* Dedicate upcoming Vim 9.1 to Bram
Also replace in a few more places Brams email address and mention new
maintainers.
* Remove Bram from any Maintainer role
* runtime: Align Header
* it's mailing list not mailinglist
Problem: Undo test is flaky.
Solution: Apply filter and change time to "1 second ago" in both dumps.
closes: #12771
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: vim9 crash when class member overridden
Solution: Use method_count field instead
closes: #12676closes: #12677
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: compile warning for xdiff/xutils on MS-Windows
Solution: add explicit type cast from size_t to long
closes: #12531
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Mike Williams <mikew@globalgraphics.com>
Problem: incsearch test not sufficient (after 9.0.1691)
Solution: add an additional test
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: wrong mapping applied when replaying a char search
Solution: Store a NOP after the ESC
closes: #12708closes: #6350
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Ctrl-Q not handled like Ctrl-V in replace mode
Solution: Handle Ctrl-Q like Ctrl-V
closes: #12686closes: #12684
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Android not handling AI_V4MAPPED ai_flag
Solution: don't set AI_V4MAPPED flag when on Android, since
Android's getaddrinfo returns EAI_BADFLAGS if ai_flags
contains it
closes: #12613
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: cions <gh.cions@gmail.com>
Problem: wrong viewport restored for incsearch and smoothscroll
Solution: Save and restore skipcol as well
closes: #12713
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: popup_create() not aborting on errors
Solution: check for errors in arguments given and abort if an error
occurred
closes: #12711
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: python 3.12 produces warnings and fails test
Solution: Make use of raw strings in python3 tests
closes: #12765
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Zdenek Dohnal <zdohnal@redhat.com>
Problem: mapset() not properly handling script ID
Solution: replace_termcodes() may accept a script ID
closes: #12699closes: #12697
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: undotree() only works for the current buffer
Solution: Add an optional "buffer number" parameter to undotree(). If
omitted, use the current buffer for backwards compatibility.
closes: #4001closes: #12292
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Co-authored-by: Devin J. Pohly <djpohly@gmail.com>
Problem: Python 3.11 interface throws deprecation warnings
Solution: ignore those warnings for gcc and clang
Python 3.11 deprecation warnings are already silenced for clang using
the pragma
```
# pragma clang diagnostic ignored "-Wdeprecated-declarations"
```
However those warnings are also emitted when using gcc. To avoid them
for both compilers, change use the __GNUC__ ifdef, which is defined for
gcc as well as clang.
Additionally, instead of using the "clang diagnostic ignored" pragma,
let's make use of 'GCC diagnostic ignored' which is again supported by
clang and GCC
closes: #12610
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Philip H <47042125+pheiduck@users.noreply.github.com>
Problem: libvterm slightly outdated
Solution: Update libvterm from rev 818 to rev 839
Notable fix: libvterm now handles DECSM/DECRM with multiple arguents,
so several ncurses programs (e.g. nnn) can enable mouse properly when
run in Vim's terminal in XTerm.
closes: #12746
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Using xxd(1) to filter and edit binary files causes the input files
to have dual nature, so to speak, which effectively makes restoring
the cursor position broken. Fix that by ignoring the "xxd" file type
in the code that restores the cursor position.
Interactive rebasing in git causes files to be edited in vim, which,
similarly to commit messages, are rarely the same as the last one
edited. Thus, also add "gitrebase" to the list of file types for
which the cursor position isn't restored.
While there, refactor the code a bit to possibly save a few CPU cycles
and to keep the line lengths in check, and use the long form of the
commands and variables, to make the code slightly more consistent and
more understandable to newcomers.
Update the relevant comments in the code and the associated parts of
the documentation, to keep them in sync with the updated code.
Remove some redundant trailing whitespace as well, as spotted.
Save and restore the view position before and after saving the buffer,
respectively, to keep the current view of the xxd(1)'s hex dump
unchanged after doing ":w", which previously caused the window to
scroll back to the very beginning of the buffer. I believe it's
needless to say how annoying and counterproductive that was.
Get rid of the "Press ENTER or type command to continue" message, which
was previously displayed after opening larger binary files. The use
of "silent" and "redraw" commands is tailored specifically to avoid
screen flickering, e.g. when doing ":w", which is caused by the buffer
being filtered by an external command.
Increase the number of octets per line, produced by xxd(1), from the
default value of 16 to 32. This puts bigger chunks of the hex dump
on the screen and makes the whole thing much more usable.
While there, reformat the code to make it more readable, and use the
long form of the commands and variables to make the code slightly more
consistent and more understandable to newcomers.
This is a collection of various PRs from github that all require a minor
patch number:
1) https://github.com/vim/vim/pull/12612
Do not conflate dictionary key with end of block
2) https://github.com/vim/vim/pull/12729:
When saving and restoring 'undolevels', the constructs `&undolevels` and
`:set undolevels` are problematic.
The construct `&undolevels` reads an unpredictable value; it will be the
local option value (if one has been set), or the global option value
(otherwise), making it unsuitable for saving a value for later
restoration.
Similarly, if a local option value has been set for 'undolevels',
temporarily modifying the option via `:set undolevels` changes the local
value as well as the global value, requiring extra work to restore both
values.
Saving and restoring the option value in one step via the construct
`:let &undolevels = &undolevels` appears to make no changes to the
'undolevels' option, but if a local option has been set to a different
value than the global option, it has the unintended effect of changing
the global 'undolevels' value to the local value.
Update the documentation to explain these issues and recommend explicit
use of global and local option values when saving and restoring. Update
some unit tests to use `g:undolevels`.
3) https://github.com/vim/vim/pull/12702:
Problem: Pip requirements files are not recognized.
Solution: Add a pattern to match pip requirements files.
4) https://github.com/vim/vim/pull/12688:
Add indent file and tests for ABB Rapid
5) https://github.com/vim/vim/pull/12668:
Use Lua 5.1 numeric escapes in tests and add to CI
Only Lua 5.2+ and LuaJIT understand hexadecimal escapes in strings. Lua
5.1 only supports decimal escapes:
> A character in a string can also be specified by its numerical value
> using the escape sequence \ddd, where ddd is a sequence of up to three
> decimal digits. (Note that if a numerical escape is to be followed by a
> digit, it must be expressed using exactly three digits.) Strings in Lua
> can contain any 8-bit value, including embedded zeros, which can be
> specified as '\0'.
To make sure this works with Lua 5.4 and Lua 5.1 change the Vim CI to
run with Lua 5.1 as well as Lua 5.4
6) https://github.com/vim/vim/pull/12631:
Add hurl filetype detection
7) https://github.com/vim/vim/pull/12573:
Problem: Files for haskell persistent library are not recognized
Solution: Add pattern persistentmodels for haskell persistent library
closes: #12612closes: #12729closes: #12702closes: #12688closes: #12668closes: #12631closes: #12573
Co-authored-by: lacygoill <lacygoill@lacygoill.me>
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Jacob Pfeifer <jacob@pfeifer.dev>
Co-authored-by: Borys Lykah <lykahb@fastmail.com>
Problem: crypt: sodium encryption is not portable
Solution: use little-endian byte order for sodium encrypted files
As mentioned in #12586, sodium encryption only works on little ending
architectures, because reading and writing the sodium encryption
parameters are stored in the encrypted files in an arch-dependent way.
This of course fails for big-endian architectures like s390.
So make sure to use little-endian byte order when reading and writing
sodium encrypted files.
fixes: #12586
closes: 12655
Problem: sodium test fails in Github CI
Solution: Catch sodium_mlock() errors and do not error out
sodium_mlock() seems to fail consistently on the Github CI. Perhaps
[sodium_mlock()](https://libsodium.gitbook.io/doc/memory_management#text-locking-memory)
is called too often or with too much memory by the runners so
that this starts failing.
Let's just try to catch this and skip the test, when this starts
happening.
closes: #12751
https://github.com/voxpupuli/hiera-eyaml/ uses and produces the eyaml
format, which is simply yaml with some encrypted values.
It's convenient to edit the file without decrypting when not touching
encrypted values (or when you don't have access to the decryption key),
which is why vim should treat those files as yaml files.
* feat(heex): borrow matchit support from html
Makes % support behave the same in heex as in html. For example, quickly moving the cursor between opening and closing tags.
* Remove unnecessary line; define b:undo_ftplugin first
* Remove b:html_set_match_words
Problem: Tests may leave leftover files around
Solution: Clean up tests and remove files
There were a few failures in 'linux (huge, gcc, testgui, true, true)'
e.g. here: https://github.com/vim/vim/actions/runs/5497376153/jobs/10018060156
,----
| Error detected while processing command line..script /home/runner/work/vim/vim/src/testdir/runtest.vim[585]..function RunTheTest[54]..Test_lvimgrep_crash[16]..TestTimeout[12]..VimLeavePre Autocommands for "*"..function EarlyExit[7]..FinishTesting:
| line 70:
| E445: Other window contains changes
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txt
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txt
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txtmalloc(): unsorted double linked list corrupted
`----
Which is puzzling, because the Xtest_stable_xxd file should have been
long gone after test_crypt.vim is run (and definitely no longer be
staying around in test_quickfix.vim).
So try to clean up properly after a test script is run, just in case any
X<file> is still around. During testing, a found a few leftover files,
which I also fixed in the relevant test-file.
Unfortunately, the test workflow 'linux (huge, gcc, testgui, true,
true)' now seems to fail with 'E1230: Encryption: sodium_mlock()' in
test_crypt.vim. Hopefully this is only temporary.
