- It's clear that :s and :& are Ex commands, so remove "command" along
with the duplicate "the".
- Use "or" instead of "and" following "without".
closes: #15527
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Problem: completion is inserted on Enter with "noselect"
(Carman Fu)
Solution: check noselect before update compl_shown_match
(glepnir)
fixes: #15526closes: #15530
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: mode() returns wrong value with <Cmd> mapping
Solution: Change decision priority of VIsual_active and move
visual mode a bit further down (kuuote)
closes: #15533
Signed-off-by: kuuote <znmxodq1@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: Segfault with uninitialized funcref
(Daniel Viberg)
Solution: Check the Funcref for being Null before trying to access it
(Ernie Rael)
fixes: #15523
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Analyzing failed screendumps is hard
Solution: Facilitate the viewing of rendered screendumps under src/
add some documentation on how to use the viewdumps.vim
script (Aliaksei Budavei)
With the submitted "viewdumps.vim" script, a few manual
steps in typical workflows (see below) can be automated.
The updated "README.txt" contains additional information.
============================================================
Reviewing LOCAL failed screendump tests can be arranged as
follows:
1) Run tests and generate screendumps:
------------------------------------------------------------
cd /path/to/fork/src/testdir
make
------------------------------------------------------------
2) Examine the screendumps from the "failed" directory:
------------------------------------------------------------
../vim -u NONE -S viewdumps.vim
------------------------------------------------------------
============================================================
Reviewing UPLOADED failed screendump tests can be arranged
as follows (it can be further locally scripted):
1) Fetch an artifact with failed screendumps from
"github.com/vim/vim/actions/runs/A_ID/artifacts/B_ID".
2) Extract the archived files:
------------------------------------------------------------
unzip /tmp/failed-tests.zip -d /tmp
------------------------------------------------------------
3) Set up the "dumps" directory. Create a symlink to
"/path/to/fork/dirs/dumps" in the extracted directories so
that term_dumpdiff() can be used. (The lookup algorithm
resolves "dumps" for every loaded filename. So, with
"/tmp/src/testdir/failed/*.dump" files passed as script
arguments, the algorithm will make the files in
"/tmp/src/testdir/dumps" queried.)
------------------------------------------------------------
cd /path/to/fork
ln -s $(pwd)/src/testdir/dumps /tmp/src/testdir/dumps
------------------------------------------------------------
4) Examine the extracted screendumps:
------------------------------------------------------------
./src/vim -u NONE -S src/testdir/viewdumps.vim \
/tmp/src/testdir/failed/*.dump
------------------------------------------------------------
5) Clean up:
------------------------------------------------------------
unlink /tmp/src/testdir/dumps
rm -rf /tmp/src
------------------------------------------------------------
============================================================
Reviewing SUBMITTED FOR PULL REQUEST screendump tests can be
arranged as follows (it can be further locally scripted):
1) List the fetched changeset and write the changed "dumps"
filenames to "/tmp/filelist":
------------------------------------------------------------
cd /path/to/fork
git switch prs/1234
git diff-index --relative=src/testdir/dumps/ \
--name-only prs/1234~1 > /tmp/filelist
------------------------------------------------------------
2) Reconcile relative filepaths, and copy next-to-be-updated
"dumps" files in the "failed" directory (note the missing
new screendumps, if any):
------------------------------------------------------------
git switch master
cd src/testdir/dumps
test -d ../failed || mkdir ../failed
cp -t ../failed $(cat /tmp/filelist)
------------------------------------------------------------
3) Remember about the introduced INVERTED relation between
"dumps" and "failed", i.e. the files to be committed are in
"dumps" already and their previous versions are in "failed";
therefore, copy the missing new screendumps from "dumps" to
"failed" (otherwise these won't be shown):
------------------------------------------------------------
git switch prs/1234
cp -t ../failed foo_10.dump foo_11.dump foo_12.dump
------------------------------------------------------------
4) Examine the screendumps from the "failed" directory (new
screendumps will be shown with no difference between their
versions):
------------------------------------------------------------
cd ..
../vim -u NONE -S viewdumps.vim
------------------------------------------------------------
closes: #15515
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: VMS does not have defined uintptr_t
Solution: Add type definitions (Zoltan Arpadffy)
closes: #15520
Signed-off-by: Zoltan Arpadffy <zoltan.arpadffy@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Otherwise, if the executable to be verified does not exist,
this would cause a false-positive in the 'IsSafeExecutable()' check,
because 'exepath(executable)' returns an empty string and
'fnamemodify('', ':p:h')' returns the current directory and as a result
the 'IsSafeExecutable()' returns false (for the wrong reason).
Signed-off-by: Christian Brabandt <cb@256bit.org>
by removing the non-portable GNU variable and using $? instead
Note: this only works for rules with single dependencies.
closes: #15493
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Rename from w_closing to w_locked is incomplete
(after 9.1.0678).
Solution: Rename remaining occurrences of w_closing to w_locked and
update comments (zeertzjq).
closes: #15504
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- all: PMenuMatch and PMenuMatchSel for 8c/16c
- habamax:
- revert VertSplit to solid background color
- remove gitCommitSummary link to Title
- make TabLineFill same as StatuslineNC
closes: #15506
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The end marker must appear on line of its own without any trailing
whitespace.
Whitespace is incorrectly allowed before all end markers. Limiting this
only to heredocs where "trim" was specified, and with the correct
indent, is currently an intractable problem given that contained syntax
groups (in this case :let) cannot be limited to start patterns.
Highlight interpolated expressions when "eval" is specified.
cloess: #15511
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
It's a personal annoyance for me. I have to edit yaml files on a lot of
customer environments and whenever you type '#' at the start of the
line, the commented line will be indented by whatever indent the
previous line had.
I hate this seriously, because it makes un-commenting painful. So let's
fix this. But instead of messing with the indent function, let's just
remove the '0#' from cinkeys, so that Vim won't perform re-indenting
when commenting out such a yaml file.
closes: #15494
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in alist_add()
(SuyueGuo)
Solution: Lock the current window, so that the reference to
the argument list remains valid.
This fixes CVE-2024-43374
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :keeppatterns does not retain the substitute pattern
for a :s command
Solution: preserve the last substitute pattern when used with the
:keeppatterns command modifier (Gregory Anders)
closes: #15497
Signed-off-by: Gregory Anders <greg@gpanders.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
by removing the non-portable GNU variable and using $? instead
Note: this only works for rules with single dependencies.
closes: #15502
related: #15493
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
explicitly delete into the black-hole register
closes: #15499
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
by removing the non-portable GNU variable and using $? instead
Note: this only works for rules with single dependencies.
closes: #15503
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: style issues with man pages
Solution: update man pages and test_xxd.vim, since it uses
the xxd man page (RestorerZ)
closes: #15489
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Patch v9.1.0674 causes problems
Solution: Revert it for now
Revert "patch 9.1.0674: Vim9: compiling abstract method fails because of missing return"
This reverts commit 7477861e0d.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Inside batch files, for-variables must be written as %%i, not %i.
closes: #15453
Signed-off-by: Ken Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Closing parentheses were often highlighted as errors.
Add a syntax sync command to reduce the error.
Also fix that `defined` was not highlighted as an operator inside
parentheses. E.g.:
```
if defined foo (
if defined bar (
...
)
)
```
The first `defined` was highlighted but the second one was not.
related: #15453
Signed-off-by: Ken Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
It addresses the following issues:
- Fix highlight of let and var javascript keywords
According to runtime/doc/syntax.txt, Identifier is for variable names.
let/var are not variable names, they are keywords
- Add highlighting for "from" keyword in javascript
- Fix highlight of function keyword in javascript
According to docs, Function is for function names, so the function
keyword should just be Keyword.
- Fix highlight of static keyword in javascript
According to vim docs: StorageClass static, register, volatile, etc.
closes: #15480
Signed-off-by: Tobiasz Laskowski <tobil4sk@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: too recursive func calls when calling super-class method
with non-overriden super-call methods. (Aliaksei Budavei)
Solution: use interface method, when super is to be used (Ernie Rael)
When compiling "super.Func()" force class context to class that defines
function that is doing "super.Func()".
ISN_METHODCALL arg "cmf_is_super" for specific ufunc.
fixes: #15448fixes: #15463 (2) super.method may not execute in context of defining
class
closes: #15477
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
With the submitted "viewdumps.vim" script, a few manual
steps in typical workflows (see below) can be automated.
The updated "README.txt" contains additional information.
============================================================
Reviewing LOCAL failed syntax tests can be arranged as
follows:
1) Run tests and generate screendumps:
------------------------------------------------------------
cd /path/to/fork/runtime/syntax
make clean test
------------------------------------------------------------
2) Examine the screendumps from the "failed" directory:
------------------------------------------------------------
../../src/vim --clean -S testdir/viewdumps.vim
------------------------------------------------------------
============================================================
Reviewing UPLOADED failed syntax tests can be arranged as
follows (it can be further locally scripted):
1) Fetch an artifact with failed screendumps from
"github.com/vim/vim/actions/runs/A_ID/artifacts/B_ID".
2) Extract the archived files:
------------------------------------------------------------
unzip /tmp/failed-tests.zip -d /tmp
------------------------------------------------------------
3) Set up the "dumps" directory. Create a symlink to
"/path/to/fork/dirs/dumps" in the extracted directories so
that term_dumpdiff() can be used. (The lookup algorithm
resolves "dumps" for every loaded filename. So, with
"/tmp/runtime/syntax/testdir/failed/*.dump" files passed
as script arguments, the algorithm will make the files in
"/tmp/runtime/syntax/testdir/dumps" queried.)
------------------------------------------------------------
cd /path/to/fork
ln -s $(pwd)/runtime/syntax/testdir/dumps \
/tmp/runtime/syntax/testdir/dumps
------------------------------------------------------------
4) Examine the extracted screendumps:
------------------------------------------------------------
./src/vim --clean -S runtime/syntax/testdir/viewdumps.vim \
/tmp/runtime/syntax/testdir/failed/*.dump
------------------------------------------------------------
5) Clean up:
------------------------------------------------------------
unlink /tmp/runtime/syntax/testdir/dumps
rm -rf /tmp/runtime
------------------------------------------------------------
============================================================
Reviewing SUBMITTED FOR PULL REQUEST syntax tests can be
arranged as follows (it can be further locally scripted):
1) List the fetched changeset and write the changed "dumps"
filenames to "/tmp/filelist":
------------------------------------------------------------
cd /path/to/fork
git switch prs/1234
git diff-index --relative=runtime/syntax/testdir/dumps/ \
--name-only prs/1234~1 > /tmp/filelist
------------------------------------------------------------
2) Reconcile relative filepaths, and copy next-to-be-updated
"dumps" files in the "failed" directory (note the missing
new screendumps, if any):
------------------------------------------------------------
git switch master
cd runtime/syntax/testdir/dumps
cp -t ../failed $(cat /tmp/filelist)
------------------------------------------------------------
3) Remember about the introduced INVERTED relation between
"dumps" and "failed", i.e. the files to be committed are in
"dumps" already and their previous versions are in "failed";
therefore, copy the missing new screendumps from "dumps" to
"failed" (otherwise these won't be shown):
------------------------------------------------------------
git switch prs/1234
cp -t ../failed foo_10.dump foo_11.dump foo_12.dump
------------------------------------------------------------
4) Examine the screendumps from the "failed" directory (new
screendumps will be shown with no difference between their
versions):
------------------------------------------------------------
cd ..
../../../src/vim --clean -S viewdumps.vim
------------------------------------------------------------
closes: #15476
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: marker folds may get corrupted on undo (Yousef Mohammed)
Solution: when adjusting folds, make sure that line1 is the lower limit
and line2 is the upper line limit. In particular, line2 should
not be able to get smaller than line1.
fixes: #15455closes: #15466
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: crash with WinNewPre autocommand, because window
structures are not yet safe to use
Solution: Don't trigger WinNewPre on :tabnew
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: po file encoding fails on *BSD during make
Solution: instead of using `$<` make use of variable `$?` which should
be equivalent when the rule is dependent on only a single
file (RestorerZ).
closes: #15471
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
It caused differences from Unix-like systems. Make sure that the same
files are generated both on Windows and Unix.
fixes: #14490fixes: #14601closes: #15469
Also
- update a few more auto-generated po files
- Make_mvc.mak work with Cygwin/MSYS2's gettext by using copy /b instead
of copy /a
Signed-off-by: Ken Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: stable python ABI not used by default
Solution: Enable stable python ABI v3.8 when building with python3/dyn
by default, update the default Python3 version to 3.8 for
MS-Windows (Ken Takata)
closes: #15470
related: #15457
Signed-off-by: Ken Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
