- Match full :mark and :k commands.
- Match 2 and 3 letter :s repeat commands.
- Match :s [count] argument.
closes: #17408
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
And generalise the sourcing of "javaid.vim" for Java
buffers.
Resolves zzzyxwvut/java-vim#10.
closes: #17411
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: It is difficult to ignore all but some events.
Solution: Add support for a "-" prefix syntax in '(win)eventignore' that
subtracts an event from the ignored set if present
(Luuk van Baal).
closes: #17392
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
It is now possible to use omni-completion by adding the "o" flag to
'complete'
fixes: #17393
Co-authored-by: Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Match comments and trailing bar after :set without args.
- Match the <...> form for key code options.
- Remove orphaned vim_ex_python[3x]* dump files (Aliaksei Budavei).
closes: #17397
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: configures GUI auto detection favors GTK2
Solution: make configure favor GTK3 over GTK2 for the GUI
when auto detecting the gui toolkit (Drew Vogel).
Prior to these changes if the dev packages for both GTK2 and GTK3 were
installed, the `--enable-gui=auto` would used GTK2. After these changes
it will use GTK3. Users can still use `--enable-gui=gtk2` to
specifically select GTK2.
In addition to the prioritization change, this also brings some cleanups
to the GTK autoconf code:
* The `AM_PATH_GTK` macro had an unused third argument that has been
removed.
* The `AM_PATH_GTK` macro checked the `SKIP_GTK2` & `SKIP_GTK3`
variables but the code that decided whether to call it also checked
those. Now just the calling code does so.
* The `AM_PATH_GTK` macro set a default minimum version based on
`SKIP_GTK2` and `SKIP_GTK3` but the calling code was also expected to
pass a version. Now the calling code _must_ pass a version.
* The GTK test program previous used `gtk_(major|minor|micro)_version`
as all of: a C variable name, a C macro provided only by GTK2, and an
autoconf variable name. It also needlessly parsed a `x.y.z` version
string when the same string was already parsed by autoconf + sed. Now
the parsed values are used directly in the test program.
* The GTK test program previous created a test program `conf.gtktest`
which was cleaned up by the autoconf script. This appeared to be a
crude way to debug whether an erroring configure run had actually run
the test program. Instead the autoconf script now outputs more messaging
and the user can check `config.log` to determine the status of the
configure script.
I'm not an autoconf expert and I don't have access to some of the older
systems we try to support with gvim. So I would very much appreciate if
anyone could run this on their systems to ensure it doesn't misbehave.
While my motivation here is mainly to further establish GTK3 as the
primary GUI mode, this should at least partially address the concern
described in #15437.
Here are a few test runs with both GTK 2 and GTK 3 installed:
```
--with-features=huge \
--enable-gui \
--enable-gtk3-check=no \
--enable-gtktest \
```
```
checking --enable-gui argument... yes/auto - automatic GUI support
checking whether or not to look for GTK+ 2... yes
checking whether or not to look for GNOME... no
checking whether or not to look for GTK+ 3... no
checking whether or not to look for Motif... yes
checking for pkg-config... /usr/bin/pkg-config
checking --disable-gtktest argument... gtk test enabled
checking for pkg-config gtk+-2.0... found
checking for GTK - version >= 2.2.0... yes; found version 2.24.33
checking ability to compile GTK test program... yes
```
```
--with-features=huge \
--enable-gui \
--enable-gtk2-check=no \
--enable-gtktest \
```
```
checking --enable-gui argument... yes/auto - automatic GUI support
checking whether or not to look for GTK+ 2... no
checking whether or not to look for GTK+ 3... yes
checking whether or not to look for Motif... yes
checking for pkg-config... /usr/bin/pkg-config
checking --disable-gtktest argument... gtk test enabled
checking for pkg-config gtk+-3.0... found
checking for GTK - version >= 3.0.0... yes; found version 3.24.49
checking ability to compile GTK test program... yes
```
```
--with-features=huge \
```
```
checking --enable-gui argument... yes/auto - automatic GUI support
checking whether or not to look for GTK+ 2... yes
checking whether or not to look for GNOME... no
checking whether or not to look for GTK+ 3... yes
checking whether or not to look for Motif... yes
checking for pkg-config... /usr/bin/pkg-config
checking --disable-gtktest argument... gtk test enabled
checking for pkg-config gtk+-3.0... found
checking for GTK - version >= 3.0.0... yes; found version 3.24.49
checking ability to compile GTK test program... yes
```
```
--with-features=huge \
--disable-gtktest \
```
```
checking --enable-gui argument... yes/auto - automatic GUI support
checking whether or not to look for GTK+ 2... yes
checking whether or not to look for GNOME... no
checking whether or not to look for GTK+ 3... yes
checking whether or not to look for Motif... yes
checking for pkg-config... /usr/bin/pkg-config
checking --disable-gtktest argument... gtk test disabled
checking for pkg-config gtk+-3.0... found
checking for GTK - version >= 3.0.0... yes; found version 3.24.49
```
```
--with-features=huge \
--enable-gui=gtk2 \
```
```
checking --enable-gui argument... GTK+ 2.x GUI support
checking for pkg-config... /usr/bin/pkg-config
checking --disable-gtktest argument... gtk test enabled
checking for pkg-config gtk+-2.0... found
checking for GTK - version >= 2.2.0... yes; found version 2.24.33
checking ability to compile GTK test program... yes
```
```
--with-features=huge \
--enable-gui=gtk3 \
```
```
checking --enable-gui argument... GTK+ 3.x GUI support
checking for pkg-config... /usr/bin/pkg-config
checking --disable-gtktest argument... gtk test enabled
checking for pkg-config gtk+-3.0... found
checking for GTK - version >= 3.0.0... yes; found version 3.24.49
checking ability to compile GTK test program... yes
```
And here is a similar run with the GTK 3 dev package removed:
```
--with-features=huge \
--enable-gui=gtk3 \
--enable-fail-if-missing \
```
```
checking --disable-gtktest argument... gtk test enabled
checking for pkg-config gtk+-3.0... no; consider installing your distro
GTK -dev package
configure: error: pkg-config could not find gtk+-3.0
```
closes: #17369
Signed-off-by: Drew Vogel <dvogel@github>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: missing info about register completion in complete_info()
(after v9.1.1408)
Solution: update documentation and mention that register is used as
source, add a test (glepnir)
closes: #17389
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: using f-flag in 'complete' conflicts with Neovims filename
completion (glepnir, after v9.1.1301).
Solution: use upper-case "F" flag for completion functions
(Girish Palya).
fixes: #17347closes: #17378
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not easily possible to complete from register content
Solution: add register-completion submode using i_CTRL-X_CTRL-R
(glepnir)
closes: #17354
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: wrong link to Chapter 2 in vim-01-beginner.tutor
Solution: Fix the link to Chapter 2, add test for links in tutor files
(Phạm Bình An)
In order to write the test, I expose the function `s:GlobTutorials` as
`tutor#GlobTutorials` and make it also accept a `locale` argument.
closes: #17356
Signed-off-by: Phạm Bình An <111893501+brianhuster@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Fixed syntax highlighting for ksh93 namespace variables starting
with '${.'
- Added support for the alarm, eloop, fds, mkservice, pids, poll and
sha2sum builtins (which are indeed ksh93 builtins, albeit whether or
not they are available depends on the ksh release and the compiled
SHOPT options).
- Added support for the many Unix commands provided by ksh93's libcmd
as builtin commands (since these are general commands, scripts for
other shells like bash will also highlight these).
- The dumps for the sh_0{2,5,6,8,9}.sh were recreated due to this
change affecting commands those scripts call (e.g. 'wc').
- Enabled ${parameter/pattern/string} and friends for ksh syntax.
- Enabled case modification for ksh. See also:
https://github.com/ksh93/ksh/commit/c1762e03
- Enabled ;;& support for ksh. See also:
https://github.com/ksh93/ksh/commit/fc89d20a
- Added many special ksh variables using 93u+m's data/variables.c
as a reference.
If vim can't figure out which ksh release is in play using e.g.
the hashbang path, in such a case a generic default that enables
everything and the kitchen sink will be used. Otherwise, features will
be disabled if it's absolutely known a certain feature will not be
present. Examples:
- ERRNO is ksh88 specific, so that is locked to ksh88.
- Only 93u+m (assumed for generic) has SRANDOM, and only 93u+m
and 93v- have case modification support.
- 93u+ and 93v- have VPATH and CSWIDTH variables (the latter
is vestigal, but still present in the hardcoded variable table).
- 93v- and ksh2020 have (buggy and near unusable) implementations
of compgen and complete.
- Only mksh provides function substitutions, i.e. ${|command;}.
This took the better part of my day to implement. It seems to work well
enough though. (Also had to regenerate the dumps again while testing
it, as now there are dup scripts with mere hashbang differences, used
solely for testing syntax highlighting differences.)
closes: #17348
Signed-off-by: Johnothan King <johnothanking@protonmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
While at it, use `:lcd` to temporarily set the window local directory
instead of `:cd` for the global working directory.
fixes: #17334closes: #17339
Signed-off-by: Michele Sorcinelli <michelesr@autistici.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The Github repo link in the Contribution section has been
archived for 5 years. So people who want to contribute to the
tutor plugin should just send PR to Vim repo, similar to most
other Vim features, so there is no need for a Contribution
section in the plugin doc.
Solution: Replace it with an Original Author note at the beginning of
the help document.
closes: #17341
Signed-off-by: Phạm Bình An <111893501+brianhuster@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Match "autoload" as a keyword in :import commands.
- Match an expression argument for the filename.
closes: #15375
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Normalise interface heredoc highlighting with that used for
:let-heredocs.
- Remove interface feature testing. The Lua and Python interface
command scripts are now highlighted by default. Loading all syntax
files incurs an undesirable load-time burden so highlighting of the
less popular MzScheme, Perl, Ruby and Tcl interfaces is disabled by
default. g:vimsyn_embed can still be used to customise the supported
interfaces.
- Always highlight interface ex-commands as valid commands, even when
the corresponding command-script highlighting is disabled.
- Highlight simple command-script statements as well as heredocs.
- Remove error highlighting of heredoc and statement command-script
regions when an interface is disabled. These are now highlighted as
plain text.
- Allow indented heredoc end tokens when "trim" is specified.
- Match interface heredocs in :def functions.
- Fix runaway vimEmbedError regions. These regions have been removed.
- Use python2 syntax for :python, and :pythonx when 'pyxversion' is
appropriately set.
closes: #15522
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The 'grepformat' option is global option, but it would be
useful to have it buffer-local, similar to 'errorformat' and
other quickfix related options (Dani Dickstein)
Solution: Add the necessary code to support global-local 'grepformat',
allowing different buffers to parse different grep output
formats (glepnir)
fixes: #17316closes: #17315
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Previously the incorrect regexp forced title to be a single letter
because of using '+' instead of the '\+' regexp modifier.
closes: #17321
Signed-off-by: Alexander Abrosimov <alexander.n.abrosimov@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim does not have a tabpanel
Solution: include the tabpanel feature
(Naruhiko Nishino, thinca)
closes: #17263
Co-authored-by: thinca <thinca@gmail.com>
Signed-off-by: Naruhiko Nishino <naru123456789@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: still some problem with the new tutors filetype plugin
Solution: refactor code to enable/disable tutor mode into
tutor#EnableInteractive() function, include a test
(Phạm Bình An)
I find it annoying that Tutor's interactive mode is always on (or debug
mode is off) even when I open a tutor file with :edit command.
I think it makes more sense to make this "interactive mode":
- Always on when it is opened with :Tutor command
- Off otherwise
For more references, see `:help` feature, it is a much better than
:Tutor, since I don't have to run `:let g:help_debug = 1` just to be able
to edit and save a help file
Therefore, I remove `g:tutor_debug`
closes: #17299
Signed-off-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The CheckVimScriptURL() function does not work properly on
pwershell. Most likely this is because curl is aliased to
Invoke-WebRequest on Powershell and redirection seems to work
slightly different
Solution: Disable CheckVimScriptURL() on Powershell and then simplify
the curl download logic
Signed-off-by: Christian Brabandt <cb@256bit.org>
=============== LIMITATIONS AND OBSERVATIONS ===============
* Remember that external-type names can only be found when
they match filenames resolvable in "&path" with "import"
declarations; load the source file of an external type to
look up its nested types and sibling top types, if any.
* Strive to narrow the search by assigning only relevant
pathnames for directories *or* an archive to "&path", e.g.
":set path-=/usr/include".
* Use "{Visual}gf" on fully-qualified names.
* Accept the fact that "&define" cannot contain end-of-line
characters (":help definition-search"). A declaration
whose matchable header is not contained within a line can
be found iff all of its non-optional components belong to
the same line; for types, such components are a keyword,
e.g. "class", followed by a run of blank characters and
an identifier, e.g. "Test"; for methods: a return type,
e.g. "String", or a keyword "void", followed by a run of
blank characters and an identifier, e.g. "toString", that
is followed by "(".
* The members of the "java.lang" package are usually not
associated with "import" declarations; to look up their
declarations, load a source file for a member of that
package, and then use, on a simple name of interest for
a member, either "[-Ctrl-d" etc. for local declarations
or "gf" for external declarations, assuming that "." *or*
the appropriate pathname for a JDK archive is assigned to
"&path".
* Follow the above instruction made for the "java.lang"
members for any type whose simple name is not associated
with an "import" declaration, i.e. a member type of the
same package that is declared in another compilation unit.
* Append the "$" character to "&iskeyword" when looking up
declarations of generated code.
See zzzyxwvut/java-vim#4.
closes: #17281
Co-authored-by: Konfekt <Konfekt@users.noreply.github.com>
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Tag folding poses a few difficulties. Many elements, e.g.
"blockquote", are always delimited by start and end tags;
end tags for some elements, e.g. "p", can be omitted in
certain contexts; void elements, e.g. "hr", have no end tag.
Although the rules for supporting omissible end tags are
ad-hoc and involved, they apply to elements in scope.
Assuming syntactical wellformedness, an end tag can be
associated with its nearest matching start tag discoverable
in scope and towards the beginning of a file, whereas all
unbalanced tags and inlined tags can be disregarded.
For example:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<p>Paragraph #1. <!-- = : 2 -->
<p> <!-- >3 : 3 -->
Paragraph #2. <!-- = : 3 -->
</p> <!-- <3 : 3 -->
<p>Paragraph #3.</p> <!-- = : 2 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
(HTML comments here, "<!-- ... -->", record two values for
each folded line that are separated by ":", a value obtained
from "&foldexpr" and a value obtained from "foldlevel()".)
Innermost foldedable tags will be flattened. For example:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre><code> <!-- >4 : 4 -->
[CODE SNIPPET] <!-- = : 4 -->
</code></pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
No folding will be requested for the "<code>"-"</code>" tag
pair and reflected by "&foldexpr" because such a fold would
have claimed the same lines that the immediate fold of the
"<pre>"-"</pre>" tag already claims.
Run-on folded tags may confuse Vim. When a file such as:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET #1] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
<!-- = : 3 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET #2] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
is reformatted as follows:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET #1] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div><div class="block"><pre><code> <!-- <3 : 3 -->
[CODE SNIPPET #2] <!-- = : 2 ? -->
</code> <!-- <5 : 2 ? -->
</pre> <!-- <4 : 2 ? -->
</div> <!-- <3 : 2 ? -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
"&foldexpr" values will not be used as is for the lines
between (and including) "[CODE SNIPPET #2]" and "</div>".
(Cf. v9.1.0002.)
Having syntax highlighting in effect, tag folding using the
"fold-expr" method can be enabled with:
------------------------------------------------------------
let g:html_expr_folding = 1
------------------------------------------------------------
By default, tag folding will be redone from scratch after
each occurrence of a TextChanged or an InsertLeave event.
Such frequency may not be desired, especially for large
files, and this recomputation can be disabled with:
------------------------------------------------------------
let g:html_expr_folding_without_recomputation = 1
doautocmd FileType
------------------------------------------------------------
To force another recomputation, do:
------------------------------------------------------------
unlet! b:foldsmap
normal zx
------------------------------------------------------------
References:
https://web.archive.org/web/20250328105626/https://html.spec.whatwg.org/multipage/syntax.html#optional-tagshttps://en.wikipedia.org/wiki/Dangling_elsecloses: #17141
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Set g:tutor_debug on startup if it doesn't exist so that users can get
cmdline completion when interactively setting it.
- set b:undo_ftplugin in filetype plugin
- set default runtime file headers
closes: #17274
Signed-off-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Default to POSIX supported classes.
- Add a KornShell specific class list.
- Remove "or" from the Bash class list, presumably a typo.
closes: #17293
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Problem: Currently, 'smartcase' is respected when completing keywords
using <C-N>, <C-P>, <C-X><C-N>, and <C-X><C-P>. However, when
a user continues typing and the completion menu is filtered
using cached matches, 'smartcase' is not applied. This leads
to poor-quality or irrelevant completion suggestions, as shown
in the example below.
Solution: When filtering cached completion items after typing additional
characters, apply case-sensitive comparison if 'smartcase' is
enabled and the typed pattern includes uppercase characters.
This ensures consistent and expected completion behavior.
(Girish Palya)
closes: #17271
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: GTK3 and GTK4 will drop numeric cursor support.
Solution: Adopt GTK3 code and use CSS cursor convention (Drew Vogel).
closes: #14610
Signed-off-by: Drew Vogel <dvogel@github>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Adds the following changes:
- New Maintainer: Pete Kenny
- New filetypes supported (asciidoc, html, tex, vim, xhtml)
- improved Markdown support
- Sanitised ToCs and popup presentation
- Configuration improvements and options
- Add helptoc.txt help file
closes: #17255
Signed-off-by: Peter Kenny <github.com@k1w1.cyou>
Signed-off-by: Christian Brabandt <cb@256bit.org>
