patch 8.1.0403: header file missing from distribution

Problem:    Header file missing from distribution.
Solution:   Add src/protodef.h.

.travis.yml

@@ -10,19 +10,19 @@ compiler:
   - gcc
 
 env:
+  - BUILD=yes TEST=test COVERAGE=no FEATURES=tiny  CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+    # ASAN build
+  - BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+    FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan" LSAN_OPTIONS="suppressions=$TRAVIS_BUILD_DIR/src/testdir/lsan-suppress.txt"
+    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
   - BUILD=yes TEST=scripttests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
     "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
   - BUILD=no TEST=unittests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=yes
   - BUILD=yes TEST=test COVERAGE=no FEATURES=normal CONFOPT= SHADOWOPT="-C src/shadow" SRCDIR=./src/shadow CHECK_AUTOCONF=no
   - BUILD=yes TEST=test COVERAGE=no FEATURES=small CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-  - BUILD=yes TEST=test COVERAGE=no FEATURES=tiny  CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
     # Mac OSX build
   - BUILD=yes TEST=test COVERAGE=no FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
     "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
-    # ASAN build
-  - BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
-    FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan" LSAN_OPTIONS="suppressions=$TRAVIS_BUILD_DIR/src/testdir/lsan-suppress.txt"
-    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp'"
 
 sudo: false
 

Filelist

@@ -1,5 +1,5 @@
 # List of distributed Vim files.
-# Used by Makefile and upload.aap.
+# Used by Makefile.
 
 # source files for all source archives
 SRC_ALL =	\
@@ -101,9 +101,7 @@ SRC_ALL =	\
 		src/window.c \
 		src/tee/tee.c \
 		src/xxd/xxd.c \
-		src/main.aap \
 		src/testdir/gen_opt_test.vim \
-		src/testdir/main.aap \
 		src/testdir/README.txt \
 		src/testdir/Make_all.mak \
 		src/testdir/*.in \
@@ -143,6 +141,7 @@ SRC_ALL =	\
 		src/testdir/if_ver*.vim \
 		src/testdir/color_ramp.vim \
 		src/proto.h \
+		src/protodef.h \
 		src/proto/arabic.pro \
 		src/proto/beval.pro \
 		src/proto/blowfish.pro \
@@ -275,6 +274,22 @@ SRC_ALL =	\
 		src/libvterm/t/92lp1640917.test \
 		src/libvterm/t/harness.c \
 		src/libvterm/t/run-test.pl \
+		src/xdiff/COPYING \
+		src/xdiff/README.txt \
+		src/xdiff/xdiff.h \
+		src/xdiff/xdiffi.c \
+		src/xdiff/xdiffi.h \
+		src/xdiff/xemit.c \
+		src/xdiff/xemit.h \
+		src/xdiff/xhistogram.c \
+		src/xdiff/xinclude.h \
+		src/xdiff/xmacros.h \
+		src/xdiff/xpatience.c \
+		src/xdiff/xprepare.c \
+		src/xdiff/xprepare.h \
+		src/xdiff/xtypes.h \
+		src/xdiff/xutils.c \
+		src/xdiff/xutils.h \
 
 
 # source files for Unix only
@@ -291,7 +306,6 @@ SRC_UNIX =	\
 		src/INSTALLx.txt \
 		src/Makefile \
 		src/auto/configure \
-		src/config.aap.in \
 		src/config.h.in \
 		src/config.mk.dist \
 		src/config.mk.in \
@@ -612,7 +626,6 @@ RT_ALL =	\
 		runtime/macros/matchit.vim \
 		runtime/macros/maze/README.txt \
 		runtime/macros/maze/[mM]akefile \
-		runtime/macros/maze/main.aap \
 		runtime/macros/maze/maze.c \
 		runtime/macros/maze/maze_5.78 \
 		runtime/macros/maze/maze_mac \
@@ -640,6 +653,7 @@ RT_ALL =	\
 		runtime/tutor/tutor \
 		runtime/tutor/tutor.vim \
 		runtime/vimrc_example.vim \
+		runtime/pack/dist/opt/cfilter/plugin/cfilter.vim \
 		runtime/pack/dist/opt/dvorak/plugin/dvorak.vim \
 		runtime/pack/dist/opt/dvorak/dvorak/enable.vim \
 		runtime/pack/dist/opt/dvorak/dvorak/disable.vim \

README.md

@@ -2,9 +2,10 @@
 
 [![Build Status](https://travis-ci.org/vim/vim.svg?branch=master)](https://travis-ci.org/vim/vim)
 [![Coverage Status](https://codecov.io/gh/vim/vim/coverage.svg?branch=master)](https://codecov.io/gh/vim/vim?branch=master)
-[![Coverage Status](https://coveralls.io/repos/vim/vim/badge.svg?branch=master&service=github)](https://coveralls.io/github/vim/vim?branch=master)
+[![Coverage Status](https://coveralls.io/repos/github/vim/vim/badge.svg?branch=master)](https://coveralls.io/github/vim/vim?branch=master)
 [![Appveyor Build status](https://ci.appveyor.com/api/projects/status/o2qht2kjm02sgghk?svg=true)](https://ci.appveyor.com/project/chrisbra/vim)
 [![Coverity Scan](https://scan.coverity.com/projects/241/badge.svg)](https://scan.coverity.com/projects/vim)
+[![Language Grade: C/C++](https://img.shields.io/lgtm/grade/cpp/g/vim/vim.svg?logo=lgtm&logoWidth=18)](https://lgtm.com/projects/g/vim/vim/context:cpp)
 [![Debian CI](https://badges.debian.net/badges/debian/testing/vim/version.svg)](https://buildd.debian.org/vim)
 
 

runtime/autoload/ccomplete.vim

@@ -1,7 +1,7 @@
 " Vim completion script
 " Language:	C
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2012 Jun 20
+" Last Change:	2018 Aug 20
 
 let s:cpo_save = &cpo
 set cpo&vim
@@ -72,8 +72,10 @@ function! ccomplete#Complete(findstart, base)
   " Split item in words, keep empty word after "." or "->".
   " "aa" -> ['aa'], "aa." -> ['aa', ''], "aa.bb" -> ['aa', 'bb'], etc.
   " We can't use split, because we need to skip nested [...].
+  " "aa[...]" -> ['aa', '[...]'], "aa.bb[...]" -> ['aa', 'bb', '[...]'], etc.
   let items = []
   let s = 0
+  let arrays = 0
   while 1
     let e = match(base, '\.\|->\|\[', s)
     if e < 0
@@ -107,6 +109,7 @@ function! ccomplete#Complete(findstart, base)
       endwhile
       let e += 1
       call add(items, strpart(base, s, e - s))
+      let arrays += 1
       let s = e
     endif
   endwhile
@@ -161,15 +164,26 @@ function! ccomplete#Complete(findstart, base)
 	endif
       endif
       let res = [{'match': match, 'tagline' : '', 'kind' : kind, 'info' : line}]
+    elseif len(items) == arrays + 1
+      " Completing one word and it's a local array variable: build tagline
+      " from declaration line
+      let match = items[0]
+      let kind = 'v'
+      let tagline = "\t/^" . line . '$/'
+      let res = [{'match': match, 'tagline' : tagline, 'kind' : kind, 'info' : line}]
     else
       " Completing "var.", "var.something", etc.
       let res = s:Nextitem(strpart(line, 0, col), items[1:], 0, 1)
     endif
   endif
 
-  if len(items) == 1
+  if len(items) == 1 || len(items) == arrays + 1
     " Only one part, no "." or "->": complete from tags file.
-    let tags = taglist('^' . base)
+    if len(items) == 1
+      let tags = taglist('^' . base)
+    else
+      let tags = taglist('^' . items[0] . '$')
+    endif
 
     " Remove members, these can't appear without something in front.
     call filter(tags, 'has_key(v:val, "kind") ? v:val["kind"] != "m" : 1')
@@ -516,11 +530,24 @@ function! s:StructMembers(typename, items, all)
     endif
   endif
 
+  " Skip over [...] items
+  let idx = 0
+  while 1
+    if idx >= len(a:items)
+      let target = ''		" No further items, matching all members
+      break
+    endif
+    if a:items[idx][0] != '['
+      let target = a:items[idx]
+      break
+    endif
+    let idx += 1
+  endwhile
   " Put matching members in matches[].
   let matches = []
   for l in qflist
     let memb = matchstr(l['text'], '[^\t]*')
-    if memb =~ '^' . a:items[0]
+    if memb =~ '^' . target
       " Skip matches local to another file.
       if match(l['text'], "\tfile:") < 0 || bufnr('%') == bufnr(matchstr(l['text'], '\t\zs[^\t]*'))
 	let item = {'match': memb, 'tagline': l['text']}
@@ -540,8 +567,8 @@ function! s:StructMembers(typename, items, all)
   endfor
 
   if len(matches) > 0
-    " Skip over [...] items
-    let idx = 1
+    " Skip over next [...] items
+    let idx += 1
     while 1
       if idx >= len(a:items)
 	return matches		" No further items, return the result.

runtime/autoload/dist/ft.vim

@@ -632,7 +632,7 @@ endfunc
 " Choose context, plaintex, or tex (LaTeX) based on these rules:
 " 1. Check the first line of the file for "%&<format>".
 " 2. Check the first 1000 non-comment lines for LaTeX or ConTeXt keywords.
-" 3. Default to "latex" or to g:tex_flavor, can be set in user's vimrc.
+" 3. Default to "plain" or to g:tex_flavor, can be set in user's vimrc.
 func dist#ft#FTtex()
   let firstline = getline(1)
   if firstline =~ '^%&\s*\a\+'

runtime/autoload/tar.vim

@@ -152,10 +152,12 @@ fun! tar#Browse(tarfile)
    " assuming cygwin
    let tarfile=substitute(system("cygpath -u ".shellescape(tarfile,0)),'\n$','','e')
   endif
+
   let curlast= line("$")
   if tarfile =~# '\.\(gz\|tgz\)$'
+    let gzip_command = s:get_gzip_command(tarfile)
 "   call Decho("1: exe silent r! gzip -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - ")
-   exe "sil! r! gzip -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
+   exe "sil! r! " . gzip_command . " -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
   elseif tarfile =~# '\.lrp'
 "   call Decho("2: exe silent r! cat -- ".shellescape(tarfile,1)."|gzip -d -c -|".g:tar_cmd." -".g:tar_browseoptions." - ")
    exe "sil! r! cat -- ".shellescape(tarfile,1)."|gzip -d -c -|".g:tar_cmd." -".g:tar_browseoptions." - "
@@ -287,12 +289,14 @@ fun! tar#Read(fname,mode)
   else
    let tar_secure= " "
   endif
+
   if tarfile =~# '\.bz2$'
 "   call Decho("7: exe silent r! bzip2 -d -c ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp)
    exe "sil! r! bzip2 -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
   elseif tarfile =~# '\.\(gz\|tgz\)$'
+    let gzip_command = s:get_gzip_command(tarfile)
 "   call Decho("5: exe silent r! gzip -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd.' -'.g:tar_readoptions.' - '.tar_secure.shellescape(fname,1))
-   exe "sil! r! gzip -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
+   exe "sil! r! " . gzip_command . " -d -c -- ".shellescape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
   elseif tarfile =~# '\.lrp$'
 "   call Decho("6: exe silent r! cat ".shellescape(tarfile,1)." | gzip -d -c - | ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp)
    exe "sil! r! cat -- ".shellescape(tarfile,1)." | gzip -d -c - | ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.shellescape(fname,1).decmp
@@ -389,6 +393,8 @@ fun! tar#Write(fname)
   let tarfile = substitute(b:tarfile,'tarfile:\(.\{-}\)::.*$','\1','')
   let fname   = substitute(b:tarfile,'tarfile:.\{-}::\(.*\)$','\1','')
 
+  let gzip_command = s:get_gzip_command(tarfile)
+
   " handle compressed archives
   if tarfile =~# '\.bz2'
    call system("bzip2 -d -- ".shellescape(tarfile,0))
@@ -396,12 +402,12 @@ fun! tar#Write(fname)
    let compress= "bzip2 -- ".shellescape(tarfile,0)
 "   call Decho("compress<".compress.">")
   elseif tarfile =~# '\.gz'
-   call system("gzip -d -- ".shellescape(tarfile,0))
+   call system(gzip_command . " -d -- ".shellescape(tarfile,0))
    let tarfile = substitute(tarfile,'\.gz','','e')
    let compress= "gzip -- ".shellescape(tarfile,0)
 "   call Decho("compress<".compress.">")
   elseif tarfile =~# '\.tgz'
-   call system("gzip -d -- ".shellescape(tarfile,0))
+   call system(gzip_command . " -d -- ".shellescape(tarfile,0))
    let tarfile = substitute(tarfile,'\.tgz','.tar','e')
    let compress= "gzip -- ".shellescape(tarfile,0)
    let tgz     = 1
@@ -581,7 +587,10 @@ fun! tar#Vimuntar(...)
 
   " if necessary, decompress the tarball; then, extract it
   if tartail =~ '\.tgz'
-   if executable("gunzip")
+   let gzip_command = s:get_gzip_command(tarfile)
+   if executable(gzip_command)
+    silent exe "!" . gzip_command . " -d ".shellescape(tartail)
+   elseif executable("gunzip")
     silent exe "!gunzip ".shellescape(tartail)
    elseif executable("gzip")
     silent exe "!gzip -d ".shellescape(tartail)
@@ -619,6 +628,28 @@ fun! tar#Vimuntar(...)
 "  call Dret("tar#Vimuntar")
 endfun
 
+func s:get_gzip_command(file)
+  " Try using the "file" command to get the actual compression type, since
+  " there is no standard way for the naming: ".tgz", ".tbz", ".txz", etc.
+  " If the "file" command doesn't work fall back to just using the file name.
+  if a:file =~# 'z$'
+    let filetype = system('file ' . a:file)
+    if filetype =~ 'bzip2 compressed' && executable('bzip2')
+      return 'bzip2'
+    endif
+    if filetype =~ 'XZ compressed' && executable('xz')
+      return 'xz'
+    endif
+  endif
+  if a:file =~# 'bz2$'
+    return 'bzip2'
+  endif
+  if a:file =~# 'xz$'
+    return 'xz'
+  endif
+  return 'gzip'
+endfunc
+
 " =====================================================================
 " Modelines And Restoration: {{{1
 let &cpo= s:keepcpo

runtime/compiler/stack.vim

@@ -0,0 +1,37 @@
+" Vim compiler file
+" Compiler:         Haskell Stack
+" Maintainer:       Daniel Campoverde <alx@sillybytes.net>
+" Latest Revision:  2018-08-27
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "stack"
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+
+CompilerSet errorformat=
+    \%-G%.%#:\ build\ %.%#,
+    \%-G%.%#:\ configure\ %.%#,
+    \%-G[%.%#]%.%#,
+    \%-G%.%#preprocessing\ %.%#,
+    \%-G%.%#configuring\ %.%#,
+    \%-G%.%#building\ %.%#,
+    \%-G%.%#linking\ %.%#,
+    \%-G%.%#installing\ %.%#,
+    \%-G%.%#registering\ %.%#,
+    \%-G%.%#:\ copy/register%.%#,
+    \%-G%.%#process\ exited\ %.%#,
+    \%-G%.%#--builddir=%.%#,
+    \%-G--%.%#,
+    \%-G%.%#\|%.%#,
+    \%E%f:%l:%c:\ error:,%+Z\ \ \ \ %m,
+    \%E%f:%l:%c:\ error:\ %m,%-Z,
+    \%W%f:%l:%c:\ warning:,%+Z\ \ \ \ %m,
+    \%W%f:%l:%c:\ warning:\ %m,%-Z,
+
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/doc/autocmd.txt

@@ -656,12 +656,17 @@ FileChangedRO			Before making the first change to a read-only
 							*E881*
 				If the number of lines changes saving for undo
 				may fail and the change will be aborted.
+							*DiffUpdated*
+DiffUpdated			After diffs have been updated.  Depending on
+				what kind of diff is being used (internal or
+				external) this can be triggered on every
+				change or when doing |:diffupdate|.
 							*DirChanged*
 DirChanged			The working directory has changed in response
 				to the |:cd| or |:lcd| commands, or as a
 				result of the 'autochdir' option.
 				The pattern can be:
-					"window" to trigger on `:lcd
+					"window" to trigger on `:lcd`
 					"global" to trigger on `:cd`
 					"auto"   to trigger on 'autochdir'.
 					"drop"	 to trigger on editing a file

runtime/doc/change.txt

@@ -1447,7 +1447,7 @@ to the name of an external program for Vim to use for text formatting.  The
 program.
 
                                                         *format-formatexpr*
-The 'formatexpr' option can be set to a Vim Script function that performs
+The 'formatexpr' option can be set to a Vim script function that performs
 reformatting of the buffer.  This should usually happen in an |ftplugin|,
 since formatting is highly dependent on the type of file.  It makes
 sense to use an |autoload| script, so the corresponding script is only loaded
@@ -1481,7 +1481,7 @@ text.  Put it in your autoload directory, e.g. ~/.vim/autoload/format.vim: >
 
 You can then enable the formatting by executing: >
   setlocal formatexpr=format#Format()
->
+
 Note: this function explicitly returns non-zero when called from insert mode
 (which basically means, text is inserted beyond the 'textwidth' limit).  This
 causes Vim to fall back to reformat the text by using the internal formatter.

runtime/doc/channel.txt

@@ -163,6 +163,9 @@ Use |ch_status()| to see if the channel could be opened.
 				The "close_cb" is also considered for this.
 		    "never"	All messages will be kept.
 
+							*channel-noblock*
+"noblock"	Same effect as |job-noblock|.  Only matters for writing.
+
 							*waittime*
 "waittime"	The time to wait for the connection to be made in
 		milliseconds.  A negative number waits forever.
@@ -594,6 +597,17 @@ See |job_setoptions()| and |ch_setoptions()|.
 			Note: when writing to a file or buffer and when
 			reading from a buffer NL mode is used by default.
 
+						*job-noblock*
+"noblock": 1		When writing use a non-blocking write call.  This
+			avoids getting stuck if Vim should handle other
+			messages in between, e.g. when a job sends back data
+			to Vim.  It implies that when `ch_sendraw()` returns
+			not all data may have been written yet.
+			This option was added in patch 8.1.0350, test with: >
+				if has("patch-8.1.350")
+				  let options['noblock'] = 1
+				endif
+<
 						*job-callback*
 "callback": handler	Callback for something to read on any part of the
 			channel.

runtime/doc/cmdline.txt

@@ -832,11 +832,12 @@ it, no matter how many backslashes.
 	   \\#			\#
 Also see |`=|.
 
-			       *:<cword>* *:<cWORD>* *:<cfile>* *<cfile>*
-			       *:<sfile>* *<sfile>* *:<afile>* *<afile>*
-			       *:<abuf>* *<abuf>* *:<amatch>* *<amatch>*
-			       *:<cexpr>* *<cexpr>*
-			       *<slnum>* *E495* *E496* *E497* *E499* *E500*
+			       *:<cword>* *<cword>* *:<cWORD>* *<cWORD>*
+			       *:<cexpr>* *<cexpr>* *:<cfile>* *<cfile>*
+			       *:<afile>* *<afile>* *:<abuf>* *<abuf>*
+			       *:<amatch>* *<amatch>*
+			       *:<sfile>* *<sfile>* *:<slnum>* *<slnum>*
+			       *:<sflnum>* *<sflnum>* *E499* *E500*
 Note: these are typed literally, they are not special keys!
 	<cword>    is replaced with the word under the cursor (like |star|)
 	<cWORD>    is replaced with the WORD under the cursor (see |WORD|)
@@ -849,15 +850,16 @@ Note: these are typed literally, they are not special keys!
 		   |gf| uses)
 	<afile>    When executing autocommands, is replaced with the file name
 		   of the buffer being manipulated, or the file for a read or
-		   write.
+		   write.  *E495*
 	<abuf>     When executing autocommands, is replaced with the currently
 		   effective buffer number (for ":r file" and ":so file" it is
 		   the current buffer, the file being read/sourced is not in a
-		   buffer).
+		   buffer).  *E496*
 	<amatch>   When executing autocommands, is replaced with the match for
-		   which this autocommand was executed.  It differs from
-		   <afile> only when the file name isn't used to match with
-		   (for FileType, Syntax and SpellFileMissing events).
+		   which this autocommand was executed.  *E497*
+		   It differs from <afile> only when the file name isn't used
+		   to match with (for FileType, Syntax and SpellFileMissing
+		   events).
 	<sfile>    When executing a ":source" command, is replaced with the
 		   file name of the sourced file.  *E498*
 		   When executing a function, is replaced with:
@@ -867,9 +869,12 @@ Note: these are typed literally, they are not special keys!
 		   Note that filename-modifiers are useless when <sfile> is
 		   used inside a function.
 	<slnum>	   When executing a ":source" command, is replaced with the
-	           line number.  *E842*
+		   line number.  *E842*
 		   When executing a function it's the line number relative to
 		   the start of the function.
+	<sflnum>   When executing a script, is replaced with the line number.
+		   It differs from <slnum> in that <sflnum> is replaced with
+		   the script line number in any situation.  *E961*
 
 							 *filename-modifiers*
 *:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs* *::S*

runtime/doc/diff.txt

@@ -39,7 +39,9 @@ The second and following arguments may also be a directory name.  Vim will
 then append the file name of the first argument to the directory name to find
 the file.
 
-This only works when a standard "diff" command is available.  See 'diffexpr'.
+By default an internal diff library will be used.  When 'diffopt' or
+'diffexpr' has been set an external "diff" command will be used.  This only
+works when such a diff program is available.
 
 Diffs are local to the current tab page |tab-page|.  You can't see diffs with
 a window in another tab page.  This does make it possible to have several
@@ -344,8 +346,9 @@ between file1 and file2: >
 
 The ">" is replaced with the value of 'shellredir'.
 
-The output of "diff" must be a normal "ed" style diff.  Do NOT use a context
-diff.  This example explains the format that Vim expects: >
+The output of "diff" must be a normal "ed" style diff or a unified diff.  Do
+NOT use a context diff.  This example explains the format that Vim expects for
+the "ed" style diff: >
 
 	1a2
 	> bbb
@@ -384,12 +387,16 @@ Example (this does almost the same as 'diffexpr' being empty): >
 	   endif
 	   silent execute "!diff -a --binary " . opt . v:fname_in . " " . v:fname_new .
 		\  " > " . v:fname_out
+	   redraw!
 	endfunction
 
 The "-a" argument is used to force comparing the files as text, comparing as
 binaries isn't useful.  The "--binary" argument makes the files read in binary
 mode, so that a CTRL-Z doesn't end the text on DOS.
 
+The `redraw!` command may not be needed, depending on whether executing a
+shell command shows something on the display or not.
+
 						*E810* *E97*
 Vim will do a test if the diff output looks alright.  If it doesn't, you will
 get an error message.  Possible causes:

runtime/doc/eval.txt

@@ -954,6 +954,13 @@ These three can be repeated and mixed.  Examples:
 
 expr8							*expr8*
 -----
+This expression is either |expr9| or a sequence of the alternatives below,
+in any order.  E.g., these are all possible:
+	expr9[expr1].name
+	expr9.name[expr1]
+	expr9(expr1, ...)[expr1].name
+
+
 expr8[expr1]		item of String or |List|	*expr-[]* *E111*
 							*E909* *subscript*
 If expr8 is a Number or String this results in a String that contains the
@@ -2111,7 +2118,7 @@ cursor({list})			Number	move cursor to position in {list}
 debugbreak({pid})		Number  interrupt process being debugged
 deepcopy({expr} [, {noref}])	any	make a full copy of {expr}
 delete({fname} [, {flags}])	Number	delete the file or directory {fname}
-deletebufline({expr}, {first}[, {last}])
+deletebufline({expr}, {first} [, {last}])
 				Number	delete lines from buffer {expr}
 did_filetype()			Number	|TRUE| if FileType autocmd event used
 diff_filler({lnum})		Number	diff filler lines about {lnum}
@@ -2409,6 +2416,8 @@ submatch({nr} [, {list}])	String or List
 					specific match in ":s" or substitute()
 substitute({expr}, {pat}, {sub}, {flags})
 				String	all {pat} in {expr} replaced with {sub}
+swapinfo({fname})		Dict	information about swap file {fname}
+swapname({expr})		String	swap file of buffer {expr}
 synID({lnum}, {col}, {trans})	Number	syntax ID at {lnum} and {col}
 synIDattr({synID}, {what} [, {mode}])
 				String	attribute {what} of syntax ID {synID}
@@ -2465,7 +2474,10 @@ test_null_job()			Job	null value for testing
 test_null_list()		List	null value for testing
 test_null_partial()		Funcref	null value for testing
 test_null_string()		String	null value for testing
+test_option_not_set({name})    none	reset flag indicating option was set
 test_override({expr}, {val})    none	test with Vim internal overrides
+test_scrollbar({which}, {value}, {dragging})
+				none	scroll in the GUI for testing
 test_settime({expr})		none	set current time for testing
 timer_info([{id}])		List	information about timers
 timer_pause({id}, {pause})	none	pause or unpause a timer
@@ -2477,7 +2489,7 @@ tolower({expr})			String	the String {expr} switched to lowercase
 toupper({expr})			String	the String {expr} switched to uppercase
 tr({src}, {fromstr}, {tostr})	String	translate chars of {src} in {fromstr}
 					to chars in {tostr}
-trim({text}[, {mask}])		String	trim characters in {mask} from {text}
+trim({text} [, {mask}])		String	trim characters in {mask} from {text}
 trunc({expr})			Float	truncate Float {expr}
 type({name})			Number	type of variable {name}
 undofile({name})		String	undo file name for {name}
@@ -2497,6 +2509,7 @@ win_screenpos({nr})		List	get screen position of window {nr}
 winbufnr({nr})			Number	buffer number of window {nr}
 wincol()			Number	window column of the cursor
 winheight({nr})			Number	height of window {nr}
+winlayout([{tabnr}])		List	layout of windows in tab {tabnr}
 winline()			Number	window line of the cursor
 winnr([{expr}])			Number	number of current window
 winrestcmd()			String	returns command to restore window sizes
@@ -3529,7 +3542,7 @@ delete({fname} [, {flags}])					*delete()*
 		To delete a line from the buffer use |:delete| or
 		|deletebufline()|.
 
-deletebufline({expr}, {first}[, {last}])		*deletebufline()*
+deletebufline({expr}, {first} [, {last}])		*deletebufline()*
 		Delete lines {first} to {last} (inclusive) from buffer {expr}.
 		If {last} is omitted then delete line {first} only.
 		On success 0 is returned, on failure 1 is returned.
@@ -3789,7 +3802,10 @@ expand({expr} [, {nosuf} [, {list}]])				*expand()*
 			<abuf>		autocmd buffer number (as a String!)
 			<amatch>	autocmd matched name
 			<sfile>		sourced script file or function name
-			<slnum>		sourced script file line number
+			<slnum>		sourced script line number or function
+					line number
+			<sflnum>	script file line number, also when in
+					a function
 			<cword>		word under the cursor
 			<cWORD>		WORD under the cursor
 			<client>	the {clientid} of the last received
@@ -4307,7 +4323,7 @@ getbufinfo([{dict}])
 			endfor
 <
 		To get buffer-local options use: >
-			getbufvar({bufnr}, '&')
+			getbufvar({bufnr}, '&option_name')
 
 <
 							*getbufline()*
@@ -4720,6 +4736,10 @@ getloclist({nr} [, {what}])				*getloclist()*
 		If the optional {what} dictionary argument is supplied, then
 		returns the items listed in {what} as a dictionary. Refer to
 		|getqflist()| for the supported items in {what}.
+		If {what} contains 'filewinid', then returns the id of the
+		window used to display files from the location list. This
+		field is applicable only when called from a location list
+		window.
 
 getmatches()						*getmatches()*
 		Returns a |List| with all matches previously defined by
@@ -5918,6 +5938,7 @@ maparg({name} [, {mode} [, {abbr} [, {dict}]]])			*maparg()*
 				     (|mapmode-ic|)
 		  "sid"	     The script local ID, used for <sid> mappings
 			     (|<SID>|).
+		  "lnum"     The line number in "sid", zero if unknown.
 		  "nowait"   Do not wait for other, longer mappings.
 			     (|:map-<nowait>|).
 
@@ -5965,11 +5986,14 @@ match({expr}, {pat} [, {start} [, {count}]])			*match()*
 		When {expr} is a |List| then this returns the index of the
 		first item where {pat} matches.  Each item is used as a
 		String, |Lists| and |Dictionaries| are used as echoed.
+
 		Otherwise, {expr} is used as a String.  The result is a
 		Number, which gives the index (byte offset) in {expr} where
 		{pat} matches.
+
 		A match at the first character or |List| item returns zero.
 		If there is no match -1 is returned.
+
 		For getting submatches see |matchlist()|.
 		Example: >
 			:echo match("testing", "ing")	" results in 4
@@ -8000,6 +8024,32 @@ substitute({expr}, {pat}, {sub}, {flags})		*substitute()*
 		|submatch()| returns.  Example: >
 		   :echo substitute(s, '%\(\x\x\)', {m -> '0x' . m[1]}, 'g')
 
+swapinfo({fname})					*swapinfo()*
+		The result is a dictionary, which holds information about the
+		swapfile {fname}. The available fields are:
+			version VIM version
+			user	user name
+			host	host name
+			fname	original file name
+			pid	PID of the VIM process that created the swap
+				file
+			mtime	last modification time in seconds
+			inode	Optional: INODE number of the file
+			dirty	1 if file was modified, 0 if not
+		Note that "user" and "host" are truncated to at most 39 bytes.
+		In case of failure an "error" item is added with the reason:
+			Cannot open file: file not found or in accessible
+			Cannot read file: cannot read first block
+			Not a swap file: does not contain correct block ID
+			Magic number mismatch: Info in first block is invalid
+
+swapname({expr})					*swapname()*
+		The result is the swap file path of the buffer {expr}.
+		For the use of {expr}, see |bufname()| above.
+		If buffer {expr} is the current buffer, the result is equal to
+		|:swapname| (unless no swap file).
+		If buffer {expr} has no swap file, returns an empty string.
+
 synID({lnum}, {col}, {trans})				*synID()*
 		The result is a Number, which is the syntax ID at the position
 		{lnum} and {col} in the current window.
@@ -8354,7 +8404,9 @@ term_dumpwrite({buf}, {filename} [, {options}])
 		Dump the contents of the terminal screen of {buf} in the file
 		{filename}.  This uses a format that can be used with
 		|term_dumpload()| and |term_dumpdiff()|.
-		If {filename} already exists an error is given.	*E953*
+		If the job in the terminal already finished an error is given:
+		*E958*
+		If {filename} already exists an error is given:	*E953*
 		Also see |terminal-diff|.
 
 		{options} is a dictionary with these optional entries:
@@ -8591,9 +8643,8 @@ term_start({cmd}, {options})				*term_start()*
 		|job-options|.  However, not all options can be used.  These
 		are supported:
 		   all timeout options
-		   "stoponexit"
-		   "callback", "out_cb", "err_cb"
-		   "exit_cb", "close_cb"
+		   "stoponexit", "cwd", "env"
+		   "callback", "out_cb", "err_cb", "exit_cb", "close_cb"
 		   "in_io", "in_top", "in_bot", "in_name", "in_buf"
 		   "out_io", "out_name", "out_buf", "out_modifiable", "out_msg"
 		   "err_io", "err_name", "err_buf", "err_modifiable", "err_msg"
@@ -8697,6 +8748,15 @@ test_null_partial()					*test_null_partial()*
 test_null_string()					*test_null_string()*
 		Return a String that is null. Only useful for testing.
 
+test_option_not_set({name})				*test_option_not_set()*
+		Reset the flag that indicates option {name} was set.  Thus it
+		looks like it still has the default value. Use like this: >
+			set ambiwidth=double
+			call test_option_not_set('ambiwidth')
+<		Now the 'ambiwidth' option behaves like it was never changed,
+		even though the value is "double".
+		Only to be used for testing!
+
 test_override({name}, {val})				*test_override()*
 		Overrides certain parts of Vims internal processing to be able
 		to run tests. Only to be used for testing Vim!
@@ -8706,6 +8766,7 @@ test_override({name}, {val})				*test_override()*
 
 		name	     effect when {val} is non-zero ~
 		redraw       disable the redrawing() function
+		redraw_flag  ignore the RedrawingDisabled flag
 		char_avail   disable the char_avail() function
 		starting     reset the "starting" variable, see below
 		nfa_fail     makes the NFA regexp engine fail to force a
@@ -8722,6 +8783,23 @@ test_override({name}, {val})				*test_override()*
 <		The value of "starting" is saved.  It is restored by: >
 			call test_override('starting', 0)
 
+test_scrollbar({which}, {value}, {dragging})		*test_scrollbar()*
+		Pretend using scrollbar {which} to move it to position
+		{value}.  {which} can be:
+			left	Left scrollbar of the current window
+			right	Right scrollbar of the current window
+			hor	Horizontal scrollbar
+
+		For the vertical scrollbars {value} can be 1 to the
+		line-count of the buffer.  For the horizontal scrollbar the
+		{value} can be between 1 and the maximum line length, assuming
+		'wrap' is not set.
+
+		When {dragging} is non-zero it's like dragging the scrollbar,
+		otherwise it's like clicking in the scrollbar.
+		Only works when the {which} scrollbar actually exists,
+		obviously only when using the GUI.
+
 test_settime({expr})					*test_settime()*
 		Set the time Vim uses internally.  Currently only used for
 		timestamps in the history, as they are used in viminfo, and
@@ -8837,7 +8915,7 @@ tr({src}, {fromstr}, {tostr})				*tr()*
 			echo tr("<blob>", "<>", "{}")
 <		returns "{blob}"
 
-trim({text}[, {mask}])						*trim()*
+trim({text} [, {mask}])						*trim()*
 		Return {text} as a String where any character in {mask} is
 		removed from the beginning and  end of {text}.
 		If {mask} is not given, {mask} is all characters up to 0x20,
@@ -9088,6 +9166,35 @@ winheight({nr})						*winheight()*
 		This excludes any window toolbar line.
 		Examples: >
   :echo "The current window has " . winheight(0) . " lines."
+<
+winlayout([{tabnr}])					*winlayout()*
+		The result is a nested List containing the layout of windows
+		in a tabpage.
+
+		Without {tabnr} use the current tabpage, otherwise the tabpage
+		with number {tabnr}. If the tabpage {tabnr} is not found,
+		returns an empty list.
+
+		For a leaf window, it returns:
+			['leaf', {winid}]
+		For horizontally split windows, which form a column, it
+		returns:
+			['col', [{nested list of windows}]]
+		For vertically split windows, which form a row, it returns:
+			['row', [{nested list of windows}]]
+
+		Example: >
+			" Only one window in the tab page
+			:echo winlayout()
+			['leaf', 1000]
+			" Two horizontally split windows
+			:echo winlayout()
+			['col', [['leaf', 1000], ['leaf', 1001]]]
+			" Three horizontally split windows, with two
+			" vertically split windows in the middle window
+			:echo winlayout(2)
+			['col', [['leaf', 1002], ['row', ['leaf', 1003],
+					     ['leaf', 1001]]], ['leaf', 1000]]
 <
 							*winline()*
 winline()	The result is a Number, which is the screen line of the cursor

runtime/doc/filetype.txt

@@ -638,11 +638,31 @@ By default the following options are set, in accordance with PEP8: >
 
 	setlocal expandtab shiftwidth=4 softtabstop=4 tabstop=8
 
-To disable this behaviour, set the following variable in your vimrc: >
+To disable this behavior, set the following variable in your vimrc: >
 
 	let g:python_recommended_style = 0
 
 
+R MARKDOWN						*ft-rmd-plugin*
+
+By default ftplugin/html.vim is not sourced. If you want it sourced, add to
+your |vimrc|: >
+	let rmd_include_html = 1
+
+The 'formatexpr' option is set dynamically with different values for R code
+and for Markdown code. If you prefer that 'formatexpr' is not set, add to your
+|vimrc|: >
+	let rmd_dynamic_comments = 0
+
+
+R RESTRUCTURED TEXT					*ft-rrst-plugin*
+
+The 'formatexpr' option is set dynamically with different values for R code
+and for ReStructured text. If you prefer that 'formatexpr' is not set, add to
+your |vimrc|: >
+	let rrst_dynamic_comments = 0
+
+
 RPM SPEC						*ft-spec-plugin*
 
 Since the text for this plugin is rather long it has been put in a separate

runtime/doc/ft_rust.txt

@@ -236,4 +236,4 @@ It also has a few other mappings:
 			Note: This binding is only available in MacVim.
 
 ==============================================================================
- vim:tw=78:sw=4:noet:ts=8:ft=help:norl:
+ vim:tw=78:sw=4:ts=8:noet:ft=help:norl:

runtime/doc/gui_x11.txt

@@ -376,8 +376,8 @@ you might have to use the file ~/.gtkrc-2.0 instead, depending on your
 distribution.
 
 For GTK+ 3, an effect similar to the above can be obtained by adding the
-following snippet of CSS code to $XDG_HOME_DIR/gtk-3.0/gtk.css (usually,
-$HOME/.config/gtk-3.0/gtk.css):
+following snippet of CSS code to $XDG_HOME_DIR/gtk-3.0/gtk.css (see the next
+section):
 
 For GTK+ 3 < 3.20: >
 
@@ -408,6 +408,10 @@ stable support for GTK+ CSS:
 GTK+ uses CSS for styling and layout of widgets.  In this subsection, we'll
 have a quick look at GTK+ CSS through simple, illustrative examples.
 
+You can usually edit the config with: >
+	vim $HOME/.config/gtk-3.0/gtk.css
+
+
 Example 1.  Empty Space Adjustment ~
 
 By default, the toolbar and the tabline of the GTK+ 3 GUI are somewhat larger
@@ -492,6 +496,16 @@ unexpectedly less attractive or even deteriorates their usability.  Keep this
 in mind always when you try improving a theme.
 
 
+Example 3.  border color
+
+To eliminate borders when maximized: >
+
+    @define-color bg_color #1B2B34;
+    #vim-main-window {
+	background-color: @bg_color;
+    }
+
+
 Using Vim as a GTK+ plugin ~
 							*gui-gtk-socketid*
 When the GTK+ version of Vim starts up normally, it creates its own top level

runtime/doc/if_perl.txt

@@ -44,8 +44,9 @@ The Perl patches for Vim were made by:
 	Sven Verdoolaege <skimo@breughel.ufsia.ac.be>
 	Matt Gerassimof
 
-Perl for MS-Windows can be found at: http://www.perl.com/
-The ActiveState one should work.
+Perl for MS-Windows (and other platforms) can be found at:
+http://www.perl.org/ The ActiveState one should work, Strawberry Perl is a
+good alternative.
 
 ==============================================================================
 3. Using the Perl interface				*perl-using*

runtime/doc/if_pyth.txt

@@ -81,6 +81,18 @@ Examples:
 >
 	:pydo return "%s\t%d" % (line[::-1], len(line))
 	:pydo if line: return "%4d: %s" % (linenr, line)
+<
+One can use `:pydo` in possible conjunction with `:py` to filter a range using
+python. For example: >
+
+	:py3 << EOF
+	needle = vim.eval('@a')
+	replacement = vim.eval('@b')
+
+	def py_vim_string_replace(str):
+		return str.replace(needle, replacement)
+	EOF
+	:'<,'>py3do return py_vim_string_replace(line)
 <
 							*:pyfile* *:pyf*
 :[range]pyf[ile] {file}
@@ -168,11 +180,15 @@ vim.eval(str)						*python-eval*
 	- a dictionary if the Vim expression evaluates to a Vim dictionary
 	Dictionaries and lists are recursively expanded.
 	Examples: >
+	    :" value of the 'textwidth' option
 	    :py text_width = vim.eval("&tw")
-	    :py str = vim.eval("12+12")		# NB result is a string! Use
-						# string.atoi() to convert to
-						# a number.
-
+	    :
+	    :" contents of the 'a' register
+	    :py a_reg = vim.eval("@a") 
+	    :
+	    :" Result is a string! Use string.atoi() to convert to a number.
+	    :py str = vim.eval("12+12")
+	    :
 	    :py tagList = vim.eval('taglist("eval_expr")')
 <	The latter will return a python list of python dicts, for instance:
 	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name': ~

runtime/doc/indent.txt

@@ -978,6 +978,11 @@ Below is an example of indentation with and without this option enabled:
        paste(x)                                      paste(x)
    }                                             }
 <
+The code will be indented after lines that match the pattern
+`'\(&\||\|+\|-\|\*\|/\|=\|\~\|%\|->\)\s*$'`. If you want indentation after
+lines that match a different pattern, you should set the appropriate value of
+`r_indent_op_pattern` in your |vimrc|.
+
 
 SHELL							*ft-sh-indent*
 

runtime/doc/insert.txt

@@ -1051,13 +1051,13 @@ The function must return the column where the completion starts.  It must be a
 number between zero and the cursor column "col('.')".  This involves looking
 at the characters just before the cursor and including those characters that
 could be part of the completed item.  The text between this column and the
-cursor column will be replaced with the matches.
+cursor column will be replaced with the matches.  If the returned value is
+larger than the cursor column, the cursor column is used.
 
-Special return values:
-   -1 If no completion can be done, the completion will be cancelled with an
-      error message.
-   -2 To cancel silently and stay in completion mode.
-   -3 To cancel silently and leave completion mode.
+Negative return values:
+   -2 	To cancel silently and stay in completion mode.
+   -3 	To cancel silently and leave completion mode.
+   Another negative value: completion starts at the cursor column
 
 On the second invocation the arguments are:
    a:findstart  0

runtime/doc/intro.txt

@@ -595,9 +595,9 @@ Virtual Replace mode	Virtual Replace mode is similar to Replace mode, but
 			If the 'showmode' option is on "-- VREPLACE --" is
 			shown at the bottom of the window.
 
-Insert Normal mode	Entered when CTRL-O given in Insert mode.  This is
-			like Normal mode, but after executing one command Vim
-			returns to Insert mode.
+Insert Normal mode	Entered when CTRL-O is typed in Insert mode (see
+			|i_CTRL-O|).  This is like Normal mode, but after
+			executing one command Vim returns to Insert mode.
 			If the 'showmode' option is on "-- (insert) --" is
 			shown at the bottom of the window.
 

runtime/doc/options.txt

@@ -846,6 +846,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'{A-Z0-9}, or `{A-Z0-9} command takes one to another file.
 	Note that for some commands the 'autowrite' option is not used, see
 	'autowriteall' for that.
+	Some buffers will not be written, specifically when 'buftype' is
+	"nowrite", "nofile", "terminal" or "prompt".
 
 			 *'autowriteall'* *'awa'* *'noautowriteall'* *'noawa'*
 'autowriteall' 'awa'	boolean	(default off)
@@ -1054,6 +1056,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 	  name, precede it with a backslash.
 	- To include a comma in a directory name precede it with a backslash.
 	- A directory name may end in an '/'.
+	- For Unix and Win32, if a directory ends in two path separators "//",
+	  the swap file name will be built from the complete path to the file
+	  with all path separators changed to percent '%' signs. This will
+	  ensure file name uniqueness in the backup directory.
+	  On Win32, it is also possible to end with "\\".  However, When a
+	  separating comma is following, you must use "//", since "\\" will
+	  include the comma in the file name. Therefore it is recommended to
+	  use '//', instead of '\\'.
 	- Environment variables are expanded |:set_env|.
 	- Careful with '\' characters, type one before a space, type two to
 	  get one in the option (see |option-backslash|), for example: >
@@ -2599,13 +2609,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 			{not available when compiled without the |+diff|
 			feature}
-	Expression which is evaluated to obtain an ed-style diff file from two
-	versions of a file.  See |diff-diffexpr|.
+	Expression which is evaluated to obtain a diff file (either ed-style
+	or unified-style) from two versions of a file.  See |diff-diffexpr|.
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
 						*'dip'* *'diffopt'*
-'diffopt' 'dip'		string	(default "filler")
+'diffopt' 'dip'		string	(default "internal,filler")
 			global
 			{not in Vi}
 			{not available when compiled without the |+diff|
@@ -2647,11 +2657,31 @@ A jump table for the options with a short description can be found at |Q_op|.
 		foldcolumn:{n}	Set the 'foldcolumn' option to {n} when
 				starting diff mode.  Without this 2 is used.
 
-	Examples: >
+		internal	Use the internal diff library.  This is
+				ignored when 'diffexpr' is set.  *E960*
+				When running out of memory when writing a
+				buffer this item will be ignored for diffs
+				involving that buffer.  Set the 'verbose'
+				option to see when this happens.
 
-		:set diffopt=filler,context:4
+		indent-heuristic
+                                 Use the indent heuristic for the internal
+                                 diff library.
+
+                algorithm:{text} Use the specified diff algorithm with the
+				internal diff engine. Currently supported 
+				algorithms are:
+				myers      the default algorithm
+				minimal    spend extra time to generate the
+					   smallest possible diff
+				patience   patience diff algorithm
+				histogram  histogram diff algorithm
+
+	Examples: >
+		:set diffopt=internal,filler,context:4
 		:set diffopt=
-		:set diffopt=filler,foldcolumn:3
+		:set diffopt=internal,filler,foldcolumn:3
+		:set diffopt-=internal  " do NOT use the internal diff parser
 <
 				     *'digraph'* *'dg'* *'nodigraph'* *'nodg'*
 'digraph' 'dg'		boolean	(default off)
@@ -2680,12 +2710,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 	- A directory starting with "./" (or ".\" for MS-DOS et al.) means to
 	  put the swap file relative to where the edited file is.  The leading
 	  "." is replaced with the path name of the edited file.
-	- For Unix and Win32, if a directory ends in two path separators "//"
-	  or "\\", the swap file name will be built from the complete path to
-	  the file with all path separators substituted to percent '%' signs.
-	  This will ensure file name uniqueness in the preserve directory.
-	  On Win32, when a separating comma is following, you must use "//",
-	  since "\\" will include the comma in the file name.
+	- For Unix and Win32, if a directory ends in two path separators "//",
+	  the swap file name will be built from the complete path to the file
+	  with all path separators substituted to percent '%' signs. This will
+	  ensure file name uniqueness in the preserve directory.
+	  On Win32, it is also possible to end with "\\".  However, When a
+	  separating comma is following, you must use "//", since "\\" will
+	  include the comma in the file name. Therefore it is recommended to
+	  use '//', instead of '\\'.
 	- Spaces after the comma are ignored, other spaces are considered part
 	  of the directory name.  To have a space at the start of a directory
 	  name, precede it with a backslash.
@@ -4363,7 +4395,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	methods.  Use 'imdisable' to disable XIM then.
 
 	You can set 'imactivatefunc' and 'imstatusfunc' to handle IME/XIM
-	via external command if vim is not compiled with the |+xim|,
+	via external command if Vim is not compiled with the |+xim|,
 	|+multi_byte_ime| or |global-ime|.
 
 						*'imsearch'* *'ims'*
@@ -4470,7 +4502,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	so far, matches.  The matched string is highlighted.  If the pattern
 	is invalid or not found, nothing is shown.  The screen will be updated
 	often, this is only useful on fast terminals.
-	Note that the match will be shown, but the cursor will return to its
+	Also applies to the pattern in commands: >
+		:global
+		:lvimgrep
+		:lvimgrepadd
+		:smagic
+		:snomagic
+		:sort
+		:substitute
+		:vglobal
+		:vimgrep
+		:vimgrepadd
+<	Note that the match will be shown, but the cursor will return to its
 	original position when no match is found and when pressing <Esc>.  You
 	still need to finish the search command with <Enter> to move the
 	cursor to the match.
@@ -4483,9 +4526,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The highlighting can be set with the 'i' flag in 'highlight'.
 	When 'hlsearch' is on, all matched strings are highlighted too while
 	typing a search command. See also: 'hlsearch'.
-	If you don't want turn 'hlsearch' on, but want to highlight all matches
-	while searching, you can turn on and off 'hlsearch' with autocmd.
-	Example: >
+	If you don't want to turn 'hlsearch' on, but want to highlight all
+	matches while searching, you can turn on and off 'hlsearch' with
+	autocmd.  Example: >
 		augroup vimrc-incsearch-highlight
 		  autocmd!
 		  autocmd CmdlineEnter /,\? :set hlsearch
@@ -6640,7 +6683,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   tabpages	all tab pages; without this only the current tab page
 			is restored, so that you can make a session for each
 			tab page separately
-	   terminal	include terminal windows where the command can be restored
+	   terminal	include terminal windows where the command can be
+			restored
 	   unix		with Unix end-of-line format (single <NL>), even when
 			on Windows or DOS
 	   winpos	position of the whole Vim window
@@ -6676,7 +6720,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Example with escaped space (Vim will do this when initializing the
 	option from $SHELL): >
 		:set shell=/bin/with\\\ space/sh
-<	The resulting value of 'shell' is  "/bin/with\ space/sh", two
+<	The resulting value of 'shell' is "/bin/with\ space/sh", two
 	backslashes are consumed by `:set`.
 
 	Under MS-Windows, when the executable ends in ".com" it must be
@@ -7502,7 +7546,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	line is displayed.  The current buffer and current window will be set
 	temporarily to that of the window (and buffer) whose statusline is
 	currently being drawn.  The expression will evaluate in this context.
-	The variable "actual_curbuf" is set to the 'bufnr()' number of the
+	The variable "g:actual_curbuf" is set to the `bufnr()` number of the
 	real current buffer.
 
 	The 'statusline' option will be evaluated in the |sandbox| if set from

runtime/doc/os_qnx.txt

@@ -135,4 +135,4 @@ Todo:
 	- Replace usage of fork() with spawn() when launching external
 	  programs.
 
- vim:tw=78:sw=4:ts=8:noet:ts=8:ft=help:norl:
+ vim:tw=78:sw=4:ts=8:noet:ft=help:norl:

runtime/doc/print.txt

@@ -46,6 +46,8 @@ Note: If you have problems printing with |:hardcopy|, an alternative is to use
 			'printexpr' through |v:cmdarg|.  Otherwise [arguments]
 			is ignored.  'printoptions' can be used to specify
 			paper size, duplex, etc.
+			Note: If you want PDF, there are tools such as
+			"ps2pdf" that can convert the PostScript to PDF.
 
 :[range]ha[rdcopy][!] >{filename}
 			As above, but write the resulting PostScript in file

runtime/doc/quickfix.txt

@@ -46,7 +46,7 @@ compiler (see |errorformat| below).
 
 							*quickfix-ID*
 Each quickfix list has a unique identifier called the quickfix ID and this
-number will not change within a Vim session. The getqflist() function can be
+number will not change within a Vim session. The |getqflist()| function can be
 used to get the identifier assigned to a list. There is also a quickfix list
 number which may change whenever more than ten lists are added to a quickfix
 stack.
@@ -68,7 +68,7 @@ the location list is destroyed.
 Every quickfix and location list has a read-only changedtick variable that
 tracks the total number of changes made to the list.  Every time the quickfix
 list is modified, this count is incremented. This can be used to perform an
-action only when the list has changed.  The getqflist() and getloclist()
+action only when the list has changed.  The |getqflist()| and |getloclist()|
 functions can be used to query the current value of changedtick.  You cannot
 change the changedtick variable.
 
@@ -602,7 +602,7 @@ present).  Examples: >
 	echo getloclist(2, {'winid' : 1}).winid
 <
 							*getqflist-examples*
-The getqflist() and getloclist() functions can be used to get the various
+The |getqflist()| and |getloclist()| functions can be used to get the various
 attributes of a quickfix and location list respectively. Some examples for
 using these functions are below:
 >
@@ -659,7 +659,7 @@ using these functions are below:
     :echo getloclist(3, {'winid' : 0}).winid
 <
 							*setqflist-examples*
-The setqflist() and setloclist() functions can be used to set the various
+The |setqflist()| and |setloclist()| functions can be used to set the various
 attributes of a quickfix and location list respectively. Some examples for
 using these functions are below:
 >
@@ -1551,6 +1551,22 @@ The backslashes before the pipe character are required to avoid it to be
 recognized as a command separator.  The backslash before each space is
 required for the set command.
 
+						*cfilter-plugin*
+If you have too many matching messages, you can use the cfilter plugin to
+reduce the number of entries.  Load the plugin with: >
+   packadd cfilter
+
+Then you can use these command: >
+   :Cfilter[!] /{pat}/
+   :Lfilter[!] /{pat}/
+
+:Cfilter creates a new quickfix list from entries matching {pat} in the
+current quickfix list. Both the file name and the text of the entries are
+matched against {pat}. If ! is supplied, then entries not matching {pat} are
+used.
+
+:Lfilter does the same as :Cfilter but operates on the current location list.
+
 =============================================================================
 8. The directory stack				*quickfix-directory-stack*
 

runtime/doc/repeat.txt

@@ -465,6 +465,16 @@ flag when defining the function, it is not relevant when executing it. >
    .
    :endfunction
    :set cpo-=C
+<
+					*line-continuation-comment*
+To add a comment in between the lines start with '\" '.  Notice the space
+after the double quote.  Example: >
+	let array = [
+		"\ first entry comment
+		\ 'first',
+		"\ second entry comment
+		\ 'second',
+		\ ]
 
 Rationale:
 	Most programs work with a trailing backslash to indicate line
@@ -473,6 +483,14 @@ Rationale:
 		:map xx  asdf\
 <	Therefore the unusual leading backslash is used.
 
+	Starting a comment in a continuation line results in all following
+	continuation lines to be part of the comment.  Since it was like this
+	for a long time, when making it possible to add a comment halfway a
+	sequence of continuation lines, it was not possible to use \", since
+	that was a valid continuation line.  Using '"\ ' comes closest, even
+	though it may look a bit weird.  Requiring the space after the
+	backslash is to make it very unlikely this is a normal comment line.
+
 ==============================================================================
 5. Using Vim packages					*packages*
 

runtime/doc/starting.txt

@@ -487,7 +487,8 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 
 		When {vimrc} is equal to "DEFAULTS" (all uppercase), this has
 		the same effect as "NONE", but the |defaults.vim| script is
-		loaded, which will also set 'nocompatible'.
+		loaded, which will also set 'nocompatible'.  Also see
+		|--clean|.
 
 		Using the "-u" argument with another argument than DEFAULTS
 		has the side effect that the 'compatible' option will be on by
@@ -520,7 +521,7 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 		  'nocompatible': use Vim defaults
 		- no |gvimrc| script is loaded
 		- no viminfo file is read or written
-		- the home directory is excluded from 'runtimepath'
+
 							*-x*
 -x		Use encryption to read/write files.  Will prompt for a key,
 		which is then stored in the 'key' option.  All writes will

runtime/doc/syntax.txt

@@ -1265,7 +1265,7 @@ doxygen_javadoc_autobrief	1	Set to 0 to disable javadoc autobrief
 doxygen_end_punctuation		'[.]'	Set to regexp match for the ending
 					punctuation of brief
 
-There are also some hilight groups worth mentioning as they can be useful in
+There are also some highlight groups worth mentioning as they can be useful in
 configuration.
 
 Highlight			Effect ~
@@ -2641,6 +2641,48 @@ Any combination of these three variables is legal, but might highlight more
 commands than are actually available to you by the game.
 
 
+R							*r.vim* *ft-r-syntax*
+
+The parsing of R code for syntax highlight starts 40 lines backwards, but you
+can set a different value in your |vimrc|. Example: >
+	let r_syntax_minlines = 60
+
+You can also turn off syntax highlighting of ROxygen: >
+	let r_syntax_hl_roxygen = 0
+
+enable folding of code delimited by parentheses, square brackets and curly
+braces: >
+	let r_syntax_folding = 1
+
+and highlight as functions all keywords followed by an opening parenthesis: >
+	let r_syntax_fun_pattern = 1
+
+
+R MARKDOWN					*rmd.vim* *ft-rmd-syntax*
+
+To disable syntax highlight of YAML header, add to your |vimrc|: >
+	let rmd_syn_hl_yaml = 0
+
+To disable syntax highlighting of citation keys: >
+	let rmd_syn_hl_citations = 0
+
+To highlight R code in knitr chunk headers: >
+	let rmd_syn_hl_chunk = 1
+
+By default, chunks of R code will be highlighted following the rules of R
+language. If you want proper syntax highlighting of chunks of other languages,
+you should add them to either `markdown_fenced_languages` or
+`rmd_fenced_languages`. For example to properly highlight both R and Python,
+you may add this to your |vimrc|: >
+	let rmd_fenced_languages = ['r', 'python']
+
+
+R RESTRUCTURED TEXT				*rrst.vim* *ft-rrst-syntax*
+
+To highlight R code in knitr chunk headers, add to your |vimrc|: >
+	let rrst_syn_hl_chunk = 1
+
+
 READLINE				*readline.vim* *ft-readline-syntax*
 
 The readline library is primarily used by the BASH shell, which adds quite a
@@ -3169,6 +3211,12 @@ by syntax/tex.vim.  Please consider uploading any extensions that you write,
 which typically would go in $HOME/after/syntax/tex/[pkgname].vim, to
 http://vim.sf.net/.
 
+I've included some support for various popular packages on my website: >
+
+	http://www.drchip.org/astronaut/vim/index.html#LATEXPKGS
+<
+The syntax files there go into your .../after/syntax/tex/ directory.
+
 					*tex-error* *g:tex_no_error*
  Tex: Excessive Error Highlighting? ~
 

runtime/doc/tabpage.txt

@@ -241,8 +241,10 @@ REORDERING TAB PAGES:
 :tabm[ove] [N]						*:tabm* *:tabmove*
 :[N]tabm[ove]
 		Move the current tab page to after tab page N.  Use zero to
-		make the current tab page the first one.  Without N the tab
-		page is made the last one. >
+		make the current tab page the first one.  N is counted before
+		the move, thus if the second tab is the current one,
+		`:tabmove 1` and `:tabmove 2`  have no effect.
+		Without N the tab page is made the last one. >
 		    :.tabmove	" do nothing
 		    :-tabmove	" move the tab page to the left
 		    :+tabmove	" move the tab page to the right

runtime/doc/tags

@@ -991,13 +991,17 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 't_RF'	term.txt	/*'t_RF'*
 't_RI'	term.txt	/*'t_RI'*
 't_RS'	term.txt	/*'t_RS'*
+'t_RT'	term.txt	/*'t_RT'*
 't_RV'	term.txt	/*'t_RV'*
+'t_Ri'	term.txt	/*'t_Ri'*
 't_SC'	term.txt	/*'t_SC'*
 't_SH'	term.txt	/*'t_SH'*
 't_SI'	term.txt	/*'t_SI'*
 't_SR'	term.txt	/*'t_SR'*
+'t_ST'	term.txt	/*'t_ST'*
 't_Sb'	term.txt	/*'t_Sb'*
 't_Sf'	term.txt	/*'t_Sf'*
+'t_Si'	term.txt	/*'t_Si'*
 't_Te'	term.txt	/*'t_Te'*
 't_Ts'	term.txt	/*'t_Ts'*
 't_VS'	term.txt	/*'t_VS'*
@@ -4622,6 +4626,7 @@ E954	options.txt	/*E954*
 E955	eval.txt	/*E955*
 E956	pattern.txt	/*E956*
 E957	eval.txt	/*E957*
+E958	eval.txt	/*E958*
 E96	diff.txt	/*E96*
 E97	diff.txt	/*E97*
 E98	diff.txt	/*E98*
@@ -5404,6 +5409,7 @@ catch-order	eval.txt	/*catch-order*
 catch-text	eval.txt	/*catch-text*
 cc	change.txt	/*cc*
 ceil()	eval.txt	/*ceil()*
+cfilter-plugin	quickfix.txt	/*cfilter-plugin*
 ch.vim	syntax.txt	/*ch.vim*
 ch_canread()	eval.txt	/*ch_canread()*
 ch_close()	eval.txt	/*ch_close()*
@@ -5458,6 +5464,7 @@ channel-drop	channel.txt	/*channel-drop*
 channel-functions	usr_41.txt	/*channel-functions*
 channel-mode	channel.txt	/*channel-mode*
 channel-more	channel.txt	/*channel-more*
+channel-noblock	channel.txt	/*channel-noblock*
 channel-open	channel.txt	/*channel-open*
 channel-open-options	channel.txt	/*channel-open-options*
 channel-raw	channel.txt	/*channel-raw*
@@ -6266,8 +6273,13 @@ ft-python-plugin	filetype.txt	/*ft-python-plugin*
 ft-python-syntax	syntax.txt	/*ft-python-syntax*
 ft-quake-syntax	syntax.txt	/*ft-quake-syntax*
 ft-r-indent	indent.txt	/*ft-r-indent*
+ft-r-syntax	syntax.txt	/*ft-r-syntax*
 ft-readline-syntax	syntax.txt	/*ft-readline-syntax*
 ft-rexx-syntax	syntax.txt	/*ft-rexx-syntax*
+ft-rmd-plugin	filetype.txt	/*ft-rmd-plugin*
+ft-rmd-syntax	syntax.txt	/*ft-rmd-syntax*
+ft-rrst-plugin	filetype.txt	/*ft-rrst-plugin*
+ft-rrst-syntax	syntax.txt	/*ft-rrst-syntax*
 ft-rst-syntax	syntax.txt	/*ft-rst-syntax*
 ft-ruby-omni	insert.txt	/*ft-ruby-omni*
 ft-ruby-syntax	syntax.txt	/*ft-ruby-syntax*
@@ -7173,6 +7185,7 @@ job-err_io	channel.txt	/*job-err_io*
 job-exit_cb	channel.txt	/*job-exit_cb*
 job-functions	usr_41.txt	/*job-functions*
 job-in_io	channel.txt	/*job-in_io*
+job-noblock	channel.txt	/*job-noblock*
 job-options	channel.txt	/*job-options*
 job-out_cb	channel.txt	/*job-out_cb*
 job-out_io	channel.txt	/*job-out_io*
@@ -8196,6 +8209,7 @@ quotes.txt	quotes.txt	/*quotes.txt*
 quotestar	gui.txt	/*quotestar*
 quote~	change.txt	/*quote~*
 r	change.txt	/*r*
+r.vim	syntax.txt	/*r.vim*
 range()	eval.txt	/*range()*
 raw-terminal-mode	term.txt	/*raw-terminal-mode*
 rcp	pi_netrw.txt	/*rcp*
@@ -8260,8 +8274,10 @@ right-justify	change.txt	/*right-justify*
 rileft	rileft.txt	/*rileft*
 rileft.txt	rileft.txt	/*rileft.txt*
 riscos	os_risc.txt	/*riscos*
+rmd.vim	syntax.txt	/*rmd.vim*
 rot13	change.txt	/*rot13*
 round()	eval.txt	/*round()*
+rrst.vim	syntax.txt	/*rrst.vim*
 rst.vim	syntax.txt	/*rst.vim*
 rsync	pi_netrw.txt	/*rsync*
 ruby	if_ruby.txt	/*ruby*
@@ -8647,6 +8663,7 @@ swap-file	recover.txt	/*swap-file*
 swapchoice-variable	eval.txt	/*swapchoice-variable*
 swapcommand-variable	eval.txt	/*swapcommand-variable*
 swapfile-changed	version4.txt	/*swapfile-changed*
+swapinfo()	eval.txt	/*swapinfo()*
 swapname-variable	eval.txt	/*swapname-variable*
 sybase	ft_sql.txt	/*sybase*
 syn-sync-grouphere	syntax.txt	/*syn-sync-grouphere*
@@ -8744,13 +8761,17 @@ t_RC	term.txt	/*t_RC*
 t_RF	term.txt	/*t_RF*
 t_RI	term.txt	/*t_RI*
 t_RS	term.txt	/*t_RS*
+t_RT	term.txt	/*t_RT*
 t_RV	term.txt	/*t_RV*
+t_Ri	term.txt	/*t_Ri*
 t_SC	term.txt	/*t_SC*
 t_SH	term.txt	/*t_SH*
 t_SI	term.txt	/*t_SI*
 t_SR	term.txt	/*t_SR*
+t_ST	term.txt	/*t_ST*
 t_Sb	term.txt	/*t_Sb*
 t_Sf	term.txt	/*t_Sf*
+t_Si	term.txt	/*t_Si*
 t_Te	term.txt	/*t_Te*
 t_Ts	term.txt	/*t_Ts*
 t_VS	term.txt	/*t_VS*
@@ -9623,6 +9644,7 @@ windows98	os_win32.txt	/*windows98*
 windowsme	os_win32.txt	/*windowsme*
 winheight()	eval.txt	/*winheight()*
 winid	windows.txt	/*winid*
+winlayout()	eval.txt	/*winlayout()*
 winline()	eval.txt	/*winline()*
 winnr()	eval.txt	/*winnr()*
 winrestcmd()	eval.txt	/*winrestcmd()*

runtime/doc/term.txt

@@ -352,6 +352,10 @@ Added by Vim (there are no standard codes for these):
 	t_SH	set cursor shape				*t_SH* *'t_SH'*
 	t_RC	request terminal cursor blinking		*t_RC* *'t_RC'*
 	t_RS	request terminal cursor style			*t_RS* *'t_RS'*
+	t_ST	save window title to stack			*t_ST* *'t_ST'*
+	t_RT	restore window title from stack			*t_RT* *'t_RT'*
+	t_Si	save icon text to stack				*t_Si* *'t_Si'*
+	t_Ri	restore icon text from stack			*t_Ri* *'t_Ri'*
 
 Some codes have a start, middle and end part.  The start and end are defined
 by the termcap option, the middle part is text.

runtime/doc/terminal.txt

@@ -228,6 +228,10 @@ Syntax ~
 
 			If you want to use more options use the |term_start()|
 			function.
+			If you want to split the window vertically, use: >
+				:vertical terminal
+<			Or short: >
+				:vert ter
 
 When the buffer associated with the terminal is forcibly unloaded or wiped out
 the job is killed, similar to calling `job_stop(job, "kill")` .
@@ -613,7 +617,18 @@ This will open a window consisting of three parts:
 3.  The contents of the second dump
 
 You can usually see what differs in the second part.  Use the 'ruler' to
-relate it to the position in the first or second dump.
+relate it to the position in the first or second dump.  Letters indicate the
+kind of difference:
+	X	different character
+	>	cursor in first but not in second
+	<	cursor in second but not in first
+	w	character width differs (single vs double width)
+	f	foreground color differs
+	b	background color differs
+	a	attribute differs (bold, underline, reverse, etc.)
+	?	character missing in both
+	+	character missing in first
+	-	character missing in second
 
 Alternatively, press "s" to swap the first and second dump. Do this several
 times so that you can spot the difference in the context of the text.
@@ -635,7 +650,7 @@ Starting ~
 Load the plugin with this command: >
 	packadd termdebug
 <							*:Termdebug*
-To start debugging use `:Termdebug` or `:TermdebugCommand`` followed by the
+To start debugging use `:Termdebug` or `:TermdebugCommand` followed by the
 command name, for example: >
 	:Termdebug vim
 

runtime/doc/todo.txt

@@ -34,10 +34,22 @@ entered there will not be repeated below, unless there is extra information.
 
 The #1234 numbers refer to an issue or pull request on github.  To see it in a
 browser use: https://github.com/vim/vim/issues/1234
-
+(replace 1234 with the issue/pull number)
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
+tar plugin: use "file" to check compression type, use bzip2 only when it
+recognizes bzip2 or file ends in .bz2
+
+'incsearch' with :s: (#3321)
+- :s/foo  using CTRL-G moves to another line, should not happen, or use the
+  correct line (it uses the last but one line) (Lifepillar, Aug 18, #3345)
+- Also support range: :/foo/,/bar/delete
+- Also support for user command, e.g. Cfilter
+- :%s/foo should take the first match below the cursor line, unless there
+  isn't one?
+  Then :%s?foo should take the first match above the cursor line.
+
 Prompt buffer:
 - Add a command line history.
 - delay next prompt until plugin gives OK?
@@ -50,11 +62,16 @@ Terminal debugger:
   initializing mzscheme avoid the problem, thus it's not some #ifdef.
 
 Terminal emulator window:
+- GUI: When using ":set go+=!" a system() call causes the hit-enter prompt.
+  (#3327)
 - When the job in the terminal doesn't use mouse events, let the scroll wheel
   scroll the scrollback, like a terminal does at the shell prompt. #2490
   And use modeless selection.  #2962
+- Allow for specifying the directory, with ++cwd={dir}.
 - With a vertical split only one window is updated. (Linwei, 2018 Jun 2,
   #2977)
+- Add a way to make ":term cmd" run "cmd" in a shell, instead of executing it
+  directly.  Perhaps ":term ++shell cmd". (#3340)
 - When pasting should call vterm_keyboard_start_paste(), e.g. when using
   K_MIDDLEMOUSE, calling insert_reg().
 - Users expect parsing the :term argument like a shell does, also support
@@ -74,18 +91,22 @@ Terminal emulator window:
 - When 'encoding' is not utf-8, or the job is using another encoding, setup
   conversions.
 
+Not possible to have a comment in between line continuation.  Use |\":
+	let array = [
+	    \ item,
+	    |\" comment
+	    \ item,
+	    \ ]
+
 Does not build with MinGW out of the box:
 - _stat64 is not defined, need to use "struct stat" in vim.h
 - WINVER conflict, should use 0x0600 by default?
 
-Patches for Python: #3162, #3263 (Ozaki Kiichi)
-    Needs update.
-
 Crash when mixing matchadd and substitute()? (Max Christian Pohle, 2018 May
 13, #2910)  Can't reproduce?
 
-On Win32 when not in the console and t_Co >= 256, allow using 'tgc'.
-(Nobuhiro Takasaki, #2833)  Also check t_Co.
+Patch to add script line number to script ID. (ichizok, Ozaki Kiichi, 2018 Aug
+24, #3362)
 
 Errors found with random data:
     heap-buffer-overflow in alist_add (#2472)
@@ -94,33 +115,34 @@ Improve fallback for menu translations, to avoid having to create lots of
 files that source the actual file.  E.g. menu_da_de -> menu_da
 Include part of #3242?
 
-Inlcude Chinese-Taiwan translations. (bystar, #3261)
-
-Using mouse for inputlist() doesn't work after patch 8.0.1756. (Dominique
-Pelle, 2018 Jul 22, #3239)  Also see 8.0.0722.  Check both console and GUI.
+Completion mixes results from the current buffer with tags and other files.
+Happens when typing CTRL-N while still search for results.  E.g., type "b_" in
+terminal.c and then CTRL-N twice.
+Should do current file first and not split it up when more results are found.
+(Also #1890)
 
 More warnings from static analysis:
 https://lgtm.com/projects/g/vim/vim/alerts/?mode=list
 
-When handle_drop() is called while the updating_screen is true, it fails
-completely.  Should store the file list and use it when updating_screen is set
-to false in reset_updating_screen().
-
 Pasting foo} causes Vim to behave weird. (John Little, 2018 Jun 17)
 Related to bracketed paste.  I cannot reproduce it.
 
-Using ":file" in quickfix window during an autocommand doesn't work. 
-(Jason Franklin, 2018 May 23) Allow for using it when there is no argument.
-
 Patch in pull request #2967: Allow white space in sign text. (Ben Jackson)
 Test fails in AppVeyor.
 
+Job_info() returns command without backslashes. (Daniel Hahler, 2018 Sep 3,
+#3404)
+
 Removing flags from 'cpoptions' breaks the Winbar buttons in termdebug.
 (Dominique Pelle, 2018 Jul 16)
 
 Problem with two buffers with the same name a/b, if it didn't exist before and
 is created outside of Vim. (dskloetg, 2018 Jul 16, #3219)
 
+Invalid memory access with old regexp engine. (Dominique Pelle, 2018 Sep 3,
+#3405)  Introduced by 8.0.1517, which was fixing another memory access error.
+(Sep 8)
+
 Memory leak in test_assert:
 ==19127==    by 0x2640D7: alloc (misc2.c:874)
 ==19127==    by 0x2646D6: vim_strsave (misc2.c:1315)
@@ -152,11 +174,53 @@ Memory leak in test_terminal:
 
 gethostbyname() is old, use getaddrinfo() if available. (#3227)
 
+Delete the src/main.aap file?
+
 matchaddpos() gets slow with many matches.  Proposal by Rick Howe, 2018 Jul
 19.
 
-Patch to make mode() return something different for Normal mode when coming
-from Insert mode with CTRL-O. (#3000)  Useful for positioning the cursor.
+Patch to support ":tag <tagkind> <tagname>". (emmrk, 2018 May 7, #2871)
+Use something like ":tag {kind}/{tagname}".
+Not ready to include.
+
+home_replace() uses $HOME instead of "homedir". (Cesar Martins, 2018 Aug 9)
+
+Adjust windows installer explanation of behavior. (scootergrisen, #3310)
+
+Set g:actual_curbuf when evaluating 'statusline', not just with an expression.
+(Daniel Hahler, 2018 Aug 8, #3299)
+
+Using an external diff is inefficient.  Not all systems have a good diff
+program available (esp. MS-Windows).  Would be nice to have in internal diff
+implementation.  Can then also use this for displaying changes within a line.
+Olaf Dabrunz is working on this. (10 Jan 2016)
+9   Instead invoking an external diff program, use builtin code.  One can be
+    found here: http://www.ioplex.com/~miallen/libmba/dl/src/diff.c
+    It's complicated and badly documented.
+Alternative: use the xdiff library from git.  Unfinished Patch from Christian
+Brabandt, 2018 Mar 20, #2732)
+Note that this is NOT libxdiff.
+-> avoid writing all the text to a file, use in-memory only
+-> add option to use external diff above a certain size.
+-> when making changes, diff only the part of the buffer that changed.
+
+Difference between two regexp engines: #3373
+
+Patch to add arguments to argc() and argv(). (Yegappan Lakshmanan, 2016 Jan
+24, #832)  Also need a way to get the global arg list?  Update later on Jan 24
+Update Mar 5. Update Apr 7.  Update Jun 5.
+
+When the last line wraps, selecting with the mouse below that line only
+includes the first screen line. (2018 Aug 23, #3368)
+
+Refactored HTML indent file. (Michael Lee, #1821)
+
+Test for user name completeion ":e ~s<Tab>" fails because we don't get all
+user names.  Is there another function to get more? (2018 Sep 3, Stuckrad)
+
+Patch to add getregpoint() and setreg() with an option to set "".
+(Andy Massimino, 2018 Aug 24, #3370)
+Better name?
 
 Script generated by :mksession does not work well if there are windows with
 modified buffers
@@ -165,13 +229,6 @@ modified buffers
   skip "badd fname" if "fname" is already in the buffer list
   remove remark about unloading buffers from documentation
 
-Patch to make :help work for tags with a ?. (Hirohito Higashi, 2018 May 28)
-
-Patch to adjust to DPI setting for GTK. (Roel van de Kraats, 2017 Nov 20,
-#2357)
-
-Patch to fix window size when using VTP. (Nobuhiro Takasaki, #3164)
-
 Compiler warnings (geeknik, 2017 Oct 26):
 - signed integer overflow in do_sub() (#2249)
 - signed integer overflow in get_address() (#2248)
@@ -181,7 +238,11 @@ Compiler warnings (geeknik, 2017 Oct 26):
 Win32 console: <F11> and <F12> typed in Insert mode don't result in normal
 characters. (#3246)
 
-Patch for more quickfix refactoring. (Yegappan Lakshmanan, #2950)
+Height of quickfix window is not retained with vertical splits. (Lifepillar,
+2018 Aug 24, #2998)
+
+Window size is wrong when using quickfix window. (Lifepillar, 2018 Aug 24,
+#2999)
 
 Tests failing for "make testgui" with GTK:
 - Test_setbufvar_options()
@@ -192,23 +253,16 @@ is cleared, to avoid going back to the list of errors buffer (would have two
 windows with it).  Can we just remove the jump list entries for the quickfix
 buffer?
 
-Patch to stack and pop the window title and icon. (IWAMOTO Kouichi, 2018 Jun
-22, #3059)
-8   For xterm need to open a connection to the X server to get the window
-    title, which can be slow.  Can also get the title with "<Esc>[21t", no
-    need to use X11 calls.  This returns "<Esc>]l{title}<Esc>\".
-Using title stack probably works better.
-
-When a function is defined in the sandbox (with :function or as a lambda)
-always execute it in the sandbox.  (#3182)
-Remove "safe" argument from call_vim_function(), it's always FALSE.
-
 Make balloon_show() work outside of 'balloonexpr'?  Users expect it to work:
 #2948. (related to #1512?)
 On Win32 it stops showing, because showState is already ShS_SHOWING.
 balloon_show() does not work properly in the terminal. (Ben Jackson, 2017 Dec
 20, #2481)
 Also see #2352, want better control over balloon, perhaps set the position.
+Should also be possible to add highlighting, like in the status line?
+
+Patch to fix that executable() may fail on very long filename in MS-Windows.
+(Ken Takata, 2016 Feb 1)
 
 Try out background make plugin: 
   https://github.com/AndrewVos/vim-make-background
@@ -224,19 +278,20 @@ used for git temp files.
 
 Cursor in wrong position when line wraps. (#2540)
 
-Patch for Lua support. (Kazunobu Kuriyama, 2018 May 26)
+Patch to parse ":line" in tags file and use it for search. (Daniel Hahler,
+#2546)  Fixes #1057.  Missing a test.
 
 Make {skip} argument of searchpair() consistent with other places where we
 pass an expression to evaluate.  Allow passing zero for "never skip".
 
+The 'scrolloff' option is global, make it global-local. #3195
+
 Add an option similar to 'lazyredraw' to skip redrawing while executing a
 script or function.
 
 Universal solution to detect if t_RS is working, using cursor position.
 Koichi Iwamoto, #2126
 
-Patch to fix profiling condition lines. (Ozaki Kiichi,, 2017 Dec 26, #2499)
-
 When using a menu item while the "more" prompt is displayed doesn't work well.
 E.g. after using help->version.  Have a key that ends the "more" prompt and
 does nothing otherwise?
@@ -270,8 +325,8 @@ How to test that it works well for all Vim users?
 
 Alternative manpager.vim. (Enno, 2018 Jan 5, #2529)
 
-Patch to use NGETTEXT() in many more places. (Sergey Alyoshin, 2018 May 25)
-Updated ptach May 27.
+Delete all the speficic stuff for the Borland compiler? (#3374)
+Patch in #3377 (Thomas Dziedzic)
 
 Does setting 'cursorline' cause syntax highlighting to slow down?  Perhaps is
 mess up the cache?  (Mike Lee Williams, 2018 Jan 27, #2539)
@@ -306,19 +361,9 @@ confusing error message. (Wang Shidong, 2018 Jan 2, #2519)
 
 Add the debug command line history to viminfo.
 
-Issue #686: apply 'F' in 'shortmess' to more messages.  Also #3221.
-
 Avoid that "sign unplace id" does a redraw right away, esp. when there is a
 sequence of these commands. (Andy Stewart, 2018 Mar 16)
 
-ch_sendraw() with long string does not try to read in between, which may cause
-a deadlock if the reading side is waiting for the write to finish. (Nate
-Bosch, 2018 Jan 13, #2548)
-Perhaps just make chunks of 1024 bytes?
-
-Patch to include a cfilter plugin to filter quickfix/location lists.
-(Yegappan Lakshmanan, 2018 May 12)
-
 Add Makefiles to the runtime/spell directory tree, since nobody uses Aap.
 Will have to explain the manual steps (downloading the .aff and .dic files,
 applying the diff, etc.
@@ -337,8 +382,6 @@ With foldmethod=syntax and nofoldenable comment highlighting isn't removed.
 Using 'wildignore' also applies to literally entered file name.  Also with
 :drop (remote commands).
 
-Patch to support ":tag <tagkind> <tagname". (emmrk, 2018 May 7, #2871)
-
 Inserting a line in a CompleteDone autocommand may confuse undo. (micbou,
 2018 Jun 18, #3027)
 
@@ -379,36 +422,26 @@ crash when removing an element while inside map(). (Nikolai Pavlov, 2018 Feb
 When 'virtualedit' is "all" and 'cursorcolumn' is set, the wrong column may be
 highlighted. (van-de-bugger, 2018 Jan 23, #2576)
 
-Patch to parse ":line" in tags file and use it for search. (Daniel Hahler,
-#2546)  Fixes #1057.  Missing a test.
-
 ":file" does not show anything when 'shortmess' contains 'F'. (#3070)
 
-Patch to add winlayout() function. (Yegappan Lakshmanan, 2018 Jan 4)
-
 No profile information for function that executes ":quit". (Daniel Hahler,
 2017 Dec 26, #2501)
 
+A function on a dictionary is not profiled. (ZyX, 2010 Dec 25)
+
+Add script number to profile?  (#3330 breaks tests).
+
+A function defined locally and lambda's are not easily recognized.
+Mention where they were defined somewhere.
+
 Get a "No Name" buffer when 'hidden' is set and opening a new window from the
 quickfix list. (bfrg, 2018 Jan 22, #2574)
 
 CTRL-X on zero gets stuck on 0xfffffffffffffffe. (Hengyang Zhao, #2746)
 
-A function on a dictionary is not profiled. (ZyX, 2010 Dec 25)
-
 Invalid range error when using BufWinLeave for closing terminal.
 (Gabriel Barta, 2017 Nov 15, #2339)
 
-Using an external diff is inefficient.  Not all systems have a good diff
-program available (esp. MS-Windows).  Would be nice to have in internal diff
-implementation.  Can then also use this for displaying changes within a line.
-Olaf Dabrunz is working on this. (10 Jan 2016)
-9   Instead invoking an external diff program, use builtin code.  One can be
-    found here: http://www.ioplex.com/~miallen/libmba/dl/src/diff.c
-    It's complicated and badly documented.
-Alternative: use the xdiff library.  Patch from Christian Brabandt, 2018 Mar
-20, #2732)
-
 ml_get errors with buggy script. (Dominique, 2017 Apr 30)
 
 Error in emsg with buggy script. (Dominique, 2017 Apr 30)
@@ -452,9 +485,6 @@ always nested.
 
 matchit hasn't been maintained for a long time.  #955.
 
-Patch to add variable name after "scope add". (Eddie Lebow, 2018 Feb 7, #2620)
-Maybe not needed?
-
 Problem with 'delcombine'. (agguser, 2017 Nov 10, #2313)
 
 MS-Windows: buffer completion doesn't work when using backslash (or slash)
@@ -489,8 +519,6 @@ It can replace the BeOS code, which is likely not used anymore.
 Now on github: #1856.  Updated Oct 2017
 Got permission to include this under the Vim license.
 
-Refactored HTML indent file. (Michael Lee, #1821)
-
 Test_writefile_fails_conversion failure on Solaris because if different iconv
 behavior.  Skip when "uname" returns "SunOS"? (Pavel Heimlich, #1872)
 
@@ -556,12 +584,6 @@ that optiona? (Bjorn Linse, 2017 Aug 5)
 Cindent: returning a structure has more indent for the second item.
 (Sam Pagenkopf, 2017 Sep 14, #2090)
 
-Completion mixes results from the current buffer with tags and other files.
-Happens when typing CTRL-N while still search for results.  E.g., type "b_" in
-terminal.c and then CTRL-N twice.
-Should do current file first and not split it up when more results are found.
-(Also #1890)
-
 Patch from Christian Brabandt to preserve upper case marks when wiping out a
 buffer. (2013 Dec 9)
 Also fixes #2166?
@@ -575,7 +597,7 @@ Profile of a dict function is lost when the dict is deleted.  Would it be
 possible to collect this?  (Daniel Hahler, #2350)
 
 Add `:filter` support for various commands (Marcin Szamotulski, 2017 Nov 12
-#2322)  Now in #2327?
+#2322)  Patch now in #2856.
 
 When checking if a bufref is valid, also check the buffer number, to catch the
 case of :bwipe followed by :new.
@@ -760,6 +782,7 @@ receiving Vim?  Or make an exception for #, it's not useful remotely.
 vertical split. (Haldean Brown, 2017 Mar 1)
 
 Use ADDR_OTHER instead of ADDR_LINES for many more commands.
+E.g. all the location list commands use a count.
 Add tests for using number larger than number of lines in buffer.
 
 Might be useful to have isreadonly(), like we have islocked().
@@ -1107,9 +1130,6 @@ Patch to add <restore> to :windo, :bufdo, etc. (Christian Brabandt, 2015 Jan
 6, 2nd message)
 Alternative: ":keeppos" command modifier: ":keeppos windo {cmd}".
 
-Patch to fix that executable() may fail on very long filename in MS-Windows.
-(Ken Takata, 2016 Feb 1)
-
 Patch to fix display of listchars on the cursorline. (Nayuri Aohime, 2013)
 Update suggested by Yasuhiro Matsumoto, 2014 Nov 25:
 https://gist.github.com/presuku/d3d6b230b9b6dcfc0477
@@ -1171,10 +1191,6 @@ I can't recommend it though.
 Build with Python on Mac does not always use the right library.
 (Kazunobu Kuriyama, 2015 Mar 28)
 
-Patch to add arguments to argc() and argv(). (Yegappan Lakshmanan, 2016 Jan
-24)  Also need a way to get the global arg list?  Update later on Jan 24
-Update Mar 5. Update Apr 7.  Update Jun 5.
-
 To support Thai (and other languages) word boundaries, include the ICU
 library:  http://userguide.icu-project.org/boundaryanalysis
 
@@ -1279,12 +1295,6 @@ Syntax highlighting slow (hangs) in SASS file. (Niek Bosch, 2013 Aug 21)
 
 Adding "~" to 'cdpath' doesn't work for completion?  (Davido, 2013 Aug 19)
 
-Should be easy to highlight all matches with 'incsearch'.  Idea by Itchyny,
-2015 Feb 6.
-
-Wrong scrolling when using incsearch.  Patch by Christian Brabandt, 2014 Dec 4.
-Is this a good solution?
-
 Patch: Let rare word highlighting overrule good word highlighting.
 (Jakson A. Aquino, 2010 Jul 30, again 2011 Jul 2)
 
@@ -1302,8 +1312,6 @@ Remark from Roland Eggner: does it cause crashes? (2014 Dec 12)
 Updated patch by Roland Eggner, Dec 16
 Updated patch from Charles, 2016 Jul 2
 
-Patch to open folds for 'incsearch'. (Christian Brabandt, 2015 Jan 6)
-
 Patch for building a 32bit Vim with 64bit MingW compiler.
 (Michael Soyka, 2014 Oct 15)
 
@@ -1874,13 +1882,6 @@ Ruby: ":ruby print $buffer.number" returns zero.
 
 setpos() does not restore cursor position after :normal. (Tyru, 2010 Aug 11)
 
-7   The 'directory' option supports changing path separators to "%" to make
-    file names unique, also support this for 'backupdir'. (Mikolaj Machowski)
-    Patch by Christian Brabandt, 2010 Oct 21.
-    Is this an update:  related to: #179
-    https://github.com/chrisbra/vim-mq-patches/blob/master/backupdir
-    Fixed patch 2017 Jul 1.
-
 With "tw=55 fo+=a" typing space before ) doesn't work well. (Scott Mcdermott,
 2010 Oct 24)
 
@@ -1976,9 +1977,6 @@ Patch to support :undo absolute jump to file save number. (Christian Brabandt,
 Patch to use 'foldnestmax' also for "marker" foldmethod. (Arnaud Lacombe, 2011
 Jan 7)
 
-Bug with 'incsearch' going to wrong line. (Wolfram Kresse, 2009 Aug 17)
-Only with "vim -u NONE".
-
 Problem with editing file in binary mode. (Ingo Krabbe, 2009 Oct 8)
 
 With 'wildmode' set to "longest:full,full" and pressing Tab once the first
@@ -3454,8 +3452,6 @@ Macintosh:
     'magic' in history.  (Margo)
 9   optwin.vim: Restoring a mapping for <Space> or <CR> is not correct for
     ":noremap".  Add "mapcmd({string}, {mode})?  Use code from ":mkexrc".
-9   incsearch is incorrect for "/that/<Return>/this/;//" (last search pattern
-    isn't updated).
 9   term_console is used before it is set (msdos, Amiga).
 9   Get out-of-memory for ":g/^/,$s//@/" on 1000 lines, this is not handled
     correctly.  Get many error messages while redrawing the screen, which
@@ -5231,16 +5227,22 @@ Mappings and Abbreviations:
 
 
 Incsearch:
--   Add a limit to the number of lines that are searched for 'incsearch'?
+-   Wrong scrolling when using incsearch.  Patch by Christian Brabandt, 2014
+    Dec 4.  Is this a good solution?
+-   Temporarily open folds to show where the search ends up.  Restore the
+    folds when going to another line.
+    Patch to open folds for 'incsearch'. (Christian Brabandt, 2015 Jan 6)
+-   Bug with 'incsearch' going to wrong line. (Wolfram Kresse, 2009 Aug 17)
+    Only with "vim -u NONE".
 -   When no match is found and the user types more, the screen is redrawn
     anyway.  Could skip that.  Esp. if the line wraps and the text is scrolled
     up every time.
--   Temporarily open folds to show where the search ends up.  Restore the
-    folds when going to another line.
 -   When incsearch used and hitting return, no need to search again in many
     cases, saves a lot of time in big files. (Slootman wants to work on this?)
     When not using special characters, can continue search from the last match
     (or not at all, when there was no match).  See oldmail/webb/in.872.
+9   incsearch is incorrect for "/that/<Return>/this/;//" (last search pattern
+    isn't updated).
 
 
 Searching:
@@ -6154,5 +6156,5 @@ Far future and "big" extensions:
     are reflected in each Vim immediately.  Could work with local files but
     also over the internet.  See http://www.codingmonkeys.de/subethaedit/.
 
-vim:tw=78:sw=4:sts=4:ts=8:ft=help:norl:
+vim:tw=78:sw=4:sts=4:ts=8:noet:ft=help:norl:
 vim: set fo+=n :

runtime/doc/uganda.txt

@@ -285,4 +285,4 @@ Address to send checks to:
 
 This address is expected to be valid for a long time.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/undo.txt

@@ -403,4 +403,4 @@ if it is not what you want do 'u.'.  This will remove the contents of the
 first put, and repeat the put command for the second register.  Repeat the
 'u.' until you got what you want.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_01.txt

@@ -189,4 +189,4 @@ donate part of the profit to help AIDS victims in Uganda.  See |iccf|.
 
 Next chapter: |usr_02.txt|  The first steps in Vim
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_02.txt

@@ -698,4 +698,4 @@ Summary: 					*help-summary*  >
 
 Next chapter: |usr_03.txt|  Moving around
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_03.txt

@@ -654,4 +654,4 @@ You will notice a few special marks.  These include:
 
 Next chapter: |usr_04.txt|  Making small changes
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_04.txt

@@ -511,4 +511,4 @@ else:
 
 Next chapter: |usr_05.txt|  Set your settings
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_05.txt

@@ -664,4 +664,4 @@ This does mean there is less room to edit text, thus it's a compromise.
 
 Next chapter: |usr_06.txt|  Using syntax highlighting
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_06.txt

@@ -277,4 +277,4 @@ others look at the colored text.
 
 Next chapter: |usr_07.txt|  Editing more than one file
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_07.txt

@@ -476,4 +476,4 @@ This protects you from accidentally overwriting another file.
 
 Next chapter: |usr_08.txt|  Splitting windows
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_08.txt

@@ -598,4 +598,4 @@ For more information about tab pages see |tab-page|.
 
 Next chapter: |usr_09.txt|  Using the GUI
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_09.txt

@@ -287,4 +287,4 @@ You can tune the way Select mode works with the 'selectmode' option.
 
 Next chapter: |usr_10.txt|  Making big changes
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_10.txt

@@ -821,4 +821,4 @@ has written.  To tell Vim to redraw the screen: >
 
 Next chapter: |usr_11.txt|  Recovering from a crash
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_11.txt

@@ -284,6 +284,7 @@ If you really don't want to see this message, you can add the 'A' flag to the
 'shortmess' option.  But it's very unusual that you need this.
 
 For remarks about encryption and the swap file, see |:recover-crypt|.
+For programatic access to the swap file, see |swapinfo()|.
 
 ==============================================================================
 *11.4*	Further reading
@@ -304,4 +305,4 @@ For remarks about encryption and the swap file, see |:recover-crypt|.
 
 Next chapter: |usr_12.txt|  Clever tricks
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_12.txt

@@ -355,4 +355,4 @@ matches and where they are.
 
 Next chapter: |usr_20.txt|  Typing command-line commands quickly
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_20.txt

@@ -381,4 +381,4 @@ there can be only one.
 
 Next chapter: |usr_21.txt|  Go away and come back
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_21.txt

@@ -496,4 +496,4 @@ For more details see |modeline|.
 
 Next chapter: |usr_22.txt|  Finding the file to edit
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_22.txt

@@ -397,4 +397,4 @@ can't be editing nothing!
 
 Next chapter: |usr_23.txt|  Editing other files
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_23.txt

@@ -340,4 +340,4 @@ decompression.  You might need to install the programs first.
 
 Next chapter: |usr_24.txt|  Inserting quickly
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_24.txt

@@ -603,4 +603,4 @@ This deletes up to the third word into register g.
 
 Next chapter: |usr_25.txt|  Editing formatted text
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_25.txt

@@ -579,4 +579,4 @@ The "gR" command uses Virtual Replace mode.  This preserves the layout:
 
 Next chapter: |usr_26.txt|  Repeating
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_26.txt

@@ -218,4 +218,4 @@ start all over, use the "-W" argument.  It overwrites any existing file.
 
 Next chapter: |usr_27.txt|  Search commands and patterns
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_27.txt

@@ -560,4 +560,4 @@ and "\w" for "[0-9A-Za-z_]".
 
 Next chapter: |usr_28.txt|  Folding
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_28.txt

@@ -423,4 +423,4 @@ the defined folds.  Then you can delete or add folds manually.
 
 Next chapter: |usr_29.txt|  Moving through programs
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_29.txt

@@ -608,4 +608,4 @@ for the identifier.  Example (cursor on "idx"):
 
 Next chapter: |usr_30.txt|  Editing programs
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_30.txt

@@ -640,4 +640,4 @@ For more details see |format-comments|.
 
 Next chapter: |usr_31.txt|  Exploiting the GUI
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_31.txt

@@ -269,4 +269,4 @@ another font size, for example.
 
 Next chapter: |usr_32.txt|  The undo tree
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_32.txt

@@ -177,4 +177,4 @@ use the |undotree()| function.  To see what it returns: >
 
 Next chapter: |usr_40.txt|  Make new commands
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_40.txt

@@ -654,4 +654,4 @@ To set it back to the normal behavior, make 'eventignore' empty: >
 
 Next chapter: |usr_41.txt|  Write a Vim script
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_41.txt

@@ -809,6 +809,7 @@ Buffers, windows and the argument list:
 	getwininfo()		get a list with window information
 	getchangelist()		get a list of change list entries
 	getjumplist()		get a list of jump list entries
+	swapinfo()		information about a swap file
 
 Command line:					*command-line-functions*
 	getcmdline()		get the current command line
@@ -2592,4 +2593,4 @@ It's good if you add a line to allow automatic updating.  See |glvs-plugins|.
 
 Next chapter: |usr_42.txt|  Add new menus
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_42.txt

@@ -362,4 +362,4 @@ is...
 
 Next chapter: |usr_43.txt|  Using filetypes
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_43.txt

@@ -176,4 +176,4 @@ and sources a script or executes a function to check the contents of the file.
 
 Next chapter: |usr_44.txt|  Your own syntax highlighted
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_44.txt

@@ -716,4 +716,4 @@ up scrolling backwards and CTRL-L.
 
 Next chapter: |usr_45.txt|  Select your language
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_45.txt

@@ -416,4 +416,4 @@ Don't type the spaces.  See |i_CTRL-V_digit| for the details.
 
 Next chapter: |usr_90.txt|  Installing Vim
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_90.txt

@@ -495,4 +495,4 @@ files that you created.  You might want to keep that.
 
 Table of contents: |usr_toc.txt|
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/usr_toc.txt

@@ -352,4 +352,4 @@ Before you can use Vim.
 
 ==============================================================================
 
-Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/various.txt

@@ -729,4 +729,4 @@ LessInitFunc in your vimrc, for example: >
 	endfunc
 <
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/version4.txt

@@ -352,4 +352,4 @@ this and accidentally hit CTRL-B, it is very difficult to find out how to undo
 it.  Since hardly anybody uses this feature, it is disabled by default.  If
 you want to use it, define RIGHTLEFT in feature.h before compiling. |'revins'|
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/version5.txt

@@ -7810,4 +7810,4 @@ Solution:   Allocate the buffer for the shell command.
 Files:	    src/ex_docmd.c
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/version6.txt

@@ -14527,4 +14527,4 @@ Solution:   Don't advance the cursor to include a line break when it's already
 Files:	    src/search.c
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/version7.txt

@@ -18309,4 +18309,4 @@ Files:	    src/os_win32.c
 
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/version8.txt

@@ -25792,4 +25792,4 @@ Solution:   Move the todo items to the help file.
 Files:      src/terminal.c
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/vi_diff.txt

@@ -1021,4 +1021,4 @@ These are remarks about running the POSIX test suite:
 - ex test 534 fails because .exrc isn't read in silent mode.
 
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/visual.txt

@@ -538,4 +538,4 @@ g CTRL-H		Start Select mode, blockwise.  This is like CTRL-V,
 			but starts Select mode instead of Visual mode.
 			Mnemonic: "get Highlighted".
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/windows.txt

@@ -1311,4 +1311,4 @@ unlisted	The buffer is not in the buffer list.  It is not used for
 			:setlocal nobuflisted
 <
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/workshop.txt

@@ -95,4 +95,4 @@ the directory /usr/local/xpm and untar the file there you can use the
 uncommented lines in the Makefile without changing them.  If you use another
 xpm directory you will need to change the XPM_DIR in src/Makefile.
 
- vim:tw=78:ts=8:ft=help:norl:
+ vim:tw=78:ts=8:noet:ft=help:norl:

runtime/filetype.vim

@@ -586,7 +586,7 @@ au BufNewFile,BufRead auto.master		setf conf
 au BufNewFile,BufRead *.mas,*.master		setf master
 
 " Forth
-au BufNewFile,BufRead *.fs,*.ft			setf forth
+au BufNewFile,BufRead *.fs,*.ft,*.fth		setf forth
 
 " Reva Forth
 au BufNewFile,BufRead *.frt			setf reva
@@ -1766,6 +1766,9 @@ au BufNewFile,BufRead *.vroom			setf vroom
 " Webmacro
 au BufNewFile,BufRead *.wm			setf webmacro
 
+" WebAssembly
+au BufNewFile,BufRead *.wast,*.wat		setf wast
+
 " Wget config
 au BufNewFile,BufRead .wgetrc,wgetrc		setf wget
 
@@ -1862,6 +1865,9 @@ au BufNewFile,BufRead */etc/xdg/menus/*.menu	setf xml
 " ATI graphics driver configuration
 au BufNewFile,BufRead fglrxrc			setf xml
 
+" Web Services Description Language (WSDL)
+au BufNewFile,BufRead *.wsdl			setf xml
+
 " XLIFF (XML Localisation Interchange File Format) is also XML
 au BufNewFile,BufRead *.xlf			setf xml
 au BufNewFile,BufRead *.xliff			setf xml

runtime/ftplugin/cmake.vim

@@ -1,16 +1,34 @@
 " Vim filetype plugin
 " Language:    CMake
 " Maintainer:  Keith Smiley <keithbsmiley@gmail.com>
-" Last Change: 2017 Dec 24
+" Last Change: 2018 Aug 30
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
   finish
 endif
 
+" save 'cpo' for restoration at the end of this file
+let s:cpo_save = &cpo
+set cpo&vim
+
 " Don't load another plugin for this buffer
 let b:did_ftplugin = 1
 
 let b:undo_ftplugin = "setl commentstring<"
 
+if exists('loaded_matchit')
+  let b:match_words = '\<if\>:\<elseif\>\|\<else\>:\<endif\>'
+        \ . ',\<foreach\>\|\<while\>:\<break\>:\<endforeach\>\|\<endwhile\>'
+        \ . ',\<macro\>:\<endmacro\>'
+        \ . ',\<function\>:\<endfunction\>'
+  let b:match_ignorecase = 1
+
+  let b:undo_ftplugin .= "| unlet b:match_words"
+endif
+
 setlocal commentstring=#\ %s
+
+" restore 'cpo' and clean up buffer variable
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/ftplugin/haskell.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:             Haskell
+" Maintainer:           Daniel Campoverde <alx@sillybytes.net>
 " Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2008-07-09
+" Latest Revision:      2018-08-27
 
 if exists("b:did_ftplugin")
   finish
@@ -15,6 +16,7 @@ let b:undo_ftplugin = "setl com< cms< fo<"
 
 setlocal comments=s1fl:{-,mb:-,ex:-},:-- commentstring=--\ %s
 setlocal formatoptions-=t formatoptions+=croql
+setlocal omnifunc=haskellcomplete#Complete
 
 let &cpo = s:cpo_save
 unlet s:cpo_save

runtime/ftplugin/logtalk.dict

@@ -1,164 +1,262 @@
-encoding
+abolish
+abolish_category
+abolish_events
+abolish_object
+abolish_protocol
+abs
+acos
+acyclic_term
+after
+alias
+always_true_or_false_goals
+arg
+asin
+asserta
+assertz
+atan
+atan2
+atom
+atomic
+atom_chars
+atom_chars
+atom_codes
+atom_codes
+atom_concat
+atom_concat
+atom_length
+at_end_of_stream
+bagof
+before
+built_in
+call
+callable
 calls
+catch
 category
+category_property
+ceiling
+char_code
+char_conversion
+clause
+clean
+close
+code_prefix
+coinduction
+coinductive
+compare
+complements
+complements
+complements_object
+compound
+conforms_to_protocol
+context
+context_switching_calls
+copy_term
+cos
+create_category
+create_logtalk_flag
+create_object
+create_protocol
+current_category
+current_char_conversion
+current_event
+current_input
+current_logtalk_flag
+current_object
+current_op
+current_output
+current_predicate
+current_prolog_flag
+current_protocol
+debug
+define_events
+deprecated
+discontiguous
+div
+domain_error
+duplicated_directives
 dynamic
+dynamic_declarations
+elif
+else
+encoding
+encoding_directive
+endif
 end_category
 end_object
 end_protocol
-info
-initialization
-object
-protocol
-synchronized
-threaded
-uses
-alias
-discontiguous
-meta_predicate
-mode
-op
-private
-protected
-public
-current_object
-current_protocol
-current_category
-object_property
-protocol_property
-category_property
-create_object
-create_protocol
-create_category
-abolish_object
-abolish_protocol
-abolish_category
-complements
-complements_object
+engines
+ensure_loaded
+evaluation_error
+events
+existence_error
+exp
+expand_goal
+expand_term
+export
 extends
+extends_category
 extends_object
 extends_protocol
-extends_category
+fail
+false
+findall
+float
+float_fractional_part
+float_integer_part
+floor
+flush_output
+forall
+forward
+functor
+get_byte
+get_char
+get_code
+goal_expansion
+ground
+halt
+hook
+if
+ignore
 implements
 implements_protocol
 imports
 imports_category
+include
+info
+initialization
 instantiates
 instantiates_class
-specializes
-specializes_class
-abolish_events
-current_event
-define_events
-logtalk_load
+instantiation_error
+integer
+keysort
+lambda_variables
+log
 logtalk_compile
 logtalk_library_path
-current_logtalk_flag
-set_logtalk_flag
-threaded_call
-threaded_once
-threaded_ignore
-threaded_exit
-threaded_peek
-threaded_wait
-threaded_notify
-self
-this
-sender
-parameter
-before
-after
-phrase
-expand_term
-goal_expansion
-term_expansion
-true
-fail
-call
-catch
-throw
-unify_with_occurs_check
-var
-atom
-integer
-float
-atomic
-compound
+logtalk_load
+logtalk_load_context
+logtalk_make
+logtalk_make_target_action
+max
+meta_non_terminal
+meta_predicate
+min
+missing_directives
+mod
+mode
+modules
+multifile
+nl
 nonvar
 number
-arg
-copy_term
-functor
-current_predicate
-predicate_property
-abolish
-assertz
-asserta
-clause
-retract
-retractall
-bagof
-findall
-forall
-setof
-current_input
-current_output
-set_input
-set_output
+numbervars
+number_chars
+number_chars
+number_codes
+number_codes
+object
+object_property
+once
+op
 open
-close
-flush_output
-stream_property
-at_end_of_stream
-set_stream_position
-get_char
-get_code
+optimize
+parameter
+peek_byte
 peek_char
 peek_code
+permission_error
+phrase
+portability
+predicate_property
+private
+prolog_compatible_version
+prolog_compiler
+prolog_dialect
+prolog_loader
+prolog_version
+protected
+protocol
+protocol_property
+public
+put_byte
 put_char
 put_code
-nl
-get_byte
-peek_byte
-put_byte
 read
 read_term
+redefined_built_ins
+reexport
+reload
+rem
+repeat
+report
+representation_error
+resource_error
+retract
+retractall
+round
+scratch_directory
+self
+sender
+setof
+set_input
+set_logtalk_flag
+set_output
+set_prolog_flag
+set_stream_position
+sign
+sin
+singleton_variables
+sort
+source_data
+specializes
+specializes_class
+sqrt
+stream_property
+subsumes_term
+sub_atom
+suspicious_calls
+synchronized
+syntax_error
+system_error
+tabling
+tan
+term_expansion
+term_variables
+this
+threaded
+threaded_call
+threaded_engine
+threaded_engine_create
+threaded_engine_destroy
+threaded_engine_fetch
+threaded_engine_next
+threaded_engine_next_reified
+threaded_engine_post
+threaded_engine_self
+threaded_engine_yield
+threaded_exit
+threaded_ignore
+threaded_notify
+threaded_once
+threaded_peek
+threaded_wait
+threads
+throw
+trivial_goal_fails
+true
+truncate
+type_error
+undefined_predicates
+underscore_variables
+unify_with_occurs_check
+unknown_entities
+unknown_predicates
+uses
+use_module
+var
+version
 write
 writeq
 write_canonical
-atom_chars
-atom_codes
-atom_concat
-number_chars
-number_codes
-current_op
-char_conversion
-current_char_conversion
-once
-repeat
-atom_length
-atom_concat
-sub_atom
-atom_chars
-atom_codes
-char_code
-number_chars
-number_codes
-set_prolog_flag
-current_prolog_flag
-halt
-abs
-atan
-ceiling
-cos
-exp
-float_fractional_part
-float_integer_part
-floor
-log
-mod
-rem
-round
-sign
-sin
-sqrt
-truncate
+xor

runtime/ftplugin/logtalk.vim

@@ -1,7 +1,7 @@
 " Logtalk filetype plugin file
 " Language:         Logtalk
 " Maintainer:       Paulo Moura <pmoura@logtalk.org>
-" Latest Revision:  2007-07-06
+" Latest Revision:  2018-08-03
 
 if exists("b:did_ftplugin")
   finish
@@ -10,9 +10,10 @@ let b:did_ftplugin = 1
 
 let b:undo_ftplugin = "setl ts< sw< fdm< fdc< ai< dict<"
 
-"setlocal ts=4
+setlocal ts=4
 setlocal sw=4
 setlocal fdm=syntax
+setlocal fdn=10
 setlocal fdc=2
 setlocal autoindent
 setlocal dict=$VIMRUNTIME/ftplugin/logtalk.dict

runtime/ftplugin/rmd.vim

@@ -2,7 +2,7 @@
 " Language: R Markdown file
 " Maintainer: Jakson Alves de Aquino <jalvesaq@gmail.com>
 " Homepage: https://github.com/jalvesaq/R-Vim-runtime
-" Last Change:	Mon Jun 06, 2016  09:41PM
+" Last Change:	Sun Jul 22, 2018  06:51PM
 " Original work by Alex Zvoleff (adjusted from R help for rmd by Michel Kuhlmann)
 
 " Only do this when not yet done for this buffer
@@ -10,19 +10,12 @@ if exists("b:did_ftplugin")
   finish
 endif
 
-runtime! ftplugin/html.vim ftplugin/html_*.vim ftplugin/html/*.vim
-
-" Nvim-R plugin needs this
-if exists("*CompleteR")
-  if &omnifunc == "CompleteR"
-    let b:rplugin_nonr_omnifunc = ""
-  else
-    let b:rplugin_nonr_omnifunc = &omnifunc
-  endif
-  set omnifunc=CompleteR
+if exists('g:rmd_include_html') && g:rmd_include_html
+  runtime! ftplugin/html.vim ftplugin/html_*.vim ftplugin/html/*.vim
 endif
 
-setlocal comments=fb:*,fb:-,fb:+,n:> commentstring=>\ %s
+setlocal comments=fb:*,fb:-,fb:+,n:>
+setlocal commentstring=#\ %s
 setlocal formatoptions+=tcqln
 setlocal formatlistpat=^\\s*\\d\\+\\.\\s\\+\\\|^\\s*[-*+]\\s\\+
 setlocal iskeyword=@,48-57,_,.
@@ -30,6 +23,22 @@ setlocal iskeyword=@,48-57,_,.
 let s:cpo_save = &cpo
 set cpo&vim
 
+function! FormatRmd()
+  if search("^[ \t]*```[ ]*{r", "bncW") > search("^[ \t]*```$", "bncW")
+    setlocal comments=:#',:###,:##,:#
+  else
+    setlocal comments=fb:*,fb:-,fb:+,n:>
+  endif
+  return 1
+endfunction
+
+" If you do not want 'comments' dynamically defined, put in your vimrc:
+" let g:rmd_dynamic_comments = 0
+if !exists("g:rmd_dynamic_comments") || (exists("g:rmd_dynamic_comments") && g:rmd_dynamic_comments == 1)
+  setlocal formatexpr=FormatRmd()
+endif
+
+
 " Enables pandoc if it is installed
 unlet! b:did_ftplugin
 runtime ftplugin/pandoc.vim

runtime/ftplugin/rrst.vim

@@ -2,7 +2,7 @@
 " Language: reStructuredText documentation format with R code
 " Maintainer: Jakson Alves de Aquino <jalvesaq@gmail.com>
 " Homepage: https://github.com/jalvesaq/R-Vim-runtime
-" Last Change:	Tue Apr 07, 2015  04:38PM
+" Last Change:	Wed Nov 01, 2017  10:47PM
 " Original work by Alex Zvoleff
 
 " Only do this when not yet done for this buffer
@@ -16,11 +16,27 @@ let b:did_ftplugin = 1
 let s:cpo_save = &cpo
 set cpo&vim
 
-setlocal comments=fb:*,fb:-,fb:+,n:> commentstring=>\ %s
+setlocal comments=fb:*,fb:-,fb:+,n:>
+setlocal commentstring=#\ %s
 setlocal formatoptions+=tcqln
 setlocal formatlistpat=^\\s*\\d\\+\\.\\s\\+\\\|^\\s*[-*+]\\s\\+
 setlocal iskeyword=@,48-57,_,.
 
+function! FormatRrst()
+  if search('^\.\. {r', "bncW") > search('^\.\. \.\.$', "bncW")
+    setlocal comments=:#',:###,:##,:#
+  else
+    setlocal comments=fb:*,fb:-,fb:+,n:>
+  endif
+  return 1
+endfunction
+
+" If you do not want 'comments' dynamically defined, put in your vimrc:
+" let g:rrst_dynamic_comments = 0
+if !exists("g:rrst_dynamic_comments") || (exists("g:rrst_dynamic_comments") && g:rrst_dynamic_comments == 1)
+  setlocal formatexpr=FormatRrst()
+endif
+
 if has("gui_win32") && !exists("b:browsefilter")
   let b:browsefilter = "R Source Files (*.R *.Rnw *.Rd *.Rmd *.Rrst)\t*.R;*.Rnw;*.Rd;*.Rmd;*.Rrst\n" .
         \ "All Files (*.*)\t*.*\n"

runtime/ftplugin/vim.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin
 " Language:	Vim
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Dec 05
+" Last Change:	2018 Aug 07
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -17,19 +17,19 @@ set cpo-=C
 if !exists('*VimFtpluginUndo')
   func VimFtpluginUndo()
     setl fo< isk< com< tw< commentstring<
-    if exists(b:did_add_maps)
-      silent! nunmap <buffer> [['
-      silent! vunmap <buffer> [['
-      silent! nunmap <buffer> ]]'
-      silent! vunmap <buffer> ]]'
-      silent! nunmap <buffer> []'
-      silent! vunmap <buffer> []'
-      silent! nunmap <buffer> ]['
-      silent! vunmap <buffer> ]['
-      silent! nunmap <buffer> ]"'
-      silent! vunmap <buffer> ]"'
-      silent! nunmap <buffer> ["'
-      silent! vunmap <buffer> ["'
+    if exists('b:did_add_maps')
+      silent! nunmap <buffer> [[
+      silent! vunmap <buffer> [[
+      silent! nunmap <buffer> ]]
+      silent! vunmap <buffer> ]]
+      silent! nunmap <buffer> []
+      silent! vunmap <buffer> []
+      silent! nunmap <buffer> ][
+      silent! vunmap <buffer> ][
+      silent! nunmap <buffer> ]"
+      silent! vunmap <buffer> ]"
+      silent! nunmap <buffer> ["
+      silent! vunmap <buffer> ["
     endif
     unlet! b:match_ignorecase b:match_words b:match_skip b:did_add_maps
   endfunc
@@ -67,10 +67,10 @@ if !exists("no_plugin_maps") && !exists("no_vim_maps")
   vnoremap <silent><buffer> [[ m':<C-U>exe "normal! gv"<Bar>call search('^\s*fu\%[nction]\>', "bW")<CR>
   nnoremap <silent><buffer> ]] m':call search('^\s*fu\%[nction]\>', "W")<CR>
   vnoremap <silent><buffer> ]] m':<C-U>exe "normal! gv"<Bar>call search('^\s*fu\%[nction]\>', "W")<CR>
-  nnoremap <silent><buffer> [] m':call search('^\s*endf*\%[unction]\>', "bW")<CR>
-  vnoremap <silent><buffer> [] m':<C-U>exe "normal! gv"<Bar>call search('^\s*endf*\%[unction]\>', "bW")<CR>
-  nnoremap <silent><buffer> ][ m':call search('^\s*endf*\%[unction]\>', "W")<CR>
-  vnoremap <silent><buffer> ][ m':<C-U>exe "normal! gv"<Bar>call search('^\s*endf*\%[unction]\>', "W")<CR>
+  nnoremap <silent><buffer> [] m':call search('^\s*endf\%[unction]\>', "bW")<CR>
+  vnoremap <silent><buffer> [] m':<C-U>exe "normal! gv"<Bar>call search('^\s*endf\%[unction]\>', "bW")<CR>
+  nnoremap <silent><buffer> ][ m':call search('^\s*endf\%[unction]\>', "W")<CR>
+  vnoremap <silent><buffer> ][ m':<C-U>exe "normal! gv"<Bar>call search('^\s*endf\%[unction]\>', "W")<CR>
 
   " Move around comments
   nnoremap <silent><buffer> ]" :call search('^\(\s*".*\n\)\@<!\(\s*"\)', "W")<CR>
@@ -87,8 +87,7 @@ if exists("loaded_matchit")
  	\ '\<\(wh\%[ile]\|for\)\>:\<brea\%[k]\>:\<con\%[tinue]\>:\<end\(w\%[hile]\|fo\%[r]\)\>,' .
 	\ '\<if\>:\<el\%[seif]\>:\<en\%[dif]\>,' .
 	\ '\<try\>:\<cat\%[ch]\>:\<fina\%[lly]\>:\<endt\%[ry]\>,' .
-	\ '\<aug\%[roup]\s\+\%(END\>\)\@!\S:\<aug\%[roup]\s\+END\>,' .
-	\ '(:)'
+	\ '\<aug\%[roup]\s\+\%(END\>\)\@!\S:\<aug\%[roup]\s\+END\>,'
   " Ignore syntax region commands and settings, any 'en*' would clobber
   " if-endif.
   " - set spl=de,en

runtime/ftplugin/wast.vim

@@ -0,0 +1,17 @@
+" Vim filetype plugin file
+" Language:     WebAssembly
+" Maintainer:   rhysd <lin90162@yahoo.co.jp>
+" Last Change:  Jul 29, 2018
+" For bugs, patches and license go to https://github.com/rhysd/vim-wasm
+
+if exists("b:did_ftplugin")
+    finish
+endif
+let b:did_ftplugin = 1
+
+setlocal comments=s:(;,e:;),:;;
+setlocal commentstring=(;%s;)
+setlocal formatoptions-=t
+setlocal iskeyword+=$,.,/
+
+let b:undo_ftplugin = "setlocal comments< commentstring< formatoptions< iskeyword<"

runtime/indent/dosbatch.vim

@@ -0,0 +1,59 @@
+" Vim indent file
+" Language:	MSDOS batch file (with NT command extensions)
+" Maintainer:	Ken Takata
+" URL:		https://github.com/k-takata/vim-dosbatch-indent
+" Last Change:	2017 May 10
+" Filenames:	*.bat
+" License:	VIM License
+
+if exists("b:did_indent")
+  finish
+endif
+let b:did_indent = 1
+
+setlocal nosmartindent
+setlocal noautoindent
+setlocal indentexpr=GetDosBatchIndent(v:lnum)
+setlocal indentkeys=!^F,o,O
+setlocal indentkeys+=0=)
+
+if exists("*GetDosBatchIndent")
+  finish
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+function! GetDosBatchIndent(lnum)
+  let l:prevlnum = prevnonblank(a:lnum-1)
+  if l:prevlnum == 0
+    " top of file
+    return 0
+  endif
+
+  " grab the previous and current line, stripping comments.
+  let l:prevl = substitute(getline(l:prevlnum), '\c^\s*\%(@\s*\)\?rem\>.*$', '', '')
+  let l:thisl = getline(a:lnum)
+  let l:previ = indent(l:prevlnum)
+
+  let l:ind = l:previ
+
+  if l:prevl =~? '^\s*@\=if\>.*(\s*$' ||
+        \ l:prevl =~? '\<do\>\s*(\s*$' ||
+        \ l:prevl =~? '\<else\>\s*\%(if\>.*\)\?(\s*$' ||
+        \ l:prevl =~? '^.*\(&&\|||\)\s*(\s*$'
+    " previous line opened a block
+    let l:ind += shiftwidth()
+  endif
+  if l:thisl =~ '^\s*)'
+    " this line closed a block
+    let l:ind -= shiftwidth()
+  endif
+
+  return l:ind
+endfunction
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim: ts=8 sw=2 sts=2

runtime/indent/dtd.vim

@@ -3,9 +3,6 @@
 " Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
 " Latest Revision:      2011-07-08
 
-let s:cpo_save = &cpo
-set cpo&vim
-
 setlocal indentexpr=GetDTDIndent()
 setlocal indentkeys=!^F,o,O,>
 setlocal nosmartindent
@@ -14,6 +11,9 @@ if exists("*GetDTDIndent")
   finish
 endif
 
+let s:cpo_save = &cpo
+set cpo&vim
+
 " TODO: Needs to be adjusted to stop at [, <, and ].
 let s:token_pattern = '^[^[:space:]]\+'
 

runtime/indent/html.vim

@@ -663,7 +663,7 @@ func! s:CSSIndent()
     else
       let cur_hasfield = curtext =~ '^\s*[a-zA-Z0-9-]\+:'
       let prev_unfinished = s:CssUnfinished(prev_text)
-      if !cur_hasfield && (prev_hasfield || prev_unfinished)
+      if prev_unfinished
         " Continuation line has extra indent if the previous line was not a
         " continuation line.
         let extra = shiftwidth()
@@ -716,9 +716,13 @@ func! s:CSSIndent()
 endfunc "}}}
 
 " Inside <style>: Whether a line is unfinished.
+" 	tag:
+" 	tag: blah
+" 	tag: blah &&
+" 	tag: blah ||
 func! s:CssUnfinished(text)
   "{{{
-  return a:text =~ '\s\(||\|&&\|:\)\s*$'
+  return a:text =~ '\(||\|&&\|:\|\k\)\s*$'
 endfunc "}}}
 
 " Search back for the first unfinished line above "lnum".

runtime/indent/logtalk.vim

@@ -1,5 +1,5 @@
 "  Maintainer:	Paulo Moura <pmoura@logtalk.org>
-"  Revised on:	2008.06.02
+"  Revised on:	2018.08.04
 "  Language:	Logtalk
 
 " This Logtalk indent file is a modified version of the Prolog
@@ -42,6 +42,9 @@ function! GetLogtalkIndent()
 	" Check for clause head on previous line
 	elseif pline =~ ':-\s*\(%.*\)\?$'
 		let ind = ind + shiftwidth()
+	" Check for grammar rule head on previous line
+	elseif pline =~ '-->\s*\(%.*\)\?$'
+		let ind = ind + shiftwidth()
 	" Check for entity closing directive on previous line
 	elseif pline =~ '^\s*:-\send_\(object\|protocol\|category\)\.\(%.*\)\?$'
 		let ind = ind - shiftwidth()

runtime/indent/r.vim

@@ -2,7 +2,7 @@
 " Language:	R
 " Author:	Jakson Alves de Aquino <jalvesaq@gmail.com>
 " Homepage:     https://github.com/jalvesaq/R-Vim-runtime
-" Last Change:	Thu Feb 18, 2016  06:32AM
+" Last Change:	Sun Aug 19, 2018  09:13PM
 
 
 " Only load this indent file when no other was loaded.
@@ -19,22 +19,16 @@ if exists("*GetRIndent")
   finish
 endif
 
+let s:cpo_save = &cpo
+set cpo&vim
+
 " Options to make the indentation more similar to Emacs/ESS:
-if !exists("g:r_indent_align_args")
-  let g:r_indent_align_args = 1
-endif
-if !exists("g:r_indent_ess_comments")
-  let g:r_indent_ess_comments = 0
-endif
-if !exists("g:r_indent_comment_column")
-  let g:r_indent_comment_column = 40
-endif
-if ! exists("g:r_indent_ess_compatible")
-  let g:r_indent_ess_compatible = 0
-endif
-if ! exists("g:r_indent_op_pattern")
-  let g:r_indent_op_pattern = '\(&\||\|+\|-\|\*\|/\|=\|\~\|%\|->\)\s*$'
-endif
+let g:r_indent_align_args     = get(g:, 'r_indent_align_args',      1)
+let g:r_indent_ess_comments   = get(g:, 'r_indent_ess_comments',    0)
+let g:r_indent_comment_column = get(g:, 'r_indent_comment_column', 40)
+let g:r_indent_ess_compatible = get(g:, 'r_indent_ess_compatible',  0)
+let g:r_indent_op_pattern     = get(g:, 'r_indent_op_pattern',
+      \ '\(&\||\|+\|-\|\*\|/\|=\|\~\|%\|->\)\s*$')
 
 function s:RDelete_quotes(line)
   let i = 0
@@ -231,7 +225,7 @@ function GetRIndent()
 
   let cline = SanitizeRLine(cline)
 
-  if cline =~ '^\s*}' || cline =~ '^\s*}\s*)$'
+  if cline =~ '^\s*}'
     let indline = s:Get_matching_brace(clnum, '{', '}', 1)
     if indline > 0 && indline != clnum
       let iline = SanitizeRLine(getline(indline))
@@ -244,6 +238,11 @@ function GetRIndent()
     endif
   endif
 
+  if cline =~ '^\s*)$'
+    let indline = s:Get_matching_brace(clnum, '(', ')', 1)
+    return indent(indline)
+  endif
+
   " Find the first non blank line above the current line
   let lnum = s:Get_prev_line(clnum)
   " Hit the start of the file, use zero indent.
@@ -515,7 +514,9 @@ function GetRIndent()
   endwhile
 
   return ind
-
 endfunction
 
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
 " vim: sw=2

runtime/indent/rmd.vim

@@ -2,7 +2,7 @@
 " Language:	Rmd
 " Author:	Jakson Alves de Aquino <jalvesaq@gmail.com>
 " Homepage:     https://github.com/jalvesaq/R-Vim-runtime
-" Last Change:	Tue Apr 07, 2015  04:38PM
+" Last Change:	Sun Aug 19, 2018  09:14PM
 
 
 " Only load this indent file when no other was loaded.
@@ -20,7 +20,10 @@ if exists("*GetRmdIndent")
   finish
 endif
 
-function GetMdIndent()
+let s:cpo_save = &cpo
+set cpo&vim
+
+function s:GetMdIndent()
   let pline = getline(v:lnum - 1)
   let cline = getline(v:lnum)
   if prevnonblank(v:lnum - 1) < v:lnum - 1 || cline =~ '^\s*[-\+\*]\s' || cline =~ '^\s*\d\+\.\s\+'
@@ -33,15 +36,31 @@ function GetMdIndent()
   return indent(prevnonblank(v:lnum - 1))
 endfunction
 
+function s:GetYamlIndent()
+  let pline = getline(v:lnum - 1)
+  if pline =~ ':\s*$'
+    return indent(v:lnum) + &sw
+  elseif pline =~ '^\s*- '
+    return indent(v:lnum) + 2
+  endif
+  return indent(prevnonblank(v:lnum - 1))
+endfunction
+
 function GetRmdIndent()
   if getline(".") =~ '^[ \t]*```{r .*}$' || getline(".") =~ '^[ \t]*```$'
     return 0
   endif
   if search('^[ \t]*```{r', "bncW") > search('^[ \t]*```$', "bncW")
     return s:RIndent()
+  elseif v:lnum > 1 && search('^---$', "bnW") == 1 &&
+        \ (search('^---$', "nW") > v:lnum || search('^...$', "nW") > v:lnum)
+    return s:GetYamlIndent()
   else
-    return GetMdIndent()
+    return s:GetMdIndent()
   endif
 endfunction
 
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
 " vim: sw=2

runtime/indent/rnoweb.vim

@@ -21,7 +21,7 @@ else
   let s:TeXIndent = function(substitute(&indentexpr, "()", "", ""))
 endif
 
-unlet b:did_indent
+unlet! b:did_indent
 runtime indent/r.vim
 let s:RIndent = function(substitute(&indentexpr, "()", "", ""))
 let b:did_indent = 1

runtime/indent/teraterm.vim

@@ -1,9 +1,9 @@
 " Vim indent file
 " Language:	Tera Term Language (TTL)
-"		Based on Tera Term Version 4.92
+"		Based on Tera Term Version 4.100
 " Maintainer:	Ken Takata
 " URL:		https://github.com/k-takata/vim-teraterm
-" Last Change:	2017 Jun 13
+" Last Change:	2018-08-31
 " Filenames:	*.ttl
 " License:	VIM License
 

runtime/indent/vim.vim

@@ -10,7 +10,7 @@ endif
 let b:did_indent = 1
 
 setlocal indentexpr=GetVimIndent()
-setlocal indentkeys+==end,=else,=cat,=fina,=END,0\\
+setlocal indentkeys+==end,=else,=cat,=fina,=END,0\\,0=\"\\\ 
 
 let b:undo_indent = "setl indentkeys< indentexpr<"
 
@@ -31,15 +31,17 @@ function GetVimIndent()
   endtry
 endfunc
 
+let s:lineContPat = '^\s*\(\\\|"\\ \)'
+
 function GetVimIndentIntern()
   " Find a non-blank line above the current line.
   let lnum = prevnonblank(v:lnum - 1)
 
-  " If the current line doesn't start with '\' and below a line that starts
-  " with '\', use the indent of the line above it.
+  " If the current line doesn't start with '\' or '"\ ' and below a line that
+  " starts with '\' or '"\ ', use the indent of the line above it.
   let cur_text = getline(v:lnum)
-  if cur_text !~ '^\s*\\'
-    while lnum > 0 && getline(lnum) =~ '^\s*\\'
+  if cur_text !~ s:lineContPat
+    while lnum > 0 && getline(lnum) =~ s:lineContPat
       let lnum = lnum - 1
     endwhile
   endif
@@ -51,10 +53,10 @@ function GetVimIndentIntern()
   let prev_text = getline(lnum)
 
   " Add a 'shiftwidth' after :if, :while, :try, :catch, :finally, :function
-  " and :else.  Add it three times for a line that starts with '\' after
-  " a line that doesn't (or g:vim_indent_cont if it exists).
+  " and :else.  Add it three times for a line that starts with '\' or '"\ '
+  " after a line that doesn't (or g:vim_indent_cont if it exists).
   let ind = indent(lnum)
-  if cur_text =~ '^\s*\\' && v:lnum > 1 && prev_text !~ '^\s*\\'
+  if cur_text =~ s:lineContPat && v:lnum > 1 && prev_text !~ s:lineContPat
     if exists("g:vim_indent_cont")
       let ind = ind + g:vim_indent_cont
     else

runtime/indent/wast.vim

@@ -0,0 +1,17 @@
+" Vim indent file
+" Language:     WebAssembly
+" Maintainer:   rhysd <lin90162@yahoo.co.jp>
+" Last Change:  Jul 29, 2018
+" For bugs, patches and license go to https://github.com/rhysd/vim-wasm
+
+if exists("b:did_indent")
+    finish
+endif
+let b:did_indent = 1
+
+" WebAssembly text format is S-expression. We can reuse LISP indentation
+" logic.
+setlocal indentexpr=lispindent('.')
+setlocal noautoindent nosmartindent
+
+let b:undo_indent = "setl lisp< indentexpr<"

runtime/lang/menu_da.utf-8.vim

@@ -1,6 +1,6 @@
-" Menu Translations:	Danish / Dansk
+" Menu Translations:	Danish
 " Maintainer:		scootergrisen
-" Last Change:		2018 Jun 23
+" Last Change:		2018 Aug 17
 
 " Quit when menu translations have already been done.
 if exists("did_menu_trans")
@@ -43,7 +43,7 @@ menut &Save<Tab>:w	Gem<Tab>:w
 menut Save\ &As\.\.\.<Tab>:sav	Gem\ som\.\.\.<Tab>:sav
 " -SEP2-
 menut Split\ &Diff\ with\.\.\.	Opdel\ diff\ med\.\.\.
-menut Split\ Patched\ &By\.\.\.	Opdel\ "patchet\ af"\.\.\.
+menut Split\ Patched\ &By\.\.\.	Opdel\ patchet\ af\.\.\.
 " -SEP3-
 menut &Print	Udskriv
 " -SEP4-
@@ -79,7 +79,7 @@ menut Question	Spørgsmål
 " Edit
 
 menut Toggle\ Pattern\ &Highlight<Tab>:set\ hls!	Fremhævning\ af\ mønster\ til/fra<Tab>:set\ hls!
-menut Toggle\ &Ignoring\ Case<Tab>:set\ ic!	Ignorerer\ "forskel\ på\ store\ og\ små\ bogstaver"\ til/fra<Tab>:set\ ic!
+menut Toggle\ &Ignoring\ Case<Tab>:set\ ic!	Ignorerer\ forskel\ på\ store\ og\ små\ bogstaver\ til/fra<Tab>:set\ ic!
 menut Toggle\ &Showing\ Matched\ Pairs<Tab>:set\ sm!	Viser\ matchende\ par\ til/fra<Tab>:set\ sm!
 
 menut &Context\ lines	Kontekstlinjer
@@ -117,20 +117,20 @@ menut Toggle\ Tab\ &expanding<Tab>:set\ et!	Udvidelse\ af\ tabulator\ til/fra<Ta
 menut Toggle\ &Auto\ Indenting<Tab>:set\ ai!	Automatisk\ indrykning\ til/fra<Tab>:set\ ai!
 menut Toggle\ &C-Style\ Indenting<Tab>:set\ cin!	Indrykning\ i\ &C-stil\ til/fra<Tab>:set\ cin!
 " -SEP2-
-menut &Shiftwidth	"Shiftwidth"
-" menut &Shiftwidth.2<Tab>:set\ sw=2\ sw?<CR>	"Shiftwidth".2<Tab>:set\ sw=2\ sw?<CR>
-" menut &Shiftwidth.3<Tab>:set\ sw=3\ sw?<CR>	"Shiftwidth".3<Tab>:set\ sw=3\ sw?<CR>
-" menut &Shiftwidth.4<Tab>:set\ sw=4\ sw?<CR>	"Shiftwidth".4<Tab>:set\ sw=4\ sw?<CR>
-" menut &Shiftwidth.5<Tab>:set\ sw=5\ sw?<CR>	"Shiftwidth".5<Tab>:set\ sw=5\ sw?<CR>
-" menut &Shiftwidth.6<Tab>:set\ sw=6\ sw?<CR>	"Shiftwidth".6<Tab>:set\ sw=6\ sw?<CR>
-" menut &Shiftwidth.8<Tab>:set\ sw=8\ sw?<CR>	"Shiftwidth".8<Tab>:set\ sw=8\ sw?<CR>
+menut &Shiftwidth	Shiftwidth
+" menut &Shiftwidth.2<Tab>:set\ sw=2\ sw?<CR>	Shiftwidth.2<Tab>:set\ sw=2\ sw?<CR>
+" menut &Shiftwidth.3<Tab>:set\ sw=3\ sw?<CR>	Shiftwidth.3<Tab>:set\ sw=3\ sw?<CR>
+" menut &Shiftwidth.4<Tab>:set\ sw=4\ sw?<CR>	Shiftwidth.4<Tab>:set\ sw=4\ sw?<CR>
+" menut &Shiftwidth.5<Tab>:set\ sw=5\ sw?<CR>	Shiftwidth.5<Tab>:set\ sw=5\ sw?<CR>
+" menut &Shiftwidth.6<Tab>:set\ sw=6\ sw?<CR>	Shiftwidth.6<Tab>:set\ sw=6\ sw?<CR>
+" menut &Shiftwidth.8<Tab>:set\ sw=8\ sw?<CR>	Shiftwidth.8<Tab>:set\ sw=8\ sw?<CR>
 menut Soft\ &Tabstop	Blødt\ tabulatorstop
-" menut Soft\ &Tabstop.2<Tab>:set\ sts=2\ sts?	Blødt\ "Tabstop".2<Tab>:set\ sts=2\ sts?
-" menut Soft\ &Tabstop.3<Tab>:set\ sts=3\ sts?	Blødt\ "Tabstop".3<Tab>:set\ sts=3\ sts?
-" menut Soft\ &Tabstop.4<Tab>:set\ sts=4\ sts?	Blødt\ "Tabstop".4<Tab>:set\ sts=4\ sts?
-" menut Soft\ &Tabstop.5<Tab>:set\ sts=5\ sts?	Blødt\ "Tabstop".5<Tab>:set\ sts=5\ sts?
-" menut Soft\ &Tabstop.6<Tab>:set\ sts=6\ sts?	Blødt\ "Tabstop".6<Tab>:set\ sts=6\ sts?
-" menut Soft\ &Tabstop.8<Tab>:set\ sts=8\ sts?	Blødt\ "Tabstop".8<Tab>:set\ sts=8\ sts?
+" menut Soft\ &Tabstop.2<Tab>:set\ sts=2\ sts?	Blødt\ Tabstop.2<Tab>:set\ sts=2\ sts?
+" menut Soft\ &Tabstop.3<Tab>:set\ sts=3\ sts?	Blødt\ Tabstop.3<Tab>:set\ sts=3\ sts?
+" menut Soft\ &Tabstop.4<Tab>:set\ sts=4\ sts?	Blødt\ Tabstop.4<Tab>:set\ sts=4\ sts?
+" menut Soft\ &Tabstop.5<Tab>:set\ sts=5\ sts?	Blødt\ Tabstop.5<Tab>:set\ sts=5\ sts?
+" menut Soft\ &Tabstop.6<Tab>:set\ sts=6\ sts?	Blødt\ Tabstop.6<Tab>:set\ sts=6\ sts?
+" menut Soft\ &Tabstop.8<Tab>:set\ sts=8\ sts?	Blødt\ Tabstop.8<Tab>:set\ sts=8\ sts?
 menut Te&xt\ Width\.\.\.	Tekstbredde\.\.\.
 menut &File\ Format\.\.\.	Filformat\.\.\.
 
@@ -168,11 +168,11 @@ menut None	Intet
 " menut arabic	arabisk
 " menut armenian-eastern	armensk\ (østlig)
 " menut armenian-western	armensk\ (vestlig)
-" menut belarusian-jcuken	hviderussisk"\ [belarusian-jcuken]"
+" menut belarusian-jcuken	hviderussisk\ [belarusian-jcuken]
 " menut czech	tjekkisk
 " menut greek	græsk
 " menut hebrew	hebraisk
-" menut hebrewp	hebraisk"\ [hebrewp]"
+" menut hebrewp	hebraisk\ [hebrewp]
 " menut magyar	ungarsk
 " menut persian	persisk
 " menut serbian	serbisk
@@ -362,8 +362,10 @@ if has("toolbar")
 endif
 
 let g:menutrans_set_lang_to = "Sæt sprog til"
-let g:menutrans_spell_change_ARG_to = 'Ændr "%s" til'
-let g:menutrans_spell_add_ARG_to_word_list = 'Tilføj "%s" til ordliste'
+
+" stavegenvejsmenu pop op ting
+let g:menutrans_spell_change_ARG_to = 'Ændr\ "%s"\ til'
+let g:menutrans_spell_add_ARG_to_word_list = 'Tilføj\ "%s"\ til\ ordliste'
 let g:menutrans_spell_ignore_ARG = 'Ignorer "%s"'
 
 let &cpo = s:keepcpo

runtime/macros/maze/main.aap

@@ -1,4 +0,0 @@
-# Aap recipe to build the maze program
-:program maze : mazeansi.c
-
-:program mazeclean : mazeclean.c