patch 8.0.0497: arabic support is not fully tested

Problem:    Arabic support is not fully tested.
Solution:   Add more tests for the untested functions.  Comment out
            unreachable code.

.gitignore

@@ -78,6 +78,8 @@ src/testdir/test.log
 src/testdir/dostmp/*
 src/testdir/messages
 src/testdir/viminfo
+src/testdir/opt_test.vim
 src/memfile_test
 src/json_test
 src/message_test
+src/kword_test

.travis.yml

@@ -19,14 +19,12 @@ env:
   - BUILD=yes TEST=test COVERAGE=no FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
     "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
     # ASAN build
-  - BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -fsanitize=address -fno-omit-frame-pointer" FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no
+  - BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+    FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan"
     "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
 
 sudo: false
 
-git:
-  depth: 1
-
 # instead of a 2*2*8 matrix (2*os + 2*compiler + 8*env),
 # exclude some builds on mac os x and linux
 # linux: 2*compiler + 5*env + mac: 2*compiler + 2*env
@@ -42,11 +40,13 @@ matrix:
       env: BUILD=yes TEST=scripttests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
             "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp'"
     - os: osx
-      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -fsanitize=address -fno-omit-frame-pointer" FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no
+      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+            FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan"
             "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
     - os: linux
       compiler: gcc
-      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -fsanitize=address -fno-omit-frame-pointer" FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no
+      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+            FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan"
             "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
     - os: linux
       compiler: clang
@@ -92,7 +92,10 @@ script:
   - if [ "x$SHADOWOPT" != x ]; then make -C src shadow; fi
   - (cd ${SRCDIR} && ./configure --with-features=$FEATURES $CONFOPT --enable-fail-if-missing && if [ "$BUILD" = "yes" ]; then make -j$NPROC; fi)
   - if [ "$BUILD" = "yes" ]; then ${SRCDIR}/vim --version; fi
+  - if [ -n "$ASAN_OPTIONS" ]; then export PATH=/usr/lib/llvm-$(clang -v 2>&1 | sed -n 's/.*version \([1-9]\.[0-9][0-9]*\).*/\1/p')/bin:$PATH; fi
   - make $SHADOWOPT $TEST
+  - if [ -n "$ASAN_OPTIONS" ]; then for log in $(find -type f -name 'asan.*' -size +0); do cat "$log"; err=1; done; fi
+  - if [ -n "$err" ]; then exit 1; fi
 
 after_success:
   - if [ "$COVERAGE" = "yes" ]; then ~/.local/bin/coveralls -b $SRCDIR -x .xs -e ${SRCDIR}/xxd -e ${SRCDIR}/if_perl.c --encodings utf-8 latin-1 EUC-KR; fi

Filelist

@@ -45,6 +45,7 @@ SRC_ALL =	\
 		src/hashtab.c \
 		src/json.c \
 		src/json_test.c \
+		src/kword_test.c \
 		src/list.c \
 		src/keymap.h \
 		src/macros.h \
@@ -96,6 +97,7 @@ SRC_ALL =	\
 		src/tee/tee.c \
 		src/xxd/xxd.c \
 		src/main.aap \
+		src/testdir/gen_opt_test.vim \
 		src/testdir/main.aap \
 		src/testdir/README.txt \
 		src/testdir/Make_all.mak \
@@ -104,7 +106,11 @@ SRC_ALL =	\
 		src/testdir/sautest/autoload/*.vim \
 		src/testdir/runtest.vim \
 		src/testdir/shared.vim \
+		src/testdir/view_util.vim \
 		src/testdir/setup.vim \
+		src/testdir/gui_init.vim \
+		src/testdir/setup_gui.vim \
+		src/testdir/gui_preinit.vim \
 		src/testdir/test[0-9]*.ok \
 		src/testdir/test[0-9]*a.ok \
 		src/testdir/test_[a-z]*.ok \
@@ -122,6 +128,7 @@ SRC_ALL =	\
 		src/testdir/pythonx/topmodule/submodule/subsubmodule/subsubsubmodule.py \
 		src/testdir/python_after/*.py \
 		src/testdir/python_before/*.py \
+		src/testdir/pyxfile/*.py \
 		src/testdir/bench*.in \
 		src/testdir/bench*.vim \
 		src/testdir/samples/*.txt \

Makefile

@@ -120,8 +120,9 @@ MINOR = 0
 #
 # MS-Windows:
 # - Run make on Unix to update the ".mo" files.
-# - Get libintl-8.dll and libiconv-2.dll. E.g. from
+# - Get libintl-8.dll, libiconv-2.dll and libgcc_s_sjlj-1.dll. E.g. from
 #   https://mlocati.github.io/gettext-iconv-windows/ .
+#   Use the "shared-32.zip file and extract the archive to get the files.
 #   Put them in the top directory, "make dosrt" uses them.
 # - > make dossrc
 #   > make dosrt
@@ -468,6 +469,7 @@ dosrt_files: dist prepare no_title.vim
 	    done
 	cp libintl-8.dll dist/vim/$(VIMRTDIR)/
 	cp libiconv-2.dll dist/vim/$(VIMRTDIR)/
+	cp libgcc_s_sjlj-1.dll dist/vim/$(VIMRTDIR)/
 
 
 # Used before uploading.  Don't delete the AAPDIR/sign files!

nsis/gvim.nsi

@@ -385,6 +385,7 @@ SectionEnd
 		File ${VIMRT}\libintl-8.dll
 		File ${VIMRT}\libiconv-2.dll
 		File /nonfatal ${VIMRT}\libwinpthread-1.dll
+		File /nonfatal ${VIMRT}\libgcc_s_sjlj-1.dll
 	SectionEnd
 !endif
 

runtime/autoload/ada.vim

@@ -2,12 +2,13 @@
 "  Description: Perform Ada specific completion & tagging.
 "     Language: Ada (2005)
 "	   $Id: ada.vim 887 2008-07-08 14:29:01Z krischik $
-"   Maintainer: Martin Krischik <krischik@users.sourceforge.net>
+"   Maintainer: Mathias Brousset <mathiasb17@gmail.com>
+"		Martin Krischik <krischik@users.sourceforge.net>
 "		Taylor Venable <taylor@metasyntax.net>
 "		Neil Bird <neil@fnxweb.com>
 "		Ned Okie <nokie@radford.edu>
 "      $Author: krischik $
-"	 $Date: 2008-07-08 16:29:01 +0200 (Di, 08 Jul 2008) $
+"	 $Date: 2017-01-31 20:20:05 +0200 (Mon, 01 Jan 2017) $
 "      Version: 4.6
 "    $Revision: 887 $
 "     $HeadURL: https://gnuada.svn.sourceforge.net/svnroot/gnuada/trunk/tools/vim/autoload/ada.vim $
@@ -23,6 +24,7 @@
 "	        09.05.2007 MK Session just won't work no matter how much
 "			      tweaking is done
 "		19.09.2007 NO still some mapleader problems
+"		31.01.2017 MB fix more mapleader problems
 "    Help Page: ft-ada-functions
 "------------------------------------------------------------------------------
 
@@ -447,7 +449,7 @@ function ada#Switch_Session (New_Session)
 
       if a:New_Session != v:this_session
 	 "
-	 "  We actualy got a new session - otherwise there
+	 "  We actually got a new session - otherwise there
 	 "  is nothing to do.
 	 "
 	 if strlen (v:this_session) > 0
@@ -585,11 +587,11 @@ function ada#Map_Menu (Text, Keys, Command)
 	\ " :"	  . a:Command . "<CR>"
       execute
 	\ "nnoremap <buffer>" .
-	\ escape(l:leader . "a" . a:Keys , '\') .
+	\ " <Leader>a" . a:Keys .
 	\" :" . a:Command
       execute
 	\ "inoremap <buffer>" .
-	\ escape(l:leader . "a" . a:Keys , '\') .
+	\ " <Learder>a" . a:Keys .
 	\" <C-O>:" . a:Command
    endif
    return

runtime/autoload/javascriptcomplete.vim

@@ -1,7 +1,7 @@
 " Vim completion script
 " Language:	Java Script
 " Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change:	2006 Apr 30
+" Last Change:	2017 Mar 04
 
 function! javascriptcomplete#CompleteJS(findstart, base)
   if a:findstart
@@ -563,7 +563,7 @@ function! javascriptcomplete#CompleteJS(findstart, base)
 	for i in arguments
 		let g:ia = i
 		let f_elements = matchlist(i, 'function\s\+\(\k\+\)\s*(\(.\{-}\))')
-		if len(f_elements) == 3
+		if len(f_elements) >= 3
 			let b:js_menuinfo[f_elements[1].'('] = f_elements[2]
 		endif
 	endfor

runtime/compiler/bdf.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:         BDF to PCF Conversion
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2006-04-19
+" Compiler:             BDF to PCF Conversion
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2006-04-19
 
 if exists("current_compiler")
   finish

runtime/compiler/gcc.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:         GNU C Compiler
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2010-10-14
+" Compiler:             GNU C Compiler
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2010-10-14
 " 			added line suggested by Anton Lindqvist 2016 Mar 31
 
 if exists("current_compiler")

runtime/compiler/rst.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:         reStructuredText Documentation Format
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2006-04-19
+" Compiler:             reStructuredText Documentation Format
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2006-04-19
 
 if exists("current_compiler")
   finish

runtime/defaults.vim

@@ -1,7 +1,7 @@
 " The default vimrc file.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2016 Sep 02
+" Last change:	2017 Mar 08
 "
 " This is loaded if no vimrc file was found.
 " Except when Vim is run with "-u NONE" or "-C".
@@ -21,7 +21,10 @@ endif
 
 " Use Vim settings, rather than Vi settings (much better!).
 " This must be first, because it changes other options as a side effect.
-set nocompatible
+" Avoid side effects when it was already reset.
+if &compatible
+  set nocompatible
+endif
 
 " Allow backspacing over everything in insert mode.
 set backspace=indent,eol,start

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 8.0.  Last change: 2016 Nov 19
+*change.txt*    For Vim version 8.0.  Last change: 2017 Feb 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -635,12 +635,14 @@ For other systems the tmpnam() library function is used.
 			For the {pattern} see |pattern|.
 			{string} can be a literal string, or something
 			special; see |sub-replace-special|.
+							*E939*
 			When [range] and [count] are omitted, replace in the
-			current line only.
-			When [count] is given, replace in [count] lines,
-			starting with the last line in [range].  When [range]
-			is omitted start in the current line.
-			Also see |cmdline-ranges|.
+			current line only.  When [count] is given, replace in
+			[count] lines, starting with the last line in [range].
+			When [range] is omitted start in the current line.
+			[count] must be a positive number.  Also see
+			|cmdline-ranges|.
+
 			See |:s_flags| for [flags].
 
 :[range]s[ubstitute] [flags] [count]

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 8.0.  Last change: 2016 Aug 24
+*diff.txt*      For Vim version 8.0.  Last change: 2017 Feb 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -131,6 +131,8 @@ file for a moment and come back to the same file and be in diff mode again.
 		related options only happens in a window that has 'diff' set,
 		if the current window does not have 'diff' set then no options
 		in it are changed.
+		Hidden buffers are also removed from the list of diff'ed
+		buffers.
 
 The `:diffoff` command resets the relevant options to the values they had when
 using `:diffsplit`, `:diffpatch` , `:diffthis`. or starting Vim in diff mode.
@@ -164,7 +166,8 @@ The alignment of text will go wrong when:
 
 All the buffers edited in a window where the 'diff' option is set will join in
 the diff.  This is also possible for hidden buffers.  They must have been
-edited in a window first for this to be possible.
+edited in a window first for this to be possible.  To get rid of the hidden
+buffers use `:diffoff!`.
 
 					*:DiffOrig* *diff-original-file*
 Since 'diff' is a window-local option, it's possible to view the same buffer

runtime/doc/editing.txt

@@ -276,7 +276,7 @@ If you want to keep the changed buffer without saving it, switch on the
 
 							*:vie* *:view*
 :vie[w][!] [++opt] [+cmd] file
-			When used in Ex mode: Leave |Ex mode|, go back to
+			When used in Ex mode: Leave |Ex-mode|, go back to
 			Normal mode.  Otherwise same as |:edit|, but set
 			'readonly' option for this buffer.  {not in Vi}
 

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.0.  Last change: 2017 Jan 14
+*eval.txt*	For Vim version 8.0.  Last change: 2017 Mar 18
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1329,7 +1329,8 @@ b:changedtick	The total number of changes to the current buffer.  It is
 		    :	let my_changedtick = b:changedtick
 		    :	call My_Update()
 		    :endif
-<
+<		You cannot change or delete the b:changedtick variable.
+
 						*window-variable* *w:var* *w:*
 A variable name that is preceded with "w:" is local to the current window.  It
 is deleted when the window is closed.
@@ -1788,8 +1789,11 @@ v:progpath	Contains the command with which Vim was invoked, including the
 		|--remote-expr|.
 		To get the full path use: >
 			echo exepath(v:progpath)
-<		NOTE: This does not work when the command is a relative path
-		and the current directory has changed.
+<		If the path is relative it will be expanded to the full path,
+		so that it still works after `:cd`. Thus starting "./vim"
+		results in "/home/user/path/to/vim/src/vim".
+		On MS-Windows the executable may be called "vim.exe", but the
+		".exe" is not added to v:progpath.
 		Read-only.
 
 					*v:register* *register-variable*
@@ -1900,6 +1904,8 @@ v:termresponse	The escape sequence returned by the terminal for the |t_RV|
 
 					*v:testing* *testing-variable*
 v:testing	Must be set before using `test_garbagecollect_now()`.
+		Also, when set certain error messages won't be shown for 2
+		seconds. (e.g. "'dictionary' option is empty") 
 
 				*v:this_session* *this_session-variable*
 v:this_session	Full filename of the last loaded or saved session file.  See
@@ -1980,19 +1986,27 @@ argidx()			Number	current index in the argument list
 arglistid([{winnr} [, {tabnr}]]) Number	argument list id
 argv({nr})			String	{nr} entry of the argument list
 argv()				List	the argument list
-assert_equal({exp}, {act} [, {msg}])     none  assert {exp} is equal to {act}
-assert_exception({error} [, {msg}])      none  assert {error} is in v:exception
-assert_fails({cmd} [, {error}])          none  assert {cmd} fails
-assert_false({actual} [, {msg}])         none  assert {actual} is false
+assert_equal({exp}, {act} [, {msg}])
+				none	assert {exp} is equal to {act}
+assert_exception({error} [, {msg}])
+				none	assert {error} is in v:exception
+assert_fails({cmd} [, {error}])	none	assert {cmd} fails
+assert_false({actual} [, {msg}])
+				none	assert {actual} is false
 assert_inrange({lower}, {upper}, {actual} [, {msg}])
 				none	assert {actual} is inside the range
-assert_match({pat}, {text} [, {msg}])    none  assert {pat} matches {text}
-assert_notequal({exp}, {act} [, {msg}])  none  assert {exp} is not equal {act}
-assert_notmatch({pat}, {text} [, {msg}]) none  assert {pat} not matches {text}
-assert_true({actual} [, {msg}])          none  assert {actual} is true
+assert_match({pat}, {text} [, {msg}])
+				none	assert {pat} matches {text}
+assert_notequal({exp}, {act} [, {msg}])
+				none	assert {exp} is not equal {act}
+assert_notmatch({pat}, {text} [, {msg}])
+				none	assert {pat} not matches {text}
+assert_report({msg})		none	report a test failure
+assert_true({actual} [, {msg}])	none	assert {actual} is true
 asin({expr})			Float	arc sine of {expr}
 atan({expr})			Float	arc tangent of {expr}
 atan2({expr1}, {expr2})		Float	arc tangent of {expr1} / {expr2}
+balloon_show({msg})		none	show {msg} inside the balloon
 browse({save}, {title}, {initdir}, {default})
 				String	put up a file requester
 browsedir({title}, {initdir})	String	put up a directory requester
@@ -2222,8 +2236,8 @@ matchstr({expr}, {pat}[, {start}[, {count}]])
 				String	{count}'th match of {pat} in {expr}
 matchstrpos({expr}, {pat}[, {start}[, {count}]])
 				List	{count}'th match of {pat} in {expr}
-max({list})			Number	maximum value of items in {list}
-min({list})			Number	minimum value of items in {list}
+max({expr})			Number	maximum value of items in {expr}
+min({expr})			Number	minimum value of items in {expr}
 mkdir({name} [, {path} [, {prot}]])
 				Number	create directory {name}
 mode([expr])			String	current editing mode
@@ -2239,6 +2253,7 @@ printf({fmt}, {expr1}...)	String	format text
 pumvisible()			Number	whether popup menu is visible
 pyeval({expr})			any	evaluate |Python| expression
 py3eval({expr})			any	evaluate |python3| expression
+pyxeval({expr})			any	evaluate |python_x| expression
 range({expr} [, {max} [, {stride}]])
 				List	items from {expr} to {max}
 readfile({fname} [, {binary} [, {max}]])
@@ -2254,6 +2269,8 @@ remote_peek({serverid} [, {retvar}])
 remote_read({serverid})		String	read reply string
 remote_send({server}, {string} [, {idvar}])
 				String	send key sequence
+remote_startserver({name})	none	become server {name}
+				String	send key sequence
 remove({list}, {idx} [, {end}])	any	remove items {idx}-{end} from {list}
 remove({dict}, {key})		any	remove entry {key} from {dict}
 rename({from}, {to})		Number	rename (move) file from {from} to {to}
@@ -2354,14 +2371,15 @@ tempname()			String	name for a temporary file
 test_alloc_fail({id}, {countdown}, {repeat})
 				none	make memory allocation fail
 test_autochdir()		none	enable 'autochdir' during startup
-test_disable_char_avail({expr}) none	test without typeahead
 test_garbagecollect_now()	none	free memory right now for testing
+test_ignore_error({expr})	none	ignore a specific error
 test_null_channel()		Channel	null value for testing
 test_null_dict()		Dict	null value for testing
 test_null_job()			Job	null value for testing
 test_null_list()		List	null value for testing
 test_null_partial()		Funcref	null value for testing
 test_null_string()		String	null value for testing
+test_override({expr}, {val})    none	test with Vim internal overrides
 test_settime({expr})		none	set current time for testing
 timer_info([{id}])		List	information about timers
 timer_pause({id}, {pause})	none	pause or unpause a timer
@@ -2572,7 +2590,10 @@ assert_notmatch({pattern}, {actual} [, {msg}])
 		The opposite of `assert_match()`: add an error message to
 		|v:errors| when {pattern} matches {actual}.
 
-assert_true({actual} [, {msg}])					*assert_true()*
+assert_report({msg})					*assert_report()*
+		Report a test failure directly, using {msg}.
+
+assert_true({actual} [, {msg}])				*assert_true()*
 		When {actual} is not true an error message is added to
 		|v:errors|, like with |assert_equal()|.
 		A value is TRUE when it is a non-zero number.  When {actual}
@@ -2616,6 +2637,28 @@ atan2({expr1}, {expr2})					*atan2()*
 <			2.356194
 		{only available when compiled with the |+float| feature}
 
+balloon_show({msg})					*balloon_show()*
+		Show {msg} inside the balloon.
+		Example: >
+			func GetBalloonContent()
+			   " initiate getting the content
+			   return ''
+			endfunc
+			set balloonexpr=GetBalloonContent()
+
+			func BalloonCallback(result)
+			  call balloon_show(a:result)
+			endfunc
+<
+		The intended use is that fetching the content of the balloon
+		is initiated from 'balloonexpr'.  It will invoke an
+		asynchronous method, in which a callback invokes
+		balloon_show().  The 'balloonexpr' itself can return an
+		empty string or a placeholder.
+
+		When showing a balloon is not possible nothing happens, no
+		error message.
+		{only available when compiled with the +balloon_eval feature}
 
 							*browse()*
 browse({save}, {title}, {initdir}, {default})
@@ -2811,176 +2854,6 @@ ceil({expr})							*ceil()*
 <			4.0
 		{only available when compiled with the |+float| feature}
 
-changenr()						*changenr()*
-		Return the number of the most recent change.  This is the same
-		number as what is displayed with |:undolist| and can be used
-		with the |:undo| command.
-		When a change was made it is the number of that change.  After
-		redo it is the number of the redone change.  After undo it is
-		one less than the number of the undone change.
-
-char2nr({expr}[, {utf8}])					*char2nr()*
-		Return number value of the first char in {expr}.  Examples: >
-			char2nr(" ")		returns 32
-			char2nr("ABC")		returns 65
-<		When {utf8} is omitted or zero, the current 'encoding' is used.
-		Example for "utf-8": >
-			char2nr("<22>")		returns 225
-			char2nr("<22>"[0])		returns 195
-<		With {utf8} set to 1, always treat as utf-8 characters.
-		A combining character is a separate character.
-		|nr2char()| does the opposite.
-
-cindent({lnum})						*cindent()*
-		Get the amount of indent for line {lnum} according the C
-		indenting rules, as with 'cindent'.
-		The indent is counted in spaces, the value of 'tabstop' is
-		relevant.  {lnum} is used just like in |getline()|.
-		When {lnum} is invalid or Vim was not compiled the |+cindent|
-		feature, -1 is returned.
-		See |C-indenting|.
-
-clearmatches()						*clearmatches()*
-		Clears all matches previously defined by |matchadd()| and the
-		|:match| commands.
-
-							*col()*
-col({expr})	The result is a Number, which is the byte index of the column
-		position given with {expr}.  The accepted positions are:
-		    .	    the cursor position
-		    $	    the end of the cursor line (the result is the
-			    number of bytes in the cursor line plus one)
-		    'x	    position of mark x (if the mark is not set, 0 is
-			    returned)
-		    v       In Visual mode: the start of the Visual area (the
-			    cursor is the end).  When not in Visual mode
-			    returns the cursor position.  Differs from |'<| in
-			    that it's updated right away.
-		Additionally {expr} can be [lnum, col]: a |List| with the line
-		and column number. Most useful when the column is "$", to get
-		the last column of a specific line.  When "lnum" or "col" is
-		out of range then col() returns zero.
-		To get the line number use |line()|.  To get both use
-		|getpos()|.
-		For the screen column position use |virtcol()|.
-		Note that only marks in the current file can be used.
-		Examples: >
-			col(".")		column of cursor
-			col("$")		length of cursor line plus one
-			col("'t")		column of mark t
-			col("'" . markname)	column of mark markname
-<		The first column is 1.  0 is returned for an error.
-		For an uppercase mark the column may actually be in another
-		buffer.
-		For the cursor position, when 'virtualedit' is active, the
-		column is one higher if the cursor is after the end of the
-		line.  This can be used to obtain the column in Insert mode: >
-			:imap <F2> <C-O>:let save_ve = &ve<CR>
-				\<C-O>:set ve=all<CR>
-				\<C-O>:echo col(".") . "\n" <Bar>
-				\let &ve = save_ve<CR>
-<
-
-complete({startcol}, {matches})			*complete()* *E785*
-		Set the matches for Insert mode completion.
-		Can only be used in Insert mode.  You need to use a mapping
-		with CTRL-R = (see |i_CTRL-R|).  It does not work after CTRL-O
-		or with an expression mapping.
-		{startcol} is the byte offset in the line where the completed
-		text start.  The text up to the cursor is the original text
-		that will be replaced by the matches.  Use col('.') for an
-		empty string.  "col('.') - 1" will replace one character by a
-		match.
-		{matches} must be a |List|.  Each |List| item is one match.
-		See |complete-items| for the kind of items that are possible.
-		Note that the after calling this function you need to avoid
-		inserting anything that would cause completion to stop.
-		The match can be selected with CTRL-N and CTRL-P as usual with
-		Insert mode completion.  The popup menu will appear if
-		specified, see |ins-completion-menu|.
-		Example: >
-	inoremap <F5> <C-R>=ListMonths()<CR>
-
-	func! ListMonths()
-	  call complete(col('.'), ['January', 'February', 'March',
-		\ 'April', 'May', 'June', 'July', 'August', 'September',
-		\ 'October', 'November', 'December'])
-	  return ''
-	endfunc
-<		This isn't very useful, but it shows how it works.  Note that
-		an empty string is returned to avoid a zero being inserted.
-
-complete_add({expr})				*complete_add()*
-		Add {expr} to the list of matches.  Only to be used by the
-		function specified with the 'completefunc' option.
-		Returns 0 for failure (empty string or out of memory),
-		1 when the match was added, 2 when the match was already in
-		the list.
-		See |complete-functions| for an explanation of {expr}.  It is
-		the same as one item in the list that 'omnifunc' would return.
-
-complete_check()				*complete_check()*
-		Check for a key typed while looking for completion matches.
-		This is to be used when looking for matches takes some time.
-		Returns |TRUE| when searching for matches is to be aborted,
-		zero otherwise.
-		Only to be used by the function specified with the
-		'completefunc' option.
-
-						*confirm()*
-confirm({msg} [, {choices} [, {default} [, {type}]]])
-		Confirm() offers the user a dialog, from which a choice can be
-		made.  It returns the number of the choice.  For the first
-		choice this is 1.
-		Note: confirm() is only supported when compiled with dialog
-		support, see |+dialog_con| and |+dialog_gui|.
-
-		{msg} is displayed in a |dialog| with {choices} as the
-		alternatives.  When {choices} is missing or empty, "&OK" is
-		used (and translated).
-		{msg} is a String, use '\n' to include a newline.  Only on
-		some systems the string is wrapped when it doesn't fit.
-
-		{choices} is a String, with the individual choices separated
-		by '\n', e.g. >
-			confirm("Save changes?", "&Yes\n&No\n&Cancel")
-<		The letter after the '&' is the shortcut key for that choice.
-		Thus you can type 'c' to select "Cancel".  The shortcut does
-		not need to be the first letter: >
-			confirm("file has been modified", "&Save\nSave &All")
-<		For the console, the first letter of each choice is used as
-		the default shortcut key.
-
-		The optional {default} argument is the number of the choice
-		that is made if the user hits <CR>.  Use 1 to make the first
-		choice the default one.  Use 0 to not set a default.  If
-		{default} is omitted, 1 is used.
-
-		The optional {type} argument gives the type of dialog.  This
-		is only used for the icon of the GTK, Mac, Motif and Win32
-		GUI.  It can be one of these values: "Error", "Question",
-		"Info", "Warning" or "Generic".  Only the first character is
-		relevant.  When {type} is omitted, "Generic" is used.
-
-		If the user aborts the dialog by pressing <Esc>, CTRL-C,
-		or another valid interrupt key, confirm() returns 0.
-
-		An example: >
-   :let choice = confirm("What do you want?", "&Apples\n&Oranges\n&Bananas", 2)
-   :if choice == 0
-   :	echo "make up your mind!"
-   :elseif choice == 3
-   :	echo "tasteful"
-   :else
-   :	echo "I prefer bananas myself."
-   :endif
-<		In a GUI dialog, buttons are used.  The layout of the buttons
-		depends on the 'v' flag in 'guioptions'.  If it is included,
-		the buttons are always put vertically.  Otherwise,  confirm()
-		tries to put the buttons in one horizontal line.  If they
-		don't fit, a vertical layout is used anyway.  For some systems
-		the horizontal layout is always used.
-
 ch_canread({handle})						*ch_canread()*
 		Return non-zero when there is something to read from {handle}.
 		{handle} can be a Channel or a Job that has a Channel.
@@ -3170,6 +3043,176 @@ ch_status({handle} [, {options}])				*ch_status()*
 		"err".  For example, to get the error status: >
 			ch_status(job, {"part": "err"})
 <
+changenr()						*changenr()*
+		Return the number of the most recent change.  This is the same
+		number as what is displayed with |:undolist| and can be used
+		with the |:undo| command.
+		When a change was made it is the number of that change.  After
+		redo it is the number of the redone change.  After undo it is
+		one less than the number of the undone change.
+
+char2nr({expr}[, {utf8}])					*char2nr()*
+		Return number value of the first char in {expr}.  Examples: >
+			char2nr(" ")		returns 32
+			char2nr("ABC")		returns 65
+<		When {utf8} is omitted or zero, the current 'encoding' is used.
+		Example for "utf-8": >
+			char2nr("<22>")		returns 225
+			char2nr("<22>"[0])		returns 195
+<		With {utf8} set to 1, always treat as utf-8 characters.
+		A combining character is a separate character.
+		|nr2char()| does the opposite.
+
+cindent({lnum})						*cindent()*
+		Get the amount of indent for line {lnum} according the C
+		indenting rules, as with 'cindent'.
+		The indent is counted in spaces, the value of 'tabstop' is
+		relevant.  {lnum} is used just like in |getline()|.
+		When {lnum} is invalid or Vim was not compiled the |+cindent|
+		feature, -1 is returned.
+		See |C-indenting|.
+
+clearmatches()						*clearmatches()*
+		Clears all matches previously defined by |matchadd()| and the
+		|:match| commands.
+
+							*col()*
+col({expr})	The result is a Number, which is the byte index of the column
+		position given with {expr}.  The accepted positions are:
+		    .	    the cursor position
+		    $	    the end of the cursor line (the result is the
+			    number of bytes in the cursor line plus one)
+		    'x	    position of mark x (if the mark is not set, 0 is
+			    returned)
+		    v       In Visual mode: the start of the Visual area (the
+			    cursor is the end).  When not in Visual mode
+			    returns the cursor position.  Differs from |'<| in
+			    that it's updated right away.
+		Additionally {expr} can be [lnum, col]: a |List| with the line
+		and column number. Most useful when the column is "$", to get
+		the last column of a specific line.  When "lnum" or "col" is
+		out of range then col() returns zero.
+		To get the line number use |line()|.  To get both use
+		|getpos()|.
+		For the screen column position use |virtcol()|.
+		Note that only marks in the current file can be used.
+		Examples: >
+			col(".")		column of cursor
+			col("$")		length of cursor line plus one
+			col("'t")		column of mark t
+			col("'" . markname)	column of mark markname
+<		The first column is 1.  0 is returned for an error.
+		For an uppercase mark the column may actually be in another
+		buffer.
+		For the cursor position, when 'virtualedit' is active, the
+		column is one higher if the cursor is after the end of the
+		line.  This can be used to obtain the column in Insert mode: >
+			:imap <F2> <C-O>:let save_ve = &ve<CR>
+				\<C-O>:set ve=all<CR>
+				\<C-O>:echo col(".") . "\n" <Bar>
+				\let &ve = save_ve<CR>
+<
+
+complete({startcol}, {matches})			*complete()* *E785*
+		Set the matches for Insert mode completion.
+		Can only be used in Insert mode.  You need to use a mapping
+		with CTRL-R = (see |i_CTRL-R|).  It does not work after CTRL-O
+		or with an expression mapping.
+		{startcol} is the byte offset in the line where the completed
+		text start.  The text up to the cursor is the original text
+		that will be replaced by the matches.  Use col('.') for an
+		empty string.  "col('.') - 1" will replace one character by a
+		match.
+		{matches} must be a |List|.  Each |List| item is one match.
+		See |complete-items| for the kind of items that are possible.
+		Note that the after calling this function you need to avoid
+		inserting anything that would cause completion to stop.
+		The match can be selected with CTRL-N and CTRL-P as usual with
+		Insert mode completion.  The popup menu will appear if
+		specified, see |ins-completion-menu|.
+		Example: >
+	inoremap <F5> <C-R>=ListMonths()<CR>
+
+	func! ListMonths()
+	  call complete(col('.'), ['January', 'February', 'March',
+		\ 'April', 'May', 'June', 'July', 'August', 'September',
+		\ 'October', 'November', 'December'])
+	  return ''
+	endfunc
+<		This isn't very useful, but it shows how it works.  Note that
+		an empty string is returned to avoid a zero being inserted.
+
+complete_add({expr})				*complete_add()*
+		Add {expr} to the list of matches.  Only to be used by the
+		function specified with the 'completefunc' option.
+		Returns 0 for failure (empty string or out of memory),
+		1 when the match was added, 2 when the match was already in
+		the list.
+		See |complete-functions| for an explanation of {expr}.  It is
+		the same as one item in the list that 'omnifunc' would return.
+
+complete_check()				*complete_check()*
+		Check for a key typed while looking for completion matches.
+		This is to be used when looking for matches takes some time.
+		Returns |TRUE| when searching for matches is to be aborted,
+		zero otherwise.
+		Only to be used by the function specified with the
+		'completefunc' option.
+
+						*confirm()*
+confirm({msg} [, {choices} [, {default} [, {type}]]])
+		Confirm() offers the user a dialog, from which a choice can be
+		made.  It returns the number of the choice.  For the first
+		choice this is 1.
+		Note: confirm() is only supported when compiled with dialog
+		support, see |+dialog_con| and |+dialog_gui|.
+
+		{msg} is displayed in a |dialog| with {choices} as the
+		alternatives.  When {choices} is missing or empty, "&OK" is
+		used (and translated).
+		{msg} is a String, use '\n' to include a newline.  Only on
+		some systems the string is wrapped when it doesn't fit.
+
+		{choices} is a String, with the individual choices separated
+		by '\n', e.g. >
+			confirm("Save changes?", "&Yes\n&No\n&Cancel")
+<		The letter after the '&' is the shortcut key for that choice.
+		Thus you can type 'c' to select "Cancel".  The shortcut does
+		not need to be the first letter: >
+			confirm("file has been modified", "&Save\nSave &All")
+<		For the console, the first letter of each choice is used as
+		the default shortcut key.
+
+		The optional {default} argument is the number of the choice
+		that is made if the user hits <CR>.  Use 1 to make the first
+		choice the default one.  Use 0 to not set a default.  If
+		{default} is omitted, 1 is used.
+
+		The optional {type} argument gives the type of dialog.  This
+		is only used for the icon of the GTK, Mac, Motif and Win32
+		GUI.  It can be one of these values: "Error", "Question",
+		"Info", "Warning" or "Generic".  Only the first character is
+		relevant.  When {type} is omitted, "Generic" is used.
+
+		If the user aborts the dialog by pressing <Esc>, CTRL-C,
+		or another valid interrupt key, confirm() returns 0.
+
+		An example: >
+   :let choice = confirm("What do you want?", "&Apples\n&Oranges\n&Bananas", 2)
+   :if choice == 0
+   :	echo "make up your mind!"
+   :elseif choice == 3
+   :	echo "tasteful"
+   :else
+   :	echo "I prefer bananas myself."
+   :endif
+<		In a GUI dialog, buttons are used.  The layout of the buttons
+		depends on the 'v' flag in 'guioptions'.  If it is included,
+		the buttons are always put vertically.  Otherwise,  confirm()
+		tries to put the buttons in one horizontal line.  If they
+		don't fit, a vertical layout is used anyway.  For some systems
+		the horizontal layout is always used.
+
 							*copy()*
 copy({expr})	Make a copy of {expr}.  For Numbers and Strings this isn't
 		different from using {expr} directly.
@@ -3426,7 +3469,7 @@ execute({command} [, {silent}])					*execute()*
 			""		no `:silent` used
 			"silent"	`:silent` used
 			"silent!"	`:silent!` used
-		The default is 'silent'.  Note that with "silent!", unlike
+		The default is "silent".  Note that with "silent!", unlike
 		`:redir`, error messages are dropped.  When using an external
 		command the screen may be messed up, use `system()` instead.
 							*E930*
@@ -3892,11 +3935,14 @@ foldtext()	Returns a String, to be displayed for a closed fold.  This is
 		|v:foldstart|, |v:foldend| and |v:folddashes| variables.
 		The returned string looks like this: >
 			+-- 45 lines: abcdef
-<		The number of dashes depends on the foldlevel.  The "45" is
-		the number of lines in the fold.  "abcdef" is the text in the
-		first non-blank line of the fold.  Leading white space, "//"
-		or "/*" and the text from the 'foldmarker' and 'commentstring'
-		options is removed.
+<		The number of leading dashes depends on the foldlevel.  The
+		"45" is the number of lines in the fold.  "abcdef" is the text
+		in the first non-blank line of the fold.  Leading white space,
+		"//" or "/*" and the text from the 'foldmarker' and
+		'commentstring' options is removed.
+		When used to draw the actual foldtext, the rest of the line
+		will be filled with the fold char from the 'fillchars'
+		setting.
 		{not available when compiled without the |+folding| feature}
 
 foldtextresult({lnum})					*foldtextresult()*
@@ -4028,10 +4074,10 @@ get({dict}, {key} [, {default}])
 get({func}, {what})
 		Get an item with from Funcref {func}.  Possible values for
 		{what} are:
-			'name'	The function name
-			'func'	The function
-			'dict'	The dictionary
-			'args'	The list with arguments
+			"name"	The function name
+			"func"	The function
+			"dict"	The dictionary
+			"args"	The list with arguments
 
 							*getbufinfo()*
 getbufinfo([{expr}])
@@ -4171,6 +4217,10 @@ getchar([expr])						*getchar()*
 			  exe "normal " . v:mouse_col . "|"
 			endif
 <
+		When using bracketed paste only the first character is
+		returned, the rest of the pasted text is dropped.
+		|xterm-bracketed-paste|.
+
 		There is no prompt, you will somehow have to make clear to the
 		user that a character has to be typed.
 		There is no mapping for the character.
@@ -4366,8 +4416,8 @@ getfontname([{name}])					*getfontname()*
 		Only works when the GUI is running, thus not in your vimrc or
 		gvimrc file.  Use the |GUIEnter| autocommand to use this
 		function just after the GUI has started.
-		Note that the GTK 2 GUI accepts any font name, thus checking
-		for a valid name does not work.
+		Note that the GTK GUI accepts any font name, thus checking for
+		a valid name does not work.
 
 getfperm({fname})					*getfperm()*
 		The result is a String, which is the read, write, and execute
@@ -5796,16 +5846,20 @@ matchstrpos({expr}, {pat}[, {start}[, {count}]])		*matchstrpos()*
 		The type isn't changed, it's not necessarily a String.
 
 							*max()*
-max({list})	Return the maximum value of all items in {list}.
-		If {list} is not a list or one of the items in {list} cannot
-		be used as a Number this results in an error.
-		An empty |List| results in zero.
+max({expr})	Return the maximum value of all items in {expr}.
+		{expr} can be a list or a dictionary.  For a dictionary,
+		it returns the maximum of all values in the dictionary.
+		If {expr} is neither a list nor a dictionary, or one of the
+		items in {expr} cannot be used as a Number this results in
+                an error.  An empty |List| or |Dictionary| results in zero.
 
 							*min()*
-min({list})	Return the minimum value of all items in {list}.
-		If {list} is not a list or one of the items in {list} cannot
-		be used as a Number this results in an error.
-		An empty |List| results in zero.
+min({expr})	Return the minimum value of all items in {expr}.
+		{expr} can be a list or a dictionary.  For a dictionary,
+		it returns the minimum of all values in the dictionary.
+		If {expr} is neither a list nor a dictionary, or one of the
+		items in {expr} cannot be used as a Number this results in
+                an error.  An empty |List| or |Dictionary| results in zero.
 
 							*mkdir()* *E739*
 mkdir({name} [, {path} [, {prot}]])
@@ -5839,9 +5893,13 @@ mode([expr])	Return a string that indicates the current mode.
 			S	Select by line
 			CTRL-S	Select blockwise
 			i	Insert
+			ic	Insert mode completion |compl-generic|
+			ix	Insert mode |i_CTRL-X| completion
 			R	Replace |R|
+			Rc	Replace mode completion |compl-generic|
 			Rv	Virtual Replace |gR|
-			c	Command-line
+			Rx	Replace mode |i_CTRL-X| completion
+			c	Command-line editing
 			cv	Vim Ex mode |gQ|
 			ce	Normal Ex mode |Q|
 			r	Hit-enter prompt
@@ -5965,7 +6023,7 @@ printf({fmt}, {expr1} ...)				*printf()*
 		  %e	floating point number as 1.23e3, inf, -inf or nan
 		  %E	floating point number as 1.23E3, INF, -INF or NAN
 		  %g	floating point number, as %f or %e depending on value
-		  %G	floating point number, as %f or %E depending on value
+		  %G	floating point number, as %F or %E depending on value
 		  %%	the % character itself
 
 		Conversion specifications start with '%' and end with the
@@ -6163,6 +6221,14 @@ pyeval({expr})						*pyeval()*
 		non-string keys result in error.
 		{only available when compiled with the |+python| feature}
 
+pyxeval({expr})						*pyxeval()*
+		Evaluate Python expression {expr} and return its result
+		converted to Vim data structures.
+		Uses Python 2 or 3, see |python_x| and 'pyxversion'.
+		See also: |pyeval()|, |py3eval()|
+		{only available when compiled with the |+python| or the
+		|+python3| feature}
+
 							*E726* *E727*
 range({expr} [, {max} [, {stride}]])				*range()*
 		Returns a |List| with Numbers:
@@ -6254,15 +6320,17 @@ reltimestr({time})				*reltimestr()*
 		{only available when compiled with the |+reltime| feature}
 
 							*remote_expr()* *E449*
-remote_expr({server}, {string} [, {idvar}])
+remote_expr({server}, {string} [, {idvar} [, {timeout}]])
 		Send the {string} to {server}.  The string is sent as an
 		expression and the result is returned after evaluation.
 		The result must be a String or a |List|.  A |List| is turned
 		into a String by joining the items with a line break in
 		between (not at the end), like with join(expr, "\n").
-		If {idvar} is present, it is taken as the name of a
-		variable and a {serverid} for later use with
+		If {idvar} is present and not empty, it is taken as the name
+		of a variable and a {serverid} for later use with
 		remote_read() is stored there.
+		If {timeout} is given the read times out after this many
+		seconds.  Otherwise a timeout of 600 seconds is used.
 		See also |clientserver| |RemoteReply|.
 		This function is not available in the |sandbox|.
 		{only available when compiled with the |+clientserver| feature}
@@ -6301,9 +6369,10 @@ remote_peek({serverid} [, {retvar}])		*remote_peek()*
 			:let repl = ""
 			:echo "PEEK: ".remote_peek(id, "repl").": ".repl
 
-remote_read({serverid})				*remote_read()*
+remote_read({serverid}, [{timeout}])			*remote_read()*
 		Return the oldest available reply from {serverid} and consume
-		it.  It blocks until a reply is available.
+		it.  Unless a {timeout} in seconds is given, it blocks until a
+		reply is available.
 		See also |clientserver|.
 		This function is not available in the |sandbox|.
 		{only available when compiled with the |+clientserver| feature}
@@ -6321,6 +6390,7 @@ remote_send({server}, {string} [, {idvar}])
 		See also |clientserver| |RemoteReply|.
 		This function is not available in the |sandbox|.
 		{only available when compiled with the |+clientserver| feature}
+
 		Note: Any errors will be reported in the server and may mess
 		up the display.
 		Examples: >
@@ -6332,6 +6402,12 @@ remote_send({server}, {string} [, {idvar}])
 		:echo remote_send("gvim", ":sleep 10 | echo ".
 		 \ 'server2client(expand("<client>"), "HELLO")<CR>')
 <
+					*remote_startserver()* *E941* *E942*
+remote_startserver({name})
+		Become the server {name}.  This fails if already running as a
+		server, when |v:servername| is not empty.
+		{only available when compiled with the |+clientserver| feature}
+
 remove({list}, {idx} [, {end}])				*remove()*
 		Without {end}: Remove the item at {idx} from |List| {list} and
 		return the item.
@@ -6789,10 +6865,12 @@ setpos({expr}, {list})
 		    [bufnum, lnum, col, off, curswant]
 
 		"bufnum" is the buffer number.  Zero can be used for the
-		current buffer.  Setting the cursor is only possible for
-		the current buffer.  To set a mark in another buffer you can
-		use the |bufnr()| function to turn a file name into a buffer
-		number.
+		current buffer.  When setting an uppercase mark "bufnum" is
+		used for the mark position.  For other marks it specifies the
+		buffer to set the mark in.  You can use the |bufnr()| function
+		to turn a file name into a buffer number.
+		For setting the cursor and the ' mark "bufnum" is ignored,
+		since these are associated with a window, not a buffer.
 		Does not change the jumplist.
 
 		"lnum" and "col" are the position in the buffer.  The first
@@ -7687,7 +7765,7 @@ taglist({expr})							*taglist()*
 		may appear, they give the name of the entity the tag is
 		contained in.
 
-		The ex-command 'cmd' can be either an ex search pattern, a
+		The ex-command "cmd" can be either an ex search pattern, a
 		line number or a line number followed by a byte number.
 
 		If there are no matching tags, then an empty list is returned.
@@ -7746,20 +7824,21 @@ test_autochdir()					*test_autochdir()*
 		Set a flag to enable the effect of 'autochdir' before Vim
 		startup has finished.
 
-						*test_disable_char_avail()*
-test_disable_char_avail({expr})
-		When {expr} is 1 the internal char_avail() function will
-		return |FALSE|.  When {expr} is 0 the char_avail() function will
-		function normally.
-		Only use this for a test where typeahead causes the test not
-		to work.  E.g., to trigger the CursorMovedI autocommand event.
-
 test_garbagecollect_now()			 *test_garbagecollect_now()*
 		Like garbagecollect(), but executed right away.  This must
 		only be called directly to avoid any structure to exist
 		internally, and |v:testing| must have been set before calling
 		any function.
 
+test_ignore_error({expr})			 *test_ignore_error()*
+		Ignore any error containing {expr}.  A normal message is given
+		instead.
+		This is only meant to be used in tests, where catching the
+		error with try/catch cannot be used (because it skips over
+		following code).
+		{expr} is used literally, not as a pattern.
+		There is currently no way to revert this.
+
 test_null_channel()					*test_null_channel()*
 		Return a Channel that is null. Only useful for testing.
 		{only available when compiled with the +channel feature}
@@ -7780,10 +7859,24 @@ test_null_partial()					*test_null_partial()*
 test_null_string()					*test_null_string()*
 		Return a String that is null. Only useful for testing.
 
+test_override({name}, {val})				*test_override()*
+		Overrides certain parts of Vims internal processing to be able
+		to run tests. Only to be used for testing Vim!
+		The override is enabled when {val} is non-zero and removed
+		when {val} is zero.
+		Current supported values for name are: 
+
+		name	     effect when {val} is non-zero ~
+		redraw       disable the redrawing() function
+		char_avail   disable the char_avail() function
+		ALL	     clear all overrides ({val} is not used)
+
 test_settime({expr})					*test_settime()*
 		Set the time Vim uses internally.  Currently only used for
 		timestamps in the history, as they are used in viminfo, and
 		for undo.
+		Using a value of 1 makes Vim not sleep after a warning or
+		error message.
 		{expr} must evaluate to a number.  When the value is zero the
 		normal behavior is restored.
 
@@ -8135,7 +8228,7 @@ winnr([{arg}])	The result is a Number, which is the number of the current
 		is returned.
 		The number can be used with |CTRL-W_w| and ":wincmd w"
 		|:wincmd|.
-		Also see |tabpagewinnr()|.
+		Also see |tabpagewinnr()| and |win_getid()|.
 
 							*winrestcmd()*
 winrestcmd()	Returns a sequence of |:resize| commands that should restore
@@ -8402,6 +8495,7 @@ printer			Compiled with |:hardcopy| support.
 profile			Compiled with |:profile| support.
 python			Compiled with Python 2.x interface. |has-python|
 python3			Compiled with Python 3.x interface. |has-python|
+pythonx			Compiled with |python_x| interface. |has-pythonx|
 qnx			QNX version of Vim.
 quickfix		Compiled with |quickfix| support.
 reltime			Compiled with |reltime()| support.
@@ -8439,6 +8533,7 @@ toolbar			Compiled with support for |gui-toolbar|.
 ttyin			input is a terminal (tty)
 ttyout			output is a terminal (tty)
 unix			Unix version of Vim.
+unnamedplus		Compiled with support for "unnamedplus" in 'clipboard'
 user_commands		User-defined commands.
 vertsplit		Compiled with vertically split windows |:vsplit|.
 vim_starting		True while initial source'ing takes place. |startup|
@@ -8942,6 +9037,11 @@ This does NOT work: >
 			value and the global value are changed.
 			Example: >
 				:let &path = &path . ',/usr/local/include'
+<			This also works for terminal codes in the form t_xx.
+			But only for alphanumerical names.  Example: >
+				:let &t_k1 = "\<Esc>[234;"
+<			When the code does not exist yet it will be created as
+			a terminal key code, there is no error.
 
 :let &{option-name} .= {expr1}
 			For a string option: Append {expr1} to the value.
@@ -9049,9 +9149,12 @@ This does NOT work: >
 				:lockvar v
 				:let v = 'asdf'		" fails!
 				:unlet v
-<							*E741*
+<							*E741* *E940*
 			If you try to change a locked variable you get an
-			error message: "E741: Value is locked: {name}"
+			error message: "E741: Value is locked: {name}".
+			If you try to lock or unlock a built-in variable you
+			get an error message: "E940: Cannot lock or unlock
+			variable {name}".
 
 			[depth] is relevant when locking a |List| or
 			|Dictionary|.  It specifies how deep the locking goes:

runtime/doc/fold.txt

@@ -64,7 +64,7 @@ whichever is lower.  These are empty or white lines and lines starting
 with a character in 'foldignore'.  White space is skipped before checking for
 characters in 'foldignore'.  For C use "#" to ignore preprocessor lines.
 
-When you want to ignore lines in another way, use the 'expr' method.  The
+When you want to ignore lines in another way, use the "expr" method.  The
 |indent()| function can be used in 'foldexpr' to get the indent of a line.
 
 
@@ -139,7 +139,7 @@ fold level.  But note that foldlevel() may return -1 if the level is not known
 yet.  And it returns the level at the start of the line, while a fold might
 end in that line.
 
-It may happened that folds are not updated properly.  You can use |zx| or |zX|
+It may happen that folds are not updated properly.  You can use |zx| or |zX|
 to force updating folds.
 
 

runtime/doc/hangulin.txt

@@ -81,8 +81,8 @@ And there should be no ':set guifont'.  If it exists, then Gvim ignores
 ':set guifontset'.  It means VIM runs without fontset supporting.
 So, you can see only English.  Hangul does not be correctly displayed.
 
-After 'fontset' feature is enabled, VIM does not allow using english
-font only in 'font' setting for syntax.
+After "fontset" feature is enabled, VIM does not allow using english
+font only in "font" setting for syntax.
 For example, if you use >
    :set guifontset=eng_font,your_font
 in your .gvimrc, then you should do for syntax >

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 8.0.  Last change: 2016 Apr 01
+*helphelp.txt*	For Vim version 8.0.  Last change: 2017 Feb 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -28,10 +28,16 @@ Help on help files					*helphelp*
 
 						*{subject}* *E149* *E661*
 :h[elp] {subject}	Like ":help", additionally jump to the tag {subject}.
-			{subject} can include wildcards like "*", "?" and
+			For example:  >
+				:help options
+
+<			{subject} can include wildcards such as "*", "?" and
 			"[a-z]":
 			   :help z?	jump to help for any "z" command
 			   :help z.	jump to the help for "z."
+			But when a tag exists it is taken literally:
+			   :help :?	jump to help for ":?"
+
 			If there is no full match for the pattern, or there
 			are several matches, the "best" match will be used.
 			A sophisticated algorithm is used to decide which
@@ -68,18 +74,19 @@ Help on help files					*helphelp*
 			example to find help for CTRL-V in Insert mode: >
 				:help i^V
 <
-			To use a regexp |pattern|, first do ":help" and then
+			It is also possible to first do ":help" and then
 			use ":tag {pattern}" in the help window.  The
 			":tnext" command can then be used to jump to other
 			matches, "tselect" to list matches and choose one. >
-				:help index| :tse z.
+				:help index
+				:tselect /.*mode
 
 <			When there is no argument you will see matches for
 			"help", to avoid listing all possible matches (that
 			would be very slow).
 			The number of matches displayed is limited to 300.
 
-			This command can be followed by '|' and another
+			The `:help` command can be followed by '|' and another
 			command, but you don't need to escape the '|' inside a
 			help command.  So these both work: >
 				:help |
@@ -307,7 +314,7 @@ the applicable Vim version.  The last field specifies the last modification
 date of the file.  Each field is separated by a tab.
 
 At the bottom of the help file, place a Vim modeline to set the 'textwidth'
-and 'tabstop' options and the 'filetype' to 'help'.  Never set a global option
+and 'tabstop' options and the 'filetype' to "help".  Never set a global option
 in such a modeline, that can have consequences undesired by whoever reads that
 help.
 

runtime/doc/if_mzsch.txt

@@ -249,7 +249,7 @@ Windows							    *mzscheme-window*
 5. mzeval() Vim function				    *mzscheme-mzeval*
 
 To facilitate bi-directional interface, you can use |mzeval()| function to
-evaluate MzScheme expressions and pass their values to VimL.
+evaluate MzScheme expressions and pass their values to Vim script.
 
 ==============================================================================
 6. Using Function references				    *mzscheme-funcref*

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 8.0.  Last change: 2016 Sep 17
+*if_pyth.txt*   For Vim version 8.0.  Last change: 2017 Mar 09
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -16,6 +16,8 @@ The Python Interface to Vim				*python* *Python*
 8. pyeval(), py3eval() Vim functions		|python-pyeval|
 9. Dynamic loading				|python-dynamic|
 10. Python 3					|python3|
+11. Python X					|python_x|
+12. Building with Python support		|python-building|
 
 {Vi does not have any of these commands}
 
@@ -173,8 +175,8 @@ vim.eval(str)						*python-eval*
 
 	    :py tagList = vim.eval('taglist("eval_expr")')
 <	The latter will return a python list of python dicts, for instance:
-	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name':
-	'eval_expr', 'kind': 'f', 'filename': './src/eval.c'}]
+	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name': ~
+	'eval_expr', 'kind': 'f', 'filename': './src/eval.c'}] ~
 
 vim.bindeval(str)					*python-bindeval*
 	Like |python-eval|, but returns special objects described in 
@@ -675,11 +677,11 @@ vim.Function object				*python-Function*
                      dictionary. Note that explicit `self` keyword used when 
                      calling resulting object overrides this attribute.
         auto_rebind  Boolean. True if partial created from this Python object 
-                     and stored in the VimL dictionary should be automatically 
-                     rebound to the dictionary it is stored in when this 
-                     dictionary is indexed. Exposes Vim internal difference 
-                     between `dict.func` (auto_rebind=True) and 
-                     `function(dict.func,dict)` (auto_rebind=False). This 
+                     and stored in the Vim script dictionary should be
+                     automatically rebound to the dictionary it is stored in
+                     when this dictionary is indexed. Exposes Vim internal
+                     difference between `dict.func` (auto_rebind=True) and
+                     `function(dict.func,dict)` (auto_rebind=False). This
                      attribute makes no sense if `self` attribute is `None`.
 
     Constructor additionally accepts `args`, `self` and `auto_rebind` 
@@ -710,7 +712,8 @@ vim.Function object				*python-Function*
 8. pyeval() and py3eval() Vim functions			*python-pyeval*
 
 To facilitate bi-directional interface, you can use |pyeval()| and |py3eval()| 
-functions to evaluate Python expressions and pass their values to VimL.
+functions to evaluate Python expressions and pass their values to Vim script.
+|pyxeval()| is also available.
 
 ==============================================================================
 9. Dynamic loading					*python-dynamic*
@@ -729,9 +732,11 @@ To use the Python interface the Python DLL must be in your search path.  In a
 console window type "path" to see what directories are used.  The 'pythondll'
 or 'pythonthreedll' option can be also used to specify the Python DLL.
 
-The name of the DLL must match the Python version Vim was compiled with.
-Currently the name is "python24.dll".  That is for Python 2.4.  To know for
-sure edit "gvim.exe" and search for "python\d*.dll\c".
+The name of the DLL should match the Python version Vim was compiled with.
+Currently the name for Python 2 is "python27.dll", that is for Python 2.7.
+That is the default value for 'pythondll'.  For Python 3 it is python35.dll
+(Python 3.5).  To know for sure edit "gvim.exe" and search for
+"python\d*.dll\c".
 
 
 Unix ~
@@ -811,5 +816,91 @@ dynamically, these has() calls will try to load them.  If only one can be
 loaded at a time, just checking if Python 2 or 3 are available will prevent
 the other one from being available.
 
+==============================================================================
+11. Python X						*python_x* *pythonx*
+
+Because most python code can be written so that it works with python 2.6+ and
+python 3 the pyx* functions and commands have been written.  They work exactly
+the same as the Python 2 and 3 variants, but select the Python version using
+the 'pyxversion' setting.
+
+You should set 'pyxversion' in your |.vimrc| to prefer Python 2 or Python 3
+for Python commands. If you change this setting at runtime you may risk that
+state of plugins (such as initialization) may be lost.
+
+If you want to use a module, you can put it in the {rtp}/pythonx directory.
+See |pythonx-directory|.
+
+							*:pyx* *:pythonx*
+The `:pyx` and `:pythonx` commands work similar to `:python`.  A simple check
+if the `:pyx` command is working: >
+	:pyx print("Hello")
+
+To see what version of Python is being used: >
+	:pyx import sys
+	:pyx print(sys.version)
+<
+					*:pyxfile* *python_x-special-comments*
+The `:pyxfile` command works similar to `:pyfile`.  However you can add one of
+these comments to force Vim using `:pyfile` or `:py3file`: >
+  #!/any string/python2		" Shebang. Must be the first line of the file.
+  #!/any string/python3		" Shebang. Must be the first line of the file.
+  # requires python 2.x		" Maximum lines depend on 'modelines'.
+  # requires python 3.x		" Maximum lines depend on 'modelines'.
+Unlike normal modelines, the bottom of the file is not checked.
+If none of them are found, the 'pyxversion' setting is used.
+							*W20* *W21*
+If Vim does not support the selected Python version a silent message will be
+printed.  Use `:messages` to read them.
+
+							*:pyxdo*
+The `:pyxdo` command works similar to `:pydo`.
+
+							*has-pythonx*
+You can test if pyx* commands are available with: >
+	if has('pythonx')
+	  echo 'pyx* commands are available. (Python ' . &pyx . ')'
+	endif
+
+When compiled with only one of |+python| or |+python3|, the has() returns 1.
+When compiled with both |+python| and |+python3|, the test depends on the
+'pyxversion' setting.  If 'pyxversion' is 0, it tests Python 3 first, and if
+it is not available then Python 2.  If 'pyxversion' is 2 or 3, it tests only
+Python 2 or 3 respectively.
+
+Note that for `has('pythonx')` to work it may try to dynamically load Python 3
+or 2.  This may have side effects, especially when Vim can only load one of
+the two.
+
+If a user prefers Python 2 and want to fallback to Python 3, he needs to set
+'pyxversion' explicitly in his |.vimrc|.  E.g.: >
+	if has('python')
+	  set pyx=2
+	elseif has('python3')
+	  set pyx=3
+	endif
+
+==============================================================================
+12. Building with Python support			*python-building*
+
+A few hints for building with Python 2 or 3 support.
+
+UNIX
+
+See src/Makefile for how to enable including the Python interface.
+
+On Ubuntu you will want to install these packages for Python 2:
+	python
+	python-dev
+For Python 3:
+	python3
+	pytyon3-dev
+For Python 3.6:
+	python3.6
+	pytyon3.6-dev
+
+If you have more than one version of Python 3, you need to link python3 to the
+one you prefer, before running configure.
+
 ==============================================================================
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/if_ruby.txt

@@ -72,7 +72,7 @@ To see what version of Ruby you have: >
 
 							*:rubyfile* *:rubyf*
 :rubyf[ile] {file}	Execute the Ruby script in {file}.  This is the same as
-			":ruby load 'file'", but allows file name completion.
+			`:ruby load 'file'`, but allows file name completion.
 
 Executing Ruby commands is not possible in the |sandbox|.
 

runtime/doc/indent.txt

@@ -324,6 +324,21 @@ The examples below assume a 'shiftwidth' of 4.
 		  {                          {
 		      void function();       void function();
 		  }                          }
+<
+							*cino-E*
+	EN    Indent inside C++ linkage specifications (extern "C" or
+	      extern "C++") N characters extra compared to a normal block.
+	      (default 0).
+
+		cino=			   cino=E-s >
+		  extern "C" {               extern "C" {
+		      void function();       void function();
+		  }                          }
+
+		  extern "C"                 extern "C"
+		  {                          {
+		      void function();       void function();
+		  }                          }
 <
 							*cino-p*
 	pN    Parameter declarations for K&R-style function declarations will
@@ -554,7 +569,7 @@ The examples below assume a 'shiftwidth' of 4.
 
 
 The defaults, spelled out in full, are:
-	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,N0,ps,ts,is,+s,
+	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,N0,E0,ps,ts,is,+s,
 			c3,C0,/0,(2s,us,U0,w0,W0,k0,m0,j0,J0,)20,*70,#0
 
 Vim puts a line in column 1 if:

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 8.0.  Last change: 2016 Sep 27
+*index.txt*     For Vim version 8.0.  Last change: 2017 Feb 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1004,10 +1004,12 @@ tag		command	      action in Command-line editing mode	~
 |c_<CR>|	<CR>		execute entered command
 |c_CTRL-M|	CTRL-M		same as <CR>
 |c_CTRL-N|	CTRL-N		after using 'wildchar' with multiple matches:
-				go to next match, otherwise: same as <Down>
+				go to next match, otherwise: recall older
+				command-line from history.
 		CTRL-O		not used
 |c_CTRL-P|	CTRL-P		after using 'wildchar' with multiple matches:
-				go to previous match, otherwise: same as <Up>
+				go to previous match, otherwise: recall older
+				command-line from history.
 |c_CTRL-Q|	CTRL-Q		same as CTRL-V, unless it's used for terminal
 				control flow
 |c_CTRL-R|	CTRL-R {0-9a-z"%#*:= CTRL-F CTRL-P CTRL-W CTRL-A}
@@ -1440,6 +1442,10 @@ tag	      command	      action ~
 |:python|	:py[thon]	execute Python command
 |:pydo|		:pyd[o]		execute Python command for each line
 |:pyfile|	:pyf[ile]	execute Python script file
+|:pyx|		:pyx		execute |python_x| command
+|:pythonx|	:pythonx	same as :pyx
+|:pyxdo|	:pyxd[o]	execute |python_x| command for each line
+|:pyxfile|	:pyxf[ile]	execute |python_x| script file
 |:quit|		:q[uit]		quit current window (when one window quit Vim)
 |:quitall|	:quita[ll]	quit Vim
 |:qall|		:qa[ll]		quit Vim

runtime/doc/insert.txt

@@ -1103,7 +1103,7 @@ items:
 	empty		when non-zero this match will be added even when it is
 			an empty string
 
-All of these except 'icase', 'dup' and 'empty' must be a string.  If an item
+All of these except "icase", "dup" and "empty" must be a string.  If an item
 does not meet these requirements then an error message is given and further
 items in the list are not used.  You can mix string and Dictionary items in
 the returned list.

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.0.  Last change: 2016 Oct 15
+*map.txt*       For Vim version 8.0.  Last change: 2017 Mar 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -584,7 +584,8 @@ Upper and lowercase differences are ignored.
 
 							*map-comments*
 It is not possible to put a comment after these commands, because the '"'
-character is considered to be part of the {lhs} or {rhs}.
+character is considered to be part of the {lhs} or {rhs}. However, one can
+use |", since this starts a new, empty command with a comment.
 
 							*map_bar* *map-bar*
 Since the '|' character is used to separate a map command from the next

runtime/doc/mlang.txt

@@ -1,4 +1,4 @@
-*mlang.txt*     For Vim version 8.0.  Last change: 2016 Jan 16
+*mlang.txt*     For Vim version 8.0.  Last change: 2017 Mar 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -179,6 +179,7 @@ Send an e-mail to the Vim maintainer <maintainer@vim.org>.
 			special characters like "&" and "<Tab>" need to be
 			included.  Spaces and dots need to be escaped with a
 			backslash, just like in other |:menu| commands.
+			Case in {english} is ignored.
 
 See the $VIMRUNTIME/lang directory for examples.
 

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.0.  Last change: 2016 Nov 24
+*motion.txt*    For Vim version 8.0.  Last change: 2017 Mar 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -193,7 +193,7 @@ l		or					*l*
 
 							*$* *<End>* *<kEnd>*
 $  or <End>		To the end of the line.  When a count is given also go
-			[count - 1] lines downward |inclusive|.
+			[count - 1] lines downward. |inclusive| motion.
 			In Visual mode the cursor goes to just after the last
 			character in the line.
 			When 'virtualedit' is active, "$" may move the cursor

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.0.  Last change: 2017 Jan 15
+*options.txt*	For Vim version 8.0.  Last change: 2017 Mar 09
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -727,6 +727,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	which can be easier to read at certain sizes on certain displays.
 	Setting this option can sometimes cause problems if 'guifont' is set
 	to its default (empty string).
+	NOTE: This option is reset when 'compatible' is set.
 
 			*'autochdir'* *'acd'* *'noautochdir'* *'noacd'*
 'autochdir' 'acd'	boolean (default off)
@@ -760,6 +761,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	- Disable the use of 'keymap' (without changing its value).
 	Note that 'arabicshape' and 'delcombine' are not reset (it is a global
 	option).
+	NOTE: This option is reset when 'compatible' is set.
 	Also see |arabic.txt|.
 
 					*'arabicshape'* *'arshape'*
@@ -781,6 +783,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	form.
 	Arabic is a complex language which requires other settings, for
 	further details see |arabic.txt|.
+	NOTE: This option is set when 'compatible' is set.
 
 			*'autoindent'* *'ai'* *'noautoindent'* *'noai'*
 'autoindent' 'ai'	boolean	(default off)
@@ -993,6 +996,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	the system may refuse to do this.  In that case the "auto" value will
 	again not rename the file.
 
+	NOTE: This option is set to the Vi default value when 'compatible' is
+	set and to the Vim default value when 'compatible' is reset.
+
 						*'backupdir'* *'bdir'*
 'backupdir' 'bdir'	string	(default for Amiga: ".,t:",
 				 for MS-DOS and Win32: ".,$TEMP,c:/tmp,c:/temp"
@@ -1120,6 +1126,9 @@ A jump table for the options with a short description can be found at |Q_op|.
     set bexpr=MyBalloonExpr()
     set ballooneval
 <
+	Also see |balloon_show()|, can be used if the content of the balloon
+	is to be fetched asynchronously.
+
 	NOTE: The balloon is displayed only if the cursor is on a text
 	character.  If the result of evaluating 'balloonexpr' is not empty,
 	Vim does not try to send a message to an external debugger (Netbeans
@@ -1136,6 +1145,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	When they are supported "\n" characters will start a new line.  If the
 	expression evaluates to a |List| this is equal to using each List item
 	as a string and putting "\n" in between them.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 						*'belloff'* *'bo'*
 'belloff' 'bo'		string	(default "")
@@ -1173,8 +1183,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	wildmode    More matches in |cmdline-completion| available
 		    (depends on the 'wildmode' setting).
 
-	This is most useful, to fine tune when in insert mode the bell should
-	be rung. For normal mode and ex commands, the bell is often rung to
+	This is most useful to fine tune when in Insert mode the bell should
+	be rung. For Normal mode and Ex commands, the bell is often rung to
 	indicate that an error occurred. It can be silenced by adding the
 	"error" keyword.
 
@@ -1256,6 +1266,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Every wrapped line will continue visually indented (same amount of
 	space as the beginning of that line), thus preserving horizontal blocks
 	of text.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'breakindentopt'* *'briopt'*
 'breakindentopt' 'briopt' string (default empty)
@@ -1432,6 +1443,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 		:exe "set cedit=\<Esc>"
 <	|Nvi| also has this option, but it only uses the first character.
 	See |cmdwin|.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 				*'charconvert'* *'ccv'* *E202* *E214* *E513*
 'charconvert' 'ccv'	string (default "")
@@ -1702,12 +1715,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	This option has the effect of making Vim either more Vi-compatible, or
 	make Vim behave in a more useful way.
+
 	This is a special kind of option, because when it's set or reset,
-	other options are also changed as a side effect.  CAREFUL: Setting or
-	resetting this option can have a lot of unexpected effects: Mappings
-	are interpreted in another way, undo behaves differently, etc.  If you
-	set this option in your vimrc file, you should probably put it at the
-	very start.
+	other options are also changed as a side effect.
+	NOTE: Setting or resetting this option can have a lot of unexpected
+	effects: Mappings are interpreted in another way, undo behaves
+	differently, etc.  If you set this option in your vimrc file, you
+	should probably put it at the very start.
+
 	By default this option is on and the Vi defaults are used for the
 	options.  This default was chosen for those people who want to use Vim
 	just like Vi, and don't even (want to) know about the 'compatible'
@@ -1722,70 +1737,98 @@ A jump table for the options with a short description can be found at |Q_op|.
 	|posix-compliance|.
 	You can also set this option with the "-C" argument, and reset it with
 	"-N".  See |-C| and |-N|.
-	Switching this option off makes the Vim defaults be used for options
-	that have a different Vi and Vim default value.  See the options
-	marked with a '+' below.  Other options are not modified.
-	At the moment this option is set, several other options will be set
-	or reset to make Vim as Vi-compatible as possible.  See the table
-	below.  This can be used if you want to revert to Vi compatible
-	editing.
-	See also 'cpoptions'.
+	See 'cpoptions' for more fine tuning of Vi compatibility.
 
-	option		+ set value	effect	~
+	When this option is set, numerous other options are set to make Vim as
+	Vi-compatible as possible.  When this option is unset, various options
+	are set to make Vim more useful.  The table below lists all the
+	options affected.
+	The {?} column indicates when the options are affected:
+	+  Means that the option is set to the value given in {set value} when
+	   'compatible' is set.
+	&  Means that the option is set to the value given in {set value} when
+	   'compatible' is set AND is set to its Vim default value when
+	   'compatible' is unset.
+	-  Means the option is NOT changed when setting 'compatible' but IS
+	   set to its Vim default when 'compatible' is unset.
+	The {effect} column summarises the change when 'compatible' is set.
 
-	'allowrevins'	  off		no CTRL-_ command
-	'backspace'	  ""		normal backspace
-	'backupcopy'	  Unix: "yes"	backup file is a copy
-			  else: "auto"  copy or rename backup file
-	'backup'	  off		no backup file
-	'cedit'		+ ""		no key to open the |cmdwin|
-	'cindent'	  off		no C code indentation
-	'cpoptions'	+ (all flags)	Vi-compatible flags
-	'cscopetag'	  off		don't use cscope for ":tag"
-	'cscopetagorder'  0		see |cscopetagorder|
-	'cscopeverbose'	  off		see |cscopeverbose|
-	'digraph'	  off		no digraphs
-	'esckeys'	+ off		no <Esc>-keys in Insert mode
-	'expandtab'	  off		tabs not expanded to spaces
-	'fileformats'	+ ""		no automatic file format detection,
+	option		? set value	effect ~
+
+	'allowrevins'	+ off		no CTRL-_ command
+	'antialias'	+ off		don't use antialiased fonts
+	'arabic'	+ off	 	reset arabic-related options
+	'arabicshape'	+ on		correct character shapes
+	'backspace'	+ ""		normal backspace
+	'backup'	+ off		no backup file
+	'backupcopy'	& Unix: "yes"	backup file is a copy
+			  else: "auto"	copy or rename backup file
+	'balloonexpr'	+ ""		text to show in evaluation balloon
+	'breakindent'	+ off		don't indent when wrapping lines
+	'cedit'		- {unchanged}	{set vim default only on resetting 'cp'}
+	'cindent'	+ off		no C code indentation
+	'compatible'	- {unchanged}	{set vim default only on resetting 'cp'}
+	'copyindent'	+ off		don't copy indent structure
+	'cpoptions'	& (all flags)	Vi-compatible flags
+	'cscopepathcomp'+ 0		don't show directories in tags list
+	'cscoperelative'+ off		
+	'cscopetag'	+ off		don't use cscope for ":tag"
+	'cscopetagorder'+ 0		see |cscopetagorder|
+	'cscopeverbose'	+ off		see |cscopeverbose|
+	'delcombine'	+ off		unicode: delete whole char combination
+	'digraph'	+ off		no digraphs
+	'esckeys'	& off		no <Esc>-keys in Insert mode
+	'expandtab'	+ off		tabs not expanded to spaces
+	'fileformats'	& ""		no automatic file format detection,
 			  "dos,unix"	except for DOS, Windows and OS/2
-	'formatoptions'	+ "vt"		Vi compatible formatting
-	'gdefault'	  off		no default 'g' flag for ":s"
-	'history'	+ 0		no commandline history
-	'hkmap'		  off		no Hebrew keyboard mapping
-	'hkmapp'	  off		no phonetic Hebrew keyboard mapping
-	'hlsearch'	  off		no highlighting of search matches
-	'incsearch'	  off		no incremental searching
-	'indentexpr'	  ""		no indenting by expression
-	'insertmode'	  off		do not start in Insert mode
-	'iskeyword'	+ "@,48-57,_"	keywords contain alphanumeric
+	'formatexpr'	+ ""		use 'formatprg' for auto-formatting
+	'formatoptions'	& "vt"		Vi compatible formatting
+	'gdefault'	+ off		no default 'g' flag for ":s"
+	'history'	& 0		no commandline history
+	'hkmap'		+ off		no Hebrew keyboard mapping
+	'hkmapp'	+ off		no phonetic Hebrew keyboard mapping
+	'hlsearch'	+ off		no highlighting of search matches
+	'incsearch'	+ off		no incremental searching
+	'indentexpr'	+ ""		no indenting by expression
+	'insertmode'	+ off		do not start in Insert mode
+	'iskeyword'	& "@,48-57,_"	keywords contain alphanumeric
 						characters and '_'
-	'joinspaces'	  on		insert 2 spaces after period
-	'modeline'	+ off		no modelines
-	'more'		+ off		no pauses in listings
-	'revins'	  off		no reverse insert
-	'ruler'		  off		no ruler
-	'scrolljump'	  1		no jump scroll
-	'scrolloff'	  0		no scroll offset
-	'shiftround'	  off		indent not rounded to shiftwidth
-	'shortmess'	+ ""		no shortening of messages
-	'showcmd'	+ off		command characters not shown
-	'showmode'	+ off		current mode not shown
-	'smartcase'	  off		no automatic ignore case switch
-	'smartindent'	  off		no smart indentation
-	'smarttab'	  off		no smart tab size
-	'softtabstop'	  0		tabs are always 'tabstop' positions
-	'startofline'	  on		goto startofline with some commands
-	'tagrelative'	+ off		tag file names are not relative
-	'textauto'	+ off		no automatic textmode detection
-	'textwidth'	  0		no automatic line wrap
-	'tildeop'	  off		tilde is not an operator
-	'ttimeout'	  off		no terminal timeout
-	'viminfo'       + {unchanged}	no viminfo file	
-	'whichwrap'	+ ""		left-right movements don't wrap
-	'wildchar'	+ CTRL-E	only when the current value is <Tab>
+	'joinspaces'	+ on		insert 2 spaces after period
+	'modeline'	& off		no modelines
+	'more'		& off		no pauses in listings
+	'mzquantum'	- {unchanged}	{set vim default only on resetting 'cp'}
+	'numberwidth'	& 8		min number of columns for line number
+	'preserveindent'+ off		don't preserve current indent structure
+						when changing it
+	'revins'	+ off		no reverse insert
+	'ruler'		+ off		no ruler
+	'scrolljump'	+ 1		no jump scroll
+	'scrolloff'	+ 0		no scroll offset
+	'shelltemp'	- {unchanged}	{set vim default only on resetting 'cp'}
+	'shiftround'	+ off		indent not rounded to shiftwidth
+	'shortmess'	& ""		no shortening of messages
+	'showcmd'	& off		command characters not shown
+	'showmode'	& off		current mode not shown
+	'sidescrolloff'	+ 0		cursor moves to edge of screen in scroll
+	'smartcase'	+ off		no automatic ignore case switch
+	'smartindent'	+ off		no smart indentation
+	'smarttab'	+ off		no smart tab size
+	'softtabstop'	+ 0		tabs are always 'tabstop' positions
+	'startofline'	+ on		goto startofline with some commands
+	'tagcase'	& "followic"	'ignorecase' when searching tags file
+	'tagrelative'	& off		tag file names are not relative
+	'termguicolors'	+ off		don't use highlight-(guifg|guibg)
+	'textauto'	& off		no automatic textmode detection
+	'textwidth'	+ 0		no automatic line wrap
+	'tildeop'	+ off		tilde is not an operator
+	'ttimeout'	+ off		no terminal timeout
+	'undofile'	+ off		don't use an undo file
+	'viminfo'       - {unchanged}	{set Vim default only on resetting 'cp'}
+	'virtualedit'	+ ""		cursor can only be placed on characters
+	'whichwrap'	& ""		left-right movements don't wrap
+	'wildchar'	& CTRL-E	only when the current value is <Tab>
 					use CTRL-E for cmdline completion
-	'writebackup'	  on or off	depends on the |+writebackup| feature
+	'writebackup'	+ on or off	depends on the |+writebackup| feature
 
 						*'complete'* *'cpt'* *E535*
 'complete' 'cpt'	string	(default: ".,w,b,u,t,i")
@@ -1960,7 +2003,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	existing line.  'expandtab' has no effect on these characters, a Tab
 	remains a Tab.  If the new indent is greater than on the existing
 	line, the remaining space is filled in the normal manner.
-	NOTE: 'copyindent' is reset when 'compatible' is set.
+	NOTE: This option is reset when 'compatible' is set.
 	Also see 'preserveindent'.
 
 						*'cpoptions'* *'cpo'* *cpo*
@@ -2321,6 +2364,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	Determines how many components of the path to show in a list of tags.
 	See |cscopepathcomp|.
+	NOTE: This option is set to 0 when 'compatible' is set.
 
 						*'cscopeprg'* *'csprg'*
 'cscopeprg' 'csprg'	string	(default "cscope")
@@ -2350,6 +2394,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	In the absence of a prefix (-P) for cscope. setting this option enables
 	to use the basename of cscope.out path as the prefix.
 	See |cscoperelative|.
+	NOTE: This option is reset when 'compatible' is set.
 
 				*'cscopetag'* *'cst'* *'nocscopetag'* *'nocst'*
 'cscopetag' 'cst'	boolean (default off)
@@ -2469,6 +2514,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This is useful for Arabic, Hebrew and many other languages where one
 	may have combining characters overtop of base characters, and want
 	to remove only the combining ones.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'dictionary'* *'dict'*
 'dictionary' 'dict'	string	(default "")
@@ -2684,8 +2730,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option cannot be set from a |modeline|.  It would most likely
 	corrupt the text.
 
-	NOTE: For GTK+ 2 it is highly recommended to set 'encoding' to
-	"utf-8".  Although care has been taken to allow different values of
+	NOTE: For GTK+ 2 or later, it is highly recommended to set 'encoding'
+	to "utf-8".  Although care has been taken to allow different values of
 	'encoding', "utf-8" is the natural choice for the environment and
 	avoids unnecessary conversion overhead.  "utf-8" has not been made
 	the default to prevent different behavior of the GUI and terminal
@@ -2883,6 +2929,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	done when writing the file.  For reading see below.
 	When 'fileencoding' is empty, the same value as 'encoding' will be
 	used (no conversion when reading or writing a file).
+	No error will be given when the value is set, only when it is used,
+	only when writing a file.
 	Conversion will also be done when 'encoding' and 'fileencoding' are
 	both a Unicode encoding and 'fileencoding' is not utf-8.  That's
 	because internally Unicode is always stored as utf-8.
@@ -3387,6 +3435,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.  That stops the option from working,
 	since changing the buffer text is not allowed.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 					*'formatoptions'* *'fo'*
 'formatoptions' 'fo'	string (Vim default: "tcq", Vi default: "vt")
@@ -3596,6 +3645,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 	On systems where 'guifontset' is supported (X11) and 'guifontset' is
 	not empty, then 'guifont' is not used.
 
+	Note: As to the GTK GUIs, no error is given against any invalid names,
+	and the first element of the list is always picked up and made use of.
+	This is because, instead of identifying a given name with a font, the
+	GTK GUIs use it to construct a pattern and try to look up a font which
+	best matches the pattern among available fonts, and this way, the
+	matching never fails.  An invalid name doesn't matter because a number
+	of font properties other than name will do to get the matching done.
+
 	Spaces after a comma are ignored.  To include a comma in a font name
 	precede it with a backslash.  Setting an option requires an extra
 	backslash before a space and a backslash.  See also
@@ -3618,7 +3675,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The font name depends on the GUI used.  See |setting-guifont| for a
 	way to set 'guifont' for various systems.
 
-	For the GTK+ 2 GUI the font name looks like this: >
+	For the GTK+ 2 and 3 GUIs, the font name looks like this: >
 	    :set guifont=Andale\ Mono\ 11
 <	That's all.  XLFDs are not used.  For Chinese this is reported to work
 	well: >
@@ -3627,13 +3684,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 	      set guifontwide=Microsoft\ Yahei\ 12,WenQuanYi\ Zen\ Hei\ 12
 	    endif
 <
+        (Replace gui_gtk2 with gui_gtk3 for the GTK+ 3 GUI)
+
 	For Mac OSX you can use something like this: >
 	    :set guifont=Monaco:h10
 <	Also see 'macatsui', it can help fix display problems.
 								*E236*
 	Note that the fonts must be mono-spaced (all characters have the same
-	width).  An exception is GTK 2: all fonts are accepted, but
-	mono-spaced fonts look best.
+	width).  An exception is GTK: all fonts are accepted, but mono-spaced
+	fonts look best.
 
 	To preview a font on X11, you might be able to use the "xfontsel"
 	program.  The "xlsfonts" program gives a list of all available fonts.
@@ -3671,7 +3730,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 			{only available when compiled with GUI enabled and
 			with the |+xfontset| feature}
-			{not available in the GTK+ 2 GUI}
+			{not available in the GTK+ GUI}
 	When not empty, specifies two (or more) fonts to be used.  The first
 	one for normal English, the second one for your special language.  See
 	|xfontset|.
@@ -3700,7 +3759,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Note: The size of these fonts must be exactly twice as wide as the one
 	specified with 'guifont' and the same height.
 
-	All GUI versions but GTK+ 2:
+	All GUI versions but GTK+:
 
 	'guifontwide' is only used when 'encoding' is set to "utf-8" and
 	'guifontset' is empty or invalid.
@@ -3708,7 +3767,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'guifontwide' is empty Vim will attempt to find a matching
 	double-width font and set 'guifontwide' to it.
 
-	GTK+ 2 GUI only:			*guifontwide_gtk2*
+	GTK+ GUI only:  		    	*guifontwide_gtk*
 
 	If set and valid, 'guifontwide' is always used for double width
 	characters, even if 'encoding' is not set to "utf-8".
@@ -4036,31 +4095,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 	define one.  The default uses a different group for each occasion.
 	See |highlight-default| for the default highlight groups.
 
-				 *'hlsearch'* *'hls'* *'nohlsearch'* *'nohls'*
-'hlsearch' 'hls'	boolean	(default off)
-			global
-			{not in Vi}
-			{not available when compiled without the
-			|+extra_search| feature}
-	When there is a previous search pattern, highlight all its matches.
-	The type of highlighting used can be set with the 'l' occasion in the
-	'highlight' option.  This uses the "Search" highlight group by
-	default.  Note that only the matching text is highlighted, any offsets
-	are not applied.
-	See also: 'incsearch' and |:match|.
-	When you get bored looking at the highlighted matches, you can turn it
-	off with |:nohlsearch|.  This does not change the option value, as
-	soon as you use a search command, the highlighting comes back.
-	'redrawtime' specifies the maximum time spent on finding matches.
-	When the search pattern can match an end-of-line, Vim will try to
-	highlight all of the matched text.  However, this depends on where the
-	search starts.  This will be the first line in the window or the first
-	line below a closed fold.  A match in a previous line which is not
-	drawn may not continue in a newly drawn line.
-	You can specify whether the highlight status is restored on startup
-	with the 'h' flag in 'viminfo' |viminfo-h|.
-	NOTE: This option is reset when 'compatible' is set.
-
 						*'history'* *'hi'*
 'history' 'hi'		number	(Vim default: 50, Vi default: 0,
 						 set to 200 in |defaults.vim|)
@@ -4093,6 +4127,31 @@ A jump table for the options with a short description can be found at |Q_op|.
 	When on, phonetic keyboard mapping is used.  'hkmap' must also be on.
 	This is useful if you have a non-Hebrew keyboard.
 	See |rileft.txt|.
+	NOTE: This option is reset when 'compatible' is set.
+
+				 *'hlsearch'* *'hls'* *'nohlsearch'* *'nohls'*
+'hlsearch' 'hls'	boolean	(default off)
+			global
+			{not in Vi}
+			{not available when compiled without the
+			|+extra_search| feature}
+	When there is a previous search pattern, highlight all its matches.
+	The type of highlighting used can be set with the 'l' occasion in the
+	'highlight' option.  This uses the "Search" highlight group by
+	default.  Note that only the matching text is highlighted, any offsets
+	are not applied.
+	See also: 'incsearch' and |:match|.
+	When you get bored looking at the highlighted matches, you can turn it
+	off with |:nohlsearch|.  This does not change the option value, as
+	soon as you use a search command, the highlighting comes back.
+	'redrawtime' specifies the maximum time spent on finding matches.
+	When the search pattern can match an end-of-line, Vim will try to
+	highlight all of the matched text.  However, this depends on where the
+	search starts.  This will be the first line in the window or the first
+	line below a closed fold.  A match in a previous line which is not
+	drawn may not continue in a newly drawn line.
+	You can specify whether the highlight status is restored on startup
+	with the 'h' flag in 'viminfo' |viminfo-h|.
 	NOTE: This option is reset when 'compatible' is set.
 
 						*'icon'* *'noicon'*
@@ -4374,7 +4433,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	Error messages will be suppressed, unless the 'debug' option contains
 	"msg".
 	See |indent-expression|.
-	NOTE: This option is made empty when 'compatible' is set.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.
@@ -4949,6 +5008,25 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
+					*'makeencoding'* *'menc'*
+'makeencoding' 'menc'	string	(default "")
+			global or local to buffer |global-local|
+			{only available when compiled with the |+multi_byte|
+			feature}
+			{not in Vi}
+	Encoding used for reading the output of external commands.  When empty,
+	encoding is not converted.
+	This is used for `:make`, `:lmake`, `:grep`, `:lgrep`, `:grepadd`,
+	`:lgrepadd`, `:cfile`, `:cgetfile`, `:caddfile`, `:lfile`, `:lgetfile`,
+	and `:laddfile`.
+
+	This would be mostly useful when you use MS-Windows and set 'encoding'
+	to "utf-8".  If |+iconv| is enabled and GNU libiconv is used, setting
+	'makeencoding' to "char" has the same effect as setting to the system
+	locale encoding.  Example: >
+		:set encoding=utf-8
+		:set makeencoding=char	" system locale is used
+<
 						*'makeprg'* *'mp'*
 'makeprg' 'mp'		string	(default "make", VMS: "MMS")
 			global or local to buffer |global-local|
@@ -5346,6 +5424,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			feature}
 	The number of milliseconds between polls for MzScheme threads.
 	Negative or zero value means no thread scheduling.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 							*'nrformats'* *'nf'*
 'nrformats' 'nf'	string	(default "bin,octal,hex",
@@ -5411,7 +5491,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	is set. Thus with the Vim default of 4 there is room for a line number
 	up to 999. When the buffer has 1000 lines five columns will be used.
 	The minimum value is 1, the maximum value is 10.
-	NOTE: 'numberwidth' is reset to 8 when 'compatible' is set.
+	NOTE: This option is set to the Vi default value when 'compatible' is
+	set and to the Vim default value when 'compatible' is reset.
 
 						*'omnifunc'* *'ofu'*
 'omnifunc' 'ofu'	string	(default: empty)
@@ -5651,7 +5732,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	a Tab.
 	NOTE: When using ">>" multiple times the resulting indent is a mix of
 	tabs and spaces.  You might not like this.
-	NOTE: 'preserveindent' is reset when 'compatible' is set.
+	NOTE: This option is reset when 'compatible' is set.
 	Also see 'copyindent'.
 	Use |:retab| to clean up white space.
 
@@ -5786,6 +5867,34 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Specifies the name of the Python 3 shared library. The default is
 	DYNAMIC_PYTHON3_DLL, which was specified at compile time.
 	Environment variables are expanded |:set_env|.
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
+
+						*'pyxversion'* *'pyx'*
+'pyxversion' 'pyx'	number	(default depends on the build)
+			global
+			{not in Vi}
+			{only available when compiled with the |+python| or
+			the |+python3| feature}
+	Specifies the python version used for pyx* functions and commands
+	|python_x|.  The default value is as follows:
+
+		Compiled with		     Default ~
+		|+python| and |+python3|	0
+		only |+python|			2
+		only |+python3|			3
+
+	Available values are 0, 2 and 3.
+	If 'pyxversion' is 0, it is set to 2 or 3 after the first execution of
+	any python2/3 commands or functions.  E.g. `:py` sets to 2, and `:py3`
+	sets to 3. `:pyx` sets it to 3 if Python 3 is available, otherwise sets
+	to 2 if Python 2 is available.
+	See also: |has-pythonx|
+
+	If Vim is compiled with only |+python| or |+python3| setting
+	'pyxversion' has no effect.  The pyx* functions and commands are
+	always the same as the compiled version.
+
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
@@ -6361,9 +6470,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 	"-f" is not inside the quotes, because it is not part of the command
 	name.  And Vim automagically recognizes the backslashes that are path
 	separators.
-	For Dos 32 bits (DJGPP), you can set the $DJSYSFLAGS environment
-	variable to change the way external commands are executed.  See the
-	libc.inf file of DJGPP.
 	Under MS-Windows, when the executable ends in ".com" it must be
 	included.  Thus setting the shell to "command.com" or "4dos.com"
 	works, but "command" and "4dos" do not work for all commands (e.g.,
@@ -6503,6 +6609,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'shelltemp' is off.
 	The `system()` function does not respect this option and always uses
 	temp files.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 						*'shelltype'* *'st'*
 'shelltype' 'st'	number	(default 0)
@@ -6819,7 +6927,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	mapping: ":inoremap # X^H#", where ^H is entered with CTRL-V CTRL-H.
 	When using the ">>" command, lines starting with '#' are not shifted
 	right.
-	NOTE: 'smartindent' is reset when 'compatible' is set.
+	NOTE: This option is reset when 'compatible' is set.
 	This option is reset when 'paste' is set and restored when 'paste' is
 	reset.
 
@@ -7007,7 +7115,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			word.  The expression must evaluate to a List of
 			Lists, each with a suggestion and a score.
 			Example:
-				[['the', 33], ['that', 44]]
+				[['the', 33], ['that', 44]] ~
 			Set 'verbose' and use |z=| to see the scores that the
 			internal methods use.  A lower score is better.
 			This may invoke |spellsuggest()| if you temporarily
@@ -7474,6 +7582,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   ignore	Ignore case
 	   match	Match case
 	   smart	Ignore case unless an upper case letter is used
+	NOTE: This option is set to the Vi default value when 'compatible' is
+	set and to the Vim default value when 'compatible' is reset.
 
 						*'taglength'* *'tl'*
 'taglength' 'tl'	number	(default 0)
@@ -7578,7 +7688,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	For further details see |arabic.txt|.
 
 					*'termencoding'* *'tenc'*
-'termencoding' 'tenc'	string	(default ""; with GTK+ 2 GUI: "utf-8"; with
+'termencoding' 'tenc'	string	(default ""; with GTK+ GUI: "utf-8"; with
 						    Macintosh GUI: "macroman")
 			global
 			{only available when compiled with the |+multi_byte|
@@ -7590,7 +7700,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	display).  Except for the Mac when 'macatsui' is off, then
 	'termencoding' should be "macroman".
 								*E617*
-	Note: This does not apply to the GTK+ 2 GUI.  After the GUI has been
+	Note: This does not apply to the GTK+ GUI.  After the GUI has been
 	successfully initialized, 'termencoding' is forcibly set to "utf-8".
 	Any attempts to set a different value will be rejected, and an error
 	message is shown.
@@ -7620,6 +7730,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	compatible terminal.
 	If setting this option does not work (produces a colorless UI)
 	reading |xterm-true-color| might help.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'terse'* *'noterse'*
 'terse'			boolean	(default off)
@@ -7873,7 +7984,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 'toolbariconsize' 'tbis'	string	(default "small")
 				global
 				{not in Vi}
-				{only in the GTK+ 2 GUI}
+				{only in the GTK+ GUI}
 	Controls the size of toolbar icons.  The possible values are:
 		tiny		Use tiny icons.
 		small		Use small icons (default).
@@ -8030,6 +8141,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The undo file is not read when 'undoreload' causes the buffer from
 	before a reload to be saved for undo.
 	When 'undofile' is turned off the undo file is NOT deleted.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'undolevels'* *'ul'*
 'undolevels' 'ul'	number	(default 100, 1000 for Unix, VMS,
@@ -8285,6 +8397,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 					    *'virtualedit'* *'ve'*
 'virtualedit' 've'	string	(default "")
@@ -8313,6 +8427,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The `g$` command will move to the end of the screen line.
 	It doesn't make sense to combine "all" with "onemore", but you will
 	not get a warning for it.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 			*'visualbell'* *'vb'* *'novisualbell'* *'novb'* *beep*
 'visualbell' 'vb'	boolean	(default off)

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 8.0.  Last change: 2016 Sep 11
+*pattern.txt*   For Vim version 8.0.  Last change: 2017 Mar 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -869,10 +869,13 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%V	Match inside the Visual area.  When Visual mode has already been
 	stopped match in the area that |gv| would reselect.
 	This is a |/zero-width| match.  To make sure the whole pattern is
-	inside the Visual area put it at the start and end of the pattern,
-	e.g.: >
+	inside the Visual area put it at the start and just before the end of
+	the pattern, e.g.: >
+		/\%Vfoo.*ba\%Vr
+<	This also works if only "foo bar" was Visually selected. This: >
 		/\%Vfoo.*bar\%V
-<	Only works for the current buffer.
+<	would match "foo bar" if the Visual selection continues after the "r".
+	Only works for the current buffer.
 
 						*/\%#* *cursor-position*
 \%#	Matches with the cursor position.  Only works when matching in a

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 8.0.  Last change: 2016 Nov 04
+*quickfix.txt*  For Vim version 8.0.  Last change: 2017 Mar 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -45,10 +45,13 @@ The 'errorformat' option should be set to match the error messages from your
 compiler (see |errorformat| below).
 
 						*location-list* *E776*
-A location list is similar to a quickfix list and contains a list of positions
-in files.  A location list is associated with a window and each window can
-have a separate location list.  A location list can be associated with only
-one window.  The location list is independent of the quickfix list.
+A location list is a window-local quickfix list. You get one after commands
+like `:lvimgrep`, `:lgrep`, `:lhelpgrep`, `:lmake`, etc., which create a
+location list instead of a quickfix list as the corresponding `:vimgrep`,
+`:grep`, `:helpgrep`, `:make` do.
+A location list is associated with a window and each window can have a
+separate location list.  A location list can be associated with only one
+window.  The location list is independent of the quickfix list.
 
 When a window with a location list is split, the new window gets a copy of the
 location list.  When there are no longer any references to a location list,
@@ -164,6 +167,9 @@ processing a quickfix or location list command, it will be aborted.
 			keep Vim running while compiling.  If you give the
 			name of the errorfile, the 'errorfile' option will
 			be set to [errorfile].  See |:cc| for [!].
+			If the encoding of the error file differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							*:lf* *:lfile*
 :lf[ile][!] [errorfile]	Same as ":cfile", except the location list for the
@@ -175,6 +181,9 @@ processing a quickfix or location list command, it will be aborted.
 :cg[etfile] [errorfile]					*:cg* *:cgetfile*
 			Read the error file.  Just like ":cfile" but don't
 			jump to the first error.
+			If the encoding of the error file differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 
 :lg[etfile] [errorfile]					*:lg* *:lgetfile*
@@ -185,6 +194,9 @@ processing a quickfix or location list command, it will be aborted.
 :caddf[ile] [errorfile]	Read the error file and add the errors from the
 			errorfile to the current quickfix list. If a quickfix
 			list is not present, then a new list is created.
+			If the encoding of the error file differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							*:laddf* *:laddfile*
 :laddf[ile] [errorfile]	Same as ":caddfile", except the location list for the
@@ -320,6 +332,7 @@ use this code: >
 	endfunction
 
 	au QuickfixCmdPost make call QfMakeConv()
+Another option is using 'makeencoding'.
 
 
 EXECUTE A COMMAND IN ALL THE BUFFERS IN QUICKFIX OR LOCATION LIST:
@@ -586,6 +599,9 @@ lists, use ":cnewer 99" first.
 			   like |:cnext| and |:cprevious|, see above.
 			This command does not accept a comment, any "
 			characters are considered part of the arguments.
+			If the encoding of the program output differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							*:lmak* *:lmake*
 :lmak[e][!] [arguments]
@@ -645,6 +661,7 @@ read the error messages: >
 	au QuickfixCmdPost make call QfMakeConv()
 
 (Example by Faque Cheng)
+Another option is using 'makeencoding'.
 
 ==============================================================================
 5. Using :vimgrep and :grep				*grep* *lid*
@@ -759,6 +776,9 @@ id-utils) in a similar way to its compiler integration (see |:make| above).
 			When 'grepprg' is "internal" this works like
 			|:vimgrep|.  Note that the pattern needs to be
 			enclosed in separator characters then.
+			If the encoding of the program output differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							    *:lgr* *:lgrep*
 :lgr[ep][!] [arguments]	Same as ":grep", except the location list for the
@@ -783,6 +803,10 @@ id-utils) in a similar way to its compiler integration (see |:make| above).
 				  \ | catch /E480:/
 				  \ | endtry"
 <
+			If the encoding of the program output differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
+
 							*:lgrepa* *:lgrepadd*
 :lgrepa[dd][!] [arguments]
 			Same as ":grepadd", except the location list for the
@@ -1399,7 +1423,7 @@ prints information about entering a directory in the form "Making all in dir".
    Making all in dir2		  ./dir1/dir2
 
    This can be solved by printing absolute directories in the "enter directory"
-   message or by printing "leave directory" messages..
+   message or by printing "leave directory" messages.
 
 To avoid this problem, ensure to print absolute directory names and "leave
 directory" messages.

runtime/doc/quickref.txt

@@ -782,6 +782,7 @@ Short explanation of each option:		*option-list*
 'macatsui'		    Mac GUI: use ATSUI text drawing
 'magic'			    changes special characters in search patterns
 'makeef'	  'mef'     name of the errorfile for ":make"
+'makeencoding'	  'menc'    encoding of external make/grep commands
 'makeprg'	  'mp'	    program to use for the ":make" command
 'matchpairs'	  'mps'     pairs of characters that "%" can match
 'matchtime'	  'mat'     tenths of a second to show matching paren
@@ -835,6 +836,7 @@ Short explanation of each option:		*option-list*
 'pumheight'	  'ph'	    maximum height of the popup menu
 'pythondll'		    name of the Python 2 dynamic library
 'pythonthreedll'	    name of the Python 3 dynamic library
+'pyxversion'	  'pyx'	    Python version used for pyx* commands
 'quoteescape'	  'qe'	    escape characters used in a string
 'readonly'	  'ro'	    disallow writing the buffer
 'redrawtime'	  'rdt'     timeout for 'hlsearch' and |:match| highlighting

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 8.0.  Last change: 2016 Sep 11
+*repeat.txt*    For Vim version 8.0.  Last change: 2017 Feb 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -305,6 +305,11 @@ For writing a Vim script, see chapter 41 of the user manual |usr_41.txt|.
 			Mark) in utf-8 format Vim will recognize it, no need
 			to use ":scriptencoding utf-8" then.
 
+			If you set the 'encoding' option in your |.vimrc|,
+			`:scriptencoding` must be placed after that. E.g.: >
+				set encoding=utf-8
+				scriptencoding utf-8
+<
 			When compiled without the |+multi_byte| feature this
 			command is ignored.
 			{not in Vi}

runtime/doc/scroll.txt

@@ -221,7 +221,7 @@ past its buffer's limits.
 However, if a 'scrollbind' window that has a relative offset that is past its
 buffer's limits is given the cursor focus, the other 'scrollbind' windows must
 jump to a location where the current window's relative offset is valid.  This
-behavior can be changed by clearing the 'jump' flag from the 'scrollopt'
+behavior can be changed by clearing the "jump" flag from the 'scrollopt'
 option.
 
 						*syncbind* *:syncbind* *:sync*

runtime/doc/syntax.txt

@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 8.0.  Last change: 2016 Oct 30
+*syntax.txt*	For Vim version 8.0.  Last change: 2017 Feb 06
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1476,7 +1476,7 @@ algorithm should work in the vast majority of cases.  In some cases, such as a
 file that begins with 500 or more full-line comments, the script may
 incorrectly decide that the fortran code is in fixed form.  If that happens,
 just add a non-comment statement beginning anywhere in the first five columns
-of the first twenty five lines, save (:w) and then reload (:e!) the file.
+of the first twenty-five lines, save (:w) and then reload (:e!) the file.
 
 Tabs in fortran files ~
 Tabs are not recognized by the Fortran standards.  Tabs are not a good idea in
@@ -2646,9 +2646,9 @@ later, and part earlier) adds.
 
 RESTRUCTURED TEXT			*rst.vim* *ft-rst-syntax*
 
-You may set what syntax definitions should be used for code blocks via
+You may set what syntax definitions should be used for code blocks via >
 	let rst_syntax_code_list = ['vim', 'lisp', ...]
-
+<
 
 REXX						*rexx.vim* *ft-rexx-syntax*
 
@@ -2933,6 +2933,13 @@ reduce this, the "sh_maxlines" internal variable can be set.  Example: >
 The default is to use the twice sh_minlines.  Set it to a smaller number to
 speed up displaying.  The disadvantage is that highlight errors may appear.
 
+syntax/sh.vim tries to flag certain problems as errors; usually things like
+extra ']'s, 'done's, 'fi's, etc.  If you find the error handling problematic
+for your purposes, you may suppress such error highlighting by putting
+the following line in your .vimrc: >
+
+	let g:sh_no_error= 1
+<
 
 						*sh-embed*  *sh-awk*
  Sh: EMBEDDING LANGUAGES~
@@ -3235,11 +3242,11 @@ syntax highlighting script handles this with the following logic:
 	* If g:tex_stylish exists and is 1
 		then the file will be treated as a "sty" file, so the "_"
 		will be allowed as part of keywords
-		(irregardless of g:tex_isk)
+		(regardless of g:tex_isk)
 	* Else if the file's suffix is sty, cls, clo, dtx, or ltx,
 		then the file will be treated as a "sty" file, so the "_"
 		will be allowed as part of keywords
-		(irregardless of g:tex_isk)
+		(regardless of g:tex_isk)
 
 	* If g:tex_isk exists, then it will be used for the local 'iskeyword'
 	* Else the local 'iskeyword' will be set to 48-57,a-z,A-Z,192-255
@@ -3320,8 +3327,8 @@ Some folding is now supported with syntax/vim.vim: >
    g:vimsyn_folding =~ 't' : fold tcl      script
 <
 							*g:vimsyn_noerror*
-Not all error highlighting that syntax/vim.vim does may be correct; VimL is a
-difficult language to highlight correctly.  A way to suppress error
+Not all error highlighting that syntax/vim.vim does may be correct; Vim script
+is a difficult language to highlight correctly.  A way to suppress error
 highlighting is to put the following line in your |vimrc|: >
 
 	let g:vimsyn_noerror = 1
@@ -3479,6 +3486,8 @@ DEFINING CASE						*:syn-case* *E390*
 	"ignore".  Note that any items before this are not affected, and all
 	items until the next ":syntax case" command are affected.
 
+:sy[ntax] case
+	Show either "syntax case match" or "syntax case ignore" (translated).
 
 SPELL CHECKING						*:syn-spell*
 
@@ -3496,6 +3505,11 @@ SPELL CHECKING						*:syn-spell*
 
 	To activate spell checking the 'spell' option must be set.
 
+:sy[ntax] spell
+	Show either "syntax spell toplevel", "syntax spell notoplevel" or
+	"syntax spell default" (translated).
+
+
 SYNTAX ISKEYWORD SETTING				*:syn-iskeyword*
 
 :sy[ntax] iskeyword [clear | {option}]
@@ -4089,6 +4103,9 @@ IMPLICIT CONCEAL					*:syn-conceal-implicit*
 	off" returns to the normal state where the "conceal" flag must be
 	given explicitly.
 
+:sy[ntax] conceal
+	Show either "syntax conceal on" or "syntax conceal off" (translated).
+
 ==============================================================================
 7. Syntax patterns				*:syn-pattern* *E401* *E402*
 

runtime/doc/tabpage.txt

@@ -139,6 +139,10 @@ something else.
 		    :+tabclose	    " close the next tab page
 		    :1tabclose	    " close the first tab page
 		    :$tabclose	    " close the last tab page
+		    :tabclose -2    " close the two previous tab page
+		    :tabclose +	    " close the next tab page
+		    :tabclose 3	    " close the third tab page
+		    :tabclose $	    " close the last tab page
 <
 							*:tabo* *:tabonly*
 :tabo[nly][!]	Close all other tab pages.
@@ -153,13 +157,20 @@ something else.
 				    " one
 
 :{count}tabo[nly][!]
-		Close all tab pages except the {count}th one. >
+:tabo[nly][!] {count}
+		Close all tab pages except {count} one. >
 		    :.tabonly	    " as above
 		    :-tabonly	    " close all tab pages except the previous
 				    " one
 		    :+tabonly	    " close all tab pages except the next one
 		    :1tabonly	    " close all tab pages except the first one
 		    :$tabonly	    " close all tab pages except the last one
+		    :tabonly -	    " close all tab pages except the previous
+				    " one
+		    :tabonly +2     " close all tab pages except the two next
+				    " one
+		    :tabonly 1	    " close all tab pages except the first one
+		    :tabonly $	    " close all tab pages except the last one
 
 
 SWITCHING TO ANOTHER TAB PAGE:
@@ -174,7 +185,20 @@ gt					*i_CTRL-<PageDown>* *i_<C-PageDown>*
 		Go to the next tab page.  Wraps around from the last to the
 		first one.
 
+:{count}tabn[ext]
 :tabn[ext] {count}
+		Go to tab page {count}.  The first tab page has number one. >
+		    :-tabnext	" go to the previous tab page
+		    :+tabnext	" go to the next tab page
+		    :+2tabnext	" go to the two next tab page
+		    :1tabnext	" go to the first tab page
+		    :$tabnext	" go to the last tab page
+		    :tabnext $	" as above
+		    :tabnext -	" go to the previous tab page
+		    :tabnext -1	" as above
+		    :tabnext +	" go to the next tab page
+		    :tabnext +1	" as above
+
 {count}<C-PageDown>
 {count}gt	Go to tab page {count}.  The first tab page has number one.
 

runtime/doc/tags

@@ -427,6 +427,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'macatsui'	options.txt	/*'macatsui'*
 'magic'	options.txt	/*'magic'*
 'makeef'	options.txt	/*'makeef'*
+'makeencoding'	options.txt	/*'makeencoding'*
 'makeprg'	options.txt	/*'makeprg'*
 'mat'	options.txt	/*'mat'*
 'matchpairs'	options.txt	/*'matchpairs'*
@@ -439,6 +440,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'maxmemtot'	options.txt	/*'maxmemtot'*
 'mco'	options.txt	/*'mco'*
 'mef'	options.txt	/*'mef'*
+'menc'	options.txt	/*'menc'*
 'menuitems'	options.txt	/*'menuitems'*
 'mesg'	vi_diff.txt	/*'mesg'*
 'mfd'	options.txt	/*'mfd'*
@@ -774,6 +776,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'pvw'	options.txt	/*'pvw'*
 'pythondll'	options.txt	/*'pythondll'*
 'pythonthreedll'	options.txt	/*'pythonthreedll'*
+'pyx'	options.txt	/*'pyx'*
+'pyxversion'	options.txt	/*'pyxversion'*
 'qe'	options.txt	/*'qe'*
 'quote	motion.txt	/*'quote*
 'quoteescape'	options.txt	/*'quoteescape'*
@@ -923,6 +927,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 't_AB'	term.txt	/*'t_AB'*
 't_AF'	term.txt	/*'t_AF'*
 't_AL'	term.txt	/*'t_AL'*
+'t_BD'	term.txt	/*'t_BD'*
+'t_BE'	term.txt	/*'t_BE'*
 't_CS'	term.txt	/*'t_CS'*
 't_CV'	term.txt	/*'t_CV'*
 't_Ce'	term.txt	/*'t_Ce'*
@@ -961,6 +967,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 't_KJ'	term.txt	/*'t_KJ'*
 't_KK'	term.txt	/*'t_KK'*
 't_KL'	term.txt	/*'t_KL'*
+'t_PE'	term.txt	/*'t_PE'*
+'t_PS'	term.txt	/*'t_PS'*
 't_RB'	term.txt	/*'t_RB'*
 't_RI'	term.txt	/*'t_RI'*
 't_RV'	term.txt	/*'t_RV'*
@@ -2722,6 +2730,10 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :pyfile	if_pyth.txt	/*:pyfile*
 :python	if_pyth.txt	/*:python*
 :python3	if_pyth.txt	/*:python3*
+:pythonx	if_pyth.txt	/*:pythonx*
+:pyx	if_pyth.txt	/*:pyx*
+:pyxdo	if_pyth.txt	/*:pyxdo*
+:pyxfile	if_pyth.txt	/*:pyxfile*
 :q	editing.txt	/*:q*
 :qa	editing.txt	/*:qa*
 :qall	editing.txt	/*:qall*
@@ -4490,7 +4502,9 @@ E935	eval.txt	/*E935*
 E936	autocmd.txt	/*E936*
 E937	autocmd.txt	/*E937*
 E938	eval.txt	/*E938*
+E939	change.txt	/*E939*
 E94	windows.txt	/*E94*
+E940	eval.txt	/*E940*
 E95	message.txt	/*E95*
 E96	diff.txt	/*E96*
 E97	diff.txt	/*E97*
@@ -4770,6 +4784,8 @@ W16	message.txt	/*W16*
 W17	arabic.txt	/*W17*
 W18	syntax.txt	/*W18*
 W19	autocmd.txt	/*W19*
+W20	if_pyth.txt	/*W20*
+W21	if_pyth.txt	/*W21*
 WORD	motion.txt	/*WORD*
 WWW	intro.txt	/*WWW*
 Win32	os_win32.txt	/*Win32*
@@ -5060,6 +5076,7 @@ backup-changed	version4.txt	/*backup-changed*
 backup-extension	version4.txt	/*backup-extension*
 backup-table	editing.txt	/*backup-table*
 balloon-eval	debugger.txt	/*balloon-eval*
+balloon_show()	eval.txt	/*balloon_show()*
 bar	motion.txt	/*bar*
 bars	help.txt	/*bars*
 base_font_name_list	mbyte.txt	/*base_font_name_list*
@@ -5333,6 +5350,7 @@ cino-:	indent.txt	/*cino-:*
 cino-=	indent.txt	/*cino-=*
 cino->	indent.txt	/*cino->*
 cino-C	indent.txt	/*cino-C*
+cino-E	indent.txt	/*cino-E*
 cino-J	indent.txt	/*cino-J*
 cino-L	indent.txt	/*cino-L*
 cino-M	indent.txt	/*cino-M*
@@ -6578,7 +6596,7 @@ gui-x11-various	gui_x11.txt	/*gui-x11-various*
 gui.txt	gui.txt	/*gui.txt*
 gui_w32.txt	gui_w32.txt	/*gui_w32.txt*
 gui_x11.txt	gui_x11.txt	/*gui_x11.txt*
-guifontwide_gtk2	options.txt	/*guifontwide_gtk2*
+guifontwide_gtk	options.txt	/*guifontwide_gtk*
 guifontwide_win_mbyte	options.txt	/*guifontwide_win_mbyte*
 guioptions_a	options.txt	/*guioptions_a*
 guu	change.txt	/*guu*
@@ -6603,6 +6621,7 @@ hangulin.txt	hangulin.txt	/*hangulin.txt*
 has()	eval.txt	/*has()*
 has-patch	eval.txt	/*has-patch*
 has-python	if_pyth.txt	/*has-python*
+has-pythonx	if_pyth.txt	/*has-pythonx*
 has_key()	eval.txt	/*has_key()*
 haskell.vim	syntax.txt	/*haskell.vim*
 haslocaldir()	eval.txt	/*haslocaldir()*
@@ -7871,6 +7890,7 @@ python-bindeval	if_pyth.txt	/*python-bindeval*
 python-bindeval-objects	if_pyth.txt	/*python-bindeval-objects*
 python-buffer	if_pyth.txt	/*python-buffer*
 python-buffers	if_pyth.txt	/*python-buffers*
+python-building	if_pyth.txt	/*python-building*
 python-chdir	if_pyth.txt	/*python-chdir*
 python-command	if_pyth.txt	/*python-command*
 python-commands	if_pyth.txt	/*python-commands*
@@ -7901,7 +7921,11 @@ python.vim	syntax.txt	/*python.vim*
 python2-directory	if_pyth.txt	/*python2-directory*
 python3	if_pyth.txt	/*python3*
 python3-directory	if_pyth.txt	/*python3-directory*
+python_x	if_pyth.txt	/*python_x*
+python_x-special-comments	if_pyth.txt	/*python_x-special-comments*
+pythonx	if_pyth.txt	/*pythonx*
 pythonx-directory	if_pyth.txt	/*pythonx-directory*
+pyxeval()	eval.txt	/*pyxeval()*
 q	repeat.txt	/*q*
 q/	cmdline.txt	/*q\/*
 q:	cmdline.txt	/*q:*
@@ -8443,6 +8467,8 @@ t_@7	term.txt	/*t_@7*
 t_AB	term.txt	/*t_AB*
 t_AF	term.txt	/*t_AF*
 t_AL	term.txt	/*t_AL*
+t_BD	term.txt	/*t_BD*
+t_BE	term.txt	/*t_BE*
 t_CS	term.txt	/*t_CS*
 t_CV	term.txt	/*t_CV*
 t_Ce	term.txt	/*t_Ce*
@@ -8481,6 +8507,8 @@ t_KI	term.txt	/*t_KI*
 t_KJ	term.txt	/*t_KJ*
 t_KK	term.txt	/*t_KK*
 t_KL	term.txt	/*t_KL*
+t_PE	term.txt	/*t_PE*
+t_PS	term.txt	/*t_PS*
 t_RB	term.txt	/*t_RB*
 t_RI	term.txt	/*t_RI*
 t_RV	term.txt	/*t_RV*
@@ -8712,20 +8740,23 @@ termcap-options	term.txt	/*termcap-options*
 termcap-title	term.txt	/*termcap-title*
 terminal-colors	os_unix.txt	/*terminal-colors*
 terminal-info	term.txt	/*terminal-info*
+terminal-key-codes	term.txt	/*terminal-key-codes*
 terminal-options	term.txt	/*terminal-options*
+terminal-output-codes	term.txt	/*terminal-output-codes*
 terminfo	term.txt	/*terminfo*
 termresponse-variable	eval.txt	/*termresponse-variable*
 test-functions	usr_41.txt	/*test-functions*
 test_alloc_fail()	eval.txt	/*test_alloc_fail()*
 test_autochdir()	eval.txt	/*test_autochdir()*
-test_disable_char_avail()	eval.txt	/*test_disable_char_avail()*
 test_garbagecollect_now()	eval.txt	/*test_garbagecollect_now()*
+test_ignore_error()	eval.txt	/*test_ignore_error()*
 test_null_channel()	eval.txt	/*test_null_channel()*
 test_null_dict()	eval.txt	/*test_null_dict()*
 test_null_job()	eval.txt	/*test_null_job()*
 test_null_list()	eval.txt	/*test_null_list()*
 test_null_partial()	eval.txt	/*test_null_partial()*
 test_null_string()	eval.txt	/*test_null_string()*
+test_override()	eval.txt	/*test_override()*
 test_settime()	eval.txt	/*test_settime()*
 testing	eval.txt	/*testing*
 testing-variable	eval.txt	/*testing-variable*
@@ -9332,6 +9363,7 @@ xterm-8-bit	term.txt	/*xterm-8-bit*
 xterm-8bit	term.txt	/*xterm-8bit*
 xterm-blink	syntax.txt	/*xterm-blink*
 xterm-blinking-cursor	syntax.txt	/*xterm-blinking-cursor*
+xterm-bracketed-paste	term.txt	/*xterm-bracketed-paste*
 xterm-clipboard	term.txt	/*xterm-clipboard*
 xterm-codes	term.txt	/*xterm-codes*
 xterm-color	syntax.txt	/*xterm-color*

runtime/doc/term.txt

@@ -1,4 +1,4 @@
-*term.txt*      For Vim version 8.0.  Last change: 2016 Sep 02
+*term.txt*      For Vim version 8.0.  Last change: 2017 Feb 02
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -95,11 +95,21 @@ terminal when entering "raw" mode and 't_BD' when leaving "raw" mode.  The
 terminal is then expected to put 't_PS' before pasted text and 't_PE' after
 pasted text.  This way Vim can separate text that is pasted from characters
 that are typed.  The pasted text is handled like when the middle mouse button
-is used.
+is used, it is inserted literally and not interpreted as commands.
+
+When the cursor is in the first column, the pasted text will be inserted
+before it.  Otherwise the pasted text is appended after the cursor position.
+This means one cannot paste after the first column.  Unfortunately Vim does
+not have a way to tell where the mouse pointer was.
 
 Note that in some situations Vim will not recognize the bracketed paste and
 you will get the raw text.  In other situations Vim will only get the first
-pasted character and drop the rest, e.g. when using the "r" command.
+pasted character and drop the rest, e.g. when using the "r" command.  If you
+have a problem with this, disable bracketed paste by putting this in your
+.vimrc: >
+	set t_BE=
+If this is done while Vim is running the 't_BD' will be sent to the terminal
+to disable bracketed paste.
 
 							*cs7-problem*
 Note: If the terminal settings are changed after running Vim, you might have
@@ -242,7 +252,7 @@ But any non-empty string means that the flag is set.  An empty string means
 that the flag is not set.  't_CS' works like this too, but it isn't a termcap
 flag.
 
-OUTPUT CODES
+OUTPUT CODES						*terminal-output-codes*
 	option	meaning	~
 
 	t_AB	set background color (ANSI)			*t_AB* *'t_AB'*
@@ -323,7 +333,7 @@ Added by Vim (there are no standard codes for these):
 	t_BD	disable bracketed paste mode			*t_BD* *'t_BD'*
 		|xterm-bracketed-paste|
 
-KEY CODES
+KEY CODES						*terminal-key-codes*
 Note: Use the <> form if possible
 
 	option	name		meaning	~
@@ -414,8 +424,9 @@ Note: Use the <> form if possible
 	t_KK	<k8>		keypad 8		 *<k8>*	*t_KK* *'t_KK'*
 	t_KL	<k9>		keypad 9		 *<k9>*	*t_KL* *'t_KL'*
 		<Mouse>		leader of mouse code		*<Mouse>*
-	t_PS	start of brackted paste |xterm-bracketed-paste|   *t_PS* 't_PS'
-	t_PE	end of bracketed paste |xterm-bracketed-paste|    *t_PE* 't_PE'
+								*t_PS* *'t_PS'*
+	t_PS	start of bracketed paste |xterm-bracketed-paste|
+	t_PE	end of bracketed paste |xterm-bracketed-paste|  *t_PE* *'t_PE'*
 
 Note about t_so and t_mr: When the termcap entry "so" is not present the
 entry for "mr" is used.  And vice versa.  The same is done for "se" and "me".

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.0.  Last change: 2017 Jan 16
+*todo.txt*      For Vim version 8.0.  Last change: 2017 Mar 16
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -35,7 +35,11 @@ entered there will not be repeated below, unless there is extra information.
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-get_syn_options() does not respect skip in else part. (Zyx)
+Using "g<" after ":for x in [1,2,3]|echom x|endfor" looks wrong. (Marcin
+Szamotulski, 2017 Mar 12)
+Also, using Ctrl-C clears the last part.
+
+Test 45 fails on MS-Windows only before resetting 'sw'. Why?
 
 +channel:
 - Try out background make plugin: 
@@ -60,6 +64,7 @@ get_syn_options() does not respect skip in else part. (Zyx)
   connecting in the main loop with zero timeout.
 - job_start(): run job in a newly opened terminal.
     With xterm could use -S{pty}.
+    Although user could use "xterm -e 'cmd arg'".
 
 Regexp problems:
 - Since 7.4.704 the old regex engine fails to match [[:print:]] in 0xf6.
@@ -106,89 +111,103 @@ Regexp problems:
 - Difference between two engines: ".*\zs\/\@>\/" on text "///"
   (Chris Paul, 2016 Nov 13)  New engine not greedy enough?
 
-'] mark invalid after undoing insert "hello".
+Running test_gui and test_gui_init with Motif sometimes kills the window
+manager.  Problem with Motif?
 
-Make html indent file use javascript indent, now that it's not just cindent.
-#1220
+Memory leak in test97?  The string is actually freed.  Weird.
 
-Concatenation with null string causes an error: 'a'[1:0] .. 'b'
-Might as well handle it like an empty string.
+Include rust files.  Got all permissions?
 
-When using symbolic links, a package path will not be inserted at the right
-position in 'runtimepath'. (Dugan Chen, 2016 Nov 18)
+dict_add_list and dict_add_dict may free item when failing. (2017 Mar 12,
+Nikolai Pavlov, #1555)
+
+Patch to add buffer name argument to taglist().
+Ordering of tags in result of taglist call. (Duncan McDougall, #1194)
+
+Add a toolbar in the terminal.  Can be global, above all windows, or specific
+for one window.
+Use tb_set(winid, [{'text': 'stop', 'cb': callback, 'hi': 'Green'}])
+    tb_highlight(winid, 'ToolBar')
+    tb_get(winid)
 
 json_encode(): should convert to utf-8. (Nikolai Pavlov, 2016 Jan 23)
 What if there is an invalid character?
 
-Include rust files. (Klabnik, #1356)
-
-Allow using json with empty key?  Dict already has it.
-
 Json string with trailing \u should be an error. (Lcd)
 
-Patch to deal with changed configure events in GTK 3. (Jan Alexander Steffens,
-2016 Oct 23 #1193)
-Remarks from nuko8, 2016 Nov 2.
+On MS-Windows with 'clipboard' set to "unnamed" this doesn't work to double
+lines: :g/^/normal yyp   On Unix it works OK.  (Bryce Orgill, 2016 Nov 5)
+Another example 2017 Mar 10.
 
 Multi-byte bug: dv} splits char. (Urtica Dioica, 2017 Jan 9)
 
-Patch to change order of compiler flags. (Yousong Zhou, 2016 Sep 19, #1100)
-
-Patch to add command line completion for :cexpr commands. (Yegappan
-Lakshmanan, 2016 Dec 13)
-
-Patch for :pyx, run python commands depending on the supported version.
-(Marc Weber, update from Ken Takata, 2016 Sep 19, 2017 Jan 6)
-
-Patch to avoid warnings for overflow. (Mike Williams, 2016 Dec 16)
-Update Dec 19.
+When session file has name in argument list but the buffer was deleted, the
+buffer is not deleted when using the session file. (#1393)
+Should add the buffer in hidden state.
 
 When an item in the quickfix list has a file name that does not exist, behave
 like the item was not a match for :cnext.
 
+Patch to test regexp classes. (Dominique, 2017 Mar 13, #1560)
+Do we need to adjust the implementation?
+Make different classes that depend on the system and that don't.
+
 Wrong diff highlighting with three files. (2016 Oct 20, #1186)
 Also get E749 on exit.
 Another example in #1309
 
-Patch to fix vim_iswordp() works differently on chars <256 that are two bytes.
-Ozaki Kiichi, 2016 Dec 11.
+Patch to change all use of &sw to shiftwidth(). (Tyru, 2017 Feb 19)
+Wait until maintainers integrate it.
+
+Completion for user-defined commands does not work if a few characters were
+already typed. (Dominique, 2017 Jan 26)
 
 When deleting a mark or register, leave a tombstone, so that it's also deleted
 when writing viminfo (and the delete was the most recent action). #1339
 
-Relevant neovim patch:
-https://github.com/neovim/neovim/pull/5717
-test case: 
-https://github.com/neovim/neovim/pull/5717#issuecomment-264845481
-Others:
-https://github.com/neovim/neovim/issues/5713#issuecomment-265136186
-https://github.com/neovim/neovim/pull/5737#issuecomment-266055165
-
-Patch for better explanation of 'compatible' side effects.
-https://github.com/vim/vim/pull/1161/files
-
-Patch to add 'makeencoding', useful when the system encoding differs from
-Vim's 'encoding' setting. (Ken Takata, 2017 Jan 6)
-
-Patch to adjust marks when adding a new line to the end of buffer in diff
-mode. (James McCoy, 2016 Dec 14, #1329)
-
 Suggestion to improve pt-br spell checking. (Marcelo D Montu, 2016 Dec 15,
 #1330)
 
 Error in test_startup_utf8 on Solaris. (Danek Duvall, 2016 Aug 17)
 
+Completion for :!cmd shows each match twice. #1435
+
+GTK: When adding a timer from 'balloonexpr' it won't fire, because
+g_main_context_iteration() doesn't return.  Need to trigger an event when the
+timer expires.
+
+Screen update bug related to matchparen.  (Chris Heath, 2017 Mar 4, #1532)
+
 Rule to use "^" for statusline does not work if a space is defined with
 highlighting for both stl and stlnc.  Patch by Ken Hamada (itchyny, 2016 Dec 11)
 
 8   "stl" and "stlnc" in 'fillchars' don't work for multi-byte characters.
     Patch by Christian Wellenbrock, 2013 Jul 5.
 
+Using CTRL-G_U in InsertCharPre causes trouble for redo. (Israel Chauca
+Fuentes, 2017 Feb 12, #1470)
+
+Check for errors E704 and E705 only does VAR_FUNC, should also do VAR_PARTIAL.
+(Nikolai Pavlov, 2017 Mar 13, #1557)
+Make a function to check for function-like type?
+
 Screen updated delayed when using CTRL-O u in Insert mode.
 (Barlik, #1191)  Perhaps because status message?
 
-Patch to add buffer name argument to taglist().
-Ordering of tags in result of taglist call. (Duncan McDougall, #1194)
+Implement optional arguments for functions.
+    func Foo(start, count = 1 all = 1)
+    call Foo(12)
+    call Foo(12, all = 0)
+    call Foo(12, 15, 0)
+
+writefile() does not abort as soon as an error is found. (Nikolai Pavlov,
+2017 Feb 14, #1476)
+
+Patch to support on-the-spot and over-the-spot input method. (Ken Takata, 2017
+Feb 14).
+
+Add a command to take a range of lines, filter them and put the output
+somewhere else.  :{range}copy {dest} !cmd
 
 Patch to fix that empty first tab is not in session.
 (Hirohito Higashi, 2016 Nov 25, #1282)
@@ -199,6 +218,13 @@ Patch for restoring wide characters in the console buffer.
 Patch to fix escaping of job arguments. (Yasuhiro Matsumoto, 2016 Oct 5)
 Update Oct 14: https://gist.github.com/mattn/d47e7d3bfe5ade4be86062b565a4bfca
 
+The TermResponse event is not triggered when a plugin has set 'eventignore' to
+"all".  Netrw does this. (Gary Johnson, 2017 Jan 24)
+Postpone the event until 'eventignore' is reset.
+
+Patch to make urxvt mouse work better, recognize Esc[*M termcap code.
+(Maurice Bos, 2017 Feb 17, #1486)
+
 Once .exe with updated installer is available: Add remark to download page
 about /S and /D options (Ken Takata, 2016 Apr 13)
 Or point to nightly builds: https://github.com/vim/vim-win32-installer/releases
@@ -206,23 +232,35 @@ Or point to nightly builds: https://github.com/vim/vim-win32-installer/releases
 Problem passing non-UTF-8 strings to Python 3. (Björn Linse, 2016 Sep 11,
 #1053)  With patch, does it work?
 
+Using --remote to open a file in which a # appears does not work on
+MS-Windows.  Perhaps in \#  the \ is seen as a path separator. (Axel Bender,
+2017 Feb 9)  Can we expand wildcards first and send the path literally to the
+receiving Vim?  Or make an exception for #, it's not useful remotely.
+
+":sbr" docs state it respect 'switchbuf', but "vsplit" does not cause a
+vertical split. (Haldean Brown, 2017 Mar 1)
+
 Use ADDR_OTHER instead of ADDR_LINES for many more commands.
 Add tests for using number larger than number of lines in buffer.
 
+Might be useful to have isreadonly(), like we have islocked().
+Avoids exceptions, e.g. when using the b: namespace as a dict.
+
 Patch to make v:shell_error writable. (Christian Brabandt, 2016 Sep 27)
 Useful to restore it.  Is there another solution?
 
 "ci[" does not look for next [ like ci" does look for next ".
 (J.F. 2017 Jan 7)
 
-On MS-Windows with 'clipboard' set to "unnamed" this doesn't work to double
-lines: :g/^/normal yyp   On Unix it works OK.  (Bryce Orgill, 2016 Nov 5)
-
 Patch for wrong cursor position on wrapped line, involving breakindent.
 (Ozaki Kiichi, 2016 Nov 25)
+Does this also fix #1408 ?
 
 Patch for 'cursorlinenr' option. (Ozaki Kiichi, 2016 Nov 30)
 
+Window resizing with 'winfixheight': With a vertical split the height changes
+anyway. (Tommy allen, 2017 Feb 21, #1502)
+
 When adding an item to a new quickfix list make ":cnext" jump to that item.
 Make a difference being at the first item and not having used :cnext at all.
 (Afanasiy Fet, 2017 Jan 3)
@@ -235,13 +273,12 @@ Patch to make it possible to extend a list with itself.
 
 Patch to add Zstandard compressed file support. (Nick Terrell, 2016 Oct 24)
 
-Patch to add new regexp classes :ident:, :keyword:, :fname:.
-(ichizok, 2016 Jan 12, #1373)
-
 Patch to add trim() function. (Bukn, 2016 Nov 25, #1280)
 
 Patch to add MODIFIED_BY to MSVC build file. (Chen Lei, 2016 Nov 24, #1275)
 
+Patch to change argument of :marks. (LemonBoy, 2017 Jan 29, #1426)
+
 On Windows buffer completion sees backslash as escape char instead of path
 separator. (Toffanim, 2016 Nov 24, #1274)
 
@@ -279,7 +316,7 @@ change as a word boundary. (btucker-MPCData, 2016 Nov 6, #1235)
 Idea from Sven: record sequence of keys.  Useful to show others what they are
 doing (look over the shoulder), and also to see what happened.
 Probably list of keystrokes, with some annotations for mode changes.
-Could store in logfile to be able to analyise it with an external command.
+Could store in logfile to be able to analyse it with an external command.
 E.g. to see when's the last time a plugin command was used.
 
 execute() cannot be used with command completeion. (Daniel Hahler, 2016 Oct 1,
@@ -307,7 +344,7 @@ Also with latest version.
 Cannot delete a file with square brackets with delete(). (#696)
 
 Patch to add ":syn foldlevel" to use fold level further down the line.
-(Brad King, 2016 Oct 19)
+(Brad King, 2016 Oct 19, update 2017 Jan 30)
 
 Completion for input() does not expand environment variables. (chdiza, 2016
 Jul 25, #948)
@@ -409,6 +446,9 @@ Add stronger encryption.  Could use libsodium (NaCl).
 https://github.com/jedisct1/libsodium/
 Possibly include the needed code so that it can be build everywhere.
 
+Add a way to restart a timer.  It's similar to timer_stop() and timer_start(),
+but the reference remains valid.
+
 Patch to add setbufline(). (email from Yasuhiro Matsumoto, patch by Ozaki
 Kiichi, 2016 Feb 28)
 Update Mar 8: https://gist.github.com/mattn/23c1f50999084992ca98
@@ -569,6 +609,9 @@ Patch to add :mapgroup, put mappings in a group like augroup.
 Value returned by virtcol() changes depending on how lines wrap.  This is
 inconsistent with the documentation.
 
+Value of virtcol() for '[ and '] depend on multi-byte character.
+(Luchr, #277)
+
 Can we cache the syntax attributes, so that updates for 'relativenumber' and
 'cursorline'/'cursorcolumn' are a lot faster?
 
@@ -1027,6 +1070,9 @@ Patch for :tabcloseleft, after closing a tab go to left tab. (William Bowers,
 Patch to improve equivalence classes in regexp patterns.
 (Christian Brabandt, 2013 Jan 16, update Jan 17)
 
+Patch to add new regexp classes :ident:, :keyword:, :fname:.
+(ichizok, 2016 Jan 12, #1373)
+
 Patch with suggestions for starting.txt. (Tony Mechelynck, 2012 Oct 24)
 But use Gnome instead of GTK?
 
@@ -1061,9 +1107,6 @@ Aug 16)
 When there are no command line arguments ":next" and ":argu" give E163, which
 is confusing.  Should say "the argument list is empty".
 
-xterm supports escape sequences to mark a paste operation.  Need to be
-enabled. (Bruno Sutic, 2014 Jul 11)  How to know the terminal supports this?
-
 URXVT:
 - will get stuck if byte sequence does not contain the expected semicolon.
 - Use urxvt mouse support also in xterm.  Explanations:

runtime/doc/usr_02.txt

@@ -1,4 +1,4 @@
-*usr_02.txt*	For Vim version 8.0.  Last change: 2016 Jan 16
+*usr_02.txt*	For Vim version 8.0.  Last change: 2017 Mar 14
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -554,7 +554,7 @@ Summary: 					*help-summary*  >
 8) Ex-commands always start with ":", so to go to the :s command help: >
 	:help :s
 
-9) Commands specifically for debugging start with ">".  To go to to the help
+9) Commands specifically for debugging start with ">".  To go to the help
    for the "cont" debug command: >
 	:help >cont
 
@@ -589,7 +589,7 @@ Summary: 					*help-summary*  >
     register: >
    	:help quote:
 
-13) Vim Script (VimL) is available at >
+13) Vim script is available at >
 	:help eval.txt
 <   Certain aspects of the language are available at :h expr-X where "X" is a
    single letter. E.g.  >
@@ -599,10 +599,10 @@ Summary: 					*help-summary*  >
    Also important is >
    	:help function-list
 <   to find a short description of all functions available.  Help topics for
-   VimL functions always include the "()", so: >
+   Vim script functions always include the "()", so: >
    	:help append()
-<   talks about the append VimL function rather than how to append text in the
-   current buffer.
+<   talks about the append Vim script function rather than how to append text
+   in the current buffer.
 
 14) Mappings are talked about in the help page :h |map.txt|. Use >
     	:help mapmode-i
@@ -663,7 +663,7 @@ Summary: 					*help-summary*  >
 22) Autocommand events can be found by their name: >
      	:help BufWinLeave
 <    To see all possible events: >
-	:help autocommands-events
+	:help autocommand-events
 
 23) Command-line switches always start with "-".  So for the help of the -f
     command switch of Vim use: >

runtime/doc/usr_03.txt

@@ -182,7 +182,7 @@ the following:
 
 This tells you that you might want to fix something on line 33.  So how do you
 find line 33?  One way is to do "9999k" to go to the top of the file and "32j"
-to go down thirty two lines.  It is not a good way, but it works.  A much
+to go down thirty-two lines.  It is not a good way, but it works.  A much
 better way of doing things is to use the "G" command.  With a count, this
 command positions you at the given line number.  For example, "33G" puts you
 on line 33.  (For a better way of going through a compiler's error list, see

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 8.0.  Last change: 2016 Nov 29
+*usr_41.txt*	For Vim version 8.0.  Last change: 2017 Mar 09
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -95,7 +95,7 @@ Then there is the ":let i += 1" command.  This does the same thing as
 to the same variable.
 
 The example was given to explain the commands, but would you really want to
-make such a loop it can be written much more compact: >
+make such a loop, it can be written much more compact: >
 
 	:for i in range(1, 4)
 	:  echo "count is" i
@@ -693,6 +693,7 @@ Other computation:					*bitwise-function*
 Variables:						*var-functions*
 	type()			type of a variable
 	islocked()		check if a variable is locked
+	funcref()		get a Funcref for a function reference
 	function()		get a Funcref for a function name
 	getbufvar()		get a variable value from a specific buffer
 	setbufvar()		set a variable in a specific buffer
@@ -884,6 +885,7 @@ GUI:						*gui-functions*
 	getfontname()		get name of current font being used
 	getwinposx()		X position of the GUI Vim window
 	getwinposy()		Y position of the GUI Vim window
+	balloon_show()		set the balloon content
 
 Vim server:					*server-functions*
 	serverlist()		return the list of server names
@@ -920,14 +922,16 @@ Testing:				    *test-functions*
 	assert_fails()		assert that a function call fails
 	test_alloc_fail()	make memory allocation fail
 	test_autochdir()	enable 'autochdir' during startup
-	test_disable_char_avail()	test without typeahead
-	test_garbagecollect_now()	free memory right now
+	test_override()		test with Vim internal overrides
+	test_garbagecollect_now()   free memory right now
+	test_ignore_error()	ignore a specific error message
 	test_null_channel()	return a null Channel
 	test_null_dict()	return a null Dict
 	test_null_job()		return a null Job
 	test_null_list()	return a null List
 	test_null_partial()	return a null Partial function
 	test_null_string()	return a null String
+	test_settime()		set the time Vim uses internally
 
 Inter-process communication:		    *channel-functions*
 	ch_canread()		check if there is something to read
@@ -1000,6 +1004,7 @@ Various:					*various-functions*
 	perleval()		evaluate Perl expression (|+perl|)
 	py3eval()		evaluate Python expression (|+python3|)
 	pyeval()		evaluate Python expression (|+python|)
+	pyxeval()		evaluate |python_x| expression
 
 ==============================================================================
 *41.7*	Defining a function
@@ -1587,7 +1592,7 @@ WHITE SPACE
 Blank lines are allowed and ignored.
 
 Leading whitespace characters (blanks and TABs) are always ignored.  The
-whitespaces between parameters (e.g. between the 'set' and the 'cpoptions' in
+whitespaces between parameters (e.g. between the "set" and the "cpoptions" in
 the example below) are reduced to one blank character and plays the role of a
 separator, the whitespaces after the last (visible) character may or may not
 be ignored depending on the situation, see below.

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 8.0.  Last change: 2016 Sep 06
+*various.txt*   For Vim version 8.0.  Last change: 2017 Feb 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -527,12 +527,14 @@ N  *+X11*		Unix only: can restore window title |X11|
 :redi[r] END		End redirecting messages.  {not in Vi}
 
 							*:filt* *:filter*
-:filt[er] {pat} {command}
-:filt[er] /{pat}/ {command}
-			Restrict the output of {command} to matches with {pat}.
-			For example, to list only xml files: >
+:filt[er][!] {pat} {command}
+:filt[er][!] /{pat}/ {command}
+			Restrict the output of {command} to lines matching
+			with {pat}.  For example, to list only xml files: >
 				:filter /\.xml$/ oldfiles
-<
+<			If the [!] is given, restrict the output of {command}
+			to lines that do NOT match {pat}.
+
 			{pat} is a Vim search pattern.  Instead of enclosing
 			it in / any non-ID character (see |'isident'|) can be
 			used, so long as it does not appear in {pat}.  Without
@@ -634,7 +636,7 @@ K			Run a program to lookup the keyword under the
 			with the command >
 				:!{program} {keyword}
 <			There is an example of a program to use in the tools
-			directory of Vim.  It is called 'ref' and does a
+			directory of Vim.  It is called "ref" and does a
 			simple spelling check.
 			Special cases:
 			- If 'keywordprg' begins with ":" it is invoked as

runtime/doc/version6.txt

@@ -886,7 +886,7 @@ Adjusted test2 for this.
 Allow using a URL in 'path'.  Makes ":find index.html" work.
 
 GTK: Allow dropping a http:// and ftp:// URL on Vim.  The netrw plugin takes
-care of downloading the file. (MiKael Berthe)
+care of downloading the file. (Mikael Berthe)
 
 
 Window for command-line editing				*new-cmdwin*
@@ -5388,7 +5388,7 @@ Files:	    src/os_win32.c
 
 Patch 6.0.256 (extra)
 Problem:    Win32: ":highlight Comment guifg=asdf" does not give an error
-	    message. (Randall W.  Morris)  Also for other systems.
+	    message. (Randall W. Morris)  Also for other systems.
 Solution:   Add gui_get_color() to give one error message for all systems.
 Files:	    src/gui.c, src/gui_amiga.c, src/gui_athena.c, src/gui_motif.c,
 	    src/gui_riscos.c, src/gui_x11.c, src/gui_gtk_x11.c,
@@ -9955,7 +9955,7 @@ Use "copy /y" in Make_bc5.mak to avoid a prompt for overwriting.
 
 Patch 6.2.001
 Problem:    The ":stopinsert" command doesn't have a help tag.
-Solution:   Add the tag. (Antoine J.  Mechelynck)
+Solution:   Add the tag. (Antoine J. Mechelynck)
 Files:	    runtime/doc/insert.txt, runtime/doc/tags
 
 Patch 6.2.002

runtime/doc/version7.txt

@@ -1445,7 +1445,7 @@ g CTRL-G also shows the number of characters if it differs from the number of
 bytes.
 
 Completion for ":debug" and entering an expression for the '=' register.  Skip
-":" between range and command name. (Peter winters)
+":" between range and command name. (Peter Winters)
 
 CTRL-Q in Insert mode now works like CTRL-V by default.  Previously it was
 ignored.
@@ -3371,7 +3371,7 @@ Files:	    runtime/scripts.vim
 Patch 7.0.050
 Problem:    After using the netbeans interface close command a stale pointer
 	    may be used.
-Solution:   Clear the pointer to the closed buffer. (Xaview de Gaye)
+Solution:   Clear the pointer to the closed buffer. (Xavier de Gaye)
 Files:	    src/netbeans.c
 
 Patch 7.0.051 (after 7.0.44)
@@ -10202,7 +10202,7 @@ objects in place of `str()` ones avoiding possibility of UnicodeDecodeError.
 interfaces to some extent. Extent will be improved in the future.
 
 Added special |python-vars| objects also available for |python-buffer| and 
-|python-window|. They ease access to VimL variables from Python.
+|python-window|. They ease access to Vim script variables from Python.
 
 Now you no longer need to alter `sys.path` to import your module: special 
 hooks are responsible for importing from {rtp}/python2, {rtp}/python3 and 
@@ -16272,7 +16272,7 @@ Files:	    src/regexp_nfa.c, src/testdir/test64.in, src/testdir/test64.ok
 
 Patch 7.3.1026
 Problem:    New regexp: pattern that includes a new-line matches too early.
-	    (john McGowan)
+	    (John McGowan)
 Solution:   Do not start searching in the second line.
 Files:	    src/regexp_nfa.c, src/testdir/test64.in, src/testdir/test64.ok
 

runtime/doc/version8.txt

@@ -1,4 +1,4 @@
-*version8.txt*  For Vim version 8.0.  Last change: 2017 Jan 15
+*version8.txt*  For Vim version 8.0.  Last change: 2017 Mar 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -200,9 +200,9 @@ Options: ~
 'perldll'		name of the Perl dynamic library
 'pythondll'		name of the Python 2 dynamic library
 'pythonthreedll'	name of the Python 3 dynamic library
-'signcolumn'		when to display the sign column
 'renderoptions'		options for text rendering on Windows
 'rubydll'		name of the Ruby dynamic library
+'signcolumn'		when to display the sign column
 'tagcase'		how to handle case when searching in tags files
 'tcldll'		name of the Tcl dynamic library
 'termguicolors'		use GUI colors for the terminal
@@ -296,7 +296,7 @@ New and extended functions: ~
 |systemlist()|		get the result of a shell command as a list
 |test_alloc_fail()|	make memory allocation fail
 |test_autochdir()|	test 'autochdir' functionality
-|test_disable_char_avail()| test without typeahead
+test_disable_char_avail() test without typeahead (removed later)
 |test_garbagecollect_now()| free memory right now
 |test_null_channel()|	return a null Channel
 |test_null_dict()|	return a null Dict
@@ -426,7 +426,7 @@ When no vimrc file is found, the |defaults.vim| script is loaded to set more
 useful default values for new users.  That includes setting 'nocompatible'.
 Thus Vim no longer starts up in Vi compatible mode.  If you do want that,
 either create a .vimrc file that does "set compatible" or start Vim with
-"Vim -C".
+"vim -C".
 
 
 Support removed ~
@@ -1866,7 +1866,7 @@ Files:	    runtime/doc/eval.txt, src/eval.c, src/testdir/test60.in,
 	    src/testdir/test60.ok
 
 Patch 7.4.237 (after 7.4.236)
-Problem:    When some patches was not included has("patch-7.4.123") may return
+Problem:    When some patches were not included has("patch-7.4.123") may return
 	    true falsely.
 Solution:   Check for the specific patch number.
 Files:	    runtime/doc/eval.txt, src/eval.c
@@ -3436,7 +3436,7 @@ Files:	    runtime/doc/options.txt, src/Makefile, src/regexp.c, src/regexp.h,
 Patch 7.4.498 (after 7.4.497)
 Problem:    Typo in DOS makefile.
 Solution:   Change exists to exist. (Ken Takata)
-Files:	    src/testdirMake_dos.mak
+Files:	    src/testdir/Make_dos.mak
 
 Patch 7.4.499
 Problem:    substitute() can be slow with long strings.

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Jan 06
+" Last Change:	2017 Mar 13
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -1366,6 +1366,9 @@ endfunc
 " Not Quite C
 au BufNewFile,BufRead *.nqc			setf nqc
 
+" NSE - Nmap Script Engine - uses Lua syntax
+au BufNewFile,BufRead *.nse			setf lua
+
 " NSIS
 au BufNewFile,BufRead *.nsi,*.nsh		setf nsis
 
@@ -2280,6 +2283,9 @@ au BufNewFile,BufRead .tidyrc,tidyrc		setf tidy
 " TF mud client
 au BufNewFile,BufRead *.tf,.tfrc,tfrc		setf tf
 
+" tmux configuration
+au BufNewFile,BufRead {.,}tmux*.conf		setf tmux
+
 " TPP - Text Presentation Program
 au BufNewFile,BufReadPost *.tpp			setf tpp
 

runtime/ftplugin/a2ps.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         a2ps(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             a2ps(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/alsaconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         alsaconf(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             alsaconf(8) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/arch.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         GNU Arch inventory file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             GNU Arch inventory file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/automake.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Automake
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Automake
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/awk.vim

@@ -0,0 +1,18 @@
+" Vim filetype plugin
+" Language:	awk, nawk, gawk, mawk
+" Maintainer:	Antonio Colombo <azc100@gmail.com>
+" Last Change:	2017 Feb 17
+
+" This plugin was prepared by Mark Sikora
+
+" Only do this when not done yet for this buffer
+if exists("b:did_ftplugin")
+  finish
+endif
+
+" Don't load another plugin for this buffer
+let b:did_ftplugin = 1
+
+let b:undo_ftplugin = "setl commentstring<"
+
+setlocal commentstring=#\ %s

runtime/ftplugin/bdf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         BDF font definition
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             BDF font definition
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/calendar.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         calendar(1) input file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             calendar(1) input file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/cdrdaoconf.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2007-12-04
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2007-12-04
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/conf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         generic configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             generic configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/crm.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         CRM114
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             CRM114
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/css.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         CSS
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             CSS
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/cvsrc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         cvs(1) RC file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             cvs(1) RC file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/denyhosts.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2007-12-04
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2007-12-04
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dictconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         dict(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             dict(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dictdconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         dictd(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             dictd(8) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dircolors.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         dircolors(1) input file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             dircolors(1) input file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dosini.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Configuration File (ini file) for MSDOS/MS Windows
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Configuration File (ini file) for MSDOS/MS Windows
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/elinks.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         elinks(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             elinks(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/eterm.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         eterm(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             eterm(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/fetchmail.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         fetchmail(1) RC File
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             fetchmail(1) RC File
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/framescript.vim

@@ -1,7 +1,7 @@
 " Vim ftplugin file
-" Language:         FrameScript
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-19
+" Language:             FrameScript
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-19
 
 let s:cpo_save = &cpo
 set cpo&vim

runtime/ftplugin/gpg.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         gpg(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             gpg(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/group.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         group(5) user group file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             group(5) user group file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/grub.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         grub(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             grub(8) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/hamster.vim

@@ -1,8 +1,8 @@
 " Vim filetype plugin
 " Language:    Hamster Script
 " Version:     2.0.6.0
-" Maintainer:  David Fishburn <fishburn@ianywhere.com>
-" Last Change: Wed Nov 08 2006 12:03:09 PM
+" Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
+" Last Change: 2017 Mar 07
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -13,6 +13,7 @@ endif
 let b:did_ftplugin = 1
 
 let s:cpo_save = &cpo
+set cpo&vim
 set cpo-=C
 
 let b:undo_ftplugin = "setl fo< com< tw< commentstring<"

runtime/ftplugin/haskell.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Haskell
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Haskell
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/help.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Vim help file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Vim help file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/hostconf.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2007-12-04
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2007-12-04
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/hostsaccess.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         hosts_access(5) control file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             hosts_access(5) control file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/indent.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         indent(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             indent(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/ld.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         ld(1) script
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             ld(1) script
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/lftp.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         lftp(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             lftp(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/libao.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         libao.conf(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             libao.conf(5) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/limits.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         limits(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             limits(5) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/loginaccess.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         login.access(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             login.access(5) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/logindefs.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         login.defs(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             login.defs(5) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/m4.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         m4
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             m4
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/mailaliases.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/mailcap.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Mailcap configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Mailcap configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/man.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	man
 " Maintainer:	SungHyun Nam <goweol@gmail.com>
-" Last Change: 	2017 Jan 04
+" Last Change: 	2017 Jan 18
 
 " To make the ":Man" command available before editing a manual page, source
 " this script from your startup vimrc file.
@@ -97,7 +97,7 @@ func <SID>GetCmdArg(sect, page)
 endfunc
 
 func <SID>FindPage(sect, page)
-  let where = system("/usr/bin/man ".s:man_find_arg.' '.s:GetCmdArg(a:sect, a:page))
+  let where = system("man ".s:man_find_arg.' '.s:GetCmdArg(a:sect, a:page))
   if where !~ "^/"
     if matchstr(where, " [^ ]*$") !~ "^ /"
       return 0
@@ -176,7 +176,7 @@ func <SID>GetPage(...)
     let $MANWIDTH = winwidth(0)
     let unsetwidth = 1
   endif
-  silent exec "r!/usr/bin/man ".s:GetCmdArg(sect, page)." | col -b"
+  silent exec "r !man ".s:GetCmdArg(sect, page)." | col -b"
   if unsetwidth
     let $MANWIDTH = ''
   endif

runtime/ftplugin/manconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         man.conf(5) - man configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             man.conf(5) - man configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/modconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         modules.conf(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             modules.conf(5) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/mplayerconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         mplayer(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             mplayer(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/muttrc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         mutt RC File
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2006-04-19
+" Language:             mutt RC File
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2006-04-19
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/nanorc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         nanorc(5) - GNU nano configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             nanorc(5) - GNU nano configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/netrc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         netrc(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             netrc(5) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/nsis.vim

@@ -1,7 +1,7 @@
 " Vim ftplugin file
-" Language:         NSIS script
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             NSIS script
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 let s:cpo_save = &cpo
 set cpo&vim

runtime/ftplugin/pamconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         pam(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             pam(8) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/passwd.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         passwd(5) password file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             passwd(5) password file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/pinfo.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         pinfo(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             pinfo(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/procmail.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         procmail(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             procmail(1) configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/prolog.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Prolog
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Prolog
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/protocols.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         protocols(5) - Internet protocols definition file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             protocols(5) - Internet protocols definition file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/quake.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Quake[1-3] configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Language:             Quake[1-3] configuration file
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish