264cf5cfaf
patch 8.1.0295: no 'incsearch' highlighting for :vimgrep and similar
...
Problem: No 'incsearch' highlighting for :vimgrep and similar commands.
Solution: Parse the :vimgrep command and similar ones to locate the search
pattern. (Hirohito Higashi, closes #3344 )
2018-08-18 21:05:31 +02:00
3b9fcfcffa
patch 8.1.0294: MS-Windows: sometimes uses short directory name
...
Problem: MS-Windows: sometimes uses short directory name.
Solution: Expand to long file name with correct caps. (Nobuhiro Takasaki,
closes #3334 )
2018-08-18 20:20:27 +02:00
4d77c65a9e
patch 8.1.0293: checks for type of stack is cryptic
...
Problem: Checks for type of stack is cryptic.
Solution: Define IS_QF_STACK() and IS_LL_STACK(). (Yegappan Lakshmanan)
2018-08-18 19:59:54 +02:00
9bc1eac2c7
patch 8.1.0292: MS-Windows: the text "self-installing" confuses some users
...
Problem: MS-Windows: the text "self-installing" confuses some users.
Solution: Remove the text from the uninstall entry. (closes #3337 )
2018-08-18 19:04:37 +02:00
81f56536b1
patch 8.1.0291: 'incsearch' highlighting not used for :sort
...
Problem: 'incsearch' highlighting not used for :sort.
Solution: Handle pattern in :sort command.
2018-08-18 16:19:42 +02:00
b476cb7d8d
patch 8.1.0290: "cit" on an empty HTML tag changes the whole tag
...
Problem: "cit" on an empty HTML tag changes the whole tag.
Solution: Only adjust the area in Visual mode. (Andy Massimino,
closes #3332 )
2018-08-16 21:37:50 +02:00
2dfcef4c08
patch 8.1.0289: cursor moves to wrong column after quickfix jump
...
Problem: Cursor moves to wrong column after quickfix jump.
Solution: Set the curswant flag. (Andy Massimino, closes #3331 )
2018-08-15 22:29:51 +02:00
396659592f
patch 8.1.0288: quickfix code uses cmdidx too often
...
Problem: Quickfix code uses cmdidx too often.
Solution: Add is_loclist_cmd(). (Yegappan Lakshmanan)
2018-08-15 20:59:48 +02:00
37b15568c2
patch 8.1.0287: MAX is not defined everywhere
...
Problem: MAX is not defined everywhere.
Solution: Define MAX where needed.
2018-08-14 22:08:25 +02:00
167ae42685
patch 8.1.0286: 'incsearch' does not apply to :smagic and :snomagic
...
Problem: 'incsearch' does not apply to :smagic and :snomagic.
Solution: Add support. (Hirohito Higashi)
2018-08-14 21:32:21 +02:00
d7cc163570
patch 8.1.0285: compiler warning for conversion
...
Problem: Compiler warning for conversion.
Solution: Add a type cast. (Mike Williams)
2018-08-14 20:18:26 +02:00
2f6a346a4c
patch 8.1.0284: 'cursorline' highlighting wrong with 'incsearch'
...
Problem: 'cursorline' highlighting wrong with 'incsearch'.
Solution: Move the cursor back if the match is outside the range.
2018-08-14 18:16:52 +02:00
80d83c094d
patch 8.1.0283: missing test dump
...
Problem: Missing test dump.
Solution: Add the dump file
2018-08-14 17:28:56 +02:00
33c4dbb74b
patch 8.1.0282: 'incsearch' does not work with command modifiers
...
Problem: 'incsearch' does not work with command modifiers.
Solution: Skip command modifiers.
2018-08-14 16:06:16 +02:00
effed9315c
patch 8.1.0281: parsing command modifiers is not separated
...
Problem: Parsing command modifiers is not separated.
Solution: Move command modifier parsing to a separate function.
2018-08-14 13:38:17 +02:00
def7b1dc61
patch 8.1.0280: 'incsearch' highlighting does not work for ":g!/"
...
Problem: 'incsearch' highlighting does not work for ":g!/".
Solution: Skip the exclamation mark. (Hirohito Higashi)
2018-08-13 22:54:35 +02:00
2b926fcb3c
patch 8.1.0279: 'incsearch' highlighting does not skip white space
...
Problem: 'incsearch' highlighting does not skip white space.
Solution: Skip white space after the command. (issue #3321 )
2018-08-13 11:07:57 +02:00
60d0871000
patch 8.1.0278: 'incsearch' highlighting does not accept reverse range
...
Problem: 'incsearch' highlighting does not accept reverse range.
Solution: Swap the range when needed. (issue #3321 )
2018-08-12 21:53:15 +02:00
c7f08b7ee1
patch 8.1.0277: 'incsearch' highlighting wrong in a few cases
...
Problem: 'incsearch' highlighting wrong in a few cases.
Solution: Fix using last search pattern. Restore highlighting when changing
command. (issue #3321 )
2018-08-12 17:39:14 +02:00
164251ff80
patch 8.1.0276: no test for 'incsearch' highlighting with :s
...
Problem: No test for 'incsearch' highlighting with :s.
Solution: Add a screendump test.
2018-08-12 16:26:58 +02:00
976b847f43
patch 8.1.0275: 'incsearch' with :s doesn't start at cursor line
...
Problem: 'incsearch' with :s doesn't start at cursor line.
Solution: Set cursor before parsing address. (closes #3318 )
Also accept a match at the start of the first line.
2018-08-12 15:49:47 +02:00
21f990e1c2
patch 8.1.0274: 'incsearch' triggers on ":source"
...
Problem: 'incsearch' triggers on ":source".
Solution: Check for the whole command name.
2018-08-11 19:20:49 +02:00
ef73a28401
patch 8.1.0273: invalid memory access when using 'incsearch'
...
Problem: Invalid memory access when using 'incsearch'.
Solution: Reset "patlen" when using previous search pattern.
2018-08-11 19:02:22 +02:00
d473c8c101
Update runtime files.
2018-08-11 18:00:22 +02:00
f53c692240
patch 8.1.0272: options test fails if temp var ends in slash
...
Problem: Options test fails if temp var ends in slash. (Tom Briden)
Solution: Check for optional slash. (closes #3308 )
2018-08-11 17:53:04 +02:00
b0acacd767
patch 8.1.0271: 'incsearch' doesn't work for :s, :g or :v
...
Problem: 'incsearch' doesn't work for :s, :g or :v.
Solution: Also use 'incsearch' for other commands that use a pattern.
2018-08-11 16:40:43 +02:00
b31a3acce1
patch 8.1.0270: checking for a Tab in a line could be faster
...
Problem: Checking for a Tab in a line could be faster.
Solution: Use strchr() instead of strrchr(). (closes #3312 )
2018-08-11 14:41:55 +02:00
51e9fbf1c7
patch 8.1.0269: Ruby Kernel.#p method always returns nil
...
Problem: Ruby Kernel.#p method always returns nil.
Solution: Copy p method implementation from Ruby code. (Masataka Pocke
Kuwabara, closes #3315 )
2018-08-11 14:24:11 +02:00
d569bb0299
patch 8.1.0268: file type checking has too many #ifdef
...
Problem: File type checking has too many #ifdef.
Solution: Always define the S_IF macros. (Ken Takata, closes #3306 )
2018-08-11 13:57:20 +02:00
90f1e2b7bc
patch 8.1.0267: no good check if restoring quickfix list worked
...
Problem: No good check if restoring quickfix list worked.
Solution: Let qf_restore_list() return OK/FAIL. (Yegappan Lakshmanan)
2018-08-11 13:36:56 +02:00
ee8415bc59
patch 8.1.0266: parsing Ex address range is not a separate function
...
Problem: Parsing Ex address range is not a separate function.
Solution: Refactor do_one_cmd() to separate address parsing.
2018-08-10 23:13:12 +02:00
0ee81cb638
patch 8.1.0265: the getcmdline() function is way too big
...
Problem: The getcmdline() function is way too big.
Solution: Factor out the incremental search highlighting.
2018-08-10 22:07:32 +02:00
efe03738f6
patch 8.1.0264: backup tests fail when CWD is in /tmp
...
Problem: Backup tests fail when CWD is in /tmp.
Solution: Make 'backupskip' empty. (Christian Brabandt, closes #3301 )
2018-08-09 22:26:38 +02:00
4b16ee743e
patch 8.1.0263: channel log doesn't show part of channel
...
Problem: Channel log doesn't show part of channel.
Solution: Add "sock", "out", "err" or "in". (Ozaki Kiichi, closes #3303 )
2018-08-09 22:15:34 +02:00
1598f9937a
patch 8.1.0262: not enough testing for getftype()
...
Problem: Not enough testing for getftype().
Solution: Add a test. (Dominique Pelle, closes #3300 )
2018-08-09 22:08:57 +02:00
38efd1d17a
patch 8.1.0261: Coverity complains about a negative array index
...
Problem: Coverity complains about a negative array index.
Solution: When qf_id2nr() cannot find the list then don't set qf_curlist.
2018-08-09 21:52:24 +02:00
4d37557ac6
patch 8.1.0260: no LGTM logo in README file
...
Problem: No LGTM logo in README file.
Solution: Add one. (Bas van Schaik, closes #3305 )
2018-08-09 21:33:38 +02:00
3f347e4716
patch 8.1.0259: no test for fixed quickfix issue
...
Problem: No test for fixed quickfix issue.
Solution: Add a test. Clean up the code a bit. (Yegappan Lakshmanan)
2018-08-09 21:19:20 +02:00
af559d2c9f
patch 8.1.0258: not enough testing for the CompleteDone event
...
Problem: Not enough testing for the CompleteDone event.
Solution: Add a test. (closes #3297 )
2018-08-08 22:55:41 +02:00
bfde0b482d
patch 8.1.0257: no test for pathshorten()
...
Problem: No test for pathshorten().
Solution: Add a test. (Dominique Pelle, closes #3295 )
2018-08-08 22:27:31 +02:00
9fa9506853
patch 8.1.0256: using setline() in TextChangedI splits undo
...
Problem: Using setline() in TextChangedI splits undo.
Solution: Use another solution for undo not working properly.
2018-08-08 22:08:32 +02:00
f8f88f89e1
patch 8.1.0255: backup test fails when using shadow directory
...
Problem: Backup test fails when using shadow directory.
Solution: Remove check for "src".
2018-08-08 11:02:32 +02:00
980bab457e
patch 8.1.0254: cannot build on MS-Windows; unused macro HAVE_HANDLE_DROP
...
Problem: Cannot build on MS-Windows; Unused macro HAVE_HANDLE_DROP.
Solution: Adjust #ifdef. Delete the macro.
2018-08-07 22:42:53 +02:00
40385dbcdf
patch 8.1.0253: saving and restoring window title does not always work
...
Problem: Saving and restoring window title does not always work.
Solution: Use the stack push and pop commands. (Kouichi Iwamoto,
closes #3059 )
2018-08-07 22:31:44 +02:00
de3b3677f7
patch 8.1.0252: quickfix functions are too long
...
Problem: Quickfix functions are too long.
Solution: Refactor. (Yegappan Lakshmanan, closes #2950 )
2018-08-07 21:54:41 +02:00
b782ba475a
patch 8.1.0251: using full path is not supported for 'backupdir'
...
Problem: Using a full path is supported for 'directory' but not for
'backupdir'. (Mikolaj Machowski)
Solution: Support 'backupdir' as well. (Christian Brabandt, closes #179 )
2018-08-07 21:39:28 +02:00
b1cf16113f
patch 8.1.0250: MS-Windows using VTP: windows size change incorrect
...
Problem: MS-Windows using VTP: windows size change incorrect.
Solution: Call SetConsoleScreenBufferSize() first. (Nobuhiro Takasaki,
closes #3164 )
2018-08-07 20:47:16 +02:00
7ebf4e1c34
patch 8.1.0249: GTK: when screen DPI changes Vim does not handle it
...
Problem: GTK: when screen DPI changes Vim does not handle it.
Solution: Handle the gtk-xft-dpi signal. (Roel van de Kraats,
closes #2357 )
2018-08-07 20:01:40 +02:00
8d8a65e389
patch 8.1.0248: duplicated quickfix code
...
Problem: duplicated quickfix code.
Solution: Move the code to a function.
2018-08-07 19:48:08 +02:00
447bd5a346
patch 8.1.0247: Python: error message for failing import is incorrect
...
Problem: Python: error message for failing import is incorrect.
Solution: Adjust how modules are loaded. (Ozaki Kiichi, closes #3162 )
2018-08-07 19:45:27 +02:00
ee380ae376
patch 8.1.0246: build failure without the +eval feature
...
Problem: Build failure without the +eval feature.
Solution: Add #ifdef
2018-08-07 19:32:52 +02:00
91d2e783b4
patch 8.1.0245: calling setline() in TextChangedI autocmd breaks undo
...
Problem: Calling setline() in TextChangedI autocmd breaks undo. (Jason
Felice)
Solution: Don't save lines for undo when already saved. (closes #3291 )
2018-08-07 19:05:01 +02:00
917e32bda5
patch 8.1.0244: no redraw when using a STOP signal on Vim and then CONT
...
Problem: No redraw when using a STOP signal on Vim and then a CONT signal.
Solution: Catch the CONT signal and force a redraw. (closes #3285 )
2018-08-07 17:38:41 +02:00
5db7eec423
patch 8.1.0243: using :term ++close ++hidden closes a window
...
Problem: Using :term ++close ++hidden closes a window. (Marcin Szamotulski)
Solution: Don't close the window if only using it temporarily for unloading
the terminal buffer. (closes #3287 )
2018-08-07 16:33:18 +02:00
02ab97709d
patch 8.1.0242: Insert mode completion may use an invalid buffer pointer
...
Problem: Insert mode completion may use an invalid buffer pointer.
Solution: Check for ins_buf to be valid. (closes #3290 )
2018-08-07 14:55:09 +02:00
7cc596547a
patch 8.1.0241: effect of ":tabmove N" is not clear
...
Problem: Effect of ":tabmove N" is not clear.
Solution: Add a test that shows the behavior. (Christian Brabandt,
closes #3288 )
2018-08-07 13:14:46 +02:00
3cb4448b8a
patch 8.1.0240: g:actual_curbuf set in wrong scope
...
Problem: g:actual_curbuf set in wrong scope. (Daniel Hahler)
Solution: Prepend the "g:" name space. (closes #3279 )
2018-08-05 13:22:26 +02:00
218beb3e96
patch 8.1.0239: now Ruby build fails on other systems
...
Problem: Now Ruby build fails on other systems.
Solution: Always define rb_intern. (Ken Takata, closes #3275 )
2018-08-04 17:24:44 +02:00
7da1fb5532
patch 8.1.0238: 'buftype' is cleared when using ":term ++hidden cat"
...
Problem: 'buftype' is cleared when using ":term ++hidden cat". (Marcin
Szamotulski)
Solution: Set the "options initialized" flag earlier. (closes #3278 )
2018-08-04 16:54:11 +02:00
87ea64ca96
patch 8.1.0237: Ruby on Cygwin doesn't always work
...
Problem: Ruby on Cygwin doesn't always work.
Solution: Use LIBRUBY_SO if LIBRUBY_ALIASES isn't set. (Ken Takata)
2018-08-04 15:13:34 +02:00
82593c1a3a
patch 8.1.0236: Ruby build fails when ruby_intern is missing
...
Problem: Ruby build fails when ruby_intern is missing.
Solution: Do not use ruby_intern2. (Ken Takata)
2018-08-03 22:03:17 +02:00
3bf5e6a4c8
patch 8.1.0235: more help tags that jump to the wrong location
...
Problem: More help tags that jump to the wrong location.
Solution: Add more exceptions and a table for "expr-" tags. (Hirohito
Higashi)
2018-08-02 22:23:57 +02:00
41c363a315
patch 8.1.0234: incorrect reference counting in Perl interface
...
Problem: Incorrect reference counting in Perl interface.
Solution: Call SvREFCNT_inc more often, add a test. (Damien)
2018-08-02 21:46:51 +02:00
ded27a1feb
patch 8.1.0233: "safe" argument of call_vim_function() is always FALSE
...
Problem: "safe" argument of call_vim_function() is always FALSE.
Solution: Remove the argument.
2018-08-01 19:06:03 +02:00
f711cb2f12
patch 8.1.0232: Ruby error does not include backtrace
...
Problem: Ruby error does not include backtrace.
Solution: Add an error backtrace. (Masataka Pocke Kuwabara, closes #3267 )
2018-08-01 18:42:13 +02:00
a5bc38b8c1
patch 8.1.0231: :help -? goes to help for -+
...
Problem: :help -? goes to help for -+.
Solution: Add -? to list of special cases. (Hirohito Higashi)
2018-08-01 18:03:02 +02:00
91335e5a67
patch 8.1.0230: directly checking 'buftype' value
...
Problem: Directly checking 'buftype' value.
Solution: Add the bt_normal() function. (Yegappan Lakshmanan)
2018-08-01 17:53:12 +02:00
d2855f5454
Update runtime files.
2018-07-31 22:23:58 +02:00
79c2ad50b8
patch 8.1.0229: crash when dumping profiling data
...
Problem: Crash when dumping profiling data.
Solution: Reset flag indicating that initialization was done.
2018-07-29 17:40:43 +02:00
92d147be95
patch 8.1.0228: dropping files is ignored while Vim is busy
...
Problem: Dropping files is ignored while Vim is busy.
Solution: Postpone the effect of dropping files until it's safe.
2018-07-29 17:35:23 +02:00
fda95e7572
patch 8.1.0227: spaces instead of tabs in makefile
...
Problem: Spaces instead of tabs in makefile.
Solution: Use tabs and fix sorting. (Ken Takata)
2018-07-29 16:13:17 +02:00
1f0bfe5617
patch 8.1.0226: too many #ifdefs
...
Problem: Too many #ifdefs.
Solution: Graduate the +vreplace feature, it's not much code and quite a few
#ifdefs.
2018-07-29 16:09:22 +02:00
612cc3888b
patch 8.1.0225: mode() does not indicate using CTRL-O from Insert mode
...
Problem: Mode() does not indicate using CTRL-O from Insert mode.
Solution: Add "niI", "niR" and "niV" to mode() result. (closes #3000 )
2018-07-29 15:34:26 +02:00
91f84f6e11
Update runtime files.
2018-07-29 15:07:52 +02:00
fdd7155fab
patch 8.1.0224: hang in bracketed paste mode when t_PE not encountered
...
Problem: Hang in bracketed paste mode when t_PE not encountered.
Solution: Break out of the loop when got_int is set. (suggested by Christian
Brabandt, closes #3146 )
2018-07-28 23:12:05 +02:00
6ab9e429da
patch 8.1.0223: completing shell command finds sub-directories in $PATH
...
Problem: Completing shell command finds sub-directories in $PATH.
Solution: Remove EW_DIR when completing an item in $PATH. (Jason Franklin)
2018-07-28 19:20:13 +02:00
73b4abae5d
patch 8.1.0222: errors are reported for "make install"
...
Problem: Errors are reported for "make install".
Solution: Skip missing language files. (Christian Brabandt, closes #3254 )
2018-07-28 18:16:48 +02:00
edd6aacb01
patch 8.1.0221: not enough testing for the Ruby interface
...
Problem: Not enough testing for the Ruby interface.
Solution: Add more tests. (Dominique Pelle, closes #3252 )
2018-07-28 17:29:19 +02:00
d84b26a03b
patch 8.1.0220: Ruby converts v:true and v:false to a number
...
Problem: Ruby converts v:true and v:false to a number.
Solution: Use Qtrue and Qfalse instead. (Masataka Pocke Kuwabara,
closes #3259 )
2018-07-28 17:18:09 +02:00
2c8c681bfc
patch 8.1.0219: expanding ## fails to escape backtick
...
Problem: Expanding ## fails to escape backtick.
Solution: Escape a backtick in a file name. (closes #3257 )
2018-07-28 17:07:52 +02:00
95e51470f1
patch 8.1.0218: cannot add matches to another window
...
Problem: Cannot add matches to another window. (Qiming Zhao)
Solution: Add the "window" argument to matchadd() and matchaddpos().
(closes #3260 )
2018-07-28 16:55:56 +02:00
fd249460fe
patch 8.1.0217: compiler warning for variable set but not used
...
Problem: Compiler warning for variable set but not used.
Solution: Move tilde_file inside #ifdef. (Hirohito Higashi, closes #3255 )
2018-07-28 16:14:30 +02:00
8e85db0376
patch 8.1.0216: part of file not indented properly
...
Problem: Part of file not indented properly.
Solution: Adjust the indent. (Ken Takata)
2018-07-27 23:16:51 +02:00
d2a054910b
patch 8.1.0215: no error if configure --with-x cannot configure X
...
Problem: No error if configure --with-x cannot configure X.
Solution: Check that when --with-x is used X can be configured.
2018-07-27 22:35:15 +02:00
83ec2a7f5f
patch 8.1.0214: +autochdir feature not reported by has() or :version
...
Problem: +autochdir feature not reported by has() or :version.
Solution: Add the feature in the list.
2018-07-27 22:08:59 +02:00
0a08c63da1
patch 8.1.0213: CTRL-W CR does not work properly in a quickfix window
...
Problem: CTRL-W CR does not work properly in a quickfix window.
Solution: Split the window if needed. (Jason Franklin)
2018-07-25 22:36:52 +02:00
53901442f3
patch 8.1.0212: preferred cursor column not set in interfaces
...
Problem: Preferred cursor column not set in interfaces.
Solution: Set w_set_curswant when setting the cursor. (David Hotham,
closes #3060 )
2018-07-25 22:02:36 +02:00
00136dc321
patch 8.1.0211: expanding a file name "~" results in $HOME
...
Problem: Expanding a file name "~" results in $HOME. (Aidan Shafran)
Solution: Change "~" to "./~" before expanding. (closes #3072 )
2018-07-25 21:19:13 +02:00
6f8d2ac6f1
patch 8.1.0210: still a few K&R function declarations
...
Problem: Still a few K&R function declarations.
Solution: Use ANSI function declarations (Hirohito Higashi)
2018-07-25 19:49:45 +02:00
b6c8cd8dc3
patch 8.1.0209: stderr output from Ruby messes up display
...
Problem: Stderr output from Ruby messes up display.
Solution: Turn the stderr output into a Vim message. (Masataka Pocke
Kuwabara, closes #3238 )
2018-07-24 05:41:30 +02:00
7624af0294
patch 8.1.0208: file left behind after running individual test
...
Problem: File left behind after running individual test.
Solution: Delete the file.
2018-07-24 04:51:20 +02:00
68f1b1b37f
patch 8.1.0207: need many menu translation files to cover regions
...
Problem: Need many menu translation files to cover regions.
Solution: When there is no region match, try without. (Christian Brabandt)
2018-07-23 05:10:14 +02:00
cd96eef3a8
patch 8.1.0206: duplicate test function name
...
Problem: Duplicate test function name.
Solution: Rename both functions.
2018-07-23 04:49:23 +02:00
9cf4b5005f
patch 8.1.0205: invalid memory access with invalid modeline
...
Problem: Invalid memory access with invalid modeline.
Solution: Pass pointer limit. Add a test. (closes #3241 )
2018-07-23 04:12:03 +02:00
947b39e761
patch 8.1.0204: inputlist() is not tested
...
Problem: inputlist() is not tested.
Solution: Add a test. (Dominique Pelle, closes #3240 )
2018-07-22 19:36:37 +02:00
578333b2ec
patch 8.1.0203: building with Perl 5.28 fails on Windows
...
Problem: Building with Perl 5.28 fails on Windows.
Solution: Define Perl_mg_get. (closes #3196 )
2018-07-22 07:31:09 +02:00
6183ccbd67
patch 8.1.0202: :version always shows +packages
...
Problem: :version always shows +packages. (Takuya Fujiwara)
Solution: Add #ifdef (closes #3198 ) Also for has().
2018-07-22 05:08:11 +02:00
79a494d5e2
patch 8.1.0201: newer Python uses "importlib" instead of "imp"
...
Problem: Newer Python uses "importlib" instead of "imp".
Solution: Use "importlib" for newer Python versions. (closes #3163 )
2018-07-22 04:30:21 +02:00
a9604e6145
Update runtime files.
2018-07-21 05:56:22 +02:00
872e451e8c
patch 8.1.0200: spellbadword() not tested
...
Problem: spellbadword() not tested.
Solution: Add a test. (Dominique Pelle, closes #3235 )
2018-07-20 23:36:26 +02:00
66ab916935
patch 8.1.0199: spellbadword() does not check for caps error
...
Problem: spellbadword() does not check for caps error. (Dominique Pelle)
Solution: Adjust capcol when advancing.
2018-07-20 20:28:48 +02:00
0a6efcd27d
patch 8.1.0198: there is no hint that syntax is disabled for 'redrawtime'
...
Problem: There is no hint that syntax is disabled for 'redrawtime'.
Solution: Add a message.
2018-07-20 19:56:10 +02:00
9e42c86648
patch 8.1.0197: Windows GUI: title for search/replace is wrong
...
Problem: Windows GUI: title for search/replace is wrong.
Solution: Remove remark about doubling backslash. (closes #3230 )
2018-07-20 05:03:16 +02:00
f63db65b24
patch 8.1.0196: terminal debugger error with .gdbinit file
...
Problem: Terminal debugger error with .gdbinit file.
Solution: Check two lines for the "new ui" response. (hint from Hirohito
Higashi)
2018-07-19 04:13:36 +02:00
963c1ad5d0
patch 8.1.0195: terminal debugger commands don't always work
...
Problem: Terminal debugger commands don't always work. (Dominique Pelle)
Solution: Set 'cpo' to its default value when defining commands. (Christian
Brabandt)
2018-07-19 02:55:01 +02:00
414998023f
patch 8.1.0194: possibly use of NULL pointer
...
Problem: Possibly use of NULL pointer. (Coverity)
Solution: Reset the re_in_use flag earlier.
2018-07-18 06:02:09 +02:00
ca4cc018ad
patch 8.1.0193: terminal debugger buttons don't always work
...
Problem: Terminal debugger buttons don't always work. (Dominique Pelle)
Solution: Set 'cpo' to its default value.
2018-07-17 05:55:12 +02:00
0270f38e1a
patch 8.1.0192: executing regexp recursively fails with a crash
...
Problem: Executing regexp recursively fails with a crash.
Solution: Move global variables into "rex".
2018-07-17 05:43:58 +02:00
3166afd945
patch 8.1.0191: Perl test fails in 24 line terminal
...
Problem: Perl test fails in 24 line terminal.
Solution: Create fewer windows.
2018-07-16 18:09:14 +02:00
18c4f1badb
patch 8.1.0190: Perl refcounts are wrong
...
Problem: Perl refcounts are wrong.
Solution: Improve refcounting. Add a test. (Damien)
2018-07-16 17:45:38 +02:00
d90a144eda
patch 8.1.0189: function defined in sandbox not tested
...
Problem: Function defined in sandbox not tested.
Solution: Add a text.
2018-07-15 20:24:31 +02:00
b477af2260
Update runtime files.
2018-07-15 20:20:18 +02:00
2196bca737
patch 8.1.0188: no test for ":cscope add"
...
Problem: No test for ":cscope add".
Solution: Add a test. (Dominique Pelle, closes #3212 )
2018-07-15 17:36:32 +02:00
7132ddc101
patch 8.1.0187: getwininfo() and win_screenpos() return different numbers
...
Problem: getwininfo() and win_screenpos() return different numbers.
Solution: Add one to "wincol" and "winrow" from getwininfo().
2018-07-15 17:01:11 +02:00
44a693a1bd
patch 8.1.0186: test for getwininfo() fails in GUI
...
Problem: Test for getwininfo() fails in GUI.
Solution: Account for missing tabline.
2018-07-14 22:23:47 +02:00
1ce9a1515b
patch 8.1.0185: running tests writes lua.vim even though it is not used
...
Problem: Running tests writes lua.vim even though it is not used.
Solution: Stop writing lua.vim.
2018-07-14 21:48:46 +02:00
b6959a8e06
patch 8.1.0184: not easy to figure out the window layout
...
Problem: Not easy to figure out the window layout.
Solution: Add "wincol" and "winrow" to what getwininfo() returns.
2018-07-14 21:41:44 +02:00
1741367131
patch 8.1.0183: Lua API changed, breaking the build
...
Problem: Lua API changed, breaking the build.
Solution: Adjust prototype of lua_rawgeti(). (Ken Takata,
closes #3157 , closes #3144 )
2018-07-14 20:49:42 +02:00
4fc85003c5
patch 8.1.0182: Unicode standard was updated
...
Problem: Unicode standard was updated.
Solution: Include the changes. (Christian Brabandt)
2018-07-14 19:30:36 +02:00
a43ebe9454
patch 8.1.0181: memory leak with trailing characters in skip expression
...
Problem: Memory leak with trailing characters in skip expression.
Solution: Free the return value.
2018-07-14 17:25:01 +02:00
d6ef5f9b3d
patch 8.1.0180: static analysis errors in Lua interface
...
Problem: Static analysis errors in Lua interface. (Coverity)
Solution: Check for NULL pointers.
2018-07-13 22:08:23 +02:00
efc81331e7
patch 8.1.0179: redundant condition for boundary check
...
Problem: Redundant condition for boundary check.
Solution: Remove the condition. (Dominique Pelle). Change FALSE to FAIL.
2018-07-13 16:31:19 +02:00
e76c4b237d
patch 8.1.0178: warning for passing pointer to non-pointer argument
...
Problem: Warning for passing pointer to non-pointer argument.
Solution: Use zero instead of NULL.
2018-07-11 22:57:54 +02:00
93343725b5
patch 8.1.0177: defining function in sandbox is inconsistent
...
Problem: Defining function in sandbox is inconsistent, cannot use :function
but can define a lambda.
Solution: Allow defining a function in the sandbox, but also use the sandbox
when executing it. (closes #3182 )
2018-07-10 19:39:18 +02:00
18085fae74
patch 8.1.0176: overlapping string argument for strcpy()
...
Problem: Overlapping string argument for strcpy(). (Coverity)
Solution: Use STRMOVE() instead of STRCPY(). (Dominique Pelle, closes #3187 )
2018-07-10 17:33:45 +02:00
bde14d8e24
patch 8.1.0175: marks test fails in very wide window
...
Problem: Marks test fails in very wide window. (Vladimir Lomov)
Solution: Extend the text to match 'columns'. (closes #3180 , closes #3181 )
2018-07-10 15:22:32 +02:00
907dad72ef
patch 8.1.0174: after paging up and down fold line is wrong
...
Problem: After paging up and down fold line is wrong.
Solution: Correct the computation of w_topline and w_botline. (Hirohito
Higashi)
2018-07-10 15:07:15 +02:00
6259e5769d
patch 8.1.0173: compiler warning on MS-Windows
...
Problem: Compiler warning on MS-Windows.
Solution: Add type cast. (Mike Williams)
2018-07-09 20:39:17 +02:00
c229e54a69
patch 8.1.0172: 'viminfofile' option does not behave like a file name
...
Problem: 'viminfofile' option does not behave like a file name.
Solution: Add the P_EXPAND flag. (closes #3178 )
2018-07-08 21:46:56 +02:00
875cf87894
patch 8.1.0171: typing CTRL-W n in a terminal window causes ml_get error
...
Problem: Typing CTRL-W n in a terminal window causes ml_get error.
Solution: When resizing the terminal outside of terminal_loop() make sure
the snapshot is complete.
2018-07-08 20:49:07 +02:00
2338c32b53
patch 8.1.0170: invalid memory use with complicated pattern
...
Problem: Invalid memory use with complicated pattern. (Andy Massimino)
Solution: Reallocate the list of listids when needed. (closes #3175 )
Remove unnecessary function prototypes.
2018-07-08 19:07:19 +02:00
a9defadb8f
patch 8.1.0169: calling message_filtered() a bit too often
...
Problem: Calling message_filtered() a bit too often.
Solution: Only call message_filtered() when filtering is already false.
2018-07-08 18:20:24 +02:00
9d5185bf9d
patch 8.1.0168: output of :marks is too short with multi-byte chars
...
Problem: Output of :marks is too short with multi-byte chars. (Tony
Mechelynck)
Solution: Get more bytes from the text line.
2018-07-08 17:57:34 +02:00
c89d4b3530
patch 8.1.0167: lock flag in new dictitem is reset in many places
...
Problem: Lock flag in new dictitem is reset in many places.
Solution: Always reset the lock flag.
2018-07-08 17:19:02 +02:00
e0be167a80
patch 8.1.0166: using dict_add_nr_str() is clumsy
...
Problem: Using dict_add_nr_str() is clumsy.
Solution: Split into two functions. (Ozaki Kiichi, closes #3154 )
2018-07-08 16:50:37 +02:00
4cde86c2ef
patch 8.1.0165: :clist output can be very long
...
Problem: :clist output can be very long.
Solution: Support filtering :clist entries. (Yegappan Lakshmanan)
2018-07-08 16:01:08 +02:00
fd35811ca5
Update runtime files, add Danish translations.
2018-07-07 23:21:31 +02:00
fe08df452a
patch 8.1.0164: luaeval('vim.buffer().name') returns an error
...
Problem: luaeval('vim.buffer().name') returns an error.
Solution: Return an empty string. (Dominique Pelle, closes #3167 )
2018-07-07 23:07:41 +02:00
2549acf794
patch 8.1.0163: insufficient testing for Tcl
...
Problem: Insufficient testing for Tcl.
Solution: Add a few more tests. (Dominique Pelle, closes #3166 )
2018-07-07 22:42:01 +02:00
08505312fe
patch 8.1.0162: Danish and German man pages are not installed
...
Problem: Danish and German man pages are not installed. (Tony Mechelynck)
Solution: Adjust the makefile
2018-07-07 22:26:54 +02:00
386bc82a3f
patch 8.1.0161: buffer not updated with 'autoread' set if file was deleted
...
Problem: Buffer not updated with 'autoread' set if file was deleted.
(Michael Naumann)
Solution: Don't set the timestamp to zero. (closes #3165 )
2018-07-07 18:34:12 +02:00
cbbe4ab4b2
patch 8.1.0160: no Danish manual translations
...
Problem: No Danish manual translations.
Solution: Add the Danish manual translations to the file list.
2018-07-07 17:21:55 +02:00
6c5d104302
patch 8.1.0159: completion for user names does not work for a prefix.
...
Problem: Completion for user names does not work if a prefix is also a full
matching name. (Nazri Ramliy)
Solution: Accept both full and partial matches. (Dominique Pelle)
2018-07-07 16:41:13 +02:00
1ebff3dc93
patch 8.1.0158: GUI: input() fails if CTRL-C was pressed before
...
Problem: GUI: input() fails if CTRL-C was pressed before. (Michael Naumann)
Solution: call vpeekc() to drop the CTRL-C from the input stream.
2018-07-07 16:18:13 +02:00
e330ef42f2
patch 8.1.0157: old iTerm2 is not recognized, resulting in stray output
...
Problem: Old iTerm2 is not recognized, resulting in stray output.
Solution: Recognize the termresponse.
2018-07-06 23:11:40 +02:00
5d2f40792e
patch 8.1.0156: MS-Windows compiler warning
...
Problem: MS-Windows compiler warning.
Solution: Add a type cast. (Mike Williams)
2018-07-06 22:52:02 +02:00
ae728edc93
patch 8.1.0155: evim.man missing from the distribution
...
Problem: Evim.man missing from the distribution.
Solution: Add it to the list.
2018-07-05 22:58:17 +02:00
c9fe5ab3b0
patch 8.1.0154: crash with "set smarttab shiftwidth=0 softtabstop=-1"
...
Problem: Crash with "set smarttab shiftwidth=0 softtabstop=-1".
Solution: Fall back to using 'tabstop'. (closes #3155 )
2018-07-05 22:27:08 +02:00
e85ce6ea2e
patch 8.1.0153: build with SHADOWDIR fails
...
Problem: Build with SHADOWDIR fails. (Elimar Riesebieter)
Solution: Create a link for Make_all.mak. (Tony Mechelynck)
2018-07-05 17:11:24 +02:00
f3dc235576
patch 8.1.0152: cannot easily run individual tests on MS-Windows
...
Problem: Cannot easily run individual tests on MS-Windows.
Solution: Move the list of tests to a separate file. Add a build rule in
the MSVC makefile.
2018-07-04 23:05:34 +02:00
81e2ac7bb6
patch 8.1.0151: mksession test fails on MS-Windows
...
Problem: Mksession test fails on MS-Windows.
Solution: Always use an argument for :lcd.
2018-07-04 22:44:08 +02:00
fd34cebe9a
patch 8.1.0150: insufficient test coverage for Tcl
...
Problem: Insufficient test coverage for Tcl.
Solution: Add more tests. (Dominique Pelle, closes #3140 )
2018-07-04 22:36:46 +02:00
26d4b896a7
patch 8.1.0149: session is wrong with multiple tabs when :lcd was used
...
Problem: The generated sessions file does not restore tabs properly if :lcd
was used in one of them.
Solution: Create the tab pages before setting the directory. (Yee Cheng
Chin, closes #3152 )
2018-07-04 22:26:28 +02:00
92959fa46d
patch 8.1.0148: memory leak when using :tcl expr command
...
Problem: Memory leak when using :tcl expr command.
Solution: Free the result of expression evaluation. (Dominique Pelle,
closes #3150 )
2018-07-04 22:12:25 +02:00
3b48b11c07
patch 8.1.0147: compiler warning when building with Python 3.7
...
Problem: Compiler warning when building with Python 3.7.
Solution: #undef PySlice_GetIndicesEx before redefining it. (Ozaki Kiichi,
closes #3153 )
2018-07-04 22:03:25 +02:00
f0447e89a5
patch 8.1.0146: when $LANG is set the compiler test may fail
...
Problem: When $LANG is set the compiler test may fail.
Solution: Unset $LANG.
2018-07-03 21:26:38 +02:00
851332ea9c
patch 8.1.0145: test with grep is failing on MS-Windows
...
Problem: Test with grep is failing on MS-Windows.
Solution: Skip the test.
2018-07-03 19:16:00 +02:00
b2e0c94a4d
patch 8.1.0144: the :cd command does not have good test coverage
...
Problem: The :cd command does not have good test coverage.
Solution: Add more tests. (Dominique Pelle, closes #2972 )
2018-07-03 18:36:27 +02:00
3d1d6475f9
patch 8.1.0143: matchit and matchparen don't handle E363
...
Problem: Matchit and matchparen don't handle E363.
Solution: Catch the E363 error. (Christian Brabandt)
2018-07-03 18:18:23 +02:00
e6882bdc44
patch 8.1.0142: xterm and vt320 builtin termcap missing keypad keys
...
Problem: Xterm and vt320 builtin termcap missing keypad keys.
Solution: Add the escape sequences. (Kouichi Iwamoto, closes #2973 )
2018-07-03 17:16:59 +02:00
531b9a3a63
patch 8.1.0141: :cexpr no longer jumps to the first error
...
Problem: :cexpr no longer jumps to the first error.
Solution: Use the quickfix list identifier. (Yegappan Lakshmanan,
closes #3092 )
2018-07-03 16:54:23 +02:00
6dc819b129
Updated runtime and language files.
2018-07-03 16:42:19 +02:00
972bfddc6b
patch 8.1.0140: recording into a register has focus events
...
Problem: Recording into a register has focus events. (Michael Naumann)
Solution: Don't record K_FOCUSGAINED and K_FOCUSLOST. (closes #3143 )
2018-07-03 14:48:15 +02:00
a8a60d0c6b
patch 8.1.0139: Lua tests fail on some platforms
...
Problem: Lua tests fail on some platforms.
Solution: Accept a hex number with and without "0x". (Ken Takata,
closes #3137 )
2018-07-02 22:54:36 +02:00
33d5ab3795
patch 8.1.0138: negative value of 'softtabstop' not used correctly
...
Problem: Negative value of 'softtabstop' not used correctly.
Solution: Use get_sts_value(). (Tom Ryder)
2018-07-02 20:51:24 +02:00
ade5578797
patch 8.1.0137: CI does not run with TCL
...
Problem: CI does not run with TCL.
Solution: Add TCL to the travis config. (Dominique Pelle, closes #3133 )
2018-07-01 21:12:55 +02:00
2f362bf7f9
patch 8.1.0136: Lua tests don't cover new features
...
Problem: Lua tests don't cover new features.
Solution: Add more tests. (Dominique Pelle, closes #3130 )
2018-07-01 19:49:27 +02:00
e0429681ae
patch 8.1.0135: undo message delays screen update for CTRL-O u
...
Problem: Undo message delays screen update for CTRL-O u.
Solution: Add smsg_attr_keep(). (closes #3125 )
2018-07-01 16:44:03 +02:00
ca06da9243
patch 8.1.0134: Lua interface does not support funcref
...
Problem: Lua interface does not support funcref.
Solution: Add funcref support. (Luis Carvalho)
2018-07-01 15:12:05 +02:00
ffd112edc6
Fix missing patch number.
2018-07-01 14:22:31 +02:00
46577b5e54
patch 8.1.0133: tagfiles() can have duplicate entries
...
Problem: tagfiles() can have duplicate entries.
Solution: Simplify the filename to make checking for duplicates work better.
Add a test. (Dominique Pelle, closes #2979 )
2018-06-30 22:40:42 +02:00
4ff4814b38
patch 8.1.0132: lua tests are old style
...
Problem: Lua tests are old style.
Solution: Convert to new style tests. Improve coverage. (Dominique Pelle,
closes #3091 )
2018-06-30 21:50:25 +02:00
1fbfe7c48c
patch 8.1.0131: :profdel is not tested
...
Problem: :profdel is not tested.
Solution: Add a test. (Dominique Pelle, closes #3123 )
2018-06-30 21:18:13 +02:00
ad64809610
patch 8.1.0130: ":profdel func" does not work if func was called already
...
Problem: ":profdel func" does not work if func was called already.
(Dominique Pelle)
Solution: Reset uf_profiling and add a flag to indicate initialization was
done.
2018-06-30 18:28:03 +02:00
668324ef4f
patch 8.1.0129: still some xterm-like terminals get a stray "p"
...
Problem: Still some xterm-like terminals get a stray "p" on startup.
Solution: Consider all terminals that reply with a version smaller than 95
as not an xterm. (James McCoy)
2018-06-30 17:09:26 +02:00
304925e750
patch 8.1.0128: building with MinGW does not work out-of-the-box
...
Problem: Building with MinGW does not work out-of-the-box.
Solution: Add instructions for MSYS2. Set default WINVER. Add batch files
to set $PATH for MSYS2.
2018-06-30 16:27:02 +02:00
7c365fb190
patch 8.1.0127: build failure when disabling the session feature
...
Problem: Build failure when disabling the session feature. (Pawel Slowik)
Solution: Adjust #ifdef for vim_chdirfile().
2018-06-29 20:28:31 +02:00
307ac5c68e
patch 8.1.0126: various problems with 'vartabstop'
...
Problem: Various problems with 'vartabstop'.
Solution: Fix memory leak. Fix crash. Add a few more tests. (Christian
Brabandt, closes #3076 )
2018-06-28 22:23:00 +02:00
630afe889a
patch 8.1.0125: virtual edit replace with multi-byte fails at end of line
...
Problem: Virtual edit replace with multi-byte fails at end of line. (Lukas
Werling)
Solution: use ins_char() to add the character. (Christian Brabandt,
closes #3114 ) Rename PCHAR() to PBYTE() to avoid mistakes like
this.
2018-06-28 19:26:28 +02:00
d8b37a53bd
patch 8.1.0124: has('vcon') returns true even for non-win32 terminal
...
Problem: has('vcon') returns true even for non-win32 terminal.
Solution: Check the terminal type. (Nobuhiro Takasaki, closes #3106 )
2018-06-28 15:50:28 +02:00
b0eb14f939
patch 8.1.0123: MS-Windows: colors are wrong after setting 'notgc'
...
Problem: MS-Windows: colors are wrong after setting 'notgc'.
Solution: Only call control_console_color_rgb() for the win32 terminal.
(Nobuhiro Takasaki, closes #3107 )
2018-06-28 15:29:52 +02:00
0c18319872
patch 8.1.0122: translators don't always understand the maintainer message
...
Problem: Translators don't always understand the maintainer message.
Solution: Add a comment that ends up in the generated po file. (Christian
Brabandt, closes #3037 )
2018-06-28 14:54:43 +02:00
ca4b613c69
patch 8.1.0121: crash when using ballooneval related to 'vartabstop'
...
Problem: Crash when using ballooneval related to 'vartabstop'.
Solution: Initialize balloonEval->vts to NULL. (Markus Braun)
2018-06-28 12:05:11 +02:00
dc9e955fb0
patch 8.1.0120: buffer 'modified' set even when :sort has no changes
...
Problem: Buffer 'modified' set even when :sort has no changes.
Solution: Only set 'modified' when lines are moved. (Jason Franklin)
2018-06-28 11:28:08 +02:00
ec12d64909
patch 8.1.0119: failing test goes unnoticed because messages is not written
...
Problem: Failing test goes unnoticed because testdir/messages is not
written.
Solution: Set 'nomodifiable' only local to the buffer.
2018-06-27 23:12:36 +02:00
f52f9ea8f5
patch 8.1.0118: duplicate error message for put command
...
Problem: Duplicate error message for put command.
Solution: Check return value of u_save(). (Jason Franklin)
2018-06-27 20:49:44 +02:00
bd87eb38c5
patch 8.1.0117: URL in install program still points to SourceForge
...
Problem: URL in install program still points to SourceForge.
Solution: Change it to www.vim.org. (closes #3100 )
2018-06-26 23:18:45 +02:00
a87b72cc31
patch 8.1.0116: display problem with 'vartabstop' and 'linebreak'
...
Problem: Display problem with 'vartabstop' and 'linebreak'. (Chauca
Fuentes)
Solution: Call tabstop_padding(). (Christian Brabandt, closes #3076 )
2018-06-25 21:24:51 +02:00
b7a5ab112a
patch 8.1.0115: the matchparen plugin may throw an error
...
Problem: The matchparen plugin may throw an error.
Solution: Change the skip argument from zero to "0".
2018-06-25 00:05:59 +02:00
0119a59ffd
patch 8.1.0114: confusing variable name
...
Problem: Confusing variable name.
Solution: Rename new_ts to new_vts_array. Change zero to NULL.
2018-06-24 23:53:28 +02:00
675e8d6adb
Update runtime files.
2018-06-24 20:42:01 +02:00
829adb7460
patch 8.1.0113: compiler warning for unused variable
...
Problem: Compiler warning for unused variable. (Yegappan Lakshmanan)
Solution: Add UNUSED. (Christian Brabandt)
2018-06-24 19:24:03 +02:00
3dddb09c98
patch 8.1.0112: no error when using bad arguments with searchpair()
...
Problem: No error when using bad arguments with searchpair().
Solution: Add error messages.
2018-06-24 19:01:59 +02:00
d1d037e901
patch 8.1.0111: .po files do not use recommended names
...
Problem: .po files do not use recommended names.
Solution: Give a warning if the recommended name is not used. Accept the
recommended name for conversion. (Christian Brabandt, Ken Takata)
2018-06-24 18:04:50 +02:00
fc0896093c
patch 8.1.0110: file name not displayed with ":file"
...
Problem: File name not displayed with ":file" when 'F' is in 'shortmess'.
Solution: Always display the file name when there is no argument (Christian
Brabandt, closes #3070 )
2018-06-24 16:53:35 +02:00
7cb6eecd32
patch 8.1.0109: new po makefile missing from distribution
...
Problem: New po makefile missing from distribution.
Solution: Add it to the file list.
2018-06-24 15:56:24 +02:00
a4a2934e59
patch 8.1.0108: no Danish translations
...
Problem: No Danish translations.
Solution: Add Danish message translations. (closes #3073 ) Move list of
languages to a common makefile.
2018-06-24 15:52:56 +02:00
defe6424ae
patch 8.1.0107: Python: getting buffer option clears message
...
Problem: Python: getting buffer option clears message. (Jacob Niehus)
Solution: Don't use aucmd_prepbuf(). (closes #3079 )
2018-06-24 15:14:07 +02:00
eee3e94669
patch 8.1.0106: build fails when HAVE_DATE_TIME is undefined
...
Problem: Build fails when HAVE_DATE_TIME is undefined.
Solution: Always define init_longVersion(). (Christian Brabandt,
closes #3075 )
2018-06-24 14:44:46 +02:00
04958cbaf2
patch 8.1.0105: all tab stops are the same
...
Problem: All tab stops are the same.
Solution: Add the variable tabstop feature. (Christian Brabandt,
closes #2711 )
2018-06-23 19:23:02 +02:00
5ec7414a1c
patch 8.1.0104: can't build without the +eval feature
...
Problem: Can't build without the +eval feature.
Solution: Add #ifdef.
2018-06-23 17:14:41 +02:00
35fb6fbf72
patch 8.1.0103: long version string cannot be translated
...
Problem: Long version string cannot be translated.
Solution: Build the string in init_longVersion().
2018-06-23 16:12:21 +02:00
1f8c469fe2
patch 8.1.0102: cannot build without syntax highlighting
...
Problem: Cannot build without syntax highlighting.
Solution: Add #ifdef around using reg_do_extmatch.
2018-06-23 15:09:10 +02:00
81612b7a7d
patch 8.1.0101: no test for getcmdwintype()
...
Problem: No test for getcmdwintype().
Solution: Add a test. (Dominique Pelle, closes #3068 )
2018-06-23 14:55:03 +02:00
6dccc962f3
patch 8.1.0100: terminal debugger: error when setting a watch point
...
Problem: Terminal debugger: error when setting a watch point.
Solution: Don't try defining a sign for a watch point.
2018-06-23 14:36:17 +02:00
3c867daaf0
patch 8.1.0099: exclamation mark in error message not needed
...
Problem: Exclamation mark in error message not needed.
Solution: Remove the exclamation mark.
2018-06-23 14:34:28 +02:00
bcf9442307
patch 8.1.0098: segfault when pattern with \z() is very slow
...
Problem: Segfault when pattern with \z() is very slow.
Solution: Check for NULL regprog. Add "nfa_fail" to test_override() to be
able to test this. Fix that 'searchhl' resets called_emsg.
2018-06-23 14:21:42 +02:00
5efa0102de
patch 8.1.0097: superfluous space before exclamation mark
...
Problem: Superfluous space before exclamation mark.
Solution: Remove the space. Don't translate debug message.
2018-06-22 21:42:30 +02:00
8c55533c6f
patch 8.1.0096: inconsistent use of the word autocommands
...
Problem: Inconsistent use of the word autocommands.
Solution: Don't use auto-commands or "auto commands".
2018-06-22 21:30:31 +02:00
39902a06d9
patch 8.1.0095: dialog for ":browse tabnew" says "new window"
...
Problem: Dialog for ":browse tabnew" says "new window".
Solution: Use "new tab page". (closes #3053 )
2018-06-21 22:10:08 +02:00
32aaf5ae07
patch 8.1.0094: help text "usage:" is not capatalized
...
Problem: Help text "usage:" is not capatalized.
Solution: Make it "Usage:". (closes #3044 )
2018-06-21 21:38:33 +02:00
2ed890f1f8
patch 8.1.0093: non-MS-Windows: Cannot interrupt gdb when program is running
...
Problem: non-MS-Windows: Cannot interrupt gdb when program is running.
Solution: Only use debugbreak() on MS-Windows.
2018-06-21 20:31:14 +02:00
71ef1ba5e9
patch 8.1.0092: prompt buffer test fails
...
Problem: Prompt buffer test fails.
Solution: Set 'nomodified' before closing the window. (Ozaki Kiichi,
closes #3051
2018-06-21 12:07:04 +02:00
4551c0a9fc
patch 8.1.0091: MS-Windows: Cannot interrupt gdb when program is running
...
Problem: MS-Windows: Cannot interrupt gdb when program is running.
Solution: Add debugbreak() and use it in the terminal debugger.
Respect 'modified' in a prompt buffer.
2018-06-20 22:38:21 +02:00
9b0c5c23bd
patch 8.1.0090: "..." used inconsistently in a message
...
Problem: "..." used inconsistently in a message.
Solution: Define the message with " ..." once. (hint by Ken Takata)
2018-06-20 20:37:36 +02:00
a15b0a936d
patch 8.1.0089: error when ending the terminal debugger
...
Problem: error when ending the terminal debugger
Solution: Fix deleting defined signs for breakpoints. Make the debugger
work better on MS-Windows.
2018-06-19 22:34:46 +02:00
5319191a2a
patch 8.1.0088: terminal test for stdout and stderr is a bit flaky
...
Problem: Terminal test for stdout and stderr is a bit flaky.
Solution: Wait for both stdout and stderr to have been processed. (Ozaki
Kiichi, closes #2991 )
2018-06-19 20:08:14 +02:00
f9c3883b11
patch 8.1.0087: v:shell_error is always zero when using terminal for "!cmd"
...
Problem: v:shell_error is always zero when using terminal for "!cmd".
Solution: Use "exitval" of terminal-job. (Ozaki Kiichi, closes #2994 )
2018-06-19 19:59:20 +02:00
1ceebb4efc
patch 8.1.0086: no tests for libcall() and libcallnr()
...
Problem: No tests for libcall() and libcallnr().
Solution: Add tests. (Dominique Pelle, closes #2982 )
2018-06-19 19:46:06 +02:00
5f8f2d378a
patch 8.1.0085: no test for completing user name and language
...
Problem: No test for completing user name and language.
Solution: Add tests. (Dominique Pelle, closes #2978 )
2018-06-19 19:09:09 +02:00
828c3d7083
patch 8.1.0084: user name completion does not work on MS-Windows
...
Problem: User name completion does not work on MS-Windows.
Solution: Use NetUserEnum() to get user names. (Yasuhiro Matsumoto)
2018-06-19 18:58:07 +02:00
8516071124
patch 8.1.0083: "is" and "as" have trouble with quoted punctuation
...
Problem: "is" and "as" have trouble with quoted punctuation.
Solution: Check for punctuation before a quote. (Jason Franklin)
2018-06-19 18:27:41 +02:00
1d4754f96f
patch 8.1.0082: in terminal window, typing : at more prompt, inserts ':'
...
Problem: In terminal window, typing : at more prompt, inserts ':' instead
of starting another Ex command.
Solution: Add skip_term_loop and set it when putting ':' in the typeahead
buffer.
2018-06-19 17:49:24 +02:00
f07f9e731e
patch 8.1.0081: the terminal debugger doesn't adjust to changed 'background'
...
Problem: The terminal debugger doesn't adjust to changed 'background'.
Solution: Add an OptionSet autocommand. (Christian Brabandt)
2018-06-19 17:27:53 +02:00
de1a83147a
patch 8.1.0080: can't see the breakpoint number in the terminal debugger
...
Problem: Can't see the breakpoint number in the terminal debugger.
Solution: Use the breakpoint number for the sign. (Christian Brabandt)
2018-06-19 16:59:54 +02:00
8df6e5d467
patch 8.1.0079: superfluous space in messages
...
Problem: Superfluous space in messages.
Solution: Remove the spaces. (closes #3030 )
2018-06-19 14:45:37 +02:00
d2f3a8b878
Update runtime files.
2018-06-19 14:35:59 +02:00
c166927a32
patch 8.1.0078: "..." used inconsistently in messages
...
Problem: "..." used inconsistently in messages.
Solution: Drop the space before " ...".
2018-06-19 14:23:53 +02:00
5c3670718b
patch 8.1.0077: header of README file is not nice
...
Problem: Header of README file is not nice.
Solution: Move text to the bottom.
2018-06-18 22:31:11 +02:00
0ce7413a83
patch 8.1.0076: command getting cleared with CTRL-W : in a terminal window
...
Problem: Command getting cleared with CTRL-W : in a terminal window. (Jason
Franklin)
Solution: Call redraw_after_callback() when editing the command line.
2018-06-18 22:15:50 +02:00
252b7ee823
patch 8.1.0075: no Vim logo in README file
...
Problem: No Vim logo in README file.
Solution: Add one. (Árni Dagur, closes #3024 )
2018-06-18 22:00:22 +02:00
d6b01a2d38
patch 8.1.0074: crash when running quickfix tests
...
Problem: Crash when running quickfix tests.
Solution: Do not alloc a new location list when checking for the reference
to be still valid.
2018-06-18 21:53:28 +02:00
0366c0161e
patch 8.1.0073: crash when autocommands call setloclist()
...
Problem: Crash when autocommands call setloclist(). (Dominique Pelle)
Solution: If the quickfix list changes then don't jump to the error.
2018-06-18 20:52:13 +02:00
dcdeaaf150
patch 8.1.0072: use of 'termwinkey' is inconsistent
...
Problem: Use of 'termwinkey' is inconsistent.
Solution: Change the documentation and the behavior. (Ken Takata)
2018-06-17 22:19:12 +02:00
b3307b5e7e
patch 8.1.0071: terminal debugger only works with the terminal feature
...
Problem: Terminal debugger only works with the terminal feature.
Solution: Make it also work with a prompt buffer. Makes it possible to use
on MS-Windows. Various other improvements. (closes #3012 )
2018-06-17 21:34:11 +02:00
222cd20e26
patch 8.1.0070: missing part of the changes for prompt_setinterrupt()
...
Problem: Missing part of the changes for prompt_setinterrupt().
Solution: Add the missing changes.
2018-06-17 20:10:39 +02:00
0e5979a6d4
patch 8.1.0069: cannot handle pressing CTRL-C in a prompt buffer
...
Problem: Cannot handle pressing CTRL-C in a prompt buffer.
Solution: Add prompt_setinterrupt().
2018-06-17 19:36:33 +02:00
2f82ca7d79
patch 8.1.0068: nasty autocommands can still cause using freed memory
...
Problem: Nasty autocommands can still cause using freed memory.
Solution: Disallow using setloclist() and setqflist() recursively.
2018-06-17 19:22:52 +02:00
a5616b0136
patch 8.1.0067: syntax highlighting not working when re-entering a buffer
...
Problem: Syntax highlighting not working when re-entering a buffer.
Solution: Do force executing autocommands when not called recursively.
2018-06-17 19:08:30 +02:00
c3ffc9b8d3
patch 8.1.0066: nasty autocommand causes using freed memory
...
Problem: Nasty autocommand causes using freed memory. (Dominique Pelle)
Solution: Do not force executing autocommands if the value of 'syntax' or
'filetype' did not change.
2018-06-17 17:32:58 +02:00
0e6e179f55
patch 8.1.0065: balloon displayed at the wrong position
...
Problem: Balloon displayed at the wrong position.
Solution: Do not reposition the popup menu at the cursor position.
2018-06-17 17:10:59 +02:00
942b4541a2
patch 8.1.0064: typing CTRL-W in a prompt buffer shows mode "-- --"
...
Problem: Typing CTRL-W in a prompt buffer shows mode "-- --".
Solution: Set restart_edit to 'A' and check for it.
2018-06-17 16:23:34 +02:00
d595a1910c
patch 8.1.0063: Mac: NSStringPboardType is deprecated
...
Problem: Mac: NSStringPboardType is deprecated.
Solution: Use NSPasteboardTypeString. (Akshay Hegde, closes #3022 )
2018-06-17 15:01:04 +02:00
491ac28d5f
patch 8.1.0062: popup menu broken if a callback changes the window layout
...
Problem: Popup menu broken if a callback changes the window layout. (Qiming
Zhao)
Solution: Recompute the popup menu position if needed. Redraw the ruler
even when the popup menu is displayed.
2018-06-17 14:47:55 +02:00
84a9308511
patch 8.1.0061: window title is wrong after resetting and setting 'title'
...
Problem: Window title is wrong after resetting and setting 'title'.
Solution: Move resetting the title into maketitle(). (Jason Franklin)
2018-06-16 22:58:15 +02:00
600323b4ef
patch 8.1.0060: crash when autocommands delete the current buffer
...
Problem: Crash when autocommands delete the current buffer. (Dominique
Pelle)
Solution: Check that autocommands don't change the buffer.
2018-06-16 22:16:47 +02:00
bc5020aa4d
patch 8.1.0059: displayed digraph for "ga" wrong with 'encoding' "cp1251"
...
Problem: Displayed digraph for "ga" wrong with 'encoding' "cp1251".
Solution: Convert from 'encoding' to "utf-8" if needed. (closes #3015 )
2018-06-16 17:25:22 +02:00
bfa4246768
patch 8.1.0058: display problem with margins and scrolling
...
Problem: Display problem with margins and scrolling.
Solution: Place the cursor in the right column. (Kouichi Iwamoto,
closes #3016 )
2018-06-16 16:20:52 +02:00
6ba3ec1bac
patch 8.1.0057: popup menu displayed wrong when using autocmd
...
Problem: Popup menu displayed wrong when using autocmd.
Solution: Use aucmd_prepbuf(). Force updating status line if the popup menu
is going to be redrawn anyway. (Christian Brabandt, closes #3009 )
2018-06-16 15:32:38 +02:00
43dee181f5
patch 8.1.0056: crash when using :hardcopy with illegal byte
...
Problem: Crash when using :hardcopy with illegal byte.
Solution: Check for string_convert() returning NULL. (Dominique Pelle)
2018-06-16 14:44:11 +02:00
52d3aaeea4
patch 8.1.0055: complete test has wrong order of arguments
...
Problem: Complete test has wrong order of arguments. Wrong type for
sentinel variable.
Solution: Swap arguments, use VAR_UNKNOWN. (Ozaki Kiichi)
2018-06-13 21:27:24 +02:00
5ecdf96422
patch 8.1.0054: compiler warning for using %ld for "long long"
...
Problem: Compiler warning for using %ld for "long long".
Solution: Add a type cast. (closes #3002 )
2018-06-13 20:49:50 +02:00
ffa9684150
patch 8.1.0053: first argument of 'completefunc' has inconsistent type
...
Problem: The first argument given to 'completefunc' can be Number or
String, depending on the value.
Solution: Avoid guessing the type of an argument, use typval_T in the
callers of call_vim_function(). (Ozaki Kiichi, closes #2993 )
2018-06-12 22:05:14 +02:00
83f4cbd973
patch 8.1.0052: when mapping to <Nop> times out the next mapping is skipped
...
Problem: When a mapping to <Nop> times out the next mapping is skipped.
Solution: Reset "timedout" when waiting for a character. (Christian
Brabandt, closes #2921 )
2018-06-12 21:35:40 +02:00
79c6b51e40
patch 8.1.0051: MS-Windows: missing #endif
...
Problem: MS-Windows: missing #endif.
Solution: Add the #endif.
2018-06-12 21:11:12 +02:00
493359eb3b
patch 8.1.0050: $VIM_TERMINAL is also set when not in a terminal window
...
Problem: $VIM_TERMINAL is also set when not in a terminal window.
Solution: Pass a flag to indicate whether the job runs in a terminal.
2018-06-12 20:25:52 +02:00
d7a137fb0d
patch 8.1.0049: shell cannot tell running in a terminal window
...
Problem: Shell cannot tell running in a terminal window.
Solution: Add the VIM_TERMINAL environment variable. (Christian Brabandt)
2018-06-12 18:05:24 +02:00
07ccf7ce7f
patch 8.1.0048: vim_str2nr() does not handle numbers close to the maximum
...
Problem: vim_str2nr() does not handle numbers close to the maximum.
Solution: Check for overflow more precisely. (Ken Takata, closes #2746 )
2018-06-12 17:25:36 +02:00
1983401088
patch 8.1.0047: no completion for :unlet $VAR
...
Problem: No completion for :unlet $VAR.
Solution: Add completion. (Jason Franklin)
2018-06-12 17:03:39 +02:00
1c3c10492a
patch 8.1.0046: loading a session file fails if 'winheight' is big
...
Problem: Loading a session file fails if 'winheight' is a big number.
Solution: Set 'minwinheight' to zero at first. Don't give an error when
setting 'minwinheight' while 'winheight' is a big number.
Fix using vertical splits. Fix setting 'minwinwidth'.
(closes #2970 )
2018-06-12 16:49:30 +02:00
ae0f30b761
patch 8.1.0045: popup test isn't run completely
...
Problem: Popup test isn't run completely.
Solution: Remove "finish". Clean up function definitions.
2018-06-12 15:22:43 +02:00
8903676d3d
patch 8.1.0044: if a test function exists Vim this may go unnoticed
...
Problem: If a test function exists Vim this may go unnoticed.
Solution: Check for a test funtion quitting Vim. Fix tests that did exit
Vim.
2018-06-12 14:58:39 +02:00
7580849df9
patch 8.1.0043: ++bad argument of :edit does not work properly
...
Problem: ++bad argument of :edit does not work properly.
Solution: Return FAIL from get_bad_opt() only when there is no valid
argument. (Dominique Pelle, Christian Brabandt, closes #2966 ,
closes #2947 )
2018-06-12 12:39:41 +02:00
f98b845dd1
patch 8.1.0042: if omni completion opens a window Insert mode is stopped
...
Problem: If omni completion opens a window Insert mode is stopped.
(Hirohito Higashi)
Solution: Only set stop_insert_mode in a prompt buffer window.
2018-06-10 14:39:52 +02:00
e950f9992b
patch 8.1.0041: attribute "width" missing from python window attribute list
...
Problem: Attribute "width" missing from python window attribute list.
Solution: Add the item. (Ken Takata) Order the list like the items are used
in the WindowAttr() function.
2018-06-10 13:55:55 +02:00
e31e256ba1
patch 8.1.0040: warnings from 64-bit compiler
...
Problem: Warnings from 64-bit compiler.
Solution: Add type casts. (Mike Williams)
2018-06-10 13:12:55 +02:00
d79a26219d
patch 8.1.0039: cannot easily delete lines in another buffer
...
Problem: Cannot easily delete lines in another buffer.
Solution: Add deletebufline().
2018-06-07 18:17:46 +02:00
680c99b2ef
patch 8.1.0038: popup test causes Vim to exit
...
Problem: Popup test causes Vim to exit.
Solution: Disable the broken part of the test for now.
2018-06-07 15:18:41 +02:00
ca851593a6
patch 8.1.0037: cannot easily append lines to another buffer
...
Problem: Cannot easily append lines to another buffer.
Solution: Add appendbufline().
2018-06-06 21:04:07 +02:00
891e1fd894
patch 8.1.0036: not restoring Insert mode if leaving prompt buffer with mouse
...
Problem: Not restoring Insert mode if leaving a prompt buffer by using a
mouse click.
Solution: Set b_prompt_insert appropriately. Also correct cursor position
when moving cursor to last line.
2018-06-06 18:02:39 +02:00
6d41c78e35
patch 8.1.0035: not easy to switch between prompt buffer and other windows
...
Problem: Not easy to switch between prompt buffer and other windows.
Solution: Accept CTRL-W commands in Insert mode. Start and stop Insert mode
as one would expect.
2018-06-06 09:11:12 +02:00
adb8fbec4f
patch 8.1.0034: cursor not restored with ":edit #"
...
Problem: Cursor not restored with ":edit #".
Solution: Don't assume autocommands moved the cursor when it was moved to
the first non-blank.
2018-06-04 20:34:23 +02:00
acb9effecc
patch 8.1.0033: keys to stop Vim in terminal are wrong
...
Problem: Keys to stop Vim in terminal are wrong. (Marius Gedminas)
Solution: Move ":" to before CTRL-U.
2018-06-04 19:11:11 +02:00
6b810d92a9
patch 8.1.0032: BS in prompt buffer starts new line
...
Problem: BS in prompt buffer starts new line.
Solution: Do not allows BS over the prompt. Make term_sendkeys() handle
special keys. Add a test.
2018-06-04 17:28:44 +02:00
c8523e2e6c
patch 8.1.0031: terminal test aucmd_on_close if flaky
...
Problem: Terminal test aucmd_on_close if flaky.
Solution: Wait a bit longer.
2018-06-03 18:22:02 +02:00
3339d3dad9
patch 8.1.0030: stoping Vim running in a terminal may not work
...
Problem: Stoping Vim running in a terminal may not work.
Solution: Instead of sending <Esc> send CTRL-O.
2018-06-03 17:10:40 +02:00
1580f755c9
patch 8.1.0029: terminal test fails on MS-Windows when "wc" exists
...
Problem: Terminal test fails on MS-Windows when "wc" exists.
Solution: Skip test with redirection on MS-Windows.
2018-06-03 15:26:36 +02:00
1149382d21
patch 8.1.0028: prompt buffer test fails on MS-Windows
...
Problem: Prompt buffer test fails on MS-Windows.
Solution: Disable the test for now. Remove stray assert.
2018-06-03 15:08:09 +02:00
f273245f64
patch 8.1.0027: difficult to make a plugin that feeds a line to a job
...
Problem: Difficult to make a plugin that feeds a line to a job.
Solution: Add the nitial code for the "prompt" buftype.
2018-06-03 14:47:35 +02:00
33c5e9fa7a
patch 8.1.0026: terminal test fails with very tall terminal
...
Problem: Terminal test fails with very tall terminal. (Tom)
Solution: Fix the terminal window size in the test.
2018-05-26 18:58:51 +02:00
e5fa11186f
patch 8.1.0025: no test for the undofile() function
...
Problem: No test for the undofile() function.
Solution: Add test. (Dominique Pelle, closes #2958 )
2018-05-26 18:46:30 +02:00
6b69e5c646
patch 8.1.0024: % command not testded on #ifdef and comment
...
Problem: % command not testded on #ifdef and comment.
Solution: Add tests. (Dominique Pelle, closes #2956 )
2018-05-26 18:39:32 +02:00
22c105640c
patch 8.1.0023: gcc 8.1 warns for use of strncpy()
...
Problem: gcc 8.1 warns for use of strncpy(). (John Marriott)
Solution: Use mch_memmove() instead of STRNCPY().
2018-05-26 17:35:27 +02:00
833093bfb0
patch 8.1.0022: repeating put from expression register fails
...
Problem: Repeating put from expression register fails.
Solution: Re-evaluate the expression register. (Andy Massimino,
closes #2945 )
2018-05-23 21:53:52 +02:00
d315cf551f
patch 8.1.0021: clang warns for undefined behavior
...
Problem: Clang warns for undefined behavior.
Solution: Move #ifdef outside of sprintf() call.(suggestion by Michael
Jarvis, closes #2956 )
2018-05-23 20:30:56 +02:00
0b0f0992d4
Update runtime files.
2018-05-22 21:41:30 +02:00
0b6d911e5d
patch 8.1.0020: cannot tell whether a register is executing or recording
...
Problem: Cannot tell whether a register is being used for executing or
recording.
Solution: Add reg_executing() and reg_recording(). (Hirohito Higashi,
closes #2745 ) Rename the global variables for consistency. Store
the register name in reg_executing.
2018-05-22 20:35:17 +02:00
b4518563c7
patch 8.1.0019: error when defining a Lambda with index of a function result
...
Problem: Error when defining a Lambda with index of a function result.
Solution: When not evaluating an expression and skipping a function call,
set the return value to VAR_UNKNOWN.
2018-05-22 18:31:35 +02:00
bdb657924d
patch 8.1.0018: using "gn" may select wrong text when wrapping
...
Problem: Using "gn" may select wrong text when wrapping.
Solution: Avoid wrapping when searching forward. (Christian Brabandt)
2018-05-22 17:50:42 +02:00
62fe66f251
patch 8.1.0017: shell command completion has duplicates
...
Problem: Shell command completion has duplicates. (Yegappan Lakshmanan)
Solution: Use a hash table to avoid duplicates. (Ozaki Kiichi, closes #539 ,
closes #2733 )
2018-05-22 16:58:47 +02:00
d45aa55d42
patch 8.1.0016: possible crash in term_wait()
...
Problem: Possible crash in term_wait(). (Dominique Pelle)
Solution: Check for a valid buffer after ui_delay(). (closes #2944 )
2018-05-21 22:50:29 +02:00
05af9a4191
patch 8.1.0015: cursor color wrong when closing a terminal window
...
Problem: Cursor color wrong when closing a terminal window, ending up in
another terminal window. (Dominique Pelle)
Solution: Bail out of terminal_loop() when the buffer changes.
(closes #2942 )
2018-05-21 18:48:12 +02:00
6053f2d29a
patch 8.1.0014: qf_init_ext() is too long
...
Problem: qf_init_ext() is too long.
Solution: Split it into multiple functions. (Yegappan Lakshmanan,
closes #2939 )
2018-05-21 16:56:38 +02:00
4f7fd56b42
patch 8.1.0013: using freed memory when changing terminal cursor color
...
Problem: Using freed memory when changing terminal cursor color.
Solution: Make a copy of the color. (Dominique Pelle, closes #2938 ,
closes #2941 )
2018-05-21 14:55:28 +02:00
1f131aee0e
patch 8.1.0012: misplaced #endif
...
Problem: Misplaced #endif.
Solution: Move the #endif to after the expression. (David Binderman)
2018-05-21 13:39:40 +02:00
f88a5bc102
patch 8.1.0011: maparg() and mapcheck() confuse empty and non-existing
...
Problem: maparg() and mapcheck() confuse empty and non-existing.
Solution: Return <Nop> for an existing non-empty mapping. (closes #2940 )
2018-05-21 13:28:44 +02:00
6bff719f7e
patch 8.1.0010: efm_to_regpat() is too long
...
Problem: efm_to_regpat() is too long.
Solution: Split off three functions. (Yegappan Lakshmanan, closes #2924 )
2018-05-20 15:41:17 +02:00
dbe8869c41
patch 8.1.0009: tabpages insufficiently tested
...
Problem: Tabpages insufficiently tested.
Solution: Add more test coverage. (Dominique Pelle, closes #2934 )
2018-05-20 14:57:22 +02:00
42ab17b8e3
patch 8.1.0008: no test for strwidth()
...
Problem: No test for strwidth().
Solution: Add a test. (Dominique Pelle, closes #2931 )
2018-05-20 14:11:10 +02:00
2e94976abd
patch 8.1.0007: no test for "o" and "O" in Visual block mode
...
Problem: No test for "o" and "O" in Visual block mode.
Solution: Add a test. (Dominique Pelle, closes #2932 )
2018-05-20 14:06:38 +02:00
a772baf85a
patch 8.1.0006: syn_id2cterm_bg() may be undefined
...
Problem: syn_id2cterm_bg() may be undefined. (Axel Bender)
Solution: Adjust #ifdef.
2018-05-20 13:35:44 +02:00
d19b234154
patch 8.1.0005: test for :compiler command fails on MS-Windows
...
Problem: Test for :compiler command fails on MS-Windows.
Solution: Ignore difference in path.
2018-05-19 16:45:15 +02:00
54651f7494
patch 8.1.0004: test for :compiler command sometimes fails
...
Problem: Test for :compiler command sometimes fails.
Solution: Be less strict about the error message. (Dominique Pelle)
2018-05-19 15:52:11 +02:00
10561fe0a3
patch 8.1.0003: the :compiler command is not tested
...
Problem: The :compiler command is not tested.
Solution: Add a test. (Dominique Pelle, closes #2930 )
2018-05-19 15:01:10 +02:00
2abad54ced
patch 8.1.0002: :stopinsert changes the message position
...
Problem: :stopinsert changes the message position.
Solution: Save and restore msg_col and msg_row in clearmode(). (Jason
Franklin)
2018-05-19 14:43:45 +02:00
2f01889055
Runtime file and translation updates.
2018-05-18 18:12:06 +02:00
00e4556338
patch 8.1.0001: the netrw plugin does not work
...
Problem: The netrw plugin does not work.
Solution: Make it accept version 8.x.
2018-05-17 23:40:05 +02:00
b1c9198afb
Vim 8.1 release
...
Update version number and information. Fix a couple of tests.
2018-05-17 17:04:55 +02:00
03998f606a
patch 8.0.1850: todo items in source code not visible for users
...
Problem: Todo items in source code not visible for users.
Solution: Move the todo items to the help file.
2018-05-17 13:20:45 +02:00
7c63fbc46e
Updated runtime files.
2018-05-17 13:15:23 +02:00
0b39464f69
patch 8.0.1849: compiler warning for unused arguments, missing prototype
...
Problem: compiler warning for unused arguments and missing prototype
Solution: Add UNUSED. Add static.
2018-05-17 13:11:46 +02:00
4d6cd291ce
patch 8.0.1848: 'termwinscroll' does not work properly
...
Problem: 'termwinscroll' does not work properly. (Dominique Pelle)
Solution: Subtract removed scrollback from the scrollback count. Add a test
for 'termwinscroll'. (closes #2909 )
2018-05-15 23:53:26 +02:00
825ccf4039
patch 8.0.1847: some build options don't have an example
...
Problem: Some build options don't have an example.
Solution: Add a couple more examples and compiler flags.
2018-05-15 22:34:58 +02:00
d4a8c98ef6
patch 8.0.1846: Python interface is incompatible with lldb
...
Problem: Python interface is incompatible with lldb.
Solution: For OutputType set the base to be PyFile_Type. (Boxu Zhang)
Partly disabled to avoid a crash.
2018-05-15 22:31:18 +02:00
259f26ac2d
patch 8.0.1845: various comment updates needed, missing white space
...
Problem: Various comment updates needed, missing white space.
Solution: Update comments, add white space.
2018-05-15 22:25:40 +02:00
78ddc06bdd
patch 8.0.1844: superfluous quickfix code, missing examples
...
Problem: Superfluous quickfix code, missing examples.
Solution: Remove unneeded code. Add a few examples. Add a bit more
testing. (Yegappan Lakshmanan, closes #2916 )
2018-05-15 21:56:34 +02:00
8776889b5b
patch 8.0.1843: entry for 'wrap' in options window is wrong
...
Problem: Entry for 'wrap' in options window is wrong. (John Little)
Solution: Make the change apply locally.
2018-05-15 21:42:51 +02:00
0b565e5da5
patch 8.0.1842: popup menu inside terminal window isn't cleared
...
Problem: Popup menu inside terminal window isn't cleared.
Solution: Use NOT_VALID in pum_undisplay(). (suggested by Christian
Brabandt, closes #2908 )
2018-05-14 23:08:32 +02:00
1af6a4b891
patch 8.0.1841: HP-UX does not have setenv()
...
Problem: HP-UX does not have setenv().
Solution: Use vim_setenv(). (John Marriott)
2018-05-14 22:58:34 +02:00
027df2a7d9
patch 8.0.1840: getwinpos() is not tested
...
Problem: getwinpos() is not tested.
Solution: Add a test. (Dominique Pelle, closes #2911 )
2018-05-14 21:31:08 +02:00
9cfc7d885c
patch 8.0.1839: script to check .po file doesn't check for plural header
...
Problem: Script to check .po file doesn't check for plural header.
Solution: Add a check that the plural header is present when needed.
2018-05-13 22:37:03 +02:00
eb3dc87f01
Updated runtime files
2018-05-13 22:34:24 +02:00
620020eb1d
patch 8.0.1838: cursor in wrong pos when switching to Terminal-Normal mode
...
Problem: Cursor in wrong position when switching to Terminal-Normal mode.
(Dominique Pelle)
Solution: Move to the end of the line if coladvance() fails. Do not take a
snapshot a second time.
2018-05-13 19:06:12 +02:00
5e3423d192
patch 8.0.1837: one character cmdline abbreviation not triggered after '<,'>
...
Problem: One character cmdline abbreviation not triggered after '<,'>.
Solution: Skip over the special range. (Christian Brabandt, closes #2320 )
2018-05-13 18:36:27 +02:00
25782a7ff4
patch 8.0.1836: buffer-local window options may not be recent
...
Problem: Buffer-local window options may not be recent if the buffer is
still open in another window.
Solution: Copy the options from the window instead of the outdated window
options. (Bjorn Linse, closes #2336 )
2018-05-13 18:05:33 +02:00
2290b1f8aa
patch 8.0.1835: print document name does not support multi-byte
...
Problem: Print document name does not support multi-byte.
Solution: Use StartDocW() if needed. (Yasuhiro Matsumoto, closes #2478 )
2018-05-13 17:30:45 +02:00
518bc174ed
patch 8.0.1834: GUI: find/replace dialog does not handle some chars
...
Problem: GUI: find/replace dialog does not handle some chars properly.
Solution: Escape '?' when needed. Always escape backslash. (closes #2418 ,
closes #2435 )
2018-05-13 17:05:30 +02:00
889fe2c2b9
patch 8.0.1833: X11: ":echo 3.14" gives E806
...
Problem: X11: ":echo 3.14" gives E806.
Solution: set LC_NUMERIC to "C". (Dominique Pelle, closes #2368 )
2018-05-13 16:23:40 +02:00
137374fd65
patch 8.0.1832: cannot use :unlet for an environment variable
...
Problem: Cannot use :unlet for an environment variable.
Solution: Make it work. Use unsetenv() if available. (Ken Takata,
closes #2855 )
2018-05-13 15:59:50 +02:00
8b62e31003
patch 8.0.1831: sometimes the quickfix title is incorrectly prefixed with ':'
...
Problem: Sometimes the quickfix title is incorrectly prefixed with ':'.
Solution: Prepend the colon in another way. (Yegappan Lakshmanan, closes
#2905 )
2018-05-13 15:29:04 +02:00
05c4a471d2
patch 8.0.1830: switching to Terminal-Normal mode does not redraw
...
Problem: Switching to Terminal-Normal mode does not redraw. (Dominique
Pelle)
Solution: Also redraw when not updating the snapshot. (closes #2904 )
2018-05-13 15:15:43 +02:00
12365ce49f
patch 8.0.1829: MS-Windows: script for vimdiff can't handle ! chars
...
Problem: MS-Windows: script for vimdiff can't handle ! chars.
Solution: Escape the ! chars. (Hans Ginzel, closes #2896 )
2018-05-13 14:45:25 +02:00
e65fffd9b4
patch 8.0.1828: get no clue why :gui does not fork
...
Problem: Get no clue why :gui does not fork.
Solution: Add a channel log message.
2018-05-13 14:40:15 +02:00
b2ed680ba7
patch 8.0.1827: compiler warning for signed/unsigned char pointers
...
Problem: Compiler warning for signed/unsigned char pointers. (Cesar Romani)
Solution: Change the type of jv_argv.
2018-05-13 14:05:18 +02:00
7db25fed5d
Update runtime files.
2018-05-13 00:02:36 +02:00
52ecaaa63d
patch 8.0.1826: configure uses old compiler flag
...
Problem: Configure uses old compiler flag.
Solution: Remove _DARWIN_C_SOURCE. (Kazunobu Kuriyama)
2018-05-12 21:38:13 +02:00
dd1d7be4e6
patch 8.0.1825: might use NULL pointer when out of memory
...
Problem: Might use NULL pointer when out of memory. (Coverity)
Solution: Handle NULL pointer better.
2018-05-12 21:34:58 +02:00
73dd1bd54e
patch 8.0.1824: Coverity warns for variable that may be uninitialized
...
Problem: Coverity warns for variable that may be uninitialized.
Solution: Initialize the variable.
2018-05-12 21:16:25 +02:00
54c6bafa16
patch 8.0.1823: test for terminal stdout redirection is flaky
...
Problem: Test for terminal stdout redirection is flaky.
Solution: Wait for the job to finish.
2018-05-12 21:12:12 +02:00
ee62f9fa74
patch 8.0.1822: make uninstall does not remove colors/tools
...
Problem: Make uninstall does not remove colors/tools.
Solution: Add a line to delete the tools directory. (Kazunobu Kuriyama)
2018-05-12 21:05:45 +02:00
2bc799579d
patch 8.0.1821: cursor in terminal window moves when pressing CTRL-W
...
Problem: Cursor in terminal window moves when pressing CTRL-W. (Dominique
Pelle)
Solution: Do not more the cursor or redraw when not in Terminal-Normal mode.
(closes #2904 )
2018-05-12 20:36:24 +02:00
cd8fb449d6
patch 8.0.1820: terminal window redirecting stdout does not show stderr
...
Problem: Terminal window redirecting stdout does not show stderr. (Matéo
Zanibelli)
Solution: When stdout is not connected to pty_master_fd then use it for
stderr. (closes #2903 )
2018-05-12 17:42:42 +02:00
8c3169c58e
patch 8.0.1819: swap file warning for file with non-existing directory
...
Problem: Swap file warning for a file in a non-existing directory, if there
is another with the same file name. (Juergen Weigert)
Solution: When expanding the file name fails compare the file names.
2018-05-12 17:04:12 +02:00
3f1a53c434
patch 8.0.1818: lines remove from wrong buffer when using terminal window
...
Problem: Lines remove from wrong buffer when using terminal window.
Solution: Make sure to use tl_buffer.
2018-05-12 16:55:14 +02:00
b0f42ba60d
patch 8.0.1817: a timer may change v:count unexpectedly
...
Problem: A timer may change v:count unexpectedly.
Solution: Save and restore v:count and similar variables when a timer
callback is invoked. (closes #2897 )
2018-05-12 15:38:26 +02:00
ff3be4fe1e
patch 8.0.1816: no test for setcmdpos()
...
Problem: No test for setcmdpos().
Solution: Add a test. (Dominique Pelle, closes #2901 )
2018-05-12 13:18:46 +02:00
0cb8ac71ae
patch 8.0.1815: crash with terminal window and with 'lazyredraw' set
...
Problem: Still a crash with terminal window and with 'lazyredraw' set.
(Antoine)
Solution: Do not wipe out the buffer when updating the screen.
2018-05-11 22:01:51 +02:00
a10ae5e323
patch 8.0.1814: crash with terminal window and with 'lazyredraw' set
...
Problem: Crash with terminal window and with 'lazyredraw' set. (Antoine)
Solution: Check the terminal still exists after update_screen().
2018-05-11 20:48:29 +02:00
38623c8512
patch 8.0.1813: Windows installer doesn't install terminal debugger
...
Problem: Windows installer doesn't install terminal debugger.
Solution: Add the package to the list of files to install.
2018-05-10 21:24:35 +02:00
7a2b0e55e9
patch 8.0.1812: the qf_jump_to_usable_window() function is too long
...
Problem: The qf_jump_to_usable_window() function is too long.
Solution: Split it in parts. (Yegappan Lakshmanan, closes #2891 )
2018-05-10 18:55:28 +02:00
72cf47a279
patch 8.0.1811: no test for winrestcmd()
...
Problem: No test for winrestcmd().
Solution: Add a test. (Dominique Pelle, closes #2894 )
2018-05-10 18:23:29 +02:00
56bc8e299c
patch 8.0.1810: buffer of a terminal only updated in Terminal-Normal mode
...
Problem: Buffer of a terminal only updated in Terminal-Normal mode.
Solution: Copy the terminal window content to the buffer when in
Terminal-Job mode.
2018-05-10 18:05:56 +02:00
b946482190
patch 8.0.1809: various typos
...
Problem: Various typos.
Solution: Correct the mistakes, change "cursur" to "cursor". (closes #2887 )
2018-05-10 15:09:49 +02:00
9289df5ca9
patch 8.0.1808: can't build without TGETENT
...
Problem: Can't build without TGETENT.
Solution: Add #ifdef
2018-05-10 14:40:57 +02:00
69e056915c
patch 8.0.1807: function to set terminal name is too long
...
Problem: Function to set terminal name is too long.
Solution: Refactor the function. Fix typo in test.
2018-05-10 14:11:52 +02:00
39de952577
patch 8.0.1806: InsertCharPre causes problems for autocomplete
...
Problem: InsertCharPre causes problems for autocomplete. (Lifepillar)
Solution: Check for InsertCharPre before calling vpeekc(). (Christian
Brabandt, closes #2876 )
2018-05-08 22:48:00 +02:00
18cebf4417
patch 8.0.1805: qf_parse_line() is too long
...
Problem: qf_parse_line() is too long.
Solution: Split it in parts. Properly handle vim_realloc() failing.
(Yegappan Lakshmanan, closes #2881 )
2018-05-08 22:31:37 +02:00
655a82a8d3
patch 8.0.1804: using :normal in terminal window causes problems
...
Problem: Using :normal in terminal window causes problems. (Dominique
Pelle)
Solution: Don't call terminal_loop() for :normal. (closes #2886 )
2018-05-08 22:01:07 +02:00
9b50f36e40
patch 8.0.1803: warning for uninitialized variable
...
Problem: Warning for uninitialized variable. (Tony Mechelynck)
Solution: Initialize it.
2018-05-07 20:10:17 +02:00
402c83921e
patch 8.0.1802: MS-Windows: terminal test fails
...
Problem: MS-Windows: terminal test fails.
Solution: Close redirected output file earlier.
2018-05-06 22:01:42 +02:00
f25329cb94
patch 8.0.1801: MS-Windows: redirecting terminal output does not work
...
Problem: MS-Windows: redirecting terminal output does not work.
Solution: Intercept the text written to the terminal and write it to the
file.
2018-05-06 21:49:32 +02:00
778df2a3cb
patch 8.0.1800: X11: getting color is slow
...
Problem: X11: getting color is slow.
Solution: Avoid using sprintf() and XParseColor(), put the RGB values in
XColor directly.
2018-05-06 19:19:36 +02:00
85eee130f4
Update runtime files.
2018-05-06 17:57:30 +02:00
7ce551f317
patch 8.0.1799: no test for :registers command
...
Problem: No test for :registers command.
Solution: Add a test. (Dominique Pelle, closes #2880 )
2018-05-06 17:32:19 +02:00
5aa9896b2e
patch 8.0.1798: MS-Windows: file considered read-only too often
...
Problem: MS-Windows: file considered read-only when another program has
opened it.
Solution: Pass file sharing flag to CreateFile(). (Linwei, closes #2860 )
2018-05-06 17:09:38 +02:00
6eddadff13
patch 8.0.1797: terminal window is redrawn too often
...
Problem: Terminal window is redrawn too often and scrolling is repeated.
Solution: Don't scroll immediately but only when redrawing. Avoid redrawing
the whole terminal window on every change.
2018-05-06 16:40:16 +02:00
231a2db1b3
patch 8.0.1796: GUI: click on tab fails when the focus is in a terminal
...
Problem: GUI: click on tab fails when the focus is in a terminal window.
Solution: Handle K_TABLINE.
2018-05-06 13:53:50 +02:00
b0b98d5230
patch 8.0.1795: lose contact with jobs when :gui forks
...
Problem: Lose contact with jobs when :gui forks.
Solution: Don't fork when there is a running job. Make log message for a
died job clearer. Also close the terminal when stderr and stdout
are the same FD.
2018-05-05 21:01:00 +02:00
b833c1ef7b
patch 8.0.1794: duplicate term options after renaming
...
Problem: Duplicate term options after renaming.
Solution: Remove the old names 'termkey', 'termsize' and 'terminalscroll'.
2018-05-05 16:36:06 +02:00
248be5c5de
patch 8.0.1793: no test for "vim -g"
...
Problem: No test for "vim -g".
Solution: Add a test for "-g" and "-y".
2018-05-05 15:47:19 +02:00
c3e81694fc
patch 8.0.1792: MS-Windows users expect -? to work like --help
...
Problem: MS-Windows users expect -? to work like --help.
Solution: Add -?. (Christian Brabandt, closes #2867 )
2018-05-05 15:09:51 +02:00
9894e394b2
patch 8.0.1791: using uint8_t does not work everywhere
...
Problem: Using uint8_t does not work everywhere.
Solution: Use char_u instead.
2018-05-05 14:29:06 +02:00
c136af29c0
patch 8.0.1790: 'winfixwidth' is not always respected by :close
...
Problem: 'winfixwidth' is not always respected by :close.
Solution: Prefer a frame without 'winfixwidth' or 'winfixheight'. (Jason
Franklin)
2018-05-04 20:15:38 +02:00
606cb8b08e
patch 8.0.1789: BufWinEnter does not work well for a terminal window
...
Problem: BufWinEnter does not work well for a terminal window.
Solution: Do not trigger BufWinEnter when opening a terminal window.
2018-05-03 20:40:20 +02:00
dddab90d22
patch 8.0.1788: tool to check a color scheme is not installed
...
Problem: Tool to check a color scheme is not installed.
Solution: Update the install rule. (Christian Brabandt)
2018-05-02 22:00:17 +02:00
e2c8d83926
patch 8.0.1787: cannot insert the whole cursor line
...
Problem: Cannot insert the whole cursor line.
Solution: Make CTRL-R CTRL-L work. (Andy Massimino, closes #2857 )
2018-05-01 19:24:03 +02:00
b2ac14c0b5
patch 8.0.1786: no test for 'termwinkey'
...
Problem: No test for 'termwinkey'.
Solution: Add a test. Make feedkeys() handle terminal_loop() returning
before characters are consumed.
2018-05-01 18:47:59 +02:00
8a938af6dd
patch 8.0.1785: missing symbol in Win32 small build
...
Problem: Missing symbol in Win32 small build.
Solution: Define VTERM_ANSI_INDEX_NONE without the terminal feature. Also
fix unused function with #ifdef.
2018-05-01 17:30:41 +02:00
bc7845da93
patch 8.0.1784: gvim test gets stuck in dialog
...
Problem: Gvim test gets stuck in dialog.
Solution: Rename the file used.
2018-05-01 16:26:48 +02:00
c5cd88554f
patch 8.0.1783: cannot use 256 colors in a MS-Windows console
...
Problem: Cannot use 256 colors in a MS-Windows console.
Solution: Add 256 color support. (Nobuhiro Takasaki, closes #2821 )
2018-05-01 15:47:38 +02:00
d76ce85266
patch 8.0.1782: no simple way to label quickfix entries
...
Problem: No simple way to label quickfix entries.
Solution: Add the "module" item, to be used instead of the file name for
display purposes. (Martin Szamotulski, closes #1757 )
2018-05-01 15:02:04 +02:00
a796d46f29
patch 8.0.1781: file names in quickfix window are not shortened
...
Problem: File names in quickfix window are not always shortened.
Solution: Shorten the file name when opening the quickfix window. (Yegappan
Lakshmanan, closes #2851 , closes #2846 )
2018-05-01 14:30:36 +02:00
15142e27aa
Update runtime files and translations
2018-04-30 22:19:58 +02:00
77bfd756a0
patch 8.0.1780: test fails because Vim in a terminal uses wrong 'encoding'
...
Problem: Test fails because Vim in a terminal uses wrong 'encoding'.
Solution: Set encoding in the test where it matters. (James McCoy,
closes #2847 )
2018-04-30 18:03:10 +02:00
35e802e713
patch 8.0.1779: deleting in a block selection causes problems
...
Problem: Deleting in a block selection causes problems.
Solution: Check the length of the line before adding bd.textcol and
bd.textlen. (Christian Brabandt, closes #2825 )
2018-04-30 17:21:03 +02:00
b07bbb0d29
patch 8.0.1778: script to check translations does not always work
...
Problem: Script to check translations does not always work.
Solution: Go to first line before searching for MIME.
2018-04-30 15:45:17 +02:00
60a68362aa
patch 8.0.1777: cannot cleanup before loading another colorscheme
...
Problem: Cannot cleanup before loading another colorscheme.
Solution: Add the ColorSchemePre autocommand event.
2018-04-30 15:40:48 +02:00
0e9d1ae321
patch 8.0.1776: in tests, when WaitFor() fails it doesn't say why
...
Problem: In tests, when WaitFor() fails it doesn't say why.
Solution: Turn a few more WaitFor() into WaitForAssert().
2018-04-30 14:28:24 +02:00
850d427f07
patch 8.0.1775: MS-Windows: warning for unused variable
...
Problem: MS-Windows: warning for unused variable.
Solution: Move declaration inside #ifdef. (Mike Williams)
2018-04-30 10:38:40 +02:00
13d3b05ed2
patch 8.0.1774: reading very long lines can be slow
...
Problem: Reading very long lines can be slow.
Solution: Read up to 1 Mbyte at a time to avoid a lot of copying. Add a
check for going over the column limit.
2018-04-29 13:34:47 +02:00
c36651b4b9
patch 8.0.1773: dialog messages are not translated
...
Problem: Dialog messages are not translated.
Solution: Add N_() and _() where needed. (Sergey Alyoshin)
2018-04-29 12:22:56 +02:00
29ce409bfc
patch 8.0.1772: quickfix: mixup of FALSE and FAIL, returning -1
...
Problem: Quickfix: mixup of FALSE and FAIL, returning -1.
Solution: Use FAIL and INVALID_QFIDX. (Yegappan Lakshmanan)
2018-04-28 21:56:44 +02:00
50182fa84e
patch 8.0.1771: in tests, when WaitFor() fails it doesn't say why
...
Problem: In tests, when WaitFor() fails it doesn't say why. (James McCoy)
Solution: Add WaitForAssert(), which produces an assert error when it fails.
2018-04-28 21:34:40 +02:00
65a5464985
patch 8.0.1770: assert functions don't return anything
...
Problem: Assert functions don't return anything.
Solution: Return non-zero when the assertion fails.
2018-04-28 16:56:53 +02:00
9b25af3620
patch 8.0.1769: repeated saving and restoring viewstate for 'incsearch'
...
Problem: Repeated saving and restoring viewstate for 'incsearch'.
Solution: Use a structure.
2018-04-28 13:56:09 +02:00
451fc7b954
patch 8.0.1768: SET_NO_HLSEARCH() used in a wrong way
...
Problem: SET_NO_HLSEARCH() used in a wrong way.
Solution: Make it a function. (suggested by Dominique Pelle,
closes #2850 )
2018-04-27 22:53:07 +02:00
9d34d90210
patch 8.0.1767: with 'incsearch' text may jump up and down
...
Problem: With 'incsearch' text may jump up and down. ()
Solution: Besides w_botline also save and restore w_empty_rows.
(closes # 2530)
2018-04-27 22:18:12 +02:00
c3c3e69896
patch 8.0.1766: expanding abbreviation doesn't work
...
Problem: Expanding abbreviation doesn't work. (Tooth Pik)
Solution: Return OK instead of FALSE and FAIL instead of TRUE. (Christian
Brabandt)
2018-04-26 22:30:33 +02:00
db0eedec16
patch 8.0.1765: CTRL-G j in Insert mode is incorrect when 'virtualedit' set
...
Problem: CTRL-G j in Insert mode is incorrect when 'virtualedit' is set.
Solution: Take coladd into account. (Christian Brabandt, closes #2743 )
2018-04-25 22:38:17 +02:00
856905bd83
patch 8.0.1764: lgtm considers tutor.es to be EcmaScript
...
Problem: Lgtm considers tutor.es to be EcmaScript.
Solution: Add a config file for lgtm. (Bas van Schaik, closes #2844 )
2018-04-25 21:36:47 +02:00
46a53dfc29
patch 8.0.1763: :argedit does not reuse an empty unnamed buffer
...
Problem: :argedit does not reuse an empty unnamed buffer.
Solution: Add the BLN_CURBUF flag and fix all the side effects. (Christian
Brabandt, closes #2713 )
2018-04-24 21:58:51 +02:00
b255b90503
patch 8.0.1762: terminal debug logging is a bit complicated
...
Problem: Terminal debug logging is a bit complicated.
Solution: Make log_tr() use variable arguments (Ozaki Kiichi, closes #2730 )
2018-04-24 21:40:10 +02:00
4e9d443a25
patch 8.0.1761: job in terminal window with no output channel is killed
...
Problem: Job in terminal window with no output channel is killed.
Solution: Keep the job running when the input is a tty. (Ozaki Kiichi,
closes #2734 )
2018-04-24 20:54:07 +02:00
4994373c5d
patch 8.0.1760: wrong number of arguments to vms_read()
...
Problem: Wrong number of arguments to vms_read().
Solution: Drop the first argument. (Ozaki Kiichi)
2018-04-24 20:27:26 +02:00
09d1d51df5
patch 8.0.1759: memory leak from duplicate options
...
Problem: Memory leak from duplicate options. (Yegappan Lakshmanan)
Solution: Don't set the default value twice.
2018-04-24 20:23:56 +02:00
24a2d7264f
patch 8.0.1758: open_line() returns TRUE/FALSE for success/failure
...
Problem: open_line() returns TRUE/FALSE for success/failure.
Solution: Return OK or FAIL.
2018-04-24 19:36:43 +02:00
b691de05f6
patch 8.0.1757: unnecessary changes in libvterm
...
Problem: Unnecessary changes in libvterm.
Solution: Bring back // comments and trailing comma in enums.
2018-04-24 18:39:14 +02:00
73658317ba
patch 8.0.1756: GUI: after prompting for a number the mouse shape is wrong
...
Problem: GUI: after prompting for a number the mouse shape is sometimes
wrong.
Solution: Call setmouse() after setting "State". (Hirohito Higashi,
closes #2709 )
2018-04-24 17:41:57 +02:00
f1f2f837bc
patch 8.0.1755: MS-Windows: high unicode char received as two utf-16 words
...
Problem: MS-Windows GUI: high unicode char received as two utf-16 words.
Solution: Keep the first word until the second word is received. (Chris
Morgan, closes #2800 )
2018-04-24 16:04:57 +02:00
2225ebb486
patch 8.0.1754: ex_helpgrep() is too long
...
Problem: ex_helpgrep() is too long.
Solution: Refactor the function. (Yegappan Lakshmanan, closes #2766 )
2018-04-24 15:48:11 +02:00
1c17ffa461
patch 8.0.1753: various warnings from a static analyser
...
Problem: Various warnings from a static analyser
Solution: Add type casts, remove unneeded conditions. (Christian Brabandt,
closes #2770 )
2018-04-24 15:19:04 +02:00
a2aa8a2b22
patch 8.0.1752: qf_set_properties() is to long
...
Problem: qf_set_properties() is to long.
Solution: Refactor the function. Define INVALID_QFIDX. (Yegappan
Lakshmanan, closes #2812 )
2018-04-24 13:55:00 +02:00
4e601e3c82
patch 8.0.1751: #ifdef causes bad highlighting
...
Problem: #ifdef causes bad highlighting.
Solution: Move code around. (Ozaki Kiichi, closes #2731 )
2018-04-24 13:29:51 +02:00
3b9474b4ad
patch 8.0.1750: crash when clearing loccation list in autocommand
...
Problem: Crash when clearing loccation list in autocommand.
Solution: Check if "qi" equals "ql_info". (Yegappan Lakshmanan)
2018-04-23 21:29:48 +02:00
6537c421bb
patch 8.0.1749: VMS: 100% CPU use, redefining mch_open() fails
...
Problem: VMS: 100% CPU use, redefining mch_open() and mch_fopen() fails.
Solution: Do not wait indefinitely in RealWaitForChar(). (Neil Rieck)
Do not redefine mch_open() and mch_fopen() on VMS. (Zoltan
Arpadffy)
2018-04-23 20:46:16 +02:00
a4baf5b325
patch 8.0.1748: CmdlineEnter command uses backslash instead of slash
...
Problem: CmdlineEnter command uses backslash instead of slash.
Solution: Don't treat the character as a file name. (closes #2837 )
2018-04-22 13:27:44 +02:00
ebe74b7367
patch 8.0.1747: MS-Windows: term_start() does not set job_info() cmd
...
Problem: MS-Windows: term_start() does not set job_info() cmd.
Solution: Share the code from job_start() to set jv_argv.
2018-04-21 23:34:43 +02:00
a69b39511d
patch 8.0.1746: MS-Windows: channel tests fail
...
Problem: MS-Windows: channel tests fail.
Solution: Make a copy of the command before splitting it.
2018-04-21 23:00:27 +02:00
2060892028
patch 8.0.1745: build failure on MS-Windows
...
Problem: Build failure on MS-Windows.
Solution: Build job arguments for MS-Windows. Fix allocating job twice.
2018-04-21 22:30:08 +02:00
9980b37a80
patch 8.0.1744: on some systems /dev/stdout isn't writable
...
Problem: On some systems /dev/stdout isn't writable.
Solution: Skip test if writing is not possible. (James McCoy, closes #2830 )
2018-04-21 20:12:35 +02:00
6d150f783d
patch 8.0.1743: terminal window options are named inconsistently
...
Problem: Terminal window options are named inconsistently.
Solution: prefix terminal window options with "termwin". Keep the old names
for now as an alias.
2018-04-21 20:03:20 +02:00
e1fc51558d
patch 8.0.1742: cannot get a list of all the jobs
...
Problem: Cannot get a list of all the jobs. Cannot get the command of
the job.
Solution: When job_info() is called without an argument return a list of
jobs. Otherwise, include the command that the job is running.
(Yegappan Lakshmanan)
2018-04-21 19:49:08 +02:00
259a90f7ce
patch 8.0.1741: MS-Windows with msys2 cannot build Ruby statically
...
Problem: MS-Windows with msys2 cannot build Ruby statically.
Solution: Add RUBY_VERSION to CFLAGS later. (Gray Wolf, closes #2833 )
2018-04-21 19:08:55 +02:00
405dadb63e
patch 8.0.1740: warning for signed-unsigned incompatibility
...
Problem: Warning for signed-unsigned incompatibility.
Solution: Change type from "char *" to "char_u *". (John Marriott)
2018-04-20 22:48:58 +02:00
7dda86f2ff
Update runtime files.
2018-04-20 22:36:41 +02:00
6176697203
patch 8.0.1739: MS-Windows with msys2 cannot build Ruby statically
...
Problem: MS-Windows with msys2 cannot build Ruby statically.
Solution: Define RUBY_VERSION. (Gray Wolf, closes #2826 )
2018-04-20 22:31:41 +02:00
5d69da462f
patch 8.0.1738: ":args" output is hard to read
...
Problem: ":args" output is hard to read.
Solution: Make columns with the names if the output is more than one line.
2018-04-20 22:01:41 +02:00
02e802b2da
patch 8.0.1737: fchown() used when it is not supported
...
Problem: fchown() used when it is not supported.
Solution: Add #ifdef.
2018-04-19 21:15:27 +02:00
226400830b
patch 8.0.1736: check for C99 features is incomplete
...
Problem: Check for C99 features is incomplete.
Solution: Use AC_PROG_CC_C99 and when C99 isn't fully supported check the
features we need. (James McCoy, closes #2820 )
2018-04-19 20:39:41 +02:00
285e335869
patch 8.0.1735: flexible array member feature not supported by HP-UX
...
Problem: Flexible array member feature not supported by HP-UX. (John
Marriott)
Solution: Do not use the flexible array member feature of C99.
2018-04-18 23:01:13 +02:00
f98a39ca57
patch 8.0.1734: package directory not added to 'rtp' if prefix matches
...
Problem: Package directory not added to 'rtp' if prefix matches.
Solution: Check the match is a full match. (Ozaki Kiichi, closes #2817 )
Also handle different ways of spelling a path.
2018-04-18 22:18:23 +02:00
bad0ce7b26
patch 8.0.1733: incomplete testing for completion fix
...
Problem: Incomplete testing for completion fix. (Lifepillar)
Solution: Add a test with CTRL-P.
2018-04-17 23:31:05 +02:00
a997b45c7e
patch 8.0.1732: crash when terminal API call deletes the buffer
...
Problem: Crash when terminal API call deletes the buffer.
Solution: Lock the buffer while calling a function. (closes #2813 )
2018-04-17 23:24:06 +02:00
e87edf3b85
patch 8.0.1731: characters deleted on completion
...
Problem: Characters deleted on completion. (Adrià Farrés)
Solution: Also check the last item for the ORIGINAL_TEXT flag. (Christian
Brabandt, closes #1645 )
2018-04-17 22:14:32 +02:00
561f8a5a46
patch 8.0.1730: no configure check for the used C99 features
...
Problem: No configure check for the used C99 features.
Solution: Add a compilation check. Tentatively document C99 features.
2018-04-17 22:02:45 +02:00
ea3ece405a
patch 8.0.1729: no comma after last enum item
...
Problem: No comma after last enum item.
Solution: Add a few commas to check if this works for all compilers. Also
add a few // comments.
2018-04-17 20:14:39 +02:00
1feab2b9cc
patch 8.0.1728: condition always false, useless code
...
Problem: Condition always false, useless code.
Solution: Remove the code. (Nikolai Pavlov, closes #2808 )
2018-04-17 20:12:08 +02:00
353eeeaca2
patch 8.0.1727: qf_get_properties() function is too long
...
Problem: qf_get_properties() function is too long.
Solution: Refactor the code. (Yegappan Lakshmanan, closes #2807 )
2018-04-16 18:04:57 +02:00
df2c774ded
patch 8.0.1726: older MSVC doesn't support declarations halfway a block
...
Problem: Older MSVC doesn't support declarations halfway a block.
Solution: Move the declaration back to the start of the block.
2018-04-16 17:06:09 +02:00
32c67ba733
patch 8.0.1725: terminal debugger doesn't handle command arguments
...
Problem: Terminal debugger doesn't handle command arguments.
Solution: Add the :TermdebugCommand command. Use a ! to execute right away.
(Christian Brabandt)
2018-04-16 16:21:49 +02:00
06965b838f
patch 8.0.1724: declarations cannot be halfway a block
...
Problem: Declarations cannot be halfway a block.
Solution: Move one declaration to check if this works for all compilers.
2018-04-16 15:40:50 +02:00
f3a411783c
patch 8.0.1723: using one item array size declaration is misleading
...
Problem: Using one item array size declaration is misleading.
Solution: Instead of using "[1]" and actually using a larger array, use
"[]". This is to verify that this C99 feature works for all
compilers.
2018-04-16 14:45:45 +02:00
498c2562e1
patch 8.0.1722: cannot specify a minimal size for a terminal window
...
Problem: Cannot specify a minimal size for a terminal window.
Solution: Support the "rows*cols" format for 'winsize'.
2018-04-15 23:45:15 +02:00
a7eef3d87f
patch 8.0.1721: no test for using the 'termsize' option
...
Problem: No test for using the 'termsize' option.
Solution: Add a test.
2018-04-15 22:25:54 +02:00
802bfb1463
patch 8.0.1720: when a timer is running a terminal window may not close
...
Problem: When a timer is running a terminal window may not close after a
shell has exited.
Solution: Call job_status() more often.
2018-04-15 17:28:13 +02:00
e1a32310d5
patch 8.0.1719: cannot specify which Python executable configure should use
...
Problem: Cannot specify which Python executable configure should use.
Solution: Add --with-python-command and --with-python3-command.
2018-04-15 16:03:25 +02:00
6c672194cd
patch 8.0.1718: terminal scrollback test fails on MS-Windows
...
Problem: Terminal scrollback test fails on MS-Windows.
Solution: Check for the last line of output anticipating there might be an
empty line below it.
2018-04-15 13:28:42 +02:00
3cba73423e
patch 8.0.1717: C89 check causes too much trouble
...
Problem: C89 check causes too much trouble.
Solution: Remove enforcing C89 for now.
2018-04-15 13:12:46 +02:00
ac3e830065
patch 8.0.1716: test for term_setsize() does not give a good error message
...
Problem: Test for term_setsize() does not give a good error message.
Solution: use assert_inrange().
2018-04-15 13:10:44 +02:00
8c94a54905
patch 8.0.1715: terminal buffer can be 1 more than 'terminalscroll' lines
...
Problem: Terminal buffer can be 1 more than 'terminalscroll' lines.
Solution: Change > to >=.
2018-04-15 12:55:13 +02:00
6e72cd0d72
patch 8.0.1714: term_setsize() does not give an error in a normal buffer
...
Problem: Term_setsize() does not give an error in a normal buffer.
Solution: Add an error message.
2018-04-14 21:31:35 +02:00
b3623a382a
patch 8.0.1713: terminal debugger doesn't handle arguments
...
Problem: Terminal debugger doesn't handle arguments.
Solution: Use <f-args> and pass all the arguments to gdb, e.g. the core file
or process number. (suggested by Christian Brabandt) Disallow
starting the debugger twice.
2018-04-14 18:59:50 +02:00
8c041b6b95
patch 8.0.1712: terminal scrollback is not limited
...
Problem: Terminal scrollback is not limited.
Solution: Add the 'terminalscroll' option.
2018-04-14 18:14:06 +02:00
a42d363bac
patch 8.0.1711: term_setsize() is not implemented yet
...
Problem: Term_setsize() is not implemented yet.
Solution: Implement it.
2018-04-14 17:05:38 +02:00
2a43230ce3
patch 8.0.1710: building with Ruby fails
...
Problem: Building with Ruby fails.
Solution: Don't add -ansi when building with Ruby.
2018-04-14 16:12:30 +02:00
2e324950b8
patch 8.0.1709: some non-C89 code may slip through
...
Problem: Some non-C89 code may slip through.
Solution: Enforce C89 in configure. Fix detected problems. (James McCoy,
closes #2735 )
2018-04-14 14:37:07 +02:00
78a16b0f2a
patch 8.0.1708: mkdir with 'p' flag fails on existing directory
...
Problem: Mkdir with 'p' flag fails on existing directory, which is
different from the mkdir shell command.
Solution: Don't fail if the directory already exists. (James McCoy,
closes #2775 )
2018-04-14 13:51:55 +02:00
98da6ecab9
patch 8.0.1707: when 'wfh' is set ":bel 10new" scrolls window
...
Problem: When 'wfh' is set ":bel 10new" scrolls window. (Andrew Pyatkov)
Solution: Set the fraction before changing the window height. (closes #2798 )
2018-04-13 22:15:46 +02:00
b59118d501
patch 8.0.1706: cannot sent CTRL-\ to a terminal window
...
Problem: Cannot sent CTRL-\ to a terminal window.
Solution: Make CTRL-W CTRL-\ send CTRL-\ to a terminal window.
2018-04-13 22:11:56 +02:00
5bab555c2f
patch 8.0.1705: when making a vertical split the mode message isn't updated
...
Problem: When making a vertical split the mode message isn't always
updated, "VISUAL" remains. (Alexei Averchenko)
Solution: Only reset clear_cmdline when filling all columns of the last
screen line. (Tom M. closes #2611 )
2018-04-13 20:41:29 +02:00
b8e22a053b
patch 8.0.1704: 'backupskip' default doesn't work for Mac
...
Problem: 'backupskip' default doesn't work for Mac.
Solution: Use "/private/tmp". (Rainer Müller, closes #2793 )
2018-04-12 21:37:34 +02:00
527dec3f94
patch 8.0.1703: in the tutor 'showcmd' is not set
...
Problem: In the tutor 'showcmd' is not set.
Solution: Set 'showcmd' in the vimtutor script. (Ken Takata, closes #2792 )
2018-04-12 20:36:43 +02:00
ee5b94a8ec
patch 8.0.1702: leaking memory when autocommands make quickfix list invalid
...
Problem: Leaking memory when autocommands make a quickfix list invalid.
Solution: Call FreeWild(). (Yegappan Lakshmanan)
2018-04-12 20:35:05 +02:00
cccd62d435
patch 8.0.1701: can disable COLOR_EMOJI with MSVC but not MinGW
...
Problem: Can disable COLOR_EMOJI with MSVC but not MinGW.
Solution: Add COLOR_EMOJI flag. Also add some empty lines for readability.
2018-04-12 20:23:48 +02:00
56f9955044
patch 8.0.1700: coverage statistics still don't work on coveralls
...
Problem: Coverate statistics still don't work on coveralls.
Solution: Exclude the xxd directory again.
2018-04-12 20:06:05 +02:00
9ce4213b03
patch 8.0.1699: leftover stuff for Python 1.4
...
Problem: Leftover stuff for Python 1.4.
Solution: Remove outdated Python 1.4 stuff. (Naoki Inada, closes #2794 )
2018-04-11 22:19:36 +02:00
1ed00330bc
patch 8.0.1698: coverage statistics don't work on coveralls
...
Problem: Coverate statistics don't work on coveralls.
Solution: Use curly braces for $SRCDIR.
2018-04-11 21:03:08 +02:00
769e9d21ac
patch 8.0.1697: various tests are still a bit flaky
...
Problem: Various tests are still a bit flaky.
Solution: Increase the default wait time to five seconds.
2018-04-11 20:53:49 +02:00
d60e0a1d20
patch 8.0.1696: coverage statistics don't work
...
Problem: Coverate statistics don't work.
Solution: Include the xxd directory. (Christian Brabandt)
2018-04-11 10:06:04 +02:00
6995c0a7a9
patch 8.0.1695: xxd test not run on MS-Windows
...
Problem: Xxd test not run on MS-Windows.
Solution: Use xxd.exe if it exists.
2018-04-10 21:46:10 +02:00
b377457e69
patch 8.0.1694: terminal API test is a bit flaky
...
Problem: Terminal API test is a bit flaky.
Solution: Wait longer for Vim to stop.
2018-04-10 21:43:26 +02:00
1acdb3f301
patch 8.0.1693: xxd is excluded from coverage statistics
...
Problem: Xxd is excluded from coverage statistics.
Solution: Don't skip the xxd directory. (Christian Brabandt)
2018-04-10 21:16:32 +02:00
3a21d9c7bb
patch 8.0.1692: Python may not work when using statically linked library
...
Problem: Python may not work when using statically linked library .
Solution: Do not define PYTHON_HOME and PYTHON3_HOME in configure if the
Python library is linked statically.
2018-04-10 20:26:20 +02:00
164268d4cf
patch 8.0.1691: xxd test sometimes fails
...
Problem: Xxd test sometimes fails.
Solution: Wipe out the XXDfile buffer.
2018-04-10 20:06:17 +02:00
8dd1761e69
patch 8.0.1690: not easy to run one test with gvim instead of vim
...
Problem: Not easy to run one test with gvim instead of vim.
Solution: Add VIMTESTTARGET in Makefile.
2018-04-10 19:24:04 +02:00
29f9ed20b4
patch 8.0.1689: no tests for xxd
...
Problem: No tests for xxd.
Solution: Add a test. (Christian Brabandt)
2018-04-10 19:20:31 +02:00
6f4700233f
patch 8.0.1688: some macros are used without a semicolon
...
Problem: Some macros are used without a semicolon, causing auto-indent to be
wrong.
Solution: Use the do-while(0) trick. (Ozaki Kiichi, closes #2729 )
2018-04-10 18:47:20 +02:00
d6b4f2dd76
patch 8.0.1687: 64 bit compiler warnings
...
Problem: 64 bit compiler warnings.
Solution: change type, add type cast. (Mike Williams)
2018-04-10 18:26:27 +02:00
d088240b96
patch 8.0.1686: Python does not work when configuring with specific dir
...
Problem: Python does not work when configuring with specific dir. (Rajdeep)
Solution: Do define PYTHON_HOME and PYTHON3_HOME in configure if the Python
config dir was specified.
2018-04-10 18:13:05 +02:00
f59c6e8cee
patch 8.0.1685: can't set ANSI colors of a terminal window
...
Problem: Can't set ANSI colors of a terminal window.
Solution: Add term_setansicolors(), term_getansicolors() and
g:term_ansi_colors. (Andy Massimino, closes #2747 )
2018-04-10 15:59:11 +02:00
07b46af645
patch 8.0.1684: ml_get errors when using terminal window for shell command
...
Problem: ml_get errors when using terminal window for shell command.
(Blay263)
Solution: Do not change the size of the current window.
2018-04-10 14:56:18 +02:00
0424958bde
patch 8.0.1683: Python upgrade breaks Vim when defining PYTHON_HOME
...
Problem: Python upgrade breaks Vim when defining PYTHON_HOME.
Solution: Do not define PYTHON_HOME and PYTHON3_HOME in configure. (Naoki
Inada, closes #2787 )
2018-04-10 13:29:34 +02:00
8c87a2b1fe
patch 8.0.1682: auto indenting breaks inserting a block
...
Problem: Auto indenting breaks inserting a block.
Solution: Do not check for cursor movement if indent was changed. (Christian
Brabandt, closes #2778 )
2018-04-10 13:15:47 +02:00
e80757c154
patch 8.0.1681: the format attribute fails with MinGW
...
Problem: The format attribute fails with MinGW. (John Marriott)
Solution: Don't use the format attribute with MinGW.
2018-04-10 12:42:44 +02:00
756ef113d1
patch 8.0.1680: memory allocated by libvterm is not profiled
...
Problem: Memory allocated by libvterm does not show up in profile.
Solution: Pass allocater functions to vterm_new().
2018-04-10 12:04:27 +02:00
672afb9f66
patch 8.0.1679: compiler warning for printf format
...
Problem: Compiler warning for printf format. (Chdiza)
Solution: Change type to "long long". (closes #2791 )
2018-04-08 16:34:22 +02:00
e333e79f9b
patch 8.0.1678: errorformat "%r" implies "%>"
...
Problem: Errorformat "%r" implies "%>". (Jan Gosmann)
Solution: Jump to before setting fmt_ptr. (Yegappan Lakshmanan,
closes #2785 )
2018-04-08 13:27:39 +02:00
ea39176baa
patch 8.0.1677: no compiler warning for wrong format in vim_snprintf()
...
Problem: No compiler warning for wrong format in vim_snprintf().
Solution: Add printf attribute for gcc. Fix reported problems.
2018-04-08 13:07:22 +02:00
4ac2e8d8e6
patch 8.0.1676: no compiler warning for wrong printf format
...
Problem: No compiler warning for wrong printf format.
Solution: Add a printf attribute for gcc. Fix reported problems. (Dominique
Pelle, closes #2789 )
2018-04-08 12:38:26 +02:00
8200829141
patch 8.0.1675: unused macro argument in libvterm
...
Problem: Unused macro argument in libvterm. (Randall W. Morris)
Solution: Remove the argument.
2018-04-08 12:17:04 +02:00
77557a7ae6
patch 8.0.1674: libvterm can't handle an OSC string split
...
Problem: Libvterm can't handle a long OSC string that is split.
Solution: When an incomplete OSC string is received copy it to the parser
buffer. Increase the size of the parser buffer to be able to
handle longer strings.
2018-04-07 21:42:56 +02:00
4791015e6f
patch 8.0.1673: terminal window tests are still a bit flaky
...
Problem: Terminal window tests are still a bit flaky.
Solution: Increase the waiting time even more. (Elimar Riesebieter)
2018-04-07 19:27:16 +02:00
72532d354e
patch 8.0.1672: error during completion causes command to be cancelled
...
Problem: Error during completion causes command to be cancelled.
Solution: Reset did_emsg before waiting for another character. (Tom M.)
2018-04-07 19:09:09 +02:00
22efba47de
patch 8.0.1671: crash when passing non-dict argument as env to job_start()
...
Problem: Crash when passing non-dict argument as env to job_start().
Solution: Check for valid argument. (Ozaki Kiichi, closes #2765 )
2018-04-07 13:22:21 +02:00
b6ed74fef8
patch 8.0.1670: terminal window tests are still a bit flaky
...
Problem: Terminal window tests are still a bit flaky.
Solution: Increase the waiting time for the buffer to be created.
2018-04-07 10:42:14 +02:00
e1bb879f49
patch 8.0.1669: :vimgrep may add entries to the wrong quickfix list
...
Problem: :vimgrep may add entries to the wrong quickfix list.
Solution: Use the list identifier. (Yegappan Lakshmanan)
2018-04-06 22:58:23 +02:00
c4b533e1e9
patch 8.0.1668: terminal debugger: can't re-open source code window
...
Problem: Terminal debugger: can't re-open source code window.
Solution: Add the :Source command. Also create the window if needed when
gdb stops at a source line.
2018-04-06 22:26:25 +02:00
3680bab7e7
patch 8.0.1667: terminal window tests are flaky
...
Problem: Terminal window tests are flaky.
Solution: Increase the waiting time for Vim to start.
2018-04-06 20:22:06 +02:00
51ad4eaa22
Update runtime files
2018-04-06 11:14:11 +02:00
d5359b24ce
patch 8.0.1666: % argument in ch_log() causes trouble
...
Problem: % argument in ch_log() causes trouble.
Solution: Use string as third argument in internal ch_log(). (Dominique
Pelle, closes #2784 )
2018-04-05 22:44:39 +02:00
9a993e3c09
patch 8.0.1665: when running a terminal from the GUI 'term' is not useful
...
Problem: When running a terminal from the GUI 'term' is not useful.
Solution: Use $TERM in the GUI if it starts with "xterm". (closes #2776 )
2018-04-05 22:15:22 +02:00
3aa67fb453
patch 8.0.1664: test failure because of not allocating enough space
...
Problem: Test failure because of not allocating enough space.
Solution: Allocate more bytes.
2018-04-05 21:04:15 +02:00
86676c949f
patch 8.0.1663: cannot build without multi-byte feature
...
Problem: Cannot build without multi-byte feature.
Solution: Add #ifdef.
2018-04-05 18:56:48 +02:00
4a69634b1b
patch 8.0.1662: showing dump diff doesn't mention both file names
...
Problem: Showing dump diff doesn't mention both file names.
Solution: Add the file name in the separator line.
2018-04-05 18:45:26 +02:00
878c96d5b9
patch 8.0.1661: warnings from 64 bit compiler
...
Problem: Warnings from 64 bit compiler.
Solution: Add type casts. (Mike Williams)
2018-04-04 23:00:06 +02:00
333b80acf3
patch 8.0.1660: the terminal API "drop" command doesn't support options
...
Problem: The terminal API "drop" command doesn't support options.
Solution: Implement the options.
2018-04-04 22:57:29 +02:00
1f8495cf48
patch 8.0.1659: scroll events not recognized for some xterm emulators
...
Problem: Scroll events not recognized for some xterm emulators.
Solution: Recognize mouse codes 0x40 and 0x41 as scroll events.
2018-04-04 21:53:11 +02:00
79cf7c0d45
patch 8.0.1658: capitalize argument not available in long form
...
Problem: Capitalize argument not available in long form.
Solution: Recognize -capitalize. Update man page.
2018-04-03 14:21:16 +02:00
9af9778209
patch 8.0.1657: crash when reading a channel
...
Problem: Crash when reading a channel.
Solution: Clear the write flag before writing. (idea by Shinya Ohyanagi,
closes #2769 ).
2018-04-03 12:51:01 +02:00
8b31a6ff7a
patch 8.0.1656: no option to have xxd produce upper case variable names
...
Problem: No option to have xxd produce upper case variable names.
Solution: Add the -C argument. (Matt Panaro closes #2772 )
2018-04-03 12:17:25 +02:00
25a6e8a769
Small runtime update
2018-03-30 12:27:32 +02:00
f3ba14ffd3
patch 8.0.1655: outdated gdb message in terminal debugger unclear
...
Problem: Outdated gdb message in terminal debugger unclear.
Solution: Specifically mention the required gdb version. Avoid getting
stuck on pagination.
2018-03-29 18:29:51 +02:00
ab943431d8
Update runtime files
2018-03-29 18:27:07 +02:00
7b24ce08fe
patch 8.0.1654: warnings for conversion of void to function pointer
...
Problem: Warnings for conversion of void to function pointer.
Solution: Use a temp variable that is a function pointer.
2018-03-29 18:15:26 +02:00
1834d37396
patch 8.0.1653: screen dump is made too soon
...
Problem: Screen dump is made too soon.
Solution: Wait until the ruler is displayed. (Ozaki Kiichi, closes #2755 )
2018-03-29 17:40:46 +02:00
f06b0b6c8f
patch 8.0.1652: term_dumpwrite() does not output composing characters
...
Problem: term_dumpwrite() does not output composing characters.
Solution: Use the cell index.
2018-03-29 17:22:24 +02:00
0751f51a5b
patch 8.0.1651: cannot filter :ls output for terminal buffers
...
Problem: Cannot filter :ls output for terminal buffers.
Solution: Add flags for terminal buffers. (Marcin Szamotulski, closes #2751 )
2018-03-29 16:37:16 +02:00
0c72fe4ed8
patch 8.0.1650: too many #ifdefs
...
Problem: Too many #ifdefs.
Solution: Graduate FEAT_LISTCMDS, no reason to leave out buffer commands.
2018-03-29 16:04:08 +02:00
cd43effeca
patch 8.0.1649: no completion for argument list commands
...
Problem: No completion for argument list commands.
Solution: Add arglist completion. (Yegappan Lakshmanan, closes #2706 )
2018-03-29 15:55:38 +02:00
1b2f61e732
patch 8.0.1648: resource fork tool doesn't work on Python 3
...
Problem: Resource fork tool doesn't work on Python 3.
Solution: Use "print()" instead of "print". (Marius Gedminas)
2018-03-27 21:12:01 +02:00
2a77d21f78
patch 8.0.1647: terminal API may call any user function
...
Problem: Terminal API may call a function not meant to be called by this
API.
Solution: Require the function to start with Tapi_.
2018-03-26 21:38:52 +02:00
4368d5ce8a
patch 8.0.1646: MS-Windows: executable contains unreferenced functions
...
Problem: MS-Windows: executable contains unreferenced functions and data.
Solution: Add /opt:ref to the compiler command. (Ken Takata)
2018-03-26 20:55:10 +02:00
086eb87695
patch 8.0.1645: test for terminal response to escape sequence may fail
...
Problem: Test for terminal response to escape sequence fails for some
people. (toothpik)
Solution: Run "cat" and let it echo the characters.
2018-03-25 21:24:12 +02:00
cf67a509e9
patch 8.0.1644: terminal API tests still fail
...
Problem: Terminal API tests still fail.
Solution: Explicitly set 'title' in the terminal job. (Ozaki Kiichi,
closes #2750 )
2018-03-25 20:31:32 +02:00
2de50f8762
patch 8.0.1643: terminal API tests fail
...
Problem: Terminal API tests fail.
Solution: Explicitly set 'title'.
2018-03-25 19:09:56 +02:00
15a1c3fdc1
patch 8.0.1642: running Vim in terminal fails with two windows
...
Problem: Running Vim in terminal fails with two windows.
Solution: Pass the number of rows to RunVimInTerminal().
2018-03-25 18:56:25 +02:00
8fbaeb195d
patch 8.0.1641: job in terminal can't communicate with Vim
...
Problem: Job in terminal can't communicate with Vim.
Solution: Add the terminal API.
2018-03-25 18:20:17 +02:00
65873846e0
patch 8.0.1640: Test_cwd() is flaky
...
Problem: Test_cwd() is flaky.
Solution: Add to list of flaky tests.
2018-03-25 17:12:58 +02:00
b5b49a3b43
patch 8.0.1639: libvterm code lags behind master
...
Problem: Libvterm code lags behind master.
Solution: Sync to head, solve merge problems.
2018-03-25 16:20:37 +02:00
e7499ddc33
patch 8.0.1638: popup test fails depending on environment variable
...
Problem: Popup test fails depending on environment variable.
Solution: Reset $COLORFGBG when running Vim in a terminal. (closes #2693 )
2018-03-24 17:56:13 +01:00
897e63c4c0
patch 8.0.1637: no test for term_dumpdiff() options argument
...
Problem: No test for term_dumpdiff() options argument.
Solution: Add a test.
2018-03-24 17:16:33 +01:00
45d2a64f96
patch 8.0.1636: no test for term_dumpload() and term_dumpdiff()
...
Problem: No test for term_dumpload() and term_dumpdiff().
Solution: Add tests.
2018-03-24 14:30:32 +01:00
16d7eced1a
patch 8.0.1635: undefining _POSIX_THREADS causes problems with Python 3
...
Problem: Undefining _POSIX_THREADS causes problems with Python 3. (Micah
Bucy, closes #2748 )
Solution: Remove the lines.
2018-03-24 14:06:15 +01:00
75b0a888e4
patch 8.0.1634: the ex_vimgrep() function is too long
...
Problem: The ex_vimgrep() function is too long.
Solution: Split it in smaller functions. (Yegappan Lakshmanan)
2018-03-24 14:01:56 +01:00
8c64a36e40
patch 8.0.1633: a TextChanged autocmd triggers when it is defined
...
Problem: A TextChanged autocmd triggers when it is defined after creating a
buffer.
Solution: Set b_last_changedtick when opening a buffer. (Hirohito Highlight,
closes #2742 )
2018-03-23 22:39:31 +01:00
47015b80a0
patch 8.0.1632: in a terminal dump NUL and space are different
...
Problem: In a terminal dump NUL and space considered are different,
although they are displayed the same.
Solution: When encountering NUL handle it like space.
2018-03-23 22:10:34 +01:00
948a796bfe
patch 8.0.1631: testing with Vim running in terminal is a bit flaky
...
Problem: Testing with Vim running in terminal is a bit flaky.
Solution: Delete any .swp file so that later tests don't fail.
2018-03-23 20:37:45 +01:00
295ac5ab5e
patch 8.0.1630: trimming white space is not that easy
...
Problem: Trimming white space is not that easy.
Solution: Add the trim() function. (Bukn, closes #1280 )
2018-03-22 23:04:02 +01:00
62b7f6a139
patch 8.0.1629: Mac: getpagesize() is deprecated
...
Problem: Mac: getpagesize() is deprecated.
Solution: Use sysconf() instead. (Ozaki Kiichi, closes #2741 )
2018-03-22 21:44:07 +01:00
0bd052ba12
patch 8.0.1628: channel log doesn't mention exiting
...
Problem: Channel log doesn't mention exiting.
Solution: Add a ch_log() call in getout().
2018-03-22 20:33:56 +01:00
7735dafb58
patch 8.0.1627: compiler warning for visibility attribute not supported
...
Problem: Compiler warning for visibility attribute not supported on MinGW
builds.
Solution: Don't add the attribute when we don't expect it to work.
(Christian Brabandt)
2018-03-22 20:26:50 +01:00
b571c63d48
patch 8.0.1626: compiler warning for possible loss of data
...
Problem: Compiler warning for possible loss of data.
Solution: Use size_t instead of int. (Christian Brabandt)
2018-03-21 22:27:59 +01:00
29dfa5af3c
patch 8.0.1625: test_quotestar is flaky when run in GTK GUI
...
Problem: Test_quotestar is flaky when run in GTK GUI.
Solution: Do not call lose_selection when invoked from
selection_clear_event().
2018-03-20 21:24:45 +01:00
5a3a49ed59
patch 8.0.1624: options for term_dumpdiff() and term_dumpload() not implemented
...
Problem: Options for term_dumpdiff() and term_dumpload() not implemented
yet.
Solution: Implement the relevant options.
2018-03-20 18:35:53 +01:00
3e8d385347
patch 8.0.1623: terminal kill tests are flaky
...
Problem: Terminal kill tests are flaky.
Solution: Instead of running Vim in a terminal, run it as a normal command.
2018-03-20 17:43:01 +01:00
6ed86ad170
patch 8.0.1622: possible NULL pointer dereference
...
Problem: Possible NULL pointer dereferencey. (Coverity)
Solution: Reverse the check for a NULL pointer.
2018-03-20 13:30:42 +01:00
6185903e3d
patch 8.0.1621: using invalid default value for highlight attribute
...
Problem: Using invalid default value for highlight attribute.
Solution: Use zero instead of -1.
2018-03-20 13:00:25 +01:00
e26e0d2b83
patch 8.0.1620: reading spell file has no good EOF detection
...
Problem: Reading spell file has no good EOF detection.
Solution: Check for EOF at every character read for a length field.
2018-03-20 12:34:04 +01:00
81c3c89a28
patch 8.0.1619: Win32 GUI: crash when winpty is not installed
...
Problem: Win32 GUI: crash when winpty is not installed and trying to use
:shell in a terminal window.
Solution: Check for NULL return form term_start(). (Yasuhiro Matsumoto,
closes #2727 )
2018-03-20 11:41:44 +01:00
ecadf4377f
patch 8.0.1618: color Grey50 is missing in the compiled-in table
...
Problem: Color Grey50, used for ToolbarLine, is missing in the compiled-in
table.
Solution: Add the color to the list. (Kazunobu Kuriyama)
2018-03-20 11:17:04 +01:00
42f652f733
patch 8.0.1617: Win32: :shell command in the GUI crashes
...
Problem: Win32: :shell command in the GUI crashes.
Solution: Handle the situation that "cmd" is NULL. (Yasuhiro Matsumoto,
closes #2721 )
2018-03-19 21:44:37 +01:00
f05fa37822
patch 8.0.1616: Win32: shell commands in the GUI open a new console
...
Problem: Win32: shell commands in the GUI open a new console.
Solution: Use a terminal window for interactive use when 'guioptions'
contains "!".
2018-03-18 19:29:34 +01:00
52acb110ac
patch 8.0.1615: term_dumpload() does not use the right colors
...
Problem: term_dumpload() does not use the right colors.
Solution: Initialize colors when not using create_vterm().
2018-03-18 19:20:22 +01:00
98ef233e14
Update runtime files. Convert a couple of help files to utf-8.
2018-03-18 14:44:37 +01:00
9ef2a30e6f
patch 8.0.1614: "make tags" doesn't include libvterm
...
Problem: "make tags" doesn't include libvterm.
Solution: Add the libvterm sources to the tags command.
2018-03-17 15:55:26 +01:00
a2150ac016
patch 8.0.1613: warning for unused variable in tiny build
...
Problem: Warning for unused variable in tiny build. (Tony Mechelynck)
Solution: Move declaration to inner block.
2018-03-17 13:15:17 +01:00
1dd98334d6
patch 8.0.1612: need to close terminal after shell stopped
...
Problem: Need to close terminal after shell stopped.
Solution: Make :terminal without argument close the window by default.
2018-03-16 22:54:53 +01:00
af23bad0fd
patch 8.0.1611: CTRL-W in system terminal does not go to job
...
Problem: CTRL-W in system terminal does not go to job.
Solution: Do not use CTRL-W as a terminal command in a system terminal.
2018-03-16 22:20:49 +01:00
4ac31eeff0
patch 8.0.1610: cannot build without GUI
...
Problem: Cannot build without GUI.
Solution: Add #ifdef.
2018-03-16 21:34:25 +01:00
135682517b
patch 8.0.1609: shell commands in the GUI use a dumb terminal
...
Problem: Shell commands in the GUI use a dumb terminal.
Solution: Add the "!" flag to 'guioptions' to execute system commands in a
special terminal window. Only for Unix now.
2018-03-16 20:46:58 +01:00
43cb626214
patch 8.0.1608: Win32: directx not enabled by default
...
Problem: Win32: directx not enabled by default.
Solution: Change Makefile to enable directx by default. (Ken Takata)
2018-03-14 21:39:02 +01:00
62dd452d02
patch 8.0.1607: --clean loads user settings from .gvimrc
...
Problem: --clean loads user settings from .gvimrc.
Solution: Behave like "-U NONE" was used. (Ken Takata)
2018-03-14 21:20:02 +01:00
228de1dfd2
patch 8.0.1606: singular/plural variants not translated
...
Problem: Singular/plural variants not translated.
Solution: Add NGETTEXT argument to xgettext. (Sergey Alyoshin)
2018-03-14 20:11:12 +01:00
012eb66293
patch 8.0.1605: terminal test is a bit flaky
...
Problem: Terminal test is a bit flaky.
Solution: Check for the shell prompt. Use more lambda functions.
2018-03-13 17:55:27 +01:00
a903472cfa
patch 8.0.1604: paste test may fail if $DISPLAY is not set
...
Problem: Paste test may fail if $DISPLAY is not set.
Solution: Add WorkingClipboard() and use it in the paste test.
2018-03-13 15:43:46 +01:00
f118d4847e
patch 8.0.1603: cannot build with +terminal but without +menu
...
Problem: Cannot build with +terminal but without +menu.
Solution: Add #ifdef. (Damien)
2018-03-13 13:14:00 +01:00
625f0c1eb7
patch 8.0.1602: crash in parsing JSON
...
Problem: Crash in parsing JSON.
Solution: Fail when using array or dict as dict key. (Damien)
2018-03-13 13:10:41 +01:00
ff1e879577
patch 8.0.1601: highlight test fails on Win32
...
Problem: Highlight test fails on Win32.
Solution: Check for vtp and vcon support.
2018-03-12 22:16:37 +01:00
f708ac592f
patch 8.0.1600: crash when setting t_Co to zero when 'termguicolors' is set
...
Problem: Crash when setting t_Co to zero when 'termguicolors' is set.
Solution: Use IS_CTERM instead of checking the number of colors.
(closes #2710 )
2018-03-12 21:48:32 +01:00
3e4b84d0b5
patch 8.0.1599: no error message when gdb does not support debugger
...
Problem: No error message when gdb does not support the terminal debugger.
Solution: Check for the response to open the Machine Interface.
2018-03-11 20:51:52 +01:00
c48369c3fc
patch 8.0.1598: cannot select text in a terminal with the mouse
...
Problem: Cannot select text in a terminal with the mouse.
Solution: When a job in a terminal is not consuming mouse events, use them
for modeless selection. Also stop Insert mode when clicking in a
terminal window.
2018-03-11 19:30:45 +01:00
e87303af32
patch 8.0.1597: autocommand events are not sorted
...
Problem: Autocommand events are not sorted.
Solution: Sort the autocommand events.
2018-03-11 17:02:12 +01:00
b852c3e64d
patch 8.0.1596: no autocommand specifically for opening a terminal window
...
Problem: No autocommand specifically for opening a terminal window.
Solution: Add TerminalOpen. (?, closes #2484 )
2018-03-11 16:55:36 +01:00
12a96de430
patch 8.0.1595: no autocommand triggered before exiting
...
Problem: No autocommand triggered before exiting.
Solution: Add the ExitPre autocommand event.
2018-03-11 14:44:18 +01:00
435acdb88c
patch 8.0.1594: :conform qall not tested with active terminal window
...
Problem: :conform qall not tested with active terminal window.
Solution: Add a test.
2018-03-10 20:51:25 +01:00
25cdd9c33b
patch 8.0.1593: :qall never exits with an active terminal window
...
Problem: :qall never exits with an active terminal window.
Solution: Add a way to kill a job in a terminal window.
2018-03-10 20:28:12 +01:00
b5b7562475
Update runtime files.
2018-03-09 22:22:21 +01:00
4d8bac8bf5
patch 8.0.1592: terminal windows in a session are not properly restored
...
Problem: Terminal windows in a session are not properly restored.
Solution: Add "terminal" in 'sessionoptions'. When possible restore the
command running in a terminal.
2018-03-09 21:33:34 +01:00
20586cb4f4
patch 8.0.1591: MS-Windows: when reparsing the arguments 'wildignore' matters
...
Problem: MS-Windows: when reparsing the arguments 'wildignore' matters.
Solution: Save and reset 'wildignore'. (Yasuhiro Matsumoto, closes #2702 )
2018-03-08 22:03:14 +01:00
1a84024037
patch 8.0.1590: padding in list type wastes memory
...
Problem: Padding in list type wastes memory.
Solution: Reorder struct members to optimize padding. (Dominique Pelle,
closes #2704 )
2018-03-08 21:46:43 +01:00
d7db27bafd
patch 8.0.1589: error for setting 'modifiable' when resetting it
...
Problem: Error for setting 'modifiable' when resetting it.
Solution: Check if 'modifiable' was actually set.
2018-03-07 23:02:33 +01:00
52f18a112a
patch 8.0.1588: popup menu hangs after typing CTRL-C
...
Problem: Popup menu hangs after typing CTRL-C.
Solution: Make CTRL-C exit the loop. (Ozaki Kiichi, closes #2697 )
2018-03-07 22:09:11 +01:00
3324d0a864
patch 8.0.1587: inserting from the clipboard doesn't work literally
...
Problem: inserting from the clipboard doesn't work literally
Solution: When pasting from the * or + register always assume literally.
2018-03-06 19:51:13 +01:00
201dc67db5
patch 8.0.1586: imactivatefunc does not work on non-GUI Mac
...
Problem: Imactivatefunc does not work on non-GUI Mac.
Solution: Fix logic in #ifdef.
2018-03-06 18:59:57 +01:00
ebf142a1ed
patch 8.0.1585: enabling beval_term feature in Win32 GUI
...
Problem: Enabling beval_term feature in Win32 GUI.
Solution: Only enable beval_term in Win32 console.
2018-03-06 18:20:03 +01:00
f536bf6d45
patch 8.0.1584: using C99 in Mac file gives compiler warning messages
...
Problem: Using C99 in Mac file gives compiler warning messages.
Solution: Add #prama's to avoid the warnings. (Kazunobu Kuriyama)
2018-03-06 17:55:01 +01:00
fc6f16b57c
patch 8.0.1583: using C99 comment
...
Problem: Using C99 comment.
Solution: Use old style comment. (Kazunobu Kuriyama)
2018-03-06 17:43:22 +01:00
157d813be4
patch 8.0.1582: in the MS-Windows console mouse movement is not used
...
Problem: In the MS-Windows console mouse movement is not used.
Solution: Pass mouse movement events when useful.
2018-03-06 17:09:20 +01:00
3b3a9a5609
patch 8.0.1581: cannot build Win32 GUI without +eval
...
Problem: Cannot build Win32 GUI without +eval.
Solution: Define HAVE_INPUT_METHOD without +eval. (Ken Takata)
2018-03-06 16:11:47 +01:00
946acdac5b
patch 8.0.1580: FEAT_CURSORBIND and FEAT_SCROLLBIND are unused
...
Problem: FEAT_CURSORBIND and FEAT_SCROLLBIND are unused.
Solution: Delete them.
2018-03-06 15:06:19 +01:00
df0d24b627
patch 8.0.1579: virtual replace test fails in GUI
...
Problem: Virtual replace test fails in GUI.
Solution: Don't save key options if they were not set.
2018-03-06 14:22:58 +01:00
69f5a3011d
patch 8.0.1578: no test for :popup in terminal
...
Problem: No test for :popup in terminal.
Solution: Add a screen dump test.
2018-03-06 13:23:08 +01:00
e780848150
patch 8.0.1577: virtual replace test fails on MS-Windows
...
Problem: Virtual replace test fails on MS-Windows.
Solution: Make adding a termcap entry work for a builtin terminal.
Restore terminal keys in a better way.
2018-03-06 13:17:23 +01:00
16896a1019
patch 8.0.1576: Perl VIM::Buffers() does not find every buffer
...
Problem: Perl VIM::Buffers() does not find every buffer.
Solution: Also find unlisted buffer by number or name. (Chris Weyl,
closes #2692 )
2018-03-06 12:25:56 +01:00
63e82db6fc
patch 8.0.1575: crash when using virtual replace
...
Problem: Crash when using virtual replace.
Solution: Adjust orig_line_count. Add more tests. (Christian Brabandt)
2018-03-06 12:10:48 +01:00
987723e084
patch 8.0.1574: show cursor in wrong place when using popup menu
...
Problem: Show cursor in wrong place when using popup menu. (Wei Zhang)
Solution: Force updating the cursor position. Fix skipping over unused
entries.
2018-03-06 11:43:04 +01:00
89894aa671
patch 8.0.1573: getwinpos(1) may cause response to be handled as command
...
Problem: getwinpos(1) may cause response to be handled as command.
Solution: Handle any cursor position report once one was request. (partly by
Hirohito Higashi)
2018-03-05 22:43:10 +01:00
362dc33835
patch 8.0.1572: Mac: getting memory size doesn't work everywhere
...
Problem: Mac: getting memory size doesn't work everywhere.
Solution: Use MACOS_X instead of MACOS_X_DARWIN. (Kazunobu Kuriyama)
2018-03-05 21:59:37 +01:00
40d77b0ec1
patch 8.0.1571: can't build without GUI
...
Problem: Can't build without GUI.
Solution: Adjust #ifdef for gui_find_menu().
2018-03-05 21:32:27 +01:00
29a2c08d79
patch 8.0.1570: can't use :popup for a menu in the terminal
...
Problem: Can't use :popup for a menu in the terminal. (Wei Zhang)
Solution: Make :popup work in the terminal. Also fix that entries were
included that don't work in the current state.
2018-03-05 21:06:23 +01:00
28ada699c1
patch 8.0.1569: warning for uninitialized variable from gcc
...
Problem: Warning for uninitialized variable from gcc.
Solution: Initialize the variable.
2018-03-05 12:42:42 +01:00
24fe475894
patch 8.0.1568: can't build on older Mac, header file is missing
...
Problem: Can't build on older Mac, header file is missing.
Solution: Remove the header file. (Ozaki Kiichi, closes #2691 )
2018-03-05 10:54:53 +01:00
6e35a11490
patch 8.0.1567: cannot build Win32 GUI without IME
...
Problem: Cannot build Win32 GUI without IME. (John Marriott)
Solution: Adjust when IME_WITHOUT_XIM and HAVE_INPUT_METHOD are defined and
use it in a few more places.
2018-03-04 21:36:05 +01:00
8a3bb56230
patch 8.0.1566: too many #ifdefs
...
Problem: Too many #ifdefs.
Solution: Graduate FEAT_SCROLLBIND and FEAT_CURSORBIND.
2018-03-04 20:14:14 +01:00
107279c17b
patch 8.0.1565: can't build Mac version without GUI
...
Problem: Can't build Mac version without GUI.
Solution: Adjust when IME_WITHOUT_XIM is defined.
2018-03-04 18:57:19 +01:00
f2bd8ef2b4
patch 8.0.1564: too many #ifdefs
...
Problem: Too many #ifdefs.
Solution: Graduate the +autocmd feature. Takes away 450 #ifdefs and
increases code size of tiny Vim by only 40 Kbyte.
2018-03-04 18:08:14 +01:00
3f54fd319f
patch 8.0.1563: timeout of getwinposx() can be too short
...
Problem: Timeout of getwinposx() can be too short. (lilydjwg)
Solution: Add getwinpos(). (closes #2689 )
2018-03-03 21:29:55 +01:00
71137fed4d
patch 8.0.1562: the terminal debugger can't set a breakpoint with the mouse
...
Problem: The terminal debugger can't set a breakpoint with the mouse.
Solution: Add popup menu entries.
2018-03-03 20:47:21 +01:00
069dafc1de
patch 8.0.1561: crash with rust syntax highligting
...
Problem: Crash with rust syntax highligting. (Edd Barrett)
Solution: Avoid going past the end of an empty line.
2018-03-03 20:02:19 +01:00
3767b61ad9
patch 8.0.1560: build failure without GUI on MS-Windows
...
Problem: Build failure without GUI on MS-Windows.
Solution: Adjust #ifdef for vcol2col().
2018-03-03 19:51:58 +01:00
658a154cbf
patch 8.0.1559: build failure without GUI
...
Problem: Build failure without GUI.
Solution: Adjust #ifdef for get_fpos_of_mouse().
2018-03-03 19:29:43 +01:00
aef8c3da2b
patch 8.0.1558: no right-click menu in a terminal
...
Problem: No right-click menu in a terminal.
Solution: Implement the right click menu for the terminal.
2018-03-03 18:59:16 +01:00
c71807db9c
patch 8.0.1557: printf() does not work with only one argument
...
Problem: printf() does not work with only one argument. (Daniel Hahler)
Solution: Allow using just the format. (Ken Takata, closes #2687 )
2018-03-03 15:06:52 +01:00
590ec878a5
patch 8.0.1556: may not parse the t_RS response correctly
...
Problem: May not parse the t_RS response correctly, resulting in wrong
characters in the input stream.
Solution: When the t_RS response is partly received wait for more
characters.
2018-03-02 20:58:42 +01:00
77780b66f4
patch 8.0.1555: build error for some combination of features
...
Problem: Build error for some combination of features.
Solution: Declare variable in more situations.
2018-03-01 23:10:45 +01:00
0726870326
patch 8.0.1554: custom plugins loaded with --clean
...
Problem: Custom plugins loaded with --clean.
Solution: Do not include the home directory in 'runtimepath'.
2018-03-01 21:57:32 +01:00
5f73ef8d20
patch 8.0.1553: cannot see what digraph is used to insert a character
...
Problem: Cannot see what digraph is used to insert a character.
Solution: Show the digraph with the "ga" command. (Christian Brabandt)
2018-02-27 21:09:30 +01:00
8195247054
patch 8.0.1552: may leak file descriptors when executing job
...
Problem: May leak file descriptors when executing job.
Solution: Close more file descriptors. (Ozaki Kiichi, closes #2531 )
2018-02-27 19:10:00 +01:00
988615f26f
patch 8.0.1551: on Mac 'maxmemtot' is set to a weird value
...
Problem: On Mac 'maxmemtot' is set to a weird value.
Solution: For Mac use total memory and subtract system memory. For other
systems accept both a 32 bit and 64 bit result. (Ozaki Kiichi,
closes #2646 )
2018-02-27 17:58:20 +01:00
792f0e3659
patch 8.0.1550: various small problems in source files
...
Problem: Various small problems in source files.
Solution: Fix the problems.
2018-02-27 17:27:13 +01:00
5d7ead3bc8
patch 8.0.1549: various small problems in test files
...
Problem: Various small problems in test files.
Solution: Include small changes.
2018-02-27 17:17:42 +01:00
3ad8772ef0
Include Serbian spell input files
2018-02-27 17:11:01 +01:00
75542ec9f6
patch 8.0.1548: screen dump test script not included in distribution
...
Problem: Screen dump test script not included in distribution.
Solution: Add the script to the list of distributed files.
2018-02-27 17:07:43 +01:00
9c474b2773
patch 8.0.1547: undo in the options window makes it empty
...
Problem: Undo in the options window makes it empty.
Solution: Set 'undolevels' while filling the buffer. (Yasuhiro Matthew,
closes #2645 )
2018-02-27 17:04:25 +01:00
c8bcfe7efd
patch 8.0.1546: using feedkeys() in a terminal may trigger mappings
...
Problem: Using feedkeys() in a terminal window may trigger mappings.
(Charles Sheridan)
Solution: Avoid triggering a mapping when peeking for a key.
2018-02-27 16:29:28 +01:00
8226ac6b59
patch 8.0.1545: screen dumps not included in distribution
...
Problem: Screen dumps not included in distribution.
Solution: Add dumps to the list of distributed files.
2018-02-27 14:54:53 +01:00
22f1d0e35e
Updated runtime files.
...
Add Serbian translations and spell checking.
2018-02-27 14:53:30 +01:00
d4fc577e60
patch 8.0.1544: when using 'termguicolors' SpellBad doesn't show
...
Problem: When using 'termguicolors' SpellBad doesn't show.
Solution: When the GUI colors are not set fall back to the cterm colors.
2018-02-27 14:39:03 +01:00
33ef5bb0e4
patch 8.0.1543: with 'termguicolors' Normal color doesn't work correctly
...
Problem: With 'termguicolors' Normal color doesn't work correctly.
Solution: Set cterm_normal_bg_gui_color and cterm_normal_fg_color always.
(Kazunobu Kuriyama, closes #981 , closes #2332 )
2018-02-27 13:04:59 +01:00
9271d058c9
patch 8.0.1542: terminal screen dump does not include cursor position
...
Problem: Terminal screen dump does not include cursor position.
Solution: Mark the cursor position in the cump.
2018-02-25 21:39:46 +01:00
36f923014a
patch 8.0.1541: synpat_T is taking too much memory
...
Problem: synpat_T is taking too much memory.
Solution: Reorder members to reduce padding. (Dominique Pelle, closes #2671 )
2018-02-24 21:36:34 +01:00
2b10bcbfc1
patch 8.0.1540: popup menu positioning fails with longer string
...
Problem: Popup menu positioning fails with longer string.
Solution: Only align with right side of window when width is less than
'pumwidth' (closes #2661 )
2018-02-24 21:25:44 +01:00
6bb2cdfe60
patch 8.0.1539: no test for the popup menu positioning
...
Problem: No test for the popup menu positioning.
Solution: Add a screendump test for the popup menu.
2018-02-24 19:53:53 +01:00
bb008dd323
patch 8.0.1538: popupmenu is too far left when completion is long
...
Problem: Popupmenu is too far left when completion is long. (Linwei)
Solution: Adjust column computations. (Hirohito Higashi, closes #2661 )
2018-02-24 18:59:55 +01:00
085346f5a1
patch 8.0.1537: xxd does not skip NUL lines when using ebcdic
...
Problem: Xxd does not skip NUL lines when using ebcdic.
Solution: Check for a NUL before converting a character for ebcdic. (Tim
Sell, closes #2668 )
2018-02-24 18:30:55 +01:00
791010e648
patch 8.0.1536: quotestar test is flaky when using the GUI
...
Problem: Quotestar test is flaky when using the GUI.
Solution: Add check that the star register arrived at the server. Increase
timeouts.
2018-02-24 17:42:28 +01:00
6acadda8d6
patch 8.0.1535: C syntax test still fails when using gvim
...
Problem: C syntax test still fails when using gvim.
Solution: Clear Normal cterm highlighting instead of setting it.
2018-02-24 16:51:32 +01:00
b7ea7cb8e4
patch 8.0.1534: C syntax test fails when using gvim
...
Problem: C syntax test fails when using gvim
Solution: Force running in a terminal. Check that 'background' is correct
even when $COLORFGBG is set.
2018-02-24 14:38:51 +01:00
674e482d13
patch 8.0.1533: libterm doesn't support requesting fg and bg color
...
Problem: Libterm doesn't support requesting fg and bg color.
Solution: Implement t_RF and t_RB.
2018-02-24 14:03:56 +01:00
cc0f2be880
patch 8.0.1532: compiler warnings without termguicolors feature
...
Problem: Compiler warnings without termguicolors feature.
Solution: Add #ifdef. (John Marriott) Cleanup the code a bit.
2018-02-23 18:23:30 +01:00
cafafb381a
patch 8.0.1531: cannot use 24 bit colors in MS-Windows console
...
Problem: Cannot use 24 bit colors in MS-Windows console.
Solution: Add support for vcon. (Nobuhiro Takasaki, Ken Takasaki,
fixes #1270 , fixes #2060 )
2018-02-22 21:07:09 +01:00
19eb6658ec
patch 8.0.1530: dump test fails when using a shadow directory
...
Problem: Dump test fails when using a shadow directory.
Solution: Add the directory to the list of symlinks to make (Elimar
Riesebieter)
2018-02-22 11:42:49 +01:00
3049418f3d
patch 8.0.1529: assert_equalfile() does not close file descriptors
...
Problem: Assert_equalfile() does not close file descriptors. (Coverity)
Solution: Close the file descriptors.
2018-02-20 21:46:05 +01:00
81226e0310
patch 8.0.1528: dead code found
...
Problem: Dead code found.
Solution: Remove the useless lines. (CodeAi, closes #2656 )
2018-02-20 21:44:45 +01:00
3cc9f7440d
patch 8.0.1527: screen dump test fails on MS-Windows
...
Problem: Screen dump test fails on MS-Windows.
Solution: Skip dump test on MS-Windows for now.
2018-02-20 17:09:16 +01:00
da65058a9c
patch 8.0.1526: no test using a screen dump yet
...
Problem: No test using a screen dump yet.
Solution: Add a test for C syntax highlighting. Add helper functions.
2018-02-20 15:51:40 +01:00
7a76092a51
patch 8.0.1525: using :wqa exits even if a job runs in a terminal window
...
Problem: Using :wqa exits even if a job runs in a terminal window. (Jason
Felice)
Solution: Check if a terminal has a running job. (closes #2654 )
2018-02-19 23:10:02 +01:00
9c8816bd30
patch 8.0.1524: compiler warnings for uninitialized variables
...
Problem: Compiler warnings for uninitialized variables. (Tony Mechelynck)
Solution: Initialize variables.
2018-02-19 21:50:42 +01:00
d96ff16511
patch 8.0.1523: cannot write and read terminal screendumps
...
Problem: Cannot write and read terminal screendumps.
Solution: Add term_dumpwrite(), term_dumpread() and term_dumpdiff().
Also add assert_equalfile().
2018-02-18 22:13:29 +01:00
4287ed33dd
patch 8.0.1522: popup menu is positioned in the wrong place
...
Problem: Popup menu is positioned in the wrong place. (Davit Samvelyan,
Boris Staletic)
Solution: Correct computation of the column and the conditions for that.
(Hirohito Higashi, closes #2640 )
2018-02-17 20:35:29 +01:00
73cddfd559
patch 8.0.1521: Shift-Tab does not work in a terminal window
...
Problem: Shift-Tab does not work in a terminal window.
Solution: Recognize Shift-Tab key press. (Jsees Luehrs, closes #2644 )
2018-02-16 20:01:04 +01:00
181ca99e16
patch 8.0.1520: cursor in wrong line when using a WinBar in Terminal window
...
Problem: Cursor is in the wrong line when using a WinBar in a Terminal
window.
Solution: Adjust the row number. (Christian Brabandt, closes #2362 )
2018-02-13 21:19:21 +01:00
341a64c9ca
patch 8.0.1519: getchangelist() does not use argument as bufname()
...
Problem: Getchangelist() does not use argument as bufname().
Solution: Use get_buf_tv(). (Yegappan Lakshmanan, closes #2641 )
2018-02-13 19:21:17 +01:00
2be5733152
patch 8.0.1518: error messages suppressed after ":silent! try"
...
Problem: Error messages suppressed after ":silent! try". (Ben Reilly)
Solution: Restore emsg_silent before executing :try. (closes #2531 )
2018-02-13 18:05:18 +01:00
bc197195b0
patch 8.0.1517: invalid memory acces with pattern using look-behind match
...
Problem: Invalid memory acces with pattern using look-behind match.
(Dominique Pelle)
Solution: Get a pointer to the right line.
2018-02-13 16:35:06 +01:00
b3292fa2d3
patch 8.0.1516: errors for job options are not very specific
...
Problem: Errors for job options are not very specific.
Solution: Add more specific error messages.
2018-02-13 15:17:58 +01:00
ab5e7c3deb
patch 8.0.1515: BufWinEnter event fired when opening hidden terminal
...
Problem: BufWinEnter event fired when opening hidden terminal.
Solution: Do not fire BufWinEnter when the terminal is midden and does not
open a window. (Kenta Sato, closes #2636 )
2018-02-13 14:07:18 +01:00
07ad816525
patch 8.0.1514: getting the list of changes is not easy
...
Problem: Getting the list of changes is not easy.
Solution: Add the getchangelist() function. (Yegappan Lakshmanan,
closes #2634 )
2018-02-13 13:59:59 +01:00
4867974137
patch 8.0.1513: the jumplist is not always properly cleaned up
...
Problem: The jumplist is not always properly cleaned up.
Solution: Call fname2fnum() before cleanup_jumplist(). (Yegappan Lakshmanan)
2018-02-13 13:33:29 +01:00
e4db7aedab
patch 8.0.1512: warning for possibly using NULL pointer
...
Problem: Warning for possibly using NULL pointer. (Coverity)
Solution: Skip using the pointer if it's NULL.
2018-02-13 13:12:11 +01:00
3198870137
patch 8.0.1511: some code for the debugger watch expression is clumsy
...
Problem: Some code for the debugger watch expression is clumsy.
Solution: Clean up the code.
2018-02-13 12:57:42 +01:00
b48e96f61c
patch 8.0.1510: cannot test if a command causes a beep
...
Problem: Cannot test if a command causes a beep.
Solution: Add assert_beeps().
2018-02-13 12:26:14 +01:00
294959528e
patch 8.0.1509: test for failing drag-n-drop command no longer fails
...
Problem: Test for failing drag-n-drop command no longer fails.
Solution: Check for the "dnd" feature.
2018-02-12 22:49:00 +01:00
5a656864a0
patch 8.0.1508: the :drop command is not always available
...
Problem: The :drop command is not always available.
Solution: Include :drop in all builds. (Yasuhiro Matsumoto, closes #2639 )
2018-02-12 22:08:06 +01:00
bfbea567d8
patch 8.0.1507: timer test is a bit flaky
...
Problem: Timer test is a bit flaky.
Solution: Add it to the list of flaky tests.
2018-02-12 21:31:35 +01:00
c19e1d1ba5
patch 8.0.1506: new version of HP NonStop (Tandem) doesn't like a header
...
Problem: New version of HP NonStop (Tandem) doesn't like the default header
for setenv().
Solution: Put a #ifdef around the setenv() entry. (Joachim Schmitz)
2018-02-12 20:58:11 +01:00
c6f9f739d3
patch 8.0.1505: debugger can't break on a condition
...
Problem: Debugger can't break on a condition. (Charles Campbell)
Solution: Add ":breakadd expr". (Christian Brabandt, closes #859 )
2018-02-11 19:06:26 +01:00
c33ecb2915
patch 8.0.1504: Win32: the screen may be cleared on startup
...
Problem: Win32: the screen may be cleared on startup.
Solution: Only call shell_resized() when the size actually changed. (Ken
Takata, closes #2527 )
2018-02-11 16:40:45 +01:00
cdd09aa51a
patch 8.0.1503: access memory beyond end of string
...
Problem: Access memory beyond end of string. (Coverity)
Solution: Keep allocated memory in separate pointer. Avoid outputting the
NUL character.
2018-02-11 15:38:40 +01:00
71a43c0137
patch 8.0.1502: in out-of-memory situation character is not restored
...
Problem: In out-of-memory situation character is not restored. (Coverity)
Solution: Restore the character in all situations.
2018-02-11 15:20:20 +01:00
a0221df149
patch 8.0.1501: out-of-memory situation not correctly handled
...
Problem: Out-of-memory situation not correctly handled. (Coverity)
Solution: Check for NULL value.
2018-02-11 15:07:22 +01:00
0549a1e184
patch 8.0.1500: possible NULL pointer dereference
...
Problem: Possible NULL pointer dereference. (Coverity)
Solution: Check for the pointer not being NULL.
2018-02-11 15:02:48 +01:00
4b7e7bed6c
patch 8.0.1499: out-of-memory situation not correctly handled
...
Problem: Out-of-memory situation not correctly handled. (Coverity)
Solution: Check for NULL value.
2018-02-11 14:53:30 +01:00
a7e18d237f
patch 8.0.1498: getjumplist() returns duplicate entries
...
Problem: Getjumplist() returns duplicate entries. (lacygoill)
Solution: Call cleanup_jumplist(). (Yegappan Lakshmanan)
2018-02-11 14:29:49 +01:00
4f50588ba3
patch 8.0.1497: getting the jump list requires parsing the output of :jumps
...
Problem: Getting the jump list requires parsing the output of :jumps.
Solution: Add getjumplist(). (Yegappan Lakshmanan, closes #2609 )
2018-02-10 21:06:32 +01:00
d23a823669
patch 8.0.1496: clearing a pointer takes two lines
...
Problem: Clearing a pointer takes two lines.
Solution: Add VIM_CLEAR() and replace vim_clear(). (Hirohito Higashi,
closes #2629 )
2018-02-10 18:45:26 +01:00
42443c7d7f
patch 8.0.1495: having 'pumwidth' default to zero has no merit
...
Problem: Having 'pumwidth' default to zero has no merit.
Solution: Make the default 15, as the actual default value.
2018-02-10 18:28:52 +01:00
5a09343719
patch 8.0.1494: no autocmd triggered in Insert mode with visible popup menu
...
Problem: No autocmd triggered in Insert mode with visible popup menu.
Solution: Add TextChangedP. (Prabir Shrestha, Christian Brabandt,
closes #2372 , closes #1691 )
Fix that the TextChanged autocommands are not always triggered
when sourcing a script.
2018-02-10 18:15:19 +01:00
9b56a57cda
patch 8.0.1493: completion items cannot be annotated
...
Problem: Completion items cannot be annotated.
Solution: Add a "user_data" entry to the completion item. (Ben Jackson,
coses #2608 , closes #2508 )
2018-02-10 16:19:32 +01:00
b301f6b950
patch 8.0.1492: memory leak in balloon_split()
...
Problem: Memory leak in balloon_split().
Solution: Free the balloon lines. Free the balloon when exiting.
2018-02-10 15:38:35 +01:00
a8f04aa275
patch 8.0.1491: the minimum width of the popup menu is hard coded
...
Problem: The minimum width of the popup menu is hard coded.
Solution: Add the 'pumwidth' option. (Christian Brabandt, James McCoy,
closes #2314 )
2018-02-10 15:36:55 +01:00
2993ac5fce
patch 8.0.1490: number of spell regions is spread out through the code
...
Problem: Number of spell regions is spread out through the code.
Solution: Define MAXREGIONS.
2018-02-10 14:12:43 +01:00
7254067ee9
Update runtime files.
2018-02-09 22:00:53 +01:00
5459129af2
patch 8.0.1489: there is no easy way to get the global directory
...
Problem: There is no easy way to get the global directory, esp. if some
windows have a local directory.
Solution: Make getcwd(-1) return the global directory. (Andy Massimino,
closes #2606 )
2018-02-09 20:53:59 +01:00
0d20737732
patch 8.0.1488: emacs tags no longer work
...
Problem: Emacs tags no longer work. (zdohnal)
Solution: Do not skip over end of line.
2018-02-09 19:25:29 +01:00
8846ac5aed
patch 8.0.1487: test 14 fails
...
Problem: Test 14 fails.
Solution: Fix of-by-one error.
2018-02-09 19:24:01 +01:00
82846a00ac
patch 8.0.1486: accessing invalid memory with "it"
...
Problem: Accessing invalid memory with "it". (Dominique Pelle)
Solution: Avoid going over the end of the line. (Christian Brabandt,
closes #2532 )
2018-02-09 18:09:54 +01:00
9e33efd152
patch 8.0.1485: weird autocmd may cause arglist to be changed recursively
...
Problem: Weird autocmd may cause arglist to be changed recursively.
Solution: Prevent recursively changing the argument list. (Christian
Brabandt, closes #2472 )
2018-02-09 17:50:28 +01:00
a15ef4588c
patch 8.0.1484: reduntant conditions
...
Problem: Reduntant conditions.
Solution: Remove them. (Dominique Pelle)
2018-02-09 16:46:00 +01:00
9d32276b52
patch 8.0.1483: searchpair() might return an invalid value on timeout
...
Problem: Searchpair() might return an invalid value on timeout.
Solution: When the second search times out, do not accept a match from the
first search. (Daniel Hahler, closes #2552 )
2018-02-09 16:04:25 +01:00
02ae9b4a93
patch 8.0.1482: using feedkeys() does not work to test completion
...
Problem: Using feedkeys() does not work to test Insert mode completion.
(Lifepillar)
Solution: Do not check for typed keys when executing :normal or feedkeys().
Fix thesaurus completion not working when 'complete' is empty.
2018-02-09 15:06:02 +01:00
1567558b20
patch 8.0.1481: clearing a pointer takes two lines
...
Problem: Clearing a pointer takes two lines.
Solution: Add vim_clear() to free and clear the pointer.
2018-02-09 12:29:56 +01:00
0562532c2e
patch 8.0.1480: patch missing change
...
Problem: Patch missing change.
Solution: Add missing change.
2018-02-09 12:28:00 +01:00
bc0e9adae9
patch 8.0.1479: insert mode completion state is confusing
...
Problem: Insert mode completion state is confusing.
Solution: Move ctrl_x_mode into edit.c. Add CTRL_X_NORMAL for zero.
2018-02-09 12:13:34 +01:00
dff72ba445
patch 8.0.1478: unnecessary condition
...
Problem: Unnecessary condition for "len" being zero.
Solution: Remove the condition. (Dominique Pelle)
2018-02-08 22:45:17 +01:00
d317b38a4d
patch 8.0.1477: redraw flicker when moving the mouse outside of terminal window
...
Problem: Redraw flicker when moving the mouse outside of terminal window.
Solution: Instead of updating the cursor color and shape every time leaving
and entering a terminal window, only update when different from
the previously used cursor.
2018-02-08 22:33:31 +01:00
acda04f5c6
patch 8.0.1476: screen isn't always updated right away
...
Problem: Screen isn't always updated right away.
Solution: Adjust #ifdef: Call out_flush() when not running the GUI.
2018-02-08 09:57:28 +01:00
f12519dec8
patch 8.0.1475: invalid memory access in read_redo()
...
Problem: Invalid memory access in read_redo(). (gy741)
Solution: Convert the replacement character back from a negative number to
CR or NL. (hint by Dominique Pelle, closes #2616 )
2018-02-06 22:52:49 +01:00
dd08b6a32b
patch 8.0.1474: Visual C 2017 has multiple MSVCVER numbers
...
Problem: Visual C 2017 has multiple MSVCVER numbers.
Solution: Assume the 2017 version if MSVCVER >= 1910. (Leonardo Valeri
Manera, closes #2619 )
2018-02-06 22:02:43 +01:00
511ffdd65d
patch 8.0.1473: MS-Windows: D&D fails between 32 and 64 bit apps
...
Problem: MS-Windows: D&D fails between 32 and 64 bit apps.
Solution: Add the /HIGHENTROPYVA:NO linker option. (Ken Takata, closes #2504 )
2018-02-04 19:37:40 +01:00
5d4247402b
patch 8.0.1472: MS-Windows: nsis installer is a bit slow
...
Problem: MS-Windows: nsis installer is a bit slow.
Solution: Use ReserveFile for vimrc.ini. (closes #2522 )
2018-02-04 19:11:30 +01:00
28944fecff
patch 8.0.1471: on MS-Windows CursorIM highlighting no longer works
...
Problem: On MS-Windows CursorIM highlighting no longer works.
Solution: Adjust #if statements. (Ken Takata)
2018-02-04 19:01:31 +01:00
2c7b906afb
patch 8.0.1470: integer overflow when using regexp pattern
...
Problem: Integer overflow when using regexp pattern. (geeknik)
Solution: Use a long instead of int. (Christian Brabandt, closes #2251 )
2018-02-04 18:22:46 +01:00
2374faae11
patch 8.0.1469: when package path is a symlink 'runtimepath' is wrong
...
Problem: When package path is a symlink adding it to 'runtimepath' happens
at the end.
Solution: Do not resolve symlinks before locating the position in
'runtimepath'. (Ozaki Kiichi, closes #2604 )
2018-02-04 17:47:42 +01:00
191f18bad0
patch 8.0.1468: illegal memory access in del_bytes()
...
Problem: Illegal memory access in del_bytes().
Solution: Check for negative byte count. (Christian Brabandt, closes #2466 )
2018-02-04 16:38:47 +01:00
fef4ddd5eb
patch 8.0.1467: libvterm doesn't handle illegal byte sequence correctly
...
Problem: Libvterm doesn't handle illegal byte sequence correctly.
Solution: After the invalid code check if there is space to store another
character. Allocate one more character. (zhykzhykzhyk, closes
#2614 , closes #2613 )
2018-02-04 14:49:57 +01:00
06b77ef69f
patch 8.0.1466: older GTK versions don't have gtk_entry_get_text_length()
...
Problem: Older GTK versions don't have gtk_entry_get_text_length().
Solution: Add a function with #ifdefs to take care of GTK version
differences. (Kazunobu Kuriyama, closes #2605 )
2018-02-04 14:32:57 +01:00
4bc0bed536
patch 8.0.1465: python2 and python3 detection not tested
...
Problem: Python2 and python3 detection not tested. (Matej Cepl)
Solution: Add test for detecting python2 and python3. Also detect a script
using "js" as javascript.
2018-02-03 22:35:40 +01:00
8a37b03289
patch 8.0.1464: completing directory after :find does not add slash
...
Problem: Completing directory after :find does not add slash.
Solution: Adjust the flags for globpath(). (Genki Sky)
2018-02-03 20:43:08 +01:00
ec48a9c589
patch 8.0.1463: test fails without 'autochdir' option
...
Problem: Test fails without 'autochdir' option.
Solution: Skip test if 'autochdir' is not supported.
2018-02-03 20:11:40 +01:00
f4aba797cb
patch 8.0.1462: missing yet another file in patch
...
Problem: Missing yet another file in patch.
Solution: Add changes to missing file.
2018-02-03 19:17:36 +01:00
15833239a4
patch 8.0.1461: missing another file in patch
...
Problem: Missing another file in patch.
Solution: Add changes to missing file.
2018-02-03 18:33:17 +01:00
b5cb65ba2b
patch 8.0.1460: missing file in patch
...
Problem: Missing file in patch.
Solution: Add changes to missing file.
2018-02-03 18:01:37 +01:00
b7407d3fc9
patch 8.0.1459: cannot handle change of directory
...
Problem: Cannot handle change of directory.
Solution: Add the DirChanged autocommand event. (Andy Massimino,
closes #888 ) Avoid changing directory for 'autochdir' too often.
2018-02-03 17:36:27 +01:00
ddb349369d
patch 8.0.1458: filetype detection test does not check all scripts
...
Problem: Filetype detection test does not check all scripts.
Solution: Add most scripts to the test
2018-02-03 15:55:49 +01:00
8fd2ffc530
patch 8.0.1457: clojure now supports a shebang line
...
Problem: Clojure now supports a shebang line.
Solution: Detect clojure script from the shebang line. (David Burgin,
closes #2570 )
2018-02-03 15:43:15 +01:00
8dce6c54c8
patch 8.0.1456: timer test on travis Mac is still flaky
...
Problem: Timer test on travis Mac is still flaky.
Solution: Increase time range a bit more.
2018-02-03 15:38:42 +01:00
4bfa8af141
patch 8.0.1455: if $SHELL contains a space then 'shell' is incorrect
...
Problem: If $SHELL contains a space then the default value of 'shell' is
incorrect. (Matthew Horan)
Solution: Escape spaces in $SHELL. (Christian Brabandt, closes #459 )
2018-02-03 15:14:46 +01:00
42b23fad1d
patch 8.0.1454: when in silent mode too much output is buffered
...
Problem: When in silent mode too much output is buffered.
Solution: Use line buffering instead of fully buffered. (Brian M. Carlson,
closes #2537 )
2018-02-03 14:46:45 +01:00
218101442e
patch 8.0.1453: terminal test fails on some slow terminals
...
Problem: Terminal test fails on some slow terminals.
Solution: Increase timeout to 10 seconds.
2018-02-02 18:30:36 +01:00
d4a282f7a5
patch 8.0.1452: terminal test fails on some systems
...
Problem: Terminal test fails on some systems. (jonathonf)
Solution: Use "cat" instead of Python to produce the input. Add a delay.
(closes #2607 )
2018-02-02 18:22:31 +01:00
94073167e3
patch 8.0.1451: difficult to set the python home directories properly
...
Problem: It is difficult to set the python home directory properly for
Python 2.7 and 3.5 since both use $PYTHONHOME.
Solution: Add the 'pythonhome' and 'pythonthreehome' options. (Kazuki
Sakamoto, closes #1266 )
2018-01-31 21:49:05 +01:00
1dd45fb4f3
patch 8.0.1450: GUI: endless loop when stopping cursor blinking
...
Problem: Endless loop when gui_mch_stop_blink() is called while blink_state
is BLINK_OFF. (zdohnal)
Solution: Avoid calling gui_update_cursor() recursively.
2018-01-31 21:10:01 +01:00
a338adcf22
patch 8.0.1449: slow redrawing with DirectX
...
Problem: Slow redrawing with DirectX.
Solution: Avoid calling gui_mch_flush() unnecessarily, especially when
updating the cursor. (Ken Takata, closes #2560 )
2018-01-31 20:51:47 +01:00
37badc898b
patch 8.0.1448: segfault with exception inside :rubyfile command
...
Problem: Segmentation fault when Ruby throws an exception inside :rubyfile
command.
Solution: Use rb_protect() instead of rb_load_protect(). (ujihisa,
closes #2147 , greywolf, closes #2512 , #2511 )
2018-01-31 20:15:30 +01:00
cada78975e
patch 8.0.1447: still too many old style tests
...
Problem: Still too many old style tests.
Solution: Turn a few tests into new style. (Yegappan Lakshmanan,
closes #2509 )
2018-01-31 19:30:24 +01:00
6f361c9912
patch 8.0.1446: acessing freed memory after window command in auto command
...
Problem: Acessing freed memory after window command in auto command.
(gy741)
Solution: Adjust the pointer in the parent frame. (Christian Brabandt,
closes #2467 )
2018-01-31 19:06:50 +01:00
153b704e20
patch 8.0.1445: cannot act on edits in the command line
...
Problem: Cannot act on edits in the command line.
Solution: Add the CmdlineChanged autocommand event. (xtal8, closes #2603 ,
closes #2524 )
2018-01-31 15:48:32 +01:00
ec0557f08b
patch 8.0.1444: missing -D_FILE_OFFSET_BITS=64 may cause problems
...
Problem: Missing -D_FILE_OFFSET_BITS=64 may cause problems if a library is
compiled with it.
Solution: Include -D_FILE_OFFSET_BITS if some CFLAGS has it. (James McCoy,
closes #2600 )
2018-01-31 14:41:37 +01:00
059fd01021
patch 8.0.1443: compiler complains about uninitialized variable
...
Problem: Compiler complains about uninitialized variable. (Tony Mechelynck)
Solution: Assign a value to the variable.
2018-01-31 14:25:53 +01:00
a172b63ab8
patch 8.0.1442: using pointer before it is set
...
Problem: Using pointer before it is set.
Solution: Search in whole buffer instead of next token.
2018-01-30 22:52:06 +01:00
ce46d934af
patch 8.0.1441: using ":undo 0" leaves undo in wrong state
...
Problem: Using ":undo 0" leaves undo in wrong state.
Solution: Instead of searching for state 1 and go above, just use the start.
(Ozaki Kiichi, closes #2595 )
2018-01-30 22:46:06 +01:00
b50773c6df
patch 8.0.1440: terminal window: some vterm responses are delayed
...
Problem: Terminal window: some vterm responses are delayed.
Solution: After writing input. check if there is output to read. (Ozaki
Kiichi, closes #2594 )
2018-01-30 22:31:19 +01:00
1274d33493
patch 8.0.1439: if cscope fails a search Vim may hang
...
Problem: If cscope fails a search Vim may hang.
Solution: Bail out when a search error is encountered. (Safouane Baroudi,
closes #2598 )
2018-01-30 21:47:52 +01:00
0479e910c4
patch 8.0.1438: filetype detection test not updated for change
...
Problem: Filetype detection test not updated for change.
Solution: Update the test.
2018-01-29 09:17:32 +01:00
d6d304298a
patch 8.0.1437: pkg-config doesn't work with cross compiling
...
Problem: Pkg-config doesn't work with cross compiling.
Solution: Use AC_PATH_TOOL() instead of AC_PATH_PROG(). (James McCoy,
closes #2513 )
2018-01-28 22:48:55 +01:00
40962ec9c0
Update runtime files.
2018-01-28 22:47:25 +01:00
84b242c369
patch 8.0.1436: not enough information about what Python version may work
...
Problem: Not enough information about what Python version may work.
Solution: Add "python_compiled", "python3_compiled", "python_dynamic" and
"python3_dynamic" values for has().
2018-01-28 17:45:49 +01:00
501383236d
patch 8.0.1435: memory leak in test_arabic
...
Problem: Memory leak in test_arabic.
Solution: Free the from and to parts. (Christian Brabandt, closes #2569 )
2018-01-28 17:05:16 +01:00
d7823d5b7c
patch 8.0.1434: GTK: :promtfind does not put focus on text input
...
Problem: GTK: :promtfind does not put focus on text input. (Adam Novak)
Solution: When re-opening the dialog put focus on the text input. (Kazunobu
Kuriyama, closes #2563 )
2018-01-28 15:36:42 +01:00
95dbcbea6d
patch 8.0.1433: illegal memory access after undo
...
Problem: Illegal memory access after undo. (Dominique Pelle)
Solution: Avoid the column becomes negative. (Christian Brabandt,
closes #2533 )
2018-01-27 21:01:34 +01:00
2ec364e94d
patch 8.0.1432: after ":copen" can't get the window-ID of the quickfix window
...
Problem: After ":copen" can't get the window-ID of the quickfix window.
(FalacerSelene)
Solution: Make it work without a quickfix list. Add a test. (Yegappan
Lakshmanan, closes #2541 )
2018-01-27 11:52:13 +01:00
0cbcd949e1
patch 8.0.1431: MS-Windows: vimtutor fails if %TMP% has special chars
...
Problem: MS-Windows: vimtutor fails if %TMP% has special chars.
Solution: Add quotes. (Tamce, closes #2561 )
2018-01-26 22:22:55 +01:00
4aad53c369
patch 8.0.1430: crash when term_start() fails
...
Problem: Crash when term_start() fails.
Solution: Initialize winpty_err.
2018-01-26 21:11:03 +01:00
ede35bbbd0
patch 8.0.1429: crash when calling term_start() with empty argument
...
Problem: Crash when calling term_start() with empty argument.
Solution: Check for invalid argument. (Yasuhiro Matsomoto, closes #2503 )
Fix memory leak.
2018-01-26 20:05:18 +01:00
200ea8ffaa
patch 8.0.1428: compiler warning on 64 bit MS-Windows system
...
Problem: Compiler warning on 64 bit MS-Windows system.
Solution: Change type from "int" to "size_t". (Mike Williams)
2018-01-02 15:37:46 +01:00
de04654ddc
patch 8.0.1427: the :leftabove modifier doesn't work for :copen
...
Problem: The :leftabove modifier doesn't work for :copen.
Solution: Respect the split modifier. (Yegappan Lakshmanan, closes #2496 )
2017-12-26 13:53:11 +01:00
9e3dfc6501
patch 8.0.1426: "gf" and <cfile> don't accept ? and & in URL
...
Problem: "gf" and <cfile> don't accept ? and & in URL. (Dmitrii Tcyganok)
Solution: Check for a URL and allow for extra characters. (closes #2493 )
2017-12-25 14:29:18 +01:00
2095148277
patch 8.0.1425: execute() does not work in completion of user command
...
Problem: execute() does not work in completion of user command. (thinca)
Solution: Switch off redir_off and restore it. (Ozaki Kiichi, closes #2492 )
2017-12-25 13:44:43 +01:00
df980db69b
update a few runtime files
2017-12-24 13:22:00 +01:00
a47ebdbd22
patch 8.0.1424: the timer_pause test is flaky on Travis
...
Problem: The timer_pause test is flaky on Travis.
Solution: Accept a longer sleep time on Mac.
2017-12-23 18:41:35 +01:00
fabaf753e2
patch 8.0.1423: error in return not caught by try/catch
...
Problem: Error in return not caught by try/catch.
Solution: Call update_force_abort(). (Yasuhiro Matsomoto, closes #2483 )
2017-12-23 17:26:11 +01:00
45a0000d5c
patch 8.0.1422: no fallback to underline when undercurl is not set
...
Problem: No fallback to underline when undercurl is not set. (Ben Jackson)
Solution: Check for the value to be empty instead of NULL. (closes #2424 )
2017-12-22 21:12:34 +01:00
e6640ad44e
patch 8.0.1421: accessing invalid memory with overlong byte sequence
...
Problem: Accessing invalid memory with overlong byte sequence.
Solution: Check for NUL character. (test by Dominique Pelle, closes #2485 )
2017-12-22 21:06:56 +01:00
3c09722600
patch 8.0.1420: accessing freed memory in vimgrep
...
Problem: Accessing freed memory in vimgrep.
Solution: Check that the quickfix list is still valid. (Yegappan Lakshmanan,
closes #2474 )
2017-12-21 20:54:49 +01:00
b73fa629d6
patch 8.0.1419: cursor column is not updated after ]s
...
Problem: Cursor column is not updated after ]s. (Gary Johnson)
Solution: Set the curswant flag.
2017-12-21 20:27:47 +01:00
ae6f865125
patch 8.0.1418: no test for expanding backticks
...
Problem: No test for expanding backticks.
Solution: Add a test. (Dominique Pelle, closes #2479 )
2017-12-20 22:32:20 +01:00
1bd999f982
patch 8.0.1417: test doesn't search for a sentence
...
Problem: Test doesn't search for a sentence. Still fails when searching for
start of sentence. (Dominique Pelle)
Solution: Add paren. Check for MAXCOL in dec().
2017-12-19 22:25:40 +01:00
8ada6aa929
patch 8.0.1416: crash when searching for a sentence
...
Problem: Crash when searching for a sentence.
Solution: Return NUL when getting character at MAXCOL. (closes #2468 )
2017-12-19 21:23:21 +01:00
4ce46c2a6b
patch 8.0.1415: warning for unused function without timers feature
...
Problem: Warning for unused function without timers feature.
Solution: Add #ifdef. (John Marriott)
2017-12-19 19:42:41 +01:00
14a4deb064
patch 8.0.1414: accessing freed memory in :lfile.
...
Problem: Accessing freed memory in :lfile.
Solution: Get the current window after executing autocommands. (Yegappan
Lakshmanan, closes #2473 )
2017-12-19 16:48:55 +01:00
aaf6e43b7a
patch 8.0.1413: accessing freed memory in :cbuffer
...
Problem: Accessing freed memory in :cbuffer.
Solution: Get quickfix list after executing autocmds. (closes #2470 )
2017-12-19 16:41:14 +01:00
1223744849
patch 8.0.1412: using free memory using setloclist()
...
Problem: Using free memory using setloclist(). (Dominique Pelle)
Solution: Mark location list context as still in use when needed. (Yegappan
Lakshmanan, closes #2462 )
2017-12-19 12:38:52 +01:00
2efb323e87
patch 8.0.1411: reading invalid memory with CTRL-W :
...
Problem: Reading invalid memory with CTRL-W :.
Solution: Correct the command characters. (closes #2469 )
2017-12-19 12:27:23 +01:00
338e47fdfd
patch 8.0.1410: hang when using count() with an empty string
...
Problem: Hang when using count() with an empty string.
Solution: Return zero for an empty string. (Dominique Pelle, closes #2465 )
2017-12-19 11:55:26 +01:00
132f75255e
patch 8.0.1409: buffer overflow in :tags command
...
Problem: Buffer overflow in :tags command.
Solution: Use vim_snprintf(). (Dominique Pelle, closes #2471 , closes #2475 )
Add a test.
2017-12-19 10:49:34 +01:00
a0ca7d002d
patch 8.0.1408: crash in setqflist()
...
Problem: Crash in setqflist().
Solution: Check for string to be NULL. (Dominique Pelle, closes #2464 )
2017-12-19 10:22:19 +01:00
4af031dbc8
patch 8.0.1407: GUI: CursorHold may trigger before 'updatetime'
...
Problem: GUI: CursorHold may trigger before 'updatetime' when using timers.
Solution: Check that 'updatetime' has passed.
2017-12-19 10:02:43 +01:00
b254af312d
patch 8.0.1406: difficult to track changes to a quickfix list
...
Problem: Difficult to track changes to a quickfix list.
Solution: Add a "changedtick" value. (Yegappan Lakshmanan, closes #2460 )
2017-12-18 19:48:58 +01:00
c9e649ae81
patch 8.0.1405: duplicated code for getting a typed character
...
Problem: Duplicated code for getting a typed character. CursorHold is
called too often in the GUI. (lilydjwg)
Solution: Refactor code to move code up from mch_inchar(). Don't fire
CursorHold if feedkeys() was used. (closes #2451 )
2017-12-18 18:14:47 +01:00
606d45ccd8
patch 8.0.1404: invalid memory access on exit
...
Problem: Invalid memory access on exit when autocommands wipe out a buffer.
(gy741, Dominique Pelle)
Solution: Check if the buffer is still valid. (closes #2449 )
2017-12-18 16:21:44 +01:00
4fb921e388
patch 8.0.1403: using freed buffer in grep command
...
Problem: Using freed buffer in grep command. (gy741, Dominique Pelle)
Solution: Lock the dummy buffer to avoid autocommands wiping it out.
2017-12-18 15:33:00 +01:00
9bca805ec4
patch 8.0.1402: crash with nasty autocommand
...
Problem: Crash with nasty autocommand. (gy741, Dominique Pelle)
Solution: Check that the new current buffer isn't wiped out. (closes #2447 )
2017-12-18 12:37:55 +01:00
cb89c98c26
patch 8.0.1401: cannot build with GTK but without XIM
...
Problem: Cannot build with GTK but without XIM. (Guido)
Solution: Adjust #ifdef. (closes #2461 )
2017-12-17 21:54:55 +01:00
f0b03c4e98
Update runtime files
2017-12-17 17:17:07 +01:00
8ee2d36e21
patch 8.0.1400: color scheme check script shows up as color scheme
...
Problem: Color scheme check script shows up as color scheme.
Solution: Move it to the "tools" subdirectory. (closes #2457 )
2017-12-17 16:11:09 +01:00
ee219b0e9f
patch 8.0.1399: warnings and errors when building tiny version
...
Problem: Warnings and errors when building tiny version. (Tony Mechelynck)
Solution: Add #ifdefs.
2017-12-17 14:55:01 +01:00
9e1d399e63
patch 8.0.1398: :packadd does not load packages from the "start" directory
...
Problem: :packadd does not load packages from the "start" directory.
(Alejandro Hernandez)
Solution: Make :packadd look in the "start" directory if those packages were
not loaded on startup.
2017-12-17 14:26:46 +01:00
890dd05492
patch 8.0.1397: pattern with \& following nothing gives an error
...
Problem: Pattern with \& following nothing gives an error.
Solution: Emit an empty node when needed.
2017-12-16 19:59:37 +01:00
a1d5c154db
patch 8.0.1396: memory leak when CTRL-G in search command line fails
...
Problem: Memory leak when CTRL-G in search command line fails.
Solution: Move restore_last_search_pattern to after "if".
2017-12-16 19:05:22 +01:00
200d0e36bc
patch 8.0.1395: it is not easy to see if a colorscheme is well written
...
Problem: It is not easy to see if a colorscheme is well written.
Solution: Add a script that checks for common mistakes. (Christian Brabandt)
2017-12-16 18:53:35 +01:00
7e1652c63c
patch 8.0.1394: cannot intercept a yank command
...
Problem: Cannot intercept a yank command.
Solution: Add the TextYankPost autocommand event. (Philippe Vaucher et al.,
closes #2333 )
2017-12-16 18:27:02 +01:00
6621605eb9
patch 8.0.1393: too much highlighting with 'hlsearch' and 'incsearch' set
...
Problem: Too much highlighting with 'hlsearch' and 'incsearch' set.
Solution: Do not highlight matches when the pattern matches everything.
2017-12-16 16:33:44 +01:00
8b42328cef
patch 8.0.1392: build fails with --with-features=huge --disable-channel
...
Problem: Build fails with --with-features=huge --disable-channel.
Solution: Don't enable the terminal feature when the channel feature is
missing. (Dominique Pelle, closes #2453 )
2017-12-16 14:37:06 +01:00
b29d328eb4
patch 8.0.1391: encoding empty string to JSON sometimes gives "null"
...
Problem: Encoding empty string to JSON sometimes gives "null".
Solution: Handle NULL string as empty string. (closes #2446 )
2017-12-15 21:25:01 +01:00
4697399e8c
move netrw back to the previous version
2017-12-14 19:56:46 +01:00
7f88b65f6c
patch 8.0.1390: DirectX scrolling can be slow, vertical positioning is off
...
Problem: DirectX scrolling can be slow, vertical positioning is off.
Solution: Make scroll slightly faster when using "scrlines:1". Fix y
position of displayed text. Fix DirectX with non-utf8 encoding.
(Ken Takata, closes #2440 )
2017-12-14 13:15:19 +01:00
a6d4849c71
patch 8.0.1389: getqflist() items are missing if not set
...
Problem: getqflist() items are missing if not set, that makes it more
difficult to handle the values.
Solution: When a value is not available return zero or another invalid
value. (Yegappan Lakshmanan, closes #2430 )
2017-12-12 22:45:31 +01:00
fae8ed1fc8
patch 8.0.1388: char not overwritten with ambiguous width char
...
Problem: Char not overwritten with ambiguous width char, if the ambiguous
char is single width but we reserve double-width space.
Solution: First clear the screen cells. (Ozaki Kiichi, closes #2436 )
2017-12-12 22:29:30 +01:00
a703aaee4d
patch 8.0.1387: wordcount test is old style
...
Problem: Wordcount test is old style.
Solution: Change into a new style test. (Yegappan Lakshmanan, closes #2434 )
2017-12-11 22:55:26 +01:00
8e6a31df81
patch 8.0.1386: cannot select modified buffers with getbufinfo()
...
Problem: Cannot select modified buffers with getbufinfo().
Solution: Add the "bufmodified" flag. (Yegappan Lakshmanan, closes #2431 )
2017-12-10 21:06:22 +01:00
59eb016dff
patch 8.0.1385: Python 3.5 is getting old
...
Problem: Python 3.5 is getting old.
Solution: Make Python 3.6 the default. (Ken Takata, closes #2429 )
2017-12-10 18:17:44 +01:00
74240d3feb
patch 8.0.1384: not enough quickfix help; confusing winid
...
Problem: Not enough quickfix help; confusing winid.
Solution: Add more examples in the help. When the quickfix window is not
present, return zero for getqflist() with 'winid'. Add more tests
for jumping to quickfix list entries. (Yegappan Lakshmanan, closes
#2427 )
2017-12-10 15:26:15 +01:00
35c5e8155d
patch 8.0.1383: local additions in help skips some files
...
Problem: Local additions in help skips some files. (joshklod)
Solution: Check the base file name length equals.
2017-12-09 21:10:13 +01:00
f405c8fe85
patch 8.0.1382: get "no write since last change" message if terminal is open
...
Problem: Get "no write since last change" message if a terminal is open.
(Fritz mehner)
Solution: Don't consider a buffer changed if it's a terminal window.
2017-12-09 19:51:49 +01:00
620ca2da37
patch 8.0.1381: ch_readraw() waits for NL if channel mode is NL
...
Problem: ch_readraw() waits for NL if channel mode is NL.
Solution: Pass a "raw" flag to channel_read_block(). (Yasuhiro Matsumoto)
2017-12-09 19:13:13 +01:00
05684310a5
patch 8.0.1380: using "vim -r swapfile" the hit-enter prompt is misplaced.
...
Problem: When recovering a file with "vim -r swapfile" the hit-enter prompt
is at the top of the window.
Solution: Invalidate the cursor position.
2017-12-09 15:11:24 +01:00
e4b78e2a42
patch 8.0.1379: configure check for selinux does not check for header file
...
Problem: Configure check for selinux does not check for header file.
Solution: Add an AC_CHECK_HEADER(). (Benny Siegert)
2017-12-07 22:29:11 +01:00
3388d33457
patch 8.0.1378: autoload script sources itself when defining function
...
Problem: Autoload script sources itself when defining function.
Solution: Pass TFN_NO_AUTOLOAD to trans_function_name(). (Yasuhiro
Matsumoto, closes #2423 )
2017-12-07 22:23:04 +01:00
6e65d594aa
patch 8.0.1377: cannot call a dict function in autoloaded dict
...
Problem: Cannot call a dict function in autoloaded dict.
Solution: Call get_lval() passing the read-only flag.
2017-12-07 22:11:27 +01:00
23c1b2b018
patch 8.0.1376: cursor in terminal not always updated
...
Problem: Cursor in terminal not always updated.
Solution: Call gui_mch_flush(). (Ken Takata)
2017-12-05 21:32:33 +01:00
415a6939a4
patch 8.0.1375: window size wrong after maximizing with WinBar
...
Problem: Window size wrong after maximizing with WinBar. (Lifepillar)
Solution: Fix height computations. Redraw window when it is zero height but
has a WinBar. (closes #2356 )
2017-12-05 20:31:07 +01:00
5fe6bdf858
patch 8.0.1374: CTRL-A does not work with an empty line
...
Problem: CTRL-A does not work with an empty line. (Alex)
Solution: Decrement the end only once. (Hirohito Higashi, closes #2387 )
2017-12-05 17:22:12 +01:00
3767c6e9ee
patch 8.0.1373: no error when settting 'renderoptions' before starting GUI
...
Problem: No error when settting 'renderoptions' to an invalid value before
starting the GUI.
Solution: Always check the value. (Ken Takata, closes #2413 )
2017-12-05 16:57:56 +01:00
ac112f01a6
patch 8.0.1372: profile log may be truncated halfway a character
...
Problem: Profile log may be truncated halfway a character.
Solution: Find the start of the character. (Ozaki Kiichi, closes #2385 )
2017-12-05 16:46:28 +01:00
feeb4d0901
patch 8.0.1371: Shift-Insert doesn't always work in MS-Windows console
...
Problem: Shift-Insert doesn't always work in MS-Windows console.
Solution: Handle K_NUL differently if the second character is more than one
byte. (Yasuhiro Matsumoto, closes #2381 )
2017-12-05 15:14:46 +01:00
1eca6f13d6
patch 8.0.1370: channel test for callback is flaky
...
Problem: Channel test for callback is flaky.
Solution: Add the test to thelist of flaky tests.
2017-12-05 14:04:27 +01:00
92467d3351
patch 8.0.1369: MS-Windows: drawing underline slow, mFallbackDC not updated
...
Problem: MS-Windows: drawing underline, curl and strike-throw is slow,
mFallbackDC not properly updated.
Solution: Several performance improvements. (Ken Takata, Taro Muraoka,
Yasuhiro Matsumoto, closes #2401 )
2017-12-05 13:22:16 +01:00
ce6179c799
patch 8.0.1368: cannot drag status or separator of new terminal window
...
Problem: Cannot drag status line or vertical separator of new terminal
window. (UncleBill)
Solution: Adjust mouse row and column computation. (Yasuhiro Matsumoto,
closes #2410 )
2017-12-05 13:06:16 +01:00
461fe50fea
patch 8.0.1367: terminal test hangs, executing abcde
...
Problem: terminal test hangs, executing abcde. (Stucki)
Solution: Rename abcde to abxde.
2017-12-05 12:30:03 +01:00
1ad022a9b8
patch 8.0.1367
2017-12-03 18:20:32 +01:00
24820691e6
patch 8.0.1365: when one channel test fails others fail as well
...
Problem: When one channel test fails others fail as well.
Solution: Stop the job after a failure. Also add a couple of tests to the
list of flaky tests.
2017-12-02 16:38:12 +01:00
22044dc317
patch 8.0.1364: there is no easy way to get the window position
...
Problem: There is no easy way to get the window position.
Solution: Add win_screenpos().
2017-12-02 15:43:37 +01:00
af903e5d49
patch 8.0.1363: recovering does not work when swap file ends in .stz
...
Problem: Recovering does not work when swap file ends in .stz.
Solution: Check for all possible swap file names. (Elfling, closes #2395 ,
closes #2396 )
2017-12-02 15:11:22 +01:00
a7c54cfcf8
patch 8.0.1362: terminal window colors wrong when using Terminal highlighting
...
Problem: Terminal window colors wrong when using Terminal highlighting.
Solution: Set ansi_index when setting the default color. Also cache the
color index for Terminal. (Ozaki Kiichi, closes #2393 )
2017-12-01 21:07:20 +01:00
97ce419201
patch 8.0.1361: some users don't want to diff with hidden buffers
...
Problem: Some users don't want to diff with hidden buffers.
Solution: Add the "hiddenoff" item to 'diffopt'. (Alisue, closes #2394 )
2017-12-01 20:35:58 +01:00
76bb7196f5
patch 8.0.1360: the Terminal highlighting doesn't work in a terminal
...
Problem: The Terminal highlighting doesn't work in a terminal. (Ozaki
Kiichi)
Solution: Use the Terminal highlighting when the cterm index is zero.
2017-11-30 22:07:07 +01:00
2f0584910c
Update runtime files
2017-11-30 20:27:52 +01:00
46359e198f
patch 8.0.1359: libvterm ANSI colors can not always be recognized
...
Problem: Libvterm ANSI colors can not always be recognized from the RGB
values. The default color is wrong when t_RB is empty.
Solution: Add the ANSI color index to VTermColor.
2017-11-29 22:33:38 +01:00
8b9e20afb0
patch 8.0.1358: undercurl is not used in the terminal
...
Problem: Undercurl is not used in the terminal. (Kovid Goyal)
Solution: Only fall back to underline when undercurl highlighting is not
defined. (closes #1306 )
2017-11-28 21:25:21 +01:00
1a2ab991a6
patch 8.0.1357: startup test fails on OpenBSD
...
Problem: Startup test fails on OpenBSD. (Edd Barrett)
Solution: Check for "BSD" instead of "FreeBSD" being defined. (James McCoy,
closes #2376 , closes #2378 )
2017-11-28 21:06:18 +01:00
c5aa55db7e
patch 8.0.1356: using simalt in a GUIEnter autocommand inserts characters
...
Problem: Using simalt in a GUIEnter autocommand inserts strange characters.
(Chih-Long Chang)
Solution: Ignore K_NOP in Insert mode. (closes #2379 )
2017-11-28 20:47:40 +01:00
a45ff6caba
patch 8.0.1355: cursor keys don't work in MS-Windows console
...
Problem: Cursor keys don't work in MS-Windows console.
Solution: Revert the previous patch. Also delete dead code.
2017-11-28 20:06:10 +01:00
3660a10c73
patch 8.0.1354: Shift-Insert doesn't always work in MS-Windows console
...
Problem: Shift-Insert doesn't always work in MS-Windows console.
Solution: Handle K_NUL differently. (Yasuhiro Matsumoto, closes #2381 )
2017-11-28 18:07:59 +01:00
1ed2276fd5
patch 8.0.1353: QuickFixCmdPost is not used consistently
...
Problem: QuickFixCmdPost is not used consistently.
Solution: Invoke QuickFixCmdPost consistently after QuickFixCmdPre.
(Yegappan Lakshmanan, closes #2377 )
2017-11-28 18:03:44 +01:00
f38c86eb6b
patch 8.0.1352: dead URLs in the help go unnoticed
...
Problem: Dead URLs in the help go unnoticed.
Solution: Add a script to check URLs in the help files. (Christian Brabandt)
2017-11-28 14:19:07 +01:00
bdb8139098
patch 8.0.1351: warning for unused variables building with MinGW
...
Problem: Warning for unused variables building with MinGW.
Solution: Change a few #ifdefs (suggested by John Marriott). Remove
superfluous checks of FEAT_MBYTE.
2017-11-27 23:24:08 +01:00
1355aad2b9
patch 8.0.1350: cannot build with +eval and -multi_byte
...
Problem: Cannot build with +eval and -multi_byte.
Solution: Adjust #ifdefs. (John Marriott) Always include the multi_byte
feature when an input method feature is enabled.
2017-11-27 22:49:01 +01:00
17471e84a7
patch 8.0.1349: options test fails when using Motif or GTK GUI
...
Problem: Options test fails when using Motif or GTK GUI.
Solution: Use "fixed" instead of "fixedsys" for Unix. Don't try "xxx" for
guifonteset. Don't set 'termencoding' to anything but "utf-8" for
GTK. Give an error if 'termencoding' can't be converted.
2017-11-26 23:47:18 +01:00
c8c75796a6
patch 8.0.1348: make testclean deletes script file on MS-Windows
...
Problem: Make testclean deletes script file on MS-Windows.
Solution: Rename file to avoid it starting with an "x".
2017-11-26 17:18:06 +01:00
e0aa23f7e3
patch 8.0.1347: MS-Windows: build broken by misplaced curly
...
Problem: MS-Windows: build broken by misplaced curly.
Solution: Move curly after #endif
2017-11-26 17:08:03 +01:00
a3571ebef5
patch 8.0.1346: crash when passing 50 char string to balloon_split()
...
Problem: Crash when passing 50 char string to balloon_split().
Solution: Fix off-by-one error.
2017-11-26 16:53:16 +01:00
c41838aa01
patch 8.0.1345: race condition between stat() and open() for viminfo
...
Problem: Race condition between stat() and open() for the viminfo temp
file. (Simon Ruderich)
Solution: use open() with O_EXCL to atomically check if the file exists.
Don't try using a temp file, renaming it will fail anyway.
2017-11-26 16:50:41 +01:00
2877d334ad
patch 8.0.1344: using 'imactivatefunc' in the GUI does not work
...
Problem: Using 'imactivatefunc' in the GUI does not work.
Solution: Do not use 'imactivatefunc' and 'imstatusfunc' in the GUI.
2017-11-26 14:56:16 +01:00
d7ccc4d81d
patch 8.0.1343: MS-Windows: does not show colored emojis
...
Problem: MS-Windows: does not show colored emojis.
Solution: Implement colored emojis. Improve drawing speed. Make 'taamode'
work. (Taro Muraoka, Yasuhiro Matsumoto, Ken Takata, close #2375 )
2017-11-26 14:29:32 +01:00
fb1db0e355
patch 8.0.1342: cannot build with Motif and multi-byte
...
Problem: Cannot build with Motif and multi-byte. (Mohamed Boughaba)
Solution: Use the right input method status flag. (closes #2374 )
2017-11-25 21:07:46 +01:00
be5d998d0e
patch 8.0.1341: 'imactivatefunc' test fails on MS-Windows
...
Problem: 'imactivatefunc' test fails on MS-Windows.
Solution: Skip the text.
2017-11-25 17:58:28 +01:00
281c93e714
patch 8.0.1340: MS-Windows: cannot build GUI without IME
...
Problem: MS-Windows: cannot build GUI without IME.
Solution: Define im_get_status() and im_set_active() when IME is not used.
2017-11-25 17:48:33 +01:00
83799a7b74
patch 8.0.1339: no test for what 8.0.1335 fixes
...
Problem: No test for what 8.0.1335 fixes.
Solution: Add a test. (Yasuhiro Matsumoto, closes #2373 )
2017-11-25 17:24:09 +01:00
819edbe078
patch 8.0.1338: USE_IM_CONTROL is confusing and incomplete
...
Problem: USE_IM_CONTROL is confusing and incomplete.
Solution: Just use FEAT_MBYTE. Call 'imactivatefunc' also without GUI.
2017-11-25 17:14:33 +01:00
50d43153a7
patch 8.0.1337: typo in #ifdef
...
Problem: Typo in #ifdef.
Solution: Fix the #if line.
2017-11-25 15:24:56 +01:00
6315a9ae92
patch 8.0.1336: cannot use imactivatefunc() unless compiled with +xim
...
Problem: Cannot use imactivatefunc() unless compiled with +xim.
Solution: Allow using imactivatefunc() when not compiled with +xim.
(Yasuhiro Matsumoto, closes #2349 )
2017-11-25 15:20:02 +01:00
291a9d15ed
patch 8.0.1335: writefile() using fsync() may give an error.
...
Problem: Writefile() using fsync() may give an error for a device.
(Yasuhiro Matsumoto)
Solution: Ignore fsync() failing. (closes #2373 )
2017-11-25 14:37:11 +01:00
3167c3e701
patch 8.0.1334: splitting a window with a WinBar damages window layout
...
Problem: Splitting a window with a WinBar damages window layout.
(Lifepillar)
Solution: Take the winbar into account when computing the new window
position. Add WINBAR_HEIGHT().
2017-11-25 14:19:43 +01:00
2c997d7603
patch 8.0.1333: some tests are run twice
...
Problem: Some tests are run twice.
Solution: Invoked most utf8 tests only from test_alot_utf8. (Yegappan
Lakshmanan, closes #2369 )
2017-11-23 22:52:09 +01:00
93a32e2ec4
patch 8.0.1332: highlighting in quickfix window could be better
...
Problem: Highlighting in quickfix window could be better. (Axel Bender)
Solution: Use the qfSeparator highlight item. (Yegappan Lakshmanan)
2017-11-23 22:05:45 +01:00
3679c17917
patch 8.0.1331: possible crash when window can be zero lines high
...
Problem: Possible crash when window can be zero lines high. (Joseph
Dornisch)
Solution: Only set w_fraction if the window is at least two lines high.
2017-11-22 22:22:11 +01:00
a2a80162de
Update runtime files.
2017-11-21 23:09:50 +01:00
52dbb5ea7f
patch 8.0.1330: MS-Windows: job in terminal can't get back to Vim
...
Problem: MS-Windows: job in terminal can't get back to Vim.
Solution: set VIM_SERVERNAME in the environment. (Yasuhiro Matsumoto, closes
#2360 )
2017-11-21 18:11:27 +01:00
5505860152
patch 8.0.1329: when a flaky test fails it also often fails the second time
...
Problem: When a flaky test fails it also often fails the second time.
Solution: Sleep a couple of seconds before the second try.
2017-11-21 15:14:51 +01:00
ff5467965e
patch 8.0.1328: trouble when using ":term ++close" with autocmd
...
Problem: Trouble when using ":term ++close" with autocmd. (Gabriel Barta)
Solution: Use aucmd_prepbuf() and aucmd_restbuf() instead of setting curbuf.
(closes #2339 )
2017-11-21 14:47:57 +01:00
91ffda9852
patch 8.0.1327: new proto file missing from distribution
...
Problem: New proto file missing from distribution.
Solution: Add it. (closes #2355 )
2017-11-21 13:52:14 +01:00
6e77df2d85
patch 8.0.1326: largefile test fails on CI, glob test on MS-Windows
...
Problem: Largefile test fails on CI, glob test on MS-Windows.
Solution: Remove largefile test from list of all tests. Don't run
Test_glob() on non-unix systems. More cleanup. (Yegappan
Lakshmanan, closes #2354 )
2017-11-21 11:43:08 +01:00
5df95ea9ef
patch 8.0.1325: more tests are not run
...
Problem: More tests are not run.
Solution: Add targets to the list of tests. (Yegappan Lakshmanan)
2017-11-20 22:08:10 +01:00
bb160a188a
patch 8.0.1324: some xterm sends different mouse move codes
...
Problem: Some xterm sends different mouse move codes.
Solution: Also accept 0x80 as a move event.
2017-11-20 21:52:24 +01:00
73675fbc48
patch 8.0.1323: mouse events in a terminal window may cause endless loop
...
Problem: Mouse events in a terminal window may cause endless loop.
Solution: Adjust position computation. Don't stuff a mouse event when
coming from normal_cmd().
2017-11-20 21:49:19 +01:00
5bbef31949
patch 8.0.1322: textformat test isn't run
...
Problem: Textformat test isn't run. (Yegappan Lakshmanan)
Solution: Add target to the list of tests.
2017-11-19 20:38:05 +01:00
40e280d949
patch 8.0.1321: can't build huge version with Athena
...
Problem: Can't build huge version with Athena. (Mark Kelly)
Solution: Move including beval.h to before structs.h. Include beval.pro like
other proto files.
2017-11-19 20:34:59 +01:00
