vim-patch:61da1bfa6c6b

Update runtime files.
61da1bfa6c

runtime/doc/autocmd.txt

@@ -1351,7 +1351,7 @@ have changed autocommands, or when Vim has executed the wrong autocommands
 Note that the 'eventignore' option applies here too.  Events listed in this
 option will not cause any commands to be executed.
 
-					*:do* *:doau* *:doautocmd* *E217*
+				*:do* *:doau* *:doaut* *:doautocmd* *E217*
 :do[autocmd] [<nomodeline>] [group] {event} [fname]
 			Apply the autocommands matching [fname] (default:
 			current file name) for {event} to the current buffer.

runtime/doc/diff.txt

@@ -175,7 +175,7 @@ hidden buffers.  You can use ":hide" to close a window without unloading the
 buffer.  If you don't want a buffer to remain used for the diff do ":set
 nodiff" before hiding it.
 
-							*:dif* *:diffupdate*
+						*:dif* *:diff* *:diffupdate*
 :dif[fupdate][!]		Update the diff highlighting and folds.
 
 Vim attempts to keep the differences updated when you make changes to the

runtime/doc/editing.txt

@@ -555,7 +555,7 @@ You can use the argument list with the following commands, and with the
 expression functions |argc()| and |argv()|.  These all work on the argument
 list of the current window.
 
-							*:ar* *:args*
+							*:ar*  *:arg* *:args*
 :ar[gs]			Print the argument list, with the current file in
 			square brackets.
 

runtime/doc/eval.txt

@@ -9750,7 +9750,7 @@ This does NOT work: >
 			opposite of |:lockvar|.
 
 
-:if {expr1}			*:if* *:endif* *:en* *E171* *E579* *E580*
+:if {expr1}			*:if* *:end* *:endif* *:en* *E171* *E579* *E580*
 :en[dif]		Execute the commands until the next matching ":else"
 			or ":endif" if {expr1} evaluates to non-zero.
 

runtime/doc/fold.txt

@@ -436,7 +436,7 @@ zk		Move upwards to the end of the previous fold.  A closed fold
 
 EXECUTING COMMANDS ON FOLDS ~
 
-:[range]foldd[oopen] {cmd}			*:foldd* *:folddoopen*
+:[range]foldd[oopen] {cmd}			*:foldd* *:folddo* *:folddoopen*
 		Execute {cmd} on all lines that are not in a closed fold.
 		When [range] is given, only these lines are used.
 		Each time {cmd} is executed the cursor is positioned on the

runtime/doc/map.txt

@@ -39,7 +39,7 @@ modes.
 :om[ap]	{lhs} {rhs}		|mapmode-o|		*:om* *:omap*
 :map!	{lhs} {rhs}		|mapmode-ic|		*:map!*
 :im[ap]	{lhs} {rhs}		|mapmode-i|		*:im* *:imap*
-:lm[ap]	{lhs} {rhs}		|mapmode-l|		*:lm* *:lmap*
+:lm[ap]	{lhs} {rhs}		|mapmode-l|		*:lm* *:lma* *:lmap*
 :cm[ap]	{lhs} {rhs}		|mapmode-c|		*:cm* *:cmap*
 :tma[p]	{lhs} {rhs}		|mapmode-t|		*:tma* *:tmap*
 			Map the key sequence {lhs} to {rhs} for the modes
@@ -52,12 +52,12 @@ modes.
 :nn[oremap] {lhs} {rhs}		|mapmode-n|	*:nn*  *:nnoremap*
 :vn[oremap] {lhs} {rhs}		|mapmode-v|	*:vn*  *:vnoremap*
 :xn[oremap] {lhs} {rhs}		|mapmode-x|	*:xn*  *:xnoremap*
-:snor[emap] {lhs} {rhs}		|mapmode-s|	*:snor* *:snoremap*
+:snor[emap] {lhs} {rhs}		|mapmode-s|	*:snor* *:snore* *:snoremap*
 :ono[remap] {lhs} {rhs}		|mapmode-o|	*:ono* *:onoremap*
 :no[remap]! {lhs} {rhs}		|mapmode-ic|	*:no!* *:noremap!*
-:ino[remap] {lhs} {rhs}		|mapmode-i|	*:ino* *:inoremap*
+:ino[remap] {lhs} {rhs}		|mapmode-i|	*:ino* *:inor* *:inoremap*
 :ln[oremap] {lhs} {rhs}		|mapmode-l|	*:ln*  *:lnoremap*
-:cno[remap] {lhs} {rhs}		|mapmode-c|	*:cno* *:cnoremap*
+:cno[remap] {lhs} {rhs}		|mapmode-c|	*:cno* *:cnor* *:cnoremap*
 :tno[remap] {lhs} {rhs}		|mapmode-t|	*:tno* *:tnoremap*
 			Map the key sequence {lhs} to {rhs} for the modes
 			where the map command applies.  Disallow mapping of
@@ -74,7 +74,7 @@ modes.
 :unm[ap]! {lhs}			|mapmode-ic|		*:unm!* *:unmap!*
 :iu[nmap] {lhs}			|mapmode-i|		*:iu*   *:iunmap*
 :lu[nmap] {lhs}			|mapmode-l|		*:lu*   *:lunmap*
-:cu[nmap] {lhs}			|mapmode-c|		*:cu*   *:cunmap*
+:cu[nmap] {lhs}			|mapmode-c|		*:cu*   *:cun* *:cunmap*
 :tunma[p] {lhs}			|mapmode-t|		*:tunma* *:tunmap*
 			Remove the mapping of {lhs} for the modes where the
 			map command applies.  The mapping may remain defined
@@ -972,7 +972,7 @@ See |:verbose-cmd| for more information.
 :norea[bbrev] [<expr>] [<buffer>] [lhs] [rhs]
 			same as ":ab", but no remapping for this {rhs}
 
-						*:ca* *:cabbrev*
+						*:ca* *:cab* *:cabbrev*
 :ca[bbrev] [<expr>] [<buffer>] [lhs] [rhs]
 			same as ":ab", but for Command-line mode only.
 

runtime/doc/motion.txt

@@ -924,7 +924,7 @@ These commands are not marks themselves, but jump to a mark:
 [`			[count] times to lowercase mark before the cursor.
 
 
-:loc[kmarks] {command}					*:loc* *:lockmarks*
+:loc[kmarks] {command}				*:loc* *:lock* *:lockmarks*
 			Execute {command} without adjusting marks.  This is
 			useful when changing text in a way that the line count
 			will be the same when the change has completed.
@@ -950,7 +950,7 @@ These commands are not marks themselves, but jump to a mark:
 			- folds
 			- diffs
 
-:kee[pmarks] {command}					*:kee* *:keepmarks*
+:kee[pmarks] {command}				*:kee* *:keep* *:keepmarks*
 			Currently only has effect for the filter command
 			|:range!|:
 			- When the number of lines after filtering is equal to

runtime/doc/quickfix.txt

@@ -87,7 +87,7 @@ processing a quickfix or location list command, it will be aborted.
 :ll[!] [nr]		Same as ":cc", except the location list for the
 			current window is used instead of the quickfix list.
 
-							*:cn* *:cnext* *E553*
+						*:cn* *:cne* *:cnext* *E553*
 :[count]cn[ext][!]	Display the [count] next error in the list that
 			includes a file name.  If there are no file names at
 			all, go to the [count] next error.  See |:cc| for
@@ -177,7 +177,7 @@ processing a quickfix or location list command, it will be aborted.
 			'encoding' option, you can use the 'makeencoding'
 			option to specify the encoding.
 
-							*:lf* *:lfile*
+							*:lf* *:lfi* *:lfile*
 :lf[ile][!] [errorfile]	Same as ":cfile", except the location list for the
 			current window is used instead of the quickfix list.
 			You can not use the -q command-line option to set
@@ -192,7 +192,7 @@ processing a quickfix or location list command, it will be aborted.
 			option to specify the encoding.
 
 
-:lg[etfile] [errorfile]					*:lg* *:lgetfile*
+:lg[etfile] [errorfile]					*:lg* *:lge* *:lgetfile*
 			Same as ":cgetfile", except the location list for the
 			current window is used instead of the quickfix list.
 
@@ -230,7 +230,7 @@ processing a quickfix or location list command, it will be aborted.
 			the current window is used instead of the quickfix
 			list.
 
-							*:cad* *:caddbuffer*
+						*:cad* *:cadd* *:caddbuffer*
 :cad[dbuffer] [bufnr]	Read the error list from the current buffer and add
 			the errors to the current quickfix list.  If a
 			quickfix list is not present, then a new list is
@@ -277,7 +277,7 @@ processing a quickfix or location list command, it will be aborted.
 			Example: >
     :g/mypattern/caddexpr expand("%") . ":" . line(".") .  ":" . getline(".")
 <
-							*:lad* *:laddexpr*
+						*:lad* *:addd* *:laddexpr*
 :lad[dexpr] {expr}	Same as ":caddexpr", except the location list for the
 			current window is used instead of the quickfix list.
 

runtime/doc/starting.txt

@@ -731,7 +731,7 @@ vimrc file.
 			options to [file] (default ".exrc" in the current
 			directory).
 
-							*:mkv* *:mkvimrc*
+						*:mkv* *:mkvi* *:mkvimrc*
 :mkv[imrc][!] [file]	Like ":mkexrc", but the default is ".nvimrc" in the
 			current directory.  The ":version" command is also
 			written to the file.

runtime/doc/syntax.txt

@@ -5124,6 +5124,15 @@ load the syntax file.
 The command also deletes the "b:current_syntax" variable, since no syntax is
 loaded after this command.
 
+To clean up specific syntax groups for the current buffer: >
+  :syntax clear {group-name} ..
+This removes all patterns and keywords for {group-name}.
+
+To clean up specific syntax group lists for the current buffer: >
+  :syntax clear @{grouplist-name} ..
+This sets {grouplist-name}'s contents to an empty list.
+
+						*:syntax-off* *:syn-off*
 If you want to disable syntax highlighting for all buffers, you need to remove
 the autocommands that load the syntax files: >
   :syntax off
@@ -5133,14 +5142,6 @@ What this command actually does, is executing the command >
 See the "nosyntax.vim" file for details.  Note that for this to work
 $VIMRUNTIME must be valid.  See |$VIMRUNTIME|.
 
-To clean up specific syntax groups for the current buffer: >
-  :syntax clear {group-name} ..
-This removes all patterns and keywords for {group-name}.
-
-To clean up specific syntax group lists for the current buffer: >
-  :syntax clear @{grouplist-name} ..
-This sets {grouplist-name}'s contents to an empty list.
-
 						*:syntax-reset* *:syn-reset*
 If you have changed the colors and messed them up, use this command to get the
 defaults back: >

runtime/doc/tagsrch.txt

@@ -802,7 +802,7 @@ CTRL-W d		Open a new window, with the cursor on the first
 			(default: whole file).
 			See |:search-args| for [/] and [!].
 
-							*:che* *:checkpath*
+					*:che*  *:chec* *:check* *:checkpath*
 :che[ckpath]		List all the included files that could not be found.
 
 :che[ckpath]!		List all the included files.

runtime/doc/usr_06.txt

@@ -193,13 +193,12 @@ too slow, you might want to disable syntax highlighting for a moment: >
 
 When editing another file (or the same one) the colors will come back.
 
-							*:syn-off*
 If you want to stop highlighting completely use: >
 
 	:syntax off
 
 This will completely disable syntax highlighting and remove it immediately for
-all buffers.
+all buffers.  See |:syntax-off| for more details.
 
 							*:syn-manual*
 If you want syntax highlighting only for specific files, use this: >

runtime/doc/various.txt

@@ -283,7 +283,7 @@ g8			Print the hex values of the bytes used in the
 							*:!!*
 :!!			Repeat last ":!{cmd}".
 
-							*:ve* *:version*
+							*:ve* *:ver* *:version*
 :ve[rsion]		Print editor version and build information.
 			See also |feature-compile|.
 

runtime/doc/windows.txt

@@ -192,7 +192,7 @@ CTRL-W CTRL_N						*CTRL-W_CTRL-N*
 :[N]sv[iew] [++opt] [+cmd] {file}		*:sv* *:sview* *splitview*
 		Same as ":split", but set 'readonly' option for this buffer.
 
-:[N]sf[ind] [++opt] [+cmd] {file}		*:sf* *:sfind* *splitfind*
+:[N]sf[ind] [++opt] [+cmd] {file}	     *:sf* *:sfi* *:sfind* *splitfind*
 		Same as ":split", but search for {file} in 'path' like in
 		|:find|.  Doesn't split if {file} is not found.
 
@@ -1174,7 +1174,7 @@ list of buffers. |unlisted-buffer|
 		Uses 'switchbuf'.
 		Also see |+cmd|.
 
-:br[ewind][!] [+cmd]					*:br* *:brewind*
+:br[ewind][!] [+cmd]					*:br* *:bre* *:brewind*
 		Go to first buffer in buffer list.  If the buffer list is
 		empty, go to the first unlisted buffer.
 		See |:buffer-!| for [!].

runtime/syntax/fstab.vim

@@ -2,8 +2,8 @@
 " Language: fstab file
 " Maintainer: Radu Dineiu <radu.dineiu@gmail.com>
 " URL: https://raw.github.com/rid9/vim-fstab/master/fstab.vim
-" Last Change: 2017 Nov 09
+" Last Change: 2019 Jun 06
-" Version: 1.2
+" Version: 1.3
 "
 " Credits:
 "   David Necas (Yeti) <yeti@physics.muni.cz>
@@ -68,7 +68,7 @@ syn match fsOptionsString /[a-zA-Z0-9_-]\+/
 syn keyword fsOptionsYesNo yes no
 syn cluster fsOptionsCheckCluster contains=fsOptionsExt2Check,fsOptionsFatCheck
 syn keyword fsOptionsSize 512 1024 2048
-syn keyword fsOptionsGeneral async atime auto bind current defaults dev devgid devmode devmtime devuid dirsync exec force fstab kudzu loop mand move noatime noauto noclusterr noclusterw nodev nodevmtime nodiratime noexec nomand norelatime nosuid nosymfollow nouser owner rbind rdonly relatime remount ro rq rw suid suiddir supermount sw sync union update user users wxallowed xx
+syn keyword fsOptionsGeneral async atime auto bind current defaults dev devgid devmode devmtime devuid dirsync exec force fstab kudzu loop mand move noatime noauto noclusterr noclusterw nodev nodevmtime nodiratime noexec nomand norelatime nosuid nosymfollow nouser owner rbind rdonly relatime remount ro rq rw suid suiddir supermount sw sync union update user users wxallowed xx nofail
 syn match fsOptionsGeneral /_netdev/
 
 " Options: adfs

runtime/syntax/hitest.vim

@@ -1,8 +1,9 @@
 " Vim syntax file
 " Language:	none; used to see highlighting
 " Maintainer:	Ronald Schild <rs@scutum.de>
-" Last Change:	2017 Jul 28
+" Last Change:	2019 Jun 06
 " Version:	5.4n.1
+" Additional Changes By: Lifepillar, Bram
 
 " To see your current highlight settings, do
 "    :so $VIMRUNTIME/syntax/hitest.vim
@@ -12,6 +13,7 @@ let s:hidden      = &hidden
 let s:lazyredraw  = &lazyredraw
 let s:more	  = &more
 let s:report      = &report
+let s:whichwrap   = &whichwrap
 let s:shortmess   = &shortmess
 let s:wrapscan    = &wrapscan
 let s:register_a  = @a
@@ -19,10 +21,11 @@ let s:register_se = @/
 
 " set global options
 set hidden lazyredraw nomore report=99999 shortmess=aoOstTW wrapscan
+set whichwrap&
 
 " print current highlight settings into register a
 redir @a
-highlight
+silent highlight
 redir END
 
 " Open a new window if the current one isn't empty
@@ -34,25 +37,32 @@ endif
 edit Highlight\ test
 
 " set local options
-setlocal autoindent noexpandtab formatoptions=t shiftwidth=16 noswapfile tabstop=16
+setlocal autoindent noexpandtab formatoptions=t shiftwidth=18 noswapfile tabstop=18
 let &textwidth=&columns
 
 " insert highlight settings
 % delete
 put a
 
+" remove cleared groups
+silent! g/ cleared$/d
+
 " remove the colored xxx items
 g/xxx /s///e
 
 " remove color settings (not needed here)
 global! /links to/ substitute /\s.*$//e
 
+" Move split 'links to' lines to the same line
+% substitute /^\(\w\+\)\n\s*\(links to.*\)/\1\t\2/e
+
 " move linked groups to the end of file
 global /links to/ move $
 
 " move linked group names to the matching preferred groups
+" TODO: this fails if the group linked to isn't defined
 % substitute /^\(\w\+\)\s*\(links to\)\s*\(\w\+\)$/\3\t\2 \1/e
-global /links to/ normal mz3ElD0#$p'zdd
+silent! global /links to/ normal mz3ElD0#$p'zdd
 
 " delete empty lines
 global /^ *$/ delete
@@ -124,6 +134,7 @@ let &lazyredraw  = s:lazyredraw
 let &more	 = s:more
 let &report	 = s:report
 let &shortmess	 = s:shortmess
+let &whichwrap   = s:whichwrap
 let &wrapscan	 = s:wrapscan
 let @a		 = s:register_a
 
@@ -133,6 +144,6 @@ let @/ = s:register_se
 
 " remove variables
 unlet s:hidden s:lazyredraw s:more s:report s:shortmess
-unlet s:wrapscan s:register_a s:register_se
+unlet s:whichwrap s:wrapscan s:register_a s:register_se
 
 " vim: ts=8