patch 8.1.2330: vi' does not always work when 'selection' is exclusive

Problem:    vi' does not always work when 'selection' is exclusive.
Solution:   Adjust start position.

.gitattributes

@@ -0,0 +1 @@
+src/testdir/test42.in diff

.gitignore

@@ -77,6 +77,7 @@ src/testdir/messages
 src/testdir/viminfo
 src/testdir/opt_test.vim
 runtime/indent/testdir/*.out
+runtime/indent/testdir/*.fail
 src/memfile_test
 src/json_test
 src/message_test

.travis.yml

@@ -142,7 +142,10 @@ script:
       "${SRCDIR}"/vim --not-a-term -u NONE -S "${SRCDIR}"/testdir/if_ver-2.vim -c quit > /dev/null
       cat if_ver.txt
     fi
-  - do_test make ${SHADOWOPT} ${TEST} && FOLD_MARKER=travis_fold
+  - >
+    do_test make ${SHADOWOPT} ${TEST} &&
+    make -C runtime/doc vimtags VIMEXE=../../"${SRCDIR}"/vim &&
+    FOLD_MARKER=travis_fold
   - echo -en "${FOLD_MARKER}:end:test\\r\\033[0K"
 
 

CONTRIBUTING.md

@@ -65,6 +65,9 @@ If the maintainer does not respond, contact the vim-dev maillist.
 
 # Translations
 
+Translations of this CONTRIBUTING file:
+[Korean](https://github.com/cjw1359/opensource/blob/master/Vim/CONTRIBUTING_ko.md)
+
 Translating messages and runtime files is very much appreciated!  These things
 can be translated:
 *   Messages in Vim, see [src/po/README.txt][1]

Filelist

@@ -4,6 +4,7 @@
 # source files for all source archives
 SRC_ALL =	\
 		.gitignore \
+		.gitattributes \
 		.hgignore \
 		.lgtm.yml \
 		.travis.yml \
@@ -21,9 +22,11 @@ SRC_ALL =	\
 		src/blob.c \
 		src/blowfish.c \
 		src/buffer.c \
+		src/bufwrite.c \
 		src/change.c \
 		src/channel.c \
 		src/charset.c \
+		src/cindent.c \
 		src/cmdexpand.c \
 		src/cmdhist.c \
 		src/crypt.c \
@@ -32,6 +35,8 @@ SRC_ALL =	\
 		src/dict.c \
 		src/diff.c \
 		src/digraph.c \
+		src/drawline.c \
+		src/drawscreen.c \
 		src/edit.c \
 		src/eval.c \
 		src/evalbuffer.c \
@@ -78,6 +83,7 @@ SRC_ALL =	\
 		src/message_test.c \
 		src/misc1.c \
 		src/misc2.c \
+		src/mouse.c \
 		src/move.c \
 		src/mysign \
 		src/nbdebug.c \
@@ -87,7 +93,9 @@ SRC_ALL =	\
 		src/ops.c \
 		src/option.c \
 		src/option.h \
-		src/popupmnu.c \
+		src/optiondefs.h \
+		src/optionstr.c \
+		src/popupmenu.c \
 		src/popupwin.c \
 		src/profiler.c \
 		src/quickfix.c \
@@ -95,6 +103,7 @@ SRC_ALL =	\
 		src/regexp_bt.c \
 		src/regexp_nfa.c \
 		src/regexp.h \
+		src/register.c \
 		src/scriptfile.c \
 		src/screen.c \
 		src/search.c \
@@ -105,6 +114,7 @@ SRC_ALL =	\
 		src/spell.c \
 		src/spell.h \
 		src/spellfile.c \
+		src/spellsuggest.c \
 		src/structs.h \
 		src/syntax.c \
 		src/tag.c \
@@ -179,9 +189,11 @@ SRC_ALL =	\
 		src/proto/blob.pro \
 		src/proto/blowfish.pro \
 		src/proto/buffer.pro \
+		src/proto/bufwrite.pro \
 		src/proto/change.pro \
 		src/proto/channel.pro \
 		src/proto/charset.pro \
+		src/proto/cindent.pro \
 		src/proto/cmdexpand.pro \
 		src/proto/cmdhist.pro \
 		src/proto/crypt.pro \
@@ -190,6 +202,8 @@ SRC_ALL =	\
 		src/proto/dict.pro \
 		src/proto/diff.pro \
 		src/proto/digraph.pro \
+		src/proto/drawline.pro \
+		src/proto/drawscreen.pro \
 		src/proto/edit.pro \
 		src/proto/eval.pro \
 		src/proto/evalbuffer.pro \
@@ -225,16 +239,19 @@ SRC_ALL =	\
 		src/proto/message.pro \
 		src/proto/misc1.pro \
 		src/proto/misc2.pro \
+		src/proto/mouse.pro \
 		src/proto/move.pro \
 		src/proto/netbeans.pro \
 		src/proto/normal.pro \
 		src/proto/ops.pro \
 		src/proto/option.pro \
-		src/proto/popupmnu.pro \
+		src/proto/optionstr.pro \
+		src/proto/popupmenu.pro \
 		src/proto/popupwin.pro \
 		src/proto/profiler.pro \
 		src/proto/quickfix.pro \
 		src/proto/regexp.pro \
+		src/proto/register.pro \
 		src/proto/scriptfile.pro \
 		src/proto/screen.pro \
 		src/proto/search.pro \
@@ -244,6 +261,7 @@ SRC_ALL =	\
 		src/proto/sound.pro \
 		src/proto/spell.pro \
 		src/proto/spellfile.pro \
+		src/proto/spellsuggest.pro \
 		src/proto/syntax.pro \
 		src/proto/tag.pro \
 		src/proto/term.pro \
@@ -283,7 +301,7 @@ SRC_ALL =	\
 		src/libvterm/src/parser.c \
 		src/libvterm/src/pen.c \
 		src/libvterm/src/rect.h \
-		src/libvterm/src/termscreen.c \
+		src/libvterm/src/screen.c \
 		src/libvterm/src/state.c \
 		src/libvterm/src/unicode.c \
 		src/libvterm/src/utf8.h \
@@ -383,7 +401,6 @@ SRC_UNIX =	\
 		src/gui_xmebwp.h \
 		src/gui_x11.c \
 		src/gui_x11_pm.h \
-		src/hangulin.c \
 		src/if_xcmdsrv.c \
 		src/link.sh \
 		src/installman.sh \
@@ -403,7 +420,6 @@ SRC_UNIX =	\
 		src/proto/gui_motif.pro \
 		src/proto/gui_xmdlg.pro \
 		src/proto/gui_x11.pro \
-		src/proto/hangulin.pro \
 		src/proto/if_xcmdsrv.pro \
 		src/proto/os_unix.pro \
 		src/proto/pty.pro \
@@ -504,7 +520,7 @@ SRC_DOS =	\
 		src/testdir/Make_dos.mak \
 		src/testdir/Make_ming.mak \
 		src/testdir/dos.vim \
-		src/uninstal.c \
+		src/uninstall.c \
 		src/vim.def \
 		src/vim.rc \
 		src/vimio.h \
@@ -519,7 +535,7 @@ SRC_DOS =	\
 		nsis/gvim_version.nsh \
 		nsis/README.txt \
 		nsis/lang/*.nsi \
-		uninstal.txt \
+		uninstall.txt \
 		src/VisVim/Commands.cpp \
 		src/VisVim/Commands.h \
 		src/VisVim/DSAddIn.cpp \
@@ -645,6 +661,7 @@ RT_ALL =	\
 		runtime/doc/*.txt \
 		runtime/doc/Makefile \
 		runtime/doc/doctags.c \
+		runtime/doc/doctags.vim \
 		runtime/doc/test_urls.vim \
 		runtime/doc/vim.1 \
 		runtime/doc/evim.1 \
@@ -839,7 +856,7 @@ BIN_AMI =	\
 # files for DOS binary (also in extra archive)
 BIN_DOS =	\
 		README_bindos.txt \
-		uninstal.txt \
+		uninstall.txt \
 
 # files for Win32 OLE binary (also in extra archive)
 BIN_OLE =	\

Makefile

@@ -165,7 +165,7 @@ MINOR = 1
 #           xxd/xxd.exe to xxdw32.exe
 #           vim.pdb to vimw32.pdb
 #           install.exe to installw32.exe
-#           uninstal.exe to uninstalw32.exe
+#           uninstall.exe to uninstallw32.exe
 # Win32 GUI version build:
 # - > cd src
 #   > nmake -f Make_mvc.mak GUI=yes
@@ -175,7 +175,7 @@ MINOR = 1
 # - move "gvim.exe" to here (otherwise the OLE version will overwrite it).
 # - Move gvim.pdb to here.
 # - Copy "GvimExt/gvimext.dll" to here.
-# - Delete vimrun.exe, install.exe and uninstal.exe.
+# - Delete vimrun.exe, install.exe and uninstall.exe.
 # Win32 GUI version with OLE, PERL, Ruby, TCL, PYTHON and dynamic IME:
 # - Install the interfaces you want, see src/INSTALLpc.txt
 #   Adjust bigvim.bat to match the version of each interface you want.
@@ -188,7 +188,7 @@ MINOR = 1
 #   - check the output.
 # - Rename "gvim.exe" to "gvim_ole.exe".
 # - Rename gvim.pdb to "gvim_ole.pdb".
-# - Delete install.exe and uninstal.exe.
+# - Delete install.exe and uninstall.exe.
 # Create the archives:
 # - Copy all the "*.exe" files to where this Makefile is.
 # - Copy all the "*.pdb" files to where this Makefile is.
@@ -197,7 +197,7 @@ MINOR = 1
 # NSIS self installing exe:
 # - To get NSIS see http://nsis.sourceforge.net
 # - Make sure gvim_ole.exe, vimw32.exe, installw32.exe,
-#   uninstalw32.exe, teew32.exe and xxdw32.exe have been build as mentioned
+#   uninstallw32.exe, teew32.exe and xxdw32.exe have been build as mentioned
 #   above.
 # - copy these files (get them from a binary archive or build them):
 #	gvimext.dll in src/GvimExt
@@ -518,7 +518,7 @@ dosbin_gvim: dist no_title.vim dist/$(COMMENT_GVIM)
 	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
 	cp vimrun.exe dist/vim/$(VIMRTDIR)/vimrun.exe
 	cp installw32.exe dist/vim/$(VIMRTDIR)/install.exe
-	cp uninstalw32.exe dist/vim/$(VIMRTDIR)/uninstal.exe
+	cp uninstallw32.exe dist/vim/$(VIMRTDIR)/uninstall.exe
 	mkdir dist/vim/$(VIMRTDIR)/GvimExt32
 	cp gvimext.dll dist/vim/$(VIMRTDIR)/GvimExt32/gvimext.dll
 	mkdir dist/vim/$(VIMRTDIR)/GvimExt64
@@ -539,7 +539,7 @@ dosbin_w32: dist no_title.vim dist/$(COMMENT_W32)
 	cp teew32.exe dist/vim/$(VIMRTDIR)/tee.exe
 	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
 	cp installw32.exe dist/vim/$(VIMRTDIR)/install.exe
-	cp uninstalw32.exe dist/vim/$(VIMRTDIR)/uninstal.exe
+	cp uninstallw32.exe dist/vim/$(VIMRTDIR)/uninstall.exe
 	cd dist && zip -9 -rD -z vim$(VERSION)w32.zip vim <$(COMMENT_W32)
 	cp vimw32.pdb dist/vim$(VERSION)w32.pdb
 
@@ -557,7 +557,7 @@ dosbin_ole: dist no_title.vim dist/$(COMMENT_OLE)
 	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
 	cp vimrun.exe dist/vim/$(VIMRTDIR)/vimrun.exe
 	cp installw32.exe dist/vim/$(VIMRTDIR)/install.exe
-	cp uninstalw32.exe dist/vim/$(VIMRTDIR)/uninstal.exe
+	cp uninstallw32.exe dist/vim/$(VIMRTDIR)/uninstall.exe
 	cp gvimext.dll dist/vim/$(VIMRTDIR)/gvimext.dll
 	cp README_ole.txt dist/vim/$(VIMRTDIR)
 	cp src/VisVim/VisVim.dll dist/vim/$(VIMRTDIR)/VisVim.dll

README.md

@@ -7,6 +7,7 @@
 [![Language Grade: C/C++](https://img.shields.io/lgtm/grade/cpp/g/vim/vim.svg?logo=lgtm&logoWidth=18)](https://lgtm.com/projects/g/vim/vim/context:cpp)
 [![Debian CI](https://badges.debian.net/badges/debian/testing/vim/version.svg)](https://buildd.debian.org/vim)
 [![Packages](https://repology.org/badge/tiny-repos/vim.svg)](https://repology.org/metapackage/vim)
+For translations of this README see the end.
 
 
 ## What is Vim? ##
@@ -29,7 +30,6 @@ almost all flavours of UNIX.  Porting to other systems should not be very
 difficult.  Older versions of Vim run on MS-DOS, MS-Windows 95/98/Me, Amiga
 DOS, Atari MiNT, BeOS, RISC OS and OS/2.  These are no longer maintained.
 
-
 ## Distribution ##
 
 You can often use your favorite package manager to install Vim.  On Mac and
@@ -141,3 +141,8 @@ Send any other comments, patches, flowers and suggestions to:
 
 
 This is `README.md` for version 8.1 of Vim: Vi IMproved.
+
+
+## Translations of this README ##
+
+[Korean](https://github.com/cjw1359/opensource/blob/master/Vim/README_ko.md)

READMEdir/README_os390.txt

@@ -11,8 +11,8 @@ Getting the source to z/OS:
 
 First get the source code in one big tar file and ftp it a binary to z/OS. If
 the tar file is initially compressed with gzip (tar.gz) or bzip2 (tar.bz2)
-uncompress it on your PC, as this tools are (most likely) not available on the
-mainframe.
+uncompress it on your PC, as these tools are (most likely) not available on
+the mainframe.
 
 To reduce the size of the tar file you might compress it into a zip file. On
 z/OS Unix you might have the command "jar" from java to uncompress a zip. Use:
@@ -82,8 +82,8 @@ WARNING: This instruction was not tested with Vim 7.4 or later.
 
 There are two ways for building VIM with X11 support. The first way is simple
 and results in a big executable (~13 Mb), the second needs a few additional
-steps and results in a much smaller executable (~4.5 Mb). This examples assume
-you want Motif.
+steps and results in a much smaller executable (~4.5 Mb). These examples
+assume you want Motif.
 
   The easy way:
     $ export CC=cc

nsis/README.txt

@@ -14,7 +14,7 @@ To build the installable .exe:
 	gvim.exe (the OLE version),
 	vimrun.exe,
 	install.exe,
-	uninstal.exe,
+	uninstall.exe,
 	tee/tee.exe,
 	xxd/xxd.exe,
 

nsis/gvim.nsi

@@ -341,13 +341,13 @@ Section "$(str_section_exe)" id_section_exe
 	File ${VIMSRC}\vim${BIT}.dll
 !endif
 	File /oname=install.exe ${VIMSRC}\installw32.exe
-	File /oname=uninstal.exe ${VIMSRC}\uninstalw32.exe
+	File /oname=uninstall.exe ${VIMSRC}\uninstallw32.exe
 	File ${VIMSRC}\vimrun.exe
 	File /oname=tee.exe ${VIMSRC}\teew32.exe
 	File /oname=xxd.exe ${VIMSRC}\xxdw32.exe
 	File ..\vimtutor.bat
 	File ..\README.txt
-	File ..\uninstal.txt
+	File ..\uninstall.txt
 	File ${VIMRT}\*.vim
 	File ${VIMRT}\rgb.txt
 
@@ -955,7 +955,7 @@ Section "un.$(str_unsection_register)" id_unsection_register
 
 	# delete the context menu entry and batch files
 	DetailPrint "$(str_msg_unregistering)"
-	nsExec::Exec "$0\uninstal.exe -nsis"
+	nsExec::Exec "$0\uninstall.exe -nsis"
 	Pop $3
 
 	# We may have been put to the background when uninstall did something.

nsis/lang/serbian.nsi

@@ -0,0 +1,280 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# serbian.nsi: Serbian language strings for gvim NSIS installer.
+#
+# Locale ID    : 3098
+# fileencoding : UTF-8
+# Author       : Ivan Pešić
+
+!insertmacro MUI_LANGUAGE "Српски"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_SERBIAN} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_SERBIAN} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_SERBIAN} \
+#    "Destination Folder (Must end with $\"vim$\")"
+
+LangString str_show_readme          ${LANG_SERBIAN} \
+    "Прикажи ПРОЧИТАЈМЕ када се заврши инсталација"
+
+# Install types:
+LangString str_type_typical         ${LANG_SERBIAN} \
+    "Типична"
+
+LangString str_type_minimal         ${LANG_SERBIAN} \
+    "Минимална"
+
+LangString str_type_full            ${LANG_SERBIAN} \
+    "Пуна"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_SERBIAN} \
+    "Уклањање постојећ(е/их) верзиј(е/а)"
+LangString str_desc_old_ver         ${LANG_SERBIAN} \
+    "Уклања постојећ(у/е) Vim верзииј(у/е) из вашег система."
+
+LangString str_section_exe          ${LANG_SERBIAN} \
+    "Vim ГКИ и фајлови потребни за извршавање"
+LangString str_desc_exe             ${LANG_SERBIAN} \
+    "Vim ГКИ извршни фајлови и фајлови потребни током извршавања. Ова компонента је неопходна."
+
+LangString str_section_console      ${LANG_SERBIAN} \
+    "Vim конзолни програм"
+LangString str_desc_console         ${LANG_SERBIAN} \
+    "Конзолна верзија програма Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_SERBIAN} \
+    "Креирај .bat фајлове"
+LangString str_desc_batch           ${LANG_SERBIAN} \
+    "Креира у Windows директоријуму .bat фајлове за Vim варијанте \
+     у циљу коришћења из командне линије."
+
+LangString str_group_icons          ${LANG_SERBIAN} \
+    "Креирај иконе за Vim"
+LangString str_desc_icons           ${LANG_SERBIAN} \
+    "Креира иконе за Vim на различитим местима, како би се олакшао приступ."
+
+LangString str_section_desktop      ${LANG_SERBIAN} \
+    "На радној површини"
+LangString str_desc_desktop         ${LANG_SERBIAN} \
+    "Креира иконе за gVim извршне фајлове на радној површини."
+
+LangString str_section_start_menu   ${LANG_SERBIAN} \
+    "У фасцикли Програми унутар Старт менија"
+LangString str_desc_start_menu      ${LANG_SERBIAN} \
+    "Додаје Vim у фолдер Програми Старт менија."
+
+#LangString str_section_quick_launch ${LANG_SERBIAN} \
+#    "In the Quick Launch Bar"
+#LangString str_desc_quick_launch    ${LANG_SERBIAN} \
+#    "Add Vim shortcut in the quick launch bar."
+
+LangString str_section_edit_with    ${LANG_SERBIAN} \
+    "Додај Vim контекстни мени"
+LangString str_desc_edit_with       ${LANG_SERBIAN} \
+    "Додаје Vim у $\"Отвори помоћу...$\" листу контекстног менија."
+
+#LangString str_section_edit_with32  ${LANG_SERBIAN} \
+#    "32-bit Version"
+#LangString str_desc_edit_with32     ${LANG_SERBIAN} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 32-bit applications."
+
+#LangString str_section_edit_with64  ${LANG_SERBIAN} \
+#    "64-bit Version"
+#LangString str_desc_edit_with64     ${LANG_SERBIAN} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 64-bit applications."
+
+LangString str_section_vim_rc       ${LANG_SERBIAN} \
+    "Креирај Подразумевану конфигурацију"
+LangString str_desc_vim_rc          ${LANG_SERBIAN} \
+    "Креира подразумевани конфиг фајл (_vimrc) ако неки већ не постоји."
+
+LangString str_group_plugin         ${LANG_SERBIAN} \
+    "Креира директоријуме додатака"
+LangString str_desc_plugin          ${LANG_SERBIAN} \
+    "Креира директоријуме додатака. Ови директоријуми омогућавају проширење програма Vim \
+     убацивањем фајла у директоријум."
+
+LangString str_section_plugin_home  ${LANG_SERBIAN} \
+    "Приватне"
+LangString str_desc_plugin_home     ${LANG_SERBIAN} \
+    "Креира директоријуме додатака у HOME директоријуму."
+
+LangString str_section_plugin_vim   ${LANG_SERBIAN} \
+    "Дељене"
+LangString str_desc_plugin_vim      ${LANG_SERBIAN} \
+    "Креира директоријуме додатака у Vim инсталационом директоријуму, користе их сви \
+     на систему."
+
+LangString str_section_vis_vim      ${LANG_SERBIAN} \
+    "VisVim проширење"
+LangString str_desc_vis_vim         ${LANG_SERBIAN} \
+    "VisVim проширење за Microsoft Visual Studio интеграцију."
+
+LangString str_section_nls          ${LANG_SERBIAN} \
+    "Подршка за домаћи језик"
+LangString str_desc_nls             ${LANG_SERBIAN} \
+    "Инсталира фајлове за домаћу језичку подршку."
+
+LangString str_unsection_register   ${LANG_SERBIAN} \
+    "Поништи регистрацију Vim"
+LangString str_desc_unregister      ${LANG_SERBIAN} \
+    "Поништава регистрацију програма Vim на систему."
+
+LangString str_unsection_exe        ${LANG_SERBIAN} \
+    "Уклони Vim извршне фајлове/фајлове потребне у време извршавања"
+LangString str_desc_rm_exe          ${LANG_SERBIAN} \
+    "Уклања све Vim извршне фајлове и оне потребне у време извршавања."
+
+LangString str_ungroup_plugin       ${LANG_SERBIAN} \
+    "Укони директоријуме додатака"
+LangString str_desc_rm_plugin       ${LANG_SERBIAN} \
+    "Уклања директоријуме додатака ако су празни."
+
+LangString str_unsection_plugin_home ${LANG_SERBIAN} \
+    "Приватне"
+LangString str_desc_rm_plugin_home  ${LANG_SERBIAN} \
+    "Уклања директоријуме додатака из HOME директоријума."
+
+LangString str_unsection_plugin_vim ${LANG_SERBIAN} \
+    "Дељене"
+LangString str_desc_rm_plugin_vim   ${LANG_SERBIAN} \
+    "Уклања директоријуме додатака из Vim инсталациониг директоријума."
+
+LangString str_unsection_rootdir    ${LANG_SERBIAN} \
+    "Уклони Vim корени директоријум"
+LangString str_desc_rm_rootdir      ${LANG_SERBIAN} \
+    "Уклања Vim корени директоријум. Он садржи ваше Vim конфигурационе фајлове!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_SERBIAN} \
+#    "Found $vim_old_ver_count Vim versions on your system.$\r$\n\
+#     This installer can only handle ${VIM_MAX_OLD_VER} versions \
+#     at most.$\r$\n\
+#     Please remove some versions and start again."
+
+#LangString str_msg_invalid_root  ${LANG_SERBIAN} \
+#    "Invalid install path: $vim_install_root!$\r$\n\
+#     It should end with $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_SERBIAN} \
+#    "Binary path mismatch!$\r$\n$\r$\n\
+#     Expect the binary path to be $\"$vim_bin_path$\",$\r$\n\
+#     but system indicates the binary path is $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_SERBIAN} \
+#    "Vim is still running on your system.$\r$\n\
+#     Please close all instances of Vim before you continue."
+
+#LangString str_msg_register_ole  ${LANG_SERBIAN} \
+#    "Attempting to register Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_unreg_ole     ${LANG_SERBIAN} \
+#    "Attempting to unregister Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_rm_start      ${LANG_SERBIAN} \
+#    "Uninstalling the following version:"
+
+#LangString str_msg_rm_fail       ${LANG_SERBIAN} \
+#    "Fail to uninstall the following version:"
+
+#LangString str_msg_no_rm_key     ${LANG_SERBIAN} \
+#    "Cannot find uninstaller registry key."
+
+#LangString str_msg_no_rm_reg     ${LANG_SERBIAN} \
+#    "Cannot find uninstaller from registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_SERBIAN} \
+#    "Cannot access uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_SERBIAN} \
+#    "Fail to copy uninstaller to temporary directory."
+
+#LangString str_msg_rm_run_fail   ${LANG_SERBIAN} \
+#    "Fail to run uninstaller."
+
+#LangString str_msg_abort_install ${LANG_SERBIAN} \
+#    "Installer will abort."
+
+LangString str_msg_install_fail  ${LANG_SERBIAN} \
+    "Инсталација није успела. Више среће идући пут."
+
+LangString str_msg_rm_exe_fail   ${LANG_SERBIAN} \
+    "Неки фајлови у $0 нису обрисани!$\r$\n\
+     Морате то ручно да обавите."
+
+#LangString str_msg_rm_root_fail  ${LANG_SERBIAN} \
+#    "WARNING: Cannot remove $\"$vim_install_root$\", it is not empty!"
+
+LangString str_msg_uninstalling  ${LANG_SERBIAN} \
+    "Уклањање старе верзије..."
+
+LangString str_msg_registering   ${LANG_SERBIAN} \
+    "Регистровање..."
+
+LangString str_msg_unregistering ${LANG_SERBIAN} \
+    "Поништавање регистрације..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_SERBIAN} \
+    "Изаберите _vimrc подешавања"
+LangString str_vimrc_page_subtitle ${LANG_SERBIAN} \
+    "Изаберите подешавања за побољшања, тастатуру и миша."
+
+LangString str_msg_compat_title    ${LANG_SERBIAN} \
+    " Vi / Vim понашање "
+LangString str_msg_compat_desc     ${LANG_SERBIAN} \
+    "&Компатибилност и побољшања"
+LangString str_msg_compat_vi       ${LANG_SERBIAN} \
+    "Vi компатибилно"
+LangString str_msg_compat_vim      ${LANG_SERBIAN} \
+    "Vim оригинално"
+LangString str_msg_compat_defaults ${LANG_SERBIAN} \
+    "Vim са неким побољшањима (учитава defaults.vim)"
+LangString str_msg_compat_all      ${LANG_SERBIAN} \
+    "Vim са свим побољшањима (учитава vimrc_example.vim) (Подразумевано)"
+
+LangString str_msg_keymap_title   ${LANG_SERBIAN} \
+    " Мапирања "
+LangString str_msg_keymap_desc    ${LANG_SERBIAN} \
+    "&Ремапира неколико тастера за Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, итд.)"
+LangString str_msg_keymap_default ${LANG_SERBIAN} \
+    "Немој да ремапираш тастере (Подразумевано)"
+LangString str_msg_keymap_windows ${LANG_SERBIAN} \
+    "Ремапира неколико тастера"
+
+LangString str_msg_mouse_title   ${LANG_SERBIAN} \
+    " Миш "
+LangString str_msg_mouse_desc    ${LANG_SERBIAN} \
+    "&Понашање левог и десног тастера"
+LangString str_msg_mouse_default ${LANG_SERBIAN} \
+    "Десни: искачући мени, Леви: визуелни режим (Подразумевано)"
+LangString str_msg_mouse_windows ${LANG_SERBIAN} \
+    "Десни: искачући мени, Леви: режим избора (Windows)"
+LangString str_msg_mouse_unix    ${LANG_SERBIAN} \
+    "Десни: проширује избор, Леви: визуелни режим (Unix)"

nsis/lang/simpchinese.nsi

@@ -5,7 +5,7 @@
 #
 # Locale ID    : 2052
 # fileencoding : UTF-8
-# Author       : Guopeng Wen
+# Author       : Guopeng Wen, David Liu
 
 !insertmacro MUI_LANGUAGE "SimpChinese"
 
@@ -112,7 +112,7 @@ LangString str_desc_plugin          ${LANG_SIMPCHINESE} \
 LangString str_section_plugin_home  ${LANG_SIMPCHINESE} \
     "私有插件目录"
 LangString str_desc_plugin_home     ${LANG_SIMPCHINESE} \
-    "Create plugin directories in HOME directory."
+    "在主目录创建私有插件目录。"
 
 LangString str_section_plugin_vim   ${LANG_SIMPCHINESE} \
     "公共插件目录"
@@ -141,14 +141,14 @@ LangString str_desc_rm_exe          ${LANG_SIMPCHINESE} \
     "删除 Vim 的所有执行文件及脚本。"
 
 LangString str_ungroup_plugin       ${LANG_SIMPCHINESE} \
-    "Remove plugin directories"
+    "移除插件目录"
 LangString str_desc_rm_plugin       ${LANG_SIMPCHINESE} \
-    "Remove the plugin directories if they are empty."
+    "移除插件目录（如果目录为空）。"
 
 LangString str_unsection_plugin_home ${LANG_SIMPCHINESE} \
     "私有插件目录"
 LangString str_desc_rm_plugin_home  ${LANG_SIMPCHINESE} \
-    "Remove the plugin directories from HOME directory."
+    "从主目录中移除私有插件目录。"
 
 LangString str_unsection_plugin_vim ${LANG_SIMPCHINESE} \
     "公共插件目录"
@@ -241,37 +241,37 @@ LangString str_msg_unregistering ${LANG_SIMPCHINESE} \
 LangString str_vimrc_page_title    ${LANG_SIMPCHINESE} \
     "设置 _vimrc"
 LangString str_vimrc_page_subtitle ${LANG_SIMPCHINESE} \
-    "选择键盘、鼠标和增强选项。"
+    "选择键盘、鼠标和扩展设置。"
 
 LangString str_msg_compat_title    ${LANG_SIMPCHINESE} \
     "Vi / Vim 行为"
 LangString str_msg_compat_desc     ${LANG_SIMPCHINESE} \
-    "&Compatibility and enhancements"
+    "兼容性与扩展(&B)"
 LangString str_msg_compat_vi       ${LANG_SIMPCHINESE} \
-    "Vi compatible"
+    "原始 Vi"
 LangString str_msg_compat_vim      ${LANG_SIMPCHINESE} \
-    "Vim original"
+    "原始 Vim"
 LangString str_msg_compat_defaults ${LANG_SIMPCHINESE} \
-    "Vim with some enhancements (load defaults.vim)"
+    "Vim 原始版本和部分扩展 (加载 defaults.vim)"
 LangString str_msg_compat_all      ${LANG_SIMPCHINESE} \
-    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+    "Vim 原始版本和所有扩展 (加载 vimrc_example.vim) (缺省)"
 
 LangString str_msg_keymap_title   ${LANG_SIMPCHINESE} \
     "键盘映射"
 LangString str_msg_keymap_desc    ${LANG_SIMPCHINESE} \
-    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+    "为 Windows 映射按键(&R) (例如:Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F 等)"
 LangString str_msg_keymap_default ${LANG_SIMPCHINESE} \
-    "Do not remap keys (Default)"
+    "不映射按键 (缺省)"
 LangString str_msg_keymap_windows ${LANG_SIMPCHINESE} \
-    "Remap a few keys"
+    "映射一些按键"
 
 LangString str_msg_mouse_title   ${LANG_SIMPCHINESE} \
     "鼠标"
 LangString str_msg_mouse_desc    ${LANG_SIMPCHINESE} \
-    "&Behavior of right and left buttons"
+    "左键和右键行为(&B)"
 LangString str_msg_mouse_default ${LANG_SIMPCHINESE} \
-    "Right: popup menu, Left: visual mode (Default)"
+    "右键：弹出菜单, 左键：可视化模式 (缺省)"
 LangString str_msg_mouse_windows ${LANG_SIMPCHINESE} \
-    "Right: popup menu, Left: select mode (Windows)"
+    "右键：弹出菜单, 左键:选择模式 (Windows)"
 LangString str_msg_mouse_unix    ${LANG_SIMPCHINESE} \
-    "Right: extends selection, Left: visual mode (Unix)"
+    "右键： 扩展选择, 左键：可视化模式 (Unix)"

nsis/lang/turkish.nsi

@@ -0,0 +1,190 @@
+# turkish.nsi: Turkish language strings for gvim NSIS installer.
+# fileencoding : UTF-8
+# Author       : Emir SARI
+
+!insertmacro MUI_LANGUAGE "Turkish"
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_TURKISH} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_TURKISH} \
+        "$(^Name) Uninstall"
+        
+LangString str_show_readme          ${LANG_TURKISH} \
+    "Kurulum bittikten sonra README dosyasını aç"
+
+# Install types:
+LangString str_type_typical         ${LANG_TURKISH} \
+    "Normal"
+
+LangString str_type_minimal         ${LANG_TURKISH} \
+    "Küçük"
+
+LangString str_type_full            ${LANG_TURKISH} \
+    "Tam"
+    
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_TURKISH} \
+    "Eski sürümü kaldır"
+LangString str_desc_old_ver         ${LANG_TURKISH} \
+    "Vim'in eski sürümünü sisteminizden kaldırır."
+
+LangString str_section_exe          ${LANG_TURKISH} \
+    "Vim grafik arabirimi ve çalışma dosyaları"
+LangString str_desc_exe             ${LANG_TURKISH} \
+    "Vim program başlatıcı ve çalışma dosyaları. Bu bileşen zorunludur."
+
+LangString str_section_console      ${LANG_TURKISH} \
+    "Vim konsol sürümü"
+LangString str_desc_console         ${LANG_TURKISH} \
+    "Vim'in konsol sürümü (vim.exe)."
+
+LangString str_section_batch        ${LANG_TURKISH} \
+    ".bat dosyaları oluştur"
+LangString str_desc_batch           ${LANG_TURKISH} \
+    "Vim için komut satırında kullanmak üzere .bat dosyaları oluşturur"
+
+LangString str_group_icons          ${LANG_TURKISH} \
+    "Vim için kısayollar oluştur"
+LangString str_desc_icons           ${LANG_TURKISH} \
+    "Kolay erişim için Vim kısayolları oluşturur."
+
+LangString str_section_desktop      ${LANG_TURKISH} \
+    "Masaüstünde"
+LangString str_desc_desktop         ${LANG_TURKISH} \
+    "gVim programı için Masaüstünde kısayol oluşturur."
+
+LangString str_section_start_menu   ${LANG_TURKISH} \
+    "Başlat Menüsü - Programlar klasöründe"
+LangString str_desc_start_menu      ${LANG_TURKISH} \
+    "Vim kısayolunu Başlat Menüsüne ekler."
+    
+LangString str_section_edit_with    ${LANG_TURKISH} \
+    "Vim ile Aç"
+LangString str_desc_edit_with       ${LANG_TURKISH} \
+    "Vim'i $\"Birlikte aç$\" sağ tıklama menüsüne ekler."
+    
+ LangString str_section_vim_rc       ${LANG_TURKISH} \
+    "Bir konfigürasyon dosyası oluştur"
+LangString str_desc_vim_rc          ${LANG_TURKISH} \
+    "Eğer yoksa bir konfigürasyon dosyası (_vimrc) oluşturur."
+
+LangString str_group_plugin         ${LANG_TURKISH} \
+    "Eklenti dizinleri oluştur"
+LangString str_desc_plugin          ${LANG_TURKISH} \
+    "Bu dizinlere Vim eklentilerini yerleştirerek Vim'e yeni \
+     özellikler kazandırabilirsiniz."
+
+LangString str_section_plugin_home  ${LANG_TURKISH} \
+    "Gizli"
+LangString str_desc_plugin_home     ${LANG_TURKISH} \
+    "Eklenti dizinlerini EV dizininde oluşturur."
+
+LangString str_section_plugin_vim   ${LANG_TURKISH} \
+    "Paylaşılan"
+LangString str_desc_plugin_vim      ${LANG_TURKISH} \
+    "Eklenti dizinlerini Vim yükleme dizininde oluşturur. Bu eklentilerden \
+     bilgisayarın tüm kullanıcıları yararlanabilir."
+
+LangString str_section_vis_vim      ${LANG_TURKISH} \
+    "VisVim eklentisi"
+LangString str_desc_vis_vim         ${LANG_TURKISH} \
+    "Microsoft Visual Studio entegrasyonu için VisVim eklentisi" 
+
+LangString str_section_nls          ${LANG_TURKISH} \
+    "Ek dil desteği"
+LangString str_desc_nls             ${LANG_TURKISH} \
+    "Mevcut olan Vim yerelleştirmelerini yükler."
+
+LangString str_unsection_register   ${LANG_TURKISH} \
+    "Vim kaydını kaldır"
+LangString str_desc_unregister      ${LANG_TURKISH} \
+    "Vim'in bu bilgisayardaki kaydını kaldırır."
+
+LangString str_unsection_exe        ${LANG_TURKISH} \
+    "Vim programını ve çalıştırma dosyalarını kaldır"
+LangString str_desc_rm_exe          ${LANG_TURKISH} \
+    "Tüm Vim çalıştırılabilir dosyalarını ve diğer dosyaları kaldırır."
+
+LangString str_ungroup_plugin       ${LANG_TURKISH} \
+    "Eklenti dizinlerini kaldır"
+LangString str_desc_rm_plugin       ${LANG_TURKISH} \
+    "Eklenti dizinlerini eğer boş ise kaldırır."
+
+LangString str_unsection_plugin_home ${LANG_TURKISH} \
+    "Gizli"
+LangString str_desc_rm_plugin_home  ${LANG_TURKISH} \
+    "Eklenti dizinlerini EV dizininden kaldırır."
+
+LangString str_unsection_plugin_vim ${LANG_TURKISH} \
+    "Paylaşılan"
+LangString str_desc_rm_plugin_vim   ${LANG_TURKISH} \
+    "Eklenti dizinlerini Vim yükleme dizininden kaldırır."
+
+LangString str_unsection_rootdir    ${LANG_TURKISH} \
+    "Vim kök dizinini kaldır"
+LangString str_desc_rm_rootdir      ${LANG_TURKISH} \
+    "Vim kök dizinini kaldırır. Bu dizin Vim konfigürasyon dosyalarını içerir!"
+    
+ LangString str_msg_install_fail  ${LANG_TURKISH} \
+    "Yükleme başarısız oldu. Yeniden deneyin."
+
+LangString str_msg_rm_exe_fail   ${LANG_TURKISH} \
+    "$0 içindeki bazı dosyalar silinemedi!$\r$\n\
+     Bu dosyaları el ile kaldırmalısınız."
+     
+ LangString str_msg_uninstalling  ${LANG_TURKISH} \
+    "Eski sürüm kaldırılıyor..."
+
+LangString str_msg_registering   ${LANG_TURKISH} \
+    "Kaydediliyor..."
+
+LangString str_msg_unregistering ${LANG_TURKISH} \
+    "Kayıt siliniyor..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_TURKISH} \
+    "_vimrc ayarlarını seçin"
+LangString str_vimrc_page_subtitle ${LANG_TURKISH} \
+    "Yüklenecek ek özellikler, klavye ve fare için ayarları seçin."
+
+LangString str_msg_compat_title    ${LANG_TURKISH} \
+    " Vi / Vim davranışı "
+LangString str_msg_compat_desc     ${LANG_TURKISH} \
+    "&Uyumluluk ve ek özellikler"
+LangString str_msg_compat_vi       ${LANG_TURKISH} \
+    "Vi uyumlu"
+LangString str_msg_compat_vim      ${LANG_TURKISH} \
+    "Vim orijinal"
+LangString str_msg_compat_defaults ${LANG_TURKISH} \
+    "Vim ve ek olarak bazı ek özellikler (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_TURKISH} \
+    "Vim ve ek olarak tüm ek özellikler (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_TURKISH} \
+    " Klavye İşlevleri "
+LangString str_msg_keymap_desc    ${LANG_TURKISH} \
+    "&Windows için bazı düğmeleri yeniden ayarla (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_TURKISH} \
+    "Düğme işlevlerini değiştirme (varsayılan)"
+LangString str_msg_keymap_windows ${LANG_TURKISH} \
+    "Bazı düğmeleri yeniden ayarla"
+
+LangString str_msg_mouse_title   ${LANG_TURKISH} \
+    " Fare İşlevleri "
+LangString str_msg_mouse_desc    ${LANG_TURKISH} \
+    "&Sağ ve sol düğme davranışı"
+LangString str_msg_mouse_default ${LANG_TURKISH} \
+    "Sağ: açılır menü, Sol: Görsel Kip (varsayılan)"
+LangString str_msg_mouse_windows ${LANG_TURKISH} \
+    "Sağ: açılır menü, Sol: seçim kipi (Windows)"
+LangString str_msg_mouse_unix    ${LANG_TURKISH} \
+    "Sağ: seçimi genişlet, Sol: Görsel Kip (Unix)"

runtime/autoload/haskellcomplete.vim

@@ -2,7 +2,7 @@
 " Language:        Haskell
 " Maintainer:      Daniel Campoverde <alx@sillybytes.net>
 " URL:             https://github.com/alx741/haskellcomplete.vim
-" Last Change:     2018 Aug 26
+" Last Change:     2019 May 14
 
 " Usage:           setlocal omnifunc=haskellcomplete#Complete
 
@@ -63,6 +63,7 @@ function! haskellcomplete#Complete(findstart, base)
                     call add(l:matches, extension)
                 endif
             endfor
+            let b:completingLangExtension = 0
             return l:matches
         endif
 
@@ -78,6 +79,7 @@ function! haskellcomplete#Complete(findstart, base)
                     call add(l:matches, flag)
                 endif
             endfor
+            let b:completingOptionsGHC = 0
             return l:matches
         endif
 
@@ -93,6 +95,7 @@ function! haskellcomplete#Complete(findstart, base)
                     call add(l:matches, module)
                 endif
             endfor
+            let b:completingModule = 0
             return l:matches
         endif
 

runtime/autoload/htmlcomplete.vim

@@ -1,7 +1,7 @@
 " Vim completion script
 " Language:	HTML and XHTML
 " Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change:	2014 Jun 20
+" Last Change:	2019 Sep 27
 
 " Distinguish between HTML versions.
 " To use with other HTML versions add another "elseif" condition to match
@@ -245,7 +245,8 @@ function! htmlcomplete#CompleteTags(findstart, base)
 	" If context contains white space it is attribute.
 	" It can be also value of attribute.
 	" We have to get first word to offer proper completions
-	if context == ''
+	if context =~ '^\s*$'
+		" empty or whitespace line
 		let tag = ''
 	else
 		let tag = split(context)[0]

runtime/autoload/netrw.vim

@@ -1,7 +1,7 @@
 " netrw.vim: Handles file transfer and remote directory listing across
 "            AUTOLOAD SECTION
-" Date:		Jul 16, 2019
-" Version:	165
+" Date:		Nov 06, 2019
+" Version:	166
 " Maintainer:	Charles E Campbell <NdrOchip@ScampbellPfamily.AbizM-NOSPAM>
 " GetLatestVimScripts: 1075 1 :AutoInstall: netrw.vim
 " Copyright:    Copyright (C) 2016 Charles E. Campbell {{{1
@@ -39,7 +39,7 @@ if exists("s:needspatches")
  endfor
 endif
 
-let g:loaded_netrw = "v165"
+let g:loaded_netrw = "v166"
 if !exists("s:NOTE")
  let s:NOTE    = 0
  let s:WARNING = 1
@@ -232,12 +232,12 @@ if !exists("g:netrw_ftp_options")
  let g:netrw_ftp_options= "-i -n"
 endif
 if !exists("g:netrw_http_cmd")
- if executable("curl")
-  let g:netrw_http_cmd	= "curl"
-  call s:NetrwInit("g:netrw_http_xcmd","-L -o")
- elseif executable("wget")
+ if executable("wget")
   let g:netrw_http_cmd	= "wget"
   call s:NetrwInit("g:netrw_http_xcmd","-q -O")
+ elseif executable("curl")
+  let g:netrw_http_cmd	= "curl"
+  call s:NetrwInit("g:netrw_http_xcmd","-L -o")
  elseif executable("elinks")
   let g:netrw_http_cmd = "elinks"
   call s:NetrwInit("g:netrw_http_xcmd","-source >")
@@ -689,6 +689,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
 
   " save registers
   if has("clipboard")
+"   call Decho("(netrw#Explore) save @* and @+",'~'.expand("<slnum>"))
    sil! let keepregstar = @*
    sil! let keepregplus = @+
   endif
@@ -916,6 +917,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
      if !exists("w:netrw_explore_list") " sanity check
       NetrwKeepj call netrw#ErrorMsg(s:WARNING,"using Nexplore or <s-down> improperly; see help for netrw-starstar",40)
       if has("clipboard")
+"       call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
        sil! let @* = keepregstar
        sil! let @+ = keepregplus
       endif
@@ -941,6 +943,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
      if !exists("w:netrw_explore_list") " sanity check
       NetrwKeepj call netrw#ErrorMsg(s:WARNING,"using Pexplore or <s-up> improperly; see help for netrw-starstar",41)
       if has("clipboard")
+"       call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
        sil! let @* = keepregstar
        sil! let @+ = keepregplus
       endif
@@ -996,6 +999,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
        keepalt call netrw#ErrorMsg(s:WARNING,'no files matched pattern<'.pattern.'>',45)
        if &hls | let keepregslash= s:ExplorePatHls(pattern) | endif
        if has("clipboard")
+"        call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
 	sil! let @* = keepregstar
 	sil! let @+ = keepregplus
        endif
@@ -1032,6 +1036,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
      if w:netrw_explore_listlen == 0 || (w:netrw_explore_listlen == 1 && w:netrw_explore_list[0] =~ '\*\*\/')
       keepalt NetrwKeepj call netrw#ErrorMsg(s:WARNING,"no files matched",42)
       if has("clipboard")
+"       call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
        sil! let @* = keepregstar
        sil! let @+ = keepregplus
       endif
@@ -1080,6 +1085,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
      keepalt NetrwKeepj call netrw#ErrorMsg(s:WARNING,"your vim needs the +path_extra feature for Exploring with **!",44)
     endif
     if has("clipboard")
+"     call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
      sil! let @* = keepregstar
      sil! let @+ = keepregplus
     endif
@@ -1153,6 +1159,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
   " Consequently, set s:netrw_events to 2.
   let s:netrw_events= 2
   if has("clipboard")
+"   call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
    sil! let @* = keepregstar
    sil! let @+ = keepregplus
   endif
@@ -1642,7 +1649,6 @@ fun! s:NetrwOptionsSave(vt)
   let {a:vt}netrw_cpokeep   = &l:cpo
   let {a:vt}netrw_diffkeep  = &l:diff
   let {a:vt}netrw_fenkeep   = &l:fen
-"  call Decho("saving current settings: got here#1",'~'.expand("<slnum>"))
   if !exists("g:netrw_ffkeep") || g:netrw_ffkeep
    let {a:vt}netrw_ffkeep    = &l:ff
   endif
@@ -1661,7 +1667,6 @@ fun! s:NetrwOptionsSave(vt)
   let {a:vt}netrw_rokeep    = &l:ro
   let {a:vt}netrw_selkeep   = &l:sel
   let {a:vt}netrw_spellkeep = &l:spell
-"  call Decho("saving current settings: got here#2",'~'.expand("<slnum>"))
   if !g:netrw_use_noswf
    let {a:vt}netrw_swfkeep  = &l:swf
   endif
@@ -1675,6 +1680,7 @@ fun! s:NetrwOptionsSave(vt)
 "  call Decho("saving a few selected netrw-related variables",'~'.expand("<slnum>"))
   if g:netrw_keepdir
    let {a:vt}netrw_dirkeep  = getcwd()
+"   call Decho("saving to ".a:vt."netrw_dirkeep<".{a:vt}netrw_dirkeep.">",'~'.expand("<slnum>"))
   endif
   if has("clipboard")
    sil! let {a:vt}netrw_starkeep = @*
@@ -1745,6 +1751,7 @@ fun! s:NetrwOptionsRestore(vt)
 "  call Dfunc("s:NetrwOptionsRestore(vt<".a:vt.">) win#".winnr()." buf#".bufnr("%")."<".bufname("%")."> winnr($)=".winnr("$"))
 "  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
   if !exists("{a:vt}netrw_optionsave")
+"   call Decho("case ".a:vt."netrw_optionsave : doesn't exist",'~'.expand("<slnum>"))
 "   call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
 "   call Decho("ro=".&l:ro." ma=".&l:ma." mod=".&l:mod." wrap=".&l:wrap." (filename<".expand("%")."> win#".winnr()." ft<".&ft.">)",'~'.expand("<slnum>"))
 "   call Dret("s:NetrwOptionsRestore : ".a:vt."netrw_optionsave doesn't exist")
@@ -1829,6 +1836,7 @@ fun! s:NetrwOptionsRestore(vt)
    endif
   endif
   if has("clipboard")
+"   call Decho("has clipboard",'~'.expand("<slnum>"))
    call s:NetrwRestoreSetting(a:vt."netrw_starkeep","@*")
    call s:NetrwRestoreSetting(a:vt."netrw_pluskeep","@+")
   endif
@@ -1890,7 +1898,7 @@ endfun
 "                        Used by s:NetrwOptionsRestore() to restore each netrw-senstive setting
 "                        keepvars are set up by s:NetrwOptionsSave
 fun! s:NetrwRestoreSetting(keepvar,setting)
-""  call Dfunc("s:NetrwRestoreSetting(a:keepvar<".a:keepvar."> a:setting<".a:setting.">)")
+"""  call Dfunc("s:NetrwRestoreSetting(a:keepvar<".a:keepvar."> a:setting<".a:setting.">)")
 
   " typically called from s:NetrwOptionsRestore
   "   call s:NetrwRestoreSettings(keep-option-variable-name,'associated-option')
@@ -1905,7 +1913,7 @@ fun! s:NetrwRestoreSetting(keepvar,setting)
 ""   call Decho("fyi: a:setting<".a:setting."> setting<".setting.">")
 
    if setting != keepvarval
-""    call Decho("restore setting<".a:setting."=".setting."> to keepvarval<".keepvarval.">")
+""    call Decho("restore setting<".a:setting."> (currently=".setting.") to keepvarval<".keepvarval.">")
     if type(a:setting) == 0
      exe "let ".a:setting."= ".keepvarval
     elseif type(a:setting) == 1
@@ -2863,7 +2871,7 @@ fun! s:NetrwGetFile(readcmd, tfile, method)
   " readcmd=='t': simply do nothing
   if a:readcmd == 't'
 "   call Decho(" ro=".&l:ro." ma=".&l:ma." mod=".&l:mod." wrap=".&l:wrap." (filename<".expand("%")."> win#".winnr()." ft<".&ft.">)",'~'.expand("<slnum>"))
-"   call Dret("NetrwGetFile : skip read of <".a:tfile.">")
+"   call Dret("NetrwGetFile : skip read of tfile<".a:tfile.">")
    return
   endif
 
@@ -5194,10 +5202,11 @@ fun! s:NetrwBrowseUpDir(islocal)
 endfun
 
 " ---------------------------------------------------------------------
-" netrw#BrowseX:  (implements "x") executes a special "viewer" script or program for the {{{2
+" netrw#BrowseX:  (implements "x" and "gx") executes a special "viewer" script or program for the {{{2
 "              given filename; typically this means given their extension.
 "              0=local, 1=remote
 fun! netrw#BrowseX(fname,remote)
+  let use_ctrlo= 1
 "  call Dfunc("netrw#BrowseX(fname<".a:fname."> remote=".a:remote.")")
 
   " if its really just a local directory, then do a "gf" instead
@@ -5302,10 +5311,9 @@ fun! netrw#BrowseX(fname,remote)
   endif
 "  call Decho("set up redirection: redir{".redir."} srr{".&srr."}",'~'.expand("<slnum>"))
 
-  " extract any viewing options.  Assumes that they're set apart by quotes.
-"  call Decho("extract any viewing options",'~'.expand("<slnum>"))
+  " extract any viewing options.  Assumes that they're set apart by spaces.
   if exists("g:netrw_browsex_viewer")
-"   call Decho("g:netrw_browsex_viewer<".g:netrw_browsex_viewer.">",'~'.expand("<slnum>"))
+"   call Decho("extract any viewing options from g:netrw_browsex_viewer<".g:netrw_browsex_viewer.">",'~'.expand("<slnum>"))
    if g:netrw_browsex_viewer =~ '\s'
     let viewer  = substitute(g:netrw_browsex_viewer,'\s.*$','','')
     let viewopt = substitute(g:netrw_browsex_viewer,'^\S\+\s*','','')." "
@@ -5328,16 +5336,16 @@ fun! netrw#BrowseX(fname,remote)
   " execute the file handler
 "  call Decho("execute the file handler (if any)",'~'.expand("<slnum>"))
   if exists("g:netrw_browsex_viewer") && g:netrw_browsex_viewer == '-'
-"   call Decho("g:netrw_browsex_viewer<".g:netrw_browsex_viewer.">",'~'.expand("<slnum>"))
+"   call Decho("(netrw#BrowseX) g:netrw_browsex_viewer<".g:netrw_browsex_viewer.">",'~'.expand("<slnum>"))
    let ret= netrwFileHandlers#Invoke(exten,fname)
 
   elseif exists("g:netrw_browsex_viewer") && executable(viewer)
-"   call Decho("g:netrw_browsex_viewer<".g:netrw_browsex_viewer.">",'~'.expand("<slnum>"))
+"   call Decho("(netrw#BrowseX) g:netrw_browsex_viewer<".g:netrw_browsex_viewer.">",'~'.expand("<slnum>"))
    call s:NetrwExe("sil !".viewer." ".viewopt.s:ShellEscape(fname,1).redir)
    let ret= v:shell_error
 
   elseif has("win32") || has("win64")
-"   call Decho("win".(has("win32")? "32" : "64")",'~'.expand("<slnum>"))
+"   call Decho("(netrw#BrowseX) win".(has("win32")? "32" : "64"),'~'.expand("<slnum>"))
    if executable("start")
     call s:NetrwExe('sil! !start rundll32 url.dll,FileProtocolHandler '.s:ShellEscape(fname,1))
    elseif executable("rundll32")
@@ -5345,56 +5353,68 @@ fun! netrw#BrowseX(fname,remote)
    else
     call netrw#ErrorMsg(s:WARNING,"rundll32 not on path",74)
    endif
-   " call inputsave()|call input("Press <cr> to continue")|call inputrestore()
    let ret= v:shell_error
 
   elseif has("win32unix")
    let winfname= 'c:\cygwin'.substitute(fname,'/','\\','g')
-"   call Decho("cygwin: winfname<".s:ShellEscape(winfname,1).">",'~'.expand("<slnum>"))
+"   call Decho("(netrw#BrowseX) cygwin: winfname<".s:ShellEscape(winfname,1).">",'~'.expand("<slnum>"))
    if executable("start")
+"    call Decho("(netrw#BrowseX) win32unix+start",'~'.expand("<slnum>"))
     call s:NetrwExe('sil !start rundll32 url.dll,FileProtocolHandler '.s:ShellEscape(winfname,1))
    elseif executable("rundll32")
+"    call Decho("(netrw#BrowseX) win32unix+rundll32",'~'.expand("<slnum>"))
     call s:NetrwExe('sil !rundll32 url.dll,FileProtocolHandler '.s:ShellEscape(winfname,1))
    elseif executable("cygstart")
+"    call Decho("(netrw#BrowseX) win32unix+cygstart",'~'.expand("<slnum>"))
     call s:NetrwExe('sil !cygstart '.s:ShellEscape(fname,1))
    else
     call netrw#ErrorMsg(s:WARNING,"rundll32 not on path",74)
    endif
-   " call inputsave()|call input("Press <cr> to continue")|call inputrestore()
    let ret= v:shell_error
 
   elseif has("unix") && executable("kfmclient") && s:CheckIfKde()
-"   call Decho("unix and kfmclient",'~'.expand("<slnum>"))
+"   call Decho("(netrw#BrowseX) unix and kfmclient",'~'.expand("<slnum>"))
    call s:NetrwExe("sil !kfmclient exec ".s:ShellEscape(fname,1)." ".redir)
    let ret= v:shell_error
 
   elseif has("unix") && executable("exo-open") && executable("xdg-open") && executable("setsid")
-"   call Decho("unix, exo-open, xdg-open",'~'.expand("<slnum>"))
+"   call Decho("(netrw#BrowseX) unix, exo-open, xdg-open",'~'.expand("<slnum>"))
    call s:NetrwExe("sil !setsid xdg-open ".s:ShellEscape(fname,1).redir)
    let ret= v:shell_error
 
   elseif has("unix") && $DESKTOP_SESSION == "mate" && executable("atril")
-"   call Decho("unix and atril",'~'.expand("<slnum>"))
-   call s:NetrwExe("sil !atril ".s:ShellEscape(fname,1).redir)
+"   call Decho("(netrw#BrowseX) unix and atril",'~'.expand("<slnum>"))
+   if a:fname =~ '^https\=://'
+    " atril does not appear to understand how to handle html -- so use gvim to edit the document
+    let use_ctrlo= 0
+"    call Decho("(COMBAK) fname<".fname.">")
+"    call Decho("(COMBAK) a:fname<".a:fname.">")
+    call s:NetrwExe("sil! !gvim ".fname.' -c "keepj keepalt file '.fnameescape(a:fname).'"')
+
+   else
+    call s:NetrwExe("sil !atril ".s:ShellEscape(fname,1).redir)
+   endif
    let ret= v:shell_error
 
   elseif has("unix") && executable("xdg-open")
-"   call Decho("unix and xdg-open",'~'.expand("<slnum>"))
+"   call Decho("(netrw#BrowseX) unix and xdg-open",'~'.expand("<slnum>"))
    call s:NetrwExe("sil !xdg-open ".s:ShellEscape(fname,1).redir)
    let ret= v:shell_error
 
   elseif has("macunix") && executable("open")
-"   call Decho("macunix and open",'~'.expand("<slnum>"))
+"   call Decho("(netrw#BrowseX) macunix and open",'~'.expand("<slnum>"))
    call s:NetrwExe("sil !open ".s:ShellEscape(fname,1)." ".redir)
    let ret= v:shell_error
 
   else
    " netrwFileHandlers#Invoke() always returns 0
+"   call Decho("(netrw#BrowseX) use netrwFileHandlers",'~'.expand("<slnum>"))
    let ret= netrwFileHandlers#Invoke(exten,fname)
   endif
 
   " if unsuccessful, attempt netrwFileHandlers#Invoke()
   if ret
+"   call Decho("(netrw#BrowseX) ret=".ret," indicates unsuccessful thus far",'~'.expand("<slnum>"))
    let ret= netrwFileHandlers#Invoke(exten,fname)
   endif
 
@@ -5416,8 +5436,9 @@ fun! netrw#BrowseX(fname,remote)
    if g:netrw_use_noswf
     setl noswf
    endif
-   exe "sil! NetrwKeepj norm! \<c-o>"
-"   redraw!
+   if use_ctrlo
+    exe "sil! NetrwKeepj norm! \<c-o>"
+   endif
   endif
 "  call Decho("restoring posn to screenposn<".string(screenposn).">",'~'.expand("<slnum>"))
   call winrestview(screenposn)
@@ -6076,7 +6097,6 @@ fun! s:NetrwListHide()
 "  call Dfunc("s:NetrwListHide() g:netrw_hide=".g:netrw_hide." g:netrw_list_hide<".g:netrw_list_hide.">")
 "  call Decho("initial: ".string(getline(w:netrw_bannercnt,'$')))
   let ykeep= @@
-"  call DechoBuf(bufnr("%"),"COMBAK#3")
 
   " find a character not in the "hide" string to use as a separator for :g and :v commands
   " How-it-works: take the hiding command, convert it into a range.
@@ -6120,7 +6140,6 @@ fun! s:NetrwListHide()
   " remove any blank lines that have somehow remained.
   " This seems to happen under Windows.
   exe 'sil! NetrwKeepj 1,$g@^\s*$@d'
-"  call DechoBuf(bufnr("%"),"COMBAK#4")
 
   let @@= ykeep
 "  call Dret("s:NetrwListHide")
@@ -6328,7 +6347,7 @@ fun! s:NetrwMaps(islocal)
 
   " generate default <Plug> maps {{{3
   if !hasmapto('<Plug>NetrwHide')              |nmap <buffer> <silent> <nowait> a	<Plug>NetrwHide_a|endif
-  if !hasmapto('<Plug>NetrwBrowseUpDir')       |nmap <buffer> <silent> <nowait> -	<Plug>NetrwBrowseUpDir |endif
+  if !hasmapto('<Plug>NetrwBrowseUpDir')       |nmap <buffer> <silent> <nowait> -	<Plug>NetrwBrowseUpDir|endif
   if !hasmapto('<Plug>NetrwOpenFile')          |nmap <buffer> <silent> <nowait> %	<Plug>NetrwOpenFile|endif
   if !hasmapto('<Plug>NetrwBadd_cb')           |nmap <buffer> <silent> <nowait> cb	<Plug>NetrwBadd_cb|endif
   if !hasmapto('<Plug>NetrwBadd_cB')           |nmap <buffer> <silent> <nowait> cB	<Plug>NetrwBadd_cB|endif
@@ -6788,13 +6807,15 @@ fun! s:NetrwMarkFile(islocal,fname)
    if index(s:netrwmarkfilelist,dname) == -1
     " append new filename to global markfilelist
     call add(s:netrwmarkfilelist,s:ComposePath(b:netrw_curdir,a:fname))
-"    call Decho("append filename<".a:fname."> to global markfilelist<".string(s:netrwmarkfilelist).">",'~'.expand("<slnum>"))
+"    call Decho("append filename<".a:fname."> to global s:markfilelist<".string(s:netrwmarkfilelist).">",'~'.expand("<slnum>"))
    else
     " remove new filename from global markfilelist
-"    call Decho("filter(".string(s:netrwmarkfilelist).",'v:val != '.".dname.")",'~'.expand("<slnum>"))
+"    call Decho("remove new filename from global s:markfilelist",'~'.expand("<slnum>"))
+"    call Decho("..filter(".string(s:netrwmarkfilelist).",'v:val != '.".dname.")",'~'.expand("<slnum>"))
     call filter(s:netrwmarkfilelist,'v:val != "'.dname.'"')
-"    call Decho("ending s:netrwmarkfilelist  <".string(s:netrwmarkfilelist).">",'~'.expand("<slnum>"))
+"    call Decho("..ending s:netrwmarkfilelist  <".string(s:netrwmarkfilelist).">",'~'.expand("<slnum>"))
     if s:netrwmarkfilelist == []
+"     call Decho("s:netrwmarkfilelist is empty; unlet it",'~'.expand("<slnum>"))
      unlet s:netrwmarkfilelist
     endif
    endif
@@ -6818,7 +6839,8 @@ fun! s:NetrwMarkFile(islocal,fname)
    endif
   endif
   let @@= ykeep
-"  call Dret("s:NetrwMarkFile : s:netrwmarkfilelist_".curbufnr."<".(exists("s:netrwmarkfilelist_{curbufnr}")? string(s:netrwmarkfilelist_{curbufnr}) : " doesn't exist").">")
+"  call Decho("s:netrwmarkfilelist[".(exists("s:netrwmarkfilelist")? string(s:netrwmarkfilelist) : "")."] (avail in all buffers)",'~'.expand("<slnum>"))
+"  call Dret("s:NetrwMarkFile : s:netrwmarkfilelist_".curbufnr."<".(exists("s:netrwmarkfilelist_{curbufnr}")? string(s:netrwmarkfilelist_{curbufnr}) : " doesn't exist").">  (buf#".curbufnr."list)")
 endfun
 
 " ---------------------------------------------------------------------
@@ -7573,8 +7595,9 @@ fun! s:NetrwMarkFileGrep(islocal)
   let curdir   = s:NetrwGetCurdir(a:islocal)
 
   if exists("s:netrwmarkfilelist")
-"  call Decho("s:netrwmarkfilelist".string(s:netrwmarkfilelist).">",'~'.expand("<slnum>"))
+"   call Decho("using s:netrwmarkfilelist".string(s:netrwmarkfilelist).">",'~'.expand("<slnum>"))
    let netrwmarkfilelist= join(map(deepcopy(s:netrwmarkfilelist), "fnameescape(v:val)"))
+"   call Decho("keeping copy of s:netrwmarkfilelist in function-local variable,'~'.expand("<slnum>"))"
    call s:NetrwUnmarkAll()
   else
 "   call Decho('no marked files, using "*"','~'.expand("<slnum>"))
@@ -7582,6 +7605,7 @@ fun! s:NetrwMarkFileGrep(islocal)
   endif
 
   " ask user for pattern
+"  call Decho("ask user for search pattern",'~'.expand("<slnum>"))
   call inputsave()
   let pat= input("Enter pattern: ","")
   call inputrestore()
@@ -9560,6 +9584,7 @@ fun! s:NetrwWideListing()
    let newcolend   = newcolstart + fpc - 1
 "   call Decho("bannercnt=".w:netrw_bannercnt." fpl=".w:netrw_fpl." fpc=".fpc." newcol[".newcolstart.",".newcolend."]",'~'.expand("<slnum>"))
    if has("clipboard")
+"    call Decho("(s:NetrwWideListing) save @* and @+",'~'.expand("<slnum>"))
     sil! let keepregstar = @*
     sil! let keepregplus = @+
    endif
@@ -9576,6 +9601,7 @@ fun! s:NetrwWideListing()
     exe 'sil! NetrwKeepj '.w:netrw_bannercnt
    endwhile
    if has("clipboard")
+"    call Decho("(s:NetrwWideListing) restore @* and @+",'~'.expand("<slnum>"))
     sil! let @*= keepregstar
     sil! let @+= keepregplus
    endif
@@ -10849,7 +10875,6 @@ fun! s:LocalListing()
   for filename in filelist
 "   call Decho(" ",'~'.expand("<slnum>"))
 "   call Decho("for filename in filelist: filename<".filename.">",'~'.expand("<slnum>"))
-"   call DechoBuf(bufnr("%"),"COMBAK#1")
 
    if getftype(filename) == "link"
     " indicate a symbolic link
@@ -10907,10 +10932,10 @@ fun! s:LocalListing()
 
    if w:netrw_liststyle == s:LONGLIST
     let sz   = getfsize(filename)
+    let fsz  = strpart("               ",1,15-strlen(sz)).sz
     if g:netrw_sizestyle =~# "[hH]"
      let sz= s:NetrwHumanReadable(sz)
     endif
-    let fsz     = strpart("               ",1,15-strlen(sz)).sz
     let longfile= printf("%-".(g:netrw_maxfilenamelen+1)."s",pfile)
     let pfile   = longfile.fsz." ".strftime(g:netrw_timefmt,getftime(filename))
 "    call Decho("longlist support: sz=".sz." fsz=".fsz,'~'.expand("<slnum>"))
@@ -10942,7 +10967,7 @@ fun! s:LocalListing()
 "    call Decho("exe NetrwKeepj put ='".pfile."'",'~'.expand("<slnum>"))
     sil! NetrwKeepj put=pfile
    endif
-"   call DechoBuf(bufnr("%"),"COMBAK#2")
+"   call DechoBuf(bufnr("%"),"bufnr(%)")
   endfor
 
   " cleanup any windows mess at end-of-line
@@ -11259,7 +11284,9 @@ fun! netrw#Expose(varname)
 "   call Dfunc("netrw#Expose(varname<".a:varname.">)")
   if exists("s:".a:varname)
    exe "let retval= s:".a:varname
+"   call Decho("retval=".retval,'~'.expand("<slnum>"))
    if exists("g:netrw_pchk")
+"    call Decho("type(g:netrw_pchk=".g:netrw_pchk.")=".type(retval),'~'.expand("<slnum>"))
     if type(retval) == 3
      let retval = copy(retval)
      let i      = 0
@@ -11268,10 +11295,13 @@ fun! netrw#Expose(varname)
       let i        = i + 1
      endwhile
     endif
-"     call Dret("netrw#Expose ".string(retval))
+"     call Dret("netrw#Expose ".string(retval)),'~'.expand("<slnum>"))
     return string(retval)
+   else
+"    call Decho("g:netrw_pchk doesn't exist",'~'.expand("<slnum>"))
    endif
   else
+"   call Decho("s:".a:varname." doesn't exist",'~'.expand("<slnum>"))
    let retval= "n/a"
   endif
 

runtime/autoload/netrw_gitignore.vim

@@ -18,61 +18,5 @@
 "               holder be liable for any damages resulting from the use
 "               of this software.
 function! netrw_gitignore#Hide(...)
-  let additional_files = a:000
-
-  let default_files = ['.gitignore', '.git/info/exclude']
-
-  " get existing global/system gitignore files
-  let global_gitignore = expand(substitute(system("git config --global core.excludesfile"), '\n', '', 'g'))
-  if global_gitignore !=# ''
-    let default_files = add(default_files, global_gitignore)
-  endif
-  let system_gitignore = expand(substitute(system("git config --system core.excludesfile"), '\n', '', 'g'))
-  if system_gitignore !=# ''
-    let default_files = add(default_files, system_gitignore)
-  endif
-
-  " append additional files if given as function arguments
-  if additional_files !=# []
-    let files = extend(default_files, additional_files)
-  else
-    let files = default_files
-  endif
-
-  " keep only existing/readable files
-  let gitignore_files = []
-  for file in files
-    if filereadable(file)
-      let gitignore_files = add(gitignore_files, file)
-    endif
-  endfor
-
-  " get contents of gitignore patterns from those files
-  let gitignore_lines = []
-  for file in gitignore_files
-    for line in readfile(file)
-      " filter empty lines and comments
-      if line !~# '^#' && line !~# '^$'
-        let gitignore_lines = add(gitignore_lines, line)
-      endif
-    endfor
-  endfor
-
-  " convert gitignore patterns to Netrw/Vim regex patterns
-  let escaped_lines = []
-  for line in gitignore_lines
-    let escaped = line
-    let escaped = substitute(escaped, '\*\*', '*', 'g')
-    let escaped = substitute(escaped, '\.', '\\.', 'g')
-    let escaped = substitute(escaped, '\$', '\\$', 'g')
-    let escaped = substitute(escaped, '*', '.*', 'g')
-    " correction: dot, dollar and asterisks chars shouldn't be escaped when
-    " within regex matching groups.
-    let escaped = substitute(escaped, '\(\[[^]]*\)\zs\\\.', '\.', 'g')
-    let escaped = substitute(escaped, '\(\[[^]]*\)\zs\\\$', '\$', 'g')
-    let escaped = substitute(escaped, '\(\[[^]]*\)\zs\.\*', '*', 'g')
-    let escaped_lines = add(escaped_lines, escaped)
-  endfor
-
-  return join(escaped_lines, ',')
+  return substitute(substitute(system('git ls-files --other --ignored --exclude-standard --directory'), '\n', ',', 'g'), ',$', '', '')
 endfunction

runtime/autoload/tohtml.vim

@@ -1,6 +1,6 @@
 " Vim autoload file for the tohtml plugin.
 " Maintainer: Ben Fritz <fritzophrenic@gmail.com>
-" Last Change: 2018 Nov 11
+" Last Change: 2019 Aug 16
 "
 " Additional contributors:
 "
@@ -364,6 +364,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
   let body_line = ''
 
   let html = []
+  let s:html5 = 0
   if s:settings.use_xhtml
     call add(html, xml_line)
   endif
@@ -371,8 +372,9 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     call add(html, "<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Transitional//EN\" \"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd\">")
     call add(html, '<html xmlns="http://www.w3.org/1999/xhtml">')
   elseif s:settings.use_css && !s:settings.no_pre
-    call add(html, "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\" \"http://www.w3.org/TR/html4/strict.dtd\">")
+    call add(html, "<!DOCTYPE html>")
     call add(html, '<html>')
+    let s:html5 = 1
   else
     call add(html, '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"')
     call add(html, '  "http://www.w3.org/TR/html4/loose.dtd">')
@@ -383,7 +385,11 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
   " include encoding as close to the top as possible, but only if not already
   " contained in XML information
   if s:settings.encoding != "" && !s:settings.use_xhtml
-    call add(html, "<meta http-equiv=\"content-type\" content=\"text/html; charset=" . s:settings.encoding . '"' . tag_close)
+    if s:html5
+      call add(html, '<meta charset="' . s:settings.encoding . '"' . tag_close)
+    else
+      call add(html, "<meta http-equiv=\"content-type\" content=\"text/html; charset=" . s:settings.encoding . '"' . tag_close)
+    endif
   endif
 
   call add(html, '<title>diff</title>')
@@ -392,6 +398,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
   call add(html, '<meta name="settings" content="'.
 	\ join(filter(keys(s:settings),'s:settings[v:val]'),',').
 	\ ',prevent_copy='.s:settings.prevent_copy.
+	\ ',use_input_for_pc='.s:settings.use_input_for_pc.
 	\ '"'.tag_close)
   call add(html, '<meta name="colorscheme" content="'.
 	\ (exists('g:colors_name')
@@ -400,16 +407,8 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 
   call add(html, '</head>')
   let body_line_num = len(html)
-  if !empty(s:settings.prevent_copy)
-    call add(html, "<body onload='FixCharWidth();".(s:settings.line_ids ? " JumpToLine();" : "")."'>")
-    call add(html, "<!-- hidden divs used by javascript to get the width of a char -->")
-    call add(html, "<div id='oneCharWidth'>0</div>")
-    call add(html, "<div id='oneInputWidth'><input size='1' value='0'".tag_close."</div>")
-    call add(html, "<div id='oneEmWidth' style='width: 1em;'></div>")
-  else
-    call add(html, '<body'.(s:settings.line_ids ? ' onload="JumpToLine();"' : '').'>')
-  endif
-  call add(html, "<table border='1' width='100%' id='vimCodeElement".s:settings.id_suffix."'>")
+  call add(html, '<body'.(s:settings.line_ids ? ' onload="JumpToLine();"' : '').'>')
+  call add(html, "<table ".(s:settings.use_css? "" : "border='1' width='100%' ")."id='vimCodeElement".s:settings.id_suffix."'>")
 
   call add(html, '<tr>')
   for buf in a:win_list
@@ -443,7 +442,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     " Grab the style information. Some of this will be duplicated so only insert
     " it if it's not already there. {{{
     1
-    let style_start = search('^<style type="text/css">')
+    let style_start = search('^<style\( type="text/css"\)\?>')
     1
     let style_end = search('^</style>')
     if style_start > 0 && style_end > 0
@@ -481,7 +480,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     " TODO: restore using grabbed lines if undolevel is 1?
     normal! 2u
     if s:settings.use_css
-      call add(html, '<td valign="top"><div>')
+      call add(html, '<td><div>')
     elseif s:settings.use_xhtml
       call add(html, '<td nowrap="nowrap" valign="top"><div>')
     else
@@ -515,7 +514,13 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     let name = substitute(name, '\d*\.x\?html$', '', '') . i . '.' . fnamemodify(copy(name), ":t:e")
     let i += 1
   endwhile
+
+  let s:ei_sav = &eventignore
+  set eventignore+=FileType
   exe "topleft new " . name
+  let &eventignore=s:ei_sav
+  unlet s:ei_sav
+
   setlocal modifiable
 
   " just in case some user autocmd creates content in the new buffer, make sure
@@ -544,7 +549,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     " add required javascript in reverse order so we can just call append again
     " and again without adjusting {{{
 
-    let s:uses_script = s:settings.dynamic_folds || s:settings.line_ids || !empty(s:settings.prevent_copy)
+    let s:uses_script = s:settings.dynamic_folds || s:settings.line_ids
 
     " insert script closing tag if needed
     if s:uses_script
@@ -555,31 +560,6 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ ])
     endif
 
-    " insert script which corrects the size of small input elements in
-    " prevent_copy mode. See 2html.vim for details on why this is needed and how
-    " it works.
-    if !empty(s:settings.prevent_copy)
-      call append(style_start, [
-	    \ '',
-	    \ '/* simulate a "ch" unit by asking the browser how big a zero character is */',
-	    \ 'function FixCharWidth() {',
-	    \ '  /* get the hidden element which gives the width of a single character */',
-	    \ '  var goodWidth = document.getElementById("oneCharWidth").clientWidth;',
-	    \ '  /* get all input elements, we''ll filter on class later */',
-	    \ '  var inputTags = document.getElementsByTagName("input");',
-	    \ '  var ratio = 5;',
-	    \ '  var inputWidth = document.getElementById("oneInputWidth").clientWidth;',
-	    \ '  var emWidth = document.getElementById("oneEmWidth").clientWidth;',
-	    \ '  if (inputWidth > goodWidth) {',
-	    \ '    while (ratio < 100*goodWidth/emWidth && ratio < 100) {',
-	    \ '      ratio += 5;',
-	    \ '    }',
-	    \ '    document.getElementById("vimCodeElement'.s:settings.id_suffix.'").className = "em"+ratio;',
-	    \ '  }',
-	    \ '}'
-	    \ ])
-    endif
-
     " insert javascript to get IDs from line numbers, and to open a fold before
     " jumping to any lines contained therein
     if s:settings.line_ids
@@ -659,10 +639,9 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     endif
 
     if s:uses_script
-      " insert script tag; javascript is always needed for the line number
-      " normalization for URL hashes
+      " insert script tag if needed
       call append(style_start, [
-	    \ "<script type='text/javascript'>",
+	    \ "<script" . (s:html5 ? "" : " type='text/javascript'") . ">",
 	    \ s:settings.use_xhtml ? '//<![CDATA[' : "<!--"])
     endif
 
@@ -673,11 +652,13 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     " is pretty useless for really long lines. {{{
     if s:settings.use_css
       call append(style_start,
-	    \ ['<style type="text/css">']+
+	    \ ['<style' . (s:html5 ? '' : 'type="text/css"') . '>']+
 	    \ style+
 	    \ [ s:settings.use_xhtml ? '' : '<!--',
 	    \   'table { table-layout: fixed; }',
 	    \   'html, body, table, tbody { width: 100%; margin: 0; padding: 0; }',
+	    \   'table, td, th { border: 1px solid; }',
+	    \   'td { vertical-align: top; }',
 	    \   'th, td { width: '.printf("%.1f",100.0/len(a:win_list)).'%; }',
 	    \   'td div { overflow: auto; }',
 	    \   s:settings.use_xhtml ? '' : '-->',
@@ -720,21 +701,22 @@ func! tohtml#GetUserSettings() "{{{
     endif
 
     " get current option settings with appropriate defaults {{{
-    call tohtml#GetOption(user_settings,    'no_progress', !has("statusline") )
-    call tohtml#GetOption(user_settings,  'diff_one_file', 0 )
-    call tohtml#GetOption(user_settings,   'number_lines', &number )
-    call tohtml#GetOption(user_settings,       'pre_wrap', &wrap )
-    call tohtml#GetOption(user_settings,        'use_css', 1 )
-    call tohtml#GetOption(user_settings, 'ignore_conceal', 0 )
-    call tohtml#GetOption(user_settings, 'ignore_folding', 0 )
-    call tohtml#GetOption(user_settings,  'dynamic_folds', 0 )
-    call tohtml#GetOption(user_settings,  'no_foldcolumn', user_settings.ignore_folding)
-    call tohtml#GetOption(user_settings,   'hover_unfold', 0 )
-    call tohtml#GetOption(user_settings,         'no_pre', 0 )
-    call tohtml#GetOption(user_settings,     'no_invalid', 0 )
-    call tohtml#GetOption(user_settings,   'whole_filler', 0 )
-    call tohtml#GetOption(user_settings,      'use_xhtml', 0 )
-    call tohtml#GetOption(user_settings,       'line_ids', user_settings.number_lines )
+    call tohtml#GetOption(user_settings,       'no_progress', !has("statusline") )
+    call tohtml#GetOption(user_settings,     'diff_one_file', 0 )
+    call tohtml#GetOption(user_settings,      'number_lines', &number )
+    call tohtml#GetOption(user_settings,          'pre_wrap', &wrap )
+    call tohtml#GetOption(user_settings,           'use_css', 1 )
+    call tohtml#GetOption(user_settings,    'ignore_conceal', 0 )
+    call tohtml#GetOption(user_settings,    'ignore_folding', 0 )
+    call tohtml#GetOption(user_settings,     'dynamic_folds', 0 )
+    call tohtml#GetOption(user_settings,     'no_foldcolumn', user_settings.ignore_folding)
+    call tohtml#GetOption(user_settings,      'hover_unfold', 0 )
+    call tohtml#GetOption(user_settings,            'no_pre', 0 )
+    call tohtml#GetOption(user_settings,        'no_invalid', 0 )
+    call tohtml#GetOption(user_settings,      'whole_filler', 0 )
+    call tohtml#GetOption(user_settings,         'use_xhtml', 0 )
+    call tohtml#GetOption(user_settings,          'line_ids', user_settings.number_lines )
+    call tohtml#GetOption(user_settings, 'use_input_for_pc', 'fallback')
     " }}}
     
     " override those settings that need it {{{
@@ -868,6 +850,16 @@ func! tohtml#GetUserSettings() "{{{
       let user_settings.no_invalid = 0
     endif
 
+    " enforce valid values for use_input_for_pc
+    if user_settings.use_input_for_pc !~# 'fallback\|none\|all'
+      let user_settings.use_input_for_pc = 'fallback'
+      echohl WarningMsg
+      echomsg '2html: "' . g:html_use_input_for_pc . '" is not valid for g:html_use_input_for_pc'
+      echomsg '2html: defaulting to "' . user_settings.use_input_for_pc . '"'
+      echohl None
+      sleep 3
+    endif
+
     if exists('g:html_id_expr')
       let user_settings.id_suffix = eval(g:html_id_expr)
       if user_settings.id_suffix !~ '^[-_:.A-Za-z0-9]*$'

runtime/autoload/xmlformat.vim

@@ -1,6 +1,6 @@
 " Vim plugin for formatting XML
-" Last Change: Thu, 07 Dec 2018
-"     Version: 0.1
+" Last Change: 2019 Oct 24
+"     Version: 0.2
 "      Author: Christian Brabandt <cb@256bit.org>
 "  Repository: https://github.com/chrisbra/vim-xml-ftplugin
 "     License: VIM License
@@ -22,44 +22,73 @@ func! xmlformat#Format()
     " do not fall back to internal formatting
     return 0
   endif
+  let count_orig = v:count
   let sw  = shiftwidth()
   let prev = prevnonblank(v:lnum-1)
   let s:indent = indent(prev)/sw
   let result = []
   let lastitem = prev ? getline(prev) : ''
   let is_xml_decl = 0
-  " split on `<`, but don't split on very first opening <
-  for item in split(join(getline(v:lnum, (v:lnum + v:count - 1))), '.\@<=[>]\zs')
-    if s:EndTag(item)
-      let s:indent = s:DecreaseIndent()
-      call add(result, s:Indent(item))
-    elseif s:EmptyTag(lastitem)
-      call add(result, s:Indent(item))
-    elseif s:StartTag(lastitem) && s:IsTag(item)
-      let s:indent += 1
-      call add(result, s:Indent(item))
-     else
-       if !s:IsTag(item)
-         " Simply split on '<'
-         let t=split(item, '.<\@=\zs')
-         let s:indent+=1
-         call add(result, s:Indent(t[0]))
-         let s:indent = s:DecreaseIndent()
-         call add(result, s:Indent(t[1]))
-       else
+  " go through every line, but don't join all content together and join it
+  " back. We might lose empty lines
+  let list = getline(v:lnum, (v:lnum + count_orig - 1))
+  let current = 0
+  for line in list
+    " Keep empty input lines?
+    if empty(line)
+      call add(result, '')
+      continue
+    elseif line !~# '<[/]\?[^>]*>'
+      let nextmatch = match(list, '<[/]\?[^>]*>', current)
+      let line .= join(list[(current + 1):(nextmatch-1)], "\n")
+      call remove(list, current+1, nextmatch-1)
+    endif
+    " split on `>`, but don't split on very first opening <
+    " this means, items can be like ['<tag>', 'tag content</tag>']
+    for item in split(line, '.\@<=[>]\zs')
+      if s:EndTag(item)
+        let s:indent = s:DecreaseIndent()
         call add(result, s:Indent(item))
+      elseif s:EmptyTag(lastitem)
+        call add(result, s:Indent(item))
+      elseif s:StartTag(lastitem) && s:IsTag(item)
+        let s:indent += 1
+        call add(result, s:Indent(item))
+      else
+        if !s:IsTag(item)
+          " Simply split on '<', if there is one,
+          " but reformat according to &textwidth
+          let t=split(item, '.<\@=\zs')
+          " t should only contain 2 items, but just be safe here
+          if s:IsTag(lastitem)
+            let s:indent+=1
+          endif
+          let result+=s:FormatContent([t[0]])
+          if s:EndTag(t[1])
+            let s:indent = s:DecreaseIndent()
+          endif
+          "for y in t[1:]
+            let result+=s:FormatContent(t[1:])
+          "endfor
+        else
+          call add(result, s:Indent(item))
+        endif
       endif
-     endif
-     let lastitem = item
-   endfor
+      let lastitem = item
+    endfor
+    let current += 1
+  endfor
 
-   if !empty(result)
-    exe v:lnum. ",". (v:lnum + v:count - 1). 'd'
+  if !empty(result)
+    let lastprevline = getline(v:lnum + count_orig)
+    let delete_lastline = v:lnum + count_orig - 1 == line('$')
+    exe v:lnum. ",". (v:lnum + count_orig - 1). 'd'
     call append(v:lnum - 1, result)
     " Might need to remove the last line, if it became empty because of the
     " append() call
     let last = v:lnum + len(result)
-    if getline(last) is ''
+    " do not use empty(), it returns true for `empty(0)`
+    if getline(last) is '' && lastprevline is '' && delete_lastline
       exe last. 'd'
     endif
   endif
@@ -88,6 +117,7 @@ func! s:StartTag(tag)
   let is_comment = s:IsComment(a:tag)
   return a:tag =~? '^\s*<[^/?]' && !is_comment
 endfunc
+" Check if tag is a Comment start {{{1
 func! s:IsComment(tag)
   return a:tag =~? '<!--'
 endfunc
@@ -108,6 +138,43 @@ endfunc
 func! s:EmptyTag(tag)
   return a:tag =~ '/>\s*$'
 endfunc
+" Format input line according to textwidth {{{1
+func! s:FormatContent(list)
+  let result=[]
+  let limit = 80
+  if &textwidth > 0
+    let limit = &textwidth
+  endif
+  let column=0
+  let idx = -1
+  let add_indent = 0
+  let cnt = 0
+  for item in a:list
+    for word in split(item, '\s\+\S\+\zs') 
+      let column += strdisplaywidth(word, column)
+      if match(word, "^\\s*\n\\+\\s*$") > -1
+        call add(result, '')
+        let idx += 1
+        let column = 0
+        let add_indent = 1
+      elseif column > limit || cnt == 0
+        let add = s:Indent(s:Trim(word))
+        call add(result, add)
+        let column = strdisplaywidth(add)
+        let idx += 1
+      else
+        if add_indent
+          let result[idx] = s:Indent(s:Trim(word))
+        else
+          let result[idx] .= ' '. s:Trim(word)
+        endif
+        let add_indent = 0
+      endif
+      let cnt += 1
+    endfor
+  endfor
+  return result
+endfunc
 " Restoration And Modelines: {{{1
 let &cpo= s:keepcpo
 unlet s:keepcpo

runtime/defaults.vim

@@ -1,7 +1,7 @@
 " The default vimrc file.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2019 Feb 18
+" Last change:	2019 Oct 27
 "
 " This is loaded if no vimrc file was found.
 " Except when Vim is run with "-u NONE" or "-C".
@@ -75,8 +75,14 @@ inoremap <C-U> <C-G>u<C-U>
 
 " In many terminal emulators the mouse works just fine.  By enabling it you
 " can position the cursor, Visually select and scroll with the mouse.
+" Only xterm can grab the mouse events when using the shift key, for other
+" terminals use ":", select text and press Esc.
 if has('mouse')
-  set mouse=a
+  if &term =~ 'xterm'
+    set mouse=a
+  else
+    set mouse=nvi
+  endif
 endif
 
 " Switch syntax highlighting on when the terminal has colors or when using the

runtime/delmenu.vim

@@ -2,7 +2,7 @@
 " Warning: This also deletes all menus defined by the user!
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2001 May 27
+" Last Change:	2019 Sep 11
 
 aunmenu *
 tlunmenu *
@@ -21,6 +21,11 @@ silent! unlet menutrans_path_dialog
 silent! unlet menutrans_tags_dialog
 silent! unlet menutrans_textwidth_dialog
 silent! unlet menutrans_fileformat_dialog
+silent! unlet menutrans_fileformat_choices
 silent! unlet menutrans_no_file
+silent! unlet menutrans_set_lang_to
+silent! unlet menutrans_spell_change_ARG_to
+silent! unlet menutrans_spell_add_ARG_to_word_list
+silent! unlet menutrans_spell_ignore_ARG
 
 " vim: set sw=2 :

runtime/doc/Makefile

@@ -323,7 +323,10 @@ all: tags vim.man evim.man vimdiff.man vimtutor.man xxd.man $(CONVERTED)
 # Use Vim to generate the tags file.  Can only be used when Vim has been
 # compiled and installed.  Supports multiple languages.
 vimtags: $(DOCS)
-	$(VIMEXE) -u NONE -esX -c "helptags ++t ." -c quit
+	@if command -v $(VIMEXE); then \
+	    $(VIMEXE) --clean -eX -u doctags.vim >/dev/null && \
+	      echo "help tags updated"; \
+	  else echo "vim executable $(VIMEXE) not found; help tags not updated"; fi
 
 # Use "doctags" to generate the tags file.  Only works for English!
 tags: doctags $(DOCS)

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.1.  Last change: 2019 Jun 26
+*autocmd.txt*   For Vim version 8.1.  Last change: 2019 Sep 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -268,7 +268,6 @@ Name			triggered by ~
 |BufCreate|		just after adding a buffer to the buffer list
 |BufDelete|		before deleting a buffer from the buffer list
 |BufWipeout|		before completely deleting a buffer
-|TerminalOpen|		after a terminal buffer was created
 
 |BufFilePre|		before changing the name of the current buffer
 |BufFilePost|		after changing the name of the current buffer
@@ -302,6 +301,10 @@ Name			triggered by ~
 |VimLeavePre|		before exiting Vim, before writing the viminfo file
 |VimLeave|		before exiting Vim, after writing the viminfo file
 
+	Terminal
+|TerminalOpen|		after a terminal buffer was created
+|TerminalWinOpen|	after a terminal buffer was created in a new window
+
 	Various
 |FileChangedShell|	Vim notices that a file changed since editing started
 |FileChangedShellPost|	After handling a file changed since editing started
@@ -355,6 +358,10 @@ Name			triggered by ~
 			when popup menu visible
 |TextYankPost|		after text has been yanked or deleted
 
+|SafeState|		nothing pending, going to wait for the user to type a
+			character
+|SafeStateAgain|	repeated SafeState
+
 |ColorSchemePre|	before loading a color scheme
 |ColorScheme|		after loading a color scheme
 
@@ -554,16 +561,14 @@ CmdlineLeave			Before leaving the command line.
 							*CmdwinEnter*
 CmdwinEnter			After entering the command-line window.
 				Useful for setting options specifically for
-				this special type of window.  This is
-				triggered _instead_ of BufEnter and WinEnter.
+				this special type of window.
 				<afile> is set to a single character,
 				indicating the type of command-line.
 				|cmdwin-char|
 							*CmdwinLeave*
 CmdwinLeave			Before leaving the command-line window.
 				Useful to clean up any global setting done
-				with CmdwinEnter.  This is triggered _instead_
-				of BufLeave and WinLeave.
+				with CmdwinEnter.
 				<afile> is set to a single character,
 				indicating the type of command-line.
 				|cmdwin-char|
@@ -579,7 +584,7 @@ ColorScheme			After loading a color scheme. |:colorscheme|
 ColorSchemePre			Before loading a color scheme. |:colorscheme|
 				Useful to setup removing things added by a
 				color scheme, before another one is loaded.
-CompleteChanged 					*CompleteChanged*
+CompleteChanged						*CompleteChanged*
 				After each time the Insert mode completion
 				menu changed.  Not fired on popup menu hide,
 				use |CompleteDone| for that.  Never triggered
@@ -957,6 +962,32 @@ RemoteReply			When a reply from a Vim that functions as
 				Note that even if an autocommand is defined,
 				the reply should be read with |remote_read()|
 				to consume it.
+							*SafeState*
+SafeState			When nothing is pending, going to wait for the
+				user to type a character.
+				This will not be triggered when:
+				- an operator is pending
+				- a register was entered with "r
+				- halfway executing a command
+				- executing a mapping
+				- there is typeahead
+				- Insert mode completion is active
+				- Command line completion is active
+				You can use `mode()` to find out what state
+				Vim is in.  That may be:
+				- VIsual mode
+				- Normal mode
+				- Insert mode
+				- Command-line mode
+				Depending on what you want to do, you may also
+				check more with `state()`, e.g. whether the
+				screen was scrolled for messages.
+							*SafeStateAgain*
+SafeStateAgain			Like SafeState but after processing any
+				messages and invoking callbacks. This may be
+				triggered often, don't do something that takes
+				time.
+
 							*SessionLoadPost*
 SessionLoadPost			After loading the session file created using
 				the |:mksession| command.
@@ -1053,6 +1084,12 @@ TerminalOpen			Just after a terminal buffer was created, with
 				`:terminal` or |term_start()|. This event is
 				triggered even if the buffer is created
 				without a window, with the ++hidden option.
+							*TerminalWinOpen*
+TerminalWinOpen			Just after a terminal buffer was created, with
+				`:terminal` or |term_start()|. This event is
+				triggered only if the buffer is created
+				with a window.  Can be used to set window
+				local options for the terminal window.
 							*TermResponse*
 TermResponse			After the response to |t_RV| is received from
 				the terminal.  The value of |v:termresponse|
@@ -1089,8 +1126,8 @@ TextYankPost			After text has been yanked or deleted in the
 				current buffer.  The following values of
 				|v:event| can be used to determine the operation
 				that triggered this autocmd:
-				   operator    	The operation performed.
-				   regcontents 	Text that was stored in the
+				   operator	The operation performed.
+				   regcontents	Text that was stored in the
 						register, as a list of lines,
 						like with: >
 						getreg(r, 1, 1)
@@ -1126,7 +1163,7 @@ VimEnter			After doing all the startup stuff, including
 				   if v:vim_did_enter
 				     call s:init()
 				   else
- 	  			     au VimEnter * call s:init()
+				     au VimEnter * call s:init()
 				   endif
 <							*VimLeave*
 VimLeave			Before exiting Vim, just after writing the

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 8.1.  Last change: 2019 Aug 21
+*change.txt*    For Vim version 8.1.  Last change: 2019 Sep 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -999,9 +999,13 @@ inside of strings can change!  Also see 'softtabstop' option. >
 			delete and yank) ({.%#:} only work with put).
 
 							*:reg* *:registers*
-:reg[isters]		Display the contents of all numbered and named
-			registers.  If a register is written to for |:redir|
-			it will not be listed.
+:reg[isters]		Display the type and contents of all numbered and
+			named registers.  If a register is written to for
+			|:redir| it will not be listed.
+			Type can be one of:
+			"c"	for |characterwise| text
+			"l"	for |linewise| text
+			"b"	for |blockwise-visual| text
 
 
 :reg[isters] {arg}	Display the contents of the numbered and named
@@ -1172,7 +1176,7 @@ Rationale:	In Vi the "y" command followed by a backwards motion would
 With a linewise yank command the cursor is put in the first line, but the
 column is unmodified, thus it may not be on the first yanked character.
 
-There are ten types of registers:			*registers* *E354*
+There are ten types of registers:		*registers* *{register}* *E354*
 1. The unnamed register ""
 2. 10 numbered registers "0 to "9
 3. The small delete register "-
@@ -1312,7 +1316,7 @@ When writing to this register, nothing happens.  This can be used to delete
 text without affecting the normal registers.  When reading from this register,
 nothing is returned.
 
-10. Last search pattern register	"/			*quote_/* *quote/*
+10. Last search pattern register	"/		*quote_/* *quote/*
 Contains the most recent search-pattern.  This is used for "n" and 'hlsearch'.
 It is writable with `:let`, you can change it to have 'hlsearch' highlight
 other matches without actually searching.  You can't yank or delete into this
@@ -1618,8 +1622,6 @@ By default, "b:#" is included.  This means that a line that starts with
 "#include" is not recognized as a comment line.  But a line that starts with
 "# define" is recognized.  This is a compromise.
 
-{not available when compiled without the |+comments| feature}
-
 							*fo-table*
 You can use the 'formatoptions' option  to influence how Vim formats text.
 'formatoptions' is a string that can contain any of the letters below.  The

runtime/doc/channel.txt

@@ -1,4 +1,4 @@
-*channel.txt*      For Vim version 8.1.  Last change: 2019 Aug 22
+*channel.txt*      For Vim version 8.1.  Last change: 2019 Sep 11
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -508,6 +508,9 @@ ch_evalexpr({handle}, {expr} [, {options}])			*ch_evalexpr()*
 		expression.  When there is an error or timeout it returns an
 		empty string.
 
+		Note that while waiting for the response, Vim handles other
+		messages.  You need to make sure this doesn't cause trouble.
+
 		Can also be used as a |method|: >
 			GetChannel()->ch_evalexpr(expr)
 

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 8.1.  Last change: 2019 Sep 04
+*cmdline.txt*   For Vim version 8.1.  Last change: 2019 Sep 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -129,7 +129,7 @@ CTRL-K {char1} {char2}					*c_CTRL-K*
 		enter digraph (see |digraphs|).  When {char1} is a special
 		key, the code for that key is inserted in <> form.
 
-CTRL-R {0-9a-z"%#:-=.}					*c_CTRL-R* *c_<C-R>*
+CTRL-R {register}					*c_CTRL-R* *c_<C-R>*
 		Insert the contents of a numbered or named register.  Between
 		typing CTRL-R and the second character '"' will be displayed
 		to indicate that you are expected to enter the name of a
@@ -191,8 +191,8 @@ CTRL-R CTRL-L				*c_CTRL-R_CTRL-L* *c_<C-R>_<C-L>*
 
 					*c_CTRL-R_CTRL-R* *c_<C-R>_<C-R>*
 					*c_CTRL-R_CTRL-O* *c_<C-R>_<C-O>*
-CTRL-R CTRL-R {0-9a-z"%#:-=. CTRL-F CTRL-P CTRL-W CTRL-A CTRL-L}
-CTRL-R CTRL-O {0-9a-z"%#:-=. CTRL-F CTRL-P CTRL-W CTRL-A CTRL-L}
+CTRL-R CTRL-R {register CTRL-F CTRL-P CTRL-W CTRL-A CTRL-L}
+CTRL-R CTRL-O {register CTRL-F CTRL-P CTRL-W CTRL-A CTRL-L}
 		Insert register or object under the cursor.  Works like
 		|c_CTRL-R| but inserts the text literally.  For example, if
 		register a contains "xy^Hz" (where ^H is a backspace),
@@ -1171,11 +1171,9 @@ edited as described in |cmdwin-char|.
 
 AUTOCOMMANDS
 
-Two autocommand events are used: |CmdwinEnter| and |CmdwinLeave|.  Since this
-window is of a special type, the WinEnter, WinLeave, BufEnter and BufLeave
-events are not triggered.  You can use the Cmdwin events to do settings
-specifically for the command-line window.  Be careful not to cause side
-effects!
+Two autocommand events are used: |CmdwinEnter| and |CmdwinLeave|.  You can use
+the Cmdwin events to do settings specifically for the command-line window.
+Be careful not to cause side effects!
 Example: >
 	:au CmdwinEnter :  let b:cpt_save = &cpt | set cpt=.
 	:au CmdwinLeave :  let &cpt = b:cpt_save

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 8.1.  Last change: 2019 Jul 27
+*diff.txt*      For Vim version 8.1.  Last change: 2019 Nov 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -68,11 +68,12 @@ reset to the global value.
 The options can still be overruled from a modeline when re-editing the file.
 However, 'foldmethod' and 'wrap' won't be set from a modeline when 'diff' is
 set.
+See `:diffoff` for an easy way to revert the options.
 
 The differences shown are actually the differences in the buffer.  Thus if you
 make changes after loading a file, these will be included in the displayed
 diffs.  You might have to do ":diffupdate" now and then, not all changes are
-immediately taken into account.
+immediately taken into account, especially when using an external diff command.
 
 In your .vimrc file you could do something special when Vim was started in
 diff mode.  You could use a construct like this: >

runtime/doc/doctags.vim

@@ -0,0 +1,6 @@
+" This script makes a tags file for help text.
+"
+" Usage: vim -eX -u doctags.vim
+
+helptags ++t .
+qa!

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.1.  Last change: 2019 Jun 10
+*editing.txt*   For Vim version 8.1.  Last change: 2019 Sep 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1554,7 +1554,7 @@ focus.
 If you want to automatically reload a file when it has been changed outside of
 Vim, set the 'autoread' option.  This doesn't work at the moment you write the
 file though, only when the file wasn't changed inside of Vim.
-
+							*ignore-timestamp*
 If you do not want to be asked or automatically reload the file, you can use
 this: >
 	set buftype=nofile

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.1.  Last change: 2019 Sep 06
+*eval.txt*	For Vim version 8.1.  Last change: 2019 Nov 21
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -92,7 +92,8 @@ the Number.  Examples:
 							*octal*
 Conversion from a String to a Number is done by converting the first digits to
 a number.  Hexadecimal "0xf9", Octal "017", and Binary "0b10" numbers are
-recognized.  If the String doesn't start with digits, the result is zero.
+recognized (NOTE: when using |scriptversion-4| octal is not recognized).  If
+the String doesn't start with digits, the result is zero.
 Examples:
 	String "456"	-->	Number 456 ~
 	String "6bar"	-->	Number 6 ~
@@ -487,7 +488,7 @@ as a key.
 To avoid having to put quotes around every key the #{} form can be used.  This
 does require the key to consist only of ASCII letters, digits, '-' and '_'.
 Example: >
-	let mydict = #{zero: 0, one_key: 1, two-key: 2, 333: 3}
+	:let mydict = #{zero: 0, one_key: 1, two-key: 2, 333: 3}
 Note that 333 here is the string "333".  Empty keys are not possible with #{}.
 
 A value can be any expression.  Using a Dictionary for a value creates a
@@ -1661,6 +1662,10 @@ PREDEFINED VIM VARIABLES			*vim-variable* *v:var* *v:*
 								*E963*
 Some variables can be set by the user, but the type cannot be changed.
 
+					*v:argv* *argv-variable*
+v:argv		The command line arguments Vim was invoked with.  This is a
+		list of strings.  The first item is the Vim command.
+
 					*v:beval_col* *beval_col-variable*
 v:beval_col	The number of the column, over which the mouse pointer is.
 		This is the byte index in the |v:beval_lnum| line.
@@ -2475,6 +2480,7 @@ getline({lnum})			String	line {lnum} of current buffer
 getline({lnum}, {end})		List	lines {lnum} to {end} of current buffer
 getloclist({nr} [, {what}])	List	list of location list items
 getmatches([{win}])		List	list of current matches
+getmousepos()			Dict	last known mouse position
 getpid()			Number	process ID of Vim
 getpos({expr})			List	position of cursor, mark, etc.
 getqflist([{what}])		List	list of quickfix items
@@ -2594,7 +2600,7 @@ or({expr}, {expr})		Number	bitwise OR
 pathshorten({expr})		String	shorten directory names in a path
 perleval({expr})		any	evaluate |Perl| expression
 popup_atcursor({what}, {options}) Number create popup window near the cursor
-popup_beval({what}, {options}) 	Number 	create popup window for 'ballooneval'
+popup_beval({what}, {options})	Number	create popup window for 'ballooneval'
 popup_clear()			none	close all popup windows
 popup_close({id} [, {result}])	none	close popup window {id}
 popup_create({what}, {options}) Number	create a popup window
@@ -2661,7 +2667,7 @@ remote_read({serverid} [, {timeout}])
 remote_send({server}, {string} [, {idvar}])
 				String	send key sequence
 remote_startserver({name})	none	become server {name}
-remove({list}, {idx} [, {end}])	any/List 
+remove({list}, {idx} [, {end}])	any/List
 					remove items {idx}-{end} from {list}
 remove({blob}, {idx} [, {end}])	Number/Blob
 					remove bytes {idx}-{end} from {blob}
@@ -2754,15 +2760,17 @@ spellsuggest({word} [, {max} [, {capital}]])
 split({expr} [, {pat} [, {keepempty}]])
 				List	make |List| from {pat} separated {expr}
 sqrt({expr})			Float	square root of {expr}
+state([{what}])			String	current state of Vim
 str2float({expr})		Float	convert String to Float
 str2list({expr} [, {utf8}])	List	convert each character of {expr} to
 					ASCII/UTF8 value
-str2nr({expr} [, {base}])	Number	convert String to Number
+str2nr({expr} [, {base} [, {quoted}]])
+				Number	convert String to Number
 strchars({expr} [, {skipcc}])	Number	character length of the String {expr}
 strcharpart({str}, {start} [, {len}])
 				String	{len} characters of {str} at {start}
 strdisplaywidth({expr} [, {col}]) Number display length of the String {expr}
-strftime({format} [, {time}])	String	time in specified format
+strftime({format} [, {time}])	String	format time with a specified format
 strgetchar({str}, {index})	Number	get char {index} from {str}
 stridx({haystack}, {needle} [, {start}])
 				Number	index of {needle} in {haystack}
@@ -2770,6 +2778,8 @@ string({expr})			String	String representation of {expr} value
 strlen({expr})			Number	length of the String {expr}
 strpart({str}, {start} [, {len}])
 				String	{len} characters of {str} at {start}
+strptime({format}, {timestring})
+				Number	Convert {timestring} to unix timestamp
 strridx({haystack}, {needle} [, {start}])
 				Number	last index of {needle} in {haystack}
 strtrans({expr})		String	translate string to make it printable
@@ -2816,6 +2826,7 @@ term_gettty({buf}, [{input}])	String	get the tty name of a terminal
 term_list()			List	get the list of terminal buffers
 term_scrape({buf}, {row})	List	get row of a terminal screen
 term_sendkeys({buf}, {keys})	none	send keystrokes to a terminal
+term_setapi({buf}, {expr})	none	set |terminal-api| function name prefix
 term_setansicolors({buf}, {colors})
 				none	set ANSI palette in GUI color mode
 term_setkill({buf}, {how})	none	set signal to stop job in terminal
@@ -2875,6 +2886,8 @@ win_gotoid({expr})		Number	go to window with ID {expr}
 win_id2tabwin({expr})		List	get tab and window nr from window ID
 win_id2win({expr})		Number	get window nr from window ID
 win_screenpos({nr})		List	get screen position of window {nr}
+win_splitmove({nr}, {target} [, {options}])
+				Number	move window {nr} to split of {target}
 winbufnr({nr})			Number	buffer number of window {nr}
 wincol()			Number	window column of the cursor
 winheight({nr})			Number	height of window {nr}
@@ -2968,6 +2981,9 @@ append({lnum}, {text})					*append()*
 appendbufline({expr}, {lnum}, {text})			*appendbufline()*
 		Like |append()| but append the text in buffer {expr}.
 
+		This function works only for loaded buffers. First call
+		|bufload()| if needed.
+
 		For the use of {expr}, see |bufname()|.
 
 		{lnum} is used like with |append()|.  Note that using |line()|
@@ -3025,6 +3041,7 @@ argv([{nr} [, {winid}])
 		the whole |arglist| is returned.
 
 		The {winid} argument specifies the window ID, see |argc()|.
+		For the Vim command line arguments see |v:argv|.
 
 
 assert_ functions are documented here: |assert-functions-details|
@@ -3257,9 +3274,14 @@ bufnr([{expr} [, {create}]])
 		The result is the number of a buffer, as it is displayed by
 		the ":ls" command.  For the use of {expr}, see |bufname()|
 		above.
+
 		If the buffer doesn't exist, -1 is returned.  Or, if the
 		{create} argument is present and not zero, a new, unlisted,
-		buffer is created and its number is returned.
+		buffer is created and its number is returned.  Example: >
+			let newbuf = bufnr('Scratch001', 1)
+<		Using an empty name uses the current buffer. To create a new
+		buffer with an empty name use |bufadd()|.
+
 		bufnr("$") is the last buffer: >
 			:let last_buffer = bufnr("$")
 <		The result is a Number, which is the highest buffer number
@@ -3529,8 +3551,8 @@ complete({startcol}, {matches})			*complete()* *E785*
 <		This isn't very useful, but it shows how it works.  Note that
 		an empty string is returned to avoid a zero being inserted.
 
-		Can also be used as a |method|, the second argument is passed
-		in: >
+		Can also be used as a |method|, the base is passed as the
+		second argument: >
 			GetMatches()->complete(col('.'))
 
 complete_add({expr})				*complete_add()*
@@ -3665,7 +3687,7 @@ confirm({msg} [, {choices} [, {default} [, {type}]]])
 
 		Can also be used as a |method|in: >
 			BuildMessage()->confirm("&Yes\n&No")
-
+<
 							*copy()*
 copy({expr})	Make a copy of {expr}.  For Numbers and Strings this isn't
 		different from using {expr} directly.
@@ -3860,6 +3882,9 @@ deletebufline({expr}, {first} [, {last}])		*deletebufline()*
 		If {last} is omitted then delete line {first} only.
 		On success 0 is returned, on failure 1 is returned.
 
+		This function works only for loaded buffers. First call
+		|bufload()| if needed.
+
 		For the use of {expr}, see |bufname()| above.
 
 		{first} and {last} are used like with |getline()|. Note that
@@ -3868,7 +3893,7 @@ deletebufline({expr}, {first} [, {last}])		*deletebufline()*
 
 		Can also be used as a |method|: >
 			GetBuffer()->deletebufline(1)
-
+<
 							*did_filetype()*
 did_filetype()	Returns |TRUE| when autocommands are being executed and the
 		FileType event has been triggered at least once.  Can be used
@@ -4029,7 +4054,7 @@ exepath({expr})						*exepath()*
 
 		Can also be used as a |method|: >
 			GetCommand()->exepath()
-
+<
 							*exists()*
 exists({expr})	The result is a Number, which is |TRUE| if {expr} is defined,
 		zero otherwise.
@@ -4225,8 +4250,8 @@ expandcmd({expr})					*expandcmd()*
 		Expand special items in {expr} like what is done for an Ex
 		command such as `:edit`.  This expands special keywords, like
 		with |expand()|, and environment variables, anywhere in
-		{expr}.  Returns the expanded string.
-		Example: >
+		{expr}.  "~user" and "~/path" are only expanded at the start.
+		Returns the expanded string.  Example: >
 			:echo expandcmd('make %<.o')
 
 <		Can also be used as a |method|: >
@@ -4555,7 +4580,7 @@ foldlevel({lnum})					*foldlevel()*
 
 		Can also be used as a |method|: >
 			GetLnum()->foldlevel()
-
+<
 							*foldtext()*
 foldtext()	Returns a String, to be displayed for a closed fold.  This is
 		the default function used for the 'foldtext' option and should
@@ -4761,6 +4786,10 @@ getbufinfo([{dict}])
 			changed		TRUE if the buffer is modified.
 			changedtick	number of changes made to the buffer.
 			hidden		TRUE if the buffer is hidden.
+			lastused	timestamp in seconds, like
+					|localtime()|, when the buffer was
+					last used.
+					{only with the |+viminfo| feature}
 			listed		TRUE if the buffer is listed.
 			lnum		current line number in buffer.
 			loaded		TRUE if the buffer is loaded.
@@ -4892,8 +4921,9 @@ getchar([expr])						*getchar()*
 
 		When the user clicks a mouse button, the mouse event will be
 		returned.  The position can then be found in |v:mouse_col|,
-		|v:mouse_lnum|, |v:mouse_winid| and |v:mouse_win|.  This
-		example positions the mouse as it would normally happen: >
+		|v:mouse_lnum|, |v:mouse_winid| and |v:mouse_win|.
+		|getmousepos()| can also be used.  This example positions the
+		mouse as it would normally happen: >
 			let c = getchar()
 			if c == "\<LeftMouse>" && v:mouse_win > 0
 			  exe v:mouse_win . "wincmd w"
@@ -5303,6 +5333,35 @@ getmatches([{win}])					*getmatches()*
 			'pattern': 'FIXME', 'priority': 10, 'id': 2}] >
 			:unlet m
 <
+getmousepos()						*getmousepos()*
+		Returns a Dictionary with the last known position of the
+		mouse.  This can be used in a mapping for a mouse click or in
+		a filter of a popup window.  The items are:
+			screenrow	screen row
+			screencol	screen column
+			winid		Window ID of the click
+			winrow		row inside "winid"
+			wincol		column inside "winid"
+			line		text line inside "winid"
+			column		text column inside "winid"
+		All numbers are 1-based.
+
+		If not over a window, e.g. when in the command line, then only
+		"screenrow" and "screencol" are valid, the others are zero.
+
+		When on the status line below a window or the vertical
+		separater right of a window, the "line" and "column" values
+		are zero.
+
+		When the position is after the text then "column" is the
+		length of the text in bytes.
+
+		If the mouse is over a popup window then that window is used.
+
+
+		When using |getchar()| the Vim variables |v:mouse_lnum|,
+		|v:mouse_col| and |v:mouse_winid| also provide these values.
+
 							*getpid()*
 getpid()	Return a Number which is the process ID of the Vim process.
 		On Unix and MS-Windows this is a unique number, until Vim
@@ -5577,7 +5636,7 @@ getwininfo([{winid}])					*getwininfo()*
 			terminal	1 if a terminal window
 					{only with the +terminal feature}
 			tabnr		tab page number
-			topline		first displayed buffer line 
+			topline		first displayed buffer line
 			variables	a reference to the dictionary with
 					window-local variables
 			width		window width
@@ -5595,7 +5654,7 @@ getwininfo([{winid}])					*getwininfo()*
 
 getwinpos([{timeout}])					*getwinpos()*
 		The result is a list with two numbers, the result of
-		getwinposx() and getwinposy() combined:
+		|getwinposx()| and |getwinposy()| combined:
 			[x-pos, y-pos]
 		{timeout} can be used to specify how long to wait in msec for
 		a response from the terminal.  When omitted 100 msec is used.
@@ -5837,7 +5896,7 @@ histadd({history}, {item})				*histadd()*
 			:let date=input("Enter date: ")
 <		This function is not available in the |sandbox|.
 
-		Can also be used as a |method|, the base is used for the
+		Can also be used as a |method|, the base is passed as the
 		second argument: >
 			GetHistory()->histadd('search')
 
@@ -6365,8 +6424,8 @@ libcall({libname}, {funcname}, {argument})
 		Examples: >
 			:echo libcall("libc.so", "getenv", "HOME")
 
-<		Can also be used as a |method|, where the base is passed as
-		the argument to the called function: >
+<		Can also be used as a |method|, the base is passed as the
+		third argument: >
 			GetValue()->libcall("libc.so", "getenv")
 <
 							*libcallnr()*
@@ -6380,8 +6439,8 @@ libcallnr({libname}, {funcname}, {argument})
 			:call libcallnr("libc.so", "printf", "Hello World!\n")
 			:call libcallnr("libc.so", "sleep", 10)
 <
-		Can also be used as a |method|, where the base is passed as
-		the argument to the called function: >
+		Can also be used as a |method|, the base is passed as the
+		third argument: >
 			GetValue()->libcallnr("libc.so", "printf")
 <
 
@@ -6475,8 +6534,8 @@ listener_add({callback} [, {buf}])			*listener_add()*
 		    a:bufnr	the buffer that was changed
 		    a:start	first changed line number
 		    a:end	first line number below the change
-		    a:added	total number of lines added, negative if lines
-				were deleted
+		    a:added	number of lines added, negative if lines were
+				deleted
 		    a:changes	a List of items with details about the changes
 
 		Example: >
@@ -6532,8 +6591,8 @@ listener_add({callback} [, {buf}])			*listener_add()*
 		The {callback} is also not invoked when the buffer is
 		unloaded, use the |BufUnload| autocmd event for that.
 
-		Can also be used as a |method|, where the base is passed as
-		the second argument, the buffer: >
+		Can also be used as a |method|, the base is passed as the
+		second argument: >
 			GetBuffer()->listener_add(callback)
 
 listener_flush([{buf}])					*listener_flush()*
@@ -6557,7 +6616,7 @@ listener_remove({id})					*listener_remove()*
 
 localtime()						*localtime()*
 		Return the current time, measured as seconds since 1st Jan
-		1970.  See also |strftime()| and |getftime()|.
+		1970.  See also |strftime()|, |strptime()| and |getftime()|.
 
 
 log({expr})						*log()*
@@ -7003,6 +7062,7 @@ matchstrpos({expr}, {pat} [, {start} [, {count}]])		*matchstrpos()*
 
 		Can also be used as a |method|: >
 			GetText()->matchstrpos('word')
+<
 							*max()*
 max({expr})	Return the maximum value of all items in {expr}.
 		{expr} can be a list or a dictionary.  For a dictionary,
@@ -7045,9 +7105,9 @@ mkdir({name} [, {path} [, {prot}]])
 
 		There is no error if the directory already exists and the "p"
 		flag is passed (since patch 8.0.1708).  However, without the
-		"p" option the call will fail.  
+		"p" option the call will fail.
 
-		The function result is a Number, which is 1 if the call was 
+		The function result is a Number, which is 1 if the call was
 		successful or 0 if the directory creation failed or partly
 		failed.
 
@@ -7062,6 +7122,7 @@ mode([expr])	Return a string that indicates the current mode.
 		If [expr] is supplied and it evaluates to a non-zero Number or
 		a non-empty String (|non-zero-arg|), then the full mode is
 		returned, otherwise only the first letter is returned.
+		Also see |state()|.
 
 		   n	    Normal, Terminal-Normal
 		   no	    Operator-pending
@@ -7487,7 +7548,7 @@ pum_getpos()						*pum_getpos()*
 			row		top screen row (0 first row)
 			col		leftmost screen column (0 first col)
 			size		total nr of items
-			scrollbar	|TRUE| if visible
+			scrollbar	|TRUE| if scrollbar is visible
 
 		The values are the same as in |v:event| during
 		|CompleteChanged|.
@@ -8258,20 +8319,31 @@ serverlist()					*serverlist()*
 			:echo serverlist()
 <
 setbufline({expr}, {lnum}, {text})			*setbufline()*
-		Set line {lnum} to {text} in buffer {expr}.  To insert
-		lines use |append()|.  Any text properties in {lnum} are
-		cleared.
+		Set line {lnum} to {text} in buffer {expr}.  This works like
+		|setline()| for the specified buffer.
+
+		This function works only for loaded buffers. First call
+		|bufload()| if needed.
+
+		To insert lines use |appendbufline()|.
+		Any text properties in {lnum} are cleared.
+
+		{text} can be a string to set one line, or a list of strings
+		to set multiple lines.  If the list extends below the last
+		line then those lines are added.
 
 		For the use of {expr}, see |bufname()| above.
 
 		{lnum} is used like with |setline()|.
-		This works like |setline()| for the specified buffer.
+		When {lnum} is just below the last line the {text} will be
+		added below the last line.
 
 		When {expr} is not a valid buffer, the buffer is not loaded or
 		{lnum} is not valid then 1 is returned.  On success 0 is
 		returned.
 
-		Can also be used as a |method|: >
+		Can also be used as a |method|, the base is passed as the
+		third argument: >
 			GetText()->setbufline(buf, lnum)
 
 setbufvar({expr}, {varname}, {val})			*setbufvar()*
@@ -8287,7 +8359,8 @@ setbufvar({expr}, {varname}, {val})			*setbufvar()*
 			:call setbufvar("todo", "myvar", "foobar")
 <		This function is not available in the |sandbox|.
 
-		Can also be used as a |method|: >
+		Can also be used as a |method|, the base is passed as the
+		third argument: >
 			GetValue()->setbufvar(buf, varname)
 
 setcharsearch({dict})					*setcharsearch()*
@@ -8336,7 +8409,8 @@ setenv({name}, {val})						*setenv()*
 		When {val} is |v:null| the environment variable is deleted.
 		See also |expr-env|.
 
-		Can also be used as a |method|, passing the value as the base: >
+		Can also be used as a |method|, the base is passed as the
+		second argument: >
 			GetPath()->setenv('PATH')
 
 setfperm({fname}, {mode})				*setfperm()* *chmod*
@@ -8367,7 +8441,7 @@ setline({lnum}, {text})					*setline()*
 
 		{lnum} is used like with |getline()|.
 		When {lnum} is just below the last line the {text} will be
-		added as a new line.
+		added below the last line.
 
 		If this succeeds, 0 is returned.  If this fails (most likely
 		because {lnum} is invalid) 1 is returned.
@@ -8385,7 +8459,8 @@ setline({lnum}, {text})					*setline()*
 
 <		Note: The '[ and '] marks are not set.
 
-		Can also be used as a |method|, passing the text as the base: >
+		Can also be used as a |method|, the base is passed as the
+		second argument: >
 			GetText()->setline(lnum)
 
 setloclist({nr}, {list} [, {action} [, {what}]])		*setloclist()*
@@ -8634,7 +8709,8 @@ settabvar({tabnr}, {varname}, {val})			*settabvar()*
 		Tabs are numbered starting with one.
 		This function is not available in the |sandbox|.
 
-		Can also be used as a |method|, the base is used as the value: >
+		Can also be used as a |method|, the base is passed as the
+		third argument: >
 			GetValue()->settabvar(tab, name)
 
 settabwinvar({tabnr}, {winnr}, {varname}, {val})	*settabwinvar()*
@@ -8655,7 +8731,8 @@ settabwinvar({tabnr}, {winnr}, {varname}, {val})	*settabwinvar()*
 			:call settabwinvar(3, 2, "myvar", "foobar")
 <		This function is not available in the |sandbox|.
 
-		Can also be used as a |method|, the base is used as the value: >
+		Can also be used as a |method|, the base is passed as the
+		fourth argument: >
 			GetValue()->settabvar(tab, winnr, name)
 
 settagstack({nr}, {dict} [, {action}])			*settagstack()*
@@ -8689,7 +8766,8 @@ settagstack({nr}, {dict} [, {action}])			*settagstack()*
 			call settagstack(1003, stack)
 			unlet stack
 <
-		Can also be used as a |method|, the base is used as the Dict: >
+		Can also be used as a |method|, the base is passed as the
+		second argument: >
 			GetStack()->settagstack(winnr)
 
 setwinvar({winnr}, {varname}, {val})			*setwinvar()*
@@ -8698,7 +8776,8 @@ setwinvar({winnr}, {varname}, {val})			*setwinvar()*
 			:call setwinvar(1, "&list", 0)
 			:call setwinvar(2, "myvar", "foobar")
 
-<		Can also be used as a |method|, the base is used as the value: >
+<		Can also be used as a |method|, the base is passed as the
+		third argument: >
 			GetValue()->setwinvar(winnr, name)
 
 sha256({string})						*sha256()*
@@ -9037,6 +9116,42 @@ sqrt({expr})						*sqrt()*
 		{only available when compiled with the |+float| feature}
 
 
+state([{what}])						*state()*
+		Return a string which contains characters indicating the
+		current state.  Mostly useful in callbacks that want to do
+		work that may not always be safe.  Roughly this works like:
+		- callback uses state() to check if work is safe to do.
+		  Yes: then do it right away.
+		  No:  add to work queue and add a |SafeState| and/or
+		       |SafeStateAgain| autocommand (|SafeState| triggers at
+		       toplevel, |SafeStateAgain| triggers after handling
+		       messages and callbacks).
+		- When SafeState or SafeStateAgain is triggered and executes
+		  your autocommand, check with `state()` if the work can be
+		  done now, and if yes remove it from the queue and execute.
+		  Remove the autocommand if the queue is now empty.
+		Also see |mode()|.
+
+		When {what} is given only characters in this string will be
+		added.  E.g, this checks if the screen has scrolled: >
+			if state('s') == ''
+			   " screen has not scrolled
+<
+		These characters indicate the state, generally indicating that
+		something is busy:
+		    m	halfway a mapping, :normal command, feedkeys() or
+			stuffed command
+		    o	operator pending or waiting for a command argument,
+		        e.g. after |f|
+		    a	Insert mode autocomplete active
+		    x	executing an autocommand
+		    w	blocked on waiting, e.g. ch_evalexpr(), ch_read() and
+			ch_readraw() when reading json.
+		    S	not triggering SafeState or SafeStateAgain
+		    c	callback invoked, including timer (repeats for
+			recursiveness up to "ccc")
+		    s	screen has scrolled for messages
+
 str2float({expr})					*str2float()*
 		Convert String {expr} to a Float.  This mostly works the same
 		as when using a floating point number in an expression, see
@@ -9073,14 +9188,16 @@ str2list({expr} [, {utf8}])				*str2list()*
 			GetString()->str2list()
 
 
-str2nr({expr} [, {base}])				*str2nr()*
+str2nr({expr} [, {base} [, {quoted}]])				*str2nr()*
 		Convert string {expr} to a number.
 		{base} is the conversion base, it can be 2, 8, 10 or 16.
+		When {quoted} is present and non-zero then embedded single
+		quotes are ignored, thus "1'000'000" is a million.
 
 		When {base} is omitted base 10 is used.  This also means that
 		a leading zero doesn't cause octal conversion to be used, as
 		with the default String to Number conversion.  Example: >
-			let nr = str2nr('123')
+			let nr = str2nr('0123')
 <
 		When {base} is 16 a leading "0x" or "0X" is ignored.  With a
 		different base the result will be zero.  Similarly, when
@@ -9152,7 +9269,7 @@ strftime({format} [, {time}])				*strftime()*
 		{format} depends on your system, thus this is not portable!
 		See the manual page of the C function strftime() for the
 		format.  The maximum length of the result is 80 characters.
-		See also |localtime()| and |getftime()|.
+		See also |localtime()|, |getftime()| and |strptime()|.
 		The language can be changed with the |:language| command.
 		Examples: >
 		  :echo strftime("%c")		   Sun Apr 27 11:49:23 1997
@@ -9197,6 +9314,7 @@ stridx({haystack}, {needle} [, {start}])		*stridx()*
 
 		Can also be used as a |method|: >
 			GetHaystack()->stridx(needle)
+<
 							*string()*
 string({expr})	Return {expr} converted to a String.  If {expr} is a Number,
 		Float, String, Blob or a composition of them, then the result
@@ -9252,6 +9370,34 @@ strpart({src}, {start} [, {len}])			*strpart()*
 		Can also be used as a |method|: >
 			GetText()->strpart(5)
 
+strptime({format}, {timestring})				*strptime()*
+		The result is a Number, which is a unix timestamp representing
+		the date and time in {timestring}, which is expected to match
+		the format specified in {format}.
+
+		The accepted {format} depends on your system, thus this is not
+		portable!  See the manual page of the C function strptime()
+		for the format.  Especially avoid "%c".  The value of $TZ also
+		matters.
+
+		If the {timestring} cannot be parsed with {format} zero is
+		returned.  If you do not know the format of {timestring} you
+		can try different {format} values until you get a non-zero
+		result.
+
+		See also |strftime()|.
+		Examples: >
+		  :echo strptime("%Y %b %d %X", "1997 Apr 27 11:49:23")
+<		  862156163 >
+		  :echo strftime("%c", strptime("%y%m%d %T", "970427 11:53:55"))
+<		  Sun Apr 27 11:53:55 1997 >
+		  :echo strftime("%c", strptime("%Y%m%d%H%M%S", "19970427115355") + 3600)
+<		  Sun Apr 27 12:53:55 1997
+
+		Not available on all systems.  To check use: >
+			:if exists("*strptime")
+
+
 strridx({haystack}, {needle} [, {start}])			*strridx()*
 		The result is a Number, which gives the byte index in
 		{haystack} of the last occurrence of the String {needle}.
@@ -9584,9 +9730,14 @@ systemlist({expr} [, {input}])				*systemlist()*
 		Same as |system()|, but returns a |List| with lines (parts of
 		output separated by NL) with NULs transformed into NLs. Output
 		is the same as |readfile()| will output with {binary} argument
-		set to "b".  Note that on MS-Windows you may get trailing CR
-		characters.
+		set to "b", except that there is no extra empty item when the
+		result ends in a NL.
+		Note that on MS-Windows you may get trailing CR characters.
 
+		To see the difference between "echo hello" and "echo -n hello"
+		use |system()| and |split()|: >
+			echo system('echo hello')->split('\n', 1)
+<
 		Returns an empty string on error.
 
 		Can also be used as a |method|: >
@@ -9606,6 +9757,8 @@ tabpagebuflist([{arg}])					*tabpagebuflist()*
 			endfor
 <		Note that a buffer may appear in more than one window.
 
+		Can also be used as a |method|: >
+			GetTabpage()->tabpagebuflist()
 
 tabpagenr([{arg}])					*tabpagenr()*
 		The result is a Number, which is the number of the current
@@ -9628,6 +9781,9 @@ tabpagewinnr({tabarg} [, {arg}])			*tabpagewinnr()*
 		    tabpagewinnr(4, '$')    " number of windows in tab page 4
 <		When {tabarg} is invalid zero is returned.
 
+		Can also be used as a |method|: >
+			GetTabpage()->tabpagewinnr()
+<
 							*tagfiles()*
 tagfiles()	Returns a |List| with the file names used to search for tags
 		for the current buffer.  This is the 'tags' option expanded.
@@ -9676,6 +9832,9 @@ taglist({expr} [, {filename}])				*taglist()*
 		located by Vim. Refer to |tags-file-format| for the format of
 		the tags file generated by the different ctags tools.
 
+		Can also be used as a |method|: >
+			GetTagpattern()->taglist()
+
 tan({expr})						*tan()*
 		Return the tangent of {expr}, measured in radians, as a |Float|
 		in the range [-inf, inf].
@@ -9742,7 +9901,10 @@ timer_info([{id}])
 		    "callback"	    the callback
 		    "paused"	    1 if the timer is paused, 0 otherwise
 
-		{only available when compiled with the |+timers| feature}
+		Can also be used as a |method|: >
+			GetTimer()->timer_info()
+
+<		{only available when compiled with the |+timers| feature}
 
 timer_pause({timer}, {paused})				*timer_pause()*
 		Pause or unpause a timer.  A paused timer does not invoke its
@@ -9757,7 +9919,10 @@ timer_pause({timer}, {paused})				*timer_pause()*
 		String, then the timer is paused, otherwise it is unpaused.
 		See |non-zero-arg|.
 
-		{only available when compiled with the |+timers| feature}
+		Can also be used as a |method|: >
+			GetTimer()->timer_pause(1)
+
+<		{only available when compiled with the |+timers| feature}
 
 						*timer_start()* *timer* *timers*
 timer_start({time}, {callback} [, {options}])
@@ -9790,7 +9955,10 @@ timer_start({time}, {callback} [, {options}])
 <		This will invoke MyHandler() three times at 500 msec
 		intervals.
 
-		Not available in the |sandbox|.
+		Can also be used as a |method|: >
+			GetMsec()->timer_start(callback)
+
+<		Not available in the |sandbox|.
 		{only available when compiled with the |+timers| feature}
 
 timer_stop({timer})					*timer_stop()*
@@ -9798,7 +9966,10 @@ timer_stop({timer})					*timer_stop()*
 		{timer} is an ID returned by timer_start(), thus it must be a
 		Number.  If {timer} does not exist there is no error.
 
-		{only available when compiled with the |+timers| feature}
+		Can also be used as a |method|: >
+			GetTimer()->timer_stop()
+
+<		{only available when compiled with the |+timers| feature}
 
 timer_stopall()						*timer_stopall()*
 		Stop all timers.  The timer callbacks will no longer be
@@ -9812,11 +9983,17 @@ tolower({expr})						*tolower()*
 		characters turned into lowercase (just like applying |gu| to
 		the string).
 
+		Can also be used as a |method|: >
+			GetText()->tolower()
+
 toupper({expr})						*toupper()*
 		The result is a copy of the String given, with all lowercase
 		characters turned into uppercase (just like applying |gU| to
 		the string).
 
+		Can also be used as a |method|: >
+			GetText()->toupper()
+
 tr({src}, {fromstr}, {tostr})				*tr()*
 		The result is a copy of the {src} string with all characters
 		which appear in {fromstr} replaced by the character in that
@@ -9831,6 +10008,9 @@ tr({src}, {fromstr}, {tostr})				*tr()*
 			echo tr("<blob>", "<>", "{}")
 <		returns "{blob}"
 
+		Can also be used as a |method|: >
+			GetText()->tr(from, to)
+
 trim({text} [, {mask}])						*trim()*
 		Return {text} as a String where any character in {mask} is
 		removed from the beginning and  end of {text}.
@@ -9847,6 +10027,9 @@ trim({text} [, {mask}])						*trim()*
 			echo trim("rm<Xrm<>X>rrm", "rm<>")
 <		returns "Xrm<>X" (characters in the middle are not removed)
 
+		Can also be used as a |method|: >
+			GetText()->trim()
+
 trunc({expr})							*trunc()*
 		Return the largest integral value with magnitude less than or
 		equal to {expr} as a |Float| (truncate towards zero).
@@ -9907,6 +10090,9 @@ undofile({name})					*undofile()*
 		When compiled without the |+persistent_undo| option this always
 		returns an empty string.
 
+		Can also be used as a |method|: >
+			GetFilename()->undofile()
+
 undotree()						*undotree()*
 		Return the current state of the undo tree in a dictionary with
 		the following items:
@@ -10005,8 +10191,11 @@ virtcol({expr})						*virtcol()*
 		all lines: >
 		    echo max(map(range(1, line('$')), "virtcol([v:val, '$'])"))
 
+<		Can also be used as a |method|: >
+			GetPos()->virtcol()
 
-visualmode([expr])						*visualmode()*
+
+visualmode([{expr}])						*visualmode()*
 		The result is a String, which describes the last Visual mode
 		used in the current buffer.  Initially it returns an empty
 		string, but once Visual mode has been used, it returns "v",
@@ -10020,7 +10209,7 @@ visualmode([expr])						*visualmode()*
 		Visual mode that was used.
 		If Visual mode is active, use |mode()| to get the Visual mode
 		(e.g., in a |:vmap|).
-		If [expr] is supplied and it evaluates to a non-zero Number or
+		If {expr} is supplied and it evaluates to a non-zero Number or
 		a non-empty String, then the Visual mode will be cleared and
 		the old value is returned.  See |non-zero-arg|.
 
@@ -10049,10 +10238,17 @@ win_execute({id}, {command} [, {silent}])		*win_execute()*
 		Not all commands are allowed in popup windows.
 		When window {id} does not exist then no error is given.
 
+		Can also be used as a |method|, the base is passed as the
+		second argument: >
+			GetCommand()->win_execute(winid)
+
 win_findbuf({bufnr})					*win_findbuf()*
 		Returns a list with |window-ID|s for windows that contain
 		buffer {bufnr}.  When there is none the list is empty.
 
+		Can also be used as a |method|: >
+			GetBufnr()->win_findbuf()
+
 win_getid([{win} [, {tab}]])				*win_getid()*
 		Get the |window-ID| for the specified window.
 		When {win} is missing use the current window.
@@ -10062,20 +10258,32 @@ win_getid([{win} [, {tab}]])				*win_getid()*
 		number {tab}.  The first tab has number one.
 		Return zero if the window cannot be found.
 
+		Can also be used as a |method|: >
+			GetWinnr()->win_getid()
+
 win_gotoid({expr})					*win_gotoid()*
 		Go to window with ID {expr}.  This may also change the current
 		tabpage.
 		Return 1 if successful, 0 if the window cannot be found.
 
+		Can also be used as a |method|: >
+			GetWinid()->win_gotoid()
+
 win_id2tabwin({expr})					*win_id2tabwin()*
 		Return a list with the tab number and window number of window
 		with ID {expr}: [tabnr, winnr].
 		Return [0, 0] if the window cannot be found.
 
+		Can also be used as a |method|: >
+			GetWinid()->win_id2tabwin()
+
 win_id2win({expr})					*win_id2win()*
 		Return the window number of window with ID {expr}.
 		Return 0 if the window cannot be found in the current tabpage.
 
+		Can also be used as a |method|: >
+			GetWinid()->win_id2win()
+
 win_screenpos({nr})					*win_screenpos()*
 		Return the screen position of window {nr} as a list with two
 		numbers: [row, col].  The first window always has position
@@ -10084,6 +10292,31 @@ win_screenpos({nr})					*win_screenpos()*
 		Return [0, 0] if the window cannot be found in the current
 		tabpage.
 
+		Can also be used as a |method|: >
+			GetWinid()->win_screenpos()
+<
+win_splitmove({nr}, {target} [, {options}])		*win_splitmove()*
+	        Move the window {nr} to a new split of the window {target}.
+		This is similar to moving to {target}, creating a new window
+		using |:split| but having the same contents as window {nr}, and
+		then closing {nr}.
+
+		Both {nr} and {target} can be window numbers or |window-ID|s.
+
+		Returns zero for success, non-zero for failure.
+
+		{options} is a Dictionary with the following optional entries:
+		  "vertical"	When TRUE, the split is created vertically,
+				like with |:vsplit|.
+		  "rightbelow"	When TRUE, the split is made below or to the
+				right (if vertical).  When FALSE, it is done
+				above or to the left (if vertical).  When not
+				present, the values of 'splitbelow' and
+				'splitright' are used.
+
+		Can also be used as a |method|: >
+			GetWinid()->win_splitmove(target)
+<
 							*winbufnr()*
 winbufnr({nr})	The result is a Number, which is the number of the buffer
 		associated with window {nr}.  {nr} can be the window number or
@@ -10111,6 +10344,9 @@ winheight({nr})						*winheight()*
 		This excludes any window toolbar line.
 		Examples: >
   :echo "The current window has " . winheight(0) . " lines."
+
+<		Can also be used as a |method|: >
+			GetWinid()->winheight()
 <
 winlayout([{tabnr}])					*winlayout()*
 		The result is a nested List containing the layout of windows
@@ -10140,6 +10376,9 @@ winlayout([{tabnr}])					*winlayout()*
 			:echo winlayout(2)
 			['col', [['leaf', 1002], ['row', ['leaf', 1003],
 					     ['leaf', 1001]]], ['leaf', 1000]]
+<
+		Can also be used as a |method|: >
+			GetTabnr()->winlayout()
 <
 							*winline()*
 winline()	The result is a Number, which is the screen line of the cursor
@@ -10174,6 +10413,9 @@ winnr([{arg}])	The result is a Number, which is the number of the current
 			let window_count = winnr('$')
 			let prev_window = winnr('#')
 			let wnum = winnr('3k')
+
+<		Can also be used as a |method|: >
+			GetWinval()->winnr()
 <
 							*winrestcmd()*
 winrestcmd()	Returns a sequence of |:resize| commands that should restore
@@ -10202,6 +10444,9 @@ winrestview({dict})
 		If you have changed the values the result is unpredictable.
 		If the window size changed the result won't be the same.
 
+		Can also be used as a |method|: >
+			GetView()->winrestview()
+<
 							*winsaveview()*
 winsaveview()	Returns a |Dictionary| that contains information to restore
 		the view of the current window.  Use |winrestview()| to
@@ -10239,6 +10484,9 @@ winwidth({nr})						*winwidth()*
 <		For getting the terminal or screen size, see the 'columns'
 		option.
 
+		Can also be used as a |method|: >
+			GetWinid()->winwidth()
+
 
 wordcount()						*wordcount()*
 		The result is a dictionary of byte/chars/word statistics for
@@ -10300,17 +10548,20 @@ writefile({object}, {fname} [, {flags}])
 			:let fl = readfile("foo", "b")
 			:call writefile(fl, "foocopy", "b")
 
+<		Can also be used as a |method|: >
+			GetText()->writefile("thefile")
+
 
 xor({expr}, {expr})					*xor()*
 		Bitwise XOR on the two arguments.  The arguments are converted
 		to a number.  A List, Dict or Float argument causes an error.
 		Example: >
 			:let bits = xor(bits, 0x80)
-<		Can also be used as a |method|: >
+<
+		Can also be used as a |method|: >
 			:let bits = bits->xor(0x80)
 <
 
-
 							*feature-list*
 There are four types of features:
 1.  Features that are only supported when they have been enabled when Vim
@@ -11183,21 +11434,22 @@ This does NOT work: >
 
 						*:let=<<* *:let-heredoc*
 						*E990* *E991* *E172* *E221*
-:let {var-name} =<< [trim] {marker}
+:let {var-name} =<< [trim] {endmarker}
 text...
 text...
-{marker}
+{endmarker}
 			Set internal variable {var-name} to a List containing
-			the lines of text bounded by the string {marker}.
-			{marker} must not contain white space.
-			{marker} cannot start with a lower case character.
-			The last line should end only with the {marker} string
-			without any other character.  Watch out for white
-			space after {marker}!
+			the lines of text bounded by the string {endmarker}.
+			{endmarker} must not contain white space.
+			{endmarker} cannot start with a lower case character.
+			The last line should end only with the {endmarker}
+			string without any other character.  Watch out for
+			white space after {endmarker}!
 
 			Without "trim" any white space characters in the lines
 			of text are preserved.  If "trim" is specified before
-			{marker}, then indentation is stripped so you can do: >
+			{endmarker}, then indentation is stripped so you can
+			do: >
 				let text =<< trim END
 				   if ok
 				     echo 'done'
@@ -11211,23 +11463,31 @@ text...
 			non-empty text line is stripped from the input lines.
 			All leading indentation exactly matching the leading
 			indentation before `let` is stripped from the line
-			containing {marker}.  Note that the difference between
-			space and tab matters here.
+			containing {endmarker}.  Note that the difference
+			between space and tab matters here.
 
 			If {var-name} didn't exist yet, it is created.
 			Cannot be followed by another command, but can be
 			followed by a comment.
 
+			To avoid line continuation to be applied, consider
+			adding 'C' to 'cpoptions': >
+				set cpo+=C
+				let var =<< END
+				   \ leading backslash
+				END
+				set cpo-=C
+<
 			Examples: >
 				let var1 =<< END
-			Sample text 1
-			    Sample text 2
-			Sample text 3
-			END
+				Sample text 1
+				    Sample text 2
+				Sample text 3
+				END
 
 				let data =<< trim DATA
-				1 2 3 4
-				5 6 7 8
+					1 2 3 4
+					5 6 7 8
 				DATA
 <
 								*E121*
@@ -11355,21 +11615,6 @@ text...
 			Unlock the internal variable {name}.  Does the
 			opposite of |:lockvar|.
 
-							*:eval*
-:eval {expr}		Evaluate {expr} and discard the result.  Example: >
-				:eval Getlist()->Filter()->append('$')
-
-<			The expression is supposed to have a side effect,
-			since the resulting value is not used.  In the example
-			the `append()` call appends the List with text to the
-			buffer.  This is similar to `:call` but works with any
-			expression.
-
-			The command can be shortened to `:ev` or `:eva`, but
-			these are hard to recognize and therefore not to be
-			used.
-
-
 :if {expr1}			*:if* *:end* *:endif* *:en* *E171* *E579* *E580*
 :en[dif]		Execute the commands until the next matching ":else"
 			or ":endif" if {expr1} evaluates to non-zero.
@@ -11656,6 +11901,21 @@ text...
 			And to get a beep: >
 		:exe "normal \<Esc>"
 <
+							*:eval*
+:eval {expr}		Evaluate {expr} and discard the result.  Example: >
+				:eval Getlist()->Filter()->append('$')
+
+<			The expression is supposed to have a side effect,
+			since the resulting value is not used.  In the example
+			the `append()` call appends the List with text to the
+			buffer.  This is similar to `:call` but works with any
+			expression.
+
+			The command can be shortened to `:ev` or `:eva`, but
+			these are hard to recognize and therefore not to be
+			used.
+
+
 							*:exe* *:execute*
 :exe[cute] {expr1} ..	Executes the string that results from the evaluation
 			of {expr1} as an Ex command.
@@ -12835,6 +13095,23 @@ instead of failing in mysterious ways.
 
 	Test for support with: >
 		has('vimscript-3')
+<
+							*scriptversion-4*  >
+ :scriptversion 4
+<	Numbers with a leading zero are not recognized as octal.  With the
+	previous version you get: >
+		echo 017   " displays 15
+		echo 018   " displays 18
+<	with script version 4: >
+		echo 017   " displays 17
+		echo 018   " displays 18
+<	Also, it is possible to use single quotes inside numbers to make them
+	easier to read: >
+		echo 1'000'000
+<	The quotes must be surrounded by digits.
+
+	Test for support with: >
+		has('vimscript-4')
 
 ==============================================================================
 11. No +eval feature				*no-eval-feature*

runtime/doc/filetype.txt

@@ -595,6 +595,10 @@ If you do not like the default folding, use an autocommand to add your desired
 folding style instead.  For example: >
         autocmd FileType man setlocal foldmethod=indent foldenable
 
+If you would like :Man {number} {name} to behave like man {number} {name} by
+not running man {name} if no page is found, then use this: >
+	let g:ft_man_no_sect_fallback = 1
+
 You may also want to set 'keywordprg' to make the |K| command open a manual
 page in a Vim window: >
 	set keywordprg=:Man

runtime/doc/gui.txt

@@ -1,4 +1,4 @@
-*gui.txt*       For Vim version 8.1.  Last change: 2019 Aug 21
+*gui.txt*       For Vim version 8.1.  Last change: 2019 Nov 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -309,7 +309,7 @@ because the menu command will always be applied to the top window.
 
 If you are on the ':' line (or '/' or '?'), then clicking the left or right
 mouse button will position the cursor on the ':' line (if 'mouse' contains
-'c', 'a' or 'A').
+'c' or 'a').
 
 In any situation the middle mouse button may be clicked to paste the current
 selection.
@@ -560,8 +560,9 @@ floating menus that do not appear on the main menu bar.
 				*E330* *E327* *E331* *E336* *E333*
 				*E328* *E329* *E337* *E792*
 To create a new menu item, use the ":menu" commands.  They are mostly like
-the ":map" set of commands but the first argument is a menu item name, given
-as a path of menus and submenus with a '.' between them, e.g.: >
+the ":map" set of commands (see |map-modes|), but the first argument is a menu
+item name, given as a path of menus and submenus with a '.' between them,
+e.g.: >
 
    :menu File.Save  :w<CR>
    :inoremenu File.Save  <C-O>:w<CR>

runtime/doc/gui_w32.txt

@@ -171,14 +171,14 @@ you can.
 		path			    {path}\gvim.exe
    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\vim 5.6
 		DisplayName		    Vim 5.6: Edit with Vim popup menu entry
-		UninstallString		    {path}\uninstal.exe
+		UninstallString		    {path}\uninstall.exe
 
    Replace {path} with the path that leads to the executable.
    Don't type {default}, this is the value for the key itself.
 
 To remove "Edit with Vim" from the popup menu, just remove the registry
-entries mentioned above.  The "uninstal.exe" program can do this for you.  You
-can also use the entry in the Windows standard "Add/Remove Programs" list.
+entries mentioned above.  The "uninstall.exe" program can do this for you.
+You can also use the entry in the Windows standard "Add/Remove Programs" list.
 
 If you notice that this entry overrules other file type associations, set
 those associations again by hand (using Windows Explorer, see above).  This

runtime/doc/hangulin.txt

@@ -1,112 +1,17 @@
-*hangulin.txt*  For Vim version 8.1.  Last change: 2015 Nov 24
+*hangulin.txt*  For Vim version 8.1.  Last change: 2019 Nov 21
 
 
 		  VIM REFERENCE MANUAL    by Chi-Deok Hwang and Sung-Hyun Nam
 
+						*hangul*
+Vim had built-in support for hangul, the Korean language, for users without
+XIM (X Input Method).  Since it didn't work well and was not maintained it was
+removed in Vim 8.1.2327.
 
-Introduction					*hangul*
-------------
-It is to input hangul, the Korean language, with Vim GUI version.
-If you have a XIM program, you can use another |+xim| feature.
-Basically, it is for anybody who has no XIM program.
+If you want this hangul input mehod you can go back to Vim 8.1.2326 or
+earlier.  If you think this code is still useful and want to maintain it, make
+a patch to add it back.  However, making it work with UTF-8 encoding would be
+best.
 
-Compile
--------
-Next is a basic option.  You can add any other configure option. >
-
-   ./configure --with-x --enable-multibyte --enable-hangulinput \
-            --disable-xim
-
-And you should check feature.h.  If |+hangul_input| feature is enabled
-by configure, you can select more options such as keyboard type, 2 bulsik
-or 3 bulsik.  You can find keywords like next in there. >
-
-	#define HANGUL_DEFAULT_KEYBOARD 2
-	#define ESC_CHG_TO_ENG_MODE
-	/* #define X_LOCALE */
-
-Environment variables
----------------------
-You should set LANG variable to Korean locale such as ko, ko_KR.eucKR
-or ko_KR.UTF-8.
-If you set LC_ALL variable, it should be set to Korean locale also.
-
-Vim resource
-------------
-You may want to set 'encoding' and 'fileencodings'.
-Next are examples: >
-
-	:set encoding=euc-kr
-	:set encoding=utf-8
-	:set fileencodings=ucs-bom,utf-8,cp949,euc-kr,latin1
-
-Keyboard
---------
-You can change keyboard type (2 bulsik or 3 bulsik) using VIM_KEYBOARD
-or HANGUL_KEYBOARD_TYPE environment variables.  For sh, just do (2 bulsik): >
-
-    export VIM_KEYBOARD="2"
-or >
-    export HANGUL_KEYBOARD_TYPE="2"
-
-If both are set, VIM_KEYBOARD has higher priority.
-
-Hangul Fonts
-------------
-If you use GTK version of gvim, you should set 'guifont' and 'guifontwide'.
-For example: >
-    set guifont=Courier\ 12
-    set guifontwide=NanumGothicCoding\ 12
-
-If you use Motif or Athena version of gvim, you should set 'guifontset' in
-your vimrc.  You can set fontset in the .Xdefaults file.
-
-$HOME/.gvimrc: >
-    set guifontset=english_font,hangul_font
-
-$HOME/.Xdefaults: >
-    Vim.font: english_font
-
-    ! Nexts are for hangul menu with Athena
-    *international: True
-    Vim*fontSet: english_font,hangul_font
-
-    ! Nexts are for hangul menu with Motif
-    *international: True
-    Vim*fontList: english_font;hangul_font:
-
-attention! the , (comma) or ; (semicolon)
-
-And there should be no ':set guifont'.  If it exists, then gvim ignores
-':set guifontset'.  It means Vim runs without fontset supporting.
-So, you can see only English.  Hangul does not be correctly displayed.
-
-After "fontset" feature is enabled, Vim does not allow using english
-font only in "font" setting for syntax.
-For example, if you use >
-   :set guifontset=eng_font,your_font
-in your .gvimrc, then you should do for syntax >
-   :hi Comment guifg=Cyan font=another_eng_font,another_your_font
-If you just do >
-   :hi Comment font=another_eng_font
-then you can see a error message.  Be careful!
-
-hangul_font width should be twice than english_font width.
-
-Unsupported Feature
--------------------
-We don't support Johab font.
-We don't support Hanja input.
-And We don't have any plan to support them.
-
-If you really need such features, you can use console version of Vim with a
-capable terminal emulator.
-
-Bug or Comment
---------------
-Send comments, patches and suggestions to:
-
-				    SungHyun Nam <goweol@gmail.com>
-				    Chi-Deok Hwang <...>
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 8.1.  Last change: 2019 May 04
+*helphelp.txt*	For Vim version 8.1.  Last change: 2019 Oct 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -102,7 +102,11 @@ Help on help files					*helphelp*
 			current file.  See |help-translated|.
 
 						 	*:helpc* *:helpclose*
-:helpc[lose]            Close one help window, if there is one.
+:helpc[lose]		Close one help window, if there is one.
+			Vim will try to restore the window layout (including
+			cursor position) to the same layout it was before
+			opening the help window initially.  This might cause
+			triggering several autocommands.
 
 							*:helpg* *:helpgrep*
 :helpg[rep] {pattern}[@xx]

runtime/doc/if_perl.txt

@@ -55,14 +55,14 @@ The ActiveState one should work, Strawberry Perl is a good alternative.
 			working: >
 				:perl VIM::Msg("Hello")
 
-:pe[rl] << [endpattern]
+:pe[rl] << [endmarker]
 {script}
-{endpattern}
+{endmarker}
 			Execute Perl script {script}.
-			The {endpattern} after {script} must NOT be preceded
-			by any white space.
+			The {endmarker} after {script} must NOT be preceded by
+			any white space.
 
-			If [endpattern] is omitted, it defaults to a dot '.'
+			If [endmarker] is omitted, it defaults to a dot '.'
 			like for the |:append| and |:insert| commands.  Using
 			'.' helps when inside a function, because "$i;" looks
 			like the start of an |:insert| command to Vim.

runtime/doc/if_ruby.txt

@@ -28,14 +28,14 @@ downloading Ruby there.
 :rub[y] {cmd}		Execute Ruby command {cmd}.  A command to try it out: >
 				:ruby print "Hello"
 
-:rub[y] << [endpattern]
+:rub[y] << [endmarker]
 {script}
-{endpattern}
+{endmarker}
 			Execute Ruby script {script}.
-			The {endpattern} after {script} must NOT be preceded
-			by any white space.
+			The {endmarker} after {script} must NOT be preceded by
+			any white space.
 
-			If [endpattern] is omitted, it defaults to a dot '.'
+			If [endmarker] is omitted, it defaults to a dot '.'
 			like for the |:append| and |:insert| commands.
 
 			This form of the |:ruby| command is mainly useful for

runtime/doc/indent.txt

@@ -949,10 +949,12 @@ Function call arguments will indent 1 extra level. For two-space indentation: >
 -------------
 
 				*PHP_IndentFunctionDeclarationParameters*
-Extra indentation levels to add to arguments in multi-line function definitions. >
+Extra indentation levels to add to arguments in multi-line function
+definitions. >
     let g:PHP_IndentFunctionDeclarationParameters = 1
 
-Function arguments in declarations will indent 1 extra level. For two-space indentation: >
+Function arguments in declarations will indent 1 extra level. For two-space
+indentation: >
 
     function call_the_thing(
         $with_this,

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 8.1.  Last change: 2019 Sep 02
+*index.txt*     For Vim version 8.1.  Last change: 2019 Sep 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -73,14 +73,14 @@ tag		char		action in Insert mode	~
 				the cursor
 |i_CTRL-Q|	CTRL-Q		same as CTRL-V, unless used for terminal
 				control flow
-|i_CTRL-R|	CTRL-R {0-9a-z"%#*:=}
+|i_CTRL-R|	CTRL-R {register}
 				insert the contents of a register
-|i_CTRL-R_CTRL-R| CTRL-R CTRL-R {0-9a-z"%#*:=}
+|i_CTRL-R_CTRL-R| CTRL-R CTRL-R {register}
 				insert the contents of a register literally
-|i_CTRL-R_CTRL-O| CTRL-R CTRL-O {0-9a-z"%#*:=}
+|i_CTRL-R_CTRL-O| CTRL-R CTRL-O {register}
 				insert the contents of a register literally
 				and don't auto-indent
-|i_CTRL-R_CTRL-P| CTRL-R CTRL-P {0-9a-z"%#*:=}
+|i_CTRL-R_CTRL-P| CTRL-R CTRL-P {register}
 				insert the contents of a register literally
 				and fix indent.
 		CTRL-S		(used for terminal control flow)
@@ -781,6 +781,7 @@ tag		char	      note action in Normal mode	~
 |gn|		gn	      1,2  find the next match with the last used
 				   search pattern and Visually select it
 |gm|		gm		1  go to character at middle of the screenline
+|gM|		gM		1  go to character at middle of the text line
 |go|		go		1  cursor to byte N in the buffer
 |gp|		["x]gp		2  put the text [from register x] after the
 				   cursor N times, leave the cursor after it

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.1.  Last change: 2019 Aug 21
+*insert.txt*    For Vim version 8.1.  Last change: 2019 Oct 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -106,7 +106,7 @@ CTRL-K {char1} [char2]
 CTRL-N		Find next keyword (see |i_CTRL-N|).
 CTRL-P		Find previous keyword (see |i_CTRL-P|).
 
-CTRL-R {0-9a-z"%#*+:.-=}					*i_CTRL-R*
+CTRL-R {register}				*i_CTRL-R*
 		Insert the contents of a register.  Between typing CTRL-R and
 		the second character, '"' will be displayed to indicate that
 		you are expected to enter the name of a register.
@@ -143,7 +143,7 @@ CTRL-R {0-9a-z"%#*+:.-=}					*i_CTRL-R*
 				sequence will be broken.
 		See |registers| about registers.
 
-CTRL-R CTRL-R {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-R*
+CTRL-R CTRL-R {register}			*i_CTRL-R_CTRL-R*
 		Insert the contents of a register.  Works like using a single
 		CTRL-R, but the text is inserted literally, not as if typed.
 		This differs when the register contains characters like <BS>.
@@ -155,7 +155,7 @@ CTRL-R CTRL-R {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-R*
 		The '.' register (last inserted text) is still inserted as
 		typed.
 
-CTRL-R CTRL-O {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-O*
+CTRL-R CTRL-O {register}			*i_CTRL-R_CTRL-O*
 		Insert the contents of a register literally and don't
 		auto-indent.  Does the same as pasting with the mouse
 		|<MiddleMouse>|. When the register is linewise this will
@@ -164,7 +164,7 @@ CTRL-R CTRL-O {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-O*
 		The '.' register (last inserted text) is still inserted as
 		typed.
 
-CTRL-R CTRL-P {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-P*
+CTRL-R CTRL-P {register}			*i_CTRL-R_CTRL-P*
 		Insert the contents of a register literally and fix the
 		indent, like |[<MiddleMouse>|.
 		Does not replace characters!
@@ -1124,7 +1124,7 @@ is used when the info popup is created.  The option is a comma separated list
 of values:
 	height		maximum height of the popup
 	width		maximum width of the popup
-	highlight	highlight group of the popup (default is Pmenu)
+	highlight	highlight group of the popup (default is PmenuSel)
 	align		"item" (default) or "menu"
 	border		"on" (default) or "off"
 Example: >
@@ -1138,6 +1138,27 @@ below the text, and the bottom of the menu otherwise.
 After the info popup is created it can be found with |popup_findinfo()| and
 properties can be changed with |popup_setoptions()|.
 
+						*complete-popuphidden*
+If the information for the popup is obtained asynchronously, use "popuphidden"
+in 'completeopt'.  The info popup will then be initally hidden and
+|popup_show()| must be called once it has been filled with the info.  This can
+be done with a |CompleteChanged| autocommand, something like this: >
+	set completeopt+=popuphidden
+	au CompleteChanged * call UpdateCompleteInfo()
+	func UpdateCompleteInfo()
+	  " Cancel any pending info fetch
+	  let item = v:event.completed_item
+	  " Start fetching info for the item then call ShowCompleteInfo(info)
+	endfunc
+	func ShowCompleteInfo(info)
+	  let id = popup_findinfo()
+	  if id
+	    call popup_settext(id, 'async info: ' .. a:info)
+	    call popup_show(id)
+	  endif
+	endfunc
+
+<						*complete-item-kind*
 The "kind" item uses a single letter to indicate the kind of completion.  This
 may be used to show the completion differently (different color or icon).
 Currently these types can be used:

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 8.1.  Last change: 2019 Aug 16
+*intro.txt*     For Vim version 8.1.  Last change: 2019 Nov 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -234,7 +234,7 @@ Vim would never have become what it is now, without the help of these people!
 	Sung-Hyun Nam		Work on multi-byte versions
 	Vince Negri		Win32 GUI and generic console enhancements
 	Steve Oualline		Author of the first Vim book |frombook|
-	Dominique Pelle		valgrind reports and many fixes
+	Dominique Pelle		Valgrind reports and many fixes
 	A.Politz		Many bug reports and some fixes
 	George V. Reilly	Win32 port, Win32 GUI start-off
 	Stephen Riehm		bug collector

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.1.  Last change: 2019 Jun 02
+*map.txt*       For Vim version 8.1.  Last change: 2019 Nov 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -20,7 +20,8 @@ manual.
    1.8 Examples				|map-examples|
    1.9 Using mappings			|map-typing|
    1.10 Mapping alt-keys		|:map-alt-keys|
-   1.11 Mapping an operator		|:map-operator|
+   1.11 Mapping in modifyOtherKeys mode	|modifyOtherKeys|
+   1.12 Mapping an operator		|:map-operator|
 2. Abbreviations		|abbreviations|
 3. Local mappings and functions	|script-local|
 4. User-defined commands	|user-commands|
@@ -357,6 +358,8 @@ Some commands work both in Insert mode and Command-line mode, some not:
 :cmap  :cnoremap  :cunmap  :cmapclear	     -	       yes	   -
 :lmap  :lnoremap  :lunmap  :lmapclear	    yes*       yes*	  yes*
 
+* If 'iminsert' is 1, see |language-mapping| below.
+
 The original Vi did not have separate mappings for
 Normal/Visual/Operator-pending mode and for Insert/Command-line mode.
 Therefore the ":map" and ":map!" commands enter and display mappings for
@@ -777,6 +780,9 @@ In the GUI Vim handles the Alt key itself, thus mapping keys with ALT should
 always work.  But in a terminal Vim gets a sequence of bytes and has to figure
 out whether ALT was pressed or not.
 
+If the terminal supports the modifyOtherKeys mode and it has been enabled,
+then Vim can recognize more key combinations, see |modifyOtherKeys| below.
+
 By default Vim assumes that pressing the ALT key sets the 8th bit of a typed
 character.  Most decent terminals can work that way, such as xterm, aterm and
 rxvt.  If your <A-k> mappings don't work it might be that the terminal is
@@ -814,7 +820,39 @@ on the terminal; that's a good last resource in case you want to send ESC when
 using other applications but not when inside Vim.
 
 
-1.11 MAPPING AN OPERATOR				*:map-operator*
+1.11 MAPPING IN modifyOtherKeys mode			*modifyOtherKeys*
+
+Xterm and a few other terminals can be put in a mode where keys with modifiers
+are sent with a special escape code.  Vim recognizes these codes and can then
+make a difference between CTRL-H and Backspace, even when Backspace sends the
+character 8.  And many more special keys.
+
+For xterm modifyOtherKeys is enabled in the builtin termcap entry.  If this is
+not used you can enable modifyOtherKeys with these lines in your vimrc: >
+      let &t_TI = "\<Esc>[>4;2m"
+      let &t_TE = "\<Esc>[>4;m"
+
+In case the modifyOtherKeys mode causes problems you can disable it: >
+      let &t_TI = ""
+      let &t_TE = ""
+It does not take effect immediately.  To have this work without restarting Vim
+execute a shell command, e.g.: `!ls`  Or put the lines in your |vimrc|.
+
+When modifyOtherKeys is enabled you can map <C-[> and <C-S-{>: >
+	imap <C-[> [[[
+	imap <C-S-{> {{{
+Without modifyOtherKeys <C-[> and <C-S-{> are indistinguishable from Esc.
+
+A known side effect effect is that in Insert mode the raw escape sequence is
+inserted after the CTRL-V key.  This can be used to check whether
+modifyOtherKeys is enabled: In Insert mode type CTRL-V CTRL-V, if you get
+one byte then modifyOtherKeys is off, if you get <1b>27;5;118~ then it is on.
+
+When the 'esckeys' option is off, then modifyOtherKeys will be disabled in
+Insert mode to avoid every key with a modifier causing Insert mode to end.
+
+
+1.12 MAPPING AN OPERATOR				*:map-operator*
 
 An operator is used before a {motion} command.  To define your own operator
 you must create mapping that first sets the 'operatorfunc' option and then

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 8.1.  Last change: 2019 Aug 23
+*message.txt*   For Vim version 8.1.  Last change: 2019 Oct 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -480,7 +480,7 @@ try to solve the memory shortage.  To stay on the safe side, exit Vim and
 start again.
 
 If this happens while Vim is still initializing, editing files is very
-unlikely to work, therefore Vim will exit with value 123. 
+unlikely to work, therefore Vim will exit with value 123.
 
 Buffers are only partly kept in memory, thus editing a very large file is
 unlikely to cause an out-of-memory situation.  Undo information is completely
@@ -582,7 +582,8 @@ allowed for the command that was used.
 Vim was not able to create a swap file.  You can still edit the file, but if
 Vim unexpectedly exits the changes will be lost.  And Vim may consume a lot of
 memory when editing a big file.  You may want to change the 'directory' option
-to avoid this error.  See |swap-file|.
+to avoid this error.  This error is not given when 'directory' is empty.  See
+|swap-file|.
 
 							*E140*  >
   Use ! to write partial buffer

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.1.  Last change: 2019 Jun 02
+*motion.txt*    For Vim version 8.1.  Last change: 2019 Nov 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -227,6 +227,12 @@ g^			When lines wrap ('wrap' on): To the first non-blank
 gm			Like "g0", but half a screenwidth to the right (or as
 			much as possible).
 
+							*gM*
+gM			Like "g0", but to halfway the text of the line.
+			With a count: to this percentage of text in the line.
+			Thus "10gM" is near the start of the text and "90gM"
+			is near the end of the text.
+
 							*g$* *g<End>*
 g$ or g<End>		When lines wrap ('wrap' on): To the last character of
 			the screen line and [count - 1] screen lines downward
@@ -958,6 +964,7 @@ These commands are not marks themselves, but jump to a mark:
 			- numbered marks '0 - '9
 			- last insert position '^
 			- last change position '.
+			- last affected text area '[ and ']
 			- the Visual area '< and '>
 			- line numbers in placed signs
 			- line numbers in quickfix positions

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.1.  Last change: 2019 Aug 21
+*options.txt*	For Vim version 8.1.  Last change: 2019 Nov 10
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -856,6 +856,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 		:set background&
 <	Vim will guess the value.  In the GUI this should work correctly,
 	in other cases Vim might not be able to guess the right value.
+	If the GUI supports a dark theme, you can use the "d" flag in
+	'guioptions', see 'go-d'.
 
 	When the |t_RB| option is set, Vim will use it to request the background
 	color from the terminal.  If the returned RGB value is dark/light and
@@ -1683,8 +1685,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 'comments' 'com'	string	(default
 				"s1:/*,mb:*,ex:*/,://,b:#,:%,:XCOMM,n:>,fb:-")
 			local to buffer
-			{not available when compiled without the |+comments|
-			feature}
 	A comma separated list of strings that can start a comment line.  See
 	|format-comments|.  See |option-backslash| about using backslashes to
 	insert a space.
@@ -1877,7 +1877,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'completeslash'* *'csl'*
 'completeslash' 'csl'	string	(default: "")
 			local to buffer
-			{not in Vi}  {only for MS-Windows}
+			{only for MS-Windows}
 	When this option is set it overrules 'shellslash' for completion:
 	- When this option is set to "slash", a forward slash is used for path
 	  completion in insert mode. This is useful when editing HTML tag, or
@@ -1917,7 +1917,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 		    completion in a popup window.  Only works in combination
 		    with "menu" or "menuone".  Overrides "preview".
 		    See |'completepopup'| for specifying properties.
-		    {only works when compiled with the +textprop feature}
+		    {only works when compiled with the |+textprop| feature}
+
+	   popuphidden
+	   	    Just like "popup" but initially hide the popup.  Use a
+		    |CompleteChanged| autocommand to fetch the info and call
+		    |popup_show()| once the popup has been filled.
+		    See the example at |complete-popuphidden|.
+		    {only works when compiled with the |+textprop| feature}
 
 	   noinsert Do not insert any text for a match until the user selects
 		    a match from the menu. Only works in combination with
@@ -2461,13 +2468,32 @@ A jump table for the options with a short description can be found at |Q_op|.
 			local to window
 			{not available when compiled without the |+syntax|
 			feature}
-	Highlight the screen line of the cursor with CursorLine
-	|hl-CursorLine|.  Useful to easily spot the cursor.  Will make screen
-	redrawing slower.
+	Highlight the text line of the cursor with CursorLine |hl-CursorLine|.
+	Useful to easily spot the cursor.  Will make screen redrawing slower.
 	When Visual mode is active the highlighting isn't used to make it
 	easier to see the selected text.
 
 
+						*'cursorlineopt'* *'culopt'*
+'cursorlineopt' 'culopt' string (default: "number,line")
+			local to window
+			{not available when compiled without the |+syntax|
+			feature}
+	Comma separated list of settings for how 'cursorline' is displayed.
+	Valid values:
+	"line"		Highlight the text line of the cursor with
+			CursorLine |hl-CursorLine|.
+	"screenline"	Highlight only the screen line of the cursor with
+			CursorLine |hl-CursorLine|.
+	"number"	Highlight the line number of the cursor with
+			CursorLineNr |hl-CursorLineNr|.
+
+	Special value:
+	"both"		Alias for the values "line,number".
+
+	"line" and "screenline" cannot be used together.
+
+
 						*'debug'*
 'debug'			string	(default "")
 			global
@@ -2565,7 +2591,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	security reasons.
 
 						*'dip'* *'diffopt'*
-'diffopt' 'dip'		string	(default "internal,filler")
+'diffopt' 'dip'		string	(default "internal,filler,closeoff")
 			global
 			{not available when compiled without the |+diff|
 			feature}
@@ -2624,6 +2650,12 @@ A jump table for the options with a short description can be found at |Q_op|.
 		vertical	Start diff mode with vertical splits (unless
 				explicitly specified otherwise).
 
+		closeoff	When a window is closed where 'diff' is set
+				and there is only one window remaining in the
+				same tab page with 'diff' set, execute
+				`:diffoff` in that window.  This undoes a
+				`:diffsplit` command.
+
 		hiddenoff	Do not use diff mode for a buffer when it
 				becomes hidden.
 
@@ -2674,7 +2706,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	- The swap file will be created in the first directory where this is
 	  possible.
 	- Empty means that no swap file will be used (recovery is
-	  impossible!).
+	  impossible!) and no |E303| error will be given.
 	- A directory "." means to put the swap file in the same directory as
 	  the edited file.  On Unix, a dot is prepended to the file name, so
 	  it doesn't show in a directory listing.  On MS-Windows the "hidden"
@@ -2907,6 +2939,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	won't work by default.
 	NOTE: This option is set to the Vi default value when 'compatible' is
 	set and to the Vim default value when 'compatible' is reset.
+	NOTE: when this option is off then the |modifyOtherKeys| functionality
+	is disabled while in Insert mode to avoid ending Insert mode with any
+	key that has a modifier.
 
 						*'eventignore'* *'ei'*
 'eventignore' 'ei'	string	(default "")
@@ -3720,6 +3755,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 								*'go-c'*
 	  'c'	Use console dialogs instead of popup dialogs for simple
 		choices.
+								*'go-d'*
+	  'd'	Use dark theme variant if available. Currently only works for
+		GTK+ GUI.
 								*'go-e'*
 	  'e'	Add tab pages when indicated with 'showtabline'.
 		'guitablabel' can be used to change the text in the labels.
@@ -3894,6 +3932,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 				     "8:SpecialKey,~:EndOfBuffer,@:NonText,
 				     d:Directory,e:ErrorMsg,i:IncSearch,
 				     l:Search,m:MoreMsg,M:ModeMsg,n:LineNr,
+				     a:LineNrAbove,b:LineNrBelow,
 				     N:CursorLineNr,r:Question,s:StatusLine,
 				     S:StatusLineNC,c:VertSplit,t:Title,
 				     v:Visual,V:VisualNOS,w:WarningMsg,
@@ -3925,6 +3964,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 	|hl-ModeMsg|	 M  Mode (e.g., "-- INSERT --")
 	|hl-LineNr|	 n  line number for ":number" and ":#" commands, and
 			    when 'number' or 'relativenumber' option is set.
+	|hl-LineNrAbove|   a  line number above the cursor for when the
+			    'relativenumber' option is set.
+	|hl-LineNrBelow|   b  line number below the cursor for when the
+			    'relativenumber' option is set.
 	|hl-CursorLineNr|  N like n for when 'cursorline' or 'relativenumber' is
 			    set.
 	|hl-Question|	 r  |hit-enter| prompt and yes/no questions
@@ -4817,9 +4860,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 			off and the line continues beyond the right of the
 			screen.
 							*lcs-precedes*
-	  precedes:c	Character to show in the first column, when 'wrap'
-			is off and there is text preceding the character
-			visible in the first column.
+	  precedes:c	Character to show in the first visible column of the
+			physical line, when there is text preceding the
+			character visible in the first column.
 							*lcs-conceal*
 	  conceal:c	Character to show in place of concealed text, when
 			'conceallevel' is set to 1.
@@ -5162,12 +5205,11 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'mouse'* *E538*
 'mouse'			string	(default "", "a" for GUI, MS-DOS and Win32,
-						 set to "a" in |defaults.vim|)
+					set to "a" or "nvi" in |defaults.vim|)
 			global
-	Enable the use of the mouse.  Only works for certain terminals
-	(xterm, MS-DOS, Win32 |win32-mouse|, QNX pterm, *BSD console with
-	sysmouse and Linux console with gpm).  For using the mouse in the
-	GUI, see |gui-mouse|.
+	Enable the use of the mouse.  Works for most terminals (xterm, MS-DOS,
+	Win32 |win32-mouse|, QNX pterm, *BSD console with sysmouse and Linux
+	console with gpm).  For using the mouse in the GUI, see |gui-mouse|.
 	The mouse can be enabled for different modes:
 		n	Normal mode and Terminal modes
 		v	Visual mode
@@ -5178,7 +5220,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 		r	for |hit-enter| and |more-prompt| prompt
 	Normally you would enable the mouse in all five modes with: >
 		:set mouse=a
-<	When the mouse is not enabled, the GUI will still use the mouse for
+<	If your terminal can't overrule the mouse events going to the
+	application, use: >
+		:set mouse=nvi
+<	The you can press ":", select text for the system, and press Esc to go
+	back to Vim using the mouse events.
+	In |defaults.vim| "nvi" is used if the 'term' option is not matching
+	"xterm".
+
+	When the mouse is not enabled, the GUI will still use the mouse for
 	modeless selection.  This doesn't move the text cursor.
 
 	See |mouse-using|.  Also see |'clipboard'|.
@@ -5197,6 +5247,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	mouse pointer is moved to the window with keyboard focus.  Off is the
 	default because it makes using the pull down menus a little goofy, as
 	a pointer transit may activate a window unintentionally.
+	MS-Windows: Also see 'scrollfocus' for what window is scrolled when
+	using the mouse scroll whel.
 
 			*'mousehide'* *'mh'* *'nomousehide'* *'nomh'*
 'mousehide' 'mh'	boolean	(default on)
@@ -6241,6 +6293,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 	file.  This means that ":split | edit file" results in two windows
 	with scroll-binding, but ":split file" does not.
 
+			*'scrollfocus'* *'scf'* *'noscrollfocus'* *'noscf'*
+'scrollfocus' 'scf'	boolean  (default off)
+			global
+			{only for MS-Windows GUI}
+	When using the scroll wheel and this option is set, the window under
+	the mouse pointer is scrolled.  With this option off the current
+	window is scrolled.
+	Systems other than MS-Windows always behave like this option is on.
+
 						*'scrolljump'* *'sj'*
 'scrolljump' 'sj'	number	(default 1)
 			global
@@ -6412,8 +6473,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	See |option-backslash| about including spaces and backslashes.
 	Environment variables are expanded |:set_env|.
 
-	If the name of the shell contains a space, you might need to enclose
-	it in quotes or escape the space.  Example with quotes: >
+	If the name of the shell contains a space, you need to enclose it in
+	quotes and escape the space.  Example with quotes: >
 		:set shell=\"c:\program\ files\unix\sh.exe\"\ -f
 <	Note the backslash before each quote (to avoid starting a comment) and
 	each space (to avoid ending the option value).  Also note that the
@@ -6468,10 +6529,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 	For Unix the default it "| tee".  The stdout of the compiler is saved
 	in a file and echoed to the screen.  If the 'shell' option is "csh" or
 	"tcsh" after initializations, the default becomes "|& tee".  If the
-	'shell' option is "sh", "ksh", "mksh", "pdksh", "zsh" or "bash" the
-	default becomes "2>&1| tee".  This means that stderr is also included.
-	Before using the 'shell' option a path is removed, thus "/bin/sh" uses
-	"sh".
+	'shell' option is "sh", "ksh", "mksh", "pdksh", "zsh", "zsh-beta",
+	"bash" or "fish" the default becomes "2>&1| tee".  This means that
+	stderr is also included.  Before using the 'shell' option a path is
+	removed, thus "/bin/sh" uses "sh".
 	The initialization of this option is done after reading the ".vimrc"
 	and the other initializations, so that when the 'shell' option is set
 	there, the 'shellpipe' option changes automatically, unless it was
@@ -6511,13 +6572,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The name of the temporary file can be represented by "%s" if necessary
 	(the file name is appended automatically if no %s appears in the value
 	of this option).
-	The default is ">".  For Unix, if the 'shell' option is "csh", "tcsh"
-	or "zsh" during initializations, the default becomes ">&".  If the
-	'shell' option is "sh", "ksh" or "bash" the default becomes
-	">%s 2>&1".  This means that stderr is also included.
-	For Win32, the Unix checks are done and additionally "cmd" is checked
-	for, which makes the default ">%s 2>&1".  Also, the same names with
-	".exe" appended are checked for.
+	The default is ">".  For Unix, if the 'shell' option is "csh" or
+	"tcsh" during initializations, the default becomes ">&".  If the
+	'shell' option is "sh", "ksh", "mksh", "pdksh", "zsh",
+	"zsh-beta","bash" or "fish", the default becomes ">%s 2>&1".  This
+	means that stderr is also included.  For Win32, the Unix checks are
+	done and additionally "cmd" is checked for, which makes the default
+	">%s 2>&1".  Also, the same names with ".exe" appended are checked
+	for.
 	The initialization of this option is done after reading the ".vimrc"
 	and the other initializations, so that when the 'shell' option is set
 	there, the 'shellredir' option changes automatically unless it was
@@ -6697,7 +6759,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'showbreak'* *'sbr'* *E595*
 'showbreak' 'sbr'	string	(default "")
-			global
+			global or local to window |global-local|
 			{not available when compiled without the |+linebreak|
 			feature}
 	String to put at the start of lines that have been wrapped.  Useful
@@ -6714,7 +6776,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Note that tabs after the showbreak will be displayed differently.
 	If you want the 'showbreak' to appear in between line numbers, add the
 	"n" flag to 'cpoptions'.
-
+	A window-local value overrules a global value.  If the global value is
+	set and you want no value in the current window use NONE: >
+		:setlocal showbreak=NONE
+<
 				     *'showcmd'* *'sc'* *'noshowcmd'* *'nosc'*
 'showcmd' 'sc'		boolean	(Vim default: on, off for Unix,
 				       Vi default: off, set in |defaults.vim|)
@@ -7352,6 +7417,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   vsplit	Just like "split" but split vertically.
 	   newtab	Like "split", but open a new tab page.  Overrules
 			"split" when both are present.
+	   uselast	If included, jump to the previously used window when
+			jumping to errors with |quickfix| commands.
 
 						*'synmaxcol'* *'smc'*
 'synmaxcol' 'smc'	number	(default 3000)
@@ -8152,8 +8219,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 						Win32 and OS/2)
 			global or local to buffer |global-local|
 	Maximum number of changes that can be undone.  Since undo information
-	is kept in memory, higher numbers will cause more memory to be used
-	(nevertheless, a single change can use an unlimited amount of memory).
+	is kept in memory, higher numbers will cause more memory to be used.
+	Nevertheless, a single change can already use a large amount of memory.
 	Set to 0 for Vi compatibility: One level of undo and "u" undoes
 	itself: >
 		set ul=0
@@ -8540,8 +8607,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	":map <BS> X" to make backspace delete the character in front of the
 	cursor.
 	When 'l' is included and it is used after an operator at the end of a
-	line then it will not move to the next line.  This makes "dl", "cl",
-	"yl" etc. work normally.
+	line (not an empty line) then it will not move to the next line.  This
+	makes "dl", "cl", "yl" etc. work normally.
 	NOTE: This option is set to the Vi default value when 'compatible' is
 	set and to the Vim default value when 'compatible' is reset.
 
@@ -8659,6 +8726,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			complete first match.
 	"list:longest"	When more than one match, list all matches and
 			complete till longest common string.
+	"list:lastused" When more than one buffer matches, sort buffers
+			by time last used (other than the current buffer).
 	When there is only a single match, it is fully completed in all cases.
 
 	Examples: >

runtime/doc/pi_netrw.txt

@@ -1,4 +1,4 @@
-*pi_netrw.txt*  For Vim version 8.1.  Last change: 2019 Jul 17
+*pi_netrw.txt*  For Vim version 8.1.  Last change: 2019 Nov 14
 
 	    ------------------------------------------------
 	    NETRW REFERENCE MANUAL    by Charles E. Campbell
@@ -3512,7 +3512,7 @@ Example: Clear netrw's marked file list via a mapping on gu >
 			- Click "Add..."
 			- Set External Editor (adjust path as needed, include
 			  the quotes and !.! at the end):
-			    "c:\Program Files\Vim\vim70\gvim.exe" !.!
+			    "c:\Program Files\Vim\vim81\gvim.exe" !.!
 			- Check that the filetype in the box below is
 			  {asterisk}.{asterisk} (all files), or whatever types
 			  you want (cec: change {asterisk} to * ; I had to
@@ -3762,8 +3762,8 @@ by obtaining a copy of the latest (often developmental) netrw at:
 
 The <netrw.vim> script is typically installed on systems as something like:
 >
-	/usr/local/share/vim/vim7x/plugin/netrwPlugin.vim
-	/usr/local/share/vim/vim7x/autoload/netrw.vim
+	/usr/local/share/vim/vim8x/plugin/netrwPlugin.vim
+	/usr/local/share/vim/vim8x/autoload/netrw.vim
 		(see output of :echo &rtp)
 <
 which is loaded automatically at startup (assuming :set nocp).  If you
@@ -3842,6 +3842,8 @@ netrw:
 ==============================================================================
 12. History						*netrw-history* {{{1
 
+	v166:	Nov 06, 2019	* Removed a space from a nmap for "-"
+				* Numerous debugging statement changes
 	v163:	Dec 05, 2017	* (Cristi Balan) reported that a setting ('sel')
 				  was left changed
 				* (Holger Mitschke) reported a problem with
@@ -3852,6 +3854,8 @@ netrw:
 				* (Holger Mitschke) amended this help file
 				  with additional |g:netrw_special_syntax|
 				  items
+				* Prioritized wget over curl for
+				  g:netrw_http_cmd
 	v162:	Sep 19, 2016	* (haya14busa) pointed out two syntax errors
 				  with a patch; these are now fixed.
 		Oct 26, 2016	* I started using mate-terminal and found that
@@ -4285,4 +4289,4 @@ netrw:
 
 ==============================================================================
 Modelines: {{{1
- vim:tw=78:ts=8:noet:ft=help:norl:fdm=marker
+ vim:tw=78:ts=8:ft=help:norl:fdm=marker

runtime/doc/popup.txt

@@ -1,4 +1,4 @@
-*popup.txt*  For Vim version 8.1.  Last change: 2019 Sep 04
+*popup.txt*  For Vim version 8.1.  Last change: 2019 Nov 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -137,9 +137,7 @@ Options can be set on the window with `setwinvar()`, e.g.: >
 	call setwinvar(winid, '&wrap', 0)
 And options can be set on the buffer with `setbufvar()`, e.g.: >
 	call setbufvar(winbufnr(winid), '&filetype', 'java')
-Note that this does not trigger autocommands.  Use `win_execute()` if you do
-need them.
-
+You can also use `win_execute()` with a ":setlocal" command.
 
 
 ==============================================================================
@@ -188,6 +186,8 @@ popup_atcursor({what}, {options})			*popup_atcursor()*
 				\ moved: 'WORD',
 				\ })
 <		Use {options} to change the properties.
+		If "pos" is passed as "topleft" then the default for "line"
+		becomes "cursor+1".
 
 		Can also be used as a |method|: >
 			GetText()->popup_atcursor({})
@@ -204,7 +204,7 @@ popup_beval({what}, {options})			*popup_beval()*
 			\ mousemoved: 'WORD',
 			\ })
 <		Use {options} to change the properties.
-		See |popup_beval_example| for an example use.
+		See |popup_beval_example| for an example.
 
 		Can also be used as a |method|: >
 			GetText()->popup_beval({})
@@ -307,8 +307,9 @@ popup_findinfo()					*popup_findinfo()*
 		Get the |window-ID| for the popup info window, as it used by
 		the popup menu.  See |complete-popup|.  The info popup is
 		hidden when not used, it can be deleted with |popup_clear()|
-		and |popup_close()|.
-		Return zero if there is none.
+		and |popup_close()|.  Use |popup_show()| to reposition it to
+		the item in the popup menu.
+		Returns zero if there is none.
 
 
 popup_findpreview()					*popup_findpreview()*
@@ -316,7 +317,6 @@ popup_findpreview()					*popup_findpreview()*
 		Return zero if there is none.
 
 
-
 popup_getoptions({id})					*popup_getoptions()*
 		Return the {options} for popup {id} in a Dict.
 		A zero value means the option was not set.  For "zindex" the
@@ -363,7 +363,9 @@ popup_getpos({id})					*popup_getpos()*
 		    core_width	width of the text box in screen cells
 		    core_height	height of the text box in screen cells
 		    firstline	line of the buffer at top (1 unless scrolled)
-		    		(not the value of the "firstline" property)
+				(not the value of the "firstline" property)
+		    lastline	line of the buffer at the bottom (updated when
+				the popup is redrawn)
 		    scrollbar	non-zero if a scrollbar is displayed
 		    visible	one if the popup is displayed, zero if hidden
 		Note that these are the actual screen positions.  They differ
@@ -476,6 +478,8 @@ popup_notification({what}, {options})			 *popup_notification()*
 popup_show({id})						*popup_show()*
 		If {id} is a hidden popup, show it now.
 		For {id} see `popup_hide()`.
+		If {id} is the info popup it will be positioned next to the
+		current popup menu item.
 
 
 popup_setoptions({id}, {options})			*popup_setoptions()*
@@ -540,6 +544,10 @@ properties.  It is in one of four forms:
 			dictionary with a "col" entry, see below:
 			|popup-props|.
 
+If you want to create a new buffer yourself use |bufadd()| and pass the buffer
+number to popup_create().
+It is not possible to use the buffer of a terminal window. *E278*
+
 The second argument of |popup_create()| is a dictionary with options:
 	line		Screen line where to position the popup.  Can use a
 			number or "cursor", "cursor+1" or "cursor-1" to use
@@ -561,6 +569,11 @@ The second argument of |popup_create()| is a dictionary with options:
 			Alternatively "center" can be used to position the
 			popup in the center of the Vim window, in which case
 			"line" and "col" are ignored.
+	posinvert	When FALSE the value of "pos" is always used.  When
+			TRUE (the default) and the popup does not fit
+			vertically and there is more space on the other side
+			then the popup is placed on the other side of the
+			position indicated by "line".
 	textprop	When present the popup is positioned next to a text
 			property with this name and will move when the text
 			property moves.  Use an empty string to remove.  See
@@ -678,8 +691,15 @@ The second argument of |popup_create()| is a dictionary with options:
 			- "expr": if the cursor moved outside |<cexpr>|
 			- [{start}, {end}]: if the cursor moved before column
 			  {start} or after {end}
+			- [{lnum}, {start}, {end}]: if the cursor moved away
+			  from line {lnum}, before column {start} or after
+			  {end}
+			- [0, 0, 0] do not close the popup when the cursor
+			  moves
 			The popup also closes if the cursor moves to another
 			line or to another window.
+	mousemoved	Like "moved" but referring to the mouse pointer
+			position
 	cursorline	non-zero: Highlight the cursor line. Also scrolls the
 				  text to show this line (only works properly
 				  when 'wrap' is off).
@@ -742,22 +762,22 @@ is inserted or deleted.  The popup functions like a tooltip.
 These steps are needed to make this work:
 
 - Define a text property type, it defines the name. >
-  	call prop_type_add('popupMarker', {})
+	call prop_type_add('popupMarker', {})
 
 - Place a text property at the desired text: >
 	let lnum = {line of the text}
 	let col = {start column of the text}
 	let len = {length of the text}
 	let propId = {arbitrary but unique number}
-  	call prop_add(lnum, col, #{
+	call prop_add(lnum, col, #{
 		\ length: len,
 		\ type: 'popupMarker',
 		\ id: propId,
 		\ })
 
 - Create a popup: >
-  	let winid = popup_create('the text', #{
-		\ pos: 'botleft', 
+	let winid = popup_create('the text', #{
+		\ pos: 'botleft',
 		\ textprop: 'popupMarker',
 		\ textpropid: propId,
 		\ border: [],
@@ -797,7 +817,7 @@ Some hints:
   a click, as in the example above, helps for that.
 - If the text property is removed the popup is closed.  Use something like
   this: >
-  	call prop_remove(#{type: 'popupMarker', id: propId})
+	call prop_remove(#{type: 'popupMarker', id: propId})
 
 
 POPUP FILTER						*popup-filter*
@@ -842,9 +862,8 @@ Some recommended key actions:
 	cursor keys	select another entry
 	Tab		accept current suggestion
 
-A mouse click arrives as <LeftMouse>.  The coordinates are in
-v:mouse_popup_col and v:mouse_popup_row.  The top-left screen cell of the
-popup is col 1, row 1 (not counting the border).
+A mouse click arrives as <LeftMouse>.  The coordinates can be obtained with
+|getmousepos()|.
 
 Vim provides standard filters |popup_filter_menu()| and
 |popup_filter_yesno()|.

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 8.1.  Last change: 2019 Aug 06
+*quickfix.txt*  For Vim version 8.1.  Last change: 2019 Oct 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -486,7 +486,7 @@ EXECUTE A COMMAND IN ALL THE BUFFERS IN QUICKFIX OR LOCATION LIST:
 				etc.
 <			When the current file can't be |abandon|ed and the [!]
 			is not present, the command fails.
-			When an error is detected execution stops.
+			When going to the next entry fails execution stops.
 			The last buffer (or where an error occurred) becomes
 			the current buffer.
 			{cmd} can contain '|' to concatenate several commands.

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 8.1.  Last change: 2019 Aug 20
+*quickref.txt*  For Vim version 8.1.  Last change: 2019 Nov 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -47,6 +47,7 @@ N is used to indicate an optional count that can be given before the command.
 |g$|	N  g$		to last character in screen line (differs from "$"
 			   when lines wrap)
 |gm|	   gm		to middle of the screen line
+|gM|	   gM		to middle of the line
 |bar|	N  |		to column N (default: 1)
 |f|	N  f{char}	to the Nth occurrence of {char} to the right
 |F|	N  F{char}	to the Nth occurrence of {char} to the left
@@ -291,7 +292,7 @@ moving around:
 |i_CTRL-A|	CTRL-A		  insert previously inserted text
 |i_CTRL-@|	CTRL-@		  insert previously inserted text and stop
 				     Insert mode
-|i_CTRL-R|	CTRL-R {0-9a-z%#:.-="}  insert the contents of a register
+|i_CTRL-R|	CTRL-R {register} insert the contents of a register
 
 |i_CTRL-N|	CTRL-N		  insert next match of identifier before the
 				     cursor
@@ -670,6 +671,7 @@ Short explanation of each option:		*option-list*
 'cursorbind'	  'crb'     move cursor in window as it moves in other windows
 'cursorcolumn'	  'cuc'	    highlight the screen column of the cursor
 'cursorline'	  'cul'	    highlight the screen line of the cursor
+'cursorlineopt'	  'culopt'  settings for 'cursorline'
 'debug'			    set to "msg" to see all error messages
 'define'	  'def'     pattern to be used to find a macro definition
 'delcombine'	  'deco'    delete combining characters on their own
@@ -867,6 +869,7 @@ Short explanation of each option:		*option-list*
 'runtimepath'	  'rtp'     list of directories used for runtime files
 'scroll'	  'scr'     lines to scroll with CTRL-U and CTRL-D
 'scrollbind'	  'scb'     scroll in window as other windows scroll
+'scrollfocus'	  'scf'     scroll wheel applies to window under pointer
 'scrolljump'	  'sj'	    minimum number of lines to scroll
 'scrolloff'	  'so'	    minimum nr. of lines above and below cursor
 'scrollopt'	  'sbo'     how 'scrollbind' should behave
@@ -1076,8 +1079,7 @@ Short explanation of each option:		*option-list*
 				      three digits)
 |c_CTRL-K|	CTRL-K {char1} {char2}
 				   enter digraph (See |Q_di|)
-|c_CTRL-R|	CTRL-R {0-9a-z"%#:-=}
-				   insert the contents of a register
+|c_CTRL-R|	CTRL-R {register}  insert the contents of a register
 
 |c_<Left>|	<Left>/<Right>	   cursor left/right
 |c_<S-Left>|	<S-Left>/<S-Right> cursor one word left/right

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 8.1.  Last change: 2019 Jun 14
+*repeat.txt*    For Vim version 8.1.  Last change: 2019 Sep 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -219,10 +219,10 @@ For writing a Vim script, see chapter 41 of the user manual |usr_41.txt|.
 
 			When {file} contains wildcards it is expanded to all
 			matching files.  Example: >
-				:runtime! plugin/*.vim
+				:runtime! plugin/**/*.vim
 <			This is what Vim uses to load the plugin files when
 			starting up.  This similar command: >
-				:runtime plugin/*.vim
+				:runtime plugin/**/*.vim
 <			would source the first file only.
 
 			When 'verbose' is one or higher, there is a message

runtime/doc/sign.txt

@@ -1,4 +1,4 @@
-*sign.txt*      For Vim version 8.1.  Last change: 2019 Sep 06
+*sign.txt*      For Vim version 8.1.  Last change: 2019 Nov 12
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -48,8 +48,8 @@ When signs are defined for a file, Vim will automatically add a column of two
 characters to display them in.  When the last sign is unplaced the column
 disappears again.  This behavior can be changed with the 'signcolumn' option.
 
-The color of the column is set with the SignColumn group |hl-SignColumn|.
-Example to set the color: >
+The color of the column is set with the SignColumn highlight group
+|hl-SignColumn|.  Example to set the color: >
 
 	:highlight SignColumn guibg=darkgrey
 <
@@ -71,6 +71,8 @@ placed in the named group. The sign identifier is unique within a group. The
 sign group allows Vim plugins to use unique signs without interfering with
 other plugins using signs.
 
+The group name "popupmenu" is used by popup windows where 'cursorline' is set.
+
 							*sign-priority*
 Each placed sign is assigned a priority value. When multiple signs are placed
 on the same line, the attributes of the sign with the highest priority is used

runtime/doc/syntax.txt

@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 8.1.  Last change: 2019 Jul 15
+*syntax.txt*	For Vim version 8.1.  Last change: 2019 Nov 14
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -60,8 +60,8 @@ If the VIM environment variable is not set, Vim will try to find
 the path in another way (see |$VIMRUNTIME|).  Usually this works just
 fine.  If it doesn't, try setting the VIM environment variable to the
 directory where the Vim stuff is located.  For example, if your syntax files
-are in the "/usr/vim/vim50/syntax" directory, set $VIMRUNTIME to
-"/usr/vim/vim50".  You must do this in the shell, before starting Vim.
+are in the "/usr/vim/vim81/syntax" directory, set $VIMRUNTIME to
+"/usr/vim/vim81".  You must do this in the shell, before starting Vim.
 This command also sources the |menu.vim| script when the GUI is running or
 will start soon.  See |'go-M'| about avoiding that.
 
@@ -476,6 +476,16 @@ conversion. See |-E| and |-s-ex| for details. It is probably best to create a
 script to replace all the -c commands and use it with the -u flag instead of
 specifying each command separately.
 
+				    *hl-TOhtmlProgress* *TOhtml-progress-color*
+When displayed, the progress bar will show colored boxes along the statusline
+as the HTML conversion proceeds. By default, the background color as the
+current "DiffDelete" highlight group is used. If "DiffDelete" and "StatusLine"
+have the same background color, TOhtml will automatically adjust the color to
+differ. If you do not like the automatically selected colors, you can define
+your own highlight colors for the progress bar. Example: >
+
+	hi TOhtmlProgress guifg=#c0ffee ctermbg=7
+<
 							 *g:html_number_lines*
 Default: current 'number' setting.
 When 0, buffer text is displayed in the generated HTML without line numbering.
@@ -507,8 +517,8 @@ For example: >
 <
 							      *g:html_use_css*
 Default: 1.
-When 1, generate valid HTML 4.01 markup with CSS1 styling, supported in all
-modern browsers and most old browsers.
+When 1, generate valid HTML 5 markup with CSS styling, supported in all modern
+browsers and many old browsers.
 When 0, generate <font> tags and similar outdated markup. This is not
 recommended but it may work better in really old browsers, email clients,
 forum posts, and similar situations where basic CSS support is unavailable.
@@ -580,23 +590,43 @@ affected in this way as follows:
 Example, to make the fold column and line numbers uncopyable: >
 	:let g:html_prevent_copy = "fn"
 <
-This feature is currently implemented by inserting read-only <input> elements
-into the markup to contain the uncopyable areas. This does not work well in
-all cases. When pasting to some applications which understand HTML, the
-<input> elements also get pasted. But plain-text paste destinations should
-always work.
+The method used to prevent copying in the generated page depends on the value
+of |g:html_use_input_for_pc|.
+
+						    *g:html_use_input_for_pc*
+Default: "fallback"
+If |g:html_prevent_copy| is non-empty, then:
+
+When "all", read-only <input> elements are used in place of normal text for
+uncopyable regions. In some browsers, especially older browsers, after
+selecting an entire page and copying the selection, the <input> tags are not
+pasted with the page text. If |g:html_no_invalid| is 0, the <input> tags have
+invalid type; this works in more browsers, but the page will not validate.
+Note: this method does NOT work in recent versions of Chrome and equivalent
+browsers; the <input> tags get pasted with the text.
+
+When "fallback" (default value), the same <input> elements are generated for
+older browsers, but newer browsers (detected by CSS feature query) hide the
+<input> elements and instead use generated content in an ::before pseudoelement
+to display the uncopyable text. This method should work with the largest
+number of browsers, both old and new.
+
+When "none", the <input> elements are not generated at all. Only the
+generated-content method is used. This means that old browsers, notably
+Internet Explorer, will either copy the text intended not to be copyable, or
+the non-copyable text may not appear at all. However, this is the most
+standards-based method, and there will be much less markup.
 
 							   *g:html_no_invalid*
 Default: 0.
-When 0, if |g:html_prevent_copy| is non-empty, an invalid attribute is
-intentionally inserted into the <input> element for the uncopyable areas. This
-increases the number of applications you can paste to without also pasting the
-<input> elements. Specifically, Microsoft Word will not paste the <input>
-elements if they contain this invalid attribute.
-When 1, no invalid markup is ever intentionally inserted, and the generated
-page should validate. However, be careful pasting into Microsoft Word when
-|g:html_prevent_copy| is non-empty; it can be hard to get rid of the <input>
-elements which get pasted.
+When 0, if |g:html_prevent_copy| is non-empty and |g:html_use_input_for_pc| is
+not "none", an invalid attribute is intentionally inserted into the <input>
+element for the uncopyable areas. This prevents pasting the <input> elements
+in some applications. Specifically, some versions of Microsoft Word will not
+paste the <input> elements if they contain this invalid attribute. When 1, no
+invalid markup is inserted, and the generated page should validate. However,
+<input> elements may be pasted into some applications and can be difficult to
+remove afterward.
 
 							 *g:html_hover_unfold*
 Default: 0.
@@ -1158,6 +1188,26 @@ startup vimrc: >
    :let filetype_w = "cweb"
 
 
+DART						*dart.vim* *ft-dart-syntax*
+
+Dart is an object-oriented, typed, class defined, garbage collected language
+used for developing mobile, desktop, web, and back-end applications.  Dart uses
+a C-like syntax derived from C, Java, and JavaScript, with features adopted
+from Smalltalk, Python, Ruby, and others.
+
+More information about the language and its development environment at the
+official Dart language website at https://dart.dev
+
+dart.vim syntax detects and highlights Dart statements, reserved words,
+type declarations, storage classes, conditionals, loops, interpolated values,
+and comments.  There is no support idioms from Flutter or any other Dart
+framework.
+
+Changes, fixes?  Submit an issue or pull request via:
+
+https://github.com/pr3d4t0r/dart-vim-syntax/
+
+
 DESKTOP					   *desktop.vim* *ft-desktop-syntax*
 
 Primary goal of this syntax file is to highlight .desktop and .directory files
@@ -1923,6 +1973,16 @@ displayed line.  The default value is 10.  The disadvantage of using a larger
 number is that redrawing can become slow.
 
 
+JSON						*json.vim* *ft-json-syntax*
+
+The json syntax file provides syntax highlighting with conceal support by
+default. To disable concealment: >
+	let g:vim_json_conceal = 0
+
+To disable syntax highlighting of errors: >
+	let g:vim_json_warnings = 0
+
+
 LACE						*lace.vim* *ft-lace-syntax*
 
 Lace (Language for Assembly of Classes in Eiffel) is case insensitive, but the
@@ -5041,8 +5101,15 @@ IncSearch	'incsearch' highlighting; also used for the text replaced with
 							*hl-LineNr*
 LineNr		Line number for ":number" and ":#" commands, and when 'number'
 		or 'relativenumber' option is set.
+							*hl-LineNrAbove*
+LineNrAbove	Line number for when the 'relativenumber'
+		option is set, above the cursor line.
+							*hl-LineNrBelow*
+LineNrBelow	Line number for when the 'relativenumber'
+		option is set, below the cursor line.
 							*hl-CursorLineNr*
-CursorLineNr	Like LineNr when 'cursorline' or 'relativenumber' is set for
+CursorLineNr	Like LineNr when 'cursorline' is set and 'cursorlineopt' is
+		set to "number" or "both", or 'relativenumber' is set, for
 		the cursor line.
 							*hl-MatchParen*
 MatchParen	The character under the cursor or just before it, if it

runtime/doc/tags

@@ -183,9 +183,11 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'csverb'	options.txt	/*'csverb'*
 'cuc'	options.txt	/*'cuc'*
 'cul'	options.txt	/*'cul'*
+'culopt'	options.txt	/*'culopt'*
 'cursorbind'	options.txt	/*'cursorbind'*
 'cursorcolumn'	options.txt	/*'cursorcolumn'*
 'cursorline'	options.txt	/*'cursorline'*
+'cursorlineopt'	options.txt	/*'cursorlineopt'*
 'cwh'	options.txt	/*'cwh'*
 'debug'	options.txt	/*'debug'*
 'deco'	options.txt	/*'deco'*
@@ -310,6 +312,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'go-a'	options.txt	/*'go-a'*
 'go-b'	options.txt	/*'go-b'*
 'go-c'	options.txt	/*'go-c'*
+'go-d'	options.txt	/*'go-d'*
 'go-e'	options.txt	/*'go-e'*
 'go-f'	options.txt	/*'go-f'*
 'go-g'	options.txt	/*'go-g'*
@@ -660,7 +663,9 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'nosb'	options.txt	/*'nosb'*
 'nosc'	options.txt	/*'nosc'*
 'noscb'	options.txt	/*'noscb'*
+'noscf'	options.txt	/*'noscf'*
 'noscrollbind'	options.txt	/*'noscrollbind'*
+'noscrollfocus'	options.txt	/*'noscrollfocus'*
 'noscs'	options.txt	/*'noscs'*
 'nosecure'	options.txt	/*'nosecure'*
 'nosft'	options.txt	/*'nosft'*
@@ -840,10 +845,12 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'sbr'	options.txt	/*'sbr'*
 'sc'	options.txt	/*'sc'*
 'scb'	options.txt	/*'scb'*
+'scf'	options.txt	/*'scf'*
 'scl'	options.txt	/*'scl'*
 'scr'	options.txt	/*'scr'*
 'scroll'	options.txt	/*'scroll'*
 'scrollbind'	options.txt	/*'scrollbind'*
+'scrollfocus'	options.txt	/*'scrollfocus'*
 'scrolljump'	options.txt	/*'scrolljump'*
 'scrolloff'	options.txt	/*'scrolloff'*
 'scrollopt'	options.txt	/*'scrollopt'*
@@ -1013,6 +1020,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 't_Sb'	term.txt	/*'t_Sb'*
 't_Sf'	term.txt	/*'t_Sf'*
 't_Si'	term.txt	/*'t_Si'*
+'t_TE'	term.txt	/*'t_TE'*
+'t_TI'	term.txt	/*'t_TI'*
 't_Te'	term.txt	/*'t_Te'*
 't_Ts'	term.txt	/*'t_Ts'*
 't_VS'	term.txt	/*'t_VS'*
@@ -4038,6 +4047,8 @@ E274	eval.txt	/*E274*
 E275	textprop.txt	/*E275*
 E276	eval.txt	/*E276*
 E277	remote.txt	/*E277*
+E278	popup.txt	/*E278*
+E279	terminal.txt	/*E279*
 E28	syntax.txt	/*E28*
 E280	if_tcl.txt	/*E280*
 E282	starting.txt	/*E282*
@@ -5001,6 +5012,8 @@ S	change.txt	/*S*
 SHELL	starting.txt	/*SHELL*
 SQLGetType	ft_sql.txt	/*SQLGetType*
 SQLSetType	ft_sql.txt	/*SQLSetType*
+SafeState	autocmd.txt	/*SafeState*
+SafeStateAgain	autocmd.txt	/*SafeStateAgain*
 Select	visual.txt	/*Select*
 Select-mode	visual.txt	/*Select-mode*
 Select-mode-mapping	visual.txt	/*Select-mode-mapping*
@@ -5025,6 +5038,7 @@ TERM	starting.txt	/*TERM*
 TOhtml-encoding	syntax.txt	/*TOhtml-encoding*
 TOhtml-encoding-detect	syntax.txt	/*TOhtml-encoding-detect*
 TOhtml-performance	syntax.txt	/*TOhtml-performance*
+TOhtml-progress-color	syntax.txt	/*TOhtml-progress-color*
 TOhtml-uncopyable-text	syntax.txt	/*TOhtml-uncopyable-text*
 TOhtml-wrap-text	syntax.txt	/*TOhtml-wrap-text*
 TRUE	eval.txt	/*TRUE*
@@ -5042,6 +5056,7 @@ Terminal-Job	terminal.txt	/*Terminal-Job*
 Terminal-Normal	terminal.txt	/*Terminal-Normal*
 Terminal-mode	terminal.txt	/*Terminal-mode*
 TerminalOpen	autocmd.txt	/*TerminalOpen*
+TerminalWinOpen	autocmd.txt	/*TerminalWinOpen*
 TextChanged	autocmd.txt	/*TextChanged*
 TextChangedI	autocmd.txt	/*TextChangedI*
 TextChangedP	autocmd.txt	/*TextChangedP*
@@ -5305,6 +5320,7 @@ arglist-quit	usr_07.txt	/*arglist-quit*
 arglistid()	eval.txt	/*arglistid()*
 argument-list	editing.txt	/*argument-list*
 argv()	eval.txt	/*argv()*
+argv-variable	eval.txt	/*argv-variable*
 as	motion.txt	/*as*
 asin()	eval.txt	/*asin()*
 asm.vim	syntax.txt	/*asm.vim*
@@ -5782,8 +5798,10 @@ compl-vim	insert.txt	/*compl-vim*
 compl-whole-line	insert.txt	/*compl-whole-line*
 complete()	eval.txt	/*complete()*
 complete-functions	insert.txt	/*complete-functions*
+complete-item-kind	insert.txt	/*complete-item-kind*
 complete-items	insert.txt	/*complete-items*
 complete-popup	insert.txt	/*complete-popup*
+complete-popuphidden	insert.txt	/*complete-popuphidden*
 complete_CTRL-E	insert.txt	/*complete_CTRL-E*
 complete_CTRL-Y	insert.txt	/*complete_CTRL-Y*
 complete_add()	eval.txt	/*complete_add()*
@@ -5943,6 +5961,7 @@ daB	motion.txt	/*daB*
 daW	motion.txt	/*daW*
 dab	motion.txt	/*dab*
 dap	motion.txt	/*dap*
+dart.vim	syntax.txt	/*dart.vim*
 das	motion.txt	/*das*
 date-functions	usr_41.txt	/*date-functions*
 dav	pi_netrw.txt	/*dav*
@@ -6394,6 +6413,7 @@ ft-csh-syntax	syntax.txt	/*ft-csh-syntax*
 ft-css-omni	insert.txt	/*ft-css-omni*
 ft-cweb-syntax	syntax.txt	/*ft-cweb-syntax*
 ft-cynlib-syntax	syntax.txt	/*ft-cynlib-syntax*
+ft-dart-syntax	syntax.txt	/*ft-dart-syntax*
 ft-dash-syntax	syntax.txt	/*ft-dash-syntax*
 ft-desktop-syntax	syntax.txt	/*ft-desktop-syntax*
 ft-dircolors-syntax	syntax.txt	/*ft-dircolors-syntax*
@@ -6423,6 +6443,7 @@ ft-ia64-syntax	syntax.txt	/*ft-ia64-syntax*
 ft-inform-syntax	syntax.txt	/*ft-inform-syntax*
 ft-java-syntax	syntax.txt	/*ft-java-syntax*
 ft-javascript-omni	insert.txt	/*ft-javascript-omni*
+ft-json-syntax	syntax.txt	/*ft-json-syntax*
 ft-ksh-syntax	syntax.txt	/*ft-ksh-syntax*
 ft-lace-syntax	syntax.txt	/*ft-lace-syntax*
 ft-lex-syntax	syntax.txt	/*ft-lex-syntax*
@@ -6628,6 +6649,7 @@ g:html_prevent_copy	syntax.txt	/*g:html_prevent_copy*
 g:html_start_line	syntax.txt	/*g:html_start_line*
 g:html_use_css	syntax.txt	/*g:html_use_css*
 g:html_use_encoding	syntax.txt	/*g:html_use_encoding*
+g:html_use_input_for_pc	syntax.txt	/*g:html_use_input_for_pc*
 g:html_use_xhtml	syntax.txt	/*g:html_use_xhtml*
 g:html_whole_filler	syntax.txt	/*g:html_whole_filler*
 g:netrw_altfile	pi_netrw.txt	/*g:netrw_altfile*
@@ -6800,6 +6822,7 @@ gF	editing.txt	/*gF*
 gH	visual.txt	/*gH*
 gI	insert.txt	/*gI*
 gJ	change.txt	/*gJ*
+gM	motion.txt	/*gM*
 gN	visual.txt	/*gN*
 gP	change.txt	/*gP*
 gQ	intro.txt	/*gQ*
@@ -6852,6 +6875,7 @@ getlatestvimscripts-install	pi_getscript.txt	/*getlatestvimscripts-install*
 getline()	eval.txt	/*getline()*
 getloclist()	eval.txt	/*getloclist()*
 getmatches()	eval.txt	/*getmatches()*
+getmousepos()	eval.txt	/*getmousepos()*
 getpid()	eval.txt	/*getpid()*
 getpos()	eval.txt	/*getpos()*
 getqflist()	eval.txt	/*getqflist()*
@@ -7085,6 +7109,8 @@ hl-Folded	syntax.txt	/*hl-Folded*
 hl-Ignore	syntax.txt	/*hl-Ignore*
 hl-IncSearch	syntax.txt	/*hl-IncSearch*
 hl-LineNr	syntax.txt	/*hl-LineNr*
+hl-LineNrAbove	syntax.txt	/*hl-LineNrAbove*
+hl-LineNrBelow	syntax.txt	/*hl-LineNrBelow*
 hl-MatchParen	syntax.txt	/*hl-MatchParen*
 hl-Menu	syntax.txt	/*hl-Menu*
 hl-ModeMsg	syntax.txt	/*hl-ModeMsg*
@@ -7109,6 +7135,7 @@ hl-StatusLine	syntax.txt	/*hl-StatusLine*
 hl-StatusLineNC	syntax.txt	/*hl-StatusLineNC*
 hl-StatusLineTerm	syntax.txt	/*hl-StatusLineTerm*
 hl-StatusLineTermNC	syntax.txt	/*hl-StatusLineTermNC*
+hl-TOhtmlProgress	syntax.txt	/*hl-TOhtmlProgress*
 hl-TabLine	syntax.txt	/*hl-TabLine*
 hl-TabLineFill	syntax.txt	/*hl-TabLineFill*
 hl-TabLineSel	syntax.txt	/*hl-TabLineSel*
@@ -7287,6 +7314,7 @@ if_ruby.txt	if_ruby.txt	/*if_ruby.txt*
 if_sniff.txt	if_sniff.txt	/*if_sniff.txt*
 if_tcl.txt	if_tcl.txt	/*if_tcl.txt*
 ignore-errors	eval.txt	/*ignore-errors*
+ignore-timestamp	editing.txt	/*ignore-timestamp*
 improved-autocmds-5.4	version5.txt	/*improved-autocmds-5.4*
 improved-quickfix	version5.txt	/*improved-quickfix*
 improved-sessions	version5.txt	/*improved-sessions*
@@ -7409,6 +7437,7 @@ join()	eval.txt	/*join()*
 js_decode()	eval.txt	/*js_decode()*
 js_encode()	eval.txt	/*js_encode()*
 jsbterm-mouse	options.txt	/*jsbterm-mouse*
+json.vim	syntax.txt	/*json.vim*
 json_decode()	eval.txt	/*json_decode()*
 json_encode()	eval.txt	/*json_encode()*
 jtags	tagsrch.txt	/*jtags*
@@ -7683,6 +7712,7 @@ modeless-selection	gui.txt	/*modeless-selection*
 modeline	options.txt	/*modeline*
 modeline-local	options.txt	/*modeline-local*
 modeline-version	options.txt	/*modeline-version*
+modifyOtherKeys	map.txt	/*modifyOtherKeys*
 moo.vim	syntax.txt	/*moo.vim*
 more-compatible	version5.txt	/*more-compatible*
 more-prompt	message.txt	/*more-prompt*
@@ -8078,7 +8108,6 @@ new-vimgrep	version7.txt	/*new-vimgrep*
 new-virtedit	version6.txt	/*new-virtedit*
 news	intro.txt	/*news*
 nextnonblank()	eval.txt	/*nextnonblank()*
-nice	todo.txt	/*nice*
 no-eval-feature	eval.txt	/*no-eval-feature*
 no-type-checking	eval.txt	/*no-type-checking*
 no_buffers_menu	gui.txt	/*no_buffers_menu*
@@ -8644,6 +8673,7 @@ scriptversion	eval.txt	/*scriptversion*
 scriptversion-1	eval.txt	/*scriptversion-1*
 scriptversion-2	eval.txt	/*scriptversion-2*
 scriptversion-3	eval.txt	/*scriptversion-3*
+scriptversion-4	eval.txt	/*scriptversion-4*
 scroll-binding	scroll.txt	/*scroll-binding*
 scroll-cursor	scroll.txt	/*scroll-cursor*
 scroll-down	scroll.txt	/*scroll-down*
@@ -8923,6 +8953,7 @@ starting.txt	starting.txt	/*starting.txt*
 startup	starting.txt	/*startup*
 startup-options	starting.txt	/*startup-options*
 startup-terminal	term.txt	/*startup-terminal*
+state()	eval.txt	/*state()*
 static-tag	tagsrch.txt	/*static-tag*
 status-line	windows.txt	/*status-line*
 statusmsg-variable	eval.txt	/*statusmsg-variable*
@@ -9093,6 +9124,8 @@ t_ST	term.txt	/*t_ST*
 t_Sb	term.txt	/*t_Sb*
 t_Sf	term.txt	/*t_Sf*
 t_Si	term.txt	/*t_Si*
+t_TE	term.txt	/*t_TE*
+t_TI	term.txt	/*t_TI*
 t_Te	term.txt	/*t_Te*
 t_Ts	term.txt	/*t_Ts*
 t_VS	term.txt	/*t_VS*
@@ -9333,6 +9366,7 @@ term_list()	terminal.txt	/*term_list()*
 term_scrape()	terminal.txt	/*term_scrape()*
 term_sendkeys()	terminal.txt	/*term_sendkeys()*
 term_setansicolors()	terminal.txt	/*term_setansicolors()*
+term_setapi()	terminal.txt	/*term_setapi()*
 term_setkill()	terminal.txt	/*term_setkill()*
 term_setrestore()	terminal.txt	/*term_setrestore()*
 term_setsize()	terminal.txt	/*term_setsize()*
@@ -9360,6 +9394,7 @@ termdebug_wide	terminal.txt	/*termdebug_wide*
 terminal	terminal.txt	/*terminal*
 terminal-api	terminal.txt	/*terminal-api*
 terminal-client-server	terminal.txt	/*terminal-client-server*
+terminal-close	terminal.txt	/*terminal-close*
 terminal-colors	os_unix.txt	/*terminal-colors*
 terminal-communication	terminal.txt	/*terminal-communication*
 terminal-cursor-style	terminal.txt	/*terminal-cursor-style*
@@ -9373,6 +9408,7 @@ terminal-functions	usr_41.txt	/*terminal-functions*
 terminal-info	term.txt	/*terminal-info*
 terminal-job-index	index.txt	/*terminal-job-index*
 terminal-key-codes	term.txt	/*terminal-key-codes*
+terminal-mouse	term.txt	/*terminal-mouse*
 terminal-ms-windows	terminal.txt	/*terminal-ms-windows*
 terminal-options	term.txt	/*terminal-options*
 terminal-output-codes	term.txt	/*terminal-output-codes*
@@ -9566,6 +9602,7 @@ utf-8-typing	mbyte.txt	/*utf-8-typing*
 utf8	mbyte.txt	/*utf8*
 v	visual.txt	/*v*
 v:	eval.txt	/*v:*
+v:argv	eval.txt	/*v:argv*
 v:beval_bufnr	eval.txt	/*v:beval_bufnr*
 v:beval_col	eval.txt	/*v:beval_col*
 v:beval_lnum	eval.txt	/*v:beval_lnum*
@@ -9968,6 +10005,7 @@ win_gotoid()	eval.txt	/*win_gotoid()*
 win_id2tabwin()	eval.txt	/*win_id2tabwin()*
 win_id2win()	eval.txt	/*win_id2win()*
 win_screenpos()	eval.txt	/*win_screenpos()*
+win_splitmove()	eval.txt	/*win_splitmove()*
 winbufnr()	eval.txt	/*winbufnr()*
 wincol()	eval.txt	/*wincol()*
 window	windows.txt	/*window*
@@ -10153,6 +10191,7 @@ zz	scroll.txt	/*zz*
 {move-around}	visual.txt	/*{move-around}*
 {offset}	pattern.txt	/*{offset}*
 {pat}	autocmd.txt	/*{pat}*
+{register}	change.txt	/*{register}*
 {rhs}	map.txt	/*{rhs}*
 {subject}	helphelp.txt	/*{subject}*
 {}	intro.txt	/*{}*

runtime/doc/tagsrch.txt

@@ -1,4 +1,4 @@
-*tagsrch.txt*   For Vim version 8.1.  Last change: 2019 Jun 10
+*tagsrch.txt*   For Vim version 8.1.  Last change: 2019 Nov 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -436,7 +436,7 @@ files here, it is only supported for backwards compatibility :-).
 
 Lines in Emacs tags files can be very long.  Vim only deals with lines of up
 to about 510 bytes.  To see whether lines are ignored set 'verbose' to 5 or
-higher.
+higher. Non-Emacs tags file lines can be any length.
 
 							*tags-option*
 The 'tags' option is a list of file names.  Each of these files is searched

runtime/doc/term.txt

@@ -1,4 +1,4 @@
-*term.txt*      For Vim version 8.1.  Last change: 2019 May 07
+*term.txt*      For Vim version 8.1.  Last change: 2019 Oct 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -80,14 +80,19 @@ can do this best in your .vimrc.  Example: >
 <
 						*raw-terminal-mode*
 For normal editing the terminal will be put into "raw" mode.  The strings
-defined with 't_ti' and 't_ks' will be sent to the terminal.  Normally this
-puts the terminal in a state where the termcap codes are valid and activates
-the cursor and function keys.  When Vim exits the terminal will be put back
-into the mode it was before Vim started.  The strings defined with 't_te' and
-'t_ke' will be sent to the terminal.  On the Amiga, with commands that execute
-an external command (e.g., "!!"), the terminal will be put into Normal mode
-for a moment.  This means that you can stop the output to the screen by
-hitting a printing key.  Output resumes when you hit <BS>.
+defined with 't_ti', 't_TI' and 't_ks' will be sent to the terminal.  Normally
+this puts the terminal in a state where the termcap codes are valid and
+activates the cursor and function keys.
+When Vim exits the terminal will be put back into the mode it was before Vim
+started.  The strings defined with 't_te', 't_TE' and 't_ke' will be sent to
+the terminal.  On the Amiga, with commands that execute an external command
+(e.g., "!!"), the terminal will be put into Normal mode for a moment.  This
+means that you can stop the output to the screen by hitting a printing key.
+Output resumes when you hit <BS>.
+
+Note: When 't_ti' is not empty, Vim assumes that it causes switching to the
+alternate screen.  This may slightly change what happens when executing a
+shell command or exiting Vim.  To avoid this use 't_TI' and 't_TE'.
 
 						*xterm-bracketed-paste*
 When the 't_BE' option is set then 't_BE' will be sent to the
@@ -297,8 +302,8 @@ OUTPUT CODES						*terminal-output-codes*
 	t_se	standout end					*t_se* *'t_se'*
 	t_so	standout mode					*t_so* *'t_so'*
 	t_sr	scroll reverse (backward)			*t_sr* *'t_sr'*
-	t_te	out of "termcap" mode				*t_te* *'t_te'*
-	t_ti	put terminal in "termcap" mode			*t_ti* *'t_ti'*
+	t_te	end of "termcap" mode				*t_te* *'t_te'*
+	t_ti	put terminal into "termcap" mode		*t_ti* *'t_ti'*
 	t_ts	set window title start (to status line)		*t_ts* *'t_ts'*
 	t_ue	underline end					*t_ue* *'t_ue'*
 	t_us	underline mode					*t_us* *'t_us'*
@@ -359,6 +364,8 @@ Added by Vim (there are no standard codes for these):
 	t_RT	restore window title from stack			*t_RT* *'t_RT'*
 	t_Si	save icon text to stack				*t_Si* *'t_Si'*
 	t_Ri	restore icon text from stack			*t_Ri* *'t_Ri'*
+	t_TE	end of "raw" mode				*t_TE* *'t_TE'*
+	t_TI	put terminal into "raw" mode 			*t_TI* *'t_TI'*
 
 Some codes have a start, middle and end part.  The start and end are defined
 by the termcap option, the middle part is text.
@@ -739,12 +746,21 @@ jump to tags).
 Whether the selection that is started with the mouse is in Visual mode or
 Select mode depends on whether "mouse" is included in the 'selectmode'
 option.
-
+							*terminal-mouse*
 In an xterm, with the currently active mode included in the 'mouse' option,
 normal mouse clicks are used by Vim, mouse clicks with the shift or ctrl key
 pressed go to the xterm.  With the currently active mode not included in
 'mouse' all mouse clicks go to the xterm.
 
+For terminals where it is not possible to have the mouse events be used by the
+terminal itself by using a modifier, a workaround is to not use mouse events
+for Vim in command-line mode: >
+	:set mouse=nvi
+Then to select text with the terminal, use ":" to go to command-line mode,
+select and copy the text to the system, then press Esc.
+
+Another way is to temporarily use ":sh" to run a shell, copy the text, then
+exit the shell.  'mouse' can remain set to "a" then.
 							*xterm-clipboard*
 In the Athena and Motif GUI versions, when running in a terminal and there is
 access to the X-server (DISPLAY is set), the copy and paste will behave like

runtime/doc/terminal.txt

@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 8.1.  Last change: 2019 Jul 04
+*terminal.txt*	For Vim version 8.1.  Last change: 2019 Nov 03
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -193,6 +193,7 @@ Command syntax ~
 			Supported [options] are:
 			++close		The terminal window will close
 					automatically when the job terminates.
+					|terminal-close|
 			++noclose	The terminal window will NOT close
 					automatically when the job terminates.
 			++open		When the job terminates and no window
@@ -209,6 +210,10 @@ Command syntax ~
 					no window will be used.
 			++norestore	Do not include this terminal window
 					in a session file.
+			++shell		Instead of executing {command}
+					directly, use a shell, like with
+					`:!command` 		*E279*
+					{only works on Unix currently}
 			++kill={how}	When trying to close the terminal
 					window kill the job with {how}.  See
 					|term_setkill()| for the values.
@@ -222,7 +227,7 @@ Command syntax ~
 					Vim width (no window left or right of
 					the terminal window) this value is
 					ignored.
-			++eof={text}	when using [range]: text to send after
+			++eof={text}	When using [range]: text to send after
 					the last line was written. Cannot
 					contain white space.  A CR is
 					appended.  For MS-Windows the default
@@ -234,6 +239,10 @@ Command syntax ~
 			++type={pty}	(MS-Windows only): Use {pty} as the
 					virtual console.  See 'termwintype'
 					for the values.
+			++api={expr}	Permit the function name starting with
+					{expr} to be called as |terminal-api|
+					function.  If {expr} is empty then no
+					function can be called.
 
 			If you want to use more options use the |term_start()|
 			function.
@@ -263,6 +272,12 @@ hidden, the job keeps running.  The `:buffer` command can be used to turn the
 current window into a terminal window.  If there are unsaved changes this
 fails, use ! to force, as usual.
 
+							*terminal-close*
+When the terminal window is closed, e.g. when the shell exits and "++close"
+argument was used, and this is the last normal Vim window, then Vim will exit.
+This is like using |:quit| in a normal window. Help and preview windows are
+not counted.
+
 To have a background job run without a window, and open the window when it's
 done, use options like this: >
 	:term ++hidden ++open make
@@ -479,6 +494,9 @@ term_dumpdiff({filename}, {filename} [, {options}])
 		Using the "s" key the top and bottom parts are swapped.  This
 		makes it easy to spot a difference.
 
+		Can also be used as a |method|: >
+			GetFilename()->term_dumpdiff(otherfile)
+<
 							*term_dumpload()*
 term_dumpload({filename} [, {options}])
 		Open a new window displaying the contents of {filename}
@@ -488,6 +506,9 @@ term_dumpload({filename} [, {options}])
 
 		For {options} see |term_dumpdiff()|.
 
+		Can also be used as a |method|: >
+			GetFilename()->term_dumpload()
+<
 							*term_dumpwrite()*
 term_dumpwrite({buf}, {filename} [, {options}])
 		Dump the contents of the terminal screen of {buf} in the file
@@ -502,11 +523,18 @@ term_dumpwrite({buf}, {filename} [, {options}])
 			"rows"		maximum number of rows to dump
 			"columns"	maximum number of columns to dump
 
+		Can also be used as a |method|, the base is used for the file
+		name: >
+			GetFilename()->term_dumpwrite(bufnr)
+
 term_getaltscreen({buf})				*term_getaltscreen()*
 		Returns 1 if the terminal of {buf} is using the alternate
 		screen.
 		{buf} is used as with |term_getsize()|.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_getaltscreen()
+
 
 term_getansicolors({buf})				*term_getansicolors()*
 		Get the ANSI color palette in use by terminal {buf}.
@@ -517,8 +545,12 @@ term_getansicolors({buf})				*term_getansicolors()*
 
 		{buf} is used as with |term_getsize()|.  If the buffer does not
 		exist or is not a terminal window, an empty list is returned.
-		{only available when compiled with the |+terminal| feature and
-		with GUI enabled and/or the |+termguicolors| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_getansicolors()
+
+<		{only available when compiled with GUI enabled and/or the
+		|+termguicolors| feature}
 
 term_getattr({attr}, {what})				*term_getattr()*
 		Given {attr}, a value returned by term_scrape() in the "attr"
@@ -528,7 +560,10 @@ term_getattr({attr}, {what})				*term_getattr()*
 			underline
 			strike
 			reverse
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetAttr()->term_getattr()
+
 
 term_getcursor({buf})					*term_getcursor()*
 		Get the cursor position of terminal {buf}. Returns a list with
@@ -550,13 +585,18 @@ term_getcursor({buf})					*term_getcursor()*
 		{buf} must be the buffer number of a terminal window. If the
 		buffer does not exist or is not a terminal window, an empty
 		list is returned.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_getcursor()
 
 term_getjob({buf})					*term_getjob()*
 		Get the Job associated with terminal window {buf}.
 		{buf} is used as with |term_getsize()|.
 		Returns |v:null| when there is no job.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_getjob()
+
 
 term_getline({buf}, {row})				*term_getline()*
 		Get a line of text from the terminal window of {buf}.
@@ -567,7 +607,10 @@ term_getline({buf}, {row})				*term_getline()*
 		returned.
 
 		To get attributes of each character use |term_scrape()|.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_getline(row)
+
 
 term_getscrolled({buf})					*term_getscrolled()*
 		Return the number of lines that scrolled to above the top of
@@ -579,7 +622,10 @@ term_getscrolled({buf})					*term_getscrolled()*
 <		(if that line exists).
 
 		{buf} is used as with |term_getsize()|.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_getscrolled()
+
 
 term_getsize({buf})					*term_getsize()*
 		Get the size of terminal {buf}. Returns a list with two
@@ -589,7 +635,10 @@ term_getsize({buf})					*term_getsize()*
 		{buf} must be the buffer number of a terminal window.  Use an
 		empty string for the current buffer.  If the buffer does not
 		exist or is not a terminal window, an empty list is returned.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_getsize()
+
 
 term_getstatus({buf})					*term_getstatus()*
 		Get the status of terminal {buf}. This returns a comma
@@ -602,7 +651,10 @@ term_getstatus({buf})					*term_getstatus()*
 		{buf} must be the buffer number of a terminal window. If the
 		buffer does not exist or is not a terminal window, an empty
 		string is returned.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_getstatus()
+
 
 term_gettitle({buf})					*term_gettitle()*
 		Get the title of terminal {buf}. This is the title that the
@@ -611,7 +663,10 @@ term_gettitle({buf})					*term_gettitle()*
 		{buf} must be the buffer number of a terminal window. If the
 		buffer does not exist or is not a terminal window, an empty
 		string is returned.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_gettitle()
+
 
 term_gettty({buf} [, {input}])				*term_gettty()*
 		Get the name of the controlling terminal associated with
@@ -620,12 +675,15 @@ term_gettty({buf} [, {input}])				*term_gettty()*
 		When {input} is omitted or 0, return the name for writing
 		(stdout). When {input} is 1 return the name for reading
 		(stdin). On UNIX, both return same name.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_gettty()
+
 
 term_list()						*term_list()*
 		Return a list with the buffer numbers of all buffers for
 		terminal windows.
-		{only available when compiled with the |+terminal| feature}
+
 
 term_scrape({buf}, {row})				*term_scrape()*
 		Get the contents of {row} of terminal screen of {buf}.
@@ -642,7 +700,10 @@ term_scrape({buf}, {row})				*term_scrape()*
 		    "attr"	attributes of the cell, use |term_getattr()|
 				to get the individual flags
 		    "width"	cell width: 1 or 2
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_scrape(row)
+
 
 term_sendkeys({buf}, {keys})				*term_sendkeys()*
 		Send keystrokes {keys} to terminal {buf}.
@@ -650,7 +711,19 @@ term_sendkeys({buf}, {keys})				*term_sendkeys()*
 
 		{keys} are translated as key sequences. For example, "\<c-x>"
 		means the character CTRL-X.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_sendkeys(keys)
+
+
+term_setapi({buf}, {expr})				*term_setapi()*
+		Set the function name prefix to be used for the |terminal-api|
+		function in terminal {buf}.  For example: >
+		    :call term_setapi(buf, "Myapi_")
+		    :call term_setapi(buf, "")
+<
+		The default is "Tapi_".  When {expr} is an empty string then
+		no |terminal-api| function can be used for {buf}.
 
 term_setansicolors({buf}, {colors})			*term_setansicolors()*
 		Set the ANSI color palette used by terminal {buf}.
@@ -680,8 +753,12 @@ term_setansicolors({buf}, {colors})			*term_setansicolors()*
 		'termguicolors' is set.  When not using GUI colors (GUI mode
 		or 'termguicolors'), the terminal window always uses the 16
 		ANSI colors of the underlying terminal.
-		{only available when compiled with the |+terminal| feature and
-		with GUI enabled and/or the |+termguicolors| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_setansicolors(colors)
+
+<		{only available with GUI enabled and/or the |+termguicolors|
+		feature}
 
 term_setkill({buf}, {how})				*term_setkill()*
 		When exiting Vim or trying to close the terminal window in
@@ -695,6 +772,10 @@ term_setkill({buf}, {how})				*term_setkill()*
 		After sending the signal Vim will wait for up to a second to
 		check that the job actually stopped.
 
+		Can also be used as a |method|: >
+			GetBufnr()->term_setkill(how)
+
+
 term_setrestore({buf}, {command})			*term_setrestore()*
 		Set the command to write in a session file to restore the job
 		in this terminal.  The line written in the session file is: >
@@ -703,7 +784,10 @@ term_setrestore({buf}, {command})			*term_setrestore()*
 
 		Use an empty {command} to run 'shell'.
 		Use "NONE" to not restore this window.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_setrestore(command)
+
 
 term_setsize({buf}, {rows}, {cols})		*term_setsize()* *E955*
 		Set the size of terminal {buf}. The size of the window
@@ -714,7 +798,10 @@ term_setsize({buf}, {rows}, {cols})		*term_setsize()* *E955*
 		{buf} must be the buffer number of a terminal window.  Use an
 		empty string for the current buffer.  If the buffer does not
 		exist or is not a terminal window, an error is given.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_setsize(rows, cols)
+
 
 term_start({cmd} [, {options}])			*term_start()*
 		Open a terminal window and run {cmd} in it.
@@ -780,15 +867,22 @@ term_start({cmd} [, {options}])			*term_start()*
 				     color modes.  See |g:terminal_ansi_colors|.
 		   "tty_type"	     (MS-Windows only): Specify which pty to
 				     use.  See 'termwintype' for the values.
+		   "term_api"	     function name prefix for the
+				     |terminal-api| function.  See
+				     |term_setapi()|.
+
+		Can also be used as a |method|: >
+			GetCommand()->term_start()
 
-		{only available when compiled with the |+terminal| feature}
 
 term_wait({buf} [, {time}])					*term_wait()*
 		Wait for pending updates of {buf} to be handled.
 		{buf} is used as with |term_getsize()|.
 		{time} is how long to wait for updates to arrive in msec.  If
 		not set then 10 msec will be used.
-		{only available when compiled with the |+terminal| feature}
+
+		Can also be used as a |method|: >
+			GetBufnr()->term_wait()
 
 ==============================================================================
 3. Terminal communication			 *terminal-communication*
@@ -833,9 +927,9 @@ Currently supported commands:
 		Call a user defined function with {argument}.
 		The function is called with two arguments: the buffer number
 		of the terminal and {argument}, the decoded JSON argument. 
-		The function name must start with "Tapi_" to avoid
+		By default, the function name must start with "Tapi_" to avoid
 		accidentally calling a function not meant to be used for the
-		terminal API.
+		terminal API.  This can be changed with |term_setapi()|.
 		The user function should sanity check the argument.
 		The function can use |term_sendkeys()| to send back a reply.
 		Example in JSON: >
@@ -1083,8 +1177,12 @@ Example session ~
 							*termdebug-example*
 Start in the Vim "src" directory and build Vim: >
 	% make
+Make sure that debug symbols are present, usually that means that $CFLAGS
+includes "-g".
+
 Start Vim: >
 	% ./vim
+
 Load the termdebug plugin and start debugging Vim: >
 	:packadd termdebug
 	:Termdebug vim
@@ -1156,8 +1254,10 @@ gdb:
  `:Run` [args]	    run the program with [args] or the previous arguments
  `:Arguments` {args}  set arguments for the next `:Run`
 
- *:Break*	set a breakpoint at the current line; a sign will be displayed
- *:Clear*	delete the breakpoint at the current line
+ *:Break*	set a breakpoint at the cursor position
+ :Break {position}
+		set a breakpoint at the specified position
+ *:Clear*	delete the breakpoint at the cursor position
 
  *:Step*	execute the gdb "step" command
  *:Over*	execute the gdb "next" command (`:Next` is a Vim command)

runtime/doc/testing.txt

@@ -1,4 +1,4 @@
-*testing.txt*	For Vim version 8.1.  Last change: 2019 Aug 21
+*testing.txt*	For Vim version 8.1.  Last change: 2019 Sep 08
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -44,6 +44,8 @@ test_alloc_fail({id}, {countdown}, {repeat})		*test_alloc_fail()*
 		let memory allocation fail {repeat} times.  When {repeat} is
 		smaller than one it fails one time.
 
+		Can also be used as a |method|: >
+			GetAllocId()->test_alloc_fail()
 
 test_autochdir()					*test_autochdir()*
 		Set a flag to enable the effect of 'autochdir' before Vim
@@ -55,6 +57,8 @@ test_feedinput({string})				*test_feedinput()*
 		were typed by the user. This uses a low level input buffer.
 		This function works only when with |+unix| or GUI is running.
 
+		Can also be used as a |method|: >
+			GetText()->test_feedinput()
 
 test_garbagecollect_now()			 *test_garbagecollect_now()*
 		Like garbagecollect(), but executed right away.  This must
@@ -73,6 +77,8 @@ test_getvalue({name})					*test_getvalue()*
 		{name} are supported:
 			need_fileinfo
 
+		Can also be used as a |method|: >
+			GetName()->test_getvalue()
 
 test_ignore_error({expr})			 *test_ignore_error()*
 		Ignore any error containing {expr}.  A normal message is given
@@ -84,6 +90,8 @@ test_ignore_error({expr})			 *test_ignore_error()*
 		When the {expr} is the string "RESET" then the list of ignored
 		errors is made empty.
 
+		Can also be used as a |method|: >
+			GetErrorText()->test_ignore_error()
 
 test_null_blob()					*test_null_blob()*
 		Return a |Blob| that is null. Only useful for testing.
@@ -124,6 +132,9 @@ test_option_not_set({name})				*test_option_not_set()*
 		even though the value is "double".
 		Only to be used for testing!
 
+		Can also be used as a |method|: >
+			GetOptionName()->test_option_not_set()
+
 
 test_override({name}, {val})				*test_override()*
 		Overrides certain parts of Vim's internal processing to be able
@@ -155,12 +166,17 @@ test_override({name}, {val})				*test_override()*
 <		The value of "starting" is saved.  It is restored by: >
 			call test_override('starting', 0)
 
+<		Can also be used as a |method|: >
+			GetOverrideVal()-> test_override('starting')
 
 test_refcount({expr})					*test_refcount()*
 		Return the reference count of {expr}.  When {expr} is of a
 		type that does not have a reference count, returns -1.  Only
 		to be used for testing.
 
+		Can also be used as a |method|: >
+			GetVarname()->test_refcount()
+
 
 test_scrollbar({which}, {value}, {dragging})		*test_scrollbar()*
 		Pretend using scrollbar {which} to move it to position
@@ -179,6 +195,8 @@ test_scrollbar({which}, {value}, {dragging})		*test_scrollbar()*
 		Only works when the {which} scrollbar actually exists,
 		obviously only when using the GUI.
 
+		Can also be used as a |method|: >
+			GetValue()->test_scrollbar('right', 0)
 
 test_setmouse({row}, {col})				*test_setmouse()*
 		Set the mouse position to be used for the next mouse action.
@@ -197,6 +215,9 @@ test_settime({expr})					*test_settime()*
 		{expr} must evaluate to a number.  When the value is zero the
 		normal behavior is restored.
 
+		Can also be used as a |method|: >
+			GetTime()->test_settime()
+
 ==============================================================================
 3. Assert functions				*assert-functions-details*
 

runtime/doc/textprop.txt

@@ -1,4 +1,4 @@
-*textprop.txt*  For Vim version 8.1.  Last change: 2019 Sep 04
+*textprop.txt*  For Vim version 8.1.  Last change: 2019 Nov 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -6,13 +6,6 @@
 
 Displaying text with properties attached.	*textprop* *text-properties*
 
-THIS IS UNDER DEVELOPMENT - ANYTHING MAY STILL CHANGE  *E967*
-
-What is not working yet:
-- Adjusting column/length when inserting text
-- Text properties spanning more than one line
-- prop_find()
-
 
 1. Introduction			|text-prop-intro|
 2. Functions			|text-prop-functions|
@@ -55,8 +48,8 @@ Property Types ~
 A text property normally has the name of a property type, which defines 
 how to highlight the text.  The property type can have these entries:
 	"highlight"	name of the highlight group to use
-	"combine"	when TRUE the text property highlighting is combined
-			with any syntax highlighting, when omitted or FALSE the
+	"combine"	when omitted or TRUE the text property highlighting is
+			combined with any syntax highlighting; when FALSE the
 			text property highlighting replaces the syntax
 			highlighting
 	"priority"	when properties overlap, the one with the highest
@@ -94,6 +87,12 @@ and/or ends with a specific character, such as the quote surrounding a string.
 Nevertheless, when text is inserted or deleted the text may need to be parsed
 and the text properties updated.  But this can be done asynchronously.
 
+
+Internal error *E967*
+
+If you see E967, please report the bug.  You can do this at Github:
+https://github.com/vim/vim/issues/new
+
 ==============================================================================
 2. Functions						*text-prop-functions*
 

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.1.  Last change: 2019 Sep 07
+*todo.txt*      For Vim version 8.1.  Last change: 2019 Nov 19
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -38,11 +38,14 @@ browser use: https://github.com/vim/vim/issues/1234
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
+Patch 2314 for vi' causes a new problem.  #5247
+
+Patch from Namsh to allow building with both XIM and hangulin. (2019 Aug 29)
+
+
 Popup windows:
+- Use popup (or popup menu) for command line completion
 - Implement flip option
-- Why does 'nrformats' leak from the popup window buffer???
-  Happens in Test_simple_popup() at the second screendump.
-- For the "moved" property also include mouse movement?
 - Make redrawing more efficient and avoid flicker:
     - put popup menu also in popup_mask?
 - Any other commands to disable in a popup window?
@@ -53,11 +56,14 @@ Popup windows:
 - When drawing on top half a double-wide character, display ">" or "<" in the
   incomplete cell.
 
-Text properties: See comment at top of src/textprop.c.
+Text properties:
+- Implement prop_find() issue #4970
+- Text properties spanning more than one line
+- See remarks at top of src/textprop.c
 
-'incsearch' with :s: (#3321)
+'incsearch' with :s: 
 - Get E20 when using command history to get "'<,'>s/a/b" and no Visual area
-  was set. (#3837)
+  was set. (issue #3837)
 - :s/foo  using CTRL-G moves to another line, should not happen, or use the
   correct line (it uses the last but one line) (Lifepillar, Aug 18, #3345)
 - :s@pat/tern@ doesn't include "/" in the pattern. (Takahiro Yoshihara, #3637)
@@ -69,7 +75,7 @@ Text properties: See comment at top of src/textprop.c.
   Then :%s?foo should take the first match above the cursor line.
 
 Prompt buffer:
-- Add a command line history.
+- Add a command line history, using up/down keys.  issue #5010
 - delay next prompt until plugin gives OK?
 - add prompt_addtext({buf}, {expr})	none	add text to a prompt buffer
 
@@ -82,15 +88,13 @@ Terminal debugger:
 - Termdebug does not work when Vim was build with mzscheme: gdb hangs just
   after "run".  Everything else works, including communication channel.  Not
   initializing mzscheme avoid the problem, thus it's not some #ifdef.
-- Add support for lldb?  #3565
+- Add support for lldb?  issue #3565
 - Could we do something similar for debugging Vim scripts?  At least see the
   script while stepping through it.  Simple version would use an extra window.
   More complete solution would actually run Vim in a Terminal and control it
   with another Vim instance.
 
 Terminal emulator window:
-- When typing "exit" in a terminal window with a shell and it's the only
-  window, should exit Vim instead of editing another buffer. (#4539)
 - When the job in the terminal doesn't use mouse events, let the scroll wheel
   scroll the scrollback, like a terminal does at the shell prompt. #2490
   And use modeless selection.  #2962
@@ -98,13 +102,10 @@ Terminal emulator window:
   be redrawn.
 - GUI: When using ":set go+=!" a system() call causes the hit-enter prompt.
   (#3327)
-- Terminal API: Add more functionality? (Ozaki Kiichi 2018 May 13, #2907)
 - GUI: hang until key typed. (#3530)
 - Allow for specifying the directory, with ++cwd={dir}.
 - With a vertical split only one window is updated. (Linwei, 2018 Jun 2,
   #2977)
-- Add a way to make ":term cmd" run "cmd" in a shell, instead of executing it
-  directly.  Perhaps ":term ++shell cmd". (#3340)
 - When pasting should call vterm_keyboard_start_paste(), e.g. when using
   K_MIDDLEMOUSE, calling insert_reg().
 - Users expect parsing the :term argument like a shell does, also support
@@ -124,26 +125,35 @@ Terminal emulator window:
   conversions.
 
 Error numbers available:
-E278, E279, E290, E292, E362, E366, E450, E451, E452,
+E290, E292, E362, E366, E450, E451, E452,
 E453, E454, E460, E489, E491, E565, E578, E610, E611, E653,
 E654, E856, E857, E860, E861, E863, E889, E900
 
+Running test_gui and test_gui_init with Motif sometimes kills the window
+manager.  Problem with Motif? Now test_gui crashes in submenu_change().
+Athena is OK.
+Motif: Build on Ubuntu can't enter any text in dialog text fields.
+
+Patch to properly break CJK lines: Anton Kochkov, #3875
+Flag in 'formatoptions' is not used in the tests.
+
 Remove check for cmd_silent when calling search_stat()? (Gary Johnson)
 
 undo result wrong: Masato Nishihata, #4798
 
+Undo puts cursor in wrong line after "cG<Esc>" undo.
+
 Sound: support on Mac?  Or does libcanberra work there?
 
-Patch to add win_splitmove() function. (Andy Massimino, #4561)
-
-Patch for #4733: #4734.  Test needs improvements.
-
-Add CmdwinLeavePost (#4762).  Also add WinLeavePost then?
+Patch to user manual: #5098.  Comments by DC Slagel:
+- semicolon use should be OK.
+- Keep capital after colon.
 
 Patch to fix session file when using multiple tabs. (Jason Franklin, 2019 May
 20)
 Also put :argadd commands at the start for all buffers, so that their order
 remains equal?  Then %argdel to clean it up.  Do try this with 'hidden' set.
+Also #4994: window-local options not always restored, related to using :badd.
 
 Completion mixes results from the current buffer with tags and other files.
 Happens when typing CTRL-N while still search for results.  E.g., type "b_" in
@@ -151,49 +161,55 @@ terminal.c and then CTRL-N twice.
 Should do current file first and not split it up when more results are found.
 (Also #1890)
 
-Patch to use timers in matchparen. (Daniel Hahler, #1338)
-Ready to include now?
-
 Adding "10" to 'spellsuggest' causes spell suggestions to become very slow.
 (#4087)
 
-Patch to support 'cursorlineopt' - only highlight the line number of the
-cursor line: #4693
-
-Let plugins know how much space is available in the last line before
-triggering the hit-enter prompt.  Internally called "sc_col".
-(Daniel Hahler, #4732)
-
-Patch for Template string: #4491  Not ready yet.  New pull: #4634
+":helptags ALL" should skip directories where "tags" cannot be written.
+(Matěj Cepl, #5026)
 
 ":bnext" in a help buffer is supposed to go to the next help buffer, but it
 goes to any buffer, and then :bnext skips help buffers, since they are
 unlisted. (#4478)
 
-Patch to fix using zero sc_sid. (#4877)
+Enable 'termbidi' if $VTE_VERSION >= 5703 ?
 
-Make 'showbreak' global-local.
+Universal solution to detect if t_RS is working, using cursor position.
+Koichi Iwamoto, #2126
 
 The :syntax cchar value can only be a single character.  It would be useful to
 support combining characters. (Charles Campbell)  Also #4687
 
+Include Haiku port. (Adrien Destugues, Siarzhuk Zharski, 2013 Oct 24)
+It can replace the BeOS code, which is likely not used anymore.
+Now on github: #1856.  Updated Oct 2017
+Got permission to include this under the Vim license.
+
+Result of synID() sometimes wrong in help files. (#5252)
+
 Problem showing a line if the number column width changes when using "o".
 (Mateusz Morusiewicz, #4245)
 
 When using :packadd for a replacement language plugin, it is loaded after the
 default one.  #4698
 
-Patch from Namsh to allow building with both XIM and hangulin. (2019 Aug 29)
-
 When using :packadd files under "later" are not used, which is inconsistent
 with packages under "start". (xtal8, #1994)
 
 Modeless selection doesn't work in gvim. (#4783)
 Caused by patch 8.1.1534.
 
+Patch to add random number generator. (Hong Xu, 2010 Nov 8, update Nov 10)
+Alternative from Christian Brabandt. (2010 Sep 19)
+New one from Yasuhiro Matsumoto, #1277.
+
 Visual highlight not removed when 'dipslay' is "lastline" and line doesn't
 fit. (Kevin Lawler, #4457)
 
+Patch to add interrupt(). (Yasuhiro Matsumoto, #2834)
+
+Patch to add per-tabpage and per-window previous directory: "lcd -" and "tcd
+-". (Yegappan Lakshmanan, #4362)
+
 Does not build with MinGW out of the box:
 - _stat64 is not defined, need to use "struct stat" in vim.h
 - WINVER conflict, should use 0x0600 by default?
@@ -201,11 +217,48 @@ Does not build with MinGW out of the box:
 Crash when mixing matchadd and substitute()? (Max Christian Pohle, 2018 May
 13, #2910)  Can't reproduce?
 
+Patch to configure BUILD_DATE for reproducible builds. (James McCoy, #513)
+
+Patch to add MODIFIED_BY to MSVC build file. (Chen Lei, 2016 Nov 24, #1275)
+
+xterm should be able to pass focus changes to Vim, so that Vim can check for
+buffers that changed.  Perhaps in misc.c, function selectwindow().
+Xterm 224 supports it!
+Patch to make FocusGained and FocusLost work in modern terminals. (Hayaki
+Saito, 2013 Apr 24) Update 2016 Aug 12.
+Also see issue #609.
+We could add the enable/disable sequences to t_ti/t_te or t_ks/t_ke.
+
 Check_external_diff() is used too often. (Daniel Hahler, #4800)
 
+Win32: after "[I" showing matches, scroll wheel messes up screen. (Tsakiridis,
+2007 Feb 18)
+Patch by Alex Dobrynin, 2007 Jun 3.  Also fixes other scroll wheel problems.
+
+Add a WindowScrolled event.  Trigger around the same time as CursorMoved.
+Can be used to update highlighting. #3127  #5181
+
+Patch for Template string: #4491.  New pull: #4634
+Have another look at the implementation: Is the code worth it?
+
+Incorrect formatting with autoindent. (Sebastian Gniazdowski, #4909)
+
+Patch to add the :bvimgrep command.  (Christian Brabandt, 2014 Nov 12)
+Updated 2016 Jun 10, #858  Update 2017 Mar 28: use <buffer>
+
 Errors found with random data:
     heap-buffer-overflow in alist_add (#2472)
 
+Patch to support CamelCase for spell checking: See a lower-to-upper case
+change as a word boundary. (btucker-MPCData, 2016 Nov 6, #1235)
+patch for 'spellcamelcase' option: spellcheck each CamelCased word.
+(Ben Tucker, 2016 Dec 2)
+
+Patch to add {skip} argument to search(). (Christian Brabandt, 2016 Feb 24)
+Update 2016 Jun 10, #861
+
+Patch to add "cmdline" completion to getcompletion(). (Shougo, Oct 1, #1140)
+
 Improve fallback for menu translations, to avoid having to create lots of
 files that source the actual file.  E.g. menu_da_de -> menu_da
 Include part of #3242?
@@ -213,7 +266,21 @@ Include part of #3242?
 When a terminal exit_cb closes the window, a following typed key is lost, if
 it's in a mapping. (2018 Oct 6, #2302, #3522)
 
-Patch for Inno Setup: #2739
+Patch to have text objects defined by arbitrary single characters. (Daniel
+Thau, 2013 Nov 20, 2014 Jan 29, 2014 Jan 31)
+Added tests (James McCoy, 2016 Aug 3, #958).  Still needs more work.
+
+Patch for multi-byte characters in langmap and applying a mapping on them.
+(Christian Brabandt, 2015 Jun 12, update July 25)
+Is this the right solution?  Need to cleanup langmap behavior:
+- in vgetorpeek() apply langmap to the typeahead buffer and put the result in
+  a copy-buffer, only when langmap is appropriate for the current mode. Then
+  check for mapping and let gotchars() work on the copy-buffer.
+- Remove LANGMAP_ADJUST() in other parts of the code.  Make sure the mode is
+  covered by the above change.
+So that replaying the register doesn't use keymap/langmap and still does the
+same thing.  Remarks on PR #543 (Roland Puntaier).
+Also see #737: langmap not applied to replaying recording.
 
 Would be nice to set tab-local values for 'diffexpr' and 'diffopt'.  Use
 t:diffexpr_option t:diffopt_option? (#4782)
@@ -226,19 +293,35 @@ Williams, 2018 Oct 30)
 "exepath('bin/cmd')" does not work while ":!bin/cmd" does work.
 (Daniel Hahler, #4710)  and executable('bin/cmd') returns 1
 
+Error drawing the number column when 'cursorline' is set. (#3893)
+
 Problem with :tlmenu: Detach item added with all modes?  Issue #3563.
 
+Add an argument to expandcmd() to expand like ":next" does.
+
+When both "a" and "l" is in 'formatoptions' then auto-formatting also happens
+in a long line. #5189
+
 The quoting of the [command] argument of :terminal is not clearly documented.
 Give a few examples. (#4288)
 
 Opening a file with --remote-tab-silent that matches 'wildignore' does not
 work, results in (E479: No match". (#4610)
 
+Patch for this (Tristan Konolige, #1011, only adds the option, no implem.):
+7   Add an option to add one pixel column to the character width?  Lucida
+    Console italic is wider than the normal font ("d" overlaps with next char).
+    Opposite of 'linespace': 'columnspace'.
+
 Bug: script written with "-W scriptout" contains Key codes, while the script
 read with "-s scriptin" expects escape codes.  Probably "scriptout" needs to
 be adjusted. (Daniel Steinberg, 2019 Feb 24, #4041)
 
-":registers" should indicate char/block/linewise.  (Ayberk Aydin, #4546)
+Add a string to the 'display' option ("smoothscroll" ?) to make CTRL-E and
+CTRL-Y scroll one screen line, also if this means the first line doesn't start
+with the first character (like what happens with a last line that doesn't
+fit).  Display "<<<" at the start of the first visible line (like "@@@" is
+displayed in the last line). (Arseny Nasokin,  #5154)
 
 Patch for ambiguous width characters in libvterm on MS-Windows 10.
 (Nobuhiro Takasaki, #4411)
@@ -311,6 +394,9 @@ Support setting the character displayed below the last line?  Neovim uses
 Check: __attribute__((format(printf, on semsg() and siemsg().  Where was this
 added?
 
+Patch to add a flatten() function.  #3676.  Check that the doc explains the
+maxdepth argument (applies to the input "recursiveness").
+
 Add test for urxvt mouse codes.  Also test that mouse coordinates can be
 negative. (see #4326)
 
@@ -346,11 +432,6 @@ Not existing directory in CDPATH leads to two shell calls. (#4525)
 Use dict_iterate_start() / dict_iterate_next() instead of relying on the
 internals of the dict structure.
 
-Running test_gui and test_gui_init with Motif sometimes kills the window
-manager.  Problem with Motif? Now test_gui crashes in submenu_change().
-Athena is OK.
-Motif: Build on Ubuntu can't enter any text in dialog text fields.
-
 nvo-mode mapping works on Windows, not on Linux. (#3678)
 
 Missing tests for:
@@ -360,9 +441,6 @@ Redo only remembers the last change.  Could use "{count}g." to redo an older
 change.  How does the user know which change?  At least have a way to list
 them: ":repeats".  Add to history, like search history and command line history.
 
-When using exclusive selection and vi" that fails, cursor moves to the left.
-Cursor should not move. (#4024)
-
 Incsearch test fails when locale is "C". (Dominique Pelle, #3986)
 Also run all tests with C locale?
 
@@ -502,9 +580,6 @@ Further xdiff changes:
 
 Difference between two regexp engines: #3373
 
-Patch to properly break CJK lines: #3875
-Requires more tests.  dbcs_ functions are not implemented.
-
 Patch to add ch_listen() (Yasuhiro Matsumoto, 2018 Nov 26, #3639)
 What is the practical use for this?
 
@@ -512,7 +587,7 @@ When the last line wraps, selecting with the mouse below that line only
 includes the first screen line. (2018 Aug 23, #3368)
 
 Refactored HTML indent file. (Michael Lee, #1821)
-Ask to write a test first.
+Asked to write a test.
 
 MS-Windows: .lnk file not resolved properly when 'encoding' is set.
 (lkintact, 2018 Sep 22, #3473)
@@ -521,6 +596,9 @@ Merge checking for 'cursorline' and 'concealcursor', see neovim #9492.
 
 Display error when a conceal match uses '\%>1l'. (#4854)
 
+Add a windowID argument to placing a sign, so that it only shows up in one
+window for the buffer.
+
 Request to add sign_setlist() to make it faster to add a lot of signs, e.g.
 when adding a sign for every quickfix entry. (#4557)
 
@@ -586,9 +664,6 @@ used for git temp files.
 
 Cursor in wrong position when line wraps. (#2540)
 
-Patch to parse ":line" in tags file and use it for search. (Daniel Hahler,
-#2546)  Fixes #1057.  Missing a test.
-
 Setting 'columns' in a BufEnter autocommand causes a second tab width to
 behave strangely, as if there is a gap and a vertical window separator.
 (Michael Soyka, 2018 Sep 23, #3477)
@@ -599,9 +674,6 @@ pass an expression to evaluate.  Allow passing zero for "never skip".
 Add an option similar to 'lazyredraw' to skip redrawing while executing a
 script or function.
 
-Universal solution to detect if t_RS is working, using cursor position.
-Koichi Iwamoto, #2126
-
 When using a menu item while the "more" prompt is displayed doesn't work well.
 E.g. after using help->version.  Have a key that ends the "more" prompt and
 does nothing otherwise?
@@ -772,7 +844,7 @@ Problem with 'delcombine'. (agguser, 2017 Nov 10, #2313)
 MS-Windows: buffer completion doesn't work when using backslash (or slash)
 for a path separator. (xtal8, #2201)
 
-Would be nice for insert mode completion to highlight the text that was added
+Would be nice for Insert mode completion to highlight the text that was added
 (and may change when picking another completion).
 
 Test runtime files.
@@ -795,15 +867,8 @@ The ":move" command does not honor closed folds. (Ryan Lue, #2351)
 Patch to fix increment/decrement not working properly when 'virtualedit' is
 set. (Hirohito Higashi, 2016 Aug 1, #923)
 
-Patch to make gM move to middle of line. (Yasuhiro Matsumoto, Sep 8, #2070)
-
 Cannot copy modeless selection when cursor is inside it. (lkintact, #2300)
 
-Include Haiku port. (Adrien Destugues, Siarzhuk Zharski, 2013 Oct 24)
-It can replace the BeOS code, which is likely not used anymore.
-Now on github: #1856.  Updated Oct 2017
-Got permission to include this under the Vim license.
-
 Test_writefile_fails_conversion failure on Solaris because if different iconv
 behavior.  Skip when "uname" returns "SunOS"? (Pavel Heimlich, #1872)
 
@@ -900,8 +965,6 @@ Memory leak in test97?  The string is actually freed.  Weird.
 assert_fails() can only check for the first error.  Make it possible to have
 it catch multiple errors and check all of them.
 
-New value "uselast" for 'switchbuf'. (Lemonboy, 2017 Apr 23, #1652)
-
 Add a toolbar in the terminal.  Can be global, above all windows, or specific
 for one window.
 
@@ -989,10 +1052,6 @@ somewhere else.  :{range}copy {dest} !cmd
 Patch to fix that empty first tab is not in session.
 (Hirohito Higashi, 2016 Nov 25, #1282)
 
-Patch to add random number generator. (Hong Xu, 2010 Nov 8, update Nov 10)
-Alternative from Christian Brabandt. (2010 Sep 19)
-New one from Yasuhiro Matsumoto, #1277.
-
 Patch to fix escaping of job arguments. (Yasuhiro Matsumoto, 2016 Oct 5)
 Update Oct 14: https://gist.github.com/mattn/d47e7d3bfe5ade4be86062b565a4bfca
 Update Aug 2017: #1954
@@ -1048,10 +1107,6 @@ Patch to make it possible to extend a list with itself.
 
 Patch to add Zstandard compressed file support. (Nick Terrell, 2016 Oct 24)
 
-Patch to add MODIFIED_BY to MSVC build file. (Chen Lei, 2016 Nov 24, #1275)
-
-Patch to change argument of :marks. (LemonBoy, 2017 Jan 29, #1426)
-
 On Windows buffer completion sees backslash as escape char instead of path
 separator. (Toffanim, 2016 Nov 24, #1274)
 
@@ -1072,6 +1127,9 @@ sort() is not stable when using numeric/float sort (Nikolay Pavlov, 2016 Sep
 
 +channel:
 - Add a in_cb, invoked when the write buffer has become empty. (Matteo Landi)
+- Add ch_readlines(): for a channel in NL mode, reads as many lines as are
+  available.  Should be more efficient than looping over ch_read() with
+  ch_status() to check for more.
 - Add a separate timeout for opening a socket.  Currently it's fixed at 50
   msec, which is too small for a remote connection. (tverniquet, #2130)
 - Problem with stderr on Windows? (Vincent Rischmann, 2016 Aug 31, #1026)
@@ -1151,8 +1209,6 @@ Regexp problems:
   Another one: echom matchstr(" sdfsfsf\n sfdsdfsdf",'[^\n]*')
   (2017 May 15, #1252)
 
-Patch to add "cmdline" completion to getcompletion(). (Shougo, Oct 1, #1140)
-
 Feature request: Complete members of a dictionary. (Luc Hermitte, 2017 Jan 4,
 #1350)
 
@@ -1168,11 +1224,6 @@ Include the test.
 When 'keywordprg' starts with ":" the argument is still escaped as a shell
 command argument. (Romain Lafourcade, 2016 Oct 16, #1175)
 
-Patch to support CamelCase for spell checking: See a lower-to-upper case
-change as a word boundary. (btucker-MPCData, 2016 Nov 6, #1235)
-patch for 'spellcamelcase' option: spellcheck each CamelCased word.
-(Ben Tucker, 2016 Dec 2)
-
 Idea from Sven: record sequence of keys.  Useful to show others what they are
 doing (look over the shoulder), and also to see what happened.
 Probably list of keystrokes, with some annotations for mode changes.
@@ -1255,9 +1306,6 @@ Reject the value? #710.
 When doing "vi buf.md" a BufNew autocommand for *.md is not triggered.
 Because of using the initial buffer? (Dun Peal, 2016 May 12)
 
-Patch to add the :bvimgrep command.  (Christian Brabandt, 2014 Nov 12)
-Updated 2016 Jun 10, #858  Update 2017 Mar 28: use <buffer>
-
 Add redrawtabline command. (Naruhiko Nishino, 2016 Jun 11)
 
 Neovim patch for utfc_ptr2char_len() https://github.com/neovim/neovim/pull/4574
@@ -1319,10 +1367,6 @@ Also need to run update-desktop-database (Kuriyama Kazunobu, 2015 Nov 4)
 Test object i{ and it do not behave the same. #1379
 Do not include the linebreak at the start?
 
-Patch to have text objects defined by arbitrary single characters. (Daniel
-Thau, 2013 Nov 20, 2014 Jan 29, 2014 Jan 31)
-Added tests (James McCoy, 2016 Aug 3).  Still needs more work.
-
 Feature request: add the "al" text object, to manipulate a screen line.
 Especially useful when using 'linebreak'
 
@@ -1338,9 +1382,6 @@ If ":bd" also closes a Tab page then the " mark is not set.  (Harm te Hennepe,
 Patch to avoid redrawing tabline when the popup menu is visible.
 (Christian Brabandt, 2016 Jan 28)
 
-Patch to add {skip} argument to search(). (Christian Brabandt, 2016 Feb 24)
-Update 2016 Jun 10, #861
-
 Patch to show search statistics. (Christian Brabandt, 2016 Jul 22)
 
 When the CursorMovedI event triggers, and CTRL-X was typed, a script cannot
@@ -1459,18 +1500,6 @@ Patch to fix checking global option value when not using it.
 When 'showbreak' is set repeating a Visual operation counts the size of the
 'showbreak' text as part of the operation. (Axel Bender, 2015 Jul 20)
 
-Patch for multi-byte characters in langmap and applying a mapping on them.
-(Christian Brabandt, 2015 Jun 12, update July 25)
-Is this the right solution?  Need to cleanup langmap behavior:
-- in vgetorpeek() apply langmap to the typeahead buffer and put the result in
-  a copy-buffer, only when langmap is appropriate for the current mode. Then
-  check for mapping and let gotchars() work on the copy-buffer.
-- Remove LANGMAP_ADJUST() in other parts of the code.  Make sure the mode is
-  covered by the above change.
-So that replaying the register doesn't use keymap/langmap and still does the
-same thing.  Remarks on issue 543 (Roland Puntaier).
-Also see #737: langmap not applied to replaying recording.
-
 Patch to add grepfile(). (Scott Prager, 2015 May 26)
 Work in progress.
 
@@ -1579,14 +1608,6 @@ compatible with Vim spell files.  The old files can no longer be downloaded.
 Spell checking: Add a feature to only consider two spaces after a dot to start
 a new sentence.  Don't give the capitalization error when there is one space.
 
-xterm should be able to pass focus changes to Vim, so that Vim can check for
-buffers that changed.  Perhaps in misc.c, function selectwindow().
-Xterm 224 supports it!
-Patch to make FocusGained and FocusLost work in modern terminals. (Hayaki
-Saito, 2013 Apr 24) Update 2016 Aug 12.
-Also see issue #609.
-We could add the enable/disable sequences to t_ti/t_te or t_ks/t_ke.
-
 Idea: For a window in the middle (has window above and below it), use
 right-mouse-drag on the status line to move a window up/down without changing
 its height?  It's like dragging the status bar above it at the same time.
@@ -1887,9 +1908,6 @@ Syntax region with 'concealends' and a 'cchar' value, 'conceallevel' set to 2,
 only one of the two ends gets the cchar displayed. (Brett Stahlman, 2010 Aug
 21, Ben Fritz, 2010 Sep 14)
 
-'cursorline' works on a text line only.  Add 'cursorscreenline' for
-highlighting the screen line. (Christian Brabandt, 2012 Mar 31)
-
 Win32: Patch to use task dialogs when available. (Sergiu Dotenco, 2011 Sep 17)
 New feature, requires testing.  Made some remarks.
 
@@ -2133,10 +2151,6 @@ Looks like only bash can do it. (Yakov Lerner)
 Cscope "cs add" stopped working somewhat before 7.2.438. (Gary Johnson, 2010
 Jun 29)  Caused by 7.2.433?
 
-I often see pasted text (from Firefox, to Vim in xterm) appear twice.
-Also, Vim in xterm sometimes loses copy/paste ability (probably after running
-an external command).
-
 Jumplist doesn't work properly in Insert mode? (Jean Johner, 2010 Mar 20)
 
 Problem with transparent cmdline.  Also: Terminal title is wrong with
@@ -2699,10 +2713,6 @@ patches by Mathias, see mail Feb 22)
 Win32: compiling with normal features and OLE fails.  Patch by Mathias
 Michaelis, 2006 Jun 4.
 
-Win32: after "[I" showing matches, scroll wheel messes up screen. (Tsakiridis,
-2007 Feb 18)
-Patch by Alex Dobrynin, 2007 Jun 3.  Also fixes other scroll wheel problems.
-
 Win32: using CTRL-S in Insert mode doesn't remove the "+" from the tab pages
 label.  (Tsakiridis, 2007 Feb 18)  Patch from Ian Kelling, 2008 Aug 6.
 
@@ -2732,10 +2742,6 @@ If the variable "g:x#y#z" exists completion after ":echo g:x#" doesn't work.
 Feature request: Command to go to previous tab, like what CTRL-W p does for
 windows. (Adam George)
 
-F1 - F4 in an xterm produce a different escape sequence when used with a
-modifier key.  Need to catch three different sequences.  Use K_ZF1, like
-K_ZHOME? (Dickey, 2007 Dec 2)
-
 In debug mode, using CTRL-R = to evaluate a function causes stepping through
 the function. (Hari Krishna Dara, 2006 Jun 28)
 
@@ -2870,12 +2876,6 @@ Setting 'background' resets the Normal background color:
 This is undesired, 'background' is supposed to tell Vim what the background
 color is, not reset it.
 
-Linux distributions:
-- Suggest compiling xterm with --enable-tcap-query, so that nr of colors is
-  known to Vim.  88 colors instead of 16 works better.  See ":help
-  xfree-xterm".
-- Suggest including bare "vi" and "vim" with X11, syntax, etc.
-
 Completion menu: For a wrapping line, completing a long file name, only the
 start of the path is shown in the menu.  Should move the menu to the right to
 show more text of the completions.  Shorten the items that don't fit in the
@@ -2890,12 +2890,6 @@ the buffer is displayed. (Antonios Tsakiridis)
 When ":cn" moves to an error in the same line the message isn't shortened.
 Only skip shortening for ":cc"?
 
-Write "making vim work better" for the docs (mostly pointers): *nice*
-    - sourcing $VIMRUNTIME/vimrc_example.vim
-    - setting 'mouse' to "a"
-    - getting colors in xterm
-    - compiling Vim with X11, GUI, etc.
-
 Problem with ":call" and dictionary function. Hari Krishna Dara, Charles
 Campbell 2006 Jul 06.
 
@@ -2989,11 +2983,6 @@ When 'encoding' is utf-8 typing text at the end of the line causes previously
 typed characters to be redrawn.  Caused by patch 7.1.329. (Tyler Spivey, 2008
 Sep 3, 11)
 
-When Vim in an xterm owns the selection and the user does ":shell" Vim doesn't
-respond to selection requests.  Invoking XtDisownSelection() before executing
-the shell doesn't help.  Would require forking and doing a message loop, like
-what happens for the GUI.
-
 ":vimgrep" does not recognize a recursive symlink.  Is it possible to detect
 this, at least for Unix (using device/inode)?
 
@@ -3082,11 +3071,6 @@ Awaiting updated patches:
     use the patch that keeps using HLF_8 if HLF_WS has not
     been given values.
     Add section in help files for these highlight groups?
-8   "fg" and "bg" don't work in an xterm.  Get default colors from xterm
-    with an ESC sequence.
-    xterm can send colors for many things.  E.g. for the cursor:
-	<Esc>]12;?<Bel>
-    Can use this to get the background color and restore the colors on exit.
 7   Add "DefaultFG" and "DefaultBG" for the colors of the menu. (Marcin
     Dalecki has a patch for Motif and Carbon)
 -   Add possibility to highlight specific columns (for Fortran).  Or put a
@@ -3288,9 +3272,6 @@ Win32 GUI known bugs:
 8   When the 'shell' cannot be executed, should give an appropriate error msg.
     Esp. for a filter command, currently it only complains the file could not
     be read.
-7   Add an option to add one pixel column to the character width?  Lucida
-    Console italic is wider than the normal font ("d" overlaps with next char).
-    Opposite of 'linespace': 'columnspace'.
 7   At the hit-enter prompt scrolling now no longer works.  Need to use the
     keyboard to get around this.  Pretend <CR> was hit when the user tries to
     scroll?
@@ -3683,7 +3664,6 @@ Macintosh:
 8   Xterm sends ^[[H for <Home> and ^[[F for <End> in some mode.  Also
     recognize these keys?  Mostly useful for xterm simulators, like gnometerm.
     See http://dickey.his.com/xterm/xterm.faq.html#xterm_pc_style.
-8   For xterm also recognize keypad up/down/left/right and insert.
 8   '[ and '] should be set to start/end of line when using a linewise operator
     (e.g., ":w").
 8   CTRL-A can't handle big "long" numbers, they become negative.  Check for
@@ -3698,10 +3678,6 @@ Macintosh:
     filesystem, an illegal file name may be created: ".vim".
 8   For each buffer that is opened, the viminfo file is opened and read to
     check for file marks.  This can be slow.
-7   In xterm, recognize both vt100 and vt220 cursor keys.  Change
-    add_termcode() to not remove an existing entry for a name, when it's
-    needed.
-    Need a generic solution to recognize different codes for the same key.
 8   Core dump within signal function: gdb doesn't show stack backtrace!  Option
     to skip catch_signals()?
 9   Repeating a "cw" with "." doesn't work if the text was pasted from the
@@ -4633,9 +4609,6 @@ Messages:
 
 
 Screen updating:
-7   Add a string to the 'display' option to make CTRL-E and CTRL-Y scroll one
-    screen line, also if this means the first line doesn't start with the
-    first character (like what happens with a single line that doesn't fit).
 -   screen_line():
     - insert/delete character stuff.
     - improve delete rest of line (spaces at end of line).

runtime/doc/usr_25.txt

@@ -346,12 +346,13 @@ scroll:
 
 	g0		to first visible character in this line
 	g^		to first non-blank visible character in this line
-	gm		to middle of this line
+	gm		to middle of screen line
+	gM		to middle of the text in this line
 	g$		to last visible character in this line
 
-		|<--	 window    -->|
-	some long    text, part of which is visible ~
-		 g0  g^    gm	     g$
+		|<--	  window     -->|
+	some long    text, part of which is visible in one line ~
+		 g0  g^    gm	   gM g$
 
 
 BREAKING AT WORDS				*edit-no-break*

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 8.1.  Last change: 2019 Jul 06
+*usr_41.txt*	For Vim version 8.1.  Last change: 2019 Nov 17
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -796,6 +796,7 @@ Date and Time:				*date-functions* *time-functions*
 	getftime()		get last modification time of a file
 	localtime()		get current time in seconds
 	strftime()		convert time to a string
+	strptime()		convert a date/time string to time
 	reltime()		get the current or elapsed time accurately
 	reltimestr()		convert reltime() result to a string
 	reltimefloat()		convert reltime() result to a Float
@@ -856,6 +857,7 @@ Insert mode completion:				*completion-functions*
 	complete_check()	check if completion should be aborted
 	complete_info()		get current completion information
 	pumvisible()		check if the popup menu is displayed
+	pum_getpos()		position and size of popup menu if visible
 
 Folding:					*folding-functions*
 	foldclosed()		check for a closed fold at a specific line
@@ -902,6 +904,7 @@ Interactive:					*interactive-functions*
 	confirm()		let the user make a choice
 	getchar()		get a character from the user
 	getcharmod()		get modifiers for the last typed character
+	getmousepos()		get last known mouse position
 	feedkeys()		put characters in the typeahead queue
 	input()			get a line from the user
 	inputlist()		let the user pick an entry from a list

runtime/doc/usr_90.txt

@@ -480,9 +480,9 @@ probably contains your vimrc file and other runtime files that you created, so
 be careful.
 
 Else, if you installed Vim with the zip archives, the preferred way is to use
-the "uninstal" program (note the missing l at the end).  You can find it in
-the same directory as the "install" program, e.g., "c:\vim\vim61".  This
-should also work from the usual "install/remove software" page.
+the "uninstall" program.  You can find it in the same directory as the
+"install" program, e.g., "c:\vim\vim61".  This should also work from the usual
+"install/remove software" page.
    However, this only removes the registry entries for Vim.  You have to
 delete the files yourself.  Simply select the directory "vim\vim61" and delete
 it recursively.  There should be no files there that you changed, but you

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 8.1.  Last change: 2019 Sep 04
+*various.txt*   For Vim version 8.1.  Last change: 2019 Oct 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -337,7 +337,7 @@ N  *+clientserver*	Unix and Win32: Remote invocation |clientserver|
 T  *+cmdline_compl*	command line completion |cmdline-completion|
 S  *+cmdline_hist*	command line history |cmdline-history|
 N  *+cmdline_info*	|'showcmd'| and |'ruler'|
-N  *+comments*		|'comments'| support
+T  *+comments*		|'comments'| support
 B  *+conceal*		"conceal" support, see |conceal| |:syn-conceal| etc.
 N  *+cryptv*		encryption support |encryption|
 B  *+cscope*		|cscope| support
@@ -389,7 +389,7 @@ m  *+lua/dyn*		|Lua| interface |/dyn|
 N  *+menu*		|:menu|
 N  *+mksession*		|:mksession|
 T  *+modify_fname*	|filename-modifiers|
-N  *+mouse*		Mouse handling |mouse-using|
+T  *+mouse*		Mouse handling |mouse-using|
 N  *+mouseshape*	|'mouseshape'|
 B  *+mouse_dec*		Unix only: Dec terminal mouse handling |dec-mouse|
 N  *+mouse_gpm*		Unix only: Linux console mouse handling |gpm-mouse|
@@ -575,6 +575,8 @@ N  *+X11*		Unix only: can restore window title |X11|
 			   |:marks|      - filter by text in the current file,
 					   or file name for other files
 			   |:oldfiles|   - filter by file name
+			   |:registers|  - filter by register contents
+					   (does not work multi-line)
 			   |:set|        - filter by variable name
 
 			Only normal messages are filtered, error messages are

runtime/doc/vi_diff.txt

@@ -1,4 +1,4 @@
-*vi_diff.txt*   For Vim version 8.1.  Last change: 2019 May 13
+*vi_diff.txt*   For Vim version 8.1.  Last change: 2019 Nov 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -64,6 +64,9 @@ w300			number	(default 23)		*'w300'*
 w1200			number	(default 23)		*'w1200'*
 w9600			number	(default 23)		*'w9600'*
 
+Vi did not allow for changing the termcap entries, you would have to exit Vi,
+edit the termcap entry and try again.  Vim has the |terminal-options|.
+
 ==============================================================================
 3. Limits						*limits*
 
@@ -703,7 +706,7 @@ first character).
 
 CTRL-A works like CTRL-@ but does not leave insert mode.
 
-CTRL-R {0-9a-z..} can be used to insert the contents of a register.
+CTRL-R {register} can be used to insert the contents of a register.
 
 When the 'smartindent' option is set, C programs will be better auto-indented.
 With 'cindent' even more.
@@ -1320,6 +1323,11 @@ Set the $VIM_POSIX environment variable to have 'cpoptions' include the POSIX
 flags when Vim starts up.  This makes Vim run as POSIX as it can.  That's
 a bit different from being Vi compatible.
 
+You can find the Posix specification for Vi here:
+https://pubs.opengroup.org/onlinepubs/9699919799/utilities/vi.html
+And the related Ex specification:
+https://pubs.opengroup.org/onlinepubs/9699919799/utilities/ex.html
+
 This is where Vim does not behave as POSIX specifies and why:
 
 							*posix-screen-size*

runtime/doc/visual.txt

@@ -1,4 +1,4 @@
-*visual.txt*    For Vim version 8.1.  Last change: 2019 May 05
+*visual.txt*    For Vim version 8.1.  Last change: 2019 Nov 02
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -116,6 +116,7 @@ gn			Search forward for the last used search pattern, like
 			E.g., "dgn" deletes the text of the next match.
 			If Visual mode is active, extends the selection
 			until the end of the next match.
+			'wrapscan' applies
 			Note: Unlike `n` the search direction does not depend
 			on the previous search command.
 

runtime/doc/windows.txt

@@ -1,4 +1,4 @@
-*windows.txt*   For Vim version 8.1.  Last change: 2019 Aug 18
+*windows.txt*   For Vim version 8.1.  Last change: 2019 Oct 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -312,6 +312,9 @@ CTRL-W CTRL-Q						*CTRL-W_CTRL-Q*
 		    :+quit  " quit the next window
 		    :+2quit " quit the second next window
 <
+		When closing a help window, Vim will try to restore the
+		previous window layout |:helpclose|.
+
 :q[uit]!
 :{count}q[uit]!
 		Without {count}: Quit the current window.  If {count} is
@@ -545,6 +548,10 @@ CTRL-W +	Increase current window height by N (default 1).
 CTRL-W CTRL-_					*CTRL-W_CTRL-_* *CTRL-W__*
 CTRL-W _	Set current window height to N (default: highest possible).
 
+:{winnr}res[ize] [+-]N
+		Like `:resize` above, but apply the size to window {winnr}
+		instead of the current window.
+
 z{nr}<CR>	Set current window height to {nr}.
 
 						*CTRL-W_<*
@@ -1087,6 +1094,7 @@ list of buffers. |unlisted-buffer|
 		     R	 terminal buffers with a running job
 		     F	 terminal buffers with a finished job
 		     ?   terminal buffers without a job: `:terminal NONE`
+		     t   show time last used and sort buffers
 		Combining flags means they are "and"ed together, e.g.:
 		     h+   hidden buffers which are modified
 		     a+   active buffers which are modified

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2019 Aug 26
+" Last Change:	2019 Nov 01
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -384,8 +384,8 @@ au BufNewFile,BufRead configure.in,configure.ac setf config
 " CUDA  Cumpute Unified Device Architecture
 au BufNewFile,BufRead *.cu,*.cuh		setf cuda
 
-" Dockerfile
-au BufNewFile,BufRead Dockerfile,*.Dockerfile	setf dockerfile
+" Dockerfilb; Podman uses the same syntax with name Containerfile
+au BufNewFile,BufRead Containerfile,Dockerfile,*.Dockerfile	setf dockerfile
 
 " WildPackets EtherPeek Decoder
 au BufNewFile,BufRead *.dcd			setf dcd
@@ -425,6 +425,9 @@ au BufNewFile,BufRead *.csp,*.fdr		setf csp
 au BufNewFile,BufRead *.pld			setf cupl
 au BufNewFile,BufRead *.si			setf cuplsim
 
+" Dart
+au BufRead,BufNewfile *.dart,*.drt		setf dart
+
 " Debian Control
 au BufNewFile,BufRead */debian/control		setf debcontrol
 au BufNewFile,BufRead control
@@ -979,6 +982,9 @@ au BufNewFile,BufRead hg-editor-*.txt		setf hgcommit
 " Mercurial config (looks like generic config file)
 au BufNewFile,BufRead *.hgrc,*hgrc		setf cfg
 
+" Meson Build system config
+au BufNewFile,BufRead meson.build,meson_options.txt setf meson
+
 " Messages (logs mostly)
 au BufNewFile,BufRead */log/{auth,cron,daemon,debug,kern,lpr,mail,messages,news/news,syslog,user}{,.log,.err,.info,.warn,.crit,.notice}{,.[0-9]*,-[0-9]*} setf messages
 

runtime/ftplugin/bash.vim

@@ -11,21 +11,10 @@ if exists("b:did_ftplugin")
   finish
 endif
 
+unlet! b:is_sh
+unlet! b:is_kornshell
 let b:is_bash = 1
-if exists("b:is_sh")
-  unlet b:is_sh
-endif
-if exists("b:is_kornshell")
-  unlet b:is_kornshell
-endif
 
-" Setting 'filetype' here directly won't work, since we are being invoked
-" through an autocommand.  Do it later, on the BufWinEnter event.
-augroup bash_filetype
-  au BufWinEnter * call SetBashFt()
-augroup END
+runtime! ftplugin/sh.vim ftplugin/sh_*.vim ftplugin/sh/*.vim
 
-func SetBashFt()
-  au! bash_filetype
-  set ft=sh
-endfunc
+" vim: ts=8

runtime/ftplugin/j.vim

@@ -1,8 +1,8 @@
 " Vim filetype plugin
 " Language:	J
-" Maintainer:	David Bürgin <676c7473@gmail.com>
-" URL:		https://github.com/glts/vim-j
-" Last Change:	2015-09-27
+" Maintainer:	David Bürgin <dbuergin@gluet.ch>
+" URL:		https://gitlab.com/glts/vim-j
+" Last Change:	2015-10-27
 
 if exists('b:did_ftplugin')
   finish
@@ -25,7 +25,7 @@ setlocal include=\\v^\\s*(load\|require)\\s*'\\zs\\f+\\ze'
 setlocal includeexpr=substitute(substitute(tr(v:fname,'\\','/'),'\\v^[^~][^/.]*(/[^/.]+)$','&\\1',''),'\\v^\\~[^/]+/','','')
 setlocal suffixesadd=.ijs
 
-let b:undo_ftplugin = 'setlocal matchpairs< formatoptions< commentstring< comments< iskeyword< path< include< includeexpr< suffixesadd<'
+let b:undo_ftplugin = 'setlocal suffixesadd< includeexpr< include< path< matchpairs< formatoptions< commentstring< comments< iskeyword<'
 
 " Section movement with ]] ][ [[ []. The start/end patterns below are amended
 " inside the function in order to avoid matching on the current cursor line.

runtime/ftplugin/man.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	man
 " Maintainer:	SungHyun Nam <goweol@gmail.com>
-" Last Change: 	2019 Jul 22
+" Last Change: 	2019 Sep 26
 "		(fix by Jason Franklin)
 
 " To make the ":Man" command available before editing a manual page, source
@@ -132,11 +132,17 @@ func <SID>GetPage(cmdmods, ...)
     let page = expand('<cword>')
   endif
 
-  if sect != "" && s:FindPage(sect, page) == 0
-    let sect = ""
+  if !exists('g:ft_man_no_sect_fallback') || (g:ft_man_no_sect_fallback == 0)
+    if sect != "" && s:FindPage(sect, page) == 0
+      let sect = ""
+    endif
   endif
   if s:FindPage(sect, page) == 0
-    echo "\nCannot find a '".page."'."
+    let msg = "\nNo manual entry for ".page
+    if sect != ""
+      let msg .= " in section ".sect
+    endif
+    echo msg
     return
   endif
   exec "let s:man_tag_buf_".s:man_tag_depth." = ".bufnr("%")

runtime/ftplugin/matlab.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	matlab
 " Maintainer:	Jake Wasserman <jwasserman at gmail dot com>
-" Last Changed: 2014 Dec 30
+" Last Change: 	2019 Sep 27
 
 " Contributors:
 " Charles Campbell
@@ -24,8 +24,9 @@ endif
 
 setlocal suffixesadd=.m
 setlocal suffixes+=.asv
+setlocal commentstring=%\ %s
 
-let b:undo_ftplugin = "setlocal suffixesadd< suffixes< "
+let b:undo_ftplugin = "setlocal suffixesadd< suffixes< commentstring< "
 	\ . "| unlet! b:match_words"
 
 let &cpo = s:save_cpo

runtime/ftplugin/meson.vim

@@ -0,0 +1,19 @@
+" Vim filetype plugin file
+" Language:	meson
+" License:	VIM License
+" Original Author:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+" Last Change:		2018 Nov 27
+
+if exists("b:did_ftplugin") | finish | endif
+let b:did_ftplugin = 1
+let s:keepcpo= &cpo
+set cpo&vim
+
+setlocal commentstring=#\ %s
+setlocal comments=:#
+
+setlocal shiftwidth=2
+setlocal softtabstop=2
+
+let &cpo = s:keepcpo
+unlet s:keepcpo

runtime/ftplugin/scheme.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
 " Language: Scheme (R7RS)
-" Last Change: 2018-03-05
+" Last Change: 2019 Nov 18
 " Author: Evan Hanson <evhan@foldling.org>
 " Maintainer: Evan Hanson <evhan@foldling.org>
 " Previous Maintainer: Sergey Khorev <sergey.khorev@gmail.com>
@@ -21,7 +21,7 @@ setl iskeyword=33,35-39,42-43,45-58,60-90,94,95,97-122,126
 
 let b:undo_ftplugin = 'setl lisp< comments< commentstring< define< iskeyword<'
 
-setl lispwords=case
+setl lispwords+=case
 setl lispwords+=define
 setl lispwords+=define-record-type
 setl lispwords+=define-syntax

runtime/gvim.desktop

@@ -4,16 +4,25 @@
 # Translators: This is the Application Name used in the GVim desktop file
 Name[de]=GVim
 Name[eo]=GVim
+Name[ru]=GVim
+Name[sr]=GVim
+Name[tr]=GVim
 Name=GVim
 # Translators: This is the Generic Application Name used in the Vim desktop file
 GenericName[de]=Texteditor
 GenericName[eo]=Tekstoredaktilo
 GenericName[ja]=テキストエディタ
+GenericName[ru]=Текстовый редактор
+GenericName[sr]=Текст Едитор
+GenericName[tr]=Metin Düzenleyici
 GenericName=Text Editor
 # Translators: This is the comment used in the Vim desktop file
 Comment[de]=Textdateien bearbeiten
 Comment[eo]=Redakti tekstajn dosierojn
 Comment[ja]=テキストファイルを編集します
+Comment[ru]=Редактирование текстовых файлов
+Comment[sr]=Уређивање текст фајлова
+Comment[tr]=Metin dosyaları düzenleyin
 Comment=Edit text files
 # The translations should come from the po file. Leave them here for now, they will
 # be overwritten by the po file when generating the desktop.file!
@@ -71,17 +80,14 @@ Comment[pl]=Edytuj pliki tekstowe
 Comment[pt]=Editar ficheiros de texto
 Comment[pt_BR]=Edite arquivos de texto
 Comment[ro]=Editare fişiere text
-Comment[ru]=Редактор текстовых файлов
 Comment[sk]=Úprava textových súborov
 Comment[sl]=Urejanje datotek z besedili
 Comment[sq]=Përpuno files teksti
-Comment[sr]=Измени текстуалне датотеке
 Comment[sr@Latn]=Izmeni tekstualne datoteke
 Comment[sv]=Redigera textfiler
 Comment[ta]=உரை கோப்புகளை தொகுக்கவும்
 Comment[th]=แก้ไขแฟ้มข้อความ
 Comment[tk]=Metin faýllary editle
-Comment[tr]=Metin dosyalarını düzenle
 Comment[uk]=Редактор текстових файлів
 Comment[vi]=Soạn thảo tập tin văn bản
 Comment[wa]=Asspougnî des fitchîs tecses
@@ -95,10 +101,15 @@ Type=Application
 Keywords[de]=Text;Editor;
 Keywords[eo]=Teksto;redaktilo;
 Keywords[ja]=テキスト;エディタ;
+Keywords[ru]=текст;текстовый редактор;
+Keywords[sr]=Текст;едитор;
+Keywords[tr]=Metin;düzenleyici;
 Keywords=Text;editor;
 # Translators: This is the Icon file name. Do NOT translate
 Icon[de]=gvim
 Icon[eo]=gvim
+Icon[ru]=gvim
+Icon[sr]=gvim
 Icon=gvim
 Categories=Utility;TextEditor;
 StartupNotify=true

runtime/indent/bash.vim

@@ -0,0 +1,18 @@
+" Vim indent file
+" Language:	bash
+" Maintainer:	Bram
+" Last Change:	2019 Sep 27
+
+" Only load this indent file when no other was loaded.
+if exists("b:did_indent")
+   finish
+endif
+
+" The actual indenting is in sh.vim and controlled by buffer-local variables.
+unlet! b:is_sh
+unlet! b:is_kornshell
+let b:is_bash = 1
+
+runtime! indent/sh.vim
+
+" vim: ts=8

runtime/indent/j.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:	J
-" Maintainer:	David Bürgin <676c7473@gmail.com>
-" URL:		https://github.com/glts/vim-j
+" Maintainer:	David Bürgin <dbuergin@gluet.ch>
+" URL:		https://gitlab.com/glts/vim-j
 " Last Change:	2015-01-11
 
 if exists('b:did_indent')

runtime/indent/meson.vim

@@ -0,0 +1,180 @@
+" Vim indent file
+" Language:		Meson
+" License:		VIM License
+" Maintainer:		Nirbheek Chauhan <nirbheek.chauhan@gmail.com>
+" Original Authors:	David Bustos <bustos@caltech.edu>
+"			Bram Moolenaar <Bram@vim.org>
+" Last Change:		2019 Oct 18
+
+" Only load this indent file when no other was loaded.
+if exists("b:did_indent")
+  finish
+endif
+let b:did_indent = 1
+
+" Some preliminary settings
+setlocal nolisp		" Make sure lisp indenting doesn't supersede us
+setlocal autoindent	" indentexpr isn't much help otherwise
+
+setlocal indentexpr=GetMesonIndent(v:lnum)
+setlocal indentkeys+==elif,=else,=endforeach,=endif,0)
+
+" Only define the function once.
+if exists("*GetMesonIndent")
+  finish
+endif
+let s:keepcpo= &cpo
+set cpo&vim
+
+" Come here when loading the script the first time.
+
+let s:maxoff = 50	" maximum number of lines to look backwards for ()
+
+function GetMesonIndent(lnum)
+  echom getline(line("."))
+
+  " If this line is explicitly joined: If the previous line was also joined,
+  " line it up with that one, otherwise add two 'shiftwidth'
+  if getline(a:lnum - 1) =~ '\\$'
+    if a:lnum > 1 && getline(a:lnum - 2) =~ '\\$'
+      return indent(a:lnum - 1)
+    endif
+    return indent(a:lnum - 1) + (exists("g:mesonindent_continue") ? eval(g:mesonindent_continue) : (shiftwidth() * 2))
+  endif
+
+  " If the start of the line is in a string don't change the indent.
+  if has('syntax_items')
+	\ && synIDattr(synID(a:lnum, 1, 1), "name") =~ "String$"
+    return -1
+  endif
+
+  " Search backwards for the previous non-empty line.
+  let plnum = prevnonblank(v:lnum - 1)
+
+  if plnum == 0
+    " This is the first non-empty line, use zero indent.
+    return 0
+  endif
+
+  " If the previous line is inside parenthesis, use the indent of the starting
+  " line.
+  " Trick: use the non-existing "dummy" variable to break out of the loop when
+  " going too far back.
+  call cursor(plnum, 1)
+  let parlnum = searchpair('(\|{\|\[', '', ')\|}\|\]', 'nbW',
+	  \ "line('.') < " . (plnum - s:maxoff) . " ? dummy :"
+	  \ . " synIDattr(synID(line('.'), col('.'), 1), 'name')"
+	  \ . " =~ '\\(Comment\\|Todo\\|String\\)$'")
+  if parlnum > 0
+    let plindent = indent(parlnum)
+    let plnumstart = parlnum
+  else
+    let plindent = indent(plnum)
+    let plnumstart = plnum
+  endif
+
+
+  " When inside parenthesis: If at the first line below the parenthesis add
+  " a 'shiftwidth', otherwise same as previous line.
+  " i = (a
+  "       + b
+  "       + c)
+  call cursor(a:lnum, 1)
+  let p = searchpair('(\|{\|\[', '', ')\|}\|\]', 'bW',
+	  \ "line('.') < " . (a:lnum - s:maxoff) . " ? dummy :"
+	  \ . " synIDattr(synID(line('.'), col('.'), 1), 'name')"
+	  \ . " =~ '\\(Comment\\|Todo\\|String\\)$'")
+  if p > 0
+    if p == plnum
+      " When the start is inside parenthesis, only indent one 'shiftwidth'.
+      let pp = searchpair('(\|{\|\[', '', ')\|}\|\]', 'bW',
+	  \ "line('.') < " . (a:lnum - s:maxoff) . " ? dummy :"
+	  \ . " synIDattr(synID(line('.'), col('.'), 1), 'name')"
+	  \ . " =~ '\\(Comment\\|Todo\\|String\\)$'")
+      if pp > 0
+	return indent(plnum) + (exists("g:pyindent_nested_paren") ? eval(g:pyindent_nested_paren) : shiftwidth())
+      endif
+      return indent(plnum) + (exists("g:pyindent_open_paren") ? eval(g:pyindent_open_paren) : shiftwidth())
+    endif
+    if plnumstart == p
+      return indent(plnum)
+    endif
+    return plindent
+  endif
+
+
+  " Get the line and remove a trailing comment.
+  " Use syntax highlighting attributes when possible.
+  let pline = getline(plnum)
+  let pline_len = strlen(pline)
+  if has('syntax_items')
+    " If the last character in the line is a comment, do a binary search for
+    " the start of the comment.  synID() is slow, a linear search would take
+    " too long on a long line.
+    if synIDattr(synID(plnum, pline_len, 1), "name") =~ "\\(Comment\\|Todo\\)$"
+      let min = 1
+      let max = pline_len
+      while min < max
+	let col = (min + max) / 2
+	if synIDattr(synID(plnum, col, 1), "name") =~ "\\(Comment\\|Todo\\)$"
+	  let max = col
+	else
+	  let min = col + 1
+	endif
+      endwhile
+      let pline = strpart(pline, 0, min - 1)
+    endif
+  else
+    let col = 0
+    while col < pline_len
+      if pline[col] == '#'
+	let pline = strpart(pline, 0, col)
+	break
+      endif
+      let col = col + 1
+    endwhile
+  endif
+
+  " If the previous line ended the conditional/loop
+  if getline(plnum) =~ '^\s*\(endif\|endforeach\)\>\s*'
+    " Maintain indent
+    return -1
+  endif
+
+  " If the previous line ended with a builtin, indent this line
+  if pline =~ '^\s*\(foreach\|if\|else\|elif\)\>\s*'
+    return plindent + shiftwidth()
+  endif
+
+  " If the current line begins with a header keyword, deindent
+  if getline(a:lnum) =~ '^\s*\(else\|elif\|endif\|endforeach\)'
+
+    " Unless the previous line was a one-liner
+    if getline(plnumstart) =~ '^\s*\(foreach\|if\)\>\s*'
+      return plindent
+    endif
+
+    " Or the user has already dedented
+    if indent(a:lnum) <= plindent - shiftwidth()
+      return -1
+    endif
+
+    return plindent - shiftwidth()
+  endif
+
+  " When after a () construct we probably want to go back to the start line.
+  " a = (b
+  "       + c)
+  " here
+  if parlnum > 0
+    return plindent
+  endif
+
+  return -1
+
+endfunction
+
+let &cpo = s:keepcpo
+unlet s:keepcpo
+
+" vim:sw=2

runtime/indent/sh.vim

@@ -3,7 +3,7 @@
 " Maintainer:          Christian Brabandt <cb@256bit.org>
 " Original Author:     Nikolai Weibull <now@bitwi.se>
 " Previous Maintainer: Peter Aronoff <telemachus@arpinum.org>
-" Latest Revision:     2019-07-26
+" Latest Revision:     2019-10-24
 " License:             Vim (see :h license)
 " Repository:          https://github.com/chrisbra/vim-sh-indent
 " Changelog:
@@ -134,7 +134,7 @@ function! GetShIndent()
   " TODO: should we do the same for other "end" lines?
   if curline =~ '^\s*\%(fi\);\?\s*\%(#.*\)\=$'
     let ind = indent(v:lnum)
-    let previous_line = searchpair('\<if\>', '', '\<fi\>\zs', 'bnW', 'synIDattr(synID(line("."),col("."), 1),"name") =~? "comment"')
+    let previous_line = searchpair('\<if\>', '', '\<fi\>\zs', 'bnW', 'synIDattr(synID(line("."),col("."), 1),"name") =~? "comment\\|quote"')
     if previous_line > 0
       let ind = indent(previous_line)
     endif
@@ -195,7 +195,7 @@ endfunction
 function! s:is_function_definition(line)
   return a:line =~ '^\s*\<\k\+\>\s*()\s*{' ||
        \ a:line =~ '^\s*{' ||
-       \ a:line =~ '^\s*function\s*\w\S\+\s*\%(()\)\?\s*{'
+       \ a:line =~ '^\s*function\s*\k\+\s*\%(()\)\?\s*{'
 endfunction
 
 function! s:is_array(line)

runtime/indent/systemverilog.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:    SystemVerilog
 " Maintainer:  kocha <kocha.lsifrontend@gmail.com>
-" Last Change: 12-Aug-2013. 
+" Last Change: 05-Feb-2017 by Bilal Wasim
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -74,7 +74,7 @@ function SystemVerilogIndent()
 
   " Indent after if/else/for/case/always/initial/specify/fork blocks
   elseif last_line =~ '`\@<!\<\(if\|else\)\>' ||
-    \ last_line =~ '^\s*\<\(for\|case\%[[zx]]\|do\|foreach\|randcase\)\>' ||
+    \ last_line =~ '^\s*\<\(for\|case\%[[zx]]\|do\|foreach\|forever\|randcase\)\>' ||
     \ last_line =~ '^\s*\<\(always\|always_comb\|always_ff\|always_latch\)\>' ||
     \ last_line =~ '^\s*\<\(initial\|specify\|fork\|final\)\>'
     if last_line !~ '\(;\|\<end\>\)\s*' . sv_comment . '*$' ||
@@ -129,9 +129,9 @@ function SystemVerilogIndent()
   " De-indent for the end of one-line block
   elseif ( last_line !~ '\<begin\>' ||
     \ last_line =~ '\(//\|/\*\).*\<begin\>' ) &&
-    \ last_line2 =~ '\<\(`\@<!if\|`\@<!else\|for\|always\|initial\|do\|foreach\|final\)\>.*' .
+    \ last_line2 =~ '\<\(`\@<!if\|`\@<!else\|for\|always\|initial\|do\|foreach\|forever\|final\)\>.*' .
       \ sv_comment . '*$' &&
-    \ last_line2 !~ '\(//\|/\*\).*\<\(`\@<!if\|`\@<!else\|for\|always\|initial\|do\|foreach\|final\)\>' &&
+    \ last_line2 !~ '\(//\|/\*\).*\<\(`\@<!if\|`\@<!else\|for\|always\|initial\|do\|foreach\|forever\|final\)\>' &&
     \ last_line2 !~ sv_openstat . '\s*' . sv_comment . '*$' &&
     \ ( last_line2 !~ '\<begin\>' ||
     \ last_line2 =~ '\(//\|/\*\).*\<begin\>' )
@@ -194,7 +194,7 @@ function SystemVerilogIndent()
       \ last_line !~ '^\s*\<\(property\|checker\|program\)\>' &&
       \ last_line !~ '^\s*\()*\s*;\|)\+\)\s*' . sv_comment . '*$' &&
       \ ( last_line =~
-      \ '\<\(`\@<!if\|`\@<!else\|for\|case\%[[zx]]\|always\|initial\|do\|foreach\|randcase\|final\)\>' ||
+      \ '\<\(`\@<!if\|`\@<!else\|for\|case\%[[zx]]\|always\|initial\|do\|foreach\|forever\|randcase\|final\)\>' ||
       \ last_line =~ ')\s*' . sv_comment . '*$' ||
       \ last_line =~ sv_openstat . '\s*' . sv_comment . '*$' )
       let ind = ind - offset
@@ -227,4 +227,4 @@ endfunction
 let &cpo = s:cpo_save
 unlet s:cpo_save
 
-" vim:sw=2
+" vim:sw=2

runtime/indent/testdir/runtest.vim

@@ -20,6 +20,7 @@ func HandleSwapExists()
   endif
 endfunc
 
+let failed_count = 0
 for fname in glob('testdir/*.in', 1, 1)
   let root = substitute(fname, '\.in', '', '')
 
@@ -110,6 +111,7 @@ for fname in glob('testdir/*.in', 1, 1)
     endif
 
     if failed
+      let failed_count += 1
       exe 'write ' . root . '.fail'
       echoerr 'Test ' . fname . ' FAILED!'
     else
@@ -123,4 +125,8 @@ endfor
 " Matching "if 1" at the start.
 endif
 
+if failed_count > 0
+  " have make report an error
+  cquit
+endif
 qall!

runtime/indent/testdir/vim.in

@@ -44,3 +44,18 @@ let f = x
 " prev-line
 endfunc
 " END_INDENT
+
+" START_INDENT
+let a =<< END
+nothing
+END
+" END_INDENT
+
+" START_INDENT
+" INDENT_AT  this-line
+let a=<< trim END
+   blah
+      blah
+      blah this-line
+END
+" END_INDENT

runtime/indent/testdir/vim.ok

@@ -44,3 +44,18 @@ func Some()
 " prev-line
 endfunc
 " END_INDENT
+
+" START_INDENT
+let a =<< END
+    nothing
+END
+" END_INDENT
+
+" START_INDENT
+" INDENT_AT  this-line
+let a=<< trim END
+   blah
+      blah
+      blah this-line
+END
+" END_INDENT

runtime/indent/testdir/yaml.in

@@ -0,0 +1,14 @@
+# vim: set ft=yaml sw=2 et :
+
+# START_INDENT
+map1:
+sub1:
+- list item
+map2:
+- another list
+# END_INDENT
+
+# START_INDENT
+map: &anchor
+map: val
+# END_INDENT

runtime/indent/testdir/yaml.ok

@@ -0,0 +1,14 @@
+# vim: set ft=yaml sw=2 et :
+
+# START_INDENT
+map1:
+  sub1:
+    - list item
+map2:
+  - another list
+# END_INDENT
+
+# START_INDENT
+map: &anchor
+map: val
+# END_INDENT

runtime/indent/typescript.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language: TypeScript
 " Maintainer: See https://github.com/HerringtonDarkholme/yats.vim
-" Last Change: 2019 Jun 06
+" Last Change: 2019 Oct 18
 " Acknowledgement: Based off of vim-ruby maintained by Nikolai Weibull http://vim-ruby.rubyforge.org
 
 " 0. Initialization {{{1
@@ -442,7 +442,7 @@ let &cpo = s:cpo_save
 unlet s:cpo_save
 
 function! Fixedgq(lnum, count)
-    let l:tw = &tw ? &tw : 80;
+    let l:tw = &tw ? &tw : 80
 
     let l:count = a:count
     let l:first_char = indent(a:lnum) + 1

runtime/indent/vim.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:	Vim script
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2016 Jun 27
+" Last Change:	2019 Oct 31
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -56,6 +56,31 @@ function GetVimIndentIntern()
   " and :else.  Add it three times for a line that starts with '\' or '"\ '
   " after a line that doesn't (or g:vim_indent_cont if it exists).
   let ind = indent(lnum)
+
+  " In heredoc indenting works completely differently.
+  if has('syntax_items') 
+    let syn_here = synIDattr(synID(v:lnum, 1, 1), "name")
+    if syn_here =~ 'vimLetHereDocStop'
+      " End of heredoc: use indent of matching start line
+      let lnum = v:lnum - 1
+      while lnum > 0
+	if synIDattr(synID(lnum, 1, 1), "name") !~ 'vimLetHereDoc'
+	  return indent(lnum)
+	endif
+	let lnum -= 1
+      endwhile
+      return 0
+    endif
+    if syn_here =~ 'vimLetHereDoc'
+      if synIDattr(synID(lnum, 1, 1), "name") !~ 'vimLetHereDoc'
+	" First line in heredoc: increase indent
+	return ind + shiftwidth()
+      endif
+      " Heredoc continues: no change in indent
+      return ind
+    endif
+  endif
+
   if cur_text =~ s:lineContPat && v:lnum > 1 && prev_text !~ s:lineContPat
     if exists("g:vim_indent_cont")
       let ind = ind + g:vim_indent_cont

runtime/indent/xml.vim

@@ -1,8 +1,8 @@
-"     Language: xml
-"   Repository: https://github.com/chrisbra/vim-xml-ftplugin
-" Last Changed: July 27, 2019
-"   Maintainer: Christian Brabandt <cb@256bit.org>
-" Previous Maintainer:  Johannes Zellner <johannes@zellner.org>
+" Language: XML
+" Maintainer: Christian Brabandt <cb@256bit.org>
+" Repository: https://github.com/chrisbra/vim-xml-ftplugin
+" Previous Maintainer: Johannes Zellner <johannes@zellner.org>
+" Last Changed: 2019 Oct 24
 " Last Change:
 " 20190726 - Correctly handle non-tagged data
 " 20190204 - correctly handle wrap tags

runtime/indent/yaml.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:         YAML
 " Maintainer:       Nikolai Pavlov <zyx.vim@gmail.com>
-" Last Change:	    2017 Jun 13
+" Last Change:	    2019 Sep 28
 
 " Only load this indent file when no other was loaded.
 if exists('b:did_indent')
@@ -29,7 +29,7 @@ function s:FindPrevLessIndentedLine(lnum, ...)
     let curindent = a:0 ? a:1 : indent(a:lnum)
     while           prevlnum
                 \&&  indent(prevlnum) >=  curindent
-                \&& getline(prevlnum) =~# '^\s*#'
+                \&& getline(prevlnum) !~# '^\s*#'
         let prevlnum = prevnonblank(prevlnum-1)
     endwhile
     return prevlnum

runtime/keymap/russian-jcukenwintype.vim

@@ -1,5 +1,6 @@
-" Vim Keymap file for russian characters, layout 'jcuken', MS Windows variant
-" (slightly incompatible with XFree86 'ru' keymap - makes use of NUMERO SIGN)
+" Vim Keymap file for russian characters, layout 'jcuken', MS Windows
+" Typewriter variant (slightly incompatible with XFree86 'ru' keymap -
+" makes use of NUMERO SIGN)
 " Useful mainly with utf-8 but may work with other encodings
 
 " Derived from russian-jcuken.vim by Artem Chuprina <ran@ran.pp.ru>
@@ -15,14 +16,13 @@ scriptencoding utf-8
 let b:keymap_name = "ru"
 
 loadkeymap
-~	+	CYRILLIC CAPITAL LETTER IO
-`	|	CYRILLIC SMALL LETTER IO	
 F	А	CYRILLIC CAPITAL LETTER A
 <	Б	CYRILLIC CAPITAL LETTER BE
 D	В	CYRILLIC CAPITAL LETTER VE
 U	Г	CYRILLIC CAPITAL LETTER GHE
 L	Д	CYRILLIC CAPITAL LETTER DE
 T	Е	CYRILLIC CAPITAL LETTER IE
+?	Ё	CYRILLIC CAPITAL LETTER IO
 :	Ж	CYRILLIC CAPITAL LETTER ZHE
 P	З	CYRILLIC CAPITAL LETTER ZE
 B	И	CYRILLIC CAPITAL LETTER I
@@ -55,6 +55,7 @@ d	в	CYRILLIC SMALL LETTER VE
 u	г	CYRILLIC SMALL LETTER GHE
 l	д	CYRILLIC SMALL LETTER DE
 t	е	CYRILLIC SMALL LETTER IE
+/	ё	CYRILLIC SMALL LETTER IO
 ;	ж	CYRILLIC SMALL LETTER ZHE
 p	з	CYRILLIC SMALL LETTER ZE
 b	и	CYRILLIC SMALL LETTER I
@@ -81,13 +82,7 @@ m	ь	CYRILLIC SMALL LETTER SOFT SIGN
 '	э	CYRILLIC SMALL LETTER E
 .	ю	CYRILLIC SMALL LETTER YU
 z	я	CYRILLIC SMALL LETTER YA
-@	"
-#	№	NUMERO SIGN
-$	;
-^	:
-&	?
-/	ё
-?	Ё
+`	|
 1	№
 2	-
 3	/
@@ -100,5 +95,18 @@ $	;
 0	%
 -	!
 =	;
+~	+
+!	1
+@	2
+#	3
+$	4
+%	5
+^	6
+&	7
+*	8
+(	9
+)	0
+_	=
++	\\
 \\	)
 \|	(

runtime/lang/menu_chinese_gb.936.vim

@@ -1,270 +1,452 @@
 " Menu Translations:    Simplified Chinese
 " Maintainer:           Shun Bai <baishunde@gmail.com>
 " Previous Maintainer:  Yuheng Xie <elephant@linux.net.cn>
-" Last Change:          2014 Oct 15
-
-" vim: ts=8 sw=8 noet
+" Last Change:          2019-09-10
 
 " Quit when menu translations have already been done.
 if exists("did_menu_trans")
   finish
 endif
 let did_menu_trans = 1
-let s:keepcpo= &cpo
+let s:keepcpo = &cpo
 set cpo&vim
 
 scriptencoding cp936
 
 " Help menu
-menutrans &Help			<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)
-menutrans &Overview<Tab><F1>	<09><><EFBFBD><EFBFBD>(&O)<Tab><F1>
-menutrans &User\ Manual		<09>û<EFBFBD><EFBFBD>ֲ<EFBFBD>(&U)
-menutrans &How-to\ links	How-to\ ָ<EFBFBD><EFBFBD>(&H)
-menutrans &Find\.\.\.		<09><><EFBFBD><EFBFBD>(&F)\.\.\.
-menutrans &Credits		<09><>л(&C)
-menutrans Co&pying		<09><>Ȩ(&P)
-menutrans &Sponsor/Register	<09><><EFBFBD><EFBFBD>/ע<EFBFBD><EFBFBD>(&S)
-menutrans O&rphans		<09>¶<EFBFBD>(&R)
-menutrans &Version		<09>汾(&V)
-menutrans &About		<09><><EFBFBD><EFBFBD>(&A)
+menutrans &Help		<09><><EFBFBD><EFBFBD>(&H)
+" Help menuitems and dialog {{{1
+menutrans &Overview<Tab><F1>	<09><><EFBFBD><EFBFBD>(&O)<Tab><F1>
+menutrans &User\ Manual			<09>û<EFBFBD><EFBFBD>ֲ<EFBFBD>(&U)
+menutrans &How-to\ Links		<09><><EFBFBD><EFBFBD>ʹ<EFBFBD><EFBFBD>(&H)
+menutrans &Find\.\.\.			<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&F)\.\.\.
+menutrans &Credits				<EFBFBD><EFBFBD>л(&C)
+menutrans Co&pying				<09><>Ȩ(&P)
+menutrans &Sponsor/Register		<09><><EFBFBD><EFBFBD>/ע<EFBFBD><EFBFBD>(&S)
+menutrans O&rphans				<09><><EFBFBD>ȹ¶<EFBFBD>(&R)
+menutrans &Version				<09>汾(&V)
+menutrans &About				<09><><EFBFBD><EFBFBD>(&A)
+
+" fun! s:Helpfind()
+if !exists("g:menutrans_help_dialog")
+  let g:menutrans_help_dialog = "<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>򵥴<EFBFBD><F2B5A5B4>Ի<EFBFBD><D4BB>ð<EFBFBD><C3B0><EFBFBD>:\n\nǰ׺ i_ <20><>ʾ<EFBFBD><CABE><EFBFBD><EFBFBD>ģʽ<C4A3>µ<EFBFBD><C2B5><EFBFBD><EFBFBD><EFBFBD>(<28><>: i_CTRL-X)\nǰ׺ c_ <20><>ʾ<EFBFBD><CABE><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>µı༭<C4B1><E0BCAD><EFBFBD><EFBFBD>(<28><>: c_<Del>)\nǰ׺ ' <20><>ʾѡ<CABE><D1A1><EFBFBD><EFBFBD>(<28><>: 'shiftwidth')"
+endif
+" }}}
 
 " File menu
-menutrans &File				<09>ļ<EFBFBD>(&F)
-menutrans &Open\.\.\.<Tab>:e		<09><><EFBFBD><EFBFBD>(&O)\.\.\.<Tab>:e
-menutrans Sp&lit-Open\.\.\.<Tab>:sp	<09>ָ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&L)\.\.\.<Tab>:sp
-menutrans Open\ Tab\.\.\.<Tab>:tabnew	<09>򿪱<EFBFBD>ǩ\.\.\.<Tab>:tabnew
-menutrans &New<Tab>:enew		<09>½<EFBFBD>(&N)<Tab>:enew
-menutrans &Close<Tab>:close		<09>ر<EFBFBD>(&C)<Tab>:close
-menutrans &Save<Tab>:w			<09><EFBFBD><EFBFBD><EFBFBD>(&S)<Tab>:w
-menutrans Save\ &As\.\.\.<Tab>:sav	<09><><EFBFBD><EFBFBD>Ϊ(&A)\.\.\.<Tab>:sav
-menutrans Split\ &Diff\ with\.\.\.	<09>ָ<EFBFBD><EFBFBD>Ƚ<EFBFBD>(Diff)(&D)\.\.\.
-menutrans Split\ Patched\ &By\.\.\.	<09>ָ<EFBFBD><EFBFBD>򲹶<EFBFBD>(Patch)(&B)\.\.\.
-menutrans &Print			<09><>ӡ(&P)
-menutrans Sa&ve-Exit<Tab>:wqa		<09><><EFBFBD>沢<EFBFBD>˳<EFBFBD>(&V)<Tab>:wqa
-menutrans E&xit<Tab>:qa			<09>˳<EFBFBD>(&X)<Tab>:qa
+menutrans &File		<09>ļ<EFBFBD>(&F)
+" File menuitems {{{1
+menutrans &Open\.\.\.<Tab>:e			<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)\.\.\.<Tab>:e
+menutrans Sp&lit-Open\.\.\.<Tab>:sp		<09>ڲ<EFBFBD><EFBFBD>ִ<EFBFBD><EFBFBD>ڴ<EFBFBD><EFBFBD><EFBFBD>(&L)\.\.\.<Tab>:sp
+menutrans Open\ Tab\.\.\.<Tab>:tabnew	<EFBFBD>ڱ<EFBFBD>ǩҳ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>\.\.\.<Tab>:tabnew
+menutrans &New<Tab>:enew				<09>½<EFBFBD>(&N)<Tab>:enew
+menutrans &Close<Tab>:close				<09>ر<EFBFBD>(&C)<Tab>:close
+menutrans &Save<Tab>:w					<09><><EFBFBD><EFBFBD>(&S)<Tab>:w
+menutrans Save\ &As\.\.\.<Tab>:sav		<09><><EFBFBD><EFBFBD>Ϊ(&A)\.\.\.<Tab>:sav
+menutrans Split\ &Diff\ With\.\.\.		<09><><EFBFBD>ִ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ԶԱȲ<EFBFBD><EFBFBD><EFBFBD>(Diff)(&D)\.\.\.
+menutrans Split\ Patched\ &By\.\.\.		<09><><EFBFBD>ִ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Խ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>޲<EFBFBD>(Patch)(&B)\.\.\.
+menutrans &Print						<09><>ӡ(&P)
+menutrans Sa&ve-Exit<Tab>:wqa			<09><EFBFBD><EFBFBD>沢<EFBFBD>˳<EFBFBD>(&V)<Tab>:wqa
+menutrans E&xit<Tab>:qa					<09>˳<EFBFBD>(&X)<Tab>:qa
+" }}}
 
 " Edit menu
-menutrans &Edit				<09>༭(&E)
-menutrans &Undo<Tab>u			<09><><EFBFBD><EFBFBD>(&U)<Tab>u
-menutrans &Redo<Tab>^R			<09><><EFBFBD><EFBFBD>(&R)<Tab>^R
-menutrans Rep&eat<Tab>\.		<09>ظ<EFBFBD><EFBFBD>ϴβ<EFBFBD><EFBFBD><EFBFBD>(&E)<Tab>\.
-menutrans Cu&t<Tab>"+x			<09><><EFBFBD><EFBFBD>(&T)<Tab>"+x
-menutrans &Copy<Tab>"+y			<09><><EFBFBD><EFBFBD>(&C)<Tab>"+y
-menutrans &Paste<Tab>"+gP		ճ<EFBFBD><EFBFBD>(&P)<Tab>"+gP
-menutrans Put\ &Before<Tab>[p		ճ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǰ(&B)<Tab>[p
-menutrans Put\ &After<Tab>]p		ճ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&A)<Tab>]p
-menutrans &Delete<Tab>x			ɾ<EFBFBD><EFBFBD>(&D)<Tab>x
-menutrans &Select\ All<Tab>ggVG		ȫѡ(&S)<Tab>ggVG
-menutrans &Find\.\.\.			<09><><EFBFBD><EFBFBD>(&F)\.\.\.
-menutrans Find\ and\ Rep&lace\.\.\.	<09><><EFBFBD>Һ<EFBFBD><EFBFBD>滻(&L)\.\.\.
-menutrans &Find<Tab>/			<09><><EFBFBD><EFBFBD>(&F)<Tab>/
-menutrans Find\ and\ Rep&lace<Tab>:%s	<09><><EFBFBD>Һ<EFBFBD><EFBFBD>滻(&L)<Tab>:%s
-menutrans Settings\ &Window		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)
-menutrans Startup\ &Settings		<09><><EFBFBD><EFBFBD><EFBFBD>趨(&S)
-menutrans &Global\ Settings		ȫ<EFBFBD><EFBFBD><EFBFBD>趨(&G)
+menutrans &Edit		<09>༭(&E)
+" Edit menuitems {{{1
+menutrans &Undo<Tab>u						<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&U)<Tab>u
+menutrans &Redo<Tab>^R						<09>ָ<EFBFBD>(&R)<Tab>^R
+menutrans Rep&eat<Tab>\.					<09>ظ<EFBFBD>(&E)<Tab>\.
+menutrans Cu&t<Tab>"+x						<09><><EFBFBD><EFBFBD>(&T)<Tab>"+x
+menutrans &Copy<Tab>"+y						<09><><EFBFBD><EFBFBD>(&C)<Tab>"+y
+menutrans &Paste<Tab>"+gP					ճ<><D5B3>(&P)<Tab>"+gP
+menutrans Put\ &Before<Tab>[p				ճ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǰ(&B)<Tab>[p
+menutrans Put\ &After<Tab>]p				ճ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&A)<Tab>]p
+menutrans &Delete<Tab>x						ɾ<EFBFBD><EFBFBD>(&D)<Tab>x
+menutrans &Select\ All<Tab>ggVG				ȫѡ(&S)<Tab>ggVG
+menutrans &Find\.\.\.						<09><><EFBFBD><EFBFBD>(&F)\.\.\.
+menutrans Find\ and\ Rep&lace\.\.\.			<09><><EFBFBD>Һ<EFBFBD><EFBFBD>滻(&L)\.\.\.
+menutrans &Find<Tab>/						<09><><EFBFBD><EFBFBD>(&F)<Tab>/
+menutrans Find\ and\ Rep&lace<Tab>:%s		<09><><EFBFBD>Һ<EFBFBD><EFBFBD>滻(&L)<Tab>:%s
+menutrans Settings\ &Window					<09><><EFBFBD>ô<EFBFBD><EFBFBD><EFBFBD>(&W)
+menutrans Startup\ &Settings				<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
 
 " Edit/Global Settings
-menutrans Toggle\ Pattern\ &Highlight<Tab>:set\ hls!	<09><>/<2F><>ģʽ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)<Tab>:set\ hls!
-menutrans Toggle\ &Ignore-case<Tab>:set\ ic!		<09><>/<2F>غ<EFBFBD><EFBFBD>Դ<EFBFBD>Сд(&I)<Tab>:set\ ic!
-menutrans Toggle\ &Showmatch<Tab>:set\ sm!		<09><>/<2F><><EFBFBD><EFBFBD>ʾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)<Tab>:set\ sm!
-menutrans &Context\ lines			<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&C)
-
-menutrans &Virtual\ Edit			<09><><EFBFBD><EFBFBD><EFBFBD>༭(&V)
+menutrans &Global\ Settings					ȫ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&G)
+" Edit.Global Settings menuitems and dialogs {{{2
+menutrans Toggle\ Pattern\ &Highlight<Tab>:set\ hls!		<09><>/<2F>ظ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)<Tab>:set\ hls!
+menutrans Toggle\ &Ignoring\ Case<Tab>:set\ ic!				<09><>/<2F>غ<EFBFBD><EFBFBD>Դ<EFBFBD>Сд(&I)<Tab>:set\ ic!
+menutrans Toggle\ &Showing\ Matched\ Pairs<Tab>:set\ sm!	<09><>/<2F><><EFBFBD><EFBFBD>ʾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ƥ<EFBFBD><EFBFBD>(&S)<Tab>:set\ sm!
+menutrans &Context\ Lines									<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&C)
+menutrans &Virtual\ Edit									<09><><EFBFBD><EFBFBD><EFBFBD>༭(&V)
+" Edit.Global Settings.Virtual Edit menuitems {{{3
 menutrans Never					<09>Ӳ<EFBFBD>
-menutrans Block\ Selection			<EFBFBD><EFBFBD>ѡ<EFBFBD><EFBFBD>
-menutrans Insert\ mode				<09><EFBFBD><EFBFBD><EFBFBD>ģʽ
-menutrans Block\ and\ Insert			<09><>ѡ<EFBFBD><EFBFBD><EFBFBD>Ͳ<EFBFBD><EFBFBD><EFBFBD>ģʽ
-menutrans Always				<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-
-menutrans Toggle\ Insert\ &Mode<Tab>:set\ im!	<09><>/<2F>ز<EFBFBD><EFBFBD><EFBFBD>ģʽ(&M)<Tab>:set\ im!
-menutrans Toggle\ Vi\ C&ompatible<Tab>:set\ cp!	<09><>/<2F><>\ Vi\ <20><><EFBFBD><EFBFBD><Tab>:set\ cp!
-menutrans Search\ &Path\.\.\.			<09><><EFBFBD><EFBFBD>·<EFBFBD><C2B7>(&P)\.\.\.
-menutrans Ta&g\ Files\.\.\.			Tag\ <20>ļ<EFBFBD>(&T)\.\.\.
+menutrans Block\ Selection		ֻ<EFBFBD><EFBFBD>ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ο<EFBFBD>ʱ
+menutrans Insert\ Mode			ֻ<EFBFBD>ڲ<EFBFBD><EFBFBD><EFBFBD>ģʽʱ
+menutrans Block\ and\ Insert	<09><>ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ο<EFBFBD><EFBFBD>Ͳ<EFBFBD><EFBFBD><EFBFBD>ģʽʱ
+menutrans Always				ʼ<EFBFBD><EFBFBD>
+" }}}
+menutrans Toggle\ Insert\ &Mode<Tab>:set\ im!				<09><>/<2F>ز<EFBFBD><EFBFBD><EFBFBD>ģʽ(&M)<Tab>:set\ im!
+menutrans Toggle\ Vi\ C&ompatibility<Tab>:set\ cp!			<09><>/<2F><>\ Vi\ <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)<Tab>:set\ cp!
+menutrans Search\ &Path\.\.\.								<09><><EFBFBD><EFBFBD>·<EFBFBD><C2B7>(&P)\.\.\.
+menutrans Ta&g\ Files\.\.\.									<09><><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>(Tags)(&G)\.\.\.
 
 " GUI options
-menutrans Toggle\ &Toolbar			<09><>/<2F>ع<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&T)
-menutrans Toggle\ &Bottom\ Scrollbar		<09><>/<2F>صײ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&B)
-menutrans Toggle\ &Left\ Scrollbar		<09><>/<2F><><EFBFBD><EFBFBD><EFBFBD>˹<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&L)
-menutrans Toggle\ &Right\ Scrollbar		<09><>/<2F><><EFBFBD>Ҷ˹<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)
+menutrans Toggle\ &Toolbar									<09><>/<2F>ع<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&T)
+menutrans Toggle\ &Bottom\ Scrollbar						<09><>/<2F>صײ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&B)
+menutrans Toggle\ &Left\ Scrollbar							<09><>/<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&L)
+menutrans Toggle\ &Right\ Scrollbar							<09><>/<2F><><EFBFBD>Ҳ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)
+
+" fun! s:SearchP()
+if !exists("g:menutrans_path_dialog")
+  let g:menutrans_path_dialog = "<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>·<EFBFBD><C2B7><EFBFBD><EFBFBD>\n<>ö<EFBFBD><C3B6>ŷָ<C5B7>Ŀ¼<C4BF><C2BC><EFBFBD><EFBFBD>"
+endif
+
+" fun! s:TagFiles()
+if !exists("g:menutrans_tags_dialog")
+  let g:menutrans_tags_dialog = "<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>(Tags)<29><><EFBFBD>ơ<EFBFBD>\n<>ö<EFBFBD><C3B6>ŷָ<C5B7><D6B8>ļ<EFBFBD><C4BC><EFBFBD><EFBFBD><EFBFBD>"
+endif
+" }}}
 
 " Edit/File Settings
-menutrans F&ile\ Settings			<09>ļ<EFBFBD><EFBFBD>趨(&I)
-
+menutrans F&ile\ Settings					<EFBFBD>ļ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&I)
+" Edit.File Settings menuitems and dialogs {{{2
 " Boolean options
-menutrans Toggle\ Line\ &Numbering<Tab>:set\ nu!		<09><>/<2F><><EFBFBD><EFBFBD>ʾ<EFBFBD>к<EFBFBD>(&N)<Tab>:set\ nu!
-menutrans Toggle\ relati&ve\ Line\ Numbering<Tab>:set\ rnu!	<09><>/<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>к<EFBFBD>(&V)<Tab>:set\ rnu!
-menutrans Toggle\ &List\ Mode<Tab>:set\ list!			<09><>/<2F><>\ list\ ģʽ(&L)<Tab>:set\ list!
-menutrans Toggle\ Line\ &Wrap<Tab>:set\ wrap!			<09><>/<2F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)<Tab>:set\ wrap!
-menutrans Toggle\ W&rap\ at\ word<Tab>:set\ lbr!		<09><>/<2F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)<Tab>:set\ lbr!
-menutrans Toggle\ &expand-tab<Tab>:set\ et!			<09><>/<2F><><EFBFBD><EFBFBD>չ\ tab(&E)<Tab>:set\ et!
-menutrans Toggle\ &auto-indent<Tab>:set\ ai!			<09><>/<2F><><EFBFBD>Զ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&A)<Tab>:set\ ai!
-menutrans Toggle\ &C-indenting<Tab>:set\ cin!			<EFBFBD><EFBFBD>/<2F><>\ C\ <20><><EFBFBD><EFBFBD>(&C)<Tab>:set\ cin!
+menutrans Toggle\ Line\ &Numbering<Tab>:set\ nu!			<EFBFBD><EFBFBD>/<2F><><EFBFBD>к<EFBFBD>(&N)<Tab>:set\ nu!
+menutrans Toggle\ Relati&ve\ Line\ Numbering<Tab>:set\ rnu!	<09><>/<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>к<EFBFBD>(&V)<Tab>:set\ rnu!
+menutrans Toggle\ &List\ Mode<Tab>:set\ list!				<EFBFBD><EFBFBD>/<2F><><EFBFBD>б<EFBFBD>ģʽ(&L)<Tab>:set\ list!
+menutrans Toggle\ Line\ &Wrapping<Tab>:set\ wrap!			<09><>/<2F>ػ<EFBFBD><EFBFBD><EFBFBD>(&W)<Tab>:set\ wrap!
+menutrans Toggle\ W&rapping\ at\ Word<Tab>:set\ lbr!		<09><>/<2F>ش<EFBFBD>β<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)<Tab>:set\ lbr!
+menutrans Toggle\ Tab\ &Expanding<Tab>:set\ et!				<EFBFBD><EFBFBD>/<2F><><EFBFBD>Ʊ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>չ(&E)<Tab>:set\ et!
+menutrans Toggle\ &Auto\ Indenting<Tab>:set\ ai!			<09><>/<2F><><EFBFBD>Զ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&A)<Tab>:set\ ai!
+menutrans Toggle\ &C-Style\ Indenting<Tab>:set\ cin!		<09><>/<2F><>\ C\ <EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʽ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&C)<Tab>:set\ cin!
 
 " other options
-menutrans &Shiftwidth			<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
-menutrans Soft\ &Tabstop		Soft\ Tab\ <20><><EFBFBD><EFBFBD>(&T)
-menutrans Te&xt\ Width\.\.\.		<09>ı<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&X)\.\.\.
-menutrans &File\ Format\.\.\.		<09>ļ<EFBFBD><EFBFBD><EFBFBD>ʽ(&F)\.\.\.
-menutrans C&olor\ Scheme		<09><>ɫ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)
-menutrans Select\ Fo&nt\.\.\.		ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&N)\.\.\.
-menutrans &Keymap			<09><><EFBFBD><EFBFBD>ӳ<EFBFBD><EFBFBD>(&K)
+menutrans &Shiftwidth										<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
+menutrans Soft\ &Tabstop									<09><><EFBFBD>Ʊ<EFBFBD>λ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(Soft Tabstop)(&T)
+menutrans Te&xt\ Width\.\.\.								<09>ı<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&X)\.\.\.
+menutrans &File\ Format\.\.\.								<09>ļ<EFBFBD><EFBFBD><EFBFBD>ʽ(&F)\.\.\.
+
+" fun! s:TextWidth()
+if !exists("g:menutrans_textwidth_dialog")
+  let g:menutrans_textwidth_dialog = "<22><><EFBFBD><EFBFBD><EFBFBD>ı<EFBFBD><C4B1><EFBFBD><EFBFBD><EFBFBD>(ÿ<><C3BF><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ַ<EFBFBD><D6B7><EFBFBD><EFBFBD><EFBFBD>0 <20><>ʾ<EFBFBD><CABE><EFBFBD><EFBFBD>):"
+endif
+
+" fun! s:FileFormat()
+if !exists("g:menutrans_fileformat_dialog")
+  let g:menutrans_fileformat_dialog = "ѡ<><D1A1><EFBFBD>ļ<EFBFBD><C4BC>ı<EFBFBD><C4B1><EFBFBD><EFBFBD><EFBFBD>ʽ:"
+endif
+if !exists("g:menutrans_fileformat_choices")
+  let g:menutrans_fileformat_choices = "&Unix\n&Dos\n&Mac\nȡ<6E><C8A1>(&C)"
+endif
+" }}}
+menutrans Show\ C&olor\ Schemes\ in\ Menu	<09>ڲ˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʾ<EFBFBD><EFBFBD>ɫ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)
+menutrans C&olor\ Scheme					<09><>ɫ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)
+menutrans Show\ &Keymaps\ in\ Menu			<09>ڲ˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ӳ<EFBFBD><EFBFBD>(&K)
+menutrans &Keymap							<09><><EFBFBD><EFBFBD>ӳ<EFBFBD><EFBFBD>(&K)
+menutrans Select\ Fo&nt\.\.\.				ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&N)\.\.\.
+" }}}
 
 " Programming menu
-menutrans &Tools			<09><><EFBFBD><EFBFBD>(&T)
-menutrans &Jump\ to\ this\ tag<Tab>g^]	<09><>ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>\ tag(&J)<Tab>g^]
-menutrans Jump\ &back<Tab>^T		<09><>ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&B)<Tab>^T
-menutrans Build\ &Tags\ File		<09><><EFBFBD><EFBFBD>\ Tags\ <20>ļ<EFBFBD>(&T)
+menutrans &Tools	<09><><EFBFBD><EFBFBD>(&T)
+" Tools menuitems {{{1
+menutrans &Jump\ to\ This\ Tag<Tab>g^]			<EFBFBD><EFBFBD>ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(Tag)(&J)<Tab>g^]
+menutrans Jump\ &Back<Tab>^T					<09><>ת<EFBFBD><EFBFBD>(&B)<Tab>^T
+menutrans Build\ &Tags\ File					<09><><EFBFBD>ɱ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>(Tags)(&T)
 
 " Tools.Spelling Menu
-menutrans &Spelling				ƴд<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
-menutrans &Spell\ Check\ On			<09><><EFBFBD><EFBFBD>ƴд<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
-menutrans Spell\ Check\ &Off			<09>ر<EFBFBD>ƴд<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)
-menutrans To\ &Next\ error<Tab>]s		<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&N)<Tab>]s
-menutrans To\ &Previous\ error<Tab>[s		<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&P)<Tab>[s
-menutrans Suggest\ &Corrections<Tab>z=		<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&C)<Tab>z=
-menutrans &Repeat\ correction<Tab>:spellrepall	<09>ظ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)<Tab>:spellrepall
-menutrans Set\ language\ to\ "en"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en"
-menutrans Set\ language\ to\ "en_au"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_au"
-menutrans Set\ language\ to\ "en_ca"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_ca"
-menutrans Set\ language\ to\ "en_gb"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_gb"
-menutrans Set\ language\ to\ "en_nz"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_nz"
-menutrans Set\ language\ to\ "en_us"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_us"
-menutrans &Find\ More\ Languages		<09><><EFBFBD>Ҹ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&F)
+menutrans &Spelling								ƴд<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
+" Tools.Spelling menuitems and dialog {{{2
+menutrans &Spell\ Check\ On						<09><EFBFBD><EFBFBD><EFBFBD>ƴд<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
+menutrans Spell\ Check\ &Off					<09>ر<EFBFBD>ƴд<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)
+menutrans To\ &Next\ Error<Tab>]s				<EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&N)<Tab>]s
+menutrans To\ &Previous\ Error<Tab>[s			<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&P)<Tab>[s
+menutrans Suggest\ &Corrections<Tab>z=			<09><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&C)<Tab>z=
+menutrans &Repeat\ Correction<Tab>:spellrepall	<09><><EFBFBD><EFBFBD>ȫ<EFBFBD><EFBFBD>ͬ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)<Tab>:spellrepall
+menutrans Set\ Language\ to\ "en"				<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en"
+menutrans Set\ Language\ to\ "en_au"			<09><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_au"
+menutrans Set\ Language\ to\ "en_ca"			<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_ca"
+menutrans Set\ Language\ to\ "en_gb"			<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_gb"
+menutrans Set\ Language\ to\ "en_nz"			<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_nz"
+menutrans Set\ Language\ to\ "en_us"			<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_us"
+menutrans &Find\ More\ Languages				<09><><EFBFBD>Ҹ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&F)
+
+" func! s:SpellLang()
+if !exists("g:menutrans_set_lang_to")
+  let g:menutrans_set_lang_to = "<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ"
+endif
+" }}}
 
 " Tools.Fold Menu
+menutrans &Folding								<09>۵<EFBFBD>(&F)
+" Tools.Fold menuitems {{{2
 " open close folds
-menutrans &Folding				<EFBFBD>۵<EFBFBD>(&F)
-menutrans &Enable/Disable\ folds<Tab>zi		<EFBFBD><EFBFBD><EFBFBD><EFBFBD>/<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&E)<Tab>zi
-menutrans &View\ Cursor\ Line<Tab>zv		<09>鿴<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&V)<Tab>zv
-menutrans Vie&w\ Cursor\ Line\ only<Tab>zMzx	<09><><EFBFBD>鿴<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)<Tab>zMzx
-menutrans C&lose\ more\ folds<Tab>zm		<EFBFBD>رո<EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&L)<Tab>zm
-menutrans &Close\ all\ folds<Tab>zM		<EFBFBD>ر<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&C)<Tab>zM
-menutrans O&pen\ more\ folds<Tab>zr		<EFBFBD>򿪸<EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&P)<Tab>zr
-menutrans &Open\ all\ folds<Tab>zR		<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&O)<Tab>zR
+menutrans &Enable/Disable\ Folds<Tab>zi			<09><><EFBFBD><EFBFBD>/<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&E)<Tab>zi
+menutrans &View\ Cursor\ Line<Tab>zv			չ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&V)<Tab>zv
+menutrans Vie&w\ Cursor\ Line\ Only<Tab>zMzx	ֻչ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)<Tab>zMzx
+menutrans C&lose\ More\ Folds<Tab>zm			<09>۵<EFBFBD>һ<EFBFBD><EFBFBD>(&L)<Tab>zm
+menutrans &Close\ All\ Folds<Tab>zM				<09>۵<EFBFBD>ȫ<EFBFBD><EFBFBD>(&C)<Tab>zM
+menutrans O&pen\ More\ Folds<Tab>zr				չ<EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD>(&P)<Tab>zr
+menutrans &Open\ All\ Folds<Tab>zR				չ<EFBFBD><EFBFBD>ȫ<EFBFBD><EFBFBD>(&O)<Tab>zR
 " fold method
-menutrans Fold\ Met&hod			<09>۵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)
-menutrans M&anual			<09>ֹ<EFBFBD>(&A)
-menutrans I&ndent			<09><><EFBFBD><EFBFBD>(&N)
-menutrans E&xpression			<09><><EFBFBD><EFBFBD>ʽ(&X)
-menutrans S&yntax			<09>﷨(&Y)
-menutrans &Diff				<09>Ƚ<EFBFBD>(Diff)(&D)
-menutrans Ma&rker			<09><><EFBFBD><EFBFBD>(&R)
+menutrans Fold\ Met&hod							<09>۵<EFBFBD><EFBFBD><EFBFBD>ʽ(&H)
+" Tools.Fold.Fold Method menuitems {{{3
+menutrans M&anual		<09>ֶ<EFBFBD>(&A)
+menutrans I&ndent		<09><><EFBFBD><EFBFBD>(&N)
+menutrans E&xpression	<09><><EFBFBD><EFBFBD>ʽ(&X)
+menutrans S&yntax		<09>﷨(&Y)
+menutrans &Diff			<09><><EFBFBD><EFBFBD>(Diff)(&D)
+menutrans Ma&rker		<09>Ǻ<EFBFBD>(Marker)(&R)
+" }}}
 " create and delete folds
-menutrans Create\ &Fold<Tab>zf		<09><><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&F)<Tab>zf
-menutrans &Delete\ Fold<Tab>zd		ɾ<EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&D)<Tab>zd
-menutrans Delete\ &All\ Folds<Tab>zD	ɾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&A)<Tab>zD
+menutrans Create\ &Fold<Tab>zf					<09><><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&F)<Tab>zf
+menutrans &Delete\ Fold<Tab>zd					ɾ<EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&D)<Tab>zd
+menutrans Delete\ &All\ Folds<Tab>zD			ɾ<EFBFBD><EFBFBD>ȫ<EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&A)<Tab>zD
 " moving around in folds
-menutrans Fold\ column\ &width		<09>۵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)
+menutrans Fold\ Col&umn\ Width					<09>۵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)
+" }}}
 
 " Tools.Diff Menu
-menutrans &Diff				<09>Ƚ<EFBFBD>(Diff)(&D)
-menutrans &Update			<09><><EFBFBD><EFBFBD>(&U)
-menutrans &Get\ Block			<09>õ<EFBFBD><EFBFBD><EFBFBD>(&G)
-menutrans &Put\ Block			<09><><EFBFBD>ÿ<EFBFBD>(&P)
+menutrans &Diff									<09><><EFBFBD><EFBFBD>(Diff)(&D)
+" Tools.Diff menuitems {{{2
+menutrans &Update		ˢ<EFBFBD><EFBFBD>(&U)
+menutrans &Get\ Block	<09><><EFBFBD>öԲ<EFBFBD><EFBFBD>ı<EFBFBD><EFBFBD><EFBFBD>(&G)
+menutrans &Put\ Block	<09><><EFBFBD>ñ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ı<EFBFBD><EFBFBD><EFBFBD>(&P)
+" }}}
 
-menutrans &Make<Tab>:make		Make(&M)<Tab>:make
-menutrans &List\ Errors<Tab>:cl		<09>г<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&L)<Tab>:cl
-menutrans L&ist\ Messages<Tab>:cl!	<09>г<EFBFBD><EFBFBD><EFBFBD>Ϣ(&I)<Tab>:cl!
-menutrans &Next\ Error<Tab>:cn		<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&N)<Tab>:cn
-menutrans &Previous\ Error<Tab>:cp	<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&P)<Tab>:cp
-menutrans &Older\ List<Tab>:cold	<EFBFBD><EFBFBD><EFBFBD>ɵĴ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>б<EFBFBD>(&O)<Tab>:cold
-menutrans N&ewer\ List<Tab>:cnew	<09><><EFBFBD>µĴ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>б<EFBFBD>(&E)<Tab>:cnew
-menutrans Error\ &Window		<09><><EFBFBD>󴰿<EFBFBD>(&W)
-menutrans &Update<Tab>:cwin		<09><><EFBFBD><EFBFBD>(&U)<Tab>:cwin
+menutrans &Make<Tab>:make						<09><><EFBFBD><EFBFBD>(Make)(&M)<Tab>:make
+menutrans &List\ Errors<Tab>:cl					<09>г<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&L)<Tab>:cl
+menutrans L&ist\ Messages<Tab>:cl!				<09>г<EFBFBD><EFBFBD><EFBFBD>Ϣ(&I)<Tab>:cl!
+menutrans &Next\ Error<Tab>:cn					<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&N)<Tab>:cn
+menutrans &Previous\ Error<Tab>:cp				<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&P)<Tab>:cp
+menutrans &Older\ List<Tab>:cold				<EFBFBD>ϾɵĴ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>б<EFBFBD>(&O)<Tab>:cold
+menutrans N&ewer\ List<Tab>:cnew				<09><><EFBFBD>µĴ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>б<EFBFBD>(&E)<Tab>:cnew
+menutrans Error\ &Window						<09><><EFBFBD>󴰿<EFBFBD>(&W)
+" Tools.Error Window menuitems {{{2
+menutrans &Update<Tab>:cwin		ˢ<EFBFBD><EFBFBD>(&U)<Tab>:cwin
 menutrans &Open<Tab>:copen		<09><><EFBFBD><EFBFBD>(&O)<Tab>:copen
-menutrans &Close<Tab>:cclose		<09>ر<EFBFBD>(&C)<Tab>:cclose
-menutrans &Convert\ to\ HEX<Tab>:%!xxd	ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʮ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><Tab>:%!xxd
-menutrans Conve&rt\ back<Tab>:%!xxd\ -r	ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><Tab>:%!xxd\ -r
-menutrans Se&T\ Compiler		<EFBFBD>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&T)
+menutrans &Close<Tab>:cclose	<09>ر<EFBFBD>(&C)<Tab>:cclose
+" }}}
+menutrans Show\ Compiler\ Se&ttings\ in\ Menu	<09>ڲ˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&T)
+menutrans Se&t\ Compiler						<09><><EFBFBD>ñ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&T)
+menutrans &Convert\ to\ HEX<Tab>:%!xxd			ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʮ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&C)<Tab>:%!xxd
+menutrans Conve&rt\ Back<Tab>:%!xxd\ -r			ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)<Tab>:%!xxd\ -r
+" }}}
 
-" Names for buffer menu.
-menutrans &Buffers		<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&B)
-menutrans &Refresh\ menu	<09><><EFBFBD>²˵<C2B2>(&R)
-menutrans &Delete		ɾ<EFBFBD><EFBFBD>(&D)
-menutrans &Alternate		<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&A)
-menutrans &Next			<09><>һ<EFBFBD><EFBFBD>(&N)
-menutrans &Previous		<09><>һ<EFBFBD><EFBFBD>(&P)
+" Buffer menu
+menutrans &Buffers	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&B)
+" Buffer menuitems and dialog {{{1
+menutrans &Refresh\ Menu	ˢ<EFBFBD>±<EFBFBD><EFBFBD>˵<EFBFBD>(&R)
+menutrans &Delete			ɾ<EFBFBD><EFBFBD>(&D)
+menutrans &Alternate		<09>л<EFBFBD>(&A)
+menutrans &Next				<09><>һ<EFBFBD><EFBFBD>(&N)
+menutrans &Previous			<09><>һ<EFBFBD><EFBFBD>(&P)
+
+" func! s:BMMunge(fname, bnum) 
+if !exists("g:menutrans_no_file")
+  let g:menutrans_no_file = "[<5B><><EFBFBD>ļ<EFBFBD>]"
+endif
+" }}}
 
 " Window menu
-menutrans &Window			<09><><EFBFBD><EFBFBD>(&W)
-menutrans &New<Tab>^Wn			<09>½<EFBFBD>(&N)<Tab>^Wn
-menutrans S&plit<Tab>^Ws		<EFBFBD>ָ<EFBFBD>(&P)<Tab>^Ws
-menutrans Sp&lit\ To\ #<Tab>^W^^	<09>ָ\ #(&L)<Tab>^W^^
-menutrans Split\ &Vertically<Tab>^Wv	<09><>ֱ<EFBFBD>ָ<EFBFBD>(&V)<Tab>^Wv
-menutrans Split\ File\ E&xplorer	<09>ָ<EFBFBD><EFBFBD>ļ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&X)
-menutrans &Close<Tab>^Wc		<09>ر<EFBFBD>(&C)<Tab>^Wc
-menutrans Close\ &Other(s)<Tab>^Wo	<09>ر<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)<Tab>^Wo
-menutrans Move\ &To			<EFBFBD>ƶ<EFBFBD><EFBFBD><EFBFBD>(&T)
-menutrans &Top<Tab>^WK			<09><><EFBFBD><EFBFBD>(&T)<Tab>^WK
-menutrans &Bottom<Tab>^WJ		<09>׶<EFBFBD>(&B)<Tab>^WJ
-menutrans &Left\ side<Tab>^WH		<09><><EFBFBD><EFBFBD>(&L)<Tab>^WH
-menutrans &Right\ side<Tab>^WL		<09>ұ<EFBFBD>(&R)<Tab>^WL
-" menutrans Ne&xt<Tab>^Ww		<09><>һ<EFBFBD><D2BB>(&X)<Tab>^Ww
-" menutrans P&revious<Tab>^WW		<EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD>(&R)<Tab>^WW
-menutrans Rotate\ &Up<Tab>^WR		<09><><EFBFBD><EFBFBD><EFBFBD>ֻ<EFBFBD>(&U)<Tab>^WR
-menutrans Rotate\ &Down<Tab>^Wr		<09><><EFBFBD><EFBFBD><EFBFBD>ֻ<EFBFBD>(&D)<Tab>^Wr
-menutrans &Equal\ Size<Tab>^W=		<09>ȴ<EFBFBD>(&E)<Tab>^W=
-menutrans &Max\ Height<Tab>^W_		<09><><EFBFBD><EFBFBD><EFBFBD>߶<EFBFBD>(&M)<Tab>^W
-menutrans M&in\ Height<Tab>^W1_		<09><>С<EFBFBD>߶<EFBFBD>(&I)<Tab>^W1_
-menutrans Max\ &Width<Tab>^W\|		<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)<Tab>^W\|
-menutrans Min\ Widt&h<Tab>^W1\|		<09><>С<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)<Tab>^W1\|
-"
-" The popup menu
-menutrans &Undo			<09><><EFBFBD><EFBFBD>(&U)
-menutrans Cu&t			<09><><EFBFBD><EFBFBD>(&T)
-menutrans &Copy			<09><><EFBFBD><EFBFBD>(&C)
-menutrans &Paste		ճ<EFBFBD><EFBFBD>(&P)
-menutrans &Delete		ɾ<EFBFBD><EFBFBD>(&D)
-menutrans Select\ Blockwise	ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-menutrans Select\ &Word		ѡ<EFBFBD>񵥴<EFBFBD>(&W)
-menutrans Select\ &Sentence	ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
-menutrans Select\ Pa&ragraph	ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)
-menutrans Select\ &Line		ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&L)
-menutrans Select\ &Block	ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&B)
-menutrans Select\ &All		ȫѡ(&A)
-"
-" The GUI toolbar
+menutrans &Window	<09><><EFBFBD><EFBFBD>(&W)
+" Window menuitems {{{1
+menutrans &New<Tab>^Wn					<09>½<EFBFBD>(&N)<Tab>^Wn
+menutrans S&plit<Tab>^Ws				<09><><EFBFBD><EFBFBD>(&P)<Tab>^Ws
+menutrans Sp&lit\ To\ #<Tab>^W^^		<09><><EFBFBD>ֲ<EFBFBD><EFBFBD><EFBFBD>ʾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>\ #(&L)<Tab>^W^^
+menutrans Split\ &Vertically<Tab>^Wv	<09><>ֱ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&V)<Tab>^Wv
+menutrans Split\ File\ E&xplorer		<09><><EFBFBD>ֲ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&X)
+menutrans &Close<Tab>^Wc				<09>ر<EFBFBD>(&C)<Tab>^Wc
+menutrans Close\ &Other(s)<Tab>^Wo		<09><><EFBFBD><EFBFBD>֮<EFBFBD><EFBFBD>ȫ<EFBFBD><EFBFBD><EFBFBD>ر<EFBFBD>(&O)<Tab>^Wo
+menutrans Move\ &To						<09>ƶ<EFBFBD><EFBFBD><EFBFBD>(&T)
+menutrans &Top<Tab>^WK					<09><><EFBFBD><EFBFBD>(&T)<Tab>^WK
+menutrans &Bottom<Tab>^WJ				<09>׶<EFBFBD>(&B)<Tab>^WJ
+menutrans &Left\ Side<Tab>^WH			<09><><EFBFBD><EFBFBD>(&L)<Tab>^WH
+menutrans &Right\ Side<Tab>^WL			<09>ұ<EFBFBD>(&R)<Tab>^WL
+menutrans Rotate\ &Up<Tab>^WR			<09><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ֻ<EFBFBD>(&U)<Tab>^WR
+menutrans Rotate\ &Down<Tab>^Wr			<09><><EFBFBD><EFBFBD><EFBFBD>ֻ<EFBFBD>(&D)<Tab>^Wr
+menutrans &Equal\ Size<Tab>^W=			ƽ<EFBFBD><EFBFBD><EFBFBD>ֲ<EFBFBD>(&E)<Tab>^W=
+menutrans &Max\ Height<Tab>^W_			<09><><EFBFBD><EFBFBD><EFBFBD>߶<EFBFBD>(&M)<Tab>^W
+menutrans M&in\ Height<Tab>^W1_			<09><>С<EFBFBD>߶<EFBFBD>(&I)<Tab>^W1_
+menutrans Max\ &Width<Tab>^W\|			<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)<Tab>^W\|
+menutrans Min\ Widt&h<Tab>^W1\|			<09><>С<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)<Tab>^W1\|
+" }}}
+
+" The popup menu {{{1
+menutrans &Undo					<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&U)
+menutrans Cu&t					<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&T)
+menutrans &Copy					<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&C)
+menutrans &Paste				ճ<EFBFBD><EFBFBD>(&P)
+menutrans &Delete				ɾ<EFBFBD><EFBFBD>(&D)
+menutrans Select\ Blockwise		<09><>Ϊѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ο<EFBFBD>
+menutrans Select\ &Word			ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)
+menutrans Select\ &Sentence		ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
+menutrans Select\ Pa&ragraph	ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)
+menutrans Select\ &Line			ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&L)
+menutrans Select\ &Block		ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ο<EFBFBD>(&B)
+menutrans Select\ &All			ȫѡ(&A)
+
+" func! <SID>SpellPopup()
+if !exists("g:menutrans_spell_change_ARG_to")
+  let g:menutrans_spell_change_ARG_to = '<27><>\ "%s"\ <20><><EFBFBD><EFBFBD>Ϊ'
+endif
+if !exists("g:menutrans_spell_add_ARG_to_word_list")
+  let g:menutrans_spell_add_ARG_to_word_list = '<27><>\ "%s"\ <20><><EFBFBD>ӵ<EFBFBD><D3B5>ʵ<EFBFBD>'
+endif
+if !exists("g:menutrans_spell_ignore_ARG")
+  let g:menutrans_spell_ignore_ARG = '<27><><EFBFBD><EFBFBD>\ "%s"'
+endif
+" }}}
+
+" The GUI toolbar {{{1
 if has("toolbar")
   if exists("*Do_toolbar_tmenu")
     delfun Do_toolbar_tmenu
   endif
   fun Do_toolbar_tmenu()
-    tmenu ToolBar.Open		<09><><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>
-    tmenu ToolBar.Save		<09><><EFBFBD>浱ǰ<EFBFBD>ļ<EFBFBD>
-    tmenu ToolBar.SaveAll	<09><><EFBFBD><EFBFBD>ȫ<EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>
-    tmenu ToolBar.Print		<09><>ӡ
-    tmenu ToolBar.Undo		<09><><EFBFBD><EFBFBD>
-    tmenu ToolBar.Redo		<09><><EFBFBD><EFBFBD>
-    tmenu ToolBar.Cut		<EFBFBD><EFBFBD><EFBFBD>е<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-    tmenu ToolBar.Copy		<09><><EFBFBD>Ƶ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-    tmenu ToolBar.Paste		<EFBFBD>Ӽ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ճ<EFBFBD><EFBFBD>
-    tmenu ToolBar.Find		<09><><EFBFBD><EFBFBD>...
-    tmenu ToolBar.FindNext	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD>
-    tmenu ToolBar.FindPrev	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD>
-    tmenu ToolBar.Replace	<09><><EFBFBD>Һ<EFBFBD><EFBFBD>滻...
-    tmenu ToolBar.LoadSesn	<09><><EFBFBD>ػỰ
-    tmenu ToolBar.SaveSesn	<09><><EFBFBD>浱ǰ<EFBFBD>Ự
-    tmenu ToolBar.RunScript	<EFBFBD><EFBFBD><EFBFBD><EFBFBD> Vim <20>ű<EFBFBD>
-    tmenu ToolBar.Make		ִ<EFBFBD><EFBFBD> Make (:make)
-    tmenu ToolBar.RunCtags	<09>ڵ<EFBFBD>ǰĿ¼<EFBFBD><EFBFBD><EFBFBD><EFBFBD> tags (!ctags -R .)
-    tmenu ToolBar.TagJump	<09><>ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>λ<EFBFBD>õ<EFBFBD> tag
-    tmenu ToolBar.Help		Vim <20><><EFBFBD><EFBFBD>
-    tmenu ToolBar.FindHelp	<09><><EFBFBD><EFBFBD> Vim <20><><EFBFBD><EFBFBD>
+    let did_toolbar_tmenu = 1
+    tmenu ToolBar.Open			<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>
+    tmenu ToolBar.Save			<09><><EFBFBD>浱ǰ<EFBFBD>ļ<EFBFBD>
+    tmenu ToolBar.SaveAll		ȫ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+    tmenu ToolBar.Print			<09><>ӡ
+    tmenu ToolBar.Undo			<09><><EFBFBD><EFBFBD>
+    tmenu ToolBar.Redo			<EFBFBD>ָ<EFBFBD>
+    tmenu ToolBar.Cut			<09><><EFBFBD>е<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+    tmenu ToolBar.Copy			<09><><EFBFBD>Ƶ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+    tmenu ToolBar.Paste			<09>Ӽ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ճ<EFBFBD><EFBFBD>
+    if !has("gui_athena")
+      tmenu ToolBar.Replace		<09><><EFBFBD>Һ<EFBFBD><EFBFBD>滻...
+      tmenu ToolBar.FindNext	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD>
+      tmenu ToolBar.FindPrev	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD>
+    endif
+    tmenu ToolBar.LoadSesn		<EFBFBD><EFBFBD><EFBFBD>ػỰ
+    tmenu ToolBar.SaveSesn		<09><><EFBFBD>浱ǰ<EFBFBD>Ự
+    tmenu ToolBar.RunScript		<09><><EFBFBD><EFBFBD> Vim <20>ű<EFBFBD>
+    tmenu ToolBar.Make			<09><><EFBFBD>ɵ<EFBFBD>ǰ<EFBFBD><EFBFBD>Ŀ (:make)
+    tmenu ToolBar.RunCtags		<09>ڵ<EFBFBD>ǰĿ¼<EFBFBD><EFBFBD><EFBFBD>ɱ<EFBFBD><EFBFBD><EFBFBD>(Tags) (!ctags -R .)
+    tmenu ToolBar.TagJump		<09><>ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ڱ<EFBFBD><EFBFBD><EFBFBD>(Tag)
+    tmenu ToolBar.Help			Vim <20><><EFBFBD><EFBFBD>
+    tmenu ToolBar.FindHelp		<09><> Vim <20><><EFBFBD><EFBFBD><EFBFBD>в<EFBFBD><EFBFBD><EFBFBD>
   endfun
 endif
+" }}}
 
 " Syntax menu
-menutrans &Syntax			<09>﷨(&S)
-menutrans &Show\ filetypes\ in\ menu	<09>ڲ˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʾ<EFBFBD>ļ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
-menutrans &Off				<09>ر<EFBFBD>(&O)
-menutrans &Manual			<09>ֹ<EFBFBD>(&M)
-menutrans A&utomatic			<09>Զ<EFBFBD>(&U)
-menutrans on/off\ for\ &This\ file	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD><C4BC><EFBFBD>/<EFBFBD><EFBFBD>(&T)
-menutrans Co&lor\ test			ɫ<EFBFBD>ʲ<EFBFBD><EFBFBD><EFBFBD>(&L)
-menutrans &Highlight\ test		<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)
-menutrans &Convert\ to\ HTML		ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD>\ HTML(&C)
-menutrans Set\ '&syntax'\ only		<09><><EFBFBD>趨\ 'syntax'(&S)
-menutrans Set\ '&filetype'\ too		Ҳ<EFBFBD>趨\ 'filetype'(&F)
+menutrans &Syntax	<09>﷨(&S)
+" Syntax menuitems {{{1
+menutrans &Show\ File\ Types\ in\ Menu	<09>ڲ˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʾ<EFBFBD>ļ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
+menutrans &Off							<09>ر<EFBFBD>(&O)
+menutrans &Manual						<EFBFBD>ֶ<EFBFBD>(&M)
+menutrans A&utomatic					<09>Զ<EFBFBD>(&U)
+menutrans On/Off\ for\ &This\ File		ֻ<><D6BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD><C4BC><EFBFBD>/<EFBFBD><EFBFBD>(&T)
+menutrans Co&lor\ Test					ɫ<EFBFBD>ʲ<EFBFBD><EFBFBD><EFBFBD>(&L)
+menutrans &Highlight\ Test				<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)
+menutrans &Convert\ to\ HTML			ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD>\ HTML(&C)
+" From synmenu.vim
+menutrans Set\ '&syntax'\ Only			ֻ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>\ 'syntax'(&S)
+menutrans Set\ '&filetype'\ Too			Ҳ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>\ 'filetype'(&F)
+" }}}
+
+" Netrw menu {{{1
+" Plugin loading may be after menu translation
+" So giveup testing if Netrw Plugin is loaded
+" if exists("g:loaded_netrwPlugin")
+  menutrans Help<tab><F1>					<09><><EFBFBD><EFBFBD><tab><F1>
+  menutrans Bookmarks						<09><>ǩ
+  menutrans History							<09><>ʷ<EFBFBD><EFBFBD>¼
+  menutrans Go\ Up\ Directory<tab>-			<09><><EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD><tab>-
+  menutrans Apply\ Special\ Viewer<tab>x	<09><>Ĭ<EFBFBD>ϳ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><tab>x
+  menutrans Bookmarks\ and\ History			<09><>ǩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʷ<EFBFBD><EFBFBD>¼
+  " Netrw.Bookmarks and History menuitems {{{2
+  menutrans Bookmark\ Current\ Directory<tab>mb		<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǩ<tab>mb
+  menutrans Bookmark\ Delete						<09>Ƴ<EFBFBD><EFBFBD><EFBFBD>ǩ
+  menutrans Goto\ Prev\ Dir\ (History)<tab>u		<09><><EFBFBD><EFBFBD>(<EFBFBD><EFBFBD>ʷ<EFBFBD><EFBFBD>¼)<tab>u
+  menutrans Goto\ Next\ Dir\ (History)<tab>U		ǰ<EFBFBD><EFBFBD>(<EFBFBD><EFBFBD>ʷ<EFBFBD><EFBFBD>¼)<tab>U
+  menutrans List<tab>qb								<09><><EFBFBD><EFBFBD><EFBFBD>б<EFBFBD><tab>qb
+  " }}}
+  menutrans Browsing\ Control				<09><><EFBFBD><EFBFBD>
+  " Netrw.Browsing Control menuitems {{{2
+  menutrans Horizontal\ Split<tab>o					<09>ڲ<EFBFBD><EFBFBD>ִ<EFBFBD><EFBFBD>ڴ<EFBFBD><EFBFBD><EFBFBD><tab>o
+  menutrans Vertical\ Split<tab>v					<09>ڴ<EFBFBD>ֱ<EFBFBD><EFBFBD><EFBFBD>ִ<EFBFBD><EFBFBD>ڴ<EFBFBD><EFBFBD><EFBFBD><tab>v
+  menutrans New\ Tab<tab>t							<09>ڱ<EFBFBD>ǩҳ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><tab>t	
+  menutrans Preview<tab>p							Ԥ<EFBFBD><EFBFBD><tab>p
+  menutrans Edit\ File\ Hiding\ List<tab><ctrl-h>	<09>༭<EFBFBD><E0BCAD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(Hiding\ List)<tab><ctrl-h>
+  menutrans Edit\ Sorting\ Sequence<tab>S			<09>༭<EFBFBD><E0BCAD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(Sorting\ Sequence)<tab>S
+  menutrans Quick\ Hide/Unhide\ Dot\ Files<tab>gh	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>/<EFBFBD><EFBFBD>ʾ<EFBFBD><EFBFBD>\.<2E><>ͷ<EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD><tab>gh
+  menutrans Refresh\ Listing<tab><ctrl-l>			ˢ<EFBFBD><EFBFBD><tab><ctrl-l>
+  menutrans Settings/Options<tab>:NetrwSettings		<09><><EFBFBD><EFBFBD>/ѡ<EFBFBD><EFBFBD><tab>:NetrwSettings
+  " }}}
+  menutrans Delete\ File/Directory<tab>D	ɾ<><C9BE><EFBFBD>ļ<EFBFBD>/Ŀ¼<tab>D
+  menutrans Edit\ File/Dir					<09>༭<EFBFBD>ļ<EFBFBD>/Ŀ¼
+  " Netrw.Edit File menuitems {{{2
+  menutrans Create\ New\ File<tab>%				<09>½<EFBFBD><C2BD>ļ<EFBFBD><tab>%
+  menutrans In\ Current\ Window<tab><cr>		<09>ڵ<EFBFBD>ǰ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><tab><cr>
+  menutrans Preview\ File/Directory<tab>p		Ԥ<><D4A4><EFBFBD>ļ<EFBFBD>/Ŀ¼<tab>p
+  menutrans In\ Previous\ Window<tab>P			<09><><EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><tab>P
+  menutrans In\ New\ Window<tab>o				<09><><EFBFBD>´<EFBFBD><C2B4><EFBFBD><tab>o
+  menutrans In\ New\ Tab<tab>t					<09><><EFBFBD>±<EFBFBD>ǩҳ<tab>t
+  menutrans In\ New\ Vertical\ Window<tab>v		<09><><EFBFBD>´<EFBFBD>ֱ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><tab>v
+  " }}}
+  menutrans Explore							<09><><EFBFBD><EFBFBD>
+  " Netrw.Explore menuitems {{{2
+  menutrans Directory\ Name															ָ<EFBFBD><EFBFBD>Ŀ¼<EFBFBD><EFBFBD>
+  menutrans Filenames\ Matching\ Pattern\ (curdir\ only)<tab>:Explore\ */			ƥ<><C6A5>ָ<EFBFBD><D6B8><EFBFBD>ļ<EFBFBD><C4BC><EFBFBD>ģʽ(<28><>ǰĿ¼)<tab>:Explore\ */
+  menutrans Filenames\ Matching\ Pattern\ (+subdirs)<tab>:Explore\ **/				ƥ<><C6A5>ָ<EFBFBD><D6B8><EFBFBD>ļ<EFBFBD><C4BC><EFBFBD>ģʽ(<28><><EFBFBD><EFBFBD>Ŀ¼)<tab>:Explore\ **/
+  menutrans Files\ Containing\ String\ Pattern\ (curdir\ only)<tab>:Explore\ *//	<09><><EFBFBD>ݰ<EFBFBD><EFBFBD><EFBFBD>ָ<EFBFBD><EFBFBD><EFBFBD>ַ<EFBFBD><EFBFBD><EFBFBD>ģʽ(<EFBFBD><EFBFBD>ǰĿ¼)<tab>:Explore\ *//
+  menutrans Files\ Containing\ String\ Pattern\ (+subdirs)<tab>:Explore\ **//		<09><><EFBFBD>ݰ<EFBFBD><EFBFBD><EFBFBD>ָ<EFBFBD><EFBFBD><EFBFBD>ַ<EFBFBD><EFBFBD><EFBFBD>ģʽ(<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ¼)<tab>:Explore\ **//
+  menutrans Next\ Match<tab>:Nexplore												<09><>һ<EFBFBD><EFBFBD>ƥ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><tab>:Nexplore
+  menutrans Prev\ Match<tab>:Pexplore												<09><>һ<EFBFBD><EFBFBD>ƥ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><tab>:Pexplore
+  " }}}
+  menutrans Make\ Subdirectory<tab>d		<09>½<EFBFBD><C2BD><EFBFBD>Ŀ¼<tab>d
+  menutrans Marked\ Files					ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(Marked)<EFBFBD>ļ<EFBFBD>
+  " Netrw.Marked Files menuitems {{{2
+  menutrans Mark\ File<tab>mf						ѡ<EFBFBD><EFBFBD>(Mark)/ȡ<EFBFBD><EFBFBD><tab>mf
+  menutrans Mark\ Files\ by\ Regexp<tab>mr			<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʽ(Regexp)ѡ<EFBFBD><EFBFBD><tab>mr
+  menutrans Hide-Show-List\ Control<tab>a			<09><><EFBFBD><EFBFBD>/<2F><>ʾ<tab>a
+  menutrans Copy\ To\ Target<tab>mc					<09><><EFBFBD>Ƶ<EFBFBD>Ŀ<EFBFBD><EFBFBD><tab>mc
+  menutrans Delete<tab>D							ɾ<EFBFBD><EFBFBD><tab>D
+  menutrans Diff<tab>md								<09><><EFBFBD><EFBFBD>(Diff)<tab>md
+  menutrans Edit<tab>me								<09>༭<tab>me
+  menutrans Exe\ Cmd<tab>mx							<09><>Ϊ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><tab>mx
+  menutrans Move\ To\ Target<tab>mm					<09>ƶ<EFBFBD><EFBFBD><EFBFBD>Ŀ<EFBFBD><EFBFBD><tab>mm
+  menutrans Obtain<tab>O							<09><>ȡ<tab>O
+  menutrans Print<tab>mp							<09><>ӡ<tab>mp
+  menutrans Replace<tab>R							<09>滻<tab>R
+  menutrans Set\ Target<tab>mt						<09><><EFBFBD><EFBFBD>Ŀ<EFBFBD><EFBFBD><tab>mt
+  menutrans Tag<tab>mT								<09><><EFBFBD>ɱ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>(Tags)<tab>mT
+  menutrans Zip/Unzip/Compress/Uncompress<tab>mz	ѹ<><D1B9>/<EFBFBD><EFBFBD>ѹ<EFBFBD><EFBFBD><tab>mz
+  " }}}
+  menutrans Obtain\ File<tab>O				<09><>ȡ<EFBFBD>ļ<EFBFBD><tab>O
+  menutrans Style							<09><>ʾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+  " Netrw.Style menuitems {{{2
+  menutrans Listing							<09>б<EFBFBD><EFBFBD><EFBFBD>ʽ
+  " Netrw.Style.Listing menuitems {{{3
+  menutrans thin<tab>i	<09><><EFBFBD><EFBFBD><thin)<tab>i
+  menutrans long<tab>i	<09><>ϸ(long)<tab>i
+  menutrans wide<tab>i	<09><><EFBFBD><EFBFBD>(wide)<tab>i
+  menutrans tree<tab>i	<09><>״(tree)<tab>i
+  " }}}
+  menutrans Normal-Hide-Show				<09><>ʾ/<2F><><EFBFBD><EFBFBD>
+  " Netrw.Style.Normal-Hide_show menuitems {{{3
+  menutrans Show\ All<tab>a		<09><>ʾȫ<EFBFBD><EFBFBD>
+  menutrans Normal<tab>a		<09><><EFBFBD><EFBFBD>ʾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>
+  menutrans Hidden\ Only<tab>a	ֻ<EFBFBD><EFBFBD>ʾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>
+  " }}}
+  menutrans Reverse\ Sorting\ Order<tab>r	<09><><EFBFBD><EFBFBD>/<2F><><EFBFBD><EFBFBD><tab>r
+  menutrans Sorting\ Method					<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʽ
+  " Netrw.Style.Sorting Method menuitems {{{3
+  menutrans Name<tab>s		<09>ļ<EFBFBD><EFBFBD><EFBFBD><tab>s
+  menutrans Time<tab>s  	<09>޸<EFBFBD>ʱ<EFBFBD><EFBFBD><tab>s
+  menutrans Size<tab>s  	<09><>С<tab>s
+  menutrans Exten<tab>s		<09><>չ<EFBFBD><EFBFBD><tab>s
+  " }}}
+  " }}}
+  menutrans Rename\ File/Directory<tab>R	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>/Ŀ¼<tab>R
+  menutrans Set\ Current\ Directory<tab>c	<09><><EFBFBD><EFBFBD>\ Vim\ <20><><EFBFBD><EFBFBD>Ŀ¼<tab>c
+  menutrans Targets							Ŀ<EFBFBD><EFBFBD>
+" endif
+" }}}
 
 let &cpo = s:keepcpo
 unlet s:keepcpo
+
+" vim: set nu ts=4 sw=4 noet fdm=marker fdc=4 :

runtime/lang/menu_tr.cp1254.vim

@@ -0,0 +1,3 @@
+" Menu Translations:	Turkish
+
+source <sfile>:p:h/menu_tr_tr.iso_8859-9.vim

runtime/lang/menu_tr.iso_8859-9.vim

@@ -0,0 +1,3 @@
+" Menu Translations:	Turkish
+
+source <sfile>:p:h/menu_tr_tr.iso_8859-9.vim

runtime/lang/menu_tr.utf-8.vim

@@ -0,0 +1,3 @@
+" Menu Translations:	Turkish
+
+source <sfile>:p:h/menu_tr_tr.utf-8.vim

runtime/lang/menu_tr_tr.cp1254.vim

@@ -0,0 +1,3 @@
+" Menu Translations:	Turkish
+
+source <sfile>:p:h/menu_tr_tr.iso_8859-9.vim

runtime/lang/menu_tr_tr.iso_8859-9.vim

@@ -0,0 +1,331 @@
+" Menu Translations:	Turkish
+" Maintainer:			Emir SARI <bitigchi@me.com>
+
+if exists("did_menu_trans")
+   finish
+endif
+let did_menu_trans = 1
+let s:keepcpo= &cpo
+set cpo&vim
+
+scriptencoding iso-8859-9
+
+" Top
+menutrans &File				&Dosya
+menutrans &Edit				Dü&zen
+menutrans &Tools			&Araçlar
+menutrans &Syntax			&Sözdizim
+menutrans &Buffers			A&rabellekler
+menutrans &Window			&Pencere
+menutrans &Help				&Yardım
+
+
+" Help menu
+menutrans &Overview<Tab><F1>	&Genel\ Bakış<Tab><F1>
+menutrans &User\ Manual			&Kullanım\ Kılavuzu
+menutrans &How-To\ Links		&Nasıl\ Yapılır?
+menutrans &Find\.\.\.			&Bul\.\.\.
+"--------------------
+menutrans &Credits			    &Teşekkürler
+menutrans Co&pying			    &Dağıtım
+menutrans &Sponsor/Register		&Sponsorluk/Kayıt
+menutrans O&rphans			    &Yetimler
+"--------------------
+menutrans &Version			    Sürüm\ &Bilgisi
+menutrans &About			    &Hakkında
+
+
+" File menu
+menutrans &Open\.\.\.<Tab>:e		    &Aç\.\.\.<Tab>:e
+menutrans Sp&lit-Open\.\.\.<Tab>:sp	    &Yeni\ Bölümde\ Aç\.\.\.<Tab>:sp
+menutrans Open\ Tab\.\.\.<Tab>:tabnew	S&ekme\ Aç\.\.\.<Tab>:tabnew
+menutrans &New<Tab>:enew		        Yeni\ &Sekme<Tab>:enew
+menutrans &Close<Tab>:close		        Ka&pat<Tab>:close
+"--------------------
+menutrans &Save<Tab>:w			        Ka&ydet<Tab>:w
+menutrans Save\ &As\.\.\.<Tab>:sav	    &Farklı Kaydet\.\.\.<Tab>:sav
+"--------------------
+menutrans Split\ &Diff\ With\.\.\.	    Ka&rşılaştır\.\.\.
+menutrans Split\ Patched\ &By\.\.\.	    Ya&malar\ Dahil\ Karşılaştır\.\.\.
+"--------------------
+menutrans &Print			            Ya&zdır
+menutrans Sa&ve-Exit<Tab>:wqa		    Kaydet\ &ve Çık<Tab>:wqa
+menutrans E&xit<Tab>:qa			        Çı&k<Tab>:qa
+
+
+" Edit menu
+menutrans &Undo<Tab>u			&Geri\ Al<Tab>u
+menutrans &Redo<Tab>^R			&Yinele<Tab>^R
+menutrans Rep&eat<Tab>\.		Son\ Komutu\ Y&inele<Tab>\.
+"--------------------
+menutrans Cu&t<Tab>"+x			&Kes<Tab>"+x
+menutrans &Copy<Tab>"+y			K&opyala<Tab>"+y
+menutrans &Paste<Tab>"+gP		Ya&pıştır<Tab>"+gP
+menutrans Put\ &Before<Tab>[p	Ö&nüne Koy<Tab>[p
+menutrans Put\ &After<Tab>]p	A&rkasına Koy<Tab>]p
+menutrans &Delete<Tab>x			Si&l<Tab>x
+menutrans &Select\ All<Tab>ggVG	Tü&münü\ Seç<Tab>ggVG
+"--------------------
+" Athena GUI only
+menutrans &Find<Tab>/			            &Bul<Tab>/
+menutrans Find\ and\ Rep&lace<Tab>:%s	    Bul\ &ve\ Değiştir<Tab>:%s
+" End Athena GUI only
+menutrans &Find\.\.\.<Tab>/		            &Bul\.\.\.<Tab>/
+menutrans Find\ and\ Rep&lace\.\.\.	        Bul\ ve\ &Değiştir\.\.\.
+menutrans Find\ and\ Rep&lace\.\.\.<Tab>:%s	Bul\ ve\ &Değiştir\.\.\.<Tab>:%s
+menutrans Find\ and\ Rep&lace\.\.\.<Tab>:s	Bul\ ve\ &Değiştir\.\.\.<Tab>:s
+"--------------------
+menutrans Settings\ &Window		&Ayarlar\ Penceresi
+menutrans Startup\ &Settings	Başlan&gıç\ Ayarları
+menutrans &Global\ Settings		Ge&nel\ Ayarlar
+menutrans F&ile\ Settings		&Dosya\ Ayarları
+menutrans C&olor\ Scheme		&Renk\ Düzeni
+menutrans &Keymap			    Düğme\ &Eşlem
+menutrans Select\ Fo&nt\.\.\.	Ya&zıtipi Seç\.\.\.
+">>>----------------- Edit/Global settings
+menutrans Toggle\ Pattern\ &Highlight<Tab>:set\ hls!        Dizgi\ &Vurgulamasını\ Aç/Kapat<Tab>:set\ hls!
+menutrans Toggle\ &Ignoring\ Case<Tab>:set\ ic!		        BÜYÜK/küçük\ Harf\ &Duyarsız\ Aç/Kapat<Tab>:set\ ic!
+menutrans Toggle\ &Showing\ Matched\ Pairs<Tab>:set\ sm!	Eş&leşen\ İkilileri\ Aç/Kapat<Tab>:set\ sm!
+menutrans &Context\ Lines				                    İ&mleçle\ Oynayan\ Satırlar
+menutrans &Virtual\ Edit				                    &Sanal\ Düzenleme
+menutrans Toggle\ Insert\ &Mode<Tab>:set\ im!		        Ekleme\ &Kipini\ Aç/Kapat<Tab>:set\ im!
+menutrans Toggle\ Vi\ C&ompatibility<Tab>:set\ cp!		    &Vi\ Uyumlu\ Kipi\ Aç/Kapat<Tab>:set\ cp!
+menutrans Search\ &Path\.\.\.				                &Arama\ Yolu\.\.\.
+menutrans Ta&g\ Files\.\.\.				                    &Etiket\ Dosyaları\.\.\.
+"
+menutrans Toggle\ &Toolbar				    &Araç\ Çubuğunu\ Aç/Kapat
+menutrans Toggle\ &Bottom\ Scrollbar		A&lt\ Kaydırma\ Çubuğunu\ Aç/Kapat
+menutrans Toggle\ &Left\ Scrollbar			&Sol\ Kaydırma\ Çubuğunu\ Aç/Kapat
+menutrans Toggle\ &Right\ Scrollbar		    S&ağ\ Kaydırma\ Çubuğunu\ Aç/Kapat  	
+">>>->>>------------- Edit/Global settings/Virtual edit
+menutrans Never					Kapalı
+menutrans Block\ Selection		Blok\ Seçimi
+menutrans Insert\ Mode			Ekleme\ Kipi
+menutrans Block\ and\ Insert	Blok\ Seçiminde\ ve\ Ekleme\ Kipinde
+menutrans Always				Her\ Zaman\ Açık
+">>>----------------- Edit/File settings
+menutrans Toggle\ Line\ &Numbering<Tab>:set\ nu!	        &Satır\ Numaralandırmayı\ Aç/Kapat<Tab>:set\ nu!
+menutrans Toggle\ Relati&ve\ Line\ Numbering<Tab>:set\ rnu!	&Göreceli\ Satır\ Numaralandırmayı\ Aç/Kapat<Tab>:set\ nru!
+menutrans Toggle\ &List\ Mode<Tab>:set\ list!		        Gö&rünmeyen\ Karakterleri\ Aç/Kapat<Tab>:set\ list!
+menutrans Toggle\ Line\ &Wrapping<Tab>:set\ wrap!	        Sa&tır\ Kaydırmayı\ Aç/Kapat<Tab>:set\ wrap!
+menutrans Toggle\ W&rapping\ at\ Word<Tab>:set\ lbr!	    Sö&zcük\ Kaydırmayı\ Aç/Kapat<Tab>:set\ lbr!
+menutrans Toggle\ Tab\ &Expanding-tab<Tab>:set\ et!	        S&ekmeleri\ Boşluklara\ Dönüştürmeyi\ Aç/Kapat<Tab>:set\ et!
+menutrans Toggle\ &Auto\ Indenting<Tab>:set\ ai!	        &Otomatik\ Girintilemeyi\ Aç/Kapat<Tab>:set\ ai!
+menutrans Toggle\ &C-Style\ Indenting<Tab>:set\ cin!	    &C\ Tarzı\ Girintilemeyi\ Aç/Kapat<Tab>:set\ cin!
+">>>---
+menutrans &Shiftwidth			&Girinti\ Düzeyi
+menutrans Soft\ &Tabstop		&Sekme\ Genişliği
+menutrans Te&xt\ Width\.\.\.	&Metin\ Genişliği\.\.\.
+menutrans &File\ Format\.\.\.	&Dosya\ Biçimi\.\.\.
+"
+"
+"
+" Tools menu
+menutrans &Jump\ to\ This\ Tag<Tab>g^]		Ş&u\ Etikete\ Atla<Tab>g^]
+menutrans Jump\ &Back<Tab>^T				&Geri\ Dön<Tab>^T
+menutrans Build\ &Tags\ File				&Etiket\ Dosyası\ Oluştur
+"-------------------
+menutrans &Folding					&Kıvırmalar
+menutrans &Spelling					&Yazım\ Denetimi
+menutrans &Diff						&Ayrımlar\ (diff)
+"-------------------
+menutrans &Make<Tab>:make						&Derle<Tab>:make
+menutrans &List\ Errors<Tab>:cl					&Hataları\ Listele<Tab>:cl
+menutrans L&ist\ Messages<Tab>:cl!				Ä°&letileri\ Listele<Tab>:cl!
+menutrans &Next\ Error<Tab>:cn					Bir\ &Sonraki\ Hata<Tab>:cn
+menutrans &Previous\ Error<Tab>:cp				Bir\ Ö&nceki\ Hata<Tab>:cp
+menutrans &Older\ List<Tab>:cold				Daha\ &Eski\ Hatalar<Tab>:cold
+menutrans N&ewer\ List<Tab>:cnew				Daha\ &Yeni\ Hatalar<Tab>:cnew
+menutrans Error\ &Window						Hatalar\ &Penceresi
+menutrans Se&t\ Compiler						De&rleyici\ Seç
+menutrans Show\ Compiler\ Se&ttings\ in\ Menu	Derleyici\ Ayarlarını\ Menüde\ &Göster 
+"-------------------
+menutrans &Convert\ to\ HEX<Tab>:%!xxd			HEX'e\ Dö&nüştür<Tab>:%!xxd
+menutrans Conve&rt\ Back<Tab>:%!xxd\ -r			HEX'&ten\ Dönüştür<Tab>:%!xxd\ -r
+">>>---------------- Tools/Spelling
+menutrans &Spell\ Check\ On						Yazım\ Denetimini\ &Aç
+menutrans Spell\ Check\ &Off					Yazım\ Denetimini\ &Kapat
+menutrans To\ &Next\ Error<Tab>]s				Bir\ &Sonraki\ Hata<Tab>]s
+menutrans To\ &Previous\ Error<Tab>[s			Bir\ Ö&nceki\ Hata<Tab>[s
+menutrans Suggest\ &Corrections<Tab>z=			Dü&zeltme\ Öner<Tab>z=
+menutrans &Repeat\ Correction<Tab>:spellrepall	Düzeltmeyi\ &Yinele<Tab>spellrepall
+"-------------------
+menutrans Set\ Language\ to\ "en"		Dili\ "en"\ yap
+menutrans Set\ Language\ to\ "en_au"	Dili\ "en_au"\ yap
+menutrans Set\ Language\ to\ "en_ca"	Dili\ "en_ca"\ yap
+menutrans Set\ Language\ to\ "en_gb"	Dili\ "en_gb"\ yap
+menutrans Set\ Language\ to\ "en_nz"	Dili\ "en_nz"\ yap
+menutrans Set\ Language\ to\ "en_us"	Dili\ "en_us"\ yap
+menutrans &Find\ More\ Languages		&Başka\ Diller\ Bul
+let g:menutrans_set_lang_to =			'Dil Yükle'
+"
+"
+" The Spelling popup menu
+"
+"
+let g:menutrans_spell_change_ARG_to =			'Düzeltilecek:\ "%s"\ ->'
+let g:menutrans_spell_add_ARG_to_word_list =	'"%s"\ sözcüğünü\ sözlüğe\ ekle'
+let g:menutrans_spell_ignore_ARG =				'"%s"\ sözcüğünü\ yoksay'
+">>>---------------- Folds
+menutrans &Enable/Disable\ Folds<Tab>zi			&Kıvırmaları\ Aç/Kapat<Tab>zi
+menutrans &View\ Cursor\ Line<Tab>zv			İ&mlecin\ Olduğu\ Satırı\ Görüntüle<Tab>zv
+menutrans Vie&w\ Cursor\ Line\ Only<Tab>zMzx	Ya&lnızca\ İmlecin\ Olduğu\ Satırı\ Görüntüle<Tab>zMzx
+menutrans C&lose\ More\ Folds<Tab>zm			&Daha\ Fazla\ Kıvırma\ Kapat<Tab>zm
+menutrans &Close\ All\ Folds<Tab>zM				Bütün\ Kı&vırmaları\ Kapat<Tab>zM
+menutrans &Open\ All\ Folds<Tab>zR				Bü&tün\ Kıvırmaları\ Aç<Tab>zR
+menutrans O&pen\ More\ Folds<Tab>zr				D&aha\ Fazla\ Kıvırma\ Aç<Tab>zr
+menutrans Fold\ Met&hod							Kıvı&rma\ Yöntemi
+menutrans Create\ &Fold<Tab>zf					Kıvırma\ &Oluştur<Tab>zf
+menutrans &Delete\ Fold<Tab>zd					Kıvırma\ &Sil<Tab>zd
+menutrans Delete\ &All\ Folds<Tab>zD			Tü&m\ Kıvırmaları\ Sil<Tab>zD
+menutrans Fold\ col&umn\ Width					Kıvırma\ Sütunu\ &Genişliği
+">>>->>>----------- Tools/Folds/Fold Method
+menutrans M&anual		&El\ Ä°le
+menutrans I&ndent		&Girinti
+menutrans E&xpression	Ä°&fade
+menutrans S&yntax		&Sözdizim
+menutrans Ma&rker		Ä°&mleyici
+">>>--------------- Tools/Diff
+menutrans &Update		&Güncelle
+menutrans &Get\ Block	Bloğu\ &Al
+menutrans &Put\ Block	Bloğu\ &Koy
+">>>--------------- Tools/Diff/Error window
+menutrans &Update<Tab>:cwin		&Güncelle<Tab>:cwin
+menutrans &Close<Tab>:cclose	&Kapat<Tab>:cclose
+menutrans &Open<Tab>:copen		&Aç<Tab>:copen
+"
+"
+" Syntax menu
+"
+menutrans &Show\ File\ Types\ in\ Menu		Dosya\ Türlerini\ Menüde\ &Göster
+menutrans Set\ '&syntax'\ only				Yalnızca\ 'syntax'\ &Ayarla
+menutrans Set\ '&filetype'\ too				'filetype'\ İçin\ &de\ Ayarla
+menutrans &Off								&Kapat
+menutrans &Manual							&El\ Ä°le
+menutrans A&utomatic						&Otomatik
+menutrans On/Off\ for\ &This\ File			&Bu\ Dosya\ İçin\ Aç/Kapat
+menutrans Co&lor\ Test						&Renk\ Testi
+menutrans &Highlight\ Test					&Vurgulama\ Testi
+menutrans &Convert\ to\ HTML				&HTML'ye\ Dönüştür
+"
+"
+" Buffers menu
+"
+menutrans &Refresh\ menu	&Menüyü\ Güncelle
+menutrans Delete			&Sil
+menutrans &Alternate		Ö&teki
+menutrans &Next				So&nraki
+menutrans &Previous			Ön&ceki
+menutrans [No\ File]		[Dosya\ Yok]
+"
+"
+" Window menu
+"
+menutrans &New<Tab>^Wn					Yeni\ &Pencere<Tab>^Wn
+menutrans S&plit<Tab>^Ws				Pencereyi\ &Böl<Tab>^Ws
+menutrans Sp&lit\ To\ #<Tab>^W^^		Pencereyi\ Başkasına\ Bö&l<Tab>^W^^
+menutrans Split\ &Vertically<Tab>^Wv	Pencereyi\ &Dikey\ Olarak\ Böl<Tab>^Wv
+menutrans Split\ File\ E&xplorer		Yeni\ Bölü&mde\ Dosya\ Gezginini\ Aç
+"
+menutrans &Close<Tab>^Wc				Pen&cereyi\ Kapat<Tab>^Wc
+menutrans Close\ &Other(s)<Tab>^Wo		Diğer\ Pencerele&ri\ Kapat<Tab>^Wo
+"
+menutrans Move\ &To						&Taşı
+menutrans Rotate\ &Up<Tab>^WR			&Yukarı\ Taşı<Tab>^WR
+menutrans Rotate\ &Down<Tab>^Wr			&Aşağı\ Taşı<Tab>^Wr
+"
+menutrans &Equal\ Size<Tab>^W=			&Eşit\ Boyut<Tab>^W=
+menutrans &Max\ Height<Tab>^W_			E&n\ Büyük\ Yükseklik<Tab>^W_
+menutrans M&in\ Height<Tab>^W1_			En\ Küçük\ Yüksekl&ik<Tab>^W1_
+menutrans Max\ &Width<Tab>^W\|			En\ Büyük\ Gen&işlik<Tab>^W\|
+menutrans Min\ Widt&h<Tab>^W1\|			En\ Küçük\ Geniş&lik<Tab>^W1\|
+">>>----------------- Window/Move To
+menutrans &Top<Tab>^WK					&Yukarı<Tab>^WK
+menutrans &Bottom<Tab>^WJ				&Aşağı<Tab>^WJ
+menutrans &Left\ Side<Tab>^WH			So&la<Tab>^WH
+menutrans &Right\ Side<Tab>^WL			&Sağa<Tab>^WL
+"
+"
+" The popup menu
+"
+"
+menutrans &Undo					&Geri\ Al
+menutrans Cu&t					&Kes
+menutrans &Copy					K&opyala
+menutrans &Paste				&Yapıştır
+menutrans &Delete				&Sil
+menutrans Select\ Blockwise		&Blok\ Biçiminde\ Seç
+menutrans Select\ &Word			Sö&zcük\ Seç
+menutrans Select\ &Sentence		&Tümce\ Seç
+menutrans Select\ Pa&ragraph	&Paragraf\ Seç
+menutrans Select\ &Line			S&atır\ Seç
+menutrans Select\ &Block		Bl&ok\ Seç
+menutrans Select\ &All			Tümü&nü\ Seç
+"
+" The GUI toolbar
+"
+if has("toolbar")
+  if exists("*Do_toolbar_tmenu")
+    delfun Do_toolbar_tmenu
+  endif
+  fun Do_toolbar_tmenu()
+    tmenu ToolBar.Open			Dosya Aç
+    tmenu ToolBar.Save			Dosya Kaydet
+    tmenu ToolBar.SaveAll		Tüm Dosyaları Kaydet
+    tmenu ToolBar.Print			Yazdır
+    tmenu ToolBar.Undo			Geri Al
+    tmenu ToolBar.Redo			Yinele
+    tmenu ToolBar.Cut			Kes
+    tmenu ToolBar.Copy			Kopyala
+    tmenu ToolBar.Paste			Yapıştır
+	tmenu ToolBar.Find			Bul...
+    tmenu ToolBar.FindNext		Sonrakini Bul
+    tmenu ToolBar.FindPrev		Öncekini Bul
+    tmenu ToolBar.Replace		Bul ve Değiştir...
+    if 0	" disabled; These are in the Windows menu
+      tmenu ToolBar.New			Yeni Pencere
+      tmenu ToolBar.WinSplit	Pencereyi Böl
+      tmenu ToolBar.WinMax		En Büyük Pencere Yüksekliği
+      tmenu ToolBar.WinMin		En Küçük Pencere Yüksekliği
+      tmenu ToolBar.WinClose	Pencereyi Kapat
+    endif
+    tmenu ToolBar.LoadSesn		Oturum Yükle
+    tmenu ToolBar.SaveSesn		Oturum Kaydet
+    tmenu ToolBar.RunScript		Betik Çalıştır
+    tmenu ToolBar.Make			Derle
+    tmenu ToolBar.Shell			Kabuk
+    tmenu ToolBar.RunCtags		Etiket Dosyası Oluştur
+    tmenu ToolBar.TagJump		Etikete Atla
+    tmenu ToolBar.Help			Yardım
+    tmenu ToolBar.FindHelp		Yardım Bul
+  endfun
+endif
+"
+"
+" Dialog texts
+"
+" Find in help dialog
+"
+let g:menutrans_help_dialog = "Yardım için komut veya sözcük girin:\n\nEkleme Kipi komutlarını aramak için i_ ekleyin (örneğin i_CTRL-X)\nNormal Kip komutlarını aramak için _c ekleyin (örneğin с_<Del>)\nSeçenekler hakkında yardım almak için ' ekleyin (örneğin 'shiftwidth')"
+"
+" Searh path dialog
+"
+let g:menutrans_path_dialog = "Dosya araması için yol belirtin.\nDizin adları virgüllerle ayrılır."
+"
+" Tag files dialog
+"
+let g:menutrans_tags_dialog = "Etiket dosyası adları belirtin (virgülle ayırarak).\n"
+"
+" Text width dialog
+"
+let g:menutrans_textwidth_dialog = "Biçimlendirme için metin genişliğini belirtin.\nBiçimlendirme iptali için 0 girin."
+"
+" File format dialog
+"
+let g:menutrans_fileformat_dialog = "Dosya biçimi seçin"
+let g:menutrans_fileformat_choices = "&Unix\n&Dos\n&Mac\nÄ°&ptal"
+"
+let menutrans_no_file = "[Dosya Yok]"
+
+let &cpo = s:keepcpo
+unlet s:keepcpo

runtime/lang/menu_tr_tr.utf-8.vim

@@ -0,0 +1,331 @@
+" Menu Translations:	Turkish
+" Maintainer:			Emir SARI <bitigchi@me.com>
+
+if exists("did_menu_trans")
+   finish
+endif
+let did_menu_trans = 1
+let s:keepcpo= &cpo
+set cpo&vim
+
+scriptencoding utf-8
+
+" Top
+menutrans &File				&Dosya
+menutrans &Edit				Dü&zen
+menutrans &Tools			&Araçlar
+menutrans &Syntax			&Sözdizim
+menutrans &Buffers			A&rabellekler
+menutrans &Window			&Pencere
+menutrans &Help				&Yardım
+
+
+" Help menu
+menutrans &Overview<Tab><F1>	&Genel\ Bakış<Tab><F1>
+menutrans &User\ Manual			&Kullanım\ Kılavuzu
+menutrans &How-To\ Links		&Nasıl\ Yapılır?
+menutrans &Find\.\.\.			&Bul\.\.\.
+"--------------------
+menutrans &Credits			    &Teşekkürler
+menutrans Co&pying			    &Dağıtım
+menutrans &Sponsor/Register		&Sponsorluk/Kayıt
+menutrans O&rphans			    &Yetimler
+"--------------------
+menutrans &Version			    Sürüm\ &Bilgisi
+menutrans &About			    &Hakkında
+
+
+" File menu
+menutrans &Open\.\.\.<Tab>:e		    &Aç\.\.\.<Tab>:e
+menutrans Sp&lit-Open\.\.\.<Tab>:sp	    &Yeni\ Bölümde\ Aç\.\.\.<Tab>:sp
+menutrans Open\ Tab\.\.\.<Tab>:tabnew	S&ekme\ Aç\.\.\.<Tab>:tabnew
+menutrans &New<Tab>:enew		        Yeni\ &Sekme<Tab>:enew
+menutrans &Close<Tab>:close		        Ka&pat<Tab>:close
+"--------------------
+menutrans &Save<Tab>:w			        Kayde&t<Tab>:w
+menutrans Save\ &As\.\.\.<Tab>:sav	    &Farklı Kaydet\.\.\.<Tab>:sav
+"--------------------
+menutrans Split\ &Diff\ With\.\.\.	    Ka&rşılaştır\.\.\.
+menutrans Split\ Patched\ &By\.\.\.	    Ya&malar\ Dahil\ Karşılaştır\.\.\.
+"--------------------
+menutrans &Print			            Ya&zdır
+menutrans Sa&ve-Exit<Tab>:wqa		    Kaydet\ &ve Çık<Tab>:wqa
+menutrans E&xit<Tab>:qa			        Çı&k<Tab>:qa
+
+
+" Edit menu
+menutrans &Undo<Tab>u			&Geri\ Al<Tab>u
+menutrans &Redo<Tab>^R			&Yinele<Tab>^R
+menutrans Rep&eat<Tab>\.		Son\ Komutu\ Y&inele<Tab>\.
+"--------------------
+menutrans Cu&t<Tab>"+x			&Kes<Tab>"+x
+menutrans &Copy<Tab>"+y			K&opyala<Tab>"+y
+menutrans &Paste<Tab>"+gP		Ya&pıştır<Tab>"+gP
+menutrans Put\ &Before<Tab>[p	Ö&nüne Koy<Tab>[p
+menutrans Put\ &After<Tab>]p	A&rkasına Koy<Tab>]p
+menutrans &Delete<Tab>x			Si&l<Tab>x
+menutrans &Select\ All<Tab>ggVG	Tü&münü\ Seç<Tab>ggVG
+"--------------------
+" Athena GUI only
+menutrans &Find<Tab>/			            &Bul<Tab>/
+menutrans Find\ and\ Rep&lace<Tab>:%s	    Bul\ &ve\ Değiştir<Tab>:%s
+" End Athena GUI only
+menutrans &Find\.\.\.<Tab>/		            &Bul\.\.\.<Tab>/
+menutrans Find\ and\ Rep&lace\.\.\.	        Bul\ ve\ &Değiştir\.\.\.
+menutrans Find\ and\ Rep&lace\.\.\.<Tab>:%s	Bul\ ve\ &Değiştir\.\.\.<Tab>:%s
+menutrans Find\ and\ Rep&lace\.\.\.<Tab>:s	Bul\ ve\ &Değiştir\.\.\.<Tab>:s
+"--------------------
+menutrans Settings\ &Window		&Ayarlar\ Penceresi
+menutrans Startup\ &Settings	Başlan&gıç\ Ayarları
+menutrans &Global\ Settings		Ge&nel\ Ayarlar
+menutrans F&ile\ Settings		&Dosya\ Ayarları
+menutrans C&olor\ Scheme		&Renk\ Düzeni
+menutrans &Keymap			    Düğme\ &Eşlem
+menutrans Select\ Fo&nt\.\.\.	Ya&zıtipi Seç\.\.\.
+">>>----------------- Edit/Global settings
+menutrans Toggle\ Pattern\ &Highlight<Tab>:set\ hls!        Dizgi\ &Vurgulamasını\ Aç/Kapat<Tab>:set\ hls!
+menutrans Toggle\ &Ignoring\ Case<Tab>:set\ ic!		        BÜYÜK/küçük\ Harf\ &Duyarlı\ Aç/Kapat<Tab>:set\ ic!
+menutrans Toggle\ &Showing\ Matched\ Pairs<Tab>:set\ sm!	Eş&leşen\ İkilileri\ Aç/Kapat<Tab>:set\ sm!
+menutrans &Context\ Lines				                    İ&mleçle\ Oynayan\ Satırlar
+menutrans &Virtual\ Edit				                    &Sanal\ Düzenleme
+menutrans Toggle\ Insert\ &Mode<Tab>:set\ im!		        Ekleme\ &Kipini\ Aç/Kapat<Tab>:set\ im!
+menutrans Toggle\ Vi\ C&ompatibility<Tab>:set\ cp!		    &Vi\ Uyumlu\ Kipi\ Aç/Kapat<Tab>:set\ cp!
+menutrans Search\ &Path\.\.\.				                &Arama\ Yolu\.\.\.
+menutrans Ta&g\ Files\.\.\.				                    &Etiket\ Dosyaları\.\.\.
+"
+menutrans Toggle\ &Toolbar				    &Araç\ Çubuğunu\ Aç/Kapat
+menutrans Toggle\ &Bottom\ Scrollbar		A&lt\ Kaydırma\ Çubuğunu\ Aç/Kapat
+menutrans Toggle\ &Left\ Scrollbar			&Sol\ Kaydırma\ Çubuğunu\ Aç/Kapat
+menutrans Toggle\ &Right\ Scrollbar		    S&ağ\ Kaydırma\ Çubuğunu\ Aç/Kapat  	
+">>>->>>------------- Edit/Global settings/Virtual edit
+menutrans Never					Kapalı
+menutrans Block\ Selection		Blok\ Seçimi
+menutrans Insert\ Mode			Ekleme\ Kipi
+menutrans Block\ and\ Insert	Blok\ Seçiminde\ ve\ Ekleme\ Kipinde
+menutrans Always				Her\ Zaman\ Açık
+">>>----------------- Edit/File settings
+menutrans Toggle\ Line\ &Numbering<Tab>:set\ nu!	        &Satır\ Numaralandırmayı\ Aç/Kapat<Tab>:set\ nu!
+menutrans Toggle\ Relati&ve\ Line\ Numbering<Tab>:set\ rnu!	&Göreceli\ Satır\ Numaralandırmayı\ Aç/Kapat<Tab>:set\ nru!
+menutrans Toggle\ &List\ Mode<Tab>:set\ list!		        Gö&rünmeyen\ Karakterleri\ Aç/Kapat<Tab>:set\ list!
+menutrans Toggle\ Line\ &Wrapping<Tab>:set\ wrap!	        Sa&tır\ Kaydırmayı\ Aç/Kapat<Tab>:set\ wrap!
+menutrans Toggle\ W&rapping\ at\ Word<Tab>:set\ lbr!	    Sö&zcük\ Kaydırmayı\ Aç/Kapat<Tab>:set\ lbr!
+menutrans Toggle\ Tab\ &Expanding-tab<Tab>:set\ et!	        S&ekmeleri\ Boşluklara\ Dönüştürmeyi\ Aç/Kapat<Tab>:set\ et!
+menutrans Toggle\ &Auto\ Indenting<Tab>:set\ ai!	        &Otomatik\ Girintilemeyi\ Aç/Kapat<Tab>:set\ ai!
+menutrans Toggle\ &C-Style\ Indenting<Tab>:set\ cin!	    &C\ Tarzı\ Girintilemeyi\ Aç/Kapat<Tab>:set\ cin!
+">>>---
+menutrans &Shiftwidth			&Girinti\ Düzeyi
+menutrans Soft\ &Tabstop		&Sekme\ Genişliği
+menutrans Te&xt\ Width\.\.\.	&Metin\ Genişliği\.\.\.
+menutrans &File\ Format\.\.\.	&Dosya\ Biçimi\.\.\.
+"
+"
+"
+" Tools menu
+menutrans &Jump\ to\ This\ Tag<Tab>g^]		Ş&u\ Etikete\ Atla<Tab>g^]
+menutrans Jump\ &Back<Tab>^T				&Geri\ Dön<Tab>^T
+menutrans Build\ &Tags\ File				&Etiket\ Dosyası\ Oluştur
+"-------------------
+menutrans &Folding					&Kıvırmalar
+menutrans &Spelling					&Yazım\ Denetimi
+menutrans &Diff						&Ayrımlar\ (diff)
+"-------------------
+menutrans &Make<Tab>:make						&Derle<Tab>:make
+menutrans &List\ Errors<Tab>:cl					&Hataları\ Listele<Tab>:cl
+menutrans L&ist\ Messages<Tab>:cl!				İ&letileri\ Listele<Tab>:cl!
+menutrans &Next\ Error<Tab>:cn					Bir\ &Sonraki\ Hata<Tab>:cn
+menutrans &Previous\ Error<Tab>:cp				Bir\ Ö&nceki\ Hata<Tab>:cp
+menutrans &Older\ List<Tab>:cold				Daha\ &Eski\ Hatalar<Tab>:cold
+menutrans N&ewer\ List<Tab>:cnew				Daha\ &Yeni\ Hatalar<Tab>:cnew
+menutrans Error\ &Window						Hatalar\ &Penceresi
+menutrans Se&t\ Compiler						De&rleyici\ Seç
+menutrans Show\ Compiler\ Se&ttings\ in\ Menu	Derleyici\ Ayarlarını\ Menüde\ &Göster 
+"-------------------
+menutrans &Convert\ to\ HEX<Tab>:%!xxd			HEX'e\ Dö&nüştür<Tab>:%!xxd
+menutrans Conve&rt\ Back<Tab>:%!xxd\ -r			HEX'&ten\ Dönüştür<Tab>:%!xxd\ -r
+">>>---------------- Tools/Spelling
+menutrans &Spell\ Check\ On						Yazım\ Denetimini\ &Aç
+menutrans Spell\ Check\ &Off					Yazım\ Denetimini\ &Kapat
+menutrans To\ &Next\ Error<Tab>]s				Bir\ &Sonraki\ Hata<Tab>]s
+menutrans To\ &Previous\ Error<Tab>[s			Bir\ Ö&nceki\ Hata<Tab>[s
+menutrans Suggest\ &Corrections<Tab>z=			Dü&zeltme\ Öner<Tab>z=
+menutrans &Repeat\ Correction<Tab>:spellrepall	Düzeltmeyi\ &Yinele<Tab>spellrepall
+"-------------------
+menutrans Set\ Language\ to\ "en"		Dili\ "en"\ yap
+menutrans Set\ Language\ to\ "en_au"	Dili\ "en_au"\ yap
+menutrans Set\ Language\ to\ "en_ca"	Dili\ "en_ca"\ yap
+menutrans Set\ Language\ to\ "en_gb"	Dili\ "en_gb"\ yap
+menutrans Set\ Language\ to\ "en_nz"	Dili\ "en_nz"\ yap
+menutrans Set\ Language\ to\ "en_us"	Dili\ "en_us"\ yap
+menutrans &Find\ More\ Languages		&Başka\ Diller\ Bul
+let g:menutrans_set_lang_to =			'Dil Yükle'
+"
+"
+" The Spelling popup menu
+"
+"
+let g:menutrans_spell_change_ARG_to =			'Düzeltilecek:\ "%s"\ ->'
+let g:menutrans_spell_add_ARG_to_word_list =	'"%s"\ sözcüğünü\ sözlüğe\ ekle'
+let g:menutrans_spell_ignore_ARG =				'"%s"\ sözcüğünü\ yoksay'
+">>>---------------- Folds
+menutrans &Enable/Disable\ Folds<Tab>zi			&Kıvırmaları\ Aç/Kapat<Tab>zi
+menutrans &View\ Cursor\ Line<Tab>zv			İ&mlecin\ Olduğu\ Satırı\ Görüntüle<Tab>zv
+menutrans Vie&w\ Cursor\ Line\ Only<Tab>zMzx	Ya&lnızca\ İmlecin\ Olduğu\ Satırı\ Görüntüle<Tab>zMzx
+menutrans C&lose\ More\ Folds<Tab>zm			&Daha\ Fazla\ Kıvırma\ Kapat<Tab>zm
+menutrans &Close\ All\ Folds<Tab>zM				Bütün\ Kı&vırmaları\ Kapat<Tab>zM
+menutrans &Open\ All\ Folds<Tab>zR				Bü&tün\ Kıvırmaları\ Aç<Tab>zR
+menutrans O&pen\ More\ Folds<Tab>zr				D&aha\ Fazla\ Kıvırma\ Aç<Tab>zr
+menutrans Fold\ Met&hod							Kıvı&rma\ Yöntemi
+menutrans Create\ &Fold<Tab>zf					Kıvırma\ &Oluştur<Tab>zf
+menutrans &Delete\ Fold<Tab>zd					Kıvırma\ &Sil<Tab>zd
+menutrans Delete\ &All\ Folds<Tab>zD			Tü&m\ Kıvırmaları\ Sil<Tab>zD
+menutrans Fold\ col&umn\ Width					Kıvırma\ Sütunu\ &Genişliği
+">>>->>>----------- Tools/Folds/Fold Method
+menutrans M&anual		&El\ İle
+menutrans I&ndent		&Girinti
+menutrans E&xpression	İ&fade
+menutrans S&yntax		&Sözdizim
+menutrans Ma&rker		İ&mleyici
+">>>--------------- Tools/Diff
+menutrans &Update		&Güncelle
+menutrans &Get\ Block	Bloğu\ &Al
+menutrans &Put\ Block	Bloğu\ &Koy
+">>>--------------- Tools/Diff/Error window
+menutrans &Update<Tab>:cwin		&Güncelle<Tab>:cwin
+menutrans &Close<Tab>:cclose	&Kapat<Tab>:cclose
+menutrans &Open<Tab>:copen		&Aç<Tab>:copen
+"
+"
+" Syntax menu
+"
+menutrans &Show\ File\ Types\ in\ Menu		Dosya\ Türlerini\ Menüde\ &Göster
+menutrans Set\ '&syntax'\ only				Yalnızca\ 'syntax'\ &Ayarla
+menutrans Set\ '&filetype'\ too				'filetype'\ İçin\ &de\ Ayarla
+menutrans &Off								&Kapat
+menutrans &Manual							&El\ İle
+menutrans A&utomatic						&Otomatik
+menutrans On/Off\ for\ &This\ File			&Bu\ Dosya\ İçin\ Aç/Kapat
+menutrans Co&lor\ Test						&Renk\ Testi
+menutrans &Highlight\ Test					&Vurgulama\ Testi
+menutrans &Convert\ to\ HTML				&HTML'ye\ Dönüştür
+"
+"
+" Buffers menu
+"
+menutrans &Refresh\ menu	&Menüyü\ Güncelle
+menutrans Delete			&Sil
+menutrans &Alternate		Ö&teki
+menutrans &Next				So&nraki
+menutrans &Previous			Ön&ceki
+menutrans [No\ File]		[Dosya\ Yok]
+"
+"
+" Window menu
+"
+menutrans &New<Tab>^Wn					Yeni\ &Pencere<Tab>^Wn
+menutrans S&plit<Tab>^Ws				Pencereyi\ &Böl<Tab>^Ws
+menutrans Sp&lit\ To\ #<Tab>^W^^		Pencereyi\ Başkasına\ Bö&l<Tab>^W^^
+menutrans Split\ &Vertically<Tab>^Wv	Pencereyi\ &Dikey\ Olarak\ Böl<Tab>^Wv
+menutrans Split\ File\ E&xplorer		Yeni\ Bölü&mde\ Dosya\ Gezginini\ Aç
+"
+menutrans &Close<Tab>^Wc				Pen&cereyi\ Kapat<Tab>^Wc
+menutrans Close\ &Other(s)<Tab>^Wo		Diğer\ Pencerele&ri\ Kapat<Tab>^Wo
+"
+menutrans Move\ &To						&Taşı
+menutrans Rotate\ &Up<Tab>^WR			&Yukarı\ Taşı<Tab>^WR
+menutrans Rotate\ &Down<Tab>^Wr			&Aşağı\ Taşı<Tab>^Wr
+"
+menutrans &Equal\ Size<Tab>^W=			&Eşit\ Boyut<Tab>^W=
+menutrans &Max\ Height<Tab>^W_			E&n\ Büyük\ Yükseklik<Tab>^W_
+menutrans M&in\ Height<Tab>^W1_			En\ Küçük\ Yüksekl&ik<Tab>^W1_
+menutrans Max\ &Width<Tab>^W\|			En\ Büyük\ Gen&işlik<Tab>^W\|
+menutrans Min\ Widt&h<Tab>^W1\|			En\ Küçük\ Genişli&k<Tab>^W1\|
+">>>----------------- Window/Move To
+menutrans &Top<Tab>^WK					&Yukarı<Tab>^WK
+menutrans &Bottom<Tab>^WJ				&Aşağı<Tab>^WJ
+menutrans &Left\ Side<Tab>^WH			So&la<Tab>^WH
+menutrans &Right\ Side<Tab>^WL			&Sağa<Tab>^WL
+"
+"
+" The popup menu
+"
+"
+menutrans &Undo					&Geri\ Al
+menutrans Cu&t					&Kes
+menutrans &Copy					K&opyala
+menutrans &Paste				&Yapıştır
+menutrans &Delete				&Sil
+menutrans Select\ Blockwise		&Blok\ Biçiminde\ Seç
+menutrans Select\ &Word			Sö&zcük\ Seç
+menutrans Select\ &Sentence		&Tümce\ Seç
+menutrans Select\ Pa&ragraph	&Paragraf\ Seç
+menutrans Select\ &Line			S&atır\ Seç
+menutrans Select\ &Block		Bl&ok\ Seç
+menutrans Select\ &All			Tümü&nü\ Seç
+"
+" The GUI toolbar
+"
+if has("toolbar")
+  if exists("*Do_toolbar_tmenu")
+    delfun Do_toolbar_tmenu
+  endif
+  fun Do_toolbar_tmenu()
+    tmenu ToolBar.Open			Dosya Aç
+    tmenu ToolBar.Save			Dosya Kaydet
+    tmenu ToolBar.SaveAll		Tüm Dosyaları Kaydet
+    tmenu ToolBar.Print			Yazdır
+    tmenu ToolBar.Undo			Geri Al
+    tmenu ToolBar.Redo			Yinele
+    tmenu ToolBar.Cut			Kes
+    tmenu ToolBar.Copy			Kopyala
+    tmenu ToolBar.Paste			Yapıştır
+	tmenu ToolBar.Find			Bul...
+    tmenu ToolBar.FindNext		Sonrakini Bul
+    tmenu ToolBar.FindPrev		Öncekini Bul
+    tmenu ToolBar.Replace		Bul ve Değiştir...
+    if 0	" disabled; These are in the Windows menu
+      tmenu ToolBar.New			Yeni Pencere
+      tmenu ToolBar.WinSplit	Pencereyi Böl
+      tmenu ToolBar.WinMax		En Büyük Pencere Yüksekliği
+      tmenu ToolBar.WinMin		En Küçük Pencere Yüksekliği
+      tmenu ToolBar.WinClose	Pencereyi Kapat
+    endif
+    tmenu ToolBar.LoadSesn		Oturum Yükle
+    tmenu ToolBar.SaveSesn		Oturum Kaydet
+    tmenu ToolBar.RunScript		Betik Çalıştır
+    tmenu ToolBar.Make			Derle
+    tmenu ToolBar.Shell			Kabuk
+    tmenu ToolBar.RunCtags		Etiket Dosyası Oluştur
+    tmenu ToolBar.TagJump		Etikete Atla
+    tmenu ToolBar.Help			Yardım
+    tmenu ToolBar.FindHelp		Yardım Bul
+  endfun
+endif
+"
+"
+" Dialog texts
+"
+" Find in help dialog
+"
+let g:menutrans_help_dialog = "Yardım için komut veya sözcük girin:\n\nEkleme Kipi komutlarını aramak için i_ ekleyin (örneğin i_CTRL-X)\nNormal Kip komutlarını aramak için _c ekleyin (örneğin с_<Del>)\nSeçenekler hakkında yardım almak için ' ekleyin (örneğin 'shiftwidth')"
+"
+" Searh path dialog
+"
+let g:menutrans_path_dialog = "Dosya araması için yol belirtin.\nDizin adları virgüllerle ayrılır."
+"
+" Tag files dialog
+"
+let g:menutrans_tags_dialog = "Etiket dosyası adları belirtin (virgülle ayırarak).\n"
+"
+" Text width dialog
+"
+let g:menutrans_textwidth_dialog = "Biçimlendirme için metin genişliğini belirtin.\nBiçimlendirme iptali için 0 girin."
+"
+" File format dialog
+"
+let g:menutrans_fileformat_dialog = "Dosya biçimi seçin"
+let g:menutrans_fileformat_choices = "&Unix\n&Dos\n&Mac\nİ&ptal"
+"
+let menutrans_no_file = "[Dosya Yok]"
+
+let &cpo = s:keepcpo
+unlet s:keepcpo

runtime/lang/menu_zh_cn.gb2312.vim

@@ -1,273 +1,13 @@
 " Menu Translations:    Simplified Chinese
 " Maintainer:           Shun Bai <baishunde@gmail.com>
 " Previous Maintainer:  Yuheng Xie <elephant@linux.net.cn>
-" Last Change:          2014 Oct 15
-
-" vim: ts=8 sw=8 noet
-
-" Quit when menu translations have already been done.
-if exists("did_menu_trans")
-  finish
-endif
-let did_menu_trans = 1
-let s:keepcpo= &cpo
-set cpo&vim
+" Last Change:          2019-09-09
 
 " This causes trouble for a broken iconv (symptom: last character is always
 " ??).  Without this it works fine anyway, because gbk/cp936 is a superset of
 " gb2312. (suggested by Edward L. Fox)
 " scriptencoding gb2312
 
-" Help menu
-menutrans &Help			<09><><EFBFBD><EFBFBD>(&H)
-menutrans &Overview<Tab><F1>	<09><><EFBFBD><EFBFBD>(&O)<Tab><F1>
-menutrans &User\ Manual		<09>û<EFBFBD><EFBFBD>ֲ<EFBFBD>(&U)
-menutrans &How-to\ links	How-to\ ָ<EFBFBD><EFBFBD>(&H)
-menutrans &Find\.\.\.		<09><><EFBFBD><EFBFBD>(&F)\.\.\.
-menutrans &Credits		<09><>л(&C)
-menutrans Co&pying		<09><>Ȩ(&P)
-menutrans &Sponsor/Register	<09><><EFBFBD><EFBFBD>/ע<EFBFBD><EFBFBD>(&S)
-menutrans O&rphans		<09>¶<EFBFBD>(&R)
-menutrans &Version		<09>汾(&V)
-menutrans &About		<09><><EFBFBD><EFBFBD>(&A)
-
-" File menu
-menutrans &File				<09>ļ<EFBFBD>(&F)
-menutrans &Open\.\.\.<Tab>:e		<09><><EFBFBD><EFBFBD>(&O)\.\.\.<Tab>:e
-menutrans Sp&lit-Open\.\.\.<Tab>:sp	<09>ָ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&L)\.\.\.<Tab>:sp
-menutrans Open\ Tab\.\.\.<Tab>:tabnew	<09>򿪱<EFBFBD>ǩ\.\.\.<Tab>:tabnew
-menutrans &New<Tab>:enew		<09>½<EFBFBD>(&N)<Tab>:enew
-menutrans &Close<Tab>:close		<09>ر<EFBFBD>(&C)<Tab>:close
-menutrans &Save<Tab>:w			<09><><EFBFBD><EFBFBD>(&S)<Tab>:w
-menutrans Save\ &As\.\.\.<Tab>:sav	<09><><EFBFBD><EFBFBD>Ϊ(&A)\.\.\.<Tab>:sav
-menutrans Split\ &Diff\ with\.\.\.	<09>ָ<EFBFBD><EFBFBD>Ƚ<EFBFBD>(Diff)(&D)\.\.\.
-menutrans Split\ Patched\ &By\.\.\.	<09>ָ<EFBFBD><EFBFBD>򲹶<EFBFBD>(Patch)(&B)\.\.\.
-menutrans &Print			<09><>ӡ(&P)
-menutrans Sa&ve-Exit<Tab>:wqa		<09><><EFBFBD>沢<EFBFBD>˳<EFBFBD>(&V)<Tab>:wqa
-menutrans E&xit<Tab>:qa			<09>˳<EFBFBD>(&X)<Tab>:qa
-
-" Edit menu
-menutrans &Edit				<09>༭(&E)
-menutrans &Undo<Tab>u			<09><><EFBFBD><EFBFBD>(&U)<Tab>u
-menutrans &Redo<Tab>^R			<09><><EFBFBD><EFBFBD>(&R)<Tab>^R
-menutrans Rep&eat<Tab>\.		<09>ظ<EFBFBD><EFBFBD>ϴβ<EFBFBD><EFBFBD><EFBFBD>(&E)<Tab>\.
-menutrans Cu&t<Tab>"+x			<09><><EFBFBD><EFBFBD>(&T)<Tab>"+x
-menutrans &Copy<Tab>"+y			<09><><EFBFBD><EFBFBD>(&C)<Tab>"+y
-menutrans &Paste<Tab>"+gP		ճ<><D5B3>(&P)<Tab>"+gP
-menutrans Put\ &Before<Tab>[p		ճ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǰ(&B)<Tab>[p
-menutrans Put\ &After<Tab>]p		ճ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&A)<Tab>]p
-menutrans &Delete<Tab>x			ɾ<EFBFBD><EFBFBD>(&D)<Tab>x
-menutrans &Select\ All<Tab>ggVG		ȫѡ(&S)<Tab>ggVG
-menutrans &Find\.\.\.			<09><><EFBFBD><EFBFBD>(&F)\.\.\.
-menutrans Find\ and\ Rep&lace\.\.\.	<09><><EFBFBD>Һ<EFBFBD><EFBFBD>滻(&L)\.\.\.
-menutrans &Find<Tab>/			<09><><EFBFBD><EFBFBD>(&F)<Tab>/
-menutrans Find\ and\ Rep&lace<Tab>:%s	<09><><EFBFBD>Һ<EFBFBD><EFBFBD>滻(&L)<Tab>:%s
-menutrans Settings\ &Window		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)
-menutrans Startup\ &Settings		<09><><EFBFBD><EFBFBD><EFBFBD>趨(&S)
-menutrans &Global\ Settings		ȫ<EFBFBD><EFBFBD><EFBFBD>趨(&G)
-
-" Edit/Global Settings
-menutrans Toggle\ Pattern\ &Highlight<Tab>:set\ hls!	<09><>/<2F><>ģʽ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)<Tab>:set\ hls!
-menutrans Toggle\ &Ignore-case<Tab>:set\ ic!		<09><>/<2F>غ<EFBFBD><EFBFBD>Դ<EFBFBD>Сд(&I)<Tab>:set\ ic!
-menutrans Toggle\ &Showmatch<Tab>:set\ sm!		<09><>/<2F><><EFBFBD><EFBFBD>ʾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)<Tab>:set\ sm!
-menutrans &Context\ lines			<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&C)
-
-menutrans &Virtual\ Edit			<09><><EFBFBD><EFBFBD><EFBFBD>༭(&V)
-menutrans Never					<09>Ӳ<EFBFBD>
-menutrans Block\ Selection			<09><>ѡ<EFBFBD><EFBFBD>
-menutrans Insert\ mode				<09><><EFBFBD><EFBFBD>ģʽ
-menutrans Block\ and\ Insert			<09><>ѡ<EFBFBD><EFBFBD><EFBFBD>Ͳ<EFBFBD><EFBFBD><EFBFBD>ģʽ
-menutrans Always				<09><><EFBFBD><EFBFBD>
-
-menutrans Toggle\ Insert\ &Mode<Tab>:set\ im!	<09><>/<2F>ز<EFBFBD><EFBFBD><EFBFBD>ģʽ(&M)<Tab>:set\ im!
-menutrans Toggle\ Vi\ C&ompatible<Tab>:set\ cp!	<09><>/<2F><>\ Vi\ <20><><EFBFBD><EFBFBD><Tab>:set\ cp!
-menutrans Search\ &Path\.\.\.			<09><><EFBFBD><EFBFBD>·<EFBFBD><C2B7>(&P)\.\.\.
-menutrans Ta&g\ Files\.\.\.			Tag\ <20>ļ<EFBFBD>(&T)\.\.\.
-
-" GUI options
-menutrans Toggle\ &Toolbar			<09><>/<2F>ع<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&T)
-menutrans Toggle\ &Bottom\ Scrollbar		<09><>/<2F>صײ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&B)
-menutrans Toggle\ &Left\ Scrollbar		<09><>/<2F><><EFBFBD><EFBFBD><EFBFBD>˹<EFBFBD><CBB9><EFBFBD><EFBFBD><EFBFBD>(&L)
-menutrans Toggle\ &Right\ Scrollbar		<09><>/<2F><><EFBFBD>Ҷ˹<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)
-
-" Edit/File Settings
-menutrans F&ile\ Settings			<09>ļ<EFBFBD><EFBFBD>趨(&I)
-
-" Boolean options
-menutrans Toggle\ Line\ &Numbering<Tab>:set\ nu!	<09><>/<2F><><EFBFBD><EFBFBD>ʾ<EFBFBD>к<EFBFBD>(&N)<Tab>:set\ nu!
-menutrans Toggle\ relati&ve\ Line\ Numbering<Tab>:set\ rnu! <20><>/<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>к<EFBFBD>(&V)<Tab>:set\ rnu!
-menutrans Toggle\ &List\ Mode<Tab>:set\ list!		<09><>/<2F><>\ list\ ģʽ(&L)<Tab>:set\ list!
-menutrans Toggle\ Line\ &Wrap<Tab>:set\ wrap!		<09><>/<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)<Tab>:set\ wrap!
-menutrans Toggle\ W&rap\ at\ word<Tab>:set\ lbr!	<09><>/<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)<Tab>:set\ lbr!
-menutrans Toggle\ &expand-tab<Tab>:set\ et!		<09><>/<2F><><EFBFBD><EFBFBD>չ\ tab(&E)<Tab>:set\ et!
-menutrans Toggle\ &auto-indent<Tab>:set\ ai!		<09><>/<2F><><EFBFBD>Զ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&A)<Tab>:set\ ai!
-menutrans Toggle\ &C-indenting<Tab>:set\ cin!		<09><>/<2F><>\ C\ <20><><EFBFBD><EFBFBD>(&C)<Tab>:set\ cin!
-
-" other options
-menutrans &Shiftwidth			<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
-menutrans Soft\ &Tabstop		Soft\ Tab\ <20><><EFBFBD><EFBFBD>(&T)
-menutrans Te&xt\ Width\.\.\.		<09>ı<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&X)\.\.\.
-menutrans &File\ Format\.\.\.		<09>ļ<EFBFBD><EFBFBD><EFBFBD>ʽ(&F)\.\.\.
-menutrans C&olor\ Scheme		<09><>ɫ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)
-menutrans Select\ Fo&nt\.\.\.		ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&N)\.\.\.
-menutrans &Keymap			<09><><EFBFBD><EFBFBD>ӳ<EFBFBD><EFBFBD>(&K)
-
-" Programming menu
-menutrans &Tools			<09><><EFBFBD><EFBFBD>(&T)
-menutrans &Jump\ to\ this\ tag<Tab>g^]	<09><>ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>\ tag(&J)<Tab>g^]
-menutrans Jump\ &back<Tab>^T		<09><>ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&B)<Tab>^T
-menutrans Build\ &Tags\ File		<09><><EFBFBD><EFBFBD>\ Tags\ <20>ļ<EFBFBD>(&T)
-
-" Tools.Spelling Menu
-menutrans &Spelling				ƴд<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
-menutrans &Spell\ Check\ On			<09><><EFBFBD><EFBFBD>ƴд<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
-menutrans Spell\ Check\ &Off			<09>ر<EFBFBD>ƴд<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)
-menutrans To\ &Next\ error<Tab>]s		<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&N)<Tab>]s
-menutrans To\ &Previous\ error<Tab>[s		<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&P)<Tab>[s
-menutrans Suggest\ &Corrections<Tab>z=		<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&C)<Tab>z=
-menutrans &Repeat\ correction<Tab>:spellrepall	<09>ظ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)<Tab>:spellrepall
-menutrans Set\ language\ to\ "en"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en"
-menutrans Set\ language\ to\ "en_au"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_au"
-menutrans Set\ language\ to\ "en_ca"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_ca"
-menutrans Set\ language\ to\ "en_gb"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_gb"
-menutrans Set\ language\ to\ "en_nz"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_nz"
-menutrans Set\ language\ to\ "en_us"		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ\ "en_us"
-menutrans &Find\ More\ Languages		<09><><EFBFBD>Ҹ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&F)
-
-" Tools.Fold Menu
-" open close folds
-menutrans &Folding				<09>۵<EFBFBD>(&F)
-menutrans &Enable/Disable\ folds<Tab>zi		<09><><EFBFBD><EFBFBD>/<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&E)<Tab>zi
-menutrans &View\ Cursor\ Line<Tab>zv		<09>鿴<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&V)<Tab>zv
-menutrans Vie&w\ Cursor\ Line\ only<Tab>zMzx	<09><><EFBFBD>鿴<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)<Tab>zMzx
-menutrans C&lose\ more\ folds<Tab>zm		<09>رո<EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&L)<Tab>zm
-menutrans &Close\ all\ folds<Tab>zM		<09>ر<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&C)<Tab>zM
-menutrans O&pen\ more\ folds<Tab>zr		<09>򿪸<EFBFBD><F2BFAAB8><EFBFBD><EFBFBD>۵<EFBFBD>(&P)<Tab>zr
-menutrans &Open\ all\ folds<Tab>zR		<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&O)<Tab>zR
-" fold method
-menutrans Fold\ Met&hod			<09>۵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)
-menutrans M&anual			<09>ֹ<EFBFBD>(&A)
-menutrans I&ndent			<09><><EFBFBD><EFBFBD>(&N)
-menutrans E&xpression			<09><><EFBFBD><EFBFBD>ʽ(&X)
-menutrans S&yntax			<09>﷨(&Y)
-menutrans &Diff				<09>Ƚ<EFBFBD>(Diff)(&D)
-menutrans Ma&rker			<09><><EFBFBD><EFBFBD>(&R)
-" create and delete folds
-menutrans Create\ &Fold<Tab>zf		<09><><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&F)<Tab>zf
-menutrans &Delete\ Fold<Tab>zd		ɾ<EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&D)<Tab>zd
-menutrans Delete\ &All\ Folds<Tab>zD	ɾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>۵<EFBFBD>(&A)<Tab>zD
-" moving around in folds
-menutrans Fold\ column\ &width		<09>۵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)
-
-" Tools.Diff Menu
-menutrans &Diff				<09>Ƚ<EFBFBD>(Diff)(&D)
-menutrans &Update			<09><><EFBFBD><EFBFBD>(&U)
-menutrans &Get\ Block			<09>õ<EFBFBD><EFBFBD><EFBFBD>(&G)
-menutrans &Put\ Block			<09><><EFBFBD>ÿ<EFBFBD>(&P)
-
-menutrans &Make<Tab>:make		Make(&M)<Tab>:make
-menutrans &List\ Errors<Tab>:cl		<09>г<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&L)<Tab>:cl
-menutrans L&ist\ Messages<Tab>:cl!	<09>г<EFBFBD><EFBFBD><EFBFBD>Ϣ(&I)<Tab>:cl!
-menutrans &Next\ Error<Tab>:cn		<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&N)<Tab>:cn
-menutrans &Previous\ Error<Tab>:cp	<09><>һ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&P)<Tab>:cp
-menutrans &Older\ List<Tab>:cold	<09><><EFBFBD>ɵĴ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>б<EFBFBD>(&O)<Tab>:cold
-menutrans N&ewer\ List<Tab>:cnew	<09><><EFBFBD>µĴ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>б<EFBFBD>(&E)<Tab>:cnew
-menutrans Error\ &Window		<09><><EFBFBD>󴰿<EFBFBD>(&W)
-menutrans &Update<Tab>:cwin		<09><><EFBFBD><EFBFBD>(&U)<Tab>:cwin
-menutrans &Open<Tab>:copen		<09><><EFBFBD><EFBFBD>(&O)<Tab>:copen
-menutrans &Close<Tab>:cclose		<09>ر<EFBFBD>(&C)<Tab>:cclose
-menutrans &Convert\ to\ HEX<Tab>:%!xxd	ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʮ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><Tab>:%!xxd
-menutrans Conve&rt\ back<Tab>:%!xxd\ -r	ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><Tab>:%!xxd\ -r
-menutrans Se&T\ Compiler		<09>趨<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&T)
-
-" Names for buffer menu.
-menutrans &Buffers		<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&B)
-menutrans &Refresh\ menu	<09><><EFBFBD>²˵<C2B2>(&R)
-menutrans &Delete		ɾ<EFBFBD><EFBFBD>(&D)
-menutrans &Alternate		<09><><EFBFBD><EFBFBD>(&A)
-menutrans &Next			<09><>һ<EFBFBD><EFBFBD>(&N)
-menutrans &Previous		<09><>һ<EFBFBD><EFBFBD>(&P)
-
-" Window menu
-menutrans &Window			<09><><EFBFBD><EFBFBD>(&W)
-menutrans &New<Tab>^Wn			<09>½<EFBFBD>(&N)<Tab>^Wn
-menutrans S&plit<Tab>^Ws		<09>ָ<EFBFBD>(&P)<Tab>^Ws
-menutrans Sp&lit\ To\ #<Tab>^W^^	<09>ָ\ #(&L)<Tab>^W^^
-menutrans Split\ &Vertically<Tab>^Wv	<09><>ֱ<EFBFBD>ָ<EFBFBD>(&V)<Tab>^Wv
-menutrans Split\ File\ E&xplorer	<09>ָ<EFBFBD><EFBFBD>ļ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&X)
-menutrans &Close<Tab>^Wc		<09>ر<EFBFBD>(&C)<Tab>^Wc
-menutrans Close\ &Other(s)<Tab>^Wo	<09>ر<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&O)<Tab>^Wo
-menutrans Move\ &To			<09>ƶ<EFBFBD><EFBFBD><EFBFBD>(&T)
-menutrans &Top<Tab>^WK			<09><><EFBFBD><EFBFBD>(&T)<Tab>^WK
-menutrans &Bottom<Tab>^WJ		<09>׶<EFBFBD>(&B)<Tab>^WJ
-menutrans &Left\ side<Tab>^WH		<09><><EFBFBD><EFBFBD>(&L)<Tab>^WH
-menutrans &Right\ side<Tab>^WL		<09>ұ<EFBFBD>(&R)<Tab>^WL
-" menutrans Ne&xt<Tab>^Ww		<09><>һ<EFBFBD><D2BB>(&X)<Tab>^Ww
-" menutrans P&revious<Tab>^WW		<09><>һ<EFBFBD><D2BB>(&R)<Tab>^WW
-menutrans Rotate\ &Up<Tab>^WR		<09><><EFBFBD><EFBFBD><EFBFBD>ֻ<EFBFBD>(&U)<Tab>^WR
-menutrans Rotate\ &Down<Tab>^Wr		<09><><EFBFBD><EFBFBD><EFBFBD>ֻ<EFBFBD>(&D)<Tab>^Wr
-menutrans &Equal\ Size<Tab>^W=		<09>ȴ<EFBFBD>(&E)<Tab>^W=
-menutrans &Max\ Height<Tab>^W_		<09><><EFBFBD><EFBFBD><EFBFBD>߶<EFBFBD>(&M)<Tab>^W
-menutrans M&in\ Height<Tab>^W1_		<09><>С<EFBFBD>߶<EFBFBD>(&I)<Tab>^W1_
-menutrans Max\ &Width<Tab>^W\|		<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&W)<Tab>^W\|
-menutrans Min\ Widt&h<Tab>^W1\|		<09><>С<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)<Tab>^W1\|
-"
-" The popup menu
-menutrans &Undo			<09><><EFBFBD><EFBFBD>(&U)
-menutrans Cu&t			<09><><EFBFBD><EFBFBD>(&T)
-menutrans &Copy			<09><><EFBFBD><EFBFBD>(&C)
-menutrans &Paste		ճ<EFBFBD><EFBFBD>(&P)
-menutrans &Delete		ɾ<EFBFBD><EFBFBD>(&D)
-menutrans Select\ Blockwise	ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-menutrans Select\ &Word		ѡ<EFBFBD>񵥴<EFBFBD>(&W)
-menutrans Select\ &Sentence	ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
-menutrans Select\ Pa&ragraph	ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&R)
-menutrans Select\ &Line		ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&L)
-menutrans Select\ &Block	ѡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&B)
-menutrans Select\ &All		ȫѡ(&A)
-"
-" The GUI toolbar
-if has("toolbar")
-  if exists("*Do_toolbar_tmenu")
-    delfun Do_toolbar_tmenu
-  endif
-  fun Do_toolbar_tmenu()
-    tmenu ToolBar.Open		<09><><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>
-    tmenu ToolBar.Save		<09><><EFBFBD>浱ǰ<EFBFBD>ļ<EFBFBD>
-    tmenu ToolBar.SaveAll	<09><><EFBFBD><EFBFBD>ȫ<EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>
-    tmenu ToolBar.Print		<09><>ӡ
-    tmenu ToolBar.Undo		<09><><EFBFBD><EFBFBD>
-    tmenu ToolBar.Redo		<09><><EFBFBD><EFBFBD>
-    tmenu ToolBar.Cut		<09><><EFBFBD>е<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-    tmenu ToolBar.Copy		<09><><EFBFBD>Ƶ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-    tmenu ToolBar.Paste		<09>Ӽ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ճ<EFBFBD><EFBFBD>
-    tmenu ToolBar.Find		<09><><EFBFBD><EFBFBD>...
-    tmenu ToolBar.FindNext	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD>
-    tmenu ToolBar.FindPrev	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><EFBFBD>
-    tmenu ToolBar.Replace	<09><><EFBFBD>Һ<EFBFBD><EFBFBD>滻...
-    tmenu ToolBar.LoadSesn	<09><><EFBFBD>ػỰ
-    tmenu ToolBar.SaveSesn	<09><><EFBFBD>浱ǰ<EFBFBD>Ự
-    tmenu ToolBar.RunScript	<09><><EFBFBD><EFBFBD> Vim <20>ű<EFBFBD>
-    tmenu ToolBar.Make		ִ<EFBFBD><EFBFBD> Make (:make)
-    tmenu ToolBar.RunCtags	<09>ڵ<EFBFBD>ǰĿ¼<EFBFBD><EFBFBD><EFBFBD><EFBFBD> tags (!ctags -R .)
-    tmenu ToolBar.TagJump	<09><>ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>λ<EFBFBD>õ<EFBFBD> tag
-    tmenu ToolBar.Help		Vim <20><><EFBFBD><EFBFBD>
-    tmenu ToolBar.FindHelp	<09><><EFBFBD><EFBFBD> Vim <20><><EFBFBD><EFBFBD>
-  endfun
-endif
-
-" Syntax menu
-menutrans &Syntax			<09>﷨(&S)
-menutrans &Show\ filetypes\ in\ menu	<09>ڲ˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʾ<EFBFBD>ļ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&S)
-menutrans &Off				<09>ر<EFBFBD>(&O)
-menutrans &Manual			<09>ֹ<EFBFBD>(&M)
-menutrans A&utomatic			<09>Զ<EFBFBD>(&U)
-menutrans on/off\ for\ &This\ file	<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD><C4BC><EFBFBD>/<EFBFBD><EFBFBD>(&T)
-menutrans Co&lor\ test			ɫ<EFBFBD>ʲ<EFBFBD><EFBFBD><EFBFBD>(&L)
-menutrans &Highlight\ test		<09><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(&H)
-menutrans &Convert\ to\ HTML		ת<EFBFBD><EFBFBD><EFBFBD><EFBFBD>\ HTML(&C)
-menutrans Set\ '&syntax'\ only		<09><><EFBFBD>趨\ 'syntax'(&S)
-menutrans Set\ '&filetype'\ too		Ҳ<EFBFBD>趨\ 'filetype'(&F)
-
-let &cpo = s:keepcpo
-unlet s:keepcpo
+" As mentioned above, gbk/cp936 is a superset of (and backward compatible with)
+" gb2312, then source the translation encoded in cp936 should be ok. -- Shun
+source <sfile>:p:h/menu_zh_cn.cp936.vim

runtime/lang/menu_zh_cn.utf-8.vim

@@ -1,270 +1,452 @@
 " Menu Translations:    Simplified Chinese
 " Maintainer:           Shun Bai <baishunde@gmail.com>
 " Previous Maintainer:  Yuheng Xie <elephant@linux.net.cn>
-" Last Change:          2014 Oct 15
-
-" vim: ts=8 sw=8 noet
+" Last Change:          2019 Sep 11
 
 " Quit when menu translations have already been done.
 if exists("did_menu_trans")
   finish
 endif
 let did_menu_trans = 1
-let s:keepcpo= &cpo
+let s:keepcpo = &cpo
 set cpo&vim
 
 scriptencoding utf-8
 
 " Help menu
-menutrans &Help			帮助(&H)
-menutrans &Overview<Tab><F1>	纵览(&O)<Tab><F1>
-menutrans &User\ Manual		用户手册(&U)
-menutrans &How-to\ links	How-to\ 指引(&H)
-menutrans &Find\.\.\.		查找(&F)\.\.\.
-menutrans &Credits		致谢(&C)
-menutrans Co&pying		版权(&P)
-menutrans &Sponsor/Register	赞助/注册(&S)
-menutrans O&rphans		孤儿(&R)
-menutrans &Version		版本(&V)
-menutrans &About		关于(&A)
+menutrans &Help		帮助(&H)
+" Help menuitems and dialog {{{1
+menutrans &Overview<Tab><F1>	概述(&O)<Tab><F1>
+menutrans &User\ Manual			用户手册(&U)
+menutrans &How-to\ Links		如何使用(&H)
+menutrans &Find\.\.\.			查找(&F)\.\.\.
+menutrans &Credits				致谢(&C)
+menutrans Co&pying				版权(&P)
+menutrans &Sponsor/Register		赞助/注册(&S)
+menutrans O&rphans				拯救孤儿(&R)
+menutrans &Version				版本(&V)
+menutrans &About				关于(&A)
+
+" fun! s:Helpfind()
+if !exists("g:menutrans_help_dialog")
+  let g:menutrans_help_dialog = "输入命令或单词以获得帮助:\n\n前缀 i_ 表示输入模式下的命令(如: i_CTRL-X)\n前缀 c_ 表示命令行下的编辑命令(如: c_<Del>)\n前缀 ' 表示选项名(如: 'shiftwidth')"
+endif
+" }}}
 
 " File menu
-menutrans &File				文件(&F)
-menutrans &Open\.\.\.<Tab>:e		打开(&O)\.\.\.<Tab>:e
-menutrans Sp&lit-Open\.\.\.<Tab>:sp	分割并打开(&L)\.\.\.<Tab>:sp
-menutrans Open\ Tab\.\.\.<Tab>:tabnew	打开标签\.\.\.<Tab>:tabnew
-menutrans &New<Tab>:enew		新建(&N)<Tab>:enew
-menutrans &Close<Tab>:close		关闭(&C)<Tab>:close
-menutrans &Save<Tab>:w			保存(&S)<Tab>:w
-menutrans Save\ &As\.\.\.<Tab>:sav	另存为(&A)\.\.\.<Tab>:sav
-menutrans Split\ &Diff\ with\.\.\.	分割比较(Diff)(&D)\.\.\.
-menutrans Split\ Patched\ &By\.\.\.	分割打补丁(Patch)(&B)\.\.\.
-menutrans &Print			打印(&P)
-menutrans Sa&ve-Exit<Tab>:wqa		保存并退出(&V)<Tab>:wqa
-menutrans E&xit<Tab>:qa			退出(&X)<Tab>:qa
+menutrans &File		文件(&F)
+" File menuitems {{{1
+menutrans &Open\.\.\.<Tab>:e			打开(&O)\.\.\.<Tab>:e
+menutrans Sp&lit-Open\.\.\.<Tab>:sp		在拆分窗口打开(&L)\.\.\.<Tab>:sp
+menutrans Open\ Tab\.\.\.<Tab>:tabnew	在标签页打开\.\.\.<Tab>:tabnew
+menutrans &New<Tab>:enew				新建(&N)<Tab>:enew
+menutrans &Close<Tab>:close				关闭(&C)<Tab>:close
+menutrans &Save<Tab>:w					保存(&S)<Tab>:w
+menutrans Save\ &As\.\.\.<Tab>:sav		另存为(&A)\.\.\.<Tab>:sav
+menutrans Split\ &Diff\ With\.\.\.		拆分窗口以对比差异(Diff)(&D)\.\.\.
+menutrans Split\ Patched\ &By\.\.\.		拆分窗口以进行修补(Patch)(&B)\.\.\.
+menutrans &Print						打印(&P)
+menutrans Sa&ve-Exit<Tab>:wqa			保存并退出(&V)<Tab>:wqa
+menutrans E&xit<Tab>:qa					退出(&X)<Tab>:qa
+" }}}
 
 " Edit menu
-menutrans &Edit				编辑(&E)
-menutrans &Undo<Tab>u			撤销(&U)<Tab>u
-menutrans &Redo<Tab>^R			重做(&R)<Tab>^R
-menutrans Rep&eat<Tab>\.		重复上次操作(&E)<Tab>\.
-menutrans Cu&t<Tab>"+x			剪切(&T)<Tab>"+x
-menutrans &Copy<Tab>"+y			复制(&C)<Tab>"+y
-menutrans &Paste<Tab>"+gP		粘贴(&P)<Tab>"+gP
-menutrans Put\ &Before<Tab>[p		粘贴到光标前(&B)<Tab>[p
-menutrans Put\ &After<Tab>]p		粘贴到光标后(&A)<Tab>]p
-menutrans &Delete<Tab>x			删除(&D)<Tab>x
-menutrans &Select\ All<Tab>ggVG		全选(&S)<Tab>ggVG
-menutrans &Find\.\.\.			查找(&F)\.\.\.
-menutrans Find\ and\ Rep&lace\.\.\.	查找和替换(&L)\.\.\.
-menutrans &Find<Tab>/			查找(&F)<Tab>/
-menutrans Find\ and\ Rep&lace<Tab>:%s	查找和替换(&L)<Tab>:%s
-menutrans Settings\ &Window		设定窗口(&W)
-menutrans Startup\ &Settings		启动设定(&S)
-menutrans &Global\ Settings		全局设定(&G)
+menutrans &Edit		编辑(&E)
+" Edit menuitems {{{1
+menutrans &Undo<Tab>u						撤销(&U)<Tab>u
+menutrans &Redo<Tab>^R						恢复(&R)<Tab>^R
+menutrans Rep&eat<Tab>\.					重复(&E)<Tab>\.
+menutrans Cu&t<Tab>"+x						剪切(&T)<Tab>"+x
+menutrans &Copy<Tab>"+y						复制(&C)<Tab>"+y
+menutrans &Paste<Tab>"+gP					粘贴(&P)<Tab>"+gP
+menutrans Put\ &Before<Tab>[p				粘贴到光标前(&B)<Tab>[p
+menutrans Put\ &After<Tab>]p				粘贴到光标后(&A)<Tab>]p
+menutrans &Delete<Tab>x						删除(&D)<Tab>x
+menutrans &Select\ All<Tab>ggVG				全选(&S)<Tab>ggVG
+menutrans &Find\.\.\.						查找(&F)\.\.\.
+menutrans Find\ and\ Rep&lace\.\.\.			查找和替换(&L)\.\.\.
+menutrans &Find<Tab>/						查找(&F)<Tab>/
+menutrans Find\ and\ Rep&lace<Tab>:%s		查找和替换(&L)<Tab>:%s
+menutrans Settings\ &Window					设置窗口(&W)
+menutrans Startup\ &Settings				启动设置(&S)
 
 " Edit/Global Settings
-menutrans Toggle\ Pattern\ &Highlight<Tab>:set\ hls!	开/关模式高亮(&H)<Tab>:set\ hls!
-menutrans Toggle\ &Ignore-case<Tab>:set\ ic!		开/关忽略大小写(&I)<Tab>:set\ ic!
-menutrans Toggle\ &Showmatch<Tab>:set\ sm!		开/关显示配对(&S)<Tab>:set\ sm!
-menutrans &Context\ lines			上下文行数(&C)
-
-menutrans &Virtual\ Edit			虚拟编辑(&V)
+menutrans &Global\ Settings					全局设置(&G)
+" Edit.Global Settings menuitems and dialogs {{{2
+menutrans Toggle\ Pattern\ &Highlight<Tab>:set\ hls!		开/关高亮查找内容(&H)<Tab>:set\ hls!
+menutrans Toggle\ &Ignoring\ Case<Tab>:set\ ic!				开/关忽略大小写(&I)<Tab>:set\ ic!
+menutrans Toggle\ &Showing\ Matched\ Pairs<Tab>:set\ sm!	开/关显示括号匹配(&S)<Tab>:set\ sm!
+menutrans &Context\ Lines									上下文行数(&C)
+menutrans &Virtual\ Edit									虚拟编辑(&V)
+" Edit.Global Settings.Virtual Edit menuitems {{{3
 menutrans Never					从不
-menutrans Block\ Selection			块选择
-menutrans Insert\ mode				插入模式
-menutrans Block\ and\ Insert			块选择和插入模式
-menutrans Always				总是
-
-menutrans Toggle\ Insert\ &Mode<Tab>:set\ im!	开/关插入模式(&M)<Tab>:set\ im!
-menutrans Toggle\ Vi\ C&ompatible<Tab>:set\ cp!	开/关\ Vi\ 兼容<Tab>:set\ cp!
-menutrans Search\ &Path\.\.\.			查找路径(&P)\.\.\.
-menutrans Ta&g\ Files\.\.\.			Tag\ 文件(&T)\.\.\.
+menutrans Block\ Selection		只在选定矩形块时
+menutrans Insert\ Mode			只在插入模式时
+menutrans Block\ and\ Insert	在选定矩形块和插入模式时
+menutrans Always				始终
+" }}}
+menutrans Toggle\ Insert\ &Mode<Tab>:set\ im!				开/关插入模式(&M)<Tab>:set\ im!
+menutrans Toggle\ Vi\ C&ompatibility<Tab>:set\ cp!			开/关\ Vi\ 兼容性(&O)<Tab>:set\ cp!
+menutrans Search\ &Path\.\.\.								搜索路径(&P)\.\.\.
+menutrans Ta&g\ Files\.\.\.									标记文件(Tags)(&G)\.\.\.
 
 " GUI options
-menutrans Toggle\ &Toolbar			开/关工具栏(&T)
-menutrans Toggle\ &Bottom\ Scrollbar		开/关底部滚动条(&B)
-menutrans Toggle\ &Left\ Scrollbar		开/关左端滚动条(&L)
-menutrans Toggle\ &Right\ Scrollbar		开/关右端滚动条(&R)
+menutrans Toggle\ &Toolbar									开/关工具栏(&T)
+menutrans Toggle\ &Bottom\ Scrollbar						开/关底部滚动条(&B)
+menutrans Toggle\ &Left\ Scrollbar							开/关左侧滚动条(&L)
+menutrans Toggle\ &Right\ Scrollbar							开/关右侧滚动条(&R)
+
+" fun! s:SearchP()
+if !exists("g:menutrans_path_dialog")
+  let g:menutrans_path_dialog = "输入搜索路径。\n用逗号分隔目录名。"
+endif
+
+" fun! s:TagFiles()
+if !exists("g:menutrans_tags_dialog")
+  let g:menutrans_tags_dialog = "输入标记文件(Tags)名称。\n用逗号分隔文件名。"
+endif
+" }}}
 
 " Edit/File Settings
-menutrans F&ile\ Settings			文件设定(&I)
-
+menutrans F&ile\ Settings					文件设置(&I)
+" Edit.File Settings menuitems and dialogs {{{2
 " Boolean options
-menutrans Toggle\ Line\ &Numbering<Tab>:set\ nu!	开/关显示行号(&N)<Tab>:set\ nu!
-menutrans Toggle\ relati&ve\ Line\ Numbering<Tab>:set\ rnu! 开/关相对行号(&V)<Tab>:set\ rnu!
-menutrans Toggle\ &List\ Mode<Tab>:set\ list!		开/关\ list\ 模式(&L)<Tab>:set\ list!
-menutrans Toggle\ Line\ &Wrap<Tab>:set\ wrap!		开/关折行(&W)<Tab>:set\ wrap!
-menutrans Toggle\ W&rap\ at\ word<Tab>:set\ lbr!	开/关整词折行(&R)<Tab>:set\ lbr!
-menutrans Toggle\ &expand-tab<Tab>:set\ et!		开/关扩展\ tab(&E)<Tab>:set\ et!
-menutrans Toggle\ &auto-indent<Tab>:set\ ai!		开/关自动缩进(&A)<Tab>:set\ ai!
-menutrans Toggle\ &C-indenting<Tab>:set\ cin!		开/关\ C\ 缩进(&C)<Tab>:set\ cin!
+menutrans Toggle\ Line\ &Numbering<Tab>:set\ nu!			开/关行号(&N)<Tab>:set\ nu!
+menutrans Toggle\ Relati&ve\ Line\ Numbering<Tab>:set\ rnu!	开/关相对行号(&V)<Tab>:set\ rnu!
+menutrans Toggle\ &List\ Mode<Tab>:set\ list!				开/关列表模式(&L)<Tab>:set\ list!
+menutrans Toggle\ Line\ &Wrapping<Tab>:set\ wrap!			开/关换行(&W)<Tab>:set\ wrap!
+menutrans Toggle\ W&rapping\ at\ Word<Tab>:set\ lbr!		开/关词尾换行(&R)<Tab>:set\ lbr!
+menutrans Toggle\ Tab\ &Expanding<Tab>:set\ et!				开/关制表符扩展(&E)<Tab>:set\ et!
+menutrans Toggle\ &Auto\ Indenting<Tab>:set\ ai!			开/关自动缩进(&A)<Tab>:set\ ai!
+menutrans Toggle\ &C-Style\ Indenting<Tab>:set\ cin!		开/关\ C\ 语言式缩进(&C)<Tab>:set\ cin!
 
 " other options
-menutrans &Shiftwidth			缩进宽度(&S)
-menutrans Soft\ &Tabstop		Soft\ Tab\ 宽度(&T)
-menutrans Te&xt\ Width\.\.\.		文本宽度(&X)\.\.\.
-menutrans &File\ Format\.\.\.		文件格式(&F)\.\.\.
-menutrans C&olor\ Scheme		配色方案(&O)
-menutrans Select\ Fo&nt\.\.\.		选择字体(&N)\.\.\.
-menutrans &Keymap			键盘映射(&K)
+menutrans &Shiftwidth										缩进宽度(&S)
+menutrans Soft\ &Tabstop									软制表位宽度(Soft Tabstop)(&T)
+menutrans Te&xt\ Width\.\.\.								文本宽度(&X)\.\.\.
+menutrans &File\ Format\.\.\.								文件格式(&F)\.\.\.
+
+" fun! s:TextWidth()
+if !exists("g:menutrans_textwidth_dialog")
+  let g:menutrans_textwidth_dialog = "输入文本宽度(每行最大字符数，0 表示禁用):"
+endif
+
+" fun! s:FileFormat()
+if !exists("g:menutrans_fileformat_dialog")
+  let g:menutrans_fileformat_dialog = "选择文件的保存格式:"
+endif
+if !exists("g:menutrans_fileformat_choices")
+  let g:menutrans_fileformat_choices = "&Unix\n&Dos\n&Mac\n取消(&C)"
+endif
+" }}}
+menutrans Show\ C&olor\ Schemes\ in\ Menu	在菜单中显示配色方案(&O)
+menutrans C&olor\ Scheme					配色方案(&O)
+menutrans Show\ &Keymaps\ in\ Menu			在菜单中显示键盘映射(&K)
+menutrans &Keymap							键盘映射(&K)
+menutrans Select\ Fo&nt\.\.\.				选择字体(&N)\.\.\.
+" }}}
 
 " Programming menu
-menutrans &Tools			工具(&T)
-menutrans &Jump\ to\ this\ tag<Tab>g^]	跳转到这个\ tag(&J)<Tab>g^]
-menutrans Jump\ &back<Tab>^T		跳转返回(&B)<Tab>^T
-menutrans Build\ &Tags\ File		建立\ Tags\ 文件(&T)
+menutrans &Tools	工具(&T)
+" Tools menuitems {{{1
+menutrans &Jump\ to\ This\ Tag<Tab>g^]			跳转到这个标记(Tag)(&J)<Tab>g^]
+menutrans Jump\ &Back<Tab>^T					跳转回(&B)<Tab>^T
+menutrans Build\ &Tags\ File					生成标记文件(Tags)(&T)
 
 " Tools.Spelling Menu
-menutrans &Spelling				拼写检查(&S)
-menutrans &Spell\ Check\ On			打开拼写检查(&S)
-menutrans Spell\ Check\ &Off			关闭拼写检查(&O)
-menutrans To\ &Next\ error<Tab>]s		上一个错误(&N)<Tab>]s
-menutrans To\ &Previous\ error<Tab>[s		下一个错误(&P)<Tab>[s
-menutrans Suggest\ &Corrections<Tab>z=		修正建议(&C)<Tab>z=
-menutrans &Repeat\ correction<Tab>:spellrepall	重复修正(&R)<Tab>:spellrepall
-menutrans Set\ language\ to\ "en"		设定语言为\ "en"
-menutrans Set\ language\ to\ "en_au"		设定语言为\ "en_au"
-menutrans Set\ language\ to\ "en_ca"		设定语言为\ "en_ca"
-menutrans Set\ language\ to\ "en_gb"		设定语言为\ "en_gb"
-menutrans Set\ language\ to\ "en_nz"		设定语言为\ "en_nz"
-menutrans Set\ language\ to\ "en_us"		设定语言为\ "en_us"
-menutrans &Find\ More\ Languages		查找更多语言(&F)
+menutrans &Spelling								拼写检查(&S)
+" Tools.Spelling menuitems and dialog {{{2
+menutrans &Spell\ Check\ On						打开拼写检查(&S)
+menutrans Spell\ Check\ &Off					关闭拼写检查(&O)
+menutrans To\ &Next\ Error<Tab>]s				上一个错误(&N)<Tab>]s
+menutrans To\ &Previous\ Error<Tab>[s			下一个错误(&P)<Tab>[s
+menutrans Suggest\ &Corrections<Tab>z=			更正建议(&C)<Tab>z=
+menutrans &Repeat\ Correction<Tab>:spellrepall	更正全部同类错误(&R)<Tab>:spellrepall
+menutrans Set\ Language\ to\ "en"				设置语言为\ "en"
+menutrans Set\ Language\ to\ "en_au"			设置语言为\ "en_au"
+menutrans Set\ Language\ to\ "en_ca"			设置语言为\ "en_ca"
+menutrans Set\ Language\ to\ "en_gb"			设置语言为\ "en_gb"
+menutrans Set\ Language\ to\ "en_nz"			设置语言为\ "en_nz"
+menutrans Set\ Language\ to\ "en_us"			设置语言为\ "en_us"
+menutrans &Find\ More\ Languages				查找更多语言(&F)
+
+" func! s:SpellLang()
+if !exists("g:menutrans_set_lang_to")
+  let g:menutrans_set_lang_to = "设置语言为"
+endif
+" }}}
 
 " Tools.Fold Menu
+menutrans &Folding								折叠(&F)
+" Tools.Fold menuitems {{{2
 " open close folds
-menutrans &Folding				折叠(&F)
-menutrans &Enable/Disable\ folds<Tab>zi		启用/禁用折叠(&E)<Tab>zi
-menutrans &View\ Cursor\ Line<Tab>zv		查看此行(&V)<Tab>zv
-menutrans Vie&w\ Cursor\ Line\ only<Tab>zMzx	仅查看此行(&W)<Tab>zMzx
-menutrans C&lose\ more\ folds<Tab>zm		关闭更多折叠(&L)<Tab>zm
-menutrans &Close\ all\ folds<Tab>zM		关闭所有折叠(&C)<Tab>zM
-menutrans O&pen\ more\ folds<Tab>zr		打开更多折叠(&P)<Tab>zr
-menutrans &Open\ all\ folds<Tab>zR		打开所有折叠(&O)<Tab>zR
+menutrans &Enable/Disable\ Folds<Tab>zi			启用/禁用折叠(&E)<Tab>zi
+menutrans &View\ Cursor\ Line<Tab>zv			展开光标所在行(&V)<Tab>zv
+menutrans Vie&w\ Cursor\ Line\ Only<Tab>zMzx	只展开光标所在行(&W)<Tab>zMzx
+menutrans C&lose\ More\ Folds<Tab>zm			折叠一级(&L)<Tab>zm
+menutrans &Close\ All\ Folds<Tab>zM				折叠全部(&C)<Tab>zM
+menutrans O&pen\ More\ Folds<Tab>zr				展开一级(&P)<Tab>zr
+menutrans &Open\ All\ Folds<Tab>zR				展开全部(&O)<Tab>zR
 " fold method
-menutrans Fold\ Met&hod			折叠方法(&H)
-menutrans M&anual			手工(&A)
-menutrans I&ndent			缩进(&N)
-menutrans E&xpression			表达式(&X)
-menutrans S&yntax			语法(&Y)
-menutrans &Diff				比较(Diff)(&D)
-menutrans Ma&rker			标记(&R)
+menutrans Fold\ Met&hod							折叠方式(&H)
+" Tools.Fold.Fold Method menuitems {{{3
+menutrans M&anual		手动(&A)
+menutrans I&ndent		缩进(&N)
+menutrans E&xpression	表达式(&X)
+menutrans S&yntax		语法(&Y)
+menutrans &Diff			差异(Diff)(&D)
+menutrans Ma&rker		记号(Marker)(&R)
+" }}}
 " create and delete folds
-menutrans Create\ &Fold<Tab>zf		创建折叠(&F)<Tab>zf
-menutrans &Delete\ Fold<Tab>zd		删除折叠(&D)<Tab>zd
-menutrans Delete\ &All\ Folds<Tab>zD	删除所有折叠(&A)<Tab>zD
+menutrans Create\ &Fold<Tab>zf					创建折叠(&F)<Tab>zf
+menutrans &Delete\ Fold<Tab>zd					删除折叠(&D)<Tab>zd
+menutrans Delete\ &All\ Folds<Tab>zD			删除全部折叠(&A)<Tab>zD
 " moving around in folds
-menutrans Fold\ column\ &width		折叠栏宽度(&W)
+menutrans Fold\ Col&umn\ Width					折叠操作栏宽度(&W)
+" }}}
 
 " Tools.Diff Menu
-menutrans &Diff				比较(Diff)(&D)
-menutrans &Update			更新(&U)
-menutrans &Get\ Block			得到块(&G)
-menutrans &Put\ Block			放置块(&P)
+menutrans &Diff									差异(Diff)(&D)
+" Tools.Diff menuitems {{{2
+menutrans &Update		刷新(&U)
+menutrans &Get\ Block	采用对侧文本块(&G)
+menutrans &Put\ Block	采用本侧文本块(&P)
+" }}}
 
-menutrans &Make<Tab>:make		Make(&M)<Tab>:make
-menutrans &List\ Errors<Tab>:cl		列出错误(&L)<Tab>:cl
-menutrans L&ist\ Messages<Tab>:cl!	列出消息(&I)<Tab>:cl!
-menutrans &Next\ Error<Tab>:cn		下一个错误(&N)<Tab>:cn
-menutrans &Previous\ Error<Tab>:cp	上一个错误(&P)<Tab>:cp
-menutrans &Older\ List<Tab>:cold	更旧的错误列表(&O)<Tab>:cold
-menutrans N&ewer\ List<Tab>:cnew	更新的错误列表(&E)<Tab>:cnew
-menutrans Error\ &Window		错误窗口(&W)
-menutrans &Update<Tab>:cwin		更新(&U)<Tab>:cwin
+menutrans &Make<Tab>:make						生成(Make)(&M)<Tab>:make
+menutrans &List\ Errors<Tab>:cl					列出错误(&L)<Tab>:cl
+menutrans L&ist\ Messages<Tab>:cl!				列出消息(&I)<Tab>:cl!
+menutrans &Next\ Error<Tab>:cn					下一个错误(&N)<Tab>:cn
+menutrans &Previous\ Error<Tab>:cp				上一个错误(&P)<Tab>:cp
+menutrans &Older\ List<Tab>:cold				较旧的错误列表(&O)<Tab>:cold
+menutrans N&ewer\ List<Tab>:cnew				较新的错误列表(&E)<Tab>:cnew
+menutrans Error\ &Window						错误窗口(&W)
+" Tools.Error Window menuitems {{{2
+menutrans &Update<Tab>:cwin		刷新(&U)<Tab>:cwin
 menutrans &Open<Tab>:copen		打开(&O)<Tab>:copen
-menutrans &Close<Tab>:cclose		关闭(&C)<Tab>:cclose
-menutrans &Convert\ to\ HEX<Tab>:%!xxd	转换成十六进制<Tab>:%!xxd
-menutrans Conve&rt\ back<Tab>:%!xxd\ -r	转换返回<Tab>:%!xxd\ -r
-menutrans Se&T\ Compiler		设定编译器(&T)
+menutrans &Close<Tab>:cclose	关闭(&C)<Tab>:cclose
+" }}}
+menutrans Show\ Compiler\ Se&ttings\ in\ Menu	在菜单中显示编译器设置(&T)
+menutrans Se&t\ Compiler						设置编译器(&T)
+menutrans &Convert\ to\ HEX<Tab>:%!xxd			转换成十六进制(&C)<Tab>:%!xxd
+menutrans Conve&rt\ Back<Tab>:%!xxd\ -r			转换回(&R)<Tab>:%!xxd\ -r
+" }}}
 
-" Names for buffer menu.
-menutrans &Buffers		缓冲区(&B)
-menutrans &Refresh\ menu	更新菜单(&R)
-menutrans &Delete		删除(&D)
-menutrans &Alternate		交替(&A)
-menutrans &Next			下一个(&N)
-menutrans &Previous		上一个(&P)
+" Buffer menu
+menutrans &Buffers	缓冲区(&B)
+" Buffer menuitems and dialog {{{1
+menutrans &Refresh\ Menu	刷新本菜单(&R)
+menutrans &Delete			删除(&D)
+menutrans &Alternate		切换(&A)
+menutrans &Next				下一个(&N)
+menutrans &Previous			上一个(&P)
+
+" func! s:BMMunge(fname, bnum) 
+if !exists("g:menutrans_no_file")
+  let g:menutrans_no_file = "[无文件]"
+endif
+" }}}
 
 " Window menu
-menutrans &Window			窗口(&W)
-menutrans &New<Tab>^Wn			新建(&N)<Tab>^Wn
-menutrans S&plit<Tab>^Ws		分割(&P)<Tab>^Ws
-menutrans Sp&lit\ To\ #<Tab>^W^^	分割到\ #(&L)<Tab>^W^^
-menutrans Split\ &Vertically<Tab>^Wv	垂直分割(&V)<Tab>^Wv
-menutrans Split\ File\ E&xplorer	分割文件浏览器(&X)
-menutrans &Close<Tab>^Wc		关闭(&C)<Tab>^Wc
-menutrans Close\ &Other(s)<Tab>^Wo	关闭其它窗口(&O)<Tab>^Wo
-menutrans Move\ &To			移动到(&T)
-menutrans &Top<Tab>^WK			顶端(&T)<Tab>^WK
-menutrans &Bottom<Tab>^WJ		底端(&B)<Tab>^WJ
-menutrans &Left\ side<Tab>^WH		左边(&L)<Tab>^WH
-menutrans &Right\ side<Tab>^WL		右边(&R)<Tab>^WL
-" menutrans Ne&xt<Tab>^Ww		下一个(&X)<Tab>^Ww
-" menutrans P&revious<Tab>^WW		上一个(&R)<Tab>^WW
-menutrans Rotate\ &Up<Tab>^WR		向上轮换(&U)<Tab>^WR
-menutrans Rotate\ &Down<Tab>^Wr		向下轮换(&D)<Tab>^Wr
-menutrans &Equal\ Size<Tab>^W=		等大(&E)<Tab>^W=
-menutrans &Max\ Height<Tab>^W_		最大高度(&M)<Tab>^W
-menutrans M&in\ Height<Tab>^W1_		最小高度(&I)<Tab>^W1_
-menutrans Max\ &Width<Tab>^W\|		最大宽度(&W)<Tab>^W\|
-menutrans Min\ Widt&h<Tab>^W1\|		最小宽度(&H)<Tab>^W1\|
-"
-" The popup menu
-menutrans &Undo			撤销(&U)
-menutrans Cu&t			剪切(&T)
-menutrans &Copy			复制(&C)
-menutrans &Paste		粘贴(&P)
-menutrans &Delete		删除(&D)
-menutrans Select\ Blockwise	选择块
-menutrans Select\ &Word		选择单词(&W)
-menutrans Select\ &Sentence	选择句子(&S)
-menutrans Select\ Pa&ragraph	选择段落(&R)
-menutrans Select\ &Line		选择行(&L)
-menutrans Select\ &Block	选择块(&B)
-menutrans Select\ &All		全选(&A)
-"
-" The GUI toolbar
+menutrans &Window	窗口(&W)
+" Window menuitems {{{1
+menutrans &New<Tab>^Wn					新建(&N)<Tab>^Wn
+menutrans S&plit<Tab>^Ws				拆分(&P)<Tab>^Ws
+menutrans Sp&lit\ To\ #<Tab>^W^^		拆分并显示缓冲区\ #(&L)<Tab>^W^^
+menutrans Split\ &Vertically<Tab>^Wv	垂直拆分(&V)<Tab>^Wv
+menutrans Split\ File\ E&xplorer		拆分并打开文件浏览器(&X)
+menutrans &Close<Tab>^Wc				关闭(&C)<Tab>^Wc
+menutrans Close\ &Other(s)<Tab>^Wo		除此之外全部关闭(&O)<Tab>^Wo
+menutrans Move\ &To						移动到(&T)
+menutrans &Top<Tab>^WK					顶端(&T)<Tab>^WK
+menutrans &Bottom<Tab>^WJ				底端(&B)<Tab>^WJ
+menutrans &Left\ Side<Tab>^WH			左边(&L)<Tab>^WH
+menutrans &Right\ Side<Tab>^WL			右边(&R)<Tab>^WL
+menutrans Rotate\ &Up<Tab>^WR			向上轮换(&U)<Tab>^WR
+menutrans Rotate\ &Down<Tab>^Wr			向下轮换(&D)<Tab>^Wr
+menutrans &Equal\ Size<Tab>^W=			平均分布(&E)<Tab>^W=
+menutrans &Max\ Height<Tab>^W_			最大高度(&M)<Tab>^W
+menutrans M&in\ Height<Tab>^W1_			最小高度(&I)<Tab>^W1_
+menutrans Max\ &Width<Tab>^W\|			最大宽度(&W)<Tab>^W\|
+menutrans Min\ Widt&h<Tab>^W1\|			最小宽度(&H)<Tab>^W1\|
+" }}}
+
+" The popup menu {{{1
+menutrans &Undo					撤销(&U)
+menutrans Cu&t					剪切(&T)
+menutrans &Copy					复制(&C)
+menutrans &Paste				粘贴(&P)
+menutrans &Delete				删除(&D)
+menutrans Select\ Blockwise		改为选定矩形块
+menutrans Select\ &Word			选定单词(&W)
+menutrans Select\ &Sentence		选定句(&S)
+menutrans Select\ Pa&ragraph	选定段落(&R)
+menutrans Select\ &Line			选定行(&L)
+menutrans Select\ &Block		选定矩形块(&B)
+menutrans Select\ &All			全选(&A)
+
+" func! <SID>SpellPopup()
+if !exists("g:menutrans_spell_change_ARG_to")
+  let g:menutrans_spell_change_ARG_to = '将\ "%s"\ 更改为'
+endif
+if !exists("g:menutrans_spell_add_ARG_to_word_list")
+  let g:menutrans_spell_add_ARG_to_word_list = '将\ "%s"\ 添加到词典'
+endif
+if !exists("g:menutrans_spell_ignore_ARG")
+  let g:menutrans_spell_ignore_ARG = '忽略\ "%s"'
+endif
+" }}}
+
+" The GUI toolbar {{{1
 if has("toolbar")
   if exists("*Do_toolbar_tmenu")
     delfun Do_toolbar_tmenu
   endif
   fun Do_toolbar_tmenu()
-    tmenu ToolBar.Open		打开文件
-    tmenu ToolBar.Save		保存当前文件
-    tmenu ToolBar.SaveAll	保存全部文件
-    tmenu ToolBar.Print		打印
-    tmenu ToolBar.Undo		撤销
-    tmenu ToolBar.Redo		重做
-    tmenu ToolBar.Cut		剪切到剪贴板
-    tmenu ToolBar.Copy		复制到剪贴板
-    tmenu ToolBar.Paste		从剪贴板粘贴
-    tmenu ToolBar.Find		查找...
-    tmenu ToolBar.FindNext	查找下一个
-    tmenu ToolBar.FindPrev	查找上一个
-    tmenu ToolBar.Replace	查找和替换...
-    tmenu ToolBar.LoadSesn	加载会话
-    tmenu ToolBar.SaveSesn	保存当前会话
-    tmenu ToolBar.RunScript	运行 Vim 脚本
-    tmenu ToolBar.Make		执行 Make (:make)
-    tmenu ToolBar.RunCtags	在当前目录建立 tags (!ctags -R .)
-    tmenu ToolBar.TagJump	跳转到光标位置的 tag
-    tmenu ToolBar.Help		Vim 帮助
-    tmenu ToolBar.FindHelp	查找 Vim 帮助
+    let did_toolbar_tmenu = 1
+    tmenu ToolBar.Open			打开文件
+    tmenu ToolBar.Save			保存当前文件
+    tmenu ToolBar.SaveAll		全部保存
+    tmenu ToolBar.Print			打印
+    tmenu ToolBar.Undo			撤销
+    tmenu ToolBar.Redo			恢复
+    tmenu ToolBar.Cut			剪切到剪贴板
+    tmenu ToolBar.Copy			复制到剪贴板
+    tmenu ToolBar.Paste			从剪贴板粘贴
+    if !has("gui_athena")
+      tmenu ToolBar.Replace		查找和替换...
+      tmenu ToolBar.FindNext	查找下一个
+      tmenu ToolBar.FindPrev	查找上一个
+    endif
+    tmenu ToolBar.LoadSesn		加载会话
+    tmenu ToolBar.SaveSesn		保存当前会话
+    tmenu ToolBar.RunScript		运行 Vim 脚本
+    tmenu ToolBar.Make			生成当前项目 (:make)
+    tmenu ToolBar.RunCtags		在当前目录生成标记(Tags) (!ctags -R .)
+    tmenu ToolBar.TagJump		跳转到光标所在标记(Tag)
+    tmenu ToolBar.Help			Vim 帮助
+    tmenu ToolBar.FindHelp		在 Vim 帮助中查找
   endfun
 endif
+" }}}
 
 " Syntax menu
-menutrans &Syntax			语法(&S)
-menutrans &Show\ filetypes\ in\ menu	在菜单中显示文件类型(&S)
-menutrans &Off				关闭(&O)
-menutrans &Manual			手工(&M)
-menutrans A&utomatic			自动(&U)
-menutrans on/off\ for\ &This\ file	仅对这个文件开/关(&T)
-menutrans Co&lor\ test			色彩测试(&L)
-menutrans &Highlight\ test		高亮测试(&H)
-menutrans &Convert\ to\ HTML		转换成\ HTML(&C)
-menutrans Set\ '&syntax'\ only		仅设定\ 'syntax'(&S)
-menutrans Set\ '&filetype'\ too		也设定\ 'filetype'(&F)
+menutrans &Syntax	语法(&S)
+" Syntax menuitems {{{1
+menutrans &Show\ File\ Types\ in\ Menu	在菜单中显示文件类型(&S)
+menutrans &Off							关闭(&O)
+menutrans &Manual						手动(&M)
+menutrans A&utomatic					自动(&U)
+menutrans On/Off\ for\ &This\ File		只对这个文件开/关(&T)
+menutrans Co&lor\ Test					色彩测试(&L)
+menutrans &Highlight\ Test				高亮测试(&H)
+menutrans &Convert\ to\ HTML			转换成\ HTML(&C)
+" From synmenu.vim
+menutrans Set\ '&syntax'\ Only			只设置\ 'syntax'(&S)
+menutrans Set\ '&filetype'\ Too			也设置\ 'filetype'(&F)
+" }}}
+
+" Netrw menu {{{1
+" Plugin loading may be after menu translation
+" So giveup testing if Netrw Plugin is loaded
+" if exists("g:loaded_netrwPlugin")
+  menutrans Help<tab><F1>					帮助<tab><F1>
+  menutrans Bookmarks						书签
+  menutrans History							历史记录
+  menutrans Go\ Up\ Directory<tab>-			向上一级<tab>-
+  menutrans Apply\ Special\ Viewer<tab>x	用默认程序打开<tab>x
+  menutrans Bookmarks\ and\ History			书签和历史记录
+  " Netrw.Bookmarks and History menuitems {{{2
+  menutrans Bookmark\ Current\ Directory<tab>mb		添加书签<tab>mb
+  menutrans Bookmark\ Delete						移除书签
+  menutrans Goto\ Prev\ Dir\ (History)<tab>u		后退(历史记录)<tab>u
+  menutrans Goto\ Next\ Dir\ (History)<tab>U		前进(历史记录)<tab>U
+  menutrans List<tab>qb								完整列表<tab>qb
+  " }}}
+  menutrans Browsing\ Control				控制
+  " Netrw.Browsing Control menuitems {{{2
+  menutrans Horizontal\ Split<tab>o					在拆分窗口打开<tab>o
+  menutrans Vertical\ Split<tab>v					在垂直拆分窗口打开<tab>v
+  menutrans New\ Tab<tab>t							在标签页打开<tab>t	
+  menutrans Preview<tab>p							预览<tab>p
+  menutrans Edit\ File\ Hiding\ List<tab><ctrl-h>	编辑隐藏条件(Hiding\ List)<tab><ctrl-h>
+  menutrans Edit\ Sorting\ Sequence<tab>S			编辑排序条件(Sorting\ Sequence)<tab>S
+  menutrans Quick\ Hide/Unhide\ Dot\ Files<tab>gh	快速隐藏/显示以\.开头的文件<tab>gh
+  menutrans Refresh\ Listing<tab><ctrl-l>			刷新<tab><ctrl-l>
+  menutrans Settings/Options<tab>:NetrwSettings		设置/选项<tab>:NetrwSettings
+  " }}}
+  menutrans Delete\ File/Directory<tab>D	删除文件/目录<tab>D
+  menutrans Edit\ File/Dir					编辑文件/目录
+  " Netrw.Edit File menuitems {{{2
+  menutrans Create\ New\ File<tab>%				新建文件<tab>%
+  menutrans In\ Current\ Window<tab><cr>		在当前窗口<tab><cr>
+  menutrans Preview\ File/Directory<tab>p		预览文件/目录<tab>p
+  menutrans In\ Previous\ Window<tab>P			在上一个窗口<tab>P
+  menutrans In\ New\ Window<tab>o				在新窗口<tab>o
+  menutrans In\ New\ Tab<tab>t					在新标签页<tab>t
+  menutrans In\ New\ Vertical\ Window<tab>v		在新垂直窗口<tab>v
+  " }}}
+  menutrans Explore							浏览
+  " Netrw.Explore menuitems {{{2
+  menutrans Directory\ Name															指定目录名
+  menutrans Filenames\ Matching\ Pattern\ (curdir\ only)<tab>:Explore\ */			匹配指定文件名模式(当前目录)<tab>:Explore\ */
+  menutrans Filenames\ Matching\ Pattern\ (+subdirs)<tab>:Explore\ **/				匹配指定文件名模式(含子目录)<tab>:Explore\ **/
+  menutrans Files\ Containing\ String\ Pattern\ (curdir\ only)<tab>:Explore\ *//	内容包含指定字符串模式(当前目录)<tab>:Explore\ *//
+  menutrans Files\ Containing\ String\ Pattern\ (+subdirs)<tab>:Explore\ **//		内容包含指定字符串模式(含子目录)<tab>:Explore\ **//
+  menutrans Next\ Match<tab>:Nexplore												下一个匹配项<tab>:Nexplore
+  menutrans Prev\ Match<tab>:Pexplore												上一个匹配项<tab>:Pexplore
+  " }}}
+  menutrans Make\ Subdirectory<tab>d		新建子目录<tab>d
+  menutrans Marked\ Files					选定的(Marked)文件
+  " Netrw.Marked Files menuitems {{{2
+  menutrans Mark\ File<tab>mf						选定(Mark)/取消<tab>mf
+  menutrans Mark\ Files\ by\ Regexp<tab>mr			用正则表达式(Regexp)选定<tab>mr
+  menutrans Hide-Show-List\ Control<tab>a			隐藏/显示<tab>a
+  menutrans Copy\ To\ Target<tab>mc					复制到目标<tab>mc
+  menutrans Delete<tab>D							删除<tab>D
+  menutrans Diff<tab>md								差异(Diff)<tab>md
+  menutrans Edit<tab>me								编辑<tab>me
+  menutrans Exe\ Cmd<tab>mx							作为参数运行命令<tab>mx
+  menutrans Move\ To\ Target<tab>mm					移动到目标<tab>mm
+  menutrans Obtain<tab>O							获取<tab>O
+  menutrans Print<tab>mp							打印<tab>mp
+  menutrans Replace<tab>R							替换<tab>R
+  menutrans Set\ Target<tab>mt						设置目标<tab>mt
+  menutrans Tag<tab>mT								生成标记文件(Tags)<tab>mT
+  menutrans Zip/Unzip/Compress/Uncompress<tab>mz	压缩/解压缩<tab>mz
+  " }}}
+  menutrans Obtain\ File<tab>O				获取文件<tab>O
+  menutrans Style							显示风格
+  " Netrw.Style menuitems {{{2
+  menutrans Listing							列表形式
+  " Netrw.Style.Listing menuitems {{{3
+  menutrans thin<tab>i	紧凑<thin)<tab>i
+  menutrans long<tab>i	详细(long)<tab>i
+  menutrans wide<tab>i	多列(wide)<tab>i
+  menutrans tree<tab>i	树状(tree)<tab>i
+  " }}}
+  menutrans Normal-Hide-Show				显示/隐藏
+  " Netrw.Style.Normal-Hide_show menuitems {{{3
+  menutrans Show\ All<tab>a		显示全部
+  menutrans Normal<tab>a		不显示隐藏文件
+  menutrans Hidden\ Only<tab>a	只显示隐藏文件
+  " }}}
+  menutrans Reverse\ Sorting\ Order<tab>r	升序/降序<tab>r
+  menutrans Sorting\ Method					排序方式
+  " Netrw.Style.Sorting Method menuitems {{{3
+  menutrans Name<tab>s		文件名<tab>s
+  menutrans Time<tab>s  	修改时间<tab>s
+  menutrans Size<tab>s  	大小<tab>s
+  menutrans Exten<tab>s		扩展名<tab>s
+  " }}}
+  " }}}
+  menutrans Rename\ File/Directory<tab>R	重命名文件/目录<tab>R
+  menutrans Set\ Current\ Directory<tab>c	设置\ Vim\ 工作目录<tab>c
+  menutrans Targets							目标
+" endif
+" }}}
 
 let &cpo = s:keepcpo
 unlet s:keepcpo
+
+" vim: set ts=4 sw=4 noet fdm=marker fdc=4 :

runtime/menu.vim

@@ -2,7 +2,7 @@
 " You can also use this as a start for your own set of menus.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2019 Jan 27
+" Last Change:	2019 Nov 10
 
 " Note that ":an" (short for ":anoremenu") is often used to make a menu work
 " in all modes and avoid side effects from mappings defined by the user.
@@ -29,7 +29,8 @@ if exists("v:lang") || &langmenu != ""
     let s:lang = v:lang
   endif
   " A language name must be at least two characters, don't accept "C"
-  if strlen(s:lang) > 1
+  " Also skip "en_US" to avoid picking up "en_gb" translations.
+  if strlen(s:lang) > 1 && s:lang !~? '^en_us'
     " When the language does not include the charset add 'encoding'
     if s:lang =~ '^\a\a$\|^\a\a_\a\a$'
       let s:lang = s:lang . '.' . &enc
@@ -158,6 +159,9 @@ an 20.335 &Edit.-SEP1-				<Nop>
 vnoremenu 20.340 &Edit.Cu&t<Tab>"+x		"+x
 vnoremenu 20.350 &Edit.&Copy<Tab>"+y		"+y
 cnoremenu 20.350 &Edit.&Copy<Tab>"+y		<C-Y>
+if exists(':tlmenu')
+  tlnoremenu 20.350 &Edit.&Copy<Tab>"+y 	<C-W>:<C-Y><CR>
+endif
 nnoremenu 20.360 &Edit.&Paste<Tab>"+gP		"+gP
 cnoremenu	 &Edit.&Paste<Tab>"+gP		<C-R>+
 if exists(':tlmenu')
@@ -568,7 +572,7 @@ func! s:XxdConv()
     %!mc vim:xxd
   else
     call s:XxdFind()
-    exe '%!"' . g:xxdprogram . '"'
+    exe '%!' . g:xxdprogram
   endif
   if getline(1) =~ "^0000000:"		" only if it worked
     set ft=xxd
@@ -582,7 +586,7 @@ func! s:XxdBack()
     %!mc vim:xxd -r
   else
     call s:XxdFind()
-    exe '%!"' . g:xxdprogram . '" -r'
+    exe '%!' . g:xxdprogram . ' -r'
   endif
   set ft=
   doautocmd filetypedetect BufReadPost
@@ -594,6 +598,9 @@ func! s:XxdFind()
     " On the PC xxd may not be in the path but in the install directory
     if has("win32") && !executable("xxd")
       let g:xxdprogram = $VIMRUNTIME . (&shellslash ? '/' : '\') . "xxd.exe"
+      if g:xxdprogram =~ ' '
+	let g:xxdprogram = '"' .. g:xxdprogram .. '"'
+      endif
     else
       let g:xxdprogram = "xxd"
     endif

runtime/optwin.vim

@@ -1,7 +1,7 @@
 " These commands create the option window.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2019 Aug 20
+" Last Change:	2019 Nov 07
 
 " If there already is an option window, jump to that one.
 let buf = bufnr('option-window')
@@ -429,6 +429,9 @@ if has("syntax")
   call append("$", "cursorline\thighlight the screen line of the cursor")
   call append("$", "\t(local to window)")
   call <SID>BinOptionL("cul")
+  call append("$", "cursorlineopt\tspecifies which area 'cursorline' highlights")
+  call append("$", "\t(local to window)")
+  call <SID>OptionL("culopt")
   call append("$", "colorcolumn\tcolumns to highlight")
   call append("$", "\t(local to window)")
   call <SID>OptionL("cc")
@@ -591,6 +594,10 @@ call <SID>OptionG("mouse", &mouse)
 if has("gui")
   call append("$", "mousefocus\tthe window with the mouse pointer becomes the current one")
   call <SID>BinOptionG("mousef", &mousef)
+endif
+call append("$", "scrollfocus\tthe window with the mouse pointer scrolls with the mouse wheel")
+call <SID>BinOptionG("scf", &scf)
+if has("gui")
   call append("$", "mousehide\thide the mouse pointer while typing")
   call <SID>BinOptionG("mh", &mh)
 endif