patch 8.2.3599: not all gdbinit files are recognized

Problem:    Not all gdbinit files are recognized.
Solution:   Add "gdbinit". (Doug Kearns)

.github/CODEOWNERS

@@ -51,6 +51,7 @@ runtime/compiler/sass.vim		@tpope
 runtime/compiler/se.vim			@dkearns
 runtime/compiler/shellcheck.vim		@dkearns
 runtime/compiler/sml.vim		@dkearns
+runtime/compiler/spectral.vim		@romainl
 runtime/compiler/stylelint.vim		@dkearns
 runtime/compiler/tcl.vim		@dkearns
 runtime/compiler/tidy.vim		@dkearns
@@ -59,6 +60,7 @@ runtime/compiler/tsc.vim		@dkearns
 runtime/compiler/typedoc.vim		@dkearns
 runtime/compiler/xmllint.vim		@dkearns
 runtime/compiler/xo.vim			@dkearns
+runtime/compiler/yamllint.vim		@romainl
 runtime/compiler/zsh.vim		@dkearns
 runtime/doc/pi_getscript.txt		@cecamp
 runtime/doc/pi_logipat.txt		@cecamp
@@ -71,6 +73,8 @@ runtime/ftplugin/awk.vim		@dkearns
 runtime/ftplugin/basic.vim		@dkearns
 runtime/ftplugin/bst.vim		@tpope
 runtime/ftplugin/cfg.vim		@chrisbra
+runtime/ftplugin/clojure.vim		@axvr
+runtime/ftplugin/csh.vim		@dkearns
 runtime/ftplugin/css.vim		@dkearns
 runtime/ftplugin/cucumber.vim		@tpope
 runtime/ftplugin/eiffel.vim		@dkearns
@@ -95,8 +99,10 @@ runtime/ftplugin/markdown.vim		@tpope
 runtime/ftplugin/matlab.vim		@cecamp
 runtime/ftplugin/meson.vim		@Liambeguin
 runtime/ftplugin/modula3.vim		@dkearns
+runtime/ftplugin/nginx.vim		@chr4
 runtime/ftplugin/nroff.vim		@a-vrma
 runtime/ftplugin/nsis.vim		@k-takata
+runtime/ftplugin/octave.vim		@dkearns
 runtime/ftplugin/pascal.vim		@dkearns
 runtime/ftplugin/pbtxt.vim		@lakshayg
 runtime/ftplugin/pdf.vim		@tpope
@@ -107,27 +113,50 @@ runtime/ftplugin/sass.vim		@tpope
 runtime/ftplugin/scss.vim		@tpope
 runtime/ftplugin/spec.vim		@ignatenkobrain
 runtime/ftplugin/systemverilog.vim	@Kocha
+runtime/ftplugin/tcsh.vim		@dkearns
 runtime/ftplugin/tidy.vim		@dkearns
 runtime/ftplugin/tmux.vim		@ericpruitt
+runtime/ftplugin/toml.vim		@averms
 runtime/ftplugin/typescript.vim		@dkearns
 runtime/ftplugin/typescriptreact.vim	@dkearns
 runtime/ftplugin/xml.vim		@chrisbra
 runtime/ftplugin/zsh.vim		@chrisbra
 runtime/indent/bst.vim			@tpope
+runtime/indent/cdl.vim			@dkearns
+runtime/indent/clojure.vim		@axvr
+runtime/indent/config.vim		@dkearns
+runtime/indent/css.vim			@dkearns
 runtime/indent/cucumber.vim		@tpope
+runtime/indent/d.vim			@dkearns
 runtime/indent/dosbatch.vim		@k-takata
+runtime/indent/dtd.vim			@dkearns
+runtime/indent/dylan.vim		@dkearns
+runtime/indent/elm.vim			@andys8
 runtime/indent/eruby.vim		@tpope @dkearns
+runtime/indent/eterm.vim		@dkearns
+runtime/indent/framescript.vim		@dkearns
 runtime/indent/gitconfig.vim		@tpope
 runtime/indent/haml.vim			@tpope
+runtime/indent/idlang.vim		@dkearns
+runtime/indent/ld.vim			@dkearns
 runtime/indent/liquid.vim		@tpope
+runtime/indent/make.vim			@dkearns
 runtime/indent/meson.vim		@Liambeguin
+runtime/indent/mma.vim			@dkearns
+runtime/indent/nginx.vim		@chr4
 runtime/indent/nsis.vim			@k-takata
+runtime/indent/occam.vim		@dkearns
+runtime/indent/postscr.vim		@dkearns
+runtime/indent/prolog.vim		@dkearns
 runtime/indent/ps1.vim			@heaths
+runtime/indent/readline.vim		@dkearns
 runtime/indent/ruby.vim			@AndrewRadev @dkearns
 runtime/indent/sass.vim			@tpope
 runtime/indent/scss.vim			@tpope
 runtime/indent/sh.vim			@chrisbra
 runtime/indent/systemverilog.vim	@Kocha
+runtime/indent/tcl.vim			@dkearns
+runtime/indent/tcsh.vim			@dkearns
 runtime/indent/teraterm.vim		@k-takata
 runtime/indent/xml.vim			@chrisbra
 runtime/indent/zsh.vim			@chrisbra
@@ -142,6 +171,7 @@ runtime/plugin/vimballPlugin.vim	@cecamp
 runtime/plugin/zipPlugin.vim		@cecamp
 runtime/syntax/aidl.vim			@dpelle
 runtime/syntax/amiga.vim		@cecamp
+runtime/syntax/arduino.vim		@johshoff
 runtime/syntax/asm.vim			@dkearns
 runtime/syntax/asmh8300.vim		@dkearns
 runtime/syntax/asterisk.vim		@jaunis
@@ -151,6 +181,7 @@ runtime/syntax/bst.vim			@tpope
 runtime/syntax/cabal.vim		@coot
 runtime/syntax/cabalconfig.vim		@coot
 runtime/syntax/cabalproject.vim		@coot
+runtime/syntax/clojure.vim		@axvr
 runtime/syntax/cs.vim			@nickspoons
 runtime/syntax/csh.vim			@cecamp
 runtime/syntax/cucumber.vim		@tpope
@@ -189,6 +220,7 @@ runtime/syntax/markdown.vim		@tpope
 runtime/syntax/meson.vim		@Liambeguin
 runtime/syntax/modula3.vim		@dkearns
 runtime/syntax/netrw.vim		@cecamp
+runtime/syntax/nginx.vim		@chr4
 runtime/syntax/nroff.vim		@jmarshall
 runtime/syntax/nsis.vim			@k-takata
 runtime/syntax/pascal.vim		@dkearns
@@ -214,10 +246,12 @@ runtime/syntax/sshdconfig.vim		@Jakuje
 runtime/syntax/sudoers.vim		@e-kwsm
 runtime/syntax/systemverilog.vim	@Kocha
 runtime/syntax/tags.vim			@cecamp
+runtime/syntax/tcsh.vim			@dkearns
 runtime/syntax/teraterm.vim		@k-takata
 runtime/syntax/tex.vim			@cecamp
 runtime/syntax/tidy.vim			@dkearns
 runtime/syntax/tmux.vim			@ericpruitt
+runtime/syntax/toml.vim			@averms
 runtime/syntax/vim.vim			@cecamp
 runtime/syntax/wget.vim			@dkearns
 runtime/syntax/xbl.vim			@dkearns

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,34 +0,0 @@
----
-name: Bug report
-about: Create a report to help us improve Vim
-title: ''
-labels: ''
-
----
-
-_Instructions: Replace the template text and remove irrelevant text (including this line)_
-
-**Describe the bug**
-A clear and concise description of what the bug is.
-(Issues related to the runtime files should be reported to their maintainer, check the file header.)
-
-**To Reproduce**
-Detailed steps to reproduce the behavior:
-1. Run `vim --clean` (or `gvim --clean`, etc.)
-2. Edit `filename`
-3. Type '....'
-4. Describe the error
-
-**Expected behavior**
-A clear and concise description of what you expected to happen.
-
-**Screenshots**
-If applicable, copy/paste the text or add screenshots to help explain your problem.
-
-**Environment (please complete the following information):**
- - Vim version [e.g. 8.1.1234] (Or paste the result of `vim --version`.)
- - OS: [e.g. Ubuntu 18.04, Windows 10 1809, macOS 10.14]
- - Terminal: [e.g. GNOME Terminal, mintty, iTerm2, tmux, GNU screen] (Use GUI if you use the GUI.)
-
-**Additional context**
-Add any other context about the problem here.

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,47 @@
+---
+name: Bug report
+description: Create a report to help us improve Vim.
+labels: [bug]
+
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for reporting issues of Vim!
+        
+        To make it easier for us to help you please enter detailed information below.
+  - type: textarea
+    attributes:
+      label: Steps to reproduce
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Expected behaviour
+      placeholder: A clear and concise description of what you expected to happen.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Operating system
+      description: >
+        Your operating system name, version and desktop environment.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Version of Vim
+      description: >
+        The name of your development environment, version. [e.g. GNOME Terminal (v0.0.0000)]
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Logs and stack traces
+      placeholder: Insert log or other text here (if necessary)
+      render: shell

.github/workflows/ci.yml

@@ -40,6 +40,7 @@ jobs:
             compiler: gcc
             coverage: true
             extra: testgui
+            uchar: true
           - features: huge
             compiler: clang
             extra: asan
@@ -80,7 +81,7 @@ jobs:
           wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add -
           . /etc/lsb-release
           sudo add-apt-repository -y "deb http://apt.llvm.org/${DISTRIB_CODENAME}/ llvm-toolchain-${DISTRIB_CODENAME}-11 main"
-          sudo apt-get install -y clang-11
+          sudo apt-get install -y clang-11 llvm-11
           sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-11 100
           sudo update-alternatives --set clang /usr/bin/clang-11
           sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-11 100
@@ -111,10 +112,14 @@ jobs:
             ;;
           esac
 
+          CFLAGS=""
           if ${{ matrix.coverage == true }}; then
-            echo "CFLAGS=--coverage -DUSE_GCOV_FLUSH"
+            CFLAGS="$CFLAGS --coverage -DUSE_GCOV_FLUSH"
             echo "LDFLAGS=--coverage"
           fi
+          if ${{ matrix.uchar == true }}; then
+            CFLAGS="$CFLAGS -funsigned-char"
+          fi
           if ${{ contains(matrix.extra, 'testgui') }}; then
             echo "TEST=-C src testgui"
           fi
@@ -130,6 +135,7 @@ jobs:
           if ${{ contains(matrix.extra, 'vimtags') }}; then
             echo "TEST=-C runtime/doc vimtags VIMEXE=../../${SRCDIR}/vim"
           fi
+          echo "CFLAGS=$CFLAGS"
           ) >> $GITHUB_ENV
 
       - name: Set up system
@@ -201,18 +207,18 @@ jobs:
           do_test() { sg audio "sg $(id -gn) '$*'"; }
           do_test make ${SHADOWOPT} ${TEST}
 
-      - name: Coveralls
-        if: matrix.coverage && success() && github.event_name != 'pull_request'
-        env:
-          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
-          COVERALLS_PARALLEL: true
-          TRAVIS_JOB_ID: ${{ github.run_id }}
-        run: |
-          sudo apt-get install -y python3-setuptools python3-wheel
-          sudo -H pip3 install pip -U
-          # needed for https support for coveralls building cffi only works with gcc, not with clang
-          CC=gcc pip3 install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
-          ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8
+      #      - name: Coveralls
+      #        if: matrix.coverage && success() && github.event_name != 'pull_request'
+      #        env:
+      #          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
+      #          COVERALLS_PARALLEL: true
+      #          TRAVIS_JOB_ID: ${{ github.run_id }}
+      #        run: |
+      #          sudo apt-get install -y python3-setuptools python3-wheel
+      #          sudo -H pip3 install pip -U
+      #          # needed for https support for coveralls building cffi only works with gcc, not with clang
+      #          CC=gcc pip3 install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
+      #          ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8
 
       - name: Codecov
         if: matrix.coverage && success()
@@ -228,18 +234,18 @@ jobs:
             false # in order to fail a job
           done
 
-  coveralls:
-    runs-on: ubuntu-18.04
-
-    needs: linux
-    if: always() && github.event_name != 'pull_request'
-
-    steps:
-      - name: Parallel finished
-        env:
-          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
-        run: |
-          curl -k "https://coveralls.io/webhook?repo_token=${COVERALLS_REPO_TOKEN}" -d "payload[build_num]=${GITHUB_RUN_ID}&payload[status]=done"
+  #  coveralls:
+  #    runs-on: ubuntu-18.04
+  #
+  #    needs: linux
+  #    if: always() && github.event_name != 'pull_request'
+  #
+  #    steps:
+  #      - name: Parallel finished
+  #        env:
+  #          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
+  #        run: |
+  #          curl -k "https://coveralls.io/webhook?repo_token=${COVERALLS_REPO_TOKEN}" -d "payload[build_num]=${GITHUB_RUN_ID}&payload[status]=done"
 
   macos:
     runs-on: macos-latest
@@ -366,7 +372,7 @@ jobs:
             features: NORMAL
 
     steps:
-      - name: Initalize
+      - name: Initialize
         id: init
         shell: bash
         run: |

.github/workflows/codeql-analysis.yml

@@ -38,7 +38,7 @@ jobs:
       with:
         languages: ${{ matrix.language }}
         # If you wish to specify custom queries, you can do so here or in a config file.
-        # By default, queries listed here will override any specified in a config file. 
+        # By default, queries listed here will override any specified in a config file.
         # Prefix the list here with "+" to use these queries and those in the config file.
         # queries: ./path/to/local/query, your-org/your-repo/queries@main
 

.github/workflows/coverity.yml

@@ -0,0 +1,80 @@
+name: Coverity
+on:
+  schedule:
+    - cron: '42 0 * * *'  # Run once per day, to avoid Coverity's submission limits
+  workflow_dispatch:
+
+jobs:
+  scan:
+    runs-on: ubuntu-18.04
+
+    env:
+      CC: gcc
+      DEBIAN_FRONTEND: noninteractive
+
+    steps:
+      - uses: actions/checkout@v2
+
+      - name: Download Coverity
+        run: |
+          wget -q https://scan.coverity.com/download/cxx/linux64 --post-data "token=$TOKEN&project=vim" -O coverity_tool.tgz
+          mkdir cov-scan
+          tar ax -f coverity_tool.tgz --strip-components=1 -C cov-scan
+        env:
+          TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
+
+      - name: Install packages
+        run: |
+          sudo apt update && sudo apt install -y \
+            autoconf \
+            gettext \
+            libcanberra-dev \
+            libperl-dev \
+            python-dev \
+            python3-dev \
+            liblua5.3-dev \
+            lua5.3 \
+            ruby-dev \
+            tcl-dev \
+            libgtk2.0-dev \
+            desktop-file-utils \
+            libtool-bin \
+            libsodium-dev
+
+      - name: Set up environment
+        run: |
+          echo "$(pwd)/cov-scan/bin" >> $GITHUB_PATH
+          (
+          echo "NPROC=$(getconf _NPROCESSORS_ONLN)"
+          echo "CONFOPT=--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp"
+          ) >> $GITHUB_ENV
+
+      - name: Set up system
+        run: |
+          # Setup lua5.3 manually since its package doesn't provide alternative.
+          # https://bugs.launchpad.net/ubuntu/+source/lua5.3/+bug/1707212
+          sudo update-alternatives --install /usr/bin/lua lua /usr/bin/lua5.3 10
+
+      - name: Configure
+        run: |
+          ./configure --with-features=huge ${CONFOPT} --enable-fail-if-missing
+          # Append various warning flags to CFLAGS.
+          sed -i -f ci/config.mk.sed src/auto/config.mk
+          sed -i -f ci/config.mk.${CC}.sed src/auto/config.mk
+
+      - name: Build/scan vim
+        run: |
+          cov-build --dir cov-int make -j${NPROC}
+
+      - name: Submit results
+        run: |
+          tar zcf cov-scan.tgz cov-int
+          curl --form token=$TOKEN \
+            --form email=$EMAIL \
+            --form file=@cov-scan.tgz \
+            --form version="$(git rev-parse HEAD)" \
+            --form description="Automatic GHA scan" \
+            'https://scan.coverity.com/builds?project=vim'
+        env:
+          TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
+          EMAIL: ${{ secrets.COVERITY_SCAN_EMAIL }}

CONTRIBUTING.md

@@ -57,7 +57,7 @@ If you find a problem with one of these files or have a suggestion for
 improvement, please first try to contact the maintainer directly.
 Look in the header of the file for the name and email address.
 
-The maintainer will take care of issues and send updates to Bram for 
+The maintainer will take care of issues and send updates to Bram for
 distribution with Vim.
 
 If the maintainer does not respond, contact the vim-dev maillist.

Filelist

@@ -9,6 +9,7 @@ SRC_ALL =	\
 		.github/CODEOWNERS \
 		.github/workflows/ci.yml \
 		.github/workflows/codeql-analysis.yml \
+		.github/workflows/coverity.yml \
 		.gitignore \
 		.hgignore \
 		.lgtm.yml \
@@ -23,6 +24,7 @@ SRC_ALL =	\
 		ci/setup-xvfb.sh \
 		src/Make_all.mak \
 		src/README.md \
+		src/alloc.c \
 		src/alloc.h \
 		src/arabic.c \
 		src/arglist.c \
@@ -210,6 +212,7 @@ SRC_ALL =	\
 		src/testdir/popupbounce.vim \
 		src/proto.h \
 		src/protodef.h \
+		src/proto/alloc.pro \
 		src/proto/arabic.pro \
 		src/proto/arglist.pro \
 		src/proto/autocmd.pro \
@@ -795,6 +798,7 @@ RT_SCRIPTS =	\
 		runtime/autoload/xml/*.vim \
 		runtime/colors/*.vim \
 		runtime/colors/README.txt \
+		runtime/colors/lists/*.vim \
 		runtime/colors/tools/*.vim \
 		runtime/compiler/*.vim \
 		runtime/compiler/README.txt \
@@ -847,7 +851,6 @@ RT_AMI_DOS =	\
 # DOS runtime (also in the extra archive)
 RT_DOS =	\
 		README_dos.txt \
-		runtime/rgb.txt \
 		vimtutor.bat \
 
 # DOS runtime without CR-LF translation (also in the extra archive)

README.md

@@ -46,7 +46,7 @@ This `README.md` file comes with the runtime archive.  It includes the
 documentation, syntax files and other files that are used at runtime.  To run
 Vim you must get either one of the binary archives or a source archive.
 Which one you need depends on the system you want to run it on and whether you
-want or must compile it yourself.  Check http://www.vim.org/download.php for
+want or must compile it yourself.  Check https://www.vim.org/download.php for
 an overview of currently available distributions.
 
 Some popular places to get the latest Vim:
@@ -86,7 +86,7 @@ The Vim tutor is a one hour training course for beginners.  Often it can be
 started as `vimtutor`.  See `:help tutor` for more information.
 
 The best is to use `:help` in Vim.  If you don't have an executable yet, read
-[`runtime/doc/help.txt`](/runtime/doc/help.txt). 
+[`runtime/doc/help.txt`](/runtime/doc/help.txt).
 It contains pointers to the other documentation files.
 The User Manual reads like a book and is recommended to learn to use
 Vim.  See `:help user-manual`.
@@ -117,7 +117,7 @@ in Uganda.  See [`runtime/doc/uganda.txt`](runtime/doc/uganda.txt).  But
 at the same time donations increase Bram's motivation to keep working on Vim!
 
 For the most recent information about sponsoring look on the Vim web site:
-	http://www.vim.org/sponsor/
+	https://www.vim.org/sponsor/
 
 
 ## Contributing ##
@@ -129,15 +129,15 @@ If you would like to help making Vim better, see the
 ## Information ##
 
 The latest news about Vim can be found on the Vim home page:
-	http://www.vim.org/
+	https://www.vim.org/
 
 If you have problems, have a look at the Vim documentation or tips:
-	http://www.vim.org/docs.php
-	http://vim.wikia.com/wiki/Vim_Tips_Wiki
+	https://www.vim.org/docs.php
+	https://vim.fandom.com/wiki/Vim_Tips_Wiki
 
 If you still have problems or any other questions, use one of the mailing
 lists to discuss them with Vim users and developers:
-	http://www.vim.org/maillist.php
+	https://www.vim.org/maillist.php
 
 If nothing else works, report bugs directly:
 	Bram Moolenaar <Bram@vim.org>

README.txt

@@ -33,7 +33,7 @@ This README.txt file comes with the runtime archive.  It includes the
 documentation, syntax files and other files that are used at runtime.  To run
 Vim you must get either one of the binary archives or a source archive.
 Which one you need depends on the system you want to run it on and whether you
-want or must compile it yourself.  Check "http://www.vim.org/download.php" for
+want or must compile it yourself.  Check "https://www.vim.org/download.php" for
 an overview of currently available distributions.
 
 Some popular places to get the latest Vim:
@@ -101,7 +101,7 @@ increase Bram's motivation to keep working on Vim!
 
 For the most recent information about sponsoring look on the Vim web site:
 
-	http://www.vim.org/sponsor/
+	https://www.vim.org/sponsor/
 
 
 CONTRIBUTING
@@ -112,15 +112,15 @@ If you would like to help making Vim better, see the CONTRIBUTING.md file.
 INFORMATION
 
 The latest news about Vim can be found on the Vim home page:
-	http://www.vim.org/
+	https://www.vim.org/
 
 If you have problems, have a look at the Vim documentation or tips:
-	http://www.vim.org/docs.php
-	http://vim.wikia.com/wiki/Vim_Tips_Wiki
+	https://www.vim.org/docs.php
+	https://vim.fandom.com/wiki/Vim_Tips_Wiki
 
 If you still have problems or any other questions, use one of the mailing
 lists to discuss them with Vim users and developers:
-	http://www.vim.org/maillist.php
+	https://www.vim.org/maillist.php
 
 If nothing else works, report bugs directly:
 	Bram Moolenaar <Bram@vim.org>

README_VIM9.md

@@ -45,14 +45,16 @@ full code is below):
 | Vim old | 5.018541 |
 | Python  | 0.369598 |
 | Lua     | 0.078817 |
+| LuaJit  | 0.004245 |
 | Vim new | 0.073595 |
 
 That looks very promising!  It's just one example, but it shows how much
 we can gain, and also that Vim script can be faster than builtin
 interfaces.
 
-In practice the script would not do something useless as counting but change
-the text.  For example, reindent all the lines:
+LuaJit is much faster at Lua-only instructions.  In practice the script would
+not do something useless as counting but change the text.  For example,
+reindent all the lines:
 
 ``` vim
   let totallen = 0
@@ -64,13 +66,17 @@ the text.  For example, reindent all the lines:
 
 | how     | time in sec |
 | --------| -------- |
-| Vim old | 0.853752 |
-| Python  | 0.304584 |
-| Lua     | 0.286573 |
-| Vim new | 0.190276 |
+| Vim old | 0.578598 |
+| Python  | 0.152040 |
+| Lua     | 0.164917 |
+| LuaJit  | 0.128400 |
+| Vim new | 0.079692 |
+
+[These times were measured on a different system by Dominique Pelle]
 
 The differences are smaller, but Vim 9 script is clearly the fastest.
-Using LuaJIT gives 0.25, only a little bit faster than plain Lua.
+Using LuaJIT is only a little bit faster than plain Lua here, clearly the call
+back to the Vim code is costly.
 
 How does Vim9 script work?  The function is first compiled into a sequence of
 instructions.  Each instruction has one or two parameters and a stack is
@@ -331,7 +337,7 @@ let start = reltime()
 echo Python()
 echo 'Python: ' .. reltimestr(reltime(start))
 bwipe!
- 
+
 new
 call setline(1, range(100000))
 let start = reltime()

READMEdir/README_extra.txt

@@ -26,7 +26,6 @@ src/os_win32.*		Files for the Win32 port.
 src/gui_w32.*		Files for the Win32 GUI.
 src/gui_w48.*		Files for the Win32 and Win16 GUI.
 src/Make_mvc.mak	MS Visual C++ makefile for the Win32 GUI.
-runtime/rgb.txt		File with color definitions for the Win32 GUI.
 
 src/if_ole.*		OLE automation interface, for MS Windows 95 and NT.
 

nsis/gvim.nsi

@@ -126,10 +126,11 @@ RequestExecutionLevel highest
 # This adds '\Vim' to the user choice automagically.  The actual value is
 # obtained below with CheckOldVim.
 !ifdef WIN64
-InstallDir "$PROGRAMFILES64\Vim"
+  !define DEFAULT_INSTDIR "$PROGRAMFILES64\Vim"
 !else
-InstallDir "$PROGRAMFILES\Vim"
+  !define DEFAULT_INSTDIR "$PROGRAMFILES\Vim"
 !endif
+InstallDir ${DEFAULT_INSTDIR}
 
 # Types of installs we can perform:
 InstType $(str_type_typical)
@@ -356,7 +357,6 @@ Section "$(str_section_exe)" id_section_exe
 	File ..\README.txt
 	File ..\uninstall.txt
 	File ${VIMRT}\*.vim
-	File ${VIMRT}\rgb.txt
 
 	File ${VIMTOOLS}\diff.exe
 	File ${VIMTOOLS}\winpty${BIT}.dll
@@ -366,6 +366,8 @@ Section "$(str_section_exe)" id_section_exe
 	File ${VIMRT}\colors\*.*
 	SetOutPath $0\colors\tools
 	File ${VIMRT}\colors\tools\*.*
+	SetOutPath $0\colors\lists
+	File ${VIMRT}\colors\lists\*.*
 
 	SetOutPath $0\compiler
 	File ${VIMRT}\compiler\*.*
@@ -710,8 +712,13 @@ Function .onInit
   !insertmacro MUI_LANGDLL_DISPLAY
 !endif
 
-  # Check $VIM
-  ReadEnvStr $INSTDIR "VIM"
+  ${If} $INSTDIR == ${DEFAULT_INSTDIR}
+    # Check $VIM
+    ReadEnvStr $3 "VIM"
+    ${If} $3 != ""
+      StrCpy $INSTDIR $3
+    ${EndIf}
+  ${EndIf}
 
   call CheckOldVim
   Pop $3
@@ -721,20 +728,11 @@ Function .onInit
     SectionSetInstTypes ${id_section_old_ver} 0
     SectionSetText ${id_section_old_ver} ""
   ${Else}
-    ${If} $INSTDIR == ""
+    ${If} $INSTDIR == ${DEFAULT_INSTDIR}
       StrCpy $INSTDIR $3
     ${EndIf}
   ${EndIf}
 
-  # If did not find a path: use the default dir.
-  ${If} $INSTDIR == ""
-!ifdef WIN64
-    StrCpy $INSTDIR "$PROGRAMFILES64\Vim"
-!else
-    StrCpy $INSTDIR "$PROGRAMFILES\Vim"
-!endif
-  ${EndIf}
-
   ${If} ${RunningX64}
     SetRegView 64
   ${EndIf}

nsis/lang/turkish.nsi

@@ -10,7 +10,7 @@ LangString ^SetupCaption     ${LANG_TURKISH} \
         "$(^Name) Setup"
 LangString ^UninstallCaption ${LANG_TURKISH} \
         "$(^Name) Uninstall"
-        
+
 LangString str_show_readme          ${LANG_TURKISH} \
     "Kurulum bittikten sonra README dosyasını aç"
 
@@ -23,7 +23,7 @@ LangString str_type_minimal         ${LANG_TURKISH} \
 
 LangString str_type_full            ${LANG_TURKISH} \
     "Tam"
-    
+
 ##############################################################################
 # Section Titles & Description                                            {{{1
 ##############################################################################
@@ -62,12 +62,12 @@ LangString str_section_start_menu   ${LANG_TURKISH} \
     "Başlat Menüsü - Programlar klasöründe"
 LangString str_desc_start_menu      ${LANG_TURKISH} \
     "Vim kısayolunu Başlat Menüsüne ekler."
-    
+
 LangString str_section_edit_with    ${LANG_TURKISH} \
     "Vim ile Aç"
 LangString str_desc_edit_with       ${LANG_TURKISH} \
     "Vim'i $\"Birlikte aç$\" sağ tık menüsüne ekler."
-    
+
  LangString str_section_vim_rc       ${LANG_TURKISH} \
     "Bir yapılandırma dosyası oluştur"
 LangString str_desc_vim_rc          ${LANG_TURKISH} \
@@ -93,7 +93,7 @@ LangString str_desc_plugin_vim      ${LANG_TURKISH} \
 LangString str_section_vis_vim      ${LANG_TURKISH} \
     "VisVim eklentisi"
 LangString str_desc_vis_vim         ${LANG_TURKISH} \
-    "Microsoft Visual Studio entegrasyonu için VisVim eklentisi" 
+    "Microsoft Visual Studio entegrasyonu için VisVim eklentisi"
 
 LangString str_section_nls          ${LANG_TURKISH} \
     "Ek dil desteği"
@@ -129,14 +129,14 @@ LangString str_unsection_rootdir    ${LANG_TURKISH} \
     "Vim kök dizinini kaldır"
 LangString str_desc_rm_rootdir      ${LANG_TURKISH} \
     "Vim kök dizinini kaldırır. Bu dizin Vim yapılandırma dosyalarını içerir!"
-    
+
  LangString str_msg_install_fail  ${LANG_TURKISH} \
     "Yükleme başarısız oldu. Yeniden deneyin."
 
 LangString str_msg_rm_exe_fail   ${LANG_TURKISH} \
     "$0 içindeki bazı dosyalar silinemedi!$\r$\n\
      Bu dosyaları el ile kaldırmalısınız."
-     
+
  LangString str_msg_uninstalling  ${LANG_TURKISH} \
     "Eski sürüm kaldırılıyor..."
 

pixmaps/gen-inline-pixbufs.sh

@@ -3,11 +3,9 @@
 prefix=stock_
 list=
 
-for file in "$@"
-do
-    name=`echo "$file" | sed 's|-|_|g; s|^.*/||; s|\..*$||'`
+for file in "$@"; do
+    name=$(echo "$file" | sed 's|-|_|g; s|^.*/||; s|\..*$||')
     list="$list $prefix$name $file"
 done
 
 gdk-pixbuf-csource --raw --static --build-list $list
-

runtime/autoload/ada.vim

@@ -67,13 +67,13 @@ if exists ('g:ada_with_gnat_project_files')
     endfor
 endif
 
-" Section: add	standart exception {{{2
+" Section: add	standard exception {{{2
 "
 for Item in ['Constraint_Error', 'Program_Error', 'Storage_Error', 'Tasking_Error', 'Status_Error', 'Mode_Error', 'Name_Error', 'Use_Error', 'Device_Error', 'End_Error', 'Data_Error', 'Layout_Error', 'Length_Error', 'Pattern_Error', 'Index_Error', 'Translation_Error', 'Time_Error', 'Argument_Error', 'Tag_Error', 'Picture_Error', 'Terminator_Error', 'Conversion_Error', 'Pointer_Error', 'Dereference_Error', 'Update_Error']
     let g:ada#Keywords += [{
 	    \ 'word':  Item,
 	    \ 'menu':  'exception',
-	    \ 'info':  'Ada standart exception.',
+	    \ 'info':  'Ada standard exception.',
 	    \ 'kind':  'x',
 	    \ 'icase': 1}]
 endfor
@@ -210,7 +210,7 @@ function ada#Word (...)
    let l:Line = substitute (getline (l:Line_Nr), g:ada#Comment, '', '' )
 
    " Cope with tag searching for items in comments; if we are, don't loop
-   " backards looking for previous lines
+   " backwards looking for previous lines
    if l:Column_Nr > strlen(l:Line)
       " We were in a comment
       let l:Line = getline(l:Line_Nr)

runtime/autoload/adacomplete.vim

@@ -14,7 +14,7 @@
 "		15.10.2006 MK Bram's suggestion for runtime integration
 "		05.11.2006 MK Bram suggested not to use include protection for
 "			      autoload
-"		05.11.2006 MK Bram suggested agaist using setlocal omnifunc 
+"		05.11.2006 MK Bram suggested against using setlocal omnifunc 
 "		05.11.2006 MK Bram suggested to save on spaces
 "    Help Page: ft-ada-omni
 "------------------------------------------------------------------------------

runtime/autoload/csscomplete.vim

@@ -4,7 +4,7 @@
 "           plus CSS Speech Module <http://www.w3.org/TR/css3-speech/>
 " Maintainer: Kao, Wei-Ko(othree) ( othree AT gmail DOT com )
 " Original Author: Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change: 2018 Jul 02
+" Last Change: 2021 Sep 21
 
 let s:values = split("all additive-symbols align-content align-items align-self animation animation-delay animation-direction animation-duration animation-fill-mode animation-iteration-count animation-name animation-play-state animation-timing-function backface-visibility background background-attachment background-blend-mode background-clip background-color background-image background-origin background-position background-repeat background-size block-size border border-block-end border-block-end-color border-block-end-style border-block-end-width border-block-start border-block-start-color border-block-start-style border-block-start-width border-bottom border-bottom-color border-bottom-left-radius border-bottom-right-radius border-bottom-style border-bottom-width border-collapse border-color border-image border-image-outset border-image-repeat border-image-slice border-image-source border-image-width border-inline-end border-inline-end-color border-inline-end-style border-inline-end-width border-inline-start border-inline-start-color border-inline-start-style border-inline-start-width border-left border-left-color border-left-style border-left-width border-radius border-right border-right-color border-right-style border-right-width border-spacing border-style border-top border-top-color border-top-left-radius border-top-right-radius border-top-style border-top-width border-width bottom box-decoration-break box-shadow box-sizing break-after break-before break-inside caption-side clear clip clip-path color columns column-count column-fill column-gap column-rule column-rule-color column-rule-style column-rule-width column-span column-width content counter-increment counter-reset cue cue-before cue-after cursor direction display empty-cells fallback filter flex flex-basis flex-direction flex-flow flex-grow flex-shrink flex-wrap float font font-family font-feature-settings font-kerning font-language-override font-size font-size-adjust font-stretch font-style font-synthesis font-variant font-variant-alternates font-variant-caps font-variant-east-asian font-variant-ligatures font-variant-numeric font-variant-position font-weight grid grid-area grid-auto-columns grid-auto-flow grid-auto-position grid-auto-rows grid-column grid-column-start grid-column-end grid-row grid-row-start grid-row-end grid-template grid-template-areas grid-template-rows grid-template-columns height hyphens image-rendering image-resolution image-orientation ime-mode inline-size isolation justify-content left letter-spacing line-break line-height list-style list-style-image list-style-position list-style-type margin margin-block-end margin-block-start margin-bottom margin-inline-end margin-inline-start margin-left margin-right margin-top marks mask mask-type max-block-size max-height max-inline-size max-width max-zoom min-block-size min-height min-inline-size min-width min-zoom mix-blend-mode negative object-fit object-position offset-block-end offset-block-start offset-inline-end offset-inline-start opacity order orientation orphans outline outline-color outline-offset outline-style outline-width overflow overflow-wrap overflow-x overflow-y pad padding padding-block-end padding-block-start padding-bottom padding-inline-end padding-inline-start padding-left padding-right padding-top page-break-after page-break-before page-break-inside pause-before pause-after pause perspective perspective-origin pointer-events position prefix quotes range resize rest rest-before rest-after right ruby-align ruby-merge ruby-position scroll-behavior scroll-snap-coordinate scroll-snap-destination scroll-snap-points-x scroll-snap-points-y scroll-snap-type scroll-snap-type-x scroll-snap-type-y shape-image-threshold shape-margin shape-outside speak speak-as suffix symbols system table-layout tab-size text-align text-align-last text-combine-upright text-decoration text-decoration-color text-decoration-line text-emphasis text-emphasis-color text-emphasis-position text-emphasis-style text-indent text-orientation text-overflow text-rendering text-shadow text-transform text-underline-position top touch-action transform transform-box transform-origin transform-style transition transition-delay transition-duration transition-property transition-timing-function unicode-bidi unicode-range user-zoom vertical-align visibility voice-balance voice-duration voice-family voice-pitch voice-rate voice-range voice-stress voice-volume white-space widows width will-change word-break word-spacing word-wrap writing-mode z-index zoom")
 
@@ -38,12 +38,12 @@ function! csscomplete#CompleteCSS(findstart, base)
   if exists("b:compl_context")
     let line = getline('.')
     let compl_begin = col('.') - 2
-    let after = line[compl_begin:]
+    let b:after = line[compl_begin:]
     let line = b:compl_context
     unlet! b:compl_context
   else
     let line = a:base
-    let after = ''
+    let b:after = ''
   endif
 
   let res = []
@@ -311,7 +311,7 @@ function! csscomplete#CompleteCSS(findstart, base)
       let values = ["normal", "italic", "oblique", "small-caps", "bold", "bolder", "lighter", "100", "200", "300", "400", "500", "600", "700", "800", "900", "xx-small", "x-small", "small", "medium", "large", "x-large", "xx-large", "larger", "smaller", "sans-serif", "serif", "monospace", "cursive", "fantasy", "caption", "icon", "menu", "message-box", "small-caption", "status-bar"]
     elseif prop =~ '^\%(height\|width\)$'
       let values = ["auto", "border-box", "content-box", "max-content", "min-content", "available", "fit-content"]
-    elseif prop =~ '^\%(left\|rigth\)$'
+    elseif prop =~ '^\%(left\|right\)$'
       let values = ["auto"]
     elseif prop == 'image-rendering'
       let values = ["auto", "crisp-edges", "pixelated"]

runtime/autoload/decada.vim

@@ -23,7 +23,7 @@ endif
 
 function decada#Unit_Name () dict				     " {{{1
     "	Convert filename into acs unit:
-    "	    1:  remove the file extenstion.
+    "	    1:  remove the file extension.
     "	    2:  replace all double '_' or '-' with an dot (which denotes a separate)
     "	    3:  remove a trailing '_' (which denotes a specification)
     return substitute (substitute (expand ("%:t:r"), '__\|-', ".", "g"), '_$', "", '')

runtime/autoload/dist/ft.vim

@@ -264,6 +264,14 @@ func dist#ft#ProtoCheck(default)
 endfunc
 
 func dist#ft#FTm()
+  if exists("g:filetype_m")
+    exe "setf " . g:filetype_m
+    return
+  endif
+
+  " excluding end(for|function|if|switch|while) common to Murphi
+  let octave_block_terminators = '\<end\%(_try_catch\|classdef\|enumeration\|events\|methods\|parfor\|properties\)\>'
+
   let n = 1
   let saw_comment = 0 " Whether we've seen a multiline comment leader.
   while n < 100
@@ -278,6 +286,12 @@ func dist#ft#FTm()
       setf objc
       return
     endif
+    if line =~ '^\s*\%(#\|%!\)' || line =~ '^\s*unwind_protect\>' ||
+	  \ line =~ '\%(^\|;\)\s*' .. octave_block_terminators
+      setf octave
+      return
+    endif
+    " TODO: could be Matlab or Octave
     if line =~ '^\s*%'
       setf matlab
       return
@@ -298,11 +312,8 @@ func dist#ft#FTm()
     " or Murphi based on the comment leader. Assume the former as it is more
     " common.
     setf objc
-  elseif exists("g:filetype_m")
-    " Use user specified default filetype for .m
-    exe "setf " . g:filetype_m
   else
-    " Default is matlab
+    " Default is Matlab
     setf matlab
   endif
 endfunc

runtime/autoload/getscript.vim

@@ -129,7 +129,7 @@ fun! getscript#GetLatestVimScripts()
 " insure that wget is executable
   if executable(g:GetLatestVimScripts_wget) != 1
    echoerr "GetLatestVimScripts needs ".g:GetLatestVimScripts_wget." which apparently is not available on your system"
-"   call Dret("GetLatestVimScripts : wget not executable/availble")
+"   call Dret("GetLatestVimScripts : wget not executable/available")
    return
   endif
 
@@ -347,7 +347,7 @@ fun! s:GetOneScript(...)
   set t_ti= t_te= nors
 
  " put current line on top-of-screen and interpret it into
- " a      script identifer  : used to obtain webpage
+ " a      script identifier  : used to obtain webpage
  "        source identifier : used to identify current version
  " and an associated comment: used to report on what's being considered
   if a:0 >= 3

runtime/autoload/haskellcomplete.vim

@@ -54,7 +54,7 @@ function! haskellcomplete#Complete(findstart, base)
 
     if b:completingLangExtension
         if a:base ==? ""
-            " Return all posible Lang extensions
+            " Return all possible Lang extensions
             return s:langExtensions
         else
             let l:matches = []
@@ -70,7 +70,7 @@ function! haskellcomplete#Complete(findstart, base)
 
     elseif b:completingOptionsGHC
         if a:base ==? ""
-            " Return all posible GHC options
+            " Return all possible GHC options
             return s:optionsGHC
         else
             let l:matches = []
@@ -86,7 +86,7 @@ function! haskellcomplete#Complete(findstart, base)
 
     elseif b:completingModule
         if a:base ==? ""
-            " Return all posible modules
+            " Return all possible modules
             return s:commonModules
         else
             let l:matches = []

runtime/autoload/htmlcomplete.vim

@@ -486,7 +486,7 @@ function! htmlcomplete#CompleteTags(findstart, base)
 			endif
 		endif
 		" Value of attribute completion {{{
-		" If attr contains =\s*[\"'] we catched value of attribute
+		" If attr contains =\s*[\"'] we match value of attribute
 		if attr =~ "=\s*[\"']" || attr =~ "=\s*$"
 			" Let do attribute specific completion
 			let attrname = matchstr(attr, '.*\ze\s*=')

runtime/autoload/netrw.vim

@@ -1,7 +1,7 @@
 " netrw.vim: Handles file transfer and remote directory listing across
 "            AUTOLOAD SECTION
-" Date:		Sep 18, 2020
-" Version:	170
+" Date:		Aug 16, 2021
+" Version:	171
 " Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
 " GetLatestVimScripts: 1075 1 :AutoInstall: netrw.vim
 " Copyright:    Copyright (C) 2016 Charles E. Campbell {{{1
@@ -43,7 +43,7 @@ if exists("s:needspatches")
  endfor
 endif
 
-let g:loaded_netrw = "v170"
+let g:loaded_netrw = "v171"
 if !exists("s:NOTE")
  let s:NOTE    = 0
  let s:WARNING = 1
@@ -93,7 +93,7 @@ fun! netrw#ErrorMsg(level,msg,errnum)
    else
     let msg= level.a:msg
    endif
-   let s:popuperr_id  = popup_beval(msg,{})
+   let s:popuperr_id  = popup_atcursor(msg,{})
    let s:popuperr_text= ""
  elseif g:netrw_use_errorwindow
    " (default) netrw creates a one-line window to show error/warning
@@ -322,6 +322,7 @@ call s:NetrwInit("g:netrw_banner"      , 1)
 call s:NetrwInit("g:netrw_browse_split", 0)
 call s:NetrwInit("g:netrw_bufsettings" , "noma nomod nonu nobl nowrap ro nornu")
 call s:NetrwInit("g:netrw_chgwin"      , -1)
+call s:NetrwInit("g:netrw_clipboard"   , 1)
 call s:NetrwInit("g:netrw_compress"    , "gzip")
 call s:NetrwInit("g:netrw_ctags"       , "ctags")
 if exists("g:netrw_cursorline") && !exists("g:netrw_cursor")
@@ -331,6 +332,7 @@ endif
 call s:NetrwInit("g:netrw_cursor"      , 2)
 let s:netrw_usercul = &cursorline
 let s:netrw_usercuc = &cursorcolumn
+"call Decho("(netrw) COMBAK: cuc=".&l:cuc." cul=".&l:cul." initialization of s:netrw_cu[cl]")
 call s:NetrwInit("g:netrw_cygdrive","/cygdrive")
 " Default values - d-g ---------- {{{3
 call s:NetrwInit("s:didstarstar",0)
@@ -703,7 +705,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
   endif
 
   " save registers
-  if has("clipboard")
+  if has("clipboard") && g:netrw_clipboard
 "   call Decho("(netrw#Explore) save @* and @+",'~'.expand("<slnum>"))
    sil! let keepregstar = @*
    sil! let keepregplus = @+
@@ -931,7 +933,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
 "     call Decho("..case Nexplore with starpat=".starpat.": (indx=".indx.")",'~'.expand("<slnum>"))
      if !exists("w:netrw_explore_list") " sanity check
       NetrwKeepj call netrw#ErrorMsg(s:WARNING,"using Nexplore or <s-down> improperly; see help for netrw-starstar",40)
-      if has("clipboard")
+      if has("clipboard") && g:netrw_clipboard
 "       call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
        if @* != keepregstar | sil! let @* = keepregstar | endif
        if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -957,7 +959,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
 "     call Decho("case Pexplore with starpat=".starpat.": (indx=".indx.")",'~'.expand("<slnum>"))
      if !exists("w:netrw_explore_list") " sanity check
       NetrwKeepj call netrw#ErrorMsg(s:WARNING,"using Pexplore or <s-up> improperly; see help for netrw-starstar",41)
-      if has("clipboard")
+      if has("clipboard") && g:netrw_clipboard
 "       call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
        if @* != keepregstar | sil! let @* = keepregstar | endif
        if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -1013,7 +1015,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
       catch /^Vim\%((\a\+)\)\=:E480/
        keepalt call netrw#ErrorMsg(s:WARNING,'no files matched pattern<'.pattern.'>',45)
        if &hls | let keepregslash= s:ExplorePatHls(pattern) | endif
-       if has("clipboard")
+       if has("clipboard") && g:netrw_clipboard
 "        call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
         if @* != keepregstar | sil! let @* = keepregstar | endif
         if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -1050,7 +1052,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
 
      if w:netrw_explore_listlen == 0 || (w:netrw_explore_listlen == 1 && w:netrw_explore_list[0] =~ '\*\*\/')
       keepalt NetrwKeepj call netrw#ErrorMsg(s:WARNING,"no files matched",42)
-      if has("clipboard")
+      if has("clipboard") && g:netrw_clipboard
 "       call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
         if @* != keepregstar | sil! let @* = keepregstar | endif
         if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -1099,7 +1101,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
     if !exists("g:netrw_quiet")
      keepalt NetrwKeepj call netrw#ErrorMsg(s:WARNING,"your vim needs the +path_extra feature for Exploring with **!",44)
     endif
-    if has("clipboard")
+    if has("clipboard") && g:netrw_clipboard
 "     call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
       if @* != keepregstar | sil! let @* = keepregstar | endif
       if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -1173,7 +1175,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
   " there's no danger of a late FocusGained event on initialization.
   " Consequently, set s:netrw_events to 2.
   let s:netrw_events= 2
-  if has("clipboard")
+  if has("clipboard") && g:netrw_clipboard
 "   call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
    if @* != keepregstar | sil! let @* = keepregstar | endif
    if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -1641,7 +1643,8 @@ endfun
 fun! s:NetrwOptionsSave(vt)
 "  call Dfunc("s:NetrwOptionsSave(vt<".a:vt.">) win#".winnr()." buf#".bufnr("%")."<".bufname(bufnr("%")).">"." winnr($)=".winnr("$")." mod=".&mod." ma=".&ma)
 "  call Decho(a:vt."netrw_optionsave".(exists("{a:vt}netrw_optionsave")? ("=".{a:vt}netrw_optionsave) : " doesn't exist"),'~'.expand("<slnum>"))
-"  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
+"  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt." hid=".&hid,'~'.expand("<slnum>"))
+"  call Decho("(s:NetrwOptionsSave) lines=".&lines)
 
   if !exists("{a:vt}netrw_optionsave")
    let {a:vt}netrw_optionsave= 1
@@ -1667,6 +1670,9 @@ fun! s:NetrwOptionsSave(vt)
   let {a:vt}netrw_cinokeep  = &l:cino
   let {a:vt}netrw_comkeep   = &l:com
   let {a:vt}netrw_cpokeep   = &l:cpo
+  let {a:vt}netrw_cuckeep   = &l:cuc
+  let {a:vt}netrw_culkeep   = &l:cul
+"  call Decho("(s:NetrwOptionsSave) COMBAK: cuc=".&l:cuc." cul=".&l:cul)
   let {a:vt}netrw_diffkeep  = &l:diff
   let {a:vt}netrw_fenkeep   = &l:fen
   if !exists("g:netrw_ffkeep") || g:netrw_ffkeep
@@ -1674,9 +1680,11 @@ fun! s:NetrwOptionsSave(vt)
   endif
   let {a:vt}netrw_fokeep    = &l:fo           " formatoptions
   let {a:vt}netrw_gdkeep    = &l:gd           " gdefault
+  let {a:vt}netrw_gokeep    = &l:go           " guioptions
   let {a:vt}netrw_hidkeep   = &l:hidden
   let {a:vt}netrw_imkeep    = &l:im
   let {a:vt}netrw_iskkeep   = &l:isk
+  let {a:vt}netrw_lines     = &lines
   let {a:vt}netrw_lskeep    = &l:ls
   let {a:vt}netrw_makeep    = &l:ma
   let {a:vt}netrw_magickeep = &l:magic
@@ -1702,12 +1710,13 @@ fun! s:NetrwOptionsSave(vt)
    let {a:vt}netrw_dirkeep  = getcwd()
 "   call Decho("saving to ".a:vt."netrw_dirkeep<".{a:vt}netrw_dirkeep.">",'~'.expand("<slnum>"))
   endif
-  if has("clipboard")
+  if has("clipboard") && g:netrw_clipboard
    sil! let {a:vt}netrw_starkeep = @*
    sil! let {a:vt}netrw_pluskeep = @+
   endif
   sil! let {a:vt}netrw_slashkeep= @/
 
+"  call Decho("(s:NetrwOptionsSave) lines=".&lines)
 "  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
 "  call Dret("s:NetrwOptionsSave : tab#".tabpagenr()." win#".winnr())
 endfun
@@ -1732,12 +1741,18 @@ fun! s:NetrwOptionsSafe(islocal)
   endif
   call s:NetrwSetSafeSetting("&l:ci",0)
   call s:NetrwSetSafeSetting("&l:cin",0)
-  call s:NetrwSetSafeSetting("&l:bh","hide")
+  if g:netrw_fastbrowse > a:islocal
+   call s:NetrwSetSafeSetting("&l:bh","hide")
+  else
+   call s:NetrwSetSafeSetting("&l:bh","delete")
+  endif
   call s:NetrwSetSafeSetting("&l:cino","")
   call s:NetrwSetSafeSetting("&l:com","")
   if &cpo =~ 'a' | call s:NetrwSetSafeSetting("&cpo",substitute(&cpo,'a','','g')) | endif
   if &cpo =~ 'A' | call s:NetrwSetSafeSetting("&cpo",substitute(&cpo,'A','','g')) | endif
   setl fo=nroql2
+  " call s:NetrwSetSafeSetting("&go","begmr")
+  if &go =~ '\ca' | call s:NetrwSetSafeSetting("&go",substitute(&go,'\ca','','g')) | endif
   call s:NetrwSetSafeSetting("&l:hid",0)
   call s:NetrwSetSafeSetting("&l:im",0)
   setl isk+=@ isk+=* isk+=/
@@ -1751,7 +1766,10 @@ fun! s:NetrwOptionsSafe(islocal)
   call s:NetrwSetSafeSetting("&l:tw",0)
   call s:NetrwSetSafeSetting("&l:wig","")
   setl cedit&
-  call s:NetrwCursor()
+
+  " set up cuc and cul based on g:netrw_cursor and listing style
+  " COMBAK -- cuc cul related
+  call s:NetrwCursor(0)
 
   " allow the user to override safe options
 "  call Decho("ft<".&ft."> ei=".&ei,'~'.expand("<slnum>"))
@@ -1769,11 +1787,14 @@ endfun
 " s:NetrwOptionsRestore: restore options (based on prior s:NetrwOptionsSave) {{{2
 fun! s:NetrwOptionsRestore(vt)
 "  call Dfunc("s:NetrwOptionsRestore(vt<".a:vt.">) win#".winnr()." buf#".bufnr("%")."<".bufname("%")."> winnr($)=".winnr("$"))
+"  call Decho("(s:NetrwOptionsRestore) lines=".&lines)
 "  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
   if !exists("{a:vt}netrw_optionsave")
 "   call Decho("case ".a:vt."netrw_optionsave : doesn't exist",'~'.expand("<slnum>"))
-"   call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
-"   call Decho("ro=".&l:ro." ma=".&l:ma." mod=".&l:mod." wrap=".&l:wrap." (filename<".expand("%")."> win#".winnr()." ft<".&ft.">)",'~'.expand("<slnum>"))
+"   call Decho("..doing filetype detect anyway")
+   filetype detect
+"   call Decho("..settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
+"   call Decho("..ro=".&l:ro." ma=".&l:ma." mod=".&l:mod." wrap=".&l:wrap." (filename<".expand("%")."> win#".winnr()." ft<".&ft.">)",'~'.expand("<slnum>"))
 "   call Dret("s:NetrwOptionsRestore : ".a:vt."netrw_optionsave doesn't exist")
    return
   endif
@@ -1790,41 +1811,53 @@ fun! s:NetrwOptionsRestore(vt)
     endif
    endif
   endif
+"  call Decho("(s:NetrwOptionsRestore) #1 lines=".&lines)
   call s:NetrwRestoreSetting(a:vt."netrw_aikeep","&l:ai")
   call s:NetrwRestoreSetting(a:vt."netrw_awkeep","&l:aw")
   call s:NetrwRestoreSetting(a:vt."netrw_blkeep","&l:bl")
   call s:NetrwRestoreSetting(a:vt."netrw_btkeep","&l:bt")
   call s:NetrwRestoreSetting(a:vt."netrw_bombkeep","&l:bomb")
+"  call Decho("(s:NetrwOptionsRestore) #2 lines=".&lines)
   call s:NetrwRestoreSetting(a:vt."netrw_cedit","&cedit")
   call s:NetrwRestoreSetting(a:vt."netrw_cikeep","&l:ci")
   call s:NetrwRestoreSetting(a:vt."netrw_cinkeep","&l:cin")
   call s:NetrwRestoreSetting(a:vt."netrw_cinokeep","&l:cino")
   call s:NetrwRestoreSetting(a:vt."netrw_comkeep","&l:com")
+"  call Decho("(s:NetrwOptionsRestore) #3 lines=".&lines)
   call s:NetrwRestoreSetting(a:vt."netrw_cpokeep","&l:cpo")
   call s:NetrwRestoreSetting(a:vt."netrw_diffkeep","&l:diff")
   call s:NetrwRestoreSetting(a:vt."netrw_fenkeep","&l:fen")
   if exists("g:netrw_ffkeep") && g:netrw_ffkeep
    call s:NetrwRestoreSetting(a:vt."netrw_ffkeep")","&l:ff")
   endif
-  call s:NetrwRestoreSetting(a:vt."netrw_fokeep","&l:fo")
-  call s:NetrwRestoreSetting(a:vt."netrw_gdkeep","&l:gd")
-  call s:NetrwRestoreSetting(a:vt."netrw_hidkeep","&l:hidden")
-  call s:NetrwRestoreSetting(a:vt."netrw_imkeep","&l:im")
-  call s:NetrwRestoreSetting(a:vt."netrw_iskkeep","&l:isk")
-  call s:NetrwRestoreSetting(a:vt."netrw_lskeep","&l:ls")
-  call s:NetrwRestoreSetting(a:vt."netrw_makeep","&l:ma")
+"  call Decho("(s:NetrwOptionsRestore) #4 lines=".&lines)
+  call s:NetrwRestoreSetting(a:vt."netrw_fokeep"   ,"&l:fo")
+  call s:NetrwRestoreSetting(a:vt."netrw_gdkeep"   ,"&l:gd")
+  call s:NetrwRestoreSetting(a:vt."netrw_gokeep"   ,"&l:go")
+  call s:NetrwRestoreSetting(a:vt."netrw_hidkeep"  ,"&l:hidden")
+"  call Decho("(s:NetrwOptionsRestore) #5 lines=".&lines)
+  call s:NetrwRestoreSetting(a:vt."netrw_imkeep"   ,"&l:im")
+  call s:NetrwRestoreSetting(a:vt."netrw_iskkeep"  ,"&l:isk")
+"  call Decho("(s:NetrwOptionsRestore) #6 lines=".&lines)
+  call s:NetrwRestoreSetting(a:vt."netrw_lines"    ,"&lines")
+"  call Decho("(s:NetrwOptionsRestore) #7 lines=".&lines)
+  call s:NetrwRestoreSetting(a:vt."netrw_lskeep"   ,"&l:ls")
+  call s:NetrwRestoreSetting(a:vt."netrw_makeep"   ,"&l:ma")
   call s:NetrwRestoreSetting(a:vt."netrw_magickeep","&l:magic")
-  call s:NetrwRestoreSetting(a:vt."netrw_modkeep","&l:mod")
-  call s:NetrwRestoreSetting(a:vt."netrw_nukeep","&l:nu")
-  call s:NetrwRestoreSetting(a:vt."netrw_rnukeep","&l:rnu")
-  call s:NetrwRestoreSetting(a:vt."netrw_repkeep","&l:report")
-  call s:NetrwRestoreSetting(a:vt."netrw_rokeep","&l:ro")
-  call s:NetrwRestoreSetting(a:vt."netrw_selkeep","&l:sel")
+  call s:NetrwRestoreSetting(a:vt."netrw_modkeep"  ,"&l:mod")
+  call s:NetrwRestoreSetting(a:vt."netrw_nukeep"   ,"&l:nu")
+"  call Decho("(s:NetrwOptionsRestore) #8 lines=".&lines)
+  call s:NetrwRestoreSetting(a:vt."netrw_rnukeep"  ,"&l:rnu")
+  call s:NetrwRestoreSetting(a:vt."netrw_repkeep"  ,"&l:report")
+  call s:NetrwRestoreSetting(a:vt."netrw_rokeep"   ,"&l:ro")
+  call s:NetrwRestoreSetting(a:vt."netrw_selkeep"  ,"&l:sel")
+"  call Decho("(s:NetrwOptionsRestore) #9 lines=".&lines)
   call s:NetrwRestoreSetting(a:vt."netrw_spellkeep","&l:spell")
-  call s:NetrwRestoreSetting(a:vt."netrw_twkeep","&l:tw")
-  call s:NetrwRestoreSetting(a:vt."netrw_wigkeep","&l:wig")
-  call s:NetrwRestoreSetting(a:vt."netrw_wrapkeep","&l:wrap")
+  call s:NetrwRestoreSetting(a:vt."netrw_twkeep"   ,"&l:tw")
+  call s:NetrwRestoreSetting(a:vt."netrw_wigkeep"  ,"&l:wig")
+  call s:NetrwRestoreSetting(a:vt."netrw_wrapkeep" ,"&l:wrap")
   call s:NetrwRestoreSetting(a:vt."netrw_writekeep","&l:write")
+"  call Decho("(s:NetrwOptionsRestore) #10 lines=".&lines)
   call s:NetrwRestoreSetting("s:yykeep","@@")
   " former problem: start with liststyle=0; press <i> : result, following line resets l:ts.
   " Fixed; in s:PerformListing, when w:netrw_liststyle is s:LONGLIST, will use a printf to pad filename with spaces
@@ -1855,7 +1888,7 @@ fun! s:NetrwOptionsRestore(vt)
     unlet {a:vt}netrw_dirkeep
    endif
   endif
-  if has("clipboard")
+  if has("clipboard") && g:netrw_clipboard
 "   call Decho("has clipboard",'~'.expand("<slnum>"))
    call s:NetrwRestoreSetting(a:vt."netrw_starkeep","@*")
    call s:NetrwRestoreSetting(a:vt."netrw_pluskeep","@+")
@@ -1871,9 +1904,11 @@ fun! s:NetrwOptionsRestore(vt)
   " were having their filetype detect-generated settings overwritten by
   " NetrwOptionRestore.
   if &ft != "netrw"
-"   call Decho("filetype detect  (ft=".&ft.")",'~'.expand("<slnum>"))
+"   call Decho("before: filetype detect  (ft=".&ft.")",'~'.expand("<slnum>"))
    filetype detect
+"   call Decho("after : filetype detect  (ft=".&ft.")",'~'.expand("<slnum>"))
   endif
+"  call Decho("(s:NetrwOptionsRestore) lines=".&lines)
 "  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
 "  call Dret("s:NetrwOptionsRestore : tab#".tabpagenr()." win#".winnr()." buf#".bufnr("%")."<".bufname("%")."> modified=".&modified." modifiable=".&modifiable." readonly=".&readonly)
 endfun
@@ -1923,7 +1958,7 @@ fun! s:NetrwRestoreSetting(keepvar,setting)
   " typically called from s:NetrwOptionsRestore
   "   call s:NetrwRestoreSettings(keep-option-variable-name,'associated-option')
   "   ex. call s:NetrwRestoreSetting(a:vt."netrw_selkeep","&l:sel")
-  "  Restores option (if different) from a keepvar
+  "  Restores option (but only if different) from a:keepvar
   if exists(a:keepvar)
    exe "let keepvarval= ".a:keepvar
    exe "let setting= ".a:setting
@@ -2845,14 +2880,16 @@ fun! netrw#SetTreetop(iscmd,...)
 "  call Decho("inittreetop<".(exists("inittreetop")? inittreetop : "n/a").">")
 
   if (a:iscmd == 0 || a:1 == "") && exists("inittreetop")
-   let treedir= s:NetrwTreePath(inittreetop)
+   let treedir         = s:NetrwTreePath(inittreetop)
 "   call Decho("treedir<".treedir.">",'~'.expand("<slnum>"))
   else
    if isdirectory(s:NetrwFile(a:1))
 "    call Decho("a:1<".a:1."> is a directory",'~'.expand("<slnum>"))
-    let treedir= a:1
+    let treedir         = a:1
+    let s:netrw_treetop = treedir
    elseif exists("b:netrw_curdir") && (isdirectory(s:NetrwFile(b:netrw_curdir."/".a:1)) || a:1 =~ '^\a\{3,}://')
-    let treedir= b:netrw_curdir."/".a:1
+    let treedir         = b:netrw_curdir."/".a:1
+    let s:netrw_treetop = treedir
 "    call Decho("a:1<".a:1."> is NOT a directory, using treedir<".treedir.">",'~'.expand("<slnum>"))
    else
     " normally the cursor is left in the message window.
@@ -2860,7 +2897,8 @@ fun! netrw#SetTreetop(iscmd,...)
     let netrwbuf= bufnr("%")
     call netrw#ErrorMsg(s:ERROR,"sorry, ".a:1." doesn't seem to be a directory!",95)
     exe bufwinnr(netrwbuf)."wincmd w"
-    let treedir= "."
+    let treedir         = "."
+    let s:netrw_treetop = getcwd()
    endif
   endif
 "  call Decho("treedir<".treedir.">",'~'.expand("<slnum>"))
@@ -4115,6 +4153,7 @@ fun! s:NetrwFileInfo(islocal,fname)
    elseif g:netrw_sizestyle =~# 'h'
     let lsopt= "-lsadh --si"
    endif
+"   call Decho("(s:NetrwFileInfo) lsopt<".lsopt.">")
    if (has("unix") || has("macunix")) && executable("/bin/ls")
 
     if getline(".") == "../"
@@ -4176,9 +4215,10 @@ endfun
 " s:NetrwGetBuffer: [get a new|find an old netrw] buffer for a netrw listing {{{2
 "   returns 0=cleared buffer
 "           1=re-used buffer (buffer not cleared)
+"  Nov 09, 2020: tst952 shows that when user does :set hidden that NetrwGetBuffer will come up with a [No Name] buffer (hid fix)
 fun! s:NetrwGetBuffer(islocal,dirname)
 "  call Dfunc("s:NetrwGetBuffer(islocal=".a:islocal." dirname<".a:dirname.">) liststyle=".g:netrw_liststyle)
-"  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo,'~'.expand("<slnum>"))
+"  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." hid=".&hid,'~'.expand("<slnum>"))
 "  call Decho("netrwbuf dictionary=".(exists("s:netrwbuf")? string(s:netrwbuf) : 'n/a'),'~'.expand("<slnum>"))
 "  call Dredir("ls!","s:NetrwGetBuffer")
   let dirname= a:dirname
@@ -4228,17 +4268,26 @@ fun! s:NetrwGetBuffer(islocal,dirname)
   endif
 "  call Decho("  bufnum#".bufnum,'~'.expand("<slnum>"))
 
-  " highjack the current buffer if
-  "   it has the desired name
-  "   it is empty
-"  call Decho("deciding if I can highjack the current buffer#".bufnr("%"),'~'.expand("<slnum>"))
-"  call Decho("..dirname<".dirname.">",'~'.expand("<slnum>"))
-"  call Decho("..bufname<".bufname("%").">",'~'.expand("<slnum>"))
-"  call Decho("..getline($)<".getline("$").">",'~'.expand("<slnum>"))
-  if dirname == bufname("%") && line("$") == 1 && getline("%") == ""
+  " hijack the current buffer
+  "   IF the buffer already has the desired name
+  "   AND it is empty
+  let curbuf = bufname("%")
+  if curbuf == '.'
+   let curbuf = getcwd()
+  endif
+"  call Dredir("ls!","NetrwGetFile (renamed buffer back to remote filename<".rfile."> : expand(%)<".expand("%").">)")
+"  call Decho("deciding if netrw may hijack the current buffer#".bufnr("%")."<".curbuf.">",'~'.expand("<slnum>"))
+"  call Decho("..dirname<".dirname.">  IF dirname == bufname",'~'.expand("<slnum>"))
+"  call Decho("..curbuf<".curbuf.">",'~'.expand("<slnum>"))
+"  call Decho("..line($)=".line("$")." AND this is 1",'~'.expand("<slnum>"))
+"  call Decho("..getline(%)<".getline("%").">  AND this line is empty",'~'.expand("<slnum>"))
+  if dirname == curbuf && line("$") == 1 && getline("%") == ""
 "   call Dret("s:NetrwGetBuffer 0<cleared buffer> : highjacking buffer#".bufnr("%"))
    return 0
+  else  " DEBUG
+"   call Decho("..did NOT hijack buffer",'~'.expand("<slnum>"))
   endif
+  " Aug 14, 2021: was thinking about looking for a [No Name] buffer here and using it, but that might cause problems
 
   " get enew buffer and name it -or- re-use buffer {{{3
   if bufnum < 0      " get enew buffer and name it
@@ -4563,7 +4612,7 @@ fun! s:NetrwListStyle(islocal)
   " refresh the listing
 "  call Decho("refresh the listing",'~'.expand("<slnum>"))
   NetrwKeepj call s:NetrwRefresh(a:islocal,s:NetrwBrowseChgDir(a:islocal,'./'))
-  NetrwKeepj call s:NetrwCursor()
+  NetrwKeepj call s:NetrwCursor(0)
 
   " repoint t:netrw_lexbufnr if appropriate
   if exists("repointlexbufnr")
@@ -4769,7 +4818,7 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
   endif
 "  call Decho("b:netrw_curdir<".b:netrw_curdir.">")
 
-  " NetrwBrowseChgDir: save options and initialize {{{3
+  " NetrwBrowseChgDir; save options and initialize {{{3
 "  call Decho("saving options",'~'.expand("<slnum>"))
   call s:SavePosn(s:netrw_posn)
   NetrwKeepj call s:NetrwOptionsSave("s:")
@@ -4837,6 +4886,8 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
    if exists("w:netrw_liststyle") && w:netrw_liststyle == s:TREELIST && exists("w:netrw_treedict") && newdir !~ '^\(/\|\a:\)'
 "    call Decho("edit-a-file: handle tree listing: w:netrw_treedict<".(exists("w:netrw_treedict")? string(w:netrw_treedict) : 'n/a').">",'~'.expand("<slnum>"))
 "    call Decho("edit-a-file: newdir<".newdir.">",'~'.expand("<slnum>"))
+"    let newdir = s:NetrwTreePath(s:netrw_treetop)
+"    call Decho("edit-a-file: COMBAK why doesn't this recognize file1's directory???")
     let dirname= s:NetrwTreeDir(a:islocal)
     "COMBAK : not working for a symlink -- but what about a regular file? a directory?
 "    call Decho("COMBAK : not working for a symlink -- but what about a regular file? a directory?")
@@ -4950,7 +5001,8 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
       exe "NetrwKeepj e ".fnameescape(dirname)
      endif
 "     call Decho("edit-a-file: after e! ".dirname.": hidden=".&hidden." bufhidden<".&bufhidden."> mod=".&mod,'~'.expand("<slnum>"))
-     call s:NetrwCursor()
+     " COMBAK -- cuc cul related
+     call s:NetrwCursor(1)
      if &hidden || &bufhidden == "hide"
       " file came from vim's hidden storage.  Don't "restore" options with it.
       let dorestore= 0
@@ -4971,8 +5023,8 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
      elseif type(g:Netrw_funcref) == 3
 "      call Decho("edit-a-file: handling a list of g:Netrw_funcrefs",'~'.expand("<slnum>"))
       for Fncref in g:Netrw_funcref
-       if type(FncRef) == 2
-        NetrwKeepj call FncRef()
+       if type(Fncref) == 2
+        NetrwKeepj call Fncref()
        endif
       endfor
      endif
@@ -5264,6 +5316,12 @@ fun! netrw#BrowseX(fname,remote)
   endif
 "  call Decho("not a local file nor a webpage request",'~'.expand("<slnum>"))
 
+  if exists("g:netrw_browsex_viewer") && exists("g:netrw_browsex_support_remote") && !g:netrw_browsex_support_remote
+    let remote = a:remote
+  else
+    let remote = 0
+  endif
+
   let ykeep      = @@
   let screenposn = winsaveview()
 "  call Decho("saving posn to screenposn<".string(screenposn).">",'~'.expand("<slnum>"))
@@ -5308,9 +5366,9 @@ fun! netrw#BrowseX(fname,remote)
   endif
 "  call Decho("exten<".exten.">",'~'.expand("<slnum>"))
 
-  if a:remote == 1
+  if remote == 1
    " create a local copy
-"   call Decho("remote: a:remote=".a:remote.": create a local copy of <".a:fname.">",'~'.expand("<slnum>"))
+"   call Decho("remote: remote=".remote.": create a local copy of <".a:fname.">",'~'.expand("<slnum>"))
    setl bh=delete
    call netrw#NetRead(3,a:fname)
    " attempt to rename tempfile
@@ -5332,7 +5390,7 @@ fun! netrw#BrowseX(fname,remote)
     let fname= s:netrw_tmpfile
    endif
   else
-"   call Decho("local: a:remote=".a:remote.": handling local copy of <".a:fname.">",'~'.expand("<slnum>"))
+"   call Decho("local: remote=".remote.": handling local copy of <".a:fname.">",'~'.expand("<slnum>"))
    let fname= a:fname
    " special ~ handler for local
    if fname =~ '^\~' && expand("$HOME") != ""
@@ -5426,8 +5484,8 @@ fun! netrw#BrowseX(fname,remote)
    if a:fname =~ '^https\=://'
     " atril does not appear to understand how to handle html -- so use gvim to edit the document
     let use_ctrlo= 0
-"    call Decho("(COMBAK) fname<".fname.">")
-"    call Decho("(COMBAK) a:fname<".a:fname.">")
+"    call Decho("fname<".fname.">")
+"    call Decho("a:fname<".a:fname.">")
     call s:NetrwExe("sil! !gvim ".fname.' -c "keepj keepalt file '.fnameescape(a:fname).'"')
 
    else
@@ -5475,12 +5533,12 @@ fun! netrw#BrowseX(fname,remote)
   "          return to prior buffer (directory listing)
   "          Feb 12, 2008: had to de-activiate removal of
   "          temporary file because it wasn't getting seen.
-"  if a:remote == 1 && fname != a:fname
+"  if remote == 1 && fname != a:fname
 ""   call Decho("deleting temporary file<".fname.">",'~'.expand("<slnum>"))
 "   call s:NetrwDelete(fname)
 "  endif
 
-  if a:remote == 1
+  if remote == 1
    setl bh=delete bt=nofile
    if g:netrw_use_noswf
     setl noswf
@@ -5539,7 +5597,7 @@ fun! s:NetrwBufRename(newname)
    let b:junk= 1
 "   call Decho("rename buffer: sil! keepj keepalt file ".fnameescape(a:newname),'~'.expand("<slnum>"))
    exe 'sil! keepj keepalt file '.fnameescape(a:newname)
-"   call Dredir("ls!","s:NetrwBufRename (before bwipe)")
+"   call Dredir("ls!","s:NetrwBufRename (before bwipe)~".expand("<slnum>"))
    let oldbufnr= bufnr(oldbufname)
 "   call Decho("oldbufname<".oldbufname."> oldbufnr#".oldbufnr,'~'.expand("<slnum>"))
 "   call Decho("bufnr(%)=".bufnr("%"),'~'.expand("<slnum>"))
@@ -5548,6 +5606,9 @@ fun! s:NetrwBufRename(newname)
     exe "bwipe! ".oldbufnr
 "   else " Decho
 "    call Decho("did *not* bwipe buf#".oldbufnr,'~'.expand("<slnum>"))
+"    call Decho("..reason: if oldbufname<".oldbufname."> is empty",'~'.expand("<slnum>"))"
+"    call Decho("..reason: if oldbufnr#".oldbufnr." is -1",'~'.expand("<slnum>"))"
+"    call Decho("..reason: if oldbufnr#".oldbufnr." != bufnr(%)#".bufnr("%"),'~'.expand("<slnum>"))"
    endif
 "   call Dredir("ls!","s:NetrwBufRename (after rename)")
 "  else " Decho
@@ -6536,7 +6597,7 @@ fun! s:NetrwMaps(islocal)
    if !hasmapto('<Plug>NetrwRefresh')
     nmap <buffer> <unique> <c-l> <Plug>NetrwRefresh
    endif
-   nnoremap <buffer> <silent> <Plug>NetrwRefresh		<c-l>:call <SID>NetrwRefresh(1,<SID>NetrwBrowseChgDir(1,(w:netrw_liststyle == 3)? w:netrw_treetop : './'))<cr>
+   nnoremap <buffer> <silent> <Plug>NetrwRefresh		<c-l>:call <SID>NetrwRefresh(1,<SID>NetrwBrowseChgDir(1,(exists("w:netrw_liststyle") && exists("w:netrw_treetop") && w:netrw_liststyle == 3)? w:netrw_treetop : './'))<cr>
    if s:didstarstar || !mapcheck("<s-down>","n")
     nnoremap <buffer> <silent> <s-down>	:Nexplore<cr>
    endif
@@ -6785,7 +6846,7 @@ fun! s:NetrwMarkFile(islocal,fname)
 
   " sanity check
   if empty(a:fname)
-"   call Dret("s:NetrwMarkFile : emtpy fname")
+"   call Dret("s:NetrwMarkFile : empty fname")
    return
   endif
   let curdir = s:NetrwGetCurdir(a:islocal)
@@ -8164,6 +8225,23 @@ fun! s:NetrwOpenFile(islocal)
   call inputsave()
   let fname= input("Enter filename: ")
   call inputrestore()
+"  call Decho("(s:NetrwOpenFile) fname<".fname.">",'~'.expand("<slnum>"))
+
+  " determine if Lexplore is in use
+  if exists("t:netrw_lexbufnr")
+   " check if t:netrw_lexbufnr refers to a netrw window
+"   call Decho("(s:netrwOpenFile) ..t:netrw_lexbufnr=".t:netrw_lexbufnr,'~'.expand("<slnum>"))
+   let lexwinnr = bufwinnr(t:netrw_lexbufnr)
+   if lexwinnr != -1 && exists("g:netrw_chgwin") && g:netrw_chgwin != -1
+"    call Decho("(s:netrwOpenFile) ..Lexplore in use",'~'.expand("<slnum>"))
+    exe "NetrwKeepj keepalt ".g:netrw_chgwin."wincmd w"
+    exe "NetrwKeepj e ".fnameescape(fname)
+    let @@= ykeep
+"    call Dret("s:NetrwOpenFile : creating a file with Lexplore mode")
+   endif
+  endif
+
+  " Does the filename contain a path?
   if fname !~ '[/\\]'
    if exists("b:netrw_curdir")
     if exists("g:netrw_quiet")
@@ -8502,6 +8580,7 @@ fun! s:NetrwPrevWinOpen(islocal)
   let lastwinnr = winnr("$")
   let curword   = s:NetrwGetWord()
   let choice    = 0
+  let s:prevwinopen= 1	" lets s:NetrwTreeDir() know that NetrwPrevWinOpen called it
   let s:treedir = s:NetrwTreeDir(a:islocal)
   let curdir    = s:treedir
 "  call Decho("winnr($)#".lastwinnr." curword<".curword.">",'~'.expand("<slnum>"))
@@ -8829,7 +8908,7 @@ fun! s:NetrwPreview(path) range
     "    0 :             1: top       -- preview window is horizontally split off and on the top
     "    0 :             0: bot       -- preview window is horizontally split off and on the bottom
     "
-    " Note that the file being previewed is already known to not be a directory, hence we can avoid doing a LocalBrowse() check via
+    " Note that the file being previewed is already known to not be a directory, hence we can avoid doing a LocalBrowseCheck() check via
     " the BufEnter event set up in netrwPlugin.vim
 "    call Decho("exe ".(g:netrw_alto? "top " : "bot ").(g:netrw_preview? "vert " : "")."pedit ".fnameescape(a:path),'~'.expand("<slnum>"))
     let eikeep = &ei
@@ -9264,14 +9343,20 @@ fun! s:NetrwTreeDir(islocal)
 "  call Decho("g:netrw_keepdir  =".(exists("g:netrw_keepdir")?   g:netrw_keepdir   : 'n/a'),'~'.expand("<slnum>"))
 "  call Decho("w:netrw_liststyle=".(exists("w:netrw_liststyle")? w:netrw_liststyle : 'n/a'),'~'.expand("<slnum>"))
 "  call Decho("w:netrw_treetop  =".(exists("w:netrw_treetop")?   w:netrw_treetop   : 'n/a'),'~'.expand("<slnum>"))
+"  call Decho("current line<".getline(".").">")
 
-  if exists("s:treedir")
+  if exists("s:treedir") && exists("s:prevwinopen")
    " s:NetrwPrevWinOpen opens a "previous" window -- and thus needs to and does call s:NetrwTreeDir early
+"   call Decho('s:NetrwPrevWinOpen opens a "previous" window -- and thus needs to and does call s:NetrwTreeDir early')
    let treedir= s:treedir
    unlet s:treedir
-"   call Dret("s:NetrwTreeDir ".treedir)
+   unlet s:prevwinopen
+"   call Dret("s:NetrwTreeDir ".treedir.": early return since s:treedir existed previously")
    return treedir
   endif
+  if exists("s:prevwinopen")
+   unlet s:prevwinopen
+  endif
 
   if !exists("b:netrw_curdir") || b:netrw_curdir == ""
    let b:netrw_curdir= getcwd()
@@ -9478,20 +9563,29 @@ endfun
 "                     Called by s:PerformListing()
 fun! s:NetrwTreeListing(dirname)
   if exists("w:netrw_liststyle") && w:netrw_liststyle == s:TREELIST
-"   call Dfunc("NetrwTreeListing() bufname<".expand("%").">")
+"   call Dfunc("s:NetrwTreeListing() bufname<".expand("%").">")
 "   call Decho("curdir<".a:dirname.">",'~'.expand("<slnum>"))
 "   call Decho("win#".winnr().": w:netrw_treetop ".(exists("w:netrw_treetop")? "exists" : "doesn't exist")." w:netrw_treedict ".(exists("w:netrw_treedict")? "exists" : "doesn't exit"),'~'.expand("<slnum>"))
 "   call Decho("g:netrw_banner=".g:netrw_banner.": banner ".(g:netrw_banner? "enabled" : "suppressed").": (line($)=".line("$")." byte2line(1)=".byte2line(1)." bannercnt=".w:netrw_bannercnt.")",'~'.expand("<slnum>"))
 
    " update the treetop
-"   call Decho("update the treetop",'~'.expand("<slnum>"))
    if !exists("w:netrw_treetop")
+"    call Decho("update the treetop  (w:netrw_treetop doesn't exist yet)",'~'.expand("<slnum>"))
     let w:netrw_treetop= a:dirname
+    let s:netrw_treetop= w:netrw_treetop
 "    call Decho("w:netrw_treetop<".w:netrw_treetop."> (reusing)",'~'.expand("<slnum>"))
    elseif (w:netrw_treetop =~ ('^'.a:dirname) && s:Strlen(a:dirname) < s:Strlen(w:netrw_treetop)) || a:dirname !~ ('^'.w:netrw_treetop)
+"    call Decho("update the treetop  (override w:netrw_treetop with a:dirname<".a:dirname.">)",'~'.expand("<slnum>"))
     let w:netrw_treetop= a:dirname
+    let s:netrw_treetop= w:netrw_treetop
 "    call Decho("w:netrw_treetop<".w:netrw_treetop."> (went up)",'~'.expand("<slnum>"))
    endif
+   if exists("w:netrw_treetop")
+    let s:netrw_treetop= w:netrw_treetop
+   else
+    let w:netrw_treetop= getcwd()
+    let s:netrw_treetop= w:netrw_treetop
+   endif
 
    if !exists("w:netrw_treedict")
     " insure that we have a treedict, albeit empty
@@ -9529,7 +9623,7 @@ fun! s:NetrwTreeListing(dirname)
 
    exe "setl ".g:netrw_bufsettings
 
-"   call Dret("NetrwTreeListing : bufname<".expand("%").">")
+"   call Dret("s:NetrwTreeListing : bufname<".expand("%").">")
    return
   endif
 endfun
@@ -9637,7 +9731,7 @@ fun! s:NetrwWideListing()
    let newcolstart = w:netrw_bannercnt + fpc
    let newcolend   = newcolstart + fpc - 1
 "   call Decho("bannercnt=".w:netrw_bannercnt." fpl=".w:netrw_fpl." fpc=".fpc." newcol[".newcolstart.",".newcolend."]",'~'.expand("<slnum>"))
-   if has("clipboard")
+   if has("clipboard") && g:netrw_clipboard
 "    call Decho("(s:NetrwWideListing) save @* and @+",'~'.expand("<slnum>"))
     sil! let keepregstar = @*
     sil! let keepregplus = @+
@@ -10683,7 +10777,7 @@ endfun
 " ---------------------------------------------------------------------
 " netrw#LocalBrowseCheck: {{{2
 fun! netrw#LocalBrowseCheck(dirname)
-  " This function is called by netrwPlugin.vim's s:LocalBrowse(), s:NetrwRexplore(),
+  " This function is called by netrwPlugin.vim's s:LocalBrowseCheck(), s:NetrwRexplore(),
   " and by <cr> when atop a listed file/directory (via a buffer-local map)
   "
   " unfortunate interaction -- split window debugging can't be used here, must use
@@ -10834,7 +10928,7 @@ endfun
 "  Hiding   a buffer means that it will be re-used   when examined, hence "fast".
 "                       (re-using a buffer may not be as accurate)
 "
-"  s:netrw_events : doesn't exist, s:LocalFastBrowser() will install autocmds whena med or fast browsing
+"  s:netrw_events : doesn't exist, s:LocalFastBrowser() will install autocmds with medium-speed or fast browsing
 "                   =1: autocmds installed, but ignore next FocusGained event to avoid initial double-refresh of listing.
 "                       BufEnter may be first event, then a FocusGained event.  Ignore the first FocusGained event.
 "                       If :Explore used: it sets s:netrw_events to 2, so no FocusGained events are ignored.
@@ -10996,13 +11090,14 @@ fun! s:LocalListing()
      let sz= s:NetrwHumanReadable(sz)
     endif
     let longfile= printf("%-".(g:netrw_maxfilenamelen+1)."s",pfile)
-    let pfile   = longfile.fsz." ".strftime(g:netrw_timefmt,getftime(filename))
+    let pfile   = longfile.sz." ".strftime(g:netrw_timefmt,getftime(filename))
 "    call Decho("longlist support: sz=".sz." fsz=".fsz,'~'.expand("<slnum>"))
    endif
 
    if     g:netrw_sort_by =~# "^t"
     " sort by time (handles time up to 1 quintillion seconds, US)
     " Decorate listing by prepending a timestamp/  .  Sorting will then be done based on time.
+"    call Decho("implementing g:netrw_sort_by=".g:netrw_sort_by." (time)")
 "    call Decho("getftime(".filename.")=".getftime(filename),'~'.expand("<slnum>"))
     let t  = getftime(filename)
     let ft = strpart("000000000000000000",1,18-strlen(t)).t
@@ -11012,6 +11107,7 @@ fun! s:LocalListing()
 
    elseif g:netrw_sort_by =~ "^s"
     " sort by size (handles file sizes up to 1 quintillion bytes, US)
+"    call Decho("implementing g:netrw_sort_by=".g:netrw_sort_by." (size)")
 "    call Decho("getfsize(".filename.")=".getfsize(filename),'~'.expand("<slnum>"))
     let sz   = getfsize(filename)
     if g:netrw_sizestyle =~# "[hH]"
@@ -11024,6 +11120,7 @@ fun! s:LocalListing()
 
    else
     " sort by name
+"    call Decho("implementing g:netrw_sort_by=".g:netrw_sort_by." (name)")
 "    call Decho("exe NetrwKeepj put ='".pfile."'",'~'.expand("<slnum>"))
     sil! NetrwKeepj put=pfile
    endif
@@ -11746,19 +11843,32 @@ endfun
 
 " ---------------------------------------------------------------------
 " s:NetrwCursor: responsible for setting cursorline/cursorcolumn based upon g:netrw_cursor {{{2
-fun! s:NetrwCursor()
+fun! s:NetrwCursor(editfile)
   if !exists("w:netrw_liststyle")
    let w:netrw_liststyle= g:netrw_liststyle
   endif
 "  call Dfunc("s:NetrwCursor() ft<".&ft."> liststyle=".w:netrw_liststyle." g:netrw_cursor=".g:netrw_cursor." s:netrw_usercuc=".s:netrw_usercuc." s:netrw_usercul=".s:netrw_usercul)
 
+"  call Decho("(s:NetrwCursor) COMBAK: cuc=".&l:cuc." cul=".&l:cul)
+
   if &ft != "netrw"
    " if the current window isn't a netrw directory listing window, then use user cursorline/column
    " settings.  Affects when netrw is used to read/write a file using scp/ftp/etc.
 "   call Decho("case ft!=netrw: use user cul,cuc",'~'.expand("<slnum>"))
-   let &l:cursorline   = s:netrw_usercul
-   let &l:cursorcolumn = s:netrw_usercuc
 
+  elseif g:netrw_cursor == 8
+   if w:netrw_liststyle == s:WIDELIST
+    setl cursorline
+    setl cursorcolumn
+   else
+    setl cursorline
+   endif
+  elseif g:netrw_cursor == 7
+    setl cursorline
+  elseif g:netrw_cursor == 6
+   if w:netrw_liststyle == s:WIDELIST
+    setl cursorline
+   endif
   elseif g:netrw_cursor == 4
    " all styles: cursorline, cursorcolumn
 "   call Decho("case g:netrw_cursor==4: setl cul cuc",'~'.expand("<slnum>"))
@@ -11775,26 +11885,22 @@ fun! s:NetrwCursor()
    else
 "    call Decho("case g:netrw_cursor==3 and not wide: setl cul (use user's cuc)",'~'.expand("<slnum>"))
     setl cursorline
-    let &l:cursorcolumn   = s:netrw_usercuc
    endif
 
   elseif g:netrw_cursor == 2
    " thin-long-tree: cursorline, user's cursorcolumn
    " wide          : cursorline, user's cursorcolumn
 "   call Decho("case g:netrw_cursor==2: setl cuc (use user's cul)",'~'.expand("<slnum>"))
-   let &l:cursorcolumn = s:netrw_usercuc
    setl cursorline
 
   elseif g:netrw_cursor == 1
    " thin-long-tree: user's cursorline, user's cursorcolumn
    " wide          : cursorline,        user's cursorcolumn
-   let &l:cursorcolumn = s:netrw_usercuc
    if w:netrw_liststyle == s:WIDELIST
 "    call Decho("case g:netrw_cursor==2 and wide: setl cul (use user's cuc)",'~'.expand("<slnum>"))
     setl cursorline
    else
 "    call Decho("case g:netrw_cursor==2 and not wide: (use user's cul,cuc)",'~'.expand("<slnum>"))
-    let &l:cursorline   = s:netrw_usercul
    endif
 
   else
@@ -11804,6 +11910,7 @@ fun! s:NetrwCursor()
    let &l:cursorcolumn = s:netrw_usercuc
   endif
 
+" call Decho("(s:NetrwCursor) COMBAK: cuc=".&l:cuc." cul=".&l:cul)
 "  call Dret("s:NetrwCursor : l:cursorline=".&l:cursorline." l:cursorcolumn=".&l:cursorcolumn)
 endfun
 
@@ -11817,6 +11924,7 @@ fun! s:RestoreCursorline()
   if exists("s:netrw_usercuc")
    let &l:cursorcolumn = s:netrw_usercuc
   endif
+"  call Decho("(s:RestoreCursorline) COMBAK: cuc=".&l:cuc." cul=".&l:cul)
 "  call Dret("s:RestoreCursorline : restored cul=".&l:cursorline." cuc=".&l:cursorcolumn)
 endfun
 
@@ -11851,12 +11959,38 @@ fun! s:NetrwDelete(path)
   return result
 endfun
 
+" ---------------------------------------------------------------------
+" s:NetrwBufRemover: removes a buffer that: {{{2s
+"                    has buffer-id > 1
+"                    is unlisted
+"                    is unnamed
+"                    does not appear in any window
+fun! s:NetrwBufRemover(bufid)
+"  call Dfunc("s:NetrwBufRemover(".a:bufid.")")
+"  call Decho("buf#".a:bufid."           ".((a:bufid > 1)? ">" : "≯")." must be >1 for removal","~".expand("<slnum>"))
+"  call Decho("buf#".a:bufid." is        ".(buflisted(a:bufid)? "listed" : "unlisted"),"~".expand("<slnum>"))
+"  call Decho("buf#".a:bufid." has name <".bufname(a:bufid).">","~".expand("<slnum>"))
+"  call Decho("buf#".a:bufid." has winid#".bufwinid(a:bufid),"~".expand("<slnum>"))
+
+  if a:bufid > 1 && !buflisted(a:bufid) && bufname(a:bufid) == "" && bufwinid(a:bufid) == -1
+"   call Decho("(s:NetrwBufRemover) removing buffer#".a:bufid,"~".expand("<slnum>"))
+   exe "bd! ".a:bufid
+  endif
+
+"  call Dret("s:NetrwBufRemover")
+endfun
+
 " ---------------------------------------------------------------------
 " s:NetrwEnew: opens a new buffer, passes netrw buffer variables through {{{2
 fun! s:NetrwEnew(...)
 "  call Dfunc("s:NetrwEnew() a:0=".a:0." win#".winnr()." winnr($)=".winnr("$")." bufnr($)=".bufnr("$")." expand(%)<".expand("%").">")
 "  call Decho("curdir<".((a:0>0)? a:1 : "")."> buf#".bufnr("%")."<".bufname("%").">",'~'.expand("<slnum>"))
 
+  " Clean out the last buffer: 
+  " Check if the last buffer has # > 1, is unlisted, is unnamed, and does not appear in a window
+  " If so, delete it.
+  call s:NetrwBufRemover(bufnr("$"))
+
   " grab a function-local-variable copy of buffer variables
 "  call Decho("make function-local copy of netrw variables",'~'.expand("<slnum>"))
   if exists("b:netrw_bannercnt")      |let netrw_bannercnt       = b:netrw_bannercnt      |endif

runtime/autoload/netrwSettings.vim

@@ -1,7 +1,7 @@
 " netrwSettings.vim: makes netrw settings simpler
-" Date:		Nov 09, 2016
+" Date:		Aug 12, 2021
 " Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
-" Version:	16
+" Version:	17	ASTRO-ONLY
 " Copyright:    Copyright (C) 1999-2007 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,
 "               with or without modifications, provided that this copyright
@@ -19,7 +19,7 @@
 if exists("g:loaded_netrwSettings") || &cp
   finish
 endif
-let g:loaded_netrwSettings = "v16"
+let g:loaded_netrwSettings = "v17"
 if v:version < 700
  echohl WarningMsg
  echo "***warning*** this version of netrwSettings needs vim 7.0"
@@ -31,7 +31,7 @@ endif
 " NetrwSettings: {{{1
 fun! netrwSettings#NetrwSettings()
   " this call is here largely just to insure that netrw has been loaded
-  call netrw#SavePosn()
+  call netrw#WinPath("")
   if !exists("g:loaded_netrw")
    echohl WarningMsg | echomsg "***sorry*** netrw needs to be loaded prior to using NetrwSettings" | echohl None
    return

runtime/autoload/phpcomplete.vim

@@ -9,7 +9,7 @@
 "
 "		let g:phpcomplete_relax_static_constraint = 1/0  [default 0]
 "			Enables completion for non-static methods when completing for static context (::).
-"			This generates E_STRICT level warning, but php calls these methods nontheless.
+"			This generates E_STRICT level warning, but php calls these methods nonetheless.
 "
 "		let g:phpcomplete_complete_for_unknown_classes = 1/0 [default 0]
 "			Enables completion of variables and functions in "everything under the sun" fashion
@@ -28,7 +28,7 @@
 "			This option controls the number of characters the user needs to type before
 "			the tags will be searched for namespaces and classes in typed out namespaces in
 "			"use ..." context. Setting this to 0 is not recommended because that means the code
-"			have to scan every tag, and vim's taglist() function runs extremly slow with a
+"			have to scan every tag, and vim's taglist() function runs extremely slow with a
 "			"match everything" pattern.
 "
 "		let g:phpcomplete_parse_docblock_comments = 1/0 [default 0]
@@ -263,7 +263,7 @@ function! phpcomplete#CompleteUse(base) " {{{
 				call add(no_namespace_matches, {'word': namespace_for_class.'\'.tag.name, 'kind': tag.kind, 'menu': tag.filename, 'info': tag.filename })
 			endif
 		endfor
-		" if it seems that the tags file have namespace informations we can safely throw
+		" if it seems that the tags file have namespace information we can safely throw
 		" away namespaceless tag matches since we can be sure they are invalid
 		if patched_ctags_detected
 			no_namespace_matches = []
@@ -805,7 +805,7 @@ function! phpcomplete#CompleteClassName(base, kinds, current_namespace, imports)
 		endif
 	endfor
 
-	" resolve the typed in part with namespaces (if theres a \ in it)
+	" resolve the typed in part with namespaces (if there's a \ in it)
 	let [tag_match_pattern, namespace_for_class] = phpcomplete#ExpandClassName(a:base, a:current_namespace, a:imports)
 
 	let tags = []
@@ -921,11 +921,11 @@ function! s:getNextCharWithPos(filelines, current_pos) " {{{
 endfunction " }}}
 
 function! phpcomplete#EvaluateModifiers(modifiers, required_modifiers, prohibited_modifiers) " {{{
-	" if theres no modifier, and no modifier is allowed and no modifier is required
+	" if there's no modifier, and no modifier is allowed and no modifier is required
 	if len(a:modifiers) == 0 && len(a:required_modifiers) == 0
 		return 1
 	else
-		" check if every requred modifier is present
+		" check if every required modifier is present
 		for required_modifier in a:required_modifiers
 			if index(a:modifiers, required_modifier) == -1
 				return 0
@@ -1253,7 +1253,7 @@ function! phpcomplete#GetCurrentInstruction(line_number, col_number, phpbegin) "
 				endif
 			endif
 
-			" save the coma position for later use if theres a "naked" , possibly separating a parameter and it is not in a parented part
+			" save the coma position for later use if there's a "naked" , possibly separating a parameter and it is not in a parented part
 			if first_coma_break_pos == -1 && current_char == ','
 				let first_coma_break_pos = len(instruction)
 			endif
@@ -1299,7 +1299,7 @@ function! phpcomplete#GetCurrentInstruction(line_number, col_number, phpbegin) "
 
 	" there were a "naked" coma in the instruction
 	if first_coma_break_pos != -1
-		if instruction !~? '^use' && instruction !~? '^class' " use ... statements and class delcarations should not be broken up by comas
+		if instruction !~? '^use' && instruction !~? '^class' " use ... statements and class declarations should not be broken up by comas
 			let pos = (-1 * first_coma_break_pos) + 1
 			let instruction = instruction[pos :]
 		endif
@@ -1311,7 +1311,7 @@ function! phpcomplete#GetCurrentInstruction(line_number, col_number, phpbegin) "
 		" clear everything up until the first (
 		let instruction = substitute(instruction, '^\(if\|while\|foreach\|for\)\s*(\s*', '', '')
 
-		" lets iterate trough the instruction until we can find the pair for the opening (
+		" lets iterate through the instruction until we can find the pair for the opening (
 		let i = 0
 		let depth = 1
 		while i < len(instruction)
@@ -1419,7 +1419,7 @@ function! phpcomplete#GetCallChainReturnType(classname_candidate, class_candidat
 						let parts = split(substitute(type, '^\\', '', ''), '\')
 						let class_candidate_namespace = join(parts[0:-2], '\')
 						let classname_candidate = parts[-1]
-						" check for renamed namepsace in imports
+						" check for renamed namespace in imports
 						if has_key(classstructure.imports, class_candidate_namespace)
 							let class_candidate_namespace = classstructure.imports[class_candidate_namespace].name
 						endif
@@ -2018,7 +2018,7 @@ function! phpcomplete#GetCachedClassContents(classlocation, class_name) " {{{
 			if getftime(classstructure.file) != classstructure.mtime
 				let valid = 0
 				" we could break here, but the time required for checking probably worth
-				" the the memory we can free by checking every file in the cached hirearchy
+				" the the memory we can free by checking every file in the cached hierarchy
 				call phpcomplete#ClearCachedClassContents(classstructure.file)
 			endif
 		endfor
@@ -2032,7 +2032,7 @@ function! phpcomplete#GetCachedClassContents(classlocation, class_name) " {{{
 			call remove(s:cache_classstructures, cache_key)
 			call phpcomplete#ClearCachedClassContents(full_file_path)
 
-			" fall trough for the read from files path
+			" fall through for the read from files path
 		endif
 	else
 		call phpcomplete#ClearCachedClassContents(full_file_path)
@@ -2141,7 +2141,7 @@ function! phpcomplete#GetClassContentsStructure(file_path, file_lines, class_nam
 			let l = lnum
 			let search_line = trait_line
 
-			" add lines from the file until theres no ';' in them
+			" add lines from the file until there's no ';' in them
 			while search_line !~? ';' && l > 0
 				" file lines are reversed so we need to go backwards
 				let l += 1
@@ -2573,7 +2573,7 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 				let search_line = line
 				let use_line = line
 
-				" add lines from the file until theres no ';' in them
+				" add lines from the file until there's no ';' in them
 				while search_line !~? ';' && l > 0
 					" file lines are reversed so we need to go backwards
 					let l -= 1
@@ -2605,7 +2605,7 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 			" find kind flags from tags or built in methods for the objects we extracted
 			" they can be either classes, interfaces or namespaces, no other thing is importable in php
 			for [key, import] in items(imports)
-				" if theres a \ in the name we have it's definitely not a built in thing, look for tags
+				" if there's a \ in the name we have it's definitely not a built in thing, look for tags
 				if import.name =~ '\\'
 					let patched_ctags_detected = 0
 					let [classname, namespace_for_classes] = phpcomplete#ExpandClassName(import.name, '\', {})
@@ -2662,10 +2662,10 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 						let import['kind'] = 'i'
 						let import['builtin'] = 1
 					else
-						" or can be a tag with exactly matchign name
+						" or can be a tag with exactly matching name
 						let tags = phpcomplete#GetTaglist('^'.import['name'].'$')
 						for tag in tags
-							" search for the first matchin namespace, class, interface with no namespace
+							" search for the first matching namespace, class, interface with no namespace
 							if !has_key(tag, 'namespace') && (tag.kind == 'n' || tag.kind == 'c' || tag.kind == 'i' || tag.kind == 't')
 								call extend(import, tag)
 								let import['builtin'] = 0
@@ -2883,7 +2883,7 @@ for [ext, data] in items(php_builtin['functions'])
 	call extend(g:php_builtin_functions, data)
 endfor
 
-" Built in classs
+" Built in class
 let g:php_builtin_classes = {}
 for [ext, data] in items(php_builtin['classes'])
 	call extend(g:php_builtin_classes, data)
@@ -2901,10 +2901,10 @@ for [ext, data] in items(php_builtin['constants'])
 	call extend(g:php_constants, data)
 endfor
 
-" When the classname not found or found but the tags dosen't contain that
-" class we will try to complate any method of any builtin class. To speed up
+" When the classname not found or found but the tags doesn't contain that
+" class we will try to complete any method of any builtin class. To speed up
 " that lookup we compile a 'ClassName::MethodName':'info' dictionary from the
-" builtin class informations
+" builtin class information
 let g:php_builtin_object_functions = {}
 
 " When completing for 'everyting imaginable' (no class context, not a

runtime/autoload/python3complete.vim

@@ -173,7 +173,7 @@ class Completer(object):
                 pass
         if len(arg_text) == 0:
             # The doc string sometimes contains the function signature
-            #  this works for alot of C modules that are part of the
+            #  this works for a lot of C modules that are part of the
             #  standard library
             doc = func_obj.__doc__
             if doc:

runtime/autoload/pythoncomplete.vim

@@ -191,7 +191,7 @@ class Completer(object):
                 pass
         if len(arg_text) == 0:
             # The doc string sometimes contains the function signature
-            #  this works for alot of C modules that are part of the
+            #  this works for a lot of C modules that are part of the
             #  standard library
             doc = func_obj.__doc__
             if doc:

runtime/autoload/sqlcomplete.vim

@@ -17,7 +17,7 @@
 "       and complete it.
 "
 " Version 16.0 (Dec 2015)
-"     - NF: If reseting the cache and table, procedure or view completion
+"     - NF: If resetting the cache and table, procedure or view completion
 "           had been used via dbext, have dbext delete or recreate the 
 "           dictionary so that new objects are picked up for the 
 "           next completion.
@@ -554,7 +554,7 @@ function! sqlcomplete#PreCacheSyntax(...)
         let syn_group_arr = g:omni_sql_precache_syntax_groups
     endif
     " For each group specified in the list, precache all
-    " the sytnax items.
+    " the syntax items.
     if !empty(syn_group_arr)
         for group_name in syn_group_arr
             let syn_items = extend( syn_items, s:SQLCGetSyntaxList(group_name) )
@@ -577,7 +577,7 @@ function! sqlcomplete#ResetCacheSyntax(...)
         let syn_group_arr = g:omni_sql_precache_syntax_groups
     endif
     " For each group specified in the list, precache all
-    " the sytnax items.
+    " the syntax items.
     if !empty(syn_group_arr)
         for group_name in syn_group_arr
             let list_idx = index(s:syn_list, group_name, 0, &ignorecase)
@@ -617,7 +617,7 @@ function! sqlcomplete#DrillIntoTable()
     else
 	" If the popup is not visible, simple perform the normal
 	" key behaviour.
-	" Must use exec since they key must be preceeded by "\"
+	" Must use exec since the key must be preceded by "\"
 	" or feedkeys will simply push each character of the string
 	" rather than the "key press".
         exec 'call feedkeys("\'.g:ftplugin_sql_omni_key_right.'", "n")'
@@ -634,7 +634,7 @@ function! sqlcomplete#DrillOutOfColumns()
     else
 	" If the popup is not visible, simple perform the normal
 	" key behaviour.
-	" Must use exec since they key must be preceeded by "\"
+	" Must use exec since the key must be preceded by "\"
 	" or feedkeys will simply push each character of the string
 	" rather than the "key press".
         exec 'call feedkeys("\'.g:ftplugin_sql_omni_key_left.'", "n")'
@@ -843,7 +843,7 @@ function! s:SQLCGetColumns(table_name, list_type)
          let curline    = line(".")
          let curcol     = col(".")
 
-         " Do not let searchs wrap
+         " Do not let searches wrap
          setlocal nowrapscan
          " If . was entered, look at the word just before the .
          " We are looking for something like this:
@@ -863,7 +863,7 @@ function! s:SQLCGetColumns(table_name, list_type)
          " Search forward until one of the following:
          "     1.  Another select/update/delete statement
          "     2.  A ; at the end of a line (the delimiter)
-         "     3.  The end of the file (incase no delimiter)
+         "     3.  The end of the file (in case no delimiter)
          " Yank the visually selected text into the "y register.
          exec 'silent! normal! vl/\c\(\<select\>\|\<update\>\|\<delete\>\|;\s*$\|\%$\)'."\n".'"yy'
 

runtime/autoload/tar.vim

@@ -778,7 +778,7 @@ fun! tar#Vimuntar(...)
    elseif executable("gzip")
     silent exe "!gzip -d ".shellescape(tartail)
    else
-    echoerr "unable to decompress<".tartail."> on this sytem"
+    echoerr "unable to decompress<".tartail."> on this system"
     if simplify(curdir) != simplify(tarhome)
      " remove decompressed tarball, restore directory
 "     call Decho("delete(".tartail.".tar)")

runtime/autoload/tohtml.vim

@@ -693,7 +693,7 @@ func! tohtml#GetUserSettings() "{{{
     let user_settings = {}
 
     " Define the correct option if the old option name exists and we haven't
-    " already defined the correct one. Maybe I'll put out a warnig message about
+    " already defined the correct one. Maybe I'll put out a warning message about
     " this sometime and remove the old option entirely at some even later time,
     " but for now just silently accept the old option.
     if exists('g:use_xhtml') && !exists("g:html_use_xhtml")

runtime/autoload/xmlcomplete.vim

@@ -199,7 +199,7 @@ function! xmlcomplete#CompleteTags(findstart, base)
 	" 1. Events attributes
 	if context =~ '\s'
 
-		" If attr contains =\s*[\"'] we catched value of attribute
+		" If attr contains =\s*[\"'] we catch value of attribute
 		if attr =~ "=\s*[\"']" || attr =~ "=\s*$"
 			" Let do attribute specific completion
 			let attrname = matchstr(attr, '.*\ze\s*=')

runtime/autoload/zip.vim

@@ -81,7 +81,7 @@ fun! zip#Browse(zipfile)
   " sanity checks
   if !exists("*fnameescape")
    if &verbose > 1
-    echoerr "the zip plugin is not available (your vim doens't support fnameescape())"
+    echoerr "the zip plugin is not available (your vim doesn't support fnameescape())"
    endif
    return
   endif

runtime/colors/README.txt

@@ -87,4 +87,5 @@ please check the following items:
 - In the GUI, is it easy to find the cursor, also in a file with lots of
   syntax highlighting?
 - Do not use hard coded escape sequences, these will not work in other
-  terminals.  Always use color names or #RRGGBB for the GUI.
+  terminals.  Always use color names or #RRGGBB for the GUI. See v:colornames
+  for details on how to define your own color names.

runtime/colors/lists/csscolors.vim

@@ -0,0 +1,166 @@
+" Maintainer:  Drew Vogel <dvogel@sidejump.org>
+" Last Change: 2021 Jul 25
+
+" Similar in spirit to rgb.txt, this plugin establishes a human-friendly name
+" for every color listed in the CSS standard:
+"
+" https://www.w3.org/TR/css-color-3/
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+call extend(v:colornames, {
+			\ 'css_black': '#000000',
+			\ 'css_silver': '#c0c0c0',
+			\ 'css_gray': '#808080',
+			\ 'css_white': '#FFFFFF',
+			\ 'css_maroon': '#800000',
+			\ 'css_red': '#FF0000',
+			\ 'css_purple': '#800080',
+			\ 'css_fuchsia': '#FF00FF',
+			\ 'css_green': '#008000',
+			\ 'css_lime': '#00FF00',
+			\ 'css_olive': '#808000',
+			\ 'css_yellow': '#FFFF00',
+			\ 'css_navy': '#000080',
+			\ 'css_blue': '#0000FF',
+			\ 'css_teal': '#008080',
+			\ 'css_aqua': '#00FFFF',
+			\
+			\ 'css_aliceblue': '#f0f8ff',
+			\ 'css_antiquewhite': '#faebd7',
+			\ 'css_aquamarine': '#7fffd4',
+			\ 'css_azure': '#f0ffff',
+			\ 'css_beige': '#f5f5dc',
+			\ 'css_bisque': '#ffe4c4',
+			\ 'css_blanchedalmond': '#ffebcd',
+			\ 'css_blueviolet': '#8a2be2',
+			\ 'css_brown': '#a52a2a',
+			\ 'css_burlywood': '#deb887',
+			\ 'css_cadetblue': '#5f9ea0',
+			\ 'css_chartreuse': '#7fff00',
+			\ 'css_chocolate': '#d2691e',
+			\ 'css_coral': '#ff7f50',
+			\ 'css_cornflowerblue': '#6495ed',
+			\ 'css_cornsilk': '#fff8dc',
+			\ 'css_crimson': '#dc143c',
+			\ 'css_cyan': '#00ffff',
+			\ 'css_darkblue': '#00008b',
+			\ 'css_darkcyan': '#008b8b',
+			\ 'css_darkgoldenrod': '#b8860b',
+			\ 'css_darkgray': '#a9a9a9',
+			\ 'css_darkgreen': '#006400',
+			\ 'css_darkgrey': '#a9a9a9',
+			\ 'css_darkkhaki': '#bdb76b',
+			\ 'css_darkmagenta': '#8b008b',
+			\ 'css_darkolivegreen': '#556b2f',
+			\ 'css_darkorange': '#ff8c00',
+			\ 'css_darkorchid': '#9932cc',
+			\ 'css_darkred': '#8b0000',
+			\ 'css_darksalmon': '#e9967a',
+			\ 'css_darkseagreen': '#8fbc8f',
+			\ 'css_darkslateblue': '#483d8b',
+			\ 'css_darkslategray': '#2f4f4f',
+			\ 'css_darkslategrey': '#2f4f4f',
+			\ 'css_darkturquoise': '#00ced1',
+			\ 'css_darkviolet': '#9400d3',
+			\ 'css_deeppink': '#ff1493',
+			\ 'css_deepskyblue': '#00bfff',
+			\ 'css_dimgray': '#696969',
+			\ 'css_dimgrey': '#696969',
+			\ 'css_dodgerblue': '#1e90ff',
+			\ 'css_firebrick': '#b22222',
+			\ 'css_floralwhite': '#fffaf0',
+			\ 'css_forestgreen': '#228b22',
+			\ 'css_gainsboro': '#dcdcdc',
+			\ 'css_ghostwhite': '#f8f8ff',
+			\ 'css_gold': '#ffd700',
+			\ 'css_goldenrod': '#daa520',
+			\ 'css_greenyellow': '#adff2f',
+			\ 'css_grey': '#808080',
+			\ 'css_honeydew': '#f0fff0',
+			\ 'css_hotpink': '#ff69b4',
+			\ 'css_indianred': '#cd5c5c',
+			\ 'css_indigo': '#4b0082',
+			\ 'css_ivory': '#fffff0',
+			\ 'css_khaki': '#f0e68c',
+			\ 'css_lavender': '#e6e6fa',
+			\ 'css_lavenderblush': '#fff0f5',
+			\ 'css_lawngreen': '#7cfc00',
+			\ 'css_lemonchiffon': '#fffacd',
+			\ 'css_lightblue': '#add8e6',
+			\ 'css_lightcoral': '#f08080',
+			\ 'css_lightcyan': '#e0ffff',
+			\ 'css_lightgoldenrodyellow': '#fafad2',
+			\ 'css_lightgray': '#d3d3d3',
+			\ 'css_lightgreen': '#90ee90',
+			\ 'css_lightgrey': '#d3d3d3',
+			\ 'css_lightpink': '#ffb6c1',
+			\ 'css_lightsalmon': '#ffa07a',
+			\ 'css_lightseagreen': '#20b2aa',
+			\ 'css_lightskyblue': '#87cefa',
+			\ 'css_lightslategray': '#778899',
+			\ 'css_lightslategrey': '#778899',
+			\ 'css_lightsteelblue': '#b0c4de',
+			\ 'css_lightyellow': '#ffffe0',
+			\ 'css_limegreen': '#32cd32',
+			\ 'css_linen': '#faf0e6',
+			\ 'css_magenta': '#ff00ff',
+			\ 'css_mediumaquamarine': '#66cdaa',
+			\ 'css_mediumblue': '#0000cd',
+			\ 'css_mediumorchid': '#ba55d3',
+			\ 'css_mediumpurple': '#9370db',
+			\ 'css_mediumseagreen': '#3cb371',
+			\ 'css_mediumslateblue': '#7b68ee',
+			\ 'css_mediumspringgreen': '#00fa9a',
+			\ 'css_mediumturquoise': '#48d1cc',
+			\ 'css_mediumvioletred': '#c71585',
+			\ 'css_midnightblue': '#191970',
+			\ 'css_mintcream': '#f5fffa',
+			\ 'css_mistyrose': '#ffe4e1',
+			\ 'css_moccasin': '#ffe4b5',
+			\ 'css_navajowhite': '#ffdead',
+			\ 'css_oldlace': '#fdf5e6',
+			\ 'css_olivedrab': '#6b8e23',
+			\ 'css_orange': '#ffa500',
+			\ 'css_orangered': '#ff4500',
+			\ 'css_orchid': '#da70d6',
+			\ 'css_palegoldenrod': '#eee8aa',
+			\ 'css_palegreen': '#98fb98',
+			\ 'css_paleturquoise': '#afeeee',
+			\ 'css_palevioletred': '#db7093',
+			\ 'css_papayawhip': '#ffefd5',
+			\ 'css_peachpuff': '#ffdab9',
+			\ 'css_peru': '#cd853f',
+			\ 'css_pink': '#ffc0cb',
+			\ 'css_plum': '#dda0dd',
+			\ 'css_powderblue': '#b0e0e6',
+			\ 'css_rosybrown': '#bc8f8f',
+			\ 'css_royalblue': '#4169e1',
+			\ 'css_saddlebrown': '#8b4513',
+			\ 'css_salmon': '#fa8072',
+			\ 'css_sandybrown': '#f4a460',
+			\ 'css_seagreen': '#2e8b57',
+			\ 'css_seashell': '#fff5ee',
+			\ 'css_sienna': '#a0522d',
+			\ 'css_skyblue': '#87ceeb',
+			\ 'css_slateblue': '#6a5acd',
+			\ 'css_slategray': '#708090',
+			\ 'css_slategrey': '#708090',
+			\ 'css_snow': '#fffafa',
+			\ 'css_springgreen': '#00ff7f',
+			\ 'css_steelblue': '#4682b4',
+			\ 'css_tan': '#d2b48c',
+			\ 'css_thistle': '#d8bfd8',
+			\ 'css_tomato': '#ff6347',
+			\ 'css_turquoise': '#40e0d0',
+			\ 'css_violet': '#ee82ee',
+			\ 'css_wheat': '#f5deb3',
+			\ 'css_whitesmoke': '#f5f5f5',
+			\ 'css_yellowgreen': '#9acd32',
+			\ }, 'keep')
+
+let &cpo= s:keepcpo
+unlet s:keepcpo
+
+"vim: sw=4

runtime/colors/lists/default.vim

@@ -0,0 +1,801 @@
+" Maintainer:  Drew Vogel <dvogel@sidejump.org>
+" Last Change: 2021 Jul 25
+"
+" Replaced rgb.txt as the source of de facto standard color names. This is
+" sourced each time the colorscheme command is run. It is also sourced each
+" time the highlight command fails to recognize a gui color. You can override
+" these colors by introducing a new colors/lists/default.vim file earlier in
+" the runtimepath.
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+call extend(v:colornames, {
+			\ 'snow': '#fffafa',
+			\ 'ghost white': '#f8f8ff',
+			\ 'ghostwhite': '#f8f8ff',
+			\ 'white smoke': '#f5f5f5',
+			\ 'whitesmoke': '#f5f5f5',
+			\ 'gainsboro': '#dcdcdc',
+			\ 'floral white': '#fffaf0',
+			\ 'floralwhite': '#fffaf0',
+			\ 'old lace': '#fdf5e6',
+			\ 'oldlace': '#fdf5e6',
+			\ 'linen': '#faf0e6',
+			\ 'antique white': '#faebd7',
+			\ 'antiquewhite': '#faebd7',
+			\ 'papaya whip': '#ffefd5',
+			\ 'papayawhip': '#ffefd5',
+			\ 'blanched almond': '#ffebcd',
+			\ 'blanchedalmond': '#ffebcd',
+			\ 'bisque': '#ffe4c4',
+			\ 'peach puff': '#ffdab9',
+			\ 'peachpuff': '#ffdab9',
+			\ 'navajo white': '#ffdead',
+			\ 'navajowhite': '#ffdead',
+			\ 'moccasin': '#ffe4b5',
+			\ 'cornsilk': '#fff8dc',
+			\ 'ivory': '#fffff0',
+			\ 'lemon chiffon': '#fffacd',
+			\ 'lemonchiffon': '#fffacd',
+			\ 'seashell': '#fff5ee',
+			\ 'honeydew': '#f0fff0',
+			\ 'mint cream': '#f5fffa',
+			\ 'mintcream': '#f5fffa',
+			\ 'azure': '#f0ffff',
+			\ 'alice blue': '#f0f8ff',
+			\ 'aliceblue': '#f0f8ff',
+			\ 'lavender': '#e6e6fa',
+			\ 'lavender blush': '#fff0f5',
+			\ 'lavenderblush': '#fff0f5',
+			\ 'misty rose': '#ffe4e1',
+			\ 'mistyrose': '#ffe4e1',
+			\ 'white': '#ffffff',
+			\ 'black': '#000000',
+			\ 'dark slate gray': '#2f4f4f',
+			\ 'darkslategray': '#2f4f4f',
+			\ 'dark slate grey': '#2f4f4f',
+			\ 'darkslategrey': '#2f4f4f',
+			\ 'dim gray': '#696969',
+			\ 'dimgray': '#696969',
+			\ 'dim grey': '#696969',
+			\ 'dimgrey': '#696969',
+			\ 'slate gray': '#708090',
+			\ 'slategray': '#708090',
+			\ 'slate grey': '#708090',
+			\ 'slategrey': '#708090',
+			\ 'light slate gray': '#778899',
+			\ 'lightslategray': '#778899',
+			\ 'light slate grey': '#778899',
+			\ 'lightslategrey': '#778899',
+			\ 'gray': '#bebebe',
+			\ 'grey': '#bebebe',
+			\ 'x11 gray': '#bebebe',
+			\ 'x11gray': '#bebebe',
+			\ 'x11 grey': '#bebebe',
+			\ 'x11grey': '#bebebe',
+			\ 'web gray': '#808080',
+			\ 'webgray': '#808080',
+			\ 'web grey': '#808080',
+			\ 'webgrey': '#808080',
+			\ 'light grey': '#d3d3d3',
+			\ 'lightgrey': '#d3d3d3',
+			\ 'light gray': '#d3d3d3',
+			\ 'lightgray': '#d3d3d3',
+			\ 'midnight blue': '#191970',
+			\ 'midnightblue': '#191970',
+			\ 'navy': '#000080',
+			\ 'navy blue': '#000080',
+			\ 'navyblue': '#000080',
+			\ 'cornflower blue': '#6495ed',
+			\ 'cornflowerblue': '#6495ed',
+			\ 'dark slate blue': '#483d8b',
+			\ 'darkslateblue': '#483d8b',
+			\ 'slate blue': '#6a5acd',
+			\ 'slateblue': '#6a5acd',
+			\ 'medium slate blue': '#7b68ee',
+			\ 'mediumslateblue': '#7b68ee',
+			\ 'light slate blue': '#8470ff',
+			\ 'lightslateblue': '#8470ff',
+			\ 'medium blue': '#0000cd',
+			\ 'mediumblue': '#0000cd',
+			\ 'royal blue': '#4169e1',
+			\ 'royalblue': '#4169e1',
+			\ 'blue': '#0000ff',
+			\ 'dodger blue': '#1e90ff',
+			\ 'dodgerblue': '#1e90ff',
+			\ 'deep sky blue': '#00bfff',
+			\ 'deepskyblue': '#00bfff',
+			\ 'sky blue': '#87ceeb',
+			\ 'skyblue': '#87ceeb',
+			\ 'light sky blue': '#87cefa',
+			\ 'lightskyblue': '#87cefa',
+			\ 'steel blue': '#4682b4',
+			\ 'steelblue': '#4682b4',
+			\ 'light steel blue': '#b0c4de',
+			\ 'lightsteelblue': '#b0c4de',
+			\ 'light blue': '#add8e6',
+			\ 'lightblue': '#add8e6',
+			\ 'powder blue': '#b0e0e6',
+			\ 'powderblue': '#b0e0e6',
+			\ 'pale turquoise': '#afeeee',
+			\ 'paleturquoise': '#afeeee',
+			\ 'dark turquoise': '#00ced1',
+			\ 'darkturquoise': '#00ced1',
+			\ 'medium turquoise': '#48d1cc',
+			\ 'mediumturquoise': '#48d1cc',
+			\ 'turquoise': '#40e0d0',
+			\ 'cyan': '#00ffff',
+			\ 'aqua': '#00ffff',
+			\ 'light cyan': '#e0ffff',
+			\ 'lightcyan': '#e0ffff',
+			\ 'cadet blue': '#5f9ea0',
+			\ 'cadetblue': '#5f9ea0',
+			\ 'medium aquamarine': '#66cdaa',
+			\ 'mediumaquamarine': '#66cdaa',
+			\ 'aquamarine': '#7fffd4',
+			\ 'dark green': '#006400',
+			\ 'darkgreen': '#006400',
+			\ 'dark olive green': '#556b2f',
+			\ 'darkolivegreen': '#556b2f',
+			\ 'dark sea green': '#8fbc8f',
+			\ 'darkseagreen': '#8fbc8f',
+			\ 'sea green': '#2e8b57',
+			\ 'seagreen': '#2e8b57',
+			\ 'medium sea green': '#3cb371',
+			\ 'mediumseagreen': '#3cb371',
+			\ 'light sea green': '#20b2aa',
+			\ 'lightseagreen': '#20b2aa',
+			\ 'pale green': '#98fb98',
+			\ 'palegreen': '#98fb98',
+			\ 'spring green': '#00ff7f',
+			\ 'springgreen': '#00ff7f',
+			\ 'lawn green': '#7cfc00',
+			\ 'lawngreen': '#7cfc00',
+			\ 'green': '#00ff00',
+			\ 'lime': '#00ff00',
+			\ 'x11 green': '#00ff00',
+			\ 'x11green': '#00ff00',
+			\ 'web green': '#008000',
+			\ 'webgreen': '#008000',
+			\ 'chartreuse': '#7fff00',
+			\ 'medium spring green': '#00fa9a',
+			\ 'mediumspringgreen': '#00fa9a',
+			\ 'green yellow': '#adff2f',
+			\ 'greenyellow': '#adff2f',
+			\ 'lime green': '#32cd32',
+			\ 'limegreen': '#32cd32',
+			\ 'yellow green': '#9acd32',
+			\ 'yellowgreen': '#9acd32',
+			\ 'forest green': '#228b22',
+			\ 'forestgreen': '#228b22',
+			\ 'olive drab': '#6b8e23',
+			\ 'olivedrab': '#6b8e23',
+			\ 'dark khaki': '#bdb76b',
+			\ 'darkkhaki': '#bdb76b',
+			\ 'khaki': '#f0e68c',
+			\ 'pale goldenrod': '#eee8aa',
+			\ 'palegoldenrod': '#eee8aa',
+			\ 'light goldenrod yellow': '#fafad2',
+			\ 'lightgoldenrodyellow': '#fafad2',
+			\ 'light yellow': '#ffffe0',
+			\ 'lightyellow': '#ffffe0',
+			\ 'yellow': '#ffff00',
+			\ 'gold': '#ffd700',
+			\ 'light goldenrod': '#eedd82',
+			\ 'lightgoldenrod': '#eedd82',
+			\ 'goldenrod': '#daa520',
+			\ 'dark goldenrod': '#b8860b',
+			\ 'darkgoldenrod': '#b8860b',
+			\ 'rosy brown': '#bc8f8f',
+			\ 'rosybrown': '#bc8f8f',
+			\ 'indian red': '#cd5c5c',
+			\ 'indianred': '#cd5c5c',
+			\ 'saddle brown': '#8b4513',
+			\ 'saddlebrown': '#8b4513',
+			\ 'sienna': '#a0522d',
+			\ 'peru': '#cd853f',
+			\ 'burlywood': '#deb887',
+			\ 'beige': '#f5f5dc',
+			\ 'wheat': '#f5deb3',
+			\ 'sandy brown': '#f4a460',
+			\ 'sandybrown': '#f4a460',
+			\ 'tan': '#d2b48c',
+			\ 'chocolate': '#d2691e',
+			\ 'firebrick': '#b22222',
+			\ 'brown': '#a52a2a',
+			\ 'dark salmon': '#e9967a',
+			\ 'darksalmon': '#e9967a',
+			\ 'salmon': '#fa8072',
+			\ 'light salmon': '#ffa07a',
+			\ 'lightsalmon': '#ffa07a',
+			\ 'orange': '#ffa500',
+			\ 'dark orange': '#ff8c00',
+			\ 'darkorange': '#ff8c00',
+			\ 'coral': '#ff7f50',
+			\ 'light coral': '#f08080',
+			\ 'lightcoral': '#f08080',
+			\ 'tomato': '#ff6347',
+			\ 'orange red': '#ff4500',
+			\ 'orangered': '#ff4500',
+			\ 'red': '#ff0000',
+			\ 'hot pink': '#ff69b4',
+			\ 'hotpink': '#ff69b4',
+			\ 'deep pink': '#ff1493',
+			\ 'deeppink': '#ff1493',
+			\ 'pink': '#ffc0cb',
+			\ 'light pink': '#ffb6c1',
+			\ 'lightpink': '#ffb6c1',
+			\ 'pale violet red': '#db7093',
+			\ 'palevioletred': '#db7093',
+			\ 'maroon': '#b03060',
+			\ 'x11 maroon': '#b03060',
+			\ 'x11maroon': '#b03060',
+			\ 'web maroon': '#800000',
+			\ 'webmaroon': '#800000',
+			\ 'medium violet red': '#c71585',
+			\ 'mediumvioletred': '#c71585',
+			\ 'violet red': '#d02090',
+			\ 'violetred': '#d02090',
+			\ 'magenta': '#ff00ff',
+			\ 'fuchsia': '#ff00ff',
+			\ 'violet': '#ee82ee',
+			\ 'plum': '#dda0dd',
+			\ 'orchid': '#da70d6',
+			\ 'medium orchid': '#ba55d3',
+			\ 'mediumorchid': '#ba55d3',
+			\ 'dark orchid': '#9932cc',
+			\ 'darkorchid': '#9932cc',
+			\ 'dark violet': '#9400d3',
+			\ 'darkviolet': '#9400d3',
+			\ 'blue violet': '#8a2be2',
+			\ 'blueviolet': '#8a2be2',
+			\ 'purple': '#a020f0',
+			\ 'x11 purple': '#a020f0',
+			\ 'x11purple': '#a020f0',
+			\ 'web purple': '#800080',
+			\ 'webpurple': '#800080',
+			\ 'medium purple': '#9370db',
+			\ 'mediumpurple': '#9370db',
+			\ 'thistle': '#d8bfd8',
+			\ 'snow1': '#fffafa',
+			\ 'snow2': '#eee9e9',
+			\ 'snow3': '#cdc9c9',
+			\ 'snow4': '#8b8989',
+			\ 'seashell1': '#fff5ee',
+			\ 'seashell2': '#eee5de',
+			\ 'seashell3': '#cdc5bf',
+			\ 'seashell4': '#8b8682',
+			\ 'antiquewhite1': '#ffefdb',
+			\ 'antiquewhite2': '#eedfcc',
+			\ 'antiquewhite3': '#cdc0b0',
+			\ 'antiquewhite4': '#8b8378',
+			\ 'bisque1': '#ffe4c4',
+			\ 'bisque2': '#eed5b7',
+			\ 'bisque3': '#cdb79e',
+			\ 'bisque4': '#8b7d6b',
+			\ 'peachpuff1': '#ffdab9',
+			\ 'peachpuff2': '#eecbad',
+			\ 'peachpuff3': '#cdaf95',
+			\ 'peachpuff4': '#8b7765',
+			\ 'navajowhite1': '#ffdead',
+			\ 'navajowhite2': '#eecfa1',
+			\ 'navajowhite3': '#cdb38b',
+			\ 'navajowhite4': '#8b795e',
+			\ 'lemonchiffon1': '#fffacd',
+			\ 'lemonchiffon2': '#eee9bf',
+			\ 'lemonchiffon3': '#cdc9a5',
+			\ 'lemonchiffon4': '#8b8970',
+			\ 'cornsilk1': '#fff8dc',
+			\ 'cornsilk2': '#eee8cd',
+			\ 'cornsilk3': '#cdc8b1',
+			\ 'cornsilk4': '#8b8878',
+			\ 'ivory1': '#fffff0',
+			\ 'ivory2': '#eeeee0',
+			\ 'ivory3': '#cdcdc1',
+			\ 'ivory4': '#8b8b83',
+			\ 'honeydew1': '#f0fff0',
+			\ 'honeydew2': '#e0eee0',
+			\ 'honeydew3': '#c1cdc1',
+			\ 'honeydew4': '#838b83',
+			\ 'lavenderblush1': '#fff0f5',
+			\ 'lavenderblush2': '#eee0e5',
+			\ 'lavenderblush3': '#cdc1c5',
+			\ 'lavenderblush4': '#8b8386',
+			\ 'mistyrose1': '#ffe4e1',
+			\ 'mistyrose2': '#eed5d2',
+			\ 'mistyrose3': '#cdb7b5',
+			\ 'mistyrose4': '#8b7d7b',
+			\ 'azure1': '#f0ffff',
+			\ 'azure2': '#e0eeee',
+			\ 'azure3': '#c1cdcd',
+			\ 'azure4': '#838b8b',
+			\ 'slateblue1': '#836fff',
+			\ 'slateblue2': '#7a67ee',
+			\ 'slateblue3': '#6959cd',
+			\ 'slateblue4': '#473c8b',
+			\ 'royalblue1': '#4876ff',
+			\ 'royalblue2': '#436eee',
+			\ 'royalblue3': '#3a5fcd',
+			\ 'royalblue4': '#27408b',
+			\ 'blue1': '#0000ff',
+			\ 'blue2': '#0000ee',
+			\ 'blue3': '#0000cd',
+			\ 'blue4': '#00008b',
+			\ 'dodgerblue1': '#1e90ff',
+			\ 'dodgerblue2': '#1c86ee',
+			\ 'dodgerblue3': '#1874cd',
+			\ 'dodgerblue4': '#104e8b',
+			\ 'steelblue1': '#63b8ff',
+			\ 'steelblue2': '#5cacee',
+			\ 'steelblue3': '#4f94cd',
+			\ 'steelblue4': '#36648b',
+			\ 'deepskyblue1': '#00bfff',
+			\ 'deepskyblue2': '#00b2ee',
+			\ 'deepskyblue3': '#009acd',
+			\ 'deepskyblue4': '#00688b',
+			\ 'skyblue1': '#87ceff',
+			\ 'skyblue2': '#7ec0ee',
+			\ 'skyblue3': '#6ca6cd',
+			\ 'skyblue4': '#4a708b',
+			\ 'lightskyblue1': '#b0e2ff',
+			\ 'lightskyblue2': '#a4d3ee',
+			\ 'lightskyblue3': '#8db6cd',
+			\ 'lightskyblue4': '#607b8b',
+			\ 'slategray1': '#c6e2ff',
+			\ 'slategray2': '#b9d3ee',
+			\ 'slategray3': '#9fb6cd',
+			\ 'slategray4': '#6c7b8b',
+			\ 'lightsteelblue1': '#cae1ff',
+			\ 'lightsteelblue2': '#bcd2ee',
+			\ 'lightsteelblue3': '#a2b5cd',
+			\ 'lightsteelblue4': '#6e7b8b',
+			\ 'lightblue1': '#bfefff',
+			\ 'lightblue2': '#b2dfee',
+			\ 'lightblue3': '#9ac0cd',
+			\ 'lightblue4': '#68838b',
+			\ 'lightcyan1': '#e0ffff',
+			\ 'lightcyan2': '#d1eeee',
+			\ 'lightcyan3': '#b4cdcd',
+			\ 'lightcyan4': '#7a8b8b',
+			\ 'paleturquoise1': '#bbffff',
+			\ 'paleturquoise2': '#aeeeee',
+			\ 'paleturquoise3': '#96cdcd',
+			\ 'paleturquoise4': '#668b8b',
+			\ 'cadetblue1': '#98f5ff',
+			\ 'cadetblue2': '#8ee5ee',
+			\ 'cadetblue3': '#7ac5cd',
+			\ 'cadetblue4': '#53868b',
+			\ 'turquoise1': '#00f5ff',
+			\ 'turquoise2': '#00e5ee',
+			\ 'turquoise3': '#00c5cd',
+			\ 'turquoise4': '#00868b',
+			\ 'cyan1': '#00ffff',
+			\ 'cyan2': '#00eeee',
+			\ 'cyan3': '#00cdcd',
+			\ 'cyan4': '#008b8b',
+			\ 'darkslategray1': '#97ffff',
+			\ 'darkslategray2': '#8deeee',
+			\ 'darkslategray3': '#79cdcd',
+			\ 'darkslategray4': '#528b8b',
+			\ 'aquamarine1': '#7fffd4',
+			\ 'aquamarine2': '#76eec6',
+			\ 'aquamarine3': '#66cdaa',
+			\ 'aquamarine4': '#458b74',
+			\ 'darkseagreen1': '#c1ffc1',
+			\ 'darkseagreen2': '#b4eeb4',
+			\ 'darkseagreen3': '#9bcd9b',
+			\ 'darkseagreen4': '#698b69',
+			\ 'seagreen1': '#54ff9f',
+			\ 'seagreen2': '#4eee94',
+			\ 'seagreen3': '#43cd80',
+			\ 'seagreen4': '#2e8b57',
+			\ 'palegreen1': '#9aff9a',
+			\ 'palegreen2': '#90ee90',
+			\ 'palegreen3': '#7ccd7c',
+			\ 'palegreen4': '#548b54',
+			\ 'springgreen1': '#00ff7f',
+			\ 'springgreen2': '#00ee76',
+			\ 'springgreen3': '#00cd66',
+			\ 'springgreen4': '#008b45',
+			\ 'green1': '#00ff00',
+			\ 'green2': '#00ee00',
+			\ 'green3': '#00cd00',
+			\ 'green4': '#008b00',
+			\ 'chartreuse1': '#7fff00',
+			\ 'chartreuse2': '#76ee00',
+			\ 'chartreuse3': '#66cd00',
+			\ 'chartreuse4': '#458b00',
+			\ 'olivedrab1': '#c0ff3e',
+			\ 'olivedrab2': '#b3ee3a',
+			\ 'olivedrab3': '#9acd32',
+			\ 'olivedrab4': '#698b22',
+			\ 'darkolivegreen1': '#caff70',
+			\ 'darkolivegreen2': '#bcee68',
+			\ 'darkolivegreen3': '#a2cd5a',
+			\ 'darkolivegreen4': '#6e8b3d',
+			\ 'khaki1': '#fff68f',
+			\ 'khaki2': '#eee685',
+			\ 'khaki3': '#cdc673',
+			\ 'khaki4': '#8b864e',
+			\ 'lightgoldenrod1': '#ffec8b',
+			\ 'lightgoldenrod2': '#eedc82',
+			\ 'lightgoldenrod3': '#cdbe70',
+			\ 'lightgoldenrod4': '#8b814c',
+			\ 'lightyellow1': '#ffffe0',
+			\ 'lightyellow2': '#eeeed1',
+			\ 'lightyellow3': '#cdcdb4',
+			\ 'lightyellow4': '#8b8b7a',
+			\ 'yellow1': '#ffff00',
+			\ 'yellow2': '#eeee00',
+			\ 'yellow3': '#cdcd00',
+			\ 'yellow4': '#8b8b00',
+			\ 'gold1': '#ffd700',
+			\ 'gold2': '#eec900',
+			\ 'gold3': '#cdad00',
+			\ 'gold4': '#8b7500',
+			\ 'goldenrod1': '#ffc125',
+			\ 'goldenrod2': '#eeb422',
+			\ 'goldenrod3': '#cd9b1d',
+			\ 'goldenrod4': '#8b6914',
+			\ 'darkgoldenrod1': '#ffb90f',
+			\ 'darkgoldenrod2': '#eead0e',
+			\ 'darkgoldenrod3': '#cd950c',
+			\ 'darkgoldenrod4': '#8b6508',
+			\ 'rosybrown1': '#ffc1c1',
+			\ 'rosybrown2': '#eeb4b4',
+			\ 'rosybrown3': '#cd9b9b',
+			\ 'rosybrown4': '#8b6969',
+			\ 'indianred1': '#ff6a6a',
+			\ 'indianred2': '#ee6363',
+			\ 'indianred3': '#cd5555',
+			\ 'indianred4': '#8b3a3a',
+			\ 'sienna1': '#ff8247',
+			\ 'sienna2': '#ee7942',
+			\ 'sienna3': '#cd6839',
+			\ 'sienna4': '#8b4726',
+			\ 'burlywood1': '#ffd39b',
+			\ 'burlywood2': '#eec591',
+			\ 'burlywood3': '#cdaa7d',
+			\ 'burlywood4': '#8b7355',
+			\ 'wheat1': '#ffe7ba',
+			\ 'wheat2': '#eed8ae',
+			\ 'wheat3': '#cdba96',
+			\ 'wheat4': '#8b7e66',
+			\ 'tan1': '#ffa54f',
+			\ 'tan2': '#ee9a49',
+			\ 'tan3': '#cd853f',
+			\ 'tan4': '#8b5a2b',
+			\ 'chocolate1': '#ff7f24',
+			\ 'chocolate2': '#ee7621',
+			\ 'chocolate3': '#cd661d',
+			\ 'chocolate4': '#8b4513',
+			\ 'firebrick1': '#ff3030',
+			\ 'firebrick2': '#ee2c2c',
+			\ 'firebrick3': '#cd2626',
+			\ 'firebrick4': '#8b1a1a',
+			\ 'brown1': '#ff4040',
+			\ 'brown2': '#ee3b3b',
+			\ 'brown3': '#cd3333',
+			\ 'brown4': '#8b2323',
+			\ 'salmon1': '#ff8c69',
+			\ 'salmon2': '#ee8262',
+			\ 'salmon3': '#cd7054',
+			\ 'salmon4': '#8b4c39',
+			\ 'lightsalmon1': '#ffa07a',
+			\ 'lightsalmon2': '#ee9572',
+			\ 'lightsalmon3': '#cd8162',
+			\ 'lightsalmon4': '#8b5742',
+			\ 'orange1': '#ffa500',
+			\ 'orange2': '#ee9a00',
+			\ 'orange3': '#cd8500',
+			\ 'orange4': '#8b5a00',
+			\ 'darkorange1': '#ff7f00',
+			\ 'darkorange2': '#ee7600',
+			\ 'darkorange3': '#cd6600',
+			\ 'darkorange4': '#8b4500',
+			\ 'coral1': '#ff7256',
+			\ 'coral2': '#ee6a50',
+			\ 'coral3': '#cd5b45',
+			\ 'coral4': '#8b3e2f',
+			\ 'tomato1': '#ff6347',
+			\ 'tomato2': '#ee5c42',
+			\ 'tomato3': '#cd4f39',
+			\ 'tomato4': '#8b3626',
+			\ 'orangered1': '#ff4500',
+			\ 'orangered2': '#ee4000',
+			\ 'orangered3': '#cd3700',
+			\ 'orangered4': '#8b2500',
+			\ 'red1': '#ff0000',
+			\ 'red2': '#ee0000',
+			\ 'red3': '#cd0000',
+			\ 'red4': '#8b0000',
+			\ 'deeppink1': '#ff1493',
+			\ 'deeppink2': '#ee1289',
+			\ 'deeppink3': '#cd1076',
+			\ 'deeppink4': '#8b0a50',
+			\ 'hotpink1': '#ff6eb4',
+			\ 'hotpink2': '#ee6aa7',
+			\ 'hotpink3': '#cd6090',
+			\ 'hotpink4': '#8b3a62',
+			\ 'pink1': '#ffb5c5',
+			\ 'pink2': '#eea9b8',
+			\ 'pink3': '#cd919e',
+			\ 'pink4': '#8b636c',
+			\ 'lightpink1': '#ffaeb9',
+			\ 'lightpink2': '#eea2ad',
+			\ 'lightpink3': '#cd8c95',
+			\ 'lightpink4': '#8b5f65',
+			\ 'palevioletred1': '#ff82ab',
+			\ 'palevioletred2': '#ee799f',
+			\ 'palevioletred3': '#cd6889',
+			\ 'palevioletred4': '#8b475d',
+			\ 'maroon1': '#ff34b3',
+			\ 'maroon2': '#ee30a7',
+			\ 'maroon3': '#cd2990',
+			\ 'maroon4': '#8b1c62',
+			\ 'violetred1': '#ff3e96',
+			\ 'violetred2': '#ee3a8c',
+			\ 'violetred3': '#cd3278',
+			\ 'violetred4': '#8b2252',
+			\ 'magenta1': '#ff00ff',
+			\ 'magenta2': '#ee00ee',
+			\ 'magenta3': '#cd00cd',
+			\ 'magenta4': '#8b008b',
+			\ 'orchid1': '#ff83fa',
+			\ 'orchid2': '#ee7ae9',
+			\ 'orchid3': '#cd69c9',
+			\ 'orchid4': '#8b4789',
+			\ 'plum1': '#ffbbff',
+			\ 'plum2': '#eeaeee',
+			\ 'plum3': '#cd96cd',
+			\ 'plum4': '#8b668b',
+			\ 'mediumorchid1': '#e066ff',
+			\ 'mediumorchid2': '#d15fee',
+			\ 'mediumorchid3': '#b452cd',
+			\ 'mediumorchid4': '#7a378b',
+			\ 'darkorchid1': '#bf3eff',
+			\ 'darkorchid2': '#b23aee',
+			\ 'darkorchid3': '#9a32cd',
+			\ 'darkorchid4': '#68228b',
+			\ 'purple1': '#9b30ff',
+			\ 'purple2': '#912cee',
+			\ 'purple3': '#7d26cd',
+			\ 'purple4': '#551a8b',
+			\ 'mediumpurple1': '#ab82ff',
+			\ 'mediumpurple2': '#9f79ee',
+			\ 'mediumpurple3': '#8968cd',
+			\ 'mediumpurple4': '#5d478b',
+			\ 'thistle1': '#ffe1ff',
+			\ 'thistle2': '#eed2ee',
+			\ 'thistle3': '#cdb5cd',
+			\ 'thistle4': '#8b7b8b',
+			\ 'gray0': '#000000',
+			\ 'grey0': '#000000',
+			\ 'gray1': '#030303',
+			\ 'grey1': '#030303',
+			\ 'gray2': '#050505',
+			\ 'grey2': '#050505',
+			\ 'gray3': '#080808',
+			\ 'grey3': '#080808',
+			\ 'gray4': '#0a0a0a',
+			\ 'grey4': '#0a0a0a',
+			\ 'gray5': '#0d0d0d',
+			\ 'grey5': '#0d0d0d',
+			\ 'gray6': '#0f0f0f',
+			\ 'grey6': '#0f0f0f',
+			\ 'gray7': '#121212',
+			\ 'grey7': '#121212',
+			\ 'gray8': '#141414',
+			\ 'grey8': '#141414',
+			\ 'gray9': '#171717',
+			\ 'grey9': '#171717',
+			\ 'gray10': '#1a1a1a',
+			\ 'grey10': '#1a1a1a',
+			\ 'gray11': '#1c1c1c',
+			\ 'grey11': '#1c1c1c',
+			\ 'gray12': '#1f1f1f',
+			\ 'grey12': '#1f1f1f',
+			\ 'gray13': '#212121',
+			\ 'grey13': '#212121',
+			\ 'gray14': '#242424',
+			\ 'grey14': '#242424',
+			\ 'gray15': '#262626',
+			\ 'grey15': '#262626',
+			\ 'gray16': '#292929',
+			\ 'grey16': '#292929',
+			\ 'gray17': '#2b2b2b',
+			\ 'grey17': '#2b2b2b',
+			\ 'gray18': '#2e2e2e',
+			\ 'grey18': '#2e2e2e',
+			\ 'gray19': '#303030',
+			\ 'grey19': '#303030',
+			\ 'gray20': '#333333',
+			\ 'grey20': '#333333',
+			\ 'gray21': '#363636',
+			\ 'grey21': '#363636',
+			\ 'gray22': '#383838',
+			\ 'grey22': '#383838',
+			\ 'gray23': '#3b3b3b',
+			\ 'grey23': '#3b3b3b',
+			\ 'gray24': '#3d3d3d',
+			\ 'grey24': '#3d3d3d',
+			\ 'gray25': '#404040',
+			\ 'grey25': '#404040',
+			\ 'gray26': '#424242',
+			\ 'grey26': '#424242',
+			\ 'gray27': '#454545',
+			\ 'grey27': '#454545',
+			\ 'gray28': '#474747',
+			\ 'grey28': '#474747',
+			\ 'gray29': '#4a4a4a',
+			\ 'grey29': '#4a4a4a',
+			\ 'gray30': '#4d4d4d',
+			\ 'grey30': '#4d4d4d',
+			\ 'gray31': '#4f4f4f',
+			\ 'grey31': '#4f4f4f',
+			\ 'gray32': '#525252',
+			\ 'grey32': '#525252',
+			\ 'gray33': '#545454',
+			\ 'grey33': '#545454',
+			\ 'gray34': '#575757',
+			\ 'grey34': '#575757',
+			\ 'gray35': '#595959',
+			\ 'grey35': '#595959',
+			\ 'gray36': '#5c5c5c',
+			\ 'grey36': '#5c5c5c',
+			\ 'gray37': '#5e5e5e',
+			\ 'grey37': '#5e5e5e',
+			\ 'gray38': '#616161',
+			\ 'grey38': '#616161',
+			\ 'gray39': '#636363',
+			\ 'grey39': '#636363',
+			\ 'gray40': '#666666',
+			\ 'grey40': '#666666',
+			\ 'gray41': '#696969',
+			\ 'grey41': '#696969',
+			\ 'gray42': '#6b6b6b',
+			\ 'grey42': '#6b6b6b',
+			\ 'gray43': '#6e6e6e',
+			\ 'grey43': '#6e6e6e',
+			\ 'gray44': '#707070',
+			\ 'grey44': '#707070',
+			\ 'gray45': '#737373',
+			\ 'grey45': '#737373',
+			\ 'gray46': '#757575',
+			\ 'grey46': '#757575',
+			\ 'gray47': '#787878',
+			\ 'grey47': '#787878',
+			\ 'gray48': '#7a7a7a',
+			\ 'grey48': '#7a7a7a',
+			\ 'gray49': '#7d7d7d',
+			\ 'grey49': '#7d7d7d',
+			\ 'gray50': '#7f7f7f',
+			\ 'grey50': '#7f7f7f',
+			\ 'gray51': '#828282',
+			\ 'grey51': '#828282',
+			\ 'gray52': '#858585',
+			\ 'grey52': '#858585',
+			\ 'gray53': '#878787',
+			\ 'grey53': '#878787',
+			\ 'gray54': '#8a8a8a',
+			\ 'grey54': '#8a8a8a',
+			\ 'gray55': '#8c8c8c',
+			\ 'grey55': '#8c8c8c',
+			\ 'gray56': '#8f8f8f',
+			\ 'grey56': '#8f8f8f',
+			\ 'gray57': '#919191',
+			\ 'grey57': '#919191',
+			\ 'gray58': '#949494',
+			\ 'grey58': '#949494',
+			\ 'gray59': '#969696',
+			\ 'grey59': '#969696',
+			\ 'gray60': '#999999',
+			\ 'grey60': '#999999',
+			\ 'gray61': '#9c9c9c',
+			\ 'grey61': '#9c9c9c',
+			\ 'gray62': '#9e9e9e',
+			\ 'grey62': '#9e9e9e',
+			\ 'gray63': '#a1a1a1',
+			\ 'grey63': '#a1a1a1',
+			\ 'gray64': '#a3a3a3',
+			\ 'grey64': '#a3a3a3',
+			\ 'gray65': '#a6a6a6',
+			\ 'grey65': '#a6a6a6',
+			\ 'gray66': '#a8a8a8',
+			\ 'grey66': '#a8a8a8',
+			\ 'gray67': '#ababab',
+			\ 'grey67': '#ababab',
+			\ 'gray68': '#adadad',
+			\ 'grey68': '#adadad',
+			\ 'gray69': '#b0b0b0',
+			\ 'grey69': '#b0b0b0',
+			\ 'gray70': '#b3b3b3',
+			\ 'grey70': '#b3b3b3',
+			\ 'gray71': '#b5b5b5',
+			\ 'grey71': '#b5b5b5',
+			\ 'gray72': '#b8b8b8',
+			\ 'grey72': '#b8b8b8',
+			\ 'gray73': '#bababa',
+			\ 'grey73': '#bababa',
+			\ 'gray74': '#bdbdbd',
+			\ 'grey74': '#bdbdbd',
+			\ 'gray75': '#bfbfbf',
+			\ 'grey75': '#bfbfbf',
+			\ 'gray76': '#c2c2c2',
+			\ 'grey76': '#c2c2c2',
+			\ 'gray77': '#c4c4c4',
+			\ 'grey77': '#c4c4c4',
+			\ 'gray78': '#c7c7c7',
+			\ 'grey78': '#c7c7c7',
+			\ 'gray79': '#c9c9c9',
+			\ 'grey79': '#c9c9c9',
+			\ 'gray80': '#cccccc',
+			\ 'grey80': '#cccccc',
+			\ 'gray81': '#cfcfcf',
+			\ 'grey81': '#cfcfcf',
+			\ 'gray82': '#d1d1d1',
+			\ 'grey82': '#d1d1d1',
+			\ 'gray83': '#d4d4d4',
+			\ 'grey83': '#d4d4d4',
+			\ 'gray84': '#d6d6d6',
+			\ 'grey84': '#d6d6d6',
+			\ 'gray85': '#d9d9d9',
+			\ 'grey85': '#d9d9d9',
+			\ 'gray86': '#dbdbdb',
+			\ 'grey86': '#dbdbdb',
+			\ 'gray87': '#dedede',
+			\ 'grey87': '#dedede',
+			\ 'gray88': '#e0e0e0',
+			\ 'grey88': '#e0e0e0',
+			\ 'gray89': '#e3e3e3',
+			\ 'grey89': '#e3e3e3',
+			\ 'gray90': '#e5e5e5',
+			\ 'grey90': '#e5e5e5',
+			\ 'gray91': '#e8e8e8',
+			\ 'grey91': '#e8e8e8',
+			\ 'gray92': '#ebebeb',
+			\ 'grey92': '#ebebeb',
+			\ 'gray93': '#ededed',
+			\ 'grey93': '#ededed',
+			\ 'gray94': '#f0f0f0',
+			\ 'grey94': '#f0f0f0',
+			\ 'gray95': '#f2f2f2',
+			\ 'grey95': '#f2f2f2',
+			\ 'gray96': '#f5f5f5',
+			\ 'grey96': '#f5f5f5',
+			\ 'gray97': '#f7f7f7',
+			\ 'grey97': '#f7f7f7',
+			\ 'gray98': '#fafafa',
+			\ 'grey98': '#fafafa',
+			\ 'gray99': '#fcfcfc',
+			\ 'grey99': '#fcfcfc',
+			\ 'gray100': '#ffffff',
+			\ 'grey100': '#ffffff',
+			\ 'dark grey': '#a9a9a9',
+			\ 'darkgrey': '#a9a9a9',
+			\ 'dark gray': '#a9a9a9',
+			\ 'darkgray': '#a9a9a9',
+			\ 'dark blue': '#00008b',
+			\ 'darkblue': '#00008b',
+			\ 'dark cyan': '#008b8b',
+			\ 'darkcyan': '#008b8b',
+			\ 'dark magenta': '#8b008b',
+			\ 'darkmagenta': '#8b008b',
+			\ 'dark red': '#8b0000',
+			\ 'darkred': '#8b0000',
+			\ 'light green': '#90ee90',
+			\ 'lightgreen': '#90ee90',
+			\ 'crimson': '#dc143c',
+			\ 'indigo': '#4b0082',
+			\ 'olive': '#808000',
+			\ 'rebecca purple': '#663399',
+			\ 'rebeccapurple': '#663399',
+			\ 'silver': '#c0c0c0',
+			\ 'teal': '#008080'
+			\ }, 'keep')
+
+let &cpo= s:keepcpo
+unlet s:keepcpo
+
+"vim: sw=4

runtime/compiler/fpc.vim

@@ -12,6 +12,6 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
   command -nargs=* CompilerSet setlocal <args>
 endif
 
-" NOTE: compiler must be runned with -vb to write whole source path, not only file
+" NOTE: compiler must be run with -vb to write whole source path, not only file
 " name.
 CompilerSet errorformat=%f(%l\\,%c)\ %m

runtime/compiler/scdoc.vim

@@ -0,0 +1,16 @@
+" scdoc compiler for Vim
+" Compiler: scdoc
+" Maintainer: Greg Anders <greg@gpanders.com>
+" Last Updated: 2019-10-24
+
+if exists('current_compiler')
+    finish
+endif
+let current_compiler = 'scdoc'
+
+if exists(':CompilerSet') != 2
+    command -nargs=* CompilerSet setlocal <args>
+endif
+
+CompilerSet makeprg=scdoc\ <\ %\ 2>&1
+CompilerSet errorformat=Error\ at\ %l:%c:\ %m,%-G%.%#

runtime/compiler/spectral.vim

@@ -0,0 +1,17 @@
+" Vim compiler file
+" Compiler:    Spectral for YAML
+" Maintainer:  Romain Lafourcade <romainlafourcade@gmail.com>
+" Last Change: 2021 July 21
+
+if exists("current_compiler")
+    finish
+endif
+let current_compiler = "spectral"
+
+if exists(":CompilerSet") != 2
+    command -nargs=* CompilerSet setlocal <args>
+endif
+
+CompilerSet makeprg=spectral\ lint\ %\ -f\ text
+CompilerSet errorformat=%f:%l:%c\ %t%.%\\{-}\ %m
+

runtime/compiler/tex.vim

@@ -18,7 +18,7 @@ endif
 if exists('b:tex_ignore_makefile') || exists('g:tex_ignore_makefile') ||
 			\(!filereadable('Makefile') && !filereadable('makefile'))
 	" If buffer-local variable 'tex_flavor' exists, it defines TeX flavor,
-	" otherwize the same for global variable with same name, else it will be
+	" otherwise the same for global variable with same name, else it will be
 	" LaTeX
 	if exists("b:tex_flavor")
 		let current_compiler = b:tex_flavor

runtime/compiler/yamllint.vim

@@ -0,0 +1,16 @@
+" Vim compiler file
+" Compiler:    Yamllint for YAML
+" Maintainer:  Romain Lafourcade <romainlafourcade@gmail.com>
+" Last Change: 2021 July 21
+
+if exists("current_compiler")
+    finish
+endif
+let current_compiler = "yamllint"
+
+if exists(":CompilerSet") != 2
+    command -nargs=* CompilerSet setlocal <args>
+endif
+
+CompilerSet makeprg=yamllint\ -f\ parsable
+

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Jul 02
+*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -76,6 +76,12 @@ and in a `:def` function) then {cmd} will be executed as in Vim9
 script.  Thus this depends on where the autocmd is defined, not where it is
 triggered.
 
+{cmd} can be a block, like with `:command`, see |:command-repl|.  Example: >
+	au BufReadPost *.xml {
+		  setlocal matchpairs+=<:>
+		  /<start
+		}
+
 Note: The ":autocmd" command can only be followed by another command when the
 '|' appears before {cmd}.  This works: >
 	:augroup mine | au! BufRead | augroup END
@@ -342,6 +348,7 @@ Name			triggered by ~
 
 |WinNew|		after creating a new window
 |TabNew|		after creating a new tab page
+|WinClosed|		after closing a window
 |TabClosed|		after closing a tab page
 |WinEnter|		after entering another window
 |WinLeave|		before leaving a window
@@ -360,6 +367,8 @@ Name			triggered by ~
 |InsertCharPre|		when a character was typed in Insert mode, before
 			inserting it
 
+|ModeChanged|		after changing the mode
+
 |TextChanged|		after a change was made to the text in Normal mode
 |TextChangedI|		after a change was made to the text in Insert mode
 			when popup menu is not visible
@@ -679,7 +688,8 @@ CursorHoldI			Just like CursorHold, but in Insert mode.
 CursorMoved			After the cursor was moved in Normal or Visual
 				mode.  Also when the text of the cursor line
 				has been changed, e.g., with "x", "rx" or "p".
-				Not triggered when there is typeahead, when
+				Not triggered when there is typeahead, while
+				executing commands in a script file, when
 				an operator is pending or when moving to
 				another window while remaining at the same
 				cursor position.
@@ -699,7 +709,7 @@ EncodingChanged			Fires off after the 'encoding' option has been
 							*FileAppendCmd*
 FileAppendCmd			Before appending to a file.  Should do the
 				appending to the file.  Use the '[ and ']
-				marks for the range of lines.|Cmd-event|
+				marks for the range of lines. |Cmd-event|
 							*FileAppendPost*
 FileAppendPost			After appending to a file.
 							*FileAppendPre*
@@ -827,7 +837,7 @@ FilterReadPre			Before reading a file from a filter command.
 							*FilterWritePost*
 FilterWritePost			After writing a file for a filter command or
 				making a diff with an external diff (see
-				DiffUpdated for internal diff).
+				|DiffUpdated| for internal diff).
 				Vim checks the pattern against the name of
 				the current buffer as with FilterWritePre.
 				Not triggered when 'shelltemp' is off.
@@ -918,7 +928,27 @@ MenuPopup			Just before showing the popup menu (under the
 					i	Insert
 					c	Command line
 					tl	Terminal
-							*OptionSet*
+							*ModeChanged*
+ModeChanged			After changing the mode. The pattern is
+				matched against `'old_mode:new_mode'`, for
+				example match against `*:c*` to simulate
+				|CmdlineEnter|.
+				The following values of |v:event| are set:
+				   old_mode	The mode before it changed.
+				   new_mode	The new mode as also returned
+						by |mode()| called with a
+						non-zero argument.
+				When ModeChanged is triggered, old_mode will
+				have the value of new_mode when the event was
+				last triggered.
+				This will be triggered on every minor mode
+				change.
+				Usage example to use relative line numbers
+				when entering Visual mode: >
+	:au ModeChanged [vV\x16]*:* let &l:rnu = mode() =~# '^[vV\x16]'
+	:au ModeChanged *:[vV\x16]* let &l:rnu = mode() =~# '^[vV\x16]'
+	:au WinEnter,WinLeave * let &l:rnu = mode() =~# '^[vV\x16]'
+<							*OptionSet*
 OptionSet			After setting an option.  The pattern is
 				matched against the long option name.
 				|<amatch>| indicates what option has been set.
@@ -1171,9 +1201,9 @@ TextYankPost			After text has been yanked or deleted in the
 						register, as a list of lines,
 						like with: >
 						getreg(r, 1, 1)
-<				   regname	Name of the |register| or
-						empty string for the unnamed
-						register.
+<				   regname	Name of the register or empty
+						string for the unnamed
+						register, see |registers|.
 				   regtype	Type of the register, see
 						|getregtype()|.
 				   visual	True if the operation is
@@ -1251,6 +1281,12 @@ VimResume			When the Vim instance is resumed after being
 VimSuspend			When the Vim instance is suspended.  Only when
 				CTRL-Z was typed inside Vim, not when the
 				SIGSTOP or SIGTSTP signal was sent to Vim.
+							*WinClosed*
+WinClosed			After closing a window.  The pattern is
+				matched against the |window-ID|.  Both
+				<amatch> and <afile> are set to the
+				|window-ID|.  Non-recursive (event cannot
+				trigger itself).
 							*WinEnter*
 WinEnter			After entering another window.  Not done for
 				the first window, when Vim has just started.
@@ -1478,6 +1514,13 @@ Example: >
 This prevents having the autocommands defined twice (e.g., after sourcing the
 .vimrc file again).
 
+						*FileExplorer*
+There is one group that is recognized by Vim: FileExplorer.  If this group
+exists Vim assumes that editing a directory is possible and will trigger a
+plugin that lists the files in that directory.  This is used by the |netrw|
+plugin.  This allows you to do: >
+	browse edit
+
 ==============================================================================
 9. Executing autocommands				*autocmd-execute*
 

runtime/doc/change.txt

@@ -1184,9 +1184,6 @@ a register, a paste on a visual selected area will paste that single line on
 each of the selected lines (thus replacing the blockwise selected region by a
 block of the pasted line).
 
-Use |zP|/|zp| to paste a blockwise yanked register without appending trailing
-spaces.
-
 							*blockwise-register*
 If you use a blockwise Visual mode command to get the text into the register,
 the block of text will be inserted before ("P") or after ("p") the cursor
@@ -1197,6 +1194,9 @@ this happen.  However, if the width of the block is not a multiple of a <Tab>
 width and the text after the inserted block contains <Tab>s, that text may be
 misaligned.
 
+Use |zP|/|zp| to paste a blockwise yanked register without appending trailing
+spaces.
+
 Note that after a characterwise yank command, Vim leaves the cursor on the
 first yanked character that is closest to the start of the buffer.  This means
 that "yl" doesn't move the cursor, but "yh" moves the cursor one character

runtime/doc/channel.txt

@@ -536,7 +536,7 @@ ch_evalraw({handle}, {string} [, {options}])		*ch_evalraw()*
 			GetChannel()->ch_evalraw(rawstring)
 
 ch_getbufnr({handle}, {what})				 *ch_getbufnr()*
-		Get the buffer number that {handle} is using for {what}.
+		Get the buffer number that {handle} is using for String {what}.
 		{handle} can be a Channel or a Job that has a Channel.
 		{what} can be "err" for stderr, "out" for stdout or empty for
 		socket output.
@@ -586,8 +586,8 @@ ch_info({handle})						*ch_info()*
 
 
 ch_log({msg} [, {handle}])					*ch_log()*
-		Write {msg} in the channel log file, if it was opened with
-		|ch_logfile()|.
+		Write String {msg} in the channel log file, if it was opened
+		with |ch_logfile()|.
 		When {handle} is passed the channel number is used for the
 		message.
 		{handle} can be a Channel or a Job that has a Channel.  The
@@ -625,7 +625,7 @@ ch_open({address} [, {options}])				*ch_open()*
 		Open a channel to {address}.  See |channel|.
 		Returns a Channel.  Use |ch_status()| to check for failure.
 
-		{address} has the form "hostname:port", e.g.,
+		{address} is a String and has the form "hostname:port", e.g.,
 		"localhost:8765".
 
 		When using an IPv6 address, enclose it within square brackets.

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 8.2.  Last change: 2021 May 30
+*cmdline.txt*   For Vim version 8.2.  Last change: 2021 Aug 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -170,7 +170,12 @@ CTRL-R {register}					*c_CTRL-R* *c_<C-R>*
 				too.
 				When the result is a Float it's automatically
 				converted to a String.
-		See |registers| about registers.
+				Note that when you only want to move the
+				cursor and not insert anything, you must make
+				sure the expression evaluates to an empty
+				string.  E.g.: >
+					<C-R><C-R>=setcmdpos(2)[-1]<CR>
+<		See |registers| about registers.
 		Implementation detail: When using the |expression| register
 		and invoking setcmdpos(), this sets the position before
 		inserting the resulting string.  Use CTRL-R CTRL-R to set the
@@ -798,7 +803,7 @@ three lines: >
 		3:d<CR>		is translated into: .,.+2d<CR>
 <
 
-Visual Mode and Range					
+Visual Mode and Range
 							*v_:*
 {Visual}:	Starts a command-line with the Visual selected lines as a
 		range.  The code `:'<,'>` is used for this range, which makes

runtime/doc/digraph.txt

@@ -1,4 +1,4 @@
-*digraph.txt*   For Vim version 8.2.  Last change: 2020 Jul 16
+*digraph.txt*   For Vim version 8.2.  Last change: 2021 Jul 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -38,6 +38,9 @@ An alternative is using the 'keymap' option.
 <			Avoid defining a digraph with '_' (underscore) as the
 			first character, it has a special meaning in the
 			future.
+			NOTE: This command cannot add a digraph that starts
+			with a white space.  If you want to add such digraph,
+			you can use |digraph_set()| instead.
 
 Vim is normally compiled with the |+digraphs| feature.  If the feature is
 disabled, the ":digraph" command will display an error message.
@@ -348,8 +351,8 @@ $	DO	0x24	 36	DOLLAR SIGN
 þ	th	0xfe	254	LATIN SMALL LETTER THORN (Icelandic)
 ÿ	y:	0xff	255	LATIN SMALL LETTER Y WITH DIAERESIS
 
-If your Vim is compiled with |multibyte| support and you are using a multibyte
-'encoding', Vim provides this enhanced set of additional digraphs:
+If you are using a |multibyte| 'encoding', Vim provides this enhanced set of
+additional digraphs:
 
 							*digraph-table-mbyte*
 char  digraph	hex	dec	official name ~

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.2.  Last change: 2021 May 27
+*editing.txt*   For Vim version 8.2.  Last change: 2021 Oct 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1225,7 +1225,9 @@ If you want to always use ":confirm", set the 'confirm' option.
 			|:diffsplit|, |:diffpatch|, |:open|, |:pedit|,
 			|:redir|, |:source|, |:update|, |:visual|, |:vsplit|,
 			and |:qall| if 'confirm' is set.
-			{only in Win32, Athena, Motif, GTK and Mac GUI}
+			{only in Win32, Athena, Motif, GTK and Mac GUI, in
+			console `browse edit` works if the FileExplorer
+			autocommand group exists}
 			When ":browse" is not possible you get an error
 			message.  If the |+browse| feature is missing or the
 			{command} doesn't support browsing, the {command} is
@@ -1327,26 +1329,26 @@ present in 'cpoptions' and "!" is not used in the command.
 			other tabs and for windows in the current tab that
 			have their own window-local directory.
 
-							*:tch* *:tchdir*
-:tch[dir][!]		Same as |:tcd|.
-
 							*:tcd-*
 :tc[d][!] -		Change to the previous current directory, before the
 			last ":tcd {path}" command.
 
+							*:tch* *:tchdir*
+:tch[dir][!]		Same as |:tcd|.
+
 							*:lc* *:lcd*
 :lc[d][!] {path}	Like |:cd|, but only set the current directory when
 			the cursor is in the current window.  The current
 			directory for other windows is not changed, switching
 			to another window will stop using {path}.
 
-							*:lch* *:lchdir*
-:lch[dir][!]		Same as |:lcd|.
-
 							*:lcd-*
 :lcd[!] -		Change to the previous current directory, before the
 			last ":lcd {path}" command.
 
+							*:lch* *:lchdir*
+:lch[dir][!]		Same as |:lcd|.
+
 							*:pw* *:pwd* *E187*
 :pw[d]			Print the current directory name.
 			Also see |getcwd()|.
@@ -1373,14 +1375,14 @@ change anything for the current directory.
 When a |:lcd| command has been used for a window, the specified directory
 becomes the current directory for that window.  Windows where the |:lcd|
 command has not been used stick to the global or tab-local current directory.
-When jumping to another window the current directory will become the last
+When jumping to another window the current directory is changed to the last
 specified local current directory.  If none was specified, the global or
 tab-local current directory is used.
 
 When a |:tcd| command has been used for a tab page, the specified directory
 becomes the current directory for the current tab page and the current window.
 The current directory of other tab pages is not affected.  When jumping to
-another tab page, the current directory will become the last specified local
+another tab page, the current directory is changed to the last specified local
 directory for that tab page. If the current tab has no local current directory
 the global current directory is used.
 
@@ -1469,8 +1471,11 @@ be readable again.  If you use a wrong key, it will be a mess.
 :X	Prompt for an encryption key.  The typing is done without showing the
 	actual text, so that someone looking at the display won't see it.
 	The typed key is stored in the 'key' option, which is used to encrypt
-	the file when it is written.  The file will remain unchanged until you
-	write it.  See also |-x|.
+	the file when it is written.
+	The file will remain unchanged until you write it.  Note that commands
+	such as `:xit` and `ZZ` will NOT write the file unless there are other
+	changes.
+	See also |-x|.
 
 The value of the 'key' options is used when text is written.  When the option
 is not empty, the written file will be encrypted, using the value as the
@@ -1671,6 +1676,11 @@ It is also possible that you modified the file yourself, from another edit
 session or with another command (e.g., a filter command).  Then you will know
 which version of the file you want to keep.
 
+The accuracy of the time check depends on the filesystem.  On Unix it is
+usually sub-second.  With old file sytems and on MS-Windows it is normally one
+second.  Use has('nanotime') check if sub-second time stamp checks are
+available.
+
 There is one situation where you get the message while there is nothing wrong:
 On a Win32 system on the day daylight saving time starts.  There is something
 in the Win32 libraries that confuses Vim about the hour time difference.  The
@@ -1749,6 +1759,12 @@ There are three different types of searching:
 	/u/user_x/work/include
 	/u/user_x/include
 
+<   Note: If your 'path' setting includes an non-existing directory, Vim will
+   skip the non-existing directory, but continues searching in the parent of
+   the non-existing directory if upwards searching is used.  E.g. when
+   searching "../include" and that doesn't exist, and upward searching is
+   used, also searches in "..".
+
 3) Combined up/downward search:
    If Vim's current path is /u/user_x/work/release and you do >
 	set path=**;/u/user_x

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 8.2.  Last change: 2021 Mar 11
+*filetype.txt*  For Vim version 8.2.  Last change: 2021 Sep 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -146,6 +146,7 @@ can be used to overrule the filetype used for certain extensions:
 	*.inc		g:filetype_inc
 	*.w		g:filetype_w	|ft-cweb-syntax|
 	*.i		g:filetype_i	|ft-progress-syntax|
+	*.m		g:filetype_m	|ft-mathematica-syntax|
 	*.p		g:filetype_p	|ft-pascal-syntax|
 	*.pp		g:filetype_pp	|ft-pascal-syntax|
 	*.sh		g:bash_is_sh	|ft-sh-syntax|
@@ -544,6 +545,14 @@ One command, :DiffGitCached, is provided to show a diff of the current commit
 in the preview window.  It is equivalent to calling "git diff --cached" plus
 any arguments given to the command.
 
+GPROF							*ft-gprof-plugin*
+
+The gprof filetype plugin defines a mapping <C-]> to jump from a function
+entry in the gprof flat profile or from a function entry in the call graph
+to the details of that function in the call graph.
+
+The mapping can be disabled with: >
+	let g:no_gprof_maps = 1
 
 MAIL							*ft-mail-plugin*
 

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 8.2.  Last change: 2019 Jun 02
+*fold.txt*      For Vim version 8.2.  Last change: 2021 Jul 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -541,6 +541,8 @@ nest, the nested fold is one character right of the fold it's contained in.
 
 A closed fold is indicated with a '+'.
 
+These characters can be changed with the 'fillchars' option.
+
 Where the fold column is too narrow to display all nested folds, digits are
 shown to indicate the nesting level.
 

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 8.2.  Last change: 2021 Apr 05
+*gui_w32.txt*   For Vim version 8.2.  Last change: 2021 Oct 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -323,20 +323,10 @@ These extra colors are also available:
 Gray, Grey, LightYellow, SeaGreen, Orange, Purple, SlateBlue, Violet,
 
 								*rgb.txt*
-Additionally, colors defined by a "rgb.txt" file can be used.  This file is
-well known from X11.  A few lines from it: >
-
-  255 218 185		   peach puff
-  205 133  63		   peru
-  255 181 197		   pink
-
-This shows the layout of the file:  First the R, G and B value as a decimal
-number, followed by the name of the color.  The four fields are separated by
-spaces.
-
-You can get an rgb.txt file from any X11 distribution.  It is located in a
-directory like "/usr/X11R6/lib/X11/".  For Vim it must be located in the
-$VIMRUNTIME directory.  Thus the file can be found with "$VIMRUNTIME/rgb.txt".
+Additionally, colors defined by a default color list can be used.  For more
+info see |:colorscheme|.  These colors used to be defined in
+$VIMRUNTIME/rgb.txt, now they are in |v:colornames| which is initialized from
+$VIMRUNTIME/colors/lists/default.vim.
 
 ==============================================================================
 						*gui-w32-dialogs* *dialog*

runtime/doc/help.txt

@@ -88,6 +88,7 @@ Tuning Vim ~
 |usr_43.txt|  Using filetypes
 |usr_44.txt|  Your own syntax highlighted
 |usr_45.txt|  Select your language
+|usr_46.txt|  Write plugins using Vim9 script
 
 Making Vim Run ~
 |usr_90.txt|  Installing Vim

runtime/doc/if_lua.txt

@@ -1,4 +1,4 @@
-*if_lua.txt*    For Vim version 8.2.  Last change: 2021 Apr 07
+*if_lua.txt*    For Vim version 8.2.  Last change: 2021 Aug 06
 
 
 		  VIM REFERENCE MANUAL    by Luis Carvalho
@@ -175,10 +175,17 @@ Vim evaluation and command execution, and others.
 					:lua print(type(l), vim.type(l))
 					:" list
 <
-	vim.command({cmd})	Executes the vim (ex-mode) command {cmd}.
+	vim.command({cmds})	Executes one or more lines of Ex-mode commands
+				in {cmds}.
 				Examples: >
 					:lua vim.command"set tw=60"
 					:lua vim.command"normal ddp"
+					lua << trim END
+					  vim.command([[
+					      new Myfile.js
+					      call search('start')
+					  ]])
+					END
 <
 	vim.eval({expr})	Evaluates expression {expr} (see |expression|),
 				converts the result to Lua, and returns it.
@@ -211,6 +218,44 @@ Vim evaluation and command execution, and others.
 	vim.lua_version		The Lua version Vim was compiled with, in the
 				form {major}.{minor}.{patch}, e.g. "5.1.4".
 
+	vim.version()		Returns a Lua table with the Vim version.
+				The table will have the following keys:
+					major - major Vim version.
+					minor - minor Vim version.
+					patch - latest patch included.
+
+                                                        *lua-vim-variables*
+The Vim editor global dictionaries |g:| |w:| |b:| |t:| |v:| can be accessed
+from Lua conveniently and idiomatically by referencing the `vim.*` Lua tables
+described below. In this way you can easily read and modify global Vim script
+variables from Lua.
+
+Example: >
+
+    vim.g.foo = 5     -- Set the g:foo Vim script variable.
+    print(vim.g.foo)  -- Get and print the g:foo Vim script variable.
+    vim.g.foo = nil   -- Delete (:unlet) the Vim script variable.
+
+vim.g                                                   *vim.g*
+        Global (|g:|) editor variables.
+        Key with no value returns `nil`.
+
+vim.b                                                   *vim.b*
+        Buffer-scoped (|b:|) variables for the current buffer.
+        Invalid or unset key returns `nil`.
+
+vim.w                                                   *vim.w*
+        Window-scoped (|w:|) variables for the current window.
+        Invalid or unset key returns `nil`.
+
+vim.t                                                   *vim.t*
+        Tabpage-scoped (|t:|) variables for the current tabpage.
+        Invalid or unset key returns `nil`.
+
+vim.v                                                   *vim.v*
+        |v:| variables.
+        Invalid or unset key returns `nil`.
+
 ==============================================================================
 3. List userdata					*lua-list*
 

runtime/doc/indent.txt

@@ -608,26 +608,25 @@ CLOJURE					*ft-clojure-indent* *clojure-indent*
 Clojure indentation differs somewhat from traditional Lisps, due in part to
 the use of square and curly brackets, and otherwise by community convention.
 These conventions are not universally followed, so the Clojure indent script
-offers a few configurable options, listed below.
+offers a few configuration options.
+
+(If the current Vim does not include |searchpairpos()|, the indent script falls
+back to normal 'lisp' indenting, and the following options are ignored.)
 
-If the current vim does not include searchpairpos(), the indent script falls
-back to normal 'lisp' indenting, and the following options are ignored.
 
 							*g:clojure_maxlines*
 
-Set maximum scan distance of searchpairpos(). Larger values trade performance
-for correctness when dealing with very long forms. A value of 0 will scan
-without limits.
->
-	" Default
-	let g:clojure_maxlines = 100
-<
+Sets maximum scan distance of `searchpairpos()`.  Larger values trade
+performance for correctness when dealing with very long forms.  A value of
+0 will scan without limits.  The default is 300.
+
+
 						*g:clojure_fuzzy_indent*
 					*g:clojure_fuzzy_indent_patterns*
 					*g:clojure_fuzzy_indent_blacklist*
 
 The 'lispwords' option is a list of comma-separated words that mark special
-forms whose subforms must be indented with two spaces.
+forms whose subforms should be indented with two spaces.
 
 For example:
 >
@@ -645,15 +644,11 @@ the fuzzy indent feature:
 	let g:clojure_fuzzy_indent_patterns = ['^with', '^def', '^let']
 	let g:clojure_fuzzy_indent_blacklist =
 		\ ['-fn$', '\v^with-%(meta|out-str|loading-context)$']
-
-	" Legacy comma-delimited string version; the list format above is
-	" recommended. Note that patterns are implicitly anchored with ^ and $
-	let g:clojure_fuzzy_indent_patterns = 'with.*,def.*,let.*'
 <
 |g:clojure_fuzzy_indent_patterns| and |g:clojure_fuzzy_indent_blacklist| are
-|Lists| of patterns that will be matched against the unquoted, unqualified
-symbol at the head of a list. This means that a pattern like "^foo" will match
-all these candidates: "foobar", "my.ns/foobar", and "#'foobar".
+lists of patterns that will be matched against the unqualified symbol at the
+head of a list.  This means that a pattern like `"^foo"` will match all these
+candidates: `foobar`, `my.ns/foobar`, and `#'foobar`.
 
 Each candidate word is tested for special treatment in this order:
 
@@ -664,20 +659,22 @@ Each candidate word is tested for special treatment in this order:
 	   |g:clojure_fuzzy_indent_patterns|
 	4. Return false and indent normally otherwise
 
+
 					*g:clojure_special_indent_words*
 
-Some forms in Clojure are indented so that every subform is indented only two
-spaces, regardless of 'lispwords'. If you have a custom construct that should
-be indented in this idiosyncratic fashion, you can add your symbols to the
-default list below.
+Some forms in Clojure are indented such that every subform is indented by only
+two spaces, regardless of 'lispwords'.  If you have a custom construct that
+should be indented in this idiosyncratic fashion, you can add your symbols to
+the default list below.
 >
 	" Default
 	let g:clojure_special_indent_words =
 	   \ 'deftype,defrecord,reify,proxy,extend-type,extend-protocol,letfn'
 <
+
 					*g:clojure_align_multiline_strings*
 
-Align subsequent lines in multiline strings to the column after the opening
+Align subsequent lines in multi-line strings to the column after the opening
 quote, instead of the same column.
 
 For example:
@@ -694,11 +691,7 @@ For example:
 	   enim ad minim veniam, quis nostrud exercitation ullamco laboris
 	   nisi ut aliquip ex ea commodo consequat.")
 <
-This option is off by default.
->
-	" Default
-	let g:clojure_align_multiline_strings = 0
-<
+
 						*g:clojure_align_subforms*
 
 By default, parenthesized compound forms that look like function calls and
@@ -709,18 +702,14 @@ two spaces relative to the opening paren:
 	  bar
 	  baz)
 <
-Setting this option changes this behavior so that all subforms are aligned to
-the same column, emulating the default behavior of clojure-mode.el:
+Setting this option to `1` changes this behaviour so that all subforms are
+aligned to the same column, emulating the default behaviour of
+clojure-mode.el:
 >
 	(foo
 	 bar
 	 baz)
 <
-This option is off by default.
->
-	" Default
-	let g:clojure_align_subforms = 0
-<
 
 FORTRAN							*ft-fortran-indent*
 

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 8.2.  Last change: 2021 Jun 19
+*index.txt*     For Vim version 8.2.  Last change: 2021 Aug 31
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -168,6 +168,7 @@ commands in CTRL-X submode				*i_CTRL-X_index*
 |i_CTRL-X_CTRL-Y|	CTRL-X CTRL-Y	scroll down
 |i_CTRL-X_CTRL-U|	CTRL-X CTRL-U	complete with 'completefunc'
 |i_CTRL-X_CTRL-V|	CTRL-X CTRL-V	complete like in : command line
+|i_CTRL-X_CTRL-Z|	CTRL-X CTRL-Z	stop completion, keeping the text as-is
 |i_CTRL-X_CTRL-]|	CTRL-X CTRL-]	complete tags
 |i_CTRL-X_s|		CTRL-X s	spelling suggestions
 

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.2.  Last change: 2021 Jul 05
+*insert.txt*    For Vim version 8.2.  Last change: 2021 Oct 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -640,6 +640,8 @@ Completion can be done for:
 12. Spelling suggestions				|i_CTRL-X_s|
 13. keywords in 'complete'				|i_CTRL-N| |i_CTRL-P|
 
+Additionally, |i_CTRL-X_CTRL-Z| stops completion without changing the text.
+
 All these, except CTRL-N and CTRL-P, are done in CTRL-X mode.  This is a
 sub-mode of Insert and Replace modes.  You enter CTRL-X mode by typing CTRL-X
 and one of the CTRL-X commands.  You exit CTRL-X mode by typing a key that is
@@ -822,6 +824,9 @@ CTRL-X CTRL-K		Search the files given with the 'dictionary' option
 	CTRL-P		Search backwards for next matching keyword.  This
 			keyword replaces the previous matching keyword.
 
+
+Completing words in 'thesaurus'				*compl-thesaurus*
+
 							*i_CTRL-X_CTRL-T*
 CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			the 'thesaurus' option instead of 'dictionary'.  If a
@@ -830,16 +835,6 @@ CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			matches, even though they don't complete the word.
 			Thus a word can be completely replaced.
 
-			For an example, imagine the 'thesaurus' file has a
-			line like this: >
-				angry furious mad enraged
-<			Placing the cursor after the letters "ang" and typing
-			CTRL-X CTRL-T would complete the word "angry";
-			subsequent presses would change the word to "furious",
-			"mad" etc.
-			Other uses include translation between two languages,
-			or grouping API functions by keyword.
-
 	CTRL-T	or
 	CTRL-N		Search forward for next matching keyword.  This
 			keyword replaces the previous matching keyword.
@@ -847,6 +842,57 @@ CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 	CTRL-P		Search backwards for next matching keyword.  This
 			keyword replaces the previous matching keyword.
 
+In the file used by the 'thesaurus' option each line in the file should
+contain words with similar meaning, separated by non-keyword characters (white
+space is preferred).  Maximum line length is 510 bytes.
+
+For an example, imagine the 'thesaurus' file has a line like this: >
+	angry furious mad enraged
+<Placing the cursor after the letters "ang" and typing CTRL-X CTRL-T would
+complete the word "angry"; subsequent presses would change the word to
+"furious", "mad" etc.
+
+Other uses include translation between two languages, or grouping API
+functions by keyword.
+
+An English word list was added to this github issue:
+https://github.com/vim/vim/issues/629#issuecomment-443293282
+Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
+~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file name.
+
+					
+Completing keywords with 'thesaurusfunc'		*compl-thesaurusfunc*
+
+If the 'thesaurusfunc' option is set, then the user specified function is
+invoked to get the list of completion matches and the 'thesaurus' option is
+not used. See |complete-functions| for an explanation of how the function is
+invoked and what it should return.
+
+Here is an example that uses the "aiksaurus" command (provided by Magnus
+Groß): >
+
+    func Thesaur(findstart, base)
+      if a:findstart
+    	return searchpos('\<', 'bnW', line('.'))[1] - 1
+      endif
+      let res = []
+      let h = ''
+      for l in systemlist('aiksaurus '.shellescape(a:base))
+	if l[:3] == '=== '
+	  let h = '('.substitute(l[4:], ' =*$', ')', '')
+	elseif l ==# 'Alphabetically similar known words are: '
+	  let h = "\U0001f52e"
+	elseif l[0] =~ '\a' || (h ==# "\U0001f52e" && l[0] ==# "\t")
+	  call extend(res, map(split(substitute(l, '^\t', '', ''), ', '), {_, val -> {'word': val, 'menu': h}}))
+	endif
+      endfor
+      return res
+    endfunc
+    
+    if exists('+thesaurusfunc')
+      set thesaurusfunc=Thesaur
+    endif
+
 
 Completing keywords in the current and included files	*compl-keyword*
 
@@ -1042,9 +1088,15 @@ CTRL-P			Find previous match for words that start with the
 			other contexts unless a double CTRL-X is used.
 
 
+Stop completion						*compl-stop*
+
+							*i_CTRL-X_CTRL-Z*
+CTRL-X CTRL-Z		Stop completion without changing the text.
+
+
 FUNCTIONS FOR FINDING COMPLETIONS			*complete-functions*
 
-This applies to 'completefunc' and 'omnifunc'.
+This applies to 'completefunc', 'thesaurusfunc' and 'omnifunc'.
 
 The function is called in two different ways:
 - First the function is called to find the start of the text to be completed.
@@ -1194,7 +1246,7 @@ match to the total list.  These matches should then not appear in the returned
 list!  Call |complete_check()| now and then to allow the user to press a key
 while still searching for matches.  Stop searching when it returns non-zero.
 
-							*E839* *E840*
+							*E840*
 The function is allowed to move the cursor, it is restored afterwards.
 The function is not allowed to move to another window or delete text.
 

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 8.2.  Last change: 2020 Dec 29
+*intro.txt*     For Vim version 8.2.  Last change: 2021 Sep 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -421,7 +421,6 @@ notation	meaning		    equivalent	decimal value(s)	~
 <Tab>		tab			CTRL-I	  9	*tab* *Tab*
 							*linefeed*
 <NL>		linefeed		CTRL-J	 10 (used for <Nul>)
-<FF>		formfeed		CTRL-L	 12	*formfeed*
 <CR>		carriage return		CTRL-M	 13	*carriage-return*
 <Return>	same as <CR>				*<Return>*
 <Enter>		same as <CR>				*<Enter>*

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.2.  Last change: 2021 May 16
+*map.txt*       For Vim version 8.2.  Last change: 2021 Oct 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1004,6 +1004,9 @@ Also note that the 'clipboard' option is temporarily emptied to avoid
 clobbering the `"*` or `"+` registers, if its value contains the item `unnamed`
 or `unnamedplus`.
 
+The `mode()` function will return the state as it will be after applying the
+operator.
+
 ==============================================================================
 2. Abbreviations			*abbreviations* *Abbreviations*
 
@@ -1368,6 +1371,10 @@ See |:verbose-cmd| for more information.
 :delc[ommand] {cmd}				*:delc* *:delcommand* *E184*
 			Delete the user-defined command {cmd}.
 
+:delc[ommand] -buffer {cmd}					*E1237*
+			Delete the user-defined command {cmd} that was defined
+			for the current buffer.
+
 :comc[lear]						*:comc* *:comclear*
 			Delete all user-defined commands.
 
@@ -1562,6 +1569,9 @@ There are some special cases as well:
 	-register   The first argument to the command can be an optional
 		    register name (like :del, :put, :yank).
 	-buffer	    The command will only be available in the current buffer.
+	-keepscript Do not use the location of where the user command was
+		    defined for verbose messages, use the location of where
+		    the user command was invoked.
 
 In the cases of the -count and -register attributes, if the optional argument
 is supplied, it is removed from the argument list and is available to the
@@ -1571,6 +1581,20 @@ feature.  Use the full name for new scripts.
 
 
 Replacement text ~
+							*:command-repl*
+The {repl} argument is normally one long string, possibly with "|" separated
+commands.  A special case is when the argument is "{", then the following
+lines, up to a line starting with "}" are used and |Vim9| syntax applies.
+Example: >
+	:command MyCommand {
+		echo 'hello'
+		g:calledMyCommand = true
+	    }
+<							*E1231*
+There must be white space before the "{".  No nesting is supported, inline
+functions cannot be used.  Commands where a "|" may appear in the argument,
+such as commands with an expression argument, cannot be followed by a "|" and
+another command.
 
 The replacement text {repl} for a user defined command is scanned for special
 escape sequences, using <...> notation.  Escape sequences are replaced with

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 8.2.  Last change: 2021 Apr 05
+*mbyte.txt*     For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.
@@ -1132,7 +1132,7 @@ This file explains what characters are available in UTF-8 and CP1255 encodings,
 and what the keymaps are to get those characters:
 
 glyph   encoding	   keymap ~
-Char   utf-8 cp1255  hebrew  hebrewp  name ~
+Char UTF-8 cp1255  hebrew  hebrewp  name ~
 א    0x5d0  0xe0     t	      a     'alef
 ב    0x5d1  0xe1     c	      b     bet
 ג    0x5d2  0xe2     d	      g     gimel
@@ -1185,11 +1185,11 @@ Vowel marks and special punctuation:
 ױ    0x5f1  0xd5     VY      VY   vav-yod
 ײ    0x5f2  0xd6     YY      YY   yod-yod
 
-The following are only available in utf-8
+The following are only available in UTF-8
 
 Cantillation marks:
 glyph
-Char utf-8 hebrew name
+Char UTF-8 hebrew name
 ב֑    0x591   C:   etnahta
 ב֒    0x592   Cs   segol
 ב֓    0x593   CS   shalshelet
@@ -1300,7 +1300,7 @@ ASCII.   On MS-Windows UTF-16 is also used (previously UCS-2), which uses
 internally.
 
 Vim has comprehensive UTF-8 support.  It works well in:
-- xterm with utf-8 support enabled
+- xterm with UTF-8 support enabled
 - Athena, Motif and GTK GUI
 - MS-Windows GUI
 - several other platforms
@@ -1313,13 +1313,13 @@ is no longer relevant in the GTK+ 2 GUI.
 							*bom-bytes*
 When reading a file a BOM (Byte Order Mark) can be used to recognize the
 Unicode encoding:
-	EF BB BF     utf-8
-	FE FF        utf-16 big endian
-	FF FE        utf-16 little endian
-	00 00 FE FF  utf-32 big endian
-	FF FE 00 00  utf-32 little endian
+	EF BB BF     UTF-8
+	FE FF        UTF-16 big endian
+	FF FE        UTF-16 little endian
+	00 00 FE FF  UTF-32 big endian
+	FF FE 00 00  UTF-32 little endian
 
-Utf-8 is the recommended encoding.  Note that it's difficult to tell utf-16
+UTF-8 is the recommended encoding.  Note that it's difficult to tell utf-16
 and utf-32 apart.  Utf-16 is often used on MS-Windows, utf-32 is not
 widespread as file format.
 
@@ -1365,8 +1365,8 @@ Useful commands:
 
 STARTING VIM
 
-If your current locale is in an utf-8 encoding, Vim will automatically start
-in utf-8 mode.
+If your current locale is in an UTF-8 encoding, Vim will automatically start
+in UTF-8 mode.
 
 If you are using another locale: >
 
@@ -1399,10 +1399,10 @@ Motif.  Use the ":hi Menu font={fontname}" command for this. |:highlight|
 TYPING UTF-8						*utf-8-typing*
 
 If you are using X-Windows, you should find an input method that supports
-utf-8.
+UTF-8.
 
-If your system does not provide support for typing utf-8, you can use the
-'keymap' feature.  This allows writing a keymap file, which defines a utf-8
+If your system does not provide support for typing UTF-8, you can use the
+'keymap' feature.  This allows writing a keymap file, which defines a UTF-8
 character as a sequence of ASCII characters.  See |mbyte-keymap|.
 
 Another method is to set the current locale to the language you want to use

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 8.2.  Last change: 2020 Dec 29
+*message.txt*   For Vim version 8.2.  Last change: 2021 Jul 31
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -141,6 +141,11 @@ larger.  When it's more there probably is an endless loop.  Probably a
 The color name {name} is unknown.  See |gui-colors| for a list of colors that
 are available on most systems.
 
+							*E1244*  >
+  Bad color string: {str}
+
+The provided color did not conform to the pattern #rrggbb
+
 							*E458*  >
   Cannot allocate colormap entry, some colors may be incorrect
 
@@ -774,6 +779,14 @@ a user-defined command.
 This can only happen when changing the source code, when adding a command in
 src/ex_cmds.h.  The lookup table then needs to be updated, by running: >
 	make cmdidxs
+<
+						*E928* *E889* *E839*  >
+  E928: String required
+  E889: Number required
+  E839: Bool required
+
+These happen when a value or expression is used that does not have the
+expected type.
 
 ==============================================================================
 3. Messages						*messages*

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.2.  Last change: 2021 Jun 20
+*options.txt*	For Vim version 8.2.  Last change: 2021 Nov 06
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -195,11 +195,18 @@ include the "|" in the option value, use "\|" instead.  This example sets the
 This sets the 'titlestring' option to "hi" and 'iconstring' to "there": >
    :set titlestring=hi|set iconstring=there
 
-Similarly, the double quote character starts a comment.  To include the '"' in
-the option value, use '\"' instead.  This example sets the 'titlestring'
-option to 'hi "there"': >
+Similarly, in legacy script the double quote character starts a comment.  To
+include the '"' in the option value, use '\"' instead.  This example sets the
+'titlestring' option to 'hi "there"': >
    :set titlestring=hi\ \"there\"
 
+In |Vim9| script it's simpler, comments start with a '#' character, and only
+when preceded by white space.  A backslash is needed less often: >
+   vim9script
+   set titlestring=hi\ "there"
+   set titlestring=hi#there#
+   set titlestring=hi\ \#there#
+
 For Win32 backslashes in file names are mostly not removed.  More precise: For
 options that expect a file name (those where environment variables are
 expanded) a backslash before a normal file name character is not removed.  But
@@ -541,6 +548,15 @@ chance that a normal word like "lex:" is caught.  There is one exception:
 version 3.0).  Using "ex:" at the start of the line will be ignored (this
 could be short for "example:").
 
+If the modeline is disabled within a modeline, subsequent modelines will be
+ignored.  This is to allow turning off modeline on a per-file basis.  This is
+useful when a line looks like a modeline but isn't.  For example, it would be
+good to start a YAML file containing strings like "vim:" with
+    # vim: nomodeline ~
+so as to avoid modeline misdetection.  Following options on the same line
+after modeline deactivation, if any, are still evaluated (but you would
+normally not have any).
+
 							*modeline-local*
 The options are set like with ":setlocal": The new value only applies to the
 buffer and window that contain the file.  Although it's possible to set global
@@ -701,7 +717,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	"double":	Use twice the width of ASCII characters.
 							*E834* *E835*
 	The value "double" cannot be used if 'listchars' or 'fillchars'
-	contains a character that would be double width.
+	contains a character that would be double width.  These errors may
+	also be given when calling setcellwidths().
 
 	The values are overruled for characters specified with
 	|setcellwidths()|.
@@ -1326,9 +1343,11 @@ A jump table for the options with a short description can be found at |Q_op|.
 			    continuation (positive).
 		sbr	    Display the 'showbreak' value before applying the
 			    additional indent.
-		list:{n}    Adds an additional indent for lines that match a 
+		list:{n}    Adds an additional indent for lines that match a
 			    numbered or bulleted list (using the
 			    'formatlistpat' setting).
+		list:-1	    Uses the length of a match with 'formatlistpat'
+			    for indentation.
 	The default value for min is 20, shift and list is 0.
 
 						*'browsedir'* *'bsdir'*
@@ -1401,6 +1420,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Also see |win_gettype()|, which returns the type of the window.
 
 	Be careful with changing this option, it can have many side effects!
+	One such effect is that Vim will not check the timestamp of the file,
+	if the file is changed by another program this will not be noticed.
 
 	A "quickfix" buffer is only used for the error list and the location
 	list.  This value is set by the |:cwindow| and |:lwindow| commands and
@@ -2392,7 +2413,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   xchacha20	XChaCha20 Cipher with Poly1305 Message Authentication
 			Code.  Medium strong till strong encryption.
 			Encryption is provided by the libsodium library, it
-			requires Vim to be built with |+sodium|
+			requires Vim to be built with |+sodium|.
 			It adds a seed and a message authentication code (MAC)
 			to the file.  This needs at least a Vim 8.2.3022 to
 			read the encrypted file.
@@ -3592,8 +3613,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	systems without an fsync() implementation, this variable is always
 	off.
 	Also see 'swapsync' for controlling fsync() on swap files.
-	'fsync' also applies to |writefile()|, unless a flag is used to
-	overrule it.
+	'fsync' also applies to |writefile()| (unless a flag is used to
+	overrule it) and when writing undo files (see |undo-persistence|).
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
@@ -3772,6 +3793,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	screen.  Set it to a negative value to allow windows taller than the
 	screen.
 
+						*'guiligatures'* *'gli'* *E1243*
+'guiligatures' 'gli'	string	(default "")
+			global
+			{only for GTK GUI}
+	List of ASCII characters that, when combined together, can create more
+	complex shapes. Each character must be a printable ASCII character
+	with a value in the 32-127 range.
+	Example: >
+		:set guiligatures=!\"#$%&()*+-./:<=>?@[]^_{\|~
+<	Changing this option updates screen output immediately. Set it to an
+	empty string to disable ligatures.
+
 						*'guioptions'* *'go'*
 'guioptions' 'go'	string	(default "egmrLtT"   (MS-Windows,
 					   "t" is removed in |defaults.vim|),
@@ -4875,9 +4908,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'list'* *'nolist'*
 'list'			boolean	(default off)
 			local to window
-	List mode: Show tabs as CTRL-I is displayed, display $ after end of
-	line.  Useful to see the difference between tabs and spaces and for
-	trailing blanks.  Further changed by the 'listchars' option.
+	List mode: By default show tabs as CTRL-I is displayed, display $
+	after end of line.  Useful to see the difference between tabs and
+	spaces and for trailing blanks.  Further changed by the 'listchars'
+	option.
 
 	The cursor is displayed at the start of the space a Tab character
 	occupies, not at the end as usual in Normal mode.  To get this cursor
@@ -4921,16 +4955,25 @@ A jump table for the options with a short description can be found at |Q_op|.
 							*lcs-space*
 	  space:c	Character to show for a space.  When omitted, spaces
 			are left blank.
+							*lcs-multispace*
+	  multispace:c...
+	 		One or more characters to use cyclically to show for
+	 		multiple consecutive spaces.  Overrides the "space"
+			setting, except for single spaces.  When omitted, the
+			"space" setting is used.  For example,
+			`:set listchars=multispace:---+` shows ten consecutive
+			spaces as:
+				---+---+--
 							*lcs-lead*
 	  lead:c	Character to show for leading spaces.  When omitted,
-			leading spaces are blank.  Overrides the "space"
-			setting for leading spaces.  You can combine it with
-			"tab:", for example: >
+			leading spaces are blank.  Overrides the "space" and
+			"multispace" settings for leading spaces.  You can
+			combine it with "tab:", for example: >
 				:set listchars+=tab:>-,lead:.
 <							*lcs-trail*
 	  trail:c	Character to show for trailing spaces.  When omitted,
-			trailing spaces are blank.  Overrides the "space"
-			setting for trailing spaces.
+			trailing spaces are blank.  Overrides the "space" and
+			"multispace" settings for trailing spaces.
 							*lcs-extends*
 	  extends:c	Character to show in the last column, when 'wrap' is
 			off and the line continues beyond the right of the
@@ -4951,12 +4994,20 @@ A jump table for the options with a short description can be found at |Q_op|.
 	be used when 'encoding' is "utf-8", otherwise only printable
 	characters are allowed.  All characters must be single width.
 
+	Each character can be specified as hex: >
+		set listchars=eol:\\x24
+		set listchars=eol:\\u21b5
+		set listchars=eol:\\U000021b5
+<	Note that a double backslash is used.  The number of hex characters
+	must be exactly 2 for \\x, 4 for \\u and 8 for \\U.
+
 	Examples: >
 	    :set lcs=tab:>-,trail:-
 	    :set lcs=tab:>-,eol:<,nbsp:%
 	    :set lcs=extends:>,precedes:<
 <	The "NonText" highlighting will be used for "eol", "extends" and
-	"precedes".  "SpecialKey" for "nbsp", "space", "tab" and "trail".
+	"precedes".  "SpecialKey" will be used for "tab", "nbsp", "space",
+	"multispace", "lead" and "trail".
 	|hl-NonText| |hl-SpecialKey|
 
 			*'lpl'* *'nolpl'* *'loadplugins'* *'noloadplugins'*
@@ -7158,6 +7209,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	If the name "cjk" is included East Asian characters are excluded from
 	spell checking.  This is useful when editing text that also has Asian
 	words.
+	Note that the "medical" dictionary does not exist, it is just an
+	example of a longer name.
 							*E757*
 	As a special case the name of a .spl file can be given as-is.  The
 	first "_xx" in the name is removed and used as the region name
@@ -7376,13 +7429,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 	      return value of expr contains % items they will get expanded.
 	      The expression can contain the } character, the end of
 	      expression is denoted by %}.
-	      The For example: >
+	      For example: >
 		func! Stl_filename() abort
 		    return "%t"
 		endfunc
 <	        `stl=%{Stl_filename()}`   results in `"%t"`
 	        `stl=%{%Stl_filename()%}` results in `"Name of current file"`
-	} -   End of `{%` expression
+	%} -  End of `{%` expression
 	( -   Start of item group.  Can be used for setting the width and
 	      alignment of a section.  Must be followed by %) somewhere.
 	) -   End of item group.  No width fields allowed.
@@ -7888,6 +7941,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Number of scrollback lines to keep.  When going over this limit the
 	first 10% of the scrollback lines are deleted.  This is just to reduce
 	the memory usage.  See |Terminal-Normal|.
+	Also used as a limit for text sent to the terminal in one write,
+	multiplied by the number of columns times 3 (average number of bytes
+	per cell).
 
 						*'termwinsize'* *'tws'*
 'termwinsize' 'tws'	string	(default "")
@@ -7978,25 +8034,30 @@ A jump table for the options with a short description can be found at |Q_op|.
 'thesaurus' 'tsr'	string	(default "")
 			global or local to buffer |global-local|
 	List of file names, separated by commas, that are used to lookup words
-	for thesaurus completion commands |i_CTRL-X_CTRL-T|.
+	for thesaurus completion commands |i_CTRL-X_CTRL-T|.  See
+	|compl-thesaurus|.
 
-	Each line in the file should contain words with similar meaning,
-	separated by non-keyword characters (white space is preferred).
-	Maximum line length is 510 bytes.
-
-	An English word list was added to this github issue:
-	https://github.com/vim/vim/issues/629#issuecomment-443293282
-	Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
-	~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file
-	name.
+	This option is not used if 'thesaurusfunc' is set, either for the
+	buffer or globally.
 
 	To include a comma in a file name precede it with a backslash.  Spaces
 	after a comma are ignored, otherwise spaces are included in the file
-	name.  See |option-backslash| about using backslashes.
-	The use of |:set+=| and |:set-=| is preferred when adding or removing
-	directories from the list.  This avoids problems when a future version
-	uses another default.
-	Backticks cannot be used in this option for security reasons.
+	name.  See |option-backslash| about using backslashes.  The use of
+	|:set+=| and |:set-=| is preferred when adding or removing directories
+	from the list.  This avoids problems when a future version uses
+	another default.  Backticks cannot be used in this option for security
+	reasons.
+
+						*'thesaurusfunc'* *tsrfu'*
+'thesaurusfunc' 'tsrfu'	string	(default: empty)
+			global or local to buffer |global-local|
+			{not available when compiled without the |+eval|
+			feature}
+	This option specifies a function to be used for thesaurus completion
+	with CTRL-X CTRL-T. |i_CTRL-X_CTRL-T| See |compl-thesaurusfunc|.
+
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
 
 			     *'tildeop'* *'top'* *'notildeop'* *'notop'*
 'tildeop' 'top'		boolean	(default off)
@@ -8641,12 +8702,16 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 					    *'virtualedit'* *'ve'*
 'virtualedit' 've'	string	(default "")
-			global
+			global or local to window |global-local|
 	A comma separated list of these words:
 	    block	Allow virtual editing in Visual block mode.
 	    insert	Allow virtual editing in Insert mode.
 	    all		Allow virtual editing in all modes.
 	    onemore	Allow the cursor to move just past the end of the line
+	    none	When used as the local value, do not allow virtual
+			editing even when the global value is set.  When used
+			as the global value, "none" is the same as "".
+	    NONE	Alternative spelling of "none".
 
 	Virtual editing means that the cursor can be positioned where there is
 	no actual character.  This can be halfway into a tab or beyond the end
@@ -8663,6 +8728,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The `g$` command will move to the end of the screen line.
 	It doesn't make sense to combine "all" with "onemore", but you will
 	not get a warning for it.
+	When combined with other words, "none" is ignored.
 	NOTE: This option is set to "" when 'compatible' is set.
 
 			*'visualbell'* *'vb'* *'novisualbell'* *'novb'* *beep*
@@ -8746,8 +8812,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	More info here: |cmdline-completion|.
 	The character is not recognized when used inside a macro.  See
 	'wildcharm' for that.
+	Some keys will not work, such as CTRL-C, <CR> and Enter.
 	Although 'wc' is a number option, you can set it to a special key: >
-		:set wc=<Esc>
+		:set wc=<Tab>
 <	NOTE: This option is set to the Vi default value when 'compatible' is
 	set and to the Vim default value when 'compatible' is reset.
 

runtime/doc/os_haiku.txt

@@ -194,9 +194,8 @@ $VIM/macros/swapmous.vim for an example.		|gui-mouse-mapping|
 
 11. Color names						*haiku-colors*
 
-Vim has a number of color names built-in.  Additional names are read from the
-file $VIMRUNTIME/rgb.txt, if present.  This file is basically the color
-database from X.  Names used from this file are cached for efficiency.
+Vim has a number of color names built-in. Additional names can be defined in
+|v:colornames|. See |:colorscheme| for details.
 
 
 12. GUI Toolbar Images					*haiku-toolbar-images*

runtime/doc/os_win32.txt

@@ -18,7 +18,8 @@ The 32 bit version also runs on 64 bit MS-Windows systems.
 4. Using the mouse		|win32-mouse|
 5. Running under Windows 95	|win32-win95|
 6. Running under Windows 3.1	|win32-win3.1|
-7. Win32 mini FAQ		|win32-faq|
+7. Installation package		|win32-installer|
+8. Win32 mini FAQ		|win32-faq|
 
 Additionally, there are a number of common Win32 and DOS items:
 File locations			|dos-locations|
@@ -175,7 +176,29 @@ There was a special version of gvim that runs under Windows 3.1 and 3.11.
 Support was removed in patch 7.4.1364.
 
 ==============================================================================
-7. Win32 mini FAQ					*win32-faq*
+7. Installation package					*win32-installer*
+
+A simple installer for windows is available at http://www.vim.org/download.php
+(stable version) and nightly builds are also available at
+https://github.com/vim/vim-win32-installer/releases/
+
+The nightly builds include 32bit and 64bit builds, have most features enabled
+and usually also contain an extra cryptographic signed installer, so Windows
+will not complain.
+
+To use the installer, simply run the exe file.  The following switches are
+also supported: >
+
+    gvim_<version>.exe /S           -> silent install without any dialogues
+    gvim_<version>.exe /D=C:\vim    -> Install into directory c:\vim
+                                    -> /D must be the last argument
+    gvim_<version>.exe /S /D=c:\vim -> silent install into c:\vim
+<
+The default installation directory can alternatively be given by setting the
+$VIM environment variable.
+
+==============================================================================
+8. Win32 mini FAQ					*win32-faq*
 
 Q. How do I change the font?
 A. In the GUI version, you can use the 'guifont' option.  Example: >

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 8.2.  Last change: 2021 May 02
+*pattern.txt*   For Vim version 8.2.  Last change: 2021 Jul 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -932,11 +932,11 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.l    Matches at the cursor line.
 \%<.l   Matches above the cursor line.
 \%>.l   Matches below the cursor line.
-	These three can be used to match specific lines in a buffer.  The "23"
+	These six can be used to match specific lines in a buffer.  The "23"
 	can be any line number.  The first line is 1.
 	WARNING: When inserting or deleting lines Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
-	wrong.  Also when refering to the cursor position (".") and
+	wrong.  Also when referring to the cursor position (".") and
 	the cursor moves the display isn't updated for this change.  An update
 	is done when using the |CTRL-L| command (the whole screen is updated).
 	Example, to highlight the line where the cursor currently is: >
@@ -953,16 +953,15 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.c    Matches at the cursor column.
 \%<.c   Matches before the cursor column.
 \%>.c   Matches after the cursor column.
-	These three can be used to match specific columns in a buffer or
-	string.  The "23" can be any column number.  The first column is 1.
-	Actually, the column is the byte number (thus it's not exactly right
-	for multibyte characters).
+	These six can be used to match specific columns in a buffer or string.
+	The "23" can be any column number.  The first column is 1.  Actually,
+	the column is the byte number (thus it's not exactly right for
+	multibyte characters).
 	WARNING: When inserting or deleting text Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
-	wrong.  Also when refering to the cursor position (".") and
+	wrong.  Also when referring to the cursor position (".") and
 	the cursor moves the display isn't updated for this change.  An update
 	is done when using the |CTRL-L| command (the whole screen is updated).
-
 	Example, to highlight the column where the cursor currently is: >
 		:exe '/\%' . col(".") . 'c'
 <	Alternatively use: >
@@ -980,8 +979,8 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.v    Matches at the current virtual column.
 \%<.v   Matches before the current virtual column.
 \%>.v   Matches after the current virtual column.
-	These three can be used to match specific virtual columns in a buffer
-	or string.  When not matching with a buffer in a window, the option
+	These six can be used to match specific virtual columns in a buffer or
+	string.  When not matching with a buffer in a window, the option
 	values of the current window are used (e.g., 'tabstop').
 	The "23" can be any column number.  The first column is 1.
 	Note that some virtual column positions will never match, because they
@@ -989,7 +988,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	one screen character.
 	WARNING: When inserting or deleting text Vim does not automatically
 	update highlighted matches.  This means Syntax highlighting quickly
-	becomes wrong.  Also when refering to the cursor position (".") and
+	becomes wrong.  Also when referring to the cursor position (".") and
 	the cursor moves the display isn't updated for this change.  An update
 	is done when using the |CTRL-L| command (the whole screen is updated).
 	Example, to highlight all the characters after virtual column 72: >
@@ -1012,7 +1011,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 		/.*\%17v
 <	Column 17 is highlighted by 'hlsearch' because there is another match
 	where ".*" matches zero characters.
-<
+
 
 Character classes:
 \i	identifier character (see 'isident' option)	*/\i*
@@ -1472,7 +1471,8 @@ criteria:
     - The number of characters (distance) between two consecutive matching
       characters.
     - Matches at the beginning of a word
-    - Matches after a camel case character or a path separator or a hyphen.
+    - Matches at a camel case character (e.g. Case in CamelCase)
+    - Matches after a path separator or a hyphen.
     - The number of unmatched characters in a string.
 The matching string with the highest score is returned first.
 

runtime/doc/pi_netrw.txt

@@ -1,4 +1,4 @@
-*pi_netrw.txt*  For Vim version 8.2.  Last change: 2020 Sep 19
+*pi_netrw.txt*  For Vim version 8.2.  Last change: 2021 Aug 16
 
 	    ------------------------------------------------
 	    NETRW REFERENCE MANUAL    by Charles E. Campbell
@@ -54,6 +54,7 @@ Copyright: Copyright (C) 2017 Charles E Campbell    *netrw-copyright*
       Browsing With A Horizontally Split Window...........|netrw-o|
       Browsing With A New Tab.............................|netrw-t|
       Browsing With A Vertically Split Window.............|netrw-v|
+      Change File Permission..............................|netrw-gp|
       Change Listing Style.(thin wide long tree)..........|netrw-i|
       Changing To A Bookmarked Directory..................|netrw-gb|
       Changing To A Predecessor Directory.................|netrw-u|
@@ -1095,6 +1096,7 @@ QUICK REFERENCE: MAPS				*netrw-browse-maps* {{{2
 	   gf	Force treatment as file                              |netrw-gf|
 	   gh	Quick hide/unhide of dot-files                       |netrw-gh|
 	   gn	Make top of tree the directory below the cursor      |netrw-gn|
+	   gp	Change local-only file permissions                   |netrw-gp|
 	   i	Cycle between thin, long, wide, and tree listings    |netrw-i|
 	   I	Toggle the displaying of the banner                  |netrw-I|
 	   mb	Bookmark current directory                           |netrw-mb|
@@ -1510,6 +1512,8 @@ Netrw determines which special handler by the following method:
     If g:netrw_browsex_viewer == '-', then netrwFileHandlers#Invoke() will be
     used instead (see |netrw_filehandler|).
 
+    If the viewer you wish to use does not support handling of a remote URL
+    directory, set |g:netrw_browsex_support_remote| to 0.
   * for Windows 32 or 64, the URL and FileProtocolHandler dlls are used.
   * for Gnome (with gnome-open): gnome-open is used.
   * for KDE (with kfmclient)   : kfmclient is used
@@ -2104,8 +2108,8 @@ the two directories the same, use the "cd" map (type cd).  That map will
 set Vim's notion of the current directory to netrw's current browsing
 directory.
 
-|netrw-cd|: This map's name was changed from "c" to cd (see |netrw-cd|).
-          This change was done to allow for |netrw-cb| and |netrw-cB| maps.
+|netrw-cd| : This map's name was changed from "c" to cd (see |netrw-cd|).
+           This change was done to allow for |netrw-cb| and |netrw-cB| maps.
 
 Associated setting variable: |g:netrw_keepdir|
 
@@ -2607,13 +2611,29 @@ your browsing preferences.  (see also: |netrw-settings|)
 				a script/function to handle the given
 				extension.  (see |netrw_filehandler|).
 
+  *g:netrw_browsex_support_remote*
+				specify if the specified viewer supports a
+				remote URL.  (see |netrw-handler|).
+
   *g:netrw_chgperm*		Unix/Linux: "chmod PERM FILENAME"
 				Windows:    "cacls FILENAME /e /p PERM"
 				Used to change access permission for a file.
 
+  *g:netrw_clipboard*		=1
+  				By default, netrw will attempt to insure that
+				the clipboard's values will remain unchanged.
+				However, some users report that they have
+				speed problems with this; consequently, this
+				option, when set to zero,  lets such users
+				prevent netrw from saving and restoring the
+				clipboard (the latter is done only as needed).
+				That means that if the clipboard is changed
+				(inadvertently) by normal netrw operation that
+				it will not be restored to its prior state.
+
   *g:netrw_compress*		="gzip"
-				    Will compress marked files with this
-				    command
+				Will compress marked files with this
+				command
 
   *g:Netrw_corehandler*		Allows one to specify something additional
 				to do when handling <core> files via netrw's
@@ -2639,12 +2659,23 @@ your browsing preferences.  (see also: |netrw-settings|)
 				 =2        cul u-cuc        cul u-cuc
 				 =3        cul u-cuc        cul   cuc
 				 =4        cul   cuc        cul   cuc
+				 =5      U-cul U-cuc      U-cul U-cuc
+				 =6      U-cul U-cuc        cul U-cuc
+				 =7        cul U-cuc        cul U-cuc
+				 =8        cul U-cuc        cul   cuc
 
 				Where
-				  u-cul : user's |'cursorline'|   setting used
-				  u-cuc : user's |'cursorcolumn'| setting used
-				  cul   : |'cursorline'|  locally set
-				  cuc   : |'cursorcolumn'| locally set
+				  u-cul : user's |'cursorline'|   initial setting used
+				  u-cuc : user's |'cursorcolumn'| initial setting used
+				  U-cul : user's |'cursorline'|   current setting used
+				  U-cuc : user's |'cursorcolumn'| current setting used
+				  cul   : |'cursorline'|   will be locally set
+				  cuc   : |'cursorcolumn'| will be locally set
+
+				  The "initial setting" means the values of
+				  the |'cuc'| and |'cul'| settings in effect when
+				  netrw last saw |g:netrw_cursor| >= 5 or when
+				  netrw was initially run.
 
   *g:netrw_decompress*		= { ".gz"  : "gunzip" ,
 				    ".bz2" : "bunzip2" ,
@@ -2654,7 +2685,7 @@ your browsing preferences.  (see also: |netrw-settings|)
 				  decompression programs.
 
   *g:netrw_dirhistmax*            =10: controls maximum quantity of past
-                                     history.  May be zero to supppress
+                                     history.  May be zero to suppress
 				     history.
 				     (related: |netrw-qb| |netrw-u| |netrw-U|)
 
@@ -3142,6 +3173,9 @@ To open a new file in netrw's current directory, press "%".  This map
 will query the user for a new filename; an empty file by that name will
 be placed in the netrw's current directory (ie. b:netrw_curdir).
 
+If Lexplore (|netrw-:Lexplore|) is in use, the new file will be generated
+in the |g:netrw_chgwin| window.
+
 Related topics:               |netrw-d|
 
 
@@ -3809,7 +3843,7 @@ netrw:
 	  Decho.vim is provided as a "vimball"; see |vimball-intro|.  You
 	  should edit the Decho.vba.gz file and source it in: >
 
-		vim Decho.vba.gz
+	  	vim Decho.vba.gz
 		:so %
 		:q
 <
@@ -3877,6 +3911,32 @@ netrw:
 ==============================================================================
 12. History						*netrw-history* {{{1
 
+	v171:	Oct 09, 2020	* included code in s:NetrwOptionsSafe()
+				  to allow |'bh'| to be set to delete when
+				  rather than hide when g:netrw_fastbrowse
+				  was zero.
+				* Installed |g:netrw_clipboard| setting
+				* Installed option bypass for |'guioptions'|
+				  a/A settings
+				* Changed popup_beval() to |popup_atcursor|()
+				  in netrw#ErrorMsg (lacygoill). Apparently
+				  popup_beval doesn't reliably close the
+				  popup when the mouse is moved.
+				* VimEnter() now using win_execute to examine
+				  buffers for an attempt to open a directory.
+				  Avoids issues with popups/terminal from
+				  command line. (lacygoill)
+		Jun 28, 2021	* (zeertzjq) provided a patch for use of
+				  xmap,xno instead of vmap,vno in
+				  netrwPlugin.vim. Avoids entanglement with
+				  select mode.
+		Jul 14, 2021	* Fixed problem addressed by tst976; opening
+				  a file using tree mode, going up a
+				  directory, and opening a file there was
+				  opening the file in the wrong directory.
+		Jul 28, 2021	* (Ingo Karkat) provided a patch fixing an
+				  E488 error with netrwPlugin.vim
+				  (occurred for vim versions < 8.02)
 	v170:	Mar 11, 2020	* (reported by Reiner Herrmann) netrw+tree
 				  would not hide with the ^\..* pattern
 				  correctly.
@@ -3893,7 +3953,7 @@ netrw:
 		Jun 07, 2020	* (reported by Jo Totland) repeatedly invoking
 				  :Lexplore and quitting it left unused
 				  hidden buffers.  Netrw will now set netrw
-				  buffers created by :Lexplore to |bh|=wipe.
+				  buffers created by :Lexplore to |'bh'|=wipe.
 	v169:	Dec 20, 2019	* (reported by amkarthik) that netrw's x
 				  (|netrw-x|) would throw an error when
 				  attempting to open a local directory.

runtime/doc/popup.txt

@@ -1,4 +1,4 @@
-*popup.txt*  For Vim version 8.2.  Last change: 2021 Feb 21
+*popup.txt*  For Vim version 8.2.  Last change: 2021 Aug 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -260,6 +260,7 @@ popup_close({id} [, {result}])				*popup_close()*
 		Can also be used as a |method|: >
 			GetPopup()->popup_close()
 
+
 popup_create({what}, {options})				*popup_create()*
 		Open a popup window showing {what}, which is either:
 		- a buffer number
@@ -284,6 +285,7 @@ popup_create({what}, {options})				*popup_create()*
 		Can also be used as a |method|: >
 			GetText()->popup_create({})
 
+
 popup_dialog({what}, {options})				*popup_dialog()*
 		Just like |popup_create()| but with these default options: >
 			call popup_create({what}, #{
@@ -307,6 +309,7 @@ popup_dialog({what}, {options})				*popup_dialog()*
 		Can also be used as a |method|: >
 			GetText()->popup_dialog({})
 
+
 popup_filter_menu({id}, {key})				*popup_filter_menu()*
 		Filter that can be used for a popup. These keys can be used:
 		    j <Down> <C-N>	select item below
@@ -386,6 +389,7 @@ popup_getoptions({id})					*popup_getoptions()*
 		Can also be used as a |method|: >
 			GetPopup()->popup_getoptions()
 
+
 popup_getpos({id})					*popup_getpos()*
 		Return the position and size of popup {id}.  Returns a Dict
 		with these entries:
@@ -414,6 +418,7 @@ popup_getpos({id})					*popup_getpos()*
 		Can also be used as a |method|: >
 			GetPopup()->popup_getpos()
 
+
 popup_hide({id})						*popup_hide()*
 		If {id} is a displayed popup, hide it now. If the popup has a
 		filter it will not be invoked for so long as the popup is
@@ -425,6 +430,7 @@ popup_hide({id})						*popup_hide()*
 		Can also be used as a |method|: >
 			GetPopup()->popup_hide()
 
+
 popup_list()						 *popup_list()*
 		Return a List with the |window-ID| of all existing popups.
 
@@ -468,6 +474,7 @@ popup_menu({what}, {options})				 *popup_menu()*
 <		Can also be used as a |method|: >
 			GetChoices()->popup_menu({})
 
+
 popup_move({id}, {options})					*popup_move()*
 		Move popup {id} to the position specified with {options}.
 		{options} may contain the items from |popup_create()| that
@@ -486,6 +493,7 @@ popup_move({id}, {options})					*popup_move()*
 		Can also be used as a |method|: >
 			GetPopup()->popup_move(options)
 
+
 popup_notification({what}, {options})			 *popup_notification()*
 		Show the {what} for 3 seconds at the top of the Vim window.
 		This works like: >
@@ -515,12 +523,6 @@ popup_notification({what}, {options})			 *popup_notification()*
 		Can also be used as a |method|: >
 			GetText()->popup_notification({})
 
-popup_show({id})						*popup_show()*
-		If {id} is a hidden popup, show it now.
-		For {id} see `popup_hide()`.
-		If {id} is the info popup it will be positioned next to the
-		current popup menu item.
-
 
 popup_setoptions({id}, {options})			*popup_setoptions()*
 		Override options in popup {id} with entries in {options}.
@@ -557,6 +559,7 @@ popup_setoptions({id}, {options})			*popup_setoptions()*
 		Can also be used as a |method|: >
 			GetPopup()->popup_setoptions(options)
 
+
 popup_settext({id}, {text})				*popup_settext()*
 		Set the text of the buffer in popup win {id}. {text} is the
 		same as supplied to |popup_create()|, except that a buffer
@@ -567,6 +570,14 @@ popup_settext({id}, {text})				*popup_settext()*
 		Can also be used as a |method|: >
 			GetPopup()->popup_settext('hello')
 
+
+popup_show({id})						*popup_show()*
+		If {id} is a hidden popup, show it now.
+		For {id} see `popup_hide()`.
+		If {id} is the info popup it will be positioned next to the
+		current popup menu item.
+
+
 ==============================================================================
 3. Usage						*popup-usage*
 
@@ -904,6 +915,8 @@ Some recommended key actions:
 	cursor keys	select another entry
 	Tab		accept current suggestion
 
+When CTRL-C is pressed the popup is closed, the filter will not be invoked.
+
 A mouse click arrives as <LeftMouse>.  The coordinates can be obtained with
 |getmousepos()|.
 

runtime/doc/print.txt

@@ -1,4 +1,4 @@
-*print.txt*     For Vim version 8.2.  Last change: 2020 Aug 15
+*print.txt*     For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -717,7 +717,7 @@ There are a couple of points to bear in mind:
 ==============================================================================
 8. Formfeed Characters					*printing-formfeed*
 
-By default Vim does not do any special processing of |formfeed| control
+By default Vim does not do any special processing of formfeed control
 characters.  Setting the 'printoptions' formfeed item will make Vim recognize
 formfeed characters and continue printing the current line at the beginning
 of the first line on a new page.  The use of formfeed characters provides

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 8.2.  Last change: 2021 Mar 29
+*quickref.txt*  For Vim version 8.2.  Last change: 2021 Oct 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -732,6 +732,7 @@ Short explanation of each option:		*option-list*
 'guifontset'	  'gfs'     GUI: Names of multibyte fonts to be used
 'guifontwide'	  'gfw'     list of font names for double-wide characters
 'guiheadroom'	  'ghr'     GUI: pixels room for window decorations
+'guiligatures'	  'gli'	    GTK GUI: ASCII characters that can form shapes
 'guioptions'	  'go'	    GUI: Which components and options are used
 'guipty'		    GUI: try to use a pseudo-tty for ":!" commands
 'guitablabel'	  'gtl'     GUI: custom label for a tab page
@@ -948,6 +949,7 @@ Short explanation of each option:		*option-list*
 'textmode'	  'tx'	    obsolete, use 'fileformat'
 'textwidth'	  'tw'	    maximum width of text that is being inserted
 'thesaurus'	  'tsr'     list of thesaurus files for keyword completion
+'thesaurusfunc'	  'tsrfu'   function to be used for thesaurus completion
 'tildeop'	  'top'     tilde command "~" behaves like an operator
 'timeout'	  'to'	    time out on mappings and key codes
 'timeoutlen'	  'tm'	    time out time in milliseconds

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 8.2.  Last change: 2021 Jun 27
+*repeat.txt*    For Vim version 8.2.  Last change: 2021 Sep 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -893,8 +893,12 @@ DEFINING BREAKPOINTS
 		Sets a breakpoint, that will break whenever the {expression}
 		evaluates to a different value. Example: >
 			:breakadd expr g:lnum
-
 <		Will break, whenever the global variable lnum changes.
+
+		Errors in evaluation are suppressed, you can use the name of a
+		variable that does not exist yet.  This also means you will
+		not notice anything if the expression has a mistake.
+
 		Note if you watch a |script-variable| this will break
 		when switching scripts, since the script variable is only
 		valid in the script where it has been defined and if that

runtime/doc/sign.txt

@@ -451,13 +451,13 @@ sign_getdefined([{name}])				*sign_getdefined()*
 		Can also be used as a |method|: >
 			GetSignList()->sign_getdefined()
 
-sign_getplaced([{expr} [, {dict}]])			*sign_getplaced()*
+sign_getplaced([{buf} [, {dict}]])			*sign_getplaced()*
 		Return a list of signs placed in a buffer or all the buffers.
 		This is similar to the |:sign-place-list| command.
 
-		If the optional buffer name {expr} is specified, then only the
+		If the optional buffer name {buf} is specified, then only the
 		list of signs placed in that buffer is returned.  For the use
-		of {expr}, see |bufname()|. The optional {dict} can contain
+		of {buf}, see |bufname()|. The optional {dict} can contain
 		the following entries:
 		   group	select only signs in this group
 		   id		select sign with this identifier
@@ -515,12 +515,13 @@ sign_getplaced([{expr} [, {dict}]])			*sign_getplaced()*
 			GetBufname()->sign_getplaced()
 <
 							*sign_jump()*
-sign_jump({id}, {group}, {expr})
-		Open the buffer {expr} or jump to the window that contains
-		{expr} and position the cursor at sign {id} in group {group}.
+sign_jump({id}, {group}, {buf})
+		Open the buffer {buf} or jump to the window that contains
+		{buf} and position the cursor at sign {id} in group {group}.
 		This is similar to the |:sign-jump| command.
 
-		For the use of {expr}, see |bufname()|.
+		If {group} is an empty string, then the global group is used.
+		For the use of {buf}, see |bufname()|.
 
 		Returns the line number of the sign. Returns -1 if the
 		arguments are invalid.
@@ -533,9 +534,9 @@ sign_jump({id}, {group}, {expr})
 			GetSignid()->sign_jump()
 <
 							*sign_place()*
-sign_place({id}, {group}, {name}, {expr} [, {dict}])
+sign_place({id}, {group}, {name}, {buf} [, {dict}])
 		Place the sign defined as {name} at line {lnum} in file or
-		buffer {expr} and assign {id} and {group} to sign.  This is
+		buffer {buf} and assign {id} and {group} to sign.  This is
 		similar to the |:sign-place| command.
 
 		If the sign identifier {id} is zero, then a new identifier is
@@ -546,12 +547,12 @@ sign_place({id}, {group}, {name}, {expr} [, {dict}])
 		and |sign-group| for more information.
 
 		{name} refers to a defined sign.
-		{expr} refers to a buffer name or number. For the accepted
+		{buf} refers to a buffer name or number. For the accepted
 		values, see |bufname()|.
 
 		The optional {dict} argument supports the following entries:
 			lnum		line number in the file or buffer
-					{expr} where the sign is to be placed.
+					{buf} where the sign is to be placed.
 					For the accepted values, see |line()|.
 			priority	priority of the sign. See
 					|sign-priority| for more information.

runtime/doc/syntax.txt

@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 8.2.  Last change: 2021 Jul 02
+*syntax.txt*	For Vim version 8.2.  Last change: 2021 Nov 07
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -923,7 +923,7 @@ For Visual Basic use: >
 
 BAAN						    *baan.vim* *baan-syntax*
 
-The baan.vim gives syntax support for BaanC of release BaanIV upto SSA ERP LN
+The baan.vim gives syntax support for BaanC of release BaanIV up to SSA ERP LN
 for both 3 GL and 4 GL programming. Large number of standard defines/constants
 are supported.
 
@@ -1081,33 +1081,47 @@ This works immediately.
 
 CLOJURE							*ft-clojure-syntax*
 
-The default syntax groups can be augmented through the
-*g:clojure_syntax_keywords* and *b:clojure_syntax_keywords* variables. The
-value should be a |Dictionary| of syntax group names to a |List| of custom
-identifiers:
+						*g:clojure_syntax_keywords*
+
+Syntax highlighting of public vars in "clojure.core" is provided by default,
+but additional symbols can be highlighted by adding them to the
+|g:clojure_syntax_keywords| variable.  The value should be a |Dictionary| of
+syntax group names, each containing a |List| of identifiers.
 >
 	let g:clojure_syntax_keywords = {
-	    \ 'clojureMacro': ["defproject", "defcustom"],
-	    \ 'clojureFunc': ["string/join", "string/replace"]
+	    \   'clojureMacro': ["defproject", "defcustom"],
+	    \   'clojureFunc': ["string/join", "string/replace"]
 	    \ }
 <
 Refer to the Clojure syntax script for valid syntax group names.
 
-If the |buffer-variable| *b:clojure_syntax_without_core_keywords* is set, only
-language constants and special forms are matched.
+There is also *b:clojure_syntax_keywords* which is a buffer-local variant of
+this variable intended for use by plugin authors to highlight symbols
+dynamically.
 
-Setting *g:clojure_fold* enables folding Clojure code via the syntax engine.
-Any list, vector, or map that extends over more than one line can be folded
-using the standard Vim |fold-commands|.
+By setting the *b:clojure_syntax_without_core_keywords* variable, vars from
+"clojure.core" will not be highlighted by default.  This is useful for
+namespaces that have set `(:refer-clojure :only [])`
 
-Please note that this option does not work with scripts that redefine the
-bracket syntax regions, such as rainbow-parentheses plugins.
 
-This option is off by default.
+							*g:clojure_fold*
+
+Setting |g:clojure_fold| to `1` will enable the folding of Clojure code.  Any
+list, vector or map that extends over more than one line can be folded using
+the standard Vim |fold-commands|.
+
+
+						*g:clojure_discard_macro*
+
+Set this variable to `1` to enable basic highlighting of Clojure's "discard
+reader macro".
 >
-	" Default
-	let g:clojure_fold = 0
+	#_(defn foo [x]
+	    (println x))
 <
+Note that this option will not correctly highlight stacked discard macros
+(e.g. `#_#_`).
+
 
 COBOL						*cobol.vim* *ft-cobol-syntax*
 
@@ -1132,11 +1146,13 @@ The ColdFusion syntax file is based on the HTML syntax file.
 
 CPP						*cpp.vim* *ft-cpp-syntax*
 
-Most of things are same as |ft-c-syntax|.
+Most things are the same as |ft-c-syntax|.
 
 Variable		Highlight ~
 cpp_no_cpp11		don't highlight C++11 standard items
 cpp_no_cpp14		don't highlight C++14 standard items
+cpp_no_cpp17		don't highlight C++17 standard items
+cpp_no_cpp20		don't highlight C++20 standard items
 
 
 CSH						*csh.vim* *ft-csh-syntax*
@@ -1671,16 +1687,6 @@ as Fvwm2 configuration files, add the following: >
   :au! BufNewFile,BufRead /etc/X11/fvwm2/*  let b:fvwm_version = 2 |
 					 \ set filetype=fvwm
 
-If you'd like Vim to highlight all valid color names, tell it where to
-find the color database (rgb.txt) on your system.  Do this by setting
-"rgb_file" to its location.  Assuming your color database is located
-in /usr/X11/lib/X11/, you should add the line >
-
-	:let rgb_file = "/usr/X11/lib/X11/rgb.txt"
-
-to your .vimrc file.
-
-
 GSP						*gsp.vim* *ft-gsp-syntax*
 
 The default coloring style for GSP pages is defined by |html.vim|, and
@@ -4828,16 +4834,28 @@ in their own color.
 			Doesn't work recursively, thus you can't use
 			":colorscheme" in a color scheme script.
 
-			To customize a color scheme use another name, e.g.
+			You have two options for customizing a color scheme.
+			For changing the appearance of specific colors, you
+			can redefine a color name before loading the scheme.
+			The desert scheme uses the khaki color for the cursor.
+			To use a darker variation of the same color: >
+
+				let v:colornames['khaki'] = '#bdb76b'
+				colorscheme desert
+<
+			For further customization, such as changing
+			|:highlight-link| associations, use another name, e.g.
 			"~/.vim/colors/mine.vim", and use `:runtime` to load
 			the original color scheme: >
 				runtime colors/evening.vim
 				hi Statement ctermfg=Blue guifg=Blue
 
-<			Before the color scheme will be loaded the
-			|ColorSchemePre| autocommand event is triggered.
-			After the color scheme has been loaded the
-			|ColorScheme| autocommand event is triggered.
+<			Before the color scheme will be loaded all default
+			color list scripts (`colors/lists/default.vim`) will
+			be executed and then the |ColorSchemePre| autocommand
+			event is triggered.  After the color scheme has been
+			loaded the |ColorScheme| autocommand event is
+			triggered.
 			For info about writing a color scheme file: >
 				:edit $VIMRUNTIME/colors/README.txt
 
@@ -4847,6 +4865,7 @@ in their own color.
 :hi[ghlight] {group-name}
 			List one highlight group.
 
+						*highlight-clear*
 :hi[ghlight] clear	Reset all highlighting to the defaults.  Removes all
 			highlighting for groups added by the user!
 			Uses the current value of 'background' to decide which
@@ -4860,7 +4879,9 @@ in their own color.
 
 :hi[ghlight] [default] {group-name} {key}={arg} ..
 			Add a highlight group, or change the highlighting for
-			an existing group.
+			an existing group. If a given color name is not
+			receognized, each `colors/lists/default.vim` found on
+			|'runtimepath'| will be loaded.
 			See |highlight-args| for the {key}={arg} arguments.
 			See |:highlight-default| for the optional [default]
 			argument.
@@ -5141,8 +5162,35 @@ guisp={color-name}					*highlight-guisp*
 		"gg"	is the Green value
 		"bb"	is the Blue value
 	All values are hexadecimal, range from "00" to "ff".  Examples: >
-  :highlight Comment guifg=#11f0c3 guibg=#ff00ff
+            :highlight Comment guifg=#11f0c3 guibg=#ff00ff
 <
+	If you are authoring a color scheme and use the same hexademical value
+	repeatedly, you can define a name for it in |v:colornames|. For
+	example: >
+
+	    # provide a default value for this color but allow the user to
+	    # override it.
+	    :call extend(v:colornames, {'alt_turquoise': '#11f0c3'}, 'keep')
+	    :highlight Comment guifg=alt_turquoise guibg=magenta
+<
+	If you are using a color scheme that relies on named colors and you
+	would like to adjust the precise appearance of those colors, you can
+	do so by overriding the values in |v:colornames| prior to loading the
+	scheme: >
+
+	    let v:colornames['alt_turquoise'] = '#22f0d3'
+	    colorscheme alt
+<
+	If you want to develop a color list that can be relied on by others,
+	it is best to prefix your color names. By convention these color lists
+	are placed in the colors/lists directory. You can see an example in
+	'$VIMRUNTIME/colors/lists/csscolors.vim'. This list would be sourced
+	by a color scheme using: >
+
+	    :runtime colors/lists/csscolors.vim
+	    :highlight Comment guifg=css_turquoise
+<
+
 					*highlight-groups* *highlight-default*
 These are the default highlighting groups.  These groups are used by the
 'highlight' option default.  Note that the highlighting depends on the value
@@ -5201,9 +5249,8 @@ LineNrAbove	Line number for when the 'relativenumber'
 LineNrBelow	Line number for when the 'relativenumber'
 		option is set, below the cursor line.
 							*hl-CursorLineNr*
-CursorLineNr	Like LineNr when 'cursorline' is set and 'cursorlineopt' is
-		set to "number" or "both", or 'relativenumber' is set, for
-		the cursor line.
+CursorLineNr	Like LineNr when 'cursorline' is set and 'cursorlineopt'
+		contains "number" or is "both", for the cursor line.
 							*hl-MatchParen*
 MatchParen	The character under the cursor or just before it, if it
 		is a paired bracket, and its match. |pi_paren.txt|

runtime/doc/tags

@@ -302,6 +302,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'gfs'	options.txt	/*'gfs'*
 'gfw'	options.txt	/*'gfw'*
 'ghr'	options.txt	/*'ghr'*
+'gli'	options.txt	/*'gli'*
 'go'	options.txt	/*'go'*
 'go-!'	options.txt	/*'go-!'*
 'go-A'	options.txt	/*'go-A'*
@@ -339,6 +340,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'guifontset'	options.txt	/*'guifontset'*
 'guifontwide'	options.txt	/*'guifontwide'*
 'guiheadroom'	options.txt	/*'guiheadroom'*
+'guiligatures'	options.txt	/*'guiligatures'*
 'guioptions'	options.txt	/*'guioptions'*
 'guipty'	options.txt	/*'guipty'*
 'guitablabel'	options.txt	/*'guitablabel'*
@@ -1138,6 +1140,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'tgc'	options.txt	/*'tgc'*
 'tgst'	options.txt	/*'tgst'*
 'thesaurus'	options.txt	/*'thesaurus'*
+'thesaurusfunc'	options.txt	/*'thesaurusfunc'*
 'tildeop'	options.txt	/*'tildeop'*
 'timeout'	options.txt	/*'timeout'*
 'timeoutlen'	options.txt	/*'timeoutlen'*
@@ -2077,6 +2080,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :XMLent	insert.txt	/*:XMLent*
 :XMLns	insert.txt	/*:XMLns*
 :[range]	motion.txt	/*:[range]*
+:[vV\x16]	autocmd.txt	/*:[vV\\x16]*
 :\bar	cmdline.txt	/*:\\bar*
 :_!	cmdline.txt	/*:_!*
 :_#	cmdline.txt	/*:_#*
@@ -2307,6 +2311,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :command-nargs	map.txt	/*:command-nargs*
 :command-range	map.txt	/*:command-range*
 :command-register	map.txt	/*:command-register*
+:command-repl	map.txt	/*:command-repl*
 :command-verbose	map.txt	/*:command-verbose*
 :comment	cmdline.txt	/*:comment*
 :comp	quickfix.txt	/*:comp*
@@ -2320,6 +2325,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :cope	quickfix.txt	/*:cope*
 :copen	quickfix.txt	/*:copen*
 :copy	change.txt	/*:copy*
+:count_quit	windows.txt	/*:count_quit*
 :cp	quickfix.txt	/*:cp*
 :cpf	quickfix.txt	/*:cpf*
 :cpfile	quickfix.txt	/*:cpfile*
@@ -3501,6 +3507,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :y	change.txt	/*:y*
 :yank	change.txt	/*:yank*
 :z	various.txt	/*:z*
+:z!	various.txt	/*:z!*
 :z#	various.txt	/*:z#*
 :~	change.txt	/*:~*
 ;	motion.txt	/*;*
@@ -3978,10 +3985,19 @@ E12	message.txt	/*E12*
 E120	eval.txt	/*E120*
 E1200	options.txt	/*E1200*
 E1201	options.txt	/*E1201*
+E1205	eval.txt	/*E1205*
 E121	eval.txt	/*E121*
+E1214	eval.txt	/*E1214*
 E122	eval.txt	/*E122*
 E123	eval.txt	/*E123*
+E1231	map.txt	/*E1231*
+E1232	eval.txt	/*E1232*
+E1233	eval.txt	/*E1233*
+E1237	map.txt	/*E1237*
+E1239	eval.txt	/*E1239*
 E124	eval.txt	/*E124*
+E1243	options.txt	/*E1243*
+E1244	message.txt	/*E1244*
 E125	eval.txt	/*E125*
 E126	eval.txt	/*E126*
 E127	eval.txt	/*E127*
@@ -4738,7 +4754,7 @@ E835	options.txt	/*E835*
 E836	if_pyth.txt	/*E836*
 E837	if_pyth.txt	/*E837*
 E838	netbeans.txt	/*E838*
-E839	insert.txt	/*E839*
+E839	message.txt	/*E839*
 E84	windows.txt	/*E84*
 E840	insert.txt	/*E840*
 E841	map.txt	/*E841*
@@ -4791,6 +4807,7 @@ E885	sign.txt	/*E885*
 E886	starting.txt	/*E886*
 E887	if_pyth.txt	/*E887*
 E888	pattern.txt	/*E888*
+E889	message.txt	/*E889*
 E89	message.txt	/*E89*
 E890	syntax.txt	/*E890*
 E891	eval.txt	/*E891*
@@ -4833,7 +4850,7 @@ E924	quickfix.txt	/*E924*
 E925	quickfix.txt	/*E925*
 E926	quickfix.txt	/*E926*
 E927	eval.txt	/*E927*
-E928	eval.txt	/*E928*
+E928	message.txt	/*E928*
 E929	starting.txt	/*E929*
 E93	windows.txt	/*E93*
 E930	eval.txt	/*E930*
@@ -4932,6 +4949,7 @@ FileChangedRO	autocmd.txt	/*FileChangedRO*
 FileChangedShell	autocmd.txt	/*FileChangedShell*
 FileChangedShellPost	autocmd.txt	/*FileChangedShellPost*
 FileEncoding	autocmd.txt	/*FileEncoding*
+FileExplorer	autocmd.txt	/*FileExplorer*
 FileReadCmd	autocmd.txt	/*FileReadCmd*
 FileReadPost	autocmd.txt	/*FileReadPost*
 FileReadPre	autocmd.txt	/*FileReadPre*
@@ -5006,6 +5024,7 @@ Macintosh	os_mac.txt	/*Macintosh*
 Mark	motion.txt	/*Mark*
 MenuPopup	autocmd.txt	/*MenuPopup*
 MiNT	os_mint.txt	/*MiNT*
+ModeChanged	autocmd.txt	/*ModeChanged*
 Moolenaar	intro.txt	/*Moolenaar*
 MorphOS	os_amiga.txt	/*MorphOS*
 Motif	gui_x11.txt	/*Motif*
@@ -5017,6 +5036,7 @@ N:	cmdline.txt	/*N:*
 N<Del>	various.txt	/*N<Del>*
 NFA	pattern.txt	/*NFA*
 NL-used-for-Nul	pattern.txt	/*NL-used-for-Nul*
+NOT	eval.txt	/*NOT*
 Neovim	intro.txt	/*Neovim*
 NetBSD-backspace	options.txt	/*NetBSD-backspace*
 NetBeans	netbeans.txt	/*NetBeans*
@@ -5163,6 +5183,10 @@ TabNew	autocmd.txt	/*TabNew*
 Tcl	if_tcl.txt	/*Tcl*
 TermChanged	autocmd.txt	/*TermChanged*
 TermResponse	autocmd.txt	/*TermResponse*
+TermdebugStartPost	terminal.txt	/*TermdebugStartPost*
+TermdebugStartPre	terminal.txt	/*TermdebugStartPre*
+TermdebugStopPost	terminal.txt	/*TermdebugStopPost*
+TermdebugStopPre	terminal.txt	/*TermdebugStopPre*
 Terminal-Job	terminal.txt	/*Terminal-Job*
 Terminal-Normal	terminal.txt	/*Terminal-Normal*
 Terminal-mode	terminal.txt	/*Terminal-mode*
@@ -5540,10 +5564,12 @@ beval_winnr-variable	eval.txt	/*beval_winnr-variable*
 binary-number	eval.txt	/*binary-number*
 bitwise-function	usr_41.txt	/*bitwise-function*
 blob	eval.txt	/*blob*
+blob-functions	usr_41.txt	/*blob-functions*
 blob-identity	eval.txt	/*blob-identity*
 blob-index	eval.txt	/*blob-index*
 blob-literal	eval.txt	/*blob-literal*
 blob-modification	eval.txt	/*blob-modification*
+blob2list()	eval.txt	/*blob2list()*
 blockwise-examples	visual.txt	/*blockwise-examples*
 blockwise-operators	visual.txt	/*blockwise-operators*
 blockwise-register	change.txt	/*blockwise-register*
@@ -5909,7 +5935,10 @@ compl-keyword	insert.txt	/*compl-keyword*
 compl-omni	insert.txt	/*compl-omni*
 compl-omni-filetypes	insert.txt	/*compl-omni-filetypes*
 compl-spelling	insert.txt	/*compl-spelling*
+compl-stop	insert.txt	/*compl-stop*
 compl-tag	insert.txt	/*compl-tag*
+compl-thesaurus	insert.txt	/*compl-thesaurus*
+compl-thesaurusfunc	insert.txt	/*compl-thesaurusfunc*
 compl-vim	insert.txt	/*compl-vim*
 compl-whole-line	insert.txt	/*compl-whole-line*
 complete()	eval.txt	/*complete()*
@@ -6161,6 +6190,10 @@ digraph-encoding	digraph.txt	/*digraph-encoding*
 digraph-table	digraph.txt	/*digraph-table*
 digraph-table-mbyte	digraph.txt	/*digraph-table-mbyte*
 digraph.txt	digraph.txt	/*digraph.txt*
+digraph_get()	eval.txt	/*digraph_get()*
+digraph_getlist()	eval.txt	/*digraph_getlist()*
+digraph_set()	eval.txt	/*digraph_set()*
+digraph_setlist()	eval.txt	/*digraph_setlist()*
 digraphs	digraph.txt	/*digraphs*
 digraphs-changed	version6.txt	/*digraphs-changed*
 digraphs-default	digraph.txt	/*digraphs-default*
@@ -6306,6 +6339,7 @@ execute-menus	gui.txt	/*execute-menus*
 exepath()	eval.txt	/*exepath()*
 exim	starting.txt	/*exim*
 exists()	eval.txt	/*exists()*
+exists_compiled()	eval.txt	/*exists_compiled()*
 exiting	starting.txt	/*exiting*
 exiting-variable	eval.txt	/*exiting-variable*
 exp()	eval.txt	/*exp()*
@@ -6526,7 +6560,6 @@ format-bullet-list	tips.txt	/*format-bullet-list*
 format-comments	change.txt	/*format-comments*
 format-formatexpr	change.txt	/*format-formatexpr*
 formatting	change.txt	/*formatting*
-formfeed	intro.txt	/*formfeed*
 fortran.vim	syntax.txt	/*fortran.vim*
 friendship	intro.txt	/*friendship*
 frombook	usr_01.txt	/*frombook*
@@ -6585,6 +6618,7 @@ ft-fortran-plugin	filetype.txt	/*ft-fortran-plugin*
 ft-fortran-syntax	syntax.txt	/*ft-fortran-syntax*
 ft-fvwm-syntax	syntax.txt	/*ft-fvwm-syntax*
 ft-gitcommit-plugin	filetype.txt	/*ft-gitcommit-plugin*
+ft-gprof-plugin	filetype.txt	/*ft-gprof-plugin*
 ft-groff-syntax	syntax.txt	/*ft-groff-syntax*
 ft-gsp-syntax	syntax.txt	/*ft-gsp-syntax*
 ft-haskell-syntax	syntax.txt	/*ft-haskell-syntax*
@@ -6759,6 +6793,7 @@ g:ada_with_gnat_project_files	ft_ada.txt	/*g:ada_with_gnat_project_files*
 g:ada_withuse_ordinary	ft_ada.txt	/*g:ada_withuse_ordinary*
 g:clojure_align_multiline_strings	indent.txt	/*g:clojure_align_multiline_strings*
 g:clojure_align_subforms	indent.txt	/*g:clojure_align_subforms*
+g:clojure_discard_macro	syntax.txt	/*g:clojure_discard_macro*
 g:clojure_fold	syntax.txt	/*g:clojure_fold*
 g:clojure_fuzzy_indent	indent.txt	/*g:clojure_fuzzy_indent*
 g:clojure_fuzzy_indent_blacklist	indent.txt	/*g:clojure_fuzzy_indent_blacklist*
@@ -6818,10 +6853,12 @@ g:netrw_altv	pi_netrw.txt	/*g:netrw_altv*
 g:netrw_banner	pi_netrw.txt	/*g:netrw_banner*
 g:netrw_bannerbackslash	pi_netrw.txt	/*g:netrw_bannerbackslash*
 g:netrw_browse_split	pi_netrw.txt	/*g:netrw_browse_split*
+g:netrw_browsex_support_remote	pi_netrw.txt	/*g:netrw_browsex_support_remote*
 g:netrw_browsex_viewer	pi_netrw.txt	/*g:netrw_browsex_viewer*
 g:netrw_bufsettings	pi_netrw.txt	/*g:netrw_bufsettings*
 g:netrw_chgperm	pi_netrw.txt	/*g:netrw_chgperm*
 g:netrw_chgwin	pi_netrw.txt	/*g:netrw_chgwin*
+g:netrw_clipboard	pi_netrw.txt	/*g:netrw_clipboard*
 g:netrw_compress	pi_netrw.txt	/*g:netrw_compress*
 g:netrw_ctags	pi_netrw.txt	/*g:netrw_ctags*
 g:netrw_cursor	pi_netrw.txt	/*g:netrw_cursor*
@@ -6936,6 +6973,7 @@ g:tar_nomax	pi_tar.txt	/*g:tar_nomax*
 g:tar_readoptions	pi_tar.txt	/*g:tar_readoptions*
 g:tar_secure	pi_tar.txt	/*g:tar_secure*
 g:tar_writeoptions	pi_tar.txt	/*g:tar_writeoptions*
+g:termdebugger	terminal.txt	/*g:termdebugger*
 g:terminal_ansi_colors	terminal.txt	/*g:terminal_ansi_colors*
 g:tex_comment_nospell	syntax.txt	/*g:tex_comment_nospell*
 g:tex_conceal	syntax.txt	/*g:tex_conceal*
@@ -7178,6 +7216,7 @@ gui-x11-printing	gui_x11.txt	/*gui-x11-printing*
 gui-x11-start	gui_x11.txt	/*gui-x11-start*
 gui-x11-various	gui_x11.txt	/*gui-x11-various*
 gui.txt	gui.txt	/*gui.txt*
+gui_running	eval.txt	/*gui_running*
 gui_w32.txt	gui_w32.txt	/*gui_w32.txt*
 gui_x11.txt	gui_x11.txt	/*gui_x11.txt*
 guifontwide_gtk	gui.txt	/*guifontwide_gtk*
@@ -7246,6 +7285,7 @@ hidden-options	options.txt	/*hidden-options*
 hidden-quit	windows.txt	/*hidden-quit*
 highlight-args	syntax.txt	/*highlight-args*
 highlight-changed	version4.txt	/*highlight-changed*
+highlight-clear	syntax.txt	/*highlight-clear*
 highlight-cterm	syntax.txt	/*highlight-cterm*
 highlight-ctermbg	syntax.txt	/*highlight-ctermbg*
 highlight-ctermfg	syntax.txt	/*highlight-ctermfg*
@@ -7339,7 +7379,9 @@ hl-debugBreakpoint	terminal.txt	/*hl-debugBreakpoint*
 hl-debugPC	terminal.txt	/*hl-debugPC*
 hlID()	eval.txt	/*hlID()*
 hlexists()	eval.txt	/*hlexists()*
+hlget()	eval.txt	/*hlget()*
 hlsearch-variable	eval.txt	/*hlsearch-variable*
+hlset()	eval.txt	/*hlset()*
 holy-grail	index.txt	/*holy-grail*
 home	intro.txt	/*home*
 home-replace	editing.txt	/*home-replace*
@@ -7460,6 +7502,7 @@ i_CTRL-X_CTRL-T	insert.txt	/*i_CTRL-X_CTRL-T*
 i_CTRL-X_CTRL-U	insert.txt	/*i_CTRL-X_CTRL-U*
 i_CTRL-X_CTRL-V	insert.txt	/*i_CTRL-X_CTRL-V*
 i_CTRL-X_CTRL-Y	insert.txt	/*i_CTRL-X_CTRL-Y*
+i_CTRL-X_CTRL-Z	insert.txt	/*i_CTRL-X_CTRL-Z*
 i_CTRL-X_CTRL-]	insert.txt	/*i_CTRL-X_CTRL-]*
 i_CTRL-X_index	index.txt	/*i_CTRL-X_index*
 i_CTRL-X_s	insert.txt	/*i_CTRL-X_s*
@@ -7678,6 +7721,7 @@ lcs-conceal	options.txt	/*lcs-conceal*
 lcs-eol	options.txt	/*lcs-eol*
 lcs-extends	options.txt	/*lcs-extends*
 lcs-lead	options.txt	/*lcs-lead*
+lcs-multispace	options.txt	/*lcs-multispace*
 lcs-nbsp	options.txt	/*lcs-nbsp*
 lcs-precedes	options.txt	/*lcs-precedes*
 lcs-space	options.txt	/*lcs-space*
@@ -7712,6 +7756,7 @@ list-identity	eval.txt	/*list-identity*
 list-index	eval.txt	/*list-index*
 list-modification	eval.txt	/*list-modification*
 list-repeat	windows.txt	/*list-repeat*
+list2blob()	eval.txt	/*list2blob()*
 list2str()	eval.txt	/*list2str()*
 listener_add()	eval.txt	/*listener_add()*
 listener_flush()	eval.txt	/*listener_flush()*
@@ -7764,6 +7809,7 @@ lua-funcref	if_lua.txt	/*lua-funcref*
 lua-list	if_lua.txt	/*lua-list*
 lua-luaeval	if_lua.txt	/*lua-luaeval*
 lua-vim	if_lua.txt	/*lua-vim*
+lua-vim-variables	if_lua.txt	/*lua-vim-variables*
 lua-window	if_lua.txt	/*lua-window*
 lua.vim	syntax.txt	/*lua.vim*
 luaeval()	eval.txt	/*luaeval()*
@@ -8607,6 +8653,7 @@ prompt_setprompt()	eval.txt	/*prompt_setprompt()*
 promptbuffer-functions	usr_41.txt	/*promptbuffer-functions*
 pronounce	intro.txt	/*pronounce*
 prop_add()	textprop.txt	/*prop_add()*
+prop_add_list()	textprop.txt	/*prop_add_list()*
 prop_clear()	textprop.txt	/*prop_clear()*
 prop_find()	textprop.txt	/*prop_find()*
 prop_list()	textprop.txt	/*prop_list()*
@@ -8894,6 +8941,7 @@ save-file	editing.txt	/*save-file*
 save-settings	starting.txt	/*save-settings*
 scheme.vim	syntax.txt	/*scheme.vim*
 scp	pi_netrw.txt	/*scp*
+scratch-buffer	windows.txt	/*scratch-buffer*
 screenattr()	eval.txt	/*screenattr()*
 screenchar()	eval.txt	/*screenchar()*
 screenchars()	eval.txt	/*screenchars()*
@@ -9021,6 +9069,9 @@ simulated-command	vi_diff.txt	/*simulated-command*
 sin()	eval.txt	/*sin()*
 single-repeat	repeat.txt	/*single-repeat*
 sinh()	eval.txt	/*sinh()*
+sizeofint-variable	eval.txt	/*sizeofint-variable*
+sizeoflong-variable	eval.txt	/*sizeoflong-variable*
+sizeofpointer-variable	eval.txt	/*sizeofpointer-variable*
 skeleton	autocmd.txt	/*skeleton*
 skip_defaults_vim	starting.txt	/*skip_defaults_vim*
 slice	eval.txt	/*slice*
@@ -9640,6 +9691,7 @@ termcap-title	term.txt	/*termcap-title*
 termdebug-commands	terminal.txt	/*termdebug-commands*
 termdebug-communication	terminal.txt	/*termdebug-communication*
 termdebug-customizing	terminal.txt	/*termdebug-customizing*
+termdebug-events	terminal.txt	/*termdebug-events*
 termdebug-example	terminal.txt	/*termdebug-example*
 termdebug-prompt	terminal.txt	/*termdebug-prompt*
 termdebug-starting	terminal.txt	/*termdebug-starting*
@@ -9769,6 +9821,7 @@ timestamps	editing.txt	/*timestamps*
 tips	tips.txt	/*tips*
 tips.txt	tips.txt	/*tips.txt*
 tmux	syntax.txt	/*tmux*
+tmux-integration	term.txt	/*tmux-integration*
 todo	todo.txt	/*todo*
 todo.txt	todo.txt	/*todo.txt*
 toggle	options.txt	/*toggle*
@@ -9790,6 +9843,7 @@ try-echoerr	eval.txt	/*try-echoerr*
 try-finally	eval.txt	/*try-finally*
 try-nested	eval.txt	/*try-nested*
 try-nesting	eval.txt	/*try-nesting*
+tsrfu'	options.txt	/*tsrfu'*
 tutor	usr_01.txt	/*tutor*
 twice	if_cscop.txt	/*twice*
 two-engines	pattern.txt	/*two-engines*
@@ -9894,6 +9948,7 @@ v:charconvert_to	eval.txt	/*v:charconvert_to*
 v:cmdarg	eval.txt	/*v:cmdarg*
 v:cmdbang	eval.txt	/*v:cmdbang*
 v:collate	eval.txt	/*v:collate*
+v:colornames	eval.txt	/*v:colornames*
 v:completed_item	eval.txt	/*v:completed_item*
 v:count	eval.txt	/*v:count*
 v:count1	eval.txt	/*v:count1*
@@ -9949,6 +10004,9 @@ v:scrollstart	eval.txt	/*v:scrollstart*
 v:searchforward	eval.txt	/*v:searchforward*
 v:servername	eval.txt	/*v:servername*
 v:shell_error	eval.txt	/*v:shell_error*
+v:sizeofint	eval.txt	/*v:sizeofint*
+v:sizeoflong	eval.txt	/*v:sizeoflong*
+v:sizeofpointer	eval.txt	/*v:sizeofpointer*
 v:statusmsg	eval.txt	/*v:statusmsg*
 v:swapchoice	eval.txt	/*v:swapchoice*
 v:swapcommand	eval.txt	/*v:swapcommand*
@@ -10160,6 +10218,7 @@ vim-8.2	version8.txt	/*vim-8.2*
 vim-additions	vi_diff.txt	/*vim-additions*
 vim-announce	intro.txt	/*vim-announce*
 vim-arguments	starting.txt	/*vim-arguments*
+vim-changelog	version8.txt	/*vim-changelog*
 vim-default-editor	gui_w32.txt	/*vim-default-editor*
 vim-dev	intro.txt	/*vim-dev*
 vim-mac	intro.txt	/*vim-mac*
@@ -10169,7 +10228,12 @@ vim-raku	ft_raku.txt	/*vim-raku*
 vim-script-intro	usr_41.txt	/*vim-script-intro*
 vim-use	intro.txt	/*vim-use*
 vim-variable	eval.txt	/*vim-variable*
+vim.b	if_lua.txt	/*vim.b*
+vim.g	if_lua.txt	/*vim.g*
+vim.t	if_lua.txt	/*vim.t*
+vim.v	if_lua.txt	/*vim.v*
 vim.vim	syntax.txt	/*vim.vim*
+vim.w	if_lua.txt	/*vim.w*
 vim7	version7.txt	/*vim7*
 vim8	version8.txt	/*vim8*
 vim9	vim9.txt	/*vim9*
@@ -10182,6 +10246,7 @@ vim9-declarations	usr_46.txt	/*vim9-declarations*
 vim9-differences	vim9.txt	/*vim9-differences*
 vim9-export	vim9.txt	/*vim9-export*
 vim9-final	vim9.txt	/*vim9-final*
+vim9-function-defined-later	vim9.txt	/*vim9-function-defined-later*
 vim9-gotchas	vim9.txt	/*vim9-gotchas*
 vim9-ignored-argument	vim9.txt	/*vim9-ignored-argument*
 vim9-import	vim9.txt	/*vim9-import*
@@ -10189,6 +10254,7 @@ vim9-lambda	vim9.txt	/*vim9-lambda*
 vim9-lambda-arguments	vim9.txt	/*vim9-lambda-arguments*
 vim9-mix	vim9.txt	/*vim9-mix*
 vim9-namespace	vim9.txt	/*vim9-namespace*
+vim9-no-dict-function	vim9.txt	/*vim9-no-dict-function*
 vim9-rationale	vim9.txt	/*vim9-rationale*
 vim9-reload	vim9.txt	/*vim9-reload*
 vim9-scopes	vim9.txt	/*vim9-scopes*
@@ -10305,6 +10371,7 @@ win32-faq	os_win32.txt	/*win32-faq*
 win32-gettext	mlang.txt	/*win32-gettext*
 win32-gui	gui_w32.txt	/*win32-gui*
 win32-hidden-menus	gui.txt	/*win32-hidden-menus*
+win32-installer	os_win32.txt	/*win32-installer*
 win32-mouse	os_win32.txt	/*win32-mouse*
 win32-open-with-menu	gui_w32.txt	/*win32-open-with-menu*
 win32-popup-menu	gui_w32.txt	/*win32-popup-menu*

runtime/doc/term.txt

@@ -1,4 +1,4 @@
-*term.txt*      For Vim version 8.2.  Last change: 2021 Jan 14
+*term.txt*      For Vim version 8.2.  Last change: 2021 Aug 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -126,6 +126,37 @@ automatically, you can try using something like this: >
 	  exec "set t_PS=\e[200~"
 	  exec "set t_PE=\e[201~"
 	endif
+<
+							*tmux-integration*
+If you experience issues when running Vim inside tmux, here are a few hints.
+You can comment-out parts if something doesn't work (it may depend on the
+terminal that tmux is running in): >
+
+    if !has('gui_running') && &term =~ '^\%(screen\|tmux\)'
+        " Better mouse support, see  :help 'ttymouse'
+        set ttymouse=sgr
+
+        " Enable true colors, see  :help xterm-true-color
+        let &termguicolors = v:true
+        let &t_8f = "\<Esc>[38;2;%lu;%lu;%lum"
+        let &t_8b = "\<Esc>[48;2;%lu;%lu;%lum"
+
+        " Enable bracketed paste mode, see  :help xterm-bracketed-paste
+        let &t_BE = "\<Esc>[?2004h"
+        let &t_BD = "\<Esc>[?2004l"
+        let &t_PS = "\<Esc>[200~"
+        let &t_PE = "\<Esc>[201~"
+
+        " Enable focus event tracking, see  :help xterm-focus-event
+        let &t_fe = "\<Esc>[?1004h"
+        let &t_fd = "\<Esc>[?1004l"
+
+        " Enable modified arrow keys, see  :help xterm-modifier-keys
+        execute "silent! set <xUp>=\<Esc>[@;*A"
+        execute "silent! set <xDown>=\<Esc>[@;*B"
+        execute "silent! set <xRight>=\<Esc>[@;*C"
+        execute "silent! set <xLeft>=\<Esc>[@;*D"
+    endif
 <
 							*cs7-problem*
 Note: If the terminal settings are changed after running Vim, you might have
@@ -559,6 +590,11 @@ Focus event tracking is disabled by a 't_fd' sequence when exiting "raw" mode.
 If you would like to disable this feature, add the following to your .vimrc:
 	`set t_fd=`
 	`set t_fe=`
+If your terminal does support this but Vim does not recognize the terminal,
+you may have to set the options yourself: >
+	let &t_fe = "\<Esc>[?1004h"
+	let &t_fd = "\<Esc>[?1004l"
+If this causes garbage to show when Vim starts up then it doesn't work.
 
 							*termcap-colors*
 Note about colors: The 't_Co' option tells Vim the number of colors available.

runtime/doc/terminal.txt

@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 8.2.  Last change: 2021 Feb 13
+*terminal.txt*	For Vim version 8.2.  Last change: 2021 Aug 15
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -168,9 +168,6 @@ terminal window will start with a white or black background.
 To use a different color the Terminal highlight group can be used, for
 example: >
     hi Terminal ctermbg=lightgrey ctermfg=blue guibg=lightgrey guifg=blue
-The highlight needs to be defined before the terminal is created.  Doing it
-later, or setting 'wincolor', will only have effect when the program running
-in the terminal displays text or clears the terminal.
 Instead of Terminal another group can be specified with the "term_highlight"
 option for `term_start()`.
 
@@ -752,18 +749,6 @@ term_sendkeys({buf}, {keys})				*term_sendkeys()*
 			GetBufnr()->term_sendkeys(keys)
 
 
-term_setapi({buf}, {expr})				*term_setapi()*
-		Set the function name prefix to be used for the |terminal-api|
-		function in terminal {buf}.  For example: >
-		    :call term_setapi(buf, "Myapi_")
-		    :call term_setapi(buf, "")
-<
-		The default is "Tapi_".  When {expr} is an empty string then
-		no |terminal-api| function can be used for {buf}.
-
-		When used as a method the base is used for {buf}: >
-			GetBufnr()->term_setapi({expr})
-
 term_setansicolors({buf}, {colors})			*term_setansicolors()*
 		Set the ANSI color palette used by terminal {buf}.
 		{colors} must be a List of 16 valid color names or hexadecimal
@@ -799,6 +784,20 @@ term_setansicolors({buf}, {colors})			*term_setansicolors()*
 <		{only available with GUI enabled and/or the |+termguicolors|
 		feature}
 
+
+term_setapi({buf}, {expr})				*term_setapi()*
+		Set the function name prefix to be used for the |terminal-api|
+		function in terminal {buf}.  For example: >
+		    :call term_setapi(buf, "Myapi_")
+		    :call term_setapi(buf, "")
+<
+		The default is "Tapi_".  When {expr} is an empty string then
+		no |terminal-api| function can be used for {buf}.
+
+		When used as a method the base is used for {buf}: >
+			GetBufnr()->term_setapi({expr})
+
+
 term_setkill({buf}, {how})				*term_setkill()*
 		When exiting Vim or trying to close the terminal window in
 		another way, {how} defines whether the job in the terminal can
@@ -872,7 +871,8 @@ term_start({cmd} [, {options}])			*term_start()*
 		   "term_name"	     name to use for the buffer name, instead
 				     of the command name.
 		   "term_rows"	     vertical size to use for the terminal,
-				     instead of using 'termwinsize'
+				     instead of using 'termwinsize'; valid
+				     range is from zero to 1000
 		   "term_cols"	     horizontal size to use for the terminal,
 				     instead of using 'termwinsize'
 		   "vertical"	     split the window vertically; note that
@@ -1352,6 +1352,33 @@ Other commands ~
  *:Asm*	     jump to the window with the disassembly, create it if there
 	     isn't one
 
+Events ~
+							*termdebug-events*
+Four autocommands can be used: >
+	au User TermdebugStartPre  echomsg 'debugging starting'
+	au User TermdebugStartPost echomsg 'debugging started'
+	au User TermdebugStopPre   echomsg 'debugging stopping'
+	au User TermdebugStopPost  echomsg 'debugging stopped'
+<
+						*TermdebugStartPre*
+TermdebugStartPre		Before starting debugging.
+				Not triggered if the debugger is already
+				running or |g:termdebugger| cannot be
+				executed.
+						*TermdebugStartPost*
+TermdebugStartPost		After debugging has initialized.
+				If a "!" bang is passed to `:Termdebug` or
+				`:TermdebugCommand` the event is triggered
+				before running the provided command in gdb.
+						*TermdebugStopPre*
+TermdebugStopPre		Before debugging ends, when gdb is terminated,
+				most likely after issuing a "quit" command in
+				the gdb window.
+						*TermdebugStopPost*
+TermdebugStopPost		After debugging has ended, gdb-related windows
+				are closed, debug buffers wiped out and
+				the state before the debugging was restored.
+
 
 Prompt mode ~
 						*termdebug-prompt*
@@ -1396,11 +1423,11 @@ communication channel.
 
 Customizing ~
 
-GDB command						 *termdebug-customizing*
-
-To change the name of the gdb command, set the "termdebugger" variable before
+GDB command						*termdebug-customizing*
+							*g:termdebugger*
+To change the name of the gdb command, set the "g:termdebugger" variable before
 invoking `:Termdebug`: >
-	let termdebugger = "mygdb"
+	let g:termdebugger = "mygdb"
 <							*gdb-version*
 Only debuggers fully compatible with gdb will work.  Vim uses the GDB/MI
 interface.  The "new-ui" command  requires gdb version 7.12 or later.  if you

runtime/doc/testing.txt

@@ -1,4 +1,4 @@
-*testing.txt*	For Vim version 8.2.  Last change: 2021 Jul 07
+*testing.txt*	For Vim version 8.2.  Last change: 2021 Aug 15
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -46,6 +46,7 @@ test_alloc_fail({id}, {countdown}, {repeat})		*test_alloc_fail()*
 		Can also be used as a |method|: >
 			GetAllocId()->test_alloc_fail()
 
+
 test_autochdir()					*test_autochdir()*
 		Set a flag to enable the effect of 'autochdir' before Vim
 		startup has finished.
@@ -59,6 +60,7 @@ test_feedinput({string})				*test_feedinput()*
 		Can also be used as a |method|: >
 			GetText()->test_feedinput()
 
+
 test_garbagecollect_now()			 *test_garbagecollect_now()*
 		Like garbagecollect(), but executed right away.  This must
 		only be called directly to avoid any structure to exist
@@ -83,14 +85,14 @@ test_getvalue({name})					*test_getvalue()*
 test_gui_drop_files({list}, {row}, {col}, {mods})
 		Drop one or more files in {list} in the window at {row}, {col}.
 		This function only works when the GUI is running and the
-		|drag-n-drop| feature is present.
-		
+		|drop_file| feature is present.
+
 		The supported values for {mods} are:
 			0x4	Shift
 			0x8	Alt
 			0x10	Ctrl
-		The files are added to the argument list and the first file in
-		{list} is edited in the window.  See |drag-n-drop| for more
+		The files are added to the |argument-list| and the first file
+		in {list} is edited in the window.  See |drag-n-drop| for more
 		information.
 
 						*test_gui_mouse_event()*
@@ -132,6 +134,7 @@ test_ignore_error({expr})			 *test_ignore_error()*
 		Can also be used as a |method|: >
 			GetErrorText()->test_ignore_error()
 
+
 test_null_blob()					*test_null_blob()*
 		Return a |Blob| that is null. Only useful for testing.
 
@@ -166,13 +169,6 @@ test_null_string()					*test_null_string()*
 		Return a |String| that is null. Only useful for testing.
 
 
-test_unknown()						*test_unknown()*
-		Return a value with unknown type. Only useful for testing.
-
-test_void()						*test_void()*
-		Return a value with void type. Only useful for testing.
-
-
 test_option_not_set({name})				*test_option_not_set()*
 		Reset the flag that indicates option {name} was set.  Thus it
 		looks like it still has the default value. Use like this: >
@@ -224,6 +220,7 @@ test_override({name}, {val})				*test_override()*
 <		Can also be used as a |method|: >
 			GetOverrideVal()-> test_override('starting')
 
+
 test_refcount({expr})					*test_refcount()*
 		Return the reference count of {expr}.  When {expr} is of a
 		type that does not have a reference count, returns -1.  Only
@@ -253,6 +250,7 @@ test_scrollbar({which}, {value}, {dragging})		*test_scrollbar()*
 		Can also be used as a |method|: >
 			GetValue()->test_scrollbar('right', 0)
 
+
 test_setmouse({row}, {col})				*test_setmouse()*
 		Set the mouse position to be used for the next mouse action.
 		{row} and {col} are one based.
@@ -260,6 +258,7 @@ test_setmouse({row}, {col})				*test_setmouse()*
 			call test_setmouse(4, 20)
 			call feedkeys("\<LeftMouse>", "xt")
 
+
 test_settime({expr})					*test_settime()*
 		Set the time Vim uses internally.  Currently only used for
 		timestamps in the history, as they are used in viminfo, and
@@ -272,10 +271,19 @@ test_settime({expr})					*test_settime()*
 		Can also be used as a |method|: >
 			GetTime()->test_settime()
 
+
 test_srand_seed([seed])					*test_srand_seed()*
 		When [seed] is given this sets the seed value used by
 		`srand()`.  When omitted the test seed is removed.
 
+
+test_unknown()						*test_unknown()*
+		Return a value with unknown type. Only useful for testing.
+
+
+test_void()						*test_void()*
+		Return a value with void type. Only useful for testing.
+
 ==============================================================================
 3. Assert functions				*assert-functions-details*
 
@@ -446,7 +454,7 @@ assert_notmatch({pattern}, {actual} [, {msg}])
 
 
 assert_report({msg})					*assert_report()*
-		Report a test failure directly, using {msg}.
+		Report a test failure directly, using String {msg}.
 		Always returns one.
 
 		Can also be used as a |method|: >

runtime/doc/textprop.txt

@@ -1,4 +1,4 @@
-*textprop.txt*  For Vim version 8.2.  Last change: 2021 May 26
+*textprop.txt*  For Vim version 8.2.  Last change: 2021 Aug 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -108,6 +108,9 @@ prop_type_list([{props}])		get list of property types
 Manipulating text properties:
 
 prop_add({lnum}, {col}, {props})  	add a text property
+prop_add_list({props}, [[{lnum}, {col}, {end-lnum}, {end-col}], ...])
+					add a text property at multiple
+					positions.
 prop_clear({lnum} [, {lnum-end} [, {bufnr}]])
 					remove all text properties
 prop_find({props} [, {direction}])	search for a text property
@@ -157,6 +160,35 @@ prop_add({lnum}, {col}, {props})
 
 		Can also be used as a |method|: >
 			GetLnum()->prop_add(col, props)
+<
+						*prop_add_list()*
+prop_add_list({props}, [[{lnum}, {col}, {end-lnum}, {end-col}], ...])
+		Similar to prop_add(), but attaches a text property at
+		multiple positions in a buffer.
+
+		{props} is a dictionary with these fields:
+		   bufnr	buffer to add the property to; when omitted
+				the current buffer is used
+		   id		user defined ID for the property; must be a
+				number; when omitted zero is used
+		   type		name of the text property type
+		All fields except "type" are optional.
+
+		The second argument is a List of Lists where each list
+		specifies the starting and ending position of the text.  The
+		first two items {lnum} and {col} specify the starting position
+		of the text where the property will be attached and the last
+		two items {end-lnum} and {end-col} specify the position just
+		after the text.
+
+		Example:
+			call prop_add_list(#{type: 'MyProp', id: 2},
+					\ [[1, 4, 1, 7],
+					\  [1, 15, 1, 20],
+					\  [2, 30, 3, 30]]
+
+		Can also be used as a |method|: >
+			GetProp()->prop_add_list([[1, 1, 1, 2], [1, 4, 1, 8]])
 
 
 prop_clear({lnum} [, {lnum-end} [, {props}]])		*prop_clear()*
@@ -211,6 +243,8 @@ prop_list({lnum} [, {props}])				*prop_list()*
 		   id		property ID
 		   type		name of the property type, omitted if
 				the type was deleted
+		   type_bufnr	buffer number for which this type was defined;
+				0 if the type is global
 		   start	when TRUE property starts in this line
 		   end		when TRUE property ends in this line
 

runtime/doc/tips.txt

@@ -1,4 +1,4 @@
-*tips.txt*      For Vim version 8.2.  Last change: 2020 Dec 29
+*tips.txt*      For Vim version 8.2.  Last change: 2021 Nov 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -549,6 +549,7 @@ the current window, try this custom `:HelpCurwin` command:
 	  endif
 	  if !getcompletion(a:subject, 'help')->empty()
 	    execute mods .. ' edit ' .. &helpfile
+	    set buftype=help
 	  endif
 	  return 'help ' .. a:subject
 	endfunction

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.2.  Last change: 2021 Jul 05
+*todo.txt*      For Vim version 8.2.  Last change: 2021 Nov 04
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -38,11 +38,17 @@ browser use: https://github.com/vim/vim/issues/1234
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
+mark ends up on last byte of char. (#9047)
+
+Delete runtime/rgb.txt after a while
+
 Vim9 - Make everything work:
-- possible leak in test_vim9_builtin ?
-- Make "for _ in range()" work, do not store the value in a var.
+- "filter #pat# ls" should work, #pat# is not a comment
+    vim9script
+    edit foobar
+    filter #foobar# ls
+- Check TODO items in vim9compile.c and vim9execute.c
 - use CheckLegacyAndVim9Success(lines) in many more places
-- compile get_lambda_tv() in popup_add_timeout()
 - For builtin functions using tv_get_string*() use check_for_string() to be
   more strict about the argument type (not a bool).
     done: balloon_()
@@ -57,6 +63,7 @@ Vim9 - Make everything work:
   defined.
 - Unexpected error message when using "var x: any | x.key = 9", because "x" is
   given the type number.  Can we use VAR_ANY?
+- Check performance with callgrind and kcachegrind.
 
 Once Vim9 is stable:
 - Add the "vim9script" feature, can use has('vim9script')
@@ -72,8 +79,11 @@ Further Vim9 improvements, possibly after launch:
   'foldexpr', 'foldtext', 'printexpr', 'diffexpr', 'patchexpr', 'charconvert',
   'balloonexpr', 'includeexpr', 'indentexpr', 'formatexpr'.
   Give an error if compilation fails. (#7625)
+  Alternatively: Detect a compiled function call and skip the expression
+  evaluation.
   Use the location where the option was set for deciding whether it's to be
   evaluated in Vim9 script context.
+- Handle command that is only a range more efficient than calling ISN_EXEC
 - implement :type, "import type"
 - implement enum,  "import enum".
 - implement class and interface: See |vim9-classes|
@@ -214,10 +224,16 @@ Terminal emulator window:
 
 Include patch #6290: recognize shell directory change.
 
-MS-Windows GUI: default 'encoding' to "utf-8" ?  (#8221)
-    Add #ifdef MSWIN before enc_locale() in set_init_1().
-    Or just always for MS-Windows?  Conversion to 'termencoding' should always
-    work?
+When using 'cryptmethod' xchaha20 the undo file is not encrypted.
+Need to handle extra bytes.
+
+Test_communicate_ipv6(): is flaky on many systems
+Fails in line 64 of Ch_communicate, no exception is thrown.
+
+Patch for Template string: #4634
+Have another look at the implementation.
+
+Rename getdigraphlist -> digraph_getlist() etc.
 
 Valgrind reports memory leaks in test_options.
 Valgrind reports overlapping memcpy in
@@ -229,7 +245,6 @@ Valgrind reports overlapping memcpy in
     test_normal
     test_popupwin.35 et al.
     test_search_stat
-Using uninitialized value in test_crypt (can't explain why).
 Memory leak in test_debugger
 Memory leak in test_paste, using XtOpenDisplay several times
 OLD:
@@ -238,10 +253,14 @@ Memory leak in test_alot with pyeval() (allocating partial)
 Memory leak in test_alot with expand()
 Memory leaks in test_channel? (or is it because of fork())
 
+Idea: when typing ":e /some/dir/" and "dir" does not exist, highlight in red.
+
 ":set &shellpipe" and ":set &shellredir" should use the logic from
 initialization to figure out the default value from 'shell'.  Add a test for
 this.
 
+MS-Windows: did path modifier :p:8 stop working?  #8600
+
 test_arglist func Test_all_not_allowed_from_cmdwin() hangs on MS-Windows.
 
 Mapping with partial match not executed properly in GTK. (Ingo Karkat, #7082)
@@ -250,25 +269,26 @@ Problem that a previous silent ":throw" causes a following try/catch not to
 work. (ZyX, 2013 Sep 28) With examples: (Malcolm Rowe, 2015 Dec 24)
 Also see #8487 for an example.
 
-Patch for Template string: #4634
-Have another look at the implementation.
-
 Patch to implement the vimtutor with a plugin: #6414
 Was originally written by Felipe Morales.
 
 Request to use "." for the cursor column in search pattern \%<.c and \%<.v.
 (#8179)
 
+Remove SPACE_IN_FILENAME ? It is only used for completion.
+
 Adding "10" to 'spellsuggest' causes spell suggestions to become very slow.
 (#4087)  Did patch 8.2.2379 help?
 Also, z= in German on a long word can take a very long time, but CTRL-C to
 interrupt does not work. Where to add ui_breakcheck()?
-
-Remove SPACE_IN_FILENAME ? It is only used for completion.
+New English spell files also have very slow suggestions.
 
 Searching for \%'> does not find anything when using line Visual selection.
 Probably because it's using MAXCOL.  #8238
 
+Make "g>" and "g<" in Visual mode move the text right or left.
+Also for a block selection.  #8558
+
 Add optional argument to virtcol() that specifies "start", "cursor" or "end"
 to tell which value from getvvcol() should be used. (#7964)
 Value returned by virtcol() changes depending on how lines wrap.  This is
@@ -283,7 +303,7 @@ globpath() does not use 'wildignorecase' at all?
 Add 'termguiattr' option, use "gui=" attributes in the terminal?  Would work
 with 'termguicolors'. #1740
 
-Patch for blockwise paste reporting changes: #6660.
+Patch for blockwise paste reporting changes: #6660.  Asked for a PR.
 
 Patch to make fillchars global-local. (#5206)
 
@@ -292,9 +312,6 @@ Missing filetype test for bashrc, PKGBUILD, etc.
 Add an option to not fetch terminal codes in xterm, to avoid flicker when t_Co
 changes.
 
-MS-Windows: instead of "edit with multiple Vims" use "Edit with Vim in
-multiple tabs". #8404
-
 When using ":bwipe!" also get rid of references to be buffer, e.g. in the
 jumplist and alternate file.
 
@@ -355,10 +372,6 @@ autocommands for the buffer lifecycle:
     BufIsRenamed  (after buffer ID gets another name)
 The buffer list and windows are locked, no changes possible
 
-Add a ModeChanged autocommand that has an argument indicating the old and new
-mode, as what's returned from mode().  Also used for switching Terminal mode.
-#8360, #7863, #7363
-
 Matchparen doesn't remove highlight after undo. (#7054)
 Is OK when syntax HL is active.
 
@@ -420,6 +433,9 @@ undo result wrong: Masato Nishihata, #4798
 After recovering from a swap file the undofile should not be used, it causes
 corruption.  (#6631)
 
+When the computer crashes while writing the undofile, the contents may be
+lost.  Write to a temp file, fsync and rename. (#8879)
+
 When 'lazyredraw' is set sometimes the title is not updated.
 (Jason Franklin, 2020 Feb 3)  Looks like a race condition.
 
@@ -617,24 +633,27 @@ Window size changes after closing a tab. (#4741)
 
 Problem with colors in terminal window. (Jason Franklin, 2019 May 12)
 
-Lifepillar: Updated/cleaned up color schemes:
-https://github.com/lifepillar/vim8-colorschemes.
-
-Include a few color schemes, based on popularity:
-http://www.vim.org/scripts/script_search_results.php?keywords=&script_type=color+scheme&order_by=rating&direction=descending&search=search
+Color schemes:
+NOTE: modernizing the default colorschemes _AND_ introducing new ones is now
+a project in its own right: https://github.com/vim/colorschemes. Feel free to
+reach out if you want to lend a hand.
+- Lifepillar: Updated/cleaned up color schemes:
+  https://github.com/lifepillar/vim8-colorschemes.
+- Include a few color schemes, based on popularity:
+  - http://www.vim.org/scripts/script_search_results.php?keywords=&script_type=color+scheme&order_by=rating&direction=descending&search=search
 http://vimawesome.com/?q=tag:color-scheme
-Use names that indicate their appearance (Christian Brabandt, 2017 Aug 3)
-- monokai - Xia Crusoe (2017 Aug 4)
-- seoul256 - Christian Brabandt (2017 Aug 3)
-- gruvbox -  Christian Brabandt (2017 Aug 3) (simplified version from
-      Lifepillar, 2018 Jan 22, #2573)
-- janah - Marco Hinz (2017 Aug 4)
-- apprentice - Romain Lafourcade (2017 Aug 6)  remarks about help file #1964
-Suggested by Hiroki Kokubun:
-- [Iceberg](https://github.com/cocopon/iceberg.vim) (my one)
-- [hybrid](https://github.com/w0ng/vim-hybrid)
-Include solarized color scheme?, it does not support termguicolors.
-- Sanitized version of pablo (Lifepillar, 2017 Nov 21)
+- Use names that indicate their appearance (Christian Brabandt, 2017 Aug 3)
+  - monokai - Xia Crusoe (2017 Aug 4)
+  - seoul256 - Christian Brabandt (2017 Aug 3)
+  - gruvbox -  Christian Brabandt (2017 Aug 3) (simplified version from
+        Lifepillar, 2018 Jan 22, #2573)
+  - janah - Marco Hinz (2017 Aug 4)
+  - apprentice - Romain Lafourcade (2017 Aug 6)  remarks about help file #1964
+- Suggested by Hiroki Kokubun:
+  - [Iceberg](https://github.com/cocopon/iceberg.vim) (my one)
+  - [hybrid](https://github.com/w0ng/vim-hybrid)
+- Include solarized color scheme?, it does not support termguicolors.
+  - Sanitized version of pablo (Lifepillar, 2017 Nov 21)
 
 Bug: "vipgw" does not put cursor back where it belongs. (Jason Franklin, 2019
 Mar 5)
@@ -711,9 +730,6 @@ tab page. (Ingo Karkat, #4324)
 This modeline throws unexpected errors: (#4165)
     vim: syn=nosyntax
 
-":doau SomeEvent" gives "No matching autocommands".  This message doesn't give
-a hint about how to fix it. (#4300)
-
 Make balloon_show() work outside of 'balloonexpr'?  Users expect it to work:
 #2948. (related to #1512?)
 Also see #2352, want better control over balloon, perhaps set the position.
@@ -1033,6 +1049,9 @@ matchit hasn't been maintained for a long time.  #955.
 
 Problem with 'delcombine'. (agguser, 2017 Nov 10, #2313)
 
+'delcombine' does not work for the command line. (Tony Mechelynck, 2009 Jul
+20)
+
 MS-Windows: buffer completion doesn't work when using backslash (or slash)
 for a path separator. (xtal8, #2201)
 
@@ -2294,9 +2313,6 @@ for GTK clipboard.  Avoid requirement for iconv.
 
 Now that colnr_T is int instead of unsigned, more type casts can be removed.
 
-'delcombine' does not work for the command line. (Tony Mechelynck, 2009 Jul
-20)
-
 Don't load macmap.vim on startup, turn it into a plugin. (Ron Aaron,
 2009 Apr 7)  Reminder Apr 14.
 
@@ -3069,7 +3085,7 @@ Awaiting updated patches:
 7   When 'rightleft' is set, the search pattern should be displayed right
     to left as well?  See patch of Dec 26. (Nadim Shaikli)
 8   Option to lock all used memory so that it doesn't get swapped to disk
-    (uncrypted).  Patch by Jason Holt, 2003 May 23.  Uses mlock.
+    (unencrypted).  Patch by Jason Holt, 2003 May 23.  Uses mlock.
 7   Add ! register, for shell commands. (patch from Grenie)
 8   In the gzip plugin, also recognize *.gz.orig, *.gz.bak, etc.  Like it's
     done for filetype detection.  Patch from Walter Briscoe, 2003 Jul 1.
@@ -4150,6 +4166,9 @@ Printing:
 
 
 Syntax highlighting:
+    Long term goal: faster, better, etc.  Options:
+    - use treesitter, NeoVim uses it
+    - use TextMate, vscode uses it.  #9087
 8   Make ":syn off" use 'runtimepath' instead of $VIMRUNTIME. (Gary Johnson)
     Should do the same for ":syn on" and ":syn manual".
 8   Support "containedin" argument for ":syn include", so that the defined
@@ -4837,7 +4856,6 @@ Autocommands:
     command used dos fileformat.  Same for 'fileencoding'.
 -   Add events to autocommands:
     Error	    - When an error happens
-    ModeChange	    - after changing mode (before waiting for a char)
     VimLeaveCheck    - Before Vim decides to exit, so that it can be cancelled
 		      when exiting isn't a good idea.
     CursorHoldC     - CursorHold while command-line editing

runtime/doc/usr_06.txt

@@ -1,4 +1,4 @@
-*usr_06.txt*	For Vim version 8.2.  Last change: 2019 Jun 01
+*usr_06.txt*	For Vim version 8.2.  Last change: 2021 Nov 07
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -184,7 +184,30 @@ this command: >
 	:runtime syntax/colortest.vim
 
 You will see text in various color combinations.  You can check which ones are
-readable and look nice.
+readable and look nice. These aren't the only colors available to you though.
+You can specify #rrggbb hex colors and you can define new names for hex
+colors in |v:colornames| like so: >
+
+	let v:colornames['mine_red'] = '#aa0000'
+<
+If you are authoring a color scheme for others to use, it is important
+to define these colors only when they do not exist: >
+
+	call extend(v:colornames, {'mine_red': '#aa0000'}, 'keep')
+
+This allows users of the color scheme to override the precise definition of
+that color prior to loading your color scheme. For example, in a |.vimrc|
+file:
+
+	runtime colors/lists/css_colors.vim
+	let v:colornames['your_red'] = v:colornames['css_red']
+	colorscheme yourscheme
+
+As a color scheme author, you should be able to rely on some color names for
+GUI colors. These are defined in `colors/lists/default.vim`. All such files
+found on the |'runtimepath'| are loaded each time the colorscheme command is
+run. A canonical list is provided by the vim distribution, which should
+include all X11 colors (previously defined in rgb.txt).
 
 ==============================================================================
 *06.4*	With colors or without colors

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 8.2.  Last change: 2021 Jun 07
+*usr_41.txt*	For Vim version 8.2.  Last change: 2021 Sep 10
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -723,6 +723,10 @@ Floating point computation:				*float-functions*
 	isinf()			check for infinity
 	isnan()			check for not a number
 
+Blob manipulation:					*blob-functions*
+	blob2list()		get a list of numbers from a blob
+	list2blob()		get a blob from a list of numbers
+
 Other computation:					*bitwise-function*
 	and()			bitwise AND
 	invert()		bitwise invert
@@ -921,6 +925,8 @@ Syntax and highlighting:	  *syntax-functions* *highlighting-functions*
 	getmatches()		get all matches defined by |matchadd()| and
 				the |:match| commands
 	hlexists()		check if a highlight group exists
+	hlget()			get highlight group attributes
+	hlset()			set highlight group attributes
 	hlID()			get ID of a highlight group
 	synID()			get syntax ID at a specific position
 	synIDattr()		get a specific attribute of a syntax ID
@@ -994,6 +1000,10 @@ Window size and position:			*window-size-functions*
 	winrestview()		restore saved view of current window
 
 Mappings and Menus:			    *mapping-functions*
+	digraph_get()		get |digraph|
+	digraph_getlist()	get all |digraph|s
+	digraph_set()		register |digraph|
+	digraph_setlist()	register multiple |digraph|s
 	hasmapto()		check if a mapping exists
 	mapcheck()		check if a matching mapping exists
 	maparg()		get rhs of a mapping
@@ -1157,6 +1167,7 @@ Prompt Buffer:					*promptbuffer-functions*
 
 Text Properties:				*text-property-functions*
 	prop_add()		attach a property at a position
+	prop_add_list()		attach a property at multiple positions
 	prop_clear()		remove all properties from a line or lines
 	prop_find()		search for a property
 	prop_list()		return a list of all properties in a line
@@ -1178,6 +1189,7 @@ Various:					*various-functions*
 	state()			get current busy state
 	visualmode()		last visual mode used
 	exists()		check if a variable, function, etc. exists
+	exists_compiled()	like exists() but check at compile time
 	has()			check if a feature is supported in Vim
 	changenr()		return number of most recent change
 	cscope_connection()	check if a cscope connection exists
@@ -1443,6 +1455,8 @@ is a List with arguments.
 Function references are most useful in combination with a Dictionary, as is
 explained in the next section.
 
+More information about defining your own functions here: |user-functions|.
+
 ==============================================================================
 *41.8*	Lists and Dictionaries
 

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 8.2.  Last change: 2021 Mar 23
+*various.txt*   For Vim version 8.2.  Last change: 2021 Sep 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -170,8 +170,13 @@ g8			Print the hex values of the bytes used in the
 			If the mark is "=", a line of dashes is printed
 			around the current line.
 
-:[range]z#[+-^.=][count]				*:z#*
-			Like ":z", but number the lines.
+							*:z!*
+:[range]z![+-^.=][count]
+			Like ":z", but when [count] is not specified, it
+			defaults to the Vim window height minus one.
+
+:[range]z[!]#[+-^.=][count]				*:z#*
+			Like ":z" or ":z!", but number the lines.
 
 							*:=*
 := [flags]		Print the last line number.
@@ -418,7 +423,7 @@ N  *+multi_lang*	non-English language support |multi-lang|
 m  *+mzscheme*		Mzscheme interface |mzscheme|
 m  *+mzscheme/dyn*	Mzscheme interface |mzscheme-dynamic| |/dyn|
 m  *+netbeans_intg*	|netbeans|
-   *+num64*		64-bit Number support |Number| 
+   *+num64*		64-bit Number support |Number|
    			Always enabled since 8.2.0271, use v:numbersize to
 			check the actual size of a Number.
 m  *+ole*		Win32 GUI only: |ole-interface|

runtime/doc/version6.txt

@@ -5465,7 +5465,7 @@ Files:	    src/fileio.c
 Patch 6.0.267
 Problem:    UTF-8: Although 'isprint' says a character is printable,
 	    utf_char2cells() still considers it unprintable.
-Solution:   Use vim_isprintc() for characters upto 0x100. (Yasuhiro Matsumoto)
+Solution:   Use vim_isprintc() for characters up to 0x100. (Yasuhiro Matsumoto)
 Files:	    src/mbyte.c
 
 Patch 6.0.268 (extra) (depends on patch 6.0.255)
@@ -12232,7 +12232,7 @@ Files:	    Makefile, src/gvim.exe.mnf, src/vim.rc
 
 Patch 6.2.348
 Problem:    Win32: "vim c:\dir\(test)" doesn't work, because the 'isfname'
-	    default value doesn't contain parenthesis.
+	    default value doesn't contain parentheses.
 Solution:   Temporarily add '(' and ')' to 'isfname' when expanding file name
 	    arguments.
 Files:	    src/main.c

runtime/doc/version7.txt

@@ -1,4 +1,4 @@
-*version7.txt*  For Vim version 8.2.  Last change: 2021 May 13
+*version7.txt*  For Vim version 8.2.  Last change: 2021 May 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -16225,7 +16225,7 @@ Files:	    src/regexp_nfa.c, src/testdir/test64.in, src/testdir/test64.ok,
 Patch 7.3.1018
 Problem:    New regexp engine wastes memory.
 Solution:   Allocate prog with actual number of states, not estimated maximum
-	    number of sates.
+	    number of states.
 Files:	    src/regexp_nfa.c
 
 Patch 7.3.1019

runtime/doc/version8.txt

@@ -1,4 +1,4 @@
-*version8.txt*  For Vim version 8.2.  Last change: 2021 May 13
+*version8.txt*  For Vim version 8.2.  Last change: 2021 Jul 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -41,6 +41,10 @@ See |vi_diff.txt| for an overview of differences between Vi and Vim 8.0.
 See |version4.txt|, |version5.txt|, |version6.txt| and |version7.txt| for
 differences between other versions.
 
+							*vim-changelog*
+You can find an overview of the most important changes (according to Martin
+Tournoij) on this site: https://www.arp242.net/vimlog/
+
 ==============================================================================
 NEW FEATURES						*new-8*
 
@@ -12980,7 +12984,7 @@ Files:      src/evalfunc.c, src/testdir/test_cmdline.vim
 Patch 7.4.2113
 Problem:    Test for undo is flaky.
 Solution:   Turn it into a new style test.  Use test_settime() to avoid
-            flakyness.
+            flakiness.
 Files:      src/Makefile, src/undo.c, src/testdir/test61.in,
             src/testdir/test61.ok, src/testdir/test_undo.vim,
             src/testdir/test_undolevels.vim, src/testdir/Make_all.mak,
@@ -30906,7 +30910,7 @@ Files:	    src/eval.c, src/testdir/test_assert.vim
 Patch 8.1.0820
 Problem:    Test for sending large data over channel sometimes fails.
 Solution:   Handle that the job may have finished early.  Also fix that file
-            changed test doesn't work in the GUI and reduce flakyness. (Ozaki
+            changed test doesn't work in the GUI and reduce flakiness. (Ozaki
             Kiichi, closes #3861)
 Files:	    src/testdir/test_channel.vim, src/testdir/test_filechanged.vim
 
@@ -39253,7 +39257,7 @@ Files:	    src/option.c
 
 Patch 8.1.2117
 Problem:    CursorLine highlight used while 'cursorline' is off.
-Solution:   Check 'cursorline' is set. (cloes #5017)
+Solution:   Check 'cursorline' is set. (closes #5017)
 Files:	    src/drawline.c, src/testdir/test_cursorline.vim
 
 Patch 8.1.2118

runtime/doc/vim9.txt

@@ -1,4 +1,4 @@
-*vim9.txt*	For Vim version 8.2.  Last change: 2021 Jul 07
+*vim9.txt*	For Vim version 8.2.  Last change: 2021 Sep 13
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -103,9 +103,12 @@ script and `:def` functions; details are below:
 	writefile(['done'], 'file.txt')
 - You cannot use `:xit`, `:t`, `:k`, `:append`, `:change`, `:insert`, `:open`,
   and `:s` or `:d` with only flags.
-  or curly-braces names.
+- You cannot use curly-braces names.
 - A range before a command must be prefixed with a colon: >
 	:%s/this/that
+- Executing a register with "@r" does not work, you can prepend a colon or use
+  `:exe`: >
+  	:exe @a
 - Unless mentioned specifically, the highest |scriptversion| is used.
 
 
@@ -154,7 +157,7 @@ Compilation is done when any of these is encountered:
   function was defined
 - `:disassemble` is used for the function.
 - a function that is compiled calls the function or uses it as a function
-  reference
+  reference (so that the argument and return types can be checked)
 							*E1091*
 If compilation fails it is not tried again on the next call, instead this
 error is given: "E1091: Function is not compiled: {name}".
@@ -168,7 +171,7 @@ created yet.  In this case you can call `execute()` to invoke it at runtime. >
 "closure".  A `:def` function always aborts on an error (unless `:silent!` was
 used for the command or inside a `:try` block), does not get a range passed
 cannot be a "dict" function, and can always be a closure.
-
+						*vim9-no-dict-function*
 Later classes will be added, which replaces the "dict function" mechanism.
 For now you will need to pass the dictionary explicitly: >
 	def DictFunc(d: dict<any>, arg: string)
@@ -177,6 +180,15 @@ For now you will need to pass the dictionary explicitly: >
 	var d = {item: 'value', func: DictFunc}
 	d.func(d, 'item')
 
+You can call a legacy dict function though: >
+	func Legacy() dict
+	  echo self.value
+	endfunc
+	def CallLegacy()
+	  var d = {func: Legacy, value: 'text'}
+	  d.func()
+	enddef
+
 The argument types and return type need to be specified.  The "any" type can
 be used, type checking will then be done at runtime, like with legacy
 functions.
@@ -194,7 +206,7 @@ When a function argument is optional (it has a default value) passing `v:none`
 as the argument results in using the default value.  This is useful when you
 want to specify a value for an argument that comes after an argument that
 should use its default value.  Example: >
-	def MyFunc(one = 'one', last = 'last)
+	def MyFunc(one = 'one', last = 'last')
 	  ...
 	enddef
 	MyFunc(v:none, 'LAST')  # first argument uses default value 'one'
@@ -321,6 +333,25 @@ used: >
 	}
 	echo temp  # Error!
 
+This is especially useful in a user command: >
+
+	command -range Rename {
+		 var save = @a
+		 @a = 'some expression'
+		 echo 'do something with ' .. @a
+		 @a = save
+	    }
+
+And with autocommands: >
+
+   au BufWritePre *.go {
+		 var save = winsaveview()
+		 silent! exe ':%! some formatting command'
+		 winrestview(save)
+	   }
+
+Although using a :def function probably works better.
+
 Declaring a variable with a type but without an initializer will initialize to
 zero, false or empty.
 
@@ -332,6 +363,9 @@ with `:unlet`.
 `:lockvar` does not work on local variables.  Use `:const` and `:final`
 instead.
 
+The `exists()` and `exists_compiled()` functions do not work on local variables
+or arguments.
+
 Variables, functions and function arguments cannot shadow previously defined
 or imported variables and functions in the same script file.
 Variables may shadow Ex commands, rename the variable if needed.
@@ -351,6 +385,32 @@ called without "g:". >
 	echo GlobalFunc()
 The "g:" prefix is not needed for auto-load functions.
 
+					*vim9-function-defined-later*
+Although global functions can be called without the "g:" prefix, they must
+exist when compiled.  By adding the "g:" prefix the function can be defined
+later.  Example: >
+	def CallPluginFunc()
+	  if exists('g:loaded_plugin')
+	    g:PluginFunc()
+	  endif
+	enddef
+
+If you would do it like this you get an error at compile time that
+"PluginFunc" does not exist, even when "g:loaded_plugin" does not exist: >
+	def CallPluginFunc()
+	  if exists('g:loaded_plugin')
+	    PluginFunc()   # Error - function not found
+	  endif
+	enddef
+
+You can use exists_compiled() to avoid the error, but then the function would
+not be called, even when "g:loaded_plugin" is defined later: >
+	def CallPluginFunc()
+	  if exists_compiled('g:loaded_plugin')
+	    PluginFunc()   # Function may never be called
+	  endif
+	enddef
+
 Since `&opt = value` is now assigning a value to option "opt", ":&" cannot be
 used to repeat a `:substitute` command.
 							*vim9-unpack-ignore*
@@ -426,6 +486,12 @@ line starts with `substitute(` this will use the function. Prepend a colon to
 use the command instead: >
 	:substitute(pattern (replacement (
 
+If the expression starts with "!" this is interpreted as a shell command, not
+negation of a condition.  Thus this is a shell command: >
+	!shellCommand->something
+Put the expression in parentheses to use the "!" for negation: >
+	(!expression)->Method()
+
 Note that while variables need to be defined before they can be used,
 functions can be called before being defined.  This is required to allow
 for cyclic dependencies between functions.  It is slightly less efficient,
@@ -565,7 +631,7 @@ at the start of the line indicates line continuation: >
 		|   echo 'match'
 		| endif
 
-Note that this means that in heredoc the first line cannot be a bar: >
+Note that this means that in heredoc the first line cannot start with a bar: >
 	var lines =<< trim END
 	   | this doesn't work
 	END
@@ -573,7 +639,7 @@ Either use an empty line at the start or do not use heredoc.  Or temporarily
 add the "C" flag to 'cpoptions': >
 	set cpo+=C
 	var lines =<< trim END
-	   | this doesn't work
+	   | this works
 	END
 	set cpo-=C
 If the heredoc is inside a function 'cpoptions' must be set before :def and
@@ -687,6 +753,9 @@ White space is not allowed:
 	      arg	   # OK
 	      )
 
+White space is not allowed in a `:set` command between the option name and a
+following "&", "!", "<", "=", "+=", "-=" or "^=".
+
 
 No curly braces expansion ~
 
@@ -873,9 +942,22 @@ Ex command ranges need to be prefixed with a colon. >
 
 Some Ex commands can be confused with assignments in Vim9 script: >
 	g:name = value    # assignment
-	g:pattern:cmd	  # invalid command - ERROR
 	:g:pattern:cmd	  # :global command
 
+To avoid confusion between a `:global` or `:substitute` command and an
+expression or assignment, a few separators cannot be used when these commands
+are abbreviated to a single character: ':', '-' and '.'. >
+	g:pattern:cmd	  # invalid command - ERROR
+	s:pattern:repl	  # invalid command - ERROR
+	g-pattern-cmd	  # invalid command - ERROR
+	s-pattern-repl	  # invalid command - ERROR
+	g.pattern.cmd	  # invalid command - ERROR
+	s.pattern.repl	  # invalid command - ERROR
+
+Also, there cannot be a space between the command and the separator: >
+	g /pattern/cmd	  # invalid command - ERROR
+	s /pattern/repl	  # invalid command - ERROR
+
 Functions defined with `:def` compile the whole function.  Legacy functions
 can bail out, and the following lines are not parsed: >
 	func Maybe()
@@ -909,7 +991,8 @@ evaluates to false: >
 	    use-feature
 	  endif
 	enddef
-<							*vim9-user-command*
+The `exists_compiled()` function can also be used for this.
+							*vim9-user-command*
 Another side effect of compiling a function is that the presence of a user
 command is checked at compile time.  If the user command is defined later an
 error will result.  This works: >
@@ -1035,7 +1118,7 @@ The map argument is a string expression, which is evaluated without the
 function scope.  Instead, use a lambda: >
 	def MapList(): list<string>
 	  var list = ['aa', 'bb', 'cc', 'dd']
-	  return range(1, 2)->map(( _, v) => list[v])
+	  return range(1, 2)->map((_, v) => list[v])
 	enddef
 
 The same is true for commands that are not compiled, such as `:global`.
@@ -1045,26 +1128,36 @@ For these the backtick expansion can be used.  Example: >
 	  g/pattern/s/^/`=newText`/
 	enddef
 
+Or a script variable can be used: >
+	var newText = 'blah'
+	def Replace()
+	  g/pattern/s/^/\=newText/
+	enddef
+
 Closures defined in a loop will share the same context.  For example: >
 	var flist: list<func>
-	for i in range(10)
+	for i in range(5)
 	  var inloop = i
 	  flist[i] = () => inloop
 	endfor
+	echo range(5)->map((i, _) => flist[i]())
+	# Result: [4, 4, 4, 4, 4]
 
 The "inloop" variable will exist only once, all closures put in the list refer
-to the same instance, which in the end will have the value 9.  This is
-efficient.  If you do want a separate context for each closure call a function
-to define it: >
-	def GetFunc(i: number): func
-	  var inloop = i
-	  return () => inloop
+to the same instance, which in the end will have the value 4.  This is
+efficient, also when looping many times.  If you do want a separate context
+for each closure call a function to define it: >
+	def GetClosure(i: number): func
+	  var infunc = i
+	  return () => infunc
 	enddef
 
 	var flist: list<func>
-	for i in range(10)
-	  flist[i] = GetFunc(i)
+	for i in range(5)
+	  flist[i] = GetClosure(i)
 	endfor
+	echo range(5)->map((i, _) => flist[i]())
+	# Result: [0, 1, 2, 3, 4]
 
 ==============================================================================
 
@@ -1229,16 +1322,16 @@ an error, thus breaking backwards compatibility.  For example:
 - Using a string value when setting a number option.
 - Using a number where a string is expected.   *E1024*
 
-One consequence is that the item type of a list or dict given to map() must
+One consequence is that the item type of a list or dict given to |map()| must
 not change.  This will give an error in Vim9 script: >
-	vim9 echo map([1, 2, 3], (i, v) => 'item ' .. i)
+	echo map([1, 2, 3], (i, v) => 'item ' .. i)
 	E1012: Type mismatch; expected number but got string
-Instead use |mapnew(): >
-	vim9 echo mapnew([1, 2, 3], (i, v) => 'item ' .. i)
+Instead use |mapnew()|: >
+	echo mapnew([1, 2, 3], (i, v) => 'item ' .. i)
 	['item 0', 'item 1', 'item 2']
 
 If the item type was determined to be "any" it can change to a more specific
-type.  E.g. when a list of mixed types gets changed to a list of numbers: >
+type.  E.g. when a list of mixed types gets changed to a list of strings: >
 	var mylist = [1, 2.0, '3']
 	# typename(mylist) == "list<any>"
 	map(mylist, (i, v) => 'item ' .. i)
@@ -1345,15 +1438,17 @@ In case the name is ambiguous, another name can be specified: >
 To import all exported items under a specific identifier: >
 	import * as That from 'thatscript.vim'
 
-{not implemented yet: using "This as That"}
-
 Then you can use "That.EXPORTED_CONST", "That.someValue", etc.  You are free
 to choose the name "That", but it is highly recommended to use the name of the
-script file to avoid confusion.
+script file to avoid confusion.  Also avoid command names, because the name
+will shadow them.
 
 `:import` can also be used in legacy Vim script.  The imported items still
 become script-local, even when the "s:" prefix is not given.
 
+`:import` can not be used in a function.  Imported items are intended to exist
+at the script level and only imported once.
+
 The script name after `import` can be:
 - A relative path, starting "." or "..".  This finds a file relative to the
   location of the script file itself.  This is useful to split up a large
@@ -1363,6 +1458,7 @@ The script name after `import` can be:
 - A path not being relative or absolute.  This will be found in the
   "import" subdirectories of 'runtimepath' entries.  The name will usually be
   longer and unique, to avoid loading the wrong file.
+  Note that "after/import" is not used.
 
 Once a vim9 script file has been imported, the result is cached and used the
 next time the same script is imported.  It will not be read again.
@@ -1453,7 +1549,7 @@ Some examples: >
 	    var name: string
 	    
 	    def constructor(name: string)
-		this.name = name;
+		this.name = name
 	    enddef
 
 	    def display(): void

runtime/doc/windows.txt

@@ -1,4 +1,4 @@
-*windows.txt*   For Vim version 8.2.  Last change: 2021 Apr 10
+*windows.txt*   For Vim version 8.2.  Last change: 2021 Sep 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -296,7 +296,7 @@ Closing a window
 ----------------
 
 :q[uit]
-:{count}q[uit]
+:{count}q[uit]						*:count_quit*
 CTRL-W q						*CTRL-W_q*
 CTRL-W CTRL-Q						*CTRL-W_CTRL-Q*
 		Without {count}: Quit the current window.  If {count} is
@@ -390,7 +390,8 @@ CTRL-W CTRL-C						*CTRL-W_CTRL-C*
 CTRL-W o						*CTRL-W_o* *E445*
 CTRL-W CTRL-O					*CTRL-W_CTRL-O* *:on* *:only*
 		Make the current window the only one on the screen.  All other
-		windows are closed.  For {count} see |:quit| command.
+		windows are closed.  For {count} see the `:quit` command
+		above |:count_quit|.
 
 		When the 'hidden' option is set, all buffers in closed windows
 		become hidden.
@@ -1357,6 +1358,7 @@ directory	Displays directory contents.  Can be used by a file explorer
 <		The buffer name is the name of the directory and is adjusted
 		when using the |:cd| command.
 
+						*scratch-buffer*
 scratch		Contains text that can be discarded at any time.  It is kept
 		when closing the window, it must be deleted explicitly.
 		Settings: >

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Jul 03
+" Last Change:	2021 Oct 03
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -488,7 +488,7 @@ au BufNewFile,BufRead *.desktop,*.directory	setf desktop
 au BufNewFile,BufRead dict.conf,.dictrc		setf dictconf
 
 " Dictd config
-au BufNewFile,BufRead dictd.conf		setf dictdconf
+au BufNewFile,BufRead dictd*.conf		setf dictdconf
 
 " Diff files
 au BufNewFile,BufRead *.diff,*.rej		setf diff
@@ -537,8 +537,13 @@ au BufNewFile,BufRead *.drac,*.drc,*lvs,*lpe	setf dracula
 " Datascript
 au BufNewFile,BufRead *.ds			setf datascript
 
-" dsl
-au BufNewFile,BufRead *.dsl			setf dsl
+" dsl: DSSSL or Structurizr
+au BufNewFile,BufRead *.dsl
+	\ if getline(1) =~ '^\s*<\!' |
+	\   setf dsl |
+	\ else |
+	\   setf structurizr |
+	\ endif
 
 " DTD (Document Type Definition for XML)
 au BufNewFile,BufRead *.dtd			setf dtd
@@ -642,7 +647,7 @@ au BufNewFile,BufRead *.fsl			setf framescript
 au BufNewFile,BufRead fstab,mtab		setf fstab
 
 " GDB command files
-au BufNewFile,BufRead .gdbinit			setf gdb
+au BufNewFile,BufRead .gdbinit,gdbinit		setf gdb
 
 " GDMO
 au BufNewFile,BufRead *.mo,*.gdmo		setf gdmo
@@ -702,6 +707,7 @@ au BufNewFile,BufRead *.gpi			setf gnuplot
 
 " Go (Google)
 au BufNewFile,BufRead *.go			setf go
+au BufNewFile,BufRead Gopkg.lock		setf toml
 
 " GrADS scripts
 au BufNewFile,BufRead *.gs			setf grads
@@ -871,9 +877,15 @@ au BufNewFile,BufRead *.json-patch			setf json
 " Jupyter Notebook is also json
 au BufNewFile,BufRead *.ipynb				setf json
 
+" Other files that look like json
+au BufNewFile,BufRead .babelrc,.eslintrc,.prettierrc,.firebaserc  setf json
+
 " JSONC
 au BufNewFile,BufRead *.jsonc			setf jsonc
 
+" Julia
+au BufNewFile,BufRead *.jl			setf julia
+
 " Kixtart
 au BufNewFile,BufRead *.kix			setf kix
 
@@ -1021,7 +1033,7 @@ au BufNewFile,BufRead *.markdown,*.mdown,*.mkd,*.mkdn,*.mdwn,*.md  setf markdown
 " Mason
 au BufNewFile,BufRead *.mason,*.mhtml,*.comp	setf mason
 
-" Mathematica, Matlab, Murphi or Objective C
+" Mathematica, Matlab, Murphi, Objective C or Octave
 au BufNewFile,BufRead *.m			call dist#ft#FTm()
 
 " Mathematica notebook
@@ -1084,6 +1096,9 @@ au BufNewFile,BufRead *.moo			setf moo
 " Modconf
 au BufNewFile,BufRead */etc/modules.conf,*/etc/modules,*/etc/conf.modules setf modconf
 
+" MPD is based on XML
+au BufNewFile,BufRead *.mpd			setf xml
+
 " Mplayer config
 au BufNewFile,BufRead mplayer.conf,*/.mplayer/config	setf mplayerconf
 
@@ -1102,6 +1117,9 @@ au BufNewFile,BufRead *.mysql			setf mysql
 " Mutt setup files (must be before catch *.rc)
 au BufNewFile,BufRead */etc/Muttrc.d/*		call s:StarSetf('muttrc')
 
+" Tcl Shell RC file
+au BufNewFile,BufRead tclsh.rc			setf tcl
+
 " M$ Resource files
 au BufNewFile,BufRead *.rc,*.rch		setf rc
 
@@ -1132,6 +1150,9 @@ au BufNewFile,BufRead Neomuttrc			setf neomuttrc
 " Netrc
 au BufNewFile,BufRead .netrc			setf netrc
 
+" Nginx
+au BufNewFile,BufRead *.nginx,nginx*.conf,*nginx.conf,*/etc/nginx/*,*/usr/local/nginx/conf/*,*/nginx/*.conf			setf nginx
+
 " Ninja file
 au BufNewFile,BufRead *.ninja			setf ninja
 
@@ -1167,6 +1188,9 @@ au BufNewFile,BufRead *.ml,*.mli,*.mll,*.mly,.ocamlinit,*.mlt,*.mlp,*.mlip,*.mli
 " Occam
 au BufNewFile,BufRead *.occ			setf occam
 
+" Octave
+au BufNewFile,BufRead octave.conf,.octaverc,octaverc	setf octave
+
 " Omnimark
 au BufNewFile,BufRead *.xom,*.xin		setf omnimark
 
@@ -1267,7 +1291,7 @@ au BufNewFile,BufRead *.rcp			setf pilrc
 au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex		setf pine
 
 " Pipenv Pipfiles
-au BufNewFile,BufRead Pipfile			setf config
+au BufNewFile,BufRead Pipfile			setf toml
 au BufNewFile,BufRead Pipfile.lock		setf json
 
 " PL/1, PL/I
@@ -1375,6 +1399,9 @@ au BufNewFile,BufRead *.pk			setf poke
 " Protocols
 au BufNewFile,BufRead */etc/protocols		setf protocols
 
+" Pyret
+au BufNewFile,BufRead *.arr			setf pyret
+
 " Pyrex
 au BufNewFile,BufRead *.pyx,*.pxd		setf pyrex
 
@@ -1386,7 +1413,7 @@ au BufNewFile,BufRead *.ptl,*.pyi,SConstruct		   setf python
 " Radiance
 au BufNewFile,BufRead *.rad,*.mat		setf radiance
 
-" Raku (formelly Perl6)
+" Raku (formerly Perl6)
 au BufNewFile,BufRead *.pm6,*.p6,*.t6,*.pod6,*.raku,*.rakumod,*.rakudoc,*.rakutest  setf raku
 
 " Ratpoison config/command files
@@ -1466,6 +1493,9 @@ au BufNewFile,BufRead robots.txt		setf robots
 " Rpcgen
 au BufNewFile,BufRead *.x			setf rpcgen
 
+" MikroTik RouterOS script
+au BufRead,BufNewFile *.rsc			setf routeros
+
 " reStructuredText Documentation Format
 au BufNewFile,BufRead *.rst			setf rst
 
@@ -1498,6 +1528,7 @@ au BufNewFile,BufRead [rR]antfile,*.rant,[rR]akefile,*.rake	setf ruby
 
 " Rust
 au BufNewFile,BufRead *.rs			setf rust
+au BufNewFile,BufRead Cargo.lock,*/.cargo/config,*/.cargo/credentials	setf toml
 
 " S-lang (or shader language, or SmallLisp)
 au BufNewFile,BufRead *.sl			setf slang
@@ -1523,6 +1554,9 @@ au BufNewFile,BufRead *.sbt			setf sbt
 " Scilab
 au BufNewFile,BufRead *.sci,*.sce		setf scilab
 
+" scdoc
+au BufNewFile,BufRead *.scd			setf scdoc
+
 " SCSS
 au BufNewFile,BufRead *.scss			setf scss
 
@@ -1612,7 +1646,7 @@ au BufNewFile,BufRead .zshrc,.zshenv,.zlogin,.zlogout,.zcompdump setf zsh
 au BufNewFile,BufRead *.zsh			setf zsh
 
 " Scheme
-au BufNewFile,BufRead *.scm,*.ss,*.rkt		setf scheme
+au BufNewFile,BufRead *.scm,*.ss,*.rkt,*.rktd,*.rktl 	setf scheme
 
 " Screen RC
 au BufNewFile,BufRead .screenrc,screenrc	setf screen
@@ -1785,7 +1819,7 @@ au BufRead,BufNewFile {pending,completed,undo}.data  setf taskdata
 au BufRead,BufNewFile *.task			setf taskedit
 
 " Tcl (JACL too)
-au BufNewFile,BufRead *.tcl,*.tk,*.itcl,*.itk,*.jacl	setf tcl
+au BufNewFile,BufRead *.tcl,*.tm,*.tk,*.itcl,*.itk,*.jacl,.tclshrc,.wishrc	setf tcl
 
 " TealInfo
 au BufNewFile,BufRead *.tli			setf tli
@@ -1979,14 +2013,15 @@ au BufNewFile,BufRead *.ws[fc]			setf wsh
 " XHTML
 au BufNewFile,BufRead *.xhtml,*.xht		setf xhtml
 
-" X Pixmap (dynamically sets colors, use BufEnter to make it work better)
-au BufEnter *.xpm
+" X Pixmap (dynamically sets colors, this used to trigger on BufEnter to make
+" it work better, but that breaks setting 'filetype' manually)
+au BufNewFile,BufRead *.xpm
 	\ if getline(1) =~ "XPM2" |
 	\   setf xpm2 |
 	\ else |
 	\   setf xpm |
 	\ endif
-au BufEnter *.xpm2				setf xpm2
+au BufNewFile,BufRead *.xpm2			setf xpm2
 
 " XFree86 config
 au BufNewFile,BufRead XF86Config
@@ -2121,7 +2156,7 @@ au BufNewFile,BufRead proftpd.conf*					call s:StarSetf('apachestyle')
 
 " More Apache config files
 au BufNewFile,BufRead access.conf*,apache.conf*,apache2.conf*,httpd.conf*,srm.conf*	call s:StarSetf('apache')
-au BufNewFile,BufRead */etc/apache2/*.conf*,*/etc/apache2/conf.*/*,*/etc/apache2/mods-*/*,*/etc/apache2/sites-*/*,*/etc/httpd/conf.d/*.conf*		call s:StarSetf('apache')
+au BufNewFile,BufRead */etc/apache2/*.conf*,*/etc/apache2/conf.*/*,*/etc/apache2/mods-*/*,*/etc/apache2/sites-*/*,*/etc/httpd/conf.*/*,*/etc/httpd/mods-*/*,*/etc/httpd/sites-*/*,*/etc/httpd/conf.d/*.conf*		call s:StarSetf('apache')
 
 " Asterisk config file
 au BufNewFile,BufRead *asterisk/*.conf*		call s:StarSetf('asterisk')
@@ -2275,6 +2310,9 @@ au BufNewFile,BufRead .tcshrc*	call dist#ft#SetFileTypeShell("tcsh")
 " csh scripts ending in a star
 au BufNewFile,BufRead .login*,.cshrc*  call dist#ft#CSH()
 
+" tmux configuration with arbitrary extension
+au BufNewFile,BufRead {.,}tmux*.conf*		setf tmux
+
 " VHDL
 au BufNewFile,BufRead *.vhdl_[0-9]*		call s:StarSetf('vhdl')
 

runtime/ftplugin/8th.vim

@@ -1,9 +1,10 @@
 " Vim ftplugin file
 " Language:	8th
 " Version:	any
-" Last Change:	2015/11/08
+" Last Change:	2021 Sep 20
+" Last Change:	2021/09/20
 " Maintainer:	Ron Aaron <ron@aaron-tech.com>
-" URL:          https://8th-dev.com/
+" URL:		https://8th-dev.com/
 " Filetypes:	*.8th
 " NOTE: 	8th allows any non-whitespace in a name, so you need to do:
 " 		setlocal iskeyword=!,@,33-35,%,$,38-64,A-Z,91-96,a-z,123-126,128-255
@@ -14,12 +15,13 @@ if exists("b:did_8thplugin")
  finish
 endif
 
-" Don't load another plugin for this buffer
+" Don't load another 8th plugin for this buffer
 let b:did_8thplugin = 1
 
 setlocal ts=2 sts=2 sw=2 et
-setlocal com=s1:/*,mb:*,ex:*/,:\|,:\\
+setlocal com=s1:/*,mb:*,ex:*/,b:--,be:\\
 setlocal fo=tcrqol
 setlocal matchpairs+=\::;
 setlocal iskeyword=!,@,33-35,%,$,38-64,A-Z,91-96,a-z,123-126,128-255
 setlocal suffixesadd=.8th
+let b:undo_ftplugin = "setlocal ts< sts< sw< et< com< fo< mps< isk< sua<"

runtime/ftplugin/c.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	C
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Feb 01
+" Last Change:	2021 Sep 21
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -40,8 +40,11 @@ endif
 
 " When the matchit plugin is loaded, this makes the % command skip parens and
 " braces in comments properly.
-let b:match_words = '^\s*#\s*if\(\|def\|ndef\)\>:^\s*#\s*elif\>:^\s*#\s*else\>:^\s*#\s*endif\>'
-let b:match_skip = 's:comment\|string\|character\|special'
+if !exists("b:match_words")
+  let b:match_words = '^\s*#\s*if\(\|def\|ndef\)\>:^\s*#\s*elif\>:^\s*#\s*else\>:^\s*#\s*endif\>'
+  let b:match_skip = 's:comment\|string\|character\|special'
+  let b:undo_ftplugin ..= " | unlet! b:match_skip b:match_words"
+endif
 
 " Win32 can filter files in the browse dialog
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
@@ -62,6 +65,7 @@ if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
 	  \ "C++ Source Files (*.cpp *.c++)\t*.cpp;*.c++\n" .
 	  \ "All Files (*.*)\t*.*\n"
   endif
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/changelog.vim

@@ -2,7 +2,7 @@
 " Language:             generic Changelog file
 " Maintainer:           Martin Florian <marfl@posteo.de>
 " Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2015-10-25
+" Latest Revision:      2021-10-17
 " Variables:
 "   g:changelog_timeformat (deprecated: use g:changelog_dateformat instead) -
 "       description: the timeformat used in ChangeLog entries.
@@ -55,7 +55,7 @@ if &filetype == 'changelog'
     elseif $EMAIL_ADDRESS != ""
       return $EMAIL_ADDRESS
     endif
-    
+
     let login = s:login()
     return printf('%s <%s@%s>', s:name(login), login, s:hostname())
   endfunction
@@ -223,12 +223,6 @@ if &filetype == 'changelog'
     let &paste = save_paste
   endfunction
 
-  if exists(":NewChangelogEntry") != 2
-    nnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
-    xnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
-    command! -nargs=0 NewChangelogEntry call s:new_changelog_entry('')
-  endif
-
   let b:undo_ftplugin = "setl com< fo< et< ai<"
 
   setlocal comments=
@@ -241,14 +235,26 @@ if &filetype == 'changelog'
     let b:undo_ftplugin .= " tw<"
   endif
 
+  if !exists("no_plugin_maps") && !exists("no_changelog_maps") && exists(":NewChangelogEntry") != 2
+    nnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
+    xnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
+    command! -buffer -nargs=0 NewChangelogEntry call s:new_changelog_entry('')
+    let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> <Leader>o'" .
+          \                " | sil! exe 'vunmap <buffer> <Leader>o'" .
+          \                " | sil! delc NewChangelogEntry"
+  endif
+
   let &cpo = s:cpo_save
   unlet s:cpo_save
 else
   let s:cpo_save = &cpo
   set cpo&vim
 
-  " Add the Changelog opening mapping
-  nnoremap <silent> <Leader>o :call <SID>open_changelog()<CR>
+  if !exists("no_plugin_maps") && !exists("no_changelog_maps")
+    " Add the Changelog opening mapping
+    nnoremap <silent> <Leader>o :call <SID>open_changelog()<CR>
+    let b:undo_ftplugin .= " | silent! exe 'nunmap <buffer> <Leader>o"
+  endif
 
   function! s:open_changelog()
     let path = expand('%:p:h')

runtime/ftplugin/chicken.vim

@@ -2,6 +2,7 @@
 " Last Change: 2018-03-05
 " Author: Evan Hanson <evhan@foldling.org>
 " Maintainer: Evan Hanson <evhan@foldling.org>
+" Repository: https://git.foldling.org/vim-scheme.git
 " URL: https://foldling.org/vim/ftplugin/chicken.vim
 " Notes: These are supplemental settings, to be loaded after the core
 " Scheme ftplugin file (ftplugin/scheme.vim). Enable it by setting

runtime/ftplugin/clojure.vim

@@ -1,11 +1,11 @@
 " Vim filetype plugin file
 " Language:           Clojure
-" Maintainer:         Alex Vear <av@axvr.io>
+" Maintainer:         Alex Vear <alex@vear.uk>
 " Former Maintainers: Sung Pae <self@sungpae.com>
 "                     Meikel Brandmeyer <mb@kotka.de>
 " URL:                https://github.com/clojure-vim/clojure.vim
 " License:            Vim (see :h license)
-" Last Change:        2021-02-13
+" Last Change:        2021-10-26
 
 if exists("b:did_ftplugin")
 	finish
@@ -17,7 +17,7 @@ set cpo&vim
 
 let b:undo_ftplugin = 'setlocal iskeyword< define< formatoptions< comments< commentstring< lispwords<'
 
-setlocal iskeyword+=?,-,*,!,+,/,=,<,>,.,:,$
+setlocal iskeyword+=?,-,*,!,+,/,=,<,>,.,:,$,%,&,\|
 
 " There will be false positives, but this is better than missing the whole set
 " of user-defined def* definitions.
@@ -43,7 +43,7 @@ setlocal commentstring=;\ %s
 " specially and hence are not indented specially.
 "
 " -*- LISPWORDS -*-
-" Generated from https://github.com/clojure-vim/clojure.vim/blob/f8594e7030cdfb0b7990ac92953c77a08a7220f0/clj/src/vim_clojure_static/generate.clj
+" Generated from https://github.com/clojure-vim/clojure.vim/blob/62b215f079ce0f3834fd295c7a7f6bd8cc54bcc3/clj/src/vim_clojure_static/generate.clj
 setlocal lispwords=as->,binding,bound-fn,case,catch,cond->,cond->>,condp,def,definline,definterface,defmacro,defmethod,defmulti,defn,defn-,defonce,defprotocol,defrecord,defstruct,deftest,deftest-,deftype,doseq,dotimes,doto,extend,extend-protocol,extend-type,fn,for,if,if-let,if-not,if-some,let,letfn,locking,loop,ns,proxy,reify,set-test,testing,when,when-first,when-let,when-not,when-some,while,with-bindings,with-in-str,with-local-vars,with-open,with-precision,with-redefs,with-redefs-fn,with-test
 
 " Provide insert mode completions for special forms and clojure.core. As
@@ -64,8 +64,8 @@ if exists('loaded_matchit')
 	let b:undo_ftplugin .= ' | unlet! b:match_words b:match_skip'
 endif
 
-" Win32 can filter files in the browse dialog
-if has("gui_win32") && !exists("b:browsefilter")
+" Filter files in the browse dialog
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
 	let b:browsefilter = "Clojure Source Files (*.clj)\t*.clj\n" .
 	                   \ "ClojureScript Source Files (*.cljs)\t*.cljs\n" .
 	                   \ "Java Source Files (*.java)\t*.java\n" .

runtime/ftplugin/context.vim

@@ -2,7 +2,7 @@
 " Language:           ConTeXt typesetting engine
 " Maintainer:         Nicola Vitacolonna <nvitacolonna@gmail.com>
 " Former Maintainers: Nikolai Weibull <now@bitwi.se>
-" Latest Revision:    2016 Oct 30
+" Latest Revision:    2021 Oct 15
 
 if exists("b:did_ftplugin")
   finish
@@ -17,7 +17,6 @@ if !exists('current_compiler')
 endif
 
 let b:undo_ftplugin = "setl com< cms< def< inc< sua< fo< ofu<"
-      \ . "| unlet! b:match_ignorecase b:match_words b:match_skip"
 
 setlocal comments=b:%D,b:%C,b:%M,:% commentstring=%\ %s formatoptions+=tjcroql2
 if get(b:, 'context_metapost', get(g:, 'context_metapost', 1))
@@ -35,11 +34,12 @@ let &l:include = '^\s*\\\%(input\|component\|product\|project\|environment\)'
 
 setlocal suffixesadd=.tex
 
-if exists("loaded_matchit")
+if exists("loaded_matchit") && !exists("b:match_words")
   let b:match_ignorecase = 0
   let b:match_skip = 'r:\\\@<!\%(\\\\\)*%'
   let b:match_words = '(:),\[:],{:},\\(:\\),\\\[:\\],' .
         \ '\\start\(\a\+\):\\stop\1'
+  let b:undo_ftplugin .= " | unlet! b:match_ignorecase b:match_words b:match_skip"
 endif
 
 let s:context_regex = {
@@ -57,19 +57,28 @@ function! s:move_around(count, what, flags, visual)
   call map(range(2, a:count), 'search(s:context_regex[a:what], a:flags)')
 endfunction
 
-" Move around macros.
-nnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:false) <CR>
-vnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:true)  <CR>
-nnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:false) <CR>
-vnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:true)  <CR>
-nnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:false) <CR>
-vnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:true)  <CR>
-nnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:false) <CR>
-vnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:true)  <CR>
-nnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:false) <CR>
-vnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:true)  <CR>
-nnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:false) <CR>
-vnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:true)  <CR>
+if !exists("no_plugin_maps") && !exists("no_context_maps")
+  " Move around macros.
+  nnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:false) <CR>
+  vnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:false) <CR>
+  vnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:true)  <CR>
+  nnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:false) <CR>
+  vnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:false) <CR>
+  vnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:true)  <CR>
+  nnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:false) <CR>
+  vnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:false) <CR>
+  vnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:true)  <CR>
+
+  let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> [[' | sil! exe 'vunmap <buffer> [['" .
+	\                " | sil! exe 'nunmap <buffer> ]]' | sil! exe 'vunmap <buffer> ]]'" .
+	\                " | sil! exe 'nunmap <buffer> []' | sil! exe 'vunmap <buffer> []'" .
+	\                " | sil! exe 'nunmap <buffer> ][' | sil! exe 'vunmap <buffer> ]['" .
+	\                " | sil! exe 'nunmap <buffer> [{' | sil! exe 'vunmap <buffer> [{'" .
+	\                " | sil! exe 'nunmap <buffer> ]}' | sil! exe 'vunmap <buffer> ]}'"
+end
 
 " Other useful mappings
 if get(g:, 'context_mappings', 1)
@@ -81,16 +90,22 @@ if get(g:, 'context_mappings', 1)
     call cursor(search(s:tp_regex, 'W') - 1, 1)
   endf
 
-  " Reflow paragraphs with commands like gqtp ("gq TeX paragraph")
-  onoremap <silent><buffer> tp :<c-u>call <sid>tp()<cr>
-  " Select TeX paragraph
-  vnoremap <silent><buffer> tp <esc>:<c-u>call <sid>tp()<cr>
+  if !exists("no_plugin_maps") && !exists("no_context_maps")
+    " Reflow paragraphs with commands like gqtp ("gq TeX paragraph")
+    onoremap <silent><buffer> tp :<c-u>call <sid>tp()<cr>
+    " Select TeX paragraph
+    vnoremap <silent><buffer> tp <esc>:<c-u>call <sid>tp()<cr>
 
-  " $...$ text object
-  onoremap <silent><buffer> i$ :<c-u>normal! T$vt$<cr>
-  onoremap <silent><buffer> a$ :<c-u>normal! F$vf$<cr>
-  vnoremap <buffer> i$ T$ot$
-  vnoremap <buffer> a$ F$of$
+    " $...$ text object
+    onoremap <silent><buffer> i$ :<c-u>normal! T$vt$<cr>
+    onoremap <silent><buffer> a$ :<c-u>normal! F$vf$<cr>
+    vnoremap <buffer> i$ T$ot$
+    vnoremap <buffer> a$ F$of$
+
+    let b:undo_ftplugin .= " | sil! exe 'ounmap <buffer> tp' | sil! exe 'vunmap <buffer> tp'" .
+	  \                " | sil! exe 'ounmap <buffer> i$' | sil! exe 'vunmap <buffer> i$'" .
+	  \                " | sil! exe 'ounmap <buffer> a$' | sil! exe 'vunmap <buffer> a$'"
+    endif
 endif
 
 " Commands for asynchronous typesetting

runtime/ftplugin/csh.vim

@@ -1,21 +1,23 @@
 " Vim filetype plugin file
-" Language:	csh
-" Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
-" Last Changed: 20 Jan 2009
-" URL:		http://dwsharp.users.sourceforge.net/vim/ftplugin
+" Language:		csh
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
+" Contributor:		Johannes Zellner <johannes@zellner.org>
+" Last Change:		2021 Oct 15
 
 if exists("b:did_ftplugin") | finish | endif
 let b:did_ftplugin = 1
 
-" Make sure the continuation lines below do not cause problems in
-" compatibility mode.
 let s:save_cpo = &cpo
 set cpo-=C
 
+setlocal comments=:#
 setlocal commentstring=#%s
 setlocal formatoptions-=t
 setlocal formatoptions+=crql
 
+let b:undo_ftplugin = "setlocal com< cms< fo<"
+
 " Csh:  thanks to Johannes Zellner
 " - Both foreach and end must appear alone on separate lines.
 " - The words else and endif must appear at the beginning of input lines;
@@ -23,26 +25,27 @@ setlocal formatoptions+=crql
 " - Each case label and the default label must appear at the start of a
 "   line.
 " - while and end must appear alone on their input lines.
-if exists("loaded_matchit")
-    let b:match_words =
-      \ '^\s*\<if\>.*(.*).*\<then\>:'.
-      \   '^\s*\<else\>\s\+\<if\>.*(.*).*\<then\>:^\s*\<else\>:'.
-      \   '^\s*\<endif\>,'.
-      \ '\%(^\s*\<foreach\>\s\+\S\+\|^s*\<while\>\).*(.*):'.
-      \   '\<break\>:\<continue\>:^\s*\<end\>,'.
-      \ '^\s*\<switch\>.*(.*):^\s*\<case\>\s\+:^\s*\<default\>:^\s*\<endsw\>'
+if exists("loaded_matchit") && !exists("b:match_words")
+  let s:line_start = '\%(^\s*\)\@<='
+  let b:match_words =
+	\ s:line_start .. 'if\s*(.*)\s*then\>:' ..
+	\   s:line_start .. 'else\s\+if\s*(.*)\s*then\>:' .. s:line_start .. 'else\>:' ..
+	\   s:line_start .. 'endif\>,' ..
+	\ s:line_start .. '\%(\<foreach\s\+\h\w*\|while\)\s*(:' ..
+	\   '\<break\>:\<continue\>:' ..
+	\   s:line_start .. 'end\>,' ..
+	\ s:line_start .. 'switch\s*(:' ..
+	\   s:line_start .. 'case\s\+:' .. s:line_start .. 'default\>:\<breaksw\>:' ..
+	\   s:line_start .. 'endsw\>'
+  unlet s:line_start
+  let b:undo_ftplugin ..= " | unlet b:match_words"
 endif
 
-" Change the :browse e filter to primarily show csh-related files.
-if has("gui_win32")
-    let  b:browsefilter="csh Scripts (*.csh)\t*.csh\n" .
-		\	"All Files (*.*)\t*.*\n"
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let  b:browsefilter="csh Scripts (*.csh)\t*.csh\n" ..
+	\	      "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet b:browsefilter"
 endif
 
-" Undo the stuff we changed.
-let b:undo_ftplugin = "setlocal commentstring< formatoptions<" .
-		\     " | unlet! b:match_words b:browsefilter"
-
-" Restore the saved compatibility options.
 let &cpo = s:save_cpo
 unlet s:save_cpo

runtime/ftplugin/dosini.vim

@@ -1,5 +1,5 @@
 " Vim filetype plugin file
-" Language:             Configuration File (ini file) for MSDOS/MS Windows
+" Language:             Configuration File (ini file) for MS-DOS/MS Windows
 " Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
 " Latest Revision:      2008-07-09
 

runtime/ftplugin/gprof.vim

@@ -1,6 +1,7 @@
-" Language:    gprof
-" Maintainer:  Dominique Pelle <dominique.pelle@gmail.com>
-" Last Change: 2021 Apr 08
+" Language:     gprof
+" Maintainer:   Dominique Pelle <dominique.pelle@gmail.com>
+" Contributors: Doug Kearns <dougkearns@gmail.com>
+" Last Change:  2021 Sep 19
 
 " When cursor is on one line of the gprof call graph,
 " calling this function jumps to this function in the call graph.
@@ -9,7 +10,7 @@ if exists("b:did_ftplugin")
 endif
 let b:did_ftplugin=1
 
-fun! <SID>GprofJumpToFunctionIndex()
+func! <SID>GprofJumpToFunctionIndex()
   let l:line = getline('.')
   if l:line =~ '[\d\+\]$'
     " We're in a line in the call graph.
@@ -22,11 +23,14 @@ fun! <SID>GprofJumpToFunctionIndex()
     call search('^\[\d\+\].*\d\s\+' .  escape(@", '[]*.') . '\>', 'sW')
     norm! zz
   endif
-endfun
+endfunc
 
-" Pressing <C-]> on a line in the gprof flat profile or in
-" the call graph, jumps to the corresponding function inside
-" the flat profile.
-map <buffer> <silent> <C-]> :call <SID>GprofJumpToFunctionIndex()<CR>
+if !exists("no_plugin_maps") && !exists("no_gprof_maps")
+  " Pressing <C-]> on a line in the gprof flat profile or in
+  " the call graph, jumps to the corresponding function inside
+  " the flat profile.
+  map <buffer> <silent> <C-]> :call <SID>GprofJumpToFunctionIndex()<CR>
+  let b:undo_ftplugin = "silent! unmap <buffer> <C-]>"
+endif
 
 " vim:sw=2 fdm=indent

runtime/ftplugin/julia.vim

@@ -0,0 +1,92 @@
+" Vim filetype plugin file
+" Language:	Julia
+" Maintainer:	Carlo Baldassi <carlobaldassi@gmail.com>
+" Homepage:	https://github.com/JuliaEditorSupport/julia-vim
+" Last Change:	2021 Aug 04
+" adapted from upstream 2021 Aug 4
+
+if exists("b:did_ftplugin")
+  finish
+endif
+let b:did_ftplugin = 1
+
+let s:save_cpo = &cpo
+set cpo-=C
+
+setlocal include=^\\s*\\%(reload\\\|include\\)\\>
+setlocal suffixesadd=.jl
+setlocal comments=:#
+setlocal commentstring=#\ %s
+setlocal cinoptions+=#1
+setlocal define=^\\s*macro\\>
+setlocal fo-=t fo+=croql
+
+let b:julia_vim_loaded = 1
+
+let b:undo_ftplugin = "setlocal include< suffixesadd< comments< commentstring<"
+      \ . " define< fo< shiftwidth< expandtab< indentexpr< indentkeys< cinoptions< completefunc<"
+      \ . " | unlet! b:julia_vim_loaded"
+
+" MatchIt plugin support
+if exists("loaded_matchit")
+  let b:match_ignorecase = 0
+
+  " note: begin_keywords must contain all blocks, in order
+  " for nested-structures-skipping to work properly
+  " note: 'mutable struct' and 'struct' are defined separately because
+  " using \? puts the cursor on 'struct' instead of 'mutable' for some reason
+  let b:julia_begin_keywords = '\%(\.\s*\|@\)\@<!\<\%(function\|macro\|begin\|mutable\s\+struct\|\%(mutable\s\+\)\@<!struct\|\%(abstract\|primitive\)\s\+type\|let\|do\|\%(bare\)\?module\|quote\|if\|for\|while\|try\)\>'
+  " note: the following regex not only recognizes macros, but also local/global keywords.
+  " the purpose is recognizing things like `@inline myfunction()`
+  " or `global myfunction(...)` etc, for matchit and block movement functionality
+  let s:macro_regex = '\%(@\%([#(]\@!\S\)\+\|\<\%(local\|global\)\)\s\+'
+  let s:nomacro = '\%(' . s:macro_regex . '\)\@<!'
+  let s:yesmacro = s:nomacro . '\%('. s:macro_regex . '\)\+'
+  let b:julia_begin_keywordsm = '\%(' . s:yesmacro . b:julia_begin_keywords . '\)\|'
+        \ . '\%(' . s:nomacro . b:julia_begin_keywords . '\)'
+  let b:julia_end_keywords = '\<end\>'
+
+  " note: this function relies heavily on the syntax file
+  function! JuliaGetMatchWords()
+    let [l,c] = [line('.'),col('.')]
+    let attr = synIDattr(synID(l, c, 1),"name")
+    let c1 = c
+    while attr == 'juliaMacro' || expand('<cword>') =~# '\<\%(global\|local\)\>'
+      normal! W
+      if line('.') > l || col('.') == c1
+        call cursor(l, c)
+        return ''
+      endif
+      let attr = synIDattr(synID(l, col('.'), 1),"name")
+      let c1 = col('.')
+    endwhile
+    call cursor(l, c)
+    if attr == 'juliaConditional'
+      return b:julia_begin_keywordsm . ':\<\%(elseif\|else\)\>:' . b:julia_end_keywords
+    elseif attr =~# '\<\%(juliaRepeat\|juliaRepKeyword\)\>'
+      return b:julia_begin_keywordsm . ':\<\%(break\|continue\)\>:' . b:julia_end_keywords
+    elseif attr == 'juliaBlKeyword'
+      return b:julia_begin_keywordsm . ':' . b:julia_end_keywords
+    elseif attr == 'juliaException'
+      return b:julia_begin_keywordsm . ':\<\%(catch\|finally\)\>:' . b:julia_end_keywords
+    endif
+    return '\<\>:\<\>'
+  endfunction
+
+  let b:match_words = 'JuliaGetMatchWords()'
+
+  " we need to skip everything within comments, strings and
+  " the 'begin' and 'end' keywords when they are used as a range rather than as
+  " the delimiter of a block
+  let b:match_skip = 'synIDattr(synID(line("."),col("."),0),"name") =~# '
+        \ . '"\\<julia\\%(Comprehension\\%(For\\|If\\)\\|RangeKeyword\\|Comment\\%([LM]\\|Delim\\)\\|\\%([bs]\\|Shell\\|Printf\\|Doc\\)\\?String\\|StringPrefixed\\|DocStringM\\(Raw\\)\\?\\|RegEx\\|SymbolS\\?\\|Dotted\\)\\>"'
+
+  let b:undo_ftplugin = b:undo_ftplugin
+        \ . " | unlet! b:match_words b:match_skip b:match_ignorecase"
+        \ . " | unlet! b:julia_begin_keywords b:julia_end_keywords"
+        \ . " | delfunction JuliaGetMatchWords"
+
+endif
+
+let &cpo = s:save_cpo
+unlet s:save_cpo

runtime/ftplugin/mail.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Mail
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2012 Nov 20
+" Last Change:	2021 Oct 23
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -26,6 +26,14 @@ setlocal fo+=tcql
 " Add n:> to 'comments, in case it was removed elsewhere
 setlocal comments+=n:>
 
+" .eml files are universally formatted with DOS line-endings, per RFC5322.
+" If the file was not DOS the it will be marked as changed, which is probably
+" a good thing.
+if expand('%:e') ==? 'eml'
+  let b:undo_ftplugin ..= " fileformat=" .. &fileformat
+  setlocal fileformat=dos
+endif
+
 " Add mappings, unless the user doesn't want this.
 if !exists("no_plugin_maps") && !exists("no_mail_maps")
   " Quote text by inserting "> "

runtime/ftplugin/man.vim

@@ -2,7 +2,7 @@
 " Language:	man
 " Maintainer:	Jason Franklin <vim@justemail.net>
 " Maintainer:	SungHyun Nam <goweol@gmail.com>
-" Last Change: 	2020 Oct 09
+" Last Change: 	2021 Sep 26
 
 " To make the ":Man" command available before editing a manual page, source
 " this script from your startup vimrc file.