patch 8.0.0682: no test for synIDtrans()

Problem:    No test for synIDtrans().
Solution:   Add a test. (Dominique Pelle, closes #1796)

.gitignore

@@ -78,6 +78,7 @@ src/testdir/test.log
 src/testdir/dostmp/*
 src/testdir/messages
 src/testdir/viminfo
+src/testdir/opt_test.vim
 src/memfile_test
 src/json_test
 src/message_test

.travis.yml

@@ -19,14 +19,12 @@ env:
   - BUILD=yes TEST=test COVERAGE=no FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
     "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
     # ASAN build
-  - BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -fsanitize=address -fno-omit-frame-pointer" FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no
+  - BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+    FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan"
     "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
 
 sudo: false
 
-git:
-  depth: 10
-
 # instead of a 2*2*8 matrix (2*os + 2*compiler + 8*env),
 # exclude some builds on mac os x and linux
 # linux: 2*compiler + 5*env + mac: 2*compiler + 2*env
@@ -42,11 +40,13 @@ matrix:
       env: BUILD=yes TEST=scripttests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
             "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp'"
     - os: osx
-      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -fsanitize=address -fno-omit-frame-pointer" FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no
+      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+            FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan"
             "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
     - os: linux
       compiler: gcc
-      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -fsanitize=address -fno-omit-frame-pointer" FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no
+      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+            FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan"
             "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
     - os: linux
       compiler: clang
@@ -92,9 +92,13 @@ script:
   - if [ "x$SHADOWOPT" != x ]; then make -C src shadow; fi
   - (cd ${SRCDIR} && ./configure --with-features=$FEATURES $CONFOPT --enable-fail-if-missing && if [ "$BUILD" = "yes" ]; then make -j$NPROC; fi)
   - if [ "$BUILD" = "yes" ]; then ${SRCDIR}/vim --version; fi
+  - if [ -n "$ASAN_OPTIONS" ]; then export PATH=/usr/lib/llvm-$(clang -v 2>&1 | sed -n 's/.*version \([1-9]\.[0-9][0-9]*\).*/\1/p')/bin:$PATH; fi
   - make $SHADOWOPT $TEST
+  - if [ -n "$ASAN_OPTIONS" ]; then for log in $(find -type f -name 'asan.*' -size +0); do cat "$log"; err=1; done; fi
+  - if [ -n "$err" ]; then exit 1; fi
 
 after_success:
   - if [ "$COVERAGE" = "yes" ]; then ~/.local/bin/coveralls -b $SRCDIR -x .xs -e ${SRCDIR}/xxd -e ${SRCDIR}/if_perl.c --encodings utf-8 latin-1 EUC-KR; fi
+  - if [ "$COVERAGE" = "yes" ]; then  cd $SRCDIR && bash <(curl -s https://codecov.io/bash) ; fi
 
 # vim:set sts=2 sw=2 tw=0 et:

Filelist

@@ -24,6 +24,7 @@ SRC_ALL =	\
 		src/edit.c \
 		src/eval.c \
 		src/evalfunc.c \
+		src/ex_cmdidxs.h \
 		src/ex_cmds.c \
 		src/ex_cmds.h \
 		src/ex_cmds2.c \
@@ -97,6 +98,7 @@ SRC_ALL =	\
 		src/tee/tee.c \
 		src/xxd/xxd.c \
 		src/main.aap \
+		src/testdir/gen_opt_test.vim \
 		src/testdir/main.aap \
 		src/testdir/README.txt \
 		src/testdir/Make_all.mak \
@@ -105,7 +107,11 @@ SRC_ALL =	\
 		src/testdir/sautest/autoload/*.vim \
 		src/testdir/runtest.vim \
 		src/testdir/shared.vim \
+		src/testdir/view_util.vim \
 		src/testdir/setup.vim \
+		src/testdir/gui_init.vim \
+		src/testdir/setup_gui.vim \
+		src/testdir/gui_preinit.vim \
 		src/testdir/test[0-9]*.ok \
 		src/testdir/test[0-9]*a.ok \
 		src/testdir/test_[a-z]*.ok \
@@ -210,6 +216,7 @@ SRC_UNIX =	\
 		src/config.mk.in \
 		src/configure \
 		src/configure.ac \
+		src/create_cmdidxs.vim \
 		src/gui_at_fs.c \
 		src/gui_at_sb.c \
 		src/gui_at_sb.h \
@@ -233,7 +240,7 @@ SRC_UNIX =	\
 		src/link.sh \
 		src/installman.sh \
 		src/installml.sh \
-		src/mkinstalldirs \
+		src/install-sh \
 		src/os_unix.c \
 		src/os_unix.h \
 		src/os_unixx.h \
@@ -719,7 +726,6 @@ EXTRA =		\
 		farsi/README.txt \
 		farsi/fonts/*/far-* \
 		runtime/vimlogo.xpm \
-		src/swis.s \
 		src/tee/Makefile \
 		src/tee/Make_mvc.mak \
 		src/tee/tee.c \

Makefile

@@ -120,8 +120,9 @@ MINOR = 0
 #
 # MS-Windows:
 # - Run make on Unix to update the ".mo" files.
-# - Get libintl-8.dll and libiconv-2.dll. E.g. from
+# - Get libintl-8.dll, libiconv-2.dll and libgcc_s_sjlj-1.dll. E.g. from
 #   https://mlocati.github.io/gettext-iconv-windows/ .
+#   Use the "shared-32.zip file and extract the archive to get the files.
 #   Put them in the top directory, "make dosrt" uses them.
 # - > make dossrc
 #   > make dosrt
@@ -468,6 +469,7 @@ dosrt_files: dist prepare no_title.vim
 	    done
 	cp libintl-8.dll dist/vim/$(VIMRTDIR)/
 	cp libiconv-2.dll dist/vim/$(VIMRTDIR)/
+	cp libgcc_s_sjlj-1.dll dist/vim/$(VIMRTDIR)/
 
 
 # Used before uploading.  Don't delete the AAPDIR/sign files!

README.md

@@ -1,5 +1,6 @@
 `README.md` for version 8.0 of Vim: Vi IMproved.
 [![Build Status](https://travis-ci.org/vim/vim.svg?branch=master)](https://travis-ci.org/vim/vim)
+[![Coverage Status](https://codecov.io/gh/vim/vim/coverage.svg?branch=master)](https://codecov.io/gh/vim/vim?branch=master)
 [![Coverage Status](https://coveralls.io/repos/vim/vim/badge.svg?branch=master&service=github)](https://coveralls.io/github/vim/vim?branch=master)
 [![Appveyor Build status](https://ci.appveyor.com/api/projects/status/o2qht2kjm02sgghk?svg=true)](https://ci.appveyor.com/project/chrisbra/vim)
 [![Coverity Scan](https://scan.coverity.com/projects/241/badge.svg)](https://scan.coverity.com/projects/vim)

nsis/gvim.nsi

@@ -87,6 +87,7 @@ UninstPage instfiles
 Function .onInit
   MessageBox MB_YESNO|MB_ICONQUESTION \
 	"This will install Vim ${VER_MAJOR}.${VER_MINOR} on your computer.$\n Continue?" \
+	/SD IDYES \
 	IDYES NoAbort
 	    Abort ; causes installer to quit.
 	NoAbort:
@@ -385,6 +386,7 @@ SectionEnd
 		File ${VIMRT}\libintl-8.dll
 		File ${VIMRT}\libiconv-2.dll
 		File /nonfatal ${VIMRT}\libwinpthread-1.dll
+		File /nonfatal ${VIMRT}\libgcc_s_sjlj-1.dll
 	SectionEnd
 !endif
 

runtime/autoload/javascriptcomplete.vim

@@ -1,7 +1,7 @@
 " Vim completion script
 " Language:	Java Script
 " Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change:	2006 Apr 30
+" Last Change:	2017 Mar 04
 
 function! javascriptcomplete#CompleteJS(findstart, base)
   if a:findstart
@@ -563,7 +563,7 @@ function! javascriptcomplete#CompleteJS(findstart, base)
 	for i in arguments
 		let g:ia = i
 		let f_elements = matchlist(i, 'function\s\+\(\k\+\)\s*(\(.\{-}\))')
-		if len(f_elements) == 3
+		if len(f_elements) >= 3
 			let b:js_menuinfo[f_elements[1].'('] = f_elements[2]
 		endif
 	endfor

runtime/autoload/rust.vim

@@ -0,0 +1,415 @@
+" Author: Kevin Ballard
+" Description: Helper functions for Rust commands/mappings
+" Last Modified: May 27, 2014
+" For bugs, patches and license go to https://github.com/rust-lang/rust.vim
+
+" Jump {{{1
+
+function! rust#Jump(mode, function) range
+	let cnt = v:count1
+	normal! m'
+	if a:mode ==# 'v'
+		norm! gv
+	endif
+	let foldenable = &foldenable
+	set nofoldenable
+	while cnt > 0
+		execute "call <SID>Jump_" . a:function . "()"
+		let cnt = cnt - 1
+	endwhile
+	let &foldenable = foldenable
+endfunction
+
+function! s:Jump_Back()
+	call search('{', 'b')
+	keepjumps normal! w99[{
+endfunction
+
+function! s:Jump_Forward()
+	normal! j0
+	call search('{', 'b')
+	keepjumps normal! w99[{%
+	call search('{')
+endfunction
+
+" Run {{{1
+
+function! rust#Run(bang, args)
+	let args = s:ShellTokenize(a:args)
+	if a:bang
+		let idx = index(l:args, '--')
+		if idx != -1
+			let rustc_args = idx == 0 ? [] : l:args[:idx-1]
+			let args = l:args[idx+1:]
+		else
+			let rustc_args = l:args
+			let args = []
+		endif
+	else
+		let rustc_args = []
+	endif
+
+	let b:rust_last_rustc_args = l:rustc_args
+	let b:rust_last_args = l:args
+
+	call s:WithPath(function("s:Run"), rustc_args, args)
+endfunction
+
+function! s:Run(dict, rustc_args, args)
+	let exepath = a:dict.tmpdir.'/'.fnamemodify(a:dict.path, ':t:r')
+	if has('win32')
+		let exepath .= '.exe'
+	endif
+
+	let relpath = get(a:dict, 'tmpdir_relpath', a:dict.path)
+	let rustc_args = [relpath, '-o', exepath] + a:rustc_args
+
+	let rustc = exists("g:rustc_path") ? g:rustc_path : "rustc"
+
+	let pwd = a:dict.istemp ? a:dict.tmpdir : ''
+	let output = s:system(pwd, shellescape(rustc) . " " . join(map(rustc_args, 'shellescape(v:val)')))
+	if output != ''
+		echohl WarningMsg
+		echo output
+		echohl None
+	endif
+	if !v:shell_error
+		exe '!' . shellescape(exepath) . " " . join(map(a:args, 'shellescape(v:val)'))
+	endif
+endfunction
+
+" Expand {{{1
+
+function! rust#Expand(bang, args)
+	let args = s:ShellTokenize(a:args)
+	if a:bang && !empty(l:args)
+		let pretty = remove(l:args, 0)
+	else
+		let pretty = "expanded"
+	endif
+	call s:WithPath(function("s:Expand"), pretty, args)
+endfunction
+
+function! s:Expand(dict, pretty, args)
+	try
+		let rustc = exists("g:rustc_path") ? g:rustc_path : "rustc"
+
+		if a:pretty =~? '^\%(everybody_loops$\|flowgraph=\)'
+			let flag = '--xpretty'
+		else
+			let flag = '--pretty'
+		endif
+		let relpath = get(a:dict, 'tmpdir_relpath', a:dict.path)
+		let args = [relpath, '-Z', 'unstable-options', l:flag, a:pretty] + a:args
+		let pwd = a:dict.istemp ? a:dict.tmpdir : ''
+		let output = s:system(pwd, shellescape(rustc) . " " . join(map(args, 'shellescape(v:val)')))
+		if v:shell_error
+			echohl WarningMsg
+			echo output
+			echohl None
+		else
+			new
+			silent put =output
+			1
+			d
+			setl filetype=rust
+			setl buftype=nofile
+			setl bufhidden=hide
+			setl noswapfile
+			" give the buffer a nice name
+			let suffix = 1
+			let basename = fnamemodify(a:dict.path, ':t:r')
+			while 1
+				let bufname = basename
+				if suffix > 1 | let bufname .= ' ('.suffix.')' | endif
+				let bufname .= '.pretty.rs'
+				if bufexists(bufname)
+					let suffix += 1
+					continue
+				endif
+				exe 'silent noautocmd keepalt file' fnameescape(bufname)
+				break
+			endwhile
+		endif
+	endtry
+endfunction
+
+function! rust#CompleteExpand(lead, line, pos)
+	if a:line[: a:pos-1] =~ '^RustExpand!\s*\S*$'
+		" first argument and it has a !
+		let list = ["normal", "expanded", "typed", "expanded,identified", "flowgraph=", "everybody_loops"]
+		if !empty(a:lead)
+			call filter(list, "v:val[:len(a:lead)-1] == a:lead")
+		endif
+		return list
+	endif
+
+	return glob(escape(a:lead, "*?[") . '*', 0, 1)
+endfunction
+
+" Emit {{{1
+
+function! rust#Emit(type, args)
+	let args = s:ShellTokenize(a:args)
+	call s:WithPath(function("s:Emit"), a:type, args)
+endfunction
+
+function! s:Emit(dict, type, args)
+	try
+		let output_path = a:dict.tmpdir.'/output'
+
+		let rustc = exists("g:rustc_path") ? g:rustc_path : "rustc"
+
+		let relpath = get(a:dict, 'tmpdir_relpath', a:dict.path)
+		let args = [relpath, '--emit', a:type, '-o', output_path] + a:args
+		let pwd = a:dict.istemp ? a:dict.tmpdir : ''
+		let output = s:system(pwd, shellescape(rustc) . " " . join(map(args, 'shellescape(v:val)')))
+		if output != ''
+			echohl WarningMsg
+			echo output
+			echohl None
+		endif
+		if !v:shell_error
+			new
+			exe 'silent keepalt read' fnameescape(output_path)
+			1
+			d
+			if a:type == "llvm-ir"
+				setl filetype=llvm
+				let extension = 'll'
+			elseif a:type == "asm"
+				setl filetype=asm
+				let extension = 's'
+			endif
+			setl buftype=nofile
+			setl bufhidden=hide
+			setl noswapfile
+			if exists('l:extension')
+				" give the buffer a nice name
+				let suffix = 1
+				let basename = fnamemodify(a:dict.path, ':t:r')
+				while 1
+					let bufname = basename
+					if suffix > 1 | let bufname .= ' ('.suffix.')' | endif
+					let bufname .= '.'.extension
+					if bufexists(bufname)
+						let suffix += 1
+						continue
+					endif
+					exe 'silent noautocmd keepalt file' fnameescape(bufname)
+					break
+				endwhile
+			endif
+		endif
+	endtry
+endfunction
+
+" Utility functions {{{1
+
+" Invokes func(dict, ...)
+" Where {dict} is a dictionary with the following keys:
+"   'path' - The path to the file
+"   'tmpdir' - The path to a temporary directory that will be deleted when the
+"              function returns.
+"   'istemp' - 1 if the path is a file inside of {dict.tmpdir} or 0 otherwise.
+" If {istemp} is 1 then an additional key is provided:
+"   'tmpdir_relpath' - The {path} relative to the {tmpdir}.
+"
+" {dict.path} may be a path to a file inside of {dict.tmpdir} or it may be the
+" existing path of the current buffer. If the path is inside of {dict.tmpdir}
+" then it is guaranteed to have a '.rs' extension.
+function! s:WithPath(func, ...)
+	let buf = bufnr('')
+	let saved = {}
+	let dict = {}
+	try
+		let saved.write = &write
+		set write
+		let dict.path = expand('%')
+		let pathisempty = empty(dict.path)
+
+		" Always create a tmpdir in case the wrapped command wants it
+		let dict.tmpdir = tempname()
+		call mkdir(dict.tmpdir)
+
+		if pathisempty || !saved.write
+			let dict.istemp = 1
+			" if we're doing this because of nowrite, preserve the filename
+			if !pathisempty
+				let filename = expand('%:t:r').".rs"
+			else
+				let filename = 'unnamed.rs'
+			endif
+			let dict.tmpdir_relpath = filename
+			let dict.path = dict.tmpdir.'/'.filename
+
+			let saved.mod = &mod
+			set nomod
+
+			silent exe 'keepalt write! ' . fnameescape(dict.path)
+			if pathisempty
+				silent keepalt 0file
+			endif
+		else
+			let dict.istemp = 0
+			update
+		endif
+
+		call call(a:func, [dict] + a:000)
+	finally
+		if bufexists(buf)
+			for [opt, value] in items(saved)
+				silent call setbufvar(buf, '&'.opt, value)
+				unlet value " avoid variable type mismatches
+			endfor
+		endif
+		if has_key(dict, 'tmpdir') | silent call s:RmDir(dict.tmpdir) | endif
+	endtry
+endfunction
+
+function! rust#AppendCmdLine(text)
+	call setcmdpos(getcmdpos())
+	let cmd = getcmdline() . a:text
+	return cmd
+endfunction
+
+" Tokenize the string according to sh parsing rules
+function! s:ShellTokenize(text)
+	" states:
+	" 0: start of word
+	" 1: unquoted
+	" 2: unquoted backslash
+	" 3: double-quote
+	" 4: double-quoted backslash
+	" 5: single-quote
+	let l:state = 0
+	let l:current = ''
+	let l:args = []
+	for c in split(a:text, '\zs')
+		if l:state == 0 || l:state == 1 " unquoted
+			if l:c ==# ' '
+				if l:state == 0 | continue | endif
+				call add(l:args, l:current)
+				let l:current = ''
+				let l:state = 0
+			elseif l:c ==# '\'
+				let l:state = 2
+			elseif l:c ==# '"'
+				let l:state = 3
+			elseif l:c ==# "'"
+				let l:state = 5
+			else
+				let l:current .= l:c
+				let l:state = 1
+			endif
+		elseif l:state == 2 " unquoted backslash
+			if l:c !=# "\n" " can it even be \n?
+				let l:current .= l:c
+			endif
+			let l:state = 1
+		elseif l:state == 3 " double-quote
+			if l:c ==# '\'
+				let l:state = 4
+			elseif l:c ==# '"'
+				let l:state = 1
+			else
+				let l:current .= l:c
+			endif
+		elseif l:state == 4 " double-quoted backslash
+			if stridx('$`"\', l:c) >= 0
+				let l:current .= l:c
+			elseif l:c ==# "\n" " is this even possible?
+				" skip it
+			else
+				let l:current .= '\'.l:c
+			endif
+			let l:state = 3
+		elseif l:state == 5 " single-quoted
+			if l:c == "'"
+				let l:state = 1
+			else
+				let l:current .= l:c
+			endif
+		endif
+	endfor
+	if l:state != 0
+		call add(l:args, l:current)
+	endif
+	return l:args
+endfunction
+
+function! s:RmDir(path)
+	" sanity check; make sure it's not empty, /, or $HOME
+	if empty(a:path)
+		echoerr 'Attempted to delete empty path'
+		return 0
+	elseif a:path == '/' || a:path == $HOME
+		echoerr 'Attempted to delete protected path: ' . a:path
+		return 0
+	endif
+	return system("rm -rf " . shellescape(a:path))
+endfunction
+
+" Executes {cmd} with the cwd set to {pwd}, without changing Vim's cwd.
+" If {pwd} is the empty string then it doesn't change the cwd.
+function! s:system(pwd, cmd)
+	let cmd = a:cmd
+	if !empty(a:pwd)
+		let cmd = 'cd ' . shellescape(a:pwd) . ' && ' . cmd
+	endif
+	return system(cmd)
+endfunction
+
+" Playpen Support {{{1
+" Parts of gist.vim by Yasuhiro Matsumoto <mattn.jp@gmail.com> reused
+" gist.vim available under the BSD license, available at
+" http://github.com/mattn/gist-vim
+function! s:has_webapi()
+    if !exists("*webapi#http#post")
+	try
+	    call webapi#http#post()
+	catch
+	endtry
+    endif
+    return exists("*webapi#http#post")
+endfunction
+
+function! rust#Play(count, line1, line2, ...) abort
+    redraw
+
+    let l:rust_playpen_url = get(g:, 'rust_playpen_url', 'https://play.rust-lang.org/')
+    let l:rust_shortener_url = get(g:, 'rust_shortener_url', 'https://is.gd/')
+
+    if !s:has_webapi()
+	echohl ErrorMsg | echomsg ':RustPlay depends on webapi.vim (https://github.com/mattn/webapi-vim)' | echohl None
+	return
+    endif
+
+    let bufname = bufname('%')
+    if a:count < 1
+	let content = join(getline(a:line1, a:line2), "\n")
+    else
+	let save_regcont = @"
+	let save_regtype = getregtype('"')
+	silent! normal! gvy
+	let content = @"
+	call setreg('"', save_regcont, save_regtype)
+    endif
+
+    let body = l:rust_playpen_url."?code=".webapi#http#encodeURI(content)
+
+    if strlen(body) > 5000
+	echohl ErrorMsg | echomsg 'Buffer too large, max 5000 encoded characters ('.strlen(body).')' | echohl None
+	return
+    endif
+
+    let payload = "format=simple&url=".webapi#http#encodeURI(body)
+    let res = webapi#http#post(l:rust_shortener_url.'create.php', payload, {})
+    let url = res.content
+
+    redraw | echomsg 'Done: '.url
+endfunction
+
+" }}}1
+
+" vim: set noet sw=8 ts=8:

runtime/autoload/rustfmt.vim

@@ -0,0 +1,107 @@
+" Author: Stephen Sugden <stephen@stephensugden.com>
+"
+" Adapted from https://github.com/fatih/vim-go
+" For bugs, patches and license go to https://github.com/rust-lang/rust.vim
+
+if !exists("g:rustfmt_autosave")
+	let g:rustfmt_autosave = 0
+endif
+
+if !exists("g:rustfmt_command")
+	let g:rustfmt_command = "rustfmt"
+endif
+
+if !exists("g:rustfmt_options")
+	let g:rustfmt_options = ""
+endif
+
+if !exists("g:rustfmt_fail_silently")
+	let g:rustfmt_fail_silently = 0
+endif
+
+let s:got_fmt_error = 0
+
+function! s:RustfmtCommandRange(filename, line1, line2)
+	let l:arg = {"file": shellescape(a:filename), "range": [a:line1, a:line2]}
+	return printf("%s %s --write-mode=overwrite --file-lines '[%s]'", g:rustfmt_command, g:rustfmt_options, json_encode(l:arg))
+endfunction
+
+function! s:RustfmtCommand(filename)
+	return g:rustfmt_command . " --write-mode=overwrite " . g:rustfmt_options . " " . shellescape(a:filename)
+endfunction
+
+function! s:RunRustfmt(command, curw, tmpname)
+	if exists("*systemlist")
+		let out = systemlist(a:command)
+	else
+		let out = split(system(a:command), '\r\?\n')
+	endif
+
+	if v:shell_error == 0 || v:shell_error == 3
+		" remove undo point caused via BufWritePre
+		try | silent undojoin | catch | endtry
+
+		" Replace current file with temp file, then reload buffer
+		call rename(a:tmpname, expand('%'))
+		silent edit!
+		let &syntax = &syntax
+
+		" only clear location list if it was previously filled to prevent
+		" clobbering other additions
+		if s:got_fmt_error
+			let s:got_fmt_error = 0
+			call setloclist(0, [])
+			lwindow
+		endif
+	elseif g:rustfmt_fail_silently == 0
+		" otherwise get the errors and put them in the location list
+		let errors = []
+
+		for line in out
+			" src/lib.rs:13:5: 13:10 error: expected `,`, or `}`, found `value`
+			let tokens = matchlist(line, '^\(.\{-}\):\(\d\+\):\(\d\+\):\s*\(\d\+:\d\+\s*\)\?\s*error: \(.*\)')
+			if !empty(tokens)
+				call add(errors, {"filename": @%,
+						 \"lnum":     tokens[2],
+						 \"col":      tokens[3],
+						 \"text":     tokens[5]})
+			endif
+		endfor
+
+		if empty(errors)
+			% | " Couldn't detect rustfmt error format, output errors
+		endif
+
+		if !empty(errors)
+			call setloclist(0, errors, 'r')
+			echohl Error | echomsg "rustfmt returned error" | echohl None
+		endif
+
+		let s:got_fmt_error = 1
+		lwindow
+		" We didn't use the temp file, so clean up
+		call delete(a:tmpname)
+	endif
+
+	call winrestview(a:curw)
+endfunction
+
+function! rustfmt#FormatRange(line1, line2)
+	let l:curw = winsaveview()
+	let l:tmpname = expand("%:p:h") . "/." . expand("%:p:t") . ".rustfmt"
+	call writefile(getline(1, '$'), l:tmpname)
+
+	let command = s:RustfmtCommandRange(l:tmpname, a:line1, a:line2)
+
+	call s:RunRustfmt(command, l:curw, l:tmpname)
+endfunction
+
+function! rustfmt#Format()
+	let l:curw = winsaveview()
+	let l:tmpname = expand("%:p:h") . "/." . expand("%:p:t") . ".rustfmt"
+	call writefile(getline(1, '$'), l:tmpname)
+
+	let command = s:RustfmtCommand(l:tmpname)
+
+	call s:RunRustfmt(command, l:curw, l:tmpname)
+endfunction

runtime/compiler/bdf.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:         BDF to PCF Conversion
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2006-04-19
+" Compiler:             BDF to PCF Conversion
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2006-04-19
 
 if exists("current_compiler")
   finish

runtime/compiler/cargo.vim

@@ -0,0 +1,35 @@
+" Vim compiler file
+" Compiler:         Cargo Compiler
+" Maintainer:       Damien Radtke <damienradtke@gmail.com>
+" Latest Revision:  2014 Sep 24
+" For bugs, patches and license go to https://github.com/rust-lang/rust.vim
+
+if exists('current_compiler')
+	finish
+endif
+runtime compiler/rustc.vim
+let current_compiler = "cargo"
+
+let s:save_cpo = &cpo
+set cpo&vim
+
+if exists(':CompilerSet') != 2
+	command -nargs=* CompilerSet setlocal <args>
+endif
+
+if exists('g:cargo_makeprg_params')
+	execute 'CompilerSet makeprg=cargo\ '.escape(g:cargo_makeprg_params, ' \|"').'\ $*'
+else
+	CompilerSet makeprg=cargo\ $*
+endif
+
+" Ignore general cargo progress messages
+CompilerSet errorformat+=
+			\%-G%\\s%#Downloading%.%#,
+			\%-G%\\s%#Compiling%.%#,
+			\%-G%\\s%#Finished%.%#,
+			\%-G%\\s%#error:\ Could\ not\ compile\ %.%#,
+			\%-G%\\s%#To\ learn\ more\\,%.%#
+
+let &cpo = s:save_cpo
+unlet s:save_cpo

runtime/compiler/gcc.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:         GNU C Compiler
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2010-10-14
+" Compiler:             GNU C Compiler
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2010-10-14
 " 			added line suggested by Anton Lindqvist 2016 Mar 31
 
 if exists("current_compiler")

runtime/compiler/rst.vim

@@ -1,7 +1,8 @@
 " Vim compiler file
-" Compiler:         reStructuredText Documentation Format
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2006-04-19
+" Compiler:             sphinx >= 1.0.8, http://www.sphinx-doc.org
+" Description:          reStructuredText Documentation Format
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2017-03-31
 
 if exists("current_compiler")
   finish
@@ -11,12 +12,18 @@ let current_compiler = "rst"
 let s:cpo_save = &cpo
 set cpo&vim
 
-setlocal errorformat=
-      \%f:%l:\ (%tEBUG/0)\ %m,
-      \%f:%l:\ (%tNFO/1)\ %m,
-      \%f:%l:\ (%tARNING/2)\ %m,
-      \%f:%l:\ (%tRROR/3)\ %m,
-      \%f:%l:\ (%tEVERE/3)\ %m,
+if exists(":CompilerSet") != 2
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+CompilerSet errorformat=
+      \%f\\:%l:\ %tEBUG:\ %m,
+      \%f\\:%l:\ %tNFO:\ %m,
+      \%f\\:%l:\ %tARNING:\ %m,
+      \%f\\:%l:\ %tRROR:\ %m,
+      \%f\\:%l:\ %tEVERE:\ %m,
+      \%f\\:%s:\ %tARNING:\ %m,
+      \%f\\:%s:\ %tRROR:\ %m,
       \%D%*\\a[%*\\d]:\ Entering\ directory\ `%f',
       \%X%*\\a[%*\\d]:\ Leaving\ directory\ `%f',
       \%DMaking\ %*\\a\ in\ %f

runtime/compiler/rustc.vim

@@ -0,0 +1,46 @@
+" Vim compiler file
+" Compiler:         Rust Compiler
+" Maintainer:       Chris Morgan <me@chrismorgan.info>
+" Latest Revision:  2013 Jul 12
+" For bugs, patches and license go to https://github.com/rust-lang/rust.vim
+
+if exists("current_compiler")
+	finish
+endif
+let current_compiler = "rustc"
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+if exists(":CompilerSet") != 2
+	command -nargs=* CompilerSet setlocal <args>
+endif
+
+if exists("g:rustc_makeprg_no_percent") && g:rustc_makeprg_no_percent != 0
+	CompilerSet makeprg=rustc
+else
+	CompilerSet makeprg=rustc\ \%
+endif
+
+" Old errorformat (before nightly 2016/08/10)
+CompilerSet errorformat=
+			\%f:%l:%c:\ %t%*[^:]:\ %m,
+			\%f:%l:%c:\ %*\\d:%*\\d\ %t%*[^:]:\ %m,
+			\%-G%f:%l\ %s,
+			\%-G%*[\ ]^,
+			\%-G%*[\ ]^%*[~],
+			\%-G%*[\ ]...
+
+" New errorformat (after nightly 2016/08/10)
+CompilerSet errorformat+=
+			\%-G,
+			\%-Gerror:\ aborting\ %.%#,
+			\%-Gerror:\ Could\ not\ compile\ %.%#,
+			\%Eerror:\ %m,
+			\%Eerror[E%n]:\ %m,
+			\%Wwarning:\ %m,
+			\%Inote:\ %m,
+			\%C\ %#-->\ %f:%l:%c
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/defaults.vim

@@ -1,7 +1,7 @@
 " The default vimrc file.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2016 Sep 02
+" Last change:	2017 Jun 13
 "
 " This is loaded if no vimrc file was found.
 " Except when Vim is run with "-u NONE" or "-C".
@@ -21,7 +21,16 @@ endif
 
 " Use Vim settings, rather than Vi settings (much better!).
 " This must be first, because it changes other options as a side effect.
-set nocompatible
+" Avoid side effects when it was already reset.
+if &compatible
+  set nocompatible
+endif
+
+" When the +eval feature is missing, the set command above will be skipped.
+" Use a trick to reset compatible only when the +eval feature is missing.
+silent! while 0
+  set nocompatible
+silent! endwhile
 
 " Allow backspacing over everything in insert mode.
 set backspace=indent,eol,start
@@ -97,12 +106,13 @@ if has("autocmd")
     au!
 
     " When editing a file, always jump to the last known cursor position.
-    " Don't do it when the position is invalid or when inside an event handler
-    " (happens when dropping a file on gvim).
+    " Don't do it when the position is invalid, when inside an event handler
+    " (happens when dropping a file on gvim) and for a commit message (it's
+    " likely a different one than last time).
     autocmd BufReadPost *
-      \ if line("'\"") >= 1 && line("'\"") <= line("$") |
-      \   exe "normal! g`\"" |
-      \ endif
+      \ if line("'\"") >= 1 && line("'\"") <= line("$") && &ft !~# 'commit'
+      \ |   exe "normal! g`\""
+      \ | endif
 
   augroup END
 

runtime/doc/Makefile

@@ -30,6 +30,7 @@ DOCS = \
 	filetype.txt \
 	fold.txt \
 	ft_ada.txt \
+	ft_rust.txt \
 	ft_sql.txt \
 	gui.txt \
 	gui_w32.txt \
@@ -165,6 +166,7 @@ HTMLS = \
 	filetype.html \
 	fold.html \
 	ft_ada.html \
+	ft_rust.html \
 	ft_sql.html \
 	gui.html \
 	gui_w32.html \

runtime/doc/arabic.txt

@@ -10,11 +10,11 @@ Arabic Language support (options & mappings) for Vim		*Arabic*
 
 								*E800*
 In order to use right-to-left and Arabic mapping support, it is
-necessary to compile VIM with the |+arabic| feature.
+necessary to compile Vim with the |+arabic| feature.
 
 These functions have been created by Nadim Shaikli <nadim-at-arabeyes.org>
 
-It is best to view this file with these settings within VIM's GUI: >
+It is best to view this file with these settings within Vim's GUI: >
 
 	:set encoding=utf-8
 	:set arabicshape
@@ -42,7 +42,7 @@ the user interface remains the standard Vi interface.
 
 Highlights
 ----------
-o  Editing left-to-right files as in the original VIM hasn't changed.
+o  Editing left-to-right files as in the original Vim hasn't changed.
 
 o  Viewing and editing files in right-to-left windows.	 File
    orientation is per window, so it is possible to view the same
@@ -52,7 +52,7 @@ o  No special terminal with right-to-left capabilities is required.
    The right-to-left changes are completely hardware independent.
    Only Arabic fonts are necessary.
 
-o  Compatible with the original VIM.   Almost all features work in
+o  Compatible with the original Vim.   Almost all features work in
    right-to-left mode (there are liable to be bugs).
 
 o  Changing keyboard mapping and reverse insert modes using a single
@@ -66,14 +66,14 @@ o  While in Arabic mode, numbers are entered from left to right.  Upon
 
 o  Arabic keymapping on the command line in reverse insert mode.
 
-o  Proper Bidirectional functionality is possible given VIM is
+o  Proper Bidirectional functionality is possible given Vim is
    started within a Bidi capable terminal emulator.
 
 
 Arabic Fonts						*arabicfonts*
 ------------
 
-VIM requires monospaced fonts of which there are many out there.
+Vim requires monospaced fonts of which there are many out there.
 Arabic requires ISO-8859-6 as well as Presentation Form-B fonts
 (without Form-B, Arabic will _NOT_ be usable).	It is highly
 recommended that users search for so-called 'ISO-10646-1' fonts.
@@ -96,13 +96,13 @@ o  Installation of fonts for X Window systems (Unix/Linux)
 
 Usage
 -----
-Prior to the actual usage of Arabic within VIM, a number of settings
+Prior to the actual usage of Arabic within Vim, a number of settings
 need to be accounted for and invoked.
 
 o  Setting the Arabic fonts
 
-   +  For VIM GUI set the 'guifont' to your_ARABIC_FONT.  This is done
-      by entering the following command in the VIM window.
+   +  For Vim GUI set the 'guifont' to your_ARABIC_FONT.  This is done
+      by entering the following command in the Vim window.
 >
 		:set guifont=your_ARABIC_FONT
 <
@@ -115,7 +115,7 @@ o  Setting the Arabic fonts
       you can include ':set guifont=your_ARABIC_FONT' to your .vimrc
       file.
 
-   +  Under the X Window environment, you can also start VIM with
+   +  Under the X Window environment, you can also start Vim with
       '-fn your_ARABIC_FONT' option.
 
 o  Setting the appropriate character Encoding
@@ -124,7 +124,7 @@ o  Setting the appropriate character Encoding
 >
 		:set encoding=utf-8
 <
-   to your .vimrc file (entering the command manually into you VIM
+   to your .vimrc file (entering the command manually into you Vim
    window is highly discouraged).  In short, include ':set
    encoding=utf-8' to your .vimrc file.
 
@@ -137,11 +137,11 @@ o  Setting the appropriate character Encoding
 o  Enable Arabic settings [short-cut]
 
    In order to simplify and streamline things, you can either invoke
-   VIM with the command-line option,
+   Vim with the command-line option,
 
      % vim -A my_utf8_arabic_file ...
 
-   or enable 'arabic' via the following command within VIM
+   or enable 'arabic' via the following command within Vim
 >
 		:set arabic
 <
@@ -189,7 +189,7 @@ o  Enable Arabic settings [short-cut]
 >
 		:set keymap=arabic
 <
-      in your VIM window.  You can also append the 'keymap' set command to
+      in your Vim window.  You can also append the 'keymap' set command to
       your .vimrc file.  In other words, you can include ':set keymap=arabic'
       to your .vimrc file.
 
@@ -202,7 +202,7 @@ o  Enable Arabic settings [short-cut]
 
    +  Arabic deletion of a combined pair character
 
-      By default VIM has the 'delcombine' option disabled.  This option
+      By default Vim has the 'delcombine' option disabled.  This option
       allows the deletion of ALEF in a LAM_ALEF (LAA) combined character
       and still retain the LAM (i.e. it reverts to treating the combined
       character as its natural two characters form -- this also pertains
@@ -211,13 +211,13 @@ o  Enable Arabic settings [short-cut]
 >
 		:set delcombine
 <
-      in our VIM window.  You can also append the 'delcombine' set command
+      in our Vim window.  You can also append the 'delcombine' set command
       to your .vimrc file.  In other words, you can include ':set delcombine'
       to your .vimrc file.
 
    +  Arabic right-to-left Mode
 
-      By default VIM starts in Left-to-right mode.  'rightleft' is the
+      By default Vim starts in Left-to-right mode.  'rightleft' is the
       command that allows one to alter a window's orientation - that can
       be accomplished via,
 
@@ -253,7 +253,7 @@ o  Enable Arabic settings [short-cut]
 >
 		:set arabicshape
 <
-      in our VIM window.  You can also append the 'arabicshape' set
+      in our Vim window.  You can also append the 'arabicshape' set
       command to your .vimrc file.  In other words, you can include
       ':set arabicshape' to your .vimrc file.
 
@@ -261,7 +261,7 @@ o  Enable Arabic settings [short-cut]
 Keymap/Keyboard						*arabickeymap*
 ---------------
 
-The character/letter encoding used in VIM is the standard UTF-8.
+The character/letter encoding used in Vim is the standard UTF-8.
 It is widely discouraged that any other encoding be used or even
 attempted.
 
@@ -294,7 +294,7 @@ o  Keyboard
 Restrictions
 ------------
 
-o  VIM in its GUI form does not currently support Bi-directionality
+o  Vim in its GUI form does not currently support Bi-directionality
    (i.e. the ability to see both Arabic and Latin intermixed within
    the same line).
 

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.0.  Last change: 2017 Jan 14
+*autocmd.txt*   For Vim version 8.0.  Last change: 2017 Apr 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -610,7 +610,7 @@ FileChangedShell		When Vim notices that the modification time of
 				|timestamp|
 				Mostly triggered after executing a shell
 				command, but also with a |:checktime| command
-				or when Gvim regains input focus.
+				or when gvim regains input focus.
 				This autocommand is triggered for each changed
 				file.  It is not used when 'autoread' is set
 				and the buffer was not changed.  If a
@@ -621,7 +621,7 @@ FileChangedShell		When Vim notices that the modification time of
 				to tell Vim what to do next.
 				NOTE: When this autocommand is executed, the
 				current buffer "%" may be different from the
-				buffer that was changed "<afile>".
+				buffer that was changed, which is in "<afile>".
 				NOTE: The commands must not change the current
 				buffer, jump to another buffer or delete a
 				buffer.  *E246* *E811*

runtime/doc/channel.txt

@@ -1,4 +1,4 @@
-*channel.txt*      For Vim version 8.0.  Last change: 2016 Dec 02
+*channel.txt*      For Vim version 8.0.  Last change: 2017 Jun 11
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -489,6 +489,11 @@ If you want to handle both stderr and stdout with one handler use the
 "callback" option: >
     let job = job_start(command, {"callback": "MyHandler"}) 
 
+Depending on the system, starting a job can put Vim in the background, the
+started job gets the focus.  To avoid that, use the `foreground()` function.
+This might not always work when called early, put in the callback handler or
+use a timer to call it after the job has started.
+
 You can send a message to the command with ch_evalraw().  If the channel is in
 JSON or JS mode you can use ch_evalexpr().
 

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.0.  Last change: 2016 Nov 24
+*editing.txt*   For Vim version 8.0.  Last change: 2017 Apr 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -276,7 +276,7 @@ If you want to keep the changed buffer without saving it, switch on the
 
 							*:vie* *:view*
 :vie[w][!] [++opt] [+cmd] file
-			When used in Ex mode: Leave |Ex mode|, go back to
+			When used in Ex mode: Leave |Ex-mode|, go back to
 			Normal mode.  Otherwise same as |:edit|, but set
 			'readonly' option for this buffer.  {not in Vi}
 
@@ -1558,6 +1558,13 @@ If you want to automatically reload a file when it has been changed outside of
 Vim, set the 'autoread' option.  This doesn't work at the moment you write the
 file though, only when the file wasn't changed inside of Vim.
 
+If you do not want to be asked or automatically reload the file, you can use
+this: >
+	set buftype=nofile
+
+Or, when starting gvim from a shell: >
+	gvim file.log -c "set buftype=nofile"
+
 Note that if a FileChangedShell autocommand is defined you will not get a
 warning message or prompt.  The autocommand is expected to handle this.
 

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 8.0.  Last change: 2017 Jan 04
+*filetype.txt*  For Vim version 8.0.  Last change: 2017 Mar 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -353,12 +353,12 @@ define yourself.  There are a few ways to avoid this:
    You need to define your own mapping before the plugin is loaded (before
    editing a file of that type).  The plugin will then skip installing the
    default mapping.
-
+						*no_mail_maps*
 3. Disable defining mappings for a specific filetype by setting a variable,
    which contains the name of the filetype.  For the "mail" filetype this
    would be: >
 	:let no_mail_maps = 1
-
+<						*no_plugin_maps*
 4. Disable defining mappings for all filetypes by setting a variable: >
 	:let no_plugin_maps = 1
 <
@@ -663,6 +663,12 @@ Since the text for this plugin is rather long it has been put in a separate
 file: |pi_spec.txt|.
 
 
+RUST							*ft-rust*
+
+Since the text for this plugin is rather long it has been put in a separate
+file: |ft_rust.txt|.
+
+
 SQL							*ft-sql*
 
 Since the text for this plugin is rather long it has been put in a separate

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 8.0.  Last change: 2016 Jan 02
+*fold.txt*      For Vim version 8.0.  Last change: 2017 Mar 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -64,7 +64,7 @@ whichever is lower.  These are empty or white lines and lines starting
 with a character in 'foldignore'.  White space is skipped before checking for
 characters in 'foldignore'.  For C use "#" to ignore preprocessor lines.
 
-When you want to ignore lines in another way, use the 'expr' method.  The
+When you want to ignore lines in another way, use the "expr" method.  The
 |indent()| function can be used in 'foldexpr' to get the indent of a line.
 
 
@@ -79,7 +79,7 @@ This will call a function to compute the fold level: >
 	:set foldexpr=MyFoldLevel(v:lnum)
 This will make a fold out of paragraphs separated by blank lines: >
 	:set foldexpr=getline(v:lnum)=~'^\\s*$'&&getline(v:lnum+1)=~'\\S'?'<1':1
-this does the same: >
+This does the same: >
 	:set foldexpr=getline(v:lnum-1)=~'^\\s*$'&&getline(v:lnum)=~'\\S'?'>1':1
 
 Note that backslashes must be used to escape characters that ":set" handles
@@ -139,7 +139,7 @@ fold level.  But note that foldlevel() may return -1 if the level is not known
 yet.  And it returns the level at the start of the line, while a fold might
 end in that line.
 
-It may happened that folds are not updated properly.  You can use |zx| or |zX|
+It may happen that folds are not updated properly.  You can use |zx| or |zX|
 to force updating folds.
 
 
@@ -203,7 +203,7 @@ and the level given by the marker:
 1. If a marker with the same fold level is encountered, the previous fold
    ends and another fold with the same level starts.
 2. If a marker with a higher fold level is found, a nested fold is started.
-3. if a marker with a lower fold level is found, all folds up to and including
+3. If a marker with a lower fold level is found, all folds up to and including
    this level end and a fold with the specified level starts.
 
 The number indicates the fold level.  A zero cannot be used (a marker with

runtime/doc/ft_ada.txt

@@ -116,7 +116,7 @@ NOTE: "gnat xref -v" is very tricky to use as it has almost no diagnostic
     then "gnat xref -v *.ad?"
 4)  Project manager support is completely broken - don't even try "gnat xref
     -Padacl.gpr".
-5)  VIM is faster when the tags file is sorted - use "sort --unique
+5)  Vim is faster when the tags file is sorted - use "sort --unique
     --ignore-case --output=tags tags" .
 6)  Remember to insert "!_TAG_FILE_SORTED 2 %sort ui" as first line to mark
     the file assorted.

runtime/doc/ft_rust.txt

@@ -0,0 +1,237 @@
+*ft_rust.txt*      Filetype plugin for Rust
+
+==============================================================================
+CONTENTS                                                      *rust*
+
+1. Introduction                                                   |rust-intro|
+2. Settings                                                    |rust-settings|
+3. Commands                                                    |rust-commands|
+4. Mappings                                                    |rust-mappings|
+
+==============================================================================
+INTRODUCTION                                                      *rust-intro*
+
+This plugin provides syntax and supporting functionality for the Rust
+filetype.
+
+==============================================================================
+SETTINGS                                                       *rust-settings*
+
+This plugin has a few variables you can define in your vimrc that change the
+behavior of the plugin.
+
+                                                                *g:rustc_path*
+g:rustc_path~
+	Set this option to the path to rustc for use in the |:RustRun| and
+	|:RustExpand| commands. If unset, "rustc" will be located in $PATH: >
+	    let g:rustc_path = $HOME."/bin/rustc"
+<
+
+                                                  *g:rustc_makeprg_no_percent*
+g:rustc_makeprg_no_percent~
+	Set this option to 1 to have 'makeprg' default to "rustc" instead of
+	"rustc %": >
+	    let g:rustc_makeprg_no_percent = 1
+<
+
+                                                              *g:rust_conceal*
+g:rust_conceal~
+	Set this option to turn on the basic |conceal| support: >
+	    let g:rust_conceal = 1
+<
+
+                                                     *g:rust_conceal_mod_path*
+g:rust_conceal_mod_path~
+	Set this option to turn on |conceal| for the path connecting token
+	"::": >
+	    let g:rust_conceal_mod_path = 1
+<
+
+                                                          *g:rust_conceal_pub*
+g:rust_conceal_pub~
+	Set this option to turn on |conceal| for the "pub" token: >
+	    let g:rust_conceal_pub = 1
+<
+
+                                                     *g:rust_recommended_style*
+g:rust_recommended_style~
+        Set this option to enable vim indentation and textwidth settings to
+        conform to style conventions of the rust standard library (i.e. use 4
+        spaces for indents and sets 'textwidth' to 99). This option is enabled
+	by default. To disable it: >
+	    let g:rust_recommended_style = 0
+<
+
+                                                                 *g:rust_fold*
+g:rust_fold~
+	Set this option to turn on |folding|: >
+	    let g:rust_fold = 1
+<
+	Value		Effect ~
+	0		No folding
+	1		Braced blocks are folded. All folds are open by
+			default.
+	2		Braced blocks are folded. 'foldlevel' is left at the
+			global value (all folds are closed by default).
+
+                                                  *g:rust_bang_comment_leader*
+g:rust_bang_comment_leader~
+	Set this option to 1 to preserve the leader on multi-line doc comments
+	using the /*! syntax: >
+	    let g:rust_bang_comment_leader = 1
+<
+
+                                                 *g:ftplugin_rust_source_path*
+g:ftplugin_rust_source_path~
+	Set this option to a path that should be prepended to 'path' for Rust
+	source files: >
+	    let g:ftplugin_rust_source_path = $HOME.'/dev/rust'
+<
+
+                                                       *g:rustfmt_command*
+g:rustfmt_command~
+	Set this option to the name of the 'rustfmt' executable in your $PATH. If
+	not specified it defaults to 'rustfmt' : >
+	    let g:rustfmt_command = 'rustfmt'
+<
+                                                       *g:rustfmt_autosave*
+g:rustfmt_autosave~
+	Set this option to 1 to run |:RustFmt| automatically when saving a
+	buffer. If not specified it defaults to 0 : >
+	    let g:rustfmt_autosave = 0
+<
+                                                       *g:rustfmt_fail_silently*
+g:rustfmt_fail_silently~
+	Set this option to 1 to prevent 'rustfmt' from populating the
+	|location-list| with errors. If not specified it defaults to 0: >
+	    let g:rustfmt_fail_silently = 0
+<
+                                                       *g:rustfmt_options*
+g:rustfmt_options~
+	Set this option to a string of options to pass to 'rustfmt'. The
+	write-mode is already set to 'overwrite'. If not specified it
+	defaults to '' : >
+	    let g:rustfmt_options = ''
+<
+
+                                                          *g:rust_playpen_url*
+g:rust_playpen_url~
+	Set this option to override the url for the playpen to use: >
+	    let g:rust_playpen_url = 'https://play.rust-lang.org/'
+<
+
+                                                        *g:rust_shortener_url*
+g:rust_shortener_url~
+	Set this option to override the url for the url shortener: >
+	    let g:rust_shortener_url = 'https://is.gd/'
+<
+
+
+==============================================================================
+COMMANDS                                                       *rust-commands*
+
+:RustRun  [args]                                                    *:RustRun*
+:RustRun! [rustc-args] [--] [args]
+		Compiles and runs the current file. If it has unsaved changes,
+		it will be saved first using |:update|. If the current file is
+		an unnamed buffer, it will be written to a temporary file
+		first. The compiled binary is always placed in a temporary
+		directory, but is run from the current directory.
+
+		The arguments given to |:RustRun| will be passed to the
+		compiled binary.
+
+		If ! is specified, the arguments are passed to rustc instead.
+		A "--" argument will separate the rustc arguments from the
+		arguments passed to the binary.
+
+		If |g:rustc_path| is defined, it is used as the path to rustc.
+		Otherwise it is assumed rustc can be found in $PATH.
+
+:RustExpand  [args]                                              *:RustExpand*
+:RustExpand! [TYPE] [args]
+		Expands the current file using --pretty and displays the
+		results in a new split. If the current file has unsaved
+		changes, it will be saved first using |:update|. If the
+		current file is an unnamed buffer, it will be written to a
+		temporary file first.
+
+		The arguments given to |:RustExpand| will be passed to rustc.
+		This is largely intended for specifying various --cfg
+		configurations.
+
+		If ! is specified, the first argument is the expansion type to
+		pass to rustc --pretty. Otherwise it will default to
+		"expanded".
+
+		If |g:rustc_path| is defined, it is used as the path to rustc.
+		Otherwise it is assumed rustc can be found in $PATH.
+
+:RustEmitIr [args]                                               *:RustEmitIr*
+		Compiles the current file to LLVM IR and displays the results
+		in a new split. If the current file has unsaved changes, it
+		will be saved first using |:update|. If the current file is an
+		unnamed buffer, it will be written to a temporary file first.
+
+		The arguments given to |:RustEmitIr| will be passed to rustc.
+
+		If |g:rustc_path| is defined, it is used as the path to rustc.
+		Otherwise it is assumed rustc can be found in $PATH.
+
+:RustEmitAsm [args]                                             *:RustEmitAsm*
+		Compiles the current file to assembly and displays the results
+		in a new split. If the current file has unsaved changes, it
+		will be saved first using |:update|. If the current file is an
+		unnamed buffer, it will be written to a temporary file first.
+
+		The arguments given to |:RustEmitAsm| will be passed to rustc.
+
+		If |g:rustc_path| is defined, it is used as the path to rustc.
+		Otherwise it is assumed rustc can be found in $PATH.
+
+:RustPlay                                                          *:RustPlay*
+		This command will only work if you have web-api.vim installed
+		(available at https://github.com/mattn/webapi-vim).  It sends the
+		current selection, or if nothing is selected, the entirety of the
+		current buffer to the Rust playpen, and emits a message with the
+		shortened URL to the playpen.
+
+		|g:rust_playpen_url| is the base URL to the playpen, by default
+		"https://play.rust-lang.org/".
+
+		|g:rust_shortener_url| is the base url for the shorterner, by
+		default "https://is.gd/"
+
+:RustFmt                                                       *:RustFmt*
+		Runs |g:rustfmt_command| on the current buffer. If
+		|g:rustfmt_options| is set then those will be passed to the
+		executable.
+
+		If |g:rustfmt_fail_silently| is 0 (the default) then it
+		will populate the |location-list| with the errors from
+		|g:rustfmt_command|. If |g:rustfmt_fail_silently| is set to 1
+		then it will not populate the |location-list|.
+
+:RustFmtRange                                                  *:RustFmtRange*
+		Runs |g:rustfmt_command| with selected range. See
+		|:RustFmt| for any other information.
+
+==============================================================================
+MAPPINGS                                                       *rust-mappings*
+
+This plugin defines mappings for |[[| and |]]| to support hanging indents.
+
+It also has a few other mappings:
+
+							*rust_<D-r>*
+<D-r>			Executes |:RustRun| with no arguments.
+			Note: This binding is only available in MacVim.
+
+							*rust_<D-R>*
+<D-R>			Populates the command line with |:RustRun|! using the
+			arguments given to the last invocation, but does not
+			execute it.
+			Note: This binding is only available in MacVim.
+
+==============================================================================
+ vim:tw=78:sw=4:noet:ts=8:ft=help:norl:

runtime/doc/hangulin.txt

@@ -6,7 +6,7 @@
 
 Introduction					*hangul*
 ------------
-It is to input hangul, the Korean language, with VIM GUI version.
+It is to input hangul, the Korean language, with Vim GUI version.
 If you have a XIM program, you can use another |+xim| feature.
 Basically, it is for anybody who has no XIM program.
 
@@ -31,7 +31,7 @@ You should set LANG variable to Korean locale such as ko, ko_KR.eucKR
 or ko_KR.UTF-8.
 If you set LC_ALL variable, it should be set to Korean locale also.
 
-VIM resource
+Vim resource
 ------------
 You may want to set 'encoding' and 'fileencodings'.
 Next are examples: >
@@ -53,12 +53,12 @@ If both are set, VIM_KEYBOARD has higher priority.
 
 Hangul Fonts
 ------------
-If you use GTK version of GVIM, you should set 'guifont' and 'guifontwide'.
+If you use GTK version of gvim, you should set 'guifont' and 'guifontwide'.
 For example: >
     set guifont=Courier\ 12
     set guifontwide=NanumGothicCoding\ 12
 
-If you use Motif or Athena version of GVIM, you should set 'guifontset' in
+If you use Motif or Athena version of gvim, you should set 'guifontset' in
 your vimrc.  You can set fontset in the .Xdefaults file.
 
 $HOME/.gvimrc: >
@@ -77,12 +77,12 @@ $HOME/.Xdefaults: >
 
 attention! the , (comma) or ; (semicolon)
 
-And there should be no ':set guifont'.  If it exists, then Gvim ignores
-':set guifontset'.  It means VIM runs without fontset supporting.
+And there should be no ':set guifont'.  If it exists, then gvim ignores
+':set guifontset'.  It means Vim runs without fontset supporting.
 So, you can see only English.  Hangul does not be correctly displayed.
 
-After 'fontset' feature is enabled, VIM does not allow using english
-font only in 'font' setting for syntax.
+After "fontset" feature is enabled, Vim does not allow using english
+font only in "font" setting for syntax.
 For example, if you use >
    :set guifontset=eng_font,your_font
 in your .gvimrc, then you should do for syntax >
@@ -99,7 +99,7 @@ We don't support Johab font.
 We don't support Hanja input.
 And We don't have any plan to support them.
 
-If you really need such features, you can use console version of VIM with a
+If you really need such features, you can use console version of Vim with a
 capable terminal emulator.
 
 Bug or Comment

runtime/doc/help.txt

@@ -31,7 +31,7 @@ Get specific help:  It is possible to go directly to whatever you want help
 		    help entries for "word".
 		    Or use ":helpgrep word". |:helpgrep|
 
-VIM stands for Vi IMproved.  Most of VIM was made by Bram Moolenaar, but only
+Vim stands for Vi IMproved.  Most of Vim was made by Bram Moolenaar, but only
 through the help of many others.  See |credits|.
 ------------------------------------------------------------------------------
 						*doc-file-list* *Q_ct*

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 8.0.  Last change: 2017 Feb 09
+*helphelp.txt*	For Vim version 8.0.  Last change: 2017 Mar 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -142,7 +142,8 @@ Help on help files					*helphelp*
 			already opened, then the location list for that window
 			is used.  Otherwise, a new help window is opened and
 			the location list for that window is set.  The
-			location list for the current window is not changed.
+			location list for the current window is not changed
+			then.
 
 							*:exu* *:exusage*
 :exu[sage]		Show help on Ex commands.  Added to simulate the Nvi
@@ -314,7 +315,7 @@ the applicable Vim version.  The last field specifies the last modification
 date of the file.  Each field is separated by a tab.
 
 At the bottom of the help file, place a Vim modeline to set the 'textwidth'
-and 'tabstop' options and the 'filetype' to 'help'.  Never set a global option
+and 'tabstop' options and the 'filetype' to "help".  Never set a global option
 in such a modeline, that can have consequences undesired by whoever reads that
 help.
 

runtime/doc/if_mzsch.txt

@@ -249,7 +249,7 @@ Windows							    *mzscheme-window*
 5. mzeval() Vim function				    *mzscheme-mzeval*
 
 To facilitate bi-directional interface, you can use |mzeval()| function to
-evaluate MzScheme expressions and pass their values to VimL.
+evaluate MzScheme expressions and pass their values to Vim script.
 
 ==============================================================================
 6. Using Function references				    *mzscheme-funcref*

runtime/doc/if_ole.txt

@@ -41,9 +41,9 @@ instance), code similar to the following should be used:
 	$vim = new Win32::OLE 'Vim.Application';
 
 [C#] >
-        // Add a reference to VIM in your project. 
+        // Add a reference to Vim in your project. 
         // Choose the COM tab.
-        // Select "VIM Ole Interface 1.1 Type Library"
+        // Select "Vim Ole Interface 1.1 Type Library"
 	Vim.Vim vimobj = new Vim.Vim();
 
 Vim does not support acting as a "hidden" OLE server, like some other OLE

runtime/doc/if_perl.txt

@@ -7,7 +7,7 @@
 Perl and Vim				*perl* *Perl*
 
 1. Editing Perl files			|perl-editing|
-2. Compiling VIM with Perl interface	|perl-compiling|
+2. Compiling Vim with Perl interface	|perl-compiling|
 3. Using the Perl interface		|perl-using|
 4. Dynamic loading			|perl-dynamic|
 
@@ -33,7 +33,7 @@ Vim in the $VIMRUNTIME/tools directory.  This script has currently more
 features than Exuberant ctags' Perl support.
 
 ==============================================================================
-2. Compiling VIM with Perl interface			*perl-compiling*
+2. Compiling Vim with Perl interface			*perl-compiling*
 
 To compile Vim with Perl interface, you need Perl 5.004 (or later).  Perl must
 be installed before you compile Vim.  Vim's Perl interface does NOT work with

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 8.0.  Last change: 2017 Feb 17
+*if_pyth.txt*   For Vim version 8.0.  Last change: 2017 Mar 09
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -17,6 +17,7 @@ The Python Interface to Vim				*python* *Python*
 9. Dynamic loading				|python-dynamic|
 10. Python 3					|python3|
 11. Python X					|python_x|
+12. Building with Python support		|python-building|
 
 {Vi does not have any of these commands}
 
@@ -174,8 +175,8 @@ vim.eval(str)						*python-eval*
 
 	    :py tagList = vim.eval('taglist("eval_expr")')
 <	The latter will return a python list of python dicts, for instance:
-	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name':
-	'eval_expr', 'kind': 'f', 'filename': './src/eval.c'}]
+	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name': ~
+	'eval_expr', 'kind': 'f', 'filename': './src/eval.c'}] ~
 
 vim.bindeval(str)					*python-bindeval*
 	Like |python-eval|, but returns special objects described in 
@@ -676,11 +677,11 @@ vim.Function object				*python-Function*
                      dictionary. Note that explicit `self` keyword used when 
                      calling resulting object overrides this attribute.
         auto_rebind  Boolean. True if partial created from this Python object 
-                     and stored in the VimL dictionary should be automatically 
-                     rebound to the dictionary it is stored in when this 
-                     dictionary is indexed. Exposes Vim internal difference 
-                     between `dict.func` (auto_rebind=True) and 
-                     `function(dict.func,dict)` (auto_rebind=False). This 
+                     and stored in the Vim script dictionary should be
+                     automatically rebound to the dictionary it is stored in
+                     when this dictionary is indexed. Exposes Vim internal
+                     difference between `dict.func` (auto_rebind=True) and
+                     `function(dict.func,dict)` (auto_rebind=False). This
                      attribute makes no sense if `self` attribute is `None`.
 
     Constructor additionally accepts `args`, `self` and `auto_rebind` 
@@ -711,7 +712,7 @@ vim.Function object				*python-Function*
 8. pyeval() and py3eval() Vim functions			*python-pyeval*
 
 To facilitate bi-directional interface, you can use |pyeval()| and |py3eval()| 
-functions to evaluate Python expressions and pass their values to VimL.
+functions to evaluate Python expressions and pass their values to Vim script.
 |pyxeval()| is also available.
 
 ==============================================================================
@@ -819,7 +820,7 @@ the other one from being available.
 11. Python X						*python_x* *pythonx*
 
 Because most python code can be written so that it works with python 2.6+ and
-python 3 the pyx* functions and commands have been writen.  They work exactly
+python 3 the pyx* functions and commands have been written.  They work exactly
 the same as the Python 2 and 3 variants, but select the Python version using
 the 'pyxversion' setting.
 
@@ -867,7 +868,7 @@ When compiled with both |+python| and |+python3|, the test depends on the
 it is not available then Python 2.  If 'pyxversion' is 2 or 3, it tests only
 Python 2 or 3 respectively.
 
-Note that for has('pythonx') to work it may try to dynamically load Python 3
+Note that for `has('pythonx')` to work it may try to dynamically load Python 3
 or 2.  This may have side effects, especially when Vim can only load one of
 the two.
 
@@ -879,5 +880,27 @@ If a user prefers Python 2 and want to fallback to Python 3, he needs to set
 	  set pyx=3
 	endif
 
+==============================================================================
+12. Building with Python support			*python-building*
+
+A few hints for building with Python 2 or 3 support.
+
+UNIX
+
+See src/Makefile for how to enable including the Python interface.
+
+On Ubuntu you will want to install these packages for Python 2:
+	python
+	python-dev
+For Python 3:
+	python3
+	pytyon3-dev
+For Python 3.6:
+	python3.6
+	pytyon3.6-dev
+
+If you have more than one version of Python 3, you need to link python3 to the
+one you prefer, before running configure.
+
 ==============================================================================
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/if_ruby.txt

@@ -72,7 +72,7 @@ To see what version of Ruby you have: >
 
 							*:rubyfile* *:rubyf*
 :rubyf[ile] {file}	Execute the Ruby script in {file}.  This is the same as
-			":ruby load 'file'", but allows file name completion.
+			`:ruby load 'file'`, but allows file name completion.
 
 Executing Ruby commands is not possible in the |sandbox|.
 

runtime/doc/indent.txt

@@ -324,6 +324,21 @@ The examples below assume a 'shiftwidth' of 4.
 		  {                          {
 		      void function();       void function();
 		  }                          }
+<
+							*cino-E*
+	EN    Indent inside C++ linkage specifications (extern "C" or
+	      extern "C++") N characters extra compared to a normal block.
+	      (default 0).
+
+		cino=			   cino=E-s >
+		  extern "C" {               extern "C" {
+		      void function();       void function();
+		  }                          }
+
+		  extern "C"                 extern "C"
+		  {                          {
+		      void function();       void function();
+		  }                          }
 <
 							*cino-p*
 	pN    Parameter declarations for K&R-style function declarations will
@@ -554,7 +569,7 @@ The examples below assume a 'shiftwidth' of 4.
 
 
 The defaults, spelled out in full, are:
-	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,N0,ps,ts,is,+s,
+	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,N0,E0,ps,ts,is,+s,
 			c3,C0,/0,(2s,us,U0,w0,W0,k0,m0,j0,J0,)20,*70,#0
 
 Vim puts a line in column 1 if:

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 8.0.  Last change: 2016 Sep 27
+*index.txt*     For Vim version 8.0.  Last change: 2017 Apr 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -309,10 +309,10 @@ tag		char	      note action in Normal mode	~
 |B|		B		1  cursor N WORDS backward
 |C|		["x]C		2  change from the cursor position to the end
 				   of the line, and N-1 more lines [into
-				   buffer x]; synonym for "c$"
+				   register x]; synonym for "c$"
 |D|		["x]D		2  delete the characters under the cursor
 				   until the end of the line and N-1 more
-				   lines [into buffer x]; synonym for "d$"
+				   lines [into register x]; synonym for "d$"
 |E|		E		1  cursor forward to the end of WORD N
 |F|		F{char}		1  cursor to the Nth occurrence of {char} to
 				   the left
@@ -329,13 +329,13 @@ tag		char	      note action in Normal mode	~
 				   opposite direction
 |O|		O		2  begin a new line above the cursor and
 				   insert text, repeat N times
-|P|		["x]P		2  put the text [from buffer x] before the
+|P|		["x]P		2  put the text [from register x] before the
 				   cursor N times
 |Q|		Q		   switch to "Ex" mode
 |R|		R		2  enter replace mode: overtype existing
 				   characters, repeat the entered text N-1
 				   times
-|S|		["x]S		2  delete N lines [into buffer x] and start
+|S|		["x]S		2  delete N lines [into register x] and start
 				   insert; synonym for "cc".
 |T|		T{char}		1  cursor till after Nth occurrence of {char}
 				   to the left
@@ -343,8 +343,8 @@ tag		char	      note action in Normal mode	~
 |V|		V		   start linewise Visual mode
 |W|		W		1  cursor N WORDS forward
 |X|		["x]X		2  delete N characters before the cursor [into
-				   buffer x]
-|Y|		["x]Y		   yank N lines [into buffer x]; synonym for
+				   register x]
+|Y|		["x]Y		   yank N lines [into register x]; synonym for
 				   "yy"
 |ZZ|		ZZ		   store current file if modified, and exit
 |ZQ|		ZQ		   exit current file always
@@ -367,12 +367,12 @@ tag		char	      note action in Normal mode	~
 |`}|		`}		1  cursor to the end of the current paragraph
 |a|		a		2  append text after the cursor N times
 |b|		b		1  cursor N words backward
-|c|		["x]c{motion}	2  delete Nmove text [into buffer x] and start
+|c|		["x]c{motion}	2  delete Nmove text [into register x] and
+				   start insert
+|cc|		["x]cc		2  delete N lines [into register x] and start
 				   insert
-|cc|		["x]cc		2  delete N lines [into buffer x] and start
-				   insert
-|d|		["x]d{motion}	2  delete Nmove text [into buffer x]
-|dd|		["x]dd		2  delete N lines [into buffer x]
+|d|		["x]d{motion}	2  delete Nmove text [into register x]
+|dd|		["x]dd		2  delete N lines [into register x]
 |do|		do		2  same as ":diffget"
 |dp|		dp		2  same as ":diffput"
 |e|		e		1  cursor forward to the end of word N
@@ -398,16 +398,16 @@ tag		char	      note action in Normal mode	~
 |q?|		q?		   edit ? command-line in command-line window
 |r|		r{char}		2  replace N chars with {char}
 |s|		["x]s		2  (substitute) delete N characters [into
-				   buffer x] and start insert
+				   register x] and start insert
 |t|		t{char}		1  cursor till before Nth occurrence of {char}
 				   to the right
 |u|		u		2  undo changes
 |v|		v		   start characterwise Visual mode
 |w|		w		1  cursor N words forward
 |x|		["x]x		2  delete N characters under and after the
-				   cursor [into buffer x]
-|y|		["x]y{motion}	   yank Nmove text [into buffer x]
-|yy|		["x]yy		   yank N lines [into buffer x]
+				   cursor [into register x]
+|y|		["x]y{motion}	   yank Nmove text [into register x]
+|yy|		["x]yy		   yank N lines [into register x]
 |z|		z{char}		   commands starting with 'z', see |z| below
 |{|		{		1  cursor N paragraphs backward
 |bar|		|		1  cursor to column N
@@ -1004,10 +1004,12 @@ tag		command	      action in Command-line editing mode	~
 |c_<CR>|	<CR>		execute entered command
 |c_CTRL-M|	CTRL-M		same as <CR>
 |c_CTRL-N|	CTRL-N		after using 'wildchar' with multiple matches:
-				go to next match, otherwise: same as <Down>
+				go to next match, otherwise: recall older
+				command-line from history.
 		CTRL-O		not used
 |c_CTRL-P|	CTRL-P		after using 'wildchar' with multiple matches:
-				go to previous match, otherwise: same as <Up>
+				go to previous match, otherwise: recall older
+				command-line from history.
 |c_CTRL-Q|	CTRL-Q		same as CTRL-V, unless it's used for terminal
 				control flow
 |c_CTRL-R|	CTRL-R {0-9a-z"%#*:= CTRL-F CTRL-P CTRL-W CTRL-A}

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.0.  Last change: 2016 Jan 31
+*insert.txt*    For Vim version 8.0.  Last change: 2017 May 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -159,7 +159,8 @@ CTRL-R CTRL-R {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-R*
 CTRL-R CTRL-O {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-O*
 		Insert the contents of a register literally and don't
 		auto-indent.  Does the same as pasting with the mouse
-		|<MiddleMouse>|.
+		|<MiddleMouse>|. When the register is linewise this will
+		insert the text above the current line, like with `P`.
 		Does not replace characters!
 		The '.' register (last inserted text) is still inserted as
 		typed.  {not in Vi}
@@ -633,13 +634,13 @@ Completion can be done for:
 10. User defined completion				|i_CTRL-X_CTRL-U|
 11. omni completion					|i_CTRL-X_CTRL-O|
 12. Spelling suggestions				|i_CTRL-X_s|
-13. keywords in 'complete'				|i_CTRL-N|
+13. keywords in 'complete'				|i_CTRL-N| |i_CTRL-P|
 
-All these (except 2) are done in CTRL-X mode.  This is a sub-mode of Insert
-and Replace modes.  You enter CTRL-X mode by typing CTRL-X and one of the
-CTRL-X commands.  You exit CTRL-X mode by typing a key that is not a valid
-CTRL-X mode command.  Valid keys are the CTRL-X command itself, CTRL-N (next),
-and CTRL-P (previous).
+All these, except CTRL-N and CTRL-P, are done in CTRL-X mode.  This is a
+sub-mode of Insert and Replace modes.  You enter CTRL-X mode by typing CTRL-X
+and one of the CTRL-X commands.  You exit CTRL-X mode by typing a key that is
+not a valid CTRL-X mode command.  Valid keys are the CTRL-X command itself,
+CTRL-N (next), and CTRL-P (previous).
 
 Also see the 'infercase' option if you want to adjust the case of the match.
 
@@ -1103,7 +1104,7 @@ items:
 	empty		when non-zero this match will be added even when it is
 			an empty string
 
-All of these except 'icase', 'dup' and 'empty' must be a string.  If an item
+All of these except "icase", "dup" and "empty" must be a string.  If an item
 does not meet these requirements then an error message is given and further
 items in the list are not used.  You can mix string and Dictionary items in
 the returned list.

runtime/doc/intro.txt

@@ -84,8 +84,8 @@ The Vim pages contain the most recent information about Vim.  They also
 contain links to the most recent version of Vim.  The FAQ is a list of
 Frequently Asked Questions.  Read this if you have problems.
 
-	VIM home page:	  http://www.vim.org/
-	VIM FAQ:	  http://vimdoc.sf.net/
+	Vim home page:	  http://www.vim.org/
+	Vim FAQ:	  http://vimdoc.sf.net/
 	Downloading:	  ftp://ftp.vim.org/pub/vim/MIRRORS
 
 

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.0.  Last change: 2016 Oct 15
+*map.txt*       For Vim version 8.0.  Last change: 2017 May 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -185,7 +185,7 @@ that starts with ",".  Then you need to type another character for Vim to know
 whether to use the "," mapping or the longer one.  To avoid this add the
 <nowait> argument.  Then the mapping will be used when it matches, Vim does
 not wait for more characters to be typed.  However, if the characters were
-already type they are used.
+already typed they are used.
 
 						*:map-<silent>* *:map-silent*
 To define a mapping which will not be echoed on the command line, add
@@ -584,7 +584,8 @@ Upper and lowercase differences are ignored.
 
 							*map-comments*
 It is not possible to put a comment after these commands, because the '"'
-character is considered to be part of the {lhs} or {rhs}.
+character is considered to be part of the {lhs} or {rhs}. However, one can
+use |", since this starts a new, empty command with a comment.
 
 							*map_bar* *map-bar*
 Since the '|' character is used to separate a map command from the next
@@ -797,7 +798,7 @@ Bear in mind that convert-meta has been reported to have troubles when used in
 UTF-8 locales.  On terminals like xterm, the "metaSendsEscape" resource can be
 toggled on the fly through the "Main Options" menu, by pressing Ctrl-LeftClick
 on the terminal; that's a good last resource in case you want to send ESC when
-using other applications but not when inside VIM.
+using other applications but not when inside Vim.
 
 
 1.11 MAPPING AN OPERATOR				*:map-operator*

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 8.0.  Last change: 2017 Jan 02
+*message.txt*   For Vim version 8.0.  Last change: 2017 Mar 25
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -768,6 +768,13 @@ Example: >
 You tried to execute a command that is neither an Ex command nor
 a user-defined command.
 
+							*E943*  >
+  Command table needs to be updated, run 'make cmdidxs'
+
+This can only happen when changing the source code, when adding a command in
+src/ex_cmds.h.  The lookup table then needs to be updated, by running: >
+	make cmdidxs
+
 ==============================================================================
 3. Messages						*messages*
 

runtime/doc/mlang.txt

@@ -1,4 +1,4 @@
-*mlang.txt*     For Vim version 8.0.  Last change: 2016 Jan 16
+*mlang.txt*     For Vim version 8.0.  Last change: 2017 Mar 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -179,6 +179,7 @@ Send an e-mail to the Vim maintainer <maintainer@vim.org>.
 			special characters like "&" and "<Tab>" need to be
 			included.  Spaces and dots need to be escaped with a
 			backslash, just like in other |:menu| commands.
+			Case in {english} is ignored.
 
 See the $VIMRUNTIME/lang directory for examples.
 

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.0.  Last change: 2016 Nov 24
+*motion.txt*    For Vim version 8.0.  Last change: 2017 Mar 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -193,7 +193,7 @@ l		or					*l*
 
 							*$* *<End>* *<kEnd>*
 $  or <End>		To the end of the line.  When a count is given also go
-			[count - 1] lines downward |inclusive|.
+			[count - 1] lines downward. |inclusive| motion.
 			In Visual mode the cursor goes to just after the last
 			character in the line.
 			When 'virtualedit' is active, "$" may move the cursor

runtime/doc/netbeans.txt

@@ -120,7 +120,7 @@ In case you do not want the NetBeans interface you can disable it by
 uncommenting a line with "--disable-netbeans" in the Makefile.
 
 Currently the NetBeans interface is supported by Vim running in a terminal and
-by GVim when it is run with one of the following GUIs: GTK, GNOME, Windows,
+by gvim when it is run with one of the following GUIs: GTK, GNOME, Windows,
 Athena and Motif.
 
 If Motif support is required the user must supply XPM libraries.  See
@@ -996,7 +996,7 @@ to "Vim".  In the Expert tab make sure the "Vim Command" is correct.
 You should be careful if you change the "Vim Command".  There are command
 line options there which must be there for the connection to be properly
 set up.  You can change the command name but that's about it.  If your gvim
-can be found by your $PATH then the VIM Command can start with "gvim".  If
+can be found by your $PATH then the Vim Command can start with "gvim".  If
 you don't want gvim searched from your $PATH then hard code in the full
 Unix path name.  At this point you should get a gvim for any source file
 you open in NetBeans.

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.0.  Last change: 2017 Feb 09
+*options.txt*	For Vim version 8.0.  Last change: 2017 Jun 18
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -370,7 +370,7 @@ Note: In the future more global options can be made global-local.  Using
 
 Setting the filetype
 
-:setf[iletype] {filetype}			*:setf* *:setfiletype*
+:setf[iletype] [FALLBACK] {filetype}			*:setf* *:setfiletype*
 			Set the 'filetype' option to {filetype}, but only if
 			not done yet in a sequence of (nested) autocommands.
 			This is short for: >
@@ -380,6 +380,13 @@ Setting the filetype
 <			This command is used in a filetype.vim file to avoid
 			setting the 'filetype' option twice, causing different
 			settings and syntax files to be loaded.
+
+			When the optional FALLBACK argument is present, a
+			later :setfiletype command will override the
+			'filetype'.  This is to used for filetype detections
+			that are just a guess.  |did_filetype()| will return
+			false after this command.
+
 			{not in Vi}
 
 				*option-window* *optwin*
@@ -727,6 +734,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	which can be easier to read at certain sizes on certain displays.
 	Setting this option can sometimes cause problems if 'guifont' is set
 	to its default (empty string).
+	NOTE: This option is reset when 'compatible' is set.
 
 			*'autochdir'* *'acd'* *'noautochdir'* *'noacd'*
 'autochdir' 'acd'	boolean (default off)
@@ -760,6 +768,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	- Disable the use of 'keymap' (without changing its value).
 	Note that 'arabicshape' and 'delcombine' are not reset (it is a global
 	option).
+	NOTE: This option is reset when 'compatible' is set.
 	Also see |arabic.txt|.
 
 					*'arabicshape'* *'arshape'*
@@ -781,6 +790,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	form.
 	Arabic is a complex language which requires other settings, for
 	further details see |arabic.txt|.
+	NOTE: This option is set when 'compatible' is set.
 
 			*'autoindent'* *'ai'* *'noautoindent'* *'noai'*
 'autoindent' 'ai'	boolean	(default off)
@@ -859,6 +869,12 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	Vim will guess the value.  In the GUI this should work correctly,
 	in other cases Vim might not be able to guess the right value.
 
+	When the t_BG option is set, Vim will use it to request the background
+	color from the terminal.  If the returned RGB value is dark/light and
+	'background' is not dark/light, 'background' will be set and the
+	screen is redrawn.  This may have side effects, make t_BG empty in
+	your .vimrc if you suspect this problem.
+
 	When starting the GUI, the default value for 'background' will be
 	"light".  When the value is not set in the .gvimrc, and Vim detects
 	that the background is actually quite dark, 'background' is set to
@@ -993,6 +1009,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	the system may refuse to do this.  In that case the "auto" value will
 	again not rename the file.
 
+	NOTE: This option is set to the Vi default value when 'compatible' is
+	set and to the Vim default value when 'compatible' is reset.
+
 						*'backupdir'* *'bdir'*
 'backupdir' 'bdir'	string	(default for Amiga: ".,t:",
 				 for MS-DOS and Win32: ".,$TEMP,c:/tmp,c:/temp"
@@ -1120,6 +1139,9 @@ A jump table for the options with a short description can be found at |Q_op|.
     set bexpr=MyBalloonExpr()
     set ballooneval
 <
+	Also see |balloon_show()|, can be used if the content of the balloon
+	is to be fetched asynchronously.
+
 	NOTE: The balloon is displayed only if the cursor is on a text
 	character.  If the result of evaluating 'balloonexpr' is not empty,
 	Vim does not try to send a message to an external debugger (Netbeans
@@ -1136,6 +1158,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	When they are supported "\n" characters will start a new line.  If the
 	expression evaluates to a |List| this is equal to using each List item
 	as a string and putting "\n" in between them.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 						*'belloff'* *'bo'*
 'belloff' 'bo'		string	(default "")
@@ -1173,8 +1196,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	wildmode    More matches in |cmdline-completion| available
 		    (depends on the 'wildmode' setting).
 
-	This is most useful, to fine tune when in insert mode the bell should
-	be rung. For normal mode and ex commands, the bell is often rung to
+	This is most useful to fine tune when in Insert mode the bell should
+	be rung. For Normal mode and Ex commands, the bell is often rung to
 	indicate that an error occurred. It can be silenced by adding the
 	"error" keyword.
 
@@ -1256,6 +1279,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Every wrapped line will continue visually indented (same amount of
 	space as the beginning of that line), thus preserving horizontal blocks
 	of text.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'breakindentopt'* *'briopt'*
 'breakindentopt' 'briopt' string (default empty)
@@ -1432,6 +1456,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 		:exe "set cedit=\<Esc>"
 <	|Nvi| also has this option, but it only uses the first character.
 	See |cmdwin|.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 				*'charconvert'* *'ccv'* *E202* *E214* *E513*
 'charconvert' 'ccv'	string (default "")
@@ -1702,12 +1728,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	This option has the effect of making Vim either more Vi-compatible, or
 	make Vim behave in a more useful way.
+
 	This is a special kind of option, because when it's set or reset,
-	other options are also changed as a side effect.  CAREFUL: Setting or
-	resetting this option can have a lot of unexpected effects: Mappings
-	are interpreted in another way, undo behaves differently, etc.  If you
-	set this option in your vimrc file, you should probably put it at the
-	very start.
+	other options are also changed as a side effect.
+	NOTE: Setting or resetting this option can have a lot of unexpected
+	effects: Mappings are interpreted in another way, undo behaves
+	differently, etc.  If you set this option in your vimrc file, you
+	should probably put it at the very start.
+
 	By default this option is on and the Vi defaults are used for the
 	options.  This default was chosen for those people who want to use Vim
 	just like Vi, and don't even (want to) know about the 'compatible'
@@ -1722,70 +1750,98 @@ A jump table for the options with a short description can be found at |Q_op|.
 	|posix-compliance|.
 	You can also set this option with the "-C" argument, and reset it with
 	"-N".  See |-C| and |-N|.
-	Switching this option off makes the Vim defaults be used for options
-	that have a different Vi and Vim default value.  See the options
-	marked with a '+' below.  Other options are not modified.
-	At the moment this option is set, several other options will be set
-	or reset to make Vim as Vi-compatible as possible.  See the table
-	below.  This can be used if you want to revert to Vi compatible
-	editing.
-	See also 'cpoptions'.
+	See 'cpoptions' for more fine tuning of Vi compatibility.
 
-	option		+ set value	effect	~
+	When this option is set, numerous other options are set to make Vim as
+	Vi-compatible as possible.  When this option is unset, various options
+	are set to make Vim more useful.  The table below lists all the
+	options affected.
+	The {?} column indicates when the options are affected:
+	+  Means that the option is set to the value given in {set value} when
+	   'compatible' is set.
+	&  Means that the option is set to the value given in {set value} when
+	   'compatible' is set AND is set to its Vim default value when
+	   'compatible' is unset.
+	-  Means the option is NOT changed when setting 'compatible' but IS
+	   set to its Vim default when 'compatible' is unset.
+	The {effect} column summarises the change when 'compatible' is set.
 
-	'allowrevins'	  off		no CTRL-_ command
-	'backspace'	  ""		normal backspace
-	'backupcopy'	  Unix: "yes"	backup file is a copy
-			  else: "auto"  copy or rename backup file
-	'backup'	  off		no backup file
-	'cedit'		+ ""		no key to open the |cmdwin|
-	'cindent'	  off		no C code indentation
-	'cpoptions'	+ (all flags)	Vi-compatible flags
-	'cscopetag'	  off		don't use cscope for ":tag"
-	'cscopetagorder'  0		see |cscopetagorder|
-	'cscopeverbose'	  off		see |cscopeverbose|
-	'digraph'	  off		no digraphs
-	'esckeys'	+ off		no <Esc>-keys in Insert mode
-	'expandtab'	  off		tabs not expanded to spaces
-	'fileformats'	+ ""		no automatic file format detection,
+	option		? set value	effect ~
+
+	'allowrevins'	+ off		no CTRL-_ command
+	'antialias'	+ off		don't use antialiased fonts
+	'arabic'	+ off	 	reset arabic-related options
+	'arabicshape'	+ on		correct character shapes
+	'backspace'	+ ""		normal backspace
+	'backup'	+ off		no backup file
+	'backupcopy'	& Unix: "yes"	backup file is a copy
+			  else: "auto"	copy or rename backup file
+	'balloonexpr'	+ ""		text to show in evaluation balloon
+	'breakindent'	+ off		don't indent when wrapping lines
+	'cedit'		- {unchanged}	{set vim default only on resetting 'cp'}
+	'cindent'	+ off		no C code indentation
+	'compatible'	- {unchanged}	{set vim default only on resetting 'cp'}
+	'copyindent'	+ off		don't copy indent structure
+	'cpoptions'	& (all flags)	Vi-compatible flags
+	'cscopepathcomp'+ 0		don't show directories in tags list
+	'cscoperelative'+ off		
+	'cscopetag'	+ off		don't use cscope for ":tag"
+	'cscopetagorder'+ 0		see |cscopetagorder|
+	'cscopeverbose'	+ off		see |cscopeverbose|
+	'delcombine'	+ off		unicode: delete whole char combination
+	'digraph'	+ off		no digraphs
+	'esckeys'	& off		no <Esc>-keys in Insert mode
+	'expandtab'	+ off		tabs not expanded to spaces
+	'fileformats'	& ""		no automatic file format detection,
 			  "dos,unix"	except for DOS, Windows and OS/2
-	'formatoptions'	+ "vt"		Vi compatible formatting
-	'gdefault'	  off		no default 'g' flag for ":s"
-	'history'	+ 0		no commandline history
-	'hkmap'		  off		no Hebrew keyboard mapping
-	'hkmapp'	  off		no phonetic Hebrew keyboard mapping
-	'hlsearch'	  off		no highlighting of search matches
-	'incsearch'	  off		no incremental searching
-	'indentexpr'	  ""		no indenting by expression
-	'insertmode'	  off		do not start in Insert mode
-	'iskeyword'	+ "@,48-57,_"	keywords contain alphanumeric
+	'formatexpr'	+ ""		use 'formatprg' for auto-formatting
+	'formatoptions'	& "vt"		Vi compatible formatting
+	'gdefault'	+ off		no default 'g' flag for ":s"
+	'history'	& 0		no commandline history
+	'hkmap'		+ off		no Hebrew keyboard mapping
+	'hkmapp'	+ off		no phonetic Hebrew keyboard mapping
+	'hlsearch'	+ off		no highlighting of search matches
+	'incsearch'	+ off		no incremental searching
+	'indentexpr'	+ ""		no indenting by expression
+	'insertmode'	+ off		do not start in Insert mode
+	'iskeyword'	& "@,48-57,_"	keywords contain alphanumeric
 						characters and '_'
-	'joinspaces'	  on		insert 2 spaces after period
-	'modeline'	+ off		no modelines
-	'more'		+ off		no pauses in listings
-	'revins'	  off		no reverse insert
-	'ruler'		  off		no ruler
-	'scrolljump'	  1		no jump scroll
-	'scrolloff'	  0		no scroll offset
-	'shiftround'	  off		indent not rounded to shiftwidth
-	'shortmess'	+ ""		no shortening of messages
-	'showcmd'	+ off		command characters not shown
-	'showmode'	+ off		current mode not shown
-	'smartcase'	  off		no automatic ignore case switch
-	'smartindent'	  off		no smart indentation
-	'smarttab'	  off		no smart tab size
-	'softtabstop'	  0		tabs are always 'tabstop' positions
-	'startofline'	  on		goto startofline with some commands
-	'tagrelative'	+ off		tag file names are not relative
-	'textauto'	+ off		no automatic textmode detection
-	'textwidth'	  0		no automatic line wrap
-	'tildeop'	  off		tilde is not an operator
-	'ttimeout'	  off		no terminal timeout
-	'viminfo'       + {unchanged}	no viminfo file	
-	'whichwrap'	+ ""		left-right movements don't wrap
-	'wildchar'	+ CTRL-E	only when the current value is <Tab>
+	'joinspaces'	+ on		insert 2 spaces after period
+	'modeline'	& off		no modelines
+	'more'		& off		no pauses in listings
+	'mzquantum'	- {unchanged}	{set vim default only on resetting 'cp'}
+	'numberwidth'	& 8		min number of columns for line number
+	'preserveindent'+ off		don't preserve current indent structure
+						when changing it
+	'revins'	+ off		no reverse insert
+	'ruler'		+ off		no ruler
+	'scrolljump'	+ 1		no jump scroll
+	'scrolloff'	+ 0		no scroll offset
+	'shelltemp'	- {unchanged}	{set vim default only on resetting 'cp'}
+	'shiftround'	+ off		indent not rounded to shiftwidth
+	'shortmess'	& ""		no shortening of messages
+	'showcmd'	& off		command characters not shown
+	'showmode'	& off		current mode not shown
+	'sidescrolloff'	+ 0		cursor moves to edge of screen in scroll
+	'smartcase'	+ off		no automatic ignore case switch
+	'smartindent'	+ off		no smart indentation
+	'smarttab'	+ off		no smart tab size
+	'softtabstop'	+ 0		tabs are always 'tabstop' positions
+	'startofline'	+ on		goto startofline with some commands
+	'tagcase'	& "followic"	'ignorecase' when searching tags file
+	'tagrelative'	& off		tag file names are not relative
+	'termguicolors'	+ off		don't use highlight-(guifg|guibg)
+	'textauto'	& off		no automatic textmode detection
+	'textwidth'	+ 0		no automatic line wrap
+	'tildeop'	+ off		tilde is not an operator
+	'ttimeout'	+ off		no terminal timeout
+	'undofile'	+ off		don't use an undo file
+	'viminfo'       - {unchanged}	{set Vim default only on resetting 'cp'}
+	'virtualedit'	+ ""		cursor can only be placed on characters
+	'whichwrap'	& ""		left-right movements don't wrap
+	'wildchar'	& CTRL-E	only when the current value is <Tab>
 					use CTRL-E for cmdline completion
-	'writebackup'	  on or off	depends on the |+writebackup| feature
+	'writebackup'	+ on or off	depends on the |+writebackup| feature
 
 						*'complete'* *'cpt'* *E535*
 'complete' 'cpt'	string	(default: ".,w,b,u,t,i")
@@ -1960,7 +2016,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	existing line.  'expandtab' has no effect on these characters, a Tab
 	remains a Tab.  If the new indent is greater than on the existing
 	line, the remaining space is filled in the normal manner.
-	NOTE: 'copyindent' is reset when 'compatible' is set.
+	NOTE: This option is reset when 'compatible' is set.
 	Also see 'preserveindent'.
 
 						*'cpoptions'* *'cpo'* *cpo*
@@ -2321,6 +2377,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	Determines how many components of the path to show in a list of tags.
 	See |cscopepathcomp|.
+	NOTE: This option is set to 0 when 'compatible' is set.
 
 						*'cscopeprg'* *'csprg'*
 'cscopeprg' 'csprg'	string	(default "cscope")
@@ -2350,6 +2407,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	In the absence of a prefix (-P) for cscope. setting this option enables
 	to use the basename of cscope.out path as the prefix.
 	See |cscoperelative|.
+	NOTE: This option is reset when 'compatible' is set.
 
 				*'cscopetag'* *'cst'* *'nocscopetag'* *'nocst'*
 'cscopetag' 'cst'	boolean (default off)
@@ -2469,6 +2527,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This is useful for Arabic, Hebrew and many other languages where one
 	may have combining characters overtop of base characters, and want
 	to remove only the combining ones.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'dictionary'* *'dict'*
 'dictionary' 'dict'	string	(default "")
@@ -2654,7 +2713,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Makes the 'g' and 'c' flags of the ":substitute" command to be
 	toggled each time the flag is given.  See |complex-change|.  See
 	also 'gdefault' option.
-	Switching this option on is discouraged!
+	Switching this option on may break plugins!
 
 					*'emoji'* *'emo'* *'noemoji'* *'noemo'*
 'emoji' 'emo'	boolean (default: on)
@@ -2883,6 +2942,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	done when writing the file.  For reading see below.
 	When 'fileencoding' is empty, the same value as 'encoding' will be
 	used (no conversion when reading or writing a file).
+	No error will be given when the value is set, only when it is used,
+	only when writing a file.
 	Conversion will also be done when 'encoding' and 'fileencoding' are
 	both a Unicode encoding and 'fileencoding' is not utf-8.  That's
 	because internally Unicode is always stored as utf-8.
@@ -3387,6 +3448,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.  That stops the option from working,
 	since changing the buffer text is not allowed.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 					*'formatoptions'* *'fo'*
 'formatoptions' 'fo'	string (Vim default: "tcq", Vi default: "vt")
@@ -3460,6 +3522,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 		:s///gg		  subst. all	  subst. one
 
 	NOTE: This option is reset when 'compatible' is set.
+	DEPRECATED: Setting this option may break plugins that are not aware
+	of this option.  Also, many users get confused that adding the /g flag
+	has the opposite effect of that it normally does.
 
 						*'grepformat'* *'gfm'*
 'grepformat' 'gfm'	string	(default "%f:%l:%m,%f:%l%m,%f  %l%m")
@@ -3975,7 +4040,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 				     D:DiffDelete,T:DiffText,>:SignColumn,
 				     B:SpellBad,P:SpellCap,R:SpellRare,
 				     L:SpellLocal,-:Conceal,+:Pmenu,=:PmenuSel,
-				     x:PmenuSbar,X:PmenuThumb")
+				     x:PmenuSbar,X:PmenuThumb,*:TabLine,
+				     #:TabLineSel,_:TabLineFill,!:CursorColumn,
+				     .:CursorLine,o:ColorColumn,q:QuickFixLine")
 			global
 			{not in Vi}
 	This option can be used to set highlighting mode for various
@@ -4046,31 +4113,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 	define one.  The default uses a different group for each occasion.
 	See |highlight-default| for the default highlight groups.
 
-				 *'hlsearch'* *'hls'* *'nohlsearch'* *'nohls'*
-'hlsearch' 'hls'	boolean	(default off)
-			global
-			{not in Vi}
-			{not available when compiled without the
-			|+extra_search| feature}
-	When there is a previous search pattern, highlight all its matches.
-	The type of highlighting used can be set with the 'l' occasion in the
-	'highlight' option.  This uses the "Search" highlight group by
-	default.  Note that only the matching text is highlighted, any offsets
-	are not applied.
-	See also: 'incsearch' and |:match|.
-	When you get bored looking at the highlighted matches, you can turn it
-	off with |:nohlsearch|.  This does not change the option value, as
-	soon as you use a search command, the highlighting comes back.
-	'redrawtime' specifies the maximum time spent on finding matches.
-	When the search pattern can match an end-of-line, Vim will try to
-	highlight all of the matched text.  However, this depends on where the
-	search starts.  This will be the first line in the window or the first
-	line below a closed fold.  A match in a previous line which is not
-	drawn may not continue in a newly drawn line.
-	You can specify whether the highlight status is restored on startup
-	with the 'h' flag in 'viminfo' |viminfo-h|.
-	NOTE: This option is reset when 'compatible' is set.
-
 						*'history'* *'hi'*
 'history' 'hi'		number	(Vim default: 50, Vi default: 0,
 						 set to 200 in |defaults.vim|)
@@ -4103,6 +4145,31 @@ A jump table for the options with a short description can be found at |Q_op|.
 	When on, phonetic keyboard mapping is used.  'hkmap' must also be on.
 	This is useful if you have a non-Hebrew keyboard.
 	See |rileft.txt|.
+	NOTE: This option is reset when 'compatible' is set.
+
+				 *'hlsearch'* *'hls'* *'nohlsearch'* *'nohls'*
+'hlsearch' 'hls'	boolean	(default off)
+			global
+			{not in Vi}
+			{not available when compiled without the
+			|+extra_search| feature}
+	When there is a previous search pattern, highlight all its matches.
+	The type of highlighting used can be set with the 'l' occasion in the
+	'highlight' option.  This uses the "Search" highlight group by
+	default.  Note that only the matching text is highlighted, any offsets
+	are not applied.
+	See also: 'incsearch' and |:match|.
+	When you get bored looking at the highlighted matches, you can turn it
+	off with |:nohlsearch|.  This does not change the option value, as
+	soon as you use a search command, the highlighting comes back.
+	'redrawtime' specifies the maximum time spent on finding matches.
+	When the search pattern can match an end-of-line, Vim will try to
+	highlight all of the matched text.  However, this depends on where the
+	search starts.  This will be the first line in the window or the first
+	line below a closed fold.  A match in a previous line which is not
+	drawn may not continue in a newly drawn line.
+	You can specify whether the highlight status is restored on startup
+	with the 'h' flag in 'viminfo' |viminfo-h|.
 	NOTE: This option is reset when 'compatible' is set.
 
 						*'icon'* *'noicon'*
@@ -4384,7 +4451,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	Error messages will be suppressed, unless the 'debug' option contains
 	"msg".
 	See |indent-expression|.
-	NOTE: This option is made empty when 'compatible' is set.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.
@@ -4959,6 +5026,25 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
+					*'makeencoding'* *'menc'*
+'makeencoding' 'menc'	string	(default "")
+			global or local to buffer |global-local|
+			{only available when compiled with the |+multi_byte|
+			feature}
+			{not in Vi}
+	Encoding used for reading the output of external commands.  When empty,
+	encoding is not converted.
+	This is used for `:make`, `:lmake`, `:grep`, `:lgrep`, `:grepadd`,
+	`:lgrepadd`, `:cfile`, `:cgetfile`, `:caddfile`, `:lfile`, `:lgetfile`,
+	and `:laddfile`.
+
+	This would be mostly useful when you use MS-Windows and set 'encoding'
+	to "utf-8".  If |+iconv| is enabled and GNU libiconv is used, setting
+	'makeencoding' to "char" has the same effect as setting to the system
+	locale encoding.  Example: >
+		:set encoding=utf-8
+		:set makeencoding=char	" system locale is used
+<
 						*'makeprg'* *'mp'*
 'makeprg' 'mp'		string	(default "make", VMS: "MMS")
 			global or local to buffer |global-local|
@@ -5356,6 +5442,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			feature}
 	The number of milliseconds between polls for MzScheme threads.
 	Negative or zero value means no thread scheduling.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 							*'nrformats'* *'nf'*
 'nrformats' 'nf'	string	(default "bin,octal,hex",
@@ -5421,7 +5509,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	is set. Thus with the Vim default of 4 there is room for a line number
 	up to 999. When the buffer has 1000 lines five columns will be used.
 	The minimum value is 1, the maximum value is 10.
-	NOTE: 'numberwidth' is reset to 8 when 'compatible' is set.
+	NOTE: This option is set to the Vi default value when 'compatible' is
+	set and to the Vim default value when 'compatible' is reset.
 
 						*'omnifunc'* *'ofu'*
 'omnifunc' 'ofu'	string	(default: empty)
@@ -5661,7 +5750,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	a Tab.
 	NOTE: When using ">>" multiple times the resulting indent is a mix of
 	tabs and spaces.  You might not like this.
-	NOTE: 'preserveindent' is reset when 'compatible' is set.
+	NOTE: This option is reset when 'compatible' is set.
 	Also see 'copyindent'.
 	Use |:retab| to clean up white space.
 
@@ -5856,10 +5945,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{only available when compiled with the |+reltime|
 			feature}
 	The time in milliseconds for redrawing the display.  This applies to
-	searching for patterns for 'hlsearch' and |:match| highlighting.
+	searching for patterns for 'hlsearch', |:match| highlighting an syntax
+	highlighting.
 	When redrawing takes more than this many milliseconds no further
-	matches will be highlighted.  This is used to avoid that Vim hangs
-	when using a very complicated pattern.
+	matches will be highlighted.
+	For syntax highlighting the time applies per window.  When over the
+	limit syntax highlighting is disabled until |CTRL-L| is used.
+	This is used to avoid that Vim hangs when using a very complicated
+	pattern.
 
 						*'regexpengine'* *'re'*
 'regexpengine' 're'	number	(default 0)
@@ -6399,9 +6492,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 	"-f" is not inside the quotes, because it is not part of the command
 	name.  And Vim automagically recognizes the backslashes that are path
 	separators.
-	For Dos 32 bits (DJGPP), you can set the $DJSYSFLAGS environment
-	variable to change the way external commands are executed.  See the
-	libc.inf file of DJGPP.
 	Under MS-Windows, when the executable ends in ".com" it must be
 	included.  Thus setting the shell to "command.com" or "4dos.com"
 	works, but "command" and "4dos" do not work for all commands (e.g.,
@@ -6421,8 +6511,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Flag passed to the shell to execute "!" and ":!" commands; e.g.,
 	"bash.exe -c ls" or "command.com /c dir".  For the MS-DOS-like
 	systems, the default is set according to the value of 'shell', to
-	reduce the need to set this option by the user.  It's not used for
-	OS/2 (EMX figures this out itself).
+	reduce the need to set this option by the user.
 	On Unix it can have more than one flag.  Each white space separated
 	part is passed as an argument to the shell command.
 	See |option-backslash| about including spaces and backslashes.
@@ -6541,6 +6630,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'shelltemp' is off.
 	The `system()` function does not respect this option and always uses
 	temp files.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 						*'shelltype'* *'st'*
 'shelltype' 'st'	number	(default 0)
@@ -6857,7 +6948,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	mapping: ":inoremap # X^H#", where ^H is entered with CTRL-V CTRL-H.
 	When using the ">>" command, lines starting with '#' are not shifted
 	right.
-	NOTE: 'smartindent' is reset when 'compatible' is set.
+	NOTE: This option is reset when 'compatible' is set.
 	This option is reset when 'paste' is set and restored when 'paste' is
 	reset.
 
@@ -7045,7 +7136,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			word.  The expression must evaluate to a List of
 			Lists, each with a suggestion and a score.
 			Example:
-				[['the', 33], ['that', 44]]
+				[['the', 33], ['that', 44]] ~
 			Set 'verbose' and use |z=| to see the scores that the
 			internal methods use.  A lower score is better.
 			This may invoke |spellsuggest()| if you temporarily
@@ -7512,6 +7603,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   ignore	Ignore case
 	   match	Match case
 	   smart	Ignore case unless an upper case letter is used
+	NOTE: This option is set to the Vi default value when 'compatible' is
+	set and to the Vim default value when 'compatible' is reset.
 
 						*'taglength'* *'tl'*
 'taglength' 'tl'	number	(default 0)
@@ -7658,6 +7751,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	compatible terminal.
 	If setting this option does not work (produces a colorless UI)
 	reading |xterm-true-color| might help.
+	Note that the "cterm" attributes are still used, not the "gui" ones.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'terse'* *'noterse'*
 'terse'			boolean	(default off)
@@ -7733,7 +7828,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 'timeout' 'to'		boolean (default on)
 			global
 						*'ttimeout'* *'nottimeout'*
-'ttimeout'		boolean (default off, set in |defaults.vim|))
+'ttimeout'		boolean (default off, set in |defaults.vim|)
 			global
 			{not in Vi}
 	These two options together determine the behavior when part of a
@@ -7768,7 +7863,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global
 			{not in all versions of Vi}
 						*'ttimeoutlen'* *'ttm'*
-'ttimeoutlen' 'ttm'	number	(default -1, set to 100 in |defaults.vim|))
+'ttimeoutlen' 'ttm'	number	(default -1, set to 100 in |defaults.vim|)
 			global
 			{not in Vi}
 	The time in milliseconds that is waited for a key code or mapped key
@@ -8068,6 +8163,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The undo file is not read when 'undoreload' causes the buffer from
 	before a reload to be saved for undo.
 	When 'undofile' is turned off the undo file is NOT deleted.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'undolevels'* *'ul'*
 'undolevels' 'ul'	number	(default 100, 1000 for Unix, VMS,
@@ -8323,6 +8419,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 					    *'virtualedit'* *'ve'*
 'virtualedit' 've'	string	(default "")
@@ -8351,6 +8449,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The `g$` command will move to the end of the screen line.
 	It doesn't make sense to combine "all" with "onemore", but you will
 	not get a warning for it.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 			*'visualbell'* *'vb'* *'novisualbell'* *'novb'* *beep*
 'visualbell' 'vb'	boolean	(default off)

runtime/doc/os_beos.txt

@@ -144,7 +144,7 @@ The default value for $VIM is set at compile time and can be determined with >
   :version
 
 The normal value is /boot/home/config/share/vim.  If you don't like it you can
-set the VIM environment variable to override this, or set 'helpfile' in your
+set the Vim environment variable to override this, or set 'helpfile' in your
 .vimrc: >
 
   :if version >= 500

runtime/doc/os_mac.txt

@@ -1,4 +1,4 @@
-*os_mac.txt*    For Vim version 8.0.  Last change: 2006 Apr 30
+*os_mac.txt*    For Vim version 8.0.  Last change: 2017 Apr 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar et al.
@@ -12,11 +12,13 @@ NOTE: This file is a bit outdated.  You might find more useful info here:
 	http://macvim.org/
 
 1. Filename Convention		|mac-filename|
-2. .vimrc an .vim files		|mac-vimfile|
-3. FAQ				|mac-faq|
-4. Known Lack			|mac-lack|
-5. Mac Bug Report		|mac-bug|
-6. Compiling Vim		|mac-compile|
+2. .vimrc and .vim files	|mac-vimfile|
+3. Standard mappings		|mac-standard-mappings|
+4. FAQ				|mac-faq|
+5. Known Lack			|mac-lack|
+6. Mac Bug Report		|mac-bug|
+7. Compiling Vim		|mac-compile|
+8. The darwin feature		|mac-darwin-feature|
 
 There was a Mac port for version 3.0 of Vim.  Here are the first few lines
 from the old file:
@@ -72,7 +74,18 @@ the |'nocompatible'| option is set, otherwise it will only handle mac format
 files.
 
 ==============================================================================
-3. Mac FAQ						*mac-faq*
+3. Standard mappings				*mac-standard-mappings*
+
+The following mappings are available for cut/copy/paste from/to clipboard.
+
+key		Normal	Visual	  Insert	Description ~
+Command-v	"*P	"-d"*P    <C-R>*	paste text       *<D-v>*
+Command-c		"*y			copy Visual text *<D-c>*
+Command-x		"*d			cut Visual text  *<D-x>*
+Backspace		"*d			cut Visual text
+
+==============================================================================
+4. Mac FAQ						*mac-faq*
 
 On the internet:  http://macvim.org/OSX/index.php#FAQ
 
@@ -95,13 +108,13 @@ A: The following trick works with most shells.  Put it in your vimrc file.
 	let $PATH = matchstr(s:path, 'VIMPATH\zs.\{-}\ze\n')
 
 ==============================================================================
-4. Mac Lack						*mac-lack*
+5. Mac Lack						*mac-lack*
 
 In a terminal CTRL-^ needs to be entered as Shift-Control-6.  CTRL-@ as
 Shift-Control-2.
 
 ==============================================================================
-5. Mac Bug Report					*mac-bug*
+6. Mac Bug Report					*mac-bug*
 
 When reporting any Mac specific bug or feature change, please use the vim-mac
 maillist |vim-mac|.  However, you need to be subscribed.  An alternative is to
@@ -110,9 +123,59 @@ send a message to the current MacVim maintainers:
 	mac@vim.org
 
 ==============================================================================
-6. Compiling Vim					*mac-compile*
+7. Compiling Vim					*mac-compile*
 
 See the file "src/INSTALLmac.txt" that comes with the source files.
 
+==============================================================================
+8. The Darwin Feature					*mac-darwin-feature*
+
+If you have a Mac that isn't very old, you will be running OS X, also called
+Darwin.  The last pre-Darwin OS was Mac OS 9.  The darwin feature makes Vim
+use Darwin-specific properties.
+
+What is accomplished with this feature is two-fold:
+
+- Make Vim interoperable with the system clipboard.
+- Incorporate into Vim a converter module that bridges the gap between some
+  character encodings specific to the platform and those known to Vim.
+
+Needless to say, both are not to be missed for any decent text editor to work
+nicely with other applications running on the same desktop environment.
+
+As Vim is not an application dedicated only to macOS, we need an extra feature
+to add in order for it to offer the same user experience that our users on
+other platforms enjoy to people on macOS.
+
+For brevity, the feature is referred to as "darwin" to signify it one of the
+Vim features that are specific to that particular platform.
+
+The feature is a configuration option.  Accordingly, whether it is enabled or
+not is determined at build time; once it is selected to be enabled, it is
+compiled in and hence cannot be disabled at runtime.
+
+The feature is enabled by default.  For most macOS users, that should be
+sufficient unless they have specific needs mentioned briefly below.
+
+If you want to disable it, pass `--disable-darwin` to the configure script: >
+
+    ./configure --disable-darwin <other options>
+
+and then run `make` to build Vim.  The order of the options doesn't matter.
+
+To make sure at runtime whether or not the darwin feature is compiled in, you
+can use `has('macunix')` which returns 1 if the feature is compiled in; 0
+otherwise.
+
+Notable use cases where `--disable-darwin` is turned out to be useful are:
+
+- When you want to use |x11-selection| instead of the system clipboard.
+- When you want to use |x11-clientserver|.
+
+Since both have to make use of X11 inter-client communication for them to work
+properly, and since the communication mechanism can come into conflict with
+the system clipboard, the darwin feature should be disabled to prevent Vim
+from hanging at runtime.
+
 
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/os_vms.txt

@@ -539,7 +539,7 @@ More info under :help hardcopy
 
 8.10 Setting up the symbols
 
-When I use GVIM this way and press CTRL-Y in the parent terminal, gvim exits.
+When I use gvim this way and press CTRL-Y in the parent terminal, gvim exits.
 I now use a different symbol that seems to work OK and fixes the problem.
 I suggest this instead: >
 
@@ -547,7 +547,7 @@ I suggest this instead: >
 
 The /INPUT=NLA0: separates the standard input of the gvim process from the
 parent terminal, to block signals from the parent window.
-Without the -GEOMETRY, the GVIM window size will be minimal and the menu
+Without the -GEOMETRY, the gvim window size will be minimal and the menu
 will be confused after a window-resize.
 
 (Carlo Mekenkamp, Coen Engelbarts, Vim 6.0ac)
@@ -764,14 +764,14 @@ GNU_TOOLS.ZIP package downloadable from http://www.polarhome.com/vim/
 
 9. VMS related changes					*vms-changes*
 
-Version 7.4 
-- Undo: VMS can not handle more than one dot in the filenames use "dir/name" -> "dir/_un_name" 
+Version 7.4
+- Undo: VMS can not handle more than one dot in the filenames use "dir/name" -> "dir/_un_name"
   add _un_ at the beginning to keep the extension
 - correct swap file name wildcard handling
 - handle iconv usage correctly
 - do not optimize on vax - otherwise it hangs compiling crypto files
 - fileio.c fix the comment
-- correct RealWaitForChar 
+- correct RealWaitForChar
 - after 7.4-119 use different functions lib$cvtf_to_internal_time because Alpha and VAX have
   G_FLOAT but IA64 uses IEEE float otherwise Vim crashes
 - guard against crashes that are caused by mixed filenames

runtime/doc/os_win32.txt

@@ -1,4 +1,4 @@
-*os_win32.txt*  For Vim version 8.0.  Last change: 2016 Oct 12
+*os_win32.txt*  For Vim version 8.0.  Last change: 2017 Mar 21
 
 
 		  VIM REFERENCE MANUAL    by George Reilly
@@ -135,7 +135,7 @@ you will need to get a version older than that.
 6. Running under Windows 3.1				*win32-win3.1*
 
 					*win32s* *windows-3.1* *gui-w32s*
-There was a special version of Gvim that runs under Windows 3.1 and 3.11.
+There was a special version of gvim that runs under Windows 3.1 and 3.11.
 Support was removed in patch 7.4.1363.
 
 ==============================================================================
@@ -212,10 +212,19 @@ A. You can't!  This is a limitation of the NT console.  NT 5.0 is reported to
    be able to set the blink rate for all console windows at the same time.
 
 							*:!start*
-Q. How can I run an external command or program asynchronously?
-A. When using :! to run an external command, you can run it with "start": >
-	:!start winfile.exe<CR>
-<  Using "start" stops Vim switching to another screen, opening a new console,
+Q. How can I asynchronously run an external command or program, or open a
+   document or URL with its default program?
+A. When using :! to run an external command, you can run it with "start". For
+   example, to run notepad: >
+	:!start notepad
+<   To open "image.jpg" with the default image viewer: >
+        :!start image.jpg
+<   To open the folder of the current file in Windows Explorer: >
+        :!start %:h
+<   To open the Vim home page with the default browser: >
+        :!start http://www.vim.org/
+<
+   Using "start" stops Vim switching to another screen, opening a new console,
    or waiting for the program to complete; it indicates that you are running a
    program that does not affect the files you are editing.  Programs begun
    with :!start do not get passed Vim's open file handles, which means they do

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 8.0.  Last change: 2016 Sep 11
+*pattern.txt*   For Vim version 8.0.  Last change: 2017 Jun 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -869,10 +869,13 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%V	Match inside the Visual area.  When Visual mode has already been
 	stopped match in the area that |gv| would reselect.
 	This is a |/zero-width| match.  To make sure the whole pattern is
-	inside the Visual area put it at the start and end of the pattern,
-	e.g.: >
+	inside the Visual area put it at the start and just before the end of
+	the pattern, e.g.: >
+		/\%Vfoo.*ba\%Vr
+<	This also works if only "foo bar" was Visually selected. This: >
 		/\%Vfoo.*bar\%V
-<	Only works for the current buffer.
+<	would match "foo bar" if the Visual selection continues after the "r".
+	Only works for the current buffer.
 
 						*/\%#* *cursor-position*
 \%#	Matches with the cursor position.  Only works when matching in a
@@ -1073,34 +1076,40 @@ x	A single character, with no special meaning, matches itself
 	":s/[/x/" searches for "[/x" and replaces it with nothing.  It does
 	not search for "[" and replaces it with "x"!
 
+								*E944* *E945*
 	If the sequence begins with "^", it matches any single character NOT
 	in the collection: "[^xyz]" matches anything but 'x', 'y' and 'z'.
 	- If two characters in the sequence are separated by '-', this is
 	  shorthand for the full list of ASCII characters between them.  E.g.,
-	  "[0-9]" matches any decimal digit.  Non-ASCII characters can be
-	  used, but the character values must not be more than 256 apart.
+	  "[0-9]" matches any decimal digit. If the starting character exceeds
+	  the ending character, e.g. [c-a], E944 occurs. Non-ASCII characters
+	  can be used, but the character values must not be more than 256 apart
+	  in the old regexp engine. For example, searching by [\u3000-\u4000]
+	  after setting re=1 emits a E945 error. Prepending \%#=2 will fix it.
 	- A character class expression is evaluated to the set of characters
 	  belonging to that character class.  The following character classes
 	  are supported:
-			  Name		Contents ~
-*[:alnum:]*		  [:alnum:]     ASCII letters and digits
-*[:alpha:]*		  [:alpha:]     ASCII letters
-*[:blank:]*		  [:blank:]     space and tab characters
-*[:cntrl:]*		  [:cntrl:]     control characters
-*[:digit:]*		  [:digit:]     decimal digits
-*[:graph:]*		  [:graph:]     printable characters excluding space
-*[:lower:]*		  [:lower:]     lowercase letters (all letters when
+		  Name	      Func	Contents ~
+*[:alnum:]*	  [:alnum:]   isalnum	ASCII letters and digits
+*[:alpha:]*	  [:alpha:]   isalpha  	ASCII letters
+*[:blank:]*	  [:blank:]     	space and tab
+*[:cntrl:]*	  [:cntrl:]   iscntrl 	ASCII control characters
+*[:digit:]*	  [:digit:]     	decimal digits '0' to '9'
+*[:graph:]*	  [:graph:]   isgraph	ASCII printable characters excluding
+					space
+*[:lower:]*	  [:lower:]   (1)	lowercase letters (all letters when
 					'ignorecase' is used)
-*[:print:]*		  [:print:]     printable characters including space
-*[:punct:]*		  [:punct:]     ASCII punctuation characters
-*[:space:]*		  [:space:]     whitespace characters
-*[:upper:]*		  [:upper:]     uppercase letters (all letters when
+*[:print:]*	  [:print:]   (2) 	printable characters including space
+*[:punct:]*	  [:punct:]   ispunct	ASCII punctuation characters
+*[:space:]*	  [:space:]     	whitespace characters: space, tab, CR,
+					NL, vertical tab, form feed
+*[:upper:]*	  [:upper:]   (3)	uppercase letters (all letters when
 					'ignorecase' is used)
-*[:xdigit:]*		  [:xdigit:]    hexadecimal digits
-*[:return:]*		  [:return:]	the <CR> character
-*[:tab:]*		  [:tab:]	the <Tab> character
-*[:escape:]*		  [:escape:]	the <Esc> character
-*[:backspace:]*		  [:backspace:]	the <BS> character
+*[:xdigit:]*	  [:xdigit:]    	hexadecimal digits: 0-9, a-f, A-F
+*[:return:]*	  [:return:]		the <CR> character
+*[:tab:]*	  [:tab:]		the <Tab> character
+*[:escape:]*	  [:escape:]		the <Esc> character
+*[:backspace:]*	  [:backspace:]		the <BS> character
 	  The brackets in character class expressions are additional to the
 	  brackets delimiting a collection.  For example, the following is a
 	  plausible pattern for a UNIX filename: "[-./[:alnum:]_~]\+" That is,
@@ -1111,6 +1120,13 @@ x	A single character, with no special meaning, matches itself
 	  regexp engine.  See |two-engines|.  In the future these items may
 	  work for multi-byte characters.  For now, to get all "alpha"
 	  characters you can use: [[:lower:][:upper:]].
+
+	  The "Func" column shows what library function is used.  The
+	  implementation depends on the system.  Otherwise:
+	  (1) Uses islower() for ASCII and Vim builtin rules for other
+	  characters when built with the |+multi_byte| feature.
+	  (2) Uses Vim builtin rules
+	  (3) As with (1) but using isupper()
 							*/[[=* *[==]*
 	- An equivalence class.  This means that characters are matched that
 	  have almost the same meaning, e.g., when ignoring accents.  This

runtime/doc/pi_getscript.txt

@@ -9,7 +9,7 @@ Copyright: (c) 2004-2012 by Charles E. Campbell	*glvs-copyright*
 	The VIM LICENSE (see |copyright|) applies to the files in this
 	package, including getscriptPlugin.vim, getscript.vim,
 	GetLatestVimScripts.dist, and pi_getscript.txt, except use "getscript"
-	instead of "VIM".  Like anything else that's free, getscript and its
+	instead of "Vim".  Like anything else that's free, getscript and its
 	associated files are provided *as is* and comes with no warranty of
 	any kind, either expressed or implied.  No guarantees of
 	merchantability.  No guarantees of suitability for any purpose.  By
@@ -68,7 +68,7 @@ Your computer needs to have wget or curl for GetLatestVimScripts to do its work.
 		mv GetLatestVimScripts.dist GetLatestVimScripts.dat
 		(edit GetLatestVimScripts.dat to install your own personal
 		list of desired plugins -- see |GetLatestVimScripts_dat|)
-	
+
 	3. Windows:
 		vim getscript.vba
 		:so %

runtime/doc/print.txt

@@ -99,25 +99,25 @@ If the option is empty, then vim will use the system default printer for
 					HPUX: hp-roman8,
 					EBCDIC: ebcdic-uk)
 			global
-Sets the character encoding used when printing.  This option tells VIM which
+Sets the character encoding used when printing.  This option tells Vim which
 print character encoding file from the "print" directory in 'runtimepath' to
 use.
 
 This option will accept any value from |encoding-names|.  Any recognized names
-are converted to VIM standard names - see 'encoding' for more details.  Names
-not recognized by VIM will just be converted to lower case and underscores
+are converted to Vim standard names - see 'encoding' for more details.  Names
+not recognized by Vim will just be converted to lower case and underscores
 replaced with '-' signs.
 
-If 'printencoding' is empty or VIM cannot find the file then it will use
-'encoding' (if VIM is compiled with |+multi_byte| and it is set an 8-bit
-encoding) to find the print character encoding file.  If VIM is unable to find
+If 'printencoding' is empty or Vim cannot find the file then it will use
+'encoding' (if Vim is compiled with |+multi_byte| and it is set an 8-bit
+encoding) to find the print character encoding file.  If Vim is unable to find
 a character encoding file then it will use the "latin1" print character
 encoding file.
 
-When 'encoding' is set to a multi-byte encoding, VIM will try to convert
+When 'encoding' is set to a multi-byte encoding, Vim will try to convert
 characters to the printing encoding for printing (if 'printencoding' is empty
 then the conversion will be to latin1).  Conversion to a printing encoding
-other than latin1 will require VIM to be compiled with the |+iconv| feature.
+other than latin1 will require Vim to be compiled with the |+iconv| feature.
 If no conversion is possible then printing will fail.  Any characters that
 cannot be converted will be replaced with upside down question marks.
 
@@ -203,7 +203,7 @@ header is used when this option is empty.
 'printmbcharset' 'pmbcs'  string (default "")
 			  global
 Sets the CJK character set to be used when generating CJK output from
-|:hardcopy|.  The following predefined values are currently recognised by VIM:
+|:hardcopy|.  The following predefined values are currently recognised by Vim:
 
 		Value		Description ~
   Chinese	GB_2312-80
@@ -270,7 +270,7 @@ Japanese text you would do the following; >
 
 If 'printmbcharset' is not one of the above values then it is assumed to
 specify a custom multi-byte character set and no check will be made that it is
-compatible with the value for 'printencoding'.  VIM will look for a file
+compatible with the value for 'printencoding'.  Vim will look for a file
 defining the character set in the "print" directory in 'runtimepath'.
 
 							*pmbfn-option*
@@ -420,10 +420,10 @@ There are currently a number of limitations with PostScript printing:
   possible to get all the characters in an encoding to print by installing a
   new version of the Courier font family.
 
-- Multi-byte support - Currently VIM will try to convert multi-byte characters
+- Multi-byte support - Currently Vim will try to convert multi-byte characters
   to the 8-bit encoding specified by 'printencoding' (or latin1 if it is
   empty).  Any characters that are not successfully converted are shown as
-  unknown characters.  Printing will fail if VIM cannot convert the multi-byte
+  unknown characters.  Printing will fail if Vim cannot convert the multi-byte
   to the 8-bit encoding.
 
 ==============================================================================
@@ -434,11 +434,11 @@ you need to define your own PostScript font encoding vector.  Details on how
 to define a font encoding vector is beyond the scope of this help file, but
 you can find details in the PostScript Language Reference Manual, 3rd Edition,
 published by Addison-Wesley and available in PDF form at
-http://www.adobe.com/.  The following describes what you need to do for VIM to
+http://www.adobe.com/.  The following describes what you need to do for Vim to
 locate and use your print character encoding.
 
 i.   Decide on a unique name for your encoding vector, one that does not clash
-     with any of the recognized or standard encoding names that VIM uses (see
+     with any of the recognized or standard encoding names that Vim uses (see
      |encoding-names| for a list), and that no one else is likely to use.
 ii.  Copy $VIMRUNTIME/print/latin1.ps to the print subdirectory in your
      'runtimepath' and rename it with your unique name.
@@ -446,23 +446,23 @@ iii. Edit your renamed copy of latin1.ps, replacing all occurrences of latin1
      with your unique name (don't forget the line starting %%Title:), and
      modify the array of glyph names to define your new encoding vector.  The
      array must have exactly 256 entries or you will not be able to print!
-iv.  Within VIM, set 'printencoding' to your unique encoding name and then
-     print your file.  VIM will now use your custom print character encoding.
+iv.  Within Vim, set 'printencoding' to your unique encoding name and then
+     print your file.  Vim will now use your custom print character encoding.
 
-VIM will report an error with the resource file if you change the order or
+Vim will report an error with the resource file if you change the order or
 content of the first 3 lines, other than the name of the encoding on the line
 starting %%Title: or the version number on the line starting %%Version:.
 
-[Technical explanation for those that know PostScript - VIM looks for a file
+[Technical explanation for those that know PostScript - Vim looks for a file
 with the same name as the encoding it will use when printing.  The file
 defines a new PostScript Encoding resource called /VIM-name, where name is the
-print character encoding VIM will use.]
+print character encoding Vim will use.]
 
 ==============================================================================
 5. PostScript CJK Printing			*postscript-cjk-printing*
 							*E673* *E674* *E675*
 
-VIM supports printing of Chinese, Japanese, and Korean files.  Setting up VIM
+Vim supports printing of Chinese, Japanese, and Korean files.  Setting up Vim
 to correctly print CJK files requires setting up a few more options.
 
 Each of these countries has many standard character sets and encodings which
@@ -483,7 +483,7 @@ option allows you to specify different fonts to use when printing characters
 which are syntax highlighted with the font styles normal, italic, bold and
 bold-italic.
 
-No CJK fonts are supplied with VIM.  There are some free Korean, Japanese, and
+No CJK fonts are supplied with Vim.  There are some free Korean, Japanese, and
 Traditional Chinese fonts available at:
 
   http://examples.oreilly.com/cjkvinfo/adobe/samples/
@@ -498,7 +498,7 @@ CJK fonts can be large containing several thousand glyphs, and it is not
 uncommon to find that they only contain a subset of a national standard.  It
 is not unusual to find the fonts to not include characters for codes in the
 ASCII code range.  If you find half-width Roman characters are not appearing
-in your printout then you should configure VIM to use the Courier font the
+in your printout then you should configure Vim to use the Courier font the
 half-width ASCII characters with 'printmbfont'.  If your font does not include
 other characters then you will need to find another font that does.
 
@@ -506,7 +506,7 @@ Another issue with ASCII characters, is that the various national character
 sets specify a couple of different glyphs in the ASCII code range.  If you
 print ASCII text using the national character set you may see some unexpected
 characters.  If you want true ASCII code printing then you need to configure
-VIM to output ASCII characters for the ASCII code range with 'printmbfont'.
+Vim to output ASCII characters for the ASCII code range with 'printmbfont'.
 
 It is possible to define your own multi-byte character set although this
 should not be attempted lightly.  A discussion on the process if beyond the
@@ -525,13 +525,13 @@ print job completing.
 There are a number of possible causes as to why the printing may have failed:
 
 - Wrong version of the prolog resource file.  The prolog resource file
-  contains some PostScript that VIM needs to be able to print.  Each version
-  of VIM needs one particular version.  Make sure you have correctly installed
+  contains some PostScript that Vim needs to be able to print.  Each version
+  of Vim needs one particular version.  Make sure you have correctly installed
   the runtime files, and don't have any old versions of a file called prolog
   in the print directory in your 'runtimepath' directory.
 
 - Paper size.  Some PostScript printers will abort printing a file if they do
-  not support the requested paper size.  By default VIM uses A4 paper.  Find
+  not support the requested paper size.  By default Vim uses A4 paper.  Find
   out what size paper your printer normally uses and set the appropriate paper
   size with 'printoptions'.  If you cannot find the name of the paper used,
   measure a sheet and compare it with the table of supported paper sizes listed
@@ -668,7 +668,7 @@ complex print document creation.
 
 N-UP PRINTING
 
-The psnup utility takes an existing PostScript file generated from VIM and
+The psnup utility takes an existing PostScript file generated from Vim and
 convert it to an n-up version.  The simplest way to create a 2-up printout is
 to first create a PostScript file with: >
 
@@ -724,16 +724,16 @@ There are a couple of points to bear in mind:
 ==============================================================================
 8. Formfeed Characters					*printing-formfeed*
 
-By default VIM does not do any special processing of |formfeed| control
-characters.  Setting the 'printoptions' formfeed item will make VIM recognize
+By default Vim does not do any special processing of |formfeed| control
+characters.  Setting the 'printoptions' formfeed item will make Vim recognize
 formfeed characters and continue printing the current line at the beginning
 of the first line on a new page.  The use of formfeed characters provides
 rudimentary print control but there are certain things to be aware of.
 
-VIM will always start printing a line (including a line number if enabled)
+Vim will always start printing a line (including a line number if enabled)
 containing a formfeed character, even if it is the first character on the
 line.  This means if a line starting with a formfeed character is the first
-line of a page then VIM will print a blank page.
+line of a page then Vim will print a blank page.
 
 Since the line number is printed at the start of printing the line containing
 the formfeed character, the remainder of the line printed on the new page
@@ -742,7 +742,7 @@ lines of a long line when wrap in 'printoptions' is enabled).
 
 If the formfeed character is the last character on a line, then printing will
 continue on the second line of the new page, not the first.  This is due to
-VIM processing the end of the line after the formfeed character and moving
+Vim processing the end of the line after the formfeed character and moving
 down a line to continue printing.
 
 Due to the points made above it is recommended that when formfeed character

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 8.0.  Last change: 2016 Nov 04
+*quickfix.txt*  For Vim version 8.0.  Last change: 2017 Jun 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -45,10 +45,13 @@ The 'errorformat' option should be set to match the error messages from your
 compiler (see |errorformat| below).
 
 						*location-list* *E776*
-A location list is similar to a quickfix list and contains a list of positions
-in files.  A location list is associated with a window and each window can
-have a separate location list.  A location list can be associated with only
-one window.  The location list is independent of the quickfix list.
+A location list is a window-local quickfix list. You get one after commands
+like `:lvimgrep`, `:lgrep`, `:lhelpgrep`, `:lmake`, etc., which create a
+location list instead of a quickfix list as the corresponding `:vimgrep`,
+`:grep`, `:helpgrep`, `:make` do.
+A location list is associated with a window and each window can have a
+separate location list.  A location list can be associated with only one
+window.  The location list is independent of the quickfix list.
 
 When a window with a location list is split, the new window gets a copy of the
 location list.  When there are no longer any references to a location list,
@@ -164,6 +167,9 @@ processing a quickfix or location list command, it will be aborted.
 			keep Vim running while compiling.  If you give the
 			name of the errorfile, the 'errorfile' option will
 			be set to [errorfile].  See |:cc| for [!].
+			If the encoding of the error file differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							*:lf* *:lfile*
 :lf[ile][!] [errorfile]	Same as ":cfile", except the location list for the
@@ -175,6 +181,9 @@ processing a quickfix or location list command, it will be aborted.
 :cg[etfile] [errorfile]					*:cg* *:cgetfile*
 			Read the error file.  Just like ":cfile" but don't
 			jump to the first error.
+			If the encoding of the error file differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 
 :lg[etfile] [errorfile]					*:lg* *:lgetfile*
@@ -185,6 +194,9 @@ processing a quickfix or location list command, it will be aborted.
 :caddf[ile] [errorfile]	Read the error file and add the errors from the
 			errorfile to the current quickfix list. If a quickfix
 			list is not present, then a new list is created.
+			If the encoding of the error file differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							*:laddf* *:laddfile*
 :laddf[ile] [errorfile]	Same as ":caddfile", except the location list for the
@@ -320,6 +332,7 @@ use this code: >
 	endfunction
 
 	au QuickfixCmdPost make call QfMakeConv()
+Another option is using 'makeencoding'.
 
 
 EXECUTE A COMMAND IN ALL THE BUFFERS IN QUICKFIX OR LOCATION LIST:
@@ -459,7 +472,11 @@ keep its height, ignoring 'winheight' and 'equalalways'.  You can change the
 height manually (e.g., by dragging the status line above it with the mouse).
 
 In the quickfix window, each line is one error.  The line number is equal to
-the error number.  You can use ":.cc" to jump to the error under the cursor.
+the error number.  The current entry is highlighted with the QuickFixLine
+highlighting.  You can change it to your liking, e.g.: >
+	:hi QuickFixLine ctermbg=Yellow guibg=Yellow
+
+You can use ":.cc" to jump to the error under the cursor.
 Hitting the <Enter> key or double-clicking the mouse on a line has the same
 effect.  The file containing the error is opened in the window above the
 quickfix window.  If there already is a window for that file, it is used
@@ -586,6 +603,9 @@ lists, use ":cnewer 99" first.
 			   like |:cnext| and |:cprevious|, see above.
 			This command does not accept a comment, any "
 			characters are considered part of the arguments.
+			If the encoding of the program output differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							*:lmak* *:lmake*
 :lmak[e][!] [arguments]
@@ -645,6 +665,7 @@ read the error messages: >
 	au QuickfixCmdPost make call QfMakeConv()
 
 (Example by Faque Cheng)
+Another option is using 'makeencoding'.
 
 ==============================================================================
 5. Using :vimgrep and :grep				*grep* *lid*
@@ -759,6 +780,9 @@ id-utils) in a similar way to its compiler integration (see |:make| above).
 			When 'grepprg' is "internal" this works like
 			|:vimgrep|.  Note that the pattern needs to be
 			enclosed in separator characters then.
+			If the encoding of the program output differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							    *:lgr* *:lgrep*
 :lgr[ep][!] [arguments]	Same as ":grep", except the location list for the
@@ -783,6 +807,10 @@ id-utils) in a similar way to its compiler integration (see |:make| above).
 				  \ | catch /E480:/
 				  \ | endtry"
 <
+			If the encoding of the program output differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
+
 							*:lgrepa* *:lgrepadd*
 :lgrepa[dd][!] [arguments]
 			Same as ":grepadd", except the location list for the
@@ -1399,7 +1427,7 @@ prints information about entering a directory in the form "Making all in dir".
    Making all in dir2		  ./dir1/dir2
 
    This can be solved by printing absolute directories in the "enter directory"
-   message or by printing "leave directory" messages..
+   message or by printing "leave directory" messages.
 
 To avoid this problem, ensure to print absolute directory names and "leave
 directory" messages.

runtime/doc/quickref.txt

@@ -782,6 +782,7 @@ Short explanation of each option:		*option-list*
 'macatsui'		    Mac GUI: use ATSUI text drawing
 'magic'			    changes special characters in search patterns
 'makeef'	  'mef'     name of the errorfile for ":make"
+'makeencoding'	  'menc'    encoding of external make/grep commands
 'makeprg'	  'mp'	    program to use for the ":make" command
 'matchpairs'	  'mps'     pairs of characters that "%" can match
 'matchtime'	  'mat'     tenths of a second to show matching paren

runtime/doc/quotes.txt

@@ -63,53 +63,53 @@ versions of 'emacs' in the late 1970's and was relieved by finding 'vi' in the
 first UNIX I came across in 1983).  In my opinion, it's about time 'VIM'
 replace 'emacs' as the standard for top editors.  (Bo Thide', Sweden)
 
-I love and use VIM heavily too.  (Larry Wall)
+I love and use Vim heavily too.  (Larry Wall)
 
 Vi is like a Ferrari, if you're a beginner, it handles like a bitch, but once
 you get the hang of it, it's small, powerful and FAST! (Unknown)
-VIM is like a new model Ferrari, and sounds like one too - "VIIIIIIMMM!"
+Vim is like a new model Ferrari, and sounds like one too - "VIIIIIIMMM!"
 (Stephen Riehm, Germany)
 
-Schon bei Nutzung eines Bruchteils der VIM-Funktionen wird der Benutzer recht
+Schon bei Nutzung eines Bruchteils der Vim-Funktionen wird der Benutzer recht
 schnell die Vorzuege dieses Editors kennen- und schaetzenlernen.
-Translated: Even when only using a fraction of VIM-functions, the user will
+Translated: Even when only using a fraction of Vim-functions, the user will
 quickly get used to and appreciate the advantages of this editor.  (Garry
-Glendown, conclusion of an article on VIM in iX magazine 9/1998)
+Glendown, conclusion of an article on Vim in iX magazine 9/1998)
 
-I've recently acquired the O'Reilly book on VI (it also discusses VIM
+I've recently acquired the O'Reilly book on Vi (it also discusses Vim
 in-depth), and I'm amazed at just how powerful this application is.  (Jeffrey
 Rankin)
 
-This guide was written using the Windows 9.x distribution of GVIM, which is
+This guide was written using the Windows 9.x distribution of gvim, which is
 quite possibly the greatest thing to come along since God created the naked
 girl.  (Michael DiBernardo)
 
-Boy, I thought I knew almost everything about VIM, but every time I browse the
-online documentation, I hit upon a minor but cool aspect of a VIM feature that
+Boy, I thought I knew almost everything about Vim, but every time I browse the
+online documentation, I hit upon a minor but cool aspect of a Vim feature that
 I didn't know before!  I must say the documentation is one the finest I've
 ever seen in a product -- even better than most commercial products.
 (Gautam Mudunuri)
 
-VIM 4.5 is really a fantastic editor.  It has sooooo many features and more
+Vim 4.5 is really a fantastic editor.  It has sooooo many features and more
 importantly, the defaults are so well thought out that you really don't have
 to change anything!!  Words cannot express my amazement and gratitude to the
-creators of VIM.  Keep it up.  (Vikas, USA)
+creators of Vim.  Keep it up.  (Vikas, USA)
 
 I wonder how long it will be before people will refer to other Vi editors as
-VIM clones?  (Darren Hiebert)
+Vim clones?  (Darren Hiebert)
 
 I read about [auto-positioning-in-file-based-on-the-errors-from-make] in one
 of those "Perfect Programmer's Editor" threads and was delighted to discover
-that VIM already supports it.  (Brendan Macmillan, Australia)
+that Vim already supports it.  (Brendan Macmillan, Australia)
 
-I just discovered VIM (5.0) and I'm telling everyone I know about it!
-I tell them VIM stands for VI for the new (M)illenium.  Thanks so much!
+I just discovered Vim (5.0) and I'm telling everyone I know about it!
+I tell them Vim stands for Vi for the new (M)illenium.  Thanks so much!
 (Matt F. Valentine)
 
 I think from now on "vi" should be called "Vim Imitation", not the other way
 around.  (Rungun Ramanathan)
 
-The Law of VIM:
+The Law of Vim:
 For each member b of the possible behaviour space B of program P, there exists
 a finite time t before which at least one user u in the total user space U of
 program P will request b becomes a member of the allowed behaviour space B'
@@ -118,42 +118,42 @@ In other words: Sooner or later everyone wants everything as an option.
 (Negri)
 
 Whenever I move to a new computing platform, the first thing I do is to port
-VIM.  Lately, I am simply stunned by its ease of compilation using the
+Vim.  Lately, I am simply stunned by its ease of compilation using the
 configure facility.  (A.M. Sabuncu, Turkey)
 
 The options are really excellent and very powerful.  (Anish Maharaj)
 
 The Spring user-interface designs are in, and word from the boutiques is that
-80x24 text-only mode is back with a *vengeance! Vi editor clone VIM burst onto
+80x24 text-only mode is back with a *vengeance! Vi editor clone Vim burst onto
 March desk-tops with a dazzling show of pastel syntax highlights for its 5.0
-look.  Strident and customizable, VIM raises eyebrows with its interpretation
+look.  Strident and customizable, Vim raises eyebrows with its interpretation
 of the classic Vi single-key macro collection.
 http://www.ntk.net/index.cgi?back=archive98/now0327.txt&line=179#l
 
-I just wanted to take this opportunity to let you know that VIM 5 ROCKS!
+I just wanted to take this opportunity to let you know that Vim 5 ROCKS!
 Syntax highlighting: how did I survive without it?!  Thank you for creating
 mankind's best editor!  (Mun Johl, USA)
 
-Thanks again for VIM.  I use it every day on Linux.  (Eric Foster-Johnson,
+Thanks again for Vim.  I use it every day on Linux.  (Eric Foster-Johnson,
 author of the book "UNIX Programming Tools")
 
 The BEST EDITOR EVER (Stuart Woolford)
 
-I have used most of VIM's fancy features at least once, many frequently, and I
+I have used most of Vim's fancy features at least once, many frequently, and I
 can honestly say that I couldn't live with anything less anymore.  My
 productivity has easily doubled compared to what it was when I used vi.
 (Sitaram Chamarty)
 
-I luv VIM.  It is incredible.  I'm naming my first-born Vimberly.  (Jose
+I luv Vim.  It is incredible.  I'm naming my first-born Vimberly.  (Jose
 Unpingco, USA)
 
-Hint:  "VIM" is "vi improved" - much better! (Sven Guckes, Germany)
+Hint:  "Vim" is "vi improved" - much better! (Sven Guckes, Germany)
 
-I use VIM every day.  I spend more time in VIM than in any other program...
+I use Vim every day.  I spend more time in Vim than in any other program...
 It's the best vi clone there is.  I think it's great.  (Craig Sanders,
 Australia)
 
-I strongly advise using VIM--its infinite undo/redo saved me much grief.
+I strongly advise using Vim--its infinite undo/redo saved me much grief.
 (Terry Brown)
 
 Thanks very much for writing what in my opinion is the finest text editor on
@@ -163,98 +163,98 @@ the planet.  If I were to get another cat, I would name it "Vim".
 I typed :set all and the screen FILLED up with options.  A whole screen of
 things to be set and unset.  I saw some of my old friends like wrapmargin,
 modelines and showmode, but the screen was FILLED with new friends!   I love
-them all!   I love VIM!   I'm so happy that I've found this editor!  I feel
+them all!   I love Vim!   I'm so happy that I've found this editor!  I feel
 like how I once felt when I started using vi after a couple of years of using
 ed.  I never thought I'd forsake my beloved ed, but vi ... oh god, vi was
-great.  And now, VIM.  (Peter Jay Salzman, USA)
+great.  And now, Vim.  (Peter Jay Salzman, USA)
 
 I am really happy with such a wonderful software package.  Much better than
 almost any expensive, off the shelf program.  (Jeff Walker)
 
-Whenever I reread the VIM documentation I'm overcome with excitement at the
+Whenever I reread the Vim documentation I'm overcome with excitement at the
 power of the editor.  (William Edward Webber, Australia)
 
-Hurrah for VIM!! It is "at your fingertips" like vi, and has the extensions
+Hurrah for Vim!! It is "at your fingertips" like vi, and has the extensions
 that vi sorely needs: highlighting for executing commands on blocks, an easily
 navigable and digestible help screen, and more.  (Paul Pax)
 
 The reason WHY I don't have this amazingly useful macro anymore, is that I
-now use VIM - and this is built in!! (Stephen Riehm, Germany)
+now use Vim - and this is built in!! (Stephen Riehm, Germany)
 
-I am a user of VIM and I love it.  I use it to do all my programming, C,
+I am a user of Vim and I love it.  I use it to do all my programming, C,
 C++, HTML what ever.  (Tim Allwine)
 
-I discovered VIM after years of struggling with the original vi, and I just
+I discovered Vim after years of struggling with the original vi, and I just
 can't live without it anymore.  (Emmanuel Mogenet, USA)
 
-Emacs has not a bit of chance to survive so long as VIM is around.  Besides,
+Emacs has not a bit of chance to survive so long as Vim is around.  Besides,
 it also has the most detailed software documentation I have ever seen---much
 better than most commercial software!  (Leiming Qian)
 
-This version of VIM will just blow people apart when they discover just how
+This version of Vim will just blow people apart when they discover just how
 fantastic it is! (Tony Nugent, Australia)
 
-I took your advice & finally got VIM & I'm really impressed.  Instant convert.
+I took your advice & finally got Vim & I'm really impressed.  Instant convert.
 (Patrick Killelea, USA)
 
-VIM is by far my favorite piece of shareware and I have been particularly
+Vim is by far my favorite piece of shareware and I have been particularly
 pleased with version 3.0.  This is really a solid piece of work.  (Robert
 Colon, USA)
 
-VIM is a joy to use, it is so well thought and practical that I wonder why
-anybody would use visual development tools.  VIM is powerful and elegant, it
+Vim is a joy to use, it is so well thought and practical that I wonder why
+anybody would use visual development tools.  Vim is powerful and elegant, it
 looks deceptively simple but is almost as complex as a 747 (especially when I
-look at my growing .vimrc), keep up that wonderful job, VIM is a centerpiece
+look at my growing .vimrc), keep up that wonderful job, Vim is a centerpiece
 of the free software world.  (Louis-David Mitterand, USA)
 
-I cannot believe how great it is to use VIM.  I think the guys at work are
+I cannot believe how great it is to use Vim.  I think the guys at work are
 getting tired of hearing me bragging about it.  Others eyes are lighting up.
 (Rick Croote)
 
 Emacs takes way too much time to start up and run, it is too big and bulky for
-effective use and the interface is more confusing than it is of any help.  VIM
+effective use and the interface is more confusing than it is of any help.  Vim
 however is short, it is fast, it is powerful, it has a good interface and it
 is all purpose.  (Paal Ditlefsen Ekran)
 
-From the first time I got VIM3.0, I was very enthusiastic.  It has almost no
+From the first time I got Vim3.0, I was very enthusiastic.  It has almost no
 problems.  The swapfile handling and the backup possibilities are robust, also
 the protection against editing one file twice.  It is very compatible to the
 real VI (and that is a MUST, because my brain is trained over years in using
 it).  (Gert van Antwerpen, Holland)
 
-Visual mode in VIM is a very powerful thing! (Tony Nugent, Australia)
+Visual mode in Vim is a very powerful thing! (Tony Nugent, Australia)
 
-I have to say that VIM is =THE= single greatest piece of source code to ever
+I have to say that Vim is =THE= single greatest piece of source code to ever
 come across the net (Jim Battle, USA).
 
-In fact, if you do want to get a new vi I'd suggest VIM-3.0.  This is, by
+In fact, if you do want to get a new vi I'd suggest Vim-3.0.  This is, by
 far, the best version of vi I've ever seen (Albert W. Schueller).
 
-I should mention that VIM is a very good editor and can compete with anything
+I should mention that Vim is a very good editor and can compete with anything
 (Ilya Beloozerov).
 
 To tell the truth sometimes I used elvis, vile, xvi, calvin, etc.  And this is
-the reason that I can state that VIM is the best! (Ferenc Deak, Hungary)
+the reason that I can state that Vim is the best! (Ferenc Deak, Hungary)
 
-VIM is by far the best editor that I have used in a long time, and I have
+Vim is by far the best editor that I have used in a long time, and I have
 looked at just about every thing that is available for every platform that I
-use.  VIM is the best on all of them.  (Guy L. Oliver)
+use.  Vim is the best on all of them.  (Guy L. Oliver)
 
-VIM is the greatest editor since the stone chisel.  (Jose Unpingco, USA)
+Vim is the greatest editor since the stone chisel.  (Jose Unpingco, USA)
 
-I would like to say that with VIM I am finally making the 'emacs to vi'
+I would like to say that with Vim I am finally making the 'emacs to vi'
 transition - as an Editor it is so much better in many ways: keyboard layout,
 memory usage, text alteration to name 3.  (Mark Adam)
 
 In fact, now if I want to know what a particular setting does in vi, I fire up
-VIM and check out its help!  (Nikhil Patel, USA)
+Vim and check out its help!  (Nikhil Patel, USA)
 
-As a vi user, VIM has made working with text a far more pleasant task than
+As a vi user, Vim has made working with text a far more pleasant task than
 before I encountered this program.  (Steinar Knutsen, Norway)
 
-I use VIM since version 3.0.  Since that time, it is the ONLY editor I use,
-with Solaris, Linux and OS/2 Warp.  I suggest all my friends to use VIM, they
-try, and they continue using it.  VIM is really the best software I have ever
+I use Vim since version 3.0.  Since that time, it is the ONLY editor I use,
+with Solaris, Linux and OS/2 Warp.  I suggest all my friends to use Vim, they
+try, and they continue using it.  Vim is really the best software I have ever
 downloaded from the Internet, and the best editor I know of.  (Marco
 Eccettuato, Italy)
 

runtime/doc/remote.txt

@@ -1,4 +1,4 @@
-*remote.txt*    For Vim version 8.0.  Last change: 2015 Mar 01
+*remote.txt*    For Vim version 8.0.  Last change: 2017 Mar 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -149,6 +149,7 @@ the description in |eval.txt| or use CTRL-] on the function name to jump to
 the full explanation.
 
     synopsis				     explanation ~
+    remote_startserver( name)		     run a server
     remote_expr( server, string, idvar)      send expression
     remote_send( server, string, idvar)      send key sequence
     serverlist()			     get a list of available servers

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 8.0.  Last change: 2017 Feb 06
+*repeat.txt*    For Vim version 8.0.  Last change: 2017 Jun 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -46,7 +46,7 @@ of area is used, see |visual-repeat|.
 ==============================================================================
 2. Multiple repeats					*multi-repeat*
 
-						*:g* *:global* *E147* *E148*
+						*:g* *:global* *E148*
 :[range]g[lobal]/{pattern}/[cmd]
 			Execute the Ex command [cmd] (default ":p") on the
 			lines within [range] where {pattern} matches.
@@ -79,8 +79,15 @@ The default for [range] is the whole buffer (1,$).  Use "CTRL-C" to interrupt
 the command.  If an error message is given for a line, the command for that
 line is aborted and the global command continues with the next marked or
 unmarked line.
+								*E147* 
+When the command is used recursively, it only works on one line.  Giving a
+range is then not allowed. This is useful to find all lines that match a
+pattern and do not match another pattern: >
+	:g/found/v/notfound/{cmd}
+This first finds all lines containing "found", but only executes {cmd} when
+there is no match for "notfound".
 
-To repeat a non-Ex command, you can use the ":normal" command: >
+To execute a non-Ex command, you can use the `:normal` command: >
 	:g/pat/normal {commands}
 Make sure that {commands} ends with a whole command, otherwise Vim will wait
 for you to type the rest of the command for each match.  The screen will not

runtime/doc/scroll.txt

@@ -221,7 +221,7 @@ past its buffer's limits.
 However, if a 'scrollbind' window that has a relative offset that is past its
 buffer's limits is given the cursor focus, the other 'scrollbind' windows must
 jump to a location where the current window's relative offset is valid.  This
-behavior can be changed by clearing the 'jump' flag from the 'scrollopt'
+behavior can be changed by clearing the "jump" flag from the 'scrollopt'
 option.
 
 						*syncbind* *:syncbind* *:sync*

runtime/doc/spell.txt

@@ -478,7 +478,7 @@ Vim uses a binary file format for spelling.  This greatly speeds up loading
 the word list and keeps it small.
 						    *.aff* *.dic* *Myspell*
 You can create a Vim spell file from the .aff and .dic files that Myspell
-uses.  Myspell is used by OpenOffice.org and Mozilla. The OpenOffice .oxt 
+uses.  Myspell is used by OpenOffice.org and Mozilla. The OpenOffice .oxt
 files are zip files which contain the .aff and .dic files. You should be able
 to find them here:
 	http://extensions.services.openoffice.org/dictionary
@@ -1614,7 +1614,7 @@ COMPOUNDSYLLABLE  (Hunspell)			*spell-COMPOUNDSYLLABLE*
 KEY		(Hunspell)				*spell-KEY*
 		Define characters that are close together on the keyboard.
 		Used to give better suggestions.  Not supported.
-		
+
 LANG		(Hunspell)				*spell-LANG*
 		This specifies language-specific behavior.  This actually
 		moves part of the language knowledge into the program,

runtime/doc/syntax.txt

@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 8.0.  Last change: 2017 Feb 06
+*syntax.txt*	For Vim version 8.0.  Last change: 2017 Jun 04
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -2646,9 +2646,9 @@ later, and part earlier) adds.
 
 RESTRUCTURED TEXT			*rst.vim* *ft-rst-syntax*
 
-You may set what syntax definitions should be used for code blocks via
+You may set what syntax definitions should be used for code blocks via >
 	let rst_syntax_code_list = ['vim', 'lisp', ...]
-
+<
 
 REXX						*rexx.vim* *ft-rexx-syntax*
 
@@ -3327,8 +3327,8 @@ Some folding is now supported with syntax/vim.vim: >
    g:vimsyn_folding =~ 't' : fold tcl      script
 <
 							*g:vimsyn_noerror*
-Not all error highlighting that syntax/vim.vim does may be correct; VimL is a
-difficult language to highlight correctly.  A way to suppress error
+Not all error highlighting that syntax/vim.vim does may be correct; Vim script
+is a difficult language to highlight correctly.  A way to suppress error
 highlighting is to put the following line in your |vimrc|: >
 
 	let g:vimsyn_noerror = 1
@@ -4812,10 +4812,11 @@ ctermbg={color-nr}				*highlight-ctermbg*
 	Example: >
 		:highlight Normal ctermfg=grey ctermbg=darkblue
 <	When setting the "ctermbg" color for the Normal group, the
-	'background' option will be adjusted automatically.  This causes the
-	highlight groups that depend on 'background' to change!  This means
-	you should set the colors for Normal first, before setting other
-	colors.
+	'background' option will be adjusted automatically, under the
+	condition that the color is recognized and 'background' was not set
+	explicitly.  This causes the highlight groups that depend on
+	'background' to change!  This means you should set the colors for
+	Normal first, before setting other colors.
 	When a colorscheme is being used, changing 'background' causes it to
 	be reloaded, which may reset all colors (including Normal).  First
 	delete the "g:colors_name" variable when you don't want this.

runtime/doc/tags

@@ -427,6 +427,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'macatsui'	options.txt	/*'macatsui'*
 'magic'	options.txt	/*'magic'*
 'makeef'	options.txt	/*'makeef'*
+'makeencoding'	options.txt	/*'makeencoding'*
 'makeprg'	options.txt	/*'makeprg'*
 'mat'	options.txt	/*'mat'*
 'matchpairs'	options.txt	/*'matchpairs'*
@@ -439,6 +440,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'maxmemtot'	options.txt	/*'maxmemtot'*
 'mco'	options.txt	/*'mco'*
 'mef'	options.txt	/*'mef'*
+'menc'	options.txt	/*'menc'*
 'menuitems'	options.txt	/*'menuitems'*
 'mesg'	vi_diff.txt	/*'mesg'*
 'mfd'	options.txt	/*'mfd'*
@@ -943,6 +945,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 't_F7'	term.txt	/*'t_F7'*
 't_F8'	term.txt	/*'t_F8'*
 't_F9'	term.txt	/*'t_F9'*
+'t_GP'	term.txt	/*'t_GP'*
 't_IE'	term.txt	/*'t_IE'*
 't_IS'	term.txt	/*'t_IS'*
 't_K1'	term.txt	/*'t_K1'*
@@ -965,6 +968,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 't_KJ'	term.txt	/*'t_KJ'*
 't_KK'	term.txt	/*'t_KK'*
 't_KL'	term.txt	/*'t_KL'*
+'t_PE'	term.txt	/*'t_PE'*
+'t_PS'	term.txt	/*'t_PS'*
 't_RB'	term.txt	/*'t_RB'*
 't_RI'	term.txt	/*'t_RI'*
 't_RV'	term.txt	/*'t_RV'*
@@ -1923,6 +1928,13 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :Print	various.txt	/*:Print*
 :Rexplore	pi_netrw.txt	/*:Rexplore*
 :RmVimball	pi_vimball.txt	/*:RmVimball*
+:RustEmitAsm	ft_rust.txt	/*:RustEmitAsm*
+:RustEmitIr	ft_rust.txt	/*:RustEmitIr*
+:RustExpand	ft_rust.txt	/*:RustExpand*
+:RustFmt	ft_rust.txt	/*:RustFmt*
+:RustFmtRange	ft_rust.txt	/*:RustFmtRange*
+:RustPlay	ft_rust.txt	/*:RustPlay*
+:RustRun	ft_rust.txt	/*:RustRun*
 :Sexplore	pi_netrw.txt	/*:Sexplore*
 :TOhtml	syntax.txt	/*:TOhtml*
 :TarDiff	pi_tar.txt	/*:TarDiff*
@@ -3266,6 +3278,9 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 <Char>	map.txt	/*<Char>*
 <CursorHold>	autocmd.txt	/*<CursorHold>*
 <D-	intro.txt	/*<D-*
+<D-c>	os_mac.txt	/*<D-c>*
+<D-v>	os_mac.txt	/*<D-v>*
+<D-x>	os_mac.txt	/*<D-x>*
 <Del>	change.txt	/*<Del>*
 <Down>	motion.txt	/*<Down>*
 <Drop>	change.txt	/*<Drop>*
@@ -4500,6 +4515,12 @@ E937	autocmd.txt	/*E937*
 E938	eval.txt	/*E938*
 E939	change.txt	/*E939*
 E94	windows.txt	/*E94*
+E940	eval.txt	/*E940*
+E941	eval.txt	/*E941*
+E942	eval.txt	/*E942*
+E943	message.txt	/*E943*
+E944	pattern.txt	/*E944*
+E945	pattern.txt	/*E945*
 E95	message.txt	/*E95*
 E96	diff.txt	/*E96*
 E97	diff.txt	/*E97*
@@ -5008,6 +5029,7 @@ assert_inrange()	eval.txt	/*assert_inrange()*
 assert_match()	eval.txt	/*assert_match()*
 assert_notequal()	eval.txt	/*assert_notequal()*
 assert_notmatch()	eval.txt	/*assert_notmatch()*
+assert_report()	eval.txt	/*assert_report()*
 assert_true()	eval.txt	/*assert_true()*
 at	motion.txt	/*at*
 atan()	eval.txt	/*atan()*
@@ -5071,6 +5093,7 @@ backup-changed	version4.txt	/*backup-changed*
 backup-extension	version4.txt	/*backup-extension*
 backup-table	editing.txt	/*backup-table*
 balloon-eval	debugger.txt	/*balloon-eval*
+balloon_show()	eval.txt	/*balloon_show()*
 bar	motion.txt	/*bar*
 bars	help.txt	/*bars*
 base_font_name_list	mbyte.txt	/*base_font_name_list*
@@ -5344,6 +5367,7 @@ cino-:	indent.txt	/*cino-:*
 cino-=	indent.txt	/*cino-=*
 cino->	indent.txt	/*cino->*
 cino-C	indent.txt	/*cino-C*
+cino-E	indent.txt	/*cino-E*
 cino-J	indent.txt	/*cino-J*
 cino-L	indent.txt	/*cino-L*
 cino-M	indent.txt	/*cino-M*
@@ -6121,6 +6145,7 @@ ft-rexx-syntax	syntax.txt	/*ft-rexx-syntax*
 ft-rst-syntax	syntax.txt	/*ft-rst-syntax*
 ft-ruby-omni	insert.txt	/*ft-ruby-omni*
 ft-ruby-syntax	syntax.txt	/*ft-ruby-syntax*
+ft-rust	filetype.txt	/*ft-rust*
 ft-scheme-syntax	syntax.txt	/*ft-scheme-syntax*
 ft-sdl-syntax	syntax.txt	/*ft-sdl-syntax*
 ft-sed-syntax	syntax.txt	/*ft-sed-syntax*
@@ -6153,6 +6178,7 @@ ft-xpm-syntax	syntax.txt	/*ft-xpm-syntax*
 ft-yaml-syntax	syntax.txt	/*ft-yaml-syntax*
 ft-zsh-syntax	syntax.txt	/*ft-zsh-syntax*
 ft_ada.txt	ft_ada.txt	/*ft_ada.txt*
+ft_rust.txt	ft_rust.txt	/*ft_rust.txt*
 ft_sql.txt	ft_sql.txt	/*ft_sql.txt*
 ftdetect	filetype.txt	/*ftdetect*
 ftp	pi_netrw.txt	/*ftp*
@@ -6230,6 +6256,7 @@ g:decada.Make_Command	ft_ada.txt	/*g:decada.Make_Command*
 g:decada.Unit_Name()	ft_ada.txt	/*g:decada.Unit_Name()*
 g:filetype_csh	syntax.txt	/*g:filetype_csh*
 g:filetype_r	syntax.txt	/*g:filetype_r*
+g:ftplugin_rust_source_path	ft_rust.txt	/*g:ftplugin_rust_source_path*
 g:gnat	ft_ada.txt	/*g:gnat*
 g:gnat.Error_Format	ft_ada.txt	/*g:gnat.Error_Format*
 g:gnat.Find()	ft_ada.txt	/*g:gnat.Find()*
@@ -6359,6 +6386,20 @@ g:netrw_win95ftp	pi_netrw.txt	/*g:netrw_win95ftp*
 g:netrw_winsize	pi_netrw.txt	/*g:netrw_winsize*
 g:netrw_wiw	pi_netrw.txt	/*g:netrw_wiw*
 g:netrw_xstrlen	pi_netrw.txt	/*g:netrw_xstrlen*
+g:rust_bang_comment_leader	ft_rust.txt	/*g:rust_bang_comment_leader*
+g:rust_conceal	ft_rust.txt	/*g:rust_conceal*
+g:rust_conceal_mod_path	ft_rust.txt	/*g:rust_conceal_mod_path*
+g:rust_conceal_pub	ft_rust.txt	/*g:rust_conceal_pub*
+g:rust_fold	ft_rust.txt	/*g:rust_fold*
+g:rust_playpen_url	ft_rust.txt	/*g:rust_playpen_url*
+g:rust_recommended_style	ft_rust.txt	/*g:rust_recommended_style*
+g:rust_shortener_url	ft_rust.txt	/*g:rust_shortener_url*
+g:rustc_makeprg_no_percent	ft_rust.txt	/*g:rustc_makeprg_no_percent*
+g:rustc_path	ft_rust.txt	/*g:rustc_path*
+g:rustfmt_autosave	ft_rust.txt	/*g:rustfmt_autosave*
+g:rustfmt_command	ft_rust.txt	/*g:rustfmt_command*
+g:rustfmt_fail_silently	ft_rust.txt	/*g:rustfmt_fail_silently*
+g:rustfmt_options	ft_rust.txt	/*g:rustfmt_options*
 g:syntax_on	syntax.txt	/*g:syntax_on*
 g:tar_browseoptions	pi_tar.txt	/*g:tar_browseoptions*
 g:tar_cmd	pi_tar.txt	/*g:tar_cmd*
@@ -7141,9 +7182,11 @@ m`	motion.txt	/*m`*
 mac	os_mac.txt	/*mac*
 mac-bug	os_mac.txt	/*mac-bug*
 mac-compile	os_mac.txt	/*mac-compile*
+mac-darwin-feature	os_mac.txt	/*mac-darwin-feature*
 mac-faq	os_mac.txt	/*mac-faq*
 mac-filename	os_mac.txt	/*mac-filename*
 mac-lack	os_mac.txt	/*mac-lack*
+mac-standard-mappings	os_mac.txt	/*mac-standard-mappings*
 mac-vimfile	os_mac.txt	/*mac-vimfile*
 macintosh	os_mac.txt	/*macintosh*
 macro	map.txt	/*macro*
@@ -7654,6 +7697,8 @@ nice	todo.txt	/*nice*
 no-eval-feature	eval.txt	/*no-eval-feature*
 no-type-checking	eval.txt	/*no-type-checking*
 no_buffers_menu	gui.txt	/*no_buffers_menu*
+no_mail_maps	filetype.txt	/*no_mail_maps*
+no_plugin_maps	filetype.txt	/*no_plugin_maps*
 non-greedy	pattern.txt	/*non-greedy*
 non-zero-arg	eval.txt	/*non-zero-arg*
 none-variable	eval.txt	/*none-variable*
@@ -7883,6 +7928,7 @@ python-bindeval	if_pyth.txt	/*python-bindeval*
 python-bindeval-objects	if_pyth.txt	/*python-bindeval-objects*
 python-buffer	if_pyth.txt	/*python-buffer*
 python-buffers	if_pyth.txt	/*python-buffers*
+python-building	if_pyth.txt	/*python-building*
 python-chdir	if_pyth.txt	/*python-chdir*
 python-command	if_pyth.txt	/*python-command*
 python-commands	if_pyth.txt	/*python-commands*
@@ -8011,6 +8057,7 @@ remote_foreground()	eval.txt	/*remote_foreground()*
 remote_peek()	eval.txt	/*remote_peek()*
 remote_read()	eval.txt	/*remote_read()*
 remote_send()	eval.txt	/*remote_send()*
+remote_startserver()	eval.txt	/*remote_startserver()*
 remove()	eval.txt	/*remove()*
 remove-filetype	filetype.txt	/*remove-filetype*
 remove-option-flags	options.txt	/*remove-option-flags*
@@ -8066,6 +8113,13 @@ russian-issues	russian.txt	/*russian-issues*
 russian-keymap	russian.txt	/*russian-keymap*
 russian-l18n	russian.txt	/*russian-l18n*
 russian.txt	russian.txt	/*russian.txt*
+rust	ft_rust.txt	/*rust*
+rust-commands	ft_rust.txt	/*rust-commands*
+rust-intro	ft_rust.txt	/*rust-intro*
+rust-mappings	ft_rust.txt	/*rust-mappings*
+rust-settings	ft_rust.txt	/*rust-settings*
+rust_<D-R>	ft_rust.txt	/*rust_<D-R>*
+rust_<D-r>	ft_rust.txt	/*rust_<D-r>*
 rview	starting.txt	/*rview*
 rvim	starting.txt	/*rvim*
 rxvt	syntax.txt	/*rxvt*
@@ -8477,6 +8531,7 @@ t_F6	term.txt	/*t_F6*
 t_F7	term.txt	/*t_F7*
 t_F8	term.txt	/*t_F8*
 t_F9	term.txt	/*t_F9*
+t_GP	term.txt	/*t_GP*
 t_IE	term.txt	/*t_IE*
 t_IS	term.txt	/*t_IS*
 t_K1	term.txt	/*t_K1*
@@ -8732,20 +8787,23 @@ termcap-options	term.txt	/*termcap-options*
 termcap-title	term.txt	/*termcap-title*
 terminal-colors	os_unix.txt	/*terminal-colors*
 terminal-info	term.txt	/*terminal-info*
+terminal-key-codes	term.txt	/*terminal-key-codes*
 terminal-options	term.txt	/*terminal-options*
+terminal-output-codes	term.txt	/*terminal-output-codes*
 terminfo	term.txt	/*terminfo*
 termresponse-variable	eval.txt	/*termresponse-variable*
 test-functions	usr_41.txt	/*test-functions*
 test_alloc_fail()	eval.txt	/*test_alloc_fail()*
 test_autochdir()	eval.txt	/*test_autochdir()*
-test_disable_char_avail()	eval.txt	/*test_disable_char_avail()*
 test_garbagecollect_now()	eval.txt	/*test_garbagecollect_now()*
+test_ignore_error()	eval.txt	/*test_ignore_error()*
 test_null_channel()	eval.txt	/*test_null_channel()*
 test_null_dict()	eval.txt	/*test_null_dict()*
 test_null_job()	eval.txt	/*test_null_job()*
 test_null_list()	eval.txt	/*test_null_list()*
 test_null_partial()	eval.txt	/*test_null_partial()*
 test_null_string()	eval.txt	/*test_null_string()*
+test_override()	eval.txt	/*test_override()*
 test_settime()	eval.txt	/*test_settime()*
 testing	eval.txt	/*testing*
 testing-variable	eval.txt	/*testing-variable*

runtime/doc/term.txt

@@ -1,4 +1,4 @@
-*term.txt*      For Vim version 8.0.  Last change: 2017 Feb 02
+*term.txt*      For Vim version 8.0.  Last change: 2017 Apr 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -252,7 +252,7 @@ But any non-empty string means that the flag is set.  An empty string means
 that the flag is not set.  't_CS' works like this too, but it isn't a termcap
 flag.
 
-OUTPUT CODES
+OUTPUT CODES						*terminal-output-codes*
 	option	meaning	~
 
 	t_AB	set background color (ANSI)			*t_AB* *'t_AB'*
@@ -314,6 +314,7 @@ Added by Vim (there are no standard codes for these):
 	t_IS	set icon text start				*t_IS* *'t_IS'*
 	t_IE	set icon text end				*t_IE* *'t_IE'*
 	t_WP	set window position (Y, X) in pixels		*t_WP* *'t_WP'*
+	t_GP	get window position (Y, X) in pixels		*t_GP* *'t_GP'*
 	t_WS	set window size (height, width) in characters	*t_WS* *'t_WS'*
 	t_SI	start insert mode (bar cursor shape)		*t_SI* *'t_SI'*
 	t_SR	start replace mode (underline cursor shape)	*t_SR* *'t_SR'*
@@ -333,7 +334,7 @@ Added by Vim (there are no standard codes for these):
 	t_BD	disable bracketed paste mode			*t_BD* *'t_BD'*
 		|xterm-bracketed-paste|
 
-KEY CODES
+KEY CODES						*terminal-key-codes*
 Note: Use the <> form if possible
 
 	option	name		meaning	~
@@ -424,8 +425,9 @@ Note: Use the <> form if possible
 	t_KK	<k8>		keypad 8		 *<k8>*	*t_KK* *'t_KK'*
 	t_KL	<k9>		keypad 9		 *<k9>*	*t_KL* *'t_KL'*
 		<Mouse>		leader of mouse code		*<Mouse>*
-	t_PS	start of bracketed paste |xterm-bracketed-paste|  *t_PS* 't_PS'
-	t_PE	end of bracketed paste |xterm-bracketed-paste|    *t_PE* 't_PE'
+								*t_PS* *'t_PS'*
+	t_PS	start of bracketed paste |xterm-bracketed-paste|
+	t_PE	end of bracketed paste |xterm-bracketed-paste|  *t_PE* *'t_PE'*
 
 Note about t_so and t_mr: When the termcap entry "so" is not present the
 entry for "mr" is used.  And vice versa.  The same is done for "se" and "me".

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.0.  Last change: 2017 Feb 17
+*todo.txt*      For Vim version 8.0.  Last change: 2017 Jun 13
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -35,18 +35,9 @@ entered there will not be repeated below, unless there is extra information.
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-Patch 195 introduced a regression in tag priority. (Charles Campbell, 2017 Feb
-10)
-
-Memory leak in test97?
-
-exists('&t_k1') returns false even when t_k1 was set.
-Use in test_assign.vim to only get value of &t_k1 if it exists. #1459
-
-test_gui fails with Athena:
-   Caught exception in Test_1_set_secure(): Vim(gui):E285: Failed to create input context @ function RunTheTest[21]..Test_1_set_secure, line 2
-
 +channel:
+- When redrawing for the channel buffer, command line completion is cleared.
+  (Ramel Eshed, 2017 May 4)
 - Try out background make plugin: 
   https://github.com/AndrewVos/vim-make-background
 - Problem with stderr on Windows? (Vincent Rischmann, 2016 Aug 31, #1026)
@@ -115,9 +106,91 @@ Regexp problems:
   had_endbrace[] is set but not initialized or used.
 - Difference between two engines: ".*\zs\/\@>\/" on text "///"
   (Chris Paul, 2016 Nov 13)  New engine not greedy enough?
+  Another one: echom matchstr(" sdfsfsf\n sfdsdfsdf",'[^\n]*')
+  (2017 May 15, #1252)
+
+With foldmethod=syntax and nofoldenable comment highlighting isn't removed.
+(Marcin Szewczyk, 2017 Apr 26)
+
+ml_get error when using a Python. (Yggdroot, 2017 Jun 1, #1737)
+Lemonboy can reproduce (2017 Jun 5)
+
+ml_get errors with buggy script. (Dominique, 2017 Apr 30)
+
+Error in emsg with buggy script. (Dominique, 2017 Apr 30)
+
+Add options_default() / options_restore() to set several options to Vim
+defaults for a plugin. Comments from Zyx, 2017 May 10.
+Perhaps use a vimcontext / endvimcontext command block.
+
+Using freed memory with "qf" FileType autocommand that does :cclose.
+(Lemonboy, 2017 May 28, #1730, fix in 1734, with test that doesn't fail, but
+it fails when run manually)  Add "starting" to test_override()?
+
+Problem with three-piece comment. (Michael Lee, 2017 May 11, #1696)
+
+When checking if a bufref is valid, also check the buffer number, to catch the
+case of :bwipe followed by :new.
+
+Files for Latvian language. (Vitolins, 2017 May 3, #1675)
+
+Setting 'clipboard' to "unnamed" makes a global command very slow (Daniel
+Drucker, 2017 May 8).
+This was supposed to be fixed, did it break again somehow?
+Christian cannot reproduce it.
+
+Better TeX indent file. (Christian Brabandt, 2017 May 3)
+
+Openhab syntax file (mueller, #1678)
+
+Use gvimext.dll from the nightly build? (Issue #249)
+
+'synmaxcol' works with bytes instead of screen cells. (Llandon, 2017 May 31,
+#1736)
+
+Problem with using :cd when remotely editing a file. (Gerd Wachsmuth, 2017 May
+8, #1690)
+
+'equalalways' only works for one column. (Glacambre, 2017 May 15, #1707)
+
+Include solarized color scheme?
+
+Updates to GTK help. (Kazunobu Kuriyama, 2017 May 4)
+
+Running test_gui and test_gui_init with Motif sometimes kills the window
+manager.  Problem with Motif?
+
+Bogus characters inserted when triggering indent while changing text.
+(Vitor Antunes, 2016 Nov 22, #1269)
+
+Segmentation fault with complete(). (Lifepillar, 2017 Apr 29, #1668)
+Check for "pat" to be NULL in search_for_exact_line()?
+How did it get NULL?  Comment by Christian, Apr 30.
+
+Is it possible to keep the complete menu open when calling complete()?
+(Prabir Shrestha, 2017 May 19, #1713)
+
+Memory leak in test97?  The string is actually freed.  Weird.
+
+New value "uselast" for 'switchbuf'. (Lemonboy, 2017 Apr 23, #1652)
 
 Add a toolbar in the terminal.  Can be global, above all windows, or specific
 for one window.
+
+Make maparg() also return the raw rhs, so that it doesn't depend on 'cpo'.
+(Brett Stahlman, 2017 May 23)
+Even better: add a way to disable a mapping temporarily and re-enable it
+later.  This is for a sub-mode that is active for a short while (one buffer).
+Still need maplist() to find the mappings.  What can we use to identify a
+mapping?  Something unique would be better than the LHS.
+Perhaps simpler: actually delete the mappings.  Use maplist() to list matching
+mappings (with a lhs prefix, like maparg()), mapdelete() to delete,
+maprestore() to restore (using the output of maplist().
+
+Add an argument to :mkvimrc (or add aother command) to skip mappings from
+plugins (source is a Vim script).  No need to put these in a .vimrc, they will
+be defined when the plugin is loaded.
+
 Use tb_set(winid, [{'text': 'stop', 'cb': callback, 'hi': 'Green'}])
     tb_highlight(winid, 'ToolBar')
     tb_get(winid)
@@ -127,79 +200,41 @@ What if there is an invalid character?
 
 Json string with trailing \u should be an error. (Lcd)
 
-Patch for double free setting 'ttytype' (Dominique, 2017 Feb 10, #1461)
-
-Patch for using uninitialized memory (Dominique, 2017 Feb 11, #1464)
-
-Patch for crash setting 'guicursor'. (Dominique, 2017 Feb 11, #1465)
-
-Multi-byte bug: dv} splits char. (Urtica Dioica, 2017 Jan 9)
-
-Patch to add test for 'number' and 'relativenumber'. (Ozaki Kiichi, #1447)
-Now merged in test89 (Feb 12)
-
-Patch to fix tabline redraw. (Christian Brabandt, 2017 Feb 10)
-Better way to fix this?
-
 When session file has name in argument list but the buffer was deleted, the
 buffer is not deleted when using the session file. (#1393)
 Should add the buffer in hidden state.
 
-Patch to change VimL to "Vim script". (Hirohito Higashi, 2017 Feb 14)
-
-Invalid memory access with :normal command. (Dominique Pelle, 2017 Feb 14)
-
-When "gf" excludes following ":99", jump to line 99.
-Also when editing a file foo.txt:99 ?
-
 When an item in the quickfix list has a file name that does not exist, behave
 like the item was not a match for :cnext.
 
-Patch for warning about integer overflow in undo.c (King, 2017 Feb 12)
-And another similar one.
-
-Patch for null pointer use in undo.c (King, 2017 Feb 12)
-
-Patch to avoid using CTRL-O when do_cmdline_cmd is called. (James McCoy, 2017
-Feb 7, #1453)
-
-Patch for multi-byte line wrap. (Ozaki Kiichi, 2017 Feb 7, #1456)
-
-Patch to show balloon with a function. (Jusufadis Bakamovic, #1449)
-
 Wrong diff highlighting with three files. (2016 Oct 20, #1186)
 Also get E749 on exit.
 Another example in #1309
 
-Completion for user-defined commands does not work if a few characters were
-already typed. (Dominique, 2017 Jan 26)
-
-Patch for nsis script to add a dll file. (Christian Brabandt, 2017 Feb 10)
-Also include the .dll file?
-
-Patch for capitalizations in menus. (Zhen-Huan Hu, 2017 Feb 9)
+Patch to change all use of &sw to shiftwidth(). (Tyru, 2017 Feb 19)
+Takuya Fujiwara
+Wait until maintainers integrate it.
 
 When deleting a mark or register, leave a tombstone, so that it's also deleted
 when writing viminfo (and the delete was the most recent action). #1339
 
-Patch for better explanation of 'compatible' side effects.
-https://github.com/vim/vim/pull/1161/files
-
-Patch to add 'makeencoding', useful when the system encoding differs from
-Vim's 'encoding' setting. (Ken Takata, 2017 Jan 31)
-
-Patch to adjust marks when adding a new line to the end of buffer in diff
-mode. (James McCoy, 2016 Dec 14, #1329)
-
 Suggestion to improve pt-br spell checking. (Marcelo D Montu, 2016 Dec 15,
 #1330)
 
 Error in test_startup_utf8 on Solaris. (Danek Duvall, 2016 Aug 17)
 
-Patch to fix that test87 fails on Arch Linux. (Jesin, 2017 Feb 10)
-
 Completion for :!cmd shows each match twice. #1435
 
+Patch to change GUI behavior: instead of changing the window size change the
+lines/columns when menu/toolbar/etc. is added/removed. (Ychin, 2016 Mar 20,
+#703)
+
+GTK: When adding a timer from 'balloonexpr' it won't fire, because
+g_main_context_iteration() doesn't return.  Need to trigger an event when the
+timer expires.
+
+Screen update bug related to matchparen.  (Chris Heath, 2017 Mar 4, #1532)
+
 Rule to use "^" for statusline does not work if a space is defined with
 highlighting for both stl and stlnc.  Patch by Ken Hamada (itchyny, 2016 Dec 11)
 
@@ -209,14 +244,18 @@ highlighting for both stl and stlnc.  Patch by Ken Hamada (itchyny, 2016 Dec 11)
 Using CTRL-G_U in InsertCharPre causes trouble for redo. (Israel Chauca
 Fuentes, 2017 Feb 12, #1470)
 
+Check for errors E704 and E705 only does VAR_FUNC, should also do VAR_PARTIAL.
+(Nikolai Pavlov, 2017 Mar 13, #1557)
+Make a function to check for function-like type?
+
 Screen updated delayed when using CTRL-O u in Insert mode.
 (Barlik, #1191)  Perhaps because status message?
 
-Patch to add buffer name argument to taglist().
-Ordering of tags in result of taglist call. (Duncan McDougall, #1194)
-
-Patch to fix that b_ind_has_comment is not correctly reset. (Christian
-Brabandt, 2017 Feb 14, closes #1475)
+Implement optional arguments for functions.
+    func Foo(start, count = 1 all = 1)
+    call Foo(12)
+    call Foo(12, all = 0)
+    call Foo(12, 15, 0)
 
 writefile() does not abort as soon as an error is found. (Nikolai Pavlov,
 2017 Feb 14, #1476)
@@ -224,6 +263,10 @@ writefile() does not abort as soon as an error is found. (Nikolai Pavlov,
 Patch to support on-the-spot and over-the-spot input method. (Ken Takata, 2017
 Feb 14).
 
+Change the Farsi code to work with UTF-8.  Possibly combined with the Arabic
+support, or similar.
+Invalid read error in Farsi mode. (Dominique Pelle, 2009 Aug 2)
+
 Add a command to take a range of lines, filter them and put the output
 somewhere else.  :{range}copy {dest} !cmd
 
@@ -236,6 +279,9 @@ Patch for restoring wide characters in the console buffer.
 Patch to fix escaping of job arguments. (Yasuhiro Matsumoto, 2016 Oct 5)
 Update Oct 14: https://gist.github.com/mattn/d47e7d3bfe5ade4be86062b565a4bfca
 
+Characters deleted on completion. (Adrià Farrés, 2017 Apr 20, #1645)
+Remarks from Christian Brabandt (Apr 21)
+
 The TermResponse event is not triggered when a plugin has set 'eventignore' to
 "all".  Netrw does this. (Gary Johnson, 2017 Jan 24)
 Postpone the event until 'eventignore' is reset.
@@ -243,6 +289,8 @@ Postpone the event until 'eventignore' is reset.
 Patch to make urxvt mouse work better, recognize Esc[*M termcap code.
 (Maurice Bos, 2017 Feb 17, #1486)
 
+Expanding /**/ is slow.  Idea by Luc Hermitte, 2017 Apr 14.
+
 Once .exe with updated installer is available: Add remark to download page
 about /S and /D options (Ken Takata, 2016 Apr 13)
 Or point to nightly builds: https://github.com/vim/vim-win32-installer/releases
@@ -255,24 +303,35 @@ MS-Windows.  Perhaps in \#  the \ is seen as a path separator. (Axel Bender,
 2017 Feb 9)  Can we expand wildcards first and send the path literally to the
 receiving Vim?  Or make an exception for #, it's not useful remotely.
 
+":sbr" docs state it respect 'switchbuf', but "vsplit" does not cause a
+vertical split. (Haldean Brown, 2017 Mar 1)
+
 Use ADDR_OTHER instead of ADDR_LINES for many more commands.
 Add tests for using number larger than number of lines in buffer.
 
+Might be useful to have isreadonly(), like we have islocked().
+Avoids exceptions, e.g. when using the b: namespace as a dict.
+
 Patch to make v:shell_error writable. (Christian Brabandt, 2016 Sep 27)
 Useful to restore it.  Is there another solution?
 
 "ci[" does not look for next [ like ci" does look for next ".
 (J.F. 2017 Jan 7)
 
-On MS-Windows with 'clipboard' set to "unnamed" this doesn't work to double
-lines: :g/^/normal yyp   On Unix it works OK.  (Bryce Orgill, 2016 Nov 5)
-
 Patch for wrong cursor position on wrapped line, involving breakindent.
 (Ozaki Kiichi, 2016 Nov 25)
 Does this also fix #1408 ?
 
+Patch to add "module" to quickfix entries. (Coot, 2017 Jun 8, #1757)
+
 Patch for 'cursorlinenr' option. (Ozaki Kiichi, 2016 Nov 30)
 
+When 'completeopt' has "noselect" does not insert a newline. (Lifepillar, 2017
+Apr 23, #1653)
+
+Window resizing with 'winfixheight': With a vertical split the height changes
+anyway. (Tommy allen, 2017 Feb 21, #1502)
+
 When adding an item to a new quickfix list make ":cnext" jump to that item.
 Make a difference being at the first item and not having used :cnext at all.
 (Afanasiy Fet, 2017 Jan 3)
@@ -285,9 +344,6 @@ Patch to make it possible to extend a list with itself.
 
 Patch to add Zstandard compressed file support. (Nick Terrell, 2016 Oct 24)
 
-Patch to add new regexp classes :ident:, :keyword:, :fname:.
-(ichizok, 2016 Jan 12, #1373)
-
 Patch to add trim() function. (Bukn, 2016 Nov 25, #1280)
 
 Patch to add MODIFIED_BY to MSVC build file. (Chen Lei, 2016 Nov 24, #1275)
@@ -317,11 +373,21 @@ Patch to add "cmdline" completion to getcompletion(). (Shougo, Oct 1, #1140)
 Feature request: Complete members of a dictionary. (Luc Hermitte, 2017 Jan 4,
 #1350)
 
+Undo message is not always properly displayed.  Patch by Ken Takata, 2013 oct
+3.  Doesn't work properly according to Yukihiro Nakadaira.
+Also see #1635.
+
 Patch for systemlist(), add empty item. (thinca, Sep 30, #1135)
 Add an argument to choose binary or non-binary (like readfile()), when omitted
 use the current behavior.
 Include the test.
 
+Patch to add tagfunc().  Cleaned up by Christian Brabandt, 2013 Jun 22.
+New update 2017 Apr 10, #1628
+
+Unnamed register only contains the last deleted text when appending deleted
+text to a register. (Wolfgang Jeltsch, reproduced by Ben Fritz, 2017 Apr 10)
+
 When 'keywordprg' starts with ":" the argument is still escaped as a shell
 command argument. (Romain Lafourcade, 2016 Oct 16, #1175)
 
@@ -367,30 +433,20 @@ Jul 25, #948)
 Patch to fix wrong encoding of error message on Cygwin/MSYS terminal.
 (Ken Takata, 2016 Oct 4)
 
-Patch to introduce 'cmdencoding'. (Ken Takata, Aug 18?)
-Better help Aug 19.
-Problem: applies to too many commands, such as :cbuffer.
-Updated patch with three options, 2016 Sep 8.
-    Win32: When running ":make" and 'encoding' differs from the system locale,
-    the output should be converted.  Esp. when 'encoding' is "utf-8". (Yongwei
-    Wu) Should we use 'termencoding' for this?
-
 Patch to add 'systemencoding', convert between 'encoding' and this for file
 names, shell commands and the like.  (Kikuchan, 2010 Oct 14)
 Assume the system converts between the actual encoding of the filesystem to
 the system encoding (usually utf-8).
 
-'hlsearch' interferes with a Conceal match. (Rom Grk, 2016 Aug 9)
+Using ":tab drop file" does not trigger BufEnter or TabEnter events.
+(Andy Stewart, 2017 Apr 27, #1660)
+Autocommands blocked in do_arg_all().  Supposed to happen later?
 
-Patch to add context information to quickfix/location list. (Yegappan
-Lakshmanan, 2016 Aug 25, #1012)
+'hlsearch' interferes with a Conceal match. (Rom Grk, 2016 Aug 9)
 
 MS-Windows: use WS_HIDE instead of SW_SHOWMINNOACTIVE in os_win32.c?
 Otherwise task flickers in taskbar.
 
-Bogus characters inserted when triggering indent while changing test.
-(Vitor Antunes, 2016 Nov 22, #1269)
-
 Should make ":@r" handle line continuation. (Cesar Romani, 2016 Jun 26)
 Also for ":@.".
 
@@ -410,9 +466,6 @@ This does not work: :set cscopequickfix=a-
 
 Possibly wrong value for seq_cur. (Florent Fayolle, 2016 May 15, #806)
 
-Patch to add separate highlighting for quickfix current line.
-(anishsane, 2016 Sep 16, #1080)
-
 Filetype plugin for awk. (Doug Kearns, 2016 Sep 5)
 
 Patch to improve map documentation. Issue #799.
@@ -447,7 +500,10 @@ When doing "vi buf.md" a BufNew autocommand for *.md is not triggered.
 Because of using the initial buffer? (Dun Peal, 2016 May 12)
 
 Patch to add the :bvimgrep command.  (Christian Brabandt, 2014 Nov 12)
-Updated 2016 Jun 10, #858
+Updated 2016 Jun 10, #858  Update 2017 Mar 28: use <buffer>
+
+Patch to fix that an encoding conversion failure results in a corrupted or
+empty file. (Christian Brabandt, #1765, https://github.com/chrisbra/vim-mq-patches/blob/master/conversion_error)
 
 Add redrawtabline command. (Naruhiko Nishino, 2016 Jun 11)
 
@@ -457,10 +513,15 @@ No test, needs some work to include.
 Patch to improve indenting for C++ constructor with initializer list.
 (Hirohito Higashi, 2016 Mar 31)
 
+Zero-out krypt key information when no longer in use. (Ben Fritz, 2017 May 15)
+
 Add stronger encryption.  Could use libsodium (NaCl).
 https://github.com/jedisct1/libsodium/
 Possibly include the needed code so that it can be build everywhere.
 
+Add a way to restart a timer.  It's similar to timer_stop() and timer_start(),
+but the reference remains valid.
+
 Patch to add setbufline(). (email from Yasuhiro Matsumoto, patch by Ozaki
 Kiichi, 2016 Feb 28)
 Update Mar 8: https://gist.github.com/mattn/23c1f50999084992ca98
@@ -503,10 +564,6 @@ When command names are very long :command output is difficult to read.  Use a
 maximum for the column width?  (#871)
 Patcy by varmanishant, 2016 Jun 18, #876
 
-Patch to change GUI behavior: instead of changing the window size change the
-lines/columns when menu/toolbar/etc. is added/removed. (Ychin, 2016 Mar 20,
-#703)
-
 Installation of .desktop files does not work everywhere.
 It's now fixed, but the target directory probably isn't right.
 Add configure check?
@@ -625,7 +682,8 @@ Value of virtcol() for '[ and '] depend on multi-byte character.
 (Luchr, #277)
 
 Can we cache the syntax attributes, so that updates for 'relativenumber' and
-'cursorline'/'cursorcolumn' are a lot faster?
+'cursorline'/'cursorcolumn' are a lot faster?  Thus store the attributes
+before combining them.
 
 C highlighting: modern C allows: /* comment */ #ifdef
 and also line continuation after #include.
@@ -940,11 +998,6 @@ Patch to handle integer overflow. (Aaron Burrow, 2013 Dec 12)
 Patch to add "ntab" item in 'listchars' to repeat first character. (Nathaniel
 Braun, pragm, 2013 Oct 13)  A better solution 2014 Mar 5.
 
-Undo message is not always properly displayed.  Patch by Ken Takata, 2013 oct
-3.  Doesn't work properly according to Yukihiro Nakadaira.
-
-/[b-a] gives error E16, should probably be E769.
-
 7   Windows XP: When using "ClearType" for text smoothing, a column of yellow
     pixels remains when typing spaces in front of a "D" ('guifont' set to
     "lucida_console:h8").
@@ -1082,6 +1135,9 @@ Patch for :tabcloseleft, after closing a tab go to left tab. (William Bowers,
 Patch to improve equivalence classes in regexp patterns.
 (Christian Brabandt, 2013 Jan 16, update Jan 17)
 
+Patch to add new regexp classes :ident:, :keyword:, :fname:.
+(ichizok, 2016 Jan 12, #1373)
+
 Patch with suggestions for starting.txt. (Tony Mechelynck, 2012 Oct 24)
 But use Gnome instead of GTK?
 
@@ -1104,8 +1160,6 @@ MS-Windows resizing problems:
 Patch to append regexp to tag commands to make it possible to select one out
 of many matches. (Cody Cutler, 2013 Mar 28)
 
-Patch to add tagfunc().  Cleaned up by Christian Brabandt, 2013 Jun 22.
-
 The input map for CTRL-O in mswin.vim causes problems after CTRL-X CTRL-O.
 Suggestion for another map. (Philip Mat, 2012 Jun 18)
 But use "gi" instead of "a".  Or use CTRL-\ CTRL-O.
@@ -1531,8 +1585,6 @@ When a:base in 'completefunc' starts with a number it's passed as a number,
 not a string. (Sean Ma)  Need to add flag to call_func_retlist() to force a
 string value.
 
-Invalid read error in Farsi mode. (Dominique Pelle, 2009 Aug 2)
-
 For running gvim on a USB stick: avoid the OLE registration.  Use a command
 line argument -noregister.
 

runtime/doc/usr_02.txt

@@ -1,4 +1,4 @@
-*usr_02.txt*	For Vim version 8.0.  Last change: 2016 Jan 16
+*usr_02.txt*	For Vim version 8.0.  Last change: 2017 Mar 14
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -554,7 +554,7 @@ Summary: 					*help-summary*  >
 8) Ex-commands always start with ":", so to go to the :s command help: >
 	:help :s
 
-9) Commands specifically for debugging start with ">".  To go to to the help
+9) Commands specifically for debugging start with ">".  To go to the help
    for the "cont" debug command: >
 	:help >cont
 
@@ -589,7 +589,7 @@ Summary: 					*help-summary*  >
     register: >
    	:help quote:
 
-13) Vim Script (VimL) is available at >
+13) Vim script is available at >
 	:help eval.txt
 <   Certain aspects of the language are available at :h expr-X where "X" is a
    single letter. E.g.  >
@@ -599,10 +599,10 @@ Summary: 					*help-summary*  >
    Also important is >
    	:help function-list
 <   to find a short description of all functions available.  Help topics for
-   VimL functions always include the "()", so: >
+   Vim script functions always include the "()", so: >
    	:help append()
-<   talks about the append VimL function rather than how to append text in the
-   current buffer.
+<   talks about the append Vim script function rather than how to append text
+   in the current buffer.
 
 14) Mappings are talked about in the help page :h |map.txt|. Use >
     	:help mapmode-i
@@ -663,7 +663,7 @@ Summary: 					*help-summary*  >
 22) Autocommand events can be found by their name: >
      	:help BufWinLeave
 <    To see all possible events: >
-	:help autocommands-events
+	:help autocommand-events
 
 23) Command-line switches always start with "-".  So for the help of the -f
     command switch of Vim use: >

runtime/doc/usr_09.txt

@@ -191,7 +191,7 @@ mouse button.  The selected text will be inserted.
 The "current selection" will only remain valid until some other text is
 selected.  After doing the paste in the other gVim, now select some characters
 in that window.  You will notice that the words that were previously selected
-in the other gVim window are displayed differently.  This means that it no
+in the other gvim window are displayed differently.  This means that it no
 longer is the current selection.
 
 You don't need to select text with the mouse, using the keyboard commands for
@@ -215,7 +215,7 @@ USING BOTH
 
 This use of both the "current selection" and the "real clipboard" might sound
 a bit confusing.  But it is very useful.  Let's show this with an example.
-Use one gVim with a text file and perform these actions:
+Use one gvim with a text file and perform these actions:
 
 -  Select two words in Visual mode.
 -  Use the Edit/Copy menu to get these words onto the clipboard.

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 8.0.  Last change: 2016 Nov 29
+*usr_41.txt*	For Vim version 8.0.  Last change: 2017 Mar 28
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -95,7 +95,7 @@ Then there is the ":let i += 1" command.  This does the same thing as
 to the same variable.
 
 The example was given to explain the commands, but would you really want to
-make such a loop it can be written much more compact: >
+make such a loop, it can be written much more compact: >
 
 	:for i in range(1, 4)
 	:  echo "count is" i
@@ -693,6 +693,7 @@ Other computation:					*bitwise-function*
 Variables:						*var-functions*
 	type()			type of a variable
 	islocked()		check if a variable is locked
+	funcref()		get a Funcref for a function reference
 	function()		get a Funcref for a function name
 	getbufvar()		get a variable value from a specific buffer
 	setbufvar()		set a variable in a specific buffer
@@ -884,9 +885,11 @@ GUI:						*gui-functions*
 	getfontname()		get name of current font being used
 	getwinposx()		X position of the GUI Vim window
 	getwinposy()		Y position of the GUI Vim window
+	balloon_show()		set the balloon content
 
 Vim server:					*server-functions*
 	serverlist()		return the list of server names
+	remote_startserve()	run a server
 	remote_send()		send command characters to a Vim server
 	remote_expr()		evaluate an expression in a Vim server
 	server2client()		send a reply to a client of a Vim server
@@ -918,16 +921,19 @@ Testing:				    *test-functions*
 	assert_true()		assert that an expression is true
 	assert_exception()	assert that a command throws an exception
 	assert_fails()		assert that a function call fails
+	assert_report()		report a test failure
 	test_alloc_fail()	make memory allocation fail
 	test_autochdir()	enable 'autochdir' during startup
-	test_disable_char_avail()	test without typeahead
-	test_garbagecollect_now()	free memory right now
+	test_override()		test with Vim internal overrides
+	test_garbagecollect_now()   free memory right now
+	test_ignore_error()	ignore a specific error message
 	test_null_channel()	return a null Channel
 	test_null_dict()	return a null Dict
 	test_null_job()		return a null Job
 	test_null_list()	return a null List
 	test_null_partial()	return a null Partial function
 	test_null_string()	return a null String
+	test_settime()		set the time Vim uses internally
 
 Inter-process communication:		    *channel-functions*
 	ch_canread()		check if there is something to read
@@ -1588,7 +1594,7 @@ WHITE SPACE
 Blank lines are allowed and ignored.
 
 Leading whitespace characters (blanks and TABs) are always ignored.  The
-whitespaces between parameters (e.g. between the 'set' and the 'cpoptions' in
+whitespaces between parameters (e.g. between the "set" and the "cpoptions" in
 the example below) are reduced to one blank character and plays the role of a
 separator, the whitespaces after the last (visible) character may or may not
 be ignored depending on the situation, see below.
@@ -2271,8 +2277,8 @@ plugin for the mail filetype: >
 	endif
 
 Two global variables are used:
-no_plugin_maps		disables mappings for all filetype plugins
-no_mail_maps		disables mappings for a specific filetype
+|no_plugin_maps|	disables mappings for all filetype plugins
+|no_mail_maps|		disables mappings for the "mail" filetype
 
 
 USER COMMANDS

runtime/doc/usr_44.txt

@@ -1,4 +1,4 @@
-*usr_44.txt*	For Vim version 8.0.  Last change: 2008 Dec 28
+*usr_44.txt*	For Vim version 8.0.  Last change: 2017 May 06
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -686,7 +686,7 @@ that included files do this too, you might have to reset "b:current_syntax" if
 you include two files.
 
 If you want your syntax file to work with Vim 5.x, add a check for v:version.
-See yacc.vim for an example.
+Find an syntax file in the Vim 7.2 distribution for an example.
 
 Do not include anything that is a user preference.  Don't set 'tabstop',
 'expandtab', etc.  These belong in a filetype plugin.

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 8.0.  Last change: 2016 Sep 06
+*various.txt*   For Vim version 8.0.  Last change: 2017 Feb 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -527,12 +527,14 @@ N  *+X11*		Unix only: can restore window title |X11|
 :redi[r] END		End redirecting messages.  {not in Vi}
 
 							*:filt* *:filter*
-:filt[er] {pat} {command}
-:filt[er] /{pat}/ {command}
-			Restrict the output of {command} to matches with {pat}.
-			For example, to list only xml files: >
+:filt[er][!] {pat} {command}
+:filt[er][!] /{pat}/ {command}
+			Restrict the output of {command} to lines matching
+			with {pat}.  For example, to list only xml files: >
 				:filter /\.xml$/ oldfiles
-<
+<			If the [!] is given, restrict the output of {command}
+			to lines that do NOT match {pat}.
+
 			{pat} is a Vim search pattern.  Instead of enclosing
 			it in / any non-ID character (see |'isident'|) can be
 			used, so long as it does not appear in {pat}.  Without
@@ -634,7 +636,7 @@ K			Run a program to lookup the keyword under the
 			with the command >
 				:!{program} {keyword}
 <			There is an example of a program to use in the tools
-			directory of Vim.  It is called 'ref' and does a
+			directory of Vim.  It is called "ref" and does a
 			simple spelling check.
 			Special cases:
 			- If 'keywordprg' begins with ":" it is invoked as

runtime/doc/version6.txt

@@ -9250,7 +9250,7 @@ Files:	    runtime/doc/various.txt, src/ex_cmds.h, src/ex_docmd.c,
 	    src/proto/quickfix.pro, src/quickfix.c
 
 Patch 6.1.424 (extra)
-Problem:    Win32: Gvim compiled with VC++ 7.0 run on Windows 95 does not show
+Problem:    Win32: gvim compiled with VC++ 7.0 run on Windows 95 does not show
 	    menu items.
 Solution:   Define $WINVER to avoid an extra item is added to MENUITEMINFO.
 	    (Muraoka Taro)
@@ -12319,7 +12319,7 @@ Solution:   Don't ignore the WM_SYSKEYUP event when the menu is disabled.
 Files:	    src/gui_w32.c
 
 Patch 6.2.362 (extra, after 6.2.347)
-Problem:    Win32: The manifest causes Gvim not to work. (Dave Roberts)
+Problem:    Win32: The manifest causes gvim not to work. (Dave Roberts)
 Solution:   Change "x86" to "X86". (Serge Pirotte)
 Files:	    src/gvim.exe.mnf
 

runtime/doc/version7.txt

@@ -4151,7 +4151,7 @@ Patch 7.0.173
 Problem:    ":call f().TT()" doesn't work.  (Richard Emberson)
 Solution:   When a function returns a Dictionary or another composite continue
 	    evaluating what follows.
-Files:	    src/eval.c    
+Files:	    src/eval.c
 
 Patch 7.0.174
 Problem:    ":mksession" doesn't restore window layout correctly in tab pages
@@ -4265,7 +4265,7 @@ Problem:    When 'swapfile' is switched off in an empty file it is possible
 	    that not all blocks are loaded into memory, causing ml_get errors
 	    later.
 Solution:   Rename "dont_release" to "mf_dont_release" and also use it to
-	    avoid using the cached line and locked block. 
+	    avoid using the cached line and locked block.
 Files:	    src/globals.h, src/memfile.c, src/memline.c
 
 Patch 7.0.193
@@ -6031,7 +6031,7 @@ Solution:   Add type casts. (Ben Schmidt)
 Files:	    src/version.c
 
 Patch 7.1.207
-Problem:    Netbeans: "remove" cannot delete one line. 
+Problem:    Netbeans: "remove" cannot delete one line.
 Solution:   Remove partial lines and whole lines properly.  Avoid a memory
 	    leak.  (Xavier de Gaye)
 Files:	    src/netbeans.c
@@ -7991,7 +7991,7 @@ Files:	    src/ex_cmds.c
 
 Patch 7.2.097
 Problem:    "!xterm&" doesn't work when 'shell' is "bash".
-Solution:   Ignore SIGHUP after calling setsid(). (Simon Schubert) 
+Solution:   Ignore SIGHUP after calling setsid(). (Simon Schubert)
 Files:	    src/os_unix.c
 
 Patch 7.2.098
@@ -8740,7 +8740,7 @@ Files:	    src/gui_gtk_x11.c, src/message.c, src/ops.c, src/proto/ui.pro,
 	    src/ui.c
 
 Patch 7.2.222
-Problem:   ":mksession" doesn't work properly with 'acd' set. 
+Problem:   ":mksession" doesn't work properly with 'acd' set.
 Solution:   Make it work. (Yakov Lerner)
 Files:	    src/ex_docmd.c
 
@@ -9150,7 +9150,7 @@ Solution:   Add the missing "else". (Lech Lorens)
 Files:	    src/ops.c
 
 Patch 7.2.293
-Problem:    When setting 'comments' option it may be used in a wrong way. 
+Problem:    When setting 'comments' option it may be used in a wrong way.
 Solution:   Don't increment after skipping over digits. (Yukihiro Nakadaira)
 Files:	    src/misc1.c
 
@@ -10191,32 +10191,32 @@ More information here: |two-engines|
 Better Python interface				*better-python-interface*
 -----------------------
 
-Added |python-bindeval| function. Unlike |python-eval| this one returns 
-|python-Dictionary|, |python-List| and |python-Function| objects for 
-dictionaries lists and functions respectively in place of their Python 
+Added |python-bindeval| function. Unlike |python-eval| this one returns
+|python-Dictionary|, |python-List| and |python-Function| objects for
+dictionaries lists and functions respectively in place of their Python
 built-in equivalents (or None if we are talking about function references).
-   For simple types this function returns Python built-in types and not only 
-Python `str()` like |python-eval| does. On Python 3 it will return `bytes()` 
+   For simple types this function returns Python built-in types and not only
+Python `str()` like |python-eval| does. On Python 3 it will return `bytes()`
 objects in place of `str()` ones avoiding possibility of UnicodeDecodeError.
    Interface of new objects mimics standard Python `dict()` and `list()`
 interfaces to some extent. Extent will be improved in the future.
 
-Added special |python-vars| objects also available for |python-buffer| and 
-|python-window|. They ease access to VimL variables from Python.
+Added special |python-vars| objects also available for |python-buffer| and
+|python-window|. They ease access to Vim script variables from Python.
 
-Now you no longer need to alter `sys.path` to import your module: special 
-hooks are responsible for importing from {rtp}/python2, {rtp}/python3 and 
-{rtp}/pythonx directories (for Python 2, Python 3 and both respectively). 
+Now you no longer need to alter `sys.path` to import your module: special
+hooks are responsible for importing from {rtp}/python2, {rtp}/python3 and
+{rtp}/pythonx directories (for Python 2, Python 3 and both respectively).
 See |python-special-path|.
 
 Added possibility to work with |tabpage|s through |python-tabpage| object.
 
-Added automatic conversion of Vim errors and exceptions to Python 
+Added automatic conversion of Vim errors and exceptions to Python
 exceptions.
 
-Changed the behavior of the |python-buffers| object: it now uses buffer numbers 
-as keys in place of the index of the buffer in the internal buffer list. 
-This should not break anything as the only way to get this index was 
+Changed the behavior of the |python-buffers| object: it now uses buffer numbers
+as keys in place of the index of the buffer in the internal buffer list.
+This should not break anything as the only way to get this index was
 iterating over |python-buffers|.
 
 Added |:pydo| and |:py3do| commands.
@@ -10226,7 +10226,7 @@ Added the |pyeval()| and |py3eval()| functions.
 Now in all places which previously accepted `str()` objects, `str()` and
 `unicode()` (Python 2) or `bytes()` and `str()` (Python 3) are accepted.
 
-|python-window| has gained `.col` and `.row` attributes that are currently 
+|python-window| has gained `.col` and `.row` attributes that are currently
 the only way to get internal window positions.
 
 Added or fixed support for `dir()` in Vim Python objects.
@@ -10235,12 +10235,12 @@ Added or fixed support for `dir()` in Vim Python objects.
 Changed							*changed-7.4*
 -------
 
-Old Python versions (≤2.2) are no longer supported. Building with them did 
+Old Python versions (≤2.2) are no longer supported. Building with them did
 not work anyway.
 
 Options:
-	Added ability to automatically save the selection into the system 
-	clipboard when using non-GUI version of Vim (autoselectplus in 
+	Added ability to automatically save the selection into the system
+	clipboard when using non-GUI version of Vim (autoselectplus in
 	'clipboard'). Also added ability to use the system clipboard as
 	default register (previously only primary selection could be used).
 	(Ivan Krasilnikov, Christian Brabandt, Bram Moolenaar)
@@ -10255,12 +10255,12 @@ Options:
 	'relativenumber'.  (Christian Brabandt)
 
 Commands:
-	|:diffoff| now saves the local values of some settings and restores 
-	them in place of blindly resetting them to the defaults. (Christian 
+	|:diffoff| now saves the local values of some settings and restores
+	them in place of blindly resetting them to the defaults. (Christian
 	Brabandt)
 
 Other:
-	Lua interface now also uses userdata binded to Vim structures. (Taro 
+	Lua interface now also uses userdata binded to Vim structures. (Taro
 	Muraoka, Luis Carvalho)
 
 	glob() and autocommand patterns used to work with the undocumented
@@ -10285,74 +10285,74 @@ Functions:
 
 	Added |wildmenumode()| function. (Christian Brabandt)
 
-	Debugging functions: |screenattr()|, |screenchar()|, |screencol()|, 
+	Debugging functions: |screenattr()|, |screenchar()|, |screencol()|,
 	|screenrow()|. (Simon Ruderich, Bram Moolenaar)
 
-	Added ability to use |Dictionary-function|s for |sort()|ing, via 
+	Added ability to use |Dictionary-function|s for |sort()|ing, via
 	optional third argument. (Nikolay Pavlov)
 
-	Added special |expand()| argument that expands to the current line 
+	Added special |expand()| argument that expands to the current line
 	number.
 
-	Made it possible to force |char2nr()| to always give unicode codepoints 
+	Made it possible to force |char2nr()| to always give unicode codepoints
 	regardless of current encoding. (Yasuhiro Matsumoto)
 
-	Made it possible for functions generating file list generate |List| 
-	and not NL-separated string. (e.g. |glob()|, |expand()|) (Christian 
+	Made it possible for functions generating file list generate |List|
+	and not NL-separated string. (e.g. |glob()|, |expand()|) (Christian
 	Brabandt)
 
-	Functions that obtain variables from the specific window, tabpage or 
-	buffer scope dictionary can now return specified default value in 
-	place of empty string in case variable is not found. (|gettabvar()|, 
+	Functions that obtain variables from the specific window, tabpage or
+	buffer scope dictionary can now return specified default value in
+	place of empty string in case variable is not found. (|gettabvar()|,
 	|getwinvar()|, |getbufvar()|) (Shougo Matsushita, Hirohito Higashi)
 
 Autocommands:
-	Added |InsertCharPre| event launched before inserting character. 
+	Added |InsertCharPre| event launched before inserting character.
 	(Jakson A. Aquino)
 
-	Added |CompleteDone| event launched after finishing completion in 
+	Added |CompleteDone| event launched after finishing completion in
 	insert mode. (idea by Florian Klein)
 
-	Added |QuitPre| event launched when commands that can either close Vim 
+	Added |QuitPre| event launched when commands that can either close Vim
 	or only some window(s) are launched.
 
-	Added |TextChanged| and |TextChangedI| events launched when text is 
+	Added |TextChanged| and |TextChangedI| events launched when text is
 	changed.
 
 Commands:
 	|:syntime| command useful for debugging.
 
-	Made it possible to remove all signs from the current buffer using 
+	Made it possible to remove all signs from the current buffer using
 	|:sign-unplace|. (Christian Brabandt)
 
 	Added |:language| autocompletion. (Dominique Pelle)
 
-	Added more |:command-complete| completion types: |:behave| suboptions, 
-	color schemes, compilers, |:cscope| suboptions, files from 'path', 
-	|:history| suboptions, locale names, |:syntime| suboptions, user 
+	Added more |:command-complete| completion types: |:behave| suboptions,
+	color schemes, compilers, |:cscope| suboptions, files from 'path',
+	|:history| suboptions, locale names, |:syntime| suboptions, user
 	names. (Dominique Pelle)
 
-	Added |:map-nowait| creating mapping which when having lhs that is the 
-	prefix of another mapping’s lhs will not allow Vim to wait for user to 
-	type more characters to resolve ambiguity, forcing Vim to take the 
+	Added |:map-nowait| creating mapping which when having lhs that is the
+	prefix of another mapping’s lhs will not allow Vim to wait for user to
+	type more characters to resolve ambiguity, forcing Vim to take the
 	shorter alternative: one with <nowait>.
 
 Options:
 	Made it possible to ignore case when completing: 'wildignorecase'.
 
-	Added ability to delete comment leader when using |J| by `j` flag in 
+	Added ability to delete comment leader when using |J| by `j` flag in
 	'formatoptions' (|fo-table|). (Lech Lorens)
 
-	Added ability to control indentation inside namespaces: |cino-N|. 
+	Added ability to control indentation inside namespaces: |cino-N|.
 	(Konstantin Lepa)
 
-	Added ability to control alignment inside `if` condition separately 
+	Added ability to control alignment inside `if` condition separately
 	from alignment inside function arguments: |cino-k|. (Lech Lorens)
 
 Other:
 	Improved support for cmd.exe. (Ben Fritz, Bram Moolenaar)
 
-	Added |v:windowid| variable containing current window number in GUI 
+	Added |v:windowid| variable containing current window number in GUI
 	Vim. (Christian J. Robinson, Lech Lorens)
 
 	Added rxvt-unicode and SGR mouse support. (Yiding Jia, Hayaki Saito)
@@ -11923,7 +11923,7 @@ Solution:   Pass the separator character to in_history(). (Taro Muraoka)
 Files:	    src/ex_getln.c
 
 Patch 7.3.266
-Problem:    In Gvim with iBus typing space in Insert mode doesn't work.
+Problem:    In gvim with iBus typing space in Insert mode doesn't work.
 Solution:   Clear xim_expected_char after checking it.
 Files:	    src/mbyte.c
 
@@ -11938,7 +11938,7 @@ Solution:   Use O_NOCTTY both in the master and slave. (Bjorn Winckler)
 Files:	    src/os_unix.c
 
 Patch 7.3.269
-Problem:    'shellcmdflag' only works with one flag. 
+Problem:    'shellcmdflag' only works with one flag.
 Solution:   Split into multiple arguments. (Gary Johnson)
 Files:	    src/os_unix.c
 
@@ -13118,7 +13118,7 @@ Files:	    src/ops.c
 Patch 7.3.477
 Problem:    Using ":echo" to output enough lines to scroll, then using "j" and
 	    "k" at the more prompt, displays the command on top of the output.
-	    (Marcin Szamotulski) 
+	    (Marcin Szamotulski)
 Solution:   Put the output below the command. (Christian Brabandt)
 Files:	    src/eval.c
 
@@ -13371,7 +13371,7 @@ Solution:   Recognize completefunction returning -3.  (Matsushita Shougo)
 Files:	    src/edit.c
 
 Patch 7.3.520
-Problem:    Gvim starts up slow on Ubuntu 12.04.
+Problem:    gvim starts up slow on Ubuntu 12.04.
 Solution:   Move the call to gui_mch_init_check() to after fork(). (Yasuhiro
 	    Matsumoto)  Do check $DISPLAY being set.
 Files:	    src/gui.c, src/gui_gtk_x11.c, src/proto/gui_gtk_x11.pro
@@ -13424,7 +13424,7 @@ Solution:   Make the count select that many characters or lines. (Christian
 Files:	    src/normal.c
 
 Patch 7.3.530 (after 7.3.520)
-Problem:    Gvim does not work when 'guioptions' includes "f". (Davido)
+Problem:    gvim does not work when 'guioptions' includes "f". (Davido)
 Solution:   Call gui_mch_init_check() when running GUI in the foreground.
 	    (Yasuhiro Matsumoto)
 Files:	    src/gui.c
@@ -14287,7 +14287,7 @@ Files:	    Filelist
 Patch 7.3.682 (after 7.3.677)
 Problem:    Compiler complains about incompatible types.
 Solution:   Remove type casts. (hint by Danek Duvall)
-Files:	    src/edit.c 
+Files:	    src/edit.c
 
 Patch 7.3.683
 Problem:    ":python" may crash when vimbindeval() returns None.
@@ -16340,7 +16340,7 @@ Solution:   Avoid negative argument to vim_strncpy(). (Narendran
 Files:	    src/if_cscope.c
 
 Patch 7.3.1039
-Problem:    New regexp engine does not support \%23c, \%<23c and the like. 
+Problem:    New regexp engine does not support \%23c, \%<23c and the like.
 Solution:   Implement them. (partly by Yasuhiro Matsumoto)
 Files:	    src/regexp.h, src/regexp_nfa.c, src/testdir/test64.in,
 	    src/testdir/test64.ok
@@ -17552,9 +17552,9 @@ Solution:   Specify a separate viminfo file.
 Files:	    src/testdir/test61.in
 
 Patch 7.3.1252
-Problem:    Gvim does not find the toolbar bitmap files in ~/vimfiles/bitmaps
+Problem:    gvim does not find the toolbar bitmap files in ~/vimfiles/bitmaps
 	    if the corresponding menu command contains additional characters
-	    like the shortcut marker '&' or if you use a non-english locale.  
+	    like the shortcut marker '&' or if you use a non-english locale.
 Solution:   Use menu->en_dname or menu->dname. (Martin Gieseking)
 Files:	    src/gui_w32.c
 
@@ -18175,7 +18175,7 @@ Files:	    src/window.c
 
 Patch 7.4a.045
 Problem:    Configure does not always find the right library for Lua.  Missing
-	    support for LuaJit. 
+	    support for LuaJit.
 Solution:   Improve the configure detection of Lua. (Hiroshi Shirosaki)
 Files:	    src/Makefile, src/configure.in, src/auto/configure
 

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Jan 06
+" Last Change:	2017 Jun 22
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -48,6 +48,9 @@ func! s:StarSetf(ft)
   endif
 endfunc
 
+" Vim help file
+au BufNewFile,BufRead $VIMRUNTIME/doc/*.txt	setf help
+
 " Abaqus or Trasys
 au BufNewFile,BufRead *.inp			call s:Check_inp()
 
@@ -288,7 +291,8 @@ au BufNewFile,BufRead *.bib			setf bib
 au BufNewFile,BufRead *.bst			setf bst
 
 " BIND configuration
-au BufNewFile,BufRead named.conf,rndc.conf	setf named
+" sudoedit uses namedXXXX.conf
+au BufNewFile,BufRead named*.conf,rndc*.conf	setf named
 
 " BIND zone
 au BufNewFile,BufRead named.root		setf bindzone
@@ -309,9 +313,10 @@ au BufNewFile,BufRead *.bl			setf blank
 au BufNewFile,BufRead */etc/blkid.tab,*/etc/blkid.tab.old   setf xml
 
 " Bazel (http://bazel.io)
-autocmd BufRead,BufNewFile *.bzl,WORKSPACE setfiletype bzl
+autocmd BufRead,BufNewFile *.bzl,WORKSPACE 	setf bzl
 if has("fname_case")
-  autocmd BufRead,BufNewFile BUILD setfiletype bzl
+  " There is another check for BUILD further below.
+  autocmd BufRead,BufNewFile BUILD		setf bzl
 endif
 
 " C or lpc
@@ -979,7 +984,7 @@ au BufNewFile,BufRead */etc/initng/*/*.i,*.ii	setf initng
 
 " Innovation Data Processing
 au BufRead,BufNewFile upstream.dat\c,upstream.*.dat\c,*.upstream.dat\c 	setf upstreamdat
-au BufRead,BufNewFile upstream.log\c,upstream.*.log\c,*.upstream.log\c 	setf upstreamlog
+au BufRead,BufNewFile fdrupstream.log,upstream.log\c,upstream.*.log\c,*.upstream.log\c,UPSTREAM-*.log\c 	setf upstreamlog
 au BufRead,BufNewFile upstreaminstall.log\c,upstreaminstall.*.log\c,*.upstreaminstall.log\c setf upstreaminstalllog
 au BufRead,BufNewFile usserver.log\c,usserver.*.log\c,*.usserver.log\c 	setf usserverlog
 au BufRead,BufNewFile usw2kagt.log\c,usw2kagt.*.log\c,*.usw2kagt.log\c 	setf usw2kagtlog
@@ -1179,14 +1184,21 @@ au BufNewFile,BufRead *.markdown,*.mdown,*.mkd,*.mkdn,*.mdwn,*.md  setf markdown
 " Mason
 au BufNewFile,BufRead *.mason,*.mhtml,*.comp	setf mason
 
-" Matlab or Objective C
+" Mathematica, Matlab, Murphi or Objective C
 au BufNewFile,BufRead *.m			call s:FTm()
 
 func! s:FTm()
   let n = 1
-  while n < 10
+  let saw_comment = 0 " Whether we've seen a multiline comment leader.
+  while n < 100
     let line = getline(n)
-    if line =~ '^\s*\(#\s*\(include\|import\)\>\|@import\>\|/\*\|//\)'
+    if line =~ '^\s*/\*'
+      " /* ... */ is a comment in Objective C and Murphi, so we can't conclude
+      " it's either of them yet, but track this as a hint in case we don't see
+      " anything more definitive.
+      let saw_comment = 1
+    endif
+    if line =~ '^\s*\(#\s*\(include\|import\)\>\|@import\>\|//\)'
       setf objc
       return
     endif
@@ -1198,11 +1210,23 @@ func! s:FTm()
       setf mma
       return
     endif
+    if line =~ '^\c\s*\(\(type\|var\)\>\|--\)'
+      setf murphi
+      return
+    endif
     let n = n + 1
   endwhile
-  if exists("g:filetype_m")
+
+  if saw_comment
+    " We didn't see anything definitive, but this looks like either Objective C
+    " or Murphi based on the comment leader. Assume the former as it is more
+    " common.
+    setf objc
+  elseif exists("g:filetype_m")
+    " Use user specified default filetype for .m
     exe "setf " . g:filetype_m
   else
+    " Default is matlab
     setf matlab
   endif
 endfunc
@@ -1366,6 +1390,9 @@ endfunc
 " Not Quite C
 au BufNewFile,BufRead *.nqc			setf nqc
 
+" NSE - Nmap Script Engine - uses Lua syntax
+au BufNewFile,BufRead *.nse			setf lua
+
 " NSIS
 au BufNewFile,BufRead *.nsi,*.nsh		setf nsis
 
@@ -1414,7 +1441,7 @@ if has("fname_case")
 else
   au BufNewFile,BufRead *.pl			call s:FTpl()
 endif
-au BufNewFile,BufRead *.plx,*.al		setf perl
+au BufNewFile,BufRead *.plx,*.al,*.psgi		setf perl
 au BufNewFile,BufRead *.p6,*.pm6,*.pl6		setf perl6
 
 func! s:FTpl()
@@ -1802,6 +1829,9 @@ au BufNewFile,BufRead *.sa			setf sather
 " Scala
 au BufNewFile,BufRead *.scala			setf scala
 
+" SBT - Scala Build Tool
+au BufNewFile,BufRead *.sbt			setf sbt
+
 " Scilab
 au BufNewFile,BufRead *.sci,*.sce		setf scilab
 
@@ -2128,7 +2158,10 @@ au BufNewFile,BufRead ssh_config,*/.ssh/config	setf sshconfig
 au BufNewFile,BufRead sshd_config		setf sshdconfig
 
 " Stata
-au BufNewFile,BufRead *.ado,*.class,*.do,*.imata,*.mata   setf stata
+au BufNewFile,BufRead *.ado,*.do,*.imata,*.mata	setf stata
+" Also *.class, but not when it's a Java bytecode file
+au BufNewFile,BufRead *.class
+	\ if getline(1) !~ "^\xca\xfe\xba\xbe" | setf stata | endif
 
 " SMCL
 au BufNewFile,BufRead *.hlp,*.ihlp,*.smcl	setf smcl
@@ -2223,6 +2256,8 @@ func! s:FTtex()
     let format = tolower(matchstr(firstline, '\a\+'))
     let format = substitute(format, 'pdf', '', '')
     if format == 'tex'
+      let format = 'latex'
+    elseif format == 'plaintex'
       let format = 'plain'
     endif
   else
@@ -2280,6 +2315,9 @@ au BufNewFile,BufRead .tidyrc,tidyrc		setf tidy
 " TF mud client
 au BufNewFile,BufRead *.tf,.tfrc,tfrc		setf tf
 
+" tmux configuration
+au BufNewFile,BufRead {.,}tmux*.conf		setf tmux
+
 " TPP - Text Presentation Program
 au BufNewFile,BufReadPost *.tpp			setf tpp
 
@@ -2595,6 +2633,11 @@ au BufNewFile,BufRead *asterisk*/*voicemail.conf* call s:StarSetf('asteriskvm')
 " Bazaar version control
 au BufNewFile,BufRead bzr_log.*			setf bzr
 
+" Bazel build file
+if !has("fname_case")
+  au BufNewFile,BufRead BUILD			setf bzl
+endif
+
 " BIND zone
 au BufNewFile,BufRead */named/db.*,*/bind/db.*	call s:StarSetf('bindzone')
 
@@ -2746,7 +2789,13 @@ au BufNewFile,BufRead zsh*,zlog*		call s:StarSetf('zsh')
 
 " Plain text files, needs to be far down to not override others.  This avoids
 " the "conf" type being used if there is a line starting with '#'.
-au BufNewFile,BufRead *.txt,*.text,README	setf text
+au BufNewFile,BufRead *.text,README		setf text
+
+" Help files match *.txt but should have a last line that is a modeline.
+au BufNewFile,BufRead *.txt	
+	\  if getline('$') !~ 'vim:.*ft=help'
+	\|   setf text
+	\| endif
 
 
 " Use the filetype detect plugins.  They may overrule any of the previously
@@ -2758,12 +2807,12 @@ runtime! ftdetect/*.vim
 " state.
 augroup END
 
-" Generic configuration file (check this last, it's just guessing!)
+" Generic configuration file. Use FALLBACK, it's just guessing!
 au filetypedetect BufNewFile,BufRead,StdinReadPost *
 	\ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat
 	\    && (getline(1) =~ '^#' || getline(2) =~ '^#' || getline(3) =~ '^#'
 	\	|| getline(4) =~ '^#' || getline(5) =~ '^#') |
-	\   setf conf |
+	\   setf FALLBACK conf |
 	\ endif
 
 

runtime/ftplugin/a2ps.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         a2ps(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             a2ps(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/alsaconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         alsaconf(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             alsaconf(8) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/arch.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         GNU Arch inventory file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             GNU Arch inventory file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/automake.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Automake
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Automake
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/bdf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         BDF font definition
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             BDF font definition
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/calendar.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         calendar(1) input file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             calendar(1) input file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/cdrdaoconf.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2007-12-04
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2007-12-04
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/conf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         generic configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             generic configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/crm.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         CRM114
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             CRM114
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/css.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         CSS
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             CSS
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/cvsrc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         cvs(1) RC file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             cvs(1) RC file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/denyhosts.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2007-12-04
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2007-12-04
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dictconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         dict(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             dict(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dictdconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         dictd(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             dictd(8) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dircolors.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         dircolors(1) input file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             dircolors(1) input file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dosini.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Configuration File (ini file) for MSDOS/MS Windows
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Configuration File (ini file) for MSDOS/MS Windows
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/elinks.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         elinks(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             elinks(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/eterm.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         eterm(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             eterm(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/fetchmail.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         fetchmail(1) RC File
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             fetchmail(1) RC File
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/framescript.vim

@@ -1,7 +1,7 @@
 " Vim ftplugin file
-" Language:         FrameScript
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-19
+" Language:             FrameScript
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-19
 
 let s:cpo_save = &cpo
 set cpo&vim

runtime/ftplugin/gpg.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         gpg(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             gpg(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/group.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         group(5) user group file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             group(5) user group file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/grub.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         grub(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             grub(8) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/hamster.vim

@@ -1,8 +1,8 @@
 " Vim filetype plugin
 " Language:    Hamster Script
 " Version:     2.0.6.0
-" Maintainer:  David Fishburn <fishburn@ianywhere.com>
-" Last Change: Wed Nov 08 2006 12:03:09 PM
+" Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
+" Last Change: 2017 Mar 18
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -13,7 +13,7 @@ endif
 let b:did_ftplugin = 1
 
 let s:cpo_save = &cpo
-set cpo-=C
+set cpo&vim
 
 let b:undo_ftplugin = "setl fo< com< tw< commentstring<"
 	\ . "| unlet! b:match_ignorecase b:match_words b:match_skip"

runtime/ftplugin/haskell.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Haskell
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Haskell
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/help.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Vim help file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Vim help file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/hostconf.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2007-12-04
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2007-12-04
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/hostsaccess.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         hosts_access(5) control file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             hosts_access(5) control file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/indent.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         indent(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             indent(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/ld.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         ld(1) script
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             ld(1) script
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish