize_col() calls init_chartabsize_arg() with 0 as "lnum", so
cts.cts_has_prop_with_text is always FALSE.
closes: #PR
d3515a1e88
N/A patches for version.c:
vim-patch:9.0.1702: Undo test is flaky
Problem: getcompletion() failes for user-defined commands
Solution: set context for completion function
closes: vim/vim#12681closes: vim/vim#126808ef1fbc0c3
Co-authored-by: Christian Brabandt <cb@256bit.org>
Farewell to Bram and dedicate upcoming Vim 9.1 to him (vim/vim#12749)
e978b4534a
Also update the header for the following files that were converted to Vim9
script upstream:
- autoload/ccomplete.lua (vim9jitted)
- ftplugin.vim
- ftplugof.vim
- indent.vim
- indent/vim.vim
- makemenu.vim
This also updates the "Last Change" dates, even if some changes (due to rewrites
to Vim9 script) were not ported.
There's still a few other places where Bram is still mentioned as a maintainer
in the files we and Vim have:
- ftplugin/bash.vim
- indent/bash.vim
- indent/html.vim
- indent/mail.vim
- macros/accents.vim
- macros/editexisting.vim
- syntax/bash.vim
- syntax/shared/typescriptcommon.vim
- syntax/tar.vim
- syntax/typescript.vim
- syntax/typescriptreact.vim
- syntax/zimbu.vim
Maybe future patches will address that.
Also exclude changes to .po files that didn't apply automatically (the
`:messages` maintainer string isn't used in Nvim anyway).
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: incsearch test not sufficient (after 9.0.1691)
Solution: add an additional test
73b8209266
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem:
Treesitter highlighting is slow for large files with lots of injections.
Solution:
Only parse injections we are going to render during a redraw cycle.
---
- `LanguageTree:parse()` will no longer parse injections by default and
now requires an explicit range argument to be passed.
- `TSHighlighter` now parses injections incrementally during on_win
callbacks for the line range being rendered.
- Plugins which require certain injections to be parsed must run
`parser:parse({ start_row, end_row })` before using the tree.
Problem: Temporarily changing current window in a script causes
CursorMoved to be triggerd.
Solution: Don't trigger CursorMoved if neither curwin nor cursor
changed between two checks.
Problem: mapset() not properly handling script ID
Solution: replace_termcodes() may accept a script ID
closes: vim/vim#12699closes: vim/vim#126977e0bae024d
Problem: undotree() only works for the current buffer
Solution: Add an optional "buffer number" parameter to undotree(). If
omitted, use the current buffer for backwards compatibility.
closes: vim/vim#4001closes: vim/vim#122925fee111149
Co-authored-by: Devin J. Pohly <djpohly@gmail.com>
* feat(treesitter): add injection language fallback
Problem: injection languages are often specified via aliases (e.g.,
filetype or in upper case), requiring custom directives.
Solution: include lookup logic (try as parser name, then filetype, then
lowercase) in LanguageTree itself and remove `#inject-language`
directive.
Co-authored-by: Lewis Russell <me@lewisr.dev>
Problem:
With tsserver LSP, omni completion after "." inserts an extra "."
Solution:
Apply adjust_start_col() regardless of `filterText`.
adjust_start_col() is explained here:
0ea8dfeb3d/runtime/lua/vim/lsp.lua (L2334-L2351)
The `filterText` field is used in the following situations rather than as
a condition for obtaining column values:
1. Real-time filtering: When the user types characters in the editor, the
language server can use the filterText field to filter the list of
suggestions and only return suggestions that match the typed characters. This
helps to provide more precise recommendations.
2. Fuzzy matching: The filterText field can be used to perform fuzzy matching,
allowing matching in the middle or beginning of input characters, not limited
to prefix matching. This can provide a more flexible code completion
experience.
Inspecting usage of `filtertext` in vim-lsp and coc and lsp-mode:
- vim-lsp uses a `refresh_pattern` to judge filterText as completionitem word
(although I think this is not the correct usage).
- coc uses it for filtering.
Fix#22803
The terminal buffer closes automatically when using `:terminal` and the
command exits without an error. This messes up some tests that expect
the terminal buffer to still be open. We can force the buffer not to
close by passing an argument to `:terminal`. This can be anything, since
the shell-test stub simply prints whatever argument it's given.
When starting a terminal buffer that uses the default value of &shell
(e.g. when using `:terminal` or `termopen([&shell])`), automatically
close the buffer if the shell exits without an error.
This is a collection of various PRs from github that all require a minor
patch number:
1) https://github.com/vim/vim/pull/12612
Do not conflate dictionary key with end of block
2) https://github.com/vim/vim/pull/12729:
When saving and restoring 'undolevels', the constructs `&undolevels` and
`:set undolevels` are problematic.
The construct `&undolevels` reads an unpredictable value; it will be the
local option value (if one has been set), or the global option value
(otherwise), making it unsuitable for saving a value for later
restoration.
Similarly, if a local option value has been set for 'undolevels',
temporarily modifying the option via `:set undolevels` changes the local
value as well as the global value, requiring extra work to restore both
values.
Saving and restoring the option value in one step via the construct
`:let &undolevels = &undolevels` appears to make no changes to the
'undolevels' option, but if a local option has been set to a different
value than the global option, it has the unintended effect of changing
the global 'undolevels' value to the local value.
Update the documentation to explain these issues and recommend explicit
use of global and local option values when saving and restoring. Update
some unit tests to use `g:undolevels`.
3) https://github.com/vim/vim/pull/12702:
Problem: Pip requirements files are not recognized.
Solution: Add a pattern to match pip requirements files.
4) https://github.com/vim/vim/pull/12688:
Add indent file and tests for ABB Rapid
5) https://github.com/vim/vim/pull/12668:
Use Lua 5.1 numeric escapes in tests and add to CI
Only Lua 5.2+ and LuaJIT understand hexadecimal escapes in strings. Lua
5.1 only supports decimal escapes:
> A character in a string can also be specified by its numerical value
> using the escape sequence \ddd, where ddd is a sequence of up to three
> decimal digits. (Note that if a numerical escape is to be followed by a
> digit, it must be expressed using exactly three digits.) Strings in Lua
> can contain any 8-bit value, including embedded zeros, which can be
> specified as '\0'.
To make sure this works with Lua 5.4 and Lua 5.1 change the Vim CI to
run with Lua 5.1 as well as Lua 5.4
6) https://github.com/vim/vim/pull/12631:
Add hurl filetype detection
7) https://github.com/vim/vim/pull/12573:
Problem: Files for haskell persistent library are not recognized
Solution: Add pattern persistentmodels for haskell persistent library
closes: vim/vim#12612closes: vim/vim#12729closes: vim/vim#12702closes: vim/vim#12688closes: vim/vim#12668closes: vim/vim#12631closes: vim/vim#12573
Already ported but wasn't marked: vim-patch:ad34abee2583
6efb198033
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: lacygoill <lacygoill@lacygoill.me>
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Jacob Pfeifer <jacob@pfeifer.dev>
Co-authored-by: Borys Lykah <lykahb@fastmail.com>
Update the vimscript code for restoring cursor position
Using xxd(1) to filter and edit binary files causes the input files
to have dual nature, so to speak, which effectively makes restoring
the cursor position broken. Fix that by ignoring the "xxd" file type
in the code that restores the cursor position.
Interactive rebasing in git causes files to be edited in vim, which,
similarly to commit messages, are rarely the same as the last one
edited. Thus, also add "gitrebase" to the list of file types for
which the cursor position isn't restored.
While there, refactor the code a bit to possibly save a few CPU cycles
and to keep the line lengths in check, and use the long form of the
commands and variables, to make the code slightly more consistent and
more understandable to newcomers.
Update the relevant comments in the code and the associated parts of
the documentation, to keep them in sync with the updated code.
Remove some redundant trailing whitespace as well, as spotted.
81b8bf5b4a
Co-authored-by: Dragan Simic' via vim_dev <vim_dev@googlegroups.com>
Improve the vimscript code in ":h hex-editing"
Save and restore the view position before and after saving the buffer,
respectively, to keep the current view of the xxd(1)'s hex dump
unchanged after doing ":w", which previously caused the window to
scroll back to the very beginning of the buffer. I believe it's
needless to say how annoying and counterproductive that was.
Get rid of the "Press ENTER or type command to continue" message, which
was previously displayed after opening larger binary files. The use
of "silent" and "redraw" commands is tailored specifically to avoid
screen flickering, e.g. when doing ":w", which is caused by the buffer
being filtered by an external command.
Increase the number of octets per line, produced by xxd(1), from the
default value of 16 to 32. This puts bigger chunks of the hex dump
on the screen and makes the whole thing much more usable.
While there, reformat the code to make it more readable, and use the
long form of the commands and variables to make the code slightly more
consistent and more understandable to newcomers.
6a500661a9
Co-authored-by: Dragan Simic' via vim_dev <vim_dev@googlegroups.com>
Problem:
Nvim docs use "•" as a list item prefix but `gw{motion}` doesn't format
such lists by default.
Solution:
Change the 'comments' option to include "fb:•" by default.
If an iterator pipeline stage returns nil as its first return value, the
other return values are ignored and it is treated as if that stage
returned only nil (the semantics of returning nil are different between
different stages). This is consistent with how for loops work in Lua
more generally, where the for loop breaks when the first return value
from the function iterator is nil (see :h for-in for details).
Add filetype detection for eyaml files (vim/vim#12659)
https://github.com/voxpupuli/hiera-eyaml/ uses and produces the eyaml
format, which is simply yaml with some encrypted values.
It's convenient to edit the file without decrypting when not touching
encrypted values (or when you don't have access to the decryption key),
which is why vim should treat those files as yaml files.
b69b9d5e17
Co-authored-by: Max Gautier <mg@max.gautier.name>
feat(heex): borrow matchit support from html (vim/vim#12717)
* feat(heex): borrow matchit support from html
Makes % support behave the same in heex as in html. For example, quickly moving the cursor between opening and closing tags.
* Remove unnecessary line; define b:undo_ftplugin first
* Remove b:html_set_match_words
8967f6c4b9
Co-authored-by: Chris Vincent <chris.vincent@hey.com>
* vim-patch:44ff25d5243b
PyPA manifest files are not recognized (vim/vim#12707)
Problem: PyPA manifest files are not recognized.
Solution: Add a pattern to match PyPA manifest files.
44ff25d524
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Change "the" to "then" under ':help bufload()' (vim/vim#12662)
c2bd205254
N/A commits:
vim-patch:64dea84bb05a (we have our own manpager at home)
vim-patch:958e15bb1c7d (we have our own editorconfig syntax file)
vim-patch:c41b3c9f95ac (we don't have defaults.vim)
Co-authored-by: Daniel Steinberg <dstein64@users.noreply.github.com>
Currently (as of nvim 0.9), the behavior of boolean params in
vim.api lua wrappers is inconsistent for optional parameters
(part of an `opts` dict) compared to positional parameters.
This was inadvertently changed in #24524 . While cleaning up this
inconsistency is something we might want eventually, it needs
to be discussed separately and the impact of existing code considered.
docs(MAINTAIN.md): update deprecation policy
Refine a deprecation policy and add another deprecation period in which
a feature is only deprecated via documentation and does not issue a
warning.
Problem: luals returns stricter diagnostics with bundled luarc.json
Solution: Improve some function and type annotations:
* use recognized uv.* types
* disable diagnostic for global `vim` in shared.lua
* docs: don't start comment lines with taglink (otherwise LuaLS will interpret it as a type)
* add type alias for lpeg pattern
* fix return annotation for `vim.secure.trust`
* rename local Range object in vim.version (shadows `Range` in vim.treesitter)
* fix some "missing fields" warnings
* add missing required fields for test functions in eval.lua
* rename lsp meta files for consistency
Problem: When "triage" job is run after "type-scope" job, it may
remove labels added by the "type-scope" job.
Solution: Run "type-scope" job after "triage" job.
Problem: Tests may leave leftover files around
Solution: Clean up tests and remove files
There were a few failures in 'linux (huge, gcc, testgui, true, true)'
e.g. here: https://github.com/vim/vim/actions/runs/5497376153/jobs/10018060156
,----
| Error detected while processing command line..script /home/runner/work/vim/vim/src/testdir/runtest.vim[585]..function RunTheTest[54]..Test_lvimgrep_crash[16]..TestTimeout[12]..VimLeavePre Autocommands for "*"..function EarlyExit[7]..FinishTesting:
| line 70:
| E445: Other window contains changes
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txt
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txt
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txtmalloc(): unsorted double linked list corrupted
`----
Which is puzzling, because the Xtest_stable_xxd file should have been
long gone after test_crypt.vim is run (and definitely no longer be
staying around in test_quickfix.vim).
So try to clean up properly after a test script is run, just in case any
X<file> is still around. During testing, a found a few leftover files,
which I also fixed in the relevant test-file.
Unfortunately, the test workflow 'linux (huge, gcc, testgui, true,
true)' now seems to fail with 'E1230: Encryption: sodium_mlock()' in
test_crypt.vim. Hopefully this is only temporary.
84bc00e9b5
Co-authored-by: Christian Brabandt <cb@256bit.org>
These two functions seem to have previously had their docs start on the same
line as the signature, which I guess contributed to the lines being lost (though
I checked all other such functions from before again and these were the only
two).
When an injection has not set include children, make sure not to add
the injection if no ranges are determined.
This could happen when there is an injection with a child that has the
same range as itself. e.g. consider this Makefile snippet
```make
foo:
$(VAR)
```
Line 2 has an injection for bash and a make variable reference. If
include-children isn't set (default), then there is no range on line 2
to inject since the variable reference needs to be excluded.
This caused the language tree to return an empty range, which the parser
now interprets to mean the full buffer. This caused makefiles to have
completely broken highlighting.
Problem: Blade files are not recognized.
Solution: Add a pattern for Blade files. (closesvim/vim#12650)
ad34abee25
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot break undo by setting 'undolevels' to itself in
'inccommand' preview callback.
Solution: Don't set an invalid 'undolevels' value.
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
* docs(options): take ownership of options.txt
- `src/nvim/options.lua` is now the source of truth
- generate runtime/lua/vim/_meta/options.lua
* fixup! zeer comments
* fixup! zeer comments (2)
* fixup! re-enable luacheck
* fixup! regen
PR #23689 assumes `client.config.capabilities.workspace.didChangeWatchedFiles`
exists when checking `dynamicRegistration`, but thats's true only if it was
passed to `vim.lsp.start{_client}`.
This caused #23806 (still an issue in v0.9.1; needs manual backport), but #23681
fixed it by defaulting `config.capabilities` to `make_client_capabilities` if
not passed to `vim.lsp.start{_client}`.
However, the bug resurfaces on HEAD if you provide a non-nil `capabilities` to
`vim.lsp.start{_client}` with missing fields (e.g: not made via
`make_client_capabilities`).
From what I see, the spec says such missing fields should be interpreted as an
absence of the capability (including those indicated by missing sub-fields):
https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#clientCapabilities
Also, suggest `vim.empty_dict()` for an empty dict in
`:h vim.lsp.start_client()` (`{[vim.type_idx]=vim.types.dictionary}`
no longer works anyway, probably since the cjson switch).
Problem:
- Notifications are missing from `lsp.Methods`.
- Need a way to represent `$/` prefixed methods.
Solution:
- Generate notifications.
- Use "dollar_" prefix for `$/` methods.
Now that we "own" builtin.txt, we cant remove the repetitive mention of
Vimscript's UFCS syntax. It's noisy to mention this for each function,
and it's also not a Vimscript feature that should be encouraged.
Also change the builtin.txt heading to "NVIM REFERENCE MANUAL", which
indicates when a help file is Nvim-owned.
Problem: cache paths are derived by replacing each reserved/filesystem-
path-sensitive char with a `%` char in the original path. With this
method, two different files at two different paths (each containing `%`
chars) can erroneously resolve to the very same cache path in certain
edge-cases.
Solution: derive cache paths by url-encoding the original (path) instead
using `vim.uri_encode()` with `"rfc2396"`. Increment `Loader.VERSION` to
denote this change.
Problem:
"Failed to delete autocmd" error when deleting LspNotify autocmd. #24456
Solution:
Change a few things in the inlay_hint and diagnostic LSP code:
1. Re-introduce the `enabled` flag for the buffer state tables. Previously I was
relying on the presence of an autocmd id in the state table to track whether
inlay_hint / diagnostic was enabled for a buffer. There are two reasons why
this doesn't work well:
- Each time inlay_hint / diagnostic is enabled, we call `nvim_buf_attach` on
the buffer, resulting in multiple `on_reload` or `on_detach` callbacks being
registered.
- Commands like `bwipeout` delete buffer local autocmds, sometimes before our
`on_detach` callbacks have a chance to delete them first. This causes the
- Use module local enabled state for diagnostic as well. bwipeout can race
with on_detach callbacks for deleting autocmds. Error referenced in #24456.
2. Change the `LspDetach` autocmd to run each time (i.e., remove the `once`
flag). Since we're only registering autocmds once per buffer now, we
need to make sure that we set the enabled flag properly each time the LSP
client detaches from the buffer.
- Remove `once` from the LspDetach autocmds for inlay_hint and diagnostic.
We only set up the autocmd once now. Gets removed when buffer is deleted.
3. Have the `LspNotify` handler also refresh the inlay_hint / diagnostics when
receiving the `textDocument/didOpen` event. Before this point, the LSP
backend doesn't have the contents of the buffer, so can't provide inlay hints
or diagnostics.
Downsides of this approach:
* When inlay_hint / diagnostics are disabled on a buffer, it will continue to
receive `LspNotify` events for that buffer. The callback exits early since the
`enabled` flag is false.
Alternatives:
* Can we wrap the call to `nvim_del_autocmd` in `pcall` to swallow any errors
resulting from trying to delete the autocmd?
Fixes#24456
Helped-by: Maria José Solano <majosolano99@gmail.com>
Problem: Using nvim_feedkeys in default mappings makes it hard to use
them as a part of another mapping.
Solution: Use an expression mapping and stop Visual mode later.
Fix#24518.
- eval.lua is now the source of truth.
- Formatting is much more consistent.
- Fixed Lua type generation for polymorphic functions (get(), etc).
- Removed "Overview" section from builtin.txt
- Can generate this if we really want it.
- Moved functions from sign.txt and testing.txt into builtin.txt.
- Removed the *timer* *timers* tags since libuv timers via vim.uv should be preferred.
- Removed the temp-file-name tag from tempname()
- Moved lueval() from lua.txt to builtin.txt.
* Fix indent
* fixup!
* fixup! fixup!
* fixup! better tag formatting
* fixup: revert changes no longer needed
* fixup! CI
---------
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: 'inccommand' doesn't restore 'undolevels' properly for a
buffer shown in multiple windows.
Solution: Don't save information of a buffer twice.
Currently it only skips if `Rows` changed, but it's possible for the height of
the usable area for windows to change (e.g: via `&ch`, `&stal` or `&ls`), which
can cause the value of `&cmdheight` to change when the sizes are restored.
This is a Vim bug, so I've submitted a PR there too. No telling when it'll be
merged though, given the current lack of activity there.
`ROWS_AVAIL` is convenient here, but also subtracts the `global_stl_height()`.
Not ideal, as we also care about the height of the last statusline for other
values of `&ls`. Meh.
Introduce `last_stl_height` for getting the height of the last statusline and
use it in `win_size_save/restore` and `last_status` (means
`last_status_rec`'s `statusline` argument will now be true if `&ls` is 3,
but that does not change the behaviour).
Also corrects the logic in `comp_col` to not assume there's a last statusline
if `&ls` is 1 and the last window is floating.
This aligns its behaviour better with `nvim_win_close`.
Note that `:hide` is actually incapable of closing the cmdwin, unlike `:close`
and `:quit`, so this is a bit of a difference in behaviour.
Disallow closing the previous window from `nvim_win_close`, as this will cause
issues.
Again, no telling how safe this is. It also requires exposing old_curwin. :/
Also note that it's possible for the `&cmdheight` to change if, for example,
there are 2 tabpages and `nvim_win_close` is used to close the last window in
the other tabpage while `&stal` is 1. This is addressed in a later commit.
Problem: As discussed on Matrix, there was some interest in having
`nvim_open_win` again be able to open floats in the cmdwin (e.g: displaying a
hover doc related to what's in the cmdwin). After #23228, this was disallowed.
Solution: Allow `nvim_open_win` in the cmdwin as long as `!enter` and
`buffer != curbuf` (the former can cause all sorts of issues, and the latter
can crash Nvim after closing cmdwin). Also allow `nvim_win_set_buf` in a similar
fashion.
Note that we're not *entirely* sure if this is 100% safe (cmdwin is a
global-state-using-main-loop-calling beast), but this seems to work OK..?
Also:
- Check the buffer argument of `nvim_open_win` earlier, and abort if it's
invalid (it used to still open a window in this case).
- Untranslate `e_cmdwin` errors in the API (other errors in the API are not
translated: although not detailed in the API contract yet, errors are
supposed to be stable).
When signature is a bit long or there are too many tags, the tags appear
before the signature's line. Don't include the line with tags in the
previous function' docs.
Also fix lint warnings.
Problem: The evalfunc.c file is too big.
Solution: Move undo functions to undo.c. Move cmdline functions to
ex_getln.c. Move some container functions to list.c.
08c308aeb5
Undo functions only. Cmdline functions have already been moved.
A lot of container functions have been added to eval/funcs.c instead of
list.c in previously ported Vim 8.2.x patches, so deal with that later.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem:
The cmdpreview saved undo nodes on cmdpreview_prepare() from ex_getln.c may
become invalid (free) if the preview function makes undo operations, causing
heap-use-after-free errors.
Solution:
Save the buffer undo list on cmdpreview_prepare)_ and start a new empty one. On
cmdpreview_restore_state(), undo all the entries in the new undo list and
restore the original one. With this approach, the preview function will be
allowed to undo only its own changes.
Fix#20036Fix#20248
Problem: No test for bad use of spaces in help files.
Solution: Add checks for use of spaces in help files. Ignore intentional
spaces. (Hirohito Higashi, closesvim/vim#11952)
d950984489
Cherry-pick changes from patch 9.0.1604.
Co-authored-by: h-east <h.east.727@gmail.com>
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem:
Content that has codeblocks with different languages, results in
multiple calls to:
syntax include vim syntax/vim.vim
which raises error:
E403: syntax sync: line continuations pattern specified twice
Before ba8f19ebb6, this was avoided by
using pcall() to ignore the error.
Solution:
Restore the use of pcall() to ignore the error.
We plan to replace this logic with a treesitter approach, so this is
good enough for now.
Fix#24431
* fix(lsp): replace @private with @nodoc for public client functions
To prevent lua-ls warnings in plugins which use the functions.
* fix(lsp): remove duplicate type annotations/class definitions
These annotations became duplicate with https://github.com/neovim/neovim/pull/23750
When adding `workspace/didChangeWorkspaceFolders` support to my [language server](https://github.com/elixir-tools/next-ls), I noticed that when neovim removes a workspace, it sends an empty table (which is serialized to an empty JSON array) for the value in the `added` field.
This does not follow the spec; the `added` table should just be empty.
The following error led me to this discovery. Note the payload includes `"added" => [[]]`:
```
22:46:48.476 [error] LSP Exited.
Last message received: handle_notification %{"jsonrpc" => "2.0", "method" => "workspace/didChangeWorkspaceFolders", "params" => %{"event" => %{"added" => [[]], "removed" => [%{"name" => "/Users/mitchell/src/gen_lsp", "uri" => "file:///Users/mitchell/src/gen_lsp"}]}}}
** (MatchError) no match of right hand side value: {:error, %{"params" => %{"event" => %{"added" => [error: "expected a map"]}}}}
(gen_lsp 0.4.0) lib/gen_lsp.ex:265: anonymous fn/4 in GenLSP.loop/3
(gen_lsp 0.4.0) lib/gen_lsp.ex:292: GenLSP.attempt/3
(stdlib 5.0.2) proc_lib.erl:241: :proc_lib.init_p_do_apply/3
```
In the case you hit this warning in a buffer (like with C++ and clangd),
this message potentially fires over and over again making it difficult
to use the editor at all.
Problem:
netrw may conflict with the Nvim default "gx" mapping.
Solution:
Initialize keymapping earlier by moving it to vim._init_default_mappings().
That also avoids needing to check maparg().
Problem: Cannot drag a vertical separator to the right of a window
whose 'statuscolumn' is wider than itself.
Solution: Never treat a click on a vertical separator as a click on
'statuscolumn'.
Problem:
When the CurSearch highlight group is set, and a search is active and
you are listening to the remote UI "win_viewport" events, then typing is
very unresponsive, because "win_viewport" is not sent as soon as the
character is typed. On the other hand if you refresh the screen on
"flush", the screen will scroll with a delay since "win_viewport" comes
too late. I estimate this delay be up to one second, but it varies.
Solution:
Call validate_cursor() before drawing the screen, just like other modes.
No tests have been added because only the intermediate state is wrong.
Avoid consecutive RPC requests involving :startinsert or :stopinsert,
because consecutive RPC requests may be processed together, before the
:startinsert or :stopinsert takes effect.
Also change some feed_command() to command() to make tests faster.
Problem:
On Windows, `rundll32` exits zero (success) even when given
a non-existent file.
Solution:
Mock vim.system() on Windows to force a "failure" case.
Previously, when using foldmethod=indent, inserting an unindented line
would inadvertently open closed folds below it.
As a performance improvement, folds were only updated once, across all
lines, after Insert mode was exited.
Now, the performance improvement is no longer being used when
foldmethod=indent, so folds are updated multiple times during Insert
mode, but only across the lines that are changing, which preserves the
folds (and their open/close states) instead of recreating them.
* docs(lua): teach lua2dox how to table
* docs(lua): teach gen_vimdoc.py about local functions
No more need to mark local functions with @private
* docs(lua): mention @nodoc and @meta in dev-lua-doc
* fixup!
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
---------
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem:
helpers.tmpname() may create a local file, depending on circumstances.
Solution:
Only use helpers.tmpname() for its parent directory (the "temp root").
Use fs_mkdtemp() to actually get a unique name.
Problem:
If clipboard job exits by signal, the exit code is >=128:
939d9053bd
xclip 0.13 often exits with code 143, which spams unhelpful messages:
clipboard: error invoking xclip: Waiting for selection requests,
Control-C to quit Waiting for selection request number 1
Solution:
Don't show a warning if the clipboard tool exit code is >=128.
Fixes: #7054
Problem:
Bash language server returns "hover" markdown content that starts with
a code fence and info string of `man` preceded by whitespace, which Nvim
does not render properly.
See 0ee73c53ce/server/src/server.ts (L821C15-L821C15)
```typescript
function getMarkdownContent(documentation: string, language?: string): LSP.MarkupContent {
return {
value: language
? // eslint-disable-next-line prefer-template
['``` ' + language, documentation, '```'].join('\n')
: documentation,
kind: LSP.MarkupKind.Markdown,
}
}
```
For example,
```
``` man
NAME
git - the stupid content tracker
```
```
If I remove the white space, then it is properly formatted.
```
```man instead of ``` man
```
Per CommonMark Spec https://spec.commonmark.org/0.30/#info-string
whitespace is allowed before and after the `info string` which
identifies the language in a codeblock.
> The line with the opening code fence may optionally contain some text
> following the code fence; this is trimmed of leading and trailing
> spaces or tabs and called the [info
> string](https://spec.commonmark.org/0.30/#info-string). If the [info
> string](https://spec.commonmark.org/0.30/#info-string) comes after
> a backtick fence, it may not contain any backtick characters. (The
> reason for this restriction is that otherwise some inline code would
> be incorrectly interpreted as the beginning of a fenced code block.)
Solution:
Adjust stylize_markdown() to allow whitespace before codeblock info.
* perf(rtp): reduce rtp scans
Problem:
Scanning the filesystem is expensive and particularly affects
startuptime.
Solution:
Reduce the amount of redundant directory scans by relying less on glob
patterns and handle vim and lua sourcing lower down.
Problem: Cursor is not after inline virtual text with left gravity
when inserting after the end of the line.
Solution: Add width of inline virtual text with left gravity to cursor
virtcol in Insert mode even if on a NUL.
Extreme testcase:
```lua
vim.fn.setline(1, 'foobar')
local ns = vim.api.nvim_create_namespace('')
for _ = 1, 100000 do
vim.api.nvim_buf_set_extmark(0, ns, 0, 3, {})
end
local start_time = vim.loop.hrtime()
vim.fn.virtcol('$')
local stop_time = vim.loop.hrtime()
print(stop_time - start_time)
```
Before #20130: 31696
On master branch: 26191344
After this PR: 37692
Problem: Bashslashes added as regexp in runtime completion may be
treated as path separator with some 'isfname' value.
Solution: Make curly braces work for runtime completion and use it.
Problem:
The default "#" mapping fails on the following example after v$h# with
cursor at start of the first line:
aa?/\bb
aa
aa?/\bb
Solution:
Also escape "?".
Problem:
Lua functions that return multiple results are declared by using
multiple `@return` docstring directives. But the generated docs don't
make it obvious what this represents.
Solution:
- Generate a "Return (multiple)" heading for multiple-value functions.
- Fix `@note` directives randomly placed after `@return`.
Problem: `hl_mode` for inlay hints is `combine`, causing bugs like
inlay hints using highlights from the previous character
(#24152, #24068)
Solution: Don't use hl_mode=combine for inlay hints.
* feat(lua): allow vim.wo to be double indexed
Problem: `vim.wo` does not implement `setlocal`
Solution: Allow `vim.wo` to be double indexed
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
Problem: When using treesitter foldexpr,
* :diffput/get open diff folds, and
* folds are not updated in other windows that contain the updated
buffer.
Solution: Update folds in all windows that contain the updated buffer
and use expr foldmethod.
Problem:
The parent commit added a new vim.get_visual_selection() function to
improve visual star. But that is redundant with vim.region(). Any
current limitations of vim.region() should be fixed instead of adding
a new function.
Solution:
Delete vim.get_visual_selection().
Use vim.region() to get the visual selection.
TODO: fails with visual "block" selections.
Problem:
Visual mode "*", "#" mappings don't work on text with "/", "\", "?", and
newlines.
Solution:
Get the visual selection and escape it as a search pattern.
Add functions vim.get_visual_selection and _search_for_visual_selection.
Fix#21676
Problem:
Sometimes, when nvim sends the `win_viewport` event, for example when scrolling
with visible folds on the screen, it reports the `scroll_delta` value one batch
into "future". So when the client application is trying to show the new viewport
it's not yet updated, resulting in temporary corruption / screen flickering.
For more details see #23609, and starting from [this comment](
https://github.com/neovide/neovide/pull/1790#issuecomment-1518697747) in
https://github.com/neovide/neovide/pull/1790,, where the issue was first
detected. Note that some of the conclusions in those are not fully accurate, but
the general observations are.
Solution:
When there are pending updates to a Window, delay the `win_viewport` UI event
until the updates are sent. This ensures that there's no flush between sending
the viewport and updating of the lines corresponding to the new viewport.
Document the existing viewport behaviour (for cases where there are no
extra flushes), give a hint about how applications can deal with the slightly
surprising behaviour of the viewport event being sent after the updates.
Fixes https://github.com/neovim/neovim/issues/23609
Problem: nvim_buf_set_text(), nvim_open_term() and termopen() all change buffer
text, which is forbidden during textlock. Additionally, nvim_open_term() and
termopen() may be used to convert the cmdwin buffer into a terminal buffer,
which is weird.
Solution: Allow nvim_buf_set_text() and nvim_open_term() in the cmdwin, but
disallow nvim_open_term() from converting the cmdwin buffer into a terminal
buffer. termopen() is not allowed in the cmdwin (as it always operates on
curbuf), so just check text_locked().
Also happens to improve the error in #21055: nvim_buf_set_text() was callable
during textlock, but happened to check textlock indirectly via u_save();
however, this caused the error to be overwritten by an unhelpful "Failed to
save undo information" message when msg_list == NULL (e.g: an `<expr>` mapping
invoked outside of do_cmdline()).
Problem: some API functions that check textlock (usually those that can change
curwin or curbuf) can break the cmdwin.
Solution: make FUNC_API_CHECK_TEXTLOCK call text_locked() instead, which already
checks for textlock, cmdwin and `<expr>` status.
Add FUNC_API_TEXTLOCK_ALLOW_CMDWIN to allow such functions to be usable in the
cmdwin if they can work properly there; the opt-in nature of this attribute
should hopefully help mitigate future bugs.
Also fix a regression in #22634 that made functions checking textlock usable in
`<expr>` mappings, and rename FUNC_API_CHECK_TEXTLOCK to FUNC_API_TEXTLOCK.
Problem:
Showing an error via vim.notify() makes it awkward for callers such as
lsp/handlers.lua to avoid showing redundant errors.
Solution:
Return the message instead of showing it. Let the caller decide whether
and when to show the message.
---
Rejected experiment: move vim.ui.open() to vim.env.open()
Problem:
`vim.ui` is where user-interface "providers" live, which can be
overridden. It would also be useful to have a "providers" namespace for
platform-specific features such as "open", clipboard, python, and the other
providers listed in `:help providers`. We could overload `vim.ui` to
serve that purpose as the single "providers" namespace, but
`vim.ui.nodejs()` for example seems awkward.
Solution:
`vim.env` currently has too narrow of a purpose. Overload it to also be
a namespace for `vim.env.open`.
diff --git a/runtime/lua/vim/_meta.lua b/runtime/lua/vim/_meta.lua
index 913f1fe20348..17d05ff37595 100644
--- a/runtime/lua/vim/_meta.lua
+++ b/runtime/lua/vim/_meta.lua
@@ -37,8 +37,28 @@ local options_info = setmetatable({}, {
end,
})
-vim.env = setmetatable({}, {
- __index = function(_, k)
+vim.env = setmetatable({
+ open = setmetatable({}, {
+ __call = function(_, uri)
+ print('xxxxx'..uri)
+ return true
+ end,
+ __tostring = function()
+ local v = vim.fn.getenv('open')
+ if v == vim.NIL then
+ return nil
+ end
+ return v
+ end,
+ })
+ },
+ {
+ __index = function(t, k, ...)
+ if k == 'open' then
+ error()
+ -- vim.print({...})
+ -- return rawget(t, k)
+ end
local v = vim.fn.getenv(k)
if v == vim.NIL then
return nil
Problem: in #24046 the signature of buf.clear_references() changed, which
indirectly breaks callers that were passing "ignored" args.
Solution: because util.buf_clear_references() already defaulted to "current buffer",
the change to buf.clear_references() isn't actually needed, so just revert it.
perf(treesitter): cache vim.treesitter.query.get
Problem:
vim.treesitter.query.get searches and reads query files every time it's
called, if user hasn't overridden the query. So this can incur slowdown
when called frequently.
This can happen when using treesitter foldexpr. For example, when using
`:h :range!` in markdown file to format fenced codeblock, on_changedtree
in _fold.lua is triggered many times despite that the tree doesn't have
syntactic changes (might be a bug in LanguageTree). (Incidentally, the
resulting fold is incorrect due to a bug in `:h range!`.) on_changedtree
calls vim.treesitter.query.get for each tree changes. In addition, it
may request folds queries for injected languages without fold queries,
such as markdown_inline.
Solution:
* Cache the result of vim.treesitter.query.get.
* If query file was not found, fail quickly at later calls.
Problem: Tabline highlight wrong after truncated double width label.
Solution: Fill up half a double width character later. (closesvim/vim#12614)
d392a74c5a
Problem:
nvim_parse_cmd() in pcall() may show an error message (side-effect):
:lua pcall(vim.api.nvim_parse_cmd, vim.fn.getcmdline(), {})
E16: Invalid range
Solution:
Avoid emsg() in the nvim_parse_cmd() codepath.
- refactor(api): add error message output parameter to get_address()
- fix: null check emsg() parameter
- refactor: remove emsg_off workaround from do_incsearch_highlighting()
- refactor: remove emsg_off workaround from cmdpreview_may_show()
- refactor: remove remaining calls to emsg() from parse_cmd_address() and get_address()
- (refactor): lint set_cmd_dflall_range()
- refactor: addr_error() - move output parameter to return value
Fix#20339
TODO:
These are the functions called by `get_address()`:
```
nvim_parse_cmd() -> parse_cmdline() -> parse_cmd_address() -> get_address()
skipwhite()
addr_error()
qf_get_cur_idx()
qf_get_cur_valid_idx()
qf_get_size()
qf_get_valid_size()
mark_get()
mark_check()
assert()
skip_regexp()
magic_isset()
> do_search()
> searchit()
ascii_isdigit()
getdigits()
getdigits_int32()
compute_buffer_local_count()
hasFolding()
```
From these functions, I found at least two that call emsg directly:
- do_search()
- seems to be simple to refactor
- searchit()
- will be more challenging because it may generate multiple error messages,
which can't be handled by the current `errormsg` out-parameter.
For example, it makes multiple calls to `vim_regexec_multi()` in a loop that
possibly generate error messages, and later `searchit()` itself may generate
another one:
- c194acbfc4/src/nvim/search.c (L631-L647)
- c194acbfc4/src/nvim/search.c (L939-L954)
---------
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem:
`nvim -v` and `:version` prints system vimrc, fallback files, and compilation
info by default, which most people don't care about and just clutters up the
output.
Solution:
Omit extra info unless 'verbose' is set.
- fix lint / analysis warnings
- locations_to_items(): get default offset_encoding from active client
- character_offset(): get default offset_encoding from active client
Commit 37079fc moved inlay_hint to vim.lsp() but in the process did
missed converting a call to disable/enable which are now local.
Fixes the below error when trying to toggle inlay hints.
E5108: Error executing lua /usr/local/share/nvim/runtime/lua/vim/lsp/inlay_hint.lua:248: attempt to call field 'disable' (a nil value)
stack traceback:
/usr/local/share/nvim/runtime/lua/vim/lsp/inlay_hint.lua:248: in function 'toggle'
/usr/local/share/nvim/runtime/lua/vim/lsp/inlay_hint.lua:310: in function 'inlay_hint'
[string ":lua"]:1: in main chunk
Problem:
vim_lsp_inlayhint: Error executing lua: .../lsp/_inlay_hint.lua:249: attempt to index field 'applied' (a nil value)
Solution:
Assign {} to bufstates.applied in on_reload
fixes#24172
Problem: Termdebug: error with more than 99 breakpoints.
Solution: Use a different sign for breakpoint 100 and over. (closesvim/vim#12589,
closesvim/vim#12588)
e7d9ca2b3b
Co-authored-by: skywind3000 <skywind3000@163.com>
Use the actual width of the 'statuscolumn' to allocate and fill its click definition array.
The returned width of the built statuscolumn string may be shorter (and is padded later).
Problem:
`:lua vim.cmd.win_getid(30,10)` is interpreted as `:win[size] 30 10`.
User intention was to call `vim.fn.win_getid(30,10)`.
Solution:
Check that the `cmd` actually matches the resolved command.
Problem: Resetting local option to global value is inconsistent.
Solution: Handle "<" specifically for 'scrolloff' and 'sidescrolloff'.
(closesvim/vim#12594)
bf5f189e44
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Treesitter fold is not updated if treesitter hightlight is not
active. More precisely, updating folds requires `LanguageTree:parse()`.
Solution: Call `parse()` before computing folds and compute folds when
lines are added/removed.
This doesn't guarantee correctness of the folds, because some changes
that don't add/remove line won't update the folds even if they should
(e.g. adding pair of braces). But it is good enough for most cases,
while not introducing big overhead.
Also, if highlighting is active, it is likely that
`TSHighlighter._on_buf` already ran `parse()` (or vice versa).
Problem: Regression test doesn't fail when fix is reverted.
Solution: Add "n" to 'cpoptions' instead of using :winsize. (closesvim/vim#12587,
issue vim/vim#12528)
e429893741
Problem: Not all cabal config files are recognized.
Solution: Add a couple of patterns. (Marcin Szamotulski, closesvim/vim#12463)
166cd7b801
Also:
- Do not expand Lua patterns in environment variables used in file patterns.
- Test $XDG_CONFIG_HOME on Windows, as it can be used by Nvim (and the runner
sets it).
Co-authored-by: Marcin Szamotulski <coot@coot.me>
Problem:
Using "nvim -l args.lua" without passing extra script args, does not set `_G.arg[0]`.
Steps to reproduce:
```
cat > args.lua<<EOF
vim.print(_G.arg, '')
vim.print(vim.v.argv, '')
EOF
nvim --clean -l args.lua
```
Solution:
Fix condition in command_line_scan.
Prepare for https://github.com/neovim/tree-sitter-vimdoc/pull/108 which improves
`{arg}` highlighting in many common cases:
vim.foo({bar})
vim.foo( {bar})
nvim_foo({bar})
nvim_foo({bar},{baz})
nvim_foo({bar}, {baz})
foo[{buf}]
The tradeoff is that things like `"[{"` are flagged as parse errors.
We could avoid if we drop support for `foo[{buf}]`, but that is rather common
(see `builtin.txt`).
Problem: vimdoc parser requires space between column heading and `~`.
Solution: Add space to docs (and mention it). Also edit `luaref.txt`
headings for consistency.
Problem: Empty CmdlineEnter autocommand causes errors in Ex mode.
Solution: Save and restore ex_pressedreturn. (Christian Brabandt,
closes # 12581, closesvim/vim#12578)
590aae3557
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Error from term_start() not caught by try/catch.
Solution: save and restore did_emsg when applying autocommands. (Ozaki
Kiichi, closesvim/vim#9361)
c3f91c0648
Co-authored-by: ichizok <gclient.gaap@gmail.com>
Problem:
In the generated docs HTML there is too much whitespace before/after `<pre>`
blocks.
- In the old layout (fixed-width), all text in `.old-help-para` is formatted as
`white-space:pre`.
- In the new layout, when `<pre>` is at the end of a `<div>`, the margins of
both are redundant, causing too much space.
Solution:
- In the old layout, always remove `<pre>` margin.
- In the new layout, disable `<pre>` margin if it is the last child.
Problem: bundled `ftplugin/foo/*.vim` are sourced before user
`ftplugin/foo.vim`.
Solution: call `runtime!` once on all patterns to be sourced.
Followup to #23801. Fixes#24003.
Problem: Termdebug on MS-Windows: some file names are not recognized.
Solution: Do not always change \t and \n. (Christian Brabandt,
closesvim/vim#12565, closesvim/vim#12560, closesvim/vim#12550)
c9a4a8ab28
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
On running `zig fmt` manually, the on_lines callback and the
server both detach (for some reason), and both of them call
`clear()`. This fixes it, otherwise the second one to detach
has an error in `reset_timer` since the bufstate doesn't exist
Solution:
* exit early in clear if `bufstates[bufnr]` is nil
* set bufstatte.enabled to true on reload instead of making bufstate nil
This will abort if lint programs are not found, and is meant primarily
for the lint job in CI. Supersedes the REQUIRED argument in
add_glob_target as it's a superior replacement by being a built-in
solution.
Problem: Not all filetype file name matches are tested.
Solution: Add more file names to test with. (Jonas Strittmatter,
closesvim/vim#12569)
bd087ae8f0
Co-authored-by: smjonas <jonas.strittmatter@gmx.de>
Problem:
The decoration provider clears the whole buffer then redraws all the hints every
time the window was redrawn. This may lead to an infinite loop.
Solution:
Store the last applied version for a line and only clear and redraw the line if
the buffer version has changed.
Redrawing of 'statusline' and 'winbar' are actually already inhibited by
RedawingDisabled in Ex mode.
In Vim there is a check for `msg_scrolled == 0` (which is false in Ex
mode) since Vim doesn't have msgsep. Add a `!exmode_active` check here
in Nvim instead.
Problem: zserio files are not recognized.
Solution: Add a pattern for zserio files. (Dominique Pellé,
closesvim/vim#12544)
2b994da57a
Co-authored-by: =?UTF-8?q?Dominique=20Pell=C3=A9?= <dominique.pelle@gmail.com>
There is no need for two ways to access all clients of a buffer.
This doesn't add a `vim.deprecate` call yet, as the function is probably
used a lot, but removes it from the documentation and annotates it with
`@deprecated`
Enforce consistent terminology (defined in
`gen_help_html.lua:spell_dict`) for common misspellings.
This does not spellcheck English in general (perhaps a future TODO,
though it may be noisy).
- quickstart
- mark lsp.txt as `new_layout`
- remove lsp-handler documentation for notifications: they don't have
handlers because they don't have server responses.
Problem:
Since #23925, Version.build may be vim.NIL, which causes tostring() to fail:
E5108: Error executing lua E5114: Error while converting print argument #1: …/version.lua:129:
attempt to concatenate field 'build' (a userdata value)
stack traceback:
[C]: in function 'print'
[string ":lua"]:1: in main chunk
Solution:
Handle vim.NIL in Version:__tostring().
Problem:
- `vim.json` exposes various global options which:
- affect all Nvim Lua plugins (especially the LSP client)
- are undocumented and untested
- can cause confusing problems such as: cc76ae3abe
- `vim.json` exposes redundant mechanisms:
- `vim.json.null` is redundant with `vim.NIL`.
- `array_mt` is redundant because Nvim uses a metatable
(`vim.empty_dict()`) for empty dict instead, which `vim.json` is
configured to use by default (see `as_empty_dict`).
Example:
```
:lua vim.print(vim.json.decode('{"bar":[],"foo":{}}'))
--> { bar = {}, foo = vim.empty_dict() }
```
Thus we don't need to also decorate empty arrays with `array_mt`.
Solution:
Remove the functions from the public vim.json interface.
Comment-out the implementation code to minimize drift from upstream.
TODO:
- Expose the options as arguments to `vim.json.new()`
Problem:
Spacing around inlay hints has the same highlight as the hint itself.
The LSP spec for inlay hints specifically mentions the padding should not be
coloured:
/**
Render padding before the hint.
Note: Padding should use the editor's background color, not the
background color of the hint itself. That means padding can be used
to visually align/separate an inlay hint.
*/
paddingLeft?: boolean;
/**
Render padding after the hint.
Note: Padding should use the editor's background color, not the
background color of the hint itself. That means padding can be used
to visually align/separate an inlay hint.
*/
paddingRight?: boolean;
Solution:
Add the space as separate parts of the virtual text, don't add the space to the
text itself.
Option related code uses `char *` for pointer to option value, which is not the best way of representing a type-agnostic pointer.
Solution: Make pointers to option value use `void *` instead.
Add automatic refresh and a public interface on top of #23736
* add on_reload, on_detach handlers in `enable()` buf_attach, and
LspDetach autocommand in case of manual detach
* unify `__buffers` and `hint_cache_by_buf`
* use callback bufnr in `on_lines` callback, bufstate: remove __index override
* move user-facing functions into vim.lsp.buf, unify enable/disable/toggle
Closes#18086
Co-authored by: zeertzjq <zeertzjq@outlook.com>
Co-authored by: Steven Todd McIntyre II <114119064+stmii@users.noreply.github.com>
Co-authored by: nobe4 <nobe4@users.noreply.github.com>
- docs: mention --luadev-mod to run with lua runtime files
When changing a lua file in the ./runtime folder, a new contributor
might expect changes to be applied to the built Neovim binary.
Problem: Current implementation of "remove trailing /" doesn't
account for the case of literal '/' as path.
Solution: Remove trailing / only if it preceded by something else.
Co-authored by: notomo <notomo.motono@gmail.com>
Problem: crypt tests hang and cause memory errors
Solution: Move variable to start of function.
438d0c5e58
N/A patches for version.c:
vim-patch:9.0.1639: build failure without the crypt feature
Problem: Build failure without the crypt feature.
Solution: Adjust #ifdefs
bc385a150f
vim-patch:9.0.1640: compiler warning for unused variables without crypt feature
Problem: Compiler warning for unused variables without the crypt feature.
Solution: Adjust #ifdefs
7f29122c8c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Previously, filtering code actions with the "only" option failed
if the code action kind contained special Lua pattern chars such as "-"
(e.g. the ocaml language server supports a "type-annotate" code action).
Solution: use string comparison instead of string.find
Problem: Compiler warning for uninitialized variable.
Solution: Move the variable to an inner block and initialize it. (Christian
Brabandt, closesvim/vim#12549)
54f50cbf6a
The "eof" variable is not present in Nvim because it is only used by
FEAT_CRYPT.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Error message is cleared when removing mode message.
Solution: Also reset flags when the message is further down.
da51ad51bf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Message is cleared when removing mode message (Gary Johnson).
Solution: Do not clear the command line after displaying a message.
800cdbb7ca
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Expanding a pattern interferes with command line completion.
Solution: Set the file index only when appropriate. (closesvim/vim#12519)
094dd152fe
Problem: Having utf16idx() rounding up is inconvenient.
Solution: Make utf16idx() round down. (Yegappan Lakshmanan, closesvim/vim#12523)
95707037af
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem:
Since TUI was moved to another process 2448816956
v:argv and v:progname don't report the original argv[0].
["/usr/bin/nvim", "--embed", ...]
Solution:
Use argv[0] instead of VV_PROGPATH in ui_client_start_server().
Fix#23953
`nvim_cmd` shows multiple errors when attempting to edit another buffer
through a command when `curbuf->b_ro_locked` is set. This PR fixes that
by removing a redundant error in `execute_cmd`.
Problem: Vim9: not enough test coverage for executing :def function.
Solution: Add a few more tests. Fix inconsistencies.
6b8c7ba062
Cherry-pick a blank line in test_listdict.vim from patch 8.2.3842.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no type check when assigning a list range. (Naohiro Ono)
Solution: Check the member type. (closesvim/vim#8750)
89071cb6a1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests.
Solution: Run more existing tests for Vim9 script.
700e6b1662
Cherry-pick test_listdict.vim change from patch 8.2.3854.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests.
Solution: Also run existing tests for Vim9 script. Make errors more
consistent.
f47c5a8e2d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests run with Vim9.
Solution: Run a few more tests in Vim9 script and :def function. Fix that
items(), keys() and values9) return zero for a NULL dict.
Make join() return an empty string for a NULL list. Make sort()
return an empty list for a NULL list.
ef98257593
Skip f_reverse() change for consistency with other functions.
Skip Test_null_list() and Test_null_dict() because of missing patches.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: tests are only executed for legacy script.
Solution: Run more tests also for Vim9 script. Fix uncovered problems.
5dd839ce20
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough code is tested.
Solution: Use CheckLegacyAndVim9Success() in more places. Fix uncovered
problems.
63cb6567f0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Adjust relevant Lua tests. Refactor testing logic for tv_get_string_*
functions into test_string_fn().
Note that vim_snprintf(), which is used for stringifying floats, always
calls xfree(tofree), even if tofree is NULL, so we need to expect that
in the alloc log.
Problem: Tests failing because there is no error for float to string
conversion.
Solution: Change the check for failure to check for correct result. Make
some conversions strict in Vim9 script.
3cfa5b16b0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Substitute() accepts a number but not a float expression.
Solution: Also accept a float. (closesvim/vim#8331)
7a2217bedd
Vim9script is N/A. No need to port the strict argument and
tv_get_string_buf_chk_strict(), as it's only used for Vim9script.
Like the patch, use vim_snprintf over snprintf, as the "%g" specifier in
snprintf removes the ".0" from integer floats.
This means similiar to numbers, floats are (mostly) convertable to
strings.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No longer get an error for string concatenation with float.
(Tsuyoshi Cho)
Solution: Only convert float for Vim9 script. (closesvim/vim#6787)
2e0866128b
Vim9script is N/A.
Required for v8.2.2949.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem:
Nvim version string typically has a "build" component
but vim.version() doesn't report it.
Solution:
Add the "build" field to vim.version().
Closes#23863
Update runtime files
10e8ff9b26
Also:
- fix a missing `<` in builtin.txt.
- edit `:function` `{name}` wording to match the change made for the docs above
by Justin in #10619.
- link to `*vimrc*` rather than `*init.vim*` in repeat.txt change (as `init.lua`
may also be used).
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Visual area not shown when using 'showbreak' and start of line is
not visible. (Jaehwang Jung)
Solution: Adjust "fromcol" for the space taken by 'showbreak'.
(closesvim/vim#12514)
f578ca2c8f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: FILETYPE_FILE is defined to the same value multiple times. Same
for a few similar macros.
Solution: Define FILETYPE_FILE and others in feature.h only
c81dfaa69c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: charidx() and utf16idx() result is not consistent with byteidx().
Solution: When the index is equal to the length of the text return the
lenght of the text instead of -1. (Yegappan Lakshmanan,
closesvim/vim#12503)
577922b917
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
`client.messages` could grow unbounded because the default handler only
added new messages, never removing them.
A user either had to consume the messages by calling
`vim.lsp.util.get_progress_messages` or by manually removing them from
`client.messages.progress`. If they didn't do that, using LSP
effectively leaked memory.
To fix this, this deprecates the `messages` property and instead adds a
`progress` ring buffer that only keeps at most 50 messages. In addition
it deprecates `vim.lsp.util.get_progress_messages` in favour of a new
`vim.lsp.status()` and also promotes the `LspProgressUpdate` user
autocmd to a regular autocmd to allow users to pattern match on the
progress kind.
Also closes https://github.com/neovim/neovim/pull/20327
Problem: Nix files are not recognized from the hashbang line.
Solution: Add a hashbang check. (issue vim/vim#12507)
19548c6a74
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Trace32 files are not recognized.
Solution: Add patterns for the t32 filetype. (Christoph Sax, closesvim/vim#12505)
7fbcee6f92
Co-authored-by: Christoph Sax <christoph.sax@mailbox.org>
Problem: Quickfix text field is truncated.
Solution: Fix output of text field after pattern field in quickfix buffer.
(Shane Harper, closesvim/vim#12498)
5bf042810b
Co-authored-by: Shane Harper <shane@shaneharper.net>
feat(lua): add vim.system()
Problem:
Handling system commands in Lua is tedious and error-prone:
- vim.fn.jobstart() is vimscript and comes with all limitations attached to typval.
- vim.loop.spawn is too low level
Solution:
Add vim.system().
Partly inspired by Python's subprocess module
Does not expose any libuv objects.
`option_get_valid_types()` currently uses a comma separator for
multi-type options which does not fit well with the changed error
message for invalid option value type. A slash seperator is much more
suited for its current use-case.
Removes the `getoption_T` struct and also introduces the `OptVal` struct
to unify the methods of getting/setting different option value types.
This is the first of many PRs to reduce code duplication in the Vim
option code as well as to make options easier to maintain. It also
increases the flexibility and extensibility of options. Which opens the
door for things like Array and Dictionary options.
Neovim QT was originally bundled on Windows as a response to the then
lackluster terminal options. The situation has dramatically changed,
with viable options such as Windows terminal, Alacritty and Wezterm to
name a few. The Windows build no longer needs this special treatment for
neovim to be usable.
Pros:
- Release builds will be smaller.
- Less maintenance burden.
- Clearer separation of responsibility (neovim issues go to the neovim
repo and neovim-qt issues to the neovim-qt repo).
- More consistent treatment between platforms.
Cons:
- Users who've come to expect neovim-qt to be bundled with nvim will
need to adjust and download neovim-qt from
https://github.com/equalsraf/neovim-qt instead.
- Similarly, build scripts will need to be adjusted to reflect this
change.
Closes https://github.com/neovim/neovim/issues/21209.
The options 'path', 'include', and 'define' all use C-specific default
values. This may have made sense a long time ago when Vim was mostly
used just for writing C, but this is no longer the case, and we have
ample support for filetype specific configuration. Make the default
values of these options empty and move the C-specific values into a
filetype plugin where they belong.
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem:
"playground" is new jargon that overlaps with existing concepts:
"dev" (`:help dev`) and "view" (also "scratch" `:help scratch-buffer`) .
Solution:
We should consistently use "dev" as the namespace for where "developer
tools" live. For purposes of a "throwaway sandbox object", we can use
the name "view".
- Rename `TSPlayground` => `TSView`
- Rename `playground.lua` => `dev.lua`
vim.version.range() couldn't parse them correctly.
For example, vim.version.range('<0.9.0'):has('0.9.0') returned `true`.
fix: range:has() accepts vim.version()
So that it's possible to compare a range with:
vim.version.range(spec):has(vim.version())
Problem: Text properties position wrong after shifting text.
Solution: Adjust the text properties when shifting a block of text.
(closesvim/vim#10418)
4b93674159
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: "skipcol" not reset when using multi-byte characters.
Solution: Compare with w_virtcol instead of w_cursor.col. (closesvim/vim#12457)
15d4747ffd
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Display is wrong when 'smoothscroll' is set and scrolling multiple
lines.
Solution: Redraw with UPD_NOT_VALID when "skipcol" is or was set.
(closesvim/vim#12490, closesvim/vim#12468)
d9a92dc70b
Problem: update_topline() is called twice.
Solution: Do not call update_topline() before curs_columns(). (Luuk van
Baal, closesvim/vim#12495)
5c606846b9
Problem:
Completion messages such as "scanning tags" are noisy and generally not
useful on most systems. Most users probably aren't aware that this is
configurable.
Solution:
Set `shortmess+=C`.
Problem: screenpos() returns wrong row with diff filler lines.
Solution: Only add filler lines when appropriate. Also don't add the
'smoothscroll' marker when w_skipcol is zero. (closesvim/vim#12485,
closesvim/vim#12484)
55daae3921
Problem: screenpos() does not take w_skipcol into account.
Solution: Subtract w_skipcol from column. (closesvim/vim#12486, closesvim/vim#12476)
f0e68c0e2a
PROBLEM:
Whenever any text edits are applied to the buffer, the `marks` part of those
lines will be lost. This is mostly problematic for code formatters that format
the whole buffer like `prettier`, `luafmt`, ...
When doing atomic changes inside a vim doc, vim keeps track of those changes and
can update the positions of marks accordingly, but in this case we have a whole
doc that changed. There's no simple way to update the positions of all marks
from the previous document state to the new document state.
SOLUTION:
* save marks right before `nvim_buf_set_lines` is called inside `apply_text_edits`
* check if any marks were lost after doing `nvim_buf_set_lines`
* restore those marks to the previous positions
TEST CASE:
* have a formatter enabled
* open any file
* create a couple of marks
* indent the whole file to the right
* save the file
Before this change: all marks will be removed.
After this change: they will be preserved.
Fixes#14307
Problem: Stray character is visible if 'smoothscroll' marker is displayed
on top of a double-wide character.
Solution: When overwriting a double-width character with the 'smoothscroll'
marker clear the second half. (closesvim/vim#12469)
ecb87dd7d3
Problem: Filetype detection fails for *.conf file without comments.
(Dmitrii Tcyganok)
Solution: Use "conf" filetype as a fallback for an empty .conf file.
(closesvim/vim#12487, closesvim/vim#12483)
664fd12aa2
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Cursor not adjusted when near top or bottom of window and
'splitkeep' is not "cursor".
Solution: Move boundary checks to outer cursor move functions, inner
functions should only return valid cursor positions. (Luuk van
Baal, closesvim/vim#12480)
a109f39ef5
Problem:
Selecting a search result from the Algolia Docsearch widget does not
navigate to a page anchor. The docs HTML provides `<a name=…>` anchors
_near_ the `<h1>`/`<h2>`/… headings, but Algolia Docsearch expects the
anchors to be _defined on_ the headings. That's also "semantically"
nicer. https://docsearch.algolia.com/docs/manage-your-crawls/
Solution:
Set `id` on the heading element instead of placing `<a name=…>` nearby.
related: 3913ebbfcd#23839
Problem: Cursor ends up below the window after a put.
Solution: Mark w_crow and w_botline invalid when changing the cursor line.
(closesvim/vim#12465)
8509014add
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: screenchar(), screenchars() and screenstring() do not work
properly when 'encoding' is set to a double-byte encoding.
Solution: Fix the way the bytes of the characters are obtained.
(issue vim/vim#12469)
47eec6716b
If the server sends the positionEncoding capability in its
initialization response, automatically set the client's offset_encoding
to use the value provided.
Problem: Line pointer becomes invalid when using spell checking.
Solution: Call ml_get() at the right places. (Luuk van Baal, closesvim/vim#12456)
e84c773d42
Problem: Weird use of static variables for spell checking.
Solution: Move the variables to a structure and pass them from win_update()
to win_line(). (Luuk van Baal, closesvim/vim#12448)
30805a1aba
BREAKING CHANGE: LspRequest is no longer a User autocmd but is now a
first class citizen.
LspRequest as a User autocmd had limited functionality. Namely, the only
thing you could do was use the notification to do a lookup on all the
clients' requests tables to figure out what changed.
Promoting the autocmd to a full autocmd lets us set the buffer the
request was initiated on (so people can set buffer-local autocmds for
listening to these events).
Additionally, when used from Lua, we can pass additional metadata about
the request along with the notification, including the client ID, the
request ID, and the actual request object stored on the client's
requests table. Users can now listen for these events and act on them
proactively instead of polling all of the requests tables and looking
for changes.
Problem: Incsearch not triggered when pasting clipboard register on the
command line.
Solution: Also set "literally" when using a clipboard register. (Ken Takata,
closesvim/vim#12460)
9cf6ab1332
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: Some "gomod" files are not recognized.
Solution: Check for "go.mod" file name before checking out the contents.
(Omar El Halabi, closesvim/vim#12462)
c9fbd2560f
Problem: Checking translations gives an error for using two messages with
ngettext() that differ in "%" items.
Solution: Adjust the check script to tolerate omitting one "%" item.
78ee62563e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Its usecase is too specific to warrant an option. The same effect can be
achieved by passing `-DCMAKE_C_FLAGS=-DNVIM_LOG_DEBUG` in the command
line when building neovim.
Problem: Lua ftplugins in runtime take precedence over Vimscript
ftplugins in user configs (even in `after/`).
Solution: Source ftplugins separately per directory, first Vimscript
then Lua.
- `client.dynamic_capabilities` is an object that tracks client register/unregister
- `client.supports_method` will additionally check if a dynamic capability supports the method, taking document filters into account. But only if the client enabled `dynamicRegistration` for the capability
- updated the default client capabilities to include dynamicRegistration for:
- formatting
- rangeFormatting
- hover
- codeAction
- hover
- rename
Problem: Get E304 when using 'cryptmethod' "xchacha20v2". (Steve Mynott)
Solution: Add 4th crypt method to block zero ID check. Avoid syncing a swap
file before reading the file. (closesvim/vim#12433)
3a2a60ce4a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: :stopinsert may not work in a popup close handler. (Ben Jackson)
Solution: Restore stop_insert_mode when appropriate. (closesvim/vim#12452,
closesvim/vim#12434)
a40c0bcc83
Problem: CI: indent test hangs on FreeBSD.
Solution: Set 'nomore' when running the indent tests. (Ozaki Kiichi,
closesvim/vim#12446)
9f3afe7a70
Co-authored-by: ichizok <gclient.gaap@gmail.com>
Problem: SpellCap highlight not always updated when needed.
Solution: Handle updating line below closed fold and other situations where
only part of the window is redrawn. (Luuk van Baal, closesvim/vim#12428,
closesvim/vim#12420)
2ac6497f0e
fixes#23734
Get rid of the weird attr_pri dance which always seemed like a kludge:
if (!attr_pri) {
wlv.char_attr = hl_combine_attr(wlv.char_attr, extmark_attr);
} else {
wlv.char_attr = hl_combine_attr(extmark_attr, wlv.char_attr);
}
Instead combine extmark attrs with (old-skool) syntax attrs in a consistent way and then combine that with attr_pri and the rest in an _unified_ code path
fixes#23722
Co-authored-by: luukvbaal <luukvbaal@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Bad redrawing with spell checking, using "C" and "$" in 'cpo'.
Solution: Do not redraw the next line when "$" is in 'cpo'. (closesvim/vim#11285)
f3ef026c98
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With spell checking, deleting a full stop at the end of a line
does not update SpellCap at the start of the next line.
Solution: Update the next line when characters have been deleted. Also when
using undo.
26f09ea54b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: After exiting Insert mode spelling is not checked in the next
line.
Solution: When spelling is enabled redraw the next line after exiting Insert
mode in case the spell highlight needs updating.
ee09fcc9b6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Spell checking for capital not working with trailing space.
Solution: Do not calculate cap_col at the end of the line. (Christian
Brabandt, closesvim/vim#10870, issue vim/vim#10838)
afa23d1b99
Co-authored-by: Christian Brabandt <cb@256bit.org>
It's not needed anymore as it does the exact same thing as
functionaltest. The functionaltest target will test the lua type neovim
was built with, which can be toggled with the PREFER_LUA option.
libvterm v0.3 supports reflow of terminal buffer when Nvim is resized
Since v0.3 is now a required dependency, enable it by default to find
(and fix) possible issues.
Note: Neovim's scrollback buffer does not support reflow (yet), so lines
vanishing into the buffer due to a too small window will be restored
without reflow.
Problem: "file N of M" message is not translated.
Solution: Make argument count message translatable. (closevim/vim#12429)
a8490a4952
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Adds new API helper macros `CSTR_AS_OBJ()`, `STATIC_CSTR_AS_OBJ()`, and `STATIC_CSTR_TO_OBJ()`, which cleans up a lot of the current code. These macros will also be used extensively in the upcoming option refactor PRs because then API Objects will be used to get/set options. This PR also modifies pre-existing code to use old API helper macros like `CSTR_TO_OBJ()` to make them cleaner.
This ensures that colorschemes in 'rtp' are tried before ones in 'pp',
because some colorschemes in 'pp' may not work if not added to 'rtp'.
This also match the current documentation better.
Problem: In diff mode virtual text is highlighted incorrectly. (Rick Howe)
Solution: Do not use diff attributes for virtual text. (closesvim/vim#11714)
d097af7779
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'cursorline' causes virtual text highlight to continue.
Solution: Save and restore line_attr. (closesvim/vim#11588)
6ac16f0c0f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'nowrap' virtual text "after" does not scroll left.
Solution: Skip part of the virtual text that is left of the window.
(closesvim/vim#11320) Fix going beyond the last column of the window.
cd105417a5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor in wrong position when inserting after virtual text. (Ben
Jackson)
Solution: Put the cursor after the virtual text, where the text will be
inserted. (closesvim/vim#10914)
28c9f89571
Co-authored-by: Bram Moolenaar <Bram@vim.org>
vim-patch:9.0.0193: search and match highlgith interfere with virtual text
Problem: Search and match highlgith interfere with virtual text highlight.
(Ben Jackson)
Solution: Check for match highlight after text properties. Reset and
restore search highlight when showing virtual text.
(closesvim/vim#10892)
e38fc86180
vim-patch:9.0.0452: Visual highlighting extends into virtual text prop
Problem: Visual highlighting extends into virtual text prop.
Solution: Do not highlight what isn't actually selected. Fix ordering of
stored text props.
6eda17d881
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Extra space after virtual text when 'linebreak' is set.
Solution: Do not count virtual text when getting linebreak value.
(closesvim/vim#10884)
52de3a8d39
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor position wrong with virtual text before Tab.
Solution: Use the byte length, not the cell with, to compare the column.
Correct tab size after text prop. (closesvim/vim#10866)
e428fa04a7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor position wrong with wrapping virtual text in empty line.
Solution: Adjust handling of an empty line. (closesvim/vim#10875)
49a90792d9
Co-authored-by: Bram Moolenaar <Bram@vim.org>
This also fixes insert cursor position around virtual text
vim-patch:9.0.0132: multi-byte characters in virtual text not handled correctly
Problem: Multi-byte characters in virtual text not handled correctly.
Solution: Count screen cells instead of bytes.
09ff4b54fb
vim-patch9.0.0121: cannot put virtual text after or below a line
Problem: Cannot put virtual text after or below a line.
Solution: Add "text_align" and "text_wrap" arguments.
b7963df98f
This only patches the fix, not the whole thing.
vim-patch:9.0.0067: cannot show virtual text
Problem: Cannot show virtual text.
Solution: Initial changes for virtual text support, using text properties.
7f9969c559
vim-patch:9.0.0116: virtual text not displayed if 'signcolumn' is "yes"
Problem: Virtual text not displayed if 'signcolumn' is "yes".
Solution: Set c_extra and c_final to NUL.
711483cd13
Co-authored-by: bfredl <bjorn.linse@gmail.com>
Test colors were disabled in be7290d214
due to color codes interfering with the logs. I believe the solution to
disable colors is too aggressive. Reading raw logs isn't common compared
to reading CI results from the github UI. We should optimize the most
common use case.
It is also possible to interpret the colors codes in logs from neovim
with a plugin that interprets ansi escape sequences.
`nvim_(get|set)_option_value` pick the current buffer / window by default for buffer-local/window-local (but not global-local) options. So specifying `buf = 0` or `win = 0` in opts is unnecessary for those options. This PR removes those to reduce code clutter.
Problem: Multibyte characters may be wrapped at the end of a line
when 'statuscolumn' and 'spell' are set.
Solution: Update line pointerdiff "v" before fetching the line pointer
after evaluating 'statuscolumn'.
Some LSP servers (tailwindcss, rome) are known to request registration
for `workspace/didChangeWatchedFiles` even when the corresponding client
capability does not advertise support. This change adds an extra check
in the `client/registerCapability` handler not to start a watch unless
the client capability is set appropriately.
Problem: Some tests are slow.
Solution: Make a few test cases faster.
bf63011a52
Cherry-pick related test_cmdline.vim changes from patch 9.0.0418.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'smoothscroll' cursor may move below botline.
Solution: Call redraw_later() if needed, Compute cursor row with adjusted
condition. (Luuk van Baal, closesvim/vim#12415)
d49f646bf5
Problem: Display moves up and down with 'incsearch' and 'smoothscroll'.
Solution: Do not check if w_skipcol changed. (Luuk van Baal, closesvim/vim#12410,
closesvim/vim#12409)
0222c2d103
Uncrustify is sensitive to version changes, which causes friction for
contributors that doesn't have that exact version. It's also simpler to
download and install the correct version than to have bespoke version
checking.
Having the same directory listed multiple times makes the --version
output needlessly complicated to visualize. This deduplication will only
work for cmake version 3.15 and above, which should be the majority of
neovim builds by now. For older cmake versions we default to the
previous behavior of listing duplicate include directories.
- Add bindings to Treesitter ts_parser_set_logger and ts_parser_logger
- Add logfile with path STDPATH('log')/treesitter.c
- Rework existing LanguageTree loggin to use logfile
- Begin implementing log levels for vim.g.__ts_debug
This reduces the total number of khash_t instantiations from 22 to 8.
Make the khash internal functions take the size of values as a runtime
parameter. This is abstracted with typesafe Map containers which
are still specialized for both key, value type.
Introduce `Set(key)` type for when there is no value.
Refactor shada.c to use Map/Set instead of khash directly.
This requires `map_ref` operation to be more flexible.
Return pointers to both key and value, plus an indicator for new_item.
As a bonus, `map_key` is now redundant.
Instead of Map(cstr_t, FileMarks), use a pointer map as the FileMarks struct is
humongous.
Make `event_strings` actually work like an intern pool instead of wtf it
was doing before.
Problem: Test fails because of changed error message.
Solution: Adjust the expected error message.
6b02b38ed0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Display wrong when moving cursor to above the top line and
'smoothscroll' is set.
Solution: Call adjust_skipcol() in more places and make it work better.
(Luuk van Baal, closesvim/vim#12395)
798fa76dbf
Problem: Code for handling 'switchbuf' is repeated.
Solution: Add a function to handle 'switchbuf'. (Yegappan Lakshmanan,
closesvim/vim#12397)
e42c27d9e8
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: setcharsearch() does not clear last searched char properly.
Solution: Do not accept lastc_bytelen smaller than one. (closesvim/vim#12398)
e5d91ba1de
This will allow contributors to test changes in their own fork when
pushing without needing to make a pull request. This can be useful when
wanting to test out an idea before initiating a review process.
Make the following assumptions when defining concurrency:
- Pull request will work the same.
- Pushes to the neovim repo will work the same: each unique commit will
trigger a test run that won't cancel each other.
- Pushes to forks will cancel older CI runs on the same branch, similar
to how pull requests work.
This will create duplicate CI runs when doing a pull request, one in the
neovim repo for the pull request event and one in the fork for the push
event. This is an acceptable trade as the runs in the fork doesn't count
towards the CI limit of neovim. Contributors are also free to disable
these actions in their own fork if they wish.
Problem: Position of marker for 'smoothscroll' not computed correctly.
Solution: Take 'list' and other options into account. (Luuk van Baal,
closesvim/vim#12393)
24b62ec825
Problem: Using negative array index with negative width window.
Solution: Make sure the window width does not become negative.
8279af514c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Using freed memory with cmdwin and BufEnter autocmd.
Solution: Make sure pointer to b_p_iminsert is still valid.
1c3dd8ddcb
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Reading before the start of the line.
Solution: When displaying "$" check the column is not negative.
e98c88c44c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Confusing error when using "q:" in command line window.
Solution: Check for the situation and give a better error message.
(closesvim/vim#10756)
c963ec31a0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: USD filetype is not recognized.
Solution: Add patterns for USD filetype. (Colin Kennedy, closesvim/vim#12370)
b848ce6b7e
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
- Simplify error checking when using execute_process.
- Set BUILD_SHARED_LIBS to OFF when building dependencies.
This is normally not needed, but msgpack interprets an unset
BUILD_SHARED_LIBS to build a shared library, which is the opposite of
the cmake behavior.
- Move function check_lua_module to Util.cmake.
- Remove unnecessary code.
- Make variable naming more consistent
Problem: Some commands for opening a file don't use 'switchbuf'.
Solution: Use 'switchbuf' for more commands. (Yegappan Lakshmanan,
closesvim/vim#12383, closesvim/vim#12381)
54be5fb382
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Text not scrolled when cursor moved with "g0" and "h".
Solution: Adjust w_skipcol when needed. (Luuk van Baal, closesvim/vim#12387)
8667a5678f
Problem: Display errors when making topline shorter and 'smoothscroll' is
set.
Solution: Reset w_skipcol when the topline becomes shorter than its current
value. (Luuk van Baal, closesvim/vim#12367)
5d01f86d99
Problem: Line not fully displayed if it doesn't fit in the screen.
Solution: Do not reset s_skipcol if not needed. (Luuk van Baal,
closesvim/vim#12376)
6c018680be
Cmake won't rebuild with the new URL when bumping dependency version.
This is because the old URL is still cached, and won't be removed
automatically. The workaround for using non-cached variables, but also
let users specify an alternative URL is to only set the defined
variables in deps.txt if the corresponding variable hasn't already been
set by the user from the command line.
Also apply the CMAKE_CONFIFGURE_DEPENDS property to deps.txt, as we want
cmake to rebuild when changing this file.
Problem: :wqall does not trigger ExitPre. (Bart Libert)
Solution: Move preparations for :qall to a common function. (closesvim/vim#12374)
411da64e77
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor moves to wrong line when 'foldmethod' is "diff". (Rick
Howe)
Solution: Adjust logic for scrolling. (Luuk van Baal, closesvim/vim#12364,
closesvim/vim#12218)
aa6ba308a1
Problem: 'smoothscroll' does not always work properly.
Solution: Do not reset w_skipcol after it was intentionally set. (Luuk van
Baal, closesvim/vim#12360, closesvim/vim#12199, closesvim/vim#12323)
3ce8c38915
The previous logic made it possible to install bundled luarocks, but
also use external rocks, making the luarocks installation unnecessary.
Instead, let's assume that if the user wants to use the bundled
luarocks, then they also want to use it to install necessary rocks.
Problem: Some functions give two error messages.
Solution: Do not give a second error message. (closesvim/vim#12352)
e4098457ab
It seems that tv_get_bool() is actually not exactly the same as
tv_get_number(), so change it to a function instead.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Coverity warns for using NULL pointer.
Solution: Bail out when running out of memory. Check for running over end of
a string.
54598066ca
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use special keys in <Cmd> mapping.
Solution: Do allow for special keys in <Cmd> and <ScriptCmd> mappings.
(closesvim/vim#12326)
3ab3a86481
Problem: Making a mapping work in all modes is complicated.
Solution: Add the <Cmd> special key. (Yegappan Lakshmanan, closesvim/vim#7282,
closes 4784, based on patch by Bjorn Linse)
957cf67d50
Change docs to match Vim if it's wording is better.
Change error numbers to match Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: --api-info output is binary. Not setting the mode may cause
the OS to impose unexpected eof. For Windows, it scatters extra '0d0a'
words in the output.
Solution: On Windows, set stdout to binary mode for --api-info.
Fixes#20977
Current behaviour of `:Man` is to only work with "number" sections.
This is caused by wrong assumptions about man sections naming.
Also, there was similar assumption about length of section dirs
in `paths` variable.
fixes#23485
Signed-off-by: Vadim Misbakh-Soloviov <git@mva.name>
Problem: Completion for option name includes all bool options.
Solution: Do not recognize the "noinv" prefix. Prefix "no" or "inv" when
appropriate.
048d9d2521
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Search stats not always visible when searching backwards.
Solution: Do not display the top/bot message on top of the search stats.
(Christian Brabandt, closesvim/vim#12322, closesvim/vim#12222)
34a6a3617b
Co-authored-by: Christian Brabandt <cb@256bit.org>
vim-patch:9.0.1514: test waits unnecessarily long before checking screendump
Problem: Test waits unnecessarily long before checking screendump.
Solution: Remove TermWait() call.
45fcb7928a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Lpeg requires Lua headers. Currently the include directories
for Lpeg are set only to the bundled deps folder, so if the user wants
to use system Lua/Luajit, Lpeg will not find the system headers and will
fail to build.
Solution: Add system Lua/Luajit include directories when USE_BUNDLED_LUA
and USE_BUNDLED_LUAJIT are turned off.
Fixes#23469
Problem: Text scrolls unnecessarily when splitting and 'splitkeep' is not
"cursor".
Solution: Avoid resetting w_skipcol. (Luuk van Baal, closesvim/vim#12334)
b926bf47d6
Problem: Inserting lines when scrolling with 'smoothscroll' set.
Solution: Adjust line height computation for w_skipcol. (Luuk van Baal,
closesvim/vim#12350)
c8502f9b88
Problem: Termcodes test is flaky when used over ssh with X forwarding.
Solution: Set 'mousetime' to a larger value. (Dominique Pellé, closesvim/vim#7576,
closesvim/vim#7563)
2a5c61a019
Problem: Various comment and indent flaws.
Solution: Improve comments and indenting.
88456cd3c4
Omit test_function_lists.vim change as that file is likely not
applicable to Nvim due to the existence of Nvim-only functions.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: A user command with try/catch may not catch an expression error.
Solution: When an expression fails check for following "|". (closesvim/vim#7469)
8143a53c53
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: When an expression fails getting the next command may be wrong.
Solution: Do not check for a next command after :eval fails. (closesvim/vim#7415)
d0fe620cbb
Co-authored-by: Bram Moolenaar <Bram@vim.org>
This replaces the custom `health{Error,Warning,Success}` highlight
groups with `Diagnostic{Error,Warning,Ok}`, which are defined by
default. Removes the link for `healthHelp`, which was no longer
actually used after #20879.
Problem: Assert message is confusing with boolean result. assert_inrange()
replaces message instead of adding it.
Solution: Don't put quotes around expected boolean value. Append message
for assert_inrange(). (closesvim/vim#12342, closesvim/vim#12341)
53f5e51628
Move assert_type_T to testing.c and remove ASSERT_INRANGE.
Problem: No proper test for what 9.0.0846 fixes.
Solution: Run test in a terminal so that the hit-enter prompt can show up.
(closesvim/vim#11523)
7265851b2b
Problem: Using assert_fails() may cause hit-enter prompt.
Solution: Set no_wait_return. (closesvim/vim#11522)
f220643c26
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Insufficient testing for assert and test functions.
Solution: Add a few more tests. (Yegappan Lakshmanan, closesvim/vim#11190)
e24b5e0b0f
Cherry-pick E1219 from patch 8.2.3229.
Cherry-pick test_assert.vim change from patch 9.0.0491.
Cherry-pick the whole Test_refcount() function and skip it.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Using freed memory with error in assert argument.
Solution: Make a copy of the error.
249e1b903a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
perf(lsp): load buffer contents once when processing semantic token responses
Using _get_line_byte_from_position() for each token's boundaries was a
pretty huge bottleneck, since that function would load individual buffer
lines via nvim_buf_get_lines() (plus a lot of extra overhead). So each
token caused two calls to nvim_buf_get_lines() (once for the start
position, and once for the end position).
For semantic tokens, we only attach to buffers that have already been
loaded, so we can safely just get all the lines for the entire buffer at
once, and lift the rest of the _get_line_byte_from_position()
implementation directly while bypassing the part that loads the buffer
line.
While I was looking at get_lines (used by _get_line_byte_from_position),
I noticed that we were checking for non-file URIs before we even looked
to see if we already had the buffer loaded. Moving the buffer-loaded
check to be the first thing done in get_lines() more than halved the
average time spent transforming the token list into highlight ranges vs
when it was still using _get_line_byte_from_position. I ended up
improving that loop more by not using get_lines, but figured the
performance improvement it provided was worth leaving in.
Revert the change to do_cmdline_cmd() from #5226.
This function is used in many places, so making it different from Vim
leads to small differences from Vim in the behavior of some functions
like execute() and assert_fails(). If DOCMD_VERBOSE really needs to be
removed somewhere, a do_cmdline() call without DOCMD_VERBOSE is also
shorter than a do_cmdline() call with DOCMD_VERBOSE.
Problem: Test failures because of changed error messages.
Solution: Adjust the exptected error messages.
ec89223478
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: builtin function arguments not checked at compile time.
Solution: Add more type checks. (Yegappan Lakshmanan, closesvim/vim#8539)
5b73992d8f
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Crash when using many composing characters in error message.
Solution: Use mb_cptr2char_adv() instead of mb_ptr2char_adv().
34f8117dec
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: argument types are not checked at compile time.
Solution: Add several more type checks. (Yegappan Lakshmanan, closesvim/vim#8632)
a764e73d4f
Cherry-pick test_assert.vim change from patch 8.2.3229.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Inconsistent capitalization of error messages.
Solution: Always start with a capital.
7707228aac
Most of these errors are Vim9 script only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Too much indent.
Solution: Return out early from a funtion. (Yegappan Lakshmanan,
closevim/vim#11238)
368aa69088
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: blob index and slice not implemented yet.
Solution: Implement blob index and slice.
cfc3023cb6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Using inclusive index for slice is not always desired.
Solution: Add the slice() method, which has an exclusive index. (closes
vim/vim#7408)
6601b62943
Cherry-pick a line in docs added later.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot index or slice a variable with type "any".
Solution: Add runtime index and slice.
cc673e746a
Missing changes from the last PR.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: string indexes are counted in bytes.
Solution: Use character indexes. (closesvim/vim#6574)
e3c37d8ebf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Behavior of negative index in list change changed. (Naruhiko
Nishino)
Solution: Only change it for Vim9 script. (closesvim/vim#8749)
92f05f21af
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot index or slice a variable with type "any".
Solution: Add runtime index and slice.
cc673e746a
Omit E1024 and E1062: Vim9 script only.
Omit string_slice() and char_idx2byte(): Vim9 script only.
Remove the first tv_is_luafunc() check because it always returns false.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when using ":mkspell" with an empty .dic file.
Solution: Check for an empty word tree.
6669de1b23
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Not enough characters accepted for 'spellfile'.
Solution: Add vim_is_fname_char() and use it for 'spellfile'.
bc49c5f48f
Cherry-pick related doc update from Vim runtime.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Blockedit test passes with wrong result.
Solution: Add a "vim9script" line to make indenting work.
47da934844
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Blockedit test fails because of wrong indent.
Solution: Adjust the expected text temporarily
66000ff9af
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: When setting a shell size smaller than the containing
terminal window through `:winsize` or `:set lines/columns`
the screen is not properly cleared.
Solution: Clear the tui dimensions rather than the grid dimensions.
Problem: Mouse shape test is flaky, especially on Mac OS.
Solution: Instead of starting all timers at the same time, start the next
one in the callback of the previous one. (Yee Cheng Chin,
closesvim/vim#11673) Also use "bwipe!" instead of "close!" to avoid
swap files remaining.
1881abfc34
Cherry-pick test_normal.vim changes from patch 8.2.3795.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Concealed characters do not work correctly.
Solution: Subtract boguscols instead of adding them. (closesvim/vim#11273)
7500866182
Code change is N/A as Nvim has a draw_col variable instead.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
The cmake.deps build will read this file and set the left part of the
text as the variable name and the right part as the variable value. The
benefit of doing this is that it becomes much easier to parse which
dependencies are required, as well as to bump dependencies with
scripts/bump_deps.lua.
Adjust bump_deps.lua script to work with this new format.
Problem: No test for deleting the end of a long wrapped line.
Solution: Add a test to check the right text is displayed. (Luuk van Baal,
closesvim/vim#12318)
5b10a14098
Co-authored-by: Luuk van Baal <luukvbaal@gmail.com>
Problem: Scrolling too many lines when 'wrap' and 'diff' are set.
Solution: Only scroll by screenlines for 'diff' when 'wrap' is not set.
(closesvim/vim#12211)
38d867f041
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Divide by zero with 'smoothscroll' set and a narrow window.
Solution: Bail out when the window is too narrow.
870219c58c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor positioning and display problems with 'smoothscroll' and
using "zt", "zb" or "zz".
Solution: Adjust computations and conditions. (Yee Cheng Chin,
closesvim/vim#11764)
db4d88c2ad
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'smoothscroll' skipcol may be reset unnecessarily.
Solution: Check the line does actually fit in the window.
b21b8e9ed0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: "gk" may reset skipcol when not needed.
Solution: Only reset skipcol if the cursor column is less.
1b73edd9ee
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'smoothscroll' set mouse click position may be wrong.
Solution: Adjust computations for w_skipcol. (Yee Cheng Chin, closesvim/vim#11514)
e6392b1021
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: With 'smoothscroll' cursor may end up in wrong position.
Solution: Correct the computation of screen lines. (Yee Cheng Chin,
closesvim/vim#11502)
361895d2a1
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Setting w_leftcol and handling side effects is confusing.
Solution: Use a function to set w_leftcol() and handle side effects.
0c34d56264
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor moves too far with 'smoothscroll'.
Solution: Only move as far as really needed. (Yee Cheng Chin, closesvim/vim#11504)
81ba26e9de
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: With 'smoothscroll' cursor is one screen line too far down. (Ernie
Rael)
Solution: Add a test that currently has the wrong result so that a fix can
be made. (issue vim/vim#11436)
75ac25b496
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'smoothscroll' cursor calculations wrong when 'number' is set.
Solution: Correct the code that computes the width. (closesvim/vim#11492)
01ee52bab6
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: May redraw when not needed, causing slow scrolling.
Solution: Do not redraw when w_skipcol doesn't change. When w_skipcol
changes only redraw from the top. (issue vim/vim#11559)
f32fb93e43
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'smoothscroll' typing "0" may not go to the first column.
Solution: Recompute w_cline_height when needed. Do not scroll up when it
would move the cursor.
d5337efece
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: "precedes" from 'listchars' overwritten by <<< for 'smoothscroll'.
Solution: Keep the "precedes" character.
13cdde3952
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Line number not visisble with 'smoothscroll', 'nu' and 'rnu'.
Solution: Put the ">>>" after the line number instead of on top.
eb4de62931
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'scrolloff' does not work well with 'smoothscroll'.
Solution: Make positioning the cursor a bit better. Rename functions.
c9121f798f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Breakindent test cases are commented out.
Solution: Adjust expected result to slightly different behavior. Correct
computations for cursor position.
856c5d2bc7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Wrong cursor position when using "gj" and "gk" in a long line.
Solution: Adjust computations for the cursor position and skipcol. Re-enable
tests that pass now, disable failing breakindent test.
4b6172e108
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor position invalid when scrolling with 'smoothscroll' set.
(Ernie Rael)
Solution: Add w_valid_skipcol and clear flags when it changes. Adjust
w_skipcol after moving the cursor.
2fbabd238a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'smoothscroll' and 'scrolloff' non-zero the cursor position
is not properly adjusted in a long line.
Solution: Move the cursor further up or down in the line.
118c235112
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'smoothscroll' the cursor position s not adjusted in a long
line.
Solution: Move the cursor further up or down in the line.
8cf3459878
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: "<<<" shows for 'smoothscroll' even when 'showbreak is set.
Solution: When 'showbreak' is set do not display "<<<".
0937b9fb24
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tests failing with 'breakindent', 'number' and "n" in 'cpo'.
Solution: Do count the number column in topline if 'breakindent' is set.
3725116f6e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tests failing with 'smoothscroll', 'number' and "n" in 'cpo'.
Solution: Do not count number column in topline if columns are skipped.
35b251d2c2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Breakindent test accepts wrong result.
Solution: Fix the number column and adjust the expected text.
06618f94f1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: First line not scrolled properly with 'smoothscroll' and
'scrolloff' zero and using "k".
Solution: Make sure the cursor position is visible.
46b54747c5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor line only partly shows with 'smoothscroll' and 'scrolloff'
zero.
Solution: Do not use 'smoothscroll' when adjusting the bottom of the window.
(closesvim/vim#11269)
9bab7a0243
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Negative topline using CTRL-Y with 'smoothscroll' and 'diff'.
(Ernie Rael)
Solution: Only use 'smoothscroll' when 'wrap' is set.
1a58e1d97c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'smoothscroll' not tested with 'number' and "n" in 'cpo'.
Solution: Add tests, fix uncovered problem.
b6aab8f44b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No indication when the first line is broken for 'smoothscroll'.
Solution: Show "<<<" in the first line.
406b5d89e1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: with 'smoothscroll' set CTRL-E does not work properly when
'foldmethod' is set to "indent". (Yee Cheng Chin)
Solution: Merge the code for scroling with folds and 'smoothscroll'.
(closesvim/vim#11262)
6b2d4ff714
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: CTRL-Y does not stop at line 1. (John Marriott)
Solution: Stop at line 1 when 'smoothscroll' is not set. (closesvim/vim#11261)
8df9748edb
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'smoothscroll' is not copied to a new window on :split.
Solution: Copy the option value. Add a test.
b1fd26d208
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot scroll by screen line if a line wraps.
Solution: Add the 'smoothscroll' option. Only works for CTRL-E and CTRL-Y
so far.
f6196f4244
vim-patch:9.0.0641: missing part of the new option code
Problem: Missing part of the new option code.
Solution: Add missing WV_SMS.
bbbda8fd81
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Cmake truncates the full link path to a shared library if it is missing
an SONAME in some undocumented scenarios. This causes builds in some
systems to fail if "lpeg" isn't a library on the system path.
The path of imported libraries aren't modified by cmake, so we can use
that as a workaround until a proper solution for this has been
identified.
Closes https://github.com/neovim/neovim/issues/23395.
When injections are added or removed make sure to:
- invoke 'changedtree' callbacks for when new trees are added.
- invoke 'changedtree' callbacks for when trees are invalidated
- redraw regions when languagetree children are removed
Problem: Using uninitialized memory with fuzzy matching.
Solution: Initialize the arrays used to store match positions.
caf642c25d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: The ruler percentage can't be localized.
Solution: Use a string that can be translated. (Emir Sari, closesvim/vim#12311)
971cd2b8bc
Co-authored-by: Emir SARI <emir_sari@icloud.com>
Problem: Heredoc in scripts does not accept lower case marker.
Solution: Allow lower case only in non-Vim scripts. (Ken Takata,
closesvim/vim#6019)
6ab0953fef
Problem: Heredoc for interfaces does not support "trim".
Solution: Update the script heredoc support to be same as the :let command.
(Yegappan Lakshmanan, closesvim/vim#5916)
6c2b7b8055
This will prevent situations where the linting works on CI but not
locally, at the cost of increased CI time.
Also manually ignore `runtime/vim/lua/re.lua`, as the .styluaignore
isn't respected when specifying a file instead of a directory.
Packing and unpacking return values impairs performance considerably.
In an attempt to avoid creating tables as much as possible we can
instead pass return values between functions (which does not require
knowing the number of values a function might return). This makes the
code more complex, but improves benchmark numbers non-trivially.
Problem: Test for 'toolbariconsize' may fail.
Solution: Only test 'toolbariconsize' when it is supported. (James McCoy,
closesvim/vim#12095)
db1887ce40
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: Functions without arguments are not always declared properly.
Solution: Use "(void)" instead of "()". (Yegappan Lakshmanan, closesvim/vim#12031)
a23a11b5bf
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Function for setting options not used consistently.
Solution: Use a function for 'encoding' and terminal options. (Yegappan
Lakshmanan, closesvim/vim#12099)
c727b19e9f
Problem: Still some "else if" constructs for setting options.
Solution: Add a few more functions for handling options. (Yegappan
Lakshmanan, closesvim/vim#12090)
c6ff21e876
Problem: Too many "else if" statements in handling options.
Solution: Add more functions for handling option changes. (Yegappan
Lakshmanan, closesvim/vim#12060)
5da901bb68
Problem: Too many "else if" statements to handle option values.
Solution: Add more functions to handle option value changes. (Yegappan
Lakshmanan, closesvim/vim#12058)
6d611de58c
Problem: Too many "else if" statements for handling options.
Solution: Add more functions to handle options. (Yegappan Lakshmanan,
closesvim/vim#12051)
8ad862a1f9
Problem: Handling new value of an option has a long "else if" chain.
Solution: Use a function pointer. (Yegappan Lakshmanan, closesvim/vim#12015)
af93691b53
Problem: Not all mouse codes covered by tests.
Solution: Add more tests for the mouse. (Yegappan Lakshmanan, closesvim/vim#6472)
2764d06ab7
Cherry-pick typo fixes from patch 8.2.0020.
Problem: Double and triple clicks are not tested.
Solution: Test mouse clicks to select text. (closesvim/vim#5226)
f36a2c7e60
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No test for right click extending Visual area.
Solution: Add a test. (Dominique Pelle, closesvim/vim#5018)
6aa7523b96
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No tests for dragging the mouse beyond the window.
Solution: Add a test. (Dominique Pelle, closesvim/vim#5004)
b4367b7fb6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Urxvt mouse codes are not tested.
Solution: Also set 'ttymouse' to "urxvt" in the termcodes test.
d0621d85a6
Use code from latest tests instead.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No tests for CTRL-mouse-click.
Solution: Add a few tests. (Dominique Pelle, closesvim/vim#4323)
1ee36d6ff5
Use usr_toc.txt instead of help.txt.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Middle mouse click test fails without a clipboard.
Solution: Check if the clipboard can be used. (Dominique Pelle, Christian
Brabandt) Also use WorkingClipboard() instead of checking for the
"clipboard" feature.
564344ace9
Use CheckFeature clipboard_working from latest test instead.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tests for mouse clicks are a bit flaky when run in an interactive
terminal.
Solution: Use "xterm2" instead of "xterm" for 'ttymouse' to avoid spurious
drag events.
2b00b9b0f3
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No test for mouse clicks in the fold column.
Solution: Add a test. (Dominique Pelle, closesvim/vim#4261)
696d637728
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: When mouse click tests fails value of 'ttytype' is unknown.
Solution: Add a message to the assert.
4945219b99
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No test for dragging a tab with the mouse and for creating a new
tab by double clicking in the tabline.
Solution: Add two tests. (Dominique Pelle, closesvim/vim#4258)
e3e3828f93
Set 'mousetime' to 0 instead.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No test for closing tab by click in tabline.
Solution: Add a test. Also fix that dragging window separator could fail in
a large terminal. (Dominique Pelle, closesvim/vim#4253)
39f76c6ac0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No test for mouse clicks in the terminal tabpage line.
Solution: Add a test. (Dominique Pelle, closesvim/vim#4247). Also init
TabPageIdxs[], in case it's used before a redraw.
ca57ab54d7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Termcodes test would fail in a very big terminal.
Solution: Bail out when the row is larger than what will work. (Dominique
Pelle, closesvim/vim#4246)
c8b3ddab51
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Code for modeless selection not sufficiently tested.
Solution: Add tests. Move mouse code functionality to a common script file.
(Yegappan Lakshmanan, closesvim/vim#5821)
Add some mouse.vim functions that can be made to work in Nvim.
515545e11f
Problem: Crash when recovering from corrupted swap file.
Solution: Bail out when the line index looks wrong. (closesvim/vim#12276)
bf1b713202
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Popup menu position wrong in window with toolbar.
Solution: Take the window toolbar into account when positioning the popup
menu. (closesvim/vim#12308)
4e1ca0d9a6
Fixed in the previous commit. Test only.
Instead of nested linked lists, store autocommands in a flat, contiguous
kvec_t, with one kvec_t per event type. Previously patterns were stored
in each node of the outer linked list, so they can be matched only once
on repeating patterns. They are now reference counted and referenced in
each autocommand, and matching is skipped if the pattern repeats. Speeds
up creation and deletion, execution is not affected.
Co-authored-by: ii14 <ii14@users.noreply.github.com>
fix(extmarks): disallow removing extmarks in on_lines callbacks
decor_redraw_start (which runs before decor_providers_invoke_lines) gets
references for the extmarks on a specific line. If these extmarks are
deleted in on_lines callbacks then this results in a heap-use-after-free
error.
Fixes#22801
Problem: Using uninitialized memory when argument is missing.
Solution: Check there are sufficient arguments before the base.
(closesvim/vim#12302)
b7f2270bab
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Cirrus ci automatically pushes/caches docker images, which makes
containerization much simpler to handle. Moving this job to cirrus ci
shortens the job by a minute, and reduces github actions CI usage by two
minutes per PR.
Problem: The ModeChanged event may be triggered too often.
Solution: Only trigger ModeChanged when no operator is pending.
(closesvim/vim#12298)
73916bac5a
Problem: no functions for converting from/to UTF-16 index.
Solution: Add UTF-16 flag to existing funtions and add strutf16len() and
utf16idx(). (Yegappan Lakshmanan, closesvim/vim#12216)
67672ef097
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Behavior of exists() in a :def function is unpredictable.
Solution: Add exists_compiled().
267359902c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Here's the headline: when run in sync mode (last argument cb=NULL),
these functions don't actually use the uv_loop_t.
An earlier version of this patch instead replaced fs_loop with
using main_loop.uv on the main thread and luv_loop() on luv worker
threads. However this made the code more complicated for no reason.
Also arbitrarily, half of these functions would attempt to handle
UV_ENOMEM by try_to_free_memory(). This would mostly happen
on windows because it needs to allocate a converted WCHAR buffer.
This should be a quite rare situation. Your system is pretty
much hosed already if you cannot allocate like 50 WCHAR:s.
Therefore, take the liberty of simply removing this fallback.
In addition, we tried to "recover" from ENOMEM in read()/readv()
this way which doesn't make any sense. The read buffer(s) are already
allocated at this point.
This would also be an issue when using these functions on a worker
thread, as try_to_free_memory() is not thread-safe. Currently
os_file_is_readable() and os_is_dir() is used by worker threads
(as part of nvim__get_runtime(), to implement require from 'rtp' in
threads).
In the end, these changes makes _all_ os/fs.c functions thread-safe,
and we thus don't need to document and maintain a thread-safe subset.
Problem: Functions for string manipulation are spread out.
Solution: Move string related functions to a new source file. (Yegappan
Lakshmanan, closesvim/vim#8470)
a2438132a6
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Error message for wrong argument type is not specific.
Solution: Include more information in the error. (Yegappan Lakshmanan,
closesvim/vim#11037)
8deb2b30c7
Skip reduce() and deepcopy() changes because of missing patches.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Using freed memory when executing delfunc at the more prompt.
Solution: Check function list not changed in another place. (closesvim/vim#11437)
398a26f7fc
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: timer_info() has the wrong repeat value in a timer callback.
Solution: Do not add one to the repeat value when in the callback.
(closesvim/vim#9294)
95b2dd0c00
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Checks for Dictionary argument often give a vague error message.
Solution: Give a useful error message. (Yegappan Lakshmanan, closesvim/vim#11009)
04c4c5746e
Cherry-pick removal of E922 from docs from patch 9.0.1403.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: The 'statusline'-format ui elements do not receive right
click events when "mousemodel" is "popup*"
Solution: Do not draw popupmenu and handle click event instead.
Previously, there were three low-level delay entry points
- os_delay(ms, ignoreinput=true): sleep for ms, only break on got_int
- os_delay(ms, ignoreinput=false): sleep for ms, break on any key input
os_microdelay(us, false): equivalent, but in μs (not directly called)
- os_microdelay(us, true): sleep for μs, never break.
The implementation of the latter two both used uv_cond_timedwait()
This could have been for two reasons:
1. allow another thread to "interrupt" the wait
2. uv_cond_timedwait() has higher resolution than uv_sleep()
However we (1) never used the first, even when TUI was a thread, and
(2) nowhere in the codebase are we using μs resolution, it is always a ms
multiplied with 1000.
In addition, os_delay(ms, false) would completely block the thread for
100ms intervals and in between check for input. This is not how event handling
is done alound here.
Therefore:
Replace the implementation of os_delay(ms, false) to use
LOOP_PROCESS_EVENTS_UNTIL which does a proper epoll wait with a timeout,
instead of the 100ms timer panic.
Replace os_microdelay(us, false) with a direct wrapper of uv_sleep.
Problem: 'statuscolumn' width may be reset after it has been drawn
when multiple windows contain the same buffer. This results
in an offset for the drawn cursor position.
Solution: Loop over all windows (twice) prior to drawing them to
reset the 'statuscolumn' width and validate the sign
column when necessary.
`cmake --preset ci`
is equivalent to
`cmake -B build -G Ninja -D CI_BUILD=ON`
Also remove build presets as they're not very useful without workflow
presets, which are only available in schema versions 6 and above.
Problem: Small source file problems; outdated list of distributed files.
Solution: Small updates to source files and list of distributed files.
f39d9e9dca
Co-authored-by: Bram Moolenaar <Bram@vim.org>
The shipped versions of xdiff already does everything diff does, so this
duplication of tools isn't necessary. Furthermore, this setup is more
consistent overall, as the 'diffopt=external' option should be for
external programs rather than programs we bundle neovim with.
Install diffutils for oldtests in CI to avoid needing to modify tests.
Problem: Lines put in non-current window are not displayed. (Marius
Gedminas)
Solution: Don't increment the topline when inserting just above it.
(closesvim/vim#12212)
e7f05a8780
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Team reviewers is a nice feature that comes with a severe drawback: it
makes testing the workflows incredibly difficult as they won't work
without a similar token by the tester.
Problem: Tee-Object does not create a file if it does not receive input
for example when :grep does not find matches.
and so nvim tries to open a nonexistent errorfile causing an error.
Solution: use tee.exe instead of Tee-Object
Problem: Coverity warns for using a NULL pointer.
Solution: Use "empty_option" instead of NULL.
339e114d70
N/A patches for version.c:
vim-patch:9.0.1405: missing check for out-of-memory
Problem: Missing check for out-of-memory.
Solution: Check for alloc() returning NULL pointer. (closesvim/vim#12149)
14338024c1
Problem: The code for setting options is too complicated.
Solution: Refactor the code for setting options. (Yegappan Lakshmanan,
closesvim/vim#11989)
1a6476428f
This is a more robust method for tagging a packed table as it completely
eliminates the possibility of mistaking an actual table key as the
packed table tag.
This will add all interface include directories property from all
targets to main_lib. This may not be universally wanted, in which case
we can revisit/rework it.
Closes https://github.com/neovim/neovim/issues/23237.
- There is no "resource leak".
- "return 0" is definitely not the correct behavior if we ever occur a
platform where this would fail.
- There was no problem here to fix. so let's not "fix" it.
- once CI is upgraded to gcc 13, we'll figure out the correct way to make
it shut the fuck up. warnings on non-ci platforms are not critical.
This one generates a runtime/ file instead of a source file.
But otherwise it works the same like all other generators.
It has the same prerequisites (shared and mpack modules, etc), and,
importantly, it uses results from the source generators.
The odd location makes it easy to overlook when refactoring generators
(like I did last time, lol)
Problem: The set_bool_option() function is too long.
Solution: Move code to separate functions. (Yegappan Lakshmanan,
closesvim/vim#11964)
80b817b749
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem:
`vim.split('a:::', ':', {trimempty=true})` trims inner empty items.
Regression from 9c49c10470
Solution:
Set `empty_start=false` when first non-empty item is found.
close#23212
gsrc/nvim/ui_client.c: In function ‘ui_client_start_server’:
gsrc/nvim/ui_client.c:68:5: warning: ignoring return value of ‘dup’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
68 | dup(stderr_isatty ? STDERR_FILENO : STDOUT_FILENO);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/string.h:535,
from gsrc/nvim/statusline.c:10:
In function ‘strcat’,
inlined from ‘build_stl_str_hl’ at gsrc/nvim/statusline.c:1688:9:
/usr/include/bits/string_fortified.h:130:10: warning: ‘p’ may be used uninitialized [-Wmaybe-uninitialized]
130 | return __builtin___strcat_chk (__dest, __src, __glibc_objsize (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gsrc/nvim/linematch.c: In function ‘try_possible_paths’:
gsrc/nvim/linematch.c:204:35: warning: ‘from_vals’ may be used uninitialized [-Wmaybe-uninitialized]
204 | size_t unwrapped_idx_from = unwrap_indexes(from_vals, diff_len, ndiffs);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘cmdpreview_open_win’,
inlined from ‘cmdpreview_may_show’ at gsrc/nvim/ex_getln.c:2487:28:
gsrc/nvim/ex_getln.c:2251:16: warning: ‘cmdpreview_buf’ may be used uninitialized [-Wmaybe-uninitialized]
2251 | int result = do_buffer(DOBUF_GOTO, DOBUF_FIRST, FORWARD, cmdpreview_buf->handle, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/string.h:535,
from gsrc/nvim/eval/userfunc.c:11:
In function ‘strcpy’,
inlined from ‘cat_func_name’ at gsrc/nvim/eval/userfunc.c:662:5,
inlined from ‘get_user_func_name’ at gsrc/nvim/eval/userfunc.c:2854:5:
/usr/include/bits/string_fortified.h:79:10: warning: ‘__builtin___strcpy_chk’ offset 0 from the object at ‘<unknown>’ is out of the bounds of referenced subobject ‘uf_name’ with ty
pe ‘char[]’ at offset 0 [-Warray-bounds=]
79 | return __builtin___strcpy_chk (__dest, __src, __glibc_objsize (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from gsrc/nvim/eval/typval.h:10,
from gsrc/nvim/buffer_defs.h:20,
from gsrc/nvim/autocmd.h:8,
from gsrc/nvim/eval/userfunc.c:15:
gsrc/nvim/eval/typval_defs.h: In function ‘get_user_func_name’:
gsrc/nvim/eval/typval_defs.h:342:8: note: subobject ‘uf_name’ declared here
342 | char uf_name[]; ///< Name of function (actual size equals name);
| ^~~~~~~
src/nvim/drawline.c: In function ‘win_line’:
src/nvim/drawline.c:1418:16: warning: ‘charsize’ may be used uninitialized [-Wmaybe-uninitialized]
1418 | wlv.vcol -= charsize;
| ^~
src/nvim/drawline.c: In function ‘draw_virt_text’:
src/nvim/drawline.c:298:28: warning: ‘col’ may be used uninitialized [-Wmaybe-uninitialized]
298 | state->eol_col = col + 1;
| ~~~~^~~
gsrc/nvim/api/vim.c: In function ‘nvim_eval_statusline’:
gsrc/nvim/api/vim.c:2268:55: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-tru
ncation=]
2268 | snprintf(user_group, sizeof(user_group), "User%d", sp->userhl);
| ^~
gsrc/nvim/api/vim.c:2268:50: note: directive argument in the range [1, 2147483647]
2268 | snprintf(user_group, sizeof(user_group), "User%d", sp->userhl);
| ^~~~~~~~
In file included from /usr/include/stdio.h:906,
from gsrc/nvim/api/vim.c:9:
In function ‘snprintf’,
inlined from ‘nvim_eval_statusline’ at gsrc/nvim/api/vim.c:2268:9:
/usr/include/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 6 and 15 bytes into a destination of size 6
54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
55 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
56 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
Problem: ":drop fname" may change the last used tab page.
Solution: Restore the last used tab page when :drop has changed it.
(closesvim/vim#12087)
8281a16efc
Co-authored-by: Bram Moolenaar <Bram@vim.org>
fix(treesitter playground): wrong range of a node displayed in playground
The call parameters order of the function `get_range_str` is flipped for the last two arguments compared to the declaration.
Problem: Profile completion test sometimes fails.
Solution: Delete the .res file before running tests.
7e0be3ea21
Co-authored-by: Bram Moolenaar <Bram@vim.org>
problem: breakcheck might run arbitrary lua code, which might require
modules and thus invoke runtime path calculation recursively.
solution: Block the use of breakcheck when expanding glob patterns
inside 'runtimepath'
fixes#23012
Problem: Deferred functions invoked in unexpected order when using :qa and
autocommands.
Solution: Call deferred functions for the current funccal before using the
stack. (closesvim/vim#12278)
1be4b81bfb
This was originally meant as a convenience but prevents possible
functionality. For example:
-- Get the keys of the table with even values
local t = { a = 1, b = 2, c = 3, d = 4 }
vim.iter(t):map(function(k, v)
if v % 2 == 0 then return k end
end):totable()
The example above would not work, because the map() function returns
only a single value, and cannot be converted back into a table (there
are many such examples like this).
Instead, to convert an iterator into a map-like table, users can use
fold():
vim.iter(t):fold({}, function(t, k, v)
t[k] = v
return t
end)
If pack() is called with a single value, it does not create a table; it
simply returns the value it is passed. When unpack is called with a
table argument, it interprets that table as a list of values that were
packed together into a table.
This causes a problem when the single value being packed is _itself_ a
table. pack() will not place it into another table, but unpack() sees
the table argument and tries to unpack it.
To fix this, we add a simple "tag" to packed table values so that
unpack() only attempts to unpack tables that have this tag. Other tables
are left alone. The tag is simply the length of the table.
Problem: Jenkinsfiles are not recognized as groovy.
Solution: Add a pattern for Jenkinsfiles. (closesvim/vim#12236)
142ffb024d
Co-authored-by: dundargoc <gocdundar@gmail.com>
Problem: Reporting swap file when windows are split.
Solution: Close extra windows after running a test.
e5eae82bb7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tests call GetSwapFileList() before it is defined.
Solution: Move the call to after defining the function. (Christopher
Plewright)
6572a90287
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tests may get stuck in buffer with swap file.
Solution: Bail out when bwipe! doesn't get another buffer.
fa2533c8bb
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Stray warnings for existing swap files.
Solution: Wipe out the buffer until it has no name and no swap file.
23526d2539
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for catch after interrupt is flaky on MS-Windows.
Solution: Mark the test as flaky.
72b5b0d51a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for swapfilelist() fails on MS-Windows.
Solution: Only check the tail of the path. Mark a test as flaky.
6cf3151f0e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: There is no way to get a list of swap file names.
Solution: Add the swapfilelist() function. Use it in the test script to
clean up. Remove deleting individual swap files.
c216a7a21a
vim-patch:9.0.1005: a failed test may leave a swap file behind
Problem: A failed test may leave a swap file behind.
Solution: Delete the swap file to avoid another test to fail. Use another
file name.
d0f8d39d20
Cherry-pick test_window_cmd.vim changes from patch 8.2.1593.
Remove FUNC_ATTR_UNUSED from eval functions as fptr is always unused.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: When a test gets stuck it just hangs forever.
Solution: Set a timeout of 30 seconds.
3bcd0ddc2d
Note: This doesn't cause test_timers.vim failures in Nvim because there
is a SetUp() function that calls timer_stopall().
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Elapsed time since testing started is not visible.
Solution: Show the elapsed time while running tests.
b9093d5009
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: When a test is slow and CI times out there is no time info.
Solution: Add the elapsed time to the "Executing" message.
daaa3d9965
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Terminal test sometimes hangs.
Solution: Add a bit more information to the test output. (issue vim/vim#11179)
a22c56a59a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: MS-Windows: "%T" time format does not appear to work.
Solution: Use "%H:%M:%S" instead.
5fbbec180b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: A failing flaky test doesn't mention the time.
Solution: Add the time for debugging. Improve error message.
06d32a0c17
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Recursively calling :defer function if it does :qa in a compiled
function.
Solution: Clear the defer entry before calling the function. (closesvim/vim#12271)
a1f2b5ddc6
Problem: Recursively calling :defer function if it does :qa.
Solution: Clear the defer entry before calling the function. (closesvim/vim#12266)
42994bf678
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when using "!!" without a previous shell command.
Solution: Check "prevcmd" is not NULL. (closesvim/vim#11487)
6600447c7b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: ":!" doesn't do anything but does update the previous command.
Solution: Do not have ":!" change the previous command. (Martin Tournoij,
closesvim/vim#11372)
8107a2a8af
Co-authored-by: Bram Moolenaar <Bram@vim.org>
vim.iter wraps a table or iterator function into an `Iter` object with
methods such as `filter`, `map`, and `fold` which can be chained to
produce iterator pipelines that do not create new tables at each step.
Problem: After neovim/neovim@846a056, only the ruler for current floating or
last window without a statusline is drawn in the cmdline. This means that if the
current window is not one of these, but has no statusline, its ruler will not be
drawn anymore.
Solution: Make `showmode()` draw the ruler of the current window or the last
window in the cmdline if it has no statusline. This also maintains the
previously restored floating window case (`float->w_status_height` should be 0).
This behaviour should again match Vim, but without the overdraw it seems to do
to achieve the same effect; it calls `showmode()` to draw the ruler for the last
window without a statusline, then may draw over it in `showruler()` (which is
now `show_cursor_info_later()` in Nvim) to show the ruler for the current
window..? It's very confusing.
Also update the logic in `win_redr_ruler()` to mirror the check done in
`showmode()`, so that the ruler doesn't potentially draw over the long
ins-completion mode message in some cases.
Problem: Ruler not drawn correctly when using 'rulerformat'.
Solution: Adjust formatting depending on whether the ruler is drawn in the
statusline or the command line. (Sean Dewar, closesvim/vim#12246)
fc8a601c32
This issue was made apparent after neovim/neovim@0f1e2b6, as `showmode()` calls
`win_redr_ruler()` with `curwin` now if it's floating, rather than the last
window if there's no statusline (which usually already shares its right side
with that of the editor).
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
- vim.diagnostic.config() now accepts a function for the virtual_text.prefix
option, which allows for rendering e.g., diagnostic severities differently.
Problem: Cannot use an import in the "expr" part of 'spellsuggest'.
Solution: Set the script context when evaluating "expr" of 'spellsuggest'.
2a7aa83458
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use an import in 'charconvert'.
Solution: Set the script context when evaluating 'charconvert'. Also expand
script-local functions in 'charconvert'.
f4e88f2152
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use an import in 'patchexpr'.
Solution: Set the script context when evaluating 'patchexpr'. Do not
require 'patchexpr' to return a bool, it was ignored anyway.
36c2add7f8
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use an import in 'indentexpr'.
Solution: Set the script context when evaluating 'indentexpr'
28e60cc088
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use an import in 'includeexpr'.
Solution: Set the script context when evaluating 'includeexpr'
47bcc5f4c8
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use an import in 'formatexpr'.
Solution: Set the script context when evaluating 'formatexpr'.
3ba685eeef
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot use an import in 'diffexpr'.
Solution: Set the script context when evaluating 'diffexpr'. Do not require
'diffexpr' to return a bool, it was ignored anyway.
7b29f6a394
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'balloonexpr' is evaluated in the current script context.
Solution: Use the script context where the option was set.
5600a709f4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'foldtext' is evaluated in the current script context.
Solution: Use the script context where the option was set.
9530b580a7
Script version is N/A.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: find_file_in_path() is not reentrant.
Solution: Instead of global variables pass pointers to the functions.
(closesvim/vim#12093)
5145c9a829
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: The :defer command does not check the function argument count and
types.
Solution: Check the function arguments when adding a deferred function.
169003289f
Cherry-pick check_internal_func() from Vim, but use EvalFuncDef pointer
as first argument.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Deferred functions not invoked when partial func exits.
Solution: Create a funccall_T when calling a :def function.
9667b2c888
The remove_funccal() function is currently unused, but it will be used
in patch 9.0.0618.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: number of arguments is not always checked. (Yegappan
Lakshmanan)
Solution: Check number of arguments when calling function by name.
5082471f91
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Invalid memory access with bad 'statusline' value.
Solution: Avoid going over the NUL at the end.
7b17eb4b06
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Invalid memory access with recursive substitute expression.
Solution: Check the return value of vim_regsub().
3ac1d97a1d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
shell_error is a function, the code missed parentheses
The actual module for perl module version is App::cpanminus::script, not
App::cpanminus::fatscript.
Problem: Vim9: exception in ISN_INSTR caught at wrong level.
Solution: Set the starting trylevel in exec_instructions(). (closesvim/vim#8214)
ff65288aa8
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Invalid memory access in substitute with function that goes to
another file.
Solution: Check for text locked in CTRL-W gf.
cc762a48d4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: C++ 20 modules are not recognized.
Solution: Add patterns to recognize C++ 20 modules as "cpp". (Ben Jackson,
closesvim/vim#12261)
732d69e191
Co-authored-by: Ben Jackson <puremourning@gmail.com>
Problem: Members of funccall_T are inconsistently named.
Solution: Use the "fc_" prefix for all members.
ca16c60f33
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Code for making 'shortmess' temporarily empty is repeated.
Solution: Add functions for making 'shortmess' empty and restoring it.
(Christian Brabandt, closesvim/vim#11709)
9aee8ec400
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Only created files can be cleaned up with one call.
Solution: Add flags to mkdir() to delete with a deferred function.
Expand the writefile() name to a full path to handle changing
directory.
6f14da15ac
vim-patch:8.2.3742: dec mouse test fails without gnome terminfo entry
Problem: Dec mouse test fails without gnome terminfo entry.
Solution: Check if there is a gnome entry. Also fix 'acd' test on
MS-Windows. (Dominique Pellé, closesvim/vim#9282)
f589fd3e10
Cherry-pick test_autochdir.vim changes from patch 9.0.0313.
Cherry-pick test_autocmd.vim changes from patch 9.0.0323.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: :defer not tested with exceptions and ":qa!".
Solution: Test :defer works when exceptions are thrown and when ":qa!" is
used. Invoke the deferred calls on exit.
58779858fb
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use a partial with :defer.
Solution: Add the partial arguments before the other arguments. Disallow
using a dictionary.
86d87256c4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cleaning up after writefile() is a hassle.
Solution: Add the 'D' flag to defer deleting the written file. Very useful
in tests.
806a273f3c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cleaning up afterwards can make a function messy.
Solution: Add the :defer command.
1d84f7608f
Omit EX_EXPR_ARG: Vim9 script only.
Make :def throw E319 to avoid confusing behavior.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test fails because of using Vim9 syntax in legacy function.
Solution: Add "call".
4f16e9de98
Add test_nested_function.vim changes from patches 8.{0.0141,2.1432}.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Confusing error for using a variable as a function.
Solution: If a function is not found but there is a variable, give a more
useful error. (issue vim/vim#9310)
2ef9156b42
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when using a null function reference. (Naohiro Ono)
Solution: Check for an invalid function name. (closesvim/vim#8367)
22db0d549f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when passing NULL function to reduce().
Solution: Check for NULL pointer and give an error. (Dominique Pellé,
closesvim/vim#7243)
0d90e728fe
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Memory allocation failure not tested when defining a function.
Solution: Add a test. (Yegappan Lakshmanan, closesvim/vim#10127)
7c7e19cf50
test_alloc_fail() is N/A.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
- Remove unused function argument from GetBinaryDeps
- Remove unused variable LUA_LOAD_PACKAGE_MODULE_SOURCE
- Add LUA_FS_MODULE_SOURCE as a dependency of VIM_MODULE_FILE
Problem: getscriptinfo() loops even when specific SID is given.
Solution: Only loop when needed. Give a clearer error message.
(closesvim/vim#12207)
2d68b722e3
Problem: It is not easy to get information about a script.
Solution: Make getscriptinf() return the version. When selecting a specific
script return functions and variables. (Yegappan Lakshmanan,
closesvim/vim#10991)
2f892d8663
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: getscriptinfo() does not include the version. Cannot select
entries by script name.
Solution: Add the "version" item and the "name" argument. (Yegappan
Lakshmanan, closesvim/vim#10962)
520f6ef60a
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: String interpolation fails when not evaluating.
Solution: Skip the expression when not evaluating. (closesvim/vim#10398)
70c41241c2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Interpolated string expression requires escaping.
Solution: Do not require escaping in the expression.
0abc2871c1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: String interpolation only works in heredoc.
Solution: Support interpolated strings. Use syntax for heredoc consistent
with strings, similar to C#. (closesvim/vim#10327)
2eaef106e4
Cherry-pick Test_Debugger_breakadd_expr() from Vim.
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Heredoc expression evaluated even when skipping.
Solution: Don't evaluate when "skip" is set. (closesvim/vim#10306)
05c7f5d3d0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests.
Solution: Run more expression tests also with Vim9. Fix an uncovered
problem.
fea43e44c0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot put space between function name and paren.
Solution: Allow this for backwards compatibility.
bbd3e3c357
This fixes a regression from patch 8.2.1365, which isn't ported yet.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: v_lock not set when getting value of environment variable.
Solution: Set v_lock to zero.
16e63e6d35
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Using channel or job with ":execute" has strange effects.
Solution: Give an error message for Job and Channel.
b662591e50
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Using null object with execute() has strange effects.
Solution: Give an error message ofr Job and Channel.
e2a8f0773e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Messages test fails in small version.
Solution: Only use test_null_job() when available.
da292b07af
Co-authored-by: Bram Moolenaar <Bram@vim.org>
It takes a significant amount of time to install neovim, and doubly so
on Windows, due to the sheer amount of files neovim ships with. On CI
this information may be important though, so we enable it if the
CI_ENABLE option is set to ON.
Problem: Vim9: line break in expression causes v:errmsg to be filled.
(Yegappan Lakshmanan)
Solution: Do not give an error when skipping over an expression.
5e6b9882fe
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: "exit_cb" causes Vim to exit.
Solution: Require white space after a command in Vim9 script. (closesvim/vim#7467)
Also fix that Vim9 style heredoc was not always recognized.
b5b9480ee9
Omit EX_NONWHITE_OK, E1143, E1144: Vim9 script only.
Cherry-pick test_vimscript.vim changes from patch 8.2.2141.
Cherry-pick E1145 tag from Vim runtime.
N/A patches for version.c:
vim-patch:8.2.2140: build failure with tiny features
Problem: Build failure with tiny features.
Solution: Add #ifdef.
2a3cd3af45
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Inconsistent naming of get_list_tv() and eval_dict().
Solution: Rename get_list_tv() to eval_list(). Similarly for eval_number(),
eval_string(), eval_lit_string() and a few others.
9a78e6df17
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No falsy Coalescing operator.
Solution: Add the "??" operator. Fix mistake with function argument count.
92f26c256e
Cherry-pick tv2bool() into eval/typval.c.
Cherry-pick *??* tag from Vim runtime.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
feat(lua)!: add stricter vim.tbl_islist(), rename vim.tbl_isarray()
Problem: `vim.tbl_islist` allows gaps in tables with integer keys
("arrays").
Solution: Rename `vim.tbl_islist` to `vim.tbl_isarray`, add new
`vim.tbl.islist` that checks for consecutive integer keys that start
from 1.
Problem: Vim9: line continuation in lambda doesn't always work.
Solution: Do not use a local evalarg unless there isn't one. (closesvim/vim#6439)
8af81d656a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
* feat(lua): vim.tbl_contains supports general tables and predicates
Problem: `vim.tbl_contains` only works for list-like tables (integer
keys without gaps) and primitive values (in particular, not for nested
tables).
Solution: Rename `vim.tbl_contains` to `vim.list_contains` and add new
`vim.tbl_contains` that works for general tables and optionally allows
`value` to be a predicate function that is checked for every key.
Problem: Vim9: crash when using variable in a loop at script level.
Solution: Do not clear the variable if a function was defined.
Do not create a new entry in sn_var_vals every time.
(closesvim/vim#8628)
2eb6fc3b52
Omit eval_cstack: Vim9 script only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: double quote can be a string or a comment.
Solution: Only support comments starting with # to avoid confusion.
962d721319
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: line continuation does not work in function arguments.
Solution: Pass "evalarg" to get_func_tv(). Fix seeing double quoted string
as comment.
e6b5324e3a
Omit skipwhite_and_linebreak_keep_string(): Vim9 script only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot use line break in :execute, :echomsg and :echoerr
argument.
Solution: Check for line break.
47e880d6c1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no line break allowed in a for loop.
Solution: Skip line breaks in for command.
b7a78f7a67
Omit *_break_count and skip_for_lines(): Vim9 script only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no line break allowed in a while loop.
Solution: Update stored loop lines when finding line breaks.
d5053d015a
Omit getline_peek(): Vim9 script only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no line break allowed after some operators.
Solution: Skip a line break after the operator. Add
eval_may_get_next_line() to simplify checking for a line break.
9215f01218
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no line break allowed inside a lambda.
Solution: Handle line break inside a lambda in Vim9 script.
e40fbc2ca9
Omit skip_expr_concatenate(). Apply the change to skip_expr() instead.
Omit eval_ga: Vim9 script only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: fail to check for white space in list.
Solution: Add check for white space.
e6e031739c
N/A patches for version.c:
vim-patch:8.2.1070: Vim9: leaking memory when lacking white space in dict
Problem: Vim9: leaking memory when lacking white space in dict.
Solution: Clear the typval.
ab19d495fd
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no line break allowed inside a dict.
Solution: Handle line break inside a dict in Vim9 script.
8ea9390b78
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no line break allowed inside a list.
Solution: Handle line break inside a list in Vim9 script.
7147820cb9
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no line break allowed before comperators.
Solution: Check for comperator after line break.
e6536aa766
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no line break allowed before || or &&.
Solution: Check for operator after line break.
be7ee48876
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no line break allowed inside "cond ? val1 : val2".
Solution: Check for operator after line break.
793648fb56
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: leaking memory when using continuation line.
Solution: Keep a pointer to the continuation line in evalarg_T. Centralize
checking for a next command.
b171fb1790
Omit eval_next_line(): Vim9 script only.
vim-patch:8.2.1050: missing change in struct
Problem: Missing change in struct.
Solution: Add missing change.
65a8ed37f7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: script cannot use line continuation like in a :def function.
Solution: Pass the getline function pointer to the eval() functions. Use it
for addition and multiplication operators.
5409f5d8c9
Omit source_nextline() and eval_next_non_blank(): Vim9 script only.
N/A patches for version.c:
vim-patch:8.2.1048: build failure without the eval feature
Problem: Build failure without the eval feature.
Solution: Add dummy typedef.
9d40c63c7d
vim-patch:8.2.1052: build failure with older compilers
Problem: Build failure with older compilers.
Solution: Move declaration to start of block.
7acde51832
Co-authored-by: Bram Moolenaar <Bram@vim.org>
vim-patch:8.2.0695: Vim9: cannot define a function inside a function
Problem: Vim9: cannot define a function inside a function.
Solution: Initial support for :def inside :def.
04b1269783
vim-patch:8.2.0725: Vim9: cannot call a function declared later in Vim9 script
Problem: Vim9: cannot call a function declared later in Vim9 script.
Solution: Make two passes through the script file.
09689a0284
vim-patch:8.2.0734: Vim9: leaking memory when using :finish
Problem: Vim9: leaking memory when using :finish.
Solution: Do not check for next line in third pass.
04816717df
vim-patch:8.2.0753: Vim9: expressions are evaluated in the discovery phase
Problem: Vim9: expressions are evaluated in the discovery phase.
Solution: Bail out if an expression is not a constant. Require a type for
declared constants.
32e351179e
vim-patch:8.2.0818: Vim9: using a discovery phase doesn't work well
Problem: Vim9: using a discovery phase doesn't work well.
Solution: Remove the discovery phase, instead compile a function only when
it is used. Add :defcompile to compile def functions earlier.
822ba24743
vim-patch:8.2.0819: compiler warning for unused variable
Problem: Compiler warning for unused variable.
Solution: Remove the variable.
f40e51a880
vim-patch:8.2.0822: Vim9: code left over from discovery phase
Problem: Vim9: code left over from discovery phase.
Solution: Remove the dead code.
2eec37926d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Unnecessary redrawing when 'showcmdloc' is not "last".
Solution: Redraw later when "showcmd_is_clear" is set. (Luuk van Baal,
closesvim/vim#12260)
aa7f25ebf1
The function keeps track of the previously installed rock, meaning we no
longer need to manually keep track of the dependency chain. This will
make adding or removing rocks much easier.
Problem: Crash when passing NULL to setcmdline(). (Andreas Louv)
Solution: Use tv_get_string() instead of using v_string directly.
(closesvim/vim#12231, closesvim/vim#12227)
ac6cd31afc
Problem: Estimated 'statuscolumn' width estimated is not properly used,
executing the `w_redr_statuscol` path unnecessarily.
Solution: Adjust `w_nrwidth` and 'statuscolumn' width before anything
is actually drawn in a `win_update()`.
Problem: No commentstring is set for C# buffers after removing the
default C-style commentstring
Solution: Add `ftplugin/cs.lua` with C-style commentstring
Using :CheckHealth invokes an error, and many of the features from :checkhealth
doesn't even work such as calling only a specific check. Users should use
:checkhealth instead.
Vimball is an outdated feature that is rarely used these days. It is not
a maintenance burden on its own, but it is nonetheless dead weight and
something we'd need to tell users to ignore when they inevitably ask
what it is.
See: https://github.com/neovim/neovim/pull/21369#issuecomment-1347615173
In the `test_rpc_server` procedure, both `on_setup` and `on_init`
callbacks can run concurrently in some scenarios. This caused some CI
failures in tests for the LSP set_defaults feature.
This commit attempts to fix this by merging those two callbacks in the
impacted tests.
See: https://github.com/neovim/neovim/actions/runs/4553550710/attempts/1
Problem: The 'statuscolumn' is not drawn and the line itself is drawn
at an offset to the rest of the buffer after virt_lines if
'cpoptions' includes "n".
Solution: Make sure 'statuscolumn' is drawn.
Problem: Ending Insert mode when accessing a hidden prompt buffer.
Solution: Don't stop Insert mode when it was active before. (closesvim/vim#12237)
05a627c3d4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Currently, the release build picks up headers in
`/Library/Frameworks/Mono.framework/Headers`. You can verify this by
downloading the latest nightly build and checking the output of `nvim
--version`.
These headers are likely to be from a different version of `libintl` than the
one we link to. Let's avoid usage of them by setting `CMAKE_FIND_FRAMEWORK` to
`NEVER`.
Problem: `w_scwidth` may be outdated in `nvim_eval_status()`, causing
`build_stl_str_hl()` to return an empty `%s` sign segment.
Solution: Update `w_scwidth` for `'statuscolumn'` evaluation.
The `make uninstall` target can't be expected to find all files it
installs in many cases. It is therefore better to remove it rather than give
the impression to users that it is a robust.
Due to the way neovim project is set up, running `make uninstall` would
previously build neovim in order to determine whether neovim was
installed. Instead, check if installation manifest file exists and if
not then skip building entirely.
Problem:
Job callbacks in termdebug cannot handle partial lines.
Solution:
Add a wrapper function that handles partial lines and only passes full
lines to the real callback.
Fix#22929.
Revert this change until a proper solution is implemented, such as allowing the
user to select whether to install per-user or per-machine.
Fixes https://github.com/neovim/neovim/issues/22933.
problem: can we have Serde?
solution: we have Serde at home
This by itself is just a change of notation, that could be quickly
merged to avoid messy merge conflicts, but upcoming changes are planned:
- keysets no longer need to be defined in one single file. `keysets.h` is
just the initial automatic conversion of the previous `keysets.lua`.
keysets just used in a single api/{scope}.h can be moved to that file, later on.
- Typed dicts will have more specific types than Object. this will
enable most of the existing manual typechecking boilerplate to be eliminated.
We will need some annotation for missing value, i e a boolean will
need to be represented as a TriState (none/false/true) in some cases.
- Eventually: optional parameters in form of a `Dict opts` final
parameter will get added in some form to metadata. this will require
a discussion/desicion about type forward compatibility.
The first argument which is non-nil is returned. This is useful when
using nested default values (e.g. in the EditorConfig plugin).
Before:
local enable = vim.F.if_nil(vim.b.editorconfig, vim.F.if_nil(vim.g.editorconfig, true))
After:
local enable = vim.F.if_nil(vim.b.editorconfig, vim.g.editorconfig, true)
_Before reporting:_ search [existing issues](https://github.com/neovim/neovim/issues?q=is%3Aissue+is%3Aopen+label%3Abug) and check the [FAQ](https://github.com/neovim/neovim/wiki/FAQ). Usage or "How to" questions belong on the [stackoverflow](https://vi.stackexchange.com/) and will be closed.
*Before reporting:*
- Confirm the problem is reproducible on [**master**](https://github.com/neovim/neovim/releases/nightly) or [**latest stable**](https://github.com/neovim/neovim/releases/stable) release
- Run `make distclean` when encountering build issues
- Read the [FAQ](https://neovim.io/doc/user/faq.html) and ["Reporting Problems" in CONTRIBUTING.md](https://github.com/neovim/neovim/blob/master/CONTRIBUTING.md#reporting-problems).
Usage or "How to" questions belong on [stackoverflow](https://vi.stackexchange.com/) and will be closed.
- type:textarea
- type:textarea
attributes:
attributes:
label:"Problem"
label:"Problem"
@ -19,7 +24,10 @@ body:
label:"Steps to reproduce"
label:"Steps to reproduce"
description:|
description:|
- For build failures: list the exact steps including CMake flags (if any).
- For build failures: list the exact steps including CMake flags (if any).
- If the bug pertains to crashing (or segfault), please include a [stacktrace](https://neovim.io/doc/user/dev_tools.html#dev-tools-backtrace).
- For startup or shell-related problems: try `env -i TERM=ansi-256color "$(which nvim)"`.
- For startup or shell-related problems: try `env -i TERM=ansi-256color "$(which nvim)"`.
- Use the provided [minimal reproduction template](https://github.com/neovim/neovim/blob/master/contrib/minimal.lua) to create a minimal configuration. After you fill it out with necessary information, run with `nvim --clean -u minimal.lua`.
- Please do **not** include a package manager in the reproduction steps.
Before requesting: search [existing issues](https://github.com/neovim/neovim/labels/enhancement) and check the [FAQ](https://github.com/neovim/neovim/wiki/FAQ).
Before requesting: search [existing feature requests](https://github.com/neovim/neovim/labels/enhancement) and check the [FAQ](https://neovim.io/doc/user/faq.html).
_Before reporting:_ search [existing issues](https://github.com/neovim/neovim/issues?q=is%3Aissue+is%3Aopen+label%3Abug) and check the [FAQ](https://github.com/neovim/neovim/wiki/FAQ). Usage questions or "Why isn't X language server/feature working?" belong on [stackoverflow](https://vi.stackexchange.com/) and will be closed.
_Before reporting:_ search [existing issues](https://github.com/neovim/neovim/issues?q=is%3Aissue+is%3Aopen+label%3Abug) and check the [FAQ](https://neovim.io/doc/user/faq.html). Usage questions or "Why isn't X language server/feature working?" belong on [stackoverflow](https://vi.stackexchange.com/) and will be closed.
3.Search and run `nvim-qt.exe` or run `nvim.exe` on your CLI of choice.
3.Run `nvim.exe` on your CLI of choice
### macOS
Note: On Windows "Server" you may need to [install vcruntime140.dll](https://learn.microsoft.com/en-us/cpp/windows/latest-supported-vc-redist?view=msvc-170).
1. Download **nvim-macos.tar.gz**
### macOS (x86_64)
2. Run `xattr -c ./nvim-macos.tar.gz` (to avoid "unknown developer" warning)
3. Extract: `tar xzvf nvim-macos.tar.gz`
4. Run `./nvim-macos/bin/nvim`
### Linux (x64)
1. Download **nvim-macos-x86_64.tar.gz**
2. Run `xattr -c ./nvim-macos-x86_64.tar.gz` (to avoid "unknown developer" warning)
3. Extract: `tar xzvf nvim-macos-x86_64.tar.gz`
4. Run `./nvim-macos-x86_64/bin/nvim`
### macOS (arm64)
1. Download **nvim-macos-arm64.tar.gz**
2. Run `xattr -c ./nvim-macos-arm64.tar.gz` (to avoid "unknown developer" warning)
3. Extract: `tar xzvf nvim-macos-arm64.tar.gz`
4. Run `./nvim-macos-arm64/bin/nvim`
### Linux (x86_64)
If your system does not have the [required glibc version](https://neovim.io/doc/user/support.html#supported-platforms), try the (unsupported) [builds for older glibc](https://github.com/neovim/neovim-releases).
- **IMPORTANT**: Before upgrading to a new version, **always check for [breaking changes](https://neovim.io/doc/user/news.html#news-breaking).**
## Quick start
1. Install [build prerequisites](#build-prerequisites) on your system
2.`git clone https://github.com/neovim/neovim`
3.`cd neovim`
- If you want the **stable release**, also run `git checkout stable`.
4.`make CMAKE_BUILD_TYPE=RelWithDebInfo`
- If you want to install to a custom location, set `CMAKE_INSTALL_PREFIX`. See also [INSTALL.md](./INSTALL.md#install-from-source).
- On BSD, use `gmake` instead of `make`.
- To build on Windows, see the [Building on Windows](#building-on-windows) section. _MSVC (Visual Studio) is recommended._
5.`sudo make install`
- Default install location is `/usr/local`
- On Debian/Ubuntu, instead of `sudo make install`, you can try `cd build && cpack -G DEB && sudo dpkg -i nvim-linux-<arch>.deb` (with `<arch>` either `x86_64` or `arm64`) to build DEB-package and install it. This helps ensure clean removal of installed files. Note: This is an unsupported, "best-effort" feature of the Nvim build.
**Notes**:
- From the repository's root directory, running `make` will download and build all the needed dependencies and put the `nvim` executable in `build/bin`.
- Third-party dependencies (libuv, LuaJIT, etc.) are downloaded automatically to `.deps/`. See the [FAQ](https://neovim.io/doc/user/faq.html#faq-build) if you have issues.
- After building, you can run the `nvim` executable without installing it by running `VIMRUNTIME=runtime ./build/bin/nvim`.
- If you plan to develop Neovim, install [Ninja](https://ninja-build.org/) for faster builds. It will automatically be used.
- Install [ccache](https://ccache.dev/) for faster rebuilds of Neovim. It's used by default. To disable it, use `CCACHE_DISABLE=true make`.
## Running tests
See [test/README.md](https://github.com/neovim/neovim/blob/master/test/README.md).
## Building
First make sure you installed the [build prerequisites](#build-prerequisites). Now that you have the dependencies, you can try other build targets explained below.
The _build type_ determines the level of used compiler optimizations and debug information:
-`Release`: Full compiler optimizations and no debug information. Expect the best performance from this build type. Often used by package maintainers.
-`Debug`: Full debug information; few optimizations. Use this for development to get meaningful output from debuggers like GDB or LLDB. This is the default if `CMAKE_BUILD_TYPE` is not specified.
-`RelWithDebInfo` ("Release With Debug Info"): Enables many optimizations and adds enough debug info so that when Neovim ever crashes, you can still get a backtrace.
So, for a release build, just use:
```
make CMAKE_BUILD_TYPE=Release
```
(Do not add a `-j` flag if `ninja` is installed! The build will be in parallel automatically.)
Afterwards, the `nvim` executable can be found in `build/bin`. To verify the build type after compilation, run:
```sh
./build/bin/nvim --version | grep ^Build
```
To install the executable to a certain location, use:
```
make CMAKE_INSTALL_PREFIX=$HOME/local/nvim install
```
CMake, our main build system, caches a lot of things in `build/CMakeCache.txt`. If you ever want to change `CMAKE_BUILD_TYPE` or `CMAKE_INSTALL_PREFIX`, run `rm -rf build` first. This is also required when rebuilding after a Git commit adds or removes files (including from `runtime`) — when in doubt, run `make distclean` (which is basically a shortcut for `rm -rf build .deps`).
By default (`USE_BUNDLED=1`), Neovim downloads and statically links its needed dependencies. In order to be able to use a debugger on these libraries, you might want to compile them with debug information as well:
<!-- THIS CAUSES SCREEN INTERFERENCE
```
make distclean
VERBOSE=1 DEBUG=1 make deps
```
-->
```
make distclean
make deps
```
## Building on Windows
### Windows / MSVC
**MSVC (Visual Studio) is the recommended way to build on Windows.** These steps were confirmed as of 2023.
1. Install [Visual Studio](https://visualstudio.microsoft.com/thank-you-downloading-visual-studio/?sku=Community) (2017 or later) with the _Desktop development with C++_ workload.
- On 32-bit Windows, you will need [this workaround](https://developercommunity.visualstudio.com/content/problem/212989/ninja-binary-format.html).
2. Open the Neovim project folder.
- Visual Studio should detect the cmake files and automatically start building...
3. Choose the `nvim.exe (bin\nvim.exe)` target and hit F5.
- If the build fails, it may be because Visual Studio started the build with `x64-{Debug,Release}` before you switched the configuration to `x86-Release`.
- Right-click _CMakeLists.txt → Delete Cache_.
- Right-click _CMakeLists.txt → Generate Cache_.
- If you see an "access violation" from `ntdll`, you can ignore it and continue.
4. If you see an error like `uv.dll not found`, try the `nvim.exe (Install)` target. Then switch back to `nvim.exe (bin\nvim.exe)`.
### Windows / MSVC PowerShell
To build from the command line (i.e. invoke the `cmake` commands yourself),
1. Ensure you have the Visual Studio environment variables, using any of the following:
- Using the [Visual Studio Developer Command Prompt or Visual Studio Developer PowerShell](https://learn.microsoft.com/en-us/visualstudio/ide/reference/command-prompt-powershell?view=vs-2022)
- Invoking `Import-VisualStudioVars` in PowerShell from [this PowerShell module](https://github.com/Pscx/Pscx)
- Invoking `VsDevCmd.bat` in Command Prompt
```
VsDevCmd.bat -arch=x64
```
This is to make sure that `luarocks` finds the Visual Studio installation, and doesn't fall back to MinGW with errors like:
```
'mingw32-gcc' is not recognized as an internal or external command
```
2. From the "Developer PowerShell" or "Developer Command Prompt":
Install all dependencies the normal way, then build Neovim the normal way for a random CMake application (i.e. do not use the `Makefile` that automatically downloads and builds "bundled" dependencies).
The `cygport` repo contains Cygport files (e.g. `APKBUILD`, `PKGBUILD`) for all the dependencies not available in the Cygwin distribution, and describes any special commands or arguments needed to build. The Cygport definitions also try to describe the required dependencies for each one. Unless custom commands are provided, Cygport just calls `autogen`/`cmake`, `make`, `make install`, etc. in a clean and consistent way.
https://github.com/cascent/neovim-cygwin was built on Cygwin 2.9.0. Newer `libuv` should require slightly less patching. Some SSP stuff changed in Cygwin 2.10.0, so that might change things too when building Neovim.
### Windows / MSYS2 / MinGW
1. From the MSYS2 shell, install these packages:
```
pacman -S \
mingw-w64-ucrt-x86_64-gcc \
mingw-w64-x86_64-{cmake,make,ninja,diffutils}
```
2. From the Windows Command Prompt (`cmd.exe`), set up the `PATH` and build.
```cmd
set PATH=c:\msys64\ucrt64\bin;c:\msys64\usr\bin;%PATH%
A normal build will create `.mo` files in `build/src/nvim/po`.
* If you see `msgfmt: command not found`, you need to install [`gettext`](http://en.wikipedia.org/wiki/Gettext). On most systems, the package is just called `gettext`.
### Localization check
To check the translations for `$LANG`, run `make -C build check-po-$LANG`. Examples:
```
cmake --build build --target check-po-de
cmake --build build --target check-po-pt_BR
```
- `check-po-$LANG` generates a detailed report in `./build/src/nvim/po/check-${LANG}.log`. (The report is generated by `nvim`, not by `msgfmt`.)
### Localization update
To update the `src/nvim/po/$LANG.po` file with the latest strings, run the following:
```
cmake --build build --target update-po-$LANG
```
- **Note**: Run `src/nvim/po/cleanup.vim` after updating.
## Compiler options
To see the chain of includes, use the `-H` option ([#918](https://github.com/neovim/neovim/issues/918)):
- `grep -v /usr/` is used to filter out system header files.
- `-save-temps` can be added as well to see expanded macros or commented assembly.
## Custom Makefile
You can customize the build process locally by creating a `local.mk`, which is referenced at the top of the main `Makefile`. It's listed in `.gitignore`, so it can be used across branches. **A new target in `local.mk` overrides the default make-target.**
Here's a sample `local.mk` which adds a target to force a rebuild but *does not* override the default-target:
```make
all:
rebuild:
rm -rf build
make
```
## Third-party dependencies
Reference the [Debian package](https://packages.debian.org/sid/source/neovim) (or alternatively, the [Homebrew formula](https://github.com/Homebrew/homebrew-core/blob/master/Formula/neovim.rb)) for the precise list of dependencies/versions.
- Example of using a package with all dependencies:
```
make USE_BUNDLED=OFF
```
- Example of using a package with some dependencies:
```
make BUNDLED_CMAKE_FLAG="-DUSE_BUNDLED=OFF -DUSE_BUNDLED_LUV=ON -DUSE_BUNDLED_TS=ON -DUSE_BUNDLED_LIBUV=ON"
```
## Build prerequisites
General requirements (see [#1469](https://github.com/neovim/neovim/issues/1469#issuecomment-63058312)):
- Clang or GCC version 4.9+
- CMake version 3.16+, built with TLS/SSL support
- Optional: Get the latest CMake from https://cmake.org/download/
- Provides a shell script which works on most Linux systems. After running it, ensure the resulting `cmake` binary is in your $PATH so the the Nvim build will find it.
Starting from NixOS 18.03, the Neovim binary resides in the `neovim-unwrapped` Nix package (the `neovim` package being just a wrapper to setup runtime options like Ruby/Python support):
```sh
cd path/to/neovim/src
```
Drop into `nix-shell` to pull in the Neovim dependencies:
```
nix-shell '<nixpkgs>' -A neovim-unwrapped
```
Configure and build:
```sh
rm -rf build && cmakeConfigurePhase
buildPhase
```
Tests are not available by default, because of some unfixed failures. You can enable them via adding this package in your overlay:
If you get an error regarding a `sha256sum` mismatch, where the actual SHA-256 hash is `e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855`, then this is your issue (that's the `sha256sum` of an empty file).
### OpenBSD
```sh
doas pkg_add gmake cmake curl gettext-tools
```
Build can sometimes fail when using the top level `Makefile`, apparently due to some third-party component (see [#2445-comment](https://github.com/neovim/neovim/issues/2445#issuecomment-108124236)). The following instructions use CMake:
```sh
mkdir .deps
cd .deps
cmake ../cmake.deps/
gmake
cd ..
mkdir build
cd build
cmake ..
gmake
```
### macOS
#### macOS / Homebrew
1. Install Xcode Command Line Tools: `xcode-select --install`
2. Install [Homebrew](http://brew.sh)
3. Install Neovim build dependencies:
```
brew install ninja cmake gettext curl
```
- **Note**: If you see Wget certificate errors (for older macOS versions less than 10.10):
@ -8,12 +8,11 @@ If you want to help but don't know where to start, here are some
low-risk/isolated tasks:
low-risk/isolated tasks:
- Try a [complexity:low] issue.
- Try a [complexity:low] issue.
- Fix bugs found by [Clang](#clang-scan-build), [PVS](#pvs-studio) or
- Fix bugs found by [Coverity](#coverity).
[Coverity](#coverity).
- [Improve documentation](#documenting)
- [Merge a Vim patch] (requires strong familiarity with Vim)
- [Merge a Vim patch] (requires strong familiarity with Vim)
- NOTE: read the above link before sending improvements to "runtime files" (anything in `runtime/`).
- NOTE: read the above link before sending improvements to "runtime files" (anything in `runtime/`).
- Vimscript and documentation files are (mostly) maintained by [Vim](https://github.com/vim/vim), not Nvim.
- Vimscript and documentation files are (mostly) maintained by [Vim], not Nvim.
- Nvim's [filetype detection](https://github.com/neovim/neovim/blob/master/runtime/lua/vim/filetype.lua) behavior matches Vim, so changes to filetype detection should be submitted to [Vim] first.
- Update Neovim to the latest version to see if your problem persists.
- Update Neovim to the latest version to see if your problem persists.
- Try to reproduce with `nvim --clean` ("factory defaults").
- Try to reproduce with `nvim --clean` ("factory defaults").
- If a specific configuration or plugin is necessary to recreate the problem, use the minimal template in `contrib/minimal.lua` with `nvim --clean -u contrib/minimal.lua` after making the necessary changes.
- [Bisect](https://neovim.io/doc/user/starting.html#bisect) your config: disable plugins incrementally, to narrow down the cause of the issue.
- [Bisect](https://neovim.io/doc/user/starting.html#bisect) your config: disable plugins incrementally, to narrow down the cause of the issue.
- [Bisect][git-bisect] Neovim's source code to find the cause of a regression, if you can. This is _extremely_ helpful.
- [Bisect][git-bisect] Neovim's source code to find the cause of a regression, if you can. This is _extremely_ helpful.
- When reporting a crash, [include a stacktrace](https://github.com/neovim/neovim/wiki/FAQ#backtrace-linux).
- When reporting a crash, [include a stacktrace](https://neovim.io/doc/user/dev_tools.html#dev-tools-backtrace).
- Use [ASAN/UBSAN](#clang-sanitizers-asan-and-ubsan) to get detailed errors for segfaults and undefined behavior.
- Use [ASAN/UBSAN](#sanitizers-asan-and-ubsan) to get detailed errors for segfaults and undefined behavior.
- Check the logs. `:edit $NVIM_LOG_FILE`
- Check the logs. `:edit $NVIM_LOG_FILE`
- Include `cmake --system-information` for build-related issues.
- Include `cmake --system-information` for build-related issues.
Developer guidelines
Developer guidelines
--------------------
--------------------
- Read [:help dev](https://neovim.io/doc/user/develop.html#dev) if you are working on Nvim core.
- Read [:help dev](https://neovim.io/doc/user/develop.html#dev) and [:help dev-doc][dev-doc-guide] if you are working on Nvim core.
- Read [:help dev-ui](https://neovim.io/doc/user/develop.html#dev-ui) if you are developing a UI.
- Read [:help dev-ui](https://neovim.io/doc/user/develop.html#dev-ui) if you are developing a UI.
- Read [:help dev-api-client](https://neovim.io/doc/user/develop.html#dev-api-client) if you are developing an API client.
- Read [:help dev-api-client](https://neovim.io/doc/user/develop.html#dev-api-client) if you are developing an API client.
- Install `ninja` for faster builds of Nvim.
- Install `ninja` for faster builds of Nvim.
```
```bash
sudo apt-get install ninja-build
sudo apt-get install ninja-build
make distclean
make distclean
make # Nvim build system uses ninja automatically, if available.
make # Nvim build system uses ninja automatically, if available.
```
```
- Install `ccache` for faster rebuilds of Nvim. Nvim will use it automatically
- Install `ccache` or `sccache` for faster rebuilds of Nvim. Nvim will use one
if it's found. To disable caching use:
of these automatically if it's found. To disable caching use:
```
```bash
CCACHE_DISABLE=true make
cmake -B build -D CACHE_PRG=OFF
```
```
Pull requests (PRs)
Pull requests (PRs)
@ -55,12 +55,8 @@ Pull requests (PRs)
- Your PR must include [test coverage][run-tests].
- Your PR must include [test coverage][run-tests].
- Avoid cosmetic changes to unrelated files in the same commit.
- Avoid cosmetic changes to unrelated files in the same commit.
- Use a [feature branch][git-feature-branch] instead of the master branch.
- Use a [feature branch][git-feature-branch] instead of the master branch.
- Use a _rebase workflow_ for small PRs.
- Use a _rebase workflow_ for all PRs.
- After addressing review comments, it's fine to force-push.
- After addressing review comments, it's fine to force-push.
- Use a _merge workflow_ (as opposed to "rebase") for big, high-risk PRs.
- Merge `master` into your PR when there are conflicts or when master
introduces breaking changes.
- Do not edit commits that come before the merge commit.
### Merging to master
### Merging to master
@ -87,33 +83,36 @@ a comment.
### Commit messages
### Commit messages
Follow the [conventional commits guidelines][conventional_commits] to *make reviews easier* and to make
Follow the [conventional commits guidelines][conventional_commits] to *make reviews easier* and to make
the VCS/git logs more valuable. The general structure of a commit message is:
the VCS/git logs more valuable (try `make lintcommit`). The structure of a commit message is:
```
type(scope): subject
<type>([optional scope]): <description>
[optional body]
Problem:
...
[optional footer(s)]
Solution:
```
...
- Prefix the commit subject with one of these [_types_](https://github.com/commitizen/conventional-commit-types/blob/master/index.json):
- Commit message **subject** (you can **ignore this for "fixup" commits** or any commits you expect to be squashed):
- Prefix with a [_type_](https://github.com/commitizen/conventional-commit-types/blob/master/index.json):
- You can **ignore this for "fixup" commits** or any commits you expect to be squashed.
- `build ci docs feat fix perf refactor revert test vim-patch`
- Append optional scope to _type_ such as `(lsp)`, `(treesitter)`, `(float)`, …
- Append an optional `(scope)` such as `(lsp)`, `(treesitter)`, `(float)`, …
- _Description_ shouldn't start with a capital letter or end in a period.
- Use the _imperative voice_: "Fix bug" rather than "Fixed bug" or "Fixes bug."
- Use the _imperative voice_: "Fix bug" rather than "Fixed bug" or "Fixes bug."
- Keep it short (under 72 characters).
- Try to keep the first line under 72 characters.
- Commit message **body** (detail):
- A blank line must follow the subject.
- Concisely describe the Problem/Solution in the commit **body**. [Describing the problem](https://lamport.azurewebsites.net/pubs/state-the-problem.pdf)
- Breaking API changes must be indicated by
_independently of the solution_ often leads to a better understanding for you, reviewers, and future readers.
1. "!" after the type/scope, and
```
2. a "BREAKING CHANGE" footer describing the change.
Problem:
Example:
```
refactor(provider)!: drop support for Python 2
BREAKING CHANGE: refactor to use Python 3 features since Python 2 is no longer supported.
Solution:
```
```
- Indicate breaking API changes with "!" after the type, and a "BREAKING CHANGE" footer. Example:
```
refactor(provider)!: drop support for Python 2
BREAKING CHANGE: refactor to use Python 3 features since Python 2 is no longer supported.
```
### Automated builds (CI)
### Automated builds (CI)
@ -124,48 +123,20 @@ Each pull request must pass the automated builds on [Cirrus CI] and [GitHub Acti
- If any tests fail, the build will fail. See [test/README.md#running-tests][run-tests] to run tests locally.
- If any tests fail, the build will fail. See [test/README.md#running-tests][run-tests] to run tests locally.
- CI runs [ASan] and other analyzers.
- CI runs [ASan] and other analyzers.
- To run valgrind locally: `VALGRIND=1 make test`
- To run valgrind locally: `VALGRIND=1 make test`
- To run Clang ASan/UBSan locally: `CC=clang make CMAKE_FLAGS="-DENABLE_ASAN_UBSAN=ON"`
- To run ASan/UBSan locally: `CC=clang make CMAKE_FLAGS="-DENABLE_ASAN_UBSAN=ON"`.
- The [lint](#lint) build checks modified lines _and their immediate
Note that MSVC requires Release or RelWithDebInfo build type to work properly.
neighbors_, to encourage incrementally updating the legacy style to meet our
- The [lint](#lint) build checks that the code is formatted correctly and
[style](#style). (See [#3174][3174] for background.)
passes various linter checks.
- CI for FreeBSD runs on [Cirrus CI].
- CI for FreeBSD runs on [Cirrus CI].
- To see CI results faster in your PR, you can temporarily set `TEST_FILE` in
- To see CI results faster in your PR, you can temporarily set `TEST_FILE` in
- To see which includes needs fixing use the cmake preset `iwyu`:
- To see which includes needs fixing use the cmake preset `iwyu`:
```
```bash
cmake --preset iwyu
cmake --preset iwyu
cmake --build --preset iwyu
cmake --build build
```
```
- There's also a make target that automatically fixes the suggestions from
- There's also a make target that automatically fixes the suggestions from
IWYU:
IWYU:
```
```bash
make iwyu
make iwyu
```
```
See [#549][549] for more details.
See [#549][549] for more details.
Documenting
### Lua runtime files
-----------
Many parts of the `:help` documentation are autogenerated from C or Lua docstrings using the `./scripts/gen_vimdoc.py` script.
Most of the Lua core [`runtime/`](./runtime) modules are precompiled to
You can filter the regeneration based on the target (api, lua, or lsp), or the file you changed, that need a doc refresh using `./scripts/gen_vimdoc.py -t <target>`.
bytecode, so changes to those files won't get used unless you rebuild Nvim or
by passing `--luamod-dev` and `$VIMRUNTIME`. For example, try adding a function
Lua documentation uses a subset of [EmmyLua] annotations. A rough outline of a function documentation is
```lua
--- {Brief}
---
--- {Long explanation}
---
---@param arg1 type {description}
---@param arg2 type {description}
{...}
---
---@return type {description}
```
```
If possible, always add type information (`table`, `string`, `number`, ...). Multiple valid types are separated by a bar (`string|table`). Indicate optional parameters via `type|nil`.
Documentation
-------------
If a function in your Lua module should not be documented (e.g. internal function or local function), you should set the doc comment to:
Read [:help dev-doc][dev-doc-guide] to understand the expected documentation style and conventions.
```
### Generating :help
---@private
Many `:help` docs are autogenerated from (C or Lua) docstrings. To generate the documentation run:
```bash
make doc
```
```
Mark functions that are deprecated as
To validate the documentation files, run:
```bash
make lintdoc
```
```
---@deprecated
If you need to modify or debug the documentation flow, these are the main files:
- `./src/gen/gen_vimdoc.lua`:
Main doc generator. Parses C and Lua files to render vimdoc files.
- `./src/gen/luacats_parser.lua`:
Documentation parser for Lua files.
- `./src/gen/cdoc_parser.lua`:
Documentation parser for C files.
- `./src/gen/luacats_grammar.lua`:
Lpeg grammar for LuaCATS
- `./src/gen/cdoc_grammar.lua`:
Lpeg grammar for C doc comments
- `./src/gen/gen_eval_files.lua`:
Generates documentation and Lua type files from metadata files:
```
runtime/lua/vim/* => runtime/doc/lua.txt
runtime/lua/vim/* => runtime/doc/lua.txt
runtime/lua/vim/lsp/ => runtime/doc/lsp.txt
src/nvim/api/* => runtime/doc/api.txt
src/nvim/eval.lua => runtime/doc/builtin.txt
src/nvim/options.lua => runtime/doc/options.txt
```
- `./scripts/lintdoc.lua`: Validation and linting of documentation files.
### Lua docstrings
Use [LuaLS] annotations in Lua docstrings to annotate parameter types, return
types, etc. See [:help dev-lua-doc][dev-lua-doc].
- The template for function documentation is:
```lua
--- {Brief}
---
--- {Long explanation}
---
--- @param arg1 type {description}
--- @param arg2 type {description}
--- ...
---
--- @return type {description}
```
- If possible, add type information (`table`, `string`, `number`, ...). Multiple valid types are separated by a bar (`string|table`). Indicate optional parameters via `type|nil`.
- If a function in your Lua module should _not_ be documented, add `@nodoc`.
- If the function is internal or otherwise non-public add `@private`.
- Private functions usually should be underscore-prefixed (named "_foo", not "foo").
- Mark deprecated functions with `@deprecated`.
Third-party dependencies
------------------------
To build Nvim using a different commit of a dependency change the appropriate
URL in `cmake.deps/deps.txt`. For example, to use a different version of luajit
replace the value in `LUAJIT_URL` with the wanted commit hash:
You can install Neovim from [download](#install-from-download), [package](#install-from-package), or [source](#install-from-source) in just a few seconds.
Several Neovim GUIs are available from scoop (extras): [scoop.sh/#/apps?q=neovim](https://scoop.sh/#/apps?q=neovim)
### Pre-built archives
0. If you are missing `VCRUNTIME140.dll`, install the [Visual Studio 2015 C++ redistributable](https://support.microsoft.com/en-us/kb/2977003) (choose x86_64 or x86 depending on your system).
1. Choose a package (**nvim-winXX.zip**) from the [releases page](https://github.com/neovim/neovim/releases).
2. Unzip the package. Any location is fine, administrator privileges are _not_ required.
-`$VIMRUNTIME` will be set to that location automatically.
3. Run `nvim.exe` from a terminal.
**Optional** steps:
- Add the `bin` folder (e.g. `C:\Program Files\nvim\bin`) to your PATH.
- This makes it easy to run `nvim` from anywhere.
- If `:set spell` does not work, create the `C:/Users/foo/AppData/Local/nvim/site/spell` folder.
You can then copy your spell files over (for English, located
[here](https://github.com/vim/vim/blob/master/runtime/spell/en.utf-8.spl) and
- For Python plugins you need the `pynvim` module. "Virtual envs" are recommended. After activating the virtual env do `pip install pynvim` (in *both*). Edit your `init.vim` so that it contains the path to the env's Python executable:
```vim
let g:python3_host_prog='C:/Users/foo/Envs/neovim3/Scripts/python.exe'
```
- Run `:checkhealth` and read `:help provider-python`.
- **init.vim ("vimrc"):** If you already have Vim installed you can copy `%userprofile%\_vimrc` to `%userprofile%\AppData\Local\nvim\init.vim` to use your Vim config with Neovim.
## macOS / OS X
### Pre-built archives
The [Releases](https://github.com/neovim/neovim/releases) page provides pre-built binaries for macOS 10.15+.
Then add this to your shell config (`~/.bashrc`, `~/.zshrc`, ...):
export PATH="$PATH:/opt/nvim-linux-x86_64/bin"
### AppImage ("universal" Linux package)
The [Releases](https://github.com/neovim/neovim/releases) page provides an [AppImage](https://appimage.org) that runs on most Linux systems. No installation is needed, just download `nvim-linux-x86_64.appimage` and run it. (It might not work if your Linux distribution is more than 4 years old.) The following instructions assume an `x86_64` architecture; on ARM Linux replace with `arm64`.
And the following line to your shell config (`~/.bashrc`, `~/.zshrc`, ...):
export PATH="$PATH:/opt/nvim/"
If the `./nvim-linux-x86_64.appimage` command fails, try:
```sh
./nvim-linux-x86_64.appimage --appimage-extract
./squashfs-root/AppRun --version
# Optional: exposing nvim globally.
sudo mv squashfs-root /
sudo ln -s /squashfs-root/AppRun /usr/bin/nvim
nvim
```
### Arch Linux
Neovim can be installed from the community repository:
sudo pacman -S neovim
Alternatively, Neovim can be also installed using the PKGBUILD [`neovim-git`](https://aur.archlinux.org/packages/neovim-git), available on the [AUR](https://wiki.archlinux.org/index.php/Arch_User_Repository).
Alternatively, Neovim Nightly builds can be also installed using the PKGBUILD [`neovim-nightly-bin`](https://aur.archlinux.org/packages/neovim-nightly-bin), available on the [AUR](https://wiki.archlinux.org/index.php/Arch_User_Repository).
The Python module is available from the community repository:
sudo pacman -S python-pynvim
Ruby modules (currently only supported in `neovim-git`) are available from the AUR as [`ruby-neovim`](https://aur.archlinux.org/packages/ruby-neovim).
### CentOS 8 / RHEL 8
Neovim is available through [EPEL (Extra Packages for Enterprise Linux)](https://fedoraproject.org/wiki/EPEL)
Neovim is available through the [neovim bundle](https://github.com/clearlinux/clr-bundles/blob/master/bundles/neovim)
sudo swupd bundle-add neovim
Python (`:python`) support is available if the [python-basic bundle](https://github.com/clearlinux/clr-bundles/blob/master/bundles/python-basic) is installed.
sudo swupd bundle-add python-basic
### Debian
Neovim is in [Debian](https://packages.debian.org/search?keywords=neovim).
sudo apt-get install neovim
Python (`:python`) support is installable via the package manager on Debian unstable.
sudo apt-get install python3-neovim
### Exherbo Linux
Exhereses for scm and released versions are currently available in repository `::medvid`. Python client (with GTK+ GUI included) and Qt5 GUI are also available as suggestions:
Neovim is in [Fedora](https://src.fedoraproject.org/rpms/neovim) starting with Fedora 25:
sudo dnf install -y neovim python3-neovim
You can also get nightly builds of git master from the [Copr automated build system](https://copr.fedoraproject.org/coprs/agriffis/neovim-nightly/):
dnf copr enable agriffis/neovim-nightly
dnf install -y neovim python3-neovim
See the [blog post](https://arongriffis.com/2019-03-02-neovim-nightly-builds) for information on how these are built.
### Flatpak
You can find Neovim on [Flathub](https://flathub.org/apps/details/io.neovim.nvim). Providing you have Flatpak [set up](https://flatpak.org/setup/):
flatpak install flathub io.neovim.nvim
flatpak run io.neovim.nvim
You can add `/var/lib/flatpak/exports/bin` (or `~/.local/share/flatpak/exports/bin` if you used `--user`) to the `$PATH` and run it with `io.neovim.nvim`.
Note that Flatpak'ed Neovim will look for `init.vim` in `~/.var/app/io.neovim.nvim/config/nvim` instead of `~/.config/nvim`.
### Gentoo Linux
An ebuild is available in Gentoo's official portage repository:
emerge -a app-editors/neovim
### GNU Guix
Neovim can be installed with:
guix install neovim
### GoboLinux
Neovim can be installed with:
sudo -H Compile NeoVim
### Nix / NixOS
Neovim can be installed with:
nix-env -iA nixpkgs.neovim
Or alternatively, if you use flakes:
nix profile install nixpkgs#neovim
### Mageia 7
urpmi neovim
To install the Python modules:
urpmi python3-pynvim
### makedeb Package Repository (MPR)
Neovim is available inside the [MPR](https://mpr.makedeb.org/packages/neovim). You can install it with:
git clone https://mpr.makedeb.org/neovim
cd neovim/
makedeb -si
### OpenSUSE
Neovim can be installed with:
sudo zypper in neovim
To install the Python modules:
sudo zypper in python-neovim python3-neovim
### PLD Linux
Neovim is in [PLD Linux](https://github.com/pld-linux/neovim):
poldek -u neovim
poldek -u python-neovim python3-neovim
poldek -u python-neovim-gui python3-neovim-gui
### Slackware
See [neovim on SlackBuilds](https://slackbuilds.org/apps/neovim/).
### Source Mage
Neovim can be installed using the Sorcery package manager:
cast neovim
### Solus
Neovim can be installed using the default package manager in Solus (eopkg):
sudo eopkg install neovim
### Snap
Neovim nightly and stable are available on the [snap store](https://snapcraft.io/nvim).
**Stable Builds**
```sh
sudo snap install nvim --classic
```
**Nightly Builds**
```sh
sudo snap install --edge nvim --classic
```
### Ubuntu
As in Debian, Neovim is in [Ubuntu](https://packages.ubuntu.com/search?keywords=neovim).
sudo apt install neovim
Python (`:python`) support seems to be automatically installed
sudo apt install python3-neovim
Neovim has been added to a "Personal Package Archive" (PPA). This allows you to install it with `apt-get`. Follow the links to the PPAs to see which versions of Ubuntu are currently available via the PPA. Choose **stable** or **unstable**:
**Important:** The Neovim team does not maintain the PPA packages. For problems or questions about the PPA specifically contact https://launchpad.net/~neovim-ppa.
To be able to use **add-apt-repository** you may need to install software-properties-common:
sudo apt-get install software-properties-common
If you're using an older version Ubuntu you must use:
Neovim can be installed using the xbps package manager
sudo xbps-install -S neovim
### Alpine Linux
Neovim can be installed using the apk package manager
sudo apk add neovim
## BSD
### FreeBSD
Neovim can be installed using [`pkg(8)`](https://www.freebsd.org/cgi/man.cgi?query=pkg&sektion=8&n=1):
pkg install neovim
or [from the ports tree](https://www.freshports.org/editors/neovim/):
cd /usr/ports/editors/neovim/ && make install clean
To install the pynvim Python modules using [`pkg(8)`](https://www.freebsd.org/cgi/man.cgi?query=pkg&sektion=8&n=1) run:
pkg install py36-pynvim
### OpenBSD
Neovim can be installed using [`pkg_add(1)`](https://man.openbsd.org/pkg_add):
pkg_add neovim
or [from the ports tree](https://cvsweb.openbsd.org/cgi-bin/cvsweb/ports/editors/neovim/):
cd /usr/ports/editors/neovim/ && make install
## Android
[Termux](https://github.com/termux/termux-app) offers a Neovim package.
Install from source
===================
If a package is not provided for your platform, you can build Neovim from source. See [BUILD.md](./BUILD.md) for details. If you have the [prerequisites](./BUILD.md#build-prerequisites) then building is easy:
make CMAKE_BUILD_TYPE=Release
sudo make install
For Unix-like systems this installs Neovim to `/usr/local`, while for Windows to `C:\Program Files`. Note, however, that this can complicate uninstallation. The following example avoids this by isolating an installation under `$HOME/neovim`:
rm -r build/ # clear the CMake cache
make CMAKE_EXTRA_FLAGS="-DCMAKE_INSTALL_PREFIX=$HOME/neovim"
make install
export PATH="$HOME/neovim/bin:$PATH"
## Uninstall
There is a CMake target to _uninstall_ after `make install`:
```sh
sudo cmake --build build/ --target uninstall
```
Alternatively, just delete the `CMAKE_INSTALL_PREFIX` artifacts:
@ -22,10 +22,10 @@ In practice we haven't found a way to forecast more precisely than "next" and
* Next feature-release (1.x.0)
* Next feature-release (1.x.0)
The forecasting problem might be solved with an explicit priority system (like
The forecasting problem might be solved with an explicit priority system (like
Bram's todo.txt). Meanwhile the Neovim priority system is defined by:
Vim's todo.txt). Meanwhile the Neovim priority system is defined by:
* PRs nearing completion.
* PRs nearing completion.
* Issue labels. E.g. the `+plan` label increases the ticket's priority merely
* Issue labels. E.g. the `has:plan` label increases the ticket's priority merely
for having a plan written down: it is _closer to completion_ than tickets
for having a plan written down: it is _closer to completion_ than tickets
without a plan.
without a plan.
* Comment activity or new information.
* Comment activity or new information.
@ -50,20 +50,78 @@ has a major bug:
1. Fix the bug on `master`.
1. Fix the bug on `master`.
2. Cherry-pick the fix to `release-x.y`.
2. Cherry-pick the fix to `release-x.y`.
3. Cut a release from `release-x.y`.
3. Cut a release from `release-x.y`.
* Run `./scripts/release.sh`
* Run `./scripts/release.sh` (requires [git cliff](https://github.com/orhun/git-cliff))
* Update (force-push) the remote `stable` tag.
* The [CI job](https://github.com/neovim/neovim/blob/3d45706478cd030c3ee05b4f336164bb96138095/.github/workflows/release.yml#L11-L13)
* The [CI job](https://github.com/neovim/neovim/blob/3d45706478cd030c3ee05b4f336164bb96138095/.github/workflows/release.yml#L11-L13)
will update the release assets and force-push to the `stable` tag.
will update the release assets and [force-push to the "stable" tag](https://github.com/neovim/neovim/blob/cdd87222c86c5b2274a13d36f23de0637462e317/.github/workflows/release.yml#L229).
### Release automation
### Release automation
Neovim automation includes a [backport bot](https://github.com/zeebe-io/backport-action).
Neovim automation includes a [backport bot](https://github.com/korthout/backport-action).
Trigger the action by labeling a PR with `backport release-X.Y`. See `.github/workflows/backport.yml`.
Trigger the action by labeling a PR with `ci:backport release-x.y`. See `.github/workflows/backport.yml`.
Deprecating and removing features
---------------------------------
Neovim inherits many features and design decisions from Vim, not all of which
align with the goals of this project. It is sometimes desired or necessary to
remove existing features, or refactor parts of the code that would change
user's workflow. In these cases, a deprecation policy is needed to properly
inform users of the change.
When a (non-experimental) feature is slated to be removed it should:
1. Be _soft_ deprecated in the _next_ release
- Use of the deprecated feature will still work.
- This means deprecating via documentation and annotation (`@deprecated`).
- Include a note in `deprecated.txt`.
- For Lua features, use `vim.deprecate()`. The specified version is the
current minor version + 2. For example, if the current version is
`v0.10.0-dev-1957+gd676746c33` then use `0.12`.
- For Vimscript features, use `v:lua.vim.deprecate()`. Use the same version
as described for Lua features.
-`vim.deprecate(…, 'x.y.z')` where major version `x` is greater than the
current Nvim major version, is always treated as _soft_ deprecation.
2. Be _hard_ deprecated in a following a release in which it was soft deprecated.
- Use of the deprecated feature will still work but should issue a warning.
- Features implemented in C will need bespoke implementations to communicate
to users that the feature is deprecated.
3. Be removed in a release following the release in which it was hard deprecated
- Usually this will be the next release, but it may be a later release if
a longer deprecation cycle is desired
- If possible, keep the feature as a stub (e.g. function API) and issue an
Feature removals which may benefit from community input or further discussion
should also have a tracking issue (which should be linked to in the release
notes).
Exceptions to this policy may be made (for experimental subsystems or when
there is broad consensus among maintainers). The rationale for the exception
should be stated explicitly and publicly.
Third-party dependencies
Third-party dependencies
------------------------
------------------------
These "bundled" dependencies can be updated by bumping their versions in `cmake.deps/CMakeLists.txt`.
For some dependencies we maintain temporary "forks", which are simply private
branches with a few extra patches, while we wait for the upstream project to
merge the patches. This is done instead of maintaining the patches as (fragile)
CMake `PATCH_COMMAND` steps.
These "bundled" dependencies can be updated by bumping their versions in `cmake.deps/deps.txt`.
Some can be auto-bumped by `scripts/bump_deps.lua`.
Some can be auto-bumped by `scripts/bump_deps.lua`.
* [LuaJIT](https://github.com/LuaJIT/LuaJIT)
* [LuaJIT](https://github.com/LuaJIT/LuaJIT)
@ -72,14 +130,12 @@ Some can be auto-bumped by `scripts/bump_deps.lua`.
* When bumping, also sync [our bundled documentation](https://github.com/neovim/neovim/blob/master/runtime/doc/luvref.txt) with [the upstream documentation](https://github.com/luvit/luv/blob/master/docs.md).
* When bumping, also sync [our bundled documentation](https://github.com/neovim/neovim/blob/master/runtime/doc/luvref.txt) with [the upstream documentation](https://github.com/luvit/luv/blob/master/docs.md).
* The original project [was abandoned](https://github.com/neovim/neovim/issues/10302), so the [neovim/unibilium](https://github.com/neovim/unibilium) fork is considered "upstream" and is maintained on the `master` branch.
- [Shared data (shada)](https://github.com/neovim/neovim/pull/2506) among multiple editor instances
- [Shared data (shada)](https://github.com/neovim/neovim/pull/2506) among multiple editor instances
- [XDG base directories](https://github.com/neovim/neovim/pull/3470) support
- [XDG base directories](https://github.com/neovim/neovim/pull/3470) support
@ -48,7 +46,7 @@ Pre-built packages for Windows, macOS, and Linux are found on the
Install from source
Install from source
-------------------
-------------------
See the [Building Neovim](https://github.com/neovim/neovim/wiki/Building-Neovim) wiki page and [supported platforms](https://neovim.io/doc/user/support.html#supported-platforms) for details.
See [BUILD.md](./BUILD.md) and [supported platforms](https://neovim.io/doc/user/support.html#supported-platforms) for details.
The build is CMake-based, but a Makefile is provided as a convenience.
The build is CMake-based, but a Makefile is provided as a convenience.
After installing the dependencies, run the following command.
After installing the dependencies, run the following command.
@ -81,7 +79,7 @@ Project layout
├─ runtime/ plugins and docs
├─ runtime/ plugins and docs
├─ src/nvim/ application source code (see src/nvim/README.md)
├─ src/nvim/ application source code (see src/nvim/README.md)
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
