patch 8.0.0478: tests use assert_true(0) and assert_false(1) to report errors

Problem:    Tests use assert_true(0) and assert_false(1) to report errors.
Solution:   Use assert_report().

.gitignore

@@ -78,6 +78,7 @@ src/testdir/test.log
 src/testdir/dostmp/*
 src/testdir/messages
 src/testdir/viminfo
+src/testdir/opt_test.vim
 src/memfile_test
 src/json_test
 src/message_test

.travis.yml

@@ -19,14 +19,12 @@ env:
   - BUILD=yes TEST=test COVERAGE=no FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
     "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
     # ASAN build
-  - BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -fsanitize=address -fno-omit-frame-pointer" FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no
+  - BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+    FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan"
     "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
 
 sudo: false
 
-git:
-  depth: 20
-
 # instead of a 2*2*8 matrix (2*os + 2*compiler + 8*env),
 # exclude some builds on mac os x and linux
 # linux: 2*compiler + 5*env + mac: 2*compiler + 2*env
@@ -42,11 +40,13 @@ matrix:
       env: BUILD=yes TEST=scripttests COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
             "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp'"
     - os: osx
-      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -fsanitize=address -fno-omit-frame-pointer" FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no
+      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+            FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan"
             "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
     - os: linux
       compiler: gcc
-      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -fsanitize=address -fno-omit-frame-pointer" FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no
+      env: BUILD=yes TEST=test SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
+            FEATURES=huge SRCDIR=./src CHECK_AUTOCONF=no ASAN_OPTIONS="print_stacktrace=1 log_path=asan"
             "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp'"
     - os: linux
       compiler: clang
@@ -92,7 +92,10 @@ script:
   - if [ "x$SHADOWOPT" != x ]; then make -C src shadow; fi
   - (cd ${SRCDIR} && ./configure --with-features=$FEATURES $CONFOPT --enable-fail-if-missing && if [ "$BUILD" = "yes" ]; then make -j$NPROC; fi)
   - if [ "$BUILD" = "yes" ]; then ${SRCDIR}/vim --version; fi
+  - if [ -n "$ASAN_OPTIONS" ]; then export PATH=/usr/lib/llvm-$(clang -v 2>&1 | sed -n 's/.*version \([1-9]\.[0-9][0-9]*\).*/\1/p')/bin:$PATH; fi
   - make $SHADOWOPT $TEST
+  - if [ -n "$ASAN_OPTIONS" ]; then for log in $(find -type f -name 'asan.*' -size +0); do cat "$log"; err=1; done; fi
+  - if [ -n "$err" ]; then exit 1; fi
 
 after_success:
   - if [ "$COVERAGE" = "yes" ]; then ~/.local/bin/coveralls -b $SRCDIR -x .xs -e ${SRCDIR}/xxd -e ${SRCDIR}/if_perl.c --encodings utf-8 latin-1 EUC-KR; fi

Filelist

@@ -97,6 +97,7 @@ SRC_ALL =	\
 		src/tee/tee.c \
 		src/xxd/xxd.c \
 		src/main.aap \
+		src/testdir/gen_opt_test.vim \
 		src/testdir/main.aap \
 		src/testdir/README.txt \
 		src/testdir/Make_all.mak \
@@ -109,6 +110,7 @@ SRC_ALL =	\
 		src/testdir/setup.vim \
 		src/testdir/gui_init.vim \
 		src/testdir/setup_gui.vim \
+		src/testdir/gui_preinit.vim \
 		src/testdir/test[0-9]*.ok \
 		src/testdir/test[0-9]*a.ok \
 		src/testdir/test_[a-z]*.ok \

Makefile

@@ -120,8 +120,9 @@ MINOR = 0
 #
 # MS-Windows:
 # - Run make on Unix to update the ".mo" files.
-# - Get libintl-8.dll and libiconv-2.dll. E.g. from
+# - Get libintl-8.dll, libiconv-2.dll and libgcc_s_sjlj-1.dll. E.g. from
 #   https://mlocati.github.io/gettext-iconv-windows/ .
+#   Use the "shared-32.zip file and extract the archive to get the files.
 #   Put them in the top directory, "make dosrt" uses them.
 # - > make dossrc
 #   > make dosrt
@@ -468,6 +469,7 @@ dosrt_files: dist prepare no_title.vim
 	    done
 	cp libintl-8.dll dist/vim/$(VIMRTDIR)/
 	cp libiconv-2.dll dist/vim/$(VIMRTDIR)/
+	cp libgcc_s_sjlj-1.dll dist/vim/$(VIMRTDIR)/
 
 
 # Used before uploading.  Don't delete the AAPDIR/sign files!

nsis/gvim.nsi

@@ -385,6 +385,7 @@ SectionEnd
 		File ${VIMRT}\libintl-8.dll
 		File ${VIMRT}\libiconv-2.dll
 		File /nonfatal ${VIMRT}\libwinpthread-1.dll
+		File /nonfatal ${VIMRT}\libgcc_s_sjlj-1.dll
 	SectionEnd
 !endif
 

runtime/autoload/javascriptcomplete.vim

@@ -1,7 +1,7 @@
 " Vim completion script
 " Language:	Java Script
 " Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change:	2006 Apr 30
+" Last Change:	2017 Mar 04
 
 function! javascriptcomplete#CompleteJS(findstart, base)
   if a:findstart
@@ -563,7 +563,7 @@ function! javascriptcomplete#CompleteJS(findstart, base)
 	for i in arguments
 		let g:ia = i
 		let f_elements = matchlist(i, 'function\s\+\(\k\+\)\s*(\(.\{-}\))')
-		if len(f_elements) == 3
+		if len(f_elements) >= 3
 			let b:js_menuinfo[f_elements[1].'('] = f_elements[2]
 		endif
 	endfor

runtime/compiler/bdf.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:         BDF to PCF Conversion
+" Compiler:             BDF to PCF Conversion
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2006-04-19
+" Latest Revision:      2006-04-19
 
 if exists("current_compiler")
   finish

runtime/compiler/gcc.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:         GNU C Compiler
+" Compiler:             GNU C Compiler
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2010-10-14
+" Latest Revision:      2010-10-14
 " 			added line suggested by Anton Lindqvist 2016 Mar 31
 
 if exists("current_compiler")

runtime/compiler/rst.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:         reStructuredText Documentation Format
+" Compiler:             reStructuredText Documentation Format
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2006-04-19
+" Latest Revision:      2006-04-19
 
 if exists("current_compiler")
   finish

runtime/defaults.vim

@@ -1,7 +1,7 @@
 " The default vimrc file.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2016 Sep 02
+" Last change:	2017 Mar 08
 "
 " This is loaded if no vimrc file was found.
 " Except when Vim is run with "-u NONE" or "-C".
@@ -21,7 +21,10 @@ endif
 
 " Use Vim settings, rather than Vi settings (much better!).
 " This must be first, because it changes other options as a side effect.
-set nocompatible
+" Avoid side effects when it was already reset.
+if &compatible
+  set nocompatible
+endif
 
 " Allow backspacing over everything in insert mode.
 set backspace=indent,eol,start

runtime/doc/editing.txt

@@ -276,7 +276,7 @@ If you want to keep the changed buffer without saving it, switch on the
 
 							*:vie* *:view*
 :vie[w][!] [++opt] [+cmd] file
-			When used in Ex mode: Leave |Ex mode|, go back to
+			When used in Ex mode: Leave |Ex-mode|, go back to
 			Normal mode.  Otherwise same as |:edit|, but set
 			'readonly' option for this buffer.  {not in Vi}
 

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.0.  Last change: 2017 Feb 17
+*eval.txt*	For Vim version 8.0.  Last change: 2017 Mar 18
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1789,8 +1789,11 @@ v:progpath	Contains the command with which Vim was invoked, including the
 		|--remote-expr|.
 		To get the full path use: >
 			echo exepath(v:progpath)
-<		NOTE: This does not work when the command is a relative path
+<		If the path is relative it will be expanded to the full path,
-		and the current directory has changed.
+		so that it still works after `:cd`. Thus starting "./vim"
+		results in "/home/user/path/to/vim/src/vim".
+		On MS-Windows the executable may be called "vim.exe", but the
+		".exe" is not added to v:progpath.
 		Read-only.
 
 					*v:register* *register-variable*
@@ -1901,6 +1904,8 @@ v:termresponse	The escape sequence returned by the terminal for the |t_RV|
 
 					*v:testing* *testing-variable*
 v:testing	Must be set before using `test_garbagecollect_now()`.
+		Also, when set certain error messages won't be shown for 2
+		seconds. (e.g. "'dictionary' option is empty") 
 
 				*v:this_session* *this_session-variable*
 v:this_session	Full filename of the last loaded or saved session file.  See
@@ -1981,19 +1986,27 @@ argidx()			Number	current index in the argument list
 arglistid([{winnr} [, {tabnr}]]) Number	argument list id
 argv({nr})			String	{nr} entry of the argument list
 argv()				List	the argument list
-assert_equal({exp}, {act} [, {msg}])     none  assert {exp} is equal to {act}
+assert_equal({exp}, {act} [, {msg}])
-assert_exception({error} [, {msg}])      none  assert {error} is in v:exception
+				none	assert {exp} is equal to {act}
-assert_fails({cmd} [, {error}])          none  assert {cmd} fails
+assert_exception({error} [, {msg}])
-assert_false({actual} [, {msg}])         none  assert {actual} is false
+				none	assert {error} is in v:exception
+assert_fails({cmd} [, {error}])	none	assert {cmd} fails
+assert_false({actual} [, {msg}])
+				none	assert {actual} is false
 assert_inrange({lower}, {upper}, {actual} [, {msg}])
 				none	assert {actual} is inside the range
-assert_match({pat}, {text} [, {msg}])    none  assert {pat} matches {text}
+assert_match({pat}, {text} [, {msg}])
-assert_notequal({exp}, {act} [, {msg}])  none  assert {exp} is not equal {act}
+				none	assert {pat} matches {text}
-assert_notmatch({pat}, {text} [, {msg}]) none  assert {pat} not matches {text}
+assert_notequal({exp}, {act} [, {msg}])
-assert_true({actual} [, {msg}])          none  assert {actual} is true
+				none	assert {exp} is not equal {act}
+assert_notmatch({pat}, {text} [, {msg}])
+				none	assert {pat} not matches {text}
+assert_report({msg})		none	report a test failure
+assert_true({actual} [, {msg}])	none	assert {actual} is true
 asin({expr})			Float	arc sine of {expr}
 atan({expr})			Float	arc tangent of {expr}
 atan2({expr1}, {expr2})		Float	arc tangent of {expr1} / {expr2}
+balloon_show({msg})		none	show {msg} inside the balloon
 browse({save}, {title}, {initdir}, {default})
 				String	put up a file requester
 browsedir({title}, {initdir})	String	put up a directory requester
@@ -2256,6 +2269,8 @@ remote_peek({serverid} [, {retvar}])
 remote_read({serverid})		String	read reply string
 remote_send({server}, {string} [, {idvar}])
 				String	send key sequence
+remote_startserver({name})	none	become server {name}
+				String	send key sequence
 remove({list}, {idx} [, {end}])	any	remove items {idx}-{end} from {list}
 remove({dict}, {key})		any	remove entry {key} from {dict}
 rename({from}, {to})		Number	rename (move) file from {from} to {to}
@@ -2356,14 +2371,15 @@ tempname()			String	name for a temporary file
 test_alloc_fail({id}, {countdown}, {repeat})
 				none	make memory allocation fail
 test_autochdir()		none	enable 'autochdir' during startup
-test_disable_char_avail({expr}) none	test without typeahead
 test_garbagecollect_now()	none	free memory right now for testing
+test_ignore_error({expr})	none	ignore a specific error
 test_null_channel()		Channel	null value for testing
 test_null_dict()		Dict	null value for testing
 test_null_job()			Job	null value for testing
 test_null_list()		List	null value for testing
 test_null_partial()		Funcref	null value for testing
 test_null_string()		String	null value for testing
+test_override({expr}, {val})    none	test with Vim internal overrides
 test_settime({expr})		none	set current time for testing
 timer_info([{id}])		List	information about timers
 timer_pause({id}, {pause})	none	pause or unpause a timer
@@ -2574,7 +2590,10 @@ assert_notmatch({pattern}, {actual} [, {msg}])
 		The opposite of `assert_match()`: add an error message to
 		|v:errors| when {pattern} matches {actual}.
 
-assert_true({actual} [, {msg}])					*assert_true()*
+assert_report({msg})					*assert_report()*
+		Report a test failure directly, using {msg}.
+
+assert_true({actual} [, {msg}])				*assert_true()*
 		When {actual} is not true an error message is added to
 		|v:errors|, like with |assert_equal()|.
 		A value is TRUE when it is a non-zero number.  When {actual}
@@ -2618,6 +2637,28 @@ atan2({expr1}, {expr2})					*atan2()*
 <			2.356194
 		{only available when compiled with the |+float| feature}
 
+balloon_show({msg})					*balloon_show()*
+		Show {msg} inside the balloon.
+		Example: >
+			func GetBalloonContent()
+			   " initiate getting the content
+			   return ''
+			endfunc
+			set balloonexpr=GetBalloonContent()
+
+			func BalloonCallback(result)
+			  call balloon_show(a:result)
+			endfunc
+<
+		The intended use is that fetching the content of the balloon
+		is initiated from 'balloonexpr'.  It will invoke an
+		asynchronous method, in which a callback invokes
+		balloon_show().  The 'balloonexpr' itself can return an
+		empty string or a placeholder.
+
+		When showing a balloon is not possible nothing happens, no
+		error message.
+		{only available when compiled with the +balloon_eval feature}
 
 							*browse()*
 browse({save}, {title}, {initdir}, {default})
@@ -2813,176 +2854,6 @@ ceil({expr})							*ceil()*
 <			4.0
 		{only available when compiled with the |+float| feature}
 
-changenr()						*changenr()*
-		Return the number of the most recent change.  This is the same
-		number as what is displayed with |:undolist| and can be used
-		with the |:undo| command.
-		When a change was made it is the number of that change.  After
-		redo it is the number of the redone change.  After undo it is
-		one less than the number of the undone change.
-
-char2nr({expr}[, {utf8}])					*char2nr()*
-		Return number value of the first char in {expr}.  Examples: >
-			char2nr(" ")		returns 32
-			char2nr("ABC")		returns 65
-<		When {utf8} is omitted or zero, the current 'encoding' is used.
-		Example for "utf-8": >
-			char2nr("<22>")		returns 225
-			char2nr("<22>"[0])		returns 195
-<		With {utf8} set to 1, always treat as utf-8 characters.
-		A combining character is a separate character.
-		|nr2char()| does the opposite.
-
-cindent({lnum})						*cindent()*
-		Get the amount of indent for line {lnum} according the C
-		indenting rules, as with 'cindent'.
-		The indent is counted in spaces, the value of 'tabstop' is
-		relevant.  {lnum} is used just like in |getline()|.
-		When {lnum} is invalid or Vim was not compiled the |+cindent|
-		feature, -1 is returned.
-		See |C-indenting|.
-
-clearmatches()						*clearmatches()*
-		Clears all matches previously defined by |matchadd()| and the
-		|:match| commands.
-
-							*col()*
-col({expr})	The result is a Number, which is the byte index of the column
-		position given with {expr}.  The accepted positions are:
-		    .	    the cursor position
-		    $	    the end of the cursor line (the result is the
-			    number of bytes in the cursor line plus one)
-		    'x	    position of mark x (if the mark is not set, 0 is
-			    returned)
-		    v       In Visual mode: the start of the Visual area (the
-			    cursor is the end).  When not in Visual mode
-			    returns the cursor position.  Differs from |'<| in
-			    that it's updated right away.
-		Additionally {expr} can be [lnum, col]: a |List| with the line
-		and column number. Most useful when the column is "$", to get
-		the last column of a specific line.  When "lnum" or "col" is
-		out of range then col() returns zero.
-		To get the line number use |line()|.  To get both use
-		|getpos()|.
-		For the screen column position use |virtcol()|.
-		Note that only marks in the current file can be used.
-		Examples: >
-			col(".")		column of cursor
-			col("$")		length of cursor line plus one
-			col("'t")		column of mark t
-			col("'" . markname)	column of mark markname
-<		The first column is 1.  0 is returned for an error.
-		For an uppercase mark the column may actually be in another
-		buffer.
-		For the cursor position, when 'virtualedit' is active, the
-		column is one higher if the cursor is after the end of the
-		line.  This can be used to obtain the column in Insert mode: >
-			:imap <F2> <C-O>:let save_ve = &ve<CR>
-				\<C-O>:set ve=all<CR>
-				\<C-O>:echo col(".") . "\n" <Bar>
-				\let &ve = save_ve<CR>
-<
-
-complete({startcol}, {matches})			*complete()* *E785*
-		Set the matches for Insert mode completion.
-		Can only be used in Insert mode.  You need to use a mapping
-		with CTRL-R = (see |i_CTRL-R|).  It does not work after CTRL-O
-		or with an expression mapping.
-		{startcol} is the byte offset in the line where the completed
-		text start.  The text up to the cursor is the original text
-		that will be replaced by the matches.  Use col('.') for an
-		empty string.  "col('.') - 1" will replace one character by a
-		match.
-		{matches} must be a |List|.  Each |List| item is one match.
-		See |complete-items| for the kind of items that are possible.
-		Note that the after calling this function you need to avoid
-		inserting anything that would cause completion to stop.
-		The match can be selected with CTRL-N and CTRL-P as usual with
-		Insert mode completion.  The popup menu will appear if
-		specified, see |ins-completion-menu|.
-		Example: >
-	inoremap <F5> <C-R>=ListMonths()<CR>
-
-	func! ListMonths()
-	  call complete(col('.'), ['January', 'February', 'March',
-		\ 'April', 'May', 'June', 'July', 'August', 'September',
-		\ 'October', 'November', 'December'])
-	  return ''
-	endfunc
-<		This isn't very useful, but it shows how it works.  Note that
-		an empty string is returned to avoid a zero being inserted.
-
-complete_add({expr})				*complete_add()*
-		Add {expr} to the list of matches.  Only to be used by the
-		function specified with the 'completefunc' option.
-		Returns 0 for failure (empty string or out of memory),
-		1 when the match was added, 2 when the match was already in
-		the list.
-		See |complete-functions| for an explanation of {expr}.  It is
-		the same as one item in the list that 'omnifunc' would return.
-
-complete_check()				*complete_check()*
-		Check for a key typed while looking for completion matches.
-		This is to be used when looking for matches takes some time.
-		Returns |TRUE| when searching for matches is to be aborted,
-		zero otherwise.
-		Only to be used by the function specified with the
-		'completefunc' option.
-
-						*confirm()*
-confirm({msg} [, {choices} [, {default} [, {type}]]])
-		Confirm() offers the user a dialog, from which a choice can be
-		made.  It returns the number of the choice.  For the first
-		choice this is 1.
-		Note: confirm() is only supported when compiled with dialog
-		support, see |+dialog_con| and |+dialog_gui|.
-
-		{msg} is displayed in a |dialog| with {choices} as the
-		alternatives.  When {choices} is missing or empty, "&OK" is
-		used (and translated).
-		{msg} is a String, use '\n' to include a newline.  Only on
-		some systems the string is wrapped when it doesn't fit.
-
-		{choices} is a String, with the individual choices separated
-		by '\n', e.g. >
-			confirm("Save changes?", "&Yes\n&No\n&Cancel")
-<		The letter after the '&' is the shortcut key for that choice.
-		Thus you can type 'c' to select "Cancel".  The shortcut does
-		not need to be the first letter: >
-			confirm("file has been modified", "&Save\nSave &All")
-<		For the console, the first letter of each choice is used as
-		the default shortcut key.
-
-		The optional {default} argument is the number of the choice
-		that is made if the user hits <CR>.  Use 1 to make the first
-		choice the default one.  Use 0 to not set a default.  If
-		{default} is omitted, 1 is used.
-
-		The optional {type} argument gives the type of dialog.  This
-		is only used for the icon of the GTK, Mac, Motif and Win32
-		GUI.  It can be one of these values: "Error", "Question",
-		"Info", "Warning" or "Generic".  Only the first character is
-		relevant.  When {type} is omitted, "Generic" is used.
-
-		If the user aborts the dialog by pressing <Esc>, CTRL-C,
-		or another valid interrupt key, confirm() returns 0.
-
-		An example: >
-   :let choice = confirm("What do you want?", "&Apples\n&Oranges\n&Bananas", 2)
-   :if choice == 0
-   :	echo "make up your mind!"
-   :elseif choice == 3
-   :	echo "tasteful"
-   :else
-   :	echo "I prefer bananas myself."
-   :endif
-<		In a GUI dialog, buttons are used.  The layout of the buttons
-		depends on the 'v' flag in 'guioptions'.  If it is included,
-		the buttons are always put vertically.  Otherwise,  confirm()
-		tries to put the buttons in one horizontal line.  If they
-		don't fit, a vertical layout is used anyway.  For some systems
-		the horizontal layout is always used.
-
 ch_canread({handle})						*ch_canread()*
 		Return non-zero when there is something to read from {handle}.
 		{handle} can be a Channel or a Job that has a Channel.
@@ -3172,6 +3043,176 @@ ch_status({handle} [, {options}])				*ch_status()*
 		"err".  For example, to get the error status: >
 			ch_status(job, {"part": "err"})
 <
+changenr()						*changenr()*
+		Return the number of the most recent change.  This is the same
+		number as what is displayed with |:undolist| and can be used
+		with the |:undo| command.
+		When a change was made it is the number of that change.  After
+		redo it is the number of the redone change.  After undo it is
+		one less than the number of the undone change.
+
+char2nr({expr}[, {utf8}])					*char2nr()*
+		Return number value of the first char in {expr}.  Examples: >
+			char2nr(" ")		returns 32
+			char2nr("ABC")		returns 65
+<		When {utf8} is omitted or zero, the current 'encoding' is used.
+		Example for "utf-8": >
+			char2nr("<22>")		returns 225
+			char2nr("<22>"[0])		returns 195
+<		With {utf8} set to 1, always treat as utf-8 characters.
+		A combining character is a separate character.
+		|nr2char()| does the opposite.
+
+cindent({lnum})						*cindent()*
+		Get the amount of indent for line {lnum} according the C
+		indenting rules, as with 'cindent'.
+		The indent is counted in spaces, the value of 'tabstop' is
+		relevant.  {lnum} is used just like in |getline()|.
+		When {lnum} is invalid or Vim was not compiled the |+cindent|
+		feature, -1 is returned.
+		See |C-indenting|.
+
+clearmatches()						*clearmatches()*
+		Clears all matches previously defined by |matchadd()| and the
+		|:match| commands.
+
+							*col()*
+col({expr})	The result is a Number, which is the byte index of the column
+		position given with {expr}.  The accepted positions are:
+		    .	    the cursor position
+		    $	    the end of the cursor line (the result is the
+			    number of bytes in the cursor line plus one)
+		    'x	    position of mark x (if the mark is not set, 0 is
+			    returned)
+		    v       In Visual mode: the start of the Visual area (the
+			    cursor is the end).  When not in Visual mode
+			    returns the cursor position.  Differs from |'<| in
+			    that it's updated right away.
+		Additionally {expr} can be [lnum, col]: a |List| with the line
+		and column number. Most useful when the column is "$", to get
+		the last column of a specific line.  When "lnum" or "col" is
+		out of range then col() returns zero.
+		To get the line number use |line()|.  To get both use
+		|getpos()|.
+		For the screen column position use |virtcol()|.
+		Note that only marks in the current file can be used.
+		Examples: >
+			col(".")		column of cursor
+			col("$")		length of cursor line plus one
+			col("'t")		column of mark t
+			col("'" . markname)	column of mark markname
+<		The first column is 1.  0 is returned for an error.
+		For an uppercase mark the column may actually be in another
+		buffer.
+		For the cursor position, when 'virtualedit' is active, the
+		column is one higher if the cursor is after the end of the
+		line.  This can be used to obtain the column in Insert mode: >
+			:imap <F2> <C-O>:let save_ve = &ve<CR>
+				\<C-O>:set ve=all<CR>
+				\<C-O>:echo col(".") . "\n" <Bar>
+				\let &ve = save_ve<CR>
+<
+
+complete({startcol}, {matches})			*complete()* *E785*
+		Set the matches for Insert mode completion.
+		Can only be used in Insert mode.  You need to use a mapping
+		with CTRL-R = (see |i_CTRL-R|).  It does not work after CTRL-O
+		or with an expression mapping.
+		{startcol} is the byte offset in the line where the completed
+		text start.  The text up to the cursor is the original text
+		that will be replaced by the matches.  Use col('.') for an
+		empty string.  "col('.') - 1" will replace one character by a
+		match.
+		{matches} must be a |List|.  Each |List| item is one match.
+		See |complete-items| for the kind of items that are possible.
+		Note that the after calling this function you need to avoid
+		inserting anything that would cause completion to stop.
+		The match can be selected with CTRL-N and CTRL-P as usual with
+		Insert mode completion.  The popup menu will appear if
+		specified, see |ins-completion-menu|.
+		Example: >
+	inoremap <F5> <C-R>=ListMonths()<CR>
+
+	func! ListMonths()
+	  call complete(col('.'), ['January', 'February', 'March',
+		\ 'April', 'May', 'June', 'July', 'August', 'September',
+		\ 'October', 'November', 'December'])
+	  return ''
+	endfunc
+<		This isn't very useful, but it shows how it works.  Note that
+		an empty string is returned to avoid a zero being inserted.
+
+complete_add({expr})				*complete_add()*
+		Add {expr} to the list of matches.  Only to be used by the
+		function specified with the 'completefunc' option.
+		Returns 0 for failure (empty string or out of memory),
+		1 when the match was added, 2 when the match was already in
+		the list.
+		See |complete-functions| for an explanation of {expr}.  It is
+		the same as one item in the list that 'omnifunc' would return.
+
+complete_check()				*complete_check()*
+		Check for a key typed while looking for completion matches.
+		This is to be used when looking for matches takes some time.
+		Returns |TRUE| when searching for matches is to be aborted,
+		zero otherwise.
+		Only to be used by the function specified with the
+		'completefunc' option.
+
+						*confirm()*
+confirm({msg} [, {choices} [, {default} [, {type}]]])
+		Confirm() offers the user a dialog, from which a choice can be
+		made.  It returns the number of the choice.  For the first
+		choice this is 1.
+		Note: confirm() is only supported when compiled with dialog
+		support, see |+dialog_con| and |+dialog_gui|.
+
+		{msg} is displayed in a |dialog| with {choices} as the
+		alternatives.  When {choices} is missing or empty, "&OK" is
+		used (and translated).
+		{msg} is a String, use '\n' to include a newline.  Only on
+		some systems the string is wrapped when it doesn't fit.
+
+		{choices} is a String, with the individual choices separated
+		by '\n', e.g. >
+			confirm("Save changes?", "&Yes\n&No\n&Cancel")
+<		The letter after the '&' is the shortcut key for that choice.
+		Thus you can type 'c' to select "Cancel".  The shortcut does
+		not need to be the first letter: >
+			confirm("file has been modified", "&Save\nSave &All")
+<		For the console, the first letter of each choice is used as
+		the default shortcut key.
+
+		The optional {default} argument is the number of the choice
+		that is made if the user hits <CR>.  Use 1 to make the first
+		choice the default one.  Use 0 to not set a default.  If
+		{default} is omitted, 1 is used.
+
+		The optional {type} argument gives the type of dialog.  This
+		is only used for the icon of the GTK, Mac, Motif and Win32
+		GUI.  It can be one of these values: "Error", "Question",
+		"Info", "Warning" or "Generic".  Only the first character is
+		relevant.  When {type} is omitted, "Generic" is used.
+
+		If the user aborts the dialog by pressing <Esc>, CTRL-C,
+		or another valid interrupt key, confirm() returns 0.
+
+		An example: >
+   :let choice = confirm("What do you want?", "&Apples\n&Oranges\n&Bananas", 2)
+   :if choice == 0
+   :	echo "make up your mind!"
+   :elseif choice == 3
+   :	echo "tasteful"
+   :else
+   :	echo "I prefer bananas myself."
+   :endif
+<		In a GUI dialog, buttons are used.  The layout of the buttons
+		depends on the 'v' flag in 'guioptions'.  If it is included,
+		the buttons are always put vertically.  Otherwise,  confirm()
+		tries to put the buttons in one horizontal line.  If they
+		don't fit, a vertical layout is used anyway.  For some systems
+		the horizontal layout is always used.
+
 							*copy()*
 copy({expr})	Make a copy of {expr}.  For Numbers and Strings this isn't
 		different from using {expr} directly.
@@ -3428,7 +3469,7 @@ execute({command} [, {silent}])					*execute()*
 			""		no `:silent` used
 			"silent"	`:silent` used
 			"silent!"	`:silent!` used
-		The default is 'silent'.  Note that with "silent!", unlike
+		The default is "silent".  Note that with "silent!", unlike
 		`:redir`, error messages are dropped.  When using an external
 		command the screen may be messed up, use `system()` instead.
 							*E930*
@@ -3894,11 +3935,14 @@ foldtext()	Returns a String, to be displayed for a closed fold.  This is
 		|v:foldstart|, |v:foldend| and |v:folddashes| variables.
 		The returned string looks like this: >
 			+-- 45 lines: abcdef
-<		The number of dashes depends on the foldlevel.  The "45" is
+<		The number of leading dashes depends on the foldlevel.  The
-		the number of lines in the fold.  "abcdef" is the text in the
+		"45" is the number of lines in the fold.  "abcdef" is the text
-		first non-blank line of the fold.  Leading white space, "//"
+		in the first non-blank line of the fold.  Leading white space,
-		or "/*" and the text from the 'foldmarker' and 'commentstring'
+		"//" or "/*" and the text from the 'foldmarker' and
-		options is removed.
+		'commentstring' options is removed.
+		When used to draw the actual foldtext, the rest of the line
+		will be filled with the fold char from the 'fillchars'
+		setting.
 		{not available when compiled without the |+folding| feature}
 
 foldtextresult({lnum})					*foldtextresult()*
@@ -4030,10 +4074,10 @@ get({dict}, {key} [, {default}])
 get({func}, {what})
 		Get an item with from Funcref {func}.  Possible values for
 		{what} are:
-			'name'	The function name
+			"name"	The function name
-			'func'	The function
+			"func"	The function
-			'dict'	The dictionary
+			"dict"	The dictionary
-			'args'	The list with arguments
+			"args"	The list with arguments
 
 							*getbufinfo()*
 getbufinfo([{expr}])
@@ -6343,6 +6387,7 @@ remote_send({server}, {string} [, {idvar}])
 		See also |clientserver| |RemoteReply|.
 		This function is not available in the |sandbox|.
 		{only available when compiled with the |+clientserver| feature}
+
 		Note: Any errors will be reported in the server and may mess
 		up the display.
 		Examples: >
@@ -6354,6 +6399,12 @@ remote_send({server}, {string} [, {idvar}])
 		:echo remote_send("gvim", ":sleep 10 | echo ".
 		 \ 'server2client(expand("<client>"), "HELLO")<CR>')
 <
+					*remote_startserver()* *E941* *E942*
+remote_startserver({name})
+		Become the server {name}.  This fails if already running as a
+		server, when |v:servername| is not empty.
+		{only available when compiled with the |+clientserver| feature}
+
 remove({list}, {idx} [, {end}])				*remove()*
 		Without {end}: Remove the item at {idx} from |List| {list} and
 		return the item.
@@ -7711,7 +7762,7 @@ taglist({expr})							*taglist()*
 		may appear, they give the name of the entity the tag is
 		contained in.
 
-		The ex-command 'cmd' can be either an ex search pattern, a
+		The ex-command "cmd" can be either an ex search pattern, a
 		line number or a line number followed by a byte number.
 
 		If there are no matching tags, then an empty list is returned.
@@ -7770,20 +7821,21 @@ test_autochdir()					*test_autochdir()*
 		Set a flag to enable the effect of 'autochdir' before Vim
 		startup has finished.
 
-						*test_disable_char_avail()*
-test_disable_char_avail({expr})
-		When {expr} is 1 the internal char_avail() function will
-		return |FALSE|.  When {expr} is 0 the char_avail() function will
-		function normally.
-		Only use this for a test where typeahead causes the test not
-		to work.  E.g., to trigger the CursorMovedI autocommand event.
-
 test_garbagecollect_now()			 *test_garbagecollect_now()*
 		Like garbagecollect(), but executed right away.  This must
 		only be called directly to avoid any structure to exist
 		internally, and |v:testing| must have been set before calling
 		any function.
 
+test_ignore_error({expr})			 *test_ignore_error()*
+		Ignore any error containing {expr}.  A normal message is given
+		instead.
+		This is only meant to be used in tests, where catching the
+		error with try/catch cannot be used (because it skips over
+		following code).
+		{expr} is used literally, not as a pattern.
+		There is currently no way to revert this.
+
 test_null_channel()					*test_null_channel()*
 		Return a Channel that is null. Only useful for testing.
 		{only available when compiled with the +channel feature}
@@ -7804,6 +7856,18 @@ test_null_partial()					*test_null_partial()*
 test_null_string()					*test_null_string()*
 		Return a String that is null. Only useful for testing.
 
+test_override({name}, {val})				*test_override()*
+		Overrides certain parts of Vims internal processing to be able
+		to run tests. Only to be used for testing Vim!
+		The override is enabled when {val} is non-zero and removed
+		when {val} is zero.
+		Current supported values for name are: 
+
+		name	     effect when {val} is non-zero ~
+		redraw       disable the redrawing() function
+		char_avail   disable the char_avail() function
+		ALL	     clear all overrides ({val} is not used)
+
 test_settime({expr})					*test_settime()*
 		Set the time Vim uses internally.  Currently only used for
 		timestamps in the history, as they are used in viminfo, and

runtime/doc/fold.txt

@@ -64,7 +64,7 @@ whichever is lower.  These are empty or white lines and lines starting
 with a character in 'foldignore'.  White space is skipped before checking for
 characters in 'foldignore'.  For C use "#" to ignore preprocessor lines.
 
-When you want to ignore lines in another way, use the 'expr' method.  The
+When you want to ignore lines in another way, use the "expr" method.  The
 |indent()| function can be used in 'foldexpr' to get the indent of a line.
 
 
@@ -139,7 +139,7 @@ fold level.  But note that foldlevel() may return -1 if the level is not known
 yet.  And it returns the level at the start of the line, while a fold might
 end in that line.
 
-It may happened that folds are not updated properly.  You can use |zx| or |zX|
+It may happen that folds are not updated properly.  You can use |zx| or |zX|
 to force updating folds.
 
 

runtime/doc/hangulin.txt

@@ -81,8 +81,8 @@ And there should be no ':set guifont'.  If it exists, then Gvim ignores
 ':set guifontset'.  It means VIM runs without fontset supporting.
 So, you can see only English.  Hangul does not be correctly displayed.
 
-After 'fontset' feature is enabled, VIM does not allow using english
+After "fontset" feature is enabled, VIM does not allow using english
-font only in 'font' setting for syntax.
+font only in "font" setting for syntax.
 For example, if you use >
    :set guifontset=eng_font,your_font
 in your .gvimrc, then you should do for syntax >

runtime/doc/helphelp.txt

@@ -314,7 +314,7 @@ the applicable Vim version.  The last field specifies the last modification
 date of the file.  Each field is separated by a tab.
 
 At the bottom of the help file, place a Vim modeline to set the 'textwidth'
-and 'tabstop' options and the 'filetype' to 'help'.  Never set a global option
+and 'tabstop' options and the 'filetype' to "help".  Never set a global option
 in such a modeline, that can have consequences undesired by whoever reads that
 help.
 

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 8.0.  Last change: 2017 Feb 17
+*if_pyth.txt*   For Vim version 8.0.  Last change: 2017 Mar 09
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -17,6 +17,7 @@ The Python Interface to Vim				*python* *Python*
 9. Dynamic loading				|python-dynamic|
 10. Python 3					|python3|
 11. Python X					|python_x|
+12. Building with Python support		|python-building|
 
 {Vi does not have any of these commands}
 
@@ -174,8 +175,8 @@ vim.eval(str)						*python-eval*
 
 	    :py tagList = vim.eval('taglist("eval_expr")')
 <	The latter will return a python list of python dicts, for instance:
-	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name':
+	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name': ~
-	'eval_expr', 'kind': 'f', 'filename': './src/eval.c'}]
+	'eval_expr', 'kind': 'f', 'filename': './src/eval.c'}] ~
 
 vim.bindeval(str)					*python-bindeval*
 	Like |python-eval|, but returns special objects described in 
@@ -819,7 +820,7 @@ the other one from being available.
 11. Python X						*python_x* *pythonx*
 
 Because most python code can be written so that it works with python 2.6+ and
-python 3 the pyx* functions and commands have been writen.  They work exactly
+python 3 the pyx* functions and commands have been written.  They work exactly
 the same as the Python 2 and 3 variants, but select the Python version using
 the 'pyxversion' setting.
 
@@ -867,7 +868,7 @@ When compiled with both |+python| and |+python3|, the test depends on the
 it is not available then Python 2.  If 'pyxversion' is 2 or 3, it tests only
 Python 2 or 3 respectively.
 
-Note that for has('pythonx') to work it may try to dynamically load Python 3
+Note that for `has('pythonx')` to work it may try to dynamically load Python 3
 or 2.  This may have side effects, especially when Vim can only load one of
 the two.
 
@@ -879,5 +880,27 @@ If a user prefers Python 2 and want to fallback to Python 3, he needs to set
 	  set pyx=3
 	endif
 
+==============================================================================
+12. Building with Python support			*python-building*
+
+A few hints for building with Python 2 or 3 support.
+
+UNIX
+
+See src/Makefile for how to enable including the Python interface.
+
+On Ubuntu you will want to install these packages for Python 2:
+	python
+	python-dev
+For Python 3:
+	python3
+	pytyon3-dev
+For Python 3.6:
+	python3.6
+	pytyon3.6-dev
+
+If you have more than one version of Python 3, you need to link python3 to the
+one you prefer, before running configure.
+
 ==============================================================================
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/if_ruby.txt

@@ -72,7 +72,7 @@ To see what version of Ruby you have: >
 
 							*:rubyfile* *:rubyf*
 :rubyf[ile] {file}	Execute the Ruby script in {file}.  This is the same as
-			":ruby load 'file'", but allows file name completion.
+			`:ruby load 'file'`, but allows file name completion.
 
 Executing Ruby commands is not possible in the |sandbox|.
 

runtime/doc/indent.txt

@@ -324,6 +324,21 @@ The examples below assume a 'shiftwidth' of 4.
 		  {                          {
 		      void function();       void function();
 		  }                          }
+<
+							*cino-E*
+	EN    Indent inside C++ linkage specifications (extern "C" or
+	      extern "C++") N characters extra compared to a normal block.
+	      (default 0).
+
+		cino=			   cino=E-s >
+		  extern "C" {               extern "C" {
+		      void function();       void function();
+		  }                          }
+
+		  extern "C"                 extern "C"
+		  {                          {
+		      void function();       void function();
+		  }                          }
 <
 							*cino-p*
 	pN    Parameter declarations for K&R-style function declarations will
@@ -554,7 +569,7 @@ The examples below assume a 'shiftwidth' of 4.
 
 
 The defaults, spelled out in full, are:
-	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,N0,ps,ts,is,+s,
+	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,N0,E0,ps,ts,is,+s,
 			c3,C0,/0,(2s,us,U0,w0,W0,k0,m0,j0,J0,)20,*70,#0
 
 Vim puts a line in column 1 if:

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 8.0.  Last change: 2016 Sep 27
+*index.txt*     For Vim version 8.0.  Last change: 2017 Feb 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1004,10 +1004,12 @@ tag		command	      action in Command-line editing mode	~
 |c_<CR>|	<CR>		execute entered command
 |c_CTRL-M|	CTRL-M		same as <CR>
 |c_CTRL-N|	CTRL-N		after using 'wildchar' with multiple matches:
-				go to next match, otherwise: same as <Down>
+				go to next match, otherwise: recall older
+				command-line from history.
 		CTRL-O		not used
 |c_CTRL-P|	CTRL-P		after using 'wildchar' with multiple matches:
-				go to previous match, otherwise: same as <Up>
+				go to previous match, otherwise: recall older
+				command-line from history.
 |c_CTRL-Q|	CTRL-Q		same as CTRL-V, unless it's used for terminal
 				control flow
 |c_CTRL-R|	CTRL-R {0-9a-z"%#*:= CTRL-F CTRL-P CTRL-W CTRL-A}

runtime/doc/insert.txt

@@ -1103,7 +1103,7 @@ items:
 	empty		when non-zero this match will be added even when it is
 			an empty string
 
-All of these except 'icase', 'dup' and 'empty' must be a string.  If an item
+All of these except "icase", "dup" and "empty" must be a string.  If an item
 does not meet these requirements then an error message is given and further
 items in the list are not used.  You can mix string and Dictionary items in
 the returned list.

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.0.  Last change: 2016 Oct 15
+*map.txt*       For Vim version 8.0.  Last change: 2017 Mar 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -584,7 +584,8 @@ Upper and lowercase differences are ignored.
 
 							*map-comments*
 It is not possible to put a comment after these commands, because the '"'
-character is considered to be part of the {lhs} or {rhs}.
+character is considered to be part of the {lhs} or {rhs}. However, one can
+use |", since this starts a new, empty command with a comment.
 
 							*map_bar* *map-bar*
 Since the '|' character is used to separate a map command from the next

runtime/doc/mlang.txt

@@ -1,4 +1,4 @@
-*mlang.txt*     For Vim version 8.0.  Last change: 2016 Jan 16
+*mlang.txt*     For Vim version 8.0.  Last change: 2017 Mar 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -179,6 +179,7 @@ Send an e-mail to the Vim maintainer <maintainer@vim.org>.
 			special characters like "&" and "<Tab>" need to be
 			included.  Spaces and dots need to be escaped with a
 			backslash, just like in other |:menu| commands.
+			Case in {english} is ignored.
 
 See the $VIMRUNTIME/lang directory for examples.
 

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.0.  Last change: 2016 Nov 24
+*motion.txt*    For Vim version 8.0.  Last change: 2017 Mar 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -193,7 +193,7 @@ l		or					*l*
 
 							*$* *<End>* *<kEnd>*
 $  or <End>		To the end of the line.  When a count is given also go
-			[count - 1] lines downward |inclusive|.
+			[count - 1] lines downward. |inclusive| motion.
 			In Visual mode the cursor goes to just after the last
 			character in the line.
 			When 'virtualedit' is active, "$" may move the cursor

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.0.  Last change: 2017 Feb 09
+*options.txt*	For Vim version 8.0.  Last change: 2017 Mar 09
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -727,6 +727,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	which can be easier to read at certain sizes on certain displays.
 	Setting this option can sometimes cause problems if 'guifont' is set
 	to its default (empty string).
+	NOTE: This option is reset when 'compatible' is set.
 
 			*'autochdir'* *'acd'* *'noautochdir'* *'noacd'*
 'autochdir' 'acd'	boolean (default off)
@@ -760,6 +761,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	- Disable the use of 'keymap' (without changing its value).
 	Note that 'arabicshape' and 'delcombine' are not reset (it is a global
 	option).
+	NOTE: This option is reset when 'compatible' is set.
 	Also see |arabic.txt|.
 
 					*'arabicshape'* *'arshape'*
@@ -781,6 +783,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	form.
 	Arabic is a complex language which requires other settings, for
 	further details see |arabic.txt|.
+	NOTE: This option is set when 'compatible' is set.
 
 			*'autoindent'* *'ai'* *'noautoindent'* *'noai'*
 'autoindent' 'ai'	boolean	(default off)
@@ -993,6 +996,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	the system may refuse to do this.  In that case the "auto" value will
 	again not rename the file.
 
+	NOTE: This option is set to the Vi default value when 'compatible' is
+	set and to the Vim default value when 'compatible' is reset.
+
 						*'backupdir'* *'bdir'*
 'backupdir' 'bdir'	string	(default for Amiga: ".,t:",
 				 for MS-DOS and Win32: ".,$TEMP,c:/tmp,c:/temp"
@@ -1120,6 +1126,9 @@ A jump table for the options with a short description can be found at |Q_op|.
     set bexpr=MyBalloonExpr()
     set ballooneval
 <
+	Also see |balloon_show()|, can be used if the content of the balloon
+	is to be fetched asynchronously.
+
 	NOTE: The balloon is displayed only if the cursor is on a text
 	character.  If the result of evaluating 'balloonexpr' is not empty,
 	Vim does not try to send a message to an external debugger (Netbeans
@@ -1136,6 +1145,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	When they are supported "\n" characters will start a new line.  If the
 	expression evaluates to a |List| this is equal to using each List item
 	as a string and putting "\n" in between them.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 						*'belloff'* *'bo'*
 'belloff' 'bo'		string	(default "")
@@ -1173,8 +1183,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	wildmode    More matches in |cmdline-completion| available
 		    (depends on the 'wildmode' setting).
 
-	This is most useful, to fine tune when in insert mode the bell should
+	This is most useful to fine tune when in Insert mode the bell should
-	be rung. For normal mode and ex commands, the bell is often rung to
+	be rung. For Normal mode and Ex commands, the bell is often rung to
 	indicate that an error occurred. It can be silenced by adding the
 	"error" keyword.
 
@@ -1256,6 +1266,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Every wrapped line will continue visually indented (same amount of
 	space as the beginning of that line), thus preserving horizontal blocks
 	of text.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'breakindentopt'* *'briopt'*
 'breakindentopt' 'briopt' string (default empty)
@@ -1432,6 +1443,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 		:exe "set cedit=\<Esc>"
 <	|Nvi| also has this option, but it only uses the first character.
 	See |cmdwin|.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 				*'charconvert'* *'ccv'* *E202* *E214* *E513*
 'charconvert' 'ccv'	string (default "")
@@ -1702,12 +1715,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	This option has the effect of making Vim either more Vi-compatible, or
 	make Vim behave in a more useful way.
+
 	This is a special kind of option, because when it's set or reset,
-	other options are also changed as a side effect.  CAREFUL: Setting or
+	other options are also changed as a side effect.
-	resetting this option can have a lot of unexpected effects: Mappings
+	NOTE: Setting or resetting this option can have a lot of unexpected
-	are interpreted in another way, undo behaves differently, etc.  If you
+	effects: Mappings are interpreted in another way, undo behaves
-	set this option in your vimrc file, you should probably put it at the
+	differently, etc.  If you set this option in your vimrc file, you
-	very start.
+	should probably put it at the very start.
+
 	By default this option is on and the Vi defaults are used for the
 	options.  This default was chosen for those people who want to use Vim
 	just like Vi, and don't even (want to) know about the 'compatible'
@@ -1722,70 +1737,98 @@ A jump table for the options with a short description can be found at |Q_op|.
 	|posix-compliance|.
 	You can also set this option with the "-C" argument, and reset it with
 	"-N".  See |-C| and |-N|.
-	Switching this option off makes the Vim defaults be used for options
+	See 'cpoptions' for more fine tuning of Vi compatibility.
-	that have a different Vi and Vim default value.  See the options
-	marked with a '+' below.  Other options are not modified.
-	At the moment this option is set, several other options will be set
-	or reset to make Vim as Vi-compatible as possible.  See the table
-	below.  This can be used if you want to revert to Vi compatible
-	editing.
-	See also 'cpoptions'.
 
-	option		+ set value	effect	~
+	When this option is set, numerous other options are set to make Vim as
+	Vi-compatible as possible.  When this option is unset, various options
+	are set to make Vim more useful.  The table below lists all the
+	options affected.
+	The {?} column indicates when the options are affected:
+	+  Means that the option is set to the value given in {set value} when
+	   'compatible' is set.
+	&  Means that the option is set to the value given in {set value} when
+	   'compatible' is set AND is set to its Vim default value when
+	   'compatible' is unset.
+	-  Means the option is NOT changed when setting 'compatible' but IS
+	   set to its Vim default when 'compatible' is unset.
+	The {effect} column summarises the change when 'compatible' is set.
 
-	'allowrevins'	  off		no CTRL-_ command
+	option		? set value	effect ~
-	'backspace'	  ""		normal backspace
+
-	'backupcopy'	  Unix: "yes"	backup file is a copy
+	'allowrevins'	+ off		no CTRL-_ command
-			  else: "auto"  copy or rename backup file
+	'antialias'	+ off		don't use antialiased fonts
-	'backup'	  off		no backup file
+	'arabic'	+ off	 	reset arabic-related options
-	'cedit'		+ ""		no key to open the |cmdwin|
+	'arabicshape'	+ on		correct character shapes
-	'cindent'	  off		no C code indentation
+	'backspace'	+ ""		normal backspace
-	'cpoptions'	+ (all flags)	Vi-compatible flags
+	'backup'	+ off		no backup file
-	'cscopetag'	  off		don't use cscope for ":tag"
+	'backupcopy'	& Unix: "yes"	backup file is a copy
-	'cscopetagorder'  0		see |cscopetagorder|
+			  else: "auto"	copy or rename backup file
-	'cscopeverbose'	  off		see |cscopeverbose|
+	'balloonexpr'	+ ""		text to show in evaluation balloon
-	'digraph'	  off		no digraphs
+	'breakindent'	+ off		don't indent when wrapping lines
-	'esckeys'	+ off		no <Esc>-keys in Insert mode
+	'cedit'		- {unchanged}	{set vim default only on resetting 'cp'}
-	'expandtab'	  off		tabs not expanded to spaces
+	'cindent'	+ off		no C code indentation
-	'fileformats'	+ ""		no automatic file format detection,
+	'compatible'	- {unchanged}	{set vim default only on resetting 'cp'}
+	'copyindent'	+ off		don't copy indent structure
+	'cpoptions'	& (all flags)	Vi-compatible flags
+	'cscopepathcomp'+ 0		don't show directories in tags list
+	'cscoperelative'+ off		
+	'cscopetag'	+ off		don't use cscope for ":tag"
+	'cscopetagorder'+ 0		see |cscopetagorder|
+	'cscopeverbose'	+ off		see |cscopeverbose|
+	'delcombine'	+ off		unicode: delete whole char combination
+	'digraph'	+ off		no digraphs
+	'esckeys'	& off		no <Esc>-keys in Insert mode
+	'expandtab'	+ off		tabs not expanded to spaces
+	'fileformats'	& ""		no automatic file format detection,
 			  "dos,unix"	except for DOS, Windows and OS/2
-	'formatoptions'	+ "vt"		Vi compatible formatting
+	'formatexpr'	+ ""		use 'formatprg' for auto-formatting
-	'gdefault'	  off		no default 'g' flag for ":s"
+	'formatoptions'	& "vt"		Vi compatible formatting
-	'history'	+ 0		no commandline history
+	'gdefault'	+ off		no default 'g' flag for ":s"
-	'hkmap'		  off		no Hebrew keyboard mapping
+	'history'	& 0		no commandline history
-	'hkmapp'	  off		no phonetic Hebrew keyboard mapping
+	'hkmap'		+ off		no Hebrew keyboard mapping
-	'hlsearch'	  off		no highlighting of search matches
+	'hkmapp'	+ off		no phonetic Hebrew keyboard mapping
-	'incsearch'	  off		no incremental searching
+	'hlsearch'	+ off		no highlighting of search matches
-	'indentexpr'	  ""		no indenting by expression
+	'incsearch'	+ off		no incremental searching
-	'insertmode'	  off		do not start in Insert mode
+	'indentexpr'	+ ""		no indenting by expression
-	'iskeyword'	+ "@,48-57,_"	keywords contain alphanumeric
+	'insertmode'	+ off		do not start in Insert mode
+	'iskeyword'	& "@,48-57,_"	keywords contain alphanumeric
 						characters and '_'
-	'joinspaces'	  on		insert 2 spaces after period
+	'joinspaces'	+ on		insert 2 spaces after period
-	'modeline'	+ off		no modelines
+	'modeline'	& off		no modelines
-	'more'		+ off		no pauses in listings
+	'more'		& off		no pauses in listings
-	'revins'	  off		no reverse insert
+	'mzquantum'	- {unchanged}	{set vim default only on resetting 'cp'}
-	'ruler'		  off		no ruler
+	'numberwidth'	& 8		min number of columns for line number
-	'scrolljump'	  1		no jump scroll
+	'preserveindent'+ off		don't preserve current indent structure
-	'scrolloff'	  0		no scroll offset
+						when changing it
-	'shiftround'	  off		indent not rounded to shiftwidth
+	'revins'	+ off		no reverse insert
-	'shortmess'	+ ""		no shortening of messages
+	'ruler'		+ off		no ruler
-	'showcmd'	+ off		command characters not shown
+	'scrolljump'	+ 1		no jump scroll
-	'showmode'	+ off		current mode not shown
+	'scrolloff'	+ 0		no scroll offset
-	'smartcase'	  off		no automatic ignore case switch
+	'shelltemp'	- {unchanged}	{set vim default only on resetting 'cp'}
-	'smartindent'	  off		no smart indentation
+	'shiftround'	+ off		indent not rounded to shiftwidth
-	'smarttab'	  off		no smart tab size
+	'shortmess'	& ""		no shortening of messages
-	'softtabstop'	  0		tabs are always 'tabstop' positions
+	'showcmd'	& off		command characters not shown
-	'startofline'	  on		goto startofline with some commands
+	'showmode'	& off		current mode not shown
-	'tagrelative'	+ off		tag file names are not relative
+	'sidescrolloff'	+ 0		cursor moves to edge of screen in scroll
-	'textauto'	+ off		no automatic textmode detection
+	'smartcase'	+ off		no automatic ignore case switch
-	'textwidth'	  0		no automatic line wrap
+	'smartindent'	+ off		no smart indentation
-	'tildeop'	  off		tilde is not an operator
+	'smarttab'	+ off		no smart tab size
-	'ttimeout'	  off		no terminal timeout
+	'softtabstop'	+ 0		tabs are always 'tabstop' positions
-	'viminfo'       + {unchanged}	no viminfo file	
+	'startofline'	+ on		goto startofline with some commands
-	'whichwrap'	+ ""		left-right movements don't wrap
+	'tagcase'	& "followic"	'ignorecase' when searching tags file
-	'wildchar'	+ CTRL-E	only when the current value is <Tab>
+	'tagrelative'	& off		tag file names are not relative
+	'termguicolors'	+ off		don't use highlight-(guifg|guibg)
+	'textauto'	& off		no automatic textmode detection
+	'textwidth'	+ 0		no automatic line wrap
+	'tildeop'	+ off		tilde is not an operator
+	'ttimeout'	+ off		no terminal timeout
+	'undofile'	+ off		don't use an undo file
+	'viminfo'       - {unchanged}	{set Vim default only on resetting 'cp'}
+	'virtualedit'	+ ""		cursor can only be placed on characters
+	'whichwrap'	& ""		left-right movements don't wrap
+	'wildchar'	& CTRL-E	only when the current value is <Tab>
 					use CTRL-E for cmdline completion
-	'writebackup'	  on or off	depends on the |+writebackup| feature
+	'writebackup'	+ on or off	depends on the |+writebackup| feature
 
 						*'complete'* *'cpt'* *E535*
 'complete' 'cpt'	string	(default: ".,w,b,u,t,i")
@@ -1960,7 +2003,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	existing line.  'expandtab' has no effect on these characters, a Tab
 	remains a Tab.  If the new indent is greater than on the existing
 	line, the remaining space is filled in the normal manner.
-	NOTE: 'copyindent' is reset when 'compatible' is set.
+	NOTE: This option is reset when 'compatible' is set.
 	Also see 'preserveindent'.
 
 						*'cpoptions'* *'cpo'* *cpo*
@@ -2321,6 +2364,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	Determines how many components of the path to show in a list of tags.
 	See |cscopepathcomp|.
+	NOTE: This option is set to 0 when 'compatible' is set.
 
 						*'cscopeprg'* *'csprg'*
 'cscopeprg' 'csprg'	string	(default "cscope")
@@ -2350,6 +2394,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	In the absence of a prefix (-P) for cscope. setting this option enables
 	to use the basename of cscope.out path as the prefix.
 	See |cscoperelative|.
+	NOTE: This option is reset when 'compatible' is set.
 
 				*'cscopetag'* *'cst'* *'nocscopetag'* *'nocst'*
 'cscopetag' 'cst'	boolean (default off)
@@ -2469,6 +2514,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This is useful for Arabic, Hebrew and many other languages where one
 	may have combining characters overtop of base characters, and want
 	to remove only the combining ones.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'dictionary'* *'dict'*
 'dictionary' 'dict'	string	(default "")
@@ -2883,6 +2929,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	done when writing the file.  For reading see below.
 	When 'fileencoding' is empty, the same value as 'encoding' will be
 	used (no conversion when reading or writing a file).
+	No error will be given when the value is set, only when it is used,
+	only when writing a file.
 	Conversion will also be done when 'encoding' and 'fileencoding' are
 	both a Unicode encoding and 'fileencoding' is not utf-8.  That's
 	because internally Unicode is always stored as utf-8.
@@ -3387,6 +3435,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.  That stops the option from working,
 	since changing the buffer text is not allowed.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 					*'formatoptions'* *'fo'*
 'formatoptions' 'fo'	string (Vim default: "tcq", Vi default: "vt")
@@ -4046,31 +4095,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 	define one.  The default uses a different group for each occasion.
 	See |highlight-default| for the default highlight groups.
 
-				 *'hlsearch'* *'hls'* *'nohlsearch'* *'nohls'*
-'hlsearch' 'hls'	boolean	(default off)
-			global
-			{not in Vi}
-			{not available when compiled without the
-			|+extra_search| feature}
-	When there is a previous search pattern, highlight all its matches.
-	The type of highlighting used can be set with the 'l' occasion in the
-	'highlight' option.  This uses the "Search" highlight group by
-	default.  Note that only the matching text is highlighted, any offsets
-	are not applied.
-	See also: 'incsearch' and |:match|.
-	When you get bored looking at the highlighted matches, you can turn it
-	off with |:nohlsearch|.  This does not change the option value, as
-	soon as you use a search command, the highlighting comes back.
-	'redrawtime' specifies the maximum time spent on finding matches.
-	When the search pattern can match an end-of-line, Vim will try to
-	highlight all of the matched text.  However, this depends on where the
-	search starts.  This will be the first line in the window or the first
-	line below a closed fold.  A match in a previous line which is not
-	drawn may not continue in a newly drawn line.
-	You can specify whether the highlight status is restored on startup
-	with the 'h' flag in 'viminfo' |viminfo-h|.
-	NOTE: This option is reset when 'compatible' is set.
-
 						*'history'* *'hi'*
 'history' 'hi'		number	(Vim default: 50, Vi default: 0,
 						 set to 200 in |defaults.vim|)
@@ -4103,6 +4127,31 @@ A jump table for the options with a short description can be found at |Q_op|.
 	When on, phonetic keyboard mapping is used.  'hkmap' must also be on.
 	This is useful if you have a non-Hebrew keyboard.
 	See |rileft.txt|.
+	NOTE: This option is reset when 'compatible' is set.
+
+				 *'hlsearch'* *'hls'* *'nohlsearch'* *'nohls'*
+'hlsearch' 'hls'	boolean	(default off)
+			global
+			{not in Vi}
+			{not available when compiled without the
+			|+extra_search| feature}
+	When there is a previous search pattern, highlight all its matches.
+	The type of highlighting used can be set with the 'l' occasion in the
+	'highlight' option.  This uses the "Search" highlight group by
+	default.  Note that only the matching text is highlighted, any offsets
+	are not applied.
+	See also: 'incsearch' and |:match|.
+	When you get bored looking at the highlighted matches, you can turn it
+	off with |:nohlsearch|.  This does not change the option value, as
+	soon as you use a search command, the highlighting comes back.
+	'redrawtime' specifies the maximum time spent on finding matches.
+	When the search pattern can match an end-of-line, Vim will try to
+	highlight all of the matched text.  However, this depends on where the
+	search starts.  This will be the first line in the window or the first
+	line below a closed fold.  A match in a previous line which is not
+	drawn may not continue in a newly drawn line.
+	You can specify whether the highlight status is restored on startup
+	with the 'h' flag in 'viminfo' |viminfo-h|.
 	NOTE: This option is reset when 'compatible' is set.
 
 						*'icon'* *'noicon'*
@@ -4384,7 +4433,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	Error messages will be suppressed, unless the 'debug' option contains
 	"msg".
 	See |indent-expression|.
-	NOTE: This option is made empty when 'compatible' is set.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.
@@ -4959,6 +5008,25 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
+					*'makeencoding'* *'menc'*
+'makeencoding' 'menc'	string	(default "")
+			global or local to buffer |global-local|
+			{only available when compiled with the |+multi_byte|
+			feature}
+			{not in Vi}
+	Encoding used for reading the output of external commands.  When empty,
+	encoding is not converted.
+	This is used for `:make`, `:lmake`, `:grep`, `:lgrep`, `:grepadd`,
+	`:lgrepadd`, `:cfile`, `:cgetfile`, `:caddfile`, `:lfile`, `:lgetfile`,
+	and `:laddfile`.
+
+	This would be mostly useful when you use MS-Windows and set 'encoding'
+	to "utf-8".  If |+iconv| is enabled and GNU libiconv is used, setting
+	'makeencoding' to "char" has the same effect as setting to the system
+	locale encoding.  Example: >
+		:set encoding=utf-8
+		:set makeencoding=char	" system locale is used
+<
 						*'makeprg'* *'mp'*
 'makeprg' 'mp'		string	(default "make", VMS: "MMS")
 			global or local to buffer |global-local|
@@ -5356,6 +5424,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			feature}
 	The number of milliseconds between polls for MzScheme threads.
 	Negative or zero value means no thread scheduling.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 							*'nrformats'* *'nf'*
 'nrformats' 'nf'	string	(default "bin,octal,hex",
@@ -5421,7 +5491,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	is set. Thus with the Vim default of 4 there is room for a line number
 	up to 999. When the buffer has 1000 lines five columns will be used.
 	The minimum value is 1, the maximum value is 10.
-	NOTE: 'numberwidth' is reset to 8 when 'compatible' is set.
+	NOTE: This option is set to the Vi default value when 'compatible' is
+	set and to the Vim default value when 'compatible' is reset.
 
 						*'omnifunc'* *'ofu'*
 'omnifunc' 'ofu'	string	(default: empty)
@@ -5661,7 +5732,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	a Tab.
 	NOTE: When using ">>" multiple times the resulting indent is a mix of
 	tabs and spaces.  You might not like this.
-	NOTE: 'preserveindent' is reset when 'compatible' is set.
+	NOTE: This option is reset when 'compatible' is set.
 	Also see 'copyindent'.
 	Use |:retab| to clean up white space.
 
@@ -6399,9 +6470,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 	"-f" is not inside the quotes, because it is not part of the command
 	name.  And Vim automagically recognizes the backslashes that are path
 	separators.
-	For Dos 32 bits (DJGPP), you can set the $DJSYSFLAGS environment
-	variable to change the way external commands are executed.  See the
-	libc.inf file of DJGPP.
 	Under MS-Windows, when the executable ends in ".com" it must be
 	included.  Thus setting the shell to "command.com" or "4dos.com"
 	works, but "command" and "4dos" do not work for all commands (e.g.,
@@ -6541,6 +6609,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'shelltemp' is off.
 	The `system()` function does not respect this option and always uses
 	temp files.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 						*'shelltype'* *'st'*
 'shelltype' 'st'	number	(default 0)
@@ -6857,7 +6927,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	mapping: ":inoremap # X^H#", where ^H is entered with CTRL-V CTRL-H.
 	When using the ">>" command, lines starting with '#' are not shifted
 	right.
-	NOTE: 'smartindent' is reset when 'compatible' is set.
+	NOTE: This option is reset when 'compatible' is set.
 	This option is reset when 'paste' is set and restored when 'paste' is
 	reset.
 
@@ -7045,7 +7115,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			word.  The expression must evaluate to a List of
 			Lists, each with a suggestion and a score.
 			Example:
-				[['the', 33], ['that', 44]]
+				[['the', 33], ['that', 44]] ~
 			Set 'verbose' and use |z=| to see the scores that the
 			internal methods use.  A lower score is better.
 			This may invoke |spellsuggest()| if you temporarily
@@ -7512,6 +7582,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   ignore	Ignore case
 	   match	Match case
 	   smart	Ignore case unless an upper case letter is used
+	NOTE: This option is set to the Vi default value when 'compatible' is
+	set and to the Vim default value when 'compatible' is reset.
 
 						*'taglength'* *'tl'*
 'taglength' 'tl'	number	(default 0)
@@ -7658,6 +7730,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	compatible terminal.
 	If setting this option does not work (produces a colorless UI)
 	reading |xterm-true-color| might help.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'terse'* *'noterse'*
 'terse'			boolean	(default off)
@@ -8068,6 +8141,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The undo file is not read when 'undoreload' causes the buffer from
 	before a reload to be saved for undo.
 	When 'undofile' is turned off the undo file is NOT deleted.
+	NOTE: This option is reset when 'compatible' is set.
 
 						*'undolevels'* *'ul'*
 'undolevels' 'ul'	number	(default 100, 1000 for Unix, VMS,
@@ -8323,6 +8397,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
+	NOTE: This option is set to the Vim default value when 'compatible'
+	is reset.
 
 					    *'virtualedit'* *'ve'*
 'virtualedit' 've'	string	(default "")
@@ -8351,6 +8427,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The `g$` command will move to the end of the screen line.
 	It doesn't make sense to combine "all" with "onemore", but you will
 	not get a warning for it.
+	NOTE: This option is set to "" when 'compatible' is set.
 
 			*'visualbell'* *'vb'* *'novisualbell'* *'novb'* *beep*
 'visualbell' 'vb'	boolean	(default off)

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 8.0.  Last change: 2016 Sep 11
+*pattern.txt*   For Vim version 8.0.  Last change: 2017 Mar 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -869,10 +869,13 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%V	Match inside the Visual area.  When Visual mode has already been
 	stopped match in the area that |gv| would reselect.
 	This is a |/zero-width| match.  To make sure the whole pattern is
-	inside the Visual area put it at the start and end of the pattern,
+	inside the Visual area put it at the start and just before the end of
-	e.g.: >
+	the pattern, e.g.: >
+		/\%Vfoo.*ba\%Vr
+<	This also works if only "foo bar" was Visually selected. This: >
 		/\%Vfoo.*bar\%V
-<	Only works for the current buffer.
+<	would match "foo bar" if the Visual selection continues after the "r".
+	Only works for the current buffer.
 
 						*/\%#* *cursor-position*
 \%#	Matches with the cursor position.  Only works when matching in a

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 8.0.  Last change: 2016 Nov 04
+*quickfix.txt*  For Vim version 8.0.  Last change: 2017 Mar 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -45,10 +45,13 @@ The 'errorformat' option should be set to match the error messages from your
 compiler (see |errorformat| below).
 
 						*location-list* *E776*
-A location list is similar to a quickfix list and contains a list of positions
+A location list is a window-local quickfix list. You get one after commands
-in files.  A location list is associated with a window and each window can
+like `:lvimgrep`, `:lgrep`, `:lhelpgrep`, `:lmake`, etc., which create a
-have a separate location list.  A location list can be associated with only
+location list instead of a quickfix list as the corresponding `:vimgrep`,
-one window.  The location list is independent of the quickfix list.
+`:grep`, `:helpgrep`, `:make` do.
+A location list is associated with a window and each window can have a
+separate location list.  A location list can be associated with only one
+window.  The location list is independent of the quickfix list.
 
 When a window with a location list is split, the new window gets a copy of the
 location list.  When there are no longer any references to a location list,
@@ -164,6 +167,9 @@ processing a quickfix or location list command, it will be aborted.
 			keep Vim running while compiling.  If you give the
 			name of the errorfile, the 'errorfile' option will
 			be set to [errorfile].  See |:cc| for [!].
+			If the encoding of the error file differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							*:lf* *:lfile*
 :lf[ile][!] [errorfile]	Same as ":cfile", except the location list for the
@@ -175,6 +181,9 @@ processing a quickfix or location list command, it will be aborted.
 :cg[etfile] [errorfile]					*:cg* *:cgetfile*
 			Read the error file.  Just like ":cfile" but don't
 			jump to the first error.
+			If the encoding of the error file differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 
 :lg[etfile] [errorfile]					*:lg* *:lgetfile*
@@ -185,6 +194,9 @@ processing a quickfix or location list command, it will be aborted.
 :caddf[ile] [errorfile]	Read the error file and add the errors from the
 			errorfile to the current quickfix list. If a quickfix
 			list is not present, then a new list is created.
+			If the encoding of the error file differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							*:laddf* *:laddfile*
 :laddf[ile] [errorfile]	Same as ":caddfile", except the location list for the
@@ -320,6 +332,7 @@ use this code: >
 	endfunction
 
 	au QuickfixCmdPost make call QfMakeConv()
+Another option is using 'makeencoding'.
 
 
 EXECUTE A COMMAND IN ALL THE BUFFERS IN QUICKFIX OR LOCATION LIST:
@@ -586,6 +599,9 @@ lists, use ":cnewer 99" first.
 			   like |:cnext| and |:cprevious|, see above.
 			This command does not accept a comment, any "
 			characters are considered part of the arguments.
+			If the encoding of the program output differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							*:lmak* *:lmake*
 :lmak[e][!] [arguments]
@@ -645,6 +661,7 @@ read the error messages: >
 	au QuickfixCmdPost make call QfMakeConv()
 
 (Example by Faque Cheng)
+Another option is using 'makeencoding'.
 
 ==============================================================================
 5. Using :vimgrep and :grep				*grep* *lid*
@@ -759,6 +776,9 @@ id-utils) in a similar way to its compiler integration (see |:make| above).
 			When 'grepprg' is "internal" this works like
 			|:vimgrep|.  Note that the pattern needs to be
 			enclosed in separator characters then.
+			If the encoding of the program output differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
 
 							    *:lgr* *:lgrep*
 :lgr[ep][!] [arguments]	Same as ":grep", except the location list for the
@@ -783,6 +803,10 @@ id-utils) in a similar way to its compiler integration (see |:make| above).
 				  \ | catch /E480:/
 				  \ | endtry"
 <
+			If the encoding of the program output differs from the
+			'encoding' option, you can use the 'makeencoding'
+			option to specify the encoding.
+
 							*:lgrepa* *:lgrepadd*
 :lgrepa[dd][!] [arguments]
 			Same as ":grepadd", except the location list for the
@@ -1399,7 +1423,7 @@ prints information about entering a directory in the form "Making all in dir".
    Making all in dir2		  ./dir1/dir2
 
    This can be solved by printing absolute directories in the "enter directory"
-   message or by printing "leave directory" messages..
+   message or by printing "leave directory" messages.
 
 To avoid this problem, ensure to print absolute directory names and "leave
 directory" messages.

runtime/doc/quickref.txt

@@ -782,6 +782,7 @@ Short explanation of each option:		*option-list*
 'macatsui'		    Mac GUI: use ATSUI text drawing
 'magic'			    changes special characters in search patterns
 'makeef'	  'mef'     name of the errorfile for ":make"
+'makeencoding'	  'menc'    encoding of external make/grep commands
 'makeprg'	  'mp'	    program to use for the ":make" command
 'matchpairs'	  'mps'     pairs of characters that "%" can match
 'matchtime'	  'mat'     tenths of a second to show matching paren

runtime/doc/scroll.txt

@@ -221,7 +221,7 @@ past its buffer's limits.
 However, if a 'scrollbind' window that has a relative offset that is past its
 buffer's limits is given the cursor focus, the other 'scrollbind' windows must
 jump to a location where the current window's relative offset is valid.  This
-behavior can be changed by clearing the 'jump' flag from the 'scrollopt'
+behavior can be changed by clearing the "jump" flag from the 'scrollopt'
 option.
 
 						*syncbind* *:syncbind* *:sync*

runtime/doc/syntax.txt

@@ -2646,9 +2646,9 @@ later, and part earlier) adds.
 
 RESTRUCTURED TEXT			*rst.vim* *ft-rst-syntax*
 
-You may set what syntax definitions should be used for code blocks via
+You may set what syntax definitions should be used for code blocks via >
 	let rst_syntax_code_list = ['vim', 'lisp', ...]
-
+<
 
 REXX						*rexx.vim* *ft-rexx-syntax*
 

runtime/doc/tags

@@ -427,6 +427,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'macatsui'	options.txt	/*'macatsui'*
 'magic'	options.txt	/*'magic'*
 'makeef'	options.txt	/*'makeef'*
+'makeencoding'	options.txt	/*'makeencoding'*
 'makeprg'	options.txt	/*'makeprg'*
 'mat'	options.txt	/*'mat'*
 'matchpairs'	options.txt	/*'matchpairs'*
@@ -439,6 +440,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'maxmemtot'	options.txt	/*'maxmemtot'*
 'mco'	options.txt	/*'mco'*
 'mef'	options.txt	/*'mef'*
+'menc'	options.txt	/*'menc'*
 'menuitems'	options.txt	/*'menuitems'*
 'mesg'	vi_diff.txt	/*'mesg'*
 'mfd'	options.txt	/*'mfd'*
@@ -965,6 +967,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 't_KJ'	term.txt	/*'t_KJ'*
 't_KK'	term.txt	/*'t_KK'*
 't_KL'	term.txt	/*'t_KL'*
+'t_PE'	term.txt	/*'t_PE'*
+'t_PS'	term.txt	/*'t_PS'*
 't_RB'	term.txt	/*'t_RB'*
 't_RI'	term.txt	/*'t_RI'*
 't_RV'	term.txt	/*'t_RV'*
@@ -4500,6 +4504,7 @@ E937	autocmd.txt	/*E937*
 E938	eval.txt	/*E938*
 E939	change.txt	/*E939*
 E94	windows.txt	/*E94*
+E940	eval.txt	/*E940*
 E95	message.txt	/*E95*
 E96	diff.txt	/*E96*
 E97	diff.txt	/*E97*
@@ -5071,6 +5076,7 @@ backup-changed	version4.txt	/*backup-changed*
 backup-extension	version4.txt	/*backup-extension*
 backup-table	editing.txt	/*backup-table*
 balloon-eval	debugger.txt	/*balloon-eval*
+balloon_show()	eval.txt	/*balloon_show()*
 bar	motion.txt	/*bar*
 bars	help.txt	/*bars*
 base_font_name_list	mbyte.txt	/*base_font_name_list*
@@ -5344,6 +5350,7 @@ cino-:	indent.txt	/*cino-:*
 cino-=	indent.txt	/*cino-=*
 cino->	indent.txt	/*cino->*
 cino-C	indent.txt	/*cino-C*
+cino-E	indent.txt	/*cino-E*
 cino-J	indent.txt	/*cino-J*
 cino-L	indent.txt	/*cino-L*
 cino-M	indent.txt	/*cino-M*
@@ -7883,6 +7890,7 @@ python-bindeval	if_pyth.txt	/*python-bindeval*
 python-bindeval-objects	if_pyth.txt	/*python-bindeval-objects*
 python-buffer	if_pyth.txt	/*python-buffer*
 python-buffers	if_pyth.txt	/*python-buffers*
+python-building	if_pyth.txt	/*python-building*
 python-chdir	if_pyth.txt	/*python-chdir*
 python-command	if_pyth.txt	/*python-command*
 python-commands	if_pyth.txt	/*python-commands*
@@ -8732,20 +8740,23 @@ termcap-options	term.txt	/*termcap-options*
 termcap-title	term.txt	/*termcap-title*
 terminal-colors	os_unix.txt	/*terminal-colors*
 terminal-info	term.txt	/*terminal-info*
+terminal-key-codes	term.txt	/*terminal-key-codes*
 terminal-options	term.txt	/*terminal-options*
+terminal-output-codes	term.txt	/*terminal-output-codes*
 terminfo	term.txt	/*terminfo*
 termresponse-variable	eval.txt	/*termresponse-variable*
 test-functions	usr_41.txt	/*test-functions*
 test_alloc_fail()	eval.txt	/*test_alloc_fail()*
 test_autochdir()	eval.txt	/*test_autochdir()*
-test_disable_char_avail()	eval.txt	/*test_disable_char_avail()*
 test_garbagecollect_now()	eval.txt	/*test_garbagecollect_now()*
+test_ignore_error()	eval.txt	/*test_ignore_error()*
 test_null_channel()	eval.txt	/*test_null_channel()*
 test_null_dict()	eval.txt	/*test_null_dict()*
 test_null_job()	eval.txt	/*test_null_job()*
 test_null_list()	eval.txt	/*test_null_list()*
 test_null_partial()	eval.txt	/*test_null_partial()*
 test_null_string()	eval.txt	/*test_null_string()*
+test_override()	eval.txt	/*test_override()*
 test_settime()	eval.txt	/*test_settime()*
 testing	eval.txt	/*testing*
 testing-variable	eval.txt	/*testing-variable*

runtime/doc/term.txt

@@ -252,7 +252,7 @@ But any non-empty string means that the flag is set.  An empty string means
 that the flag is not set.  't_CS' works like this too, but it isn't a termcap
 flag.
 
-OUTPUT CODES
+OUTPUT CODES						*terminal-output-codes*
 	option	meaning	~
 
 	t_AB	set background color (ANSI)			*t_AB* *'t_AB'*
@@ -333,7 +333,7 @@ Added by Vim (there are no standard codes for these):
 	t_BD	disable bracketed paste mode			*t_BD* *'t_BD'*
 		|xterm-bracketed-paste|
 
-KEY CODES
+KEY CODES						*terminal-key-codes*
 Note: Use the <> form if possible
 
 	option	name		meaning	~
@@ -424,8 +424,9 @@ Note: Use the <> form if possible
 	t_KK	<k8>		keypad 8		 *<k8>*	*t_KK* *'t_KK'*
 	t_KL	<k9>		keypad 9		 *<k9>*	*t_KL* *'t_KL'*
 		<Mouse>		leader of mouse code		*<Mouse>*
-	t_PS	start of bracketed paste |xterm-bracketed-paste|  *t_PS* 't_PS'
+								*t_PS* *'t_PS'*
-	t_PE	end of bracketed paste |xterm-bracketed-paste|    *t_PE* 't_PE'
+	t_PS	start of bracketed paste |xterm-bracketed-paste|
+	t_PE	end of bracketed paste |xterm-bracketed-paste|  *t_PE* *'t_PE'*
 
 Note about t_so and t_mr: When the termcap entry "so" is not present the
 entry for "mr" is used.  And vice versa.  The same is done for "se" and "me".

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.0.  Last change: 2017 Feb 17
+*todo.txt*      For Vim version 8.0.  Last change: 2017 Mar 16
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -35,16 +35,11 @@ entered there will not be repeated below, unless there is extra information.
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-Patch 195 introduced a regression in tag priority. (Charles Campbell, 2017 Feb
+Using "g<" after ":for x in [1,2,3]|echom x|endfor" looks wrong. (Marcin
-10)
+Szamotulski, 2017 Mar 12)
+Also, using Ctrl-C clears the last part.
 
-Memory leak in test97?
+Test 45 fails on MS-Windows only before resetting 'sw'. Why?
-
-exists('&t_k1') returns false even when t_k1 was set.
-Use in test_assign.vim to only get value of &t_k1 if it exists. #1459
-
-test_gui fails with Athena:
-   Caught exception in Test_1_set_secure(): Vim(gui):E285: Failed to create input context @ function RunTheTest[21]..Test_1_set_secure, line 2
 
 +channel:
 - Try out background make plugin: 
@@ -116,6 +111,19 @@ Regexp problems:
 - Difference between two engines: ".*\zs\/\@>\/" on text "///"
   (Chris Paul, 2016 Nov 13)  New engine not greedy enough?
 
+Running test_gui and test_gui_init with Motif sometimes kills the window
+manager.  Problem with Motif?
+
+Memory leak in test97?  The string is actually freed.  Weird.
+
+Include rust files.  Got all permissions?
+
+dict_add_list and dict_add_dict may free item when failing. (2017 Mar 12,
+Nikolai Pavlov, #1555)
+
+Patch to add buffer name argument to taglist().
+Ordering of tags in result of taglist call. (Duncan McDougall, #1194)
+
 Add a toolbar in the terminal.  Can be global, above all windows, or specific
 for one window.
 Use tb_set(winid, [{'text': 'stop', 'cb': callback, 'hi': 'Green'}])
@@ -127,79 +135,49 @@ What if there is an invalid character?
 
 Json string with trailing \u should be an error. (Lcd)
 
-Patch for double free setting 'ttytype' (Dominique, 2017 Feb 10, #1461)
+On MS-Windows with 'clipboard' set to "unnamed" this doesn't work to double
-
+lines: :g/^/normal yyp   On Unix it works OK.  (Bryce Orgill, 2016 Nov 5)
-Patch for using uninitialized memory (Dominique, 2017 Feb 11, #1464)
+Another example 2017 Mar 10.
-
-Patch for crash setting 'guicursor'. (Dominique, 2017 Feb 11, #1465)
 
 Multi-byte bug: dv} splits char. (Urtica Dioica, 2017 Jan 9)
 
-Patch to add test for 'number' and 'relativenumber'. (Ozaki Kiichi, #1447)
-Now merged in test89 (Feb 12)
-
-Patch to fix tabline redraw. (Christian Brabandt, 2017 Feb 10)
-Better way to fix this?
-
 When session file has name in argument list but the buffer was deleted, the
 buffer is not deleted when using the session file. (#1393)
 Should add the buffer in hidden state.
 
-Patch to change VimL to "Vim script". (Hirohito Higashi, 2017 Feb 14)
-
-Invalid memory access with :normal command. (Dominique Pelle, 2017 Feb 14)
-
-When "gf" excludes following ":99", jump to line 99.
-Also when editing a file foo.txt:99 ?
-
 When an item in the quickfix list has a file name that does not exist, behave
 like the item was not a match for :cnext.
 
-Patch for warning about integer overflow in undo.c (King, 2017 Feb 12)
+Patch to test regexp classes. (Dominique, 2017 Mar 13, #1560)
-And another similar one.
+Do we need to adjust the implementation?
-
+Make different classes that depend on the system and that don't.
-Patch for null pointer use in undo.c (King, 2017 Feb 12)
-
-Patch to avoid using CTRL-O when do_cmdline_cmd is called. (James McCoy, 2017
-Feb 7, #1453)
-
-Patch for multi-byte line wrap. (Ozaki Kiichi, 2017 Feb 7, #1456)
-
-Patch to show balloon with a function. (Jusufadis Bakamovic, #1449)
 
 Wrong diff highlighting with three files. (2016 Oct 20, #1186)
 Also get E749 on exit.
 Another example in #1309
 
+Patch to change all use of &sw to shiftwidth(). (Tyru, 2017 Feb 19)
+Wait until maintainers integrate it.
+
 Completion for user-defined commands does not work if a few characters were
 already typed. (Dominique, 2017 Jan 26)
 
-Patch for nsis script to add a dll file. (Christian Brabandt, 2017 Feb 10)
-Also include the .dll file?
-
-Patch for capitalizations in menus. (Zhen-Huan Hu, 2017 Feb 9)
-
 When deleting a mark or register, leave a tombstone, so that it's also deleted
 when writing viminfo (and the delete was the most recent action). #1339
 
-Patch for better explanation of 'compatible' side effects.
-https://github.com/vim/vim/pull/1161/files
-
-Patch to add 'makeencoding', useful when the system encoding differs from
-Vim's 'encoding' setting. (Ken Takata, 2017 Jan 31)
-
-Patch to adjust marks when adding a new line to the end of buffer in diff
-mode. (James McCoy, 2016 Dec 14, #1329)
-
 Suggestion to improve pt-br spell checking. (Marcelo D Montu, 2016 Dec 15,
 #1330)
 
 Error in test_startup_utf8 on Solaris. (Danek Duvall, 2016 Aug 17)
 
-Patch to fix that test87 fails on Arch Linux. (Jesin, 2017 Feb 10)
-
 Completion for :!cmd shows each match twice. #1435
 
+GTK: When adding a timer from 'balloonexpr' it won't fire, because
+g_main_context_iteration() doesn't return.  Need to trigger an event when the
+timer expires.
+
+Screen update bug related to matchparen.  (Chris Heath, 2017 Mar 4, #1532)
+
 Rule to use "^" for statusline does not work if a space is defined with
 highlighting for both stl and stlnc.  Patch by Ken Hamada (itchyny, 2016 Dec 11)
 
@@ -209,14 +187,18 @@ highlighting for both stl and stlnc.  Patch by Ken Hamada (itchyny, 2016 Dec 11)
 Using CTRL-G_U in InsertCharPre causes trouble for redo. (Israel Chauca
 Fuentes, 2017 Feb 12, #1470)
 
+Check for errors E704 and E705 only does VAR_FUNC, should also do VAR_PARTIAL.
+(Nikolai Pavlov, 2017 Mar 13, #1557)
+Make a function to check for function-like type?
+
 Screen updated delayed when using CTRL-O u in Insert mode.
 (Barlik, #1191)  Perhaps because status message?
 
-Patch to add buffer name argument to taglist().
+Implement optional arguments for functions.
-Ordering of tags in result of taglist call. (Duncan McDougall, #1194)
+    func Foo(start, count = 1 all = 1)
-
+    call Foo(12)
-Patch to fix that b_ind_has_comment is not correctly reset. (Christian
+    call Foo(12, all = 0)
-Brabandt, 2017 Feb 14, closes #1475)
+    call Foo(12, 15, 0)
 
 writefile() does not abort as soon as an error is found. (Nikolai Pavlov,
 2017 Feb 14, #1476)
@@ -255,24 +237,30 @@ MS-Windows.  Perhaps in \#  the \ is seen as a path separator. (Axel Bender,
 2017 Feb 9)  Can we expand wildcards first and send the path literally to the
 receiving Vim?  Or make an exception for #, it's not useful remotely.
 
+":sbr" docs state it respect 'switchbuf', but "vsplit" does not cause a
+vertical split. (Haldean Brown, 2017 Mar 1)
+
 Use ADDR_OTHER instead of ADDR_LINES for many more commands.
 Add tests for using number larger than number of lines in buffer.
 
+Might be useful to have isreadonly(), like we have islocked().
+Avoids exceptions, e.g. when using the b: namespace as a dict.
+
 Patch to make v:shell_error writable. (Christian Brabandt, 2016 Sep 27)
 Useful to restore it.  Is there another solution?
 
 "ci[" does not look for next [ like ci" does look for next ".
 (J.F. 2017 Jan 7)
 
-On MS-Windows with 'clipboard' set to "unnamed" this doesn't work to double
-lines: :g/^/normal yyp   On Unix it works OK.  (Bryce Orgill, 2016 Nov 5)
-
 Patch for wrong cursor position on wrapped line, involving breakindent.
 (Ozaki Kiichi, 2016 Nov 25)
 Does this also fix #1408 ?
 
 Patch for 'cursorlinenr' option. (Ozaki Kiichi, 2016 Nov 30)
 
+Window resizing with 'winfixheight': With a vertical split the height changes
+anyway. (Tommy allen, 2017 Feb 21, #1502)
+
 When adding an item to a new quickfix list make ":cnext" jump to that item.
 Make a difference being at the first item and not having used :cnext at all.
 (Afanasiy Fet, 2017 Jan 3)
@@ -285,9 +273,6 @@ Patch to make it possible to extend a list with itself.
 
 Patch to add Zstandard compressed file support. (Nick Terrell, 2016 Oct 24)
 
-Patch to add new regexp classes :ident:, :keyword:, :fname:.
-(ichizok, 2016 Jan 12, #1373)
-
 Patch to add trim() function. (Bukn, 2016 Nov 25, #1280)
 
 Patch to add MODIFIED_BY to MSVC build file. (Chen Lei, 2016 Nov 24, #1275)
@@ -461,6 +446,9 @@ Add stronger encryption.  Could use libsodium (NaCl).
 https://github.com/jedisct1/libsodium/
 Possibly include the needed code so that it can be build everywhere.
 
+Add a way to restart a timer.  It's similar to timer_stop() and timer_start(),
+but the reference remains valid.
+
 Patch to add setbufline(). (email from Yasuhiro Matsumoto, patch by Ozaki
 Kiichi, 2016 Feb 28)
 Update Mar 8: https://gist.github.com/mattn/23c1f50999084992ca98
@@ -1082,6 +1070,9 @@ Patch for :tabcloseleft, after closing a tab go to left tab. (William Bowers,
 Patch to improve equivalence classes in regexp patterns.
 (Christian Brabandt, 2013 Jan 16, update Jan 17)
 
+Patch to add new regexp classes :ident:, :keyword:, :fname:.
+(ichizok, 2016 Jan 12, #1373)
+
 Patch with suggestions for starting.txt. (Tony Mechelynck, 2012 Oct 24)
 But use Gnome instead of GTK?
 

runtime/doc/usr_02.txt

@@ -1,4 +1,4 @@
-*usr_02.txt*	For Vim version 8.0.  Last change: 2016 Jan 16
+*usr_02.txt*	For Vim version 8.0.  Last change: 2017 Mar 14
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -554,7 +554,7 @@ Summary: 					*help-summary*  >
 8) Ex-commands always start with ":", so to go to the :s command help: >
 	:help :s
 
-9) Commands specifically for debugging start with ">".  To go to to the help
+9) Commands specifically for debugging start with ">".  To go to the help
    for the "cont" debug command: >
 	:help >cont
 
@@ -663,7 +663,7 @@ Summary: 					*help-summary*  >
 22) Autocommand events can be found by their name: >
      	:help BufWinLeave
 <    To see all possible events: >
-	:help autocommands-events
+	:help autocommand-events
 
 23) Command-line switches always start with "-".  So for the help of the -f
     command switch of Vim use: >

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 8.0.  Last change: 2016 Nov 29
+*usr_41.txt*	For Vim version 8.0.  Last change: 2017 Mar 09
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -95,7 +95,7 @@ Then there is the ":let i += 1" command.  This does the same thing as
 to the same variable.
 
 The example was given to explain the commands, but would you really want to
-make such a loop it can be written much more compact: >
+make such a loop, it can be written much more compact: >
 
 	:for i in range(1, 4)
 	:  echo "count is" i
@@ -693,6 +693,7 @@ Other computation:					*bitwise-function*
 Variables:						*var-functions*
 	type()			type of a variable
 	islocked()		check if a variable is locked
+	funcref()		get a Funcref for a function reference
 	function()		get a Funcref for a function name
 	getbufvar()		get a variable value from a specific buffer
 	setbufvar()		set a variable in a specific buffer
@@ -884,6 +885,7 @@ GUI:						*gui-functions*
 	getfontname()		get name of current font being used
 	getwinposx()		X position of the GUI Vim window
 	getwinposy()		Y position of the GUI Vim window
+	balloon_show()		set the balloon content
 
 Vim server:					*server-functions*
 	serverlist()		return the list of server names
@@ -920,14 +922,16 @@ Testing:				    *test-functions*
 	assert_fails()		assert that a function call fails
 	test_alloc_fail()	make memory allocation fail
 	test_autochdir()	enable 'autochdir' during startup
-	test_disable_char_avail()	test without typeahead
+	test_override()		test with Vim internal overrides
-	test_garbagecollect_now()	free memory right now
+	test_garbagecollect_now()   free memory right now
+	test_ignore_error()	ignore a specific error message
 	test_null_channel()	return a null Channel
 	test_null_dict()	return a null Dict
 	test_null_job()		return a null Job
 	test_null_list()	return a null List
 	test_null_partial()	return a null Partial function
 	test_null_string()	return a null String
+	test_settime()		set the time Vim uses internally
 
 Inter-process communication:		    *channel-functions*
 	ch_canread()		check if there is something to read
@@ -1588,7 +1592,7 @@ WHITE SPACE
 Blank lines are allowed and ignored.
 
 Leading whitespace characters (blanks and TABs) are always ignored.  The
-whitespaces between parameters (e.g. between the 'set' and the 'cpoptions' in
+whitespaces between parameters (e.g. between the "set" and the "cpoptions" in
 the example below) are reduced to one blank character and plays the role of a
 separator, the whitespaces after the last (visible) character may or may not
 be ignored depending on the situation, see below.

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 8.0.  Last change: 2016 Sep 06
+*various.txt*   For Vim version 8.0.  Last change: 2017 Feb 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -527,12 +527,14 @@ N  *+X11*		Unix only: can restore window title |X11|
 :redi[r] END		End redirecting messages.  {not in Vi}
 
 							*:filt* *:filter*
-:filt[er] {pat} {command}
+:filt[er][!] {pat} {command}
-:filt[er] /{pat}/ {command}
+:filt[er][!] /{pat}/ {command}
-			Restrict the output of {command} to matches with {pat}.
+			Restrict the output of {command} to lines matching
-			For example, to list only xml files: >
+			with {pat}.  For example, to list only xml files: >
 				:filter /\.xml$/ oldfiles
-<
+<			If the [!] is given, restrict the output of {command}
+			to lines that do NOT match {pat}.
+
 			{pat} is a Vim search pattern.  Instead of enclosing
 			it in / any non-ID character (see |'isident'|) can be
 			used, so long as it does not appear in {pat}.  Without
@@ -634,7 +636,7 @@ K			Run a program to lookup the keyword under the
 			with the command >
 				:!{program} {keyword}
 <			There is an example of a program to use in the tools
-			directory of Vim.  It is called 'ref' and does a
+			directory of Vim.  It is called "ref" and does a
 			simple spelling check.
 			Special cases:
 			- If 'keywordprg' begins with ":" it is invoked as

runtime/doc/version8.txt

@@ -1,4 +1,4 @@
-*version8.txt*  For Vim version 8.0.  Last change: 2017 Jan 15
+*version8.txt*  For Vim version 8.0.  Last change: 2017 Mar 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -200,9 +200,9 @@ Options: ~
 'perldll'		name of the Perl dynamic library
 'pythondll'		name of the Python 2 dynamic library
 'pythonthreedll'	name of the Python 3 dynamic library
-'signcolumn'		when to display the sign column
 'renderoptions'		options for text rendering on Windows
 'rubydll'		name of the Ruby dynamic library
+'signcolumn'		when to display the sign column
 'tagcase'		how to handle case when searching in tags files
 'tcldll'		name of the Tcl dynamic library
 'termguicolors'		use GUI colors for the terminal
@@ -296,7 +296,7 @@ New and extended functions: ~
 |systemlist()|		get the result of a shell command as a list
 |test_alloc_fail()|	make memory allocation fail
 |test_autochdir()|	test 'autochdir' functionality
-|test_disable_char_avail()| test without typeahead
+test_disable_char_avail() test without typeahead (removed later)
 |test_garbagecollect_now()| free memory right now
 |test_null_channel()|	return a null Channel
 |test_null_dict()|	return a null Dict
@@ -426,7 +426,7 @@ When no vimrc file is found, the |defaults.vim| script is loaded to set more
 useful default values for new users.  That includes setting 'nocompatible'.
 Thus Vim no longer starts up in Vi compatible mode.  If you do want that,
 either create a .vimrc file that does "set compatible" or start Vim with
-"Vim -C".
+"vim -C".
 
 
 Support removed ~
@@ -1866,7 +1866,7 @@ Files:	    runtime/doc/eval.txt, src/eval.c, src/testdir/test60.in,
 	    src/testdir/test60.ok
 
 Patch 7.4.237 (after 7.4.236)
-Problem:    When some patches was not included has("patch-7.4.123") may return
+Problem:    When some patches were not included has("patch-7.4.123") may return
 	    true falsely.
 Solution:   Check for the specific patch number.
 Files:	    runtime/doc/eval.txt, src/eval.c
@@ -3436,7 +3436,7 @@ Files:	    runtime/doc/options.txt, src/Makefile, src/regexp.c, src/regexp.h,
 Patch 7.4.498 (after 7.4.497)
 Problem:    Typo in DOS makefile.
 Solution:   Change exists to exist. (Ken Takata)
-Files:	    src/testdirMake_dos.mak
+Files:	    src/testdir/Make_dos.mak
 
 Patch 7.4.499
 Problem:    substitute() can be slow with long strings.

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Jan 06
+" Last Change:	2017 Mar 13
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -1366,6 +1366,9 @@ endfunc
 " Not Quite C
 au BufNewFile,BufRead *.nqc			setf nqc
 
+" NSE - Nmap Script Engine - uses Lua syntax
+au BufNewFile,BufRead *.nse			setf lua
+
 " NSIS
 au BufNewFile,BufRead *.nsi,*.nsh		setf nsis
 
@@ -2280,6 +2283,9 @@ au BufNewFile,BufRead .tidyrc,tidyrc		setf tidy
 " TF mud client
 au BufNewFile,BufRead *.tf,.tfrc,tfrc		setf tf
 
+" tmux configuration
+au BufNewFile,BufRead {.,}tmux*.conf		setf tmux
+
 " TPP - Text Presentation Program
 au BufNewFile,BufReadPost *.tpp			setf tpp
 

runtime/ftplugin/a2ps.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         a2ps(1) configuration file
+" Language:             a2ps(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/alsaconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         alsaconf(8) configuration file
+" Language:             alsaconf(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/arch.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         GNU Arch inventory file
+" Language:             GNU Arch inventory file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/automake.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Automake
+" Language:             Automake
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/bdf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         BDF font definition
+" Language:             BDF font definition
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/calendar.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         calendar(1) input file
+" Language:             calendar(1) input file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/cdrdaoconf.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2007-12-04
+" Latest Revision:      2007-12-04
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/conf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         generic configuration file
+" Language:             generic configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/crm.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         CRM114
+" Language:             CRM114
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/css.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         CSS
+" Language:             CSS
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/cvsrc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         cvs(1) RC file
+" Language:             cvs(1) RC file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/denyhosts.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2007-12-04
+" Latest Revision:      2007-12-04
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dictconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         dict(1) configuration file
+" Language:             dict(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dictdconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         dictd(8) configuration file
+" Language:             dictd(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dircolors.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         dircolors(1) input file
+" Language:             dircolors(1) input file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/dosini.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Configuration File (ini file) for MSDOS/MS Windows
+" Language:             Configuration File (ini file) for MSDOS/MS Windows
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/elinks.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         elinks(1) configuration file
+" Language:             elinks(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/eterm.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         eterm(1) configuration file
+" Language:             eterm(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/fetchmail.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         fetchmail(1) RC File
+" Language:             fetchmail(1) RC File
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/framescript.vim

@@ -1,7 +1,7 @@
 " Vim ftplugin file
-" Language:         FrameScript
+" Language:             FrameScript
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-19
+" Latest Revision:      2008-07-19
 
 let s:cpo_save = &cpo
 set cpo&vim

runtime/ftplugin/gpg.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         gpg(1) configuration file
+" Language:             gpg(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/group.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         group(5) user group file
+" Language:             group(5) user group file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/grub.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         grub(8) configuration file
+" Language:             grub(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/hamster.vim

@@ -1,8 +1,8 @@
 " Vim filetype plugin
 " Language:    Hamster Script
 " Version:     2.0.6.0
-" Maintainer:  David Fishburn <fishburn@ianywhere.com>
+" Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
-" Last Change: Wed Nov 08 2006 12:03:09 PM
+" Last Change: 2017 Mar 07
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -13,6 +13,7 @@ endif
 let b:did_ftplugin = 1
 
 let s:cpo_save = &cpo
+set cpo&vim
 set cpo-=C
 
 let b:undo_ftplugin = "setl fo< com< tw< commentstring<"

runtime/ftplugin/haskell.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Haskell
+" Language:             Haskell
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/help.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Vim help file
+" Language:             Vim help file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/hostconf.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2007-12-04
+" Latest Revision:      2007-12-04
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/hostsaccess.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         hosts_access(5) control file
+" Language:             hosts_access(5) control file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/indent.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         indent(1) configuration file
+" Language:             indent(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/ld.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         ld(1) script
+" Language:             ld(1) script
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/lftp.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         lftp(1) configuration file
+" Language:             lftp(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/libao.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         libao.conf(5) configuration file
+" Language:             libao.conf(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/limits.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         limits(5) configuration file
+" Language:             limits(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/loginaccess.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         login.access(5) configuration file
+" Language:             login.access(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/logindefs.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         login.defs(5) configuration file
+" Language:             login.defs(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/m4.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         m4
+" Language:             m4
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/mailaliases.vim

@@ -1,6 +1,6 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/mailcap.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Mailcap configuration file
+" Language:             Mailcap configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/manconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         man.conf(5) - man configuration file
+" Language:             man.conf(5) - man configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/modconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         modules.conf(5) configuration file
+" Language:             modules.conf(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/mplayerconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         mplayer(1) configuration file
+" Language:             mplayer(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/muttrc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         mutt RC File
+" Language:             mutt RC File
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2006-04-19
+" Latest Revision:      2006-04-19
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/nanorc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         nanorc(5) - GNU nano configuration file
+" Language:             nanorc(5) - GNU nano configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/netrc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         netrc(5) configuration file
+" Language:             netrc(5) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/nsis.vim

@@ -1,7 +1,7 @@
 " Vim ftplugin file
-" Language:         NSIS script
+" Language:             NSIS script
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 let s:cpo_save = &cpo
 set cpo&vim

runtime/ftplugin/pamconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         pam(8) configuration file
+" Language:             pam(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/passwd.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         passwd(5) password file
+" Language:             passwd(5) password file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/pinfo.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         pinfo(1) configuration file
+" Language:             pinfo(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/procmail.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         procmail(1) configuration file
+" Language:             procmail(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/prolog.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Prolog
+" Language:             Prolog
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/protocols.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         protocols(5) - Internet protocols definition file
+" Language:             protocols(5) - Internet protocols definition file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/quake.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Quake[1-3] configuration file
+" Language:             Quake[1-3] configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/racc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Racc input file
+" Language:             Racc input file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/readline.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         readline(3) configuration file
+" Language:             readline(3) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/rnc.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Relax NG compact syntax
+" Language:             Relax NG compact syntax
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/rst.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         reStructuredText documentation format
+" Language:             reStructuredText documentation format
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/screen.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         screen(1) configuration file
+" Language:             screen(1) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/sensors.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         sensors.conf(5) - libsensors configuration file
+" Language:             sensors.conf(5) - libsensors configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/services.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         services(5) - Internet network services list
+" Language:             services(5) - Internet network services list
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/setserial.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         setserial(8) configuration file
+" Language:             setserial(8) configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/sieve.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         Sieve filtering language input file
+" Language:             Sieve filtering language input file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/slpconf.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         RFC 2614 - An API for Service Location configuration file
+" Language:             RFC 2614 - An API for Service Location configuration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/slpreg.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
-" Language:         RFC 2614 - An API for Service Location registration file
+" Language:             RFC 2614 - An API for Service Location registration file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Latest Revision:      2008-07-09
 
 if exists("b:did_ftplugin")
   finish