patch 8.1.0616: NSIS installer is outdated

Problem:    NSIS installer is outdated.
Solution:   Use modern syntax, MUI2 and make it work better. Add translations.
            (Ken Takata, closes #3501)

.travis.yml

@@ -10,23 +10,23 @@ compiler:
   - gcc
 
 env:
-  - BUILD=yes TEST=scripttests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
-  - BUILD=no TEST=unittests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=yes
-  - BUILD=yes TEST=test COVERAGE=no FEATURES=normal CONFOPT= SHADOWOPT="-C src/shadow" SRCDIR=./src/shadow CHECK_AUTOCONF=no
-  - BUILD=yes TEST=test COVERAGE=no FEATURES=small CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
   - BUILD=yes TEST=test COVERAGE=no FEATURES=tiny  CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-    # Mac OSX build
-  - BUILD=yes TEST=test COVERAGE=no FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
     # ASAN build
   - BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
     FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan" LSAN_OPTIONS="suppressions=$TRAVIS_BUILD_DIR/src/testdir/lsan-suppress.txt"
     "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
+  - BUILD=yes TEST="scripttests test_libvterm" COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
+  - BUILD=no TEST=unittests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=yes
+  - BUILD=yes TEST=test COVERAGE=no FEATURES=normal CONFOPT= SHADOWOPT="-C src/shadow" SRCDIR=./src/shadow CHECK_AUTOCONF=no
+  - BUILD=yes TEST=test COVERAGE=no FEATURES=small CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+    # Mac OSX build
+  - BUILD=yes TEST=test COVERAGE=no FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
 
 sudo: false
 
-# instead of a 2*2*8 matrix (2*os + 2*compiler + 8*env),
+# instead of a 2*2*7 matrix (2*os + 2*compiler + 7*env),
 # exclude some builds on mac os x and linux
 # linux: 2*compiler + 5*env + mac: 2*compiler + 2*env
 matrix:
@@ -38,7 +38,7 @@ matrix:
     - os: osx
       env: BUILD=yes TEST=test COVERAGE=no FEATURES=small CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
     - os: osx
-      env: BUILD=yes TEST=scripttests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+      env: BUILD=yes TEST="scripttests test_libvterm" COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
             "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
     - os: osx
       env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
@@ -109,7 +109,7 @@ script:
   - if [ -n "$err" ]; then exit 1; fi
 
 after_success:
-  - if [ "$COVERAGE" = "yes" ]; then ~/.local/bin/coveralls -b ${SRCDIR} -x .xs -e ${SRCDIR}/xxd -e ${SRCDIR}/if_perl.c --encodings utf-8 latin-1 EUC-KR; fi
+  - if [ "$COVERAGE" = "yes" ]; then ~/.local/bin/coveralls -b ${SRCDIR} -x .xs -e ${SRCDIR}/if_perl.c -e ${SRCDIR}/xxd -e ${SRCDIR}/libvterm --encodings utf-8 latin-1 EUC-KR; fi
   - if [ "$COVERAGE" = "yes" ]; then  cd ${SRCDIR} && bash <(curl -s https://codecov.io/bash) ; fi
 
 # vim:set sts=2 sw=2 tw=0 et:

CONTRIBUTING.md

@@ -57,11 +57,18 @@ If the maintainer does not respond, contact the vim-dev maillist.
 # Translations
 
 Translating messages and runtime files is very much appreciated!  These things can be translated:
-*   Messages in Vim, see src/po/README.txt
-*   Menus, see runtime/lang/README.txt
-*   Vim tutor, see runtime/tutor/README.txt
-*   Manual pages, see runtime/doc/*.1 for examples
-*   Desktop icon, see runtime/vim.desktop and runtime/gvim.desktop
+*   Messages in Vim, see [src/po/README.txt][1]
+*   Menus, see [runtime/lang/README.txt][2]
+*   Vim tutor, see [runtime/tutor/README.txt][3]
+*   Manual pages, see [runtime/doc/\*.1][4] for examples
+*   Desktop icon, see [runtime/vim.desktop][5] and [runtime/gvim.desktop][6]
 
 The help files can be translated and made available separately.
 See https://www.vim.org/translations.php for examples.
+
+[1]: https://github.com/vim/vim/blob/master/src/po/README.txt
+[2]: https://github.com/vim/vim/blob/master/runtime/lang/README.txt
+[3]: https://github.com/vim/vim/blob/master/runtime/tutor/README.txt
+[4]: https://github.com/vim/vim/blob/master/runtime/doc/vim.1
+[5]: https://github.com/vim/vim/blob/master/runtime/vim.desktop
+[6]: https://github.com/vim/vim/blob/master/runtime/gvim.desktop

Filelist

@@ -1,5 +1,5 @@
 # List of distributed Vim files.
-# Used by Makefile and upload.aap.
+# Used by Makefile.
 
 # source files for all source archives
 SRC_ALL =	\
@@ -91,6 +91,7 @@ SRC_ALL =	\
 		src/terminal.c \
 		src/term.h \
 		src/termlib.c \
+		src/textprop.c \
 		src/ui.c \
 		src/undo.c \
 		src/userfunc.c \
@@ -101,9 +102,7 @@ SRC_ALL =	\
 		src/window.c \
 		src/tee/tee.c \
 		src/xxd/xxd.c \
-		src/main.aap \
 		src/testdir/gen_opt_test.vim \
-		src/testdir/main.aap \
 		src/testdir/README.txt \
 		src/testdir/Make_all.mak \
 		src/testdir/*.in \
@@ -143,6 +142,7 @@ SRC_ALL =	\
 		src/testdir/if_ver*.vim \
 		src/testdir/color_ramp.vim \
 		src/proto.h \
+		src/protodef.h \
 		src/proto/arabic.pro \
 		src/proto/beval.pro \
 		src/proto/blowfish.pro \
@@ -199,6 +199,7 @@ SRC_ALL =	\
 		src/proto/term.pro \
 		src/proto/terminal.pro \
 		src/proto/termlib.pro \
+		src/proto/textprop.pro \
 		src/proto/ui.pro \
 		src/proto/undo.pro \
 		src/proto/userfunc.pro \
@@ -229,7 +230,7 @@ SRC_ALL =	\
 		src/libvterm/src/parser.c \
 		src/libvterm/src/pen.c \
 		src/libvterm/src/rect.h \
-		src/libvterm/src/screen.c \
+		src/libvterm/src/termscreen.c \
 		src/libvterm/src/state.c \
 		src/libvterm/src/unicode.c \
 		src/libvterm/src/utf8.h \
@@ -275,6 +276,22 @@ SRC_ALL =	\
 		src/libvterm/t/92lp1640917.test \
 		src/libvterm/t/harness.c \
 		src/libvterm/t/run-test.pl \
+		src/xdiff/COPYING \
+		src/xdiff/README.txt \
+		src/xdiff/xdiff.h \
+		src/xdiff/xdiffi.c \
+		src/xdiff/xdiffi.h \
+		src/xdiff/xemit.c \
+		src/xdiff/xemit.h \
+		src/xdiff/xhistogram.c \
+		src/xdiff/xinclude.h \
+		src/xdiff/xmacros.h \
+		src/xdiff/xpatience.c \
+		src/xdiff/xprepare.c \
+		src/xdiff/xprepare.h \
+		src/xdiff/xtypes.h \
+		src/xdiff/xutils.c \
+		src/xdiff/xutils.h \
 
 
 # source files for Unix only
@@ -291,7 +308,6 @@ SRC_UNIX =	\
 		src/INSTALLx.txt \
 		src/Makefile \
 		src/auto/configure \
-		src/config.aap.in \
 		src/config.h.in \
 		src/config.mk.dist \
 		src/config.mk.in \
@@ -461,6 +477,7 @@ SRC_DOS =	\
 		nsis/gvim_version.nsh \
 		nsis/vimrc.ini \
 		nsis/README.txt \
+		nsis/lang/*.nsi \
 		uninstal.txt \
 		src/VisVim/Commands.cpp \
 		src/VisVim/Commands.h \
@@ -501,6 +518,7 @@ SRC_DOS_BIN =	\
 		src/xpm/x86/lib-vc14/libXpm.lib \
 		nsis/icons/*.bmp \
 		nsis/icons/*.ico \
+		nsis/icons/*.svg \
 
 # source files for Amiga, DOS, etc. (also in the extra archive)
 SRC_AMI_DOS =	\
@@ -612,7 +630,6 @@ RT_ALL =	\
 		runtime/macros/matchit.vim \
 		runtime/macros/maze/README.txt \
 		runtime/macros/maze/[mM]akefile \
-		runtime/macros/maze/main.aap \
 		runtime/macros/maze/maze.c \
 		runtime/macros/maze/maze_5.78 \
 		runtime/macros/maze/maze_mac \
@@ -640,6 +657,7 @@ RT_ALL =	\
 		runtime/tutor/tutor \
 		runtime/tutor/tutor.vim \
 		runtime/vimrc_example.vim \
+		runtime/pack/dist/opt/cfilter/plugin/cfilter.vim \
 		runtime/pack/dist/opt/dvorak/plugin/dvorak.vim \
 		runtime/pack/dist/opt/dvorak/dvorak/enable.vim \
 		runtime/pack/dist/opt/dvorak/dvorak/disable.vim \
@@ -677,6 +695,11 @@ RT_SCRIPTS =	\
 		runtime/compiler/README.txt \
 		runtime/indent/*.vim \
 		runtime/indent/README.txt \
+		runtime/indent/Makefile \
+		runtime/indent/testdir/README.txt \
+		runtime/indent/testdir/*.vim \
+		runtime/indent/testdir/*.in \
+		runtime/indent/testdir/*.ok \
 		runtime/ftplugin/*.vim \
 		runtime/ftplugin/logtalk.dict \
 		runtime/ftplugin/README.txt \

Makefile

@@ -32,14 +32,26 @@ first:
 
 # Some make programs use the last target for the $@ default; put the other
 # targets separately to always let $@ expand to "first" by default.
-all install uninstall tools config configure reconfig proto depend lint tags types test scripttests unittests testclean clean distclean:
+all install uninstall tools config configure reconfig proto depend lint tags types test scripttests test_libvterm unittests testclean clean distclean:
 	@if test ! -f src/auto/config.mk; then \
 		cp src/config.mk.dist src/auto/config.mk; \
 	fi
 	@echo "Starting make in the src directory."
 	@echo "If there are problems, cd to the src directory and run make there"
 	cd src && $(MAKE) $@
+	@# When the target is "test" also run the indent tests.
+	@if test "$@" = "test"; then \
+		$(MAKE) indenttest; \
+	fi
 
+# Executable used for running the indent tests.
+VIM_FOR_INDENTTEST = ../../src/vim
+
+indenttest:
+	cd runtime/indent && \
+		$(MAKE) clean VIM="$(VIM_FOR_INDENTTEST)" && \
+		$(MAKE) test VIM="$(VIM_FOR_INDENTTEST)"
+		
 
 #########################################################################
 # 2. Creating the various distribution files.

README.md

@@ -2,9 +2,10 @@
 
 [![Build Status](https://travis-ci.org/vim/vim.svg?branch=master)](https://travis-ci.org/vim/vim)
 [![Coverage Status](https://codecov.io/gh/vim/vim/coverage.svg?branch=master)](https://codecov.io/gh/vim/vim?branch=master)
-[![Coverage Status](https://coveralls.io/repos/vim/vim/badge.svg?branch=master&service=github)](https://coveralls.io/github/vim/vim?branch=master)
+[![Coverage Status](https://coveralls.io/repos/github/vim/vim/badge.svg?branch=master)](https://coveralls.io/github/vim/vim?branch=master)
 [![Appveyor Build status](https://ci.appveyor.com/api/projects/status/o2qht2kjm02sgghk?svg=true)](https://ci.appveyor.com/project/chrisbra/vim)
 [![Coverity Scan](https://scan.coverity.com/projects/241/badge.svg)](https://scan.coverity.com/projects/vim)
+[![Language Grade: C/C++](https://img.shields.io/lgtm/grade/cpp/g/vim/vim.svg?logo=lgtm&logoWidth=18)](https://lgtm.com/projects/g/vim/vim/context:cpp)
 [![Debian CI](https://badges.debian.net/badges/debian/testing/vim/version.svg)](https://buildd.debian.org/vim)
 
 

READMEdir/README_os390.txt

@@ -1,4 +1,4 @@
-README_zOS.txt for version 8.1 of Vim: Vi IMproved.
+README_os390.txt for version 8.1 of Vim: Vi IMproved.
 
 This readme explains how to build Vim on z/OS.  Formerly called OS/390.
 See "README.txt" for general information about Vim.

nsis/README.txt

@@ -15,6 +15,7 @@ To build the installable .exe:
 	vimrun.exe,
 	install.exe,
 	uninstal.exe,
+	tee/tee.exe,
 	xxd/xxd.exe,
 
     Then execute tools/rename.bat to rename the executables. (mv command is
@@ -29,14 +30,15 @@ To build the installable .exe:
 4.  Go to the VisVim directory and build VisVim.dll (or get it from a binary
     archive).
 
-5.  Go to the OleVim directory and build OpenWithVim.exe and SendToVim.exe (or
-    get them from a binary archive).
-
-6.  Get a "diff.exe" program and put it in the "../.." directory (above the
-    "vim80" directory, it's the same for all Vim versions).
+5.  Get a "diff.exe" program.  If you skip this the built-in diff will always
+    be used (which is fine for most users).  If you do have your own
+    "diff.exe" put it in the "../.." directory (above the "vim81" directory,
+    it's the same for all Vim versions).
     You can find one in previous Vim versions or in this archive:
 		http://www.mossbayeng.com/~ron/vim/diffutils.tar.gz
-    Also put winpty32.dll and winpty-agent.exe there.
+
+6   Also put winpty32.dll and winpty-agent.exe in "../.." (above the "vim81"
+    directory).  This is required for the terminal window.
 
 7.  Do "make uganda.nsis.txt" in runtime/doc.  This requires sed, you may have
     to do this on Unix.  Make sure the file is in DOS file format!

nsis/icons/header.svg

@@ -0,0 +1,265 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="300"
+   height="114"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.47 r22583"
+   sodipodi:docname="header.svg"
+   inkscape:export-filename="header.png"
+   inkscape:export-xdpi="90"
+   inkscape:export-ydpi="90">
+  <defs
+     id="defs4">
+    <filter
+       id="filter2840"
+       inkscape:label="Drop shadow"
+       width="1.5"
+       height="1.5"
+       x="-.25"
+       y="-.25">
+      <feGaussianBlur
+         id="feGaussianBlur2842"
+         in="SourceAlpha"
+         stdDeviation="3.000000"
+         result="blur" />
+      <feColorMatrix
+         id="feColorMatrix2844"
+         result="bluralpha"
+         type="matrix"
+         values="1 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0.600000 0 " />
+      <feOffset
+         id="feOffset2846"
+         in="bluralpha"
+         dx="-5.000000"
+         dy="5.000000"
+         result="offsetBlur" />
+      <feMerge
+         id="feMerge2848">
+        <feMergeNode
+           id="feMergeNode2850"
+           in="offsetBlur" />
+        <feMergeNode
+           id="feMergeNode2852"
+           in="SourceGraphic" />
+      </feMerge>
+    </filter>
+    <filter
+       id="filter2910"
+       inkscape:label="Drop shadow"
+       width="1.5"
+       height="1.5"
+       x="-.25"
+       y="-.25">
+      <feGaussianBlur
+         id="feGaussianBlur2912"
+         in="SourceAlpha"
+         stdDeviation="2.500000"
+         result="blur" />
+      <feColorMatrix
+         id="feColorMatrix2914"
+         result="bluralpha"
+         type="matrix"
+         values="1 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0.600000 0 " />
+      <feOffset
+         id="feOffset2916"
+         in="bluralpha"
+         dx="-3.000000"
+         dy="3.000000"
+         result="offsetBlur" />
+      <feMerge
+         id="feMerge2918">
+        <feMergeNode
+           id="feMergeNode2920"
+           in="offsetBlur" />
+        <feMergeNode
+           id="feMergeNode2922"
+           in="SourceGraphic" />
+      </feMerge>
+    </filter>
+  </defs>
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="1"
+     inkscape:pageshadow="2"
+     inkscape:zoom="2.1369427"
+     inkscape:cx="130.27686"
+     inkscape:cy="77.09629"
+     inkscape:document-units="px"
+     inkscape:current-layer="header"
+     showgrid="false"
+     inkscape:window-width="1280"
+     inkscape:window-height="942"
+     inkscape:window-x="0"
+     inkscape:window-y="27"
+     inkscape:window-maximized="1"
+     inkscape:snap-global="true"
+     inkscape:showpageshadow="false" />
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Layer 1"
+     inkscape:groupmode="layer"
+     id="header"
+     transform="translate(0,-938.36218)">
+    <text
+       xml:space="preserve"
+       style="font-size:40px;font-style:normal;font-weight:normal;fill:#000000;fill-opacity:1;stroke:none;font-family:Bitstream Vera Sans"
+       id="text3026"
+       x="4.0525044"
+       y="-8.7699928">The editor</text>
+    <text
+       xml:space="preserve"
+       style="font-size:40px;font-style:normal;font-weight:normal;line-height:100%;fill:#000000;fill-opacity:1;stroke:none;font-family:Bitstream Vera Sans;filter:url(#filter2910)"
+       x="178.45901"
+       y="988.47156"
+       id="text3198"
+       sodipodi:linespacing="100%"><tspan
+         sodipodi:role="line"
+         id="tspan3200"
+         x="178.45901"
+         y="988.47156"
+         style="font-size:36px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:100%;writing-mode:lr-tb;text-anchor:middle;font-family:Courier New;-inkscape-font-specification:Courier New Bold">The</tspan><tspan
+         sodipodi:role="line"
+         x="178.45901"
+         y="1024.4716"
+         id="tspan3202"
+         style="font-size:36px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:100%;writing-mode:lr-tb;text-anchor:middle;font-family:Courier New;-inkscape-font-specification:Courier New Bold">editor</tspan></text>
+    <g
+       id="g2916"
+       style="filter:url(#filter2840)">
+      <path
+         inkscape:connector-curvature="0"
+         id="path2999"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="M 107.53604,994.85892 57.991535,946.32092 9.4535173,995.84025 57.991535,1044.4034 107.53604,994.85892" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3003"
+         style="fill:#006b05;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 102.57907,994.85892 2.96915,0 -47.556685,47.55668 0,-2.9691 44.587535,-44.58758" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3007"
+         style="fill:#007d17;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 11.441335,995.84025 2.969148,0 43.581052,43.60625 0,2.9691 -46.5502,-46.57535" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3011"
+         style="fill:#66ff99;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 57.991535,951.25272 0,-2.94398 -46.5502,47.53151 2.969148,0 43.581052,-44.58753" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3015"
+         style="fill:#45ff02;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 57.991535,948.30873 0,2.94399 44.587535,43.6062 2.96915,0 -47.556685,-46.55019" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3019"
+         style="fill:#009933;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 57.991535,1039.4465 44.587535,-44.58758 -44.587535,-43.6062 -43.581052,44.58753 43.581052,43.60625" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3023"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 67.25125,961.16664 2.969146,2.99431 0,0 -20.482085,20.78405 0,-20.78405 1.987817,0 2.969148,-2.99431 0,-7.90094 -2.969148,-2.99431 -33.012896,0 -2.969149,2.99431 0,7.90094 2.969149,2.99431 2.314928,0 0,67.35935 3.623367,2.9692 10.241043,0 70.98276,-73.32286 0,-7.90094 -2.96915,-2.99431 -32.358674,0 -3.296256,2.99431 0,7.90094" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3027"
+         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 19.694561,962.17314 -1.987821,-1.98782 0,-5.9383 1.987821,-1.98782 31.05024,-0.0252 1.962656,2.01298 -1.962656,0.95617 -1.00649,-0.95617 -30.04375,4.9318 0,2.99432" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3031"
+         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 25.632856,1032.5017 -2.314928,-1.9878 0,-68.36592 2.314928,-1.96266 0,72.31638" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3035"
+         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 75.177364,962.17314 1.987819,-1.98782 0,3.97563 -33.038059,33.66712 3.64853,-7.9261 27.40171,-27.72883" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3039"
+         style="fill:#7f7f7f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 26.312236,959.20399 -0.67938,0.98133 -2.314928,1.98782 -3.623367,0 0,-3.97563 6.617675,1.00648" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3043"
+         style="fill:#7f7f7f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 47.775654,962.17314 0,27.72883 -3.64853,7.90094 0,-37.64275 5.611187,0 1.00649,-0.98133 -1.00649,-4.93181 2.969146,0 0,5.9383 -1.962656,1.98782 -2.969147,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3047"
+         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 71.201725,962.17314 -1.962656,-1.98782 0,-5.9383 2.289766,-1.98782 30.068915,0 2.31493,1.98782 -3.32142,2.96915 -29.389535,1.96265 0,2.99432" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3051"
+         style="fill:#7f7f7f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 103.91268,960.18532 -69.699491,72.31638 -8.580333,0 0,-2.9692 6.290568,0 69.674326,-71.33499 -1.00649,-3.95049 3.32142,0 0,5.9383" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3055"
+         style="fill:#7f7f7f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 77.819404,959.20399 -0.679382,0.98133 -1.962658,1.98782 -3.975639,0 0,-3.97563 6.617679,1.00648" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3059"
+         style="fill:#cccccc;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 44.127124,997.80291 0,-37.64275 5.611187,0 1.00649,-0.98134 0,-3.97563 -1.00649,-0.98133 -29.062421,0 -0.981329,0.98133 0,3.97563 0.981329,0.98134 4.956966,0 0,69.37234 1.283276,0.9814 5.661511,0 69.347217,-72.31639 0,-2.84335 -1.00649,-1.1323 -28.710153,0 -1.006492,0.98133 0,4.0008 1.006492,0.98133 4.956966,0 0,3.97563 -33.038059,33.64196" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3063"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 62.143307,997.85323 2.31493,-1.98781 5.938295,0 1.660709,1.98781 -1.987817,5.93827 -2.289767,1.9879 -5.938295,0 -1.685872,-1.9879 1.987817,-5.93827" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3067"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 64.131127,1030.539 5.963458,-17.8149 -1.987818,0 1.987818,-5.9634 8.882281,0 1.987818,1.9878 1.333602,0 1.962657,-1.9878 6.617676,0 1.98782,1.9878 1.308439,0 1.987818,-1.9878 7.246734,0 2.64204,3.9756 -4.32791,14.0909 1.96265,0 -1.91233,5.7118 -11.901751,0 4.655019,-13.8644 -2.969147,0 -2.742688,8.1023 1.962658,0 -1.862008,5.7621 -11.901753,0 4.629856,-13.8644 -2.969146,0 -2.767852,8.1526 1.987821,0 -1.862008,5.7118 -11.901754,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3071"
+         style="fill:#cccccc;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 102.50359,1008.7485 1.53489,2.1891 -4.881475,15.6509 1.962655,0 -0.65422,1.9627 -7.92611,0 4.629858,-13.8644 -6.944788,0 -3.950475,11.9017 1.962657,0 -0.654219,1.9627 -7.926114,0 4.629855,-13.8644 -6.944785,0 -3.950476,11.9017 1.987818,0 -0.67938,1.9627 -7.926116,0 5.963458,-17.8149 -1.987818,0 0.654217,-1.9878 7.271898,0 1.987818,1.9878 1.962657,0 1.987819,-1.9878 5.938295,0 1.987821,1.9878 1.987818,0 1.987821,-1.9878 5.988621,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3075"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 69.088095,1006.7607 -6.064107,18.0413 2.063305,0 -1.962657,5.737 -11.876589,0 5.938295,-17.8149 -1.98782,0 13.889573,-5.9634 z m -13.889573,5.9634 1.98782,-5.9634 11.901753,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3079"
+         style="fill:#cccccc;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 61.816199,1028.5512 0.654219,-1.9627 -1.987819,0 5.963458,-17.84 -8.253225,0 -0.67938,1.9878 2.314928,0 -5.938297,17.8149 7.926116,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3083"
+         style="fill:#cccccc;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.07548681;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+         d="m 68.408713,1002.8102 1.333602,-3.97563 -0.65422,-0.98134 -3.975639,0 -1.308438,0.98134 -1.333601,3.97563 0.679382,0.9813 3.975639,0 1.283275,-0.9813" />
+    </g>
+  </g>
+</svg>

nsis/icons/welcome.svg

@@ -0,0 +1,268 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:xlink="http://www.w3.org/1999/xlink"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="328"
+   height="628"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.47 r22583"
+   sodipodi:docname="welcome.svg"
+   inkscape:export-filename="welcome.png"
+   inkscape:export-xdpi="90"
+   inkscape:export-ydpi="90">
+  <defs
+     id="defs4">
+    <filter
+       id="filter3356"
+       inkscape:label="Drop shadow"
+       width="1.5"
+       height="1.5"
+       x="-.25"
+       y="-.25">
+      <feGaussianBlur
+         id="feGaussianBlur3358"
+         in="SourceAlpha"
+         stdDeviation="5.000000"
+         result="blur" />
+      <feColorMatrix
+         id="feColorMatrix3360"
+         result="bluralpha"
+         type="matrix"
+         values="1 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0.600000 0 " />
+      <feOffset
+         id="feOffset3362"
+         in="bluralpha"
+         dx="-10.000000"
+         dy="10.000000"
+         result="offsetBlur" />
+      <feMerge
+         id="feMerge3364">
+        <feMergeNode
+           id="feMergeNode3366"
+           in="offsetBlur" />
+        <feMergeNode
+           id="feMergeNode3368"
+           in="SourceGraphic" />
+      </feMerge>
+    </filter>
+    <filter
+       id="filter3496"
+       inkscape:label="Drop shadow"
+       width="1.5"
+       height="1.5"
+       x="-.25"
+       y="-.25">
+      <feGaussianBlur
+         id="feGaussianBlur3498"
+         in="SourceAlpha"
+         stdDeviation="3.000000"
+         result="blur" />
+      <feColorMatrix
+         id="feColorMatrix3500"
+         result="bluralpha"
+         type="matrix"
+         values="1 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0.600000 0 " />
+      <feOffset
+         id="feOffset3502"
+         in="bluralpha"
+         dx="-5.000000"
+         dy="5.000000"
+         result="offsetBlur" />
+      <feMerge
+         id="feMerge3504">
+        <feMergeNode
+           id="feMergeNode3506"
+           in="offsetBlur" />
+        <feMergeNode
+           id="feMergeNode3508"
+           in="SourceGraphic" />
+      </feMerge>
+    </filter>
+  </defs>
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="1"
+     inkscape:pageshadow="2"
+     inkscape:zoom="1.0716561"
+     inkscape:cx="122.81449"
+     inkscape:cy="381.22777"
+     inkscape:document-units="px"
+     inkscape:current-layer="layer1"
+     showgrid="false"
+     inkscape:window-width="1280"
+     inkscape:window-height="942"
+     inkscape:window-x="0"
+     inkscape:window-y="27"
+     inkscape:window-maximized="1"
+     inkscape:snap-global="true"
+     inkscape:showpageshadow="false" />
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Layer 1"
+     inkscape:groupmode="layer"
+     id="layer1"
+     transform="translate(0,-424.36218)">
+    <rect
+       style="fill:#eeffcc;fill-opacity:1;stroke:#007f00;stroke-width:2.0138948;stroke-miterlimit:2.6099999;stroke-opacity:1;stroke-dasharray:none"
+       id="rect3510"
+       width="327.98608"
+       height="635.98608"
+       x="-0.99305254"
+       y="420.36914" />
+    <path
+       sodipodi:type="arc"
+       style="fill:#ffffff;fill-opacity:0;stroke:none"
+       id="path3795"
+       sodipodi:cx="92.889717"
+       sodipodi:cy="94.761551"
+       sodipodi:rx="83.062592"
+       sodipodi:ry="84.466469"
+       d="m 175.95231,94.761551 c 0,46.649539 -37.18839,84.466469 -83.062593,84.466469 -45.874202,0 -83.0625915,-37.81693 -83.0625915,-84.466469 0,-46.649543 37.1883895,-84.466469 83.0625915,-84.466469 45.874203,0 83.062593,37.816926 83.062593,84.466469 z"
+       transform="matrix(0,-2.3099964,-2.3548838,0,387.15244,952.93709)" />
+    <text
+       xml:space="preserve"
+       style="font-size:40px;font-style:normal;font-weight:normal;fill:#000000;fill-opacity:1;stroke:none;font-family:Bitstream Vera Sans;filter:url(#filter3496)"
+       id="text3026"><textPath
+         xlink:href="#path3795"
+         startOffset="50%"
+         id="textPath3036"
+         style="font-size:58;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;text-anchor:middle;font-family:Courier New;-inkscape-font-specification:Courier New Bold;">The editor</textPath></text>
+    <g
+       id="g2968"
+       style="filter:url(#filter3356)">
+      <path
+         inkscape:connector-curvature="0"
+         id="path2999"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="M 299.80052,736.9686 162.60646,602.56167 28.199478,739.68603 162.60646,874.16269 299.80052,736.9686" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3003"
+         style="fill:#006b05;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 286.07415,736.9686 8.22189,0 -131.68958,131.68962 0,-8.2219 123.46769,-123.46772" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3007"
+         style="fill:#007d17;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 33.703958,739.68603 8.221891,0 120.680611,120.75029 0,8.2219 L 33.703958,739.68603" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3011"
+         style="fill:#66ff99;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 162.60646,616.21837 0,-8.15223 -128.902502,131.61989 8.221891,0 120.680611,-123.46766" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3015"
+         style="fill:#45ff02;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 162.60646,608.06614 0,8.15223 123.46769,120.75023 8.22189,0 -131.68958,-128.90246" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3019"
+         style="fill:#009933;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="M 162.60646,860.43632 286.07415,736.9686 162.60646,616.21837 41.925849,739.68603 162.60646,860.43632" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3023"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 188.24761,643.67106 8.22188,8.29158 0,0 -56.71709,57.55326 0,-57.55326 5.50448,0 8.22189,-8.29158 0,-21.87855 -8.22189,-8.29157 -91.416257,0 -8.221894,8.29157 0,21.87855 8.221894,8.29158 6.410285,0 0,186.52539 10.033492,8.22191 28.358547,0 196.558893,-203.03888 0,-21.87855 -8.22189,-8.29157 -89.60466,0 -9.12768,8.29157 0,21.87855" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3027"
+         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 56.558028,646.45817 -5.504489,-5.50448 0,-16.4438 5.504489,-5.50448 85.981452,-0.0697 5.4348,5.57416 -5.4348,2.64775 -2.78708,-2.64775 -83.194372,13.6567 0,8.29158" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3031"
+         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 73.001805,841.20547 -6.410285,-5.50448 0,-189.3125 6.410285,-5.4348 0,200.25178" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3035"
+         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 210.19587,646.45817 5.50448,-5.50448 0,11.00895 -91.48593,93.22786 10.10317,-21.94822 75.87828,-76.78411" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3039"
+         style="fill:#7f7f7f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 74.883082,638.23626 -1.881277,2.71743 -6.410285,5.50448 -10.033492,0 0,-11.00895 18.325054,2.78704" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3043"
+         style="fill:#7f7f7f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 134.31759,646.45817 0,76.78411 -10.10317,21.87855 0,-104.23681 15.53798,0 2.78708,-2.71743 -2.78708,-13.6567 8.22188,0 0,16.4438 -5.4348,5.50448 -8.22189,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3047"
+         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 199.1869,646.45817 -5.43481,-5.50448 0,-16.4438 6.34061,-5.50448 83.26404,0 6.41029,5.50448 -9.19736,8.2219 -81.38277,5.4348 0,8.29158" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3051"
+         style="fill:#7f7f7f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 289.76703,640.95369 -193.005361,200.25177 -23.759864,0 0,-8.2219 17.419257,0 192.935678,-197.53434 -2.78707,-10.93933 9.19736,0 0,16.4438" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3055"
+         style="fill:#7f7f7f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 217.51196,638.23626 -1.88128,2.71743 -5.43481,5.50448 -11.00897,0 0,-11.00895 18.32506,2.78704" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3059"
+         style="fill:#cccccc;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 124.21442,745.12082 0,-104.23681 15.53798,0 2.78708,-2.71742 0,-11.00895 -2.78708,-2.71743 -80.476968,0 -2.717404,2.71743 0,11.00895 2.717404,2.71742 13.726373,0 0,192.09955 3.553528,2.71743 15.677333,0 192.029884,-200.25177 0,-7.87353 -2.78708,-3.13548 -79.50149,0 -2.78708,2.71743 0,11.07862 2.78708,2.71743 13.72637,0 0,11.00895 -91.48593,93.15818" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3063"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 174.10317,745.26018 6.41029,-5.50448 16.44377,0 4.59868,5.50448 -5.50447,16.4438 -6.34062,5.50448 -16.44377,0 -4.66836,-5.50448 5.50448,-16.4438" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3067"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 179.60765,835.77066 16.51346,-49.33135 -5.50448,0 5.50448,-16.51342 24.59599,0 5.50448,5.50447 3.69289,0 5.43481,-5.50447 18.32505,0 5.50449,5.50447 3.62321,0 5.50448,-5.50447 20.06698,0 7.31609,11.00895 -11.98445,39.01911 5.43481,0 -5.29546,15.81671 -32.95723,0 12.89025,-38.39208 -8.22189,0 -7.59479,22.43602 5.43481,0 -5.1561,15.95606 -32.95724,0 12.82057,-38.39208 -8.22188,0 -7.66448,22.57537 5.50449,0 -5.1561,15.81671 -32.95724,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3071"
+         style="fill:#cccccc;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 285.86512,775.43036 4.25029,6.06188 -13.51734,43.3391 5.43481,0 -1.8116,5.43485 -21.94826,0 12.82057,-38.39208 -19.23086,0 -10.93929,32.95723 5.43481,0 -1.81161,5.43485 -21.94826,0 12.82057,-38.39208 -19.23086,0 -10.93929,32.95723 5.50448,0 -1.88127,5.43485 -21.94827,0 16.51346,-49.33135 -5.50449,0 1.8116,-5.50448 20.13667,0 5.50448,5.50448 5.43481,0 5.50448,-5.50448 16.44378,0 5.50449,5.50448 5.50448,0 5.50449,-5.50448 16.58312,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3075"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 193.33403,769.92588 -16.79216,49.95839 5.71351,0 -5.43481,15.88639 -32.88755,0 16.44378,-49.33135 -5.50449,0 38.46172,-16.51343 z m -38.46172,16.51343 5.50449,-16.51343 32.95723,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3079"
+         style="fill:#cccccc;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 173.19737,830.26619 1.8116,-5.43485 -5.50448,0 16.51345,-49.40098 -22.85406,0 -1.88128,5.50448 6.41028,0 -16.44378,49.33135 21.94827,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path3083"
+         style="fill:#cccccc;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20903109000000000;stroke-miterlimit:2.60999990000000004;stroke-opacity:1;stroke-dasharray:none;"
+         d="m 191.45275,758.98656 3.69288,-11.00896 -1.8116,-2.71743 -11.00897,0 -3.62321,2.71743 -3.69288,11.00896 1.88128,2.71742 11.00897,0 3.55353,-2.71742" />
+    </g>
+  </g>
+</svg>

nsis/lang/danish.nsi

@@ -0,0 +1,175 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# danish.nsi: Danish language strings for gvim NSIS installer.
+#
+# Locale ID    : 1030
+# fileencoding : UTF-8
+# Author       : scootergrisen
+
+!insertmacro MUI_LANGUAGE "Danish"
+
+
+# Overwrite the default translation.
+# These string should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_DANISH}         "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_DANISH}         "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_DANISH}     "Destinationsmappe (skal slutte med $\"vim$\")"
+
+LangString str_show_readme          ${LANG_DANISH}     "Vis README efter installationen er gennemført"
+
+# Install types:
+LangString str_type_typical         ${LANG_DANISH}     "Typisk"
+
+LangString str_type_minimal         ${LANG_DANISH}     "Minimal"
+
+LangString str_type_full            ${LANG_DANISH}     "Fuld"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_DANISH}     "Afinstaller eksisterende version(er)"
+LangString str_desc_old_ver         ${LANG_DANISH}     "Afinstaller eksisterende Vim-version(er) fra dit system."
+
+LangString str_section_exe          ${LANG_DANISH}     "Vim GUI og afviklingsfiler"
+LangString str_desc_exe             ${LANG_DANISH}     "Vim GUI-eksekverbare- og afviklingsfiler. Komponenten kræves."
+
+LangString str_section_console      ${LANG_DANISH}     "Vim-konsolprogram"
+LangString str_desc_console         ${LANG_DANISH}     "Konsolversion af Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_DANISH}     "Opret .bat-filer"
+LangString str_desc_batch           ${LANG_DANISH}     "Opret .bat-filer til Vim-varianter i Windows-mappen til brug fra kommandolinjen."
+
+LangString str_group_icons          ${LANG_DANISH}     "Opret ikoner til Vim"
+LangString str_desc_icons           ${LANG_DANISH}     "Opret ikoner til Vim diverse steder for at hjælpe med at gøre adgangen let."
+
+LangString str_section_desktop      ${LANG_DANISH}     "På skrivebordet"
+LangString str_desc_desktop         ${LANG_DANISH}     "Opret ikoner til gVim-eksekverbare på skrivebordet."
+
+LangString str_section_start_menu   ${LANG_DANISH}     "I Programmer-mappen i menuen Start"
+LangString str_desc_start_menu      ${LANG_DANISH}     "Tilføj Vim i Programmer-mappen i menuen Start."
+
+#LangString str_section_quick_launch ${LANG_DANISH}     "I værktøjslinjen Hurtig start"
+#LangString str_desc_quick_launch    ${LANG_DANISH}     "Tilføj Vim-genvej i værktøjslinjen Hurtig start."
+
+LangString str_section_edit_with    ${LANG_DANISH}     "Tilføj Vim-genvejsmenu"
+LangString str_desc_edit_with       ${LANG_DANISH}     "Tilføj Vim til listen i $\"Åbn med...$\"-genvejsmenuen."
+
+#LangString str_section_edit_with32  ${LANG_DANISH}     "32-bit-version"
+#LangString str_desc_edit_with32     ${LANG_DANISH}     "Tilføj Vim til listen i $\"Åbn med...$\"-genvejsmenuen for 32-bit-programmer."
+
+#LangString str_section_edit_with64  ${LANG_DANISH}     "64-bit-version"
+#LangString str_desc_edit_with64     ${LANG_DANISH}     "Tilføj Vim til listen i $\"Åbn med...$\"-genvejsmenuen for 64-bit-programmer."
+
+LangString str_section_vim_rc       ${LANG_DANISH}     "Opret standardkonfiguration"
+LangString str_desc_vim_rc          ${LANG_DANISH}     "Opret en standardkonfigurationsfil (_vimrc) hvis der ikke allerede findes en."
+
+LangString str_group_plugin         ${LANG_DANISH}     "Opret plugin-mapper"
+LangString str_desc_plugin          ${LANG_DANISH}     "Opret plugin-mapper. Plugin-mapper giver mulighed for at udvide Vim ved at slippe en fil i en mappen."
+
+LangString str_section_plugin_home  ${LANG_DANISH}     "Private"
+LangString str_desc_plugin_home     ${LANG_DANISH}     "Opret plugin-mapper i HOME-mappen."
+
+LangString str_section_plugin_vim   ${LANG_DANISH}     "Delte"
+LangString str_desc_plugin_vim      ${LANG_DANISH}     "Opret plugin-mapper i Vim-installationsmappe, det bruges af alle på systemet."
+
+LangString str_section_vis_vim      ${LANG_DANISH}     "VisVim-udvidelser"
+LangString str_desc_vis_vim         ${LANG_DANISH}     "VisVim-udvidelser til integrering i Microsoft Visual Studio."
+
+LangString str_section_nls          ${LANG_DANISH}     "Understøttelse af modersmål"
+LangString str_desc_nls             ${LANG_DANISH}     "Installer filer til understøttelse af modersmål."
+
+LangString str_unsection_register   ${LANG_DANISH}     "Afregistrer Vim"
+LangString str_desc_unregister      ${LANG_DANISH}     "Afregistrer Vim fra systemet."
+
+LangString str_unsection_exe        ${LANG_DANISH}     "Fjern Vim-eksekverbare-/afviklingsfiler"
+LangString str_desc_rm_exe          ${LANG_DANISH}     "Fjern alle Vim-eksekverbare- og afviklingsfiler."
+
+LangString str_ungroup_plugin       ${LANG_DANISH}     "Fjern plugin-mapper"
+LangString str_desc_rm_plugin       ${LANG_DANISH}     "Fjern plugin-mapperne hvis de er tomme."
+
+LangString str_unsection_plugin_home ${LANG_DANISH}    "Privat"
+LangString str_desc_rm_plugin_home  ${LANG_DANISH}     "Fjern plugin-mapperne fra HOME-mappen."
+
+LangString str_unsection_plugin_vim ${LANG_DANISH}     "Delte"
+LangString str_desc_rm_plugin_vim   ${LANG_DANISH}     "Fjern plugin-mapperne fra Vim-installationsmappen."
+
+LangString str_unsection_rootdir    ${LANG_DANISH}     "Fjern Vim-rodmappen"
+LangString str_desc_rm_rootdir      ${LANG_DANISH}     "Fjern Vim-rodmappen. Den indeholder dine Vim-konfigurationsfiler!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_DANISH}     "Fandt $vim_old_ver_count Vim-versioner på dit system.$\r$\nInstallationsguiden kan højst håndtere ${VIM_MAX_OLD_VER}-versioner.$\r$\nFjern venligst nogle versioner og start igen."
+
+#LangString str_msg_invalid_root  ${LANG_DANISH}     "Ugyldig installationssti: $vim_install_root!$\r$\nDen skal slutte med $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_DANISH}     "Uoverensstemmelse i binære sti!$\r$\n$\r$\nForventede at den binære sti var $\"$vim_bin_path$\",$\r$\nmen systemet indikerer at den binære sti er $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_DANISH}     "Vim kører stadig på dit system.$\r$\nLuk venligst alle instanser af Vim inden du fortsætter."
+
+#LangString str_msg_register_ole  ${LANG_DANISH}     "Forsøger at registrere Vim med OLE. Der er ingen meddelelse til at indikere om det virker eller ej."
+
+#LangString str_msg_unreg_ole     ${LANG_DANISH}     "Forsøger at afregistrere Vim med OLE. Der er ingen meddelelse til at indikere om det virker eller ej."
+
+#LangString str_msg_rm_start      ${LANG_DANISH}     "Afinstallerer følgende version:"
+
+#LangString str_msg_rm_fail       ${LANG_DANISH}     "Kunne ikke afinstallere følgende version:"
+
+#LangString str_msg_no_rm_key     ${LANG_DANISH}     "Kan ikke finde registreringsdatabasenøgle for afinstallationsguiden."
+
+#LangString str_msg_no_rm_reg     ${LANG_DANISH}     "Kan ikke finde afinstallationsguiden fra registreringsdatabasen."
+
+#LangString str_msg_no_rm_exe     ${LANG_DANISH}     "Kan ikke tilgå afinstallationsguide."
+
+#LangString str_msg_rm_copy_fail  ${LANG_DANISH}     "Kunne ikke kopiere afinstallationsguide til midlertidig mappe."
+
+#LangString str_msg_rm_run_fail   ${LANG_DANISH}     "Kunne ikke køre afinstallationsguide."
+
+#LangString str_msg_abort_install ${LANG_DANISH}     "Installationsguiden vil afbryde."
+
+LangString str_msg_install_fail  ${LANG_DANISH}     "Installationen mislykkedes. Bedre held næste gang."
+
+LangString str_msg_rm_exe_fail   ${LANG_DANISH}     "Nogle filer i $0 er ikke blevet slettet!$\r$\nDu skal gøre det manuelt."
+
+#LangString str_msg_rm_root_fail  ${LANG_DANISH}     "ADVARSEL: Kan ikke fjerne $\"$vim_install_root$\", den er ikke tom!"
+
+LangString str_msg_uninstalling  ${LANG_DANISH}     "Afinstallerer den gamle version..."
+
+LangString str_msg_registering   ${LANG_DANISH}     "Registrerer..."
+
+LangString str_msg_unregistering ${LANG_DANISH}     "Afregistrerer..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_DANISH}     "Vælg _vimrc-indstillinger"
+LangString str_vimrc_page_subtitle ${LANG_DANISH}     "Vælg indstillingerne til forbedring, tastatur og mus."
+
+LangString str_msg_compat_title    ${LANG_DANISH}     " Vi- / Vim-opførsel "
+LangString str_msg_compat_desc     ${LANG_DANISH}     "&Kompatibilitet og forbedringer"
+LangString str_msg_compat_vi       ${LANG_DANISH}     "Vi-kompatibel"
+LangString str_msg_compat_vim      ${LANG_DANISH}     "Vim original"
+LangString str_msg_compat_defaults ${LANG_DANISH}     "Vim med nogle forbedringer (indlæs defaults.vim)"
+LangString str_msg_compat_all      ${LANG_DANISH}     "Vim med alle forbedringer (indlæs vimrc_example.vim) (standard)"
+
+LangString str_msg_keymap_title   ${LANG_DANISH}     " Tilknytninger "
+LangString str_msg_keymap_desc    ${LANG_DANISH}     "&Gentilknyt nogle få taster (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F osv.)"
+LangString str_msg_keymap_default ${LANG_DANISH}     "Gentilknyt ikke taster (standard)"
+LangString str_msg_keymap_windows ${LANG_DANISH}     "Gentilknyt nogle få taster til Windows"
+
+LangString str_msg_mouse_title   ${LANG_DANISH}     " Mus "
+LangString str_msg_mouse_desc    ${LANG_DANISH}     "&Opførsel af højre og venstre knapper"
+LangString str_msg_mouse_default ${LANG_DANISH}     "Højre: genvejsmenu, venstre: visuel tilstand (standard)"
+LangString str_msg_mouse_windows ${LANG_DANISH}     "Højre: genvejsmenu, venstre: vælg-tilstand (Windows)"
+LangString str_msg_mouse_unix    ${LANG_DANISH}     "Højre: udvider markering, venstre: visuel tilstand (Unix)"

nsis/lang/dutch.nsi

@@ -0,0 +1,281 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# dutch.nsi : Dutch language strings for gvim NSIS installer.
+#
+# Locale ID    : 1043
+# Locale Name  : nl
+# fileencoding : UTF-8
+# Author       : Peter Odding <peter@peterodding.com>
+
+!insertmacro MUI_LANGUAGE "Dutch"
+
+
+# Overwrite the default translation.
+# These string should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_DUTCH} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_DUTCH} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_DUTCH} \
+#    "Doelmap (moet eindigen op $\"vim$\")"
+
+LangString str_show_readme          ${LANG_DUTCH} \
+    "README weergeven na installatie"
+
+# Install types:
+LangString str_type_typical         ${LANG_DUTCH} \
+    "Gebruikelijk"
+
+LangString str_type_minimal         ${LANG_DUTCH} \
+    "Minimaal"
+
+LangString str_type_full            ${LANG_DUTCH} \
+    "Volledig"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_DUTCH} \
+    "Bestaande versie(s) de-installeren"
+LangString str_desc_old_ver         ${LANG_DUTCH} \
+    "Bestaande Vim versie(s) van je systeem verwijderen."
+
+LangString str_section_exe          ${LANG_DUTCH} \
+    "Vim GUI"
+LangString str_desc_exe             ${LANG_DUTCH} \
+    "Vim GUI uitvoerbare bestanden en runtime bestanden.  Dit component is vereist."
+
+LangString str_section_console      ${LANG_DUTCH} \
+    "Vim console programma"
+LangString str_desc_console         ${LANG_DUTCH} \
+    "Console versie van Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_DUTCH} \
+    "Creëer .bat bestanden"
+LangString str_desc_batch           ${LANG_DUTCH} \
+    "Creëer .bat bestanden voor Vim varianten in de Windows map voor \
+     commando regel gebruik."
+
+LangString str_group_icons          ${LANG_DUTCH} \
+    "Creëer pictogrammen for Vim"
+LangString str_desc_icons           ${LANG_DUTCH} \
+    "Creëer pictogrammen voor Vim op verschillende locaties voor gemakkelijke toegang."
+
+LangString str_section_desktop      ${LANG_DUTCH} \
+    "Op het bureaublad"
+LangString str_desc_desktop         ${LANG_DUTCH} \
+    "Creëer pictogrammen voor Vim uitvoerbare bestanden op het bureaublad."
+
+LangString str_section_start_menu   ${LANG_DUTCH} \
+    "In de Programma's map in het start menu"
+LangString str_desc_start_menu      ${LANG_DUTCH} \
+    "Voeg Vim toe aan de programma's map in het start menu.  \
+     Van toepassing op Windows 95 en later."
+
+#LangString str_section_quick_launch ${LANG_DUTCH} \
+#    "In de snel starten balk"
+#LangString str_desc_quick_launch    ${LANG_DUTCH} \
+#    "Voeg Vim snelkoppeling toe aan de snel starten balk."
+
+LangString str_section_edit_with    ${LANG_DUTCH} \
+    "Voeg Vim contextmenu toe"
+LangString str_desc_edit_with       ${LANG_DUTCH} \
+    "Voeg Vim toe aan de $\"Openen met...$\" contextmenu lijst."
+
+#LangString str_section_edit_with32  ${LANG_DUTCH} \
+#    "32-bit versie"
+#LangString str_desc_edit_with32     ${LANG_DUTCH} \
+#    "Voeg Vim toe aan de $\"Openen met...$\" contextmenu lijst \
+#     voor 32-bit toepassingen."
+
+#LangString str_section_edit_with64  ${LANG_DUTCH} \
+#    "64-bit versie"
+#LangString str_desc_edit_with64     ${LANG_DUTCH} \
+#    "Voeg Vim toe aan de $\"Openen met...$\" contextmenu lijst \
+#     voor 64-bit toepassingen."
+
+LangString str_section_vim_rc       ${LANG_DUTCH} \
+    "Creëer standaard configuratie"
+LangString str_desc_vim_rc          ${LANG_DUTCH} \
+    "Creëer een standaard configuratie bestand (_vimrc) als er nog geen bestaat."
+
+LangString str_group_plugin         ${LANG_DUTCH} \
+    "Creëer Plugin mappen"
+LangString str_desc_plugin          ${LANG_DUTCH} \
+    "Creëer plugin mappen.  Plugin mappen maken het mogelijk om \
+     Vim uit te breiden door een bestand in een map te plaatsen."
+
+LangString str_section_plugin_home  ${LANG_DUTCH} \
+    "Privé"
+LangString str_desc_plugin_home     ${LANG_DUTCH} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_DUTCH} \
+    "Gedeeld"
+LangString str_desc_plugin_vim      ${LANG_DUTCH} \
+    "Creëer plugin mappen in Vim installatie map, deze worden gebruikt \
+     voor iedereen op het systeem."
+
+LangString str_section_vis_vim      ${LANG_DUTCH} \
+    "VisVim extensie"
+LangString str_desc_vis_vim         ${LANG_DUTCH} \
+    "VisVim extensie voor Microsoft Visual Studio integratie."
+
+LangString str_section_nls          ${LANG_DUTCH} \
+    "Ondersteuning voor andere talen"
+LangString str_desc_nls             ${LANG_DUTCH} \
+    "Bestanden voor ondersteuning van andere talen dan Engels installeren."
+
+LangString str_unsection_register   ${LANG_DUTCH} \
+    "Vim afmelden"
+LangString str_desc_unregister      ${LANG_DUTCH} \
+    "Registratie van Vim in het systeem ongedaan maken."
+
+LangString str_unsection_exe        ${LANG_DUTCH} \
+    "Vim uitvoerbare/runtime bestanden verwijderen"
+LangString str_desc_rm_exe          ${LANG_DUTCH} \
+    "Verwijder alle Vim uitvoerbare bestanden en runtime bestanden."
+
+LangString str_ungroup_plugin       ${LANG_DUTCH} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_DUTCH} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_DUTCH} \
+    "Privé"
+LangString str_desc_rm_plugin_home  ${LANG_DUTCH} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_DUTCH} \
+    "Gedeeld"
+LangString str_desc_rm_plugin_vim   ${LANG_DUTCH} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_DUTCH} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_DUTCH} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_DUTCH} \
+#    "Er zijn $vim_old_ver_count Vim versies op je systeem gevonden.$\r$\n\
+#     Deze installatie kan omgaan met maximaal ${VIM_MAX_OLD_VER} versies.$\r$\n\
+#     Verwijder a.u.b. wat versies en probeer het dan opnieuw."
+
+#LangString str_msg_invalid_root  ${LANG_DUTCH} \
+#    "Ongeldig installatiepad: $vim_install_root!$\r$\n\
+#     Het moet eindelijk op $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_DUTCH} \
+#    "Binair pad onjuist!$\r$\n$\r$\n\
+#     Het binaire pad zou $\"$vim_bin_path$\" moeten zijn,$\r$\n\
+#     maar het systeem geeft aan dat het binaire pad $\"$INSTDIR$\" is."
+
+#LangString str_msg_vim_running   ${LANG_DUTCH} \
+#    "Vim is nog actief op je systeem.$\r$\n\
+#     Sluit a.u.b. alle instanties van Vim voordat je verder gaat."
+
+#LangString str_msg_register_ole  ${LANG_DUTCH} \
+#    "Bezig met proberen om Vim te registreren met OLE. \
+#     Er is geen bericht dat aangeeft of deze operatie slaagt."
+
+#LangString str_msg_unreg_ole     ${LANG_DUTCH} \
+#    "Bezig met proberen om Vim te de-registreren met OLE. \
+#     Er is geen bericht dat aangeeft of deze operatie slaagt."
+
+#LangString str_msg_rm_start      ${LANG_DUTCH} \
+#    "De volgende versies worden verwijderd:"
+
+#LangString str_msg_rm_fail       ${LANG_DUTCH} \
+#    "De volgende versies konden niet worden verwijderd:"
+
+#LangString str_msg_no_rm_key     ${LANG_DUTCH} \
+#    "Kan de uninstaller register sleutel niet vinden."
+
+#LangString str_msg_no_rm_reg     ${LANG_DUTCH} \
+#    "Kan de uninstaller niet vinden via het register."
+
+#LangString str_msg_no_rm_exe     ${LANG_DUTCH} \
+#    "Kan geen toegang krijgen tot de uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_DUTCH} \
+#    "Kon de uninstaller niet naar een tijdelijke map kopiëren."
+
+#LangString str_msg_rm_run_fail   ${LANG_DUTCH} \
+#    "Kon de uninstaller niet uitvoeren."
+
+#LangString str_msg_abort_install ${LANG_DUTCH} \
+#    "Installatie wordt gestopt."
+
+LangString str_msg_install_fail  ${LANG_DUTCH} \
+    "Installatie is mislukt."
+
+LangString str_msg_rm_exe_fail   ${LANG_DUTCH} \
+    "Sommige bestanden in $0 zijn niet verwijderd!$\r$\n\
+     Dit moet je handmatig doen."
+
+#LangString str_msg_rm_root_fail  ${LANG_DUTCH} \
+#    "WAARSCHUWING: Kan $\"$vim_install_root$\" niet verwijderen omdat het niet leeg is!"
+
+LangString str_msg_uninstalling  ${LANG_DUTCH} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_DUTCH} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_DUTCH} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_DUTCH} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_DUTCH} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_DUTCH} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_DUTCH} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_DUTCH} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_DUTCH} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_DUTCH} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_DUTCH} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_DUTCH} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_DUTCH} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_DUTCH} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_DUTCH} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_DUTCH} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_DUTCH} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_DUTCH} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_DUTCH} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_DUTCH} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/lang/english.nsi

@@ -0,0 +1,280 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# english.nsi: English language strings for gvim NSIS installer.
+#
+# Locale ID    : 1033
+# fileencoding : UTF-8
+# Author       : Guopeng Wen, Ken Takata
+
+!insertmacro MUI_LANGUAGE "English"
+
+
+# Overwrite the default translation.
+# These string should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_ENGLISH} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_ENGLISH} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_ENGLISH} \
+#    "Destination Folder (Must end with $\"vim$\")"
+
+LangString str_show_readme          ${LANG_ENGLISH} \
+    "Show README after installation finish"
+
+# Install types:
+LangString str_type_typical         ${LANG_ENGLISH} \
+    "Typical"
+
+LangString str_type_minimal         ${LANG_ENGLISH} \
+    "Minimal"
+
+LangString str_type_full            ${LANG_ENGLISH} \
+    "Full"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_ENGLISH} \
+    "Uninstall Existing Version(s)"
+LangString str_desc_old_ver         ${LANG_ENGLISH} \
+    "Uninstall existing Vim version(s) from your system."
+
+LangString str_section_exe          ${LANG_ENGLISH} \
+    "Vim GUI and runtime files"
+LangString str_desc_exe             ${LANG_ENGLISH} \
+    "Vim GUI executables and runtime files.  This component is required."
+
+LangString str_section_console      ${LANG_ENGLISH} \
+    "Vim console program"
+LangString str_desc_console         ${LANG_ENGLISH} \
+    "Console version of Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_ENGLISH} \
+    "Create .bat files"
+LangString str_desc_batch           ${LANG_ENGLISH} \
+    "Create .bat files for Vim variants in the Windows directory for \
+     command line use."
+
+LangString str_group_icons          ${LANG_ENGLISH} \
+    "Create icons for Vim"
+LangString str_desc_icons           ${LANG_ENGLISH} \
+    "Create icons for Vim at various locations to facilitate easy access."
+
+LangString str_section_desktop      ${LANG_ENGLISH} \
+    "On the Desktop"
+LangString str_desc_desktop         ${LANG_ENGLISH} \
+    "Create icons for gVim executables on the desktop."
+
+LangString str_section_start_menu   ${LANG_ENGLISH} \
+    "In the Start Menu Programs Folder"
+LangString str_desc_start_menu      ${LANG_ENGLISH} \
+    "Add Vim in the programs folder of the start menu."
+
+#LangString str_section_quick_launch ${LANG_ENGLISH} \
+#    "In the Quick Launch Bar"
+#LangString str_desc_quick_launch    ${LANG_ENGLISH} \
+#    "Add Vim shortcut in the quick launch bar."
+
+LangString str_section_edit_with    ${LANG_ENGLISH} \
+    "Add Vim Context Menu"
+LangString str_desc_edit_with       ${LANG_ENGLISH} \
+    "Add Vim to the $\"Open With...$\" context menu list."
+
+#LangString str_section_edit_with32  ${LANG_ENGLISH} \
+#    "32-bit Version"
+#LangString str_desc_edit_with32     ${LANG_ENGLISH} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 32-bit applications."
+
+#LangString str_section_edit_with64  ${LANG_ENGLISH} \
+#    "64-bit Version"
+#LangString str_desc_edit_with64     ${LANG_ENGLISH} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 64-bit applications."
+
+LangString str_section_vim_rc       ${LANG_ENGLISH} \
+    "Create Default Config"
+LangString str_desc_vim_rc          ${LANG_ENGLISH} \
+    "Create a default config file (_vimrc) if one does not already exist."
+
+LangString str_group_plugin         ${LANG_ENGLISH} \
+    "Create Plugin Directories"
+LangString str_desc_plugin          ${LANG_ENGLISH} \
+    "Create plugin directories.  Plugin directories allow extending Vim \
+     by dropping a file into a directory."
+
+LangString str_section_plugin_home  ${LANG_ENGLISH} \
+    "Private"
+LangString str_desc_plugin_home     ${LANG_ENGLISH} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_ENGLISH} \
+    "Shared"
+LangString str_desc_plugin_vim      ${LANG_ENGLISH} \
+    "Create plugin directories in Vim install directory, it is used for \
+     everybody on the system."
+
+LangString str_section_vis_vim      ${LANG_ENGLISH} \
+    "VisVim Extension"
+LangString str_desc_vis_vim         ${LANG_ENGLISH} \
+    "VisVim Extension for Microsoft Visual Studio integration."
+
+LangString str_section_nls          ${LANG_ENGLISH} \
+    "Native Language Support"
+LangString str_desc_nls             ${LANG_ENGLISH} \
+    "Install files for native language support."
+
+LangString str_unsection_register   ${LANG_ENGLISH} \
+    "Unregister Vim"
+LangString str_desc_unregister      ${LANG_ENGLISH} \
+    "Unregister Vim from the system."
+
+LangString str_unsection_exe        ${LANG_ENGLISH} \
+    "Remove Vim Executables/Runtime Files"
+LangString str_desc_rm_exe          ${LANG_ENGLISH} \
+    "Remove all Vim executables and runtime files."
+
+LangString str_ungroup_plugin       ${LANG_ENGLISH} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_ENGLISH} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_ENGLISH} \
+    "Private"
+LangString str_desc_rm_plugin_home  ${LANG_ENGLISH} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_ENGLISH} \
+    "Shared"
+LangString str_desc_rm_plugin_vim   ${LANG_ENGLISH} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_ENGLISH} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_ENGLISH} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_ENGLISH} \
+#    "Found $vim_old_ver_count Vim versions on your system.$\r$\n\
+#     This installer can only handle ${VIM_MAX_OLD_VER} versions \
+#     at most.$\r$\n\
+#     Please remove some versions and start again."
+
+#LangString str_msg_invalid_root  ${LANG_ENGLISH} \
+#    "Invalid install path: $vim_install_root!$\r$\n\
+#     It should end with $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_ENGLISH} \
+#    "Binary path mismatch!$\r$\n$\r$\n\
+#     Expect the binary path to be $\"$vim_bin_path$\",$\r$\n\
+#     but system indicates the binary path is $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_ENGLISH} \
+#    "Vim is still running on your system.$\r$\n\
+#     Please close all instances of Vim before you continue."
+
+#LangString str_msg_register_ole  ${LANG_ENGLISH} \
+#    "Attempting to register Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_unreg_ole     ${LANG_ENGLISH} \
+#    "Attempting to unregister Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_rm_start      ${LANG_ENGLISH} \
+#    "Uninstalling the following version:"
+
+#LangString str_msg_rm_fail       ${LANG_ENGLISH} \
+#    "Fail to uninstall the following version:"
+
+#LangString str_msg_no_rm_key     ${LANG_ENGLISH} \
+#    "Cannot find uninstaller registry key."
+
+#LangString str_msg_no_rm_reg     ${LANG_ENGLISH} \
+#    "Cannot find uninstaller from registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_ENGLISH} \
+#    "Cannot access uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_ENGLISH} \
+#    "Fail to copy uninstaller to temporary directory."
+
+#LangString str_msg_rm_run_fail   ${LANG_ENGLISH} \
+#    "Fail to run uninstaller."
+
+#LangString str_msg_abort_install ${LANG_ENGLISH} \
+#    "Installer will abort."
+
+LangString str_msg_install_fail  ${LANG_ENGLISH} \
+    "Installation failed. Better luck next time."
+
+LangString str_msg_rm_exe_fail   ${LANG_ENGLISH} \
+    "Some files in $0 have not been deleted!$\r$\n\
+     You must do it manually."
+
+#LangString str_msg_rm_root_fail  ${LANG_ENGLISH} \
+#    "WARNING: Cannot remove $\"$vim_install_root$\", it is not empty!"
+
+LangString str_msg_uninstalling  ${LANG_ENGLISH} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_ENGLISH} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_ENGLISH} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_ENGLISH} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_ENGLISH} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_ENGLISH} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_ENGLISH} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_ENGLISH} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_ENGLISH} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_ENGLISH} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_ENGLISH} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_ENGLISH} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_ENGLISH} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_ENGLISH} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_ENGLISH} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_ENGLISH} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_ENGLISH} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_ENGLISH} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_ENGLISH} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_ENGLISH} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/lang/german.nsi

@@ -0,0 +1,280 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# german.nsi : German language strings for gvim NSIS installer.
+#
+# Locale ID    : 1031
+# fileencoding : UTF-8
+# Author       : Christian Brabandt, tux
+
+!insertmacro MUI_LANGUAGE "German"
+
+
+# Overwrite the default translation.
+# These string should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_GERMAN} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_GERMAN} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_GERMAN} \
+#    "Zielverzeichnis auswählen (muss auf $\"vim$\" enden)"
+
+LangString str_show_readme          ${LANG_GERMAN} \
+    "README-Datei nach der Installation anzeigen"
+
+# Install types:
+LangString str_type_typical         ${LANG_GERMAN} \
+    "Typisch"
+
+LangString str_type_minimal         ${LANG_GERMAN} \
+    "Minimal"
+
+LangString str_type_full            ${LANG_GERMAN} \
+    "Vollständig"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_GERMAN} \
+    "Vorherige Version deinstallieren"
+LangString str_desc_old_ver         ${LANG_GERMAN} \
+    "Vorherige installierte Versionen auf diesem System deinstallieren."
+
+LangString str_section_exe          ${LANG_GERMAN} \
+    "Vim GUI"
+LangString str_desc_exe             ${LANG_GERMAN} \
+    "Vim (Anwendung) und Laufzeitdateien (Dieser Teil ist zwingend \
+     erforderlich)."
+
+LangString str_section_console      ${LANG_GERMAN} \
+    "Vim Konsolenanwendung"
+LangString str_desc_console         ${LANG_GERMAN} \
+    "Konsolenversion von Vim."
+
+LangString str_section_batch        ${LANG_GERMAN} \
+    ".bat-Dateien erstellen"
+LangString str_desc_batch           ${LANG_GERMAN} \
+    ".bat-Dateien erstellen, um Vim in der Konsole auszuführen."
+
+LangString str_group_icons          ${LANG_GERMAN} \
+    "Vim-Verknüpfungen erstellen"
+LangString str_desc_icons           ${LANG_GERMAN} \
+    "Verknüpfungen mit Vim für einfachen Aufruf erstellen."
+
+LangString str_section_desktop      ${LANG_GERMAN} \
+    "Auf dem Desktop"
+LangString str_desc_desktop         ${LANG_GERMAN} \
+    "Icons für GVim auf dem Desktop erstellen."
+
+LangString str_section_start_menu   ${LANG_GERMAN} \
+    "Im Startmenü"
+LangString str_desc_start_menu      ${LANG_GERMAN} \
+    "Vim im Programmverzeichnis des Startmenüs hinzufügen."
+
+#LangString str_section_quick_launch ${LANG_GERMAN} \
+#    "In der Schnellstartleiste"
+#LangString str_desc_quick_launch    ${LANG_GERMAN} \
+#    "Verknüpfung zu Vim in der Schnellstartleiste ablegen."
+
+LangString str_section_edit_with    ${LANG_GERMAN} \
+    "Vim zum Kontextmenü hinzufügen"
+LangString str_desc_edit_with       ${LANG_GERMAN} \
+    "Vim in das $\"Öffnen mit...$\"-Kontextmenü einfügen."
+
+#LangString str_section_edit_with32  ${LANG_GERMAN} \
+#    "32-Bit-Version"
+#LangString str_desc_edit_with32     ${LANG_GERMAN} \
+#    "Vim in das $\"Öffnen mit...$\"-Kontextmenü \
+#     für 32-Bit-Anwendungen integrieren."
+
+#LangString str_section_edit_with64  ${LANG_GERMAN} \
+#    "64-Bit-Version"
+#LangString str_desc_edit_with64     ${LANG_GERMAN} \
+#    "Vim in das $\"Öffnen mit...$\"-Kontextmenü \
+#     für 64-Bit-Anwendungen integrieren."
+
+LangString str_section_vim_rc       ${LANG_GERMAN} \
+    "Standard-Konfigurationsdatei erstellen"
+LangString str_desc_vim_rc          ${LANG_GERMAN} \
+    "Eine Standard-Konfigurationsdatei (_vimrc) erstellen, \
+     falls noch keine existiert."
+
+LangString str_group_plugin         ${LANG_GERMAN} \
+    "Plugin-Verzeichnisse anlegen"
+LangString str_desc_plugin          ${LANG_GERMAN} \
+    "Plugin-Verzeichnisse anlegen. Plugins erlauben es, Vim \
+     um zusätzliche Funktionen zu erweitern."
+
+LangString str_section_plugin_home  ${LANG_GERMAN} \
+    "Privat"
+LangString str_desc_plugin_home     ${LANG_GERMAN} \
+    "Erstelle Plugin-Verzeichnis im HOME Benutzerverzeichnis."
+
+LangString str_section_plugin_vim   ${LANG_GERMAN} \
+    "Freigegeben"
+LangString str_desc_plugin_vim      ${LANG_GERMAN} \
+    "Plugin-Verzeichnisse im Vim-Installationsverzeichnis erstellen. Diese werden \
+     für alle Benutzer dieses Systems genutzt."
+
+LangString str_section_vis_vim      ${LANG_GERMAN} \
+    "VisVim-Erweiterung"
+LangString str_desc_vis_vim         ${LANG_GERMAN} \
+    "VisVim-Erweiterung zur Integration in Microsoft Visual Studio."
+
+LangString str_section_nls          ${LANG_GERMAN} \
+    "Unterstützung für andere Sprachen"
+LangString str_desc_nls             ${LANG_GERMAN} \
+    "Dateien zur Unterstützung anderer Sprachen als Englisch installieren."
+
+LangString str_unsection_register   ${LANG_GERMAN} \
+    "Vim deinstallieren"
+LangString str_desc_unregister      ${LANG_GERMAN} \
+    "Vim vom System entfernen."
+
+LangString str_unsection_exe        ${LANG_GERMAN} \
+    "Vim-Anwendung und Laufzeitdateien entfernen"
+LangString str_desc_rm_exe          ${LANG_GERMAN} \
+    "Alle Vim-Anwendungen und Laufzeitdateien von diesem System entfernen."
+
+LangString str_ungroup_plugin       ${LANG_GERMAN} \
+    "Entferne Plugin-Verzeichnisse"
+LangString str_desc_rm_plugin       ${LANG_GERMAN} \
+    "Entferne Plugin-Verzeichnisse, falls sie leer sind."
+
+LangString str_unsection_plugin_home ${LANG_GERMAN} \
+    "Privat"
+LangString str_desc_rm_plugin_home  ${LANG_GERMAN} \
+    "Entfernt die Plugin-Verzeichnisse aus dem HOME Benutzerverzeichnis."
+
+LangString str_unsection_plugin_vim ${LANG_GERMAN} \
+    "Freigegeben"
+LangString str_desc_rm_plugin_vim   ${LANG_GERMAN} \
+    "Entfernt das Plugin-Verzeichnis aus dem Vim-Installationsverzeichnis."
+
+LangString str_unsection_rootdir    ${LANG_GERMAN} \
+    "Entferne Vim Installationsverzeichnis"
+LangString str_desc_rm_rootdir      ${LANG_GERMAN} \
+    "Entfernt das Vim Installationsverzeichnis. Es enthält die Vim Konfigurationsdateien!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_GERMAN} \
+#    "$vim_old_ver_count Vim-Versionen auf diesem System gefunden..$\r$\n\
+#     Dieser Installer kann maximal ${VIM_MAX_OLD_VER} Versionen \
+#     handhaben.$\r$\n\
+#     Bitte alte Versionen entfernen und noch einmal probieren."
+
+#LangString str_msg_invalid_root  ${LANG_GERMAN} \
+#    "Nicht gültiges Installationsverzeichnis: $vim_install_root!$\r$\n\
+#     Der Pfad muss auf $\"vim$\" enden."
+
+#LangString str_msg_bin_mismatch  ${LANG_GERMAN} \
+#    "Pfaddiskrepanz!$\r$\n$\r$\n\
+#     Erwarte Anwendungsverzeichnis $\"$vim_bin_path$\",$\r$\n\
+#     aber fand Anwendungspfad $\"$INSTDIR$\" vor."
+
+#LangString str_msg_vim_running   ${LANG_GERMAN} \
+#    "Laufender Vim-Prozess erkannt.$\r$\n\
+#     Bitte alle laufenden Vim-Prozesse vor dem Fortfahren beenden."
+
+#LangString str_msg_register_ole  ${LANG_GERMAN} \
+#    "Versuche OLE-Registrierung durchzuführen."
+
+#LangString str_msg_unreg_ole     ${LANG_GERMAN} \
+#    "Versuche OLE-Registrierung zu löschen."
+
+#LangString str_msg_rm_start      ${LANG_GERMAN} \
+#    "Deinstalliere die folgende Version:"
+
+#LangString str_msg_rm_fail       ${LANG_GERMAN} \
+#    "Deinstallation der Version fehlgeschlagen:"
+
+#LangString str_msg_no_rm_key     ${LANG_GERMAN} \
+#    "Deinstallationsschlüssel in der Registrierungsdatenbank nicht gefunden."
+
+#LangString str_msg_no_rm_reg     ${LANG_GERMAN} \
+#    "Kein Uninstaller in der Registrierungsdatenbank gefunden."
+
+#LangString str_msg_no_rm_exe     ${LANG_GERMAN} \
+#    "Kein Zugriff auf den Uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_GERMAN} \
+#    "Fehler beim Kopieren des Uninstallers in ein temporäres Verzeichnis."
+
+#LangString str_msg_rm_run_fail   ${LANG_GERMAN} \
+#    "Fehler beim Aufruf des Uninstallers."
+
+#LangString str_msg_abort_install ${LANG_GERMAN} \
+#    "Installation wird abgebrochen."
+
+LangString str_msg_install_fail  ${LANG_GERMAN} \
+    "Installation fehlerhaft beendet."
+
+LangString str_msg_rm_exe_fail   ${LANG_GERMAN} \
+    "Einige Dateien im Pfad $0 konnten nicht gelöscht werden!$\r$\n\
+     Diese Dateien müssen manuell gelöscht werden."
+
+#LangString str_msg_rm_root_fail  ${LANG_GERMAN} \
+#    "Achtung: Kann Verzeichnis $\"$vim_install_root$\" nicht entfernen, \
+#     weil es nicht leer ist!"
+
+LangString str_msg_uninstalling  ${LANG_GERMAN} \
+    "Deinstalliere alte Version..."
+
+LangString str_msg_registering   ${LANG_GERMAN} \
+    "Registriere..."
+
+LangString str_msg_unregistering ${LANG_GERMAN} \
+    "Entferne Registrierung..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_GERMAN} \
+    "Wähle _vimrc Konfigurationsoptionen"
+LangString str_vimrc_page_subtitle ${LANG_GERMAN} \
+    "Wähle Einstellungen zur Kompatibilität, Tastatur und Maus."
+
+LangString str_msg_compat_title    ${LANG_GERMAN} \
+    " Vi / Vim Verhalten "
+LangString str_msg_compat_desc     ${LANG_GERMAN} \
+    "&Kompatibilität und Erweiterungen"
+LangString str_msg_compat_vi       ${LANG_GERMAN} \
+    "Vi-kompatibel"
+LangString str_msg_compat_vim      ${LANG_GERMAN} \
+    "Vim Original"
+LangString str_msg_compat_defaults ${LANG_GERMAN} \
+    "Vim mit einigen Erweiterungen (Lädt defaults.vim)"
+LangString str_msg_compat_all      ${LANG_GERMAN} \
+    "Vim mit allen Erweiterungen (Lädt vimrc_example.vim) (Standard)"
+
+LangString str_msg_keymap_title   ${LANG_GERMAN} \
+    " Mappings für Windows Standard Tastenkombinationen "
+LangString str_msg_keymap_desc    ${LANG_GERMAN} \
+    "&Einige Tasten umkonfigurieren (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_GERMAN} \
+    "Keine Tasten umkonfigurieren (Standard)"
+LangString str_msg_keymap_windows ${LANG_GERMAN} \
+    "Einige Tasten umkonfigurieren"
+
+LangString str_msg_mouse_title   ${LANG_GERMAN} \
+    " Maus "
+LangString str_msg_mouse_desc    ${LANG_GERMAN} \
+    "&Verhalten der linken und rechten Buttons"
+LangString str_msg_mouse_default ${LANG_GERMAN} \
+    "Rechts: Popup Menü, Links: Visueller Modus (Standard)"
+LangString str_msg_mouse_windows ${LANG_GERMAN} \
+    "Rechts: Popup Menü, Links: Auswahl Modus (Windows)"
+LangString str_msg_mouse_unix    ${LANG_GERMAN} \
+    "Rechts: Auswahl erweitern, Links: Visueller Modus (Unix)"

nsis/lang/italian.nsi

@@ -0,0 +1,290 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# italian.nsi : Italian language strings for gvim NSIS installer.
+#
+# Locale ID    : 1040
+# Locale Name  : it
+# fileencoding : latin1
+# Author       : Antonio Colombo
+
+!insertmacro MUI_LANGUAGE "Italian"
+
+
+# Overwrite the default translation.
+# These string should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_ITALIAN} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_ITALIAN} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_ITALIAN} \
+#    "Cartella d'installazione (il nome deve finire con $\"vim$\")"
+
+LangString str_show_readme          ${LANG_ITALIAN} \
+    "Visualizza README al termine dell'installazione"
+
+# Install types:
+LangString str_type_typical         ${LANG_ITALIAN} \
+    "Tipica"
+
+LangString str_type_minimal         ${LANG_ITALIAN} \
+    "Minima"
+
+LangString str_type_full            ${LANG_ITALIAN} \
+    "Completa"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_ITALIAN} \
+    "Disinstalla versione/i esistente/i"
+LangString str_desc_old_ver         ${LANG_ITALIAN} \
+    "Disinstalla versione/i esistente/i di Vim dal vostro sistema."
+
+LangString str_section_exe          ${LANG_ITALIAN} \
+    "Vim GUI (gvim.exe per Windows)"
+LangString str_desc_exe             ${LANG_ITALIAN} \
+    "Vim GUI programmi e file di supporto.  Questa componente è indispensabile."
+
+LangString str_section_console      ${LANG_ITALIAN} \
+    "Vim console (vim.exe per MS-DOS)"
+LangString str_desc_console         ${LANG_ITALIAN} \
+    "Versione console di Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_ITALIAN} \
+    "Crea file di invocazione (MS-DOS) .bat"
+LangString str_desc_batch           ${LANG_ITALIAN} \
+    "Crea file di invocazione .bat per varianti di Vim nella directory \
+     di Windows, da utilizzare da linea di comando (MS-DOS)."
+
+LangString str_group_icons          ${LANG_ITALIAN} \
+    "Crea icone per Vim"
+LangString str_desc_icons           ${LANG_ITALIAN} \
+    "Crea icone per Vim in vari posti, per rendere facile l'accesso."
+
+LangString str_section_desktop      ${LANG_ITALIAN} \
+    "Sul Desktop"
+LangString str_desc_desktop         ${LANG_ITALIAN} \
+    "Crea icone per programma gvim sul desktop."
+
+LangString str_section_start_menu   ${LANG_ITALIAN} \
+    "Nella cartella del menù START"
+LangString str_desc_start_menu      ${LANG_ITALIAN} \
+    "Aggiungi Vim alle cartelle del menù START.  \
+     Disponibile solo da Windows 95 in avanti."
+
+#LangString str_section_quick_launch ${LANG_ITALIAN} \
+#    "Nella barra di Avvio Veloce"
+#LangString str_desc_quick_launch    ${LANG_ITALIAN} \
+#    "Aggiungi un puntatore a Vim nella barra di Avvio Veloce."
+
+LangString str_section_edit_with    ${LANG_ITALIAN} \
+    "Aggiungi Vim al Menù Contestuale"
+LangString str_desc_edit_with       ${LANG_ITALIAN} \
+    "Aggiungi Vim alla lista contestuale $\"Apri con...$\"."
+
+#LangString str_section_edit_with32  ${LANG_ITALIAN} \
+#    "Versione a 32-bit"
+#LangString str_desc_edit_with32     ${LANG_ITALIAN} \
+#    "Aggiungi Vim alla lista contestuale $\"Apri con...$\" \
+#     per applicazioni a 32-bit."
+
+#LangString str_section_edit_with64  ${LANG_ITALIAN} \
+#    "Versione a 64-bit"
+#LangString str_desc_edit_with64     ${LANG_ITALIAN} \
+#    "Aggiungi Vim alla lista contestuale $\"Apri con...$\" \
+#     per applicazioni a 64-bit."
+
+LangString str_section_vim_rc       ${LANG_ITALIAN} \
+    "Crea Configurazione di default"
+LangString str_desc_vim_rc          ${LANG_ITALIAN} \
+    "Crea file configurazione di default (_vimrc) se non ne \
+     esiste già uno."
+
+LangString str_group_plugin         ${LANG_ITALIAN} \
+    "Crea Directory per Plugin"
+LangString str_desc_plugin          ${LANG_ITALIAN} \
+    "Crea Directory per Plugin.  Servono per aggiungere funzionalità \
+     a Vim aggiungendo file a una di queste directory."
+
+LangString str_section_plugin_home  ${LANG_ITALIAN} \
+    "Privato"
+LangString str_desc_plugin_home     ${LANG_ITALIAN} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_ITALIAN} \
+    "Condiviso"
+LangString str_desc_plugin_vim      ${LANG_ITALIAN} \
+    "Crea Directory Plugin nella directory di installazione di Vim \
+     per uso da parte di tutti gli utenti di questo sistema."
+
+LangString str_section_vis_vim      ${LANG_ITALIAN} \
+    "Estensione VisVim"
+LangString str_desc_vis_vim         ${LANG_ITALIAN} \
+    "Estensione VisVim per integrazione con Microsoft Visual Studio."
+
+LangString str_section_nls          ${LANG_ITALIAN} \
+    "Supporto Multilingue (NLS)"
+LangString str_desc_nls             ${LANG_ITALIAN} \
+    "Installa file per supportare messaggi in diverse lingue."
+
+LangString str_unsection_register   ${LANG_ITALIAN} \
+    "Togli Vim dal Registry"
+LangString str_desc_unregister      ${LANG_ITALIAN} \
+    "Togli Vim dal Registry di configurazione sistema."
+
+LangString str_unsection_exe        ${LANG_ITALIAN} \
+    "Cancella programmi/file_ausiliari Vim"
+LangString str_desc_rm_exe          ${LANG_ITALIAN} \
+    "Cancella tutti i programmi/file_ausiliari di Vim."
+
+LangString str_unsection_rc         ${LANG_ITALIAN} \
+    "Cancella file di configurazione di Vim"
+LangString str_desc_rm_rc           ${LANG_ITALIAN} \
+    "Cancella file di configurazione di Vim $vim_install_root\_vimrc. \
+     Da saltare se avete personalizzato il file di configurazione."
+
+LangString str_ungroup_plugin       ${LANG_ITALIAN} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_ITALIAN} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_ITALIAN} \
+    "Privato"
+LangString str_desc_rm_plugin_home  ${LANG_ITALIAN} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_ITALIAN} \
+    "Condiviso"
+LangString str_desc_rm_plugin_vim   ${LANG_ITALIAN} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_ITALIAN} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_ITALIAN} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_ITALIAN} \
+#    "Trovate $vim_old_ver_count versioni di Vim sul vostro sistema.$\r$\n\
+#     Questo programma di installazione può gestirne solo \
+#     ${VIM_MAX_OLD_VER}.$\r$\n\
+#     Disinstallate qualche versione precedente e ricominciate."
+
+#LangString str_msg_invalid_root  ${LANG_ITALIAN} \
+#    "Nome di directory di installazione non valida: $vim_install_root!$\r$\n\
+#     Dovrebbe terminare con $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_ITALIAN} \
+#    "Incongruenza di installazione!$\r$\n$\r$\n\
+#     Cartella di installazione dev'essere $\"$vim_bin_path$\",$\r$\n\
+#     ma il sistema segnala invece $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_ITALIAN} \
+#    "Vim ancora in esecuzione sul vostro sistema.$\r$\n\
+#     Chiudete tutte le sessioni attive di Vim per continuare."
+
+#LangString str_msg_register_ole  ${LANG_ITALIAN} \
+#    "Tentativo di registrazione di Vim con OLE. \
+#     Non ci sono messaggi che indicano se ha funzionato o no."
+
+#LangString str_msg_unreg_ole     ${LANG_ITALIAN} \
+#    "Tentativo di togliere da Registry  Vim con OLE. \
+#     Non ci sono messaggi che indicano se ha funzionato o no."
+
+#LangString str_msg_rm_start      ${LANG_ITALIAN} \
+#    "Disinstallazione delle seguenti versioni:"
+
+#LangString str_msg_rm_fail       ${LANG_ITALIAN} \
+#    "Disinstallazione non riuscita per la seguente versione:"
+
+#LangString str_msg_no_rm_key     ${LANG_ITALIAN} \
+#    "Non riesco a trovare chiave di disinstallazione nel Registry."
+
+#LangString str_msg_no_rm_reg     ${LANG_ITALIAN} \
+#    "Non riesco a trovare programma disinstallazione nel Registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_ITALIAN} \
+#    "Non riesco a utilizzare programma disinstallazione."
+
+#LangString str_msg_rm_copy_fail  ${LANG_ITALIAN} \
+#    "Non riesco a copiare programma disinstallazione a una \
+#     directory temporanea."
+
+#LangString str_msg_rm_run_fail   ${LANG_ITALIAN} \
+#    "Non riesco a eseguire programma disinstallazione."
+
+#LangString str_msg_abort_install ${LANG_ITALIAN} \
+#    "Il programma di disinstallazione verrà chiuso senza aver fatto nulla."
+
+LangString str_msg_install_fail  ${LANG_ITALIAN} \
+    "Installazione non riuscita. Miglior fortuna alla prossima!"
+
+LangString str_msg_rm_exe_fail   ${LANG_ITALIAN} \
+    "Alcuni file in $0 non sono stati cancellati!$\r$\n\
+     Dovreste cancellarli voi stessi."
+
+#LangString str_msg_rm_root_fail  ${LANG_ITALIAN} \
+#    "AVVISO: Non posso cancellare $\"$vim_install_root$\", non è vuota!"
+
+LangString str_msg_uninstalling  ${LANG_ITALIAN} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_ITALIAN} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_ITALIAN} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_ITALIAN} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_ITALIAN} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_ITALIAN} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_ITALIAN} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_ITALIAN} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_ITALIAN} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_ITALIAN} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_ITALIAN} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_ITALIAN} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_ITALIAN} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_ITALIAN} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_ITALIAN} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_ITALIAN} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_ITALIAN} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_ITALIAN} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_ITALIAN} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_ITALIAN} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/lang/japanese.nsi

@@ -0,0 +1,287 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# japanese.nsi: Japanese language strings for gvim NSIS installer.
+#
+# Locale ID    : 1041
+# fileencoding : UTF-8
+# Author       : Ken Takata
+
+!insertmacro MUI_LANGUAGE "Japanese"
+
+
+# Overwrite the default translation.
+# These string should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_JAPANESE} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_JAPANESE} \
+        "$(^Name) Uninstall"
+
+# Workarounds for NSIS Japanese translation. The messages are too long.
+# These should be better to be fixed by the NSIS upstream.
+LangString ^SpaceAvailable   ${LANG_JAPANESE} \
+        "利用可能なディスク容量："
+LangString ^SpaceRequired    ${LANG_JAPANESE} \
+        "必要なディスク容量："
+# Fix another NSIS Japanese translation. The access key was missing.
+LangString ^InstallBtn       ${LANG_JAPANESE} \
+        "インストール(&I)"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_JAPANESE} \
+#    "Destination Folder (Must end with $\"vim$\")"
+
+LangString str_show_readme          ${LANG_JAPANESE} \
+    "インストール完了後に README を表示する"
+
+# Install types:
+LangString str_type_typical         ${LANG_JAPANESE} \
+    "通常"
+
+LangString str_type_minimal         ${LANG_JAPANESE} \
+    "最小"
+
+LangString str_type_full            ${LANG_JAPANESE} \
+    "全て"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_JAPANESE} \
+    "既存のバージョンをアンインストール"
+LangString str_desc_old_ver         ${LANG_JAPANESE} \
+    "すでにインストールされている Vim をシステムから削除します。"
+
+LangString str_section_exe          ${LANG_JAPANESE} \
+    "Vim GUI とランタイムファイル"
+LangString str_desc_exe             ${LANG_JAPANESE} \
+    "Vim GUI 実行ファイルとラインタイムファイル。このコンポーネントは必須です。"
+
+LangString str_section_console      ${LANG_JAPANESE} \
+    "Vim コンソールプログラム"
+LangString str_desc_console         ${LANG_JAPANESE} \
+    "コンソール版の Vim (vim.exe)。"
+
+LangString str_section_batch        ${LANG_JAPANESE} \
+    ".bat ファイルを作成"
+LangString str_desc_batch           ${LANG_JAPANESE} \
+    "コマンドラインから Vim と関連コマンドを実行できるように、.bat ファイルを Windows ディレクトリに作成します。"
+
+LangString str_group_icons          ${LANG_JAPANESE} \
+    "Vim のアイコンを作成"
+LangString str_desc_icons           ${LANG_JAPANESE} \
+    "Vim を簡単に実行できるように、いくつかの場所にアイコンを作成します。"
+
+LangString str_section_desktop      ${LANG_JAPANESE} \
+    "デスクトップ上"
+LangString str_desc_desktop         ${LANG_JAPANESE} \
+    "gVim 実行ファイルのアイコンをデスクトップ上に作成します。"
+
+LangString str_section_start_menu   ${LANG_JAPANESE} \
+    "スタートメニューのプログラムフォルダー上"
+LangString str_desc_start_menu      ${LANG_JAPANESE} \
+    "Vim のアイコンをスタートメニューのプログラムフォルダー上に作成します。"
+
+#LangString str_section_quick_launch ${LANG_JAPANESE} \
+#    "In the Quick Launch Bar"
+#LangString str_desc_quick_launch    ${LANG_JAPANESE} \
+#    "Add Vim shortcut in the quick launch bar."
+
+LangString str_section_edit_with    ${LANG_JAPANESE} \
+    "Vim のコンテキストメニューを追加"
+LangString str_desc_edit_with       ${LANG_JAPANESE} \
+    "$\"Vimで編集する$\" をコンテキストメニューに追加します。"
+
+#LangString str_section_edit_with32  ${LANG_JAPANESE} \
+#    "32-bit Version"
+#LangString str_desc_edit_with32     ${LANG_JAPANESE} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 32-bit applications."
+
+#LangString str_section_edit_with64  ${LANG_JAPANESE} \
+#    "64-bit Version"
+#LangString str_desc_edit_with64     ${LANG_JAPANESE} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 64-bit applications."
+
+LangString str_section_vim_rc       ${LANG_JAPANESE} \
+    "既定のコンフィグを作成"
+LangString str_desc_vim_rc          ${LANG_JAPANESE} \
+    "もし無ければ、既定のコンフィグファイル (_vimrc) を作成します。"
+
+LangString str_group_plugin         ${LANG_JAPANESE} \
+    "プラグインディレクトリを作成"
+LangString str_desc_plugin          ${LANG_JAPANESE} \
+    "プラグインディレクトリを作成します。そこにプラグインファイルを置くことで Vim を拡張することができます。"
+
+LangString str_section_plugin_home  ${LANG_JAPANESE} \
+    "個人用"
+LangString str_desc_plugin_home     ${LANG_JAPANESE} \
+    "プラグインディレクトリをホームディレクトリに作成します。"
+
+LangString str_section_plugin_vim   ${LANG_JAPANESE} \
+    "共用"
+LangString str_desc_plugin_vim      ${LANG_JAPANESE} \
+    "プラグインディレクトリを Vim のインストールディレクトリに作成します。システムの全員で共有されます。"
+
+LangString str_section_vis_vim      ${LANG_JAPANESE} \
+    "VisVim 拡張"
+LangString str_desc_vis_vim         ${LANG_JAPANESE} \
+    "Microsoft Visual Studio 統合用の VisVim 拡張。"
+
+LangString str_section_nls          ${LANG_JAPANESE} \
+    "多言語サポート"
+LangString str_desc_nls             ${LANG_JAPANESE} \
+    "多言語サポート用のファイルをインストールします。"
+
+LangString str_unsection_register   ${LANG_JAPANESE} \
+    "Vim を登録解除"
+LangString str_desc_unregister      ${LANG_JAPANESE} \
+    "Vim をシステムから登録解除します。"
+
+LangString str_unsection_exe        ${LANG_JAPANESE} \
+    "Vim の実行ファイル/ランタイムファイルを削除"
+LangString str_desc_rm_exe          ${LANG_JAPANESE} \
+    "全ての Vim の実行ファイルとランタイムファイルを削除します。"
+
+LangString str_ungroup_plugin       ${LANG_JAPANESE} \
+    "プラグインディレクトリを削除"
+LangString str_desc_rm_plugin       ${LANG_JAPANESE} \
+    "プラグインディレクトリが空であればそれを削除します。"
+
+LangString str_unsection_plugin_home ${LANG_JAPANESE} \
+    "個人用"
+LangString str_desc_rm_plugin_home  ${LANG_JAPANESE} \
+    "プラグインディレクトリをホームディレクトリから削除します。"
+
+LangString str_unsection_plugin_vim ${LANG_JAPANESE} \
+    "共用"
+LangString str_desc_rm_plugin_vim   ${LANG_JAPANESE} \
+    "プラグインディレクトリを Vim のインストールディレクトリから削除します。"
+
+LangString str_unsection_rootdir    ${LANG_JAPANESE} \
+    "Vim のトップディレクトリを削除"
+LangString str_desc_rm_rootdir      ${LANG_JAPANESE} \
+    "Vim のトップディレクトリを削除します。あなたの Vim の設定ファイルも含まれていることに注意してください！"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_JAPANESE} \
+#    "Found $vim_old_ver_count Vim versions on your system.$\r$\n\
+#     This installer can only handle ${VIM_MAX_OLD_VER} versions \
+#     at most.$\r$\n\
+#     Please remove some versions and start again."
+
+#LangString str_msg_invalid_root  ${LANG_JAPANESE} \
+#    "Invalid install path: $vim_install_root!$\r$\n\
+#     It should end with $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_JAPANESE} \
+#    "Binary path mismatch!$\r$\n$\r$\n\
+#     Expect the binary path to be $\"$vim_bin_path$\",$\r$\n\
+#     but system indicates the binary path is $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_JAPANESE} \
+#    "Vim is still running on your system.$\r$\n\
+#     Please close all instances of Vim before you continue."
+
+#LangString str_msg_register_ole  ${LANG_JAPANESE} \
+#    "Attempting to register Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_unreg_ole     ${LANG_JAPANESE} \
+#    "Attempting to unregister Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_rm_start      ${LANG_JAPANESE} \
+#    "Uninstalling the following version:"
+
+#LangString str_msg_rm_fail       ${LANG_JAPANESE} \
+#    "Fail to uninstall the following version:"
+
+#LangString str_msg_no_rm_key     ${LANG_JAPANESE} \
+#    "Cannot find uninstaller registry key."
+
+#LangString str_msg_no_rm_reg     ${LANG_JAPANESE} \
+#    "Cannot find uninstaller from registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_JAPANESE} \
+#    "Cannot access uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_JAPANESE} \
+#    "Fail to copy uninstaller to temporary directory."
+
+#LangString str_msg_rm_run_fail   ${LANG_JAPANESE} \
+#    "Fail to run uninstaller."
+
+#LangString str_msg_abort_install ${LANG_JAPANESE} \
+#    "Installer will abort."
+
+LangString str_msg_install_fail  ${LANG_JAPANESE} \
+    "インストールに失敗しました。次はうまくいくことを祈ります。"
+
+LangString str_msg_rm_exe_fail   ${LANG_JAPANESE} \
+    "$0 内の一部のファイルは削除できませんでした!$\r$\n\
+     手動で削除する必要があります。"
+
+#LangString str_msg_rm_root_fail  ${LANG_JAPANESE} \
+#    "WARNING: Cannot remove $\"$vim_install_root$\", it is not empty!"
+
+LangString str_msg_uninstalling  ${LANG_JAPANESE} \
+    "古いバージョンをアンインストールしています..."
+
+LangString str_msg_registering   ${LANG_JAPANESE} \
+    "登録中..."
+
+LangString str_msg_unregistering ${LANG_JAPANESE} \
+    "登録解除中..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_JAPANESE} \
+    "_vimrc の設定を選んでください"
+LangString str_vimrc_page_subtitle ${LANG_JAPANESE} \
+    "拡張やキーボード、マウスの設定を選んでください。"
+
+LangString str_msg_compat_title    ${LANG_JAPANESE} \
+    " Vi / Vim の動作 "
+LangString str_msg_compat_desc     ${LANG_JAPANESE} \
+    "互換性と拡張(&C)"
+LangString str_msg_compat_vi       ${LANG_JAPANESE} \
+    "Vi 互換"
+LangString str_msg_compat_vim      ${LANG_JAPANESE} \
+    "Vim 独自"
+LangString str_msg_compat_defaults ${LANG_JAPANESE} \
+    "Vim 独自と多少の拡張 (defaults.vim を読み込み)"
+LangString str_msg_compat_all      ${LANG_JAPANESE} \
+    "Vim 独自と全ての拡張 (vimrc_example.vim を読み込み) (既定)"
+
+LangString str_msg_keymap_title   ${LANG_JAPANESE} \
+    " マッピング "
+LangString str_msg_keymap_desc    ${LANG_JAPANESE} \
+    "Windows用に一部のキーをリマップする(&R) (例: Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F など)"
+LangString str_msg_keymap_default ${LANG_JAPANESE} \
+    "リマップしない (既定)"
+LangString str_msg_keymap_windows ${LANG_JAPANESE} \
+    "リマップする"
+
+LangString str_msg_mouse_title   ${LANG_JAPANESE} \
+    " マウス "
+LangString str_msg_mouse_desc    ${LANG_JAPANESE} \
+    "右ボタンと左ボタンの動作(&B)"
+LangString str_msg_mouse_default ${LANG_JAPANESE} \
+    "右：ポップアップメニュー、左：ビジュアルモード (既定)"
+LangString str_msg_mouse_windows ${LANG_JAPANESE} \
+    "右：ポップアップメニュー、左：選択モード (Windows)"
+LangString str_msg_mouse_unix    ${LANG_JAPANESE} \
+    "右：選択を拡張、左：ビジュアルモード (Unix)"

nsis/lang/simpchinese.nsi

@@ -0,0 +1,277 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# simpchinese.nsi: Simplified Chinese language strings for gvim NSIS
+# installer.
+#
+# Locale ID    : 2052
+# fileencoding : UTF-8
+# Author       : Guopeng Wen
+
+!insertmacro MUI_LANGUAGE "SimpChinese"
+
+
+# Overwrite the default translation.
+# These string should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_SIMPCHINESE} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_SIMPCHINESE} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_SIMPCHINESE} \
+#    "安装路径 (必须以 vim 结尾)"
+
+LangString str_show_readme          ${LANG_SIMPCHINESE} \
+    "安装完成后显示 README 文件"
+
+# Install types:
+LangString str_type_typical         ${LANG_SIMPCHINESE} \
+    "典型安装"
+
+LangString str_type_minimal         ${LANG_SIMPCHINESE} \
+    "最小安装"
+
+LangString str_type_full            ${LANG_SIMPCHINESE} \
+    "完全安装"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_SIMPCHINESE} \
+    "卸载旧版本"
+LangString str_desc_old_ver         ${LANG_SIMPCHINESE} \
+    "卸载系统上旧版本的 Vim。"
+
+LangString str_section_exe          ${LANG_SIMPCHINESE} \
+    "安装 Vim 图形界面"
+LangString str_desc_exe             ${LANG_SIMPCHINESE} \
+    "安装 Vim 图形界面及脚本。此为必选安装。"
+
+LangString str_section_console      ${LANG_SIMPCHINESE} \
+    "安装 Vim 命令行程序"
+LangString str_desc_console         ${LANG_SIMPCHINESE} \
+    "安装 Vim 命令行程序 (vim.exe)。该程序在命令行窗口中运行。"
+
+LangString str_section_batch        ${LANG_SIMPCHINESE} \
+    "安装批处理文件"
+LangString str_desc_batch           ${LANG_SIMPCHINESE} \
+    "为 Vim 的各种变体创建批处理程序，以便在命令行下运行 Vim。"
+
+LangString str_group_icons          ${LANG_SIMPCHINESE} \
+    "创建 Vim 图标"
+LangString str_desc_icons           ${LANG_SIMPCHINESE} \
+    "为 Vim 创建若干图标，以方便使用 Vim。"
+
+LangString str_section_desktop      ${LANG_SIMPCHINESE} \
+    "在桌面上"
+LangString str_desc_desktop         ${LANG_SIMPCHINESE} \
+    "在桌面上为 Vim 创建若干图标，以方便启动 Vim。"
+
+LangString str_section_start_menu   ${LANG_SIMPCHINESE} \
+    "在启动菜单的程序菜单下"
+LangString str_desc_start_menu      ${LANG_SIMPCHINESE} \
+    "在启动菜单的程序菜单下添加 Vim 组。适用于 Windows 95 及以上版本。"
+
+#LangString str_section_quick_launch ${LANG_SIMPCHINESE} \
+#    "在快速启动启动栏中"
+#LangString str_desc_quick_launch    ${LANG_SIMPCHINESE} \
+#    "在快速启动栏中添加 Vim 图标。"
+
+LangString str_section_edit_with    ${LANG_SIMPCHINESE} \
+    "安装快捷菜单"
+LangString str_desc_edit_with       ${LANG_SIMPCHINESE} \
+    "将 Vim 添加到“打开方式”快捷菜单中。"
+
+#LangString str_section_edit_with32  ${LANG_SIMPCHINESE} \
+#    "32 位版本"
+#LangString str_desc_edit_with32     ${LANG_SIMPCHINESE} \
+#    "将 Vim 添加到 32 位程序的“打开方式”快捷菜单中。"
+
+#LangString str_section_edit_with64  ${LANG_SIMPCHINESE} \
+#    "64 位版本"
+#LangString str_desc_edit_with64     ${LANG_SIMPCHINESE} \
+#    "将 Vim 添加到 64 位程序的“打开方式”快捷菜单中。"
+
+LangString str_section_vim_rc       ${LANG_SIMPCHINESE} \
+    "创建缺省配置文件"
+LangString str_desc_vim_rc          ${LANG_SIMPCHINESE} \
+    "在安装目录下生成缺省的 Vim 配置文件(_vimrc)。\
+     如果该文件已经存在，则略过此项。"
+
+LangString str_group_plugin         ${LANG_SIMPCHINESE} \
+    "创建插件目录"
+LangString str_desc_plugin          ${LANG_SIMPCHINESE} \
+    "创建(空的)插件目录结构。插件目录用于安装 Vim 扩展插件，\
+     只要将文件复制到相关的子目录中即可。"
+
+LangString str_section_plugin_home  ${LANG_SIMPCHINESE} \
+    "私有插件目录"
+LangString str_desc_plugin_home     ${LANG_SIMPCHINESE} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_SIMPCHINESE} \
+    "公共插件目录"
+LangString str_desc_plugin_vim      ${LANG_SIMPCHINESE} \
+    "在 Vim 安装目录下创建(空的)插件目录结构，系统上所有用户都能使用安装在\
+     该目录下的扩展插件。"
+
+LangString str_section_vis_vim      ${LANG_SIMPCHINESE} \
+    "安装 VisVim 插件"
+LangString str_desc_vis_vim         ${LANG_SIMPCHINESE} \
+    "安装用于与微软 Microsoft Visual Studio 进行集成的 VisVim 插件。"
+
+LangString str_section_nls          ${LANG_SIMPCHINESE} \
+    "安装多语言支持"
+LangString str_desc_nls             ${LANG_SIMPCHINESE} \
+    "安装用于多语言支持的文件。"
+
+LangString str_unsection_register   ${LANG_SIMPCHINESE} \
+    "删除 Vim 系统配置"
+LangString str_desc_unregister      ${LANG_SIMPCHINESE} \
+    "删除和 Vim 相关的系统配置。"
+
+LangString str_unsection_exe        ${LANG_SIMPCHINESE} \
+    "删除 Vim 执行文件以及脚本"
+LangString str_desc_rm_exe          ${LANG_SIMPCHINESE} \
+    "删除 Vim 的所有执行文件及脚本。"
+
+LangString str_ungroup_plugin       ${LANG_SIMPCHINESE} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_SIMPCHINESE} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_SIMPCHINESE} \
+    "私有插件目录"
+LangString str_desc_rm_plugin_home  ${LANG_SIMPCHINESE} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_SIMPCHINESE} \
+    "公共插件目录"
+LangString str_desc_rm_plugin_vim   ${LANG_SIMPCHINESE} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_SIMPCHINESE} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_SIMPCHINESE} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_SIMPCHINESE} \
+#    "您的系统上安装了 $vim_old_ver_count 个不同版本的 Vim，$\r$\n\
+#     但本安装程序最多只能处理 ${VIM_MAX_OLD_VER} 个版本。$\r$\n\
+#     请您手工删除一些旧版本以后再运行本安装程序。"
+
+#LangString str_msg_invalid_root  ${LANG_SIMPCHINESE} \
+#    "安装路径“$vim_install_root”无效！$\r$\n\
+#     该路径必须以 vim 结尾。"
+
+#LangString str_msg_bin_mismatch  ${LANG_SIMPCHINESE} \
+#    "Vim 执行程序安装路径异常！$\r$\n$\r$\n\
+#     该版本 Vim 的执行程序安装路径应该是“$vim_bin_path”,$\r$\n\
+#     而系统却指示该路径为“$INSTDIR”。"
+
+#LangString str_msg_vim_running   ${LANG_SIMPCHINESE} \
+#    "您的系统上仍有 Vim 在运行，$\r$\n\
+#     请您在执行后续步骤前退出这些 Vim。"
+
+#LangString str_msg_register_ole  ${LANG_SIMPCHINESE} \
+#    "试图注册 Vim OLE 服务器。请注意无论成功与否都不再显示进一步的信息。"
+
+#LangString str_msg_unreg_ole     ${LANG_SIMPCHINESE} \
+#    "试图注销 Vim OLE 服务器。请注意无论成功与否都不再显示进一步的信息。"
+
+#LangString str_msg_rm_start      ${LANG_SIMPCHINESE} \
+#    "开始卸载以下版本："
+
+#LangString str_msg_rm_fail       ${LANG_SIMPCHINESE} \
+#    "以下版本卸载失败："
+
+#LangString str_msg_no_rm_key     ${LANG_SIMPCHINESE} \
+#    "找不到卸载程序的注册表键。"
+
+#LangString str_msg_no_rm_reg     ${LANG_SIMPCHINESE} \
+#    "在注册表中未找到卸载程序路径。"
+
+#LangString str_msg_no_rm_exe     ${LANG_SIMPCHINESE} \
+#    "找不到卸载程序。"
+
+#LangString str_msg_rm_copy_fail  ${LANG_SIMPCHINESE} \
+#    "无法将卸载程序复制到临时目录。"
+
+#LangString str_msg_rm_run_fail   ${LANG_SIMPCHINESE} \
+#    "执行卸载程序失败。"
+
+#LangString str_msg_abort_install ${LANG_SIMPCHINESE} \
+#    "安装程序将退出。"
+
+LangString str_msg_install_fail  ${LANG_SIMPCHINESE} \
+    "安装失败。祝您下次好运。"
+
+LangString str_msg_rm_exe_fail   ${LANG_SIMPCHINESE} \
+    "目录“$0”下有部分文件删除失败！$\r$\n\
+     您只能手工删除该目录。"
+
+#LangString str_msg_rm_root_fail  ${LANG_SIMPCHINESE} \
+#    "警告：无法删除 Vim 安装目录“$vim_install_root”，\
+#     该目录下仍有其他文件。"
+
+LangString str_msg_uninstalling  ${LANG_SIMPCHINESE} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_SIMPCHINESE} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_SIMPCHINESE} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_SIMPCHINESE} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_SIMPCHINESE} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_SIMPCHINESE} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_SIMPCHINESE} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_SIMPCHINESE} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_SIMPCHINESE} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_SIMPCHINESE} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_SIMPCHINESE} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_SIMPCHINESE} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_SIMPCHINESE} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_SIMPCHINESE} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_SIMPCHINESE} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_SIMPCHINESE} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_SIMPCHINESE} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_SIMPCHINESE} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_SIMPCHINESE} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_SIMPCHINESE} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/lang/tradchinese.nsi

@@ -0,0 +1,278 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# tradchinese.nsi: Traditional Chinese language strings for gvim NSIS
+# installer.
+#
+# Locale ID    : 1028
+# fileencoding : UTF-8
+# Author       : Guopeng Wen
+
+!insertmacro MUI_LANGUAGE "TradChinese"
+
+
+# Overwrite the default translation.
+# These string should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_TRADCHINESE} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_TRADCHINESE} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_TRADCHINESE} \
+#    "安裝資料夾 (必須以 vim 結尾)"
+
+LangString str_show_readme          ${LANG_TRADCHINESE} \
+    "安裝完成後顯示 README 檔案"
+
+# Install types:
+LangString str_type_typical         ${LANG_TRADCHINESE} \
+    "典型安裝"
+
+LangString str_type_minimal         ${LANG_TRADCHINESE} \
+    "最小安裝"
+
+LangString str_type_full            ${LANG_TRADCHINESE} \
+    "完全安裝"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_TRADCHINESE} \
+    "移除舊版本"
+LangString str_desc_old_ver         ${LANG_TRADCHINESE} \
+    "移除閣下電腦上舊版本的 Vim。"
+
+LangString str_section_exe          ${LANG_TRADCHINESE} \
+    "安裝 Vim 圖形界面程式"
+LangString str_desc_exe             ${LANG_TRADCHINESE} \
+    "安裝 Vim 圖形界面程式及腳本。此為必選安裝。"
+
+LangString str_section_console      ${LANG_TRADCHINESE} \
+    "安裝 Vim 命令行程式"
+LangString str_desc_console         ${LANG_TRADCHINESE} \
+    "安裝 Vim 命令行程式 (vim.exe)。該程式在控制臺窗口中運行。"
+
+LangString str_section_batch        ${LANG_TRADCHINESE} \
+    "安裝批次檔案"
+LangString str_desc_batch           ${LANG_TRADCHINESE} \
+    "為 Vim 的各種變體創建批次檔，以便在命令行下啟動 Vim。"
+
+LangString str_group_icons          ${LANG_TRADCHINESE} \
+    "建立 Vim 圖示"
+LangString str_desc_icons           ${LANG_TRADCHINESE} \
+    "建立若干 Vim 圖示，以便于使用 Vim。"
+
+LangString str_section_desktop      ${LANG_TRADCHINESE} \
+    "於桌面"
+LangString str_desc_desktop         ${LANG_TRADCHINESE} \
+    "建立若干 Vim 圖示於桌面上，以方便啟動 Vim。"
+
+LangString str_section_start_menu   ${LANG_TRADCHINESE} \
+    "於「開始」功能表的「程式」集"
+LangString str_desc_start_menu      ${LANG_TRADCHINESE} \
+    "在「開始」功能表的「程式」集中建立 Vim 啟動組。\
+     適用于 Windows 95 及以上版本。"
+
+#LangString str_section_quick_launch ${LANG_TRADCHINESE} \
+#    "於快速啟動列"
+#LangString str_desc_quick_launch    ${LANG_TRADCHINESE} \
+#    "在快速啟動列中建立 Vim 圖示。"
+
+LangString str_section_edit_with    ${LANG_TRADCHINESE} \
+    "安裝快捷選單"
+LangString str_desc_edit_with       ${LANG_TRADCHINESE} \
+    "在「打開方式」快捷選單中添加 Vim 項。"
+
+#LangString str_section_edit_with32  ${LANG_TRADCHINESE} \
+#    "32 位元版本"
+#LangString str_desc_edit_with32     ${LANG_TRADCHINESE} \
+#    "在 32 位元程式的「打開方式」快捷選單中添加 Vim 項。"
+
+#LangString str_section_edit_with64  ${LANG_TRADCHINESE} \
+#    "64 位元版本"
+#LangString str_desc_edit_with64     ${LANG_TRADCHINESE} \
+#    "在 64 位元程式的「打開方式」快捷選單中添加 Vim 項。"
+
+LangString str_section_vim_rc       ${LANG_TRADCHINESE} \
+    "建立默認設定檔"
+LangString str_desc_vim_rc          ${LANG_TRADCHINESE} \
+    "在安裝資料夾下建立默認的 Vim 設定檔(_vimrc)。\
+     若該設定檔已經存在，則略過此項。"
+
+LangString str_group_plugin         ${LANG_TRADCHINESE} \
+    "建立插件資料夾"
+LangString str_desc_plugin          ${LANG_TRADCHINESE} \
+    "建立(空的)插件資料夾結構。插件資料夾用于安裝 Vim 的擴展插件，\
+     只要將檔案復制到相關的子資料夾中即可。"
+
+LangString str_section_plugin_home  ${LANG_TRADCHINESE} \
+    "建立插件資料夾"
+LangString str_desc_plugin_home     ${LANG_TRADCHINESE} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_TRADCHINESE} \
+    "建立共享插件資料夾"
+LangString str_desc_plugin_vim      ${LANG_TRADCHINESE} \
+    "在 Vim 安裝資料夾下建立(空的)插件資料夾結構，電腦上所有用戶都能使用安裝\
+     在該資料夾里的擴展插件。"
+
+LangString str_section_vis_vim      ${LANG_TRADCHINESE} \
+    "安裝 VisVim 插件"
+LangString str_desc_vis_vim         ${LANG_TRADCHINESE} \
+    "VisVim 是用于與微軟 Microsoft Visual Studio 軟體進行整合的插件。"
+
+LangString str_section_nls          ${LANG_TRADCHINESE} \
+    "安裝本地語言支持"
+LangString str_desc_nls             ${LANG_TRADCHINESE} \
+    "安裝用于支持本地語言的檔案。"
+
+LangString str_unsection_register   ${LANG_TRADCHINESE} \
+    "移除 Vim 系統設定"
+LangString str_desc_unregister      ${LANG_TRADCHINESE} \
+    "移除與 Vim 相關的系統設定。"
+
+LangString str_unsection_exe        ${LANG_TRADCHINESE} \
+    "移除 Vim 程式及腳本"
+LangString str_desc_rm_exe          ${LANG_TRADCHINESE} \
+    "移除所有的 Vim 程式及腳本。"
+
+LangString str_ungroup_plugin       ${LANG_TRADCHINESE} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_TRADCHINESE} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_TRADCHINESE} \
+    "Private"
+LangString str_desc_rm_plugin_home  ${LANG_TRADCHINESE} \
+    "Remove the vimfiles directory in HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_TRADCHINESE} \
+    "Shared"
+LangString str_desc_rm_plugin_vim   ${LANG_TRADCHINESE} \
+    "Remove the vimfiles directory in Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_TRADCHINESE} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_TRADCHINESE} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_TRADCHINESE} \
+#    "閣下的電腦上安裝了 $vim_old_ver_count 個不同版本的 Vim，$\r$\n\
+#     但是本安裝程式最多只能處理 ${VIM_MAX_OLD_VER} 個版本。$\r$\n\
+#     煩請閣下手工移除一些版本以后再運行本安裝程式。"
+
+#LangString str_msg_invalid_root  ${LANG_TRADCHINESE} \
+#    "安裝資料夾「$vim_install_root」無效！$\r$\n\
+#     該資料夾必須以「vim」結尾。"
+
+#LangString str_msg_bin_mismatch  ${LANG_TRADCHINESE} \
+#    "Vim 執行程式安裝路徑異常！$\r$\n$\r$\n\
+#     該版本 Vim 的執行程式安裝路徑應該是「$vim_bin_path」,$\r$\n\
+#     而系統卻指示該路徑為「$INSTDIR」。"
+
+#LangString str_msg_vim_running   ${LANG_TRADCHINESE} \
+#    "閣下的電腦上尚有正在運行之 Vim，$\r$\n\
+#     煩請閣下在執行后續步驟前將其全部退出。"
+
+#LangString str_msg_register_ole  ${LANG_TRADCHINESE} \
+#    "試圖注冊 Vim OLE 伺服程式。請注意不論成功與否都不再顯示進一步的信息。"
+
+#LangString str_msg_unreg_ole     ${LANG_TRADCHINESE} \
+#    "試圖注銷 Vim OLE 伺服程式。請注意不論成功與否都不再顯示進一步的信息。"
+
+#LangString str_msg_rm_start      ${LANG_TRADCHINESE} \
+#    "正移除如下版本："
+
+#LangString str_msg_rm_fail       ${LANG_TRADCHINESE} \
+#    "以下版本移除失敗："
+
+#LangString str_msg_no_rm_key     ${LANG_TRADCHINESE} \
+#    "找不到反安裝程式的登錄檔入口。"
+
+#LangString str_msg_no_rm_reg     ${LANG_TRADCHINESE} \
+#    "在登錄檔中未找到反安裝程式路徑。"
+
+#LangString str_msg_no_rm_exe     ${LANG_TRADCHINESE} \
+#    "找不到反安裝程式。"
+
+#LangString str_msg_rm_copy_fail  ${LANG_TRADCHINESE} \
+#    "無法將法將反安裝程式复制到臨時目錄。"
+
+#LangString str_msg_rm_run_fail   ${LANG_TRADCHINESE} \
+#    "執行反安裝程式失敗。"
+
+#LangString str_msg_abort_install ${LANG_TRADCHINESE} \
+#    "安裝程式將退出。"
+
+LangString str_msg_install_fail  ${LANG_TRADCHINESE} \
+    "安裝失敗。預祝下次好運。"
+
+LangString str_msg_rm_exe_fail   ${LANG_TRADCHINESE} \
+    "資料夾「$0」下有部分檔案未能移除！$\r$\n\
+     閣下只能手工移除該資料夾。"
+
+#LangString str_msg_rm_root_fail  ${LANG_TRADCHINESE} \
+#    "警告：無法刪除 Vim 安裝資料夾「$vim_install_root」，\
+#     該資料夾下仍有其他檔案。"
+
+LangString str_msg_uninstalling  ${LANG_TRADCHINESE} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_TRADCHINESE} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_TRADCHINESE} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_TRADCHINESE} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_TRADCHINESE} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_TRADCHINESE} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_TRADCHINESE} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_TRADCHINESE} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_TRADCHINESE} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_TRADCHINESE} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_TRADCHINESE} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_TRADCHINESE} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_TRADCHINESE} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_TRADCHINESE} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_TRADCHINESE} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_TRADCHINESE} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_TRADCHINESE} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_TRADCHINESE} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_TRADCHINESE} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_TRADCHINESE} \
+    "Right: extends selection, Left: visual mode (Unix)"

runtime/autoload/RstFold.vim

@@ -0,0 +1,48 @@
+" Author: Antony Lee <anntzer.lee@gmail.com>
+" Description: Helper functions for reStructuredText syntax folding
+" Last Modified: 2018-01-07
+
+function s:CacheRstFold()
+  let closure = {'header_types': {}, 'max_level': 0, 'levels': {}}
+  function closure.Process(match) dict
+    let curline = getcurpos()[1]
+    if has_key(self.levels, curline - 1)
+      " For over+under-lined headers, the regex will match both at the
+      " overline and at the title itself; in that case, skip the second match.
+      return
+    endif
+    let lines = split(a:match, '\n')
+    let key = repeat(lines[-1][0], len(lines))
+    if !has_key(self.header_types, key)
+      let self.max_level += 1
+      let self.header_types[key] = self.max_level
+    endif
+    let self.levels[curline] = self.header_types[key]
+  endfunction
+  let save_cursor = getcurpos()
+  silent keeppatterns %s/\v^%(%(([=`:.'"~^_*+#-])\1+\n)?.{1,2}\n([=`:.'"~^_*+#-])\2+)|%(%(([=`:.''"~^_*+#-])\3{2,}\n)?.{3,}\n([=`:.''"~^_*+#-])\4{2,})$/\=closure.Process(submatch(0))/gn
+  call setpos('.', save_cursor)
+  let b:RstFoldCache = closure.levels
+endfunction
+
+function RstFold#GetRstFold()
+  if !has_key(b:, 'RstFoldCache')
+    call s:CacheRstFold()
+  endif
+  if has_key(b:RstFoldCache, v:lnum)
+    return '>' . b:RstFoldCache[v:lnum]
+  else
+    return '='
+  endif
+endfunction
+
+function RstFold#GetRstFoldText()
+  if !has_key(b:, 'RstFoldCache')
+    call s:CacheRstFold()
+  endif
+  let indent = repeat('  ', b:RstFoldCache[v:foldstart] - 1)
+  let thisline = getline(v:foldstart)
+  " For over+under-lined headers, skip the overline.
+  let text = thisline =~ '^\([=`:.''"~^_*+#-]\)\1\+$' ? getline(v:foldstart + 1) : thisline
+  return indent . text
+endfunction

runtime/autoload/ccomplete.vim

@@ -1,7 +1,7 @@
 " Vim completion script
 " Language:	C
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2012 Jun 20
+" Last Change:	2018 Aug 20
 
 let s:cpo_save = &cpo
 set cpo&vim
@@ -72,8 +72,10 @@ function! ccomplete#Complete(findstart, base)
   " Split item in words, keep empty word after "." or "->".
   " "aa" -> ['aa'], "aa." -> ['aa', ''], "aa.bb" -> ['aa', 'bb'], etc.
   " We can't use split, because we need to skip nested [...].
+  " "aa[...]" -> ['aa', '[...]'], "aa.bb[...]" -> ['aa', 'bb', '[...]'], etc.
   let items = []
   let s = 0
+  let arrays = 0
   while 1
     let e = match(base, '\.\|->\|\[', s)
     if e < 0
@@ -107,6 +109,7 @@ function! ccomplete#Complete(findstart, base)
       endwhile
       let e += 1
       call add(items, strpart(base, s, e - s))
+      let arrays += 1
       let s = e
     endif
   endwhile
@@ -161,15 +164,26 @@ function! ccomplete#Complete(findstart, base)
 	endif
       endif
       let res = [{'match': match, 'tagline' : '', 'kind' : kind, 'info' : line}]
+    elseif len(items) == arrays + 1
+      " Completing one word and it's a local array variable: build tagline
+      " from declaration line
+      let match = items[0]
+      let kind = 'v'
+      let tagline = "\t/^" . line . '$/'
+      let res = [{'match': match, 'tagline' : tagline, 'kind' : kind, 'info' : line}]
     else
       " Completing "var.", "var.something", etc.
       let res = s:Nextitem(strpart(line, 0, col), items[1:], 0, 1)
     endif
   endif
 
-  if len(items) == 1
+  if len(items) == 1 || len(items) == arrays + 1
     " Only one part, no "." or "->": complete from tags file.
-    let tags = taglist('^' . base)
+    if len(items) == 1
+      let tags = taglist('^' . base)
+    else
+      let tags = taglist('^' . items[0] . '$')
+    endif
 
     " Remove members, these can't appear without something in front.
     call filter(tags, 'has_key(v:val, "kind") ? v:val["kind"] != "m" : 1')
@@ -516,11 +530,24 @@ function! s:StructMembers(typename, items, all)
     endif
   endif
 
+  " Skip over [...] items
+  let idx = 0
+  while 1
+    if idx >= len(a:items)
+      let target = ''		" No further items, matching all members
+      break
+    endif
+    if a:items[idx][0] != '['
+      let target = a:items[idx]
+      break
+    endif
+    let idx += 1
+  endwhile
   " Put matching members in matches[].
   let matches = []
   for l in qflist
     let memb = matchstr(l['text'], '[^\t]*')
-    if memb =~ '^' . a:items[0]
+    if memb =~ '^' . target
       " Skip matches local to another file.
       if match(l['text'], "\tfile:") < 0 || bufnr('%') == bufnr(matchstr(l['text'], '\t\zs[^\t]*'))
 	let item = {'match': memb, 'tagline': l['text']}
@@ -540,8 +567,8 @@ function! s:StructMembers(typename, items, all)
   endfor
 
   if len(matches) > 0
-    " Skip over [...] items
-    let idx = 1
+    " Skip over next [...] items
+    let idx += 1
     while 1
       if idx >= len(a:items)
 	return matches		" No further items, return the result.

runtime/autoload/dist/ft.vim

@@ -126,7 +126,7 @@ endfunc
 " This function checks if one of the first ten lines start with a '@'.  In
 " that case it is probably a change file.
 " If the first line starts with # or ! it's probably a ch file.
-" If a line has "main", "include", "//" ir "/*" it's probably ch.
+" If a line has "main", "include", "//" or "/*" it's probably ch.
 " Otherwise CHILL is assumed.
 func dist#ft#FTchange()
   let lnum = 1
@@ -632,7 +632,7 @@ endfunc
 " Choose context, plaintex, or tex (LaTeX) based on these rules:
 " 1. Check the first line of the file for "%&<format>".
 " 2. Check the first 1000 non-comment lines for LaTeX or ConTeXt keywords.
-" 3. Default to "latex" or to g:tex_flavor, can be set in user's vimrc.
+" 3. Default to "plain" or to g:tex_flavor, can be set in user's vimrc.
 func dist#ft#FTtex()
   let firstline = getline(1)
   if firstline =~ '^%&\s*\a\+'

runtime/autoload/phpcomplete.vim

@@ -3,7 +3,7 @@
 " Maintainer:	Dávid Szabó ( complex857 AT gmail DOT com )
 " Previous Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
 " URL: https://github.com/shawncplus/phpcomplete.vim
-" Last Change:  2016 Oct 10
+" Last Change:  2018 Oct 10
 "
 "	OPTIONS:
 "
@@ -146,6 +146,8 @@ function! phpcomplete#CompletePHP(findstart, base) " {{{
 	end
 
 	try
+		let eventignore = &eventignore
+		let &eventignore = 'all'
 		let winheight = winheight(0)
 		let winnr = winnr()
 
@@ -216,6 +218,7 @@ function! phpcomplete#CompletePHP(findstart, base) " {{{
 		endif
 	finally
 		silent! exec winnr.'resize '.winheight
+		let &eventignore = eventignore
 	endtry
 endfunction
 " }}}
@@ -1393,23 +1396,28 @@ function! phpcomplete#GetCallChainReturnType(classname_candidate, class_candidat
 			for classstructure in classcontents
 				let docblock_target_pattern = 'function\s\+&\?'.method.'\>\|\(public\|private\|protected\|var\).\+\$'.method.'\>\|@property.\+\$'.method.'\>'
 				let doc_str = phpcomplete#GetDocBlock(split(classstructure.content, '\n'), docblock_target_pattern)
-				if doc_str != ''
+				let return_type_hint = phpcomplete#GetFunctionReturnTypeHint(split(classstructure.content, '\n'), 'function\s\+&\?'.method.'\>')
+				if doc_str != '' || return_type_hint != ''
 					break
 				endif
 			endfor
-			if doc_str != ''
+			if doc_str != '' || return_type_hint != ''
 				let docblock = phpcomplete#ParseDocBlock(doc_str)
-				if has_key(docblock.return, 'type') || has_key(docblock.var, 'type') || len(docblock.properties) > 0
-					let type = has_key(docblock.return, 'type') ? docblock.return.type : has_key(docblock.var, 'type') ? docblock.var.type : ''
+				if has_key(docblock.return, 'type') || has_key(docblock.var, 'type') || len(docblock.properties) > 0 || return_type_hint != ''
+					if return_type_hint == ''
+						let type = has_key(docblock.return, 'type') ? docblock.return.type : has_key(docblock.var, 'type') ? docblock.var.type : ''
 
-					if type == ''
-						for property in docblock.properties
-							if property.description =~? method
-								let type = property.type
-								break
-							endif
-						endfor
-					endif
+						if type == ''
+							for property in docblock.properties
+								if property.description =~? method
+									let type = property.type
+									break
+								endif
+							endfor
+						endif
+					else
+						let type = return_type_hint
+					end
 
 					" there's a namespace in the type, threat the type as FQCN
 					if type =~ '\\'
@@ -1483,7 +1491,7 @@ function! phpcomplete#GetMethodStack(line) " {{{
 			continue
 		endif
 
-		" if it's looks like a string
+		" if it looks like a string
 		if current_char == "'" || current_char == '"'
 			" and it is not escaped
 			if prev_char != '\' || (prev_char == '\' && prev_prev_char == '\')
@@ -1587,9 +1595,11 @@ function! phpcomplete#GetClassName(start_line, context, current_namespace, impor
 		elseif function_file != '' && filereadable(function_file)
 			let file_lines = readfile(function_file)
 			let docblock_str = phpcomplete#GetDocBlock(file_lines, 'function\s*&\?\<'.function_name.'\>')
+			let return_type_hint = phpcomplete#GetFunctionReturnTypeHint(file_lines, 'function\s*&\?'.function_name.'\>')
 			let docblock = phpcomplete#ParseDocBlock(docblock_str)
-			if has_key(docblock.return, 'type')
-				let classname_candidate = docblock.return.type
+			let type = has_key(docblock.return, 'type') ? docblock.return.type : return_type_hint
+			if type != ''
+				let classname_candidate = type
 				let [class_candidate_namespace, function_imports] = phpcomplete#GetCurrentNameSpace(file_lines)
 				" try to expand the classname of the returned type with the context got from the function's source file
 
@@ -1821,9 +1831,11 @@ function! phpcomplete#GetClassName(start_line, context, current_namespace, impor
 				elseif function_file != '' && filereadable(function_file)
 					let file_lines = readfile(function_file)
 					let docblock_str = phpcomplete#GetDocBlock(file_lines, 'function\s*&\?\<'.function_name.'\>')
+					let return_type_hint = phpcomplete#GetFunctionReturnTypeHint(file_lines, 'function\s*&\?'.function_name.'\>')
 					let docblock = phpcomplete#ParseDocBlock(docblock_str)
-					if has_key(docblock.return, 'type')
-						let classname_candidate = docblock.return.type
+					let type = has_key(docblock.return, 'type') ? docblock.return.type : return_type_hint
+					if type != ''
+						let classname_candidate = type
 						let [class_candidate_namespace, function_imports] = phpcomplete#GetCurrentNameSpace(file_lines)
 						" try to expand the classname of the returned type with the context got from the function's source file
 						let [classname_candidate, class_candidate_namespace] = phpcomplete#ExpandClassName(classname_candidate, class_candidate_namespace, function_imports)
@@ -2413,6 +2425,44 @@ function! phpcomplete#ParseDocBlock(docblock) " {{{
 endfunction
 " }}}
 
+function! phpcomplete#GetFunctionReturnTypeHint(sccontent, search)
+	let i = 0
+	let l = 0
+	let function_line_start = -1
+	let function_line_end = -1
+	let sccontent_len = len(a:sccontent)
+	let return_type = ''
+
+	while (i < sccontent_len)
+		let line = a:sccontent[i]
+		" search for a function declaration
+		if line =~? a:search
+			let l = i
+			let function_line_start = i
+			" now search for the first { where the function body starts
+			while l < sccontent_len
+				let line = a:sccontent[l]
+				if line =~? '\V{'
+					let function_line_end = l
+					break
+				endif
+				let l += 1
+			endwhile
+			break
+		endif
+		let i += 1
+	endwhile
+
+	" now grab the lines that holds the function declaration line
+	if function_line_start != -1 && function_line_end != -1
+		let function_line = join(a:sccontent[function_line_start :function_line_end], " ")
+		let class_name_pattern = '[a-zA-Z_\x7f-\xff\\][a-zA-Z_0-9\x7f-\xff\\]*'
+		let return_type = matchstr(function_line, '\c\s*:\s*\zs'.class_name_pattern.'\ze\s*{')
+	endif
+	return return_type
+
+endfunction
+
 function! phpcomplete#GetTypeFromDocBlockParam(docblock_type) " {{{
 	if a:docblock_type !~ '|'
 		return a:docblock_type
@@ -2572,7 +2622,7 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 			" find kind flags from tags or built in methods for the objects we extracted
 			" they can be either classes, interfaces or namespaces, no other thing is importable in php
 			for [key, import] in items(imports)
-				" if theres a \ in the name we have it's definetly not a built in thing, look for tags
+				" if theres a \ in the name we have it's definitely not a built in thing, look for tags
 				if import.name =~ '\\'
 					let patched_ctags_detected = 0
 					let [classname, namespace_for_classes] = phpcomplete#ExpandClassName(import.name, '\', {})

runtime/autoload/spellfile.vim

@@ -22,6 +22,7 @@ function! spellfile#LoadFile(lang)
     endif
     return
   endif
+  let lang = tolower(a:lang)
 
   " If the URL changes we try all files again.
   if s:spellfile_URL != g:spellfile_URL
@@ -30,13 +31,13 @@ function! spellfile#LoadFile(lang)
   endif
 
   " I will say this only once!
-  if has_key(s:donedict, a:lang . &enc)
+  if has_key(s:donedict, lang . &enc)
     if &verbose
       echomsg 'spellfile#LoadFile(): Tried this language/encoding before.'
     endif
     return
   endif
-  let s:donedict[a:lang . &enc] = 1
+  let s:donedict[lang . &enc] = 1
 
   " Find spell directories we can write in.
   let [dirlist, dirchoices] = spellfile#GetDirChoices()
@@ -57,14 +58,14 @@ function! spellfile#LoadFile(lang)
     endif
   endif
 
-  let msg = 'Cannot find spell file for "' . a:lang . '" in ' . &enc
+  let msg = 'Cannot find spell file for "' . lang . '" in ' . &enc
   let msg .= "\nDo you want me to try downloading it?"
   if confirm(msg, "&Yes\n&No", 2) == 1
     let enc = &encoding
     if enc == 'iso-8859-15'
       let enc = 'latin1'
     endif
-    let fname = a:lang . '.' . enc . '.spl'
+    let fname = lang . '.' . enc . '.spl'
 
     " Split the window, read the file into a new buffer.
     " Remember the buffer number, we check it below.
@@ -95,7 +96,7 @@ function! spellfile#LoadFile(lang)
 	let newbufnr = winbufnr(0)
       endif
 
-      let fname = a:lang . '.ascii.spl'
+      let fname = lang . '.ascii.spl'
       echo 'Could not find it, trying ' . fname . '...'
       call spellfile#Nread(fname)
       if getline(2) !~ 'VIMspell'

runtime/autoload/tar.vim

@@ -152,10 +152,12 @@ fun! tar#Browse(tarfile)
    " assuming cygwin
    let tarfile=substitute(system("cygpath -u ".shellescape(tarfile,0)),'\n$','','e')
   endif
+
   let curlast= line("$")
   if tarfile =~# '\.\(gz\|tgz\)$'
+    let gzip_command = s:get_gzip_command(tarfile)
 "   call Decho("1: exe silent r! gzip -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - ")
-   exe "sil! r! gzip -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
+   exe "sil! r! " . gzip_command . " -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
   elseif tarfile =~# '\.lrp'
 "   call Decho("2: exe silent r! cat -- ".shellescape(tarfile,1)."|gzip -d -c -|".g:tar_cmd." -".g:tar_browseoptions." - ")
    exe "sil! r! cat -- ".shellescape(tarfile,1)."|gzip -d -c -|".g:tar_cmd." -".g:tar_browseoptions." - "
@@ -287,12 +289,14 @@ fun! tar#Read(fname,mode)
   else
    let tar_secure= " "
   endif
+
   if tarfile =~# '\.bz2$'
 "   call Decho("7: exe silent r! bzip2 -d -c ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp)
    exe "sil! r! bzip2 -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
   elseif tarfile =~# '\.\(gz\|tgz\)$'
+    let gzip_command = s:get_gzip_command(tarfile)
 "   call Decho("5: exe silent r! gzip -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd.' -'.g:tar_readoptions.' - '.tar_secure.shellescape(fname,1))
-   exe "sil! r! gzip -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
+   exe "sil! r! " . gzip_command . " -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
   elseif tarfile =~# '\.lrp$'
 "   call Decho("6: exe silent r! cat ".shellescape(tarfile,1)." | gzip -d -c - | ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp)
    exe "sil! r! cat -- ".shellescape(tarfile,1)." | gzip -d -c - | ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
@@ -389,6 +393,8 @@ fun! tar#Write(fname)
   let tarfile = substitute(b:tarfile,'tarfile:\(.\{-}\)::.*$','\1','')
   let fname   = substitute(b:tarfile,'tarfile:.\{-}::\(.*\)$','\1','')
 
+  let gzip_command = s:get_gzip_command(tarfile)
+
   " handle compressed archives
   if tarfile =~# '\.bz2'
    call system("bzip2 -d -- ".shellescape(tarfile,0))
@@ -396,12 +402,12 @@ fun! tar#Write(fname)
    let compress= "bzip2 -- ".shellescape(tarfile,0)
 "   call Decho("compress<".compress.">")
   elseif tarfile =~# '\.gz'
-   call system("gzip -d -- ".shellescape(tarfile,0))
+   call system(gzip_command . " -d -- ".shellescape(tarfile,0))
    let tarfile = substitute(tarfile,'\.gz','','e')
    let compress= "gzip -- ".shellescape(tarfile,0)
 "   call Decho("compress<".compress.">")
   elseif tarfile =~# '\.tgz'
-   call system("gzip -d -- ".shellescape(tarfile,0))
+   call system(gzip_command . " -d -- ".shellescape(tarfile,0))
    let tarfile = substitute(tarfile,'\.tgz','.tar','e')
    let compress= "gzip -- ".shellescape(tarfile,0)
    let tgz     = 1
@@ -581,7 +587,10 @@ fun! tar#Vimuntar(...)
 
   " if necessary, decompress the tarball; then, extract it
   if tartail =~ '\.tgz'
-   if executable("gunzip")
+   let gzip_command = s:get_gzip_command(tarfile)
+   if executable(gzip_command)
+    silent exe "!" . gzip_command . " -d ".shellescape(tartail)
+   elseif executable("gunzip")
     silent exe "!gunzip ".shellescape(tartail)
    elseif executable("gzip")
     silent exe "!gzip -d ".shellescape(tartail)
@@ -619,6 +628,28 @@ fun! tar#Vimuntar(...)
 "  call Dret("tar#Vimuntar")
 endfun
 
+func s:get_gzip_command(file)
+  " Try using the "file" command to get the actual compression type, since
+  " there is no standard way for the naming: ".tgz", ".tbz", ".txz", etc.
+  " If the "file" command doesn't work fall back to just using the file name.
+  if a:file =~# 'z$'
+    let filetype = system('file ' . a:file)
+    if filetype =~ 'bzip2 compressed' && executable('bzip2')
+      return 'bzip2'
+    endif
+    if filetype =~ 'XZ compressed' && executable('xz')
+      return 'xz'
+    endif
+  endif
+  if a:file =~# 'bz2$'
+    return 'bzip2'
+  endif
+  if a:file =~# 'xz$'
+    return 'xz'
+  endif
+  return 'gzip'
+endfunc
+
 " =====================================================================
 " Modelines And Restoration: {{{1
 let &cpo= s:keepcpo

runtime/autoload/tohtml.vim

@@ -1,6 +1,6 @@
 " Vim autoload file for the tohtml plugin.
 " Maintainer: Ben Fritz <fritzophrenic@gmail.com>
-" Last Change: 2013 Sep 03
+" Last Change: 2018 Nov 11
 "
 " Additional contributors:
 "
@@ -544,12 +544,16 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     " add required javascript in reverse order so we can just call append again
     " and again without adjusting {{{
 
-    " insert script closing tag
-    call append(style_start, [
-	  \ '',
-	  \ s:settings.use_xhtml ? '//]]>' : '-->',
-	  \ "</script>"
-	  \ ])
+    let s:uses_script = s:settings.dynamic_folds || s:settings.line_ids || !empty(s:settings.prevent_copy)
+
+    " insert script closing tag if needed
+    if s:uses_script
+      call append(style_start, [
+	    \ '',
+	    \ s:settings.use_xhtml ? '//]]>' : '-->',
+	    \ "</script>"
+	    \ ])
+    endif
 
     " insert script which corrects the size of small input elements in
     " prevent_copy mode. See 2html.vim for details on why this is needed and how
@@ -575,55 +579,61 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ '}'
 	    \ ])
     endif
-    "
+
     " insert javascript to get IDs from line numbers, and to open a fold before
     " jumping to any lines contained therein
-    call append(style_start, [
-	  \ "  /* Always jump to new location even if the line was hidden inside a fold, or",
-	  \ "   * we corrected the raw number to a line ID.",
-	  \ "   */",
-	  \ "  if (lineElem) {",
-	  \ "    lineElem.scrollIntoView(true);",
-	  \ "  }",
-	  \ "  return true;",
-	  \ "}",
-	  \ "if ('onhashchange' in window) {",
-	  \ "  window.onhashchange = JumpToLine;",
-	  \ "}"
-	  \ ])
-    if s:settings.dynamic_folds
+    if s:settings.line_ids
+      call append(style_start, [
+	    \ "  /* Always jump to new location even if the line was hidden inside a fold, or",
+	    \ "   * we corrected the raw number to a line ID.",
+	    \ "   */",
+	    \ "  if (lineElem) {",
+	    \ "    lineElem.scrollIntoView(true);",
+	    \ "  }",
+	    \ "  return true;",
+	    \ "}",
+	    \ "if ('onhashchange' in window) {",
+	    \ "  window.onhashchange = JumpToLine;",
+	    \ "}"
+	    \ ])
+
+      if s:settings.dynamic_folds
+	call append(style_start, [
+	      \ "",
+	      \ "  /* navigate upwards in the DOM tree to open all folds containing the line */",
+	      \ "  var node = lineElem;",
+	      \ "  while (node && node.id != 'vimCodeElement".s:settings.id_suffix."')",
+	      \ "  {",
+	      \ "    if (node.className == 'closed-fold')",
+	      \ "    {",
+	      \ "      /* toggle open the fold ID (remove window ID) */",
+	      \ "      toggleFold(node.id.substr(4));",
+	      \ "    }",
+	      \ "    node = node.parentNode;",
+	      \ "  }",
+	      \ ])
+      endif
+    endif
+
+    if s:settings.line_ids
       call append(style_start, [
 	    \ "",
-	    \ "  /* navigate upwards in the DOM tree to open all folds containing the line */",
-	    \ "  var node = lineElem;",
-	    \ "  while (node && node.id != 'vimCodeElement".s:settings.id_suffix."')",
-	    \ "  {",
-	    \ "    if (node.className == 'closed-fold')",
-	    \ "    {",
-	    \ "      /* toggle open the fold ID (remove window ID) */",
-	    \ "      toggleFold(node.id.substr(4));",
-	    \ "    }",
-	    \ "    node = node.parentNode;",
+	    \ "/* function to open any folds containing a jumped-to line before jumping to it */",
+	    \ "function JumpToLine()",
+	    \ "{",
+	    \ "  var lineNum;",
+	    \ "  lineNum = window.location.hash;",
+	    \ "  lineNum = lineNum.substr(1); /* strip off '#' */",
+	    \ "",
+	    \ "  if (lineNum.indexOf('L') == -1) {",
+	    \ "    lineNum = 'L'+lineNum;",
 	    \ "  }",
+	    \ "  if (lineNum.indexOf('W') == -1) {",
+	    \ "    lineNum = 'W1'+lineNum;",
+	    \ "  }",
+	    \ "  var lineElem = document.getElementById(lineNum);"
 	    \ ])
     endif
-    call append(style_start, [
-	  \ "",
-	  \ "/* function to open any folds containing a jumped-to line before jumping to it */",
-	  \ "function JumpToLine()",
-	  \ "{",
-	  \ "  var lineNum;",
-	  \ "  lineNum = window.location.hash;",
-	  \ "  lineNum = lineNum.substr(1); /* strip off '#' */",
-	  \ "",
-	  \ "  if (lineNum.indexOf('L') == -1) {",
-	  \ "    lineNum = 'L'+lineNum;",
-	  \ "  }",
-	  \ "  if (lineNum.indexOf('W') == -1) {",
-	  \ "    lineNum = 'W1'+lineNum;",
-	  \ "  }",
-	  \ "  lineElem = document.getElementById(lineNum);"
-	  \ ])
 
     " Insert javascript to toggle matching folds open and closed in all windows,
     " if dynamic folding is active.
@@ -648,11 +658,13 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ ])
     endif
 
-    " insert script tag; javascript is always needed for the line number
-    " normalization for URL hashes
-    call append(style_start, [
-	  \ "<script type='text/javascript'>",
-	  \ s:settings.use_xhtml ? '//<![CDATA[' : "<!--"])
+    if s:uses_script
+      " insert script tag; javascript is always needed for the line number
+      " normalization for URL hashes
+      call append(style_start, [
+	    \ "<script type='text/javascript'>",
+	    \ s:settings.use_xhtml ? '//<![CDATA[' : "<!--"])
+    endif
 
     " Insert styles from all the generated html documents and additional styles
     " for the table-based layout of the side-by-side diff. The diff should take
@@ -767,7 +779,7 @@ func! tohtml#GetUserSettings() "{{{
     if user_settings.no_pre == 0
       call tohtml#GetOption(user_settings,
 	    \ 'expand_tabs',
-	    \ &expandtab || &ts != 8 || user_settings.number_lines ||
+	    \ &expandtab || &ts != 8 || &vts != '' || user_settings.number_lines ||
 	    \   (user_settings.dynamic_folds && !user_settings.no_foldcolumn))
     else
       let user_settings.expand_tabs = 1

runtime/autoload/xmlformat.vim

@@ -1,10 +1,9 @@
 " Vim plugin for formatting XML
-" Last Change: Thu, 22 May 2018 21:26:55 +0100
-" Version: 0.1
-" Author: Christian Brabandt <cb@256bit.org>
-" Script:  http://www.vim.org/scripts/script.php?script_id=
-" License: VIM License
-" GetLatestVimScripts: ???? 18 :AutoInstall: xmlformat.vim
+" Last Change: Thu, 07 Dec 2018
+"     Version: 0.1
+"      Author: Christian Brabandt <cb@256bit.org>
+"  Repository: https://github.com/chrisbra/vim-xml-ftplugin
+"     License: VIM License
 " Documentation: see :h xmlformat.txt (TODO!)
 " ---------------------------------------------------------------------
 " Load Once: {{{1
@@ -86,7 +85,11 @@ func! s:Trim(item)
 endfunc
 " Check if tag is a new opening tag <tag> {{{1
 func! s:StartTag(tag)
-  return a:tag =~? '^\s*<[^/?]'
+  let is_comment = s:IsComment(a:tag)
+  return a:tag =~? '^\s*<[^/?]' && !is_comment
+endfunc
+func! s:IsComment(tag)
+  return a:tag =~? '<!--'
 endfunc
 " Remove one level of indentation {{{1
 func! s:DecreaseIndent()

runtime/compiler/stack.vim

@@ -0,0 +1,37 @@
+" Vim compiler file
+" Compiler:         Haskell Stack
+" Maintainer:       Daniel Campoverde <alx@sillybytes.net>
+" Latest Revision:  2018-08-27
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "stack"
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+
+CompilerSet errorformat=
+    \%-G%.%#:\ build\ %.%#,
+    \%-G%.%#:\ configure\ %.%#,
+    \%-G[%.%#]%.%#,
+    \%-G%.%#preprocessing\ %.%#,
+    \%-G%.%#configuring\ %.%#,
+    \%-G%.%#building\ %.%#,
+    \%-G%.%#linking\ %.%#,
+    \%-G%.%#installing\ %.%#,
+    \%-G%.%#registering\ %.%#,
+    \%-G%.%#:\ copy/register%.%#,
+    \%-G%.%#process\ exited\ %.%#,
+    \%-G%.%#--builddir=%.%#,
+    \%-G--%.%#,
+    \%-G%.%#\|%.%#,
+    \%E%f:%l:%c:\ error:,%+Z\ \ \ \ %m,
+    \%E%f:%l:%c:\ error:\ %m,%-Z,
+    \%W%f:%l:%c:\ warning:,%+Z\ \ \ \ %m,
+    \%W%f:%l:%c:\ warning:\ %m,%-Z,
+
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/delmenu.vim

@@ -5,6 +5,7 @@
 " Last Change:	2001 May 27
 
 aunmenu *
+tlunmenu *
 
 silent! unlet did_install_default_menus
 silent! unlet did_install_syntax_menu

runtime/doc/Makefile

@@ -102,6 +102,7 @@ DOCS = \
 	tagsrch.txt \
 	term.txt \
 	terminal.txt \
+	textprop.txt \
 	tips.txt \
 	todo.txt \
 	uganda.txt \
@@ -238,6 +239,7 @@ HTMLS = \
 	tagsrch.html \
 	term.html \
 	terminal.html \
+	textprop.html \
 	tips.html \
 	todo.html \
 	uganda.html \

runtime/doc/arabic.txt

@@ -319,4 +319,4 @@ There is one known minor bug,
 
 No other bugs are known to exist.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/autocmd.txt

@@ -301,6 +301,7 @@ Name			triggered by ~
 |FileChangedShellPost|	After handling a file changed since editing started
 |FileChangedRO|		before making the first change to a read-only file
 
+|DiffUpdated|		after diffs have been updated
 |DirChanged|		after the working directory has changed
 
 |ShellCmdPost|		after executing a shell command
@@ -656,12 +657,17 @@ FileChangedRO			Before making the first change to a read-only
 							*E881*
 				If the number of lines changes saving for undo
 				may fail and the change will be aborted.
+							*DiffUpdated*
+DiffUpdated			After diffs have been updated.  Depending on
+				what kind of diff is being used (internal or
+				external) this can be triggered on every
+				change or when doing |:diffupdate|.
 							*DirChanged*
 DirChanged			The working directory has changed in response
 				to the |:cd| or |:lcd| commands, or as a
 				result of the 'autochdir' option.
 				The pattern can be:
-					"window" to trigger on `:lcd
+					"window" to trigger on `:lcd`
 					"global" to trigger on `:cd`
 					"auto"   to trigger on 'autochdir'.
 					"drop"	 to trigger on editing a file
@@ -829,13 +835,14 @@ MenuPopup			Just before showing the popup menu (under the
 				right mouse button).  Useful for adjusting the
 				menu for what is under the cursor or mouse
 				pointer.
-				The pattern is matched against a single
-				character representing the mode:
+				The pattern is matched against one or two
+				characters representing the mode:
 					n	Normal
 					v	Visual
 					o	Operator-pending
 					i	Insert
 					c	Command line
+					tl	Terminal
 							*OptionSet*
 OptionSet			After setting an option.  The pattern is
 				matched against the long option name.
@@ -859,6 +866,9 @@ OptionSet			After setting an option.  The pattern is
 				plugin. You can always use `:noa` to prevent
 				triggering this autocommand.
 
+				When using |:set| in the autocommand the event
+				is not triggered again.
+
 							*QuickFixCmdPre*
 QuickFixCmdPre			Before a quickfix command is run (|:make|,
 				|:lmake|, |:grep|, |:lgrep|, |:grepadd|,
@@ -1593,4 +1603,4 @@ This will write the file without triggering the autocommands defined by the
 gzip plugin.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 8.1.  Last change: 2018 May 12
+*change.txt*    For Vim version 8.1.  Last change: 2018 Dec 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -177,8 +177,6 @@ gR			Enter Virtual Replace mode: Each character you type
 			<Tab> may replace several characters at once.
 			Repeat the entered text [count]-1 times.  See
 			|Virtual-Replace-mode| for more details.
-			{not available when compiled without the |+vreplace|
-			feature}
 
 							*c*
 ["x]c{motion}		Delete {motion} text [into register x] and start
@@ -303,8 +301,6 @@ gr{char}		Replace the virtual characters under the cursor with
 			space.  See |gR| and |Virtual-Replace-mode| for more
 			details.  As with |r| a count may be given.
 			{char} can be entered like with |r|.
-			{not available when compiled without the |+vreplace|
-			feature}
 
 						*digraph-arg*
 The argument for Normal mode commands like |r| and |t| is a single character.
@@ -480,6 +476,10 @@ SHIFTING LINES LEFT OR RIGHT				*shift-left-right*
 							*<*
 <{motion}		Shift {motion} lines one 'shiftwidth' leftwards.
 
+			If the 'vartabstop' feature is enabled, and the
+			'shiftwidth' option is set to zero, the amount of
+			indent is calculated at the first non-blank character
+			in the line.
 							*<<*
 <<			Shift [count] lines one 'shiftwidth' leftwards.
 
@@ -491,6 +491,10 @@ SHIFTING LINES LEFT OR RIGHT				*shift-left-right*
 							*>*
  >{motion}		Shift {motion} lines one 'shiftwidth' rightwards.
 
+			If the 'vartabstop' feature is enabled, and the
+			'shiftwidth' option is set to zero, the amount of
+			indent is calculated at the first non-blank character
+			in the line.
 							*>>*
  >>			Shift [count] lines one 'shiftwidth' rightwards.
 
@@ -712,6 +716,7 @@ The flags that you can use for the substitute commands:
 	search pattern.
 	{not in Vi: highlighting of the match, other responses than 'y' or 'n'}
 
+							*:s_e*
 [e]     When the search pattern fails, do not issue an error message and, in
 	particular, continue in maps as if no error occurred.  This is most
 	useful to prevent the "No match" error from breaking a mapping.  Vim
@@ -723,6 +728,7 @@ The flags that you can use for the substitute commands:
 		Interrupted
 	{not in Vi}
 
+							*:s_g*
 [g]	Replace all occurrences in the line.  Without this argument,
 	replacement occurs only for the first occurrence in each line.  If
 	the 'edcompatible' option is on, Vim remembers this flag and toggles
@@ -730,26 +736,30 @@ The flags that you can use for the substitute commands:
 	pattern.  If the 'gdefault' option is on, this flag is on by default
 	and the [g] argument switches it off.
 
+							*:s_i*
 [i]	Ignore case for the pattern.  The 'ignorecase' and 'smartcase' options
 	are not used.
 	{not in Vi}
 
+							*:s_I*
 [I]	Don't ignore case for the pattern.  The 'ignorecase' and 'smartcase'
 	options are not used.
 	{not in Vi}
 
+							*:s_n*
 [n]	Report the number of matches, do not actually substitute.  The [c]
 	flag is ignored.  The matches are reported as if 'report' is zero.
 	Useful to |count-items|.
 	If \= |sub-replace-expression| is used, the expression will be
 	evaluated in the |sandbox| at every match.
 
-[p]	Print the line containing the last substitute.
+[p]	Print the line containing the last substitute.  *:s_p*
 
-[#]	Like [p] and prepend the line number.
+[#]	Like [p] and prepend the line number.  *:s_#*
 
-[l]	Like [p] but print the text like |:list|.
+[l]	Like [p] but print the text like |:list|.  *:s_l*
 
+							*:s_r*
 [r]	Only useful in combination with `:&` or `:s` without arguments.  `:&r`
 	works the same way as `:~`:  When the search pattern is empty, use the
 	previously used search pattern instead of the search pattern from the
@@ -848,7 +858,7 @@ the |substitute()| function with the following exceptions:
   - magic is always set without regard to 'magic'.
   - A ~ inserts a tilde literally.
   - <CR> and \r inserts a carriage-return (CTRL-M).
-  - \<CR> does not have a special meaning. it's just one of \x.
+  - \<CR> does not have a special meaning. It's just one of \x.
 
 Examples: >
   :s/a\|b/xxx\0xxx/g		 modifies "a b"	     to "xxxaxxx xxxbxxx"
@@ -934,9 +944,9 @@ When the result is a |List| then the items are joined with separating line
 breaks.  Thus each item becomes a line, except that they can contain line
 breaks themselves.
 
-The whole matched text can be accessed with "submatch(0)".  The text matched
-with the first pair of () with "submatch(1)".  Likewise for further
-sub-matches in ().
+The |submatch()| function can be used to obtain matched text.  The whole
+matched text can be accessed with "submatch(0)".  The text matched with the
+first pair of () with "submatch(1)".  Likewise for further sub-matches in ().
 
 Be careful: The separation character must not appear in the expression!
 Consider using a character like "@" or ":".  There is no problem if the result
@@ -1451,7 +1461,7 @@ to the name of an external program for Vim to use for text formatting.  The
 program.
 
                                                         *format-formatexpr*
-The 'formatexpr' option can be set to a Vim Script function that performs
+The 'formatexpr' option can be set to a Vim script function that performs
 reformatting of the buffer.  This should usually happen in an |ftplugin|,
 since formatting is highly dependent on the type of file.  It makes
 sense to use an |autoload| script, so the corresponding script is only loaded
@@ -1485,7 +1495,7 @@ text.  Put it in your autoload directory, e.g. ~/.vim/autoload/format.vim: >
 
 You can then enable the formatting by executing: >
   setlocal formatexpr=format#Format()
->
+
 Note: this function explicitly returns non-zero when called from insert mode
 (which basically means, text is inserted beyond the 'textwidth' limit).  This
 causes Vim to fall back to reformat the text by using the internal formatter.
@@ -1884,4 +1894,4 @@ The sorting can be interrupted, but if you interrupt it too late in the
 process you may end up with duplicated lines.  This also depends on the system
 library function used.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/channel.txt

@@ -163,6 +163,9 @@ Use |ch_status()| to see if the channel could be opened.
 				The "close_cb" is also considered for this.
 		    "never"	All messages will be kept.
 
+							*channel-noblock*
+"noblock"	Same effect as |job-noblock|.  Only matters for writing.
+
 							*waittime*
 "waittime"	The time to wait for the connection to be made in
 		milliseconds.  A negative number waits forever.
@@ -594,6 +597,17 @@ See |job_setoptions()| and |ch_setoptions()|.
 			Note: when writing to a file or buffer and when
 			reading from a buffer NL mode is used by default.
 
+						*job-noblock*
+"noblock": 1		When writing use a non-blocking write call.  This
+			avoids getting stuck if Vim should handle other
+			messages in between, e.g. when a job sends back data
+			to Vim.  It implies that when `ch_sendraw()` returns
+			not all data may have been written yet.
+			This option was added in patch 8.1.0350, test with: >
+				if has("patch-8.1.350")
+				  let options['noblock'] = 1
+				endif
+<
 						*job-callback*
 "callback": handler	Callback for something to read on any part of the
 			channel.
@@ -816,4 +830,4 @@ the cursor to the last line.  "A" will move to the end of the line, "I" to the
 start of the line.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/cmdline.txt

@@ -534,8 +534,45 @@ after a command causes the rest of the line to be ignored.  This can be used
 to add comments.  Example: >
 	:set ai		"set 'autoindent' option
 It is not possible to add a comment to a shell command ":!cmd" or to the
-":map" command and a few others, because they see the '"' as part of their
-argument.  This is mentioned where the command is explained.
+":map" command and a few others (mainly commands that expect expressions)
+that see the '"' as part of their argument:
+
+    :argdo
+    :autocmd
+    :bufdo
+    :cexpr (and the like)
+    :cdo (and the like)
+    :command
+    :cscope (and the like)
+    :debug
+    :display
+    :echo (and the like)
+    :elseif
+    :execute
+    :folddoopen
+    :folddoclosed
+    :for
+    :grep (and the like)
+    :help (and the like)
+    :if
+    :let
+    :make
+    :map (and the like including :abbrev commands)
+    :menu (and the like)
+    :mkspell
+    :normal
+    :ownsyntax
+    :popup
+    :promptfind (and the like)
+    :registers
+    :return
+    :sort
+    :syntax
+    :tabdo
+    :tearoff
+    :vimgrep (and the like)
+    :while
+    :windo
 
 							*:bar* *:\bar*
 '|' can be used to separate commands, so you can give multiple commands in one
@@ -832,11 +869,12 @@ it, no matter how many backslashes.
 	   \\#			\#
 Also see |`=|.
 
-			       *:<cword>* *:<cWORD>* *:<cfile>* *<cfile>*
-			       *:<sfile>* *<sfile>* *:<afile>* *<afile>*
-			       *:<abuf>* *<abuf>* *:<amatch>* *<amatch>*
-			       *:<cexpr>* *<cexpr>*
-			       *<slnum>* *E495* *E496* *E497* *E499* *E500*
+			       *:<cword>* *<cword>* *:<cWORD>* *<cWORD>*
+			       *:<cexpr>* *<cexpr>* *:<cfile>* *<cfile>*
+			       *:<afile>* *<afile>* *:<abuf>* *<abuf>*
+			       *:<amatch>* *<amatch>*
+			       *:<sfile>* *<sfile>* *:<slnum>* *<slnum>*
+			       *:<sflnum>* *<sflnum>* *E499* *E500*
 Note: these are typed literally, they are not special keys!
 	<cword>    is replaced with the word under the cursor (like |star|)
 	<cWORD>    is replaced with the WORD under the cursor (see |WORD|)
@@ -849,15 +887,16 @@ Note: these are typed literally, they are not special keys!
 		   |gf| uses)
 	<afile>    When executing autocommands, is replaced with the file name
 		   of the buffer being manipulated, or the file for a read or
-		   write.
+		   write.  *E495*
 	<abuf>     When executing autocommands, is replaced with the currently
 		   effective buffer number (for ":r file" and ":so file" it is
 		   the current buffer, the file being read/sourced is not in a
-		   buffer).
+		   buffer).  *E496*
 	<amatch>   When executing autocommands, is replaced with the match for
-		   which this autocommand was executed.  It differs from
-		   <afile> only when the file name isn't used to match with
-		   (for FileType, Syntax and SpellFileMissing events).
+		   which this autocommand was executed.  *E497*
+		   It differs from <afile> only when the file name isn't used
+		   to match with (for FileType, Syntax and SpellFileMissing
+		   events).
 	<sfile>    When executing a ":source" command, is replaced with the
 		   file name of the sourced file.  *E498*
 		   When executing a function, is replaced with:
@@ -867,9 +906,12 @@ Note: these are typed literally, they are not special keys!
 		   Note that filename-modifiers are useless when <sfile> is
 		   used inside a function.
 	<slnum>	   When executing a ":source" command, is replaced with the
-	           line number.  *E842*
+		   line number.  *E842*
 		   When executing a function it's the line number relative to
 		   the start of the function.
+	<sflnum>   When executing a script, is replaced with the line number.
+		   It differs from <slnum> in that <sflnum> is replaced with
+		   the script line number in any situation.  *E961*
 
 							 *filename-modifiers*
 *:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs* *::S*
@@ -1164,4 +1206,4 @@ The character used for the pattern indicates the type of command-line:
 	@	string for |input()|
 	-	text for |:insert| or |:append|
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/debug.txt

@@ -172,4 +172,4 @@ Visual C++ 2005 Express Edition can be downloaded for free from:
     http://msdn.microsoft.com/vstudio/express/visualC/default.aspx
 
 =========================================================================
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/debugger.txt

@@ -139,4 +139,4 @@ Programming Environment.
 
 For Sun NetBeans support see |netbeans|.
 
- vim:tw=78:sw=4:ts=8:ft=help:norl:
+ vim:tw=78:sw=4:ts=8:noet:ft=help:norl:

runtime/doc/develop.txt

@@ -563,4 +563,4 @@ long	    32 or 64 bit signed, can hold a pointer
 Note that some compilers cannot handle long lines or strings.  The C89
 standard specifies a limit of 509 characters.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/diff.txt

@@ -39,7 +39,9 @@ The second and following arguments may also be a directory name.  Vim will
 then append the file name of the first argument to the directory name to find
 the file.
 
-This only works when a standard "diff" command is available.  See 'diffexpr'.
+By default an internal diff library will be used.  When 'diffopt' or
+'diffexpr' has been set an external "diff" command will be used.  This only
+works when such a diff program is available.
 
 Diffs are local to the current tab page |tab-page|.  You can't see diffs with
 a window in another tab page.  This does make it possible to have several
@@ -344,8 +346,9 @@ between file1 and file2: >
 
 The ">" is replaced with the value of 'shellredir'.
 
-The output of "diff" must be a normal "ed" style diff.  Do NOT use a context
-diff.  This example explains the format that Vim expects: >
+The output of "diff" must be a normal "ed" style diff or a unified diff.  Do
+NOT use a context diff.  This example explains the format that Vim expects for
+the "ed" style diff: >
 
 	1a2
 	> bbb
@@ -384,12 +387,16 @@ Example (this does almost the same as 'diffexpr' being empty): >
 	   endif
 	   silent execute "!diff -a --binary " . opt . v:fname_in . " " . v:fname_new .
 		\  " > " . v:fname_out
+	   redraw!
 	endfunction
 
 The "-a" argument is used to force comparing the files as text, comparing as
 binaries isn't useful.  The "--binary" argument makes the files read in binary
 mode, so that a CTRL-Z doesn't end the text on DOS.
 
+The `redraw!` command may not be needed, depending on whether executing a
+shell command shows something on the display or not.
+
 						*E810* *E97*
 Vim will do a test if the diff output looks alright.  If it doesn't, you will
 get an error message.  Possible causes:
@@ -441,4 +448,4 @@ evaluating 'patchexpr'.  This hopefully avoids that files in the current
 directory are accidentally patched.  Vim will also delete files starting with
 v:fname_in and ending in ".rej" and ".orig".
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/digraph.txt

@@ -1,4 +1,4 @@
-*digraph.txt*   For Vim version 8.1.  Last change: 2016 Nov 04
+*digraph.txt*   For Vim version 8.1.  Last change: 2018 Dec 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -24,7 +24,9 @@ An alternative is using the 'keymap' option.
 1. Defining digraphs					*digraphs-define*
 
 						*:dig* *:digraphs*
-:dig[raphs]		show currently defined digraphs.
+:dig[raphs][!]		Show currently defined digraphs.
+			With [!] headers are used to make it a bit easier to
+			find a specific character.
 							*E104* *E39*
 :dig[raphs] {char1}{char2} {number} ...
 			Add digraph {char1}{char2} to the list.  {number} is
@@ -111,11 +113,14 @@ this, you will have to type <BS> e again.  To avoid this don't set the
 
 You may have problems using Vim with characters which have a value above 128.
 For example: You insert ue (u-umlaut) and the editor echoes \334 in Insert
-mode.  After leaving the Insert mode everything is fine.  Note that fmt
-removes all characters with a value above 128 from the text being formatted.
-On some Unix systems this means you have to define the environment-variable
-LC_CTYPE.  If you are using csh, then put the following line in your .cshrc: >
-	setenv LC_CTYPE iso_8859_1
+mode.  After leaving the Insert mode everything is fine.  On some Unix systems
+this means you have to define the environment-variable LC_CTYPE.  If you are
+using csh, then put the following line in your .cshrc: >
+	setenv LC_CTYPE en_US.utf8
+(or similar for a different language or country). The value must be a valid
+locale on your system, i.e. on Unix-like systems it must be present in the
+output of >
+	locale -a
 
 ==============================================================================
 3. Default digraphs					*digraphs-default*
@@ -1488,4 +1493,4 @@ char  digraph	hex	dec	official name ~
 ſt	ft	FB05	64261	LATIN SMALL LIGATURE LONG S T
 st	st	FB06	64262	LATIN SMALL LIGATURE ST
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.1.  Last change: 2018 Mar 29
+*editing.txt*   For Vim version 8.1.  Last change: 2018 Dec 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1415,7 +1415,7 @@ cannot be read without the right key.
 The text in the swap file and the undo file is also encrypted.  *E843*
 However, this is done block-by-block and may reduce the time needed to crack a
 password.  You can disable the swap file, but then a crash will cause you to
-lose your work.  The undo file can be disabled without much disadvantage. >
+lose your work.  The undo file can be disabled without too much disadvantage. >
 	:set noundofile
 	:noswapfile edit secrets
 
@@ -1747,4 +1747,4 @@ There are three different types of searching:
    currently work with 'path' items that contain a URL or use the double star
    with depth limiter (/usr/**2) or upward search (;) notations.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/evim-ja.UTF-8.1

@@ -25,11 +25,9 @@ MS-Windows のメモ帳のような動作です。
 .PP
 引数や Vim についての詳細は vim(1) を参照してください。
 .PP
-オプション 'insertmode' が設定され、テキストを直接、入力できるようになりま
-す。
+オプション 'insertmode' が設定され、テキストを直接、入力できるようになります。
 .br
-コピーとペーストのキー操作が MS-Windows と同じになるように、マップが設定され
-ます。
+コピーとペーストのキー操作が MS-Windows と同じになるように、マップが設定されます。
 CTRL-X が切り取り、CTRL-C がコピー、CTRL-V がペーストです。
 標準の CTRL-V の操作は CTRL-Q に割り当てられます。
 .SH オプション
@@ -41,8 +39,7 @@ eVim の初期化スクリプト。
 .SH 別名
 evim は "gumbies のための Vim" とも呼ばれています。
 evim を使っているあなたはきっと、頭にハンカチをかぶっているのです。
-(訳注: gumbies は Monty Python に登場するおもしろ集団。ハンカチをかぶっ
-ている。)
+(訳注: gumbies は Monty Python に登場するおもしろ集団。ハンカチをかぶっている。)
 .SH 関連項目
 vim(1)
 .SH 著者

runtime/doc/farsi.txt

@@ -266,4 +266,4 @@ changes made in the current line.
 
 For more information about the bugs refer to rileft.txt.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/filetype.txt

@@ -638,11 +638,31 @@ By default the following options are set, in accordance with PEP8: >
 
 	setlocal expandtab shiftwidth=4 softtabstop=4 tabstop=8
 
-To disable this behaviour, set the following variable in your vimrc: >
+To disable this behavior, set the following variable in your vimrc: >
 
 	let g:python_recommended_style = 0
 
 
+R MARKDOWN						*ft-rmd-plugin*
+
+By default ftplugin/html.vim is not sourced. If you want it sourced, add to
+your |vimrc|: >
+	let rmd_include_html = 1
+
+The 'formatexpr' option is set dynamically with different values for R code
+and for Markdown code. If you prefer that 'formatexpr' is not set, add to your
+|vimrc|: >
+	let rmd_dynamic_comments = 0
+
+
+R RESTRUCTURED TEXT					*ft-rrst-plugin*
+
+The 'formatexpr' option is set dynamically with different values for R code
+and for ReStructured text. If you prefer that 'formatexpr' is not set, add to
+your |vimrc|: >
+	let rrst_dynamic_comments = 0
+
+
 RPM SPEC						*ft-spec-plugin*
 
 Since the text for this plugin is rather long it has been put in a separate
@@ -695,4 +715,4 @@ The mappings can be disabled with: >
 <
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/fold.txt

@@ -601,4 +601,4 @@ used.  Otherwise the values from the window where the buffer was edited last
 are used.
 
 ==============================================================================
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/ft_rust.txt

@@ -236,4 +236,4 @@ It also has a few other mappings:
 			Note: This binding is only available in MacVim.
 
 ==============================================================================
- vim:tw=78:sw=4:noet:ts=8:ft=help:norl:
+ vim:tw=78:sw=4:ts=8:noet:ft=help:norl:

runtime/doc/ft_sql.txt

@@ -777,4 +777,4 @@ Setting the filetype back to Perl sets all the usual "perl" related items back
 as they were.
 
 
-vim:tw=78:ts=8:ft=help:norl:
+vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/gui.txt

@@ -547,15 +547,16 @@ floating menus that do not appear on the main menu bar.
 
 5.2 Creating New Menus					*creating-menus*
 
-				*:me*  *:menu*  *:noreme*  *:noremenu*
-				*:am*  *:amenu* *:an*      *:anoremenu*
-				*:nme* *:nmenu* *:nnoreme* *:nnoremenu*
-				*:ome* *:omenu* *:onoreme* *:onoremenu*
-				*:vme* *:vmenu* *:vnoreme* *:vnoremenu*
-				*:xme* *:xmenu* *:xnoreme* *:xnoremenu*
-				*:sme* *:smenu* *:snoreme* *:snoremenu*
-				*:ime* *:imenu* *:inoreme* *:inoremenu*
-				*:cme* *:cmenu* *:cnoreme* *:cnoremenu*
+				*:me*  *:menu*   *:noreme*  *:noremenu*
+				*:am*  *:amenu*  *:an*      *:anoremenu*
+				*:nme* *:nmenu*  *:nnoreme* *:nnoremenu*
+				*:ome* *:omenu*  *:onoreme* *:onoremenu*
+				*:vme* *:vmenu*  *:vnoreme* *:vnoremenu*
+				*:xme* *:xmenu*  *:xnoreme* *:xnoremenu*
+				*:sme* *:smenu*  *:snoreme* *:snoremenu*
+				*:ime* *:imenu*  *:inoreme* *:inoremenu*
+				*:cme* *:cmenu*  *:cnoreme* *:cnoremenu*
+				*:tlm* *:tlmenu* *:tln*     *:tlnoremenu*
 				*E330* *E327* *E331* *E336* *E333*
 				*E328* *E329* *E337* *E792*
 To create a new menu item, use the ":menu" commands.  They are mostly like
@@ -571,6 +572,10 @@ the mouse button down on this will pop up a menu containing the item
 "Big Changes", which is a sub-menu containing the item "Delete All Spaces",
 which when selected, performs the operation.
 
+To create a menu for terminal mode, use |:tlmenu| instead of |:tmenu| unlike
+key mapping (|:tmap|). This is because |:tmenu| is already used for defining
+tooltips for menus. See |terminal-typing|.
+
 Special characters in a menu name:
 
 	&	The next character is the shortcut key.  Make sure each
@@ -589,9 +594,9 @@ With the shortcut "F" (while keeping the <Alt> key pressed), and then "O",
 this menu can be used.  The second part is shown as "Open     :e".  The ":e"
 is right aligned, and the "O" is underlined, to indicate it is the shortcut.
 
-The ":amenu" command can be used to define menu entries for all modes at once.
-To make the command work correctly, a character is automatically inserted for
-some modes:
+The ":amenu" command can be used to define menu entries for all modes at once,
+except for Terminal mode.  To make the command work correctly, a character is
+automatically inserted for some modes:
 	mode		inserted	appended	~
 	Normal		nothing		nothing
 	Visual		<C-C>		<C-\><C-G>
@@ -865,6 +870,16 @@ be used to complete the name of the menu item.
 				insert-mode menu Eg: >
 	:emenu File.Exit
 
+:[range]em[enu] {mode} {menu}	Like above, but execute the menu for {mode}:
+				    'n': |:nmenu|  Normal mode
+				    'v': |:vmenu|  Visual mode
+				    's': |:smenu|  Select mode
+				    'o': |:omenu|  Operator-pending mode
+				    't': |:tlmenu| Terminal mode
+				    'i': |:imenu|  Insert mode
+				    'c': |:cmenu|  Cmdline mode
+
+
 If the console-mode vim has been compiled with WANT_MENU defined, you can
 use :emenu to access useful menu items you may have got used to from GUI
 mode.  See 'wildmenu' for an option that works well with this.  See
@@ -885,6 +900,7 @@ using the last visual selection.
 						*:sunme* *:sunmenu*
 						*:iunme* *:iunmenu*
 						*:cunme* *:cunmenu*
+						*:tlu*   *:tlunmenu*
 To delete a menu item or a whole submenu, use the unmenu commands, which are
 analogous to the unmap commands.  Eg: >
     :unmenu! Edit.Paste
@@ -951,6 +967,8 @@ See section |42.4| in the user manual.
 :tu[nmenu] {menupath}		Remove a tip for a menu or tool.
 				{only in X11 and Win32 GUI}
 
+Note: To create menus for terminal mode, use |:tlmenu| instead.
+
 When a tip is defined for a menu item, it appears in the command-line area
 when the mouse is over that item, much like a standard Windows menu hint in
 the status bar.  (Except when Vim is in Command-line mode, when of course
@@ -1075,4 +1093,4 @@ careful!
 For the Win32 GUI the external commands are executed in a separate window.
 See |gui-shell-win32|.
 
- vim:tw=78:sw=4:ts=8:ft=help:norl:
+ vim:tw=78:sw=4:ts=8:noet:ft=help:norl:

runtime/doc/gui_w32.txt

@@ -451,4 +451,4 @@ To try out if XPM support works do this: >
 	:exe 'sign place 1 line=1 name=vimxpm file=' . expand('%:p')
 <
 
- vim:tw=78:sw=4:ts=8:ft=help:norl:
+ vim:tw=78:sw=4:ts=8:noet:ft=help:norl:

runtime/doc/gui_x11.txt

@@ -376,8 +376,8 @@ you might have to use the file ~/.gtkrc-2.0 instead, depending on your
 distribution.
 
 For GTK+ 3, an effect similar to the above can be obtained by adding the
-following snippet of CSS code to $XDG_HOME_DIR/gtk-3.0/gtk.css (usually,
-$HOME/.config/gtk-3.0/gtk.css):
+following snippet of CSS code to $XDG_HOME_DIR/gtk-3.0/gtk.css (see the next
+section):
 
 For GTK+ 3 < 3.20: >
 
@@ -408,6 +408,10 @@ stable support for GTK+ CSS:
 GTK+ uses CSS for styling and layout of widgets.  In this subsection, we'll
 have a quick look at GTK+ CSS through simple, illustrative examples.
 
+You can usually edit the config with: >
+	vim $HOME/.config/gtk-3.0/gtk.css
+
+
 Example 1.  Empty Space Adjustment ~
 
 By default, the toolbar and the tabline of the GTK+ 3 GUI are somewhat larger
@@ -492,6 +496,16 @@ unexpectedly less attractive or even deteriorates their usability.  Keep this
 in mind always when you try improving a theme.
 
 
+Example 3.  border color ~
+
+To eliminate borders when maximized: >
+
+    @define-color bg_color #1B2B34;
+    #vim-main-window {
+	background-color: @bg_color;
+    }
+
+
 Using Vim as a GTK+ plugin ~
 							*gui-gtk-socketid*
 When the GTK+ version of Vim starts up normally, it creates its own top level
@@ -721,4 +735,4 @@ and use CLIPBOARD ("+) for cut/copy/paste operations.  You thus have access to
 both by choosing to use either of the "* or "+ registers.
 
 
- vim:tw=78:sw=4:ts=8:ft=help:norl:
+ vim:tw=78:sw=4:ts=8:noet:ft=help:norl:

runtime/doc/hangulin.txt

@@ -109,4 +109,4 @@ Send comments, patches and suggestions to:
 				    SungHyun Nam <goweol@gmail.com>
 				    Chi-Deok Hwang <...>
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/hebrew.txt

@@ -139,4 +139,4 @@ The result is that all Hebrew characters are displayed as ~x.  To solve this
 problem, set isprint=@,128-255.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 8.1.  Last change: 2017 Oct 28
+*help.txt*	For Vim version 8.1.  Last change: 2018 Dec 14
 
 			VIM - main help file
 									 k
@@ -113,7 +113,6 @@ Basic editing ~
 |scroll.txt|	scrolling the text in the window
 |insert.txt|	Insert and Replace mode
 |change.txt|	deleting and replacing text
-|indent.txt|	automatic indenting for C and other languages
 |undo.txt|	Undo and Redo
 |repeat.txt|	repeating commands, Vim scripts and debugging
 |visual.txt|	using the Visual mode (selecting a text area)
@@ -126,14 +125,11 @@ Advanced editing ~
 |pattern.txt|	regexp patterns and search commands
 |map.txt|	key mapping and abbreviations
 |tagsrch.txt|	tags and special searches
-|quickfix.txt|	commands for a quick edit-compile-fix cycle
 |windows.txt|	commands for using multiple windows and buffers
 |tabpage.txt|	commands for using multiple tab pages
-|syntax.txt|	syntax highlighting
 |spell.txt|	spell checking
 |diff.txt|	working with two to four versions of the same file
 |autocmd.txt|	automatically executing commands on an event
-|filetype.txt|	settings done specifically for a type of file
 |eval.txt|	expression evaluation, conditional commands
 |channel.txt|	Jobs, Channels, inter-process communication
 |fold.txt|	hide (fold) ranges of lines
@@ -143,18 +139,27 @@ Special issues ~
 |remote.txt|	using Vim as a server or client
 |term.txt|	using different terminals and mice
 |terminal.txt|	Terminal window support
+
+Programming language support ~
+|indent.txt|	automatic indenting for C and other languages
+|syntax.txt|	syntax highlighting
+|textprop.txt|	Attaching properties to text for highlighting or other
+|filetype.txt|	settings done specifically for a type of file
+|quickfix.txt|	commands for a quick edit-compile-fix cycle
+|ft_ada.txt|	Ada (the programming language) support
+|ft_rust.txt|	Filetype plugin for Rust
+|ft_sql.txt|	about the SQL filetype plugin
+
+Language support ~
 |digraph.txt|	list of available digraphs
 |mbyte.txt|	multi-byte text support
 |mlang.txt|	non-English language support
+|rileft.txt|	right-to-left editing mode
 |arabic.txt|	Arabic language support and editing
 |farsi.txt|	Farsi (Persian) editing
 |hebrew.txt|	Hebrew language support and editing
 |russian.txt|	Russian language support and editing
-|ft_ada.txt|	Ada (the programming language) support
-|ft_rust.txt|	Filetype plugin for Rust
-|ft_sql.txt|	about the SQL filetype plugin
 |hangulin.txt|	Hangul (Korean) input mode
-|rileft.txt|	right-to-left editing mode
 
 GUI ~
 |gui.txt|	Graphical User Interface (GUI)
@@ -225,4 +230,4 @@ will try to find help for it.  Especially for options in single quotes, e.g.
 'compatible'.
 
 ------------------------------------------------------------------------------
- vim:tw=78:fo=tcq2:isk=!-~,^*,^\|,^\":ts=8:ft=help:norl:
+ vim:tw=78:isk=!-~,^*,^\|,^\":ts=8:noet:ft=help:norl:

runtime/doc/helphelp.txt

@@ -370,4 +370,4 @@ highlighting.  So do these:
 
 You can find the details in $VIMRUNTIME/syntax/help.vim
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/howto.txt

@@ -93,4 +93,4 @@ How to ...				*howdoi* *how-do-i* *howto* *how-to*
 |2html.vim|		convert a colored file to HTML
 |less|			use Vim like less or more with syntax highlighting
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/if_cscop.txt

@@ -484,4 +484,4 @@ For a cscope version for Win32 see (seems abandoned):
 Win32 support was added by Sergey Khorev <sergey.khorev@gmail.com>.  Contact
 him if you have Win32-specific issues.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/if_mzsch.txt

@@ -312,4 +312,4 @@ MzScheme's raco command:
   raco pkg install cext-lib         # raco ctool command
 <
 ======================================================================
-  vim:tw=78:ts=8:sts=4:ft=help:norl:
+  vim:tw=78:ts=8:noet:sts=4:ft=help:norl:

runtime/doc/if_ole.txt

@@ -202,4 +202,4 @@ In Vim >
 [.Net remarks provided by Dave Fishburn and Brian Sturk]
 
 ==============================================================================
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/if_perl.txt

@@ -44,8 +44,9 @@ The Perl patches for Vim were made by:
 	Sven Verdoolaege <skimo@breughel.ufsia.ac.be>
 	Matt Gerassimof
 
-Perl for MS-Windows can be found at: http://www.perl.com/
-The ActiveState one should work.
+Perl for MS-Windows (and other platforms) can be found at:
+	http://www.perl.org/
+The ActiveState one should work, Strawberry Perl is a good alternative.
 
 ==============================================================================
 3. Using the Perl interface				*perl-using*
@@ -303,4 +304,4 @@ version of the shared library must match the Perl version Vim was compiled
 with.
 
 ==============================================================================
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/if_pyth.txt

@@ -60,9 +60,10 @@ Example: >
 	endfunction
 
 To see what version of Python you have: >
-	:python import sys
 	:python print(sys.version)
 
+There is no need to import sys, it's done by default.
+
 Note: Python is very sensitive to the indenting.  Make sure the "class" line
 and "EOF" do not have any indent.
 
@@ -81,6 +82,18 @@ Examples:
 >
 	:pydo return "%s\t%d" % (line[::-1], len(line))
 	:pydo if line: return "%4d: %s" % (linenr, line)
+<
+One can use `:pydo` in possible conjunction with `:py` to filter a range using
+python. For example: >
+
+	:py3 << EOF
+	needle = vim.eval('@a')
+	replacement = vim.eval('@b')
+
+	def py_vim_string_replace(str):
+		return str.replace(needle, replacement)
+	EOF
+	:'<,'>py3do return py_vim_string_replace(line)
 <
 							*:pyfile* *:pyf*
 :[range]pyf[ile] {file}
@@ -98,7 +111,6 @@ Python commands cannot be used in the |sandbox|.
 
 To pass arguments you need to set sys.argv[] explicitly.  Example: >
 
-	:python import sys
 	:python sys.argv = ["foo", "bar"]
 	:pyfile myscript.py
 
@@ -168,11 +180,15 @@ vim.eval(str)						*python-eval*
 	- a dictionary if the Vim expression evaluates to a Vim dictionary
 	Dictionaries and lists are recursively expanded.
 	Examples: >
+	    :" value of the 'textwidth' option
 	    :py text_width = vim.eval("&tw")
-	    :py str = vim.eval("12+12")		# NB result is a string! Use
-						# string.atoi() to convert to
-						# a number.
-
+	    :
+	    :" contents of the 'a' register
+	    :py a_reg = vim.eval("@a") 
+	    :
+	    :" Result is a string! Use string.atoi() to convert to a number.
+	    :py str = vim.eval("12+12")
+	    :
 	    :py tagList = vim.eval('taglist("eval_expr")')
 <	The latter will return a python list of python dicts, for instance:
 	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name': ~
@@ -924,4 +940,4 @@ If you have more than one version of Python 3, you need to link python3 to the
 one you prefer, before running configure.
 
 ==============================================================================
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/if_ruby.txt

@@ -145,7 +145,7 @@ self[{n}]	Returns the buffer object for the number {n}.  The first number
 
 Methods:
 
-name		Returns the name of the buffer.
+name		Returns the full name of the buffer.
 number		Returns the number of the buffer.
 count		Returns the number of lines.
 length		Returns the number of lines.
@@ -181,6 +181,7 @@ height = {n}	Sets the window height to {n}.
 width		Returns the width of the window.
 width = {n}	Sets the window width to {n}.
 cursor		Returns a [row, col] array for the cursor position.
+		First line number is 1 and first column number is 0.
 cursor = [{row}, {col}]
 		Sets the cursor position to {row} and {col}.
 
@@ -233,4 +234,4 @@ version of the shared library must match the Ruby version Vim was compiled
 with.
 
 ==============================================================================
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/if_sniff.txt

@@ -8,4 +8,4 @@
 The SNiFF+ support was removed at patch 7.4.1433.  If you want to check it out
 sync to before that.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/if_tcl.txt

@@ -544,4 +544,4 @@ of DYNAMIC_TCL_DLL file what was specified at compile time.  The version of
 the shared library must match the Tcl version Vim was compiled with.
 
 ==============================================================================
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/indent.txt

@@ -588,8 +588,9 @@ The basics for using flexible indenting are explained in section |30.3| of the
 user manual.
 
 If you want to write your own indent file, it must set the 'indentexpr'
-option.  Setting the 'indentkeys' option is often useful.  See the
-$VIMRUNTIME/indent directory for examples.
+option.  Setting the 'indentkeys' option is often useful.
+See the $VIMRUNTIME/indent/README.txt file for hints.
+See the $VIMRUNTIME/indent directory for examples.
 
 
 REMARKS ABOUT SPECIFIC INDENT FILES ~
@@ -602,14 +603,14 @@ the use of square and curly brackets, and otherwise by community convention.
 These conventions are not universally followed, so the Clojure indent script
 offers a few configurable options, listed below.
 
-If the current vim does not include searchpairpos(), the indent script falls
+If the current vim does not include |searchpairpos()|, the indent script falls
 back to normal 'lisp' indenting, and the following options are ignored.
 
 							*g:clojure_maxlines*
 
-Set maximum scan distance of searchpairpos(). Larger values trade performance
-for correctness when dealing with very long forms. A value of 0 will scan
-without limits.
+Set maximum scan distance of |searchpairpos()|. Larger values trade
+performance for correctness when dealing with very long forms. A value of 0
+will scan without limits.
 >
 	" Default
 	let g:clojure_maxlines = 100
@@ -935,11 +936,16 @@ given are the defaults.  Note that the variables are set to an expression, so
 that you can change the value of 'shiftwidth' later.
 
 Indent after an open paren: >
-	let g:pyindent_open_paren = '&sw * 2'
+	let g:pyindent_open_paren = 'shiftwidth() * 2'
 Indent after a nested paren: >
-	let g:pyindent_nested_paren = '&sw'
+	let g:pyindent_nested_paren = 'shiftwidth()'
 Indent for a continuation line: >
-	let g:pyindent_continue = '&sw * 2'
+	let g:pyindent_continue = 'shiftwidth() * 2'
+
+The method uses |searchpair()| to look back for unclosed parenthesis.  This
+can sometimes be slow, thus it timeouts after 150 msec.  If you notice the
+indenting isn't correct, you can set a larger timeout in msec: >
+	let g:pyindent_searchpair_timeout = 500
 
 
 R								*ft-r-indent*
@@ -978,6 +984,11 @@ Below is an example of indentation with and without this option enabled:
        paste(x)                                      paste(x)
    }                                             }
 <
+The code will be indented after lines that match the pattern
+`'\(&\||\|+\|-\|\*\|/\|=\|\~\|%\|->\)\s*$'`. If you want indentation after
+lines that match a different pattern, you should set the appropriate value of
+`r_indent_op_pattern` in your |vimrc|.
+
 
 SHELL							*ft-sh-indent*
 
@@ -1028,7 +1039,7 @@ Furthermore, setting the variable b:verilog_indent_width to change the
 indenting width (default is 'shiftwidth'): >
 
   let b:verilog_indent_width = 4
-  let b:verilog_indent_width = &sw * 2
+  let b:verilog_indent_width = shiftwidth() * 2
 
 In addition, you can turn the verbose mode for debug issue: >
 
@@ -1151,9 +1162,9 @@ VIM							*ft-vim-indent*
 For indenting Vim scripts there is one variable that specifies the amount of
 indent for a continuation line, a line that starts with a backslash: >
 
-	:let g:vim_indent_cont = &sw * 3
+	:let g:vim_indent_cont = shiftwidth() * 3
 
 Three times shiftwidth is the default value.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/index.txt

@@ -1583,6 +1583,9 @@ tag	      command	      action ~
 |:tjump|	:tj[ump]	like ":tselect", but jump directly when there
 				is only one match
 |:tlast|	:tl[ast]	jump to last matching tag
+|:tlmenu|	:tlm[enu]	add menu for Terminal-Job mode
+|:tlnoremenu|	:tln[oremenu]	like ":noremenu" but for Terminal-Job mode
+|:tlunmenu|	:tlu[nmenu]	remove menu for Terminal-Job mode
 |:tmapclear|	:tmapc[lear]	remove all mappings for Terminal-Job mode
 |:tmap|		:tma[p]		like ":map" but for Terminal-Job mode
 |:tmenu|	:tm[enu]	define menu tooltip
@@ -1657,4 +1660,4 @@ tag	      command	      action ~
 |:~|		:~		repeat last ":substitute"
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/insert.txt

@@ -1051,13 +1051,13 @@ The function must return the column where the completion starts.  It must be a
 number between zero and the cursor column "col('.')".  This involves looking
 at the characters just before the cursor and including those characters that
 could be part of the completed item.  The text between this column and the
-cursor column will be replaced with the matches.
+cursor column will be replaced with the matches.  If the returned value is
+larger than the cursor column, the cursor column is used.
 
-Special return values:
-   -1 If no completion can be done, the completion will be cancelled with an
-      error message.
-   -2 To cancel silently and stay in completion mode.
-   -3 To cancel silently and leave completion mode.
+Negative return values:
+   -2 	To cancel silently and stay in completion mode.
+   -3 	To cancel silently and leave completion mode.
+   Another negative value: completion starts at the cursor column
 
 On the second invocation the arguments are:
    a:findstart  0
@@ -2005,4 +2005,4 @@ self explanatory.  Using the long or the short version depends on the
 	[READ ERRORS]			not all of the file could be read
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/intro.txt

@@ -595,9 +595,9 @@ Virtual Replace mode	Virtual Replace mode is similar to Replace mode, but
 			If the 'showmode' option is on "-- VREPLACE --" is
 			shown at the bottom of the window.
 
-Insert Normal mode	Entered when CTRL-O given in Insert mode.  This is
-			like Normal mode, but after executing one command Vim
-			returns to Insert mode.
+Insert Normal mode	Entered when CTRL-O is typed in Insert mode (see
+			|i_CTRL-O|).  This is like Normal mode, but after
+			executing one command Vim returns to Insert mode.
 			If the 'showmode' option is on "-- (insert) --" is
 			shown at the bottom of the window.
 
@@ -906,4 +906,4 @@ buffer lines	logical lines	window lines	screen lines ~
 				6. ~ 
 
 ==============================================================================
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.1.  Last change: 2018 May 13
+*map.txt*       For Vim version 8.1.  Last change: 2018 Dec 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -371,8 +371,9 @@ job running in the terminal.  See |terminal-typing|.
 
 							*omap-info*
 Operator-pending mappings can be used to define a movement command that can be
-used with any operator.  Simple example: ":omap { w" makes "y{" work like "yw"
-and "d{" like "dw".
+used with any operator.  Simple example: >
+	:omap { w
+makes "y{" work like "yw" and "d{" like "dw".
 
 To ignore the starting cursor position and select different text, you can have
 the omap start Visual mode to select the text to be operated upon.  Example
@@ -383,9 +384,11 @@ Normal mode commands find the first '(' character and select the first word
 before it.  That usually is the function name.
 
 To enter a mapping for Normal and Visual mode, but not Operator-pending mode,
-first define it for all three modes, then unmap it for Operator-pending mode:
+first define it for all three modes, then unmap it for
+Operator-pending mode: >
 	:map    xx something-difficult
 	:ounmap xx
+
 Likewise for a mapping for Visual and Operator-pending mode or Normal and
 Operator-pending mode.
 
@@ -1220,6 +1223,10 @@ See |:verbose-cmd| for more information.
 			attributes (see below) are {attr}.  If the command
 			already exists, an error is reported, unless a ! is
 			specified, in which case the command is redefined.
+			There is one exception: When sourcing a script again,
+			a command that was previously defined in that script
+			will be silently replaced.
+
 
 :delc[ommand] {cmd}				*:delc* *:delcommand* *E184*
 			Delete the user-defined command {cmd}.
@@ -1227,7 +1234,8 @@ See |:verbose-cmd| for more information.
 :comc[lear]						*:comc* *:comclear*
 			Delete all user-defined commands.
 
-Command attributes
+
+Command attributes ~
 
 User-defined commands are treated by Vim just like any other Ex commands.  They
 can have arguments, or have a range specified.  Arguments are subject to
@@ -1238,14 +1246,15 @@ There are a number of attributes, split into four categories: argument
 handling, completion behavior, range handling, and special cases.  The
 attributes are described below, by category.
 
-Argument handling				*E175* *E176* *:command-nargs*
 
+Argument handling ~
+						*E175* *E176* *:command-nargs*
 By default, a user defined command will take no arguments (and an error is
 reported if any are supplied).  However, it is possible to specify that the
 command can take arguments, using the -nargs attribute.  Valid cases are:
 
 	-nargs=0    No arguments are allowed (the default)
-	-nargs=1    Exactly one argument is required, it includes spaces 
+	-nargs=1    Exactly one argument is required, it includes spaces
 	-nargs=*    Any number of arguments are allowed (0, 1, or many),
 		    separated by white space
 	-nargs=?    0 or 1 arguments are allowed
@@ -1268,8 +1277,10 @@ defined, not where it is invoked!  Example:
 Executing script2.vim will result in "None" being echoed.  Not what you
 intended!  Calling a function may be an alternative.
 
-Completion behavior				*:command-completion* *E179*
-					*E180* *E181* *:command-complete*
+
+Completion behavior ~
+				*:command-completion* *E179* *E180* *E181*
+				*:command-complete*
 By default, the arguments of user defined commands do not undergo completion.
 However, by specifying one or the other of the following attributes, argument
 completion can be enabled:
@@ -1314,9 +1325,9 @@ completion can be enabled:
 Note: That some completion methods might expand environment variables.
 
 
-Custom completion			*:command-completion-custom*
-					*:command-completion-customlist*
-					*E467* *E468*
+Custom completion ~
+				*:command-completion-custom*
+				*:command-completion-customlist* *E467* *E468*
 It is possible to define customized completion schemes via the "custom,{func}"
 or the "customlist,{func}" completion argument.  The {func} part should be a
 function with the following signature: >
@@ -1361,8 +1372,8 @@ the 'path' option: >
 This example does not work for file names with spaces!
 
 
-Range handling				*E177* *E178* *:command-range*
-							*:command-count*
+Range handling ~
+				*E177* *E178* *:command-range* *:command-count*
 By default, user-defined commands do not accept a line number range.  However,
 it is possible to specify that the command does take a range (the -range
 attribute), or that it takes an arbitrary count value, either in the line
@@ -1396,8 +1407,11 @@ Possible values are:
 	-addr=loaded_buffers	Range for loaded buffers
 	-addr=windows		Range for windows
 	-addr=tabs		Range for tab pages
+	-addr=other		other kind of range
 
-Special cases				*:command-bang* *:command-bar*
+
+Special cases ~
+					*:command-bang* *:command-bar*
 					*:command-register* *:command-buffer*
 There are some special cases as well:
 
@@ -1415,7 +1429,8 @@ replacement text separately.
 Note that these arguments can be abbreviated, but that is a deprecated
 feature.  Use the full name for new scripts.
 
-Replacement text
+
+Replacement text ~
 
 The replacement text for a user defined command is scanned for special escape
 sequences, using <...> notation.  Escape sequences are replaced with values
@@ -1552,4 +1567,4 @@ local to the script and use mappings local to the script.  When the user
 invokes the user command, it will run in the context of the script it was
 defined in.  This matters if |<SID>| is used in a command.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/mbyte.txt

@@ -1467,4 +1467,4 @@ Contributions specifically for the multi-byte features by:
 	Taro Muraoka  <koron@tka.att.ne.jp>
 	Yasuhiro Matsumoto <mattn@mail.goo.ne.jp>
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/message.txt

@@ -866,4 +866,4 @@ The |g<| command can be used to see the last page of previous command output.
 This is especially useful if you accidentally typed <Space> at the hit-enter
 prompt.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/mlang.txt

@@ -102,8 +102,10 @@ Or:
 
 This also contains tools xgettext, msgformat and others.
 
-libintl.dll should be placed in same directory with (g)vim.exe, or some
-place where PATH environment value describe.  Vim also finds libintl-8.dll.
+libintl.dll should be placed in same directory as (g)vim.exe, or one of the
+directories listed in the PATH environment value.  Vim also looks for the
+alternate names "libintl-8.dll" and "intl.dll".
+
 Message files (vim.mo) have to be placed in "$VIMRUNTIME/lang/xx/LC_MESSAGES",
 where "xx" is the abbreviation of the language (mostly two letters).
 
@@ -210,4 +212,4 @@ a message adapt to language preferences of the user, >
 	:endif
 <
 
- vim:tw=78:sw=4:ts=8:ft=help:norl:
+ vim:tw=78:sw=4:ts=8:noet:ft=help:norl:

runtime/doc/motion.txt

@@ -1025,7 +1025,7 @@ remembered.  You can return to that position with the "''" and "``" command,
 unless the line containing that position was changed or deleted.  The
 following commands are "jump" commands: "'", "`", "G", "/", "?", "n", "N",
 "%", "(", ")", "[[", "]]", "{", "}", ":s", ":tag", "L", "M", "H" and the
-commands that start editing a new file. 
+commands that start editing a new file.
 
 							*CTRL-O*
 CTRL-O			Go to [count] Older cursor position in jump list
@@ -1164,7 +1164,7 @@ remembered.
 							*:changes*
 :changes		Print the change list.  A ">" character indicates the
 			current position.  Just after a change it is below the
-			newest entry, indicating that "g;" takes you to the
+			newest entry, indicating that `g;` takes you to the
 			newest entry position.  The first column indicates the
 			count needed to take you to this position.  Example:
 
@@ -1174,8 +1174,8 @@ remembered.
 				    1    14   54 the latest changed line
 				>
 
-			The "3g;" command takes you to line 9.  Then the
-			output of ":changes is:
+			The `3g;` command takes you to line 9.  Then the
+			output of `:changes` is:
 
 				change line  col text ~
 				>   0     9    8 bla bla bla
@@ -1341,4 +1341,4 @@ L			To line [count] from bottom of window (default: Last
 			position is in a status line, that window is made the
 			active window and the cursor is not moved.  {not in Vi}
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/netbeans.txt

@@ -1007,4 +1007,4 @@ Expert tab MIME Type property.  NetBeans is MIME oriented and the External
 Editor will only open MIME types specified in this property.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.1.  Last change: 2018 May 15
+*options.txt*	For Vim version 8.1.  Last change: 2018 Dec 18
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -120,10 +120,10 @@ and the following arguments will be ignored.
 When 'verbose' is non-zero, displaying an option value will also tell where it
 was last set.  Example: >
 	:verbose set shiftwidth cindent?
-<	  shiftwidth=4 ~
-		  Last set from modeline ~
-	  cindent ~
-		  Last set from /usr/local/share/vim/vim60/ftplugin/c.vim ~
+<  shiftwidth=4 ~
+	  Last set from modeline line 1 ~
+  cindent ~
+	  Last set from /usr/local/share/vim/vim60/ftplugin/c.vim line 30 ~
 This is only done when specific option values are requested, not for ":verbose
 set all" or ":verbose set" without an argument.
 When the option was set by hand there is no "Last set" message.
@@ -132,7 +132,7 @@ autocommand, the script in which it was defined is reported.
 Note that an option may also have been set as a side effect of setting
 'compatible'.
 A few special texts:
-	Last set from modeline ~
+	Last set from modeline line 1 ~
 		Option was set in a |modeline|.
 	Last set from --cmd argument ~
 		Option was set with command line argument |--cmd| or +.
@@ -846,6 +846,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'{A-Z0-9}, or `{A-Z0-9} command takes one to another file.
 	Note that for some commands the 'autowrite' option is not used, see
 	'autowriteall' for that.
+	Some buffers will not be written, specifically when 'buftype' is
+	"nowrite", "nofile", "terminal" or "prompt".
 
 			 *'autowriteall'* *'awa'* *'noautowriteall'* *'noawa'*
 'autowriteall' 'awa'	boolean	(default off)
@@ -1054,6 +1056,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 	  name, precede it with a backslash.
 	- To include a comma in a directory name precede it with a backslash.
 	- A directory name may end in an '/'.
+	- For Unix and Win32, if a directory ends in two path separators "//",
+	  the backup file name will be built from the complete path to the
+	  file with all path separators changed to percent '%' signs. This
+	  will ensure file name uniqueness in the backup directory.
+	  On Win32, it is also possible to end with "\\".  However, When a
+	  separating comma is following, you must use "//", since "\\" will
+	  include the comma in the file name. Therefore it is recommended to
+	  use '//', instead of '\\'.
 	- Environment variables are expanded |:set_env|.
 	- Careful with '\' characters, type one before a space, type two to
 	  get one in the option (see |option-backslash|), for example: >
@@ -1628,10 +1638,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 			area extended, Vim tries to become the owner of the
 			windowing system's global selection or put the
 			selected text on the clipboard used by the selection
-			register "*.  See |guioptions_a| and |quotestar| for
-			details.  When the GUI is active, the 'a' flag in
-			'guioptions' is used, when the GUI is not active, this
-			"autoselect" flag is used.
+			register "*.  See |'go-a'| and |quotestar| for details.
+			When the GUI is active, the 'a' flag in 'guioptions'
+			is used, when the GUI is not active, this "autoselect"
+			flag is used.
 			Also applies to the modeless selection.
 
 						*clipboard-autoselectplus*
@@ -1989,8 +1999,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	displayed.  E.g., when moving vertically it may change column.
 
 
-'conceallevel' 'cole'		*'conceallevel'* *'cole'*
-			number (default 0)
+						*'conceallevel'* *'cole'*
+'conceallevel' 'cole'	number (default 0)
 			local to window
 			{not in Vi}
 			{not available when compiled without the |+conceal|
@@ -2087,10 +2097,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 			See also |map_bar|.
 								*cpo-B*
 		B	A backslash has no special meaning in mappings,
-			abbreviations and the "to" part of the menu commands.
-			Remove this flag to be able to use a backslash like a
-			CTRL-V.  For example, the command ":map X \<Esc>"
-			results in X being mapped to:
+			abbreviations, user commands and the "to" part of the
+			menu commands.  Remove this flag to be able to use a
+			backslash like a CTRL-V.  For example, the command
+			":map X \<Esc>" results in X being mapped to:
 				'B' included:	"\^["	 (^[ is a real <Esc>)
 				'B' excluded:	"<Esc>"  (5 characters)
 				('<' excluded in both cases)
@@ -2360,7 +2370,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 
 						*'cryptmethod'* *'cm'*
-'cryptmethod' 'cm'	string	(default "zip")
+'cryptmethod' 'cm'	string	(default "blowfish2")
 			global or local to buffer |global-local|
 			{not in Vi}
 	Method used for encryption when the buffer is written to a file:
@@ -2391,8 +2401,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	modifications.  Also see |:X|.
 
 	When setting the global value to an empty string, it will end up with
-	the value "zip".  When setting the local value to an empty string the
-	buffer will use the global value.
+	the value "blowfish2".  When setting the local value to an empty
+	string the buffer will use the global value.
 
 	When a new encryption method is added in a later version of Vim, and
 	the current version does not recognize it, you will get	*E821* .
@@ -2599,13 +2609,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 			{not available when compiled without the |+diff|
 			feature}
-	Expression which is evaluated to obtain an ed-style diff file from two
-	versions of a file.  See |diff-diffexpr|.
+	Expression which is evaluated to obtain a diff file (either ed-style
+	or unified-style) from two versions of a file.  See |diff-diffexpr|.
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
 						*'dip'* *'diffopt'*
-'diffopt' 'dip'		string	(default "filler")
+'diffopt' 'dip'		string	(default "internal,filler")
 			global
 			{not in Vi}
 			{not available when compiled without the |+diff|
@@ -2624,6 +2634,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 				When omitted a context of six lines is used.
 				See |fold-diff|.
 
+		iblank		Ignore changes where lines are all blank.  Adds
+				the "-B" flag to the "diff" command if
+				'diffexpr' is empty.  Check the documentation
+				of the "diff" command for what this does
+				exactly.
+				NOTE: the diff windows will get out of sync,
+				because no differences between blank lines are
+				taken into account.
+
 		icase		Ignore changes in case of text.  "a" and "A"
 				are considered the same.  Adds the "-i" flag
 				to the "diff" command if 'diffexpr' is empty.
@@ -2635,6 +2654,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 				exactly.  It should ignore adding trailing
 				white space, but not leading white space.
 
+		iwhiteall	Ignore all white space changes.  Adds
+				the "-w" flag to the "diff" command if
+				'diffexpr' is empty.  Check the documentation
+				of the "diff" command for what this does
+				exactly.
+
+		iwhiteeol	Ignore white space changes at end of line.
+				Adds the "-Z" flag to the "diff" command if
+				'diffexpr' is empty.  Check the documentation
+				of the "diff" command for what this does
+				exactly.
+
 		horizontal	Start diff mode with horizontal splits (unless
 				explicitly specified otherwise).
 
@@ -2647,11 +2678,31 @@ A jump table for the options with a short description can be found at |Q_op|.
 		foldcolumn:{n}	Set the 'foldcolumn' option to {n} when
 				starting diff mode.  Without this 2 is used.
 
-	Examples: >
+		internal	Use the internal diff library.  This is
+				ignored when 'diffexpr' is set.  *E960*
+				When running out of memory when writing a
+				buffer this item will be ignored for diffs
+				involving that buffer.  Set the 'verbose'
+				option to see when this happens.
 
-		:set diffopt=filler,context:4
+		indent-heuristic
+				Use the indent heuristic for the internal
+				diff library.
+
+                algorithm:{text} Use the specified diff algorithm with the
+				internal diff engine. Currently supported
+				algorithms are:
+				myers      the default algorithm
+				minimal    spend extra time to generate the
+					   smallest possible diff
+				patience   patience diff algorithm
+				histogram  histogram diff algorithm
+
+	Examples: >
+		:set diffopt=internal,filler,context:4
 		:set diffopt=
-		:set diffopt=filler,foldcolumn:3
+		:set diffopt=internal,filler,foldcolumn:3
+		:set diffopt-=internal  " do NOT use the internal diff parser
 <
 				     *'digraph'* *'dg'* *'nodigraph'* *'nodg'*
 'digraph' 'dg'		boolean	(default off)
@@ -2680,12 +2731,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 	- A directory starting with "./" (or ".\" for MS-DOS et al.) means to
 	  put the swap file relative to where the edited file is.  The leading
 	  "." is replaced with the path name of the edited file.
-	- For Unix and Win32, if a directory ends in two path separators "//"
-	  or "\\", the swap file name will be built from the complete path to
-	  the file with all path separators substituted to percent '%' signs.
-	  This will ensure file name uniqueness in the preserve directory.
-	  On Win32, when a separating comma is following, you must use "//",
-	  since "\\" will include the comma in the file name.
+	- For Unix and Win32, if a directory ends in two path separators "//",
+	  the swap file name will be built from the complete path to the file
+	  with all path separators substituted to percent '%' signs. This will
+	  ensure file name uniqueness in the preserve directory.
+	  On Win32, it is also possible to end with "\\".  However, When a
+	  separating comma is following, you must use "//", since "\\" will
+	  include the comma in the file name. Therefore it is recommended to
+	  use '//', instead of '\\'.
 	- Spaces after the comma are ignored, other spaces are considered part
 	  of the directory name.  To have a space at the start of a directory
 	  name, precede it with a backslash.
@@ -3842,8 +3895,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	screen.
 
 						*'guioptions'* *'go'*
-'guioptions' 'go'	string	(default "egmrLtT"   (MS-Windows, "t" is
-						   removed in |defaults.vim|),
+'guioptions' 'go'	string	(default "egmrLtT"   (MS-Windows,
+					   "t" is removed in |defaults.vim|),
 					 "aegimrLtT" (GTK, Motif and Athena),
 					 )
 			global
@@ -3863,7 +3916,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 		terminal to list the command output.
 		The terminal window will be positioned at the bottom, and grow
 		upwards as needed.
-							*guioptions_a* *'go-a'*
+								*'go-a'*
 	  'a'	Autoselect:  If present, then whenever VISUAL mode is started,
 		or the Visual area extended, Vim tries to become the owner of
 		the windowing system's global selection.  This means that the
@@ -4080,11 +4133,12 @@ A jump table for the options with a short description can be found at |Q_op|.
 				     l:Search,m:MoreMsg,M:ModeMsg,n:LineNr,
 				     N:CursorLineNr,r:Question,s:StatusLine,
 				     S:StatusLineNC,c:VertSplit,t:Title,
-				     v:Visual,w:WarningMsg,W:WildMenu,f:Folded,
-				     F:FoldColumn,A:DiffAdd,C:DiffChange,
-				     D:DiffDelete,T:DiffText,>:SignColumn,
-				     B:SpellBad,P:SpellCap,R:SpellRare,
-				     L:SpellLocal,-:Conceal,+:Pmenu,=:PmenuSel,
+				     v:Visual,V:VisualNOS,w:WarningMsg,
+				     W:WildMenu,f:Folded,F:FoldColumn,
+				     A:DiffAdd,C:DiffChange,D:DiffDelete,
+				     T:DiffText,>:SignColumn,-:Conceal,
+ 				     B:SpellBad,P:SpellCap,R:SpellRare,
+				     L:SpellLocal,+:Pmenu,=:PmenuSel,
 				     x:PmenuSbar,X:PmenuThumb,*:TabLine,
 				     #:TabLineSel,_:TabLineFill,!:CursorColumn,
 				     .:CursorLine,o:ColorColumn,q:QuickFixLine,
@@ -4129,16 +4183,16 @@ A jump table for the options with a short description can be found at |Q_op|.
 	|hl-DiffDelete|	 D  deleted line in diff mode
 	|hl-DiffText|	 T  inserted text in diff mode
 	|hl-SignColumn|	 >  column used for |signs|
+	|hl-Conceal|	 -  the placeholders used for concealed characters
+			    (see 'conceallevel')
 	|hl-SpellBad|	 B  misspelled word |spell|
 	|hl-SpellCap|	 P  word that should start with capital |spell|
 	|hl-SpellRare|	 R  rare word |spell|
 	|hl-SpellLocal|	 L  word from other region |spell|
-	|hl-Conceal|	 -  the placeholders used for concealed characters
-			    (see 'conceallevel')
-	|hl-Pmenu|       +  popup menu normal line
-	|hl-PmenuSel|    =  popup menu normal line
-	|hl-PmenuSbar|   x  popup menu scrollbar
-	|hl-PmenuThumb|  X  popup menu scrollbar thumb
+	|hl-Pmenu|	 +  popup menu normal line
+	|hl-PmenuSel|	 =  popup menu selected line
+	|hl-PmenuSbar|	 x  popup menu scrollbar
+	|hl-PmenuThumb|	 X  popup menu scrollbar thumb
 
 	The display modes are:
 		r	reverse		(termcap entry "mr" and "me")
@@ -4363,7 +4417,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	methods.  Use 'imdisable' to disable XIM then.
 
 	You can set 'imactivatefunc' and 'imstatusfunc' to handle IME/XIM
-	via external command if vim is not compiled with the |+xim|,
+	via external command if Vim is not compiled with the |+xim|,
 	|+multi_byte_ime| or |global-ime|.
 
 						*'imsearch'* *'ims'*
@@ -4470,7 +4524,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	so far, matches.  The matched string is highlighted.  If the pattern
 	is invalid or not found, nothing is shown.  The screen will be updated
 	often, this is only useful on fast terminals.
-	Note that the match will be shown, but the cursor will return to its
+	Also applies to the pattern in commands: >
+		:global
+		:lvimgrep
+		:lvimgrepadd
+		:smagic
+		:snomagic
+		:sort
+		:substitute
+		:vglobal
+		:vimgrep
+		:vimgrepadd
+<	Note that the match will be shown, but the cursor will return to its
 	original position when no match is found and when pressing <Esc>.  You
 	still need to finish the search command with <Enter> to move the
 	cursor to the match.
@@ -4483,9 +4548,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The highlighting can be set with the 'i' flag in 'highlight'.
 	When 'hlsearch' is on, all matched strings are highlighted too while
 	typing a search command. See also: 'hlsearch'.
-	If you don't want turn 'hlsearch' on, but want to highlight all matches
-	while searching, you can turn on and off 'hlsearch' with autocmd.
-	Example: >
+	If you don't want to turn 'hlsearch' on, but want to highlight all
+	matches while searching, you can turn on and off 'hlsearch' with
+	autocmd.  Example: >
 		augroup vimrc-incsearch-highlight
 		  autocmd!
 		  autocmd CmdlineEnter /,\? :set hlsearch
@@ -4655,7 +4720,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Identifiers are used in recognizing environment variables and after a
 	match of the 'define' option.  It is also used for "\i" in a
 	|pattern|.  See 'isfname' for a description of the format of this
-	option.
+	option.  For '@' only characters up to 255 are used.
 	Careful: If you change this option, it might break expanding
 	environment variables.  E.g., when '/' is included and Vim tries to
 	expand "$HOME/.viminfo".  Maybe you should change 'iskeyword' instead.
@@ -4669,8 +4734,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	Keywords are used in searching and recognizing with many commands:
 	"w", "*", "[i", etc.  It is also used for "\k" in a |pattern|.  See
-	'isfname' for a description of the format of this option.  For C
-	programs you could use "a-z,A-Z,48-57,_,.,-,>".
+	'isfname' for a description of the format of this option.  For '@'
+	characters above 255 check the "word" character class.
+	For C programs you could use "a-z,A-Z,48-57,_,.,-,>".
 	For a help file it is set to all non-blank printable characters except
 	'*', '"' and '|' (so that CTRL-] on a command finds the help for that
 	command).
@@ -5381,7 +5447,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 		h	all previous modes when editing a help file
 		a	all previous modes
 		r	for |hit-enter| and |more-prompt| prompt
-	Normally you would enable the mouse in all four modes with: >
+	Normally you would enable the mouse in all five modes with: >
 		:set mouse=a
 <	When the mouse is not enabled, the GUI will still use the mouse for
 	modeless selection.  This doesn't move the text cursor.
@@ -5903,7 +5969,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	security reasons.
 
 						*'printencoding'* *'penc'*
-'printencoding' 'penc'	String	(default empty, except for some systems)
+'printencoding' 'penc'	string	(default empty, except for some systems)
 			global
 			{not in Vi}
 			{only available when compiled with the |+printer|
@@ -5912,7 +5978,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	See |penc-option|.
 
 						*'printexpr'* *'pexpr'*
-'printexpr' 'pexpr'	String	(default: see below)
+'printexpr' 'pexpr'	string	(default: see below)
 			global
 			{not in Vi}
 			{only available when compiled with the |+printer|
@@ -6640,7 +6706,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   tabpages	all tab pages; without this only the current tab page
 			is restored, so that you can make a session for each
 			tab page separately
-	   terminal	include terminal windows where the command can be restored
+	   terminal	include terminal windows where the command can be
+			restored
 	   unix		with Unix end-of-line format (single <NL>), even when
 			on Windows or DOS
 	   winpos	position of the whole Vim window
@@ -6676,7 +6743,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Example with escaped space (Vim will do this when initializing the
 	option from $SHELL): >
 		:set shell=/bin/with\\\ space/sh
-<	The resulting value of 'shell' is  "/bin/with\ space/sh", two
+<	The resulting value of 'shell' is "/bin/with\ space/sh", two
 	backslashes are consumed by `:set`.
 
 	Under MS-Windows, when the executable ends in ".com" it must be
@@ -7273,8 +7340,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 	After this option has been set successfully, Vim will source the files
 	"spell/LANG.vim" in 'runtimepath'.  "LANG" is the value of 'spelllang'
-	up to the first comma, dot or underscore.
-	Also see |set-spc-auto|.
+	up to the first character that is not an ASCII letter or number and
+	not a dash.  Also see |set-spc-auto|.
 
 
 						*'spellsuggest'* *'sps'*
@@ -7502,7 +7569,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	line is displayed.  The current buffer and current window will be set
 	temporarily to that of the window (and buffer) whose statusline is
 	currently being drawn.  The expression will evaluate in this context.
-	The variable "actual_curbuf" is set to the 'bufnr()' number of the
+	The variable "g:actual_curbuf" is set to the `bufnr()` number of the
 	real current buffer.
 
 	The 'statusline' option will be evaluated in the |sandbox| if set from
@@ -8054,13 +8121,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global or local to buffer |global-local|
 			{not in Vi}
 	List of file names, separated by commas, that are used to lookup words
-	for thesaurus completion commands |i_CTRL-X_CTRL-T|.  Each line in
-	the file should contain words with similar meaning, separated by
-	non-keyword characters (white space is preferred).  Maximum line
-	length is 510 bytes.
-	To obtain a file to be used here, check out this ftp site:
-	[Sorry this link doesn't work anymore, do you know the right one?]
-	ftp://ftp.ox.ac.uk/pub/wordlists/  First get the README file.
+	for thesaurus completion commands |i_CTRL-X_CTRL-T|.
+
+	Each line in the file should contain words with similar meaning,
+	separated by non-keyword characters (white space is preferred).
+	Maximum line length is 510 bytes.
+
+	An English word list was added to this github issue:
+	https://github.com/vim/vim/issues/629#issuecomment-443293282
+	Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
+	~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file
+	name.
+
 	To include a comma in a file name precede it with a backslash.  Spaces
 	after a comma are ignored, otherwise spaces are included in the file
 	name.  See |option-backslash| about using backslashes.
@@ -8365,8 +8437,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	|t_RV| is set to the escape sequence to request the xterm version
 	number, more intelligent detection process runs.
 	The "xterm2" value will be set if the xterm version is reported to be
-	from 95 to 276.  The "sgr" value will be set if the xterm version is
-	277 or higher and when Vim detects Mac Terminal.app or iTerm2.
+	from 95 to 276.  The "sgr" value will be set if Vim detects Mac
+	Terminal.app, iTerm2 or mintty, and when the xterm version is 277 or
+	higher.
 	If you do not want 'ttymouse' to be set to "xterm2" or "sgr"
 	automatically, set t_RV to an empty string: >
 		:set t_RV=
@@ -9204,4 +9277,4 @@ A jump table for the options with a short description can be found at |Q_op|.
 	screen.  When non-zero, characters are sent to the terminal one by
 	one.  For MS-DOS pcterm this does not work.  For debugging purposes.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_390.txt

@@ -83,10 +83,10 @@ There is no solution for this yet.
   ctags out there, that does it right, but we can't be sure.  So this seems to
   be a permanent restriction.
 
-- The cscope interface (|cscope|) doesn't work for the version of cscope
-  that we use on our mainframe.  We have a copy of version 15.0b12, and it
-  causes Vim to hang when using the "cscope add" command.  I'm guessing that
-  the binary format of the cscope database isn't quite what Vim is expecting.
+- The cscope interface (|cscope|) doesn't work for the version of cscope that
+  we use on our mainframe.  We have a copy of version 15.0b12, and it causes
+  Vim to hang when using the "cscope add" command.  I'm guessing that the
+  binary format of the cscope database isn't quite what Vim is expecting.
   I've tried to port the current version of cscope (15.3) to z/OS, without
   much success.  If anyone is interested in trying, drop me a line if you
   make any progress.
@@ -131,4 +131,4 @@ Also look at:
 
 
 ------------------------------------------------------------------------------
- vim:tw=78:fo=tcq2:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_amiga.txt

@@ -144,4 +144,4 @@ Installation ~
 	;End VIM
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_beos.txt

@@ -317,4 +317,4 @@ it is about 1191K.
 <rhialto@polder.ubc.kun.nl>
 http://polder.ubc.kun.nl/~rhialto/be
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_dos.txt

@@ -295,4 +295,4 @@ When starting up, Vim checks for the presence of "sh" anywhere in the 'shell'
 option.  If it is present, Vim sets the 'shellcmdflag' and 'shellquote' or
 'shellxquote' options will be set as described above.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_mac.txt

@@ -179,4 +179,4 @@ the system clipboard, the darwin feature should be disabled to prevent Vim
 from hanging at runtime.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_mint.txt

@@ -36,4 +36,4 @@ Send bug reports to
 
 	Jens M. Felderhoff, e-mail: <jmf@infko.uni-koblenz.de>
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_msdos.txt

@@ -12,4 +12,4 @@ work, there is not enough memory.  The DOS32 version (using DJGPP) might still
 work on older systems.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_os2.txt

@@ -10,4 +10,4 @@ This file used to contain the particularities for the OS/2 version of Vim.
 The OS/2 support was removed in patch 7.4.1008.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_qnx.txt

@@ -135,4 +135,4 @@ Todo:
 	- Replace usage of fork() with spawn() when launching external
 	  programs.
 
- vim:tw=78:sw=4:ts=8:ts=8:ft=help:norl:
+ vim:tw=78:sw=4:ts=8:noet:ft=help:norl:

runtime/doc/os_risc.txt

@@ -9,4 +9,4 @@ The RISC OS support has been removed from Vim with patch 7.3.187.
 If you would like to use Vim on RISC OS get the files from before that patch.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_unix.txt

@@ -57,4 +57,4 @@ For real color terminals the ":highlight" command can be used.
 The file "tools/vim132" is a shell script that can be used to put Vim in 132
 column mode on a vt100 and lookalikes.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_vms.txt

@@ -952,4 +952,4 @@ of OS_VMS.TXT:
 	Bruce Hunsaker <BNHunsaker@chq.byu.edu>
 	Sandor Kopanyi <sandor.kopanyi@mailbox.hu>
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_win32.txt

@@ -303,4 +303,4 @@ A. Yes, place your favorite icon in bitmaps/vim.ico in a directory of
    'runtimepath'.  For example ~/vimfiles/bitmaps/vim.ico.
 
 
- vim:tw=78:fo=tcq2:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/pattern.txt

@@ -293,6 +293,14 @@ the "#" is under your left hand middle finger (search to the left and up) and
 the "*" is under your right hand middle finger (search to the right and down).
 (this depends on your keyboard layout though).
 
+								*E956*
+In very rare cases a regular expression is used recursively.  This can happen
+when executing a pattern takes a long time and when checking for messages on
+channels a callback is invoked that also uses a pattern or an autocommand is
+triggered.  In most cases this should be fine, but if a pattern is in use when
+it's used again it fails.  Usually this means there is something wrong with
+the pattern.
+
 ==============================================================================
 2. The definition of a pattern		*search-pattern* *pattern* *[pattern]*
 					*regular-expression* *regexp* *Pattern*
@@ -1409,4 +1417,4 @@ Finally, these constructs are unique to Perl:
 		":2match" for another plugin.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/pi_getscript.txt

@@ -479,4 +479,4 @@ v2  May 14, 2003 :   extracts name of item to be obtained from the
                      and they became numbers.  Fixes comparison.
 
 ==============================================================================
-vim:tw=78:ts=8:ft=help:fdm=marker
+vim:tw=78:ts=8:noet:ft=help:fdm=marker

runtime/doc/pi_gzip.txt

@@ -40,4 +40,4 @@ compression.  Thus editing the patchmode file will not give you the automatic
 decompression.  You have to rename the file if you want this.
 
 ==============================================================================
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/pi_logipat.txt

@@ -118,4 +118,4 @@ Copyright: (c) 2004-2015 by Charles E. Campbell	*logiPat-copyright*
 
 
 ==============================================================================
-vim:tw=78:ts=8:ft=help
+vim:tw=78:ts=8:noet:ft=help

runtime/doc/pi_netrw.txt

@@ -4267,4 +4267,4 @@ netrw:
 
 ==============================================================================
 Modelines: {{{1
- vim:tw=78:ts=8:ft=help:norl:fdm=marker
+ vim:tw=78:ts=8:noet:ft=help:norl:fdm=marker

runtime/doc/pi_paren.txt

@@ -57,4 +57,4 @@ comments.  This is unrelated to the matchparen highlighting, they use a
 different mechanism.
 
 ==============================================================================
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/pi_spec.txt

@@ -108,4 +108,4 @@ If you don't like the release updating feature and don't want to answer
 
 Good luck!!
 
-vim:tw=78:ts=8:ft=help:norl:
+vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/pi_tar.txt

@@ -148,4 +148,4 @@ Copyright 2005-2012:					*tar-copyright*
    v1 (original)   * Michael Toren (see http://michael.toren.net/code/)
 
 ==============================================================================
-vim:tw=78:ts=8:ft=help
+vim:tw=78:ts=8:noet:ft=help