Problem:
Cannot use `nvim_open_term()` to pipe terminal scrollback > 100000
Solution:
Increase scrollback limit to 1000000
If there's no technical consequences of doing this, can be set even
higher in the future.
Problem: The maximum search count uses a hard-coded value of 99
(Andres Monge, Joschua Kesper)
Solution: Make it configurable using the 'maxsearchcount' option.
related: vim/vim#8855fixes: vim/vim#17527closes: vim/vim#17695b7b7fa04bf
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: winborder option only supported predefined styles and lacked support for custom border characters.
Solution: implement parsing for comma-separated list format that allows specifying 8 individual border characters (topleft, top, topright, right, botright, bottom, botleft, left).
Problem: completion: search completion match may differ in case
(techntools)
Solution: add "exacttext" to 'wildoptions' value (Girish Palya)
This flag does the following:
exacttext
When this flag is present, search pattern completion
(e.g., in |/|, |?|, |:s|, |:g|, |:v|, and |:vim|)
shows exact buffer text as menu items, without
preserving regex artifacts like position
anchors (e.g., |/\<|). This provides more intuitive
menu items that match the actual buffer text. However,
searches may be less accurate since the pattern is not
preserved exactly.
By default, Vim preserves the typed pattern (with
anchors) and appends the matched word. This preserves
search correctness, especially when using regular
expressions or with 'smartcase' enabled. However, the
case of the appended matched word may not exactly
match the case of the word in the buffer.
fixes: vim/vim#17654closes: vim/vim#1766793c2d5bf7f
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: completion: can only complete from keyword characters
Solution: remove this restriction, allow completion functions when
called from i_CTRL-N/i_CTRL-P to be triggered from non-keyword
characters (Girish Palya)
Previously, functions specified in the `'complete'` option were
restricted to starting completion only from keyword characters (as
introduced in PR 17065). This change removes that restriction.
With this change, user-defined functions (e.g., `omnifunc`, `userfunc`)
used in `'complete'` can now initiate completion even when triggered
from non-keyword characters. This makes it easier to reuse existing
functions alongside other sources without having to consider whether the
cursor is on a keyword or non-keyword character, or worry about where
the replacement should begin (i.e., the `findstart=1` return value).
The logic for both the “collection” and “filtering” phases now fully
respects each source’s specified start column. This also extends to
fuzzy matching, making completions more predictable.
Internally, this builds on previously merged infrastructure that tracks
per-source metadata. This PR focuses on applying that metadata to
compute the leader string and insertion text appropriately for each
match.
Also, a memory corruption has been fixed in prepare_cpt_compl_funcs().
closes: vim/vim#17651ba11e78f1d
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: 'wildchar' does not work in search contexts
Solution: implement search completion when 'wildchar' is typed
(Girish Palya).
This change enhances Vim's command-line completion by extending
'wildmode' behavior to search pattern contexts, including:
- '/' and '?' search commands
- ':s', ':g', ':v', and ':vim' commands
Completions preserve the exact regex pattern typed by the user,
appending the completed word directly to the original input. This
ensures that all regex elements — such as '<', '^', grouping brackets
'()', wildcards '\*', '.', and other special characters — remain intact
and in their original positions.
---
**Use Case**
While searching (using `/` or `?`) for lines containing a pattern like
`"foobar"`, you can now type a partial pattern (e.g., `/f`) followed by
a trigger key (`wildchar`) to open a **popup completion menu** showing
all matching words.
This offers two key benefits:
1. **Precision**: Select the exact word you're looking for without
typing it fully.
2. **Memory aid**: When you can’t recall a full function or variable
name, typing a few letters helps you visually identify and complete the
correct symbol.
---
**What’s New**
Completion is now supported in the following contexts:
- `/` and `?` search commands
- `:s`, `:g`, `:v`, and `:vimgrep` ex-commands
---
**Design Notes**
- While `'wildchar'` (usually `<Tab>`) triggers completion, you'll have
to use `<CTRL-V><Tab>` or "\t" to search for a literal tab.
- **Responsiveness**: Search remains responsive because it checks for
user input frequently.
---
**Try It Out**
Basic setup using the default `<Tab>` as the completion trigger:
```vim
set wim=noselect,full wop=pum wmnu
```
Now type:
```
/foo<Tab>
```
This opens a completion popup for matches containing "foo".
For matches beginning with "foo" type `/\<foo<Tab>`.
---
**Optional: Autocompletion**
For automatic popup menu completion as you type in search or `:`
commands, include this in your `.vimrc`:
```vim
vim9script
set wim=noselect:lastused,full wop=pum wcm=<C-@> wmnu
autocmd CmdlineChanged [:/?] CmdComplete()
def CmdComplete()
var [cmdline, curpos, cmdmode] = [getcmdline(), getcmdpos(),
expand('<afile>') == ':']
var trigger_char = '\%(\w\|[*/:.-]\)$'
var not_trigger_char = '^\%(\d\|,\|+\|-\)\+$' # Exclude numeric range
if getchar(1, {number: true}) == 0 # Typehead is empty, no more
pasted input
&& !wildmenumode() && curpos == cmdline->len() + 1
&& (!cmdmode || (cmdline =~ trigger_char && cmdline !~
not_trigger_char))
SkipCmdlineChanged()
feedkeys("\<C-@>", "t")
timer_start(0, (_) => getcmdline()->substitute('\%x00', '',
'ge')->setcmdline()) # Remove <C-@>
endif
enddef
def SkipCmdlineChanged(key = ''): string
set ei+=CmdlineChanged
timer_start(0, (_) => execute('set ei-=CmdlineChanged'))
return key == '' ? '' : ((wildmenumode() ? "\<C-E>" : '') .. key)
enddef
**Optional: Preserve history recall behavior**
cnoremap <expr> <Up> SkipCmdlineChanged("\<Up>")
cnoremap <expr> <Down> SkipCmdlineChanged("\<Down>")
**Optional: Customize popup height**
autocmd CmdlineEnter : set bo+=error | exec $'set ph={max([10,
winheight(0) - 4])}'
autocmd CmdlineEnter [/?] set bo+=error | set ph=8
autocmd CmdlineLeave [:/?] set bo-=error ph&
```
closes: vim/vim#175706b49fba8c8
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: File paths change from symlink to target path after :cd command
when editing files through symbolic links
Solution: Add "~" flag to 'cpoptions' to control symlink resolution.
When not included (default), symlinks are resolved maintaining
backward compatibility. When included, symlinks are preserved
providing the improved behavior. (glepnir)
related: neovim/neovim#15695closes: vim/vim#176284ade668fb6
fix(exrc): lua exrc files know their location
Problem:
'exrc' files are inherently bound to their location / workspace and
therefore require to "know" their location on the filesystem. However,
currently using `debug.getinfo(1, 'S')` returns `"<nvim>"`.
Solution:
Include the filepath as chunkname in `loadstring()` and `nlua_exec()`.
Before this commit, I had trouble finding information about configuring
the insert mode completion. In particular, it was not clear that the
'wildopt' config that I already had in my vimrc does not apply here.
Also, `insert.txt` barely mentioned 'completeopt' except when
describing popups (I was more interested in bash-like behavior
where the unique prefix of all completions is completed first).
I'm hoping these edits will make the relevant docs easier to find.
closes: vim/vim#17515053aee01f7
Co-authored-by: Ilya Grigoriev <ilyagr@users.noreply.github.com>
Problem: using f-flag in 'complete' conflicts with Neovims filename
completion (glepnir, after v9.1.1301).
Solution: use upper-case "F" flag for completion functions
(Girish Palya).
fixes: vim/vim#17347closes: vim/vim#1737814f6da5ba8
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: completion: not possible to limit number of matches
Solution: allow to limit the matches for 'complete' sources by using the
"{flag}^{limit}" notation (Girish Palya)
This change extends the 'complete' option to support limiting the
number of matches returned from individual completion sources.
**Rationale:** In large files, certain sources (such as the current
buffer) can generate an overwhelming number of matches, which may cause
more relevant results from other sources (e.g., LSP or tags) to be
pushed out of view. By specifying per-source match limits, the
completion menu remains balanced and diverse, improving visibility and
relevance of suggestions.
A caret (`^`) followed by a number can be appended to a source flag to
specify the maximum number of matches for that source. For example:
```
:set complete=.^9,w,u,t^5
```
In this configuration:
- The current buffer (`.`) will return up to 9 matches.
- The tag completion (`t`) will return up to 5 matches.
- Other sources (`w`, `u`) are not limited.
This feature is fully backward-compatible and does not affect behavior
when the `^count` suffix is not used.
The caret (`^`) was chosen as the delimiter because it is least likely
to appear in file names.
closes: vim/vim#170870ac1eb3555
Cherry-pick test_options.vim change from patch 9.1.1325.
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: completion: cannot configure completion functions with
'complete'
Solution: add support for setting completion functions using the f and o
flag for 'complete' (Girish Palya)
This change adds two new values to the `'complete'` (`'cpt'`) option:
- `f` – invokes the function specified by the `'completefunc'` option
- `f{func}` – invokes a specific function `{func}` (can be a string or `Funcref`)
These new flags extend keyword completion behavior (e.g., via `<C-N>` /
`<C-P>`) by allowing function-based sources to participate in standard keyword
completion.
**Key behaviors:**
- Multiple `f{func}` values can be specified, and all will be called in order.
- Functions should follow the interface defined in `:help complete-functions`.
- When using `f{func}`, escaping is required for spaces (with `\`) and commas
(with `\\`) in `Funcref` names.
- If a function sets `'refresh'` to `'always'`, it will be re-invoked on every
change to the input text. Otherwise, Vim will attempt to reuse and filter
existing matches as the input changes, which matches the default behavior of
other completion sources.
- Matches are inserted at the keyword boundary for consistency with other completion methods.
- If finding matches is time-consuming, `complete_check()` can be used to
maintain responsiveness.
- Completion matches are gathered in the sequence defined by the `'cpt'`
option, preserving source priority.
This feature increases flexibility of standard completion mechanism and may
reduce the need for external completion plugins for many users.
**Examples:**
Complete matches from [LSP](https://github.com/yegappan/lsp) client. Notice the use of `refresh: always` and `function()`.
```vim
set cpt+=ffunction("g:LspCompletor"\\,\ [5]). # maxitems = 5
def! g:LspCompletor(maxitems: number, findstart: number, base: string): any
if findstart == 1
return g:LspOmniFunc(findstart, base)
endif
return {words: g:LspOmniFunc(findstart, base)->slice(0, maxitems), refresh: 'always'}
enddef
autocmd VimEnter * g:LspOptionsSet({ autoComplete: false, omniComplete: true })
```
Complete matches from `:iabbrev`.
```vim
set cpt+=fAbbrevCompletor
def! g:AbbrevCompletor(findstart: number, base: string): any
if findstart > 0
var prefix = getline('.')->strpart(0, col('.') - 1)->matchstr('\S\+$')
if prefix->empty()
return -2
endif
return col('.') - prefix->len() - 1
endif
var lines = execute('ia', 'silent!')
if lines =~? gettext('No abbreviation found')
return v:none # Suppresses warning message
endif
var items = []
for line in lines->split("\n")
var m = line->matchlist('\v^i\s+\zs(\S+)\s+(.*)$')
if m->len() > 2 && m[1]->stridx(base) == 0
items->add({ word: m[1], info: m[2], dup: 1 })
endif
endfor
return items->empty() ? v:none :
items->sort((v1, v2) => v1.word < v2.word ? -1 : v1.word ==# v2.word ? 0 : 1)
enddef
```
**Auto-completion:**
Vim's standard completion frequently checks for user input while searching for
new matches. It is responsive irrespective of file size. This makes it
well-suited for smooth auto-completion. You can try with above examples:
```vim
set cot=menuone,popup,noselect inf
autocmd TextChangedI * InsComplete()
def InsComplete()
if getcharstr(1) == '' && getline('.')->strpart(0, col('.') - 1) =~ '\k$'
SkipTextChangedIEvent()
feedkeys("\<c-n>", "n")
endif
enddef
inoremap <silent> <c-e> <c-r>=<SID>SkipTextChangedIEvent()<cr><c-e>
def SkipTextChangedIEvent(): string
# Suppress next event caused by <c-e> (or <c-n> when no matches found)
set eventignore+=TextChangedI
timer_start(1, (_) => {
set eventignore-=TextChangedI
})
return ''
enddef
```
closes: vim/vim#17065cbe53191d0
Temporarily remove bufname completion with #if 0 to make merging easier.
Co-authored-by: Girish Palya <girishji@gmail.com>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: It is difficult to ignore all but some events.
Solution: Add support for a "-" prefix syntax in '(win)eventignore' that
subtracts an event from the ignored set if present
(Luuk van Baal).
8cc6d8b187
Problem: not easily possible to complete from register content
Solution: add register-completion submode using i_CTRL-X_CTRL-R
(glepnir)
closes: vim/vim#173540546068aae
Problem:
No way for a user to limit 'exrc' search in parent directories (compare
editorconfig.root).
Solution:
A configuration file can unset 'exrc', disabling the search for its
parent directories.
Problem: The 'grepformat' option is global option, but it would be
useful to have it buffer-local, similar to 'errorformat' and
other quickfix related options (Dani Dickstein)
Solution: Add the necessary code to support global-local 'grepformat',
allowing different buffers to parse different grep output
formats (glepnir)
fixes: vim/vim#17316closes: vim/vim#173157b9eb6389d
Co-authored-by: glepnir <glephunter@gmail.com>
feat(exrc): search exrc in parent directories
Problem:
`.nvim.lua` is only loaded from current directory, which is not flexible
when working from a subfolder of the project.
Solution:
Also search parent directories for configuration file.
Problem: Currently, 'smartcase' is respected when completing keywords
using <C-N>, <C-P>, <C-X><C-N>, and <C-X><C-P>. However, when
a user continues typing and the completion menu is filtered
using cached matches, 'smartcase' is not applied. This leads
to poor-quality or irrelevant completion suggestions, as shown
in the example below.
Solution: When filtering cached completion items after typing additional
characters, apply case-sensitive comparison if 'smartcase' is
enabled and the typed pattern includes uppercase characters.
This ensures consistent and expected completion behavior.
(Girish Palya)
closes: vim/vim#17271dc314053e1
Co-authored-by: Girish Palya <girishji@gmail.com>
clarify complete_match() documentation to better explain its backward
search behavior, argument handling, and return value format and add an
example of isexpand
closes: https://github.com/vim/vim/pull/17212ffc89e47d0
* feat(shada): don't store jumplist if '0 in 'shada'
* fix(shada): don't store search and sub patterns if /0 in 'shada'
* fix(shada): don't store empty replacement string
* fix(shada): don't add '0' mark if f0 in 'shada'
Problem: Cannot define completion triggers and act upon it
Solution: add the new option 'isexpand' and add the complete_match()
function to return the completion matches according to the
'isexpand' setting (glepnir)
Currently, completion trigger position is determined solely by the
'iskeyword' pattern (\k\+$), which causes issues when users need
different completion behaviors - such as triggering after '/' for
comments or '.' for methods. Modifying 'iskeyword' to include these
characters has undesirable side effects on other Vim functionality that
relies on keyword definitions.
Introduce a new buffer-local option 'isexpand' that allows specifying
different completion triggers and add the complete_match() function that
finds the appropriate start column for completion based on these
triggers, scanning backwards from cursor position.
This separation of concerns allows customized completion behavior
without affecting iskeyword-dependent features. The option's
buffer-local nature enables per-filetype completion triggers.
closes: vim/vim#16716bcd5995b40
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
Default 'statusline' is implemented in C and not representable as
a statusline expression. This makes it hard for user configs/plugins to
extend it.
Solution:
- Change the default 'statusline' slightly to a statusline expression.
- Remove the C implementation.
Problem: not possible to configure the completion menu truncation
character
Solution: add the "trunc" suboption to the 'fillchars' setting to
configure the truncation indicator (glepnir).
closes: vim/vim#17006b87620466c
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: During insert-mode completion, the most relevant match is often
the one closest to the cursor—frequently just above the current line.
However, both `<C-N>` and `<C-P>` tend to rank candidates from the
current buffer that appear above the cursor near the bottom of the
completion menu, rather than near the top. This ordering can feel
unintuitive, especially when `noselect` is active, as it doesn't
prioritize the most contextually relevant suggestions.
Solution: This change introduces a new sub-option value "nearest" for the
'completeopt' setting. When enabled, matches from the current buffer
are prioritized based on their proximity to the cursor position,
improving the relevance of suggestions during completion
(Girish Palya).
Key Details:
- Option: "nearest" added to 'completeopt'
- Applies to: Matches from the current buffer only
- Effect: Sorts completion candidates by their distance from the cursor
- Interaction with other options:
- Has no effect if the `fuzzy` option is also present
This feature is helpful especially when working within large buffers where
multiple similar matches may exist at different locations.
You can test this feature with auto-completion using the snippet below. Try it
in a large file like `vim/src/insexpand.c`, where you'll encounter many
potential matches. You'll notice that the popup menu now typically surfaces the
most relevant matches—those closest to the cursor—at the top. Sorting by
spatial proximity (i.e., contextual relevance) often produces more useful
matches than sorting purely by lexical distance ("fuzzy").
Another way to sort matches is by recency, using an LRU (Least Recently Used)
cache—essentially ranking candidates based on how recently they were used.
However, this is often overkill in practice, as spatial proximity (as provided
by the "nearest" option) is usually sufficient to surface the most relevant
matches.
```vim
set cot=menuone,popup,noselect,nearest inf
def SkipTextChangedIEvent(): string
# Suppress next event caused by <c-e> (or <c-n> when no matches found)
set eventignore+=TextChangedI
timer_start(1, (_) => {
set eventignore-=TextChangedI
})
return ''
enddef
autocmd TextChangedI * InsComplete()
def InsComplete()
if getcharstr(1) == '' && getline('.')->strpart(0, col('.') - 1) =~ '\k$'
SkipTextChangedIEvent()
feedkeys("\<c-n>", "n")
endif
enddef
inoremap <silent> <c-e> <c-r>=<SID>SkipTextChangedIEvent()<cr><c-e>
inoremap <silent><expr> <tab> pumvisible() ? "\<c-n>" : "\<tab>"
inoremap <silent><expr> <s-tab> pumvisible() ? "\<c-p>" : "\<s-tab>"
```
closes: vim/vim#17076b156588eb7
Co-authored-by: Girish Palya <girishji@gmail.com>
