patch 8.1.1036: quickfix function arguments are inconsistent

Problem:    Quickfix function arguments are inconsistent.
Solution:   Pass a list pointer to more functions. (Yegappan Lakshmanan,
            closes #4149)

.gitignore

@@ -80,6 +80,7 @@ src/testdir/dostmp/*
 src/testdir/messages
 src/testdir/viminfo
 src/testdir/opt_test.vim
+runtime/indent/testdir/*.out
 src/memfile_test
 src/json_test
 src/message_test

.travis.yml

@@ -10,54 +10,58 @@ compiler:
   - gcc
 
 env:
-  - BUILD=yes TEST=scripttests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
-  - BUILD=no TEST=unittests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=yes
-  - BUILD=yes TEST=test COVERAGE=no FEATURES=normal CONFOPT= SHADOWOPT="-C src/shadow" SRCDIR=./src/shadow CHECK_AUTOCONF=no
-  - BUILD=yes TEST=test COVERAGE=no FEATURES=small CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-  - BUILD=yes TEST=test COVERAGE=no FEATURES=tiny  CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-    # Mac OSX build
-  - BUILD=yes TEST=test COVERAGE=no FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
-    # ASAN build
-  - BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+  - &tiny-nogui
+    BUILD=yes TEST=test COVERAGE=no FEATURES=tiny "CONFOPT='--disable-gui'" SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+  - &tiny
+    BUILD=yes TEST=test COVERAGE=no FEATURES=tiny CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+  - &asan # ASAN build
+    BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
     FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan" LSAN_OPTIONS="suppressions=$TRAVIS_BUILD_DIR/src/testdir/lsan-suppress.txt"
     "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
+  - &linux-huge
+    BUILD=yes TEST="scripttests test_libvterm" COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
+  - &unittests
+    BUILD=no TEST=unittests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=yes
+  - &normal
+    BUILD=yes TEST=test COVERAGE=no FEATURES=normal CONFOPT= SHADOWOPT="-C src/shadow" SRCDIR=./src/shadow CHECK_AUTOCONF=no
+  - &small
+    BUILD=yes TEST=test COVERAGE=no FEATURES=small CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+  - &osx-huge # Mac OSX build
+    BUILD=yes TEST=test COVERAGE=no FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
 
 sudo: false
 
 # instead of a 2*2*8 matrix (2*os + 2*compiler + 8*env),
 # exclude some builds on mac os x and linux
+# on mac os x "tiny" is always without GUI
 # linux: 2*compiler + 5*env + mac: 2*compiler + 2*env
 matrix:
   exclude:
     - os: osx
-      env: BUILD=yes TEST=test COVERAGE=no FEATURES=normal CONFOPT= SHADOWOPT="-C src/shadow" SRCDIR=./src/shadow CHECK_AUTOCONF=no
+      env: *tiny
     - os: osx
-      env: BUILD=no TEST=unittests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=yes
+      env: *normal
     - os: osx
-      env: BUILD=yes TEST=test COVERAGE=no FEATURES=small CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+      env: *unittests
     - os: osx
-      env: BUILD=yes TEST=scripttests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-            "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
+      env: *small
     - os: osx
-      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
-            FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan" LSAN_OPTIONS="suppressions=$TRAVIS_BUILD_DIR/src/testdir/lsan-suppress.txt"
-            "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
+      env: *linux-huge
+    - os: osx
+      env: *asan
     - os: linux
       compiler: clang
-      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
-            FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan" LSAN_OPTIONS="suppressions=$TRAVIS_BUILD_DIR/src/testdir/lsan-suppress.txt"
-            "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
+      env: *asan
     - os: linux
       compiler: clang
-      env: BUILD=no TEST=unittests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=yes
+      env: *unittests
     - os: linux
       compiler: clang
-      env: BUILD=yes TEST=test COVERAGE=no FEATURES=small CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+      env: *small
     - os: linux
-      env: BUILD=yes TEST=test COVERAGE=no FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-            "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
+      env: *osx-huge
 
 branches:
   except:
@@ -78,38 +82,90 @@ addons:
       - tcl-dev
       - cscope
       - libgtk2.0-dev
+  homebrew:
+    packages:
+      - lua
+    update: true
 
 before_install:
   - rvm reset
   # Remove /opt/python/3.x.x/bin from $PATH for using system python3.
   # ("pyenv global system" doesn't seem to work.)
-  - if [ "$TRAVIS_OS_NAME" = "linux" ] && which python3 | grep '/opt/python/' > /dev/null; then export PATH=$(echo $PATH | sed -e "s#$(echo $(which python3) | sed -e 's#/python3$##'):##"); fi
-  - if [ "$COVERAGE" = "yes" ]; then pip install --user cpp-coveralls; fi
+  - |
+    if [[ "${TRAVIS_OS_NAME}" = "linux" ]] && [[ "$(which python3)" =~ ^/opt/python/ ]]; then
+      export PATH=$(py3=$(which python3); echo ${PATH//${py3%/python3}:/})
+    fi
+  - |
+    if [[ "${COVERAGE}" = "yes" ]]; then
+      pip install --user cpp-coveralls
+    fi
   # needed for https support for coveralls
   # building cffi only works with gcc, not with clang
-  - if [ "$COVERAGE" = "yes" ]; then CC=gcc pip install --user pyopenssl ndg-httpsclient pyasn1; fi
+  - |
+    if [[ "${COVERAGE}" = "yes" ]]; then
+      CC=gcc pip install --user pyopenssl ndg-httpsclient pyasn1
+    fi
   # Lua is not installed on Travis OSX
-  - if [ "$TRAVIS_OS_NAME" = "osx" ]; then export HOMEBREW_NO_AUTO_UPDATE=1; brew update; brew install lua; export LUA_PREFIX=/usr/local; fi
+  - |
+    if [[ "${TRAVIS_OS_NAME}" = "osx" ]]; then
+      export LUA_PREFIX=/usr/local
+    fi
   # Use llvm-cov instead of gcov when compiler is clang.
-  - if [ "$TRAVIS_OS_NAME" = "linux" ] && [ "$CC" = "clang" ]; then ln -sf $(which llvm-cov) /home/travis/bin/gcov; fi
+  - |
+    if [[ "${TRAVIS_OS_NAME}" = "linux" ]] && [[ "${CC}" = "clang" ]]; then
+      ln -sf "$(which llvm-cov)" /home/travis/bin/gcov
+    fi
 
-# Start virtual framebuffer to be able to test the GUI. Does not work on OS X.
 before_script:
-  - if [ "$TRAVIS_OS_NAME" = "linux" ]; then export DISPLAY=:99.0 && sh -e /etc/init.d/xvfb start && sleep 3; fi
+  # Start virtual framebuffer to be able to test the GUI. Does not work on OS X.
+  - |
+    if [[ "${TRAVIS_OS_NAME}" = "linux" ]]; then
+      export DISPLAY=:99.0
+      sh -e /etc/init.d/xvfb start && sleep 3
+    fi
 
 script:
   - NPROC=$(getconf _NPROCESSORS_ONLN)
-  - if [ "$CHECK_AUTOCONF" = "yes" -a "$CC" = "gcc" ]; then make -C src autoconf; fi
-  - if [ "x$SHADOWOPT" != x ]; then make -C src shadow; fi
-  - (cd ${SRCDIR} && ./configure --with-features=$FEATURES $CONFOPT --enable-fail-if-missing && if [ "$BUILD" = "yes" ]; then make -j$NPROC; fi)
+  - |
+    if [[ "${CHECK_AUTOCONF}" = "yes" ]] && [[ "${CC}" = "gcc" ]]; then
+      make -C src autoconf
+    fi
+  - |
+    if [[ -n "${SHADOWOPT}" ]]; then
+      make -C src shadow
+    fi
+  - |
+    (
+    cd "${SRCDIR}" \
+      && ./configure --with-features=${FEATURES} ${CONFOPT} --enable-fail-if-missing
+    ) && if [[ "${BUILD}" = "yes" ]]; then
+      make ${SHADOWOPT} -j${NPROC}
+    fi
   # Show Vim version and also if_xx versions.
-  - if [ "$BUILD" = "yes" ]; then ${SRCDIR}/vim --version; ${SRCDIR}/vim --not-a-term -u NONE -S ${SRCDIR}/testdir/if_ver-1.vim -c quit > /dev/null; ${SRCDIR}/vim --not-a-term -u NONE -S ${SRCDIR}/testdir/if_ver-2.vim -c quit > /dev/null; cat if_ver.txt; fi
-  - make $SHADOWOPT $TEST
-  - if [ -n "$ASAN_OPTIONS" ]; then for log in $(find -type f -name 'asan.*' -size +0); do asan_symbolize < "$log"; err=1; done; fi
-  - if [ -n "$err" ]; then exit 1; fi
+  - |
+    if [[ "${BUILD}" = "yes" ]]; then
+      "${SRCDIR}"/vim --version
+      "${SRCDIR}"/vim --not-a-term -u NONE -S "${SRCDIR}"/testdir/if_ver-1.vim -c quit > /dev/null
+      "${SRCDIR}"/vim --not-a-term -u NONE -S "${SRCDIR}"/testdir/if_ver-2.vim -c quit > /dev/null
+      cat if_ver.txt
+    fi
+  - make ${SHADOWOPT} ${TEST}
+  - |
+    if [[ -n "${ASAN_OPTIONS}" ]]; then
+      while read log; do
+        asan_symbolize < "${log}"
+      done < <(find . -type f -name 'asan.*' -size +0)
+      [[ -z "${log}" ]] # exit 1 if there are ASAN logs
+    fi
 
 after_success:
-  - if [ "$COVERAGE" = "yes" ]; then ~/.local/bin/coveralls -b ${SRCDIR} -x .xs -e ${SRCDIR}/xxd -e ${SRCDIR}/if_perl.c --encodings utf-8 latin-1 EUC-KR; fi
-  - if [ "$COVERAGE" = "yes" ]; then  cd ${SRCDIR} && bash <(curl -s https://codecov.io/bash) ; fi
+  - |
+    if [[ "${COVERAGE}" = "yes" ]]; then
+      ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8 latin-1 EUC-KR
+    fi
+  - |
+    if [[ "${COVERAGE}" = "yes" ]]; then
+      (cd "${SRCDIR}" && bash <(curl -s https://codecov.io/bash))
+    fi
 
 # vim:set sts=2 sw=2 tw=0 et:

Filelist

@@ -1,5 +1,5 @@
 # List of distributed Vim files.
-# Used by Makefile and upload.aap.
+# Used by Makefile.
 
 # source files for all source archives
 SRC_ALL =	\
@@ -7,15 +7,17 @@ SRC_ALL =	\
 		.lgtm.yml \
 		.travis.yml \
 		appveyor.yml \
+		ci/appveyor.bat \
 		src/Make_all.mak \
-		src/appveyor.bat \
 		src/README.txt \
 		src/alloc.h \
 		src/arabic.c \
 		src/arabic.h \
 		src/ascii.h \
+		src/autocmd.c \
 		src/beval.c \
 		src/beval.h \
+		src/blob.c \
 		src/blowfish.c \
 		src/buffer.c \
 		src/channel.c \
@@ -35,10 +37,9 @@ SRC_ALL =	\
 		src/ex_docmd.c \
 		src/ex_eval.c \
 		src/ex_getln.c \
-		src/farsi.c \
-		src/farsi.h \
 		src/feature.h \
 		src/fileio.c \
+		src/findfile.c \
 		src/fold.c \
 		src/getchar.c \
 		src/globals.h \
@@ -47,6 +48,7 @@ SRC_ALL =	\
 		src/gui_beval.c \
 		src/hardcopy.c \
 		src/hashtab.c \
+		src/indent.c \
 		src/json.c \
 		src/json_test.c \
 		src/kword_test.c \
@@ -81,16 +83,18 @@ SRC_ALL =	\
 		src/screen.c \
 		src/search.c \
 		src/sha256.c \
-		src/structs.h \
+		src/sign.c \
 		src/spell.c \
 		src/spell.h \
 		src/spellfile.c \
+		src/structs.h \
 		src/syntax.c \
 		src/tag.c \
 		src/term.c \
 		src/terminal.c \
 		src/term.h \
 		src/termlib.c \
+		src/textprop.c \
 		src/ui.c \
 		src/undo.c \
 		src/userfunc.c \
@@ -101,9 +105,7 @@ SRC_ALL =	\
 		src/window.c \
 		src/tee/tee.c \
 		src/xxd/xxd.c \
-		src/main.aap \
 		src/testdir/gen_opt_test.vim \
-		src/testdir/main.aap \
 		src/testdir/README.txt \
 		src/testdir/Make_all.mak \
 		src/testdir/*.in \
@@ -143,8 +145,11 @@ SRC_ALL =	\
 		src/testdir/if_ver*.vim \
 		src/testdir/color_ramp.vim \
 		src/proto.h \
+		src/protodef.h \
 		src/proto/arabic.pro \
+		src/proto/autocmd.pro \
 		src/proto/beval.pro \
+		src/proto/blob.pro \
 		src/proto/blowfish.pro \
 		src/proto/buffer.pro \
 		src/proto/channel.pro \
@@ -162,14 +167,15 @@ SRC_ALL =	\
 		src/proto/ex_docmd.pro \
 		src/proto/ex_eval.pro \
 		src/proto/ex_getln.pro \
-		src/proto/farsi.pro \
 		src/proto/fileio.pro \
+		src/proto/findfile.pro \
 		src/proto/fold.pro \
 		src/proto/getchar.pro \
 		src/proto/gui.pro \
 		src/proto/gui_beval.pro \
 		src/proto/hardcopy.pro \
 		src/proto/hashtab.pro \
+		src/proto/indent.pro \
 		src/proto/json.pro \
 		src/proto/list.pro \
 		src/proto/main.pro \
@@ -192,6 +198,7 @@ SRC_ALL =	\
 		src/proto/screen.pro \
 		src/proto/search.pro \
 		src/proto/sha256.pro \
+		src/proto/sign.pro \
 		src/proto/spell.pro \
 		src/proto/spellfile.pro \
 		src/proto/syntax.pro \
@@ -199,6 +206,7 @@ SRC_ALL =	\
 		src/proto/term.pro \
 		src/proto/terminal.pro \
 		src/proto/termlib.pro \
+		src/proto/textprop.pro \
 		src/proto/ui.pro \
 		src/proto/undo.pro \
 		src/proto/userfunc.pro \
@@ -229,7 +237,7 @@ SRC_ALL =	\
 		src/libvterm/src/parser.c \
 		src/libvterm/src/pen.c \
 		src/libvterm/src/rect.h \
-		src/libvterm/src/screen.c \
+		src/libvterm/src/termscreen.c \
 		src/libvterm/src/state.c \
 		src/libvterm/src/unicode.c \
 		src/libvterm/src/utf8.h \
@@ -275,6 +283,22 @@ SRC_ALL =	\
 		src/libvterm/t/92lp1640917.test \
 		src/libvterm/t/harness.c \
 		src/libvterm/t/run-test.pl \
+		src/xdiff/COPYING \
+		src/xdiff/README.txt \
+		src/xdiff/xdiff.h \
+		src/xdiff/xdiffi.c \
+		src/xdiff/xdiffi.h \
+		src/xdiff/xemit.c \
+		src/xdiff/xemit.h \
+		src/xdiff/xhistogram.c \
+		src/xdiff/xinclude.h \
+		src/xdiff/xmacros.h \
+		src/xdiff/xpatience.c \
+		src/xdiff/xprepare.c \
+		src/xdiff/xprepare.h \
+		src/xdiff/xtypes.h \
+		src/xdiff/xutils.c \
+		src/xdiff/xutils.h \
 
 
 # source files for Unix only
@@ -291,7 +315,6 @@ SRC_UNIX =	\
 		src/INSTALLx.txt \
 		src/Makefile \
 		src/auto/configure \
-		src/config.aap.in \
 		src/config.h.in \
 		src/config.mk.dist \
 		src/config.mk.in \
@@ -316,8 +339,6 @@ SRC_UNIX =	\
 		src/gui_x11_pm.h \
 		src/hangulin.c \
 		src/if_xcmdsrv.c \
-		src/integration.c \
-		src/integration.h \
 		src/link.sh \
 		src/installman.sh \
 		src/installml.sh \
@@ -340,7 +361,6 @@ SRC_UNIX =	\
 		src/proto/if_xcmdsrv.pro \
 		src/proto/os_unix.pro \
 		src/proto/pty.pro \
-		src/proto/workshop.pro \
 		src/pty.c \
 		src/testdir/Makefile \
 		src/testdir/unix.vim \
@@ -350,10 +370,6 @@ SRC_UNIX =	\
 		src/vimtutor \
 		src/gvimtutor \
 		src/which.sh \
-		src/workshop.c \
-		src/workshop.h \
-		src/wsdebug.c \
-		src/wsdebug.h \
 		src/tee/Makefile \
 		src/xxd/Makefile \
 
@@ -459,8 +475,8 @@ SRC_DOS =	\
 		src/xxd/Make_mvc.mak \
 		nsis/gvim.nsi \
 		nsis/gvim_version.nsh \
-		nsis/vimrc.ini \
 		nsis/README.txt \
+		nsis/lang/*.nsi \
 		uninstal.txt \
 		src/VisVim/Commands.cpp \
 		src/VisVim/Commands.h \
@@ -499,8 +515,7 @@ SRC_DOS_BIN =	\
 		src/xpm/x86/lib/libXpm.a \
 		src/xpm/x86/lib/libXpm.lib \
 		src/xpm/x86/lib-vc14/libXpm.lib \
-		nsis/icons/*.bmp \
-		nsis/icons/*.ico \
+		nsis/icons.zip \
 
 # source files for Amiga, DOS, etc. (also in the extra archive)
 SRC_AMI_DOS =	\
@@ -612,7 +627,6 @@ RT_ALL =	\
 		runtime/macros/matchit.vim \
 		runtime/macros/maze/README.txt \
 		runtime/macros/maze/[mM]akefile \
-		runtime/macros/maze/main.aap \
 		runtime/macros/maze/maze.c \
 		runtime/macros/maze/maze_5.78 \
 		runtime/macros/maze/maze_mac \
@@ -640,6 +654,7 @@ RT_ALL =	\
 		runtime/tutor/tutor \
 		runtime/tutor/tutor.vim \
 		runtime/vimrc_example.vim \
+		runtime/pack/dist/opt/cfilter/plugin/cfilter.vim \
 		runtime/pack/dist/opt/dvorak/plugin/dvorak.vim \
 		runtime/pack/dist/opt/dvorak/dvorak/enable.vim \
 		runtime/pack/dist/opt/dvorak/dvorak/disable.vim \
@@ -648,6 +663,7 @@ RT_ALL =	\
 		runtime/pack/dist/opt/matchit/plugin/matchit.vim \
 		runtime/pack/dist/opt/matchit/doc/matchit.txt \
 		runtime/pack/dist/opt/matchit/doc/tags \
+		runtime/pack/dist/opt/matchit/autoload/*.vim \
 		runtime/pack/dist/opt/shellmenu/plugin/shellmenu.vim \
 		runtime/pack/dist/opt/swapmouse/plugin/swapmouse.vim \
 		runtime/pack/dist/opt/termdebug/plugin/termdebug.vim \
@@ -677,6 +693,11 @@ RT_SCRIPTS =	\
 		runtime/compiler/README.txt \
 		runtime/indent/*.vim \
 		runtime/indent/README.txt \
+		runtime/indent/Makefile \
+		runtime/indent/testdir/README.txt \
+		runtime/indent/testdir/*.vim \
+		runtime/indent/testdir/*.in \
+		runtime/indent/testdir/*.ok \
 		runtime/ftplugin/*.vim \
 		runtime/ftplugin/logtalk.dict \
 		runtime/ftplugin/README.txt \
@@ -813,8 +834,6 @@ EXTRA =		\
 		$(SRC_EXTRA) \
 		README_extra.txt \
 		src/VisVim/VisVim.dll \
-		farsi/README.txt \
-		farsi/fonts/*/far-* \
 		runtime/vimlogo.xpm \
 		src/tee/Makefile \
 		src/tee/Make_mvc.mak \

Makefile

@@ -32,13 +32,25 @@ first:
 
 # Some make programs use the last target for the $@ default; put the other
 # targets separately to always let $@ expand to "first" by default.
-all install uninstall tools config configure reconfig proto depend lint tags types test scripttests unittests testclean clean distclean:
+all install uninstall tools config configure reconfig proto depend lint tags types test scripttests test_libvterm unittests testclean clean distclean:
 	@if test ! -f src/auto/config.mk; then \
 		cp src/config.mk.dist src/auto/config.mk; \
 	fi
 	@echo "Starting make in the src directory."
 	@echo "If there are problems, cd to the src directory and run make there"
 	cd src && $(MAKE) $@
+	@# When the target is "test" also run the indent tests.
+	@if test "$@" = "test"; then \
+		$(MAKE) indenttest; \
+	fi
+
+# Executable used for running the indent tests.
+VIM_FOR_INDENTTEST = ../../src/vim
+
+indenttest:
+	cd runtime/indent && \
+		$(MAKE) clean VIM="$(VIM_FOR_INDENTTEST)" && \
+		$(MAKE) test VIM="$(VIM_FOR_INDENTTEST)"
 		
 
 #########################################################################
@@ -193,6 +205,7 @@ MINOR = 1
 # - Make sure there is a diff.exe two levels up (get it from a previous Vim
 #   version).  Also put winpty32.dll and winpty-agent.exe there.
 # - go to ../nsis and do:
+#   > unzip icons.zip
 #   > makensis gvim.nsi  (takes a few minutes).
 #      ignore warning for libwinpthread-1.dll
 # - Copy gvim##.exe to the dist directory.
@@ -456,11 +469,12 @@ dosrt_files: dist prepare no_title.vim
 	-rm $(IN_README_DIR)
 	mv dist/vim/$(VIMRTDIR)/runtime/* dist/vim/$(VIMRTDIR)
 	rmdir dist/vim/$(VIMRTDIR)/runtime
-# Add the message translations.  Trick: skip ja.mo and use ja.sjis.mo instead.
-# Same for cs.mo / cs.cp1250.mo, pl.mo / pl.cp1250.mo, sk.mo / sk.cp1250.mo,
-# zh_CN.mo / zh_CN.cp936.mo, uk.mo / uk.cp1251.mo and ru.mo / ru.cp1251.mo.
+# Add the message translations.  Trick: skip ja.mo/ja.euc-jp.mo and use
+# ja.sjis.mo instead.  Same for cs.mo / cs.cp1250.mo, pl.mo / pl.cp1250.mo,
+# sk.mo / sk.cp1250.mo, zh_CN.mo / zh_CN.cp936.mo, uk.mo / uk.cp1251.mo and
+# ru.mo / ru.cp1251.mo.
 	for i in $(LANG_DOS); do \
-	      if test "$$i" != "src/po/ja.mo" -a "$$i" != "src/po/pl.mo" -a "$$i" != "src/po/cs.mo" -a "$$i" != "src/po/sk.mo" -a "$$i" != "src/po/zh_CN.mo" -a "$$i" != "src/po/ru.mo" -a "$$i" != "src/po/uk.mo"; then \
+	      if test "$$i" != "src/po/ja.mo" -a "$$i" != "src/po/ja.euc-jp.mo" -a "$$i" != "src/po/pl.mo" -a "$$i" != "src/po/cs.mo" -a "$$i" != "src/po/sk.mo" -a "$$i" != "src/po/zh_CN.mo" -a "$$i" != "src/po/ru.mo" -a "$$i" != "src/po/uk.mo"; then \
 		n=`echo $$i | sed -e "s+src/po/\([-a-zA-Z0-9_]*\(.UTF-8\)*\)\(.sjis\)*\(.cp1250\)*\(.cp1251\)*\(.cp936\)*.mo+\1+"`; \
 		mkdir dist/vim/$(VIMRTDIR)/lang/$$n; \
 		mkdir dist/vim/$(VIMRTDIR)/lang/$$n/LC_MESSAGES; \

README.md

@@ -1,12 +1,12 @@
 ![Vim Logo](https://github.com/vim/vim/blob/master/runtime/vimlogo.gif)
 
 [![Build Status](https://travis-ci.org/vim/vim.svg?branch=master)](https://travis-ci.org/vim/vim)
-[![Coverage Status](https://codecov.io/gh/vim/vim/coverage.svg?branch=master)](https://codecov.io/gh/vim/vim?branch=master)
-[![Coverage Status](https://coveralls.io/repos/vim/vim/badge.svg?branch=master&service=github)](https://coveralls.io/github/vim/vim?branch=master)
 [![Appveyor Build status](https://ci.appveyor.com/api/projects/status/o2qht2kjm02sgghk?svg=true)](https://ci.appveyor.com/project/chrisbra/vim)
+[![Coverage Status](https://codecov.io/gh/vim/vim/coverage.svg?branch=master)](https://codecov.io/gh/vim/vim?branch=master)
 [![Coverity Scan](https://scan.coverity.com/projects/241/badge.svg)](https://scan.coverity.com/projects/vim)
 [![Language Grade: C/C++](https://img.shields.io/lgtm/grade/cpp/g/vim/vim.svg?logo=lgtm&logoWidth=18)](https://lgtm.com/projects/g/vim/vim/context:cpp)
 [![Debian CI](https://badges.debian.net/badges/debian/testing/vim/version.svg)](https://buildd.debian.org/vim)
+[![Packages](https://repology.org/badge/tiny-repos/vim.svg)](https://repology.org/metapackage/vim)
 
 
 ## What is Vim? ##

READMEdir/README_os390.txt

@@ -1,4 +1,4 @@
-README_zOS.txt for version 8.1 of Vim: Vi IMproved.
+README_os390.txt for version 8.1 of Vim: Vi IMproved.
 
 This readme explains how to build Vim on z/OS.  Formerly called OS/390.
 See "README.txt" for general information about Vim.

appveyor.yml

@@ -19,7 +19,7 @@ before_build:
   - 'set INCLUDE=%INCLUDE%C:\Program Files (x86)\Windows Kits\8.1\Include\um'
 
 build_script:
-  - src/appveyor.bat
+  - ci/appveyor.bat
 
 test_script:
   - cd src/testdir

ci/appveyor.bat

@@ -7,7 +7,7 @@ cd %APPVEYOR_BUILD_FOLDER%
 cd src
 echo "Building MinGW 32bit console version"
 set PATH=c:\msys64\mingw32\bin;%PATH%
-mingw32-make.exe -f Make_ming.mak GUI=no OPTIMIZE=speed IME=yes MBYTE=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
+mingw32-make.exe -f Make_ming.mak GUI=no OPTIMIZE=speed IME=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
 :: Save vim.exe before Make clean, moved back below.
 copy vim.exe testdir
 mingw32-make.exe -f Make_ming.mak clean
@@ -16,24 +16,24 @@ mingw32-make.exe -f Make_ming.mak clean
 :: with specified features without python.
 echo "Building MinGW 32bit GUI version"
 if "%FEATURE%" == "HUGE" (
-    mingw32-make.exe -f Make_ming.mak OPTIMIZE=speed CHANNEL=yes GUI=yes IME=yes MBYTE=yes ICONV=yes DEBUG=no PYTHON_VER=27 DYNAMIC_PYTHON=yes PYTHON=C:\Python27 PYTHON3_VER=35 DYNAMIC_PYTHON3=yes PYTHON3=C:\Python35 FEATURES=%FEATURE% || exit 1
+    mingw32-make.exe -f Make_ming.mak OPTIMIZE=speed CHANNEL=yes GUI=yes IME=yes ICONV=yes DEBUG=no PYTHON_VER=27 DYNAMIC_PYTHON=yes PYTHON=C:\Python27 PYTHON3_VER=35 DYNAMIC_PYTHON3=yes PYTHON3=C:\Python35 FEATURES=%FEATURE% || exit 1
 ) ELSE (
-    mingw32-make.exe -f Make_ming.mak OPTIMIZE=speed GUI=yes IME=yes MBYTE=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
+    mingw32-make.exe -f Make_ming.mak OPTIMIZE=speed GUI=yes IME=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
 )
 .\gvim -u NONE -c "redir @a | ver |0put a | wq" ver_ming.txt
 
 echo "Building MSVC 64bit console Version"
 sed -e "s/\$(LINKARGS2)/\$(LINKARGS2) | sed -e 's#.*\\\\r.*##'/" Make_mvc.mak > Make_mvc2.mak
-nmake -f Make_mvc2.mak CPU=AMD64 OLE=no GUI=no IME=yes MBYTE=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
+nmake -f Make_mvc2.mak CPU=AMD64 OLE=no GUI=no IME=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
 nmake -f Make_mvc2.mak clean
 
 :: build MSVC huge version with python and channel support
 :: GUI needs to be last, so that testing works
 echo "Building MSVC 64bit GUI Version"
 if "%FEATURE%" == "HUGE" (
-    nmake -f Make_mvc2.mak DIRECTX=yes CPU=AMD64 CHANNEL=yes OLE=no GUI=yes IME=yes MBYTE=yes ICONV=yes DEBUG=no PYTHON_VER=27 DYNAMIC_PYTHON=yes PYTHON=C:\Python27-x64 PYTHON3_VER=35 DYNAMIC_PYTHON3=yes PYTHON3=C:\Python35-x64 FEATURES=%FEATURE% || exit 1
+    nmake -f Make_mvc2.mak DIRECTX=yes CPU=AMD64 CHANNEL=yes OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no PYTHON_VER=27 DYNAMIC_PYTHON=yes PYTHON=C:\Python27-x64 PYTHON3_VER=35 DYNAMIC_PYTHON3=yes PYTHON3=C:\Python35-x64 FEATURES=%FEATURE% || exit 1
 ) ELSE (
-    nmake -f Make_mvc2.mak CPU=AMD64 OLE=no GUI=yes IME=yes MBYTE=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
+    nmake -f Make_mvc2.mak CPU=AMD64 OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
 )
 .\gvim -u NONE -c "redir @a | ver |0put a | wq" ver_msvc.txt
 

farsi/README.txt

@@ -1,2 +0,0 @@
-For information about installation of Farsi fonts and Vim usage in Farsi mode,
-refer to the Farsi help file by typing ":help farsi" in Vim.

nsis/README.txt

@@ -15,6 +15,7 @@ To build the installable .exe:
 	vimrun.exe,
 	install.exe,
 	uninstal.exe,
+	tee/tee.exe,
 	xxd/xxd.exe,
 
     Then execute tools/rename.bat to rename the executables. (mv command is
@@ -29,14 +30,15 @@ To build the installable .exe:
 4.  Go to the VisVim directory and build VisVim.dll (or get it from a binary
     archive).
 
-5.  Go to the OleVim directory and build OpenWithVim.exe and SendToVim.exe (or
-    get them from a binary archive).
-
-6.  Get a "diff.exe" program and put it in the "../.." directory (above the
-    "vim80" directory, it's the same for all Vim versions).
+5.  Get a "diff.exe" program.  If you skip this the built-in diff will always
+    be used (which is fine for most users).  If you do have your own
+    "diff.exe" put it in the "../.." directory (above the "vim81" directory,
+    it's the same for all Vim versions).
     You can find one in previous Vim versions or in this archive:
 		http://www.mossbayeng.com/~ron/vim/diffutils.tar.gz
-    Also put winpty32.dll and winpty-agent.exe there.
+
+6   Also put winpty32.dll and winpty-agent.exe in "../.." (above the "vim81"
+    directory).  This is required for the terminal window.
 
 7.  Do "make uganda.nsis.txt" in runtime/doc.  This requires sed, you may have
     to do this on Unix.  Make sure the file is in DOS file format!
@@ -65,6 +67,11 @@ To build the installable .exe:
 Install NSIS if you didn't do that already.
 Also install UPX, if you want a compressed file.
 
+Unpack the images:
+	cd nsis
+	unzip icons.zip
+
 To build then, enter:
 
+	cd nsis
 	makensis gvim.nsi

nsis/lang/danish.nsi

@@ -0,0 +1,175 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# danish.nsi: Danish language strings for gvim NSIS installer.
+#
+# Locale ID    : 1030
+# fileencoding : UTF-8
+# Author       : scootergrisen
+
+!insertmacro MUI_LANGUAGE "Danish"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_DANISH}         "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_DANISH}         "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_DANISH}     "Destinationsmappe (skal slutte med $\"vim$\")"
+
+LangString str_show_readme          ${LANG_DANISH}     "Vis README efter installationen er gennemført"
+
+# Install types:
+LangString str_type_typical         ${LANG_DANISH}     "Typisk"
+
+LangString str_type_minimal         ${LANG_DANISH}     "Minimal"
+
+LangString str_type_full            ${LANG_DANISH}     "Fuld"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_DANISH}     "Afinstaller eksisterende version(er)"
+LangString str_desc_old_ver         ${LANG_DANISH}     "Afinstaller eksisterende Vim-version(er) fra dit system."
+
+LangString str_section_exe          ${LANG_DANISH}     "Vim GUI og afviklingsfiler"
+LangString str_desc_exe             ${LANG_DANISH}     "Vim GUI-eksekverbare- og afviklingsfiler. Komponenten kræves."
+
+LangString str_section_console      ${LANG_DANISH}     "Vim-konsolprogram"
+LangString str_desc_console         ${LANG_DANISH}     "Konsolversion af Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_DANISH}     "Opret .bat-filer"
+LangString str_desc_batch           ${LANG_DANISH}     "Opret .bat-filer til Vim-varianter i Windows-mappen til brug fra kommandolinjen."
+
+LangString str_group_icons          ${LANG_DANISH}     "Opret ikoner til Vim"
+LangString str_desc_icons           ${LANG_DANISH}     "Opret ikoner til Vim diverse steder for at hjælpe med at gøre adgangen let."
+
+LangString str_section_desktop      ${LANG_DANISH}     "På skrivebordet"
+LangString str_desc_desktop         ${LANG_DANISH}     "Opret ikoner til gVim-eksekverbare på skrivebordet."
+
+LangString str_section_start_menu   ${LANG_DANISH}     "I Programmer-mappen i menuen Start"
+LangString str_desc_start_menu      ${LANG_DANISH}     "Tilføj Vim i Programmer-mappen i menuen Start."
+
+#LangString str_section_quick_launch ${LANG_DANISH}     "I værktøjslinjen Hurtig start"
+#LangString str_desc_quick_launch    ${LANG_DANISH}     "Tilføj Vim-genvej i værktøjslinjen Hurtig start."
+
+LangString str_section_edit_with    ${LANG_DANISH}     "Tilføj Vim-genvejsmenu"
+LangString str_desc_edit_with       ${LANG_DANISH}     "Tilføj Vim til listen i $\"Åbn med...$\"-genvejsmenuen."
+
+#LangString str_section_edit_with32  ${LANG_DANISH}     "32-bit-version"
+#LangString str_desc_edit_with32     ${LANG_DANISH}     "Tilføj Vim til listen i $\"Åbn med...$\"-genvejsmenuen for 32-bit-programmer."
+
+#LangString str_section_edit_with64  ${LANG_DANISH}     "64-bit-version"
+#LangString str_desc_edit_with64     ${LANG_DANISH}     "Tilføj Vim til listen i $\"Åbn med...$\"-genvejsmenuen for 64-bit-programmer."
+
+LangString str_section_vim_rc       ${LANG_DANISH}     "Opret standardkonfiguration"
+LangString str_desc_vim_rc          ${LANG_DANISH}     "Opret en standardkonfigurationsfil (_vimrc) hvis der ikke allerede findes en."
+
+LangString str_group_plugin         ${LANG_DANISH}     "Opret plugin-mapper"
+LangString str_desc_plugin          ${LANG_DANISH}     "Opret plugin-mapper. Plugin-mapper giver mulighed for at udvide Vim ved at slippe en fil i en mappen."
+
+LangString str_section_plugin_home  ${LANG_DANISH}     "Private"
+LangString str_desc_plugin_home     ${LANG_DANISH}     "Opret plugin-mapper i HOME (hvis du har defineret et) eller Vim-installationsmappe."
+
+LangString str_section_plugin_vim   ${LANG_DANISH}     "Delte"
+LangString str_desc_plugin_vim      ${LANG_DANISH}     "Opret plugin-mapper i Vim-installationsmappe, det bruges af alle på systemet."
+
+LangString str_section_vis_vim      ${LANG_DANISH}     "VisVim-udvidelser"
+LangString str_desc_vis_vim         ${LANG_DANISH}     "VisVim-udvidelser til integrering i Microsoft Visual Studio."
+
+LangString str_section_nls          ${LANG_DANISH}     "Understøttelse af modersmål"
+LangString str_desc_nls             ${LANG_DANISH}     "Installer filer til understøttelse af modersmål."
+
+LangString str_unsection_register   ${LANG_DANISH}     "Afregistrer Vim"
+LangString str_desc_unregister      ${LANG_DANISH}     "Afregistrer Vim fra systemet."
+
+LangString str_unsection_exe        ${LANG_DANISH}     "Fjern Vim-eksekverbare-/afviklingsfiler"
+LangString str_desc_rm_exe          ${LANG_DANISH}     "Fjern alle Vim-eksekverbare- og afviklingsfiler."
+
+LangString str_ungroup_plugin       ${LANG_DANISH}     "Fjern plugin-mapper"
+LangString str_desc_rm_plugin       ${LANG_DANISH}     "Fjern plugin-mapperne, hvis de er tomme."
+
+LangString str_unsection_plugin_home ${LANG_DANISH}     "Private"
+LangString str_desc_rm_plugin_home  ${LANG_DANISH}     "Fjern plugin-mapperne fra HOME-mappen."
+
+LangString str_unsection_plugin_vim ${LANG_DANISH}     "Delte"
+LangString str_desc_rm_plugin_vim   ${LANG_DANISH}     "Fjern plugin-mapperne fra Vim-installationsmappen."
+
+LangString str_unsection_rootdir    ${LANG_DANISH}     "Fjern Vim-rodmappen"
+LangString str_desc_rm_rootdir      ${LANG_DANISH}     "Fjern Vim-rodmappen. Den indeholder dine Vim-konfigurationsfiler!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_DANISH}     "Fandt $vim_old_ver_count Vim-versioner på dit system.$\r$\nInstallationsguiden kan højst håndtere ${VIM_MAX_OLD_VER}-versioner.$\r$\nFjern venligst nogle versioner og start igen."
+
+#LangString str_msg_invalid_root  ${LANG_DANISH}     "Ugyldig installationssti: $vim_install_root!$\r$\nDen skal slutte med $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_DANISH}     "Uoverensstemmelse i binære sti!$\r$\n$\r$\nForventede at den binære sti var $\"$vim_bin_path$\",$\r$\nmen systemet indikerer at den binære sti er $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_DANISH}     "Vim kører stadig på dit system.$\r$\nLuk venligst alle instanser af Vim inden du fortsætter."
+
+#LangString str_msg_register_ole  ${LANG_DANISH}     "Forsøger at registrere Vim med OLE. Der er ingen meddelelse til at indikere om det virker eller ej."
+
+#LangString str_msg_unreg_ole     ${LANG_DANISH}     "Forsøger at afregistrere Vim med OLE. Der er ingen meddelelse til at indikere om det virker eller ej."
+
+#LangString str_msg_rm_start      ${LANG_DANISH}     "Afinstallerer følgende version:"
+
+#LangString str_msg_rm_fail       ${LANG_DANISH}     "Kunne ikke afinstallere følgende version:"
+
+#LangString str_msg_no_rm_key     ${LANG_DANISH}     "Kan ikke finde registreringsdatabasenøgle for afinstallationsguiden."
+
+#LangString str_msg_no_rm_reg     ${LANG_DANISH}     "Kan ikke finde afinstallationsguiden fra registreringsdatabasen."
+
+#LangString str_msg_no_rm_exe     ${LANG_DANISH}     "Kan ikke tilgå afinstallationsguide."
+
+#LangString str_msg_rm_copy_fail  ${LANG_DANISH}     "Kunne ikke kopiere afinstallationsguide til midlertidig mappe."
+
+#LangString str_msg_rm_run_fail   ${LANG_DANISH}     "Kunne ikke køre afinstallationsguide."
+
+#LangString str_msg_abort_install ${LANG_DANISH}     "Installationsguiden vil afbryde."
+
+LangString str_msg_install_fail  ${LANG_DANISH}     "Installationen mislykkedes. Bedre held næste gang."
+
+LangString str_msg_rm_exe_fail   ${LANG_DANISH}     "Nogle filer i $0 er ikke blevet slettet!$\r$\nDu skal gøre det manuelt."
+
+#LangString str_msg_rm_root_fail  ${LANG_DANISH}     "ADVARSEL: Kan ikke fjerne $\"$vim_install_root$\", den er ikke tom!"
+
+LangString str_msg_uninstalling  ${LANG_DANISH}     "Afinstallerer den gamle version..."
+
+LangString str_msg_registering   ${LANG_DANISH}     "Registrerer..."
+
+LangString str_msg_unregistering ${LANG_DANISH}     "Afregistrerer..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_DANISH}     "Vælg _vimrc-indstillinger"
+LangString str_vimrc_page_subtitle ${LANG_DANISH}     "Vælg indstillingerne til forbedring, tastatur og mus."
+
+LangString str_msg_compat_title    ${LANG_DANISH}     " Vi- / Vim-opførsel "
+LangString str_msg_compat_desc     ${LANG_DANISH}     "&Kompatibilitet og forbedringer"
+LangString str_msg_compat_vi       ${LANG_DANISH}     "Vi-kompatibel"
+LangString str_msg_compat_vim      ${LANG_DANISH}     "Vim original"
+LangString str_msg_compat_defaults ${LANG_DANISH}     "Vim med nogle forbedringer (indlæs defaults.vim)"
+LangString str_msg_compat_all      ${LANG_DANISH}     "Vim med alle forbedringer (indlæs vimrc_example.vim) (standard)"
+
+LangString str_msg_keymap_title   ${LANG_DANISH}     " Tilknytninger "
+LangString str_msg_keymap_desc    ${LANG_DANISH}     "&Gentilknyt nogle få taster for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F osv.)"
+LangString str_msg_keymap_default ${LANG_DANISH}     "Gentilknyt ikke taster (standard)"
+LangString str_msg_keymap_windows ${LANG_DANISH}     "Gentilknyt nogle få taster"
+
+LangString str_msg_mouse_title   ${LANG_DANISH}     " Mus "
+LangString str_msg_mouse_desc    ${LANG_DANISH}     "&Opførsel af højre og venstre knapper"
+LangString str_msg_mouse_default ${LANG_DANISH}     "Højre: genvejsmenu, venstre: visuel tilstand (standard)"
+LangString str_msg_mouse_windows ${LANG_DANISH}     "Højre: genvejsmenu, venstre: vælg-tilstand (Windows)"
+LangString str_msg_mouse_unix    ${LANG_DANISH}     "Højre: udvider markering, venstre: visuel tilstand (Unix)"

nsis/lang/dutch.nsi

@@ -0,0 +1,281 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# dutch.nsi : Dutch language strings for gvim NSIS installer.
+#
+# Locale ID    : 1043
+# Locale Name  : nl
+# fileencoding : UTF-8
+# Author       : Peter Odding <peter@peterodding.com>
+
+!insertmacro MUI_LANGUAGE "Dutch"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_DUTCH} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_DUTCH} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_DUTCH} \
+#    "Doelmap (moet eindigen op $\"vim$\")"
+
+LangString str_show_readme          ${LANG_DUTCH} \
+    "README weergeven na installatie"
+
+# Install types:
+LangString str_type_typical         ${LANG_DUTCH} \
+    "Gebruikelijk"
+
+LangString str_type_minimal         ${LANG_DUTCH} \
+    "Minimaal"
+
+LangString str_type_full            ${LANG_DUTCH} \
+    "Volledig"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_DUTCH} \
+    "Bestaande versie(s) de-installeren"
+LangString str_desc_old_ver         ${LANG_DUTCH} \
+    "Bestaande Vim versie(s) van je systeem verwijderen."
+
+LangString str_section_exe          ${LANG_DUTCH} \
+    "Vim GUI"
+LangString str_desc_exe             ${LANG_DUTCH} \
+    "Vim GUI uitvoerbare bestanden en runtime bestanden.  Dit component is vereist."
+
+LangString str_section_console      ${LANG_DUTCH} \
+    "Vim console programma"
+LangString str_desc_console         ${LANG_DUTCH} \
+    "Console versie van Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_DUTCH} \
+    "Creëer .bat bestanden"
+LangString str_desc_batch           ${LANG_DUTCH} \
+    "Creëer .bat bestanden voor Vim varianten in de Windows map voor \
+     commando regel gebruik."
+
+LangString str_group_icons          ${LANG_DUTCH} \
+    "Creëer pictogrammen for Vim"
+LangString str_desc_icons           ${LANG_DUTCH} \
+    "Creëer pictogrammen voor Vim op verschillende locaties voor gemakkelijke toegang."
+
+LangString str_section_desktop      ${LANG_DUTCH} \
+    "Op het bureaublad"
+LangString str_desc_desktop         ${LANG_DUTCH} \
+    "Creëer pictogrammen voor Vim uitvoerbare bestanden op het bureaublad."
+
+LangString str_section_start_menu   ${LANG_DUTCH} \
+    "In de Programma's map in het start menu"
+LangString str_desc_start_menu      ${LANG_DUTCH} \
+    "Voeg Vim toe aan de programma's map in het start menu.  \
+     Van toepassing op Windows 95 en later."
+
+#LangString str_section_quick_launch ${LANG_DUTCH} \
+#    "In de snel starten balk"
+#LangString str_desc_quick_launch    ${LANG_DUTCH} \
+#    "Voeg Vim snelkoppeling toe aan de snel starten balk."
+
+LangString str_section_edit_with    ${LANG_DUTCH} \
+    "Voeg Vim contextmenu toe"
+LangString str_desc_edit_with       ${LANG_DUTCH} \
+    "Voeg Vim toe aan de $\"Openen met...$\" contextmenu lijst."
+
+#LangString str_section_edit_with32  ${LANG_DUTCH} \
+#    "32-bit versie"
+#LangString str_desc_edit_with32     ${LANG_DUTCH} \
+#    "Voeg Vim toe aan de $\"Openen met...$\" contextmenu lijst \
+#     voor 32-bit toepassingen."
+
+#LangString str_section_edit_with64  ${LANG_DUTCH} \
+#    "64-bit versie"
+#LangString str_desc_edit_with64     ${LANG_DUTCH} \
+#    "Voeg Vim toe aan de $\"Openen met...$\" contextmenu lijst \
+#     voor 64-bit toepassingen."
+
+LangString str_section_vim_rc       ${LANG_DUTCH} \
+    "Creëer standaard configuratie"
+LangString str_desc_vim_rc          ${LANG_DUTCH} \
+    "Creëer een standaard configuratie bestand (_vimrc) als er nog geen bestaat."
+
+LangString str_group_plugin         ${LANG_DUTCH} \
+    "Creëer Plugin mappen"
+LangString str_desc_plugin          ${LANG_DUTCH} \
+    "Creëer plugin mappen.  Plugin mappen maken het mogelijk om \
+     Vim uit te breiden door een bestand in een map te plaatsen."
+
+LangString str_section_plugin_home  ${LANG_DUTCH} \
+    "Privé"
+LangString str_desc_plugin_home     ${LANG_DUTCH} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_DUTCH} \
+    "Gedeeld"
+LangString str_desc_plugin_vim      ${LANG_DUTCH} \
+    "Creëer plugin mappen in Vim installatie map, deze worden gebruikt \
+     voor iedereen op het systeem."
+
+LangString str_section_vis_vim      ${LANG_DUTCH} \
+    "VisVim extensie"
+LangString str_desc_vis_vim         ${LANG_DUTCH} \
+    "VisVim extensie voor Microsoft Visual Studio integratie."
+
+LangString str_section_nls          ${LANG_DUTCH} \
+    "Ondersteuning voor andere talen"
+LangString str_desc_nls             ${LANG_DUTCH} \
+    "Bestanden voor ondersteuning van andere talen dan Engels installeren."
+
+LangString str_unsection_register   ${LANG_DUTCH} \
+    "Vim afmelden"
+LangString str_desc_unregister      ${LANG_DUTCH} \
+    "Registratie van Vim in het systeem ongedaan maken."
+
+LangString str_unsection_exe        ${LANG_DUTCH} \
+    "Vim uitvoerbare/runtime bestanden verwijderen"
+LangString str_desc_rm_exe          ${LANG_DUTCH} \
+    "Verwijder alle Vim uitvoerbare bestanden en runtime bestanden."
+
+LangString str_ungroup_plugin       ${LANG_DUTCH} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_DUTCH} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_DUTCH} \
+    "Privé"
+LangString str_desc_rm_plugin_home  ${LANG_DUTCH} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_DUTCH} \
+    "Gedeeld"
+LangString str_desc_rm_plugin_vim   ${LANG_DUTCH} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_DUTCH} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_DUTCH} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_DUTCH} \
+#    "Er zijn $vim_old_ver_count Vim versies op je systeem gevonden.$\r$\n\
+#     Deze installatie kan omgaan met maximaal ${VIM_MAX_OLD_VER} versies.$\r$\n\
+#     Verwijder a.u.b. wat versies en probeer het dan opnieuw."
+
+#LangString str_msg_invalid_root  ${LANG_DUTCH} \
+#    "Ongeldig installatiepad: $vim_install_root!$\r$\n\
+#     Het moet eindelijk op $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_DUTCH} \
+#    "Binair pad onjuist!$\r$\n$\r$\n\
+#     Het binaire pad zou $\"$vim_bin_path$\" moeten zijn,$\r$\n\
+#     maar het systeem geeft aan dat het binaire pad $\"$INSTDIR$\" is."
+
+#LangString str_msg_vim_running   ${LANG_DUTCH} \
+#    "Vim is nog actief op je systeem.$\r$\n\
+#     Sluit a.u.b. alle instanties van Vim voordat je verder gaat."
+
+#LangString str_msg_register_ole  ${LANG_DUTCH} \
+#    "Bezig met proberen om Vim te registreren met OLE. \
+#     Er is geen bericht dat aangeeft of deze operatie slaagt."
+
+#LangString str_msg_unreg_ole     ${LANG_DUTCH} \
+#    "Bezig met proberen om Vim te de-registreren met OLE. \
+#     Er is geen bericht dat aangeeft of deze operatie slaagt."
+
+#LangString str_msg_rm_start      ${LANG_DUTCH} \
+#    "De volgende versies worden verwijderd:"
+
+#LangString str_msg_rm_fail       ${LANG_DUTCH} \
+#    "De volgende versies konden niet worden verwijderd:"
+
+#LangString str_msg_no_rm_key     ${LANG_DUTCH} \
+#    "Kan de uninstaller register sleutel niet vinden."
+
+#LangString str_msg_no_rm_reg     ${LANG_DUTCH} \
+#    "Kan de uninstaller niet vinden via het register."
+
+#LangString str_msg_no_rm_exe     ${LANG_DUTCH} \
+#    "Kan geen toegang krijgen tot de uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_DUTCH} \
+#    "Kon de uninstaller niet naar een tijdelijke map kopiëren."
+
+#LangString str_msg_rm_run_fail   ${LANG_DUTCH} \
+#    "Kon de uninstaller niet uitvoeren."
+
+#LangString str_msg_abort_install ${LANG_DUTCH} \
+#    "Installatie wordt gestopt."
+
+LangString str_msg_install_fail  ${LANG_DUTCH} \
+    "Installatie is mislukt."
+
+LangString str_msg_rm_exe_fail   ${LANG_DUTCH} \
+    "Sommige bestanden in $0 zijn niet verwijderd!$\r$\n\
+     Dit moet je handmatig doen."
+
+#LangString str_msg_rm_root_fail  ${LANG_DUTCH} \
+#    "WAARSCHUWING: Kan $\"$vim_install_root$\" niet verwijderen omdat het niet leeg is!"
+
+LangString str_msg_uninstalling  ${LANG_DUTCH} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_DUTCH} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_DUTCH} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_DUTCH} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_DUTCH} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_DUTCH} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_DUTCH} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_DUTCH} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_DUTCH} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_DUTCH} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_DUTCH} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_DUTCH} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_DUTCH} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_DUTCH} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_DUTCH} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_DUTCH} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_DUTCH} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_DUTCH} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_DUTCH} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_DUTCH} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/lang/english.nsi

@@ -0,0 +1,280 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# english.nsi: English language strings for gvim NSIS installer.
+#
+# Locale ID    : 1033
+# fileencoding : UTF-8
+# Author       : Guopeng Wen, Ken Takata
+
+!insertmacro MUI_LANGUAGE "English"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_ENGLISH} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_ENGLISH} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_ENGLISH} \
+#    "Destination Folder (Must end with $\"vim$\")"
+
+LangString str_show_readme          ${LANG_ENGLISH} \
+    "Show README after installation finish"
+
+# Install types:
+LangString str_type_typical         ${LANG_ENGLISH} \
+    "Typical"
+
+LangString str_type_minimal         ${LANG_ENGLISH} \
+    "Minimal"
+
+LangString str_type_full            ${LANG_ENGLISH} \
+    "Full"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_ENGLISH} \
+    "Uninstall Existing Version(s)"
+LangString str_desc_old_ver         ${LANG_ENGLISH} \
+    "Uninstall existing Vim version(s) from your system."
+
+LangString str_section_exe          ${LANG_ENGLISH} \
+    "Vim GUI and runtime files"
+LangString str_desc_exe             ${LANG_ENGLISH} \
+    "Vim GUI executables and runtime files.  This component is required."
+
+LangString str_section_console      ${LANG_ENGLISH} \
+    "Vim console program"
+LangString str_desc_console         ${LANG_ENGLISH} \
+    "Console version of Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_ENGLISH} \
+    "Create .bat files"
+LangString str_desc_batch           ${LANG_ENGLISH} \
+    "Create .bat files for Vim variants in the Windows directory for \
+     command line use."
+
+LangString str_group_icons          ${LANG_ENGLISH} \
+    "Create icons for Vim"
+LangString str_desc_icons           ${LANG_ENGLISH} \
+    "Create icons for Vim at various locations to facilitate easy access."
+
+LangString str_section_desktop      ${LANG_ENGLISH} \
+    "On the Desktop"
+LangString str_desc_desktop         ${LANG_ENGLISH} \
+    "Create icons for gVim executables on the desktop."
+
+LangString str_section_start_menu   ${LANG_ENGLISH} \
+    "In the Start Menu Programs Folder"
+LangString str_desc_start_menu      ${LANG_ENGLISH} \
+    "Add Vim in the programs folder of the start menu."
+
+#LangString str_section_quick_launch ${LANG_ENGLISH} \
+#    "In the Quick Launch Bar"
+#LangString str_desc_quick_launch    ${LANG_ENGLISH} \
+#    "Add Vim shortcut in the quick launch bar."
+
+LangString str_section_edit_with    ${LANG_ENGLISH} \
+    "Add Vim Context Menu"
+LangString str_desc_edit_with       ${LANG_ENGLISH} \
+    "Add Vim to the $\"Open With...$\" context menu list."
+
+#LangString str_section_edit_with32  ${LANG_ENGLISH} \
+#    "32-bit Version"
+#LangString str_desc_edit_with32     ${LANG_ENGLISH} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 32-bit applications."
+
+#LangString str_section_edit_with64  ${LANG_ENGLISH} \
+#    "64-bit Version"
+#LangString str_desc_edit_with64     ${LANG_ENGLISH} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 64-bit applications."
+
+LangString str_section_vim_rc       ${LANG_ENGLISH} \
+    "Create Default Config"
+LangString str_desc_vim_rc          ${LANG_ENGLISH} \
+    "Create a default config file (_vimrc) if one does not already exist."
+
+LangString str_group_plugin         ${LANG_ENGLISH} \
+    "Create Plugin Directories"
+LangString str_desc_plugin          ${LANG_ENGLISH} \
+    "Create plugin directories.  Plugin directories allow extending Vim \
+     by dropping a file into a directory."
+
+LangString str_section_plugin_home  ${LANG_ENGLISH} \
+    "Private"
+LangString str_desc_plugin_home     ${LANG_ENGLISH} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_ENGLISH} \
+    "Shared"
+LangString str_desc_plugin_vim      ${LANG_ENGLISH} \
+    "Create plugin directories in Vim install directory, it is used for \
+     everybody on the system."
+
+LangString str_section_vis_vim      ${LANG_ENGLISH} \
+    "VisVim Extension"
+LangString str_desc_vis_vim         ${LANG_ENGLISH} \
+    "VisVim Extension for Microsoft Visual Studio integration."
+
+LangString str_section_nls          ${LANG_ENGLISH} \
+    "Native Language Support"
+LangString str_desc_nls             ${LANG_ENGLISH} \
+    "Install files for native language support."
+
+LangString str_unsection_register   ${LANG_ENGLISH} \
+    "Unregister Vim"
+LangString str_desc_unregister      ${LANG_ENGLISH} \
+    "Unregister Vim from the system."
+
+LangString str_unsection_exe        ${LANG_ENGLISH} \
+    "Remove Vim Executables/Runtime Files"
+LangString str_desc_rm_exe          ${LANG_ENGLISH} \
+    "Remove all Vim executables and runtime files."
+
+LangString str_ungroup_plugin       ${LANG_ENGLISH} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_ENGLISH} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_ENGLISH} \
+    "Private"
+LangString str_desc_rm_plugin_home  ${LANG_ENGLISH} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_ENGLISH} \
+    "Shared"
+LangString str_desc_rm_plugin_vim   ${LANG_ENGLISH} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_ENGLISH} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_ENGLISH} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_ENGLISH} \
+#    "Found $vim_old_ver_count Vim versions on your system.$\r$\n\
+#     This installer can only handle ${VIM_MAX_OLD_VER} versions \
+#     at most.$\r$\n\
+#     Please remove some versions and start again."
+
+#LangString str_msg_invalid_root  ${LANG_ENGLISH} \
+#    "Invalid install path: $vim_install_root!$\r$\n\
+#     It should end with $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_ENGLISH} \
+#    "Binary path mismatch!$\r$\n$\r$\n\
+#     Expect the binary path to be $\"$vim_bin_path$\",$\r$\n\
+#     but system indicates the binary path is $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_ENGLISH} \
+#    "Vim is still running on your system.$\r$\n\
+#     Please close all instances of Vim before you continue."
+
+#LangString str_msg_register_ole  ${LANG_ENGLISH} \
+#    "Attempting to register Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_unreg_ole     ${LANG_ENGLISH} \
+#    "Attempting to unregister Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_rm_start      ${LANG_ENGLISH} \
+#    "Uninstalling the following version:"
+
+#LangString str_msg_rm_fail       ${LANG_ENGLISH} \
+#    "Fail to uninstall the following version:"
+
+#LangString str_msg_no_rm_key     ${LANG_ENGLISH} \
+#    "Cannot find uninstaller registry key."
+
+#LangString str_msg_no_rm_reg     ${LANG_ENGLISH} \
+#    "Cannot find uninstaller from registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_ENGLISH} \
+#    "Cannot access uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_ENGLISH} \
+#    "Fail to copy uninstaller to temporary directory."
+
+#LangString str_msg_rm_run_fail   ${LANG_ENGLISH} \
+#    "Fail to run uninstaller."
+
+#LangString str_msg_abort_install ${LANG_ENGLISH} \
+#    "Installer will abort."
+
+LangString str_msg_install_fail  ${LANG_ENGLISH} \
+    "Installation failed. Better luck next time."
+
+LangString str_msg_rm_exe_fail   ${LANG_ENGLISH} \
+    "Some files in $0 have not been deleted!$\r$\n\
+     You must do it manually."
+
+#LangString str_msg_rm_root_fail  ${LANG_ENGLISH} \
+#    "WARNING: Cannot remove $\"$vim_install_root$\", it is not empty!"
+
+LangString str_msg_uninstalling  ${LANG_ENGLISH} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_ENGLISH} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_ENGLISH} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_ENGLISH} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_ENGLISH} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_ENGLISH} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_ENGLISH} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_ENGLISH} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_ENGLISH} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_ENGLISH} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_ENGLISH} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_ENGLISH} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_ENGLISH} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_ENGLISH} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_ENGLISH} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_ENGLISH} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_ENGLISH} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_ENGLISH} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_ENGLISH} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_ENGLISH} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/lang/german.nsi

@@ -0,0 +1,280 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# german.nsi : German language strings for gvim NSIS installer.
+#
+# Locale ID    : 1031
+# fileencoding : UTF-8
+# Author       : Christian Brabandt, tux
+
+!insertmacro MUI_LANGUAGE "German"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_GERMAN} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_GERMAN} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_GERMAN} \
+#    "Zielverzeichnis auswählen (muss auf $\"vim$\" enden)"
+
+LangString str_show_readme          ${LANG_GERMAN} \
+    "README-Datei nach der Installation anzeigen"
+
+# Install types:
+LangString str_type_typical         ${LANG_GERMAN} \
+    "Typisch"
+
+LangString str_type_minimal         ${LANG_GERMAN} \
+    "Minimal"
+
+LangString str_type_full            ${LANG_GERMAN} \
+    "Vollständig"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_GERMAN} \
+    "Vorherige Version deinstallieren"
+LangString str_desc_old_ver         ${LANG_GERMAN} \
+    "Vorherige installierte Versionen auf diesem System deinstallieren."
+
+LangString str_section_exe          ${LANG_GERMAN} \
+    "Vim GUI"
+LangString str_desc_exe             ${LANG_GERMAN} \
+    "Vim (Anwendung) und Laufzeitdateien (Dieser Teil ist zwingend \
+     erforderlich)."
+
+LangString str_section_console      ${LANG_GERMAN} \
+    "Vim Konsolenanwendung"
+LangString str_desc_console         ${LANG_GERMAN} \
+    "Konsolenversion von Vim."
+
+LangString str_section_batch        ${LANG_GERMAN} \
+    ".bat-Dateien erstellen"
+LangString str_desc_batch           ${LANG_GERMAN} \
+    ".bat-Dateien erstellen, um Vim in der Konsole auszuführen."
+
+LangString str_group_icons          ${LANG_GERMAN} \
+    "Vim-Verknüpfungen erstellen"
+LangString str_desc_icons           ${LANG_GERMAN} \
+    "Verknüpfungen mit Vim für einfachen Aufruf erstellen."
+
+LangString str_section_desktop      ${LANG_GERMAN} \
+    "Auf dem Desktop"
+LangString str_desc_desktop         ${LANG_GERMAN} \
+    "Icons für GVim auf dem Desktop erstellen."
+
+LangString str_section_start_menu   ${LANG_GERMAN} \
+    "Im Startmenü"
+LangString str_desc_start_menu      ${LANG_GERMAN} \
+    "Vim im Programmverzeichnis des Startmenüs hinzufügen."
+
+#LangString str_section_quick_launch ${LANG_GERMAN} \
+#    "In der Schnellstartleiste"
+#LangString str_desc_quick_launch    ${LANG_GERMAN} \
+#    "Verknüpfung zu Vim in der Schnellstartleiste ablegen."
+
+LangString str_section_edit_with    ${LANG_GERMAN} \
+    "Vim zum Kontextmenü hinzufügen"
+LangString str_desc_edit_with       ${LANG_GERMAN} \
+    "Vim in das $\"Öffnen mit...$\"-Kontextmenü einfügen."
+
+#LangString str_section_edit_with32  ${LANG_GERMAN} \
+#    "32-Bit-Version"
+#LangString str_desc_edit_with32     ${LANG_GERMAN} \
+#    "Vim in das $\"Öffnen mit...$\"-Kontextmenü \
+#     für 32-Bit-Anwendungen integrieren."
+
+#LangString str_section_edit_with64  ${LANG_GERMAN} \
+#    "64-Bit-Version"
+#LangString str_desc_edit_with64     ${LANG_GERMAN} \
+#    "Vim in das $\"Öffnen mit...$\"-Kontextmenü \
+#     für 64-Bit-Anwendungen integrieren."
+
+LangString str_section_vim_rc       ${LANG_GERMAN} \
+    "Standard-Konfigurationsdatei erstellen"
+LangString str_desc_vim_rc          ${LANG_GERMAN} \
+    "Eine Standard-Konfigurationsdatei (_vimrc) erstellen, \
+     falls noch keine existiert."
+
+LangString str_group_plugin         ${LANG_GERMAN} \
+    "Plugin-Verzeichnisse anlegen"
+LangString str_desc_plugin          ${LANG_GERMAN} \
+    "Plugin-Verzeichnisse anlegen. Plugins erlauben es, Vim \
+     um zusätzliche Funktionen zu erweitern."
+
+LangString str_section_plugin_home  ${LANG_GERMAN} \
+    "Privat"
+LangString str_desc_plugin_home     ${LANG_GERMAN} \
+    "Erstelle Plugin-Verzeichnis im HOME Benutzerverzeichnis."
+
+LangString str_section_plugin_vim   ${LANG_GERMAN} \
+    "Freigegeben"
+LangString str_desc_plugin_vim      ${LANG_GERMAN} \
+    "Plugin-Verzeichnisse im Vim-Installationsverzeichnis erstellen. Diese werden \
+     für alle Benutzer dieses Systems genutzt."
+
+LangString str_section_vis_vim      ${LANG_GERMAN} \
+    "VisVim-Erweiterung"
+LangString str_desc_vis_vim         ${LANG_GERMAN} \
+    "VisVim-Erweiterung zur Integration in Microsoft Visual Studio."
+
+LangString str_section_nls          ${LANG_GERMAN} \
+    "Unterstützung für andere Sprachen"
+LangString str_desc_nls             ${LANG_GERMAN} \
+    "Dateien zur Unterstützung anderer Sprachen als Englisch installieren."
+
+LangString str_unsection_register   ${LANG_GERMAN} \
+    "Vim deinstallieren"
+LangString str_desc_unregister      ${LANG_GERMAN} \
+    "Vim vom System entfernen."
+
+LangString str_unsection_exe        ${LANG_GERMAN} \
+    "Vim-Anwendung und Laufzeitdateien entfernen"
+LangString str_desc_rm_exe          ${LANG_GERMAN} \
+    "Alle Vim-Anwendungen und Laufzeitdateien von diesem System entfernen."
+
+LangString str_ungroup_plugin       ${LANG_GERMAN} \
+    "Entferne Plugin-Verzeichnisse"
+LangString str_desc_rm_plugin       ${LANG_GERMAN} \
+    "Entferne Plugin-Verzeichnisse, falls sie leer sind."
+
+LangString str_unsection_plugin_home ${LANG_GERMAN} \
+    "Privat"
+LangString str_desc_rm_plugin_home  ${LANG_GERMAN} \
+    "Entfernt die Plugin-Verzeichnisse aus dem HOME Benutzerverzeichnis."
+
+LangString str_unsection_plugin_vim ${LANG_GERMAN} \
+    "Freigegeben"
+LangString str_desc_rm_plugin_vim   ${LANG_GERMAN} \
+    "Entfernt das Plugin-Verzeichnis aus dem Vim-Installationsverzeichnis."
+
+LangString str_unsection_rootdir    ${LANG_GERMAN} \
+    "Entferne Vim Installationsverzeichnis"
+LangString str_desc_rm_rootdir      ${LANG_GERMAN} \
+    "Entfernt das Vim Installationsverzeichnis. Es enthält die Vim Konfigurationsdateien!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_GERMAN} \
+#    "$vim_old_ver_count Vim-Versionen auf diesem System gefunden..$\r$\n\
+#     Dieser Installer kann maximal ${VIM_MAX_OLD_VER} Versionen \
+#     handhaben.$\r$\n\
+#     Bitte alte Versionen entfernen und noch einmal probieren."
+
+#LangString str_msg_invalid_root  ${LANG_GERMAN} \
+#    "Nicht gültiges Installationsverzeichnis: $vim_install_root!$\r$\n\
+#     Der Pfad muss auf $\"vim$\" enden."
+
+#LangString str_msg_bin_mismatch  ${LANG_GERMAN} \
+#    "Pfaddiskrepanz!$\r$\n$\r$\n\
+#     Erwarte Anwendungsverzeichnis $\"$vim_bin_path$\",$\r$\n\
+#     aber fand Anwendungspfad $\"$INSTDIR$\" vor."
+
+#LangString str_msg_vim_running   ${LANG_GERMAN} \
+#    "Laufender Vim-Prozess erkannt.$\r$\n\
+#     Bitte alle laufenden Vim-Prozesse vor dem Fortfahren beenden."
+
+#LangString str_msg_register_ole  ${LANG_GERMAN} \
+#    "Versuche OLE-Registrierung durchzuführen."
+
+#LangString str_msg_unreg_ole     ${LANG_GERMAN} \
+#    "Versuche OLE-Registrierung zu löschen."
+
+#LangString str_msg_rm_start      ${LANG_GERMAN} \
+#    "Deinstalliere die folgende Version:"
+
+#LangString str_msg_rm_fail       ${LANG_GERMAN} \
+#    "Deinstallation der Version fehlgeschlagen:"
+
+#LangString str_msg_no_rm_key     ${LANG_GERMAN} \
+#    "Deinstallationsschlüssel in der Registrierungsdatenbank nicht gefunden."
+
+#LangString str_msg_no_rm_reg     ${LANG_GERMAN} \
+#    "Kein Uninstaller in der Registrierungsdatenbank gefunden."
+
+#LangString str_msg_no_rm_exe     ${LANG_GERMAN} \
+#    "Kein Zugriff auf den Uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_GERMAN} \
+#    "Fehler beim Kopieren des Uninstallers in ein temporäres Verzeichnis."
+
+#LangString str_msg_rm_run_fail   ${LANG_GERMAN} \
+#    "Fehler beim Aufruf des Uninstallers."
+
+#LangString str_msg_abort_install ${LANG_GERMAN} \
+#    "Installation wird abgebrochen."
+
+LangString str_msg_install_fail  ${LANG_GERMAN} \
+    "Installation fehlerhaft beendet."
+
+LangString str_msg_rm_exe_fail   ${LANG_GERMAN} \
+    "Einige Dateien im Pfad $0 konnten nicht gelöscht werden!$\r$\n\
+     Diese Dateien müssen manuell gelöscht werden."
+
+#LangString str_msg_rm_root_fail  ${LANG_GERMAN} \
+#    "Achtung: Kann Verzeichnis $\"$vim_install_root$\" nicht entfernen, \
+#     weil es nicht leer ist!"
+
+LangString str_msg_uninstalling  ${LANG_GERMAN} \
+    "Deinstalliere alte Version..."
+
+LangString str_msg_registering   ${LANG_GERMAN} \
+    "Registriere..."
+
+LangString str_msg_unregistering ${LANG_GERMAN} \
+    "Entferne Registrierung..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_GERMAN} \
+    "Wähle _vimrc Konfigurationsoptionen"
+LangString str_vimrc_page_subtitle ${LANG_GERMAN} \
+    "Wähle Einstellungen zur Kompatibilität, Tastatur und Maus."
+
+LangString str_msg_compat_title    ${LANG_GERMAN} \
+    " Vi / Vim Verhalten "
+LangString str_msg_compat_desc     ${LANG_GERMAN} \
+    "&Kompatibilität und Erweiterungen"
+LangString str_msg_compat_vi       ${LANG_GERMAN} \
+    "Vi-kompatibel"
+LangString str_msg_compat_vim      ${LANG_GERMAN} \
+    "Vim Original"
+LangString str_msg_compat_defaults ${LANG_GERMAN} \
+    "Vim mit einigen Erweiterungen (Lädt defaults.vim)"
+LangString str_msg_compat_all      ${LANG_GERMAN} \
+    "Vim mit allen Erweiterungen (Lädt vimrc_example.vim) (Standard)"
+
+LangString str_msg_keymap_title   ${LANG_GERMAN} \
+    " Mappings für Windows Standard Tastenkombinationen "
+LangString str_msg_keymap_desc    ${LANG_GERMAN} \
+    "&Einige Tasten umkonfigurieren (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_GERMAN} \
+    "Keine Tasten umkonfigurieren (Standard)"
+LangString str_msg_keymap_windows ${LANG_GERMAN} \
+    "Einige Tasten umkonfigurieren"
+
+LangString str_msg_mouse_title   ${LANG_GERMAN} \
+    " Maus "
+LangString str_msg_mouse_desc    ${LANG_GERMAN} \
+    "&Verhalten der linken und rechten Buttons"
+LangString str_msg_mouse_default ${LANG_GERMAN} \
+    "Rechts: Popup Menü, Links: Visueller Modus (Standard)"
+LangString str_msg_mouse_windows ${LANG_GERMAN} \
+    "Rechts: Popup Menü, Links: Auswahl Modus (Windows)"
+LangString str_msg_mouse_unix    ${LANG_GERMAN} \
+    "Rechts: Auswahl erweitern, Links: Visueller Modus (Unix)"

nsis/lang/italian.nsi

@@ -0,0 +1,283 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# italian.nsi : Italian language strings for gvim NSIS installer.
+#
+# Locale ID    : 1040
+# Locale Name  : it
+# fileencoding : UTF-8
+# Author       : Antonio Colombo
+
+!insertmacro MUI_LANGUAGE "Italian"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_ITALIAN} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_ITALIAN} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_ITALIAN} \
+#    "Cartella d'installazione (il nome deve finire con $\"vim$\")"
+
+LangString str_show_readme          ${LANG_ITALIAN} \
+    "Visualizza README al termine dell'installazione"
+
+# Install types:
+LangString str_type_typical         ${LANG_ITALIAN} \
+    "Tipica"
+
+LangString str_type_minimal         ${LANG_ITALIAN} \
+    "Minima"
+
+LangString str_type_full            ${LANG_ITALIAN} \
+    "Completa"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_ITALIAN} \
+    "Disinstalla versione/i esistente/i"
+LangString str_desc_old_ver         ${LANG_ITALIAN} \
+    "Disinstalla versione/i esistente/i di Vim dal vostro sistema."
+
+LangString str_section_exe          ${LANG_ITALIAN} \
+    "Vim GUI e file di supporto"
+LangString str_desc_exe             ${LANG_ITALIAN} \
+    "Vim GUI programmi e file di supporto.  Questa componente è indispensabile."
+
+LangString str_section_console      ${LANG_ITALIAN} \
+    "Vim console (vim.exe per MS-DOS)"
+LangString str_desc_console         ${LANG_ITALIAN} \
+    "Versione console di Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_ITALIAN} \
+    "Crea file di invocazione (MS-DOS) .bat"
+LangString str_desc_batch           ${LANG_ITALIAN} \
+    "Crea file di invocazione .bat per varianti di Vim nella directory \
+     di Windows, per utilizzo da linea di comando (MS-DOS)."
+
+LangString str_group_icons          ${LANG_ITALIAN} \
+    "Crea icone per Vim"
+LangString str_desc_icons           ${LANG_ITALIAN} \
+    "Crea icone per Vim in vari posti, per rendere facile l'accesso."
+
+LangString str_section_desktop      ${LANG_ITALIAN} \
+    "Sul Desktop"
+LangString str_desc_desktop         ${LANG_ITALIAN} \
+    "Crea icone per programma gVim sul desktop."
+
+LangString str_section_start_menu   ${LANG_ITALIAN} \
+    "Nella cartella del menù START"
+LangString str_desc_start_menu      ${LANG_ITALIAN} \
+    "Aggiungi Vim alle cartelle del menù START."
+
+#LangString str_section_quick_launch ${LANG_ITALIAN} \
+#    "Nella barra di Avvio Veloce"
+#LangString str_desc_quick_launch    ${LANG_ITALIAN} \
+#    "Aggiungi un puntatore a Vim nella barra di Avvio Veloce."
+
+LangString str_section_edit_with    ${LANG_ITALIAN} \
+    "Aggiungi Vim al Menù Contestuale"
+LangString str_desc_edit_with       ${LANG_ITALIAN} \
+    "Aggiungi Vim alla lista contestuale $\"Apri con...$\"."
+
+#LangString str_section_edit_with32  ${LANG_ITALIAN} \
+#    "Versione a 32-bit"
+#LangString str_desc_edit_with32     ${LANG_ITALIAN} \
+#    "Aggiungi Vim alla lista contestuale $\"Apri con...$\" \
+#     per applicazioni a 32-bit."
+
+#LangString str_section_edit_with64  ${LANG_ITALIAN} \
+#    "Versione a 64-bit"
+#LangString str_desc_edit_with64     ${LANG_ITALIAN} \
+#    "Aggiungi Vim alla lista contestuale $\"Apri con...$\" \
+#     per applicazioni a 64-bit."
+
+LangString str_section_vim_rc       ${LANG_ITALIAN} \
+    "Crea configurazione di default"
+LangString str_desc_vim_rc          ${LANG_ITALIAN} \
+    "Crea un file configurazione di default (_vimrc) se non \
+     ne esiste già uno."
+
+LangString str_group_plugin         ${LANG_ITALIAN} \
+    "Crea directory per plugin"
+LangString str_desc_plugin          ${LANG_ITALIAN} \
+    "Crea directory per plugin.  Consentono di aggiungere funzionalità \
+     a Vim mettendo file in una di queste directory."
+
+LangString str_section_plugin_home  ${LANG_ITALIAN} \
+    "Private"
+LangString str_desc_plugin_home     ${LANG_ITALIAN} \
+    "Crea directory per plugin nella directory HOME."
+
+LangString str_section_plugin_vim   ${LANG_ITALIAN} \
+    "Condivise"
+LangString str_desc_plugin_vim      ${LANG_ITALIAN} \
+    "Crea directory per plugin nella directory di installazione di Vim \
+     per uso da parte di tutti gli utenti di questo sistema."
+
+LangString str_section_vis_vim      ${LANG_ITALIAN} \
+    "Estensione VisVim"
+LangString str_desc_vis_vim         ${LANG_ITALIAN} \
+    "Estensione VisVim per integrazione con Microsoft Visual Studio."
+
+LangString str_section_nls          ${LANG_ITALIAN} \
+    "Supporto Multilingue (NLS)"
+LangString str_desc_nls             ${LANG_ITALIAN} \
+    "Installa file per supportare messaggi in diverse lingue."
+
+LangString str_unsection_register   ${LANG_ITALIAN} \
+    "Togli Vim dal Registry"
+LangString str_desc_unregister      ${LANG_ITALIAN} \
+    "Togli Vim dal Registry di configurazione sistema."
+
+LangString str_unsection_exe        ${LANG_ITALIAN} \
+    "Cancella programmi/file di supporto Vim"
+LangString str_desc_rm_exe          ${LANG_ITALIAN} \
+    "Cancella tutti i programmi/file di supporto di Vim."
+
+LangString str_ungroup_plugin       ${LANG_ITALIAN} \
+    "Cancella le directory per plugin"
+LangString str_desc_rm_plugin       ${LANG_ITALIAN} \
+    "Cancella le directory per plugin se sono vuote."
+
+LangString str_unsection_plugin_home ${LANG_ITALIAN} \
+    "Private"
+LangString str_desc_rm_plugin_home  ${LANG_ITALIAN} \
+    "Cancella le directory per plugin dalla directory HOME."
+
+LangString str_unsection_plugin_vim ${LANG_ITALIAN} \
+    "Condivise"
+LangString str_desc_rm_plugin_vim   ${LANG_ITALIAN} \
+    "Cancella le directory per plugin dalla directory di installazione di Vim."
+
+LangString str_unsection_rootdir    ${LANG_ITALIAN} \
+    "Cancella la directory di installazione di Vim"
+LangString str_desc_rm_rootdir      ${LANG_ITALIAN} \
+    "Cancella la directory di installazione di Vim. Contiene i vostri file di configurazione!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_ITALIAN} \
+#    "Trovate $vim_old_ver_count versioni di Vim sul vostro sistema.$\r$\n\
+#     Questo programma di installazione può gestire solo \
+#     ${VIM_MAX_OLD_VER} versioni.$\r$\n\
+#     Disinstallate qualche versione precedente e ricominciate."
+
+#LangString str_msg_invalid_root  ${LANG_ITALIAN} \
+#    "Nome di directory di installazione non valida: $vim_install_root!$\r$\n\
+#     Dovrebbe terminare con $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_ITALIAN} \
+#    "Conflitto nella directory di installazione!$\r$\n$\r$\n\
+#     Cartella di installazione dev'essere $\"$vim_bin_path$\",$\r$\n\
+#     ma il sistema segnala invece $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_ITALIAN} \
+#    "Vim ancora in esecuzione sul vostro sistema.$\r$\n\
+#     Chiudete tutte le sessioni attive di Vim per continuare."
+
+#LangString str_msg_register_ole  ${LANG_ITALIAN} \
+#    "Tentativo di registrazione di Vim con OLE. \
+#     Non c'è messaggio che indica se è riuscito o no."
+
+#LangString str_msg_unreg_ole     ${LANG_ITALIAN} \
+#    "Tentativo di togliere dal Registry Vim con OLE. \
+#     Non c'è messaggio che indica se è riuscito o no."
+
+#LangString str_msg_rm_start      ${LANG_ITALIAN} \
+#    "Disinstallazione della seguente versione:"
+
+#LangString str_msg_rm_fail       ${LANG_ITALIAN} \
+#    "Disinstallazione non riuscita per la seguente versione:"
+
+#LangString str_msg_no_rm_key     ${LANG_ITALIAN} \
+#    "Non riesco a trovare chiave di disinstallazione nel Registry."
+
+#LangString str_msg_no_rm_reg     ${LANG_ITALIAN} \
+#    "Non riesco a trovare programma disinstallazione nel Registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_ITALIAN} \
+#    "Non riesco a trovare programma disinstallazione."
+
+#LangString str_msg_rm_copy_fail  ${LANG_ITALIAN} \
+#    "Non riesco a copiare programma disinstallazione a una \
+#     directory temporanea."
+
+#LangString str_msg_rm_run_fail   ${LANG_ITALIAN} \
+#    "Non riesco a eseguire programma disinstallazione."
+
+#LangString str_msg_abort_install ${LANG_ITALIAN} \
+#    "Il programma di disinstallazione verrà chiuso senza aver fatto nulla."
+
+LangString str_msg_install_fail  ${LANG_ITALIAN} \
+    "Installazione non riuscita. Miglior fortuna alla prossima!"
+
+LangString str_msg_rm_exe_fail   ${LANG_ITALIAN} \
+    "Alcuni file in $0 non sono stati cancellati!$\r$\n\
+     Dovreste cancellarli voi stessi."
+
+#LangString str_msg_rm_root_fail  ${LANG_ITALIAN} \
+#    "AVVISO: Non posso cancellare $\"$vim_install_root$\", non è vuota!"
+
+LangString str_msg_uninstalling  ${LANG_ITALIAN} \
+    "Sto disinstallando la vecchia versione..."
+
+LangString str_msg_registering   ${LANG_ITALIAN} \
+    "Sto aggiungendo Vim al Registry..."
+
+LangString str_msg_unregistering ${LANG_ITALIAN} \
+    "Sto togliendo Vim dal Registry..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_ITALIAN} \
+    "Scelta impostazioni _vimrc"
+LangString str_vimrc_page_subtitle ${LANG_ITALIAN} \
+    "Scelta impostazioni per funzionalità ulteriori, tastiera e mouse."
+
+LangString str_msg_compat_title    ${LANG_ITALIAN} \
+    " comportamento come Vi / Vim "
+LangString str_msg_compat_desc     ${LANG_ITALIAN} \
+    "&Compatibilità e funzionalità ulteriori"
+LangString str_msg_compat_vi       ${LANG_ITALIAN} \
+    "Compatibile con Vi"
+LangString str_msg_compat_vim      ${LANG_ITALIAN} \
+    "Vim originale"
+LangString str_msg_compat_defaults ${LANG_ITALIAN} \
+    "Vim con alcune funzionalità ulteriori (esecuzione defaults.vim)"
+LangString str_msg_compat_all      ${LANG_ITALIAN} \
+    "Vim con tutte le funzionalità ulteriori (esecuzione vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_ITALIAN} \
+    " Mappature "
+LangString str_msg_keymap_desc    ${LANG_ITALIAN} \
+    "&Rimappatura di alcuni tasti per Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc.)"
+LangString str_msg_keymap_default ${LANG_ITALIAN} \
+    "Non effettuare rimappature di tasti (Default)"
+LangString str_msg_keymap_windows ${LANG_ITALIAN} \
+    "Rimappare solo alcuni tasti"
+
+LangString str_msg_mouse_title   ${LANG_ITALIAN} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_ITALIAN} \
+    "&Comportamento dei pulsanti destro e sinistro"
+LangString str_msg_mouse_default ${LANG_ITALIAN} \
+    "Destro: popup menu, Sinistro: modalità visuale (Default)"
+LangString str_msg_mouse_windows ${LANG_ITALIAN} \
+    "Destro: popup menu, Sinistro: seleziona modalità (Windows)"
+LangString str_msg_mouse_unix    ${LANG_ITALIAN} \
+    "Destro: estende selezione, Sinistro: modalità visuale (Unix)"

nsis/lang/japanese.nsi

@@ -0,0 +1,287 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# japanese.nsi: Japanese language strings for gvim NSIS installer.
+#
+# Locale ID    : 1041
+# fileencoding : UTF-8
+# Author       : Ken Takata
+
+!insertmacro MUI_LANGUAGE "Japanese"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_JAPANESE} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_JAPANESE} \
+        "$(^Name) Uninstall"
+
+# Workarounds for NSIS Japanese translation. The messages are too long.
+# These should be better to be fixed by the NSIS upstream.
+LangString ^SpaceAvailable   ${LANG_JAPANESE} \
+        "利用可能なディスク容量："
+LangString ^SpaceRequired    ${LANG_JAPANESE} \
+        "必要なディスク容量："
+# Fix another NSIS Japanese translation. The access key was missing.
+LangString ^InstallBtn       ${LANG_JAPANESE} \
+        "インストール(&I)"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_JAPANESE} \
+#    "Destination Folder (Must end with $\"vim$\")"
+
+LangString str_show_readme          ${LANG_JAPANESE} \
+    "インストール完了後に README を表示する"
+
+# Install types:
+LangString str_type_typical         ${LANG_JAPANESE} \
+    "通常"
+
+LangString str_type_minimal         ${LANG_JAPANESE} \
+    "最小"
+
+LangString str_type_full            ${LANG_JAPANESE} \
+    "全て"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_JAPANESE} \
+    "既存のバージョンをアンインストール"
+LangString str_desc_old_ver         ${LANG_JAPANESE} \
+    "すでにインストールされている Vim をシステムから削除します。"
+
+LangString str_section_exe          ${LANG_JAPANESE} \
+    "Vim GUI とランタイムファイル"
+LangString str_desc_exe             ${LANG_JAPANESE} \
+    "Vim GUI 実行ファイルとラインタイムファイル。このコンポーネントは必須です。"
+
+LangString str_section_console      ${LANG_JAPANESE} \
+    "Vim コンソールプログラム"
+LangString str_desc_console         ${LANG_JAPANESE} \
+    "コンソール版の Vim (vim.exe)。"
+
+LangString str_section_batch        ${LANG_JAPANESE} \
+    ".bat ファイルを作成"
+LangString str_desc_batch           ${LANG_JAPANESE} \
+    "コマンドラインから Vim と関連コマンドを実行できるように、.bat ファイルを Windows ディレクトリに作成します。"
+
+LangString str_group_icons          ${LANG_JAPANESE} \
+    "Vim のアイコンを作成"
+LangString str_desc_icons           ${LANG_JAPANESE} \
+    "Vim を簡単に実行できるように、いくつかの場所にアイコンを作成します。"
+
+LangString str_section_desktop      ${LANG_JAPANESE} \
+    "デスクトップ上"
+LangString str_desc_desktop         ${LANG_JAPANESE} \
+    "gVim 実行ファイルのアイコンをデスクトップ上に作成します。"
+
+LangString str_section_start_menu   ${LANG_JAPANESE} \
+    "スタートメニューのプログラムフォルダー上"
+LangString str_desc_start_menu      ${LANG_JAPANESE} \
+    "Vim のアイコンをスタートメニューのプログラムフォルダー上に作成します。"
+
+#LangString str_section_quick_launch ${LANG_JAPANESE} \
+#    "In the Quick Launch Bar"
+#LangString str_desc_quick_launch    ${LANG_JAPANESE} \
+#    "Add Vim shortcut in the quick launch bar."
+
+LangString str_section_edit_with    ${LANG_JAPANESE} \
+    "Vim のコンテキストメニューを追加"
+LangString str_desc_edit_with       ${LANG_JAPANESE} \
+    "$\"Vimで編集する$\" をコンテキストメニューに追加します。"
+
+#LangString str_section_edit_with32  ${LANG_JAPANESE} \
+#    "32-bit Version"
+#LangString str_desc_edit_with32     ${LANG_JAPANESE} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 32-bit applications."
+
+#LangString str_section_edit_with64  ${LANG_JAPANESE} \
+#    "64-bit Version"
+#LangString str_desc_edit_with64     ${LANG_JAPANESE} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 64-bit applications."
+
+LangString str_section_vim_rc       ${LANG_JAPANESE} \
+    "既定のコンフィグを作成"
+LangString str_desc_vim_rc          ${LANG_JAPANESE} \
+    "もし無ければ、既定のコンフィグファイル (_vimrc) を作成します。"
+
+LangString str_group_plugin         ${LANG_JAPANESE} \
+    "プラグインディレクトリを作成"
+LangString str_desc_plugin          ${LANG_JAPANESE} \
+    "プラグインディレクトリを作成します。そこにプラグインファイルを置くことで Vim を拡張することができます。"
+
+LangString str_section_plugin_home  ${LANG_JAPANESE} \
+    "個人用"
+LangString str_desc_plugin_home     ${LANG_JAPANESE} \
+    "プラグインディレクトリをホームディレクトリに作成します。"
+
+LangString str_section_plugin_vim   ${LANG_JAPANESE} \
+    "共用"
+LangString str_desc_plugin_vim      ${LANG_JAPANESE} \
+    "プラグインディレクトリを Vim のインストールディレクトリに作成します。システムの全員で共有されます。"
+
+LangString str_section_vis_vim      ${LANG_JAPANESE} \
+    "VisVim 拡張"
+LangString str_desc_vis_vim         ${LANG_JAPANESE} \
+    "Microsoft Visual Studio 統合用の VisVim 拡張。"
+
+LangString str_section_nls          ${LANG_JAPANESE} \
+    "多言語サポート"
+LangString str_desc_nls             ${LANG_JAPANESE} \
+    "多言語サポート用のファイルをインストールします。"
+
+LangString str_unsection_register   ${LANG_JAPANESE} \
+    "Vim を登録解除"
+LangString str_desc_unregister      ${LANG_JAPANESE} \
+    "Vim をシステムから登録解除します。"
+
+LangString str_unsection_exe        ${LANG_JAPANESE} \
+    "Vim の実行ファイル/ランタイムファイルを削除"
+LangString str_desc_rm_exe          ${LANG_JAPANESE} \
+    "全ての Vim の実行ファイルとランタイムファイルを削除します。"
+
+LangString str_ungroup_plugin       ${LANG_JAPANESE} \
+    "プラグインディレクトリを削除"
+LangString str_desc_rm_plugin       ${LANG_JAPANESE} \
+    "プラグインディレクトリが空であればそれを削除します。"
+
+LangString str_unsection_plugin_home ${LANG_JAPANESE} \
+    "個人用"
+LangString str_desc_rm_plugin_home  ${LANG_JAPANESE} \
+    "プラグインディレクトリをホームディレクトリから削除します。"
+
+LangString str_unsection_plugin_vim ${LANG_JAPANESE} \
+    "共用"
+LangString str_desc_rm_plugin_vim   ${LANG_JAPANESE} \
+    "プラグインディレクトリを Vim のインストールディレクトリから削除します。"
+
+LangString str_unsection_rootdir    ${LANG_JAPANESE} \
+    "Vim のトップディレクトリを削除"
+LangString str_desc_rm_rootdir      ${LANG_JAPANESE} \
+    "Vim のトップディレクトリを削除します。あなたの Vim の設定ファイルも含まれていることに注意してください！"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_JAPANESE} \
+#    "Found $vim_old_ver_count Vim versions on your system.$\r$\n\
+#     This installer can only handle ${VIM_MAX_OLD_VER} versions \
+#     at most.$\r$\n\
+#     Please remove some versions and start again."
+
+#LangString str_msg_invalid_root  ${LANG_JAPANESE} \
+#    "Invalid install path: $vim_install_root!$\r$\n\
+#     It should end with $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_JAPANESE} \
+#    "Binary path mismatch!$\r$\n$\r$\n\
+#     Expect the binary path to be $\"$vim_bin_path$\",$\r$\n\
+#     but system indicates the binary path is $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_JAPANESE} \
+#    "Vim is still running on your system.$\r$\n\
+#     Please close all instances of Vim before you continue."
+
+#LangString str_msg_register_ole  ${LANG_JAPANESE} \
+#    "Attempting to register Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_unreg_ole     ${LANG_JAPANESE} \
+#    "Attempting to unregister Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_rm_start      ${LANG_JAPANESE} \
+#    "Uninstalling the following version:"
+
+#LangString str_msg_rm_fail       ${LANG_JAPANESE} \
+#    "Fail to uninstall the following version:"
+
+#LangString str_msg_no_rm_key     ${LANG_JAPANESE} \
+#    "Cannot find uninstaller registry key."
+
+#LangString str_msg_no_rm_reg     ${LANG_JAPANESE} \
+#    "Cannot find uninstaller from registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_JAPANESE} \
+#    "Cannot access uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_JAPANESE} \
+#    "Fail to copy uninstaller to temporary directory."
+
+#LangString str_msg_rm_run_fail   ${LANG_JAPANESE} \
+#    "Fail to run uninstaller."
+
+#LangString str_msg_abort_install ${LANG_JAPANESE} \
+#    "Installer will abort."
+
+LangString str_msg_install_fail  ${LANG_JAPANESE} \
+    "インストールに失敗しました。次はうまくいくことを祈ります。"
+
+LangString str_msg_rm_exe_fail   ${LANG_JAPANESE} \
+    "$0 内の一部のファイルは削除できませんでした!$\r$\n\
+     手動で削除する必要があります。"
+
+#LangString str_msg_rm_root_fail  ${LANG_JAPANESE} \
+#    "WARNING: Cannot remove $\"$vim_install_root$\", it is not empty!"
+
+LangString str_msg_uninstalling  ${LANG_JAPANESE} \
+    "古いバージョンをアンインストールしています..."
+
+LangString str_msg_registering   ${LANG_JAPANESE} \
+    "登録中..."
+
+LangString str_msg_unregistering ${LANG_JAPANESE} \
+    "登録解除中..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_JAPANESE} \
+    "_vimrc の設定を選んでください"
+LangString str_vimrc_page_subtitle ${LANG_JAPANESE} \
+    "拡張やキーボード、マウスの設定を選んでください。"
+
+LangString str_msg_compat_title    ${LANG_JAPANESE} \
+    " Vi / Vim の動作 "
+LangString str_msg_compat_desc     ${LANG_JAPANESE} \
+    "互換性と拡張(&C)"
+LangString str_msg_compat_vi       ${LANG_JAPANESE} \
+    "Vi 互換"
+LangString str_msg_compat_vim      ${LANG_JAPANESE} \
+    "Vim 独自"
+LangString str_msg_compat_defaults ${LANG_JAPANESE} \
+    "Vim 独自と多少の拡張 (defaults.vim を読み込み)"
+LangString str_msg_compat_all      ${LANG_JAPANESE} \
+    "Vim 独自と全ての拡張 (vimrc_example.vim を読み込み) (既定)"
+
+LangString str_msg_keymap_title   ${LANG_JAPANESE} \
+    " マッピング "
+LangString str_msg_keymap_desc    ${LANG_JAPANESE} \
+    "Windows用に一部のキーをリマップする(&R) (例: Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F など)"
+LangString str_msg_keymap_default ${LANG_JAPANESE} \
+    "リマップしない (既定)"
+LangString str_msg_keymap_windows ${LANG_JAPANESE} \
+    "リマップする"
+
+LangString str_msg_mouse_title   ${LANG_JAPANESE} \
+    " マウス "
+LangString str_msg_mouse_desc    ${LANG_JAPANESE} \
+    "右ボタンと左ボタンの動作(&B)"
+LangString str_msg_mouse_default ${LANG_JAPANESE} \
+    "右：ポップアップメニュー、左：ビジュアルモード (既定)"
+LangString str_msg_mouse_windows ${LANG_JAPANESE} \
+    "右：ポップアップメニュー、左：選択モード (Windows)"
+LangString str_msg_mouse_unix    ${LANG_JAPANESE} \
+    "右：選択を拡張、左：ビジュアルモード (Unix)"

nsis/lang/simpchinese.nsi

@@ -0,0 +1,277 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# simpchinese.nsi: Simplified Chinese language strings for gvim NSIS
+# installer.
+#
+# Locale ID    : 2052
+# fileencoding : UTF-8
+# Author       : Guopeng Wen
+
+!insertmacro MUI_LANGUAGE "SimpChinese"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_SIMPCHINESE} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_SIMPCHINESE} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_SIMPCHINESE} \
+#    "安装路径 (必须以 vim 结尾)"
+
+LangString str_show_readme          ${LANG_SIMPCHINESE} \
+    "安装完成后显示 README 文件"
+
+# Install types:
+LangString str_type_typical         ${LANG_SIMPCHINESE} \
+    "典型安装"
+
+LangString str_type_minimal         ${LANG_SIMPCHINESE} \
+    "最小安装"
+
+LangString str_type_full            ${LANG_SIMPCHINESE} \
+    "完全安装"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_SIMPCHINESE} \
+    "卸载旧版本"
+LangString str_desc_old_ver         ${LANG_SIMPCHINESE} \
+    "卸载系统上旧版本的 Vim。"
+
+LangString str_section_exe          ${LANG_SIMPCHINESE} \
+    "安装 Vim 图形界面"
+LangString str_desc_exe             ${LANG_SIMPCHINESE} \
+    "安装 Vim 图形界面及脚本。此为必选安装。"
+
+LangString str_section_console      ${LANG_SIMPCHINESE} \
+    "安装 Vim 命令行程序"
+LangString str_desc_console         ${LANG_SIMPCHINESE} \
+    "安装 Vim 命令行程序 (vim.exe)。该程序在命令行窗口中运行。"
+
+LangString str_section_batch        ${LANG_SIMPCHINESE} \
+    "安装批处理文件"
+LangString str_desc_batch           ${LANG_SIMPCHINESE} \
+    "为 Vim 的各种变体创建批处理程序，以便在命令行下运行 Vim。"
+
+LangString str_group_icons          ${LANG_SIMPCHINESE} \
+    "创建 Vim 图标"
+LangString str_desc_icons           ${LANG_SIMPCHINESE} \
+    "为 Vim 创建若干图标，以方便使用 Vim。"
+
+LangString str_section_desktop      ${LANG_SIMPCHINESE} \
+    "在桌面上"
+LangString str_desc_desktop         ${LANG_SIMPCHINESE} \
+    "在桌面上为 Vim 创建若干图标，以方便启动 Vim。"
+
+LangString str_section_start_menu   ${LANG_SIMPCHINESE} \
+    "在启动菜单的程序菜单下"
+LangString str_desc_start_menu      ${LANG_SIMPCHINESE} \
+    "在启动菜单的程序菜单下添加 Vim 组。适用于 Windows 95 及以上版本。"
+
+#LangString str_section_quick_launch ${LANG_SIMPCHINESE} \
+#    "在快速启动启动栏中"
+#LangString str_desc_quick_launch    ${LANG_SIMPCHINESE} \
+#    "在快速启动栏中添加 Vim 图标。"
+
+LangString str_section_edit_with    ${LANG_SIMPCHINESE} \
+    "安装快捷菜单"
+LangString str_desc_edit_with       ${LANG_SIMPCHINESE} \
+    "将 Vim 添加到“打开方式”快捷菜单中。"
+
+#LangString str_section_edit_with32  ${LANG_SIMPCHINESE} \
+#    "32 位版本"
+#LangString str_desc_edit_with32     ${LANG_SIMPCHINESE} \
+#    "将 Vim 添加到 32 位程序的“打开方式”快捷菜单中。"
+
+#LangString str_section_edit_with64  ${LANG_SIMPCHINESE} \
+#    "64 位版本"
+#LangString str_desc_edit_with64     ${LANG_SIMPCHINESE} \
+#    "将 Vim 添加到 64 位程序的“打开方式”快捷菜单中。"
+
+LangString str_section_vim_rc       ${LANG_SIMPCHINESE} \
+    "创建缺省配置文件"
+LangString str_desc_vim_rc          ${LANG_SIMPCHINESE} \
+    "在安装目录下生成缺省的 Vim 配置文件(_vimrc)。\
+     如果该文件已经存在，则略过此项。"
+
+LangString str_group_plugin         ${LANG_SIMPCHINESE} \
+    "创建插件目录"
+LangString str_desc_plugin          ${LANG_SIMPCHINESE} \
+    "创建(空的)插件目录结构。插件目录用于安装 Vim 扩展插件，\
+     只要将文件复制到相关的子目录中即可。"
+
+LangString str_section_plugin_home  ${LANG_SIMPCHINESE} \
+    "私有插件目录"
+LangString str_desc_plugin_home     ${LANG_SIMPCHINESE} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_SIMPCHINESE} \
+    "公共插件目录"
+LangString str_desc_plugin_vim      ${LANG_SIMPCHINESE} \
+    "在 Vim 安装目录下创建(空的)插件目录结构，系统上所有用户都能使用安装在\
+     该目录下的扩展插件。"
+
+LangString str_section_vis_vim      ${LANG_SIMPCHINESE} \
+    "安装 VisVim 插件"
+LangString str_desc_vis_vim         ${LANG_SIMPCHINESE} \
+    "安装用于与微软 Microsoft Visual Studio 进行集成的 VisVim 插件。"
+
+LangString str_section_nls          ${LANG_SIMPCHINESE} \
+    "安装多语言支持"
+LangString str_desc_nls             ${LANG_SIMPCHINESE} \
+    "安装用于多语言支持的文件。"
+
+LangString str_unsection_register   ${LANG_SIMPCHINESE} \
+    "删除 Vim 系统配置"
+LangString str_desc_unregister      ${LANG_SIMPCHINESE} \
+    "删除和 Vim 相关的系统配置。"
+
+LangString str_unsection_exe        ${LANG_SIMPCHINESE} \
+    "删除 Vim 执行文件以及脚本"
+LangString str_desc_rm_exe          ${LANG_SIMPCHINESE} \
+    "删除 Vim 的所有执行文件及脚本。"
+
+LangString str_ungroup_plugin       ${LANG_SIMPCHINESE} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_SIMPCHINESE} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_SIMPCHINESE} \
+    "私有插件目录"
+LangString str_desc_rm_plugin_home  ${LANG_SIMPCHINESE} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_SIMPCHINESE} \
+    "公共插件目录"
+LangString str_desc_rm_plugin_vim   ${LANG_SIMPCHINESE} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_SIMPCHINESE} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_SIMPCHINESE} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_SIMPCHINESE} \
+#    "您的系统上安装了 $vim_old_ver_count 个不同版本的 Vim，$\r$\n\
+#     但本安装程序最多只能处理 ${VIM_MAX_OLD_VER} 个版本。$\r$\n\
+#     请您手工删除一些旧版本以后再运行本安装程序。"
+
+#LangString str_msg_invalid_root  ${LANG_SIMPCHINESE} \
+#    "安装路径“$vim_install_root”无效！$\r$\n\
+#     该路径必须以 vim 结尾。"
+
+#LangString str_msg_bin_mismatch  ${LANG_SIMPCHINESE} \
+#    "Vim 执行程序安装路径异常！$\r$\n$\r$\n\
+#     该版本 Vim 的执行程序安装路径应该是“$vim_bin_path”,$\r$\n\
+#     而系统却指示该路径为“$INSTDIR”。"
+
+#LangString str_msg_vim_running   ${LANG_SIMPCHINESE} \
+#    "您的系统上仍有 Vim 在运行，$\r$\n\
+#     请您在执行后续步骤前退出这些 Vim。"
+
+#LangString str_msg_register_ole  ${LANG_SIMPCHINESE} \
+#    "试图注册 Vim OLE 服务器。请注意无论成功与否都不再显示进一步的信息。"
+
+#LangString str_msg_unreg_ole     ${LANG_SIMPCHINESE} \
+#    "试图注销 Vim OLE 服务器。请注意无论成功与否都不再显示进一步的信息。"
+
+#LangString str_msg_rm_start      ${LANG_SIMPCHINESE} \
+#    "开始卸载以下版本："
+
+#LangString str_msg_rm_fail       ${LANG_SIMPCHINESE} \
+#    "以下版本卸载失败："
+
+#LangString str_msg_no_rm_key     ${LANG_SIMPCHINESE} \
+#    "找不到卸载程序的注册表键。"
+
+#LangString str_msg_no_rm_reg     ${LANG_SIMPCHINESE} \
+#    "在注册表中未找到卸载程序路径。"
+
+#LangString str_msg_no_rm_exe     ${LANG_SIMPCHINESE} \
+#    "找不到卸载程序。"
+
+#LangString str_msg_rm_copy_fail  ${LANG_SIMPCHINESE} \
+#    "无法将卸载程序复制到临时目录。"
+
+#LangString str_msg_rm_run_fail   ${LANG_SIMPCHINESE} \
+#    "执行卸载程序失败。"
+
+#LangString str_msg_abort_install ${LANG_SIMPCHINESE} \
+#    "安装程序将退出。"
+
+LangString str_msg_install_fail  ${LANG_SIMPCHINESE} \
+    "安装失败。祝您下次好运。"
+
+LangString str_msg_rm_exe_fail   ${LANG_SIMPCHINESE} \
+    "目录“$0”下有部分文件删除失败！$\r$\n\
+     您只能手工删除该目录。"
+
+#LangString str_msg_rm_root_fail  ${LANG_SIMPCHINESE} \
+#    "警告：无法删除 Vim 安装目录“$vim_install_root”，\
+#     该目录下仍有其他文件。"
+
+LangString str_msg_uninstalling  ${LANG_SIMPCHINESE} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_SIMPCHINESE} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_SIMPCHINESE} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_SIMPCHINESE} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_SIMPCHINESE} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_SIMPCHINESE} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_SIMPCHINESE} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_SIMPCHINESE} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_SIMPCHINESE} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_SIMPCHINESE} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_SIMPCHINESE} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_SIMPCHINESE} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_SIMPCHINESE} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_SIMPCHINESE} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_SIMPCHINESE} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_SIMPCHINESE} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_SIMPCHINESE} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_SIMPCHINESE} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_SIMPCHINESE} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_SIMPCHINESE} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/lang/tradchinese.nsi

@@ -0,0 +1,278 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# tradchinese.nsi: Traditional Chinese language strings for gvim NSIS
+# installer.
+#
+# Locale ID    : 1028
+# fileencoding : UTF-8
+# Author       : Guopeng Wen
+
+!insertmacro MUI_LANGUAGE "TradChinese"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_TRADCHINESE} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_TRADCHINESE} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_TRADCHINESE} \
+#    "安裝資料夾 (必須以 vim 結尾)"
+
+LangString str_show_readme          ${LANG_TRADCHINESE} \
+    "安裝完成後顯示 README 檔案"
+
+# Install types:
+LangString str_type_typical         ${LANG_TRADCHINESE} \
+    "典型安裝"
+
+LangString str_type_minimal         ${LANG_TRADCHINESE} \
+    "最小安裝"
+
+LangString str_type_full            ${LANG_TRADCHINESE} \
+    "完全安裝"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_TRADCHINESE} \
+    "移除舊版本"
+LangString str_desc_old_ver         ${LANG_TRADCHINESE} \
+    "移除閣下電腦上舊版本的 Vim。"
+
+LangString str_section_exe          ${LANG_TRADCHINESE} \
+    "安裝 Vim 圖形界面程式"
+LangString str_desc_exe             ${LANG_TRADCHINESE} \
+    "安裝 Vim 圖形界面程式及腳本。此為必選安裝。"
+
+LangString str_section_console      ${LANG_TRADCHINESE} \
+    "安裝 Vim 命令行程式"
+LangString str_desc_console         ${LANG_TRADCHINESE} \
+    "安裝 Vim 命令行程式 (vim.exe)。該程式在控制臺窗口中運行。"
+
+LangString str_section_batch        ${LANG_TRADCHINESE} \
+    "安裝批次檔案"
+LangString str_desc_batch           ${LANG_TRADCHINESE} \
+    "為 Vim 的各種變體創建批次檔，以便在命令行下啟動 Vim。"
+
+LangString str_group_icons          ${LANG_TRADCHINESE} \
+    "建立 Vim 圖示"
+LangString str_desc_icons           ${LANG_TRADCHINESE} \
+    "建立若干 Vim 圖示，以便于使用 Vim。"
+
+LangString str_section_desktop      ${LANG_TRADCHINESE} \
+    "於桌面"
+LangString str_desc_desktop         ${LANG_TRADCHINESE} \
+    "建立若干 Vim 圖示於桌面上，以方便啟動 Vim。"
+
+LangString str_section_start_menu   ${LANG_TRADCHINESE} \
+    "於「開始」功能表的「程式」集"
+LangString str_desc_start_menu      ${LANG_TRADCHINESE} \
+    "在「開始」功能表的「程式」集中建立 Vim 啟動組。\
+     適用于 Windows 95 及以上版本。"
+
+#LangString str_section_quick_launch ${LANG_TRADCHINESE} \
+#    "於快速啟動列"
+#LangString str_desc_quick_launch    ${LANG_TRADCHINESE} \
+#    "在快速啟動列中建立 Vim 圖示。"
+
+LangString str_section_edit_with    ${LANG_TRADCHINESE} \
+    "安裝快捷選單"
+LangString str_desc_edit_with       ${LANG_TRADCHINESE} \
+    "在「打開方式」快捷選單中添加 Vim 項。"
+
+#LangString str_section_edit_with32  ${LANG_TRADCHINESE} \
+#    "32 位元版本"
+#LangString str_desc_edit_with32     ${LANG_TRADCHINESE} \
+#    "在 32 位元程式的「打開方式」快捷選單中添加 Vim 項。"
+
+#LangString str_section_edit_with64  ${LANG_TRADCHINESE} \
+#    "64 位元版本"
+#LangString str_desc_edit_with64     ${LANG_TRADCHINESE} \
+#    "在 64 位元程式的「打開方式」快捷選單中添加 Vim 項。"
+
+LangString str_section_vim_rc       ${LANG_TRADCHINESE} \
+    "建立默認設定檔"
+LangString str_desc_vim_rc          ${LANG_TRADCHINESE} \
+    "在安裝資料夾下建立默認的 Vim 設定檔(_vimrc)。\
+     若該設定檔已經存在，則略過此項。"
+
+LangString str_group_plugin         ${LANG_TRADCHINESE} \
+    "建立插件資料夾"
+LangString str_desc_plugin          ${LANG_TRADCHINESE} \
+    "建立(空的)插件資料夾結構。插件資料夾用于安裝 Vim 的擴展插件，\
+     只要將檔案復制到相關的子資料夾中即可。"
+
+LangString str_section_plugin_home  ${LANG_TRADCHINESE} \
+    "建立插件資料夾"
+LangString str_desc_plugin_home     ${LANG_TRADCHINESE} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_TRADCHINESE} \
+    "建立共享插件資料夾"
+LangString str_desc_plugin_vim      ${LANG_TRADCHINESE} \
+    "在 Vim 安裝資料夾下建立(空的)插件資料夾結構，電腦上所有用戶都能使用安裝\
+     在該資料夾里的擴展插件。"
+
+LangString str_section_vis_vim      ${LANG_TRADCHINESE} \
+    "安裝 VisVim 插件"
+LangString str_desc_vis_vim         ${LANG_TRADCHINESE} \
+    "VisVim 是用于與微軟 Microsoft Visual Studio 軟體進行整合的插件。"
+
+LangString str_section_nls          ${LANG_TRADCHINESE} \
+    "安裝本地語言支持"
+LangString str_desc_nls             ${LANG_TRADCHINESE} \
+    "安裝用于支持本地語言的檔案。"
+
+LangString str_unsection_register   ${LANG_TRADCHINESE} \
+    "移除 Vim 系統設定"
+LangString str_desc_unregister      ${LANG_TRADCHINESE} \
+    "移除與 Vim 相關的系統設定。"
+
+LangString str_unsection_exe        ${LANG_TRADCHINESE} \
+    "移除 Vim 程式及腳本"
+LangString str_desc_rm_exe          ${LANG_TRADCHINESE} \
+    "移除所有的 Vim 程式及腳本。"
+
+LangString str_ungroup_plugin       ${LANG_TRADCHINESE} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_TRADCHINESE} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_TRADCHINESE} \
+    "Private"
+LangString str_desc_rm_plugin_home  ${LANG_TRADCHINESE} \
+    "Remove the vimfiles directory in HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_TRADCHINESE} \
+    "Shared"
+LangString str_desc_rm_plugin_vim   ${LANG_TRADCHINESE} \
+    "Remove the vimfiles directory in Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_TRADCHINESE} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_TRADCHINESE} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_TRADCHINESE} \
+#    "閣下的電腦上安裝了 $vim_old_ver_count 個不同版本的 Vim，$\r$\n\
+#     但是本安裝程式最多只能處理 ${VIM_MAX_OLD_VER} 個版本。$\r$\n\
+#     煩請閣下手工移除一些版本以后再運行本安裝程式。"
+
+#LangString str_msg_invalid_root  ${LANG_TRADCHINESE} \
+#    "安裝資料夾「$vim_install_root」無效！$\r$\n\
+#     該資料夾必須以「vim」結尾。"
+
+#LangString str_msg_bin_mismatch  ${LANG_TRADCHINESE} \
+#    "Vim 執行程式安裝路徑異常！$\r$\n$\r$\n\
+#     該版本 Vim 的執行程式安裝路徑應該是「$vim_bin_path」,$\r$\n\
+#     而系統卻指示該路徑為「$INSTDIR」。"
+
+#LangString str_msg_vim_running   ${LANG_TRADCHINESE} \
+#    "閣下的電腦上尚有正在運行之 Vim，$\r$\n\
+#     煩請閣下在執行后續步驟前將其全部退出。"
+
+#LangString str_msg_register_ole  ${LANG_TRADCHINESE} \
+#    "試圖注冊 Vim OLE 伺服程式。請注意不論成功與否都不再顯示進一步的信息。"
+
+#LangString str_msg_unreg_ole     ${LANG_TRADCHINESE} \
+#    "試圖注銷 Vim OLE 伺服程式。請注意不論成功與否都不再顯示進一步的信息。"
+
+#LangString str_msg_rm_start      ${LANG_TRADCHINESE} \
+#    "正移除如下版本："
+
+#LangString str_msg_rm_fail       ${LANG_TRADCHINESE} \
+#    "以下版本移除失敗："
+
+#LangString str_msg_no_rm_key     ${LANG_TRADCHINESE} \
+#    "找不到反安裝程式的登錄檔入口。"
+
+#LangString str_msg_no_rm_reg     ${LANG_TRADCHINESE} \
+#    "在登錄檔中未找到反安裝程式路徑。"
+
+#LangString str_msg_no_rm_exe     ${LANG_TRADCHINESE} \
+#    "找不到反安裝程式。"
+
+#LangString str_msg_rm_copy_fail  ${LANG_TRADCHINESE} \
+#    "無法將法將反安裝程式复制到臨時目錄。"
+
+#LangString str_msg_rm_run_fail   ${LANG_TRADCHINESE} \
+#    "執行反安裝程式失敗。"
+
+#LangString str_msg_abort_install ${LANG_TRADCHINESE} \
+#    "安裝程式將退出。"
+
+LangString str_msg_install_fail  ${LANG_TRADCHINESE} \
+    "安裝失敗。預祝下次好運。"
+
+LangString str_msg_rm_exe_fail   ${LANG_TRADCHINESE} \
+    "資料夾「$0」下有部分檔案未能移除！$\r$\n\
+     閣下只能手工移除該資料夾。"
+
+#LangString str_msg_rm_root_fail  ${LANG_TRADCHINESE} \
+#    "警告：無法刪除 Vim 安裝資料夾「$vim_install_root」，\
+#     該資料夾下仍有其他檔案。"
+
+LangString str_msg_uninstalling  ${LANG_TRADCHINESE} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_TRADCHINESE} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_TRADCHINESE} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_TRADCHINESE} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_TRADCHINESE} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_TRADCHINESE} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_TRADCHINESE} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_TRADCHINESE} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_TRADCHINESE} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_TRADCHINESE} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_TRADCHINESE} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_TRADCHINESE} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_TRADCHINESE} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_TRADCHINESE} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_TRADCHINESE} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_TRADCHINESE} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_TRADCHINESE} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_TRADCHINESE} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_TRADCHINESE} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_TRADCHINESE} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/vimrc.ini

@@ -1,68 +0,0 @@
-[Settings]
-NumFields=7
-
-[Field 1]
-Type=GroupBox
-Left=0
-Right=-1
-Top=0
-Bottom=53
-Text=" Key remapping "
-
-[Field 2]
-Type=radiobutton
-Text=Do not remap keys for Windows behavior (Default)
-Left=10
-Right=-10
-Top=17
-Bottom=25
-State=1
-Flags=GROUP
-
-[Field 3]
-Type=radiobutton
-Text=Remap a few keys for Windows behavior (<C-V>, <C-C>, <C-A>, <C-S>, <C-F>, etc)
-Left=10
-Right=-10
-Top=30
-Bottom=47
-State=0
-Flags=NOTABSTOP
-
-[Field 4]
-Type=GroupBox
-Left=0
-Right=-1
-Top=55
-Bottom=-5
-Text=" Mouse behavior "
-
-[Field 5]
-Type=radiobutton
-Text=Right button extends selection, left button starts visual mode (Unix)
-Left=10
-Right=-5
-Top=72
-Bottom=80
-State=0
-Flags=GROUP
-
-[Field 6]
-Type=radiobutton
-Text=Right button has a popup menu, left button starts select mode (Windows)
-Left=10
-Right=-5
-Top=85
-Bottom=93
-State=0
-Flags=NOTABSTOP
-
-[Field 7]
-Type=radiobutton
-Text=Right button has a popup menu, left button starts visual mode (Default)
-Left=10
-Right=-5
-Top=98
-Bottom=106
-State=1
-Flags=NOTABSTOP

runtime/autoload/RstFold.vim

@@ -1,8 +1,12 @@
 " Author: Antony Lee <anntzer.lee@gmail.com>
 " Description: Helper functions for reStructuredText syntax folding
-" Last Modified: 2018-01-07
+" Last Modified: 2018-12-29
 
 function s:CacheRstFold()
+  if !g:rst_fold_enabled
+    return
+  endif
+
   let closure = {'header_types': {}, 'max_level': 0, 'levels': {}}
   function closure.Process(match) dict
     let curline = getcurpos()[1]
@@ -20,12 +24,18 @@ function s:CacheRstFold()
     let self.levels[curline] = self.header_types[key]
   endfunction
   let save_cursor = getcurpos()
+  let save_mark = getpos("'[")
   silent keeppatterns %s/\v^%(%(([=`:.'"~^_*+#-])\1+\n)?.{1,2}\n([=`:.'"~^_*+#-])\2+)|%(%(([=`:.''"~^_*+#-])\3{2,}\n)?.{3,}\n([=`:.''"~^_*+#-])\4{2,})$/\=closure.Process(submatch(0))/gn
   call setpos('.', save_cursor)
+  call setpos("'[", save_mark)
   let b:RstFoldCache = closure.levels
 endfunction
 
 function RstFold#GetRstFold()
+  if !g:rst_fold_enabled
+    return
+  endif
+
   if !has_key(b:, 'RstFoldCache')
     call s:CacheRstFold()
   endif
@@ -37,6 +47,10 @@ function RstFold#GetRstFold()
 endfunction
 
 function RstFold#GetRstFoldText()
+  if !g:rst_fold_enabled
+    return
+  endif
+
   if !has_key(b:, 'RstFoldCache')
     call s:CacheRstFold()
   endif

runtime/autoload/ccomplete.vim

@@ -1,7 +1,7 @@
 " Vim completion script
 " Language:	C
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2012 Jun 20
+" Last Change:	2018 Aug 20
 
 let s:cpo_save = &cpo
 set cpo&vim
@@ -72,8 +72,10 @@ function! ccomplete#Complete(findstart, base)
   " Split item in words, keep empty word after "." or "->".
   " "aa" -> ['aa'], "aa." -> ['aa', ''], "aa.bb" -> ['aa', 'bb'], etc.
   " We can't use split, because we need to skip nested [...].
+  " "aa[...]" -> ['aa', '[...]'], "aa.bb[...]" -> ['aa', 'bb', '[...]'], etc.
   let items = []
   let s = 0
+  let arrays = 0
   while 1
     let e = match(base, '\.\|->\|\[', s)
     if e < 0
@@ -107,6 +109,7 @@ function! ccomplete#Complete(findstart, base)
       endwhile
       let e += 1
       call add(items, strpart(base, s, e - s))
+      let arrays += 1
       let s = e
     endif
   endwhile
@@ -161,15 +164,26 @@ function! ccomplete#Complete(findstart, base)
 	endif
       endif
       let res = [{'match': match, 'tagline' : '', 'kind' : kind, 'info' : line}]
+    elseif len(items) == arrays + 1
+      " Completing one word and it's a local array variable: build tagline
+      " from declaration line
+      let match = items[0]
+      let kind = 'v'
+      let tagline = "\t/^" . line . '$/'
+      let res = [{'match': match, 'tagline' : tagline, 'kind' : kind, 'info' : line}]
     else
       " Completing "var.", "var.something", etc.
       let res = s:Nextitem(strpart(line, 0, col), items[1:], 0, 1)
     endif
   endif
 
-  if len(items) == 1
+  if len(items) == 1 || len(items) == arrays + 1
     " Only one part, no "." or "->": complete from tags file.
+    if len(items) == 1
       let tags = taglist('^' . base)
+    else
+      let tags = taglist('^' . items[0] . '$')
+    endif
 
     " Remove members, these can't appear without something in front.
     call filter(tags, 'has_key(v:val, "kind") ? v:val["kind"] != "m" : 1')
@@ -516,11 +530,24 @@ function! s:StructMembers(typename, items, all)
     endif
   endif
 
+  " Skip over [...] items
+  let idx = 0
+  while 1
+    if idx >= len(a:items)
+      let target = ''		" No further items, matching all members
+      break
+    endif
+    if a:items[idx][0] != '['
+      let target = a:items[idx]
+      break
+    endif
+    let idx += 1
+  endwhile
   " Put matching members in matches[].
   let matches = []
   for l in qflist
     let memb = matchstr(l['text'], '[^\t]*')
-    if memb =~ '^' . a:items[0]
+    if memb =~ '^' . target
       " Skip matches local to another file.
       if match(l['text'], "\tfile:") < 0 || bufnr('%') == bufnr(matchstr(l['text'], '\t\zs[^\t]*'))
 	let item = {'match': memb, 'tagline': l['text']}
@@ -540,8 +567,8 @@ function! s:StructMembers(typename, items, all)
   endfor
 
   if len(matches) > 0
-    " Skip over [...] items
-    let idx = 1
+    " Skip over next [...] items
+    let idx += 1
     while 1
       if idx >= len(a:items)
 	return matches		" No further items, return the result.

runtime/autoload/dist/ft.vim

@@ -1,7 +1,7 @@
 " Vim functions for file type detection
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Dec 05
+" Last Change:	2019 Jan 18
 
 " These functions are moved here from runtime/filetype.vim to make startup
 " faster.
@@ -126,7 +126,7 @@ endfunc
 " This function checks if one of the first ten lines start with a '@'.  In
 " that case it is probably a change file.
 " If the first line starts with # or ! it's probably a ch file.
-" If a line has "main", "include", "//" ir "/*" it's probably ch.
+" If a line has "main", "include", "//" or "/*" it's probably ch.
 " Otherwise CHILL is assumed.
 func dist#ft#FTchange()
   let lnum = 1
@@ -197,7 +197,7 @@ func dist#ft#FTe()
     exe 'setf ' . g:filetype_euphoria
   else
     let n = 1
-    while n < 100 && n < line("$")
+    while n < 100 && n <= line("$")
       if getline(n) =~ "^\\s*\\(<'\\|'>\\)\\s*$"
 	setf specman
 	return
@@ -211,7 +211,7 @@ endfunc
 " Distinguish between HTML, XHTML and Django
 func dist#ft#FThtml()
   let n = 1
-  while n < 10 && n < line("$")
+  while n < 10 && n <= line("$")
     if getline(n) =~ '\<DTD\s\+XHTML\s'
       setf xhtml
       return
@@ -222,13 +222,13 @@ func dist#ft#FThtml()
     endif
     let n = n + 1
   endwhile
-  setf html
+  setf FALLBACK html
 endfunc
 
 " Distinguish between standard IDL and MS-IDL
 func dist#ft#FTidl()
   let n = 1
-  while n < 50 && n < line("$")
+  while n < 50 && n <= line("$")
     if getline(n) =~ '^\s*import\s\+"\(unknwn\|objidl\)\.idl"'
       setf msidl
       return
@@ -484,6 +484,10 @@ endfunc
 
 " Called from filetype.vim and scripts.vim.
 func dist#ft#SetFileTypeSH(name)
+  if did_filetype()
+    " Filetype was already detected
+    return
+  endif
   if expand("<amatch>") =~ g:ft_ignore_pat
     return
   endif
@@ -531,6 +535,10 @@ endfunc
 " as used for Tcl.
 " Also called from scripts.vim, thus can't be local to this script.
 func dist#ft#SetFileTypeShell(name)
+  if did_filetype()
+    " Filetype was already detected
+    return
+  endif
   if expand("<amatch>") =~ g:ft_ignore_pat
     return
   endif
@@ -551,6 +559,10 @@ func dist#ft#SetFileTypeShell(name)
 endfunc
 
 func dist#ft#CSH()
+  if did_filetype()
+    " Filetype was already detected
+    return
+  endif
   if exists("g:filetype_csh")
     call dist#ft#SetFileTypeShell(g:filetype_csh)
   elseif &shell =~ "tcsh"
@@ -632,7 +644,7 @@ endfunc
 " Choose context, plaintex, or tex (LaTeX) based on these rules:
 " 1. Check the first line of the file for "%&<format>".
 " 2. Check the first 1000 non-comment lines for LaTeX or ConTeXt keywords.
-" 3. Default to "latex" or to g:tex_flavor, can be set in user's vimrc.
+" 3. Default to "plain" or to g:tex_flavor, can be set in user's vimrc.
 func dist#ft#FTtex()
   let firstline = getline(1)
   if firstline =~ '^%&\s*\a\+'
@@ -687,7 +699,7 @@ endfunc
 
 func dist#ft#FTxml()
   let n = 1
-  while n < 100 && n < line("$")
+  while n < 100 && n <= line("$")
     let line = getline(n)
     " DocBook 4 or DocBook 5.
     let is_docbook4 = line =~ '<!DOCTYPE.*DocBook'
@@ -713,7 +725,7 @@ endfunc
 
 func dist#ft#FTy()
   let n = 1
-  while n < 100 && n < line("$")
+  while n < 100 && n <= line("$")
     let line = getline(n)
     if line =~ '^\s*%'
       setf yacc

runtime/autoload/paste.vim

@@ -1,20 +1,15 @@
 " Vim support file to help with paste mappings and menus
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Aug 30
+" Last Change:	2019 Jan 27
 
 " Define the string to use for items that are present both in Edit, Popup and
 " Toolbar menu.  Also used in mswin.vim and macmap.vim.
 
-" Pasting blockwise and linewise selections is not possible in Insert and
-" Visual mode without the +virtualedit feature.  They are pasted as if they
-" were characterwise instead.  Add to that some tricks to leave the cursor in
-" the right position, also for "gi".
-if has("virtualedit")
-  let paste#paste_cmd = {'n': ":call paste#Paste()<CR>"}
-  let paste#paste_cmd['v'] = '"-c<Esc>' . paste#paste_cmd['n']
-  let paste#paste_cmd['i'] = "\<c-\>\<c-o>\"+gP"
+let paste#paste_cmd = {'n': ":call paste#Paste()<CR>"}
+let paste#paste_cmd['v'] = '"-c<Esc>' . paste#paste_cmd['n']
+let paste#paste_cmd['i'] = "\<c-\>\<c-o>\"+gP"
 
-  func! paste#Paste()
+func! paste#Paste()
   let ove = &ve
   set ve=all
   normal! `^
@@ -27,9 +22,4 @@ if has("virtualedit")
     normal! l
   endif
   let &ve = ove
-  endfunc
-else
-  let paste#paste_cmd = {'n': "\"=@+.'xy'<CR>gPFx\"_2x"}
-  let paste#paste_cmd['v'] = '"-c<Esc>gix<Esc>' . paste#paste_cmd['n'] . '"_x'
-  let paste#paste_cmd['i'] = 'x<Esc>' . paste#paste_cmd['n'] . '"_s'
-endif
+endfunc

runtime/autoload/phpcomplete.vim

@@ -3,7 +3,7 @@
 " Maintainer:	Dávid Szabó ( complex857 AT gmail DOT com )
 " Previous Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
 " URL: https://github.com/shawncplus/phpcomplete.vim
-" Last Change:  2016 Oct 10
+" Last Change:  2018 Oct 10
 "
 "	OPTIONS:
 "
@@ -146,6 +146,8 @@ function! phpcomplete#CompletePHP(findstart, base) " {{{
 	end
 
 	try
+		let eventignore = &eventignore
+		let &eventignore = 'all'
 		let winheight = winheight(0)
 		let winnr = winnr()
 
@@ -216,6 +218,7 @@ function! phpcomplete#CompletePHP(findstart, base) " {{{
 		endif
 	finally
 		silent! exec winnr.'resize '.winheight
+		let &eventignore = eventignore
 	endtry
 endfunction
 " }}}
@@ -1393,13 +1396,15 @@ function! phpcomplete#GetCallChainReturnType(classname_candidate, class_candidat
 			for classstructure in classcontents
 				let docblock_target_pattern = 'function\s\+&\?'.method.'\>\|\(public\|private\|protected\|var\).\+\$'.method.'\>\|@property.\+\$'.method.'\>'
 				let doc_str = phpcomplete#GetDocBlock(split(classstructure.content, '\n'), docblock_target_pattern)
-				if doc_str != ''
+				let return_type_hint = phpcomplete#GetFunctionReturnTypeHint(split(classstructure.content, '\n'), 'function\s\+&\?'.method.'\>')
+				if doc_str != '' || return_type_hint != ''
 					break
 				endif
 			endfor
-			if doc_str != ''
+			if doc_str != '' || return_type_hint != ''
 				let docblock = phpcomplete#ParseDocBlock(doc_str)
-				if has_key(docblock.return, 'type') || has_key(docblock.var, 'type') || len(docblock.properties) > 0
+				if has_key(docblock.return, 'type') || has_key(docblock.var, 'type') || len(docblock.properties) > 0 || return_type_hint != ''
+					if return_type_hint == ''
 						let type = has_key(docblock.return, 'type') ? docblock.return.type : has_key(docblock.var, 'type') ? docblock.var.type : ''
 
 						if type == ''
@@ -1410,6 +1415,9 @@ function! phpcomplete#GetCallChainReturnType(classname_candidate, class_candidat
 								endif
 							endfor
 						endif
+					else
+						let type = return_type_hint
+					end
 
 					" there's a namespace in the type, threat the type as FQCN
 					if type =~ '\\'
@@ -1483,7 +1491,7 @@ function! phpcomplete#GetMethodStack(line) " {{{
 			continue
 		endif
 
-		" if it's looks like a string
+		" if it looks like a string
 		if current_char == "'" || current_char == '"'
 			" and it is not escaped
 			if prev_char != '\' || (prev_char == '\' && prev_prev_char == '\')
@@ -1587,9 +1595,11 @@ function! phpcomplete#GetClassName(start_line, context, current_namespace, impor
 		elseif function_file != '' && filereadable(function_file)
 			let file_lines = readfile(function_file)
 			let docblock_str = phpcomplete#GetDocBlock(file_lines, 'function\s*&\?\<'.function_name.'\>')
+			let return_type_hint = phpcomplete#GetFunctionReturnTypeHint(file_lines, 'function\s*&\?'.function_name.'\>')
 			let docblock = phpcomplete#ParseDocBlock(docblock_str)
-			if has_key(docblock.return, 'type')
-				let classname_candidate = docblock.return.type
+			let type = has_key(docblock.return, 'type') ? docblock.return.type : return_type_hint
+			if type != ''
+				let classname_candidate = type
 				let [class_candidate_namespace, function_imports] = phpcomplete#GetCurrentNameSpace(file_lines)
 				" try to expand the classname of the returned type with the context got from the function's source file
 
@@ -1821,9 +1831,11 @@ function! phpcomplete#GetClassName(start_line, context, current_namespace, impor
 				elseif function_file != '' && filereadable(function_file)
 					let file_lines = readfile(function_file)
 					let docblock_str = phpcomplete#GetDocBlock(file_lines, 'function\s*&\?\<'.function_name.'\>')
+					let return_type_hint = phpcomplete#GetFunctionReturnTypeHint(file_lines, 'function\s*&\?'.function_name.'\>')
 					let docblock = phpcomplete#ParseDocBlock(docblock_str)
-					if has_key(docblock.return, 'type')
-						let classname_candidate = docblock.return.type
+					let type = has_key(docblock.return, 'type') ? docblock.return.type : return_type_hint
+					if type != ''
+						let classname_candidate = type
 						let [class_candidate_namespace, function_imports] = phpcomplete#GetCurrentNameSpace(file_lines)
 						" try to expand the classname of the returned type with the context got from the function's source file
 						let [classname_candidate, class_candidate_namespace] = phpcomplete#ExpandClassName(classname_candidate, class_candidate_namespace, function_imports)
@@ -2413,6 +2425,44 @@ function! phpcomplete#ParseDocBlock(docblock) " {{{
 endfunction
 " }}}
 
+function! phpcomplete#GetFunctionReturnTypeHint(sccontent, search)
+	let i = 0
+	let l = 0
+	let function_line_start = -1
+	let function_line_end = -1
+	let sccontent_len = len(a:sccontent)
+	let return_type = ''
+
+	while (i < sccontent_len)
+		let line = a:sccontent[i]
+		" search for a function declaration
+		if line =~? a:search
+			let l = i
+			let function_line_start = i
+			" now search for the first { where the function body starts
+			while l < sccontent_len
+				let line = a:sccontent[l]
+				if line =~? '\V{'
+					let function_line_end = l
+					break
+				endif
+				let l += 1
+			endwhile
+			break
+		endif
+		let i += 1
+	endwhile
+
+	" now grab the lines that holds the function declaration line
+	if function_line_start != -1 && function_line_end != -1
+		let function_line = join(a:sccontent[function_line_start :function_line_end], " ")
+		let class_name_pattern = '[a-zA-Z_\x7f-\xff\\][a-zA-Z_0-9\x7f-\xff\\]*'
+		let return_type = matchstr(function_line, '\c\s*:\s*\zs'.class_name_pattern.'\ze\s*{')
+	endif
+	return return_type
+
+endfunction
+
 function! phpcomplete#GetTypeFromDocBlockParam(docblock_type) " {{{
 	if a:docblock_type !~ '|'
 		return a:docblock_type
@@ -2572,7 +2622,7 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 			" find kind flags from tags or built in methods for the objects we extracted
 			" they can be either classes, interfaces or namespaces, no other thing is importable in php
 			for [key, import] in items(imports)
-				" if theres a \ in the name we have it's definetly not a built in thing, look for tags
+				" if theres a \ in the name we have it's definitely not a built in thing, look for tags
 				if import.name =~ '\\'
 					let patched_ctags_detected = 0
 					let [classname, namespace_for_classes] = phpcomplete#ExpandClassName(import.name, '\', {})

runtime/autoload/rubycomplete.vim

@@ -3,7 +3,7 @@
 " Maintainer:		Mark Guzman <segfault@hasno.info>
 " URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
-" Maintainer Version:   0.8.1
+" Last Change:		2019 Jan 06
 " ----------------------------------------------------------------------------
 "
 " Ruby IRB/Complete author: Keiju ISHITSUKA(keiju@ishitsuka.com)
@@ -103,7 +103,7 @@ function! s:GetBufferRubyEntity( name, type, ... )
     endif
 
     let curpos = getpos(".")
-    let [enum,ecol] = searchpairpos( crex, '', '\(end\|}\)', 'wr' )
+    let [enum,ecol] = searchpairpos( crex, '', '\(end\|}\)', 'W' )
     call cursor(lastpos[1], lastpos[2])
 
     if lnum > enum
@@ -253,15 +253,27 @@ class VimRubyCompletion
 
 # {{{ buffer analysis magic
   def load_requires
+
+    custom_paths = VIM::evaluate("get(g:, 'rubycomplete_load_paths', [])")
+
+    if !custom_paths.empty?
+      $LOAD_PATH.concat(custom_paths).uniq!
+    end
+
     buf = VIM::Buffer.current
     enum = buf.line_number
     nums = Range.new( 1, enum )
     nums.each do |x|
+
       ln = buf[x]
       begin
-        eval( "require %s" % $1 ) if /.*require\s*(.*)$/.match( ln )
-      rescue Exception
-        #ignore?
+        if /.*require_relative\s*(.*)$/.match( ln )
+          eval( "require %s" % File.expand_path($1) )
+        elsif /.*require\s*(["'].*?["'])/.match( ln )
+          eval( "require %s" % $1 )
+        end
+      rescue Exception => e
+        dprint e.inspect
       end
     end
   end
@@ -344,8 +356,13 @@ class VimRubyCompletion
         if x != cur_line
           next if x == 0
           ln = buf[x]
-          if /^\s*(module|class|def|include)\s+/.match(ln)
-            clscnt += 1 if $1 == "class"
+          is_const = false
+          if /^\s*(module|class|def|include)\s+/.match(ln) || is_const = /^\s*?[A-Z]([A-z]|[1-9])*\s*?[|]{0,2}=\s*?.+\s*?/.match(ln)
+            clscnt += 1 if /class|module/.match($1)
+            # We must make sure to load each constant only once to avoid errors
+            if is_const
+                ln.gsub!(/\s*?[|]{0,2}=\s*?/, '||=')
+            end
             #dprint "\$1$1
             classdef += "%s\n" % ln
             classdef += "end\n" if /def\s+/.match(ln)
@@ -423,7 +440,6 @@ class VimRubyCompletion
     return get_buffer_entity_list( "class" )
   end
 
-
   def load_rails
     allow_rails = VIM::evaluate("exists('g:rubycomplete_rails') && g:rubycomplete_rails")
     return if allow_rails.to_i.zero?
@@ -529,7 +545,6 @@ class VimRubyCompletion
         ret += ActiveRecord::ConnectionAdapters::SchemaStatements.methods
     end
 
-
     return ret
   end
 
@@ -587,13 +602,15 @@ class VimRubyCompletion
 # {{{ main completion code
   def self.preload_rails
     a = VimRubyCompletion.new
-    require 'Thread'
+    if VIM::evaluate("has('nvim')") == 0
+      require 'thread'
       Thread.new(a) do |b|
         begin
         b.load_rails
         rescue
         end
       end
+    end
     a.load_rails
   rescue
   end
@@ -613,7 +630,6 @@ class VimRubyCompletion
     want_gems = VIM::evaluate("get(g:, 'rubycomplete_load_gemfile')")
     load_gems unless want_gems.to_i.zero?
 
-
     input = VIM::Buffer.current.line
     cpos = VIM::Window.current.cursor[1] - 1
     input = input[0..cpos]
@@ -666,6 +682,7 @@ class VimRubyCompletion
         message = Regexp.quote($4)
         dprint "const or cls 2 [recv: \'%s\', msg: \'%s\']" % [ receiver, message ]
         load_buffer_class( receiver )
+        load_buffer_module( receiver )
         begin
           classes = eval("#{receiver}.constants")
           #methods = eval("#{receiver}.methods")
@@ -786,7 +803,6 @@ class VimRubyCompletion
       methods += Kernel.public_methods
     end
 
-
     include_object = VIM::evaluate("exists('g:rubycomplete_include_object') && g:rubycomplete_include_object")
     methods = clean_sel( methods, message )
     methods = (methods-Object.instance_methods) if include_object == "0"
@@ -829,5 +845,4 @@ let s:rubycomplete_rails_loaded = 0
 call s:DefRuby()
 "}}} ruby-side code
 
-
 " vim:tw=78:sw=4:ts=8:et:fdm=marker:ft=vim:norl:

runtime/autoload/tar.vim

@@ -152,10 +152,12 @@ fun! tar#Browse(tarfile)
    " assuming cygwin
    let tarfile=substitute(system("cygpath -u ".shellescape(tarfile,0)),'\n$','','e')
   endif
+
   let curlast= line("$")
   if tarfile =~# '\.\(gz\|tgz\)$'
+    let gzip_command = s:get_gzip_command(tarfile)
 "   call Decho("1: exe silent r! gzip -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - ")
-   exe "sil! r! gzip -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
+   exe "sil! r! " . gzip_command . " -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
   elseif tarfile =~# '\.lrp'
 "   call Decho("2: exe silent r! cat -- ".shellescape(tarfile,1)."|gzip -d -c -|".g:tar_cmd." -".g:tar_browseoptions." - ")
    exe "sil! r! cat -- ".shellescape(tarfile,1)."|gzip -d -c -|".g:tar_cmd." -".g:tar_browseoptions." - "
@@ -287,12 +289,14 @@ fun! tar#Read(fname,mode)
   else
    let tar_secure= " "
   endif
+
   if tarfile =~# '\.bz2$'
 "   call Decho("7: exe silent r! bzip2 -d -c ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp)
    exe "sil! r! bzip2 -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
   elseif tarfile =~# '\.\(gz\|tgz\)$'
+    let gzip_command = s:get_gzip_command(tarfile)
 "   call Decho("5: exe silent r! gzip -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd.' -'.g:tar_readoptions.' - '.tar_secure.shellescape(fname,1))
-   exe "sil! r! gzip -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
+   exe "sil! r! " . gzip_command . " -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
   elseif tarfile =~# '\.lrp$'
 "   call Decho("6: exe silent r! cat ".shellescape(tarfile,1)." | gzip -d -c - | ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp)
    exe "sil! r! cat -- ".shellescape(tarfile,1)." | gzip -d -c - | ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
@@ -389,6 +393,8 @@ fun! tar#Write(fname)
   let tarfile = substitute(b:tarfile,'tarfile:\(.\{-}\)::.*$','\1','')
   let fname   = substitute(b:tarfile,'tarfile:.\{-}::\(.*\)$','\1','')
 
+  let gzip_command = s:get_gzip_command(tarfile)
+
   " handle compressed archives
   if tarfile =~# '\.bz2'
    call system("bzip2 -d -- ".shellescape(tarfile,0))
@@ -396,12 +402,12 @@ fun! tar#Write(fname)
    let compress= "bzip2 -- ".shellescape(tarfile,0)
 "   call Decho("compress<".compress.">")
   elseif tarfile =~# '\.gz'
-   call system("gzip -d -- ".shellescape(tarfile,0))
+   call system(gzip_command . " -d -- ".shellescape(tarfile,0))
    let tarfile = substitute(tarfile,'\.gz','','e')
    let compress= "gzip -- ".shellescape(tarfile,0)
 "   call Decho("compress<".compress.">")
   elseif tarfile =~# '\.tgz'
-   call system("gzip -d -- ".shellescape(tarfile,0))
+   call system(gzip_command . " -d -- ".shellescape(tarfile,0))
    let tarfile = substitute(tarfile,'\.tgz','.tar','e')
    let compress= "gzip -- ".shellescape(tarfile,0)
    let tgz     = 1
@@ -581,7 +587,10 @@ fun! tar#Vimuntar(...)
 
   " if necessary, decompress the tarball; then, extract it
   if tartail =~ '\.tgz'
-   if executable("gunzip")
+   let gzip_command = s:get_gzip_command(tarfile)
+   if executable(gzip_command)
+    silent exe "!" . gzip_command . " -d ".shellescape(tartail)
+   elseif executable("gunzip")
     silent exe "!gunzip ".shellescape(tartail)
    elseif executable("gzip")
     silent exe "!gzip -d ".shellescape(tartail)
@@ -619,6 +628,28 @@ fun! tar#Vimuntar(...)
 "  call Dret("tar#Vimuntar")
 endfun
 
+func s:get_gzip_command(file)
+  " Try using the "file" command to get the actual compression type, since
+  " there is no standard way for the naming: ".tgz", ".tbz", ".txz", etc.
+  " If the "file" command doesn't work fall back to just using the file name.
+  if a:file =~# 'z$'
+    let filetype = system('file ' . a:file)
+    if filetype =~ 'bzip2 compressed' && executable('bzip2')
+      return 'bzip2'
+    endif
+    if filetype =~ 'XZ compressed' && executable('xz')
+      return 'xz'
+    endif
+  endif
+  if a:file =~# 'bz2$'
+    return 'bzip2'
+  endif
+  if a:file =~# 'xz$'
+    return 'xz'
+  endif
+  return 'gzip'
+endfunc
+
 " =====================================================================
 " Modelines And Restoration: {{{1
 let &cpo= s:keepcpo

runtime/autoload/tohtml.vim

@@ -1,6 +1,6 @@
 " Vim autoload file for the tohtml plugin.
 " Maintainer: Ben Fritz <fritzophrenic@gmail.com>
-" Last Change: 2013 Sep 03
+" Last Change: 2018 Nov 11
 "
 " Additional contributors:
 "
@@ -544,12 +544,16 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     " add required javascript in reverse order so we can just call append again
     " and again without adjusting {{{
 
-    " insert script closing tag
+    let s:uses_script = s:settings.dynamic_folds || s:settings.line_ids || !empty(s:settings.prevent_copy)
+
+    " insert script closing tag if needed
+    if s:uses_script
       call append(style_start, [
 	    \ '',
 	    \ s:settings.use_xhtml ? '//]]>' : '-->',
 	    \ "</script>"
 	    \ ])
+    endif
 
     " insert script which corrects the size of small input elements in
     " prevent_copy mode. See 2html.vim for details on why this is needed and how
@@ -575,9 +579,10 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ '}'
 	    \ ])
     endif
-    "
+
     " insert javascript to get IDs from line numbers, and to open a fold before
     " jumping to any lines contained therein
+    if s:settings.line_ids
       call append(style_start, [
 	    \ "  /* Always jump to new location even if the line was hidden inside a fold, or",
 	    \ "   * we corrected the raw number to a line ID.",
@@ -591,6 +596,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ "  window.onhashchange = JumpToLine;",
 	    \ "}"
 	    \ ])
+
       if s:settings.dynamic_folds
 	call append(style_start, [
 	      \ "",
@@ -607,6 +613,9 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	      \ "  }",
 	      \ ])
       endif
+    endif
+
+    if s:settings.line_ids
       call append(style_start, [
 	    \ "",
 	    \ "/* function to open any folds containing a jumped-to line before jumping to it */",
@@ -622,8 +631,9 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ "  if (lineNum.indexOf('W') == -1) {",
 	    \ "    lineNum = 'W1'+lineNum;",
 	    \ "  }",
-	  \ "  lineElem = document.getElementById(lineNum);"
+	    \ "  var lineElem = document.getElementById(lineNum);"
 	    \ ])
+    endif
 
     " Insert javascript to toggle matching folds open and closed in all windows,
     " if dynamic folding is active.
@@ -648,11 +658,13 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ ])
     endif
 
+    if s:uses_script
       " insert script tag; javascript is always needed for the line number
       " normalization for URL hashes
       call append(style_start, [
 	    \ "<script type='text/javascript'>",
 	    \ s:settings.use_xhtml ? '//<![CDATA[' : "<!--"])
+    endif
 
     " Insert styles from all the generated html documents and additional styles
     " for the table-based layout of the side-by-side diff. The diff should take
@@ -767,7 +779,7 @@ func! tohtml#GetUserSettings() "{{{
     if user_settings.no_pre == 0
       call tohtml#GetOption(user_settings,
 	    \ 'expand_tabs',
-	    \ &expandtab || &ts != 8 || user_settings.number_lines ||
+	    \ &expandtab || &ts != 8 || &vts != '' || user_settings.number_lines ||
 	    \   (user_settings.dynamic_folds && !user_settings.no_foldcolumn))
     else
       let user_settings.expand_tabs = 1

runtime/autoload/xmlformat.vim

@@ -1,5 +1,5 @@
 " Vim plugin for formatting XML
-" Last Change: Thu, 22 May 2018 21:26:55 +0100
+" Last Change: Thu, 07 Dec 2018
 "     Version: 0.1
 "      Author: Christian Brabandt <cb@256bit.org>
 "  Repository: https://github.com/chrisbra/vim-xml-ftplugin
@@ -85,7 +85,11 @@ func! s:Trim(item)
 endfunc
 " Check if tag is a new opening tag <tag> {{{1
 func! s:StartTag(tag)
-  return a:tag =~? '^\s*<[^/?]'
+  let is_comment = s:IsComment(a:tag)
+  return a:tag =~? '^\s*<[^/?]' && !is_comment
+endfunc
+func! s:IsComment(tag)
+  return a:tag =~? '<!--'
 endfunc
 " Remove one level of indentation {{{1
 func! s:DecreaseIndent()

runtime/bugreport.vim

@@ -2,7 +2,7 @@
 :" information about the environment of a possible bug in Vim.
 :"
 :" Maintainer:	Bram Moolenaar <Bram@vim.org>
-:" Last change:	2005 Jun 12
+:" Last change:	2019 Jan 27
 :"
 :" To use inside Vim:
 :"	:so $VIMRUNTIME/bugreport.vim
@@ -54,9 +54,7 @@
 :endif
 :set all
 :set termcap
-:if has("autocmd")
-:  au
-:endif
+:au
 :if 1
 :  echo "--- Normal/Visual mode mappings ---"
 :endif

runtime/compiler/eruby.vim

@@ -3,6 +3,7 @@
 " Maintainer:		Doug Kearns <dougkearns@gmail.com>
 " URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:		2018 Jan 25
 
 if exists("current_compiler")
   finish
@@ -28,8 +29,8 @@ CompilerSet errorformat=
     \%W%f:%l:\ warning:\ %m,
     \%E%f:%l:in\ %*[^:]:\ %m,
     \%E%f:%l:\ %m,
-    \%-C%\tfrom\ %f:%l:in\ %.%#,
-    \%-Z%\tfrom\ %f:%l,
+    \%-C%\t%\\d%#:%#\ %#from\ %f:%l:in\ %.%#,
+    \%-Z%\t%\\d%#:%#\ %#from\ %f:%l,
     \%-Z%p^,
     \%-G%.%#
 

runtime/compiler/rake.vim

@@ -3,6 +3,7 @@
 " Maintainer:		Tim Pope <vimNOSPAM@tpope.org>
 " URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:		2018 Mar 02
 
 if exists("current_compiler")
   finish
@@ -20,12 +21,12 @@ CompilerSet makeprg=rake
 
 CompilerSet errorformat=
       \%D(in\ %f),
-      \%\\s%#from\ %f:%l:%m,
-      \%\\s%#from\ %f:%l:,
-      \%\\s%##\ %f:%l:%m,
-      \%\\s%##\ %f:%l,
-      \%\\s%#[%f:%l:\ %#%m,
-      \%\\s%#%f:%l:\ %#%m,
+      \%\\s%#%\\d%#:%#\ %#from\ %f:%l:%m,
+      \%\\s%#%\\d%#:%#\ %#from\ %f:%l:,
+      \%\\s%##\ %f:%l:%m%\\&%.%#%\\D:%\\d%\\+:%.%#,
+      \%\\s%##\ %f:%l%\\&%.%#%\\D:%\\d%\\+,
+      \%\\s%#[%f:%l:\ %#%m%\\&%.%#%\\D:%\\d%\\+:%.%#,
+      \%\\s%#%f:%l:\ %#%m%\\&%.%#%\\D:%\\d%\\+:%.%#,
       \%\\s%#%f:%l:,
       \%m\ [%f:%l]:,
       \%+Erake\ aborted!,

runtime/compiler/rspec.vim

@@ -3,6 +3,7 @@
 " Maintainer:		Tim Pope <vimNOSPAM@tpope.org>
 " URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:		2018 Aug 07
 
 if exists("current_compiler")
   finish
@@ -23,7 +24,8 @@ CompilerSet errorformat=
     \%E%.%#:in\ `load':\ %f:%l:%m,
     \%E%f:%l:in\ `%*[^']':\ %m,
     \%-Z\ \ \ \ \ %\\+\#\ %f:%l:%.%#,
-    \%E\ \ %\\d%\\+)%.%#,
+    \%E\ \ \ \ \ Failure/Error:\ %m,
+    \%E\ \ \ \ \ Failure/Error:,
     \%C\ \ \ \ \ %m,
     \%C%\\s%#,
     \%-G%.%#

runtime/compiler/ruby.vim

@@ -4,7 +4,7 @@
 " Maintainer:		Tim Pope <vimNOSPAM@tpope.org>
 " URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
-" ----------------------------------------------------------------------------
+" Last Change:		2019 Jan 06
 
 if exists("current_compiler")
   finish
@@ -21,21 +21,21 @@ set cpo-=C
 " default settings runs script normally
 " add '-c' switch to run syntax check only:
 "
-"   CompilerSet makeprg=ruby\ -wc\ $*
+"   CompilerSet makeprg=ruby\ -c
 "
 " or add '-c' at :make command line:
 "
 "   :make -c %<CR>
 "
-CompilerSet makeprg=ruby\ -w\ $*
+CompilerSet makeprg=ruby
 
 CompilerSet errorformat=
     \%+E%f:%l:\ parse\ error,
     \%W%f:%l:\ warning:\ %m,
     \%E%f:%l:in\ %*[^:]:\ %m,
     \%E%f:%l:\ %m,
-    \%-C%\tfrom\ %f:%l:in\ %.%#,
-    \%-Z%\tfrom\ %f:%l,
+    \%-C%\t%\\d%#:%#\ %#from\ %f:%l:in\ %.%#,
+    \%-Z%\t%\\d%#:%#\ %#from\ %f:%l,
     \%-Z%p^,
     \%-G%.%#
 

runtime/compiler/rubyunit.vim

@@ -3,6 +3,7 @@
 " Maintainer:		Doug Kearns <dougkearns@gmail.com>
 " URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:		2014 Mar 23
 
 if exists("current_compiler")
   finish

runtime/compiler/stack.vim

@@ -0,0 +1,37 @@
+" Vim compiler file
+" Compiler:         Haskell Stack
+" Maintainer:       Daniel Campoverde <alx@sillybytes.net>
+" Latest Revision:  2018-08-27
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "stack"
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+
+CompilerSet errorformat=
+    \%-G%.%#:\ build\ %.%#,
+    \%-G%.%#:\ configure\ %.%#,
+    \%-G[%.%#]%.%#,
+    \%-G%.%#preprocessing\ %.%#,
+    \%-G%.%#configuring\ %.%#,
+    \%-G%.%#building\ %.%#,
+    \%-G%.%#linking\ %.%#,
+    \%-G%.%#installing\ %.%#,
+    \%-G%.%#registering\ %.%#,
+    \%-G%.%#:\ copy/register%.%#,
+    \%-G%.%#process\ exited\ %.%#,
+    \%-G%.%#--builddir=%.%#,
+    \%-G--%.%#,
+    \%-G%.%#\|%.%#,
+    \%E%f:%l:%c:\ error:,%+Z\ \ \ \ %m,
+    \%E%f:%l:%c:\ error:\ %m,%-Z,
+    \%W%f:%l:%c:\ warning:,%+Z\ \ \ \ %m,
+    \%W%f:%l:%c:\ warning:\ %m,%-Z,
+
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/defaults.vim

@@ -1,7 +1,7 @@
 " The default vimrc file.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2017 Jun 13
+" Last change:	2019 Feb 18
 "
 " This is loaded if no vimrc file was found.
 " Except when Vim is run with "-u NONE" or "-C".
@@ -90,8 +90,8 @@ if &t_Co > 2 || has("gui_running")
   let c_comment_strings=1
 endif
 
-" Only do this part when compiled with support for autocommands.
-if has("autocmd")
+" Only do this part when Vim was compiled with the +eval feature.
+if 1
 
   " Enable file type detection.
   " Use the default filetype settings, so that mail gets 'tw' set to 72,
@@ -116,7 +116,7 @@ if has("autocmd")
 
   augroup END
 
-endif " has("autocmd")
+endif
 
 " Convenient command to see the difference between the current buffer and the
 " file it was loaded from, thus the changes you made.

runtime/delmenu.vim

@@ -5,6 +5,7 @@
 " Last Change:	2001 May 27
 
 aunmenu *
+tlunmenu *
 
 silent! unlet did_install_default_menus
 silent! unlet did_install_syntax_menu

runtime/doc/Makefile

@@ -102,6 +102,7 @@ DOCS = \
 	tagsrch.txt \
 	term.txt \
 	terminal.txt \
+	textprop.txt \
 	tips.txt \
 	todo.txt \
 	uganda.txt \
@@ -238,6 +239,7 @@ HTMLS = \
 	tagsrch.html \
 	term.html \
 	terminal.html \
+	textprop.html \
 	tips.html \
 	todo.html \
 	uganda.html \

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.1.  Last change: 2018 May 03
+*autocmd.txt*   For Vim version 8.1.  Last change: 2019 Mar 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -301,6 +301,7 @@ Name			triggered by ~
 |FileChangedShellPost|	After handling a file changed since editing started
 |FileChangedRO|		before making the first change to a read-only file
 
+|DiffUpdated|		after diffs have been updated
 |DirChanged|		after the working directory has changed
 
 |ShellCmdPost|		after executing a shell command
@@ -310,6 +311,7 @@ Name			triggered by ~
 |FuncUndefined|		a user function is used but it isn't defined
 |SpellFileMissing|	a spell file is used but it can't be found
 |SourcePre|		before sourcing a Vim script
+|SourcePost|		after sourcing a Vim script
 |SourceCmd|		before sourcing a Vim script |Cmd-event|
 
 |VimResized|		after the Vim window size changed
@@ -619,6 +621,8 @@ CursorMoved			After the cursor was moved in Normal or Visual
 				Not triggered when there is typeahead or when
 				an operator is pending.
 				For an example see |match-parens|.
+				Note: This can not be skipped with
+				`:noautocmd`.
 				Careful: This is triggered very often, don't
 				do anything that the user does not expect or
 				that is slow.
@@ -656,6 +660,11 @@ FileChangedRO			Before making the first change to a read-only
 							*E881*
 				If the number of lines changes saving for undo
 				may fail and the change will be aborted.
+							*DiffUpdated*
+DiffUpdated			After diffs have been updated.  Depending on
+				what kind of diff is being used (internal or
+				external) this can be triggered on every
+				change or when doing |:diffupdate|.
 							*DirChanged*
 DirChanged			The working directory has changed in response
 				to the |:cd| or |:lcd| commands, or as a
@@ -753,13 +762,14 @@ FilterReadPre			Before reading a file from a filter command.
 				Not triggered when 'shelltemp' is off.
 							*FilterWritePost*
 FilterWritePost			After writing a file for a filter command or
-				making a diff.
+				making a diff with an external diff (see
+				DiffUpdated for internal diff).
 				Vim checks the pattern against the name of
 				the current buffer as with FilterWritePre.
 				Not triggered when 'shelltemp' is off.
 							*FilterWritePre*
 FilterWritePre			Before writing a file for a filter command or
-				making a diff.
+				making a diff with an external diff.
 				Vim checks the pattern against the name of
 				the current buffer, not the name of the
 				temporary file that is the output of the
@@ -829,13 +839,14 @@ MenuPopup			Just before showing the popup menu (under the
 				right mouse button).  Useful for adjusting the
 				menu for what is under the cursor or mouse
 				pointer.
-				The pattern is matched against a single
-				character representing the mode:
+				The pattern is matched against one or two
+				characters representing the mode:
 					n	Normal
 					v	Visual
 					o	Operator-pending
 					i	Insert
 					c	Command line
+					tl	Terminal
 							*OptionSet*
 OptionSet			After setting an option.  The pattern is
 				matched against the long option name.
@@ -859,6 +870,9 @@ OptionSet			After setting an option.  The pattern is
 				plugin. You can always use `:noa` to prevent
 				triggering this autocommand.
 
+				When using |:set| in the autocommand the event
+				is not triggered again.
+
 							*QuickFixCmdPre*
 QuickFixCmdPre			Before a quickfix command is run (|:make|,
 				|:lmake|, |:grep|, |:lgrep|, |:grepadd|,
@@ -914,6 +928,12 @@ ShellFilterPost			After executing a shell command with
 							*SourcePre*
 SourcePre			Before sourcing a Vim script. |:source|
 				<afile> is the name of the file being sourced.
+							*SourcePost*
+SourcePost			After sourcing a Vim script. |:source|
+				<afile> is the name of the file being sourced.
+				Not triggered when sourcing was interrupted.
+				Also triggered after a SourceCmd autocommand
+				was triggered.
 							*SourceCmd*
 SourceCmd			When sourcing a Vim script. |:source|
 				<afile> is the name of the file being sourced.
@@ -1000,10 +1020,14 @@ TermResponse			After the response to |t_RV| is received from
 				anything else that takes time is involved.
 							*TextChanged*
 TextChanged			After a change was made to the text in the
-				current buffer in Normal mode.  That is when
-				|b:changedtick| has changed.
+				current buffer in Normal mode.  That is after
+				|b:changedtick| has changed (also when that
+				happened before the TextChanged autocommand
+				was defined).
 				Not triggered when there is typeahead or when
 				an operator is pending.
+				Note: This can not be skipped with
+				`:noautocmd`.
 				Careful: This is triggered very often, don't
 				do anything that the user does not expect or
 				that is slow.
@@ -1445,8 +1469,8 @@ If you want the buffer to be unmodified after changing it, reset the
 instead of ":q!".
 
 							*autocmd-nested* *E218*
-By default, autocommands do not nest.  If you use ":e" or ":w" in an
-autocommand, Vim does not execute the BufRead and BufWrite autocommands for
+By default, autocommands do not nest.  For example, if you use ":e" or ":w" in
+an autocommand, Vim does not execute the BufRead and BufWrite autocommands for
 those commands.  If you do want this, use the "nested" flag for those commands
 in which you want nesting.  For example: >
   :autocmd FileChangedShell *.c nested e!
@@ -1592,5 +1616,8 @@ following command.  Example: >
 This will write the file without triggering the autocommands defined by the
 gzip plugin.
 
+Note that some autocommands are not triggered right away, but only later.
+This specifically applies to |CursorMoved| and |TextChanged|.
+
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 8.1.  Last change: 2018 May 12
+*change.txt*    For Vim version 8.1.  Last change: 2019 Feb 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -476,6 +476,10 @@ SHIFTING LINES LEFT OR RIGHT				*shift-left-right*
 							*<*
 <{motion}		Shift {motion} lines one 'shiftwidth' leftwards.
 
+			If the 'vartabstop' feature is enabled, and the
+			'shiftwidth' option is set to zero, the amount of
+			indent is calculated at the first non-blank character
+			in the line.
 							*<<*
 <<			Shift [count] lines one 'shiftwidth' leftwards.
 
@@ -487,6 +491,10 @@ SHIFTING LINES LEFT OR RIGHT				*shift-left-right*
 							*>*
  >{motion}		Shift {motion} lines one 'shiftwidth' rightwards.
 
+			If the 'vartabstop' feature is enabled, and the
+			'shiftwidth' option is set to zero, the amount of
+			indent is calculated at the first non-blank character
+			in the line.
 							*>>*
  >>			Shift [count] lines one 'shiftwidth' rightwards.
 
@@ -632,11 +640,11 @@ For other systems the tmpnam() library function is used.
 			For the {pattern} see |pattern|.
 			{string} can be a literal string, or something
 			special; see |sub-replace-special|.
-							*E939*
 			When [range] and [count] are omitted, replace in the
 			current line only.  When [count] is given, replace in
 			[count] lines, starting with the last line in [range].
 			When [range] is omitted start in the current line.
+							*E939*
 			[count] must be a positive number.  Also see
 			|cmdline-ranges|.
 
@@ -708,6 +716,7 @@ The flags that you can use for the substitute commands:
 	search pattern.
 	{not in Vi: highlighting of the match, other responses than 'y' or 'n'}
 
+							*:s_e*
 [e]     When the search pattern fails, do not issue an error message and, in
 	particular, continue in maps as if no error occurred.  This is most
 	useful to prevent the "No match" error from breaking a mapping.  Vim
@@ -719,6 +728,7 @@ The flags that you can use for the substitute commands:
 		Interrupted
 	{not in Vi}
 
+							*:s_g*
 [g]	Replace all occurrences in the line.  Without this argument,
 	replacement occurs only for the first occurrence in each line.  If
 	the 'edcompatible' option is on, Vim remembers this flag and toggles
@@ -726,26 +736,30 @@ The flags that you can use for the substitute commands:
 	pattern.  If the 'gdefault' option is on, this flag is on by default
 	and the [g] argument switches it off.
 
+							*:s_i*
 [i]	Ignore case for the pattern.  The 'ignorecase' and 'smartcase' options
 	are not used.
 	{not in Vi}
 
+							*:s_I*
 [I]	Don't ignore case for the pattern.  The 'ignorecase' and 'smartcase'
 	options are not used.
 	{not in Vi}
 
+							*:s_n*
 [n]	Report the number of matches, do not actually substitute.  The [c]
 	flag is ignored.  The matches are reported as if 'report' is zero.
 	Useful to |count-items|.
 	If \= |sub-replace-expression| is used, the expression will be
 	evaluated in the |sandbox| at every match.
 
-[p]	Print the line containing the last substitute.
+[p]	Print the line containing the last substitute.  *:s_p*
 
-[#]	Like [p] and prepend the line number.
+[#]	Like [p] and prepend the line number.  *:s_#*
 
-[l]	Like [p] but print the text like |:list|.
+[l]	Like [p] but print the text like |:list|.  *:s_l*
 
+							*:s_r*
 [r]	Only useful in combination with `:&` or `:s` without arguments.  `:&r`
 	works the same way as `:~`:  When the search pattern is empty, use the
 	previously used search pattern instead of the search pattern from the
@@ -844,7 +858,7 @@ the |substitute()| function with the following exceptions:
   - magic is always set without regard to 'magic'.
   - A ~ inserts a tilde literally.
   - <CR> and \r inserts a carriage-return (CTRL-M).
-  - \<CR> does not have a special meaning. it's just one of \x.
+  - \<CR> does not have a special meaning. It's just one of \x.
 
 Examples: >
   :s/a\|b/xxx\0xxx/g		 modifies "a b"	     to "xxxaxxx xxxbxxx"
@@ -930,9 +944,9 @@ When the result is a |List| then the items are joined with separating line
 breaks.  Thus each item becomes a line, except that they can contain line
 breaks themselves.
 
-The whole matched text can be accessed with "submatch(0)".  The text matched
-with the first pair of () with "submatch(1)".  Likewise for further
-sub-matches in ().
+The |submatch()| function can be used to obtain matched text.  The whole
+matched text can be accessed with "submatch(0)".  The text matched with the
+first pair of () with "submatch(1)".  Likewise for further sub-matches in ().
 
 Be careful: The separation character must not appear in the expression!
 Consider using a character like "@" or ":".  There is no problem if the result
@@ -1706,6 +1720,17 @@ j	Where it makes sense, remove a comment leader when joining lines.  For
 		         // in the list ~
 	Becomes:
 		int i;   // the index in the list ~
+p	Don't break lines at single spaces that follow periods.  This is
+	intended to complement 'joinspaces' and |cpo-J|, for prose with
+	sentences separated by two spaces.  For example, with 'textwidth' set
+	to 28: >
+		Surely you're joking, Mr. Feynman!
+<	Becomes: >
+		Surely you're joking,
+		Mr. Feynman!
+<	Instead of: >
+		Surely you're joking, Mr.
+		Feynman!
 
 
 With 't' and 'c' you can specify when Vim performs auto-wrapping:

runtime/doc/channel.txt

@@ -163,6 +163,9 @@ Use |ch_status()| to see if the channel could be opened.
 				The "close_cb" is also considered for this.
 		    "never"	All messages will be kept.
 
+							*channel-noblock*
+"noblock"	Same effect as |job-noblock|.  Only matters for writing.
+
 							*waittime*
 "waittime"	The time to wait for the connection to be made in
 		milliseconds.  A negative number waits forever.
@@ -594,6 +597,17 @@ See |job_setoptions()| and |ch_setoptions()|.
 			Note: when writing to a file or buffer and when
 			reading from a buffer NL mode is used by default.
 
+						*job-noblock*
+"noblock": 1		When writing use a non-blocking write call.  This
+			avoids getting stuck if Vim should handle other
+			messages in between, e.g. when a job sends back data
+			to Vim.  It implies that when `ch_sendraw()` returns
+			not all data may have been written yet.
+			This option was added in patch 8.1.0350, test with: >
+				if has("patch-8.1.350")
+				  let options['noblock'] = 1
+				endif
+<
 						*job-callback*
 "callback": handler	Callback for something to read on any part of the
 			channel.

runtime/doc/cmdline.txt

@@ -534,8 +534,45 @@ after a command causes the rest of the line to be ignored.  This can be used
 to add comments.  Example: >
 	:set ai		"set 'autoindent' option
 It is not possible to add a comment to a shell command ":!cmd" or to the
-":map" command and a few others, because they see the '"' as part of their
-argument.  This is mentioned where the command is explained.
+":map" command and a few others (mainly commands that expect expressions)
+that see the '"' as part of their argument:
+
+    :argdo
+    :autocmd
+    :bufdo
+    :cexpr (and the like)
+    :cdo (and the like)
+    :command
+    :cscope (and the like)
+    :debug
+    :display
+    :echo (and the like)
+    :elseif
+    :execute
+    :folddoopen
+    :folddoclosed
+    :for
+    :grep (and the like)
+    :help (and the like)
+    :if
+    :let
+    :make
+    :map (and the like including :abbrev commands)
+    :menu (and the like)
+    :mkspell
+    :normal
+    :ownsyntax
+    :popup
+    :promptfind (and the like)
+    :registers
+    :return
+    :sort
+    :syntax
+    :tabdo
+    :tearoff
+    :vimgrep (and the like)
+    :while
+    :windo
 
 							*:bar* *:\bar*
 '|' can be used to separate commands, so you can give multiple commands in one
@@ -832,11 +869,12 @@ it, no matter how many backslashes.
 	   \\#			\#
 Also see |`=|.
 
-			       *:<cword>* *:<cWORD>* *:<cfile>* *<cfile>*
-			       *:<sfile>* *<sfile>* *:<afile>* *<afile>*
-			       *:<abuf>* *<abuf>* *:<amatch>* *<amatch>*
-			       *:<cexpr>* *<cexpr>*
-			       *<slnum>* *E495* *E496* *E497* *E499* *E500*
+			       *:<cword>* *<cword>* *:<cWORD>* *<cWORD>*
+			       *:<cexpr>* *<cexpr>* *:<cfile>* *<cfile>*
+			       *:<afile>* *<afile>* *:<abuf>* *<abuf>*
+			       *:<amatch>* *<amatch>*
+			       *:<sfile>* *<sfile>* *:<slnum>* *<slnum>*
+			       *:<sflnum>* *<sflnum>* *E499* *E500*
 Note: these are typed literally, they are not special keys!
 	<cword>    is replaced with the word under the cursor (like |star|)
 	<cWORD>    is replaced with the WORD under the cursor (see |WORD|)
@@ -849,15 +887,16 @@ Note: these are typed literally, they are not special keys!
 		   |gf| uses)
 	<afile>    When executing autocommands, is replaced with the file name
 		   of the buffer being manipulated, or the file for a read or
-		   write.
+		   write.  *E495*
 	<abuf>     When executing autocommands, is replaced with the currently
 		   effective buffer number (for ":r file" and ":so file" it is
 		   the current buffer, the file being read/sourced is not in a
-		   buffer).
+		   buffer).  *E496*
 	<amatch>   When executing autocommands, is replaced with the match for
-		   which this autocommand was executed.  It differs from
-		   <afile> only when the file name isn't used to match with
-		   (for FileType, Syntax and SpellFileMissing events).
+		   which this autocommand was executed.  *E497*
+		   It differs from <afile> only when the file name isn't used
+		   to match with (for FileType, Syntax and SpellFileMissing
+		   events).
 	<sfile>    When executing a ":source" command, is replaced with the
 		   file name of the sourced file.  *E498*
 		   When executing a function, is replaced with:
@@ -870,6 +909,9 @@ Note: these are typed literally, they are not special keys!
 		   line number.  *E842*
 		   When executing a function it's the line number relative to
 		   the start of the function.
+	<sflnum>   When executing a script, is replaced with the line number.
+		   It differs from <slnum> in that <sflnum> is replaced with
+		   the script line number in any situation.  *E961*
 
 							 *filename-modifiers*
 *:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs* *::S*

runtime/doc/develop.txt

@@ -1,4 +1,4 @@
-*develop.txt*   For Vim version 8.1.  Last change: 2018 May 02
+*develop.txt*   For Vim version 8.1.  Last change: 2019 Feb 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -355,6 +355,24 @@ OK:	    if (cond)
                cmd;
 	    }
 
+When a block has one line the braces can be left out.  When an if/else has
+braces on one block, it usually looks better when the other block also has
+braces:
+OK:	    if (cond)
+	       cmd;
+	    else
+               cmd;
+
+OK:	    if (cond)
+	    {
+	       cmd;
+	    }
+	    else
+	    {
+               cmd;
+               cmd;
+	    }
+
 Use ANSI (new style) function declarations with the return type on a separate
 indented line.
 
@@ -367,10 +385,10 @@ OK:	/*
 	 */
 	    int
 	function_name(
-	    int		arg1,		/* short comment about arg1 */
-	    int		arg2)		/* short comment about arg2 */
+	    int		arg1,		// short comment about arg1
+	    int		arg2)		// short comment about arg2
 	{
-	    int		local;		/* comment about local */
+	    int		local;		// comment about local
 
 	    local = arg1 * arg2;
 

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 8.1.  Last change: 2017 Oct 03
+*diff.txt*      For Vim version 8.1.  Last change: 2019 Feb 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -39,7 +39,9 @@ The second and following arguments may also be a directory name.  Vim will
 then append the file name of the first argument to the directory name to find
 the file.
 
-This only works when a standard "diff" command is available.  See 'diffexpr'.
+By default an internal diff library will be used.  When 'diffopt' or
+'diffexpr' has been set an external "diff" command will be used.  This only
+works when such a diff program is available.
 
 Diffs are local to the current tab page |tab-page|.  You can't see diffs with
 a window in another tab page.  This does make it possible to have several
@@ -177,8 +179,8 @@ loaded.  Since Vim doesn't allow having two buffers for the same file, you
 need another buffer.  This command is useful: >
 	 command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_
 	 	\ | diffthis | wincmd p | diffthis
-(this is in |vimrc_example.vim|).  Use ":DiffOrig" to see the differences
-between the current buffer and the file it was loaded from.
+(this is in |defaults.vim|).  Use ":DiffOrig" to see the differences between
+the current buffer and the file it was loaded from.
 
 A buffer that is unloaded cannot be used for the diff.  But it does work for
 hidden buffers.  You can use ":hide" to close a window without unloading the
@@ -344,8 +346,9 @@ between file1 and file2: >
 
 The ">" is replaced with the value of 'shellredir'.
 
-The output of "diff" must be a normal "ed" style diff.  Do NOT use a context
-diff.  This example explains the format that Vim expects: >
+The output of "diff" must be a normal "ed" style diff or a unified diff.  Do
+NOT use a context diff.  This example explains the format that Vim expects for
+the "ed" style diff: >
 
 	1a2
 	> bbb

runtime/doc/digraph.txt

@@ -1,4 +1,4 @@
-*digraph.txt*   For Vim version 8.1.  Last change: 2016 Nov 04
+*digraph.txt*   For Vim version 8.1.  Last change: 2019 Feb 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -24,7 +24,9 @@ An alternative is using the 'keymap' option.
 1. Defining digraphs					*digraphs-define*
 
 						*:dig* *:digraphs*
-:dig[raphs]		show currently defined digraphs.
+:dig[raphs][!]		Show currently defined digraphs.
+			With [!] headers are used to make it a bit easier to
+			find a specific character.
 							*E104* *E39*
 :dig[raphs] {char1}{char2} {number} ...
 			Add digraph {char1}{char2} to the list.  {number} is
@@ -57,18 +59,9 @@ conversion to be available, it might fail.  For the NUL character you will see
 "10".  That's because NUL characters are internally represented with a NL
 character.  When you write the file it will become a NUL character.
 
-When Vim was compiled without the |+multi_byte| feature, you need to specify
-the character in the encoding given with 'encoding'.  You might want to use
-something like this: >
-
-	if has("multi_byte")
+Example: >
 	digraph oe 339
-	elseif &encoding == "iso-8859-15"
-		digraph oe 189
-	endif
-
-This defines the "oe" digraph for a character that is number 339 in Unicode
-and 189 in latin9 (iso-8859-15).
+This defines the "oe" digraph for a character that is number 339 in Unicode.
 
 ==============================================================================
 2. Using digraphs					*digraphs-use*
@@ -111,11 +104,14 @@ this, you will have to type <BS> e again.  To avoid this don't set the
 
 You may have problems using Vim with characters which have a value above 128.
 For example: You insert ue (u-umlaut) and the editor echoes \334 in Insert
-mode.  After leaving the Insert mode everything is fine.  Note that fmt
-removes all characters with a value above 128 from the text being formatted.
-On some Unix systems this means you have to define the environment-variable
-LC_CTYPE.  If you are using csh, then put the following line in your .cshrc: >
-	setenv LC_CTYPE iso_8859_1
+mode.  After leaving the Insert mode everything is fine.  On some Unix systems
+this means you have to define the environment-variable LC_CTYPE.  If you are
+using csh, then put the following line in your .cshrc: >
+	setenv LC_CTYPE en_US.utf8
+(or similar for a different language or country). The value must be a valid
+locale on your system, i.e. on Unix-like systems it must be present in the
+output of >
+	locale -a
 
 ==============================================================================
 3. Default digraphs					*digraphs-default*
@@ -159,8 +155,7 @@ a standard meaning:
 Example: a: is ä  and o: is ö
 
 These are the RFC1345 digraphs for the one-byte characters.  See the output of
-":digraphs" for the others.  The characters above 255 are only available when
-Vim was compiled with the |+multi_byte| feature.
+":digraphs" for the others.
 
 EURO
 

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.1.  Last change: 2018 Mar 29
+*editing.txt*   For Vim version 8.1.  Last change: 2018 Dec 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1415,7 +1415,7 @@ cannot be read without the right key.
 The text in the swap file and the undo file is also encrypted.  *E843*
 However, this is done block-by-block and may reduce the time needed to crack a
 password.  You can disable the swap file, but then a crash will cause you to
-lose your work.  The undo file can be disabled without much disadvantage. >
+lose your work.  The undo file can be disabled without too much disadvantage. >
 	:set noundofile
 	:noswapfile edit secrets
 

runtime/doc/farsi.txt

@@ -1,4 +1,4 @@
-*farsi.txt*     For Vim version 8.1.  Last change: 2015 Aug 29
+*farsi.txt*     For Vim version 8.1.  Last change: 2019 Feb 16
 
 
 		  VIM REFERENCE MANUAL    by Mortaza Ghassab Shiran
@@ -9,261 +9,12 @@ Right to Left and Farsi Mapping for Vim		*farsi* *Farsi*
 {Vi does not have any of these commands}
 
 						*E27*
-In order to use right-to-left and Farsi mapping support, it is necessary to
-compile Vim with the |+farsi| feature.
+Farsi support has been removed in patch 8.1.0932.  At that time it was
+outdated and unused.
 
-These functions have been made by Mortaza G. Shiran <shiran@jps.net>
+If you would like to bring Farsi support back, please have a look at the old
+Farsi code, as it was present at the 8.1 release.  It should be merged with
+Arabic support using the Unicode character set.
 
 
-Introduction
-------------
-In right-to-left oriented files the characters appear on the screen from right
-to left.  This kind of file is most useful when writing Farsi documents,
-composing faxes or writing Farsi memos.
-
-The commands, prompts and help files are not in Farsi, therefore the user
-interface remains the standard Vi interface.
-
-
-Highlights
-----------
-o  Editing left-to-right files as in the original Vim, no change.
-
-o  Viewing and editing files in right-to-left windows.   File orientation is
-   per window, so it is possible to view the same file in right-to-left and
-   left-to-right modes, simultaneously.
-
-o  Compatibility to the original Vim.   Almost all features work in
-   right-to-left mode (see bugs below).
-
-o  Changing keyboard mapping and reverse insert modes using a single
-   command.
-
-o  Backing from reverse insert mode to the correct place in the file
-   (if possible).
-
-o  While in Farsi mode, numbers are entered from left to right.  Upon entering
-   a none number character, that character will be inserted just into the
-   left of the last number.
-
-o  No special terminal with right-to-left capabilities is required.  The
-   right-to-left changes are completely hardware independent.  Only
-   Farsi font is necessary.
-
-o  Farsi keymapping on the command line in reverse insert mode.
-
-o  Toggling between left-to-right and right-to-left via F8 function key.
-
-o  Toggling between Farsi ISIR-3342 standard encoding and Vim Farsi via F9
-   function key.  Since this makes sense only for the text written in
-   right-to-left mode, this function is also supported only in right-to-left
-   mode.
-
-Farsi Fonts					*farsi-fonts*
------------
-
-The following files are found in the subdirectories of the '$VIM/farsi/fonts'
-directory:
-
-   +  far-a01.pcf    X Windows fonts for Unix including Linux systems
-   +  far-a01.bf     X Windows fonts for SunOS
-   +  far-a01.f16    a screen fonts for Unix including Linux systems
-   +  far-a01.fon    a monospaced fonts for Windows NT/95/98
-   +  far-a01.com    a screen fonts for DOS
-
-
-Font Installation
------------------
-
-o  Installation of fonts for MS Window systems (NT/95/98)
-
-   From 'Control Panel' folder, start the 'Fonts' program.  Then from 'file'
-   menu item select 'Install New Fonts ...'.  Browse and select the
-   'far-a01.fon', then follow the installation guide.
-   NOTE: several people have reported that this does not work.  The solution
-   is unknown.
-
-o  Installation of fonts for X Window systems (Unix/Linux)
-
-   Depending on your system, copy far-a01.pcf.Z or far-a01.pcf.gz into a
-   directory of your choice.  Change to the directory containing the Farsi
-   fonts and execute the following commands:
-
-   >  mkfontdir
-   >  xset +fp path_name_of_farsi_fonts_directory
-
-o  Installation of fonts for X Window systems (SunOS)
-
-   Copy far-a01.bf font into a directory of your choice.
-   Change to the directory containing the far-a01.fb fonts and
-   execute the following commands:
-
-   >  fldfamily
-   >  xset +fp path_name_of_fonts_directory
-
-o  Installation of ASCII screen fonts (Unix/Linux)
-
-   For Linux system, copy the far-a01.f16 fonts into /usr/lib/kbd/consolefonts
-   directory and execute the setfont program as "setfont far-a01.f16".  For
-   other systems (e.g. SCO Unix), please refer to the fonts installation
-   section of your system administration manuals.
-
-o  Installation of ASCII screen fonts (DOS)
-
-   After system power on, prior to the first use of Vim, upload the Farsi
-   fonts by executing the far-a01.com font uploading program.
-
-
-Usage
------
-Prior to starting Vim, the environment in which Vim can run in Farsi mode,
-must be set.  In addition to installation of Farsi fonts, following points
-refer to some of the system environments, which you may need to set:
-Key code mapping, loading graphic card in ASCII screen mode, setting the IO
-driver in 8 bit clean mode ... .
-
-o  Setting the Farsi fonts
-
-   +  For Vim GUI set the 'guifont' to far-a01.  This is done by entering
-      ':set guifont=far-a01' in the Vim window.
-
-      You can have 'guifont' set to far-a01 by Vim during the Vim startup
-      by appending the ':set guifont=far-a01' into your .vimrc file
-      (in case of NT/95/98 platforms _vimrc).
-
-      Under the X Window environment, you can also start Vim with the
-      '-fn far-a01' option.
-
-   +  For Vim within a xterm, start a xterm with the Farsi fonts (e.g.
-      kterm -fn far-a01).  Then start Vim inside the kterm.
-
-   +  For Vim under DOS, prior to the first usage of Vim, upload the Farsi
-      fonts by executing the far-a01.com fonts uploading program.
-
-o  Farsi Keymapping Activation
-
-   To activate the Farsi keymapping, set either 'altkeymap' or 'fkmap'.
-   This is done by entering ':set akm' or ':set fk' in the Vim window.
-   You can have 'altkeymap' or 'fkmap' set as default by appending ':set akm'
-   or ':set fk' in your .vimrc file or _vimrc in case of NT/95/98 platforms.
-
-   To turn off the Farsi keymapping as a default second language keymapping,
-   reset the 'altkeymap' by entering ':set noakm'.
-
-o  right-to-left Farsi Mode
-
-   By default Vim starts in Left-to-right mode.  Following are ways to change
-   the window orientation:
-
-   + Start Vim with the -F option (e.g. vim -F ...).
-
-   + Use the F8 function key to toggle between left-to-right and right-to-left.
-
-   + While in Left-to-right mode, enter 'set rl' in the command line ('rl' is
-     the abbreviation for rightleft).
-
-   + Put the 'set rl' line in your '.vimrc' file to start Vim in
-     right-to-left mode permanently.
-
-Encoding
---------
-
-The letter encoding used is the Vim extended ISIR-3342 standard with a built
-in function to convert between Vim extended ISIR-3342 and ISIR-3342 standard.
-
-For document portability reasons, the letter encoding is kept the same across
-different platforms (i.e. UNIX's, NT/95/98, MS DOS, ...).
-
-
-o  Keyboard
-
-   +  CTRL-_ in insert/replace modes toggles between Farsi(akm)/Latin
-      mode as follows:
-
-   +  CTRL-_ moves the cursor to the end of the typed text in edit mode.
-
-   +  CTRL-_ in command mode only toggles keyboard mapping between Farsi(akm)/
-      Latin.  The Farsi text is then entered in reverse insert mode.
-
-   +  F8 - Toggles between left-to-right and right-to-left.
-
-   +  F9 - Toggles the encoding between ISIR-3342 standard and Vim extended
-      ISIR-3342 (supported only in right-to-left mode).
-
-   +  Keyboard mapping is based on the Iranian ISIRI-2901 standard.
-      Following table shows the keyboard mapping while Farsi(akm) mode set:
-
-	-------------------------------------
-	`  1  2  3  4  5  6  7  8  9  0  -  =
-	<09>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>
-	-------------------------------------
-	~  !  @  #  $  %  ^  &  *  (  )  _  +
-	~  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>
-	-------------------------------------
-	q  w  e  r  t  z  u  i  o  p  [  ]
-	<09>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>
-	-------------------------------------
-	Q  W  E  R  T  Z  U  I  O  P  {  }
-	<09>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  [  ]  {  }
-	-------------------------------------
-	a  s  d  f  g  h  j  k  l  ;  '  \
-	<09>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>
-	-------------------------------------
-	A  S  D  F  G  H  J  K  L  :  "  |
-	<09>  <20><> <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>
-	-------------------------------------
-	<  y  x  c  v  b  n  m  ,  .  /
-	<09>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>
-	-------------------------------------
-	>  Y  X  C  V  B  N  M  <  >  ?
-	<09>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>  <20>
-	-------------------------------------
-
-Note:
-	<09>  stands for Farsi PSP (break without space)
-
-	<09>  stands for Farsi PCN (for HAMZE attribute)
-
-Restrictions
-------------
-
-o  In insert/replace mode and fkmap (Farsi mode) set, CTRL-B is not
-   supported.
-
-o  If you change the character mapping between Latin/Farsi, the redo buffer
-   will be reset (emptied).  That is, redo is valid and will function (using
-   '.') only within the mode you are in.
-
-o  While numbers are entered in Farsi mode, the redo buffer will be reset
-   (emptied).  That is, you cannot redo the last changes (using '.') after
-   entering numbers.
-
-o  While in left-to-right mode and Farsi mode set, CTRL-R is not supported.
-
-o  While in right-to-left mode, the search on 'Latin' pattern does not work,
-   except if you enter the Latin search pattern in reverse.
-
-o  In command mode there is no support for entering numbers from left
-   to right and also for the sake of flexibility the keymapping logic is
-   restricted.
-
-o  Under the X Window environment, if you want to run Vim within a xterm
-   terminal emulator and Farsi mode set, you need to have an ANSI compatible
-   xterm terminal emulator.  This is because the letter codes above 128 decimal
-   have certain meanings in the standard xterm terminal emulator.
-
-   Note: Under X Window environment, Vim GUI works fine in Farsi mode.
-	 This eliminates the need of any xterm terminal emulator.
-
-
-Bugs
-----
-While in insert/replace and Farsi mode set, if you repeatedly change the
-cursor position (via cursor movement) and enter new text and then try to undo
-the last change, the undo will lag one change behind.  But as you continue to
-undo, you will reach the original line of text.  You can also use U to undo all
-changes made in the current line.
-
-For more information about the bugs refer to rileft.txt.
-
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/filetype.txt

@@ -638,11 +638,40 @@ By default the following options are set, in accordance with PEP8: >
 
 	setlocal expandtab shiftwidth=4 softtabstop=4 tabstop=8
 
-To disable this behaviour, set the following variable in your vimrc: >
+To disable this behavior, set the following variable in your vimrc: >
 
 	let g:python_recommended_style = 0
 
 
+R MARKDOWN						*ft-rmd-plugin*
+
+By default ftplugin/html.vim is not sourced. If you want it sourced, add to
+your |vimrc|: >
+	let rmd_include_html = 1
+
+The 'formatexpr' option is set dynamically with different values for R code
+and for Markdown code. If you prefer that 'formatexpr' is not set, add to your
+|vimrc|: >
+	let rmd_dynamic_comments = 0
+
+
+R RESTRUCTURED TEXT					*ft-rrst-plugin*
+
+The 'formatexpr' option is set dynamically with different values for R code
+and for ReStructured text. If you prefer that 'formatexpr' is not set, add to
+your |vimrc|: >
+	let rrst_dynamic_comments = 0
+
+
+RESTRUCTUREDTEXT					*ft-rst-plugin*
+
+The following formatting setting are optionally available: >
+	setlocal expandtab shiftwidth=3 softtabstop=3 tabstop=8
+
+To enable this behavior, set the following variable in your vimrc: >
+	let g:rst_style = 1
+
+
 RPM SPEC						*ft-spec-plugin*
 
 Since the text for this plugin is rather long it has been put in a separate

runtime/doc/gui.txt

@@ -1,4 +1,4 @@
-*gui.txt*       For Vim version 8.1.  Last change: 2018 Mar 06
+*gui.txt*       For Vim version 8.1.  Last change: 2019 Jan 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -556,6 +556,7 @@ floating menus that do not appear on the main menu bar.
 				*:sme* *:smenu*  *:snoreme* *:snoremenu*
 				*:ime* *:imenu*  *:inoreme* *:inoremenu*
 				*:cme* *:cmenu*  *:cnoreme* *:cnoremenu*
+				*:tlm* *:tlmenu* *:tln*     *:tlnoremenu*
 				*E330* *E327* *E331* *E336* *E333*
 				*E328* *E329* *E337* *E792*
 To create a new menu item, use the ":menu" commands.  They are mostly like
@@ -571,6 +572,10 @@ the mouse button down on this will pop up a menu containing the item
 "Big Changes", which is a sub-menu containing the item "Delete All Spaces",
 which when selected, performs the operation.
 
+To create a menu for terminal mode, use |:tlmenu| instead of |:tmenu| unlike
+key mapping (|:tmap|). This is because |:tmenu| is already used for defining
+tooltips for menus. See |terminal-typing|.
+
 Special characters in a menu name:
 
 	&	The next character is the shortcut key.  Make sure each
@@ -589,9 +594,9 @@ With the shortcut "F" (while keeping the <Alt> key pressed), and then "O",
 this menu can be used.  The second part is shown as "Open     :e".  The ":e"
 is right aligned, and the "O" is underlined, to indicate it is the shortcut.
 
-The ":amenu" command can be used to define menu entries for all modes at once.
-To make the command work correctly, a character is automatically inserted for
-some modes:
+The ":amenu" command can be used to define menu entries for all modes at once,
+except for Terminal mode.  To make the command work correctly, a character is
+automatically inserted for some modes:
 	mode		inserted	appended	~
 	Normal		nothing		nothing
 	Visual		<C-C>		<C-\><C-G>
@@ -865,6 +870,16 @@ be used to complete the name of the menu item.
 				insert-mode menu Eg: >
 	:emenu File.Exit
 
+:[range]em[enu] {mode} {menu}	Like above, but execute the menu for {mode}:
+				    'n': |:nmenu|  Normal mode
+				    'v': |:vmenu|  Visual mode
+				    's': |:smenu|  Select mode
+				    'o': |:omenu|  Operator-pending mode
+				    't': |:tlmenu| Terminal mode
+				    'i': |:imenu|  Insert mode
+				    'c': |:cmenu|  Cmdline mode
+
+
 If the console-mode vim has been compiled with WANT_MENU defined, you can
 use :emenu to access useful menu items you may have got used to from GUI
 mode.  See 'wildmenu' for an option that works well with this.  See
@@ -885,6 +900,7 @@ using the last visual selection.
 						*:sunme* *:sunmenu*
 						*:iunme* *:iunmenu*
 						*:cunme* *:cunmenu*
+						*:tlu*   *:tlunmenu*
 To delete a menu item or a whole submenu, use the unmenu commands, which are
 analogous to the unmap commands.  Eg: >
     :unmenu! Edit.Paste
@@ -898,7 +914,9 @@ may be used to complete the name of the menu item for the appropriate mode.
 To remove all menus use:			*:unmenu-all*  >
 	:unmenu *	" remove all menus in Normal and visual mode
 	:unmenu! *	" remove all menus in Insert and Command-line mode
-	:aunmenu *	" remove all menus in all modes
+	:aunmenu *	" remove all menus in all modes, except for Terminal
+			" mode
+	:tlunmenu *	" remove all menus in Terminal mode
 
 If you want to get rid of the menu bar: >
 	:set guioptions-=m
@@ -951,6 +969,8 @@ See section |42.4| in the user manual.
 :tu[nmenu] {menupath}		Remove a tip for a menu or tool.
 				{only in X11 and Win32 GUI}
 
+Note: To create menus for terminal mode, use |:tlmenu| instead.
+
 When a tip is defined for a menu item, it appears in the command-line area
 when the mouse is over that item, much like a standard Windows menu hint in
 the status bar.  (Except when Vim is in Command-line mode, when of course

runtime/doc/gui_x11.txt

@@ -376,8 +376,8 @@ you might have to use the file ~/.gtkrc-2.0 instead, depending on your
 distribution.
 
 For GTK+ 3, an effect similar to the above can be obtained by adding the
-following snippet of CSS code to $XDG_HOME_DIR/gtk-3.0/gtk.css (usually,
-$HOME/.config/gtk-3.0/gtk.css):
+following snippet of CSS code to $XDG_HOME_DIR/gtk-3.0/gtk.css (see the next
+section):
 
 For GTK+ 3 < 3.20: >
 
@@ -408,6 +408,10 @@ stable support for GTK+ CSS:
 GTK+ uses CSS for styling and layout of widgets.  In this subsection, we'll
 have a quick look at GTK+ CSS through simple, illustrative examples.
 
+You can usually edit the config with: >
+	vim $HOME/.config/gtk-3.0/gtk.css
+
+
 Example 1.  Empty Space Adjustment ~
 
 By default, the toolbar and the tabline of the GTK+ 3 GUI are somewhat larger
@@ -492,6 +496,16 @@ unexpectedly less attractive or even deteriorates their usability.  Keep this
 in mind always when you try improving a theme.
 
 
+Example 3.  border color ~
+
+To eliminate borders when maximized: >
+
+    @define-color bg_color #1B2B34;
+    #vim-main-window {
+	background-color: @bg_color;
+    }
+
+
 Using Vim as a GTK+ plugin ~
 							*gui-gtk-socketid*
 When the GTK+ version of Vim starts up normally, it creates its own top level

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 8.1.  Last change: 2017 Oct 28
+*help.txt*	For Vim version 8.1.  Last change: 2019 Jan 17
 
 			VIM - main help file
 									 k
@@ -10,7 +10,7 @@ Close this window:  Use ":q<Enter>".
 Jump to a subject:  Position the cursor on a tag (e.g. |bars|) and hit CTRL-].
    With the mouse:  ":set mouse=a" to enable the mouse (in xterm or GUI).
 		    Double-click the left mouse button on a tag, e.g. |bars|.
-	Jump back:  Type CTRL-T or CTRL-O.  Repeat to go further back.
+	Jump back:  Type CTRL-O.  Repeat to go further back.
 
 Get specific help:  It is possible to go directly to whatever you want help
 		    on, by giving an argument to the |:help| command.
@@ -31,13 +31,17 @@ Get specific help:  It is possible to go directly to whatever you want help
 		    help entries for "word".
 		    Or use ":helpgrep word". |:helpgrep|
 
+  Getting started:  Do the Vim tutor, a 20 minute interactive training for the
+		    basic commands, see |vimtutor|.
+		    Read the user manual from start to end: |usr_01.txt|
+
 Vim stands for Vi IMproved.  Most of Vim was made by Bram Moolenaar, but only
 through the help of many others.  See |credits|.
 ------------------------------------------------------------------------------
 						*doc-file-list* *Q_ct*
 BASIC:
 |quickref|	Overview of the most common commands you will use
-|tutor|		30 minutes training course for beginners
+|tutor|		20 minutes training course for beginners
 |copying|	About copyrights
 |iccf|		Helping poor children in Uganda
 |sponsor|	Sponsor Vim development, become a registered Vim user
@@ -113,7 +117,6 @@ Basic editing ~
 |scroll.txt|	scrolling the text in the window
 |insert.txt|	Insert and Replace mode
 |change.txt|	deleting and replacing text
-|indent.txt|	automatic indenting for C and other languages
 |undo.txt|	Undo and Redo
 |repeat.txt|	repeating commands, Vim scripts and debugging
 |visual.txt|	using the Visual mode (selecting a text area)
@@ -126,14 +129,11 @@ Advanced editing ~
 |pattern.txt|	regexp patterns and search commands
 |map.txt|	key mapping and abbreviations
 |tagsrch.txt|	tags and special searches
-|quickfix.txt|	commands for a quick edit-compile-fix cycle
 |windows.txt|	commands for using multiple windows and buffers
 |tabpage.txt|	commands for using multiple tab pages
-|syntax.txt|	syntax highlighting
 |spell.txt|	spell checking
 |diff.txt|	working with two to four versions of the same file
 |autocmd.txt|	automatically executing commands on an event
-|filetype.txt|	settings done specifically for a type of file
 |eval.txt|	expression evaluation, conditional commands
 |channel.txt|	Jobs, Channels, inter-process communication
 |fold.txt|	hide (fold) ranges of lines
@@ -143,18 +143,27 @@ Special issues ~
 |remote.txt|	using Vim as a server or client
 |term.txt|	using different terminals and mice
 |terminal.txt|	Terminal window support
+
+Programming language support ~
+|indent.txt|	automatic indenting for C and other languages
+|syntax.txt|	syntax highlighting
+|textprop.txt|	Attaching properties to text for highlighting or other
+|filetype.txt|	settings done specifically for a type of file
+|quickfix.txt|	commands for a quick edit-compile-fix cycle
+|ft_ada.txt|	Ada (the programming language) support
+|ft_rust.txt|	Filetype plugin for Rust
+|ft_sql.txt|	about the SQL filetype plugin
+
+Language support ~
 |digraph.txt|	list of available digraphs
 |mbyte.txt|	multi-byte text support
 |mlang.txt|	non-English language support
+|rileft.txt|	right-to-left editing mode
 |arabic.txt|	Arabic language support and editing
 |farsi.txt|	Farsi (Persian) editing
 |hebrew.txt|	Hebrew language support and editing
 |russian.txt|	Russian language support and editing
-|ft_ada.txt|	Ada (the programming language) support
-|ft_rust.txt|	Filetype plugin for Rust
-|ft_sql.txt|	about the SQL filetype plugin
 |hangulin.txt|	Hangul (Korean) input mode
-|rileft.txt|	right-to-left editing mode
 
 GUI ~
 |gui.txt|	Graphical User Interface (GUI)
@@ -171,7 +180,6 @@ Interfaces ~
 |if_ole.txt|	OLE automation interface for Win32
 |if_ruby.txt|	Ruby interface
 |debugger.txt|	Interface with a debugger
-|workshop.txt|	Sun Visual Workshop interface
 |netbeans.txt|	NetBeans External Editor interface
 |sign.txt|	debugging signs
 
@@ -225,4 +233,4 @@ will try to find help for it.  Especially for options in single quotes, e.g.
 'compatible'.
 
 ------------------------------------------------------------------------------
- vim:tw=78:fo=tcq2:isk=!-~,^*,^\|,^\":ts=8:noet:ft=help:norl:
+ vim:tw=78:isk=!-~,^*,^\|,^\":ts=8:noet:ft=help:norl:

runtime/doc/if_perl.txt

@@ -1,4 +1,4 @@
-*if_perl.txt*   For Vim version 8.1.  Last change: 2017 Nov 24
+*if_perl.txt*   For Vim version 8.1.  Last change: 2019 Jan 29
 
 
 		  VIM REFERENCE MANUAL    by Sven Verdoolaege
@@ -45,8 +45,8 @@ The Perl patches for Vim were made by:
 	Matt Gerassimof
 
 Perl for MS-Windows (and other platforms) can be found at:
-http://www.perl.org/ The ActiveState one should work, Strawberry Perl is a
-good alternative.
+	http://www.perl.org/
+The ActiveState one should work, Strawberry Perl is a good alternative.
 
 ==============================================================================
 3. Using the Perl interface				*perl-using*
@@ -191,6 +191,9 @@ VIM::Eval({expr})	Evaluates {expr} and returns (success, value) in list
 			A |List| is turned into a string by joining the items
 			and inserting line breaks.
 
+							*perl-Blob*
+VIM::Blob({expr})	Return |Blob| literal string 0zXXXX from scalar value.
+
 							*perl-SetHeight*
 Window->SetHeight({height})
 			Sets the Window height to {height}, within screen

runtime/doc/if_pyth.txt

@@ -60,9 +60,10 @@ Example: >
 	endfunction
 
 To see what version of Python you have: >
-	:python import sys
 	:python print(sys.version)
 
+There is no need to import sys, it's done by default.
+
 Note: Python is very sensitive to the indenting.  Make sure the "class" line
 and "EOF" do not have any indent.
 
@@ -81,6 +82,18 @@ Examples:
 >
 	:pydo return "%s\t%d" % (line[::-1], len(line))
 	:pydo if line: return "%4d: %s" % (linenr, line)
+<
+One can use `:pydo` in possible conjunction with `:py` to filter a range using
+python. For example: >
+
+	:py3 << EOF
+	needle = vim.eval('@a')
+	replacement = vim.eval('@b')
+
+	def py_vim_string_replace(str):
+		return str.replace(needle, replacement)
+	EOF
+	:'<,'>py3do return py_vim_string_replace(line)
 <
 							*:pyfile* *:pyf*
 :[range]pyf[ile] {file}
@@ -98,7 +111,6 @@ Python commands cannot be used in the |sandbox|.
 
 To pass arguments you need to set sys.argv[] explicitly.  Example: >
 
-	:python import sys
 	:python sys.argv = ["foo", "bar"]
 	:pyfile myscript.py
 
@@ -168,11 +180,15 @@ vim.eval(str)						*python-eval*
 	- a dictionary if the Vim expression evaluates to a Vim dictionary
 	Dictionaries and lists are recursively expanded.
 	Examples: >
+	    :" value of the 'textwidth' option
 	    :py text_width = vim.eval("&tw")
-	    :py str = vim.eval("12+12")		# NB result is a string! Use
-						# string.atoi() to convert to
-						# a number.
-
+	    :
+	    :" contents of the 'a' register
+	    :py a_reg = vim.eval("@a") 
+	    :
+	    :" Result is a string! Use string.atoi() to convert to a number.
+	    :py str = vim.eval("12+12")
+	    :
 	    :py tagList = vim.eval('taglist("eval_expr")')
 <	The latter will return a python list of python dicts, for instance:
 	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name': ~

runtime/doc/if_ruby.txt

@@ -1,4 +1,4 @@
-*if_ruby.txt*   For Vim version 8.1.  Last change: 2018 Mar 15
+*if_ruby.txt*   For Vim version 8.1.  Last change: 2019 Jan 29
 
 
 		  VIM REFERENCE MANUAL    by Shugo Maeda
@@ -110,6 +110,10 @@ Module Functions:
 Vim::message({msg})
 	Displays the message {msg}.
 
+							*ruby-blob*
+Vim::blob({arg})
+	Return |Blob| literal string from {arg}.
+
 							*ruby-set_option*
 Vim::set_option({arg})
 	Sets a vim option.  {arg} can be any argument that the ":set" command

runtime/doc/indent.txt

@@ -1,4 +1,4 @@
-*indent.txt*    For Vim version 8.1.  Last change: 2018 Apr 04
+*indent.txt*    For Vim version 8.1.  Last change: 2019 Feb 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -60,12 +60,13 @@ typing certain characters or commands in certain contexts.  Note that this not
 only triggers C-indenting.  When 'indentexpr' is not empty 'indentkeys' is
 used instead.  The format of 'cinkeys' and 'indentkeys' is equal.
 
-The default is "0{,0},0),:,0#,!^F,o,O,e" which specifies that indenting occurs
-as follows:
+The default is "0{,0},0),0],:,0#,!^F,o,O,e" which specifies that indenting
+occurs as follows:
 
 	"0{"	if you type '{' as the first character in a line
 	"0}"	if you type '}' as the first character in a line
 	"0)"	if you type ')' as the first character in a line
+	"0]"	if you type ']' as the first character in a line
 	":"	if you type ':' after a label or case statement
 	"0#"	if you type '#' as the first character in a line
 	"!^F"	if you type CTRL-F (which is not inserted)
@@ -588,8 +589,9 @@ The basics for using flexible indenting are explained in section |30.3| of the
 user manual.
 
 If you want to write your own indent file, it must set the 'indentexpr'
-option.  Setting the 'indentkeys' option is often useful.  See the
-$VIMRUNTIME/indent directory for examples.
+option.  Setting the 'indentkeys' option is often useful.
+See the $VIMRUNTIME/indent/README.txt file for hints.
+See the $VIMRUNTIME/indent directory for examples.
 
 
 REMARKS ABOUT SPECIFIC INDENT FILES ~
@@ -602,14 +604,14 @@ the use of square and curly brackets, and otherwise by community convention.
 These conventions are not universally followed, so the Clojure indent script
 offers a few configurable options, listed below.
 
-If the current vim does not include searchpairpos(), the indent script falls
+If the current vim does not include |searchpairpos()|, the indent script falls
 back to normal 'lisp' indenting, and the following options are ignored.
 
 							*g:clojure_maxlines*
 
-Set maximum scan distance of searchpairpos(). Larger values trade performance
-for correctness when dealing with very long forms. A value of 0 will scan
-without limits.
+Set maximum scan distance of |searchpairpos()|. Larger values trade
+performance for correctness when dealing with very long forms. A value of 0
+will scan without limits.
 >
 	" Default
 	let g:clojure_maxlines = 100
@@ -935,11 +937,21 @@ given are the defaults.  Note that the variables are set to an expression, so
 that you can change the value of 'shiftwidth' later.
 
 Indent after an open paren: >
-	let g:pyindent_open_paren = '&sw * 2'
+	let g:pyindent_open_paren = 'shiftwidth() * 2'
 Indent after a nested paren: >
-	let g:pyindent_nested_paren = '&sw'
+	let g:pyindent_nested_paren = 'shiftwidth()'
 Indent for a continuation line: >
-	let g:pyindent_continue = '&sw * 2'
+	let g:pyindent_continue = 'shiftwidth() * 2'
+
+The method uses |searchpair()| to look back for unclosed parenthesis.  This
+can sometimes be slow, thus it timeouts after 150 msec.  If you notice the
+indenting isn't correct, you can set a larger timeout in msec: >
+	let g:pyindent_searchpair_timeout = 500
+
+If looking back for unclosed parenthesis is still too slow, especially during
+a copy-paste operation, or if you don't need indenting inside multi-line
+parentheses, you can completely disable this feature: >
+	let g:pyindent_disable_parentheses_indenting = 1
 
 
 R								*ft-r-indent*
@@ -978,6 +990,11 @@ Below is an example of indentation with and without this option enabled:
        paste(x)                                      paste(x)
    }                                             }
 <
+The code will be indented after lines that match the pattern
+`'\(&\||\|+\|-\|\*\|/\|=\|\~\|%\|->\)\s*$'`. If you want indentation after
+lines that match a different pattern, you should set the appropriate value of
+`r_indent_op_pattern` in your |vimrc|.
+
 
 SHELL							*ft-sh-indent*
 
@@ -1028,7 +1045,7 @@ Furthermore, setting the variable b:verilog_indent_width to change the
 indenting width (default is 'shiftwidth'): >
 
   let b:verilog_indent_width = 4
-  let b:verilog_indent_width = &sw * 2
+  let b:verilog_indent_width = shiftwidth() * 2
 
 In addition, you can turn the verbose mode for debug issue: >
 
@@ -1151,7 +1168,7 @@ VIM							*ft-vim-indent*
 For indenting Vim scripts there is one variable that specifies the amount of
 indent for a continuation line, a line that starts with a backslash: >
 
-	:let g:vim_indent_cont = &sw * 3
+	:let g:vim_indent_cont = shiftwidth() * 3
 
 Three times shiftwidth is the default value.
 

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 8.1.  Last change: 2018 Apr 19
+*index.txt*     For Vim version 8.1.  Last change: 2019 Mar 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -17,9 +17,11 @@ to look for deleting something, use: "/delete".
    2.3. Square bracket commands		|[|
    2.4. Commands starting with 'g'	|g|
    2.5. Commands starting with 'z'	|z|
+   2.6. Operator-pending mode		|operator-pending-index|
 3. Visual mode				|visual-index|
 4. Command-line editing			|ex-edit-index|
-5. EX commands				|ex-cmd-index|
+5. Terminal-Job mode			|terminal-job-index|
+6. EX commands				|ex-cmd-index|
 
 For an overview of options see help.txt |option-list|.
 For an overview of built-in functions see |functions|.
@@ -166,6 +168,20 @@ commands in CTRL-X submode				*i_CTRL-X_index*
 |i_CTRL-X_s|		CTRL-X s	spelling suggestions
 {not available when compiled without the |+insert_expand| feature}
 
+commands in completion mode (see |popupmenu-keys|)
+
+|complete_CTRL-E| CTRL-E	stop completion and go back to original text
+|complete_CTRL-Y| CTRL-Y	accept selected match and stop completion
+		CTRL-L		insert one character from the current match
+		<CR>		insert currently selected match
+		<BS>		delete one character and redo search
+		CTRL-H		same as <BS>
+		<Up>		select the previous match
+		<Down>		select the next match
+		<PageUp>	select a match several entries back
+		<PageDown>	select a match several entries forward
+		other		stop completion and insert the typed character
+
 ==============================================================================
 2. Normal mode						*normal-index*
 
@@ -528,10 +544,8 @@ tag		command		   action in Normal mode	~
 |CTRL-W_CTRL-]|	CTRL-W CTRL-]	   same as "CTRL-W ]"
 |CTRL-W_CTRL-^|	CTRL-W CTRL-^	   same as "CTRL-W ^"
 |CTRL-W_CTRL-_|	CTRL-W CTRL-_	   same as "CTRL-W _"
-|CTRL-W_quote|	CTRL-W "	   terminal window: paste register
 |CTRL-W_+|	CTRL-W +	   increase current window height N lines
 |CTRL-W_-|	CTRL-W -	   decrease current window height N lines
-|CTRL-W_.|	CTRL-W .	   terminal window: type CTRL-W
 |CTRL-W_:|	CTRL-W :	   same as |:|, edit a command line
 |CTRL-W_<|	CTRL-W <	   decrease current window width N columns
 |CTRL-W_=|	CTRL-W =	   make all windows the same height & width
@@ -540,7 +554,6 @@ tag		command		   action in Normal mode	~
 |CTRL-W_J|	CTRL-W J	   move current window to the very bottom
 |CTRL-W_K|	CTRL-W K	   move current window to the very top
 |CTRL-W_L|	CTRL-W L	   move current window to the far right
-|CTRL-W_N|	CTRL-W N	   terminal window: go to Terminal Normal mode
 |CTRL-W_P|	CTRL-W P	   go to preview window
 |CTRL-W_R|	CTRL-W R	   rotate windows upwards N times
 |CTRL-W_S|	CTRL-W S	   same as "CTRL-W s"
@@ -570,6 +583,8 @@ tag		command		   action in Normal mode	~
 |CTRL-W_gF|	CTRL-W g F	   edit file name under the cursor in a new
 				   tab page and jump to the line number
 				   following the file name.
+|CTRL-W_gt|	CTRL-W g t	   same as `gt`: go to next tab page
+|CTRL-W_gT|	CTRL-W g T	   same as `gT`: go to previous tab page
 |CTRL-W_h|	CTRL-W h	   go to Nth left window (stop at first window)
 |CTRL-W_i|	CTRL-W i	   split window and jump to declaration of
 				   identifier under the cursor
@@ -854,6 +869,17 @@ tag		char	      note action in Normal mode	~
 |z<Left>|	z<Left>		   same as "zh"
 |z<Right>|	z<Right>	   same as "zl"
 
+==============================================================================
+2.6 Operator-pending mode			*operator-pending-index*
+
+These can be used after an operator, but before a {motion} has been entered.
+
+tag		char		action in Operator-pending mode	~
+-----------------------------------------------------------------------
+|o_v|		v		force operator to work characterwise
+|o_V|		V		force operator to work linewise
+|o_CTRL-V|	CTRL-V		force operator to work blockwise
+
 ==============================================================================
 3. Visual mode						*visual-index*
 
@@ -1066,10 +1092,31 @@ tag		command	      action in Command-line editing mode	~
 |c_<Insert>|	<Insert>	toggle insert/overstrike mode
 |c_<LeftMouse>|	<LeftMouse>	cursor at mouse click
 
+==============================================================================
+5. Terminal-Job mode				*terminal-job-index*
+
+Most Normal mode commands except for window commands (|CTRL-W|) do not work in
+a terminal window. Switch to Terminal-Normal mode to use them.
+This assumes 'termwinkey' is not set.
+
+tag		char		action in Terminal-Job mode	~
+-----------------------------------------------------------------------
+|t_CTRL-\_CTRL-N| CTRL-\ CTRL-N	switch to Terminal-Normal mode
+|t_CTRL-W_N|	CTRL-W N	switch to Terminal-Normal mode
+|t_CTRL-W_:|	CTRL-W :	enter an Ex command
+|t_CTRL-W_.|	CTRL-W .	type CTRL-W in the terminal
+		CTRL-W CTRL-\	send a CTRL-\ to the job in the terminal
+|t_CTRL-W_quote|	CTRL-W " {0-9a-z"%#*:=}
+				paste register in the terminal
+|t_CTRL-W_CTRL-C| CTRL-W CTRL-C	forcefully ends the job
+|t_CTRL-W_CTRL-W| CTRL-W CTRL-W   move focus to the next window
+|t_CTRL-W_gt|	CTRL-W gt	go to next tabpage, same as `gt`
+|t_CTRL-W_gT|	CTRL-W gT	go to previous tabpage, same as `gT`
+
 You found it, Arthur!				*holy-grail* *:smile*
 
 ==============================================================================
-5. EX commands					*ex-cmd-index* *:index*
+6. EX commands					*ex-cmd-index* *:index*
 
 This is a brief but complete listing of all the ":" commands, without
 mentioning any arguments.  The optional part of the command name is inside [].
@@ -1459,6 +1506,7 @@ tag	      command	      action ~
 |:redir|	:redi[r]	redirect messages to a file or register
 |:redraw|	:redr[aw]	  force a redraw of the display
 |:redrawstatus|	:redraws[tatus]	  force a redraw of the status line(s)
+|:redrawtabline|  :redrawt[abline]  force a redraw of the tabline
 |:registers|	:reg[isters]	display the contents of registers
 |:resize|	:res[ize]	change current window height
 |:retab|	:ret[ab]	change tab size
@@ -1583,6 +1631,9 @@ tag	      command	      action ~
 |:tjump|	:tj[ump]	like ":tselect", but jump directly when there
 				is only one match
 |:tlast|	:tl[ast]	jump to last matching tag
+|:tlmenu|	:tlm[enu]	add menu for Terminal-Job mode
+|:tlnoremenu|	:tln[oremenu]	like ":noremenu" but for Terminal-Job mode
+|:tlunmenu|	:tlu[nmenu]	remove menu for Terminal-Job mode
 |:tmapclear|	:tmapc[lear]	remove all mappings for Terminal-Job mode
 |:tmap|		:tma[p]		like ":map" but for Terminal-Job mode
 |:tmenu|	:tm[enu]	define menu tooltip
@@ -1640,7 +1691,6 @@ tag	      command	      action ~
 				argument list
 |:wq|		:wq		write to a file and quit window or Vim
 |:wqall|	:wqa[ll]	write all changed buffers and quit Vim
-|:wsverb|	:ws[verb]	pass the verb to workshop over IPC
 |:wundo|	:wu[ndo]	write undo information to a file
 |:wviminfo|	:wv[iminfo]	write to viminfo file
 |:xit|		:x[it]		write if buffer changed and quit window or Vim

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.1.  Last change: 2018 Feb 10
+*insert.txt*    For Vim version 8.1.  Last change: 2019 Jan 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1051,13 +1051,13 @@ The function must return the column where the completion starts.  It must be a
 number between zero and the cursor column "col('.')".  This involves looking
 at the characters just before the cursor and including those characters that
 could be part of the completed item.  The text between this column and the
-cursor column will be replaced with the matches.
+cursor column will be replaced with the matches.  If the returned value is
+larger than the cursor column, the cursor column is used.
 
-Special return values:
-   -1 If no completion can be done, the completion will be cancelled with an
-      error message.
+Negative return values:
    -2 	To cancel silently and stay in completion mode.
    -3 	To cancel silently and leave completion mode.
+   Another negative value: completion starts at the cursor column
 
 On the second invocation the arguments are:
    a:findstart  0
@@ -1076,6 +1076,11 @@ that contains the List.  The Dict can have these items:
 			The only value currently recognized is "always", the
 			effect is that the function is called whenever the
 			leading text is changed.
+
+If you want to suppress the warning message for an empty result, return
+|v:none|.  This is useful to implement asynchronous completion with
+|complete()|.
+
 Other items are ignored.
 
 For acting upon end of completion, see the |CompleteDone| autocommand event.

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 8.1.  Last change: 2018 Jan 24
+*intro.txt*     For Vim version 8.1.  Last change: 2019 Jan 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -52,29 +52,11 @@ an introduction to the use of Vi or Vim, it gets a bit complicated here and
 there.  For beginners, there is a hands-on |tutor|.  To learn using Vim, read
 the user manual |usr_toc.txt|.
 
-							*book*
-There are many books on Vi that contain a section for beginners.  There are
-two books I can recommend:
-
-	"Vim - Vi Improved" by Steve Oualline
-
-This is the very first book completely dedicated to Vim.  It is very good for
-beginners.  The most often used commands are explained with pictures and
-examples.  The less often used commands are also explained, the more advanced
-features are summarized.  There is a comprehensive index and a quick
-reference.  Parts of this book have been included in the user manual
-|frombook|.
-Published by New Riders Publishing.  ISBN: 0735710015
-For more information try one of these:
-	http://iccf-holland.org/click5.html
-	http://www.vim.org/iccf/click5.html
-
-	"Learning the Vi editor" by Linda Lamb and Arnold Robbins
-
-This is a book about Vi that includes a chapter on Vim (in the sixth edition).
-The first steps in Vi are explained very well.  The commands that Vim adds are
-only briefly mentioned.  There is also a German translation.
-Published by O'Reilly.  ISBN: 1-56592-426-6.
+							*book* *books*
+Most books on Vi and Vim contain a section for beginners.  Others are spending
+more words on specific functionality.  You can find an overview of Vim books
+here:
+	http://iccf-holland.org/vim_books.html
 
 ==============================================================================
 2. Vim on the internet					*internet*
@@ -84,9 +66,9 @@ The Vim pages contain the most recent information about Vim.  They also
 contain links to the most recent version of Vim.  The FAQ is a list of
 Frequently Asked Questions.  Read this if you have problems.
 
-	Vim home page:	  http://www.vim.org/
-	Vim FAQ:	  http://vimdoc.sf.net/
-	Downloading:	  ftp://ftp.vim.org/pub/vim/MIRRORS
+	Vim home page:	  https://www.vim.org/
+	Vim FAQ:	  https://vimhelp.appspot.com/vim_faq.txt.html
+	Downloading:	  https://www.vim.org/download.php
 
 
 Usenet News group where Vim is discussed:		*news* *usenet*
@@ -114,10 +96,12 @@ There are several mailing lists for Vim:
 See http://www.vim.org/maillist.php for the latest information.
 
 NOTE:
+- Anyone can see the archive, e.g. on Google groups.  Search this if you have
+  questions.
 - You can only send messages to these lists if you have subscribed!
+- The first message is moderated, thus it may take a few hours to show up.
 - You need to send the messages from the same location as where you subscribed
   from (to avoid spam mail).
-- Maximum message size is 40000 characters.
 
 						*subscribe-maillist*
 If you want to join, send a message to
@@ -150,7 +134,10 @@ Preferably start Vim with: >
 Where reproduce.vim is a script that reproduces the problem.  Try different
 machines, if relevant (is this an MS-Windows specific bug perhaps?).
 
-Send me patches if you can!
+Send me patches if you can!  If you create a pull request on
+https://github.com/vim/vim then the automated checks will run and report any
+obvious problems.  But you can also send the patch by email (use an attachment
+to avoid white space changes).
 
 It will help to include information about the version of Vim you are using and
 your setup.  You can get the information with this command: >
@@ -189,7 +176,7 @@ introduce Y2K problems, but those are not really part of Vim itself.
 ==============================================================================
 3. Credits				*credits* *author* *Bram* *Moolenaar*
 
-Most of Vim was written by Bram Moolenaar <Bram@vim.org>.
+Most of Vim was created by Bram Moolenaar <Bram@vim.org>.
 
 Parts of the documentation come from several Vi manuals, written by:
 	W.N. Joy
@@ -268,6 +255,7 @@ Vim would never have become what it is now, without the help of these people!
 	Ken Takata		fixes and features
 	Kazunobu Kuriyama	GTK 3
 	Christian Brabandt	many fixes, features, user support, etc.
+	Yegappan Lakshmanan	many quickfix features
 
 I wish to thank all the people that sent me bug reports and suggestions.  The
 list is too long to mention them all here.  Vim would not be the same without
@@ -280,9 +268,9 @@ In this documentation there are several references to other versions of Vi:
 Vi	"the original".  Without further remarks this is the version
 	of Vi that appeared in Sun OS 4.x.  ":version" returns
 	"Version 3.7, 6/7/85".  Sometimes other versions are referred
-	to.  Only runs under Unix.  Source code only available with a
-	license.  More information on Vi can be found through:
-		http://vi-editor.org	[doesn't currently work...]
+	to.  Only runs under Unix.  Source code is now available under a
+	BSD-style license.  More information on Vi can be found through:
+		http://ex-vi.sourceforge.net/
 							*Posix*
 Posix	From the IEEE standard 1003.2, Part 2: Shell and utilities.
 	Generally known as "Posix".  This is a textual description of
@@ -297,9 +285,14 @@ Nvi	The "New" Vi.  The version of Vi that comes with BSD 4.4 and FreeBSD.
 	Source code is freely available.
 							*Elvis*
 Elvis	Another Vi clone, made by Steve Kirkendall.  Very compact but isn't
-	as flexible as Vim.
-	The version used is 2.1.  It is still being developed.  Source code is
-	freely available.
+	as flexible as Vim.  Development has stalled, Elvis has left the
+	building!  Source code is freely available.
+							*Neovim*
+Neovim	A Vim clone.  Forked the Vim source in 2014 and went a different way.
+	Very much bound to github and has many more dependencies, making
+	development more complex and limiting portability.  Code has been
+	refactored, resulting in patches not being exchangeable with Vim.
+	Supports a remote GUI and integration with scripting languages.
 
 ==============================================================================
 4. Notation						*notation*

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.1.  Last change: 2018 May 13
+*map.txt*       For Vim version 8.1.  Last change: 2018 Dec 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -371,8 +371,9 @@ job running in the terminal.  See |terminal-typing|.
 
 							*omap-info*
 Operator-pending mappings can be used to define a movement command that can be
-used with any operator.  Simple example: ":omap { w" makes "y{" work like "yw"
-and "d{" like "dw".
+used with any operator.  Simple example: >
+	:omap { w
+makes "y{" work like "yw" and "d{" like "dw".
 
 To ignore the starting cursor position and select different text, you can have
 the omap start Visual mode to select the text to be operated upon.  Example
@@ -383,9 +384,11 @@ Normal mode commands find the first '(' character and select the first word
 before it.  That usually is the function name.
 
 To enter a mapping for Normal and Visual mode, but not Operator-pending mode,
-first define it for all three modes, then unmap it for Operator-pending mode:
+first define it for all three modes, then unmap it for
+Operator-pending mode: >
 	:map    xx something-difficult
 	:ounmap xx
+
 Likewise for a mapping for Visual and Operator-pending mode or Normal and
 Operator-pending mode.
 
@@ -1220,6 +1223,10 @@ See |:verbose-cmd| for more information.
 			attributes (see below) are {attr}.  If the command
 			already exists, an error is reported, unless a ! is
 			specified, in which case the command is redefined.
+			There is one exception: When sourcing a script again,
+			a command that was previously defined in that script
+			will be silently replaced.
+
 
 :delc[ommand] {cmd}				*:delc* *:delcommand* *E184*
 			Delete the user-defined command {cmd}.
@@ -1227,7 +1234,8 @@ See |:verbose-cmd| for more information.
 :comc[lear]						*:comc* *:comclear*
 			Delete all user-defined commands.
 
-Command attributes
+
+Command attributes ~
 
 User-defined commands are treated by Vim just like any other Ex commands.  They
 can have arguments, or have a range specified.  Arguments are subject to
@@ -1238,8 +1246,9 @@ There are a number of attributes, split into four categories: argument
 handling, completion behavior, range handling, and special cases.  The
 attributes are described below, by category.
 
-Argument handling				*E175* *E176* *:command-nargs*
 
+Argument handling ~
+						*E175* *E176* *:command-nargs*
 By default, a user defined command will take no arguments (and an error is
 reported if any are supplied).  However, it is possible to specify that the
 command can take arguments, using the -nargs attribute.  Valid cases are:
@@ -1268,8 +1277,10 @@ defined, not where it is invoked!  Example:
 Executing script2.vim will result in "None" being echoed.  Not what you
 intended!  Calling a function may be an alternative.
 
-Completion behavior				*:command-completion* *E179*
-					*E180* *E181* *:command-complete*
+
+Completion behavior ~
+				*:command-completion* *E179* *E180* *E181*
+				*:command-complete*
 By default, the arguments of user defined commands do not undergo completion.
 However, by specifying one or the other of the following attributes, argument
 completion can be enabled:
@@ -1314,9 +1325,9 @@ completion can be enabled:
 Note: That some completion methods might expand environment variables.
 
 
-Custom completion			*:command-completion-custom*
-					*:command-completion-customlist*
-					*E467* *E468*
+Custom completion ~
+				*:command-completion-custom*
+				*:command-completion-customlist* *E467* *E468*
 It is possible to define customized completion schemes via the "custom,{func}"
 or the "customlist,{func}" completion argument.  The {func} part should be a
 function with the following signature: >
@@ -1361,8 +1372,8 @@ the 'path' option: >
 This example does not work for file names with spaces!
 
 
-Range handling				*E177* *E178* *:command-range*
-							*:command-count*
+Range handling ~
+				*E177* *E178* *:command-range* *:command-count*
 By default, user-defined commands do not accept a line number range.  However,
 it is possible to specify that the command does take a range (the -range
 attribute), or that it takes an arbitrary count value, either in the line
@@ -1396,8 +1407,11 @@ Possible values are:
 	-addr=loaded_buffers	Range for loaded buffers
 	-addr=windows		Range for windows
 	-addr=tabs		Range for tab pages
+	-addr=other		other kind of range
 
-Special cases				*:command-bang* *:command-bar*
+
+Special cases ~
+					*:command-bang* *:command-bar*
 					*:command-register* *:command-buffer*
 There are some special cases as well:
 
@@ -1415,7 +1429,8 @@ replacement text separately.
 Note that these arguments can be abbreviated, but that is a deprecated
 feature.  Use the full name for new scripts.
 
-Replacement text
+
+Replacement text ~
 
 The replacement text for a user defined command is scanned for special escape
 sequences, using <...> notation.  Escape sequences are replaced with values

runtime/doc/mbyte.txt

@@ -14,9 +14,6 @@ For an introduction to the most common features, see |usr_45.txt| in the user
 manual.
 For changing the language of messages and menus see |mlang.txt|.
 
-{not available when compiled without the |+multi_byte| feature}
-
-
 1.  Getting started			|mbyte-first|
 2.  Locale				|mbyte-locale|
 3.  Encoding				|mbyte-encoding|
@@ -44,16 +41,6 @@ features.  Unfortunately, every system has its own way to deal with multibyte
 languages and it is quite complicated.
 
 
-COMPILING
-
-If you already have a compiled Vim program, check if the |+multi_byte| feature
-is included.  The |:version| command can be used for this.
-
-If +multi_byte is not included, you should compile Vim with "normal", "big" or
-"huge" features.  You can further tune what features are included.  See the
-INSTALL files in the source directory.
-
-
 LOCALE
 
 First of all, you must make sure your current locale is set correctly.  If

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 8.1.  Last change: 2018 Feb 04
+*message.txt*   For Vim version 8.1.  Last change: 2018 Dec 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -557,14 +557,6 @@ This message is only given when Vim detects a problem when searching for a
 tag.  Sometimes this message is not given, even though the tags file is not
 properly sorted.
 
-							*E460*  >
-  The resource fork would be lost (add ! to override)
-
-On the Macintosh (classic), when writing a file, Vim attempts to preserve all
-info about a file, including its resource fork.  If this is not possible you
-get this error message.  Append "!" to the command name to write anyway (and
-lose the info).
-
 							*E424*  >
   Too many different highlighting attributes in use
 

runtime/doc/mlang.txt

@@ -102,8 +102,10 @@ Or:
 
 This also contains tools xgettext, msgformat and others.
 
-libintl.dll should be placed in same directory with (g)vim.exe, or some
-place where PATH environment value describe.  Vim also finds libintl-8.dll.
+libintl.dll should be placed in same directory as (g)vim.exe, or one of the
+directories listed in the PATH environment value.  Vim also looks for the
+alternate names "libintl-8.dll" and "intl.dll".
+
 Message files (vim.mo) have to be placed in "$VIMRUNTIME/lang/xx/LC_MESSAGES",
 where "xx" is the abbreviation of the language (mostly two letters).
 

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.1.  Last change: 2017 Oct 15
+*motion.txt*    For Vim version 8.1.  Last change: 2019 Mar 02
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -113,7 +113,7 @@ This cannot be repeated: >
 	endif<CR>
 Note that when using ":" any motion becomes characterwise exclusive.
 
-
+								*forced-motion*
 FORCING A MOTION TO BE LINEWISE, CHARACTERWISE OR BLOCKWISE
 
 When a motion is not of the type you would like to use, you can force another
@@ -320,7 +320,7 @@ _  <underscore>		[count] - 1 lines downward, on the first non-blank
 G			Goto line [count], default last line, on the first
 			non-blank character |linewise|.  If 'startofline' not
 			set, keep the same column.
-			G is a one of |jump-motions|.
+			G is one of the |jump-motions|.
 
 							*<C-End>*
 <C-End>			Goto line [count], default last line, on the last
@@ -1021,7 +1021,7 @@ These commands are not marks themselves, but jump to a mark:
 
 A "jump" is a command that normally moves the cursor several lines away.  If
 you make the cursor "jump" the position of the cursor before the jump is
-remembered.  You can return to that position with the "''" and "``" command,
+remembered.  You can return to that position with the "''" and "``" commands,
 unless the line containing that position was changed or deleted.  The
 following commands are "jump" commands: "'", "`", "G", "/", "?", "n", "N",
 "%", "(", ")", "[[", "]]", "{", "}", ":s", ":tag", "L", "M", "H" and the

runtime/doc/netbeans.txt

@@ -1,10 +1,10 @@
-*netbeans.txt*  For Vim version 8.1.  Last change: 2016 Jul 15
+*netbeans.txt*  For Vim version 8.1.  Last change: 2019 Jan 17
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur et al.
 
 
-					*netbeans* *netbeans-support*
+					*netbeans* *NetBeans* *netbeans-support*
 
 Vim NetBeans Protocol: a socket interface for Vim integration into an IDE.
 
@@ -123,8 +123,18 @@ Currently the NetBeans interface is supported by Vim running in a terminal and
 by gvim when it is run with one of the following GUIs: GTK, GNOME, Windows,
 Athena and Motif.
 
-If Motif support is required the user must supply XPM libraries.  See
-|workshop-xpm| for details on obtaining the latest version of XPM.
+							*netbeans-xpm*
+If Motif support is required the user must supply XPM libraries.
+The XPM library is required to show images within Vim with Motif or Athena.
+Without it the toolbar and signs will be disabled.
+
+The XPM library is provided by Arnaud Le Hors of the French National Institute
+for Research in Computer Science and Control.  It can be downloaded from
+http://cgit.freedesktop.org/xorg/lib/libXpm.  The current release, as of this
+writing, is xpm-3.4k-solaris.tgz, which is a gzip'ed tar file.  If you create
+the directory /usr/local/xpm and untar the file there you can use the
+uncommented lines in the Makefile without changing them.  If you use another
+xpm directory you will need to change the XPM_DIR in src/Makefile.
 
 
 On MS-Windows:

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.1.  Last change: 2018 May 15
+*options.txt*	For Vim version 8.1.  Last change: 2019 Mar 08
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -121,9 +121,9 @@ When 'verbose' is non-zero, displaying an option value will also tell where it
 was last set.  Example: >
 	:verbose set shiftwidth cindent?
 <  shiftwidth=4 ~
-		  Last set from modeline ~
+	  Last set from modeline line 1 ~
   cindent ~
-		  Last set from /usr/local/share/vim/vim60/ftplugin/c.vim ~
+	  Last set from /usr/local/share/vim/vim60/ftplugin/c.vim line 30 ~
 This is only done when specific option values are requested, not for ":verbose
 set all" or ":verbose set" without an argument.
 When the option was set by hand there is no "Last set" message.
@@ -132,7 +132,7 @@ autocommand, the script in which it was defined is reported.
 Note that an option may also have been set as a side effect of setting
 'compatible'.
 A few special texts:
-	Last set from modeline ~
+	Last set from modeline line 1 ~
 		Option was set in a |modeline|.
 	Last set from --cmd argument ~
 		Option was set with command line argument |--cmd| or +.
@@ -354,12 +354,12 @@ files.  You use this command: >
 	:setlocal makeprg=perlmake
 You can switch back to using the global value by making the local value empty: >
 	:setlocal makeprg=
-This only works for a string option.  For a boolean option you need to use the
-"<" flag, like this: >
+This only works for a string option.  For a number or boolean option you need
+to use the "<" flag, like this: >
 	:setlocal autoread<
-Note that for non-boolean options using "<" copies the global value to the
-local value, it doesn't switch back to using the global value (that matters
-when the global value changes later).  You can also use: >
+Note that for non-boolean and non-number options using "<" copies the global
+value to the local value, it doesn't switch back to using the global value
+(that matters when the global value changes later).  You can also use: >
 	:set path<
 This will make the local value of 'path' empty, so that the global value is
 used.  Thus it does the same as: >
@@ -383,9 +383,9 @@ Setting the filetype
 
 			When the optional FALLBACK argument is present, a
 			later :setfiletype command will override the
-			'filetype'.  This is to used for filetype detections
-			that are just a guess.  |did_filetype()| will return
-			false after this command.
+			'filetype'.  This is to be used for filetype
+			detections that are just a guess.  |did_filetype()|
+			will return false after this command.
 
 			{not in Vi}
 
@@ -688,20 +688,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 			{only available when compiled with the |+farsi|
 			feature}
-	When on, the second language is Farsi.  In editing mode CTRL-_ toggles
-	the keyboard map between Farsi and English, when 'allowrevins' set.
-
-	When off, the keyboard map toggles between Hebrew and English.  This
-	is useful to start the Vim in native mode i.e. English (left-to-right
-	mode) and have default second language Farsi or Hebrew (right-to-left
-	mode).  See |farsi.txt|.
+	This option was for using Farsi, which has been removed.  See
+	|farsi.txt|.
 
 						*'ambiwidth'* *'ambw'*
 'ambiwidth' 'ambw'	string (default: "single")
 			global
 			{not in Vi}
-			{only available when compiled with the |+multi_byte|
-			feature}
 	Only effective when 'encoding' is "utf-8" or another Unicode encoding.
 	Tells Vim what to do with characters with East Asian Width Class
 	Ambiguous (such as Euro, Registered Sign, Copyright Sign, Greek
@@ -846,6 +839,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'{A-Z0-9}, or `{A-Z0-9} command takes one to another file.
 	Note that for some commands the 'autowrite' option is not used, see
 	'autowriteall' for that.
+	Some buffers will not be written, specifically when 'buftype' is
+	"nowrite", "nofile", "terminal" or "prompt".
 
 			 *'autowriteall'* *'awa'* *'noautowriteall'* *'noawa'*
 'autowriteall' 'awa'	boolean	(default off)
@@ -1055,9 +1050,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	- To include a comma in a directory name precede it with a backslash.
 	- A directory name may end in an '/'.
 	- For Unix and Win32, if a directory ends in two path separators "//",
-	  the swap file name will be built from the complete path to the file
-	  with all path separators changed to percent '%' signs. This will
-	  ensure file name uniqueness in the backup directory.
+	  the backup file name will be built from the complete path to the
+	  file with all path separators changed to percent '%' signs. This
+	  will ensure file name uniqueness in the backup directory.
 	  On Win32, it is also possible to end with "\\".  However, When a
 	  separating comma is following, you must use "//", since "\\" will
 	  include the comma in the file name. Therefore it is recommended to
@@ -1280,8 +1275,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 'bomb'			boolean	(default off)
 			local to buffer
 			{not in Vi}
-			{only available when compiled with the |+multi_byte|
-			feature}
 	When writing a file and the following conditions are met, a BOM (Byte
 	Order Mark) is prepended to the file:
 	- this option is on
@@ -1443,8 +1436,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 'casemap' 'cmp'		string	(default: "internal,keepascii")
 			global
 			{not in Vi}
-			{only available when compiled with the |+multi_byte|
-			feature}
 	Specifies details about changing the case of letters.  It may contain
 	these words, separated by a comma:
 	internal	Use internal case mapping functions, the current
@@ -1500,8 +1491,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 				*'charconvert'* *'ccv'* *E202* *E214* *E513*
 'charconvert' 'ccv'	string (default "")
 			global
-			{only available when compiled with the |+multi_byte|
-			and |+eval| features}
+			{only available when compiled with the |+eval| feature}
 			{not in Vi}
 	An expression that is used for character encoding conversion.  It is
 	evaluated when a file that is to be read or has been written has a
@@ -1562,7 +1552,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	NOTE: This option is reset when 'compatible' is set.
 
 							*'cinkeys'* *'cink'*
-'cinkeys' 'cink'	string	(default "0{,0},0),:,0#,!^F,o,O,e")
+'cinkeys' 'cink'	string	(default "0{,0},0),0],:,0#,!^F,o,O,e")
 			local to buffer
 			{not in Vi}
 			{not available when compiled without the |+cindent|
@@ -1636,10 +1626,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 			area extended, Vim tries to become the owner of the
 			windowing system's global selection or put the
 			selected text on the clipboard used by the selection
-			register "*.  See |guioptions_a| and |quotestar| for
-			details.  When the GUI is active, the 'a' flag in
-			'guioptions' is used, when the GUI is not active, this
-			"autoselect" flag is used.
+			register "*.  See |'go-a'| and |quotestar| for details.
+			When the GUI is active, the 'a' flag in 'guioptions'
+			is used, when the GUI is not active, this "autoselect"
+			flag is used.
 			Also applies to the modeless selection.
 
 						*clipboard-autoselectplus*
@@ -1660,7 +1650,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 			You probably want to add this only temporarily,
 			possibly use BufEnter autocommands.
 			Only supported for GTK version 2 and later.
-			Only available with the |+multi_byte| feature.
 
 						*clipboard-exclude*
 	exclude:{pattern}
@@ -1997,8 +1986,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	displayed.  E.g., when moving vertically it may change column.
 
 
-'conceallevel' 'cole'		*'conceallevel'* *'cole'*
-			number (default 0)
+						*'conceallevel'* *'cole'*
+'conceallevel' 'cole'	number (default 0)
 			local to window
 			{not in Vi}
 			{not available when compiled without the |+conceal|
@@ -2271,7 +2260,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 			deleted only once.  Also when repeating "R" with "."
 			and a count.
 								*cpo-y*
-		y	A yank command can be redone with ".".
+		y	A yank command can be redone with ".".  Think twice if
+			you really want to use this, it may break some
+			plugins, since most people expect "." to only repeat a
+			change.
 								*cpo-Z*
 		Z	When using "w!" while the 'readonly' option is set,
 			don't reset 'readonly'.
@@ -2368,7 +2360,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 
 						*'cryptmethod'* *'cm'*
-'cryptmethod' 'cm'	string	(default "zip")
+'cryptmethod' 'cm'	string	(default "blowfish2")
 			global or local to buffer |global-local|
 			{not in Vi}
 	Method used for encryption when the buffer is written to a file:
@@ -2399,8 +2391,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	modifications.  Also see |:X|.
 
 	When setting the global value to an empty string, it will end up with
-	the value "zip".  When setting the local value to an empty string the
-	buffer will use the global value.
+	the value "blowfish2".  When setting the local value to an empty
+	string the buffer will use the global value.
 
 	When a new encryption method is added in a later version of Vim, and
 	the current version does not recognize it, you will get	*E821* .
@@ -2552,8 +2544,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 'delcombine' 'deco'	boolean (default off)
 			global
 			{not in Vi}
-			{only available when compiled with the |+multi_byte|
-			feature}
 	If editing Unicode and this option is set, backspace and Normal mode
 	"x" delete each combining character on its own.  When it is off (the
 	default) the character along with its combining characters are
@@ -2607,13 +2597,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 			{not available when compiled without the |+diff|
 			feature}
-	Expression which is evaluated to obtain an ed-style diff file from two
-	versions of a file.  See |diff-diffexpr|.
+	Expression which is evaluated to obtain a diff file (either ed-style
+	or unified-style) from two versions of a file.  See |diff-diffexpr|.
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
 						*'dip'* *'diffopt'*
-'diffopt' 'dip'		string	(default "filler")
+'diffopt' 'dip'		string	(default "internal,filler")
 			global
 			{not in Vi}
 			{not available when compiled without the |+diff|
@@ -2630,8 +2620,20 @@ A jump table for the options with a short description can be found at |Q_op|.
 		context:{n}	Use a context of {n} lines between a change
 				and a fold that contains unchanged lines.
 				When omitted a context of six lines is used.
+				When using zero the context is actually one,
+				since folds require a line in between, also
+				for a deleted line.
 				See |fold-diff|.
 
+		iblank		Ignore changes where lines are all blank.  Adds
+				the "-B" flag to the "diff" command if
+				'diffexpr' is empty.  Check the documentation
+				of the "diff" command for what this does
+				exactly.
+				NOTE: the diff windows will get out of sync,
+				because no differences between blank lines are
+				taken into account.
+
 		icase		Ignore changes in case of text.  "a" and "A"
 				are considered the same.  Adds the "-i" flag
 				to the "diff" command if 'diffexpr' is empty.
@@ -2643,6 +2645,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 				exactly.  It should ignore adding trailing
 				white space, but not leading white space.
 
+		iwhiteall	Ignore all white space changes.  Adds
+				the "-w" flag to the "diff" command if
+				'diffexpr' is empty.  Check the documentation
+				of the "diff" command for what this does
+				exactly.
+
+		iwhiteeol	Ignore white space changes at end of line.
+				Adds the "-Z" flag to the "diff" command if
+				'diffexpr' is empty.  Check the documentation
+				of the "diff" command for what this does
+				exactly.
+
 		horizontal	Start diff mode with horizontal splits (unless
 				explicitly specified otherwise).
 
@@ -2655,11 +2669,31 @@ A jump table for the options with a short description can be found at |Q_op|.
 		foldcolumn:{n}	Set the 'foldcolumn' option to {n} when
 				starting diff mode.  Without this 2 is used.
 
-	Examples: >
+		internal	Use the internal diff library.  This is
+				ignored when 'diffexpr' is set.  *E960*
+				When running out of memory when writing a
+				buffer this item will be ignored for diffs
+				involving that buffer.  Set the 'verbose'
+				option to see when this happens.
 
-		:set diffopt=filler,context:4
+		indent-heuristic
+				Use the indent heuristic for the internal
+				diff library.
+
+                algorithm:{text} Use the specified diff algorithm with the
+				internal diff engine. Currently supported
+				algorithms are:
+				myers      the default algorithm
+				minimal    spend extra time to generate the
+					   smallest possible diff
+				patience   patience diff algorithm
+				histogram  histogram diff algorithm
+
+	Examples: >
+		:set diffopt=internal,filler,context:4
 		:set diffopt=
-		:set diffopt=filler,foldcolumn:3
+		:set diffopt=internal,filler,foldcolumn:3
+		:set diffopt-=internal  " do NOT use the internal diff parser
 <
 				     *'digraph'* *'dg'* *'nodigraph'* *'nodg'*
 'digraph' 'dg'		boolean	(default off)
@@ -2763,16 +2797,12 @@ A jump table for the options with a short description can be found at |Q_op|.
 'emoji' 'emo'	boolean (default: on)
 			global
 			{not in Vi}
-			{only available when compiled with the |+multi_byte|
-			feature}
 	When on all Unicode emoji characters are considered to be full width.
 
 
 					*'encoding'* *'enc'* *E543*
 'encoding' 'enc'	string (default: "latin1" or value from $LANG)
 			global
-			{only available when compiled with the |+multi_byte|
-			feature}
 			{not in Vi}
 	Sets the character encoding used inside Vim.  It applies to text in
 	the buffers, registers, Strings in expressions, text stored in the
@@ -2975,8 +3005,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 				*'fileencoding'* *'fenc'* *E213*
 'fileencoding' 'fenc'	string (default: "")
 			local to buffer
-			{only available when compiled with the |+multi_byte|
-			feature}
 			{not in Vi}
 	Sets the character encoding for the file of this buffer.
 
@@ -3032,8 +3060,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 				    "ucs-bom,utf-8,default,latin1" when
 				    'encoding' is set to a Unicode value)
 			global
-			{only available when compiled with the |+multi_byte|
-			feature}
 			{not in Vi}
 	This is a list of character encodings considered when starting to edit
 	an existing file.  When a file is read, Vim tries to use the first
@@ -3088,9 +3114,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	is read.
 
 					*'fileformat'* *'ff'*
-'fileformat' 'ff'	string (MS-DOS, MS-Windows, OS/2 default: "dos",
-				Unix default: "unix",
-				Macintosh default: "mac")
+'fileformat' 'ff'	string (MS-Windows default: "dos",
+				Unix, macOS default: "unix")
 			local to buffer
 			{not in Vi}
 	This gives the <EOL> of the current buffer, which is used for
@@ -3113,9 +3138,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 					*'fileformats'* *'ffs'*
 'fileformats' 'ffs'	string (default:
-				Vim+Vi	MS-DOS, MS-Windows OS/2: "dos,unix",
-				Vim	Unix: "unix,dos",
-				Vim	Mac: "mac,unix,dos",
+				Vim+Vi	MS-Windows: "dos,unix",
+				Vim	Unix, macOS: "unix,dos",
 				Vi	Cygwin: "unix,dos",
 				Vi	others: "")
 			global
@@ -3257,9 +3281,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 			{only available when compiled with the |+rightleft|
 			feature}
-	When on, the keyboard is mapped for the Farsi character set.
-	Normally you would set 'allowrevins' and use CTRL-_ in insert mode to
-	toggle this option |i_CTRL-_|.  See |farsi.txt|.
+	This option was for using Farsi, which has been removed.  See
+	|farsi.txt|.
 
 						*'foldclose'* *'fcl'*
 'foldclose' 'fcl'	string (default "")
@@ -3852,8 +3875,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	screen.
 
 						*'guioptions'* *'go'*
-'guioptions' 'go'	string	(default "egmrLtT"   (MS-Windows, "t" is
-						   removed in |defaults.vim|),
+'guioptions' 'go'	string	(default "egmrLtT"   (MS-Windows,
+					   "t" is removed in |defaults.vim|),
 					 "aegimrLtT" (GTK, Motif and Athena),
 					 )
 			global
@@ -3873,7 +3896,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 		terminal to list the command output.
 		The terminal window will be positioned at the bottom, and grow
 		upwards as needed.
-							*guioptions_a* *'go-a'*
+								*'go-a'*
 	  'a'	Autoselect:  If present, then whenever VISUAL mode is started,
 		or the Visual area extended, Vim tries to become the owner of
 		the windowing system's global selection.  This means that the
@@ -4090,11 +4113,12 @@ A jump table for the options with a short description can be found at |Q_op|.
 				     l:Search,m:MoreMsg,M:ModeMsg,n:LineNr,
 				     N:CursorLineNr,r:Question,s:StatusLine,
 				     S:StatusLineNC,c:VertSplit,t:Title,
-				     v:Visual,w:WarningMsg,W:WildMenu,f:Folded,
-				     F:FoldColumn,A:DiffAdd,C:DiffChange,
-				     D:DiffDelete,T:DiffText,>:SignColumn,
+				     v:Visual,V:VisualNOS,w:WarningMsg,
+				     W:WildMenu,f:Folded,F:FoldColumn,
+				     A:DiffAdd,C:DiffChange,D:DiffDelete,
+				     T:DiffText,>:SignColumn,-:Conceal,
 				     B:SpellBad,P:SpellCap,R:SpellRare,
-				     L:SpellLocal,-:Conceal,+:Pmenu,=:PmenuSel,
+				     L:SpellLocal,+:Pmenu,=:PmenuSel,
 				     x:PmenuSbar,X:PmenuThumb,*:TabLine,
 				     #:TabLineSel,_:TabLineFill,!:CursorColumn,
 				     .:CursorLine,o:ColorColumn,q:QuickFixLine,
@@ -4139,14 +4163,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 	|hl-DiffDelete|	 D  deleted line in diff mode
 	|hl-DiffText|	 T  inserted text in diff mode
 	|hl-SignColumn|	 >  column used for |signs|
+	|hl-Conceal|	 -  the placeholders used for concealed characters
+			    (see 'conceallevel')
 	|hl-SpellBad|	 B  misspelled word |spell|
 	|hl-SpellCap|	 P  word that should start with capital |spell|
 	|hl-SpellRare|	 R  rare word |spell|
 	|hl-SpellLocal|	 L  word from other region |spell|
-	|hl-Conceal|	 -  the placeholders used for concealed characters
-			    (see 'conceallevel')
 	|hl-Pmenu|	 +  popup menu normal line
-	|hl-PmenuSel|    =  popup menu normal line
+	|hl-PmenuSel|	 =  popup menu selected line
 	|hl-PmenuSbar|	 x  popup menu scrollbar
 	|hl-PmenuThumb|	 X  popup menu scrollbar thumb
 
@@ -4279,8 +4303,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 'imactivatefunc' 'imaf'	string (default "")
 			global
 			{not in Vi}
-			{only available when compiled with the |+multi_byte|
-			feature}
 	This option specifies a function that will be called to
 	activate or deactivate the Input Method.
 	It is not used in the GUI.
@@ -4332,8 +4354,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 'imcmdline' 'imc'	boolean (default off)
 			global
 			{not in Vi}
-			{only available when compiled with the |+multi_byte|
-			feature}
 	When set the Input Method is always on when starting to edit a command
 	line, unless entering a search pattern (see 'imsearch' for that).
 	Setting this option is useful when your input method allows entering
@@ -4344,8 +4364,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 'imdisable' 'imd'	boolean (default off, on for some systems (SGI))
 			global
 			{not in Vi}
-			{only available when compiled with the |+multi_byte|
-			feature}
 	When set the Input Method is never used.  This is useful to disable
 	the IM when it doesn't work properly.
 	Currently this option is on by default for SGI/IRIX machines.  This
@@ -4398,8 +4416,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 'imstatusfunc' 'imsf'	string (default "")
 			global
 			{not in Vi}
-			{only available when compiled with the |+multi_byte|
-			feature}
 	This option specifies a function that is called to obtain the status
 	of Input Method.  It must return a positive number when IME is active.
 	It is not used in the GUI.
@@ -4480,8 +4496,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	so far, matches.  The matched string is highlighted.  If the pattern
 	is invalid or not found, nothing is shown.  The screen will be updated
 	often, this is only useful on fast terminals.
-	Also applies to the `:s`, `:g` and `:v` commands.
-	Note that the match will be shown, but the cursor will return to its
+	Also applies to the pattern in commands: >
+		:global
+		:lvimgrep
+		:lvimgrepadd
+		:smagic
+		:snomagic
+		:sort
+		:substitute
+		:vglobal
+		:vimgrep
+		:vimgrepadd
+<	Note that the match will be shown, but the cursor will return to its
 	original position when no match is found and when pressing <Esc>.  You
 	still need to finish the search command with <Enter> to move the
 	cursor to the match.
@@ -4550,7 +4576,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 
 						*'indentkeys'* *'indk'*
-'indentkeys' 'indk'	string	(default "0{,0},:,0#,!^F,o,O,e")
+'indentkeys' 'indk'	string	(default "0{,0},0),0],:,0#,!^F,o,O,e")
 			local to buffer
 			{not in Vi}
 			{not available when compiled without the |+cindent|
@@ -4666,7 +4692,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Identifiers are used in recognizing environment variables and after a
 	match of the 'define' option.  It is also used for "\i" in a
 	|pattern|.  See 'isfname' for a description of the format of this
-	option.
+	option.  For '@' only characters up to 255 are used.
 	Careful: If you change this option, it might break expanding
 	environment variables.  E.g., when '/' is included and Vim tries to
 	expand "$HOME/.viminfo".  Maybe you should change 'iskeyword' instead.
@@ -4680,8 +4706,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	Keywords are used in searching and recognizing with many commands:
 	"w", "*", "[i", etc.  It is also used for "\k" in a |pattern|.  See
-	'isfname' for a description of the format of this option.  For C
-	programs you could use "a-z,A-Z,48-57,_,.,-,>".
+	'isfname' for a description of the format of this option.  For '@'
+	characters above 255 check the "word" character class.
+	For C programs you could use "a-z,A-Z,48-57,_,.,-,>".
 	For a help file it is set to all non-blank printable characters except
 	'*', '"' and '|' (so that CTRL-] on a command finds the help for that
 	command).
@@ -5008,11 +5035,26 @@ A jump table for the options with a short description can be found at |Q_op|.
 			omitted, there is no extra character at the end of the
 			line.
 							*lcs-tab*
-	  tab:xy	Two characters to be used to show a tab.  The first
-			char is used once.  The second char is repeated to
-			fill the space that the tab normally occupies.
-			"tab:>-" will show a tab that takes four spaces as
-			">---".  When omitted, a tab is show as ^I.
+	  tab:xy[z]	Two or three characters to be used to show a tab.
+			The third character is optional.
+
+	  tab:xy	The 'x' is always used, then 'y' as many times as will
+			fit.  Thus "tab:>-" displays:
+				>
+				>-
+				>--
+				etc.
+
+	  tab:xyz	The 'z' is always used, then 'x' is prepended, and
+			then 'y' is used as many times as will fit.  Thus
+			"tab:<->" displays:
+				>
+				<>
+				<->
+				<-->
+				etc.
+
+			When "tab:" is omitted, a tab is shown as ^I.
 							*lcs-space*
 	  space:c	Character to show for a space.  When omitted, spaces
 			are left blank.
@@ -5118,8 +5160,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 					*'makeencoding'* *'menc'*
 'makeencoding' 'menc'	string	(default "")
 			global or local to buffer |global-local|
-			{only available when compiled with the |+multi_byte|
-			feature}
 			{not in Vi}
 	Encoding used for reading the output of external commands.  When empty,
 	encoding is not converted.
@@ -5186,8 +5226,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 'maxcombine' 'mco'	number (default 2)
 			global
 			{not in Vi}
-			{only available when compiled with the |+multi_byte|
-			feature}
 	The maximum number of combining characters supported for displaying.
 	Only used when 'encoding' is "utf-8".
 	The default is OK for most languages.  Hebrew may require 4.
@@ -5392,7 +5430,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 		h	all previous modes when editing a help file
 		a	all previous modes
 		r	for |hit-enter| and |more-prompt| prompt
-	Normally you would enable the mouse in all four modes with: >
+	Normally you would enable the mouse in all five modes with: >
 		:set mouse=a
 <	When the mouse is not enabled, the GUI will still use the mouse for
 	modeless selection.  This doesn't move the text cursor.
@@ -5462,8 +5500,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The 'mousemodel' option is set by the |:behave| command.
 
 					*'mouseshape'* *'mouses'* *E547*
-'mouseshape' 'mouses'	string	(default "i:beam,r:beam,s:updown,sd:cross,
-					m:no,ml:up-arrow,v:rightup-arrow")
+'mouseshape' 'mouses'	string	(default "i-r:beam,s:updown,sd:udsizing,
+					vs:leftright,vd:lrsizing,m:no,
+					ml:up-arrow,v:rightup-arrow")
 			global
 			{not in Vi}
 			{only available when compiled with the |+mouseshape|
@@ -5914,7 +5953,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	security reasons.
 
 						*'printencoding'* *'penc'*
-'printencoding' 'penc'	String	(default empty, except for some systems)
+'printencoding' 'penc'	string	(default empty, except for some systems)
 			global
 			{not in Vi}
 			{only available when compiled with the |+printer|
@@ -5923,7 +5962,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	See |penc-option|.
 
 						*'printexpr'* *'pexpr'*
-'printexpr' 'pexpr'	String	(default: see below)
+'printexpr' 'pexpr'	string	(default: see below)
 			global
 			{not in Vi}
 			{only available when compiled with the |+printer|
@@ -5955,8 +5994,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 'printmbcharset' 'pmbcs'  string (default "")
 			global
 			{not in Vi}
-			{only available when compiled with the |+printer|,
-			|+postscript| and |+multi_byte| features}
+			{only available when compiled with the |+printer|
+			and |+postscript| features}
 	The CJK character set to be used for CJK output from |:hardcopy|.
 	See |pmbcs-option|.
 
@@ -5964,8 +6003,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 'printmbfont' 'pmbfn'	string (default "")
 			global
 			{not in Vi}
-			{only available when compiled with the |+printer|,
-			|+postscript| and |+multi_byte| features}
+			{only available when compiled with the |+printer|
+			and |+postscript| features}
 	List of font names to be used for CJK output from |:hardcopy|.
 	See |pmbfn-option|.
 
@@ -6517,14 +6556,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'scrolloff'* *'so'*
 'scrolloff' 'so'	number	(default 0, set to 5 in |defaults.vim|)
-			global
+			global or local to window |global-local|
 			{not in Vi}
 	Minimal number of screen lines to keep above and below the cursor.
 	This will make some context visible around where you are working.  If
 	you set it to a very large value (999) the cursor line will always be
 	in the middle of the window (except at the start or end of the file or
 	when long lines wrap).
-	For scrolling horizontally see 'sidescrolloff'.
+	After using the local value, go back the global value with one of
+	these two: >
+		setlocal scrolloff<
+		setlocal scrolloff=-1
+<	For scrolling horizontally see 'sidescrolloff'.
 	NOTE: This option is set to 0 when 'compatible' is set.
 
 						*'scrollopt'* *'sbo'*
@@ -7079,7 +7122,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'sidescrolloff'* *'siso'*
 'sidescrolloff' 'siso'	number (default 0)
-			global
+			global or local to window |global-local|
 			{not in Vi}
 	The minimal number of screen columns to keep to the left and to the
 	right of the cursor if 'nowrap' is set.  Setting this option to a
@@ -7089,7 +7132,11 @@ A jump table for the options with a short description can be found at |Q_op|.
 	to a large value (like 999) has the effect of keeping the cursor
 	horizontally centered in the window, as long as one does not come too
 	close to the beginning of the line.
-	NOTE: This option is set to 0 when 'compatible' is set.
+	After using the local value, go back the global value with one of
+	these two: >
+		setlocal sidescrolloff<
+		setlocal sidescrolloff=-1
+<	NOTE: This option is set to 0 when 'compatible' is set.
 
 	Example: Try this together with 'sidescroll' and 'listchars' as
 		 in the following example to never allow the cursor to move
@@ -7285,8 +7332,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 	After this option has been set successfully, Vim will source the files
 	"spell/LANG.vim" in 'runtimepath'.  "LANG" is the value of 'spelllang'
-	up to the first comma, dot or underscore.
-	Also see |set-spc-auto|.
+	up to the first character that is not an ASCII letter or number and
+	not a dash.  Also see |set-spc-auto|.
 
 
 						*'spellsuggest'* *'sps'*
@@ -7703,6 +7750,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	the text to be displayed.  Use "%1T" for the first label, "%2T" for
 	the second one, etc.  Use "%X" items for closing labels.
 
+	When changing something that is used in 'tabline' that does not
+	trigger it to be updated, use |:redrawtabline|.
+
 	Keep in mind that only one of the tab pages is the current one, others
 	are invisible and you can't jump to their windows.
 
@@ -7921,8 +7971,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 'termencoding' 'tenc'	string	(default ""; with GTK+ GUI: "utf-8"; with
 						    Macintosh GUI: "macroman")
 			global
-			{only available when compiled with the |+multi_byte|
-			feature}
 			{not in Vi}
 	Encoding used for the terminal.  This specifies what character
 	encoding the keyboard produces and the display will understand.  For
@@ -8018,6 +8066,26 @@ A jump table for the options with a short description can be found at |Q_op|.
 	the size of the terminal.  In that case the Vim window will be
 	adjusted to that size, if possible.
 
+						*'termwintype'* *'twt'*
+'termwintype' 'twt'	string  (default "")
+			global
+			{not in Vi}
+			{only available when compiled with the |terminal|
+			feature on MS-Windows}
+	Specify the virtual console (pty) used when opening the terminal
+	window.
+
+	Possible values are:
+	    ""		use ConPTY if it is stable, winpty otherwise
+	    "winpty"	use winpty, fail if not supported
+	    "conpty"	use |ConPTY|, fail if not supported
+
+	|ConPTY| support depends on the platform.  Windows 10 October 2018
+	Update is the first version that supports ConPTY, however it is still
+	considered unstable.  ConPTY might become stable in the next release
+	of Windows 10.  winpty support needs to be installed.  If neither is
+	supported then you cannot open a terminal window.
+
 						*'terse'* *'noterse'*
 'terse'			boolean	(default off)
 			global
@@ -8066,13 +8134,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global or local to buffer |global-local|
 			{not in Vi}
 	List of file names, separated by commas, that are used to lookup words
-	for thesaurus completion commands |i_CTRL-X_CTRL-T|.  Each line in
-	the file should contain words with similar meaning, separated by
-	non-keyword characters (white space is preferred).  Maximum line
-	length is 510 bytes.
-	To obtain a file to be used here, check out this ftp site:
-	[Sorry this link doesn't work anymore, do you know the right one?]
-	ftp://ftp.ox.ac.uk/pub/wordlists/  First get the README file.
+	for thesaurus completion commands |i_CTRL-X_CTRL-T|.
+
+	Each line in the file should contain words with similar meaning,
+	separated by non-keyword characters (white space is preferred).
+	Maximum line length is 510 bytes.
+
+	An English word list was added to this github issue:
+	https://github.com/vim/vim/issues/629#issuecomment-443293282
+	Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
+	~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file
+	name.
+
 	To include a comma in a file name precede it with a backslash.  Spaces
 	after a comma are ignored, otherwise spaces are included in the file
 	name.  See |option-backslash| about using backslashes.
@@ -8377,8 +8450,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	|t_RV| is set to the escape sequence to request the xterm version
 	number, more intelligent detection process runs.
 	The "xterm2" value will be set if the xterm version is reported to be
-	from 95 to 276.  The "sgr" value will be set if the xterm version is
-	277 or higher and when Vim detects Mac Terminal.app or iTerm2.
+	from 95 to 276.  The "sgr" value will be set if Vim detects Mac
+	Terminal.app, iTerm2 or mintty, and when the xterm version is 277 or
+	higher.
 	If you do not want 'ttymouse' to be set to "xterm2" or "sgr"
 	automatically, set t_RV to an empty string: >
 		:set t_RV=

runtime/doc/os_390.txt

@@ -83,10 +83,10 @@ There is no solution for this yet.
   ctags out there, that does it right, but we can't be sure.  So this seems to
   be a permanent restriction.
 
-- The cscope interface (|cscope|) doesn't work for the version of cscope
-  that we use on our mainframe.  We have a copy of version 15.0b12, and it
-  causes Vim to hang when using the "cscope add" command.  I'm guessing that
-  the binary format of the cscope database isn't quite what Vim is expecting.
+- The cscope interface (|cscope|) doesn't work for the version of cscope that
+  we use on our mainframe.  We have a copy of version 15.0b12, and it causes
+  Vim to hang when using the "cscope add" command.  I'm guessing that the
+  binary format of the cscope database isn't quite what Vim is expecting.
   I've tried to port the current version of cscope (15.3) to z/OS, without
   much success.  If anyone is interested in trying, drop me a line if you
   make any progress.
@@ -131,4 +131,4 @@ Also look at:
 
 
 ------------------------------------------------------------------------------
- vim:tw=78:fo=tcq2:ts=8:noet:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_vms.txt

@@ -1,4 +1,4 @@
-*os_vms.txt*    For Vim version 8.1.  Last change: 2018 May 06
+*os_vms.txt*    For Vim version 8.1.  Last change: 2019 Jan 29
 
 
 		  VIM REFERENCE MANUAL
@@ -104,6 +104,8 @@ to set up GUI fonts etc. correctly.  See :help xim from Vim command prompt.
 You may want to use GUI with GTK icons, then you have to download and install
 GTK for OpenVMS or at least runtime shareable images - LIBGTK from
 polarhome.com
+Post 7.2 Vim uses GTK2+ while the last GTK on OpenVMS is 1.2.10, therefore
+the GTK build is no longer available.
 
 For more advanced questions, please send your problem to Vim on VMS mailing
 list <vim-vms@polarhome.com>
@@ -201,10 +203,10 @@ You can check that everything is at the right place with the :version command.
 
 Example LOGIN.COM: >
 
-	$ define/nolog VIM RF10:[UTIL.VIM]
+ 	$ define/nolog VIM DKA0:[UTIL.VIM81]
 	$ vi*m :== mcr VIM:VIM.EXE
 	$ gv*im:== spawn/nowait/input=NLA0 mcr VIM:VIM.EXE -g -GEOMETRY 80x40
-	$ set disp/create/node=192.168.5.223/trans=tcpip
+	$ set disp/create/node=192.168.10.202/trans=tcpip
 
 Note: This set-up should be enough, if you are working on a standalone server or
 clustered environment, but if you want to use Vim as an internode editor in
@@ -764,6 +766,16 @@ GNU_TOOLS.ZIP package downloadable from http://www.polarhome.com/vim/
 
 9. VMS related changes					*vms-changes*
 
+Version 8.1
+- make necessary changes to build v8.1 on VMS
+
+Version 8.0
+- solve the 100% cpu usage issue while waiting for a keystroke
+- correct the VMS warnings and errors around handling the INFINITY (used in json.c)
+- minor VMS port related changes
+- correct the make_vms.mms file for 8.0
+- fix [.TESTDIR]make_vms.mms for 8.0
+
 Version 7.4
 - Undo: VMS can not handle more than one dot in the filenames use "dir/name" -> "dir/_un_name"
   add _un_ at the beginning to keep the extension

runtime/doc/os_win32.txt

@@ -303,4 +303,4 @@ A. Yes, place your favorite icon in bitmaps/vim.ico in a directory of
    'runtimepath'.  For example ~/vimfiles/bitmaps/vim.ico.
 
 
- vim:tw=78:fo=tcq2:ts=8:noet:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 8.1.  Last change: 2018 Mar 13
+*pattern.txt*   For Vim version 8.1.  Last change: 2019 Feb 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -295,7 +295,7 @@ the "*" is under your right hand middle finger (search to the right and down).
 
 								*E956*
 In very rare cases a regular expression is used recursively.  This can happen
-when executing a pattern takes a long time and when checkig for messages on
+when executing a pattern takes a long time and when checking for messages on
 channels a callback is invoked that also uses a pattern or an autocommand is
 triggered.  In most cases this should be fine, but if a pattern is in use when
 it's used again it fails.  Usually this means there is something wrong with
@@ -398,11 +398,11 @@ Use of "\m" makes the pattern after it be interpreted as if 'magic' is set,
 ignoring the actual value of the 'magic' option.
 Use of "\M" makes the pattern after it be interpreted as if 'nomagic' is used.
 							*/\v* */\V*
-Use of "\v" means that in the pattern after it all ASCII characters except
-'0'-'9', 'a'-'z', 'A'-'Z' and '_' have a special meaning.  "very magic"
+Use of "\v" means that after it, all ASCII characters except '0'-'9', 'a'-'z',
+'A'-'Z' and '_' have special meaning: "very magic"
 
-Use of "\V" means that in the pattern after it only the backslash and the
-terminating character (/ or ?) has a special meaning.  "very nomagic"
+Use of "\V" means that after it, only a backslash and terminating character
+(usually / or ?) have special meaning: "very nomagic"
 
 Examples:
 after:	  \v	   \m	    \M	     \V		matches ~
@@ -1118,6 +1118,9 @@ x	A single character, with no special meaning, matches itself
 *[:tab:]*	  [:tab:]		the <Tab> character
 *[:escape:]*	  [:escape:]		the <Esc> character
 *[:backspace:]*	  [:backspace:]		the <BS> character
+*[:ident:]*	  [:ident:]		identifier character (same as "\i")
+*[:keyword:]*	  [:keyword:]		keyword character (same as "\k")
+*[:fname:]*	  [:fname:]		file name character (same as "\f")
 	  The brackets in character class expressions are additional to the
 	  brackets delimiting a collection.  For example, the following is a
 	  plausible pattern for a UNIX filename: "[-./[:alnum:]_~]\+" That is,
@@ -1132,7 +1135,7 @@ x	A single character, with no special meaning, matches itself
 	  The "Func" column shows what library function is used.  The
 	  implementation depends on the system.  Otherwise:
 	  (1) Uses islower() for ASCII and Vim builtin rules for other
-	  characters when built with the |+multi_byte| feature.
+	  characters.
 	  (2) Uses Vim builtin rules
 	  (3) As with (1) but using isupper()
 							*/[[=* *[==]*
@@ -1208,7 +1211,7 @@ x	A single character, with no special meaning, matches itself
 \%u20AC	Matches the character specified with up to four hexadecimal
 	characters.
 \%U1234abcd	Matches the character specified with up to eight hexadecimal
-	characters.
+	characters, up to 0x7fffffff
 
 ==============================================================================
 7. Ignoring case in a pattern					*/ignorecase*

runtime/doc/pi_netrw.txt

@@ -3504,7 +3504,7 @@ Example: Clear netrw's marked file list via a mapping on gu >
 			- Click "Add..."
 			- Set External Editor (adjust path as needed, include
 			  the quotes and !.! at the end):
-			    "c:\Program Files\Vim\vim70\gvim.exe" !.!
+			    "c:\Program Files\Vim\vim81\gvim.exe" !.!
 			- Check that the filetype in the box below is
 			  {asterisk}.{asterisk} (all files), or whatever types
 			  you want (cec: change {asterisk} to * ; I had to
@@ -3754,8 +3754,8 @@ by obtaining a copy of the latest (often developmental) netrw at:
 
 The <netrw.vim> script is typically installed on systems as something like:
 >
-	/usr/local/share/vim/vim7x/plugin/netrwPlugin.vim
-	/usr/local/share/vim/vim7x/autoload/netrw.vim
+	/usr/local/share/vim/vim8x/plugin/netrwPlugin.vim
+	/usr/local/share/vim/vim8x/autoload/netrw.vim
 		(see output of :echo &rtp)
 <
 which is loaded automatically at startup (assuming :set nocp).  If you

runtime/doc/print.txt

@@ -111,10 +111,9 @@ not recognized by Vim will just be converted to lower case and underscores
 replaced with '-' signs.
 
 If 'printencoding' is empty or Vim cannot find the file then it will use
-'encoding' (if Vim is compiled with |+multi_byte| and it is set an 8-bit
-encoding) to find the print character encoding file.  If Vim is unable to find
-a character encoding file then it will use the "latin1" print character
-encoding file.
+'encoding' (if it is set an 8-bit encoding) to find the print character
+encoding file.  If Vim is unable to find a character encoding file then it
+will use the "latin1" print character encoding file.
 
 When 'encoding' is set to a multi-byte encoding, Vim will try to convert
 characters to the printing encoding for printing (if 'printencoding' is empty

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 8.1.  Last change: 2018 May 01
+*quickfix.txt*  For Vim version 8.1.  Last change: 2019 Jan 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -56,6 +56,7 @@ A location list is a window-local quickfix list. You get one after commands
 like `:lvimgrep`, `:lgrep`, `:lhelpgrep`, `:lmake`, etc., which create a
 location list instead of a quickfix list as the corresponding `:vimgrep`,
 `:grep`, `:helpgrep`, `:make` do.
+						*location-list-file-window*
 A location list is associated with a window and each window can have a
 separate location list.  A location list can be associated with only one
 window.  The location list is independent of the quickfix list.
@@ -110,14 +111,14 @@ processing a quickfix or location list command, it will be aborted.
 :[count]lne[xt][!]	Same as ":cnext", except the location list for the
 			current window is used instead of the quickfix list.
 
-:[count]cN[ext][!]			*:cp* *:cprevious* *:cN* *:cNext*
+:[count]cN[ext][!]		*:cp* *:cprevious*  *:cprev* *:cN* *:cNext*
 :[count]cp[revious][!]	Display the [count] previous error in the list that
 			includes a file name.  If there are no file names at
 			all, go to the [count] previous error.  See |:cc| for
 			[!] and 'switchbuf'.
 
 
-:[count]lN[ext][!]			*:lp* *:lprevious* *:lN* *:lNext*
+:[count]lN[ext][!]		*:lp* *:lprevious* *:lprev* *:lN* *:lNext*
 :[count]lp[revious][!]	Same as ":cNext" and ":cprevious", except the location
 			list for the current window is used instead of the
 			quickfix list.
@@ -363,6 +364,23 @@ modify the title of a quickfix and location list respectively. Examples: >
 	echo getqflist({'title' : 1})
 	call setloclist(3, [], 'a', {'title' : 'Cmd output'})
 	echo getloclist(3, {'title' : 1})
+<
+							*quickfix-index*
+When you jump to a quickfix/location list entry using any of the quickfix
+commands (e.g. |:cc|, |:cnext|, |:cprev|, etc.), that entry becomes the
+currently selected entry. The index of the currently selected entry in a
+quickfix/location list can be obtained using the getqflist()/getloclist()
+functions. Examples: >
+	echo getqflist({'idx' : 0}).idx
+	echo getqflist({'id' : qfid, 'idx' : 0}).idx
+	echo getloclist(2, {'idx' : 0}).idx
+<
+For a new quickfix list, the first entry is selected and the index is 1.  Any
+entry in any quickfix/location list can be set as the currently selected entry
+using the setqflist() function. Examples: >
+	call setqflist([], 'a', {'idx' : 12})
+	call setqflist([], 'a', {'id' : qfid, 'idx' : 7})
+	call setloclist(1, [], 'a', {'idx' : 7})
 <
 							*quickfix-size*
 You can get the number of entries (size) in a quickfix and a location list
@@ -478,6 +496,7 @@ EXECUTE A COMMAND IN ALL THE BUFFERS IN QUICKFIX OR LOCATION LIST:
 			second quickfix window.  If [height] is given the
 			existing window will be resized to it.
 
+							*quickfix-buffer*
 			The window will contain a special buffer, with
 			'buftype' equal to "quickfix".  Don't change this!
 			The window will have the w:quickfix_title variable set
@@ -486,7 +505,11 @@ EXECUTE A COMMAND IN ALL THE BUFFERS IN QUICKFIX OR LOCATION LIST:
 			status line if the value of 'statusline' is adjusted
 			properly. Whenever this buffer is modified by a
 			quickfix command or function, the |b:changedtick|
-			variable is incremented.
+			variable is incremented.  You can get the number of
+			this buffer using the getqflist() and getloclist()
+			functions by passing the 'qfbufnr' item. For a
+			location list, this buffer is wiped out when the
+			location list is removed.
 
 							*:lop* *:lopen*
 :lop[en] [height]	Open a window to show the location list for the
@@ -652,11 +675,20 @@ using these functions are below:
     " get the quickfix list window id
     :echo getqflist({'winid' : 0}).winid
 
+    " get the quickfix list window buffer number
+    :echo getqflist({'qfbufnr' : 0}).qfbufnr
+
     " get the context of the current location list
     :echo getloclist(0, {'context' : 0}).context
 
     " get the location list window id of the third window
     :echo getloclist(3, {'winid' : 0}).winid
+
+    " get the location list window buffer number of the third window
+    :echo getloclist(3, {'qfbufnr' : 0}).qfbufnr
+
+    " get the file window id of a location list window (winnr: 4)
+    :echo getloclist(4, {'filewinid' : 0}).filewinid
 <
 							*setqflist-examples*
 The |setqflist()| and |setloclist()| functions can be used to set the various
@@ -671,6 +703,9 @@ using these functions are below:
     " set the title of the current quickfix list
     :call setqflist([], 'a', {'title' : 'Mytitle'})
 
+    " change the current entry in the list specified by an identifier
+    :call setqflist([], 'a', {'id' : qfid, 'idx' : 10})
+
     " set the context of a quickfix list specified by an identifier
     :call setqflist([], 'a', {'id' : qfid, 'context' : {'val' : 100}})
 
@@ -898,7 +933,7 @@ commands can be combined to create a NewGrep command: >
 			'smartcase' is not used.
 			If {pattern} is empty (e.g. // is specified), the last
 			used search pattern is used. |last-pattern|
-
+:{count}vim[grep] ...
 			When a number is put before the command this is used
 			as the maximum number of matches to find.  Use
 			":1vimgrep pattern file" to find only the first.
@@ -1551,6 +1586,22 @@ The backslashes before the pipe character are required to avoid it to be
 recognized as a command separator.  The backslash before each space is
 required for the set command.
 
+				    *cfilter-plugin* *:Cfilter* *:Lfilter*
+If you have too many matching messages, you can use the cfilter plugin to
+reduce the number of entries.  Load the plugin with: >
+   packadd cfilter
+
+Then you can use these command: >
+   :Cfilter[!] /{pat}/
+   :Lfilter[!] /{pat}/
+
+:Cfilter creates a new quickfix list from entries matching {pat} in the
+current quickfix list. Both the file name and the text of the entries are
+matched against {pat}. If ! is supplied, then entries not matching {pat} are
+used.
+
+:Lfilter does the same as :Cfilter but operates on the current location list.
+
 =============================================================================
 8. The directory stack				*quickfix-directory-stack*
 

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 8.1.  Last change: 2018 Apr 18
+*quickref.txt*  For Vim version 8.1.  Last change: 2019 Feb 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -600,7 +600,6 @@ In Insert or Command-line mode:
 Short explanation of each option:		*option-list*
 'aleph'		  'al'	    ASCII code of the letter Aleph (Hebrew)
 'allowrevins'	  'ari'     allow CTRL-_ in Insert and Command-line mode
-'altkeymap'	  'akm'     for default second language (Farsi/Hebrew)
 'ambiwidth'	  'ambw'    what to do with Unicode chars of ambiguous width
 'antialias'	  'anti'    Mac OS X: use smooth, antialiased fonts
 'autochdir'	  'acd'     change directory to the file in the current window
@@ -700,7 +699,6 @@ Short explanation of each option:		*option-list*
 'filetype'	  'ft'	    type of file, used for autocommands
 'fillchars'	  'fcs'     characters to use for displaying special items
 'fixendofline'	  'fixeol'  make sure last line in file has <EOL>
-'fkmap'		  'fk'	    Farsi keyboard mapping
 'foldclose'	  'fcl'     close a fold when the cursor leaves it
 'foldcolumn'	  'fdc'     width of the column used to indicate folds
 'foldenable'	  'fen'     set to display all folds open
@@ -930,6 +928,7 @@ Short explanation of each option:		*option-list*
 'termwinkey'	  'twk'	    key that precedes a Vim command in a terminal
 'termwinscroll'   'twsl'    max number of scrollback lines in a terminal window
 'termwinsize'	  'tws'	    size of a terminal window
+'termwintype'	  'twt'	    MS-Windows: type of pty to use for terminal window
 'terse'			    shorten some messages
 'textauto'	  'ta'	    obsolete, use 'fileformats'
 'textmode'	  'tx'	    obsolete, use 'fileformat'

runtime/doc/recover.txt

@@ -28,6 +28,9 @@ You can see the name of the current swap file being used with the command:
 
 	:sw[apname]					*:sw* *:swapname*
 
+Or you can use the |swapname()| function, which also allows for seeing the
+swap file name of other buffers.
+
 The name of the swap file is normally the same as the file you are editing,
 with the extension ".swp".
 - On Unix, a '.' is prepended to swap file names in the same directory as the

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 8.1.  Last change: 2018 Mar 04
+*repeat.txt*    For Vim version 8.1.  Last change: 2018 Dec 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -323,8 +323,6 @@ For writing a Vim script, see chapter 41 of the user manual |usr_41.txt|.
 				set encoding=utf-8
 				scriptencoding utf-8
 <
-			When compiled without the |+multi_byte| feature this
-			command is ignored.
 			{not in Vi}
 
 						*:scr* *:scriptnames*
@@ -334,6 +332,12 @@ For writing a Vim script, see chapter 41 of the user manual |usr_41.txt|.
 			{not in Vi} {not available when compiled without the
 			|+eval| feature}
 
+:scr[iptnames][!] {scriptId}			*:script*
+			Edit script {scriptId}.  Although ":scriptnames name"
+			works, using ":script name" is recommended.
+			When the current buffer can't be |abandon|ed and the !
+			is not present, the command fails.
+
 						*:fini* *:finish* *E168*
 :fini[sh]		Stop sourcing a script.  Can only be used in a Vim
 			script file.  This is a quick way to skip the rest of
@@ -465,6 +469,16 @@ flag when defining the function, it is not relevant when executing it. >
    .
    :endfunction
    :set cpo-=C
+<
+					*line-continuation-comment*
+To add a comment in between the lines start with '"\ '.  Notice the space
+after the backslash.  Example: >
+	let array = [
+		"\ first entry comment
+		\ 'first',
+		"\ second entry comment
+		\ 'second',
+		\ ]
 
 Rationale:
 	Most programs work with a trailing backslash to indicate line
@@ -473,6 +487,14 @@ Rationale:
 		:map xx  asdf\
 <	Therefore the unusual leading backslash is used.
 
+	Starting a comment in a continuation line results in all following
+	continuation lines to be part of the comment.  Since it was like this
+	for a long time, when making it possible to add a comment halfway a
+	sequence of continuation lines, it was not possible to use \", since
+	that was a valid continuation line.  Using '"\ ' comes closest, even
+	though it may look a bit weird.  Requiring the space after the
+	backslash is to make it very unlikely this is a normal comment line.
+
 ==============================================================================
 5. Using Vim packages					*packages*
 

runtime/doc/russian.txt

@@ -55,8 +55,7 @@ automatic installs.  Vim also needs to be compiled with |+gettext| feature for
 user interface items translations to work.
 
 After downloading an archive from RuVim project, unpack it into your
-$VIMRUNTIME directory.  We recommend using UTF-8 archive, if your version of
-Vim is compiled with |+multi_byte| feature enabled.
+$VIMRUNTIME directory.  We recommend using UTF-8 archive.
 
 In order to use the Russian documentation, make sure you have set the
 'helplang' option to "ru".

runtime/doc/sign.txt

@@ -1,4 +1,4 @@
-*sign.txt*      For Vim version 8.1.  Last change: 2016 Aug 17
+*sign.txt*      For Vim version 8.1.  Last change: 2019 Jan 17
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -31,7 +31,7 @@ terminal emulator.
 Signs and highlights are not useful just for debuggers.  Sun's Visual
 WorkShop uses signs and highlights to mark build errors and SourceBrowser
 hits.  Additionally, the debugger supports 8 to 10 different signs and
-highlight colors. |workshop|  Same for Netbeans |netbeans|.
+highlight colors, see |NetBeans|.
 
 There are two steps in using signs:
 
@@ -43,6 +43,7 @@ There are two steps in using signs:
    displayed.  A defined sign can be placed several times in different lines
    and files.
 
+							*sign-column*
 When signs are defined for a file, Vim will automatically add a column of two
 characters to display them in.  When the last sign is unplaced the column
 disappears again.  This behavior can be changed with the 'signcolumn' option.
@@ -51,6 +52,34 @@ The color of the column is set with the SignColumn group |hl-SignColumn|.
 Example to set the color: >
 
 	:highlight SignColumn guibg=darkgrey
+<
+							*sign-identifier*
+Each placed sign is identified by a number called the sign identifier. This
+identifier is used to jump to the sign or to remove the sign. The identifier
+is assigned when placing the sign using the |:sign-place| command or the
+|sign_place()| function. Each sign identifier should be a unique number. If
+multiple placed signs use the same identifier, then jumping to or removing a
+sign becomes unpredictable. To avoid overlapping identifiers, sign groups can
+be used. The |sign_place()| function can be called with a zero sign identifier
+to allocate the next available identifier.
+
+							*sign-group*
+Each placed sign can be assigned to either the global group or a named group.
+When placing a sign, if a group name is not supplied, or an empty string is
+used, then the sign is placed in the global group. Otherwise the sign is
+placed in the named group. The sign identifier is unique within a group. The
+sign group allows Vim plugins to use unique signs without interfering with
+other plugins using signs.
+
+							*sign-priority*
+Each placed sign is assigned a priority value. When multiple signs are placed
+on the same line, the attributes of the sign with the highest priority is used
+independent of the sign group. The default priority for a sign is 10. The
+priority is assigned at the time of placing a sign.
+
+When the line on which the sign is placed is deleted, the sign is moved to the
+next line (or the last line of the buffer, if there is no next line).  When
+the delete is undone the sign does not move back.
 
 ==============================================================================
 2. Commands					*sign-commands* *:sig* *:sign*
@@ -69,10 +98,12 @@ comment.  If you do need that, use the |:execute| command.
 
 DEFINING A SIGN.			*:sign-define* *E255* *E160* *E612*
 
+See |sign_define()| for the equivalent Vim script function.
+
 :sign define {name} {argument}...
 		Define a new sign or set attributes for an existing sign.
 		The {name} can either be a number (all digits) or a name
-		starting with a non-digit.  Leading digits are ignored, thus
+		starting with a non-digit.  Leading zeros are ignored, thus
 		"0012", "012" and "12" are considered the same name.
 		About 120 different signs can be defined.
 
@@ -106,13 +137,18 @@ DEFINING A SIGN.			*:sign-define* *E255* *E160* *E612*
 
 DELETING A SIGN						*:sign-undefine* *E155*
 
+See |sign_undefine()| for the equivalent Vim script function.
+
 :sign undefine {name}
 		Deletes a previously defined sign.  If signs with this {name}
 		are still placed this will cause trouble.
 
 
+
 LISTING SIGNS						*:sign-list* *E156*
 
+See |sign_getdefined()| for the equivalent Vim script function.
+
 :sign list	Lists all defined signs and their attributes.
 
 :sign list {name}
@@ -121,6 +157,8 @@ LISTING SIGNS						*:sign-list* *E156*
 
 PLACING SIGNS						*:sign-place* *E158*
 
+See |sign_place()| for the equivalent Vim script function.
+
 :sign place {id} line={lnum} name={name} file={fname}
 		Place sign defined as {name} at line {lnum} in file {fname}.
 							*:sign-fname*
@@ -136,8 +174,28 @@ PLACING SIGNS						*:sign-place* *E158*
 		to be done several times and making changes may not work as
 		expected).
 
-:sign place {id} line={lnum} name={name} buffer={nr}
-		Same, but use buffer {nr}.
+		The following optional sign attributes can be specified before
+		"file=":
+			group={group}	Place sign in sign group {group}
+			priority={prio}	Assign priority {prio} to sign
+
+		By default, the sign is placed in the global sign group.
+
+		By default, the sign is assigned a default priority of 10. To
+		assign a different priority value, use "priority={prio}" to
+		specify a value. The priority is used to determine the
+		highlight group used when multiple signs are placed on the
+		same line.
+
+		Examples: >
+			:sign place 5 line=3 name=sign1 file=a.py
+			:sign place 6 group=g2 line=2 name=sign2 file=x.py
+			:sign place 9 group=g2 priority=50 line=5
+							\ name=sign1 file=a.py
+<
+:sign place {id} line={lnum} name={name} [buffer={nr}]
+		Same, but use buffer {nr}.  If the buffer argument is not
+		given, place the sign in the current buffer.
 
 							*E885*
 :sign place {id} name={name} file={fname}
@@ -146,50 +204,126 @@ PLACING SIGNS						*:sign-place* *E158*
 		This can be used to change the displayed sign without moving
 		it (e.g., when the debugger has stopped at a breakpoint).
 
-:sign place {id} name={name} buffer={nr}
-		Same, but use buffer {nr}.
+		The optional "group={group}" attribute can be used before
+		"file=" to select a sign in a particular group.
+
+:sign place {id} name={name} [buffer={nr}]
+		Same, but use buffer {nr}.  If the buffer argument is not
+		given, use the current buffer.
 
 
 REMOVING SIGNS						*:sign-unplace* *E159*
 
+See |sign_unplace()| for the equivalent Vim script function.
+
 :sign unplace {id} file={fname}
 		Remove the previously placed sign {id} from file {fname}.
 		See remark above about {fname} |:sign-fname|.
 
+:sign unplace {id} group={group} file={fname}
+		Same but remove the sign {id} in sign group {group}.
+
+:sign unplace {id} group=* file={fname}
+		Same but remove the sign {id} from all the sign groups.
+
 :sign unplace * file={fname}
 		Remove all placed signs in file {fname}.
 
+:sign unplace * group={group} file={fname}
+		Remove all placed signs in group {group} from file {fname}.
+
+:sign unplace * group=* file={fname}
+		Remove all placed signs in all the groups from file {fname}.
+
 :sign unplace {id} buffer={nr}
 		Remove the previously placed sign {id} from buffer {nr}.
 
+:sign unplace {id} group={group} buffer={nr}
+		Remove the previously placed sign {id} in group {group} from
+		buffer {nr}.
+
+:sign unplace {id} group=* buffer={nr}
+		Remove the previously placed sign {id} in all the groups from
+		buffer {nr}.
+
 :sign unplace * buffer={nr}
 		Remove all placed signs in buffer {nr}.
 
+:sign unplace * group={group} buffer={nr}
+		Remove all placed signs in group {group} from buffer {nr}.
+
+:sign unplace * group=* buffer={nr}
+		Remove all placed signs in all the groups from buffer {nr}.
+
 :sign unplace {id}
 		Remove the previously placed sign {id} from all files it
 		appears in.
 
+:sign unplace {id} group={group}
+		Remove the previously placed sign {id} in group {group} from
+		all files it appears in.
+
+:sign unplace {id} group=*
+		Remove the previously placed sign {id} in all the groups from
+		all the files it appears in.
+
 :sign unplace *
-		Remove all placed signs.
+		Remove all placed signs in the global group from all the files.
+
+:sign unplace * group={group}
+		Remove all placed signs in group {group} from all the files.
+
+:sign unplace * group=*
+		Remove all placed signs in all the groups from all the files.
 
 :sign unplace
-		Remove the placed sign at the cursor position.
+		Remove a placed sign at the cursor position. If multiple signs
+		are placed in the line, then only one is removed.
+
+:sign unplace group={group}
+		Remove a placed sign in group {group} at the cursor
+		position.
+
+:sign unplace group=*
+		Remove a placed sign in any group at the cursor position.
 
 
 LISTING PLACED SIGNS					*:sign-place-list*
 
+See |sign_getplaced()| for the equivalent Vim script function.
+
 :sign place file={fname}
 		List signs placed in file {fname}.
 		See remark above about {fname} |:sign-fname|.
 
+:sign place group={group} file={fname}
+		List signs in group {group} placed in file {fname}.
+
+:sign place group=* file={fname}
+		List signs in all the groups placed in file {fname}.
+
 :sign place buffer={nr}
 		List signs placed in buffer {nr}.
 
-:sign place	List placed signs in all files.
+:sign place group={group} buffer={nr}
+		List signs in group {group} placed in buffer {nr}.
+
+:sign place group=* buffer={nr}
+		List signs in all the groups placed in buffer {nr}.
+
+:sign place	List placed signs in the global group in all files.
+
+:sign place group={group}
+		List placed signs with sign group {group} in all files.
+
+:sign place group=*
+		List placed signs in all sign groups in all files.
 
 
 JUMPING TO A SIGN					*:sign-jump* *E157*
 
+See |sign_jump()| for the equivalent Vim script function.
+
 :sign jump {id} file={fname}
 		Open the file {fname} or jump to the window that contains
 		{fname} and position the cursor at sign {id}.
@@ -197,9 +331,16 @@ JUMPING TO A SIGN					*:sign-jump* *E157*
 		If the file isn't displayed in window and the current file can
 		not be |abandon|ed this fails.
 
-:sign jump {id} buffer={nr}					*E934*
+:sign jump {id} group={group} file={fname}
+		Same but jump to the sign in group {group}
+
+:sign jump {id} [buffer={nr}]					*E934*
 		Same, but use buffer {nr}.  This fails if buffer {nr} does not
-		have a name.
+		have a name. If the buffer argument is not given, use the
+		current buffer.
+
+:sign jump {id} group={group} [buffer={nr}]
+		Same but jump to the sign in group {group}
 
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/spell.txt

@@ -1,4 +1,4 @@
-*spell.txt*	For Vim version 8.1.  Last change: 2018 Mar 29
+*spell.txt*	For Vim version 8.1.  Last change: 2019 Jan 19
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -312,25 +312,25 @@ Exceptions:
   spell file is used.
 
 For example, with these values:
-	'runtimepath' is "~/.vim,/usr/share/vim70,~/.vim/after"
+	'runtimepath' is "~/.vim,/usr/share/vim81,~/.vim/after"
 	'encoding'    is "iso-8859-2"
 	'spelllang'   is "pl"
 
 Vim will look for:
 1. ~/.vim/spell/pl.iso-8859-2.spl
-2. /usr/share/vim70/spell/pl.iso-8859-2.spl
+2. /usr/share/vim81/spell/pl.iso-8859-2.spl
 3. ~/.vim/spell/pl.iso-8859-2.add.spl
-4. /usr/share/vim70/spell/pl.iso-8859-2.add.spl
+4. /usr/share/vim81/spell/pl.iso-8859-2.add.spl
 5. ~/.vim/after/spell/pl.iso-8859-2.add.spl
 
 This assumes 1. is not found and 2. is found.
 
 If 'encoding' is "latin1" Vim will look for:
 1. ~/.vim/spell/pl.latin1.spl
-2. /usr/share/vim70/spell/pl.latin1.spl
+2. /usr/share/vim81/spell/pl.latin1.spl
 3. ~/.vim/after/spell/pl.latin1.spl
 4. ~/.vim/spell/pl.ascii.spl
-5. /usr/share/vim70/spell/pl.ascii.spl
+5. /usr/share/vim81/spell/pl.ascii.spl
 6. ~/.vim/after/spell/pl.ascii.spl
 
 This assumes none of them are found (Polish doesn't make sense when leaving
@@ -577,7 +577,7 @@ When the Myspell files are updated you can merge the differences:
 	vimdiff xx_YY.orig.dic xx_YY.new.dic
 3. Take over the changes you like in xx_YY.dic.
    You may also need to change xx_YY.aff.
-4. Rename xx_YY.new.dic to xx_YY.orig.dic and xx_YY.new.aff to xx_YY.new.aff.
+4. Rename xx_YY.new.dic to xx_YY.orig.dic and xx_YY.new.aff to xx_YY.orig.aff.
 
 
 SPELL FILE VERSIONS					*E770* *E771* *E772*
@@ -1582,6 +1582,10 @@ CHECKCOMPOUNDTRIPLE  (Hunspell)			*spell-CHECKCOMPOUNDTRIPLE*
 		Forbid three identical characters when compounding.  Not
 		supported.
 
+CHECKSHARPS  (Hunspell))			*spell-CHECKSHARPS*
+		SS letter pair in uppercased (German) words may be upper case
+		sharp s (ß). Not supported.
+
 COMPLEXPREFIXES  (Hunspell)				*spell-COMPLEXPREFIXES*
 		Enables using two prefixes.  Not supported.
 
@@ -1595,12 +1599,21 @@ COMPOUNDFIRST	(Hunspell)				*spell-COMPOUNDFIRST*
 		Use COMPOUNDRULE instead. |spell-COMPOUNDRULE|
 
 COMPOUNDBEGIN	(Hunspell)				*spell-COMPOUNDBEGIN*
+		Words signed with COMPOUNDBEGIN may be first elements in
+		compound words.
+		Use COMPOUNDRULE instead. |spell-COMPOUNDRULE|
+
+COMPOUNDLAST	(Hunspell)				*spell-COMPOUNDLAST*
+		Words signed with COMPOUNDLAST may be last elements in
+		compound words.
 		Use COMPOUNDRULE instead. |spell-COMPOUNDRULE|
 
 COMPOUNDEND	(Hunspell)				*spell-COMPOUNDEND*
-		Use COMPOUNDRULE instead. |spell-COMPOUNDRULE|
+		Probably the same as COMPOUNDLAST
 
 COMPOUNDMIDDLE	(Hunspell)				*spell-COMPOUNDMIDDLE*
+		Words signed with COMPOUNDMIDDLE may be middle elements in
+		compound words.
 		Use COMPOUNDRULE instead. |spell-COMPOUNDRULE|
 
 COMPOUNDRULES	(Hunspell)				*spell-COMPOUNDRULES*

runtime/doc/starting.txt

@@ -1,4 +1,4 @@
-*starting.txt*  For Vim version 8.1.  Last change: 2018 May 05
+*starting.txt*  For Vim version 8.1.  Last change: 2019 Feb 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -248,12 +248,18 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 		changes and writing.
 		{not in Vi}
 
-						*-Z* *restricted-mode* *E145*
+					*-Z* *restricted-mode* *E145* *E981*
 -Z		Restricted mode.  All commands that make use of an external
 		shell are disabled.  This includes suspending with CTRL-Z,
-		":sh", filtering, the system() function, backtick expansion,
-		delete(), rename(), mkdir(), writefile(), libcall(),
-		job_start(), etc.
+		":sh", filtering, the system() function, backtick expansion
+		and libcall().
+		Also disallowed are delete(), rename(), mkdir(), job_start(),
+		etc.
+		Interfaces, such as Python, Ruby and Lua, are also disabled,
+		since they could be used to execute shell commands.  Perl uses
+		the Safe module.
+		Note that the user may still find a loophole to execute a
+		shell command, it has only been made difficult.
 		{not in Vi}
 
 							*-g*
@@ -315,9 +321,8 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 		and exits.)  {not in Vi}
 
 							*-F*
--F		Farsi mode.  Sets the 'fkmap' and 'rightleft' options on.
-		(Only when compiled with |+rightleft| and |+farsi| features,
-		otherwise Vim gives an error message and exits.)  {not in Vi}
+-F		This was used for Farsi mode, which has been removed.
+		See |farsi.txt|.
 
 							*-H*
 -H		Hebrew mode.  Sets the 'hkmap' and 'rightleft' options on.
@@ -515,7 +520,7 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 --clean		Similar to "-u DEFAULTS -U NONE -i NONE":
 		- initializations from files and environment variables is
 		  skipped
-		-'runtimepath'and 'packpath' are set to exclude home
+		- 'runtimepath' and 'packpath' are set to exclude home
 		  directory entries (does not happen with -u DEFAULTS).
 		- the |defaults.vim| script is loaded, which implies
 		  'nocompatible': use Vim defaults

runtime/doc/syntax.txt

@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 8.1.  Last change: 2018 Apr 30
+*syntax.txt*	For Vim version 8.1.  Last change: 2018 Dec 27
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -23,21 +23,22 @@ In the User Manual:
 1.  Quick start			|:syn-qstart|
 2.  Syntax files		|:syn-files|
 3.  Syntax loading procedure	|syntax-loading|
-4.  Syntax file remarks		|:syn-file-remarks|
-5.  Defining a syntax		|:syn-define|
-6.  :syntax arguments		|:syn-arguments|
-7.  Syntax patterns		|:syn-pattern|
-8.  Syntax clusters		|:syn-cluster|
-9.  Including syntax files	|:syn-include|
-10. Synchronizing		|:syn-sync|
-11. Listing syntax items	|:syntax|
-12. Highlight command		|:highlight|
-13. Linking groups		|:highlight-link|
-14. Cleaning up			|:syn-clear|
-15. Highlighting tags		|tag-highlight|
-16. Window-local syntax		|:ownsyntax|
-17. Color xterms		|xterm-color|
-18. When syntax is slow		|:syntime|
+4.  Converting to HTML		|2html.vim|
+5.  Syntax file remarks		|:syn-file-remarks|
+6.  Defining a syntax		|:syn-define|
+7.  :syntax arguments		|:syn-arguments|
+8.  Syntax patterns		|:syn-pattern|
+9.  Syntax clusters		|:syn-cluster|
+10. Including syntax files	|:syn-include|
+11. Synchronizing		|:syn-sync|
+12. Listing syntax items	|:syntax|
+13. Highlight command		|:highlight|
+14. Linking groups		|:highlight-link|
+15. Cleaning up			|:syn-clear|
+16. Highlighting tags		|tag-highlight|
+17. Window-local syntax		|:ownsyntax|
+18. Color xterms		|xterm-color|
+19. When syntax is slow		|:syntime|
 
 {Vi does not have any of these commands}
 
@@ -368,20 +369,9 @@ Upon loading a file, Vim finds the relevant syntax file as follows:
 	syntax.
 
 ==============================================================================
-4. Syntax file remarks					*:syn-file-remarks*
+4. Conversion to HTML				*2html.vim* *convert-to-HTML*
 
-						*b:current_syntax-variable*
-Vim stores the name of the syntax that has been loaded in the
-"b:current_syntax" variable.  You can use this if you want to load other
-settings, depending on which syntax is active.	Example: >
-   :au BufReadPost * if b:current_syntax == "csh"
-   :au BufReadPost *   do-some-things
-   :au BufReadPost * endif
-
-
-2HTML						*2html.vim* *convert-to-HTML*
-
-This is not a syntax file itself, but a script that converts the current
+2html is not a syntax file itself, but a script that converts the current
 window into HTML. Vim opens a new window in which it builds the HTML file.
 
 After you save the resulting file, you can view it with any browser. The
@@ -671,12 +661,12 @@ the rendered page generated by 2html.vim.
    :let g:html_no_pre = 1
 <
 							  *g:html_expand_tabs*
-Default: 1 if 'tabstop' is 8, 'expandtab' is 0, and no fold column or line
-		numbers occur in the generated HTML;
-	 0 otherwise.
-When 0, <Tab> characters in the buffer text are replaced with an appropriate
+Default: 0 if 'tabstop' is 8, 'expandtab' is 0, 'vartabstop' is not in use,
+	       and no fold column or line numbers occur in the generated HTML;
+	 1 otherwise.
+When 1, <Tab> characters in the buffer text are replaced with an appropriate
 number of space characters, or &nbsp; references if |g:html_no_pre| is 1.
-When 1, if |g:html_no_pre| is 0 or unset, <Tab> characters in the buffer text
+When 0, if |g:html_no_pre| is 0 or unset, <Tab> characters in the buffer text
 are included as-is in the generated HTML. This is useful for when you want to
 allow copy and paste from a browser without losing the actual whitespace in
 the source document. Note that this can easily break text alignment and
@@ -773,6 +763,18 @@ When 1, generate XHTML 1.0 instead (XML compliant HTML).
 >
     :let g:html_use_xhtml = 1
 <
+==============================================================================
+5. Syntax file remarks					*:syn-file-remarks*
+
+						*b:current_syntax-variable*
+Vim stores the name of the syntax that has been loaded in the
+"b:current_syntax" variable.  You can use this if you want to load other
+settings, depending on which syntax is active.	Example: >
+   :au BufReadPost * if b:current_syntax == "csh"
+   :au BufReadPost *   do-some-things
+   :au BufReadPost * endif
+
+
 
 ABEL						*abel.vim* *ft-abel-syntax*
 
@@ -939,6 +941,9 @@ to the respective variable.  Example: >
 To disable them use ":unlet".  Example: >
 	:unlet c_comment_strings
 
+An alternative is to switch to the C++ highlighting: >
+	:set filetype=cpp
+
 Variable		Highlight ~
 *c_gnu*			GNU gcc specific items
 *c_comment_strings*	strings and numbers inside a comment
@@ -1265,7 +1270,7 @@ doxygen_javadoc_autobrief	1	Set to 0 to disable javadoc autobrief
 doxygen_end_punctuation		'[.]'	Set to regexp match for the ending
 					punctuation of brief
 
-There are also some hilight groups worth mentioning as they can be useful in
+There are also some highlight groups worth mentioning as they can be useful in
 configuration.
 
 Highlight			Effect ~
@@ -2641,6 +2646,48 @@ Any combination of these three variables is legal, but might highlight more
 commands than are actually available to you by the game.
 
 
+R							*r.vim* *ft-r-syntax*
+
+The parsing of R code for syntax highlight starts 40 lines backwards, but you
+can set a different value in your |vimrc|. Example: >
+	let r_syntax_minlines = 60
+
+You can also turn off syntax highlighting of ROxygen: >
+	let r_syntax_hl_roxygen = 0
+
+enable folding of code delimited by parentheses, square brackets and curly
+braces: >
+	let r_syntax_folding = 1
+
+and highlight as functions all keywords followed by an opening parenthesis: >
+	let r_syntax_fun_pattern = 1
+
+
+R MARKDOWN					*rmd.vim* *ft-rmd-syntax*
+
+To disable syntax highlight of YAML header, add to your |vimrc|: >
+	let rmd_syn_hl_yaml = 0
+
+To disable syntax highlighting of citation keys: >
+	let rmd_syn_hl_citations = 0
+
+To highlight R code in knitr chunk headers: >
+	let rmd_syn_hl_chunk = 1
+
+By default, chunks of R code will be highlighted following the rules of R
+language. If you want proper syntax highlighting of chunks of other languages,
+you should add them to either `markdown_fenced_languages` or
+`rmd_fenced_languages`. For example to properly highlight both R and Python,
+you may add this to your |vimrc|: >
+	let rmd_fenced_languages = ['r', 'python']
+
+
+R RESTRUCTURED TEXT				*rrst.vim* *ft-rrst-syntax*
+
+To highlight R code in knitr chunk headers, add to your |vimrc|: >
+	let rrst_syn_hl_chunk = 1
+
+
 READLINE				*readline.vim* *ft-readline-syntax*
 
 The readline library is primarily used by the BASH shell, which adds quite a
@@ -2655,9 +2702,29 @@ later, and part earlier) adds.
 
 RESTRUCTURED TEXT			*rst.vim* *ft-rst-syntax*
 
-You may set what syntax definitions should be used for code blocks via >
+Syntax highlighting is enabled for code blocks within the document for a
+select number of file types.  See $VIMRUNTIME/syntax/rst.vim for the default
+syntax list.
+
+To set a user-defined list of code block syntax highlighting: >
 	let rst_syntax_code_list = ['vim', 'lisp', ...]
-<
+
+To assign multiple code block types to a single syntax, define
+`rst_syntax_code_list` as a mapping: >
+	let rst_syntax_code_list = {
+		\ 'cpp' = ['cpp', 'c++'],
+                \ 'bash' = ['bash', 'sh'],
+		...
+	}
+
+To use color highlighting for emphasis text: >
+	let rst_use_emphasis_colors = 1
+
+To enable folding of sections: >
+	let rst_fold_enabled = 1
+
+Note that folding can cause performance issues on some platforms.
+
 
 REXX						*rexx.vim* *ft-rexx-syntax*
 
@@ -3169,6 +3236,12 @@ by syntax/tex.vim.  Please consider uploading any extensions that you write,
 which typically would go in $HOME/after/syntax/tex/[pkgname].vim, to
 http://vim.sf.net/.
 
+I've included some support for various popular packages on my website: >
+
+	http://www.drchip.org/astronaut/vim/index.html#LATEXPKGS
+<
+The syntax files there go into your .../after/syntax/tex/ directory.
+
 					*tex-error* *g:tex_no_error*
  Tex: Excessive Error Highlighting? ~
 
@@ -3433,7 +3506,7 @@ The syntax script for zsh allows for syntax-based folding: >
 	:let g:zsh_fold_enable = 1
 
 ==============================================================================
-5. Defining a syntax					*:syn-define* *E410*
+6. Defining a syntax					*:syn-define* *E410*
 
 Vim understands three types of syntax items:
 
@@ -3792,7 +3865,7 @@ DEFINING REGIONS	*:syn-region* *:syn-start* *:syn-skip* *:syn-end*
 The maximum number of syntax groups is 19999.
 
 ==============================================================================
-6. :syntax arguments					*:syn-arguments*
+7. :syntax arguments					*:syn-arguments*
 
 The :syntax commands that define syntax items take a number of arguments.
 The common ones are explained here.  The arguments may be given in any order
@@ -4113,7 +4186,7 @@ IMPLICIT CONCEAL					*:syn-conceal-implicit*
 	Show either "syntax conceal on" or "syntax conceal off" (translated).
 
 ==============================================================================
-7. Syntax patterns				*:syn-pattern* *E401* *E402*
+8. Syntax patterns				*:syn-pattern* *E401* *E402*
 
 In the syntax commands, a pattern must be surrounded by two identical
 characters.  This is like it works for the ":s" command.  The most common to
@@ -4291,7 +4364,7 @@ Note that only matches within a single line can be used.  Multi-line matches
 cannot be referred to.
 
 ==============================================================================
-8. Syntax clusters					*:syn-cluster* *E400*
+9. Syntax clusters					*:syn-cluster* *E400*
 
 :sy[ntax] cluster {cluster-name} [contains={group-name}..]
 				 [add={group-name}..]
@@ -4337,7 +4410,7 @@ This also has implications for nested clusters: >
 The maximum number of clusters is 9767.
 
 ==============================================================================
-9. Including syntax files				*:syn-include* *E397*
+10. Including syntax files				*:syn-include* *E397*
 
 It is often useful for one language's syntax file to include a syntax file for
 a related language.  Depending on the exact relationship, this can be done in
@@ -4378,7 +4451,7 @@ two different ways:
 The maximum number of includes is 999.
 
 ==============================================================================
-10. Synchronizing				*:syn-sync* *E403* *E404*
+11. Synchronizing				*:syn-sync* *E403* *E404*
 
 Vim wants to be able to start redrawing in any position in the document.  To
 make this possible it needs to know the syntax state at the position where
@@ -4570,7 +4643,7 @@ You can clear specific sync patterns with: >
    :syntax sync clear {sync-group-name} ..
 
 ==============================================================================
-11. Listing syntax items		*:syntax* *:sy* *:syn* *:syn-list*
+12. Listing syntax items		*:syntax* *:sy* *:syn* *:syn-list*
 
 This command lists all the syntax items: >
 
@@ -4590,7 +4663,7 @@ Note that the ":syntax" command can be abbreviated to ":sy", although ":syn"
 is mostly used, because it looks better.
 
 ==============================================================================
-12. Highlight command			*:highlight* *:hi* *E28* *E411* *E415*
+13. Highlight command			*:highlight* *:hi* *E28* *E411* *E415*
 
 There are three types of highlight groups:
 - The ones used for specific languages.  For these the name starts with the
@@ -5083,7 +5156,7 @@ Tooltip		Current font, background and foreground of the tooltips.
 		set.
 
 ==============================================================================
-13. Linking groups		*:hi-link* *:highlight-link* *E412* *E413*
+14. Linking groups		*:hi-link* *:highlight-link* *E412* *E413*
 
 When you want to use the same highlighting for several syntax groups, you
 can do this more easily by linking the groups into one common highlight
@@ -5121,7 +5194,7 @@ Without the "default" in the C syntax file, the highlighting would be
 overruled when the syntax file is loaded.
 
 ==============================================================================
-14. Cleaning up						*:syn-clear* *E391*
+15. Cleaning up						*:syn-clear* *E391*
 
 If you want to clear the syntax stuff for the current buffer, you can use this
 command: >
@@ -5212,7 +5285,7 @@ syntax/syncolor.vim files are loaded:
 		them.
 
 ==============================================================================
-15. Highlighting tags					*tag-highlight*
+16. Highlighting tags					*tag-highlight*
 
 If you want to highlight all the tags in your file, you can use the following
 mappings.
@@ -5247,7 +5320,7 @@ And put these lines in your .vimrc: >
    autocmd BufRead,BufNewFile *.[ch] endif
 
 ==============================================================================
-16. Window-local syntax				*:ownsyntax*
+17. Window-local syntax				*:ownsyntax*
 
 Normally all windows on a buffer share the same syntax settings. It is
 possible, however, to set a particular window on a file to have its own
@@ -5277,7 +5350,7 @@ is loaded into that window or the file is reloaded.
 When splitting the window, the new window will use the original syntax.
 
 ==============================================================================
-17. Color xterms				*xterm-color* *color-xterm*
+18. Color xterms				*xterm-color* *color-xterm*
 
 Most color xterms have only eight colors.  If you don't get colors with the
 default setup, it should work with these lines in your .vimrc: >
@@ -5421,7 +5494,7 @@ that Setup / Font / Enable Bold is NOT enabled.
 
 
 ==============================================================================
-18. When syntax is slow						*:syntime*
+19. When syntax is slow						*:syntime*
 
 This is aimed at authors of a syntax file.
 

runtime/doc/tabpage.txt

@@ -243,7 +243,7 @@ REORDERING TAB PAGES:
 		Move the current tab page to after tab page N.  Use zero to
 		make the current tab page the first one.  N is counted before
 		the move, thus if the second tab is the current one,
-		`:tabmove 1`` and `:tabmove 2`  have no effect.
+		`:tabmove 1` and `:tabmove 2`  have no effect.
 		Without N the tab page is made the last one. >
 		    :.tabmove	" do nothing
 		    :-tabmove	" move the tab page to the left

runtime/doc/tags

@@ -1095,6 +1095,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'termwinkey'	options.txt	/*'termwinkey'*
 'termwinscroll'	options.txt	/*'termwinscroll'*
 'termwinsize'	options.txt	/*'termwinsize'*
+'termwintype'	options.txt	/*'termwintype'*
 'terse'	options.txt	/*'terse'*
 'textauto'	options.txt	/*'textauto'*
 'textmode'	options.txt	/*'textmode'*
@@ -1135,6 +1136,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'twk'	options.txt	/*'twk'*
 'tws'	options.txt	/*'tws'*
 'twsl'	options.txt	/*'twsl'*
+'twt'	options.txt	/*'twt'*
 'tx'	options.txt	/*'tx'*
 'uc'	options.txt	/*'uc'*
 'udf'	options.txt	/*'udf'*
@@ -1356,6 +1358,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 +terminfo	various.txt	/*+terminfo*
 +termresponse	various.txt	/*+termresponse*
 +textobjects	various.txt	/*+textobjects*
++textprop	various.txt	/*+textprop*
 +tgetent	various.txt	/*+tgetent*
 +timers	various.txt	/*+timers*
 +title	various.txt	/*+title*
@@ -1716,6 +1719,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 05.6	usr_05.txt	/*05.6*
 05.7	usr_05.txt	/*05.7*
 05.8	usr_05.txt	/*05.8*
+05.9	usr_05.txt	/*05.9*
 06.1	usr_06.txt	/*06.1*
 06.2	usr_06.txt	/*06.2*
 06.3	usr_06.txt	/*06.3*
@@ -1932,6 +1936,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :<cfile>	cmdline.txt	/*:<cfile>*
 :<cword>	cmdline.txt	/*:<cword>*
 :<sfile>	cmdline.txt	/*:<sfile>*
+:<sflnum>	cmdline.txt	/*:<sflnum>*
+:<slnum>	cmdline.txt	/*:<slnum>*
 :=	various.txt	/*:=*
 :>	change.txt	/*:>*
 :?	cmdline.txt	/*:?*
@@ -1946,6 +1952,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :AdaTypes	ft_ada.txt	/*:AdaTypes*
 :Arguments	terminal.txt	/*:Arguments*
 :Break	terminal.txt	/*:Break*
+:Cfilter	quickfix.txt	/*:Cfilter*
 :Clear	terminal.txt	/*:Clear*
 :CompilerSet	usr_41.txt	/*:CompilerSet*
 :Continue	terminal.txt	/*:Continue*
@@ -1965,6 +1972,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :LPE	pi_logipat.txt	/*:LPE*
 :LPF	pi_logipat.txt	/*:LPF*
 :Lexplore	pi_netrw.txt	/*:Lexplore*
+:Lfilter	quickfix.txt	/*:Lfilter*
 :LogiPat	pi_logipat.txt	/*:LogiPat*
 :Man	filetype.txt	/*:Man*
 :MkVimball	pi_vimball.txt	/*:MkVimball*
@@ -2233,6 +2241,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :cp	quickfix.txt	/*:cp*
 :cpf	quickfix.txt	/*:cpf*
 :cpfile	quickfix.txt	/*:cpfile*
+:cprev	quickfix.txt	/*:cprev*
 :cprevious	quickfix.txt	/*:cprevious*
 :cq	quickfix.txt	/*:cq*
 :cquit	quickfix.txt	/*:cquit*
@@ -2512,6 +2521,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :lefta	windows.txt	/*:lefta*
 :leftabove	windows.txt	/*:leftabove*
 :let	eval.txt	/*:let*
+:let%=	eval.txt	/*:let%=*
 :let+=	eval.txt	/*:let+=*
 :let-$	eval.txt	/*:let-$*
 :let-&	eval.txt	/*:let-&*
@@ -2522,6 +2532,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :let-register	eval.txt	/*:let-register*
 :let-unpack	eval.txt	/*:let-unpack*
 :let.=	eval.txt	/*:let.=*
+:let/=	eval.txt	/*:let\/=*
+:letstar=	eval.txt	/*:letstar=*
 :lex	quickfix.txt	/*:lex*
 :lexpr	quickfix.txt	/*:lexpr*
 :lf	quickfix.txt	/*:lf*
@@ -2579,6 +2591,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :lp	quickfix.txt	/*:lp*
 :lpf	quickfix.txt	/*:lpf*
 :lpfile	quickfix.txt	/*:lpfile*
+:lprev	quickfix.txt	/*:lprev*
 :lprevious	quickfix.txt	/*:lprevious*
 :lr	quickfix.txt	/*:lr*
 :lrewind	quickfix.txt	/*:lrewind*
@@ -2833,6 +2846,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :redraw	various.txt	/*:redraw*
 :redraws	various.txt	/*:redraws*
 :redrawstatus	various.txt	/*:redrawstatus*
+:redrawt	various.txt	/*:redrawt*
+:redrawtabline	various.txt	/*:redrawtabline*
 :reg	change.txt	/*:reg*
 :registers	change.txt	/*:registers*
 :res	windows.txt	/*:res*
@@ -2872,8 +2887,17 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :sN	windows.txt	/*:sN*
 :sNext	windows.txt	/*:sNext*
 :s\=	change.txt	/*:s\\=*
+:s_#	change.txt	/*:s_#*
+:s_I	change.txt	/*:s_I*
 :s_c	change.txt	/*:s_c*
+:s_e	change.txt	/*:s_e*
 :s_flags	change.txt	/*:s_flags*
+:s_g	change.txt	/*:s_g*
+:s_i	change.txt	/*:s_i*
+:s_l	change.txt	/*:s_l*
+:s_n	change.txt	/*:s_n*
+:s_p	change.txt	/*:s_p*
+:s_r	change.txt	/*:s_r*
 :sa	windows.txt	/*:sa*
 :sal	windows.txt	/*:sal*
 :sall	windows.txt	/*:sall*
@@ -2908,6 +2932,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :scl	change.txt	/*:scl*
 :scp	change.txt	/*:scp*
 :scr	repeat.txt	/*:scr*
+:script	repeat.txt	/*:script*
 :scripte	repeat.txt	/*:scripte*
 :scriptencoding	repeat.txt	/*:scriptencoding*
 :scriptnames	repeat.txt	/*:scriptnames*
@@ -3174,6 +3199,12 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :tjump	tagsrch.txt	/*:tjump*
 :tl	tagsrch.txt	/*:tl*
 :tlast	tagsrch.txt	/*:tlast*
+:tlm	gui.txt	/*:tlm*
+:tlmenu	gui.txt	/*:tlmenu*
+:tln	gui.txt	/*:tln*
+:tlnoremenu	gui.txt	/*:tlnoremenu*
+:tlu	gui.txt	/*:tlu*
+:tlunmenu	gui.txt	/*:tlunmenu*
 :tm	gui.txt	/*:tm*
 :tma	map.txt	/*:tma*
 :tmap	map.txt	/*:tmap*
@@ -3294,8 +3325,6 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :write_a	editing.txt	/*:write_a*
 :write_c	editing.txt	/*:write_c*
 :write_f	editing.txt	/*:write_f*
-:ws	workshop.txt	/*:ws*
-:wsverb	workshop.txt	/*:wsverb*
 :wundo	undo.txt	/*:wundo*
 :wv	starting.txt	/*:wv*
 :wviminfo	starting.txt	/*:wviminfo*
@@ -3462,10 +3491,12 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 <bang>	map.txt	/*<bang>*
 <buffer=N>	autocmd.txt	/*<buffer=N>*
 <buffer=abuf>	autocmd.txt	/*<buffer=abuf>*
+<cWORD>	cmdline.txt	/*<cWORD>*
 <cexpr>	cmdline.txt	/*<cexpr>*
 <cfile>	cmdline.txt	/*<cfile>*
 <character>	intro.txt	/*<character>*
 <count>	map.txt	/*<count>*
+<cword>	cmdline.txt	/*<cword>*
 <f-args>	map.txt	/*<f-args>*
 <k0>	term.txt	/*<k0>*
 <k1>	term.txt	/*<k1>*
@@ -3497,6 +3528,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 <reg>	map.txt	/*<reg>*
 <register>	map.txt	/*<register>*
 <sfile>	cmdline.txt	/*<sfile>*
+<sflnum>	cmdline.txt	/*<sflnum>*
 <slnum>	cmdline.txt	/*<slnum>*
 <xCSI>	intro.txt	/*<xCSI>*
 <xDown>	term.txt	/*<xDown>*
@@ -3552,6 +3584,9 @@ Athena	gui_x11.txt	/*Athena*
 B	motion.txt	/*B*
 BeBox	os_beos.txt	/*BeBox*
 BeOS	os_beos.txt	/*BeOS*
+Blob	eval.txt	/*Blob*
+Blobs	eval.txt	/*Blobs*
+Boolean	eval.txt	/*Boolean*
 Bram	intro.txt	/*Bram*
 BufAdd	autocmd.txt	/*BufAdd*
 BufCreate	autocmd.txt	/*BufCreate*
@@ -3610,7 +3645,6 @@ CTRL-V-alternative	gui_w32.txt	/*CTRL-V-alternative*
 CTRL-W	index.txt	/*CTRL-W*
 CTRL-W_+	windows.txt	/*CTRL-W_+*
 CTRL-W_-	windows.txt	/*CTRL-W_-*
-CTRL-W_.	terminal.txt	/*CTRL-W_.*
 CTRL-W_:	windows.txt	/*CTRL-W_:*
 CTRL-W_<	windows.txt	/*CTRL-W_<*
 CTRL-W_<BS>	windows.txt	/*CTRL-W_<BS>*
@@ -3650,7 +3684,6 @@ CTRL-W_H	windows.txt	/*CTRL-W_H*
 CTRL-W_J	windows.txt	/*CTRL-W_J*
 CTRL-W_K	windows.txt	/*CTRL-W_K*
 CTRL-W_L	windows.txt	/*CTRL-W_L*
-CTRL-W_N	terminal.txt	/*CTRL-W_N*
 CTRL-W_P	windows.txt	/*CTRL-W_P*
 CTRL-W_R	windows.txt	/*CTRL-W_R*
 CTRL-W_S	windows.txt	/*CTRL-W_S*
@@ -3665,9 +3698,11 @@ CTRL-W_c	windows.txt	/*CTRL-W_c*
 CTRL-W_d	tagsrch.txt	/*CTRL-W_d*
 CTRL-W_f	windows.txt	/*CTRL-W_f*
 CTRL-W_gF	windows.txt	/*CTRL-W_gF*
+CTRL-W_gT	windows.txt	/*CTRL-W_gT*
 CTRL-W_g]	windows.txt	/*CTRL-W_g]*
 CTRL-W_g_CTRL-]	windows.txt	/*CTRL-W_g_CTRL-]*
 CTRL-W_gf	windows.txt	/*CTRL-W_gf*
+CTRL-W_gt	windows.txt	/*CTRL-W_gt*
 CTRL-W_g}	windows.txt	/*CTRL-W_g}*
 CTRL-W_h	windows.txt	/*CTRL-W_h*
 CTRL-W_i	tagsrch.txt	/*CTRL-W_i*
@@ -3678,7 +3713,6 @@ CTRL-W_n	windows.txt	/*CTRL-W_n*
 CTRL-W_o	windows.txt	/*CTRL-W_o*
 CTRL-W_p	windows.txt	/*CTRL-W_p*
 CTRL-W_q	windows.txt	/*CTRL-W_q*
-CTRL-W_quote	terminal.txt	/*CTRL-W_quote*
 CTRL-W_r	windows.txt	/*CTRL-W_r*
 CTRL-W_s	windows.txt	/*CTRL-W_s*
 CTRL-W_t	windows.txt	/*CTRL-W_t*
@@ -3712,6 +3746,7 @@ ColorSchemePre	autocmd.txt	/*ColorSchemePre*
 Command-line	cmdline.txt	/*Command-line*
 Command-line-mode	cmdline.txt	/*Command-line-mode*
 CompleteDone	autocmd.txt	/*CompleteDone*
+ConPTY	terminal.txt	/*ConPTY*
 Contents	quickref.txt	/*Contents*
 Cscope	if_cscop.txt	/*Cscope*
 CursorHold	autocmd.txt	/*CursorHold*
@@ -3724,9 +3759,11 @@ D	change.txt	/*D*
 DOS	os_dos.txt	/*DOS*
 DOS-format	editing.txt	/*DOS-format*
 DOS-format-write	editing.txt	/*DOS-format-write*
+Dict	eval.txt	/*Dict*
 Dictionaries	eval.txt	/*Dictionaries*
 Dictionary	eval.txt	/*Dictionary*
 Dictionary-function	eval.txt	/*Dictionary-function*
+DiffUpdated	autocmd.txt	/*DiffUpdated*
 Digraphs	digraph.txt	/*Digraphs*
 DirChanged	autocmd.txt	/*DirChanged*
 E	motion.txt	/*E*
@@ -4103,7 +4140,6 @@ E457	print.txt	/*E457*
 E458	message.txt	/*E458*
 E459	message.txt	/*E459*
 E46	message.txt	/*E46*
-E460	message.txt	/*E460*
 E461	eval.txt	/*E461*
 E462	editing.txt	/*E462*
 E463	netbeans.txt	/*E463*
@@ -4562,7 +4598,10 @@ E892	eval.txt	/*E892*
 E893	eval.txt	/*E893*
 E894	eval.txt	/*E894*
 E895	if_mzsch.txt	/*E895*
+E896	eval.txt	/*E896*
+E897	eval.txt	/*E897*
 E898	channel.txt	/*E898*
+E899	eval.txt	/*E899*
 E90	message.txt	/*E90*
 E901	channel.txt	/*E901*
 E902	channel.txt	/*E902*
@@ -4626,9 +4665,33 @@ E954	options.txt	/*E954*
 E955	eval.txt	/*E955*
 E956	pattern.txt	/*E956*
 E957	eval.txt	/*E957*
+E958	eval.txt	/*E958*
 E96	diff.txt	/*E96*
+E960	options.txt	/*E960*
+E961	cmdline.txt	/*E961*
+E962	eval.txt	/*E962*
+E963	eval.txt	/*E963*
+E964	eval.txt	/*E964*
+E965	eval.txt	/*E965*
+E966	eval.txt	/*E966*
+E967	textprop.txt	/*E967*
+E968	eval.txt	/*E968*
+E969	eval.txt	/*E969*
 E97	diff.txt	/*E97*
+E970	eval.txt	/*E970*
+E971	textprop.txt	/*E971*
+E972	eval.txt	/*E972*
+E973	eval.txt	/*E973*
+E974	eval.txt	/*E974*
+E975	eval.txt	/*E975*
+E976	eval.txt	/*E976*
+E977	eval.txt	/*E977*
+E978	eval.txt	/*E978*
+E979	eval.txt	/*E979*
 E98	diff.txt	/*E98*
+E980	eval.txt	/*E980*
+E981	starting.txt	/*E981*
+E982	terminal.txt	/*E982*
 E99	diff.txt	/*E99*
 EX	intro.txt	/*EX*
 EXINIT	starting.txt	/*EXINIT*
@@ -4732,8 +4795,11 @@ N:	cmdline.txt	/*N:*
 N<Del>	various.txt	/*N<Del>*
 NFA	pattern.txt	/*NFA*
 NL-used-for-Nul	pattern.txt	/*NL-used-for-Nul*
+Neovim	intro.txt	/*Neovim*
 NetBSD-backspace	options.txt	/*NetBSD-backspace*
+NetBeans	netbeans.txt	/*NetBeans*
 NetUserPass()	pi_netrw.txt	/*NetUserPass()*
+None	eval.txt	/*None*
 Normal	intro.txt	/*Normal*
 Normal-mode	intro.txt	/*Normal-mode*
 Number	eval.txt	/*Number*
@@ -4841,6 +4907,7 @@ SessionLoadPost	autocmd.txt	/*SessionLoadPost*
 ShellCmdPost	autocmd.txt	/*ShellCmdPost*
 ShellFilterPost	autocmd.txt	/*ShellFilterPost*
 SourceCmd	autocmd.txt	/*SourceCmd*
+SourcePost	autocmd.txt	/*SourcePost*
 SourcePre	autocmd.txt	/*SourcePre*
 Special	eval.txt	/*Special*
 SpellFileMissing	autocmd.txt	/*SpellFileMissing*
@@ -4953,7 +5020,10 @@ ZZ	editing.txt	/*ZZ*
 [:cntrl:]	pattern.txt	/*[:cntrl:]*
 [:digit:]	pattern.txt	/*[:digit:]*
 [:escape:]	pattern.txt	/*[:escape:]*
+[:fname:]	pattern.txt	/*[:fname:]*
 [:graph:]	pattern.txt	/*[:graph:]*
+[:ident:]	pattern.txt	/*[:ident:]*
+[:keyword:]	pattern.txt	/*[:keyword:]*
 [:lower:]	pattern.txt	/*[:lower:]*
 [:print:]	pattern.txt	/*[:print:]*
 [:punct:]	pattern.txt	/*[:punct:]*
@@ -5243,6 +5313,11 @@ beval_winid-variable	eval.txt	/*beval_winid-variable*
 beval_winnr-variable	eval.txt	/*beval_winnr-variable*
 binary-number	eval.txt	/*binary-number*
 bitwise-function	usr_41.txt	/*bitwise-function*
+blob	eval.txt	/*blob*
+blob-identity	eval.txt	/*blob-identity*
+blob-index	eval.txt	/*blob-index*
+blob-literal	eval.txt	/*blob-literal*
+blob-modification	eval.txt	/*blob-modification*
 blockwise-examples	visual.txt	/*blockwise-examples*
 blockwise-operators	visual.txt	/*blockwise-operators*
 blockwise-register	change.txt	/*blockwise-register*
@@ -5253,6 +5328,7 @@ bold	syntax.txt	/*bold*
 bom-bytes	mbyte.txt	/*bom-bytes*
 book	intro.txt	/*book*
 bookmark	usr_03.txt	/*bookmark*
+books	intro.txt	/*books*
 boolean	options.txt	/*boolean*
 break-finally	eval.txt	/*break-finally*
 browse()	eval.txt	/*browse()*
@@ -5408,6 +5484,7 @@ catch-order	eval.txt	/*catch-order*
 catch-text	eval.txt	/*catch-text*
 cc	change.txt	/*cc*
 ceil()	eval.txt	/*ceil()*
+cfilter-plugin	quickfix.txt	/*cfilter-plugin*
 ch.vim	syntax.txt	/*ch.vim*
 ch_canread()	eval.txt	/*ch_canread()*
 ch_close()	eval.txt	/*ch_close()*
@@ -5421,6 +5498,7 @@ ch_log()	eval.txt	/*ch_log()*
 ch_logfile()	eval.txt	/*ch_logfile()*
 ch_open()	eval.txt	/*ch_open()*
 ch_read()	eval.txt	/*ch_read()*
+ch_readblob()	eval.txt	/*ch_readblob()*
 ch_readraw()	eval.txt	/*ch_readraw()*
 ch_sendexpr()	eval.txt	/*ch_sendexpr()*
 ch_sendraw()	eval.txt	/*ch_sendraw()*
@@ -5462,6 +5540,7 @@ channel-drop	channel.txt	/*channel-drop*
 channel-functions	usr_41.txt	/*channel-functions*
 channel-mode	channel.txt	/*channel-mode*
 channel-more	channel.txt	/*channel-more*
+channel-noblock	channel.txt	/*channel-noblock*
 channel-open	channel.txt	/*channel-open*
 channel-open-options	channel.txt	/*channel-open-options*
 channel-raw	channel.txt	/*channel-raw*
@@ -5779,6 +5858,7 @@ dec-mouse	options.txt	/*dec-mouse*
 decada_members	ft_ada.txt	/*decada_members*
 deepcopy()	eval.txt	/*deepcopy()*
 defaults.vim	starting.txt	/*defaults.vim*
+defaults.vim-explained	usr_05.txt	/*defaults.vim-explained*
 definition-search	tagsrch.txt	/*definition-search*
 definitions	intro.txt	/*definitions*
 delete()	eval.txt	/*delete()*
@@ -6052,7 +6132,6 @@ f	motion.txt	/*f*
 false-variable	eval.txt	/*false-variable*
 faq	intro.txt	/*faq*
 farsi	farsi.txt	/*farsi*
-farsi-fonts	farsi.txt	/*farsi-fonts*
 farsi.txt	farsi.txt	/*farsi.txt*
 fasm.vim	syntax.txt	/*fasm.vim*
 fcs_choice-variable	eval.txt	/*fcs_choice-variable*
@@ -6152,6 +6231,7 @@ foldtext()	eval.txt	/*foldtext()*
 foldtextresult()	eval.txt	/*foldtextresult()*
 font-sizes	gui_x11.txt	/*font-sizes*
 fontset	mbyte.txt	/*fontset*
+forced-motion	motion.txt	/*forced-motion*
 foreground()	eval.txt	/*foreground()*
 fork	os_unix.txt	/*fork*
 form.vim	syntax.txt	/*form.vim*
@@ -6270,8 +6350,14 @@ ft-python-plugin	filetype.txt	/*ft-python-plugin*
 ft-python-syntax	syntax.txt	/*ft-python-syntax*
 ft-quake-syntax	syntax.txt	/*ft-quake-syntax*
 ft-r-indent	indent.txt	/*ft-r-indent*
+ft-r-syntax	syntax.txt	/*ft-r-syntax*
 ft-readline-syntax	syntax.txt	/*ft-readline-syntax*
 ft-rexx-syntax	syntax.txt	/*ft-rexx-syntax*
+ft-rmd-plugin	filetype.txt	/*ft-rmd-plugin*
+ft-rmd-syntax	syntax.txt	/*ft-rmd-syntax*
+ft-rrst-plugin	filetype.txt	/*ft-rrst-plugin*
+ft-rrst-syntax	syntax.txt	/*ft-rrst-syntax*
+ft-rst-plugin	filetype.txt	/*ft-rst-plugin*
 ft-rst-syntax	syntax.txt	/*ft-rst-syntax*
 ft-ruby-omni	insert.txt	/*ft-ruby-omni*
 ft-ruby-syntax	syntax.txt	/*ft-ruby-syntax*
@@ -6659,6 +6745,7 @@ getscript-start	pi_getscript.txt	/*getscript-start*
 gettabinfo()	eval.txt	/*gettabinfo()*
 gettabvar()	eval.txt	/*gettabvar()*
 gettabwinvar()	eval.txt	/*gettabwinvar()*
+gettagstack()	eval.txt	/*gettagstack()*
 getwininfo()	eval.txt	/*getwininfo()*
 getwinpos()	eval.txt	/*getwinpos()*
 getwinposx()	eval.txt	/*getwinposx()*
@@ -6778,7 +6865,6 @@ gui_w32.txt	gui_w32.txt	/*gui_w32.txt*
 gui_x11.txt	gui_x11.txt	/*gui_x11.txt*
 guifontwide_gtk	options.txt	/*guifontwide_gtk*
 guifontwide_win_mbyte	options.txt	/*guifontwide_win_mbyte*
-guioptions_a	options.txt	/*guioptions_a*
 guu	change.txt	/*guu*
 gv	visual.txt	/*gv*
 gview	starting.txt	/*gview*
@@ -7177,6 +7263,7 @@ job-err_io	channel.txt	/*job-err_io*
 job-exit_cb	channel.txt	/*job-exit_cb*
 job-functions	usr_41.txt	/*job-functions*
 job-in_io	channel.txt	/*job-in_io*
+job-noblock	channel.txt	/*job-noblock*
 job-options	channel.txt	/*job-options*
 job-out_cb	channel.txt	/*job-out_cb*
 job-out_io	channel.txt	/*job-out_io*
@@ -7238,7 +7325,7 @@ lambda	eval.txt	/*lambda*
 lang-variable	eval.txt	/*lang-variable*
 language-mapping	map.txt	/*language-mapping*
 last-pattern	pattern.txt	/*last-pattern*
-last-position-jump	eval.txt	/*last-position-jump*
+last-position-jump	usr_05.txt	/*last-position-jump*
 last_buffer_nr()	eval.txt	/*last_buffer_nr()*
 latex-syntax	syntax.txt	/*latex-syntax*
 lc_time-variable	eval.txt	/*lc_time-variable*
@@ -7264,6 +7351,7 @@ lifelines.vim	syntax.txt	/*lifelines.vim*
 limits	vi_diff.txt	/*limits*
 line()	eval.txt	/*line()*
 line-continuation	repeat.txt	/*line-continuation*
+line-continuation-comment	repeat.txt	/*line-continuation-comment*
 line2byte()	eval.txt	/*line2byte()*
 linefeed	intro.txt	/*linefeed*
 linewise	motion.txt	/*linewise*
@@ -7292,6 +7380,7 @@ locale	mbyte.txt	/*locale*
 locale-name	mbyte.txt	/*locale-name*
 localtime()	eval.txt	/*localtime()*
 location-list	quickfix.txt	/*location-list*
+location-list-file-window	quickfix.txt	/*location-list-file-window*
 location-list-window	quickfix.txt	/*location-list-window*
 log()	eval.txt	/*log()*
 log10()	eval.txt	/*log10()*
@@ -7537,6 +7626,7 @@ netbeans-protocol	netbeans.txt	/*netbeans-protocol*
 netbeans-run	netbeans.txt	/*netbeans-run*
 netbeans-setup	netbeans.txt	/*netbeans-setup*
 netbeans-support	netbeans.txt	/*netbeans-support*
+netbeans-xpm	netbeans.txt	/*netbeans-xpm*
 netbeans.txt	netbeans.txt	/*netbeans.txt*
 netreadfixup	pi_netrw.txt	/*netreadfixup*
 netrw	pi_netrw.txt	/*netrw*
@@ -7903,6 +7993,7 @@ omni-sql-completion	ft_sql.txt	/*omni-sql-completion*
 online-help	helphelp.txt	/*online-help*
 opening-window	windows.txt	/*opening-window*
 operator	motion.txt	/*operator*
+operator-pending-index	index.txt	/*operator-pending-index*
 operator-variable	eval.txt	/*operator-variable*
 option-backslash	options.txt	/*option-backslash*
 option-list	quickref.txt	/*option-list*
@@ -7970,6 +8061,7 @@ peace	intro.txt	/*peace*
 penc-option	print.txt	/*penc-option*
 perl	if_perl.txt	/*perl*
 perl-Append	if_perl.txt	/*perl-Append*
+perl-Blob	if_perl.txt	/*perl-Blob*
 perl-Buffer	if_perl.txt	/*perl-Buffer*
 perl-Buffers	if_perl.txt	/*perl-Buffers*
 perl-Count	if_perl.txt	/*perl-Count*
@@ -8078,7 +8170,18 @@ prompt-buffer	channel.txt	/*prompt-buffer*
 prompt_setcallback()	eval.txt	/*prompt_setcallback()*
 prompt_setinterrupt()	eval.txt	/*prompt_setinterrupt()*
 prompt_setprompt()	eval.txt	/*prompt_setprompt()*
+promptbuffer-functions	usr_41.txt	/*promptbuffer-functions*
 pronounce	intro.txt	/*pronounce*
+prop_add()	eval.txt	/*prop_add()*
+prop_clear()	eval.txt	/*prop_clear()*
+prop_find()	eval.txt	/*prop_find()*
+prop_list()	eval.txt	/*prop_list()*
+prop_remove()	eval.txt	/*prop_remove()*
+prop_type_add()	eval.txt	/*prop_type_add()*
+prop_type_change()	eval.txt	/*prop_type_change()*
+prop_type_delete()	eval.txt	/*prop_type_delete()*
+prop_type_get()	eval.txt	/*prop_type_get()*
+prop_type_list()	eval.txt	/*prop_type_list()*
 psql	ft_sql.txt	/*psql*
 ptcap.vim	syntax.txt	/*ptcap.vim*
 pterm-mouse	options.txt	/*pterm-mouse*
@@ -8147,12 +8250,14 @@ quake.vim	syntax.txt	/*quake.vim*
 quickfix	quickfix.txt	/*quickfix*
 quickfix-6	version6.txt	/*quickfix-6*
 quickfix-ID	quickfix.txt	/*quickfix-ID*
+quickfix-buffer	quickfix.txt	/*quickfix-buffer*
 quickfix-changedtick	quickfix.txt	/*quickfix-changedtick*
 quickfix-context	quickfix.txt	/*quickfix-context*
 quickfix-directory-stack	quickfix.txt	/*quickfix-directory-stack*
 quickfix-error-lists	quickfix.txt	/*quickfix-error-lists*
 quickfix-functions	usr_41.txt	/*quickfix-functions*
 quickfix-gcc	quickfix.txt	/*quickfix-gcc*
+quickfix-index	quickfix.txt	/*quickfix-index*
 quickfix-manx	quickfix.txt	/*quickfix-manx*
 quickfix-parse	quickfix.txt	/*quickfix-parse*
 quickfix-perl	quickfix.txt	/*quickfix-perl*
@@ -8200,6 +8305,7 @@ quotes.txt	quotes.txt	/*quotes.txt*
 quotestar	gui.txt	/*quotestar*
 quote~	change.txt	/*quote~*
 r	change.txt	/*r*
+r.vim	syntax.txt	/*r.vim*
 range()	eval.txt	/*range()*
 raw-terminal-mode	term.txt	/*raw-terminal-mode*
 rcp	pi_netrw.txt	/*rcp*
@@ -8264,11 +8370,14 @@ right-justify	change.txt	/*right-justify*
 rileft	rileft.txt	/*rileft*
 rileft.txt	rileft.txt	/*rileft.txt*
 riscos	os_risc.txt	/*riscos*
+rmd.vim	syntax.txt	/*rmd.vim*
 rot13	change.txt	/*rot13*
 round()	eval.txt	/*round()*
+rrst.vim	syntax.txt	/*rrst.vim*
 rst.vim	syntax.txt	/*rst.vim*
 rsync	pi_netrw.txt	/*rsync*
 ruby	if_ruby.txt	/*ruby*
+ruby-blob	if_ruby.txt	/*ruby-blob*
 ruby-buffer	if_ruby.txt	/*ruby-buffer*
 ruby-command	if_ruby.txt	/*ruby-command*
 ruby-commands	if_ruby.txt	/*ruby-commands*
@@ -8398,6 +8507,7 @@ setqflist-examples	quickfix.txt	/*setqflist-examples*
 setreg()	eval.txt	/*setreg()*
 settabvar()	eval.txt	/*settabvar()*
 settabwinvar()	eval.txt	/*settabwinvar()*
+settagstack()	eval.txt	/*settagstack()*
 setting-guifont	gui.txt	/*setting-guifont*
 setting-guitablabel	tabpage.txt	/*setting-guitablabel*
 setting-tabline	tabpage.txt	/*setting-tabline*
@@ -8418,10 +8528,22 @@ shift-left-right	change.txt	/*shift-left-right*
 shiftwidth()	eval.txt	/*shiftwidth()*
 short-name-changed	version4.txt	/*short-name-changed*
 showing-menus	gui.txt	/*showing-menus*
+sign-column	sign.txt	/*sign-column*
 sign-commands	sign.txt	/*sign-commands*
+sign-functions	usr_41.txt	/*sign-functions*
+sign-group	sign.txt	/*sign-group*
+sign-identifier	sign.txt	/*sign-identifier*
 sign-intro	sign.txt	/*sign-intro*
+sign-priority	sign.txt	/*sign-priority*
 sign-support	sign.txt	/*sign-support*
 sign.txt	sign.txt	/*sign.txt*
+sign_define()	eval.txt	/*sign_define()*
+sign_getdefined()	eval.txt	/*sign_getdefined()*
+sign_getplaced()	eval.txt	/*sign_getplaced()*
+sign_jump()	eval.txt	/*sign_jump()*
+sign_place()	eval.txt	/*sign_place()*
+sign_undefine()	eval.txt	/*sign_undefine()*
+sign_unplace()	eval.txt	/*sign_unplace()*
 signs	sign.txt	/*signs*
 simple-change	change.txt	/*simple-change*
 simplify()	eval.txt	/*simplify()*
@@ -8458,6 +8580,7 @@ spell-CHECKCOMPOUNDDUP	spell.txt	/*spell-CHECKCOMPOUNDDUP*
 spell-CHECKCOMPOUNDPATTERN	spell.txt	/*spell-CHECKCOMPOUNDPATTERN*
 spell-CHECKCOMPOUNDREP	spell.txt	/*spell-CHECKCOMPOUNDREP*
 spell-CHECKCOMPOUNDTRIPLE	spell.txt	/*spell-CHECKCOMPOUNDTRIPLE*
+spell-CHECKSHARPS	spell.txt	/*spell-CHECKSHARPS*
 spell-CIRCUMFIX	spell.txt	/*spell-CIRCUMFIX*
 spell-COMMON	spell.txt	/*spell-COMMON*
 spell-COMPLEXPREFIXES	spell.txt	/*spell-COMPLEXPREFIXES*
@@ -8467,6 +8590,7 @@ spell-COMPOUNDEND	spell.txt	/*spell-COMPOUNDEND*
 spell-COMPOUNDFIRST	spell.txt	/*spell-COMPOUNDFIRST*
 spell-COMPOUNDFLAG	spell.txt	/*spell-COMPOUNDFLAG*
 spell-COMPOUNDFORBIDFLAG	spell.txt	/*spell-COMPOUNDFORBIDFLAG*
+spell-COMPOUNDLAST	spell.txt	/*spell-COMPOUNDLAST*
 spell-COMPOUNDMIDDLE	spell.txt	/*spell-COMPOUNDMIDDLE*
 spell-COMPOUNDMIN	spell.txt	/*spell-COMPOUNDMIN*
 spell-COMPOUNDPERMITFLAG	spell.txt	/*spell-COMPOUNDPERMITFLAG*
@@ -8651,6 +8775,8 @@ swap-file	recover.txt	/*swap-file*
 swapchoice-variable	eval.txt	/*swapchoice-variable*
 swapcommand-variable	eval.txt	/*swapcommand-variable*
 swapfile-changed	version4.txt	/*swapfile-changed*
+swapinfo()	eval.txt	/*swapinfo()*
+swapname()	eval.txt	/*swapname()*
 swapname-variable	eval.txt	/*swapname-variable*
 sybase	ft_sql.txt	/*sybase*
 syn-sync-grouphere	syntax.txt	/*syn-sync-grouphere*
@@ -8700,7 +8826,14 @@ t_AL	term.txt	/*t_AL*
 t_BD	term.txt	/*t_BD*
 t_BE	term.txt	/*t_BE*
 t_CS	term.txt	/*t_CS*
+t_CTRL-W_.	terminal.txt	/*t_CTRL-W_.*
+t_CTRL-W_:	terminal.txt	/*t_CTRL-W_:*
 t_CTRL-W_CTRL-C	terminal.txt	/*t_CTRL-W_CTRL-C*
+t_CTRL-W_CTRL-W	terminal.txt	/*t_CTRL-W_CTRL-W*
+t_CTRL-W_N	terminal.txt	/*t_CTRL-W_N*
+t_CTRL-W_gT	terminal.txt	/*t_CTRL-W_gT*
+t_CTRL-W_gt	terminal.txt	/*t_CTRL-W_gt*
+t_CTRL-W_quote	terminal.txt	/*t_CTRL-W_quote*
 t_CTRL-\_CTRL-N	terminal.txt	/*t_CTRL-\\_CTRL-N*
 t_CV	term.txt	/*t_CV*
 t_Ce	term.txt	/*t_Ce*
@@ -8768,6 +8901,7 @@ t_ZH	term.txt	/*t_ZH*
 t_ZR	term.txt	/*t_ZR*
 t_al	term.txt	/*t_al*
 t_bc	term.txt	/*t_bc*
+t_blob-variable	eval.txt	/*t_blob-variable*
 t_bool-variable	eval.txt	/*t_bool-variable*
 t_cd	term.txt	/*t_cd*
 t_cdl	version4.txt	/*t_cdl*
@@ -8894,6 +9028,7 @@ tag-binary-search	tagsrch.txt	/*tag-binary-search*
 tag-blocks	motion.txt	/*tag-blocks*
 tag-commands	tagsrch.txt	/*tag-commands*
 tag-details	tagsrch.txt	/*tag-details*
+tag-functions	usr_41.txt	/*tag-functions*
 tag-highlight	syntax.txt	/*tag-highlight*
 tag-matchlist	tagsrch.txt	/*tag-matchlist*
 tag-old-static	tagsrch.txt	/*tag-old-static*
@@ -9034,6 +9169,7 @@ terminal-diffscreendump	terminal.txt	/*terminal-diffscreendump*
 terminal-dumptest	terminal.txt	/*terminal-dumptest*
 terminal-functions	usr_41.txt	/*terminal-functions*
 terminal-info	term.txt	/*terminal-info*
+terminal-job-index	index.txt	/*terminal-job-index*
 terminal-key-codes	term.txt	/*terminal-key-codes*
 terminal-ms-windows	terminal.txt	/*terminal-ms-windows*
 terminal-options	term.txt	/*terminal-options*
@@ -9058,13 +9194,16 @@ test_autochdir()	eval.txt	/*test_autochdir()*
 test_feedinput()	eval.txt	/*test_feedinput()*
 test_garbagecollect_now()	eval.txt	/*test_garbagecollect_now()*
 test_ignore_error()	eval.txt	/*test_ignore_error()*
+test_null_blob()	eval.txt	/*test_null_blob()*
 test_null_channel()	eval.txt	/*test_null_channel()*
 test_null_dict()	eval.txt	/*test_null_dict()*
 test_null_job()	eval.txt	/*test_null_job()*
 test_null_list()	eval.txt	/*test_null_list()*
 test_null_partial()	eval.txt	/*test_null_partial()*
 test_null_string()	eval.txt	/*test_null_string()*
+test_option_not_set()	eval.txt	/*test_option_not_set()*
 test_override()	eval.txt	/*test_override()*
+test_scrollbar()	eval.txt	/*test_scrollbar()*
 test_settime()	eval.txt	/*test_settime()*
 testing	eval.txt	/*testing*
 testing-variable	eval.txt	/*testing-variable*
@@ -9088,7 +9227,12 @@ tex.vim	syntax.txt	/*tex.vim*
 text-functions	usr_41.txt	/*text-functions*
 text-objects	motion.txt	/*text-objects*
 text-objects-changed	version5.txt	/*text-objects-changed*
+text-prop-changes	textprop.txt	/*text-prop-changes*
+text-prop-functions	textprop.txt	/*text-prop-functions*
+text-prop-intro	textprop.txt	/*text-prop-intro*
+text-properties	textprop.txt	/*text-properties*
 textlock	eval.txt	/*textlock*
+textprop.txt	textprop.txt	/*textprop.txt*
 tf.vim	syntax.txt	/*tf.vim*
 this_session-variable	eval.txt	/*this_session-variable*
 throw-catch	eval.txt	/*throw-catch*
@@ -9274,6 +9418,7 @@ v:swapchoice	eval.txt	/*v:swapchoice*
 v:swapcommand	eval.txt	/*v:swapcommand*
 v:swapname	eval.txt	/*v:swapname*
 v:t_TYPE	eval.txt	/*v:t_TYPE*
+v:t_blob	eval.txt	/*v:t_blob*
 v:t_bool	eval.txt	/*v:t_bool*
 v:t_channel	eval.txt	/*v:t_channel*
 v:t_dict	eval.txt	/*v:t_dict*
@@ -9631,6 +9776,7 @@ windows98	os_win32.txt	/*windows98*
 windowsme	os_win32.txt	/*windowsme*
 winheight()	eval.txt	/*winheight()*
 winid	windows.txt	/*winid*
+winlayout()	eval.txt	/*winlayout()*
 winline()	eval.txt	/*winline()*
 winnr()	eval.txt	/*winnr()*
 winrestcmd()	eval.txt	/*winrestcmd()*
@@ -9643,12 +9789,7 @@ word-motions	motion.txt	/*word-motions*
 wordcount()	eval.txt	/*wordcount()*
 workbench	starting.txt	/*workbench*
 workshop	workshop.txt	/*workshop*
-workshop-commands	workshop.txt	/*workshop-commands*
-workshop-compiling	workshop.txt	/*workshop-compiling*
-workshop-configure	workshop.txt	/*workshop-configure*
-workshop-intro	workshop.txt	/*workshop-intro*
 workshop-support	workshop.txt	/*workshop-support*
-workshop-xpm	workshop.txt	/*workshop-xpm*
 workshop.txt	workshop.txt	/*workshop.txt*
 wrap-off	intro.txt	/*wrap-off*
 write-compiler-plugin	usr_41.txt	/*write-compiler-plugin*

runtime/doc/tagsrch.txt

@@ -1,4 +1,4 @@
-*tagsrch.txt*   For Vim version 8.1.  Last change: 2018 May 04
+*tagsrch.txt*   For Vim version 8.1.  Last change: 2019 Feb 25
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -179,6 +179,9 @@ commands explained above the tag stack will look like this:
    1  1 main		1  harddisk2:text/vim/test
    2  1 FuncB	       59  harddisk2:text/vim/src/main.c
 
+The |gettagstack()| function returns the tag stack of a specified window. The
+|settagstack()| function modifies the tag stack of a window.
+
 							*E73*
 When you try to use the tag stack while it doesn't contain anything you will
 get an error message.
@@ -568,7 +571,14 @@ only supported by new versions of ctags (such as Exuberant ctags).
 {term}		;" The two characters semicolon and double quote.  This is
 		interpreted by Vi as the start of a comment, which makes the
 		following be ignored.  This is for backwards compatibility
-		with Vi, it ignores the following fields.
+		with Vi, it ignores the following fields. Example:
+			APP	file	/^static int APP;$/;"	v
+		When {tagaddress} is not a line number or search pattern, then
+		{term} must be |;".  Here the bar ends the command (excluding
+		the bar) and ;" is used to have Vi ignore the rest of the
+		line.  Example:
+			APP	file.c	call cursor(3, 4)|;"	v
+
 {field} ..	A list of optional fields.  Each field has the form:
 
 			<Tab>{fieldname}:{value}
@@ -603,8 +613,7 @@ ignored.  (Case is ignored when 'ignorecase' is set and 'tagcase' is
 The value '2' should be used then:
 	!_TAG_FILE_SORTED<Tab>2<Tab>{anything} ~
 
-The other tag that Vim recognizes, but only when compiled with the
-|+multi_byte| feature, is the encoding of the tags file:
+The other tag that Vim recognizes is the encoding of the tags file:
 	!_TAG_FILE_ENCODING<Tab>utf-8<Tab>{anything} ~
 Here "utf-8" is the encoding used for the tags.  Vim will then convert the tag
 being searched for from 'encoding' to the encoding of the tags file.  And when

runtime/doc/term.txt

@@ -1,4 +1,4 @@
-*term.txt*      For Vim version 8.1.  Last change: 2017 Oct 14
+*term.txt*      For Vim version 8.1.  Last change: 2019 Jan 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -334,11 +334,15 @@ Added by Vim (there are no standard codes for these):
 	t_EI	end insert or replace mode (block cursor shape)	*t_EI* *'t_EI'*
 		|termcap-cursor-shape|
 	t_RV	request terminal version string (for xterm)	*t_RV* *'t_RV'*
-		|xterm-8bit| |v:termresponse| |'ttymouse'| |xterm-codes|
+		The response is stored in |v:termresponse|
+		|xterm-8bit| |'ttymouse'| |xterm-codes|
 	t_u7	request cursor position (for xterm)		*t_u7* *'t_u7'*
 		see |'ambiwidth'|
+		The response is stored in |v:termu7resp|
 	t_RF	request terminal foreground color		*t_RF* *'t_RF'*
+		The response is stored in |v:termrfgresp|
 	t_RB	request terminal background color		*t_RB* *'t_RB'*
+		The response is stored in |v:termrbgresp|
 	t_8f	set foreground color (R, G, B)			*t_8f* *'t_8f'*
 		|xterm-true-color|
 	t_8b	set background color (R, G, B)			*t_8b* *'t_8b'*
@@ -351,7 +355,9 @@ Added by Vim (there are no standard codes for these):
 	t_EC	set cursor color end				*t_EC* *'t_EC'*
 	t_SH	set cursor shape				*t_SH* *'t_SH'*
 	t_RC	request terminal cursor blinking		*t_RC* *'t_RC'*
+		The response is stored in |v:termblinkresp|
 	t_RS	request terminal cursor style			*t_RS* *'t_RS'*
+		The response is stored in |v:termstyleresp|
 	t_ST	save window title to stack			*t_ST* *'t_ST'*
 	t_RT	restore window title from stack			*t_RT* *'t_RT'*
 	t_Si	save icon text to stack				*t_Si* *'t_Si'*

runtime/doc/terminal.txt

@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 8.1.  Last change: 2018 May 17
+*terminal.txt*	For Vim version 8.1.  Last change: 2019 Feb 25
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -44,7 +44,7 @@ If the result is "1" you have it.
 
 {Vi does not have any of these commands}
 {only available when compiled with the |+terminal| feature}
-The terminal feature requires the |+multi_byte|, |+job| and |+channel| features.
+The terminal feature requires the |+job| and |+channel| features.
 
 ==============================================================================
 1. Basic use						*terminal-use*
@@ -66,20 +66,23 @@ When the keyboard focus is in the terminal window, typed keys will be sent to
 the job.  This uses a pty when possible.  You can click outside of the
 terminal window to move keyboard focus elsewhere.
 
+						*t_CTRL-W_CTRL-W* *t_CTRL-W_:*
 CTRL-W can be used to navigate between windows and other CTRL-W commands, e.g.:
 	CTRL-W CTRL-W	move focus to the next window
 	CTRL-W :	enter an Ex command
 See |CTRL-W| for more commands.
 
-Special in the terminal window:			*CTRL-W_.*  *CTRL-W_N* 
+Special in the terminal window:			*t_CTRL-W_.*  *t_CTRL-W_N* 
 	CTRL-W .	send a CTRL-W to the job in the terminal
 	CTRL-W CTRL-\	send a CTRL-\ to the job in the terminal
 	CTRL-W N	go to Terminal-Normal mode, see |Terminal-mode|
 	CTRL-\ CTRL-N   go to Terminal-Normal mode, see |Terminal-mode|
-	CTRL-W " {reg}  paste register {reg}		*CTRL-W_quote*
+	CTRL-W " {reg}  paste register {reg}		*t_CTRL-W_quote*
 			Also works with the = register to insert the result of
 			evaluating an expression.
 	CTRL-W CTRL-C	ends the job, see below |t_CTRL-W_CTRL-C|
+	CTRL-W gt	go to next tabpage, same as `gt`	*t_CTRL-W_gt*
+	CTRL-W gT	go to previous tabpage, same as `gT`	*t_CTRL-W_gT*
 
 See option 'termwinkey' for specifying another key instead of CTRL-W that
 will work like CTRL-W.  However, typing 'termwinkey' twice sends 'termwinkey'
@@ -90,8 +93,8 @@ to the job.  For example:
 	'termwinkey' .	       send 'termwinkey' to the job in the terminal
 	'termwinkey' CTRL-\    send a CTRL-\ to the job in the terminal
 	'termwinkey' N	       go to terminal Normal mode, see below
-	'termwinkey' CTRL-N    same as CTRL-W N
-	'termwinkey' CTRL-C    same as |t_CTRL-W_CTRL-C|
+	'termwinkey' CTRL-N    same as CTRL-W N |t_CTRL-W_N|
+	'termwinkey' CTRL-C    same as CTRL-W CTRL-C |t_CTRL-W_CTRL-C|
 							*t_CTRL-\_CTRL-N*
 The special key combination CTRL-\ CTRL-N can be used to switch to Normal
 mode, just like this works in any other mode.
@@ -110,10 +113,13 @@ sent to the job running in the terminal.  For example, to make F1 switch
 to Terminal-Normal mode: >
    tnoremap <F1> <C-W>N
 You can use Esc, but you need to make sure it won't cause other keys to
-break: >
+break (cursor keys start with an Esc, so they may break): >
    tnoremap <Esc> <C-W>N
    set notimeout ttimeout timeoutlen=100
 
+You can also create menus similar to terminal mode mappings, but you have to
+use |:tlmenu| instead of |:tmenu|.
+
 <							*options-in-terminal*
 After opening the terminal window and setting 'buftype' to "terminal" the
 TerminalOpen autocommand event is triggered.  This makes it possible to set
@@ -225,9 +231,16 @@ Syntax ~
 					for Python "++eof=exit()".  Special
 					codes can be used like with `:map`,
 					e.g. "<C-Z>" for CTRL-Z.
+			++type={pty}	(MS-Windows only): Use {pty} as the
+					virtual console.  See 'termwintype'
+					for the values.
 
 			If you want to use more options use the |term_start()|
 			function.
+			If you want to split the window vertically, use: >
+				:vertical terminal
+<			Or short: >
+				:vert ter
 
 When the buffer associated with the terminal is forcibly unloaded or wiped out
 the job is killed, similar to calling `job_stop(job, "kill")` .
@@ -403,6 +416,13 @@ Just put the files somewhere in your PATH.  You can set the 'winptydll' option
 to point to the right file, if needed.  If you have both the 32-bit and 64-bit
 version, rename to winpty32.dll and winpty64.dll to match the way Vim was
 build.
+							*ConPTY* *E982*
+On more recent versions of MS-Windows 10 (beginning with the "October 2018
+Update"), winpty is no longer required. On those versions, |:terminal| will use
+Windows' built-in support for hosting terminal applications, "ConPTY".  When
+ConPTY is in use, there may be rendering artifacts regarding ambiguous-width
+characters. If you encounter any such issues, install "winpty".  Until the
+ConPTY problems have been fixed "winpty" will be preferred.
 
 Environment variables are used to pass information to the running job:
     VIM_SERVERNAME	v:servername
@@ -613,7 +633,18 @@ This will open a window consisting of three parts:
 3.  The contents of the second dump
 
 You can usually see what differs in the second part.  Use the 'ruler' to
-relate it to the position in the first or second dump.
+relate it to the position in the first or second dump.  Letters indicate the
+kind of difference:
+	X	different character
+	>	cursor in first but not in second
+	<	cursor in second but not in first
+	w	character width differs (single vs double width)
+	f	foreground color differs
+	b	background color differs
+	a	attribute differs (bold, underline, reverse, etc.)
+	?	character missing in both
+	+	character missing in first
+	-	character missing in second
 
 Alternatively, press "s" to swap the first and second dump. Do this several
 times so that you can spot the difference in the context of the text.

runtime/doc/textprop.txt

@@ -0,0 +1,138 @@
+*textprop.txt*  For Vim version 8.1.  Last change: 2019 Jan 08
+
+
+		  VIM REFERENCE MANUAL    by Bram Moolenaar
+
+
+Displaying text with properties attached.		*text-properties*
+
+THIS IS UNDER DEVELOPMENT - ANYTHING MAY STILL CHANGE  *E967*
+
+What is not working yet:
+- Adjusting column/length when inserting text
+- Text properties spanning more than one line
+- prop_find()
+- callbacks when text properties are outdated
+
+
+1. Introduction			|text-prop-intro|
+2. Functions			|text-prop-functions|
+3. When text changes		|text-prop-changes|
+
+
+{Vi does not have text properties}
+{not able to use text properties when the |+textprop| feature was
+disabled at compile time}
+
+==============================================================================
+1. Introduction						*text-prop-intro*
+
+Text properties can be attached to text in a buffer.  They will move with the
+text: If lines are deleted or inserted the properties move with the text they
+are attached to.  Also when inserting/deleting text in the line before the
+text property.  And when inserting/deleting text inside the text property, it
+will increase/decrease in size.
+
+The main use for text properties is to highlight text.  This can be seen as a
+replacement for syntax highlighting.  Instead of defining patterns to match
+the text, the highlighting is set by a script, possibly using the output of an
+external parser.  This only needs to be done once, not every time when
+redrawing the screen, thus can be much faster, after the initial cost of
+attaching the text properties.
+
+Text properties can also be used for other purposes to identify text.  For
+example, add a text property on a function name, so that a search can be
+defined to jump to the next/previous function.
+
+A text property is attached at a specific line and column, and has a specified
+length.  The property can span multiple lines.
+
+A text property has these fields:
+	"id"		a number to be used as desired
+	"type"		the name of a property type
+
+
+Property Types ~
+							*E971*
+A text property normally has the name of a property type, which defines 
+how to highlight the text.  The property type can have these entries:
+	"highlight"	name of the highlight group to use
+	"priority"	when properties overlap, the one with the highest
+			priority will be used.
+	"start_incl"	when TRUE inserts at the start position will be
+			included in the text property
+	"end_incl"    	when TRUE inserts at the end position will be
+			included in the text property
+
+
+Example ~
+
+Suppose line 11 in a buffer has this text (excluding the indent):
+
+	The number 123 is smaller than 4567.
+
+To highlight the numbers in this text: >
+	call prop_type_add('number', {'highlight': 'Constant'})
+	call prop_add(11, 12, {'length': 3, 'type': 'number'})
+	call prop_add(11, 32, {'length': 4, 'type': 'number'})
+
+Try inserting or deleting lines above the text, you will see that the text
+properties stick to the text, thus the line number is adjusted as needed.
+
+Setting "start_incl" and "end_incl" is useful when white space surrounds the
+text, e.g. for a function name.  Using false is useful when the text starts
+and/or ends with a specific character, such as the quote surrounding a string.
+
+	func FuncName(arg) ~
+	     ^^^^^^^^        property with start_incl and end_incl set
+
+	var = "text"; ~
+	      ^^^^^^	     property with start_incl and end_incl not set
+
+Nevertheless, when text is inserted or deleted the text may need to be parsed
+and the text properties updated.  But this can be done asynchronously.
+
+==============================================================================
+2. Functions						*text-prop-functions*
+
+Manipulating text property types:
+
+prop_type_add({name}, {props})		define a new property type
+prop_type_change({name}, {props})	change an existing property type
+prop_type_delete({name} [, {props}])	delete a property type
+prop_type_get([{name} [, {props}])	get property type values
+prop_type_list([{props}])		get list of property types
+
+
+Manipulating text properties:
+
+prop_add({lnum}, {col}, {props})  	add a text property
+prop_clear({lnum} [, {lnum-end} [, {bufnr}]])
+					remove all text properties
+prop_find({props} [, {direction}])	search for a text property
+prop_list({lnum} [, {props})  		text properties in {lnum}
+prop_remove({props} [, {lnum} [, {lnum-end}]])
+					remove a text property
+
+==============================================================================
+3. When text changes				*text-prop-changes*
+
+Vim will do its best to keep the text properties on the text where it was
+attached.  When inserting or deleting text the properties after the change
+will move accordingly.
+
+When text is deleted and a text property no longer includes any text, it is
+deleted.  However, a text property that was defined as zero-width will remain,
+unless the whole line is deleted.
+
+When using replace mode, the text properties stay on the same character
+positions, even though the characters themselves change.
+
+
+When text property columns are not updated ~
+
+- When setting the line with |setline()| or through an interface, such as Lua,
+  Tcl or Python.
+
+
+ vim:tw=78:ts=8:noet:ft=help:norl: